Products

Victorious Automotive · Land Rover L320 · Exterior Mirror Covers Grey 2-Piece Rear View Mirror Covers for Land Rover Range Rover Sport L320 (2010–2013) A precision-moulded pair of ABS mirror covers engineered to refresh the exterior profile of the Range Rover Sport L320 — delivering a clean, factory-consistent finish with zero compromise on fit. L320 2010–2013 Grey Finish ABS Plastic Set of 2 Direct Fit Exterior Upgrade No Drilling Required OEM Part Ref: LR019961 / LR015056 Overview The Range Rover Sport L320 is a vehicle defined by its muscular proportions and considered exterior design. Every element of its bodywork — from the bold front fascia to the sculpted rear quarters — contributes to a purposeful visual identity that owners rightly want to protect and preserve. The door mirrors, sitting proud on each side, are among the most visible exterior components on the vehicle and among the most susceptible to weathering, stone chips, and general road wear over time. These grey mirror covers have been designed specifically for the L320 generation Range Rover Sport, providing a direct-replacement solution that clips neatly over the existing mirror housing without the need for cutting, drilling, or professional fitting. Moulded from high-grade ABS plastic, the covers offer a robust outer shell that guards the underlying mirror housing while delivering a refreshed, uniform appearance that sits naturally within the vehicle's design language. Supplied as a pair — both driver and passenger sides — these covers are a straightforward and cost-effective way to restore the original look of a tired exterior or add a subtle tonal contrast to the Sport's body. The grey finish works particularly well on darker body colours and integrates cleanly with factory chrome or black trim packages across the L320 model run. What's Included 🪞 Left Mirror Cover Driver-side cover, grey ABS finish 🪞 Right Mirror Cover Passenger-side cover, grey ABS finish 📦 Protective Packaging Securely boxed for transit protection 📋 Fitment Reference OEM part refs: LR019961 / LR015056 Product Highlights Supplied as a complete pair — left and right covers included Moulded from high-impact ABS plastic for long-term durability Grey finish — complements dark and mid-tone body colours OEM reference numbers LR019961 and LR015056 for accurate cross-referencing Clip-on fitment — no drilling, cutting or adhesive required Covers and protects the existing factory mirror housing Dimensions: 28 × 12 × 11.5 cm — precision-matched to L320 housings Compatible across the full 2010–2013 L320 Range Rover Sport production run Lightweight construction — no impact on mirror adjustment mechanism Suitable for LR2 and LR4 models sharing the same mirror housing architecture Compatibility Vehicle Model Code Year Range Fitment Range Rover Sport L320 2010–2013 Direct Fit Land Rover LR4 L319 2010–2014 Direct Fit Land Rover LR2 L359 2010–2014 Direct Fit Range Rover Vogue L322 2010–2012 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your vehicle? Call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility before you order. Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–25 minutes  |  Tools Required: None Ensure the vehicle is parked on a level surface and the mirror is in its default extended position. Clean the existing mirror housing thoroughly with a damp cloth to remove any dust, grime, or wax residue. Allow to dry completely before fitting. Hold the new cover against the mirror housing and align the internal clips with the corresponding mounting points on the factory housing. Apply firm, even pressure around the perimeter of the cover — you will hear or feel the clips engage as the cover seats into position. Inspect all edges to confirm a flush, even fit with no visible gaps. Repeat on the opposite side. Operate the electric mirror adjustment to confirm there is no interference with movement before driving. ⚠ Note: Do not force the cover into position. If resistance is felt, recheck the alignment of the internal clips against the housing. Forcing the cover may result in clip breakage. If your existing mirror housing is cracked or damaged, we recommend replacing the housing prior to fitting these covers. Built for Land Rover Owners Who Care At Victorious Automotive, every product we stock is chosen with the serious Land Rover owner in mind. These mirror covers ship worldwide via DHL, FedEx, UPS, and TNT — and are backed by our 30-day money-back guarantee. Browse All Range Rover Sport Accessories Buying two items? Save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and OEM part references are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Toyota LC250 · Exterior Styling Grille Decoration Strip for Toyota Land Cruiser 250 – LC250 Prado 2024–2025 A precision-fit ABS grille accent strip that refines the front fascia of the 2024–2025 Land Cruiser 250, adding a distinctly premium character without permanent modification. LC250 / Prado 2024–2025 ABS Material Gloss Black Fibre Pattern No-Drill Install Exterior Styling Direct Fit Overview The fifth-generation Land Cruiser 250 — sold globally as the Prado in many markets — represents Toyota's most refined interpretation of the nameplate to date. Its bold, structured grille is one of the most defining visual elements of the front end, and for owners who want to elevate that detail further, the factory finish leaves room for a more purposeful aesthetic. This Grille Decoration Strip is designed specifically for the 2024 and 2025 Land Cruiser 250. Manufactured from high-grade ABS plastic, it slots neatly across the grille aperture and introduces either a gloss black accent or a carbon fibre-style pattern finish, depending on the variant you choose. The result is a front end that reads as more considered and more aggressive — without altering a single body panel. Installation requires no drilling and no specialist tools. The strip is secured via 3M-grade automotive adhesive tape, bonding cleanly to the grille surface when properly prepared. For LC250 owners who want a quick-turn exterior upgrade that looks factory-finished, this is one of the most effective single-piece improvements available for the model. What's Included 🔲 Grille Decoration Strip × 1 ABS construction, pre-cut to LC250 grille profile 🔧 Pre-Applied Adhesive Tape 3M-grade backing for secure, residue-free bonding 📋 Installation Guide Step-by-step reference for clean fitment Product Highlights Precision-engineered for 2024–2025 Land Cruiser 250 grille geometry High-grade ABS construction for long-term durability and UV resistance Available in Gloss Black and Carbon Fibre Pattern finishes No-drill, paste-on installation — no permanent modification required Pre-applied automotive-grade adhesive backing for a secure hold Adds a more aggressive, styled appearance to the front fascia Lightweight construction — no impact on grille airflow or function Colour-matched to complement both dark and light LC250 body colours Easily removable without damage to the underlying grille surface Ships worldwide — fully tracked via DHL, FedEx, UPS, or TNT Compatibility Vehicle Year Range Trim / Grade Fitment Toyota Land Cruiser 250 (LC250) 2024–2025 All Grades Direct Fit Toyota Land Cruiser Prado (LC250 Platform) 2024–2025 All Grades Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All Grades Not Compatible Toyota Land Cruiser 200 (LC200) 2007–2021 All Grades Not Compatible Toyota Land Cruiser Prado 150 (LC150) 2009–2023 All Grades Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔩 Tools Required: None Park the vehicle on a level surface and allow the front grille area to cool to ambient temperature before beginning work. Thoroughly clean the grille surface where the strip will be applied using an isopropyl alcohol (IPA) wipe or equivalent degreaser. Remove all dust, wax, and residue. Allow the cleaned area to dry completely — at least 5 minutes — before proceeding. Dry-fit the decoration strip against the grille to confirm alignment and positioning before committing to adhesion. Peel back the adhesive liner on the strip and carefully align it to the grille, pressing firmly from the centre outward to eliminate air pockets. Apply sustained hand pressure along the full length of the strip for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 24 hours before exposing the vehicle to rain, carwash, or pressure washing to allow the adhesive bond to fully cure. ⚠ Note: Do not attempt installation in temperatures below 10°C / 50°F. Cold temperatures significantly reduce adhesive performance and may result in premature lifting. For best results, install in a warm, dry environment. Elevate Your LC250 Small details make the biggest difference. This grille strip is one of the fastest ways to give your Land Cruiser 250 a sharper, more intentional look — and it takes less than half an hour to fit. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment compatibility identification.

Victorious · Mercedes CLA-Class · Exterior Styling GT R Style Front Grille – Mercedes CLA-Class W117 (2013–2015) Transform your CLA's front-end aesthetic with AMG GT R–inspired performance styling. W117 / C117 2013–2015 ABS Material Direct Fit Silver/Black Finish AMG Inspired Overview The Mercedes-Benz CLA-Class W117 struck a chord when it launched—affordable, sleek, and genuinely dynamic. But if you've been looking for a way to sharpen its presence without a full body kit, this GT R Style Front Grille delivers exactly that. It's the kind of upgrade that makes people look twice. Engineered to replace your factory grille, this piece takes direct inspiration from the AMG GT R supercar, translating that high-performance DNA into a sporty, aggressive front-end expression. The horizontal slat design and bold stance create visual depth and aggression, while the silver and black finish coordinates seamlessly with modern Mercedes styling cues. Manufactured from high-quality ABS plastic, it's lightweight, durable, and designed for straightforward bolt-on installation. Transfer your Mercedes star badge from the original grille and you're finished—no drilling, no permanent modifications, just instant presence upgrade. What's Included 📦 GT R Style Grille Complete replacement unit, ready to install 🔧 Hardware Kit All fasteners and clips included 📋 Installation Guide Step-by-step illustrated instructions Product Highlights AMG GT R–inspired design with aggressive horizontal slat pattern Lightweight ABS construction for durability and ease of handling Silver and black dual-tone finish matches modern Mercedes aesthetics Direct bolt-on replacement—no cutting or modification required Enhances aerodynamic appearance and front-end presence Compatible with all 2013–2015 CLA200, CLA220, CLA260, CLA300 models Preserves original grille opening for cooling efficiency Star badge easily transferred from factory grille Dramatically improves vehicle's visual impact and sportiness Investment-grade styling upgrade at accessible price point Compatibility Model Year Range Fitment Mercedes CLA200 (W117) 2013–2015 Direct Fit Mercedes CLA220 (W117) 2013–2015 Direct Fit Mercedes CLA260 (W117) 2013–2015 Direct Fit Mercedes CLA300 (W117) 2013–2015 Direct Fit Mercedes CLA (2016+) 2016 and later Not Compatible Other Mercedes Models All years Not Compatible Installation Notes Difficulty Level: Beginner | Time: 20–30 minutes Remove any trim or clips securing the factory grille to the bumper fascia. Carefully disconnect the Mercedes star badge from the original grille by gently prying the retaining clips. Lift away the factory grille and set aside. Position the new GT R Style Grille into the opening, ensuring alignment with mounting points. Secure all fasteners and clips provided in the hardware kit, tightening evenly. Reattach the Mercedes star badge to the new grille's central mounting point. Test fitment by opening and closing the bonnet to confirm stability. Clean and inspect for any gaps or misalignment. Note: The Mercedes star badge is not included with this product for trademark compliance. It transfers easily from your original grille using the existing retaining clips—a 30-second operation. If your badge is damaged or missing, replacement badges are widely available through Mercedes dealers or third-party suppliers. Ready to Elevate Your CLA's Presence? This GT R Style Grille is the perfect entry point into performance-inspired exterior styling. It's bold without being ostentatious, practical without compromise, and guaranteed to turn heads at every set of traffic lights. Add to Cart Save 20% on any 2 items with code 22GET20 4.9★ Rated 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist in vehicle styling and performance accessories. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler AG, or any official Mercedes service network. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket customization and is sold as-is for enthusiast use only.

Victorious Automotive · Range Rover Velar · Interior Trim Head Pillow Adjustment Decoration Button Trim for Range Rover Velar 2017–2022 ABS chrome button trim that elevates the headrest adjustment controls on your Range Rover Velar — a small detail that makes an immediate visual difference inside the cabin. Range Rover Velar 2017–2022 ABS Chrome Interior Moulding 5 Colour Options 3M Adhesive Fit ISO9001 Certified LLK780 Overview The Range Rover Velar was designed from the outset to blur the line between sculpture and vehicle — its interior is one of the most refined in the SUV class. For owners who take that philosophy seriously, every surface matters, including the small but frequently touched headrest adjustment buttons. Left in their standard form, these controls can look surprisingly plain against the Velar's otherwise considered cabin design. This ABS chrome decoration trim for the head pillow adjustment buttons addresses exactly that. Precision-formed to sit flush over the factory controls, it introduces a polished or colour-matched accent at one of the most visible points in the rear seat area. Available in five finishes — Silver, Gold, Red, Black, and Blue — there's an option to complement either a factory interior palette or a more personalised build. Certified to ISO9001 manufacturing standards and backed by the metyoucar LLK780 model specification, this trim is built to the kind of tolerances that won't look out of place in a premium British SUV. If you're refining the Velar's interior one considered piece at a time, this is exactly the level of detail worth attending to. What's Included 🪄 Chrome Button Trim Set ABS chrome headrest adjustment button covers 🔲 3M Adhesive Backing Pre-applied for clean, tool-free installation 📋 Installation Guide Basic fitting reference included Product Highlights Precision-moulded ABS chrome construction for a factory-quality finish Available in 5 finishes: Silver, Gold, Red, Black, and Blue Pre-applied 3M adhesive — no drilling, no tools required Designed specifically for the Range Rover Velar headrest adjustment buttons ISO9001 certified manufacturing for consistent quality control Lightweight at just 12g — no impact on headrest function or movement Direct fit over OEM controls with no modification needed Chrome finish resists fingerprints and light surface wear Subtle upgrade with a high visual impact in the cabin Colour options suit both standard and custom interior specifications Compatibility Vehicle Year Range Fitment Range Rover Velar 2017–2022 Direct Fit Land Rover Discovery Sport 2015–2017 Direct Fit Range Rover Sport L494 2013–2020 Verify Before Ordering Range Rover Vogue L405 2013–2020 Verify Before Ordering Land Rover Discovery 5 2017–2022 Verify Before Ordering Range Rover Velar (2023+) 2023–Present Not Compatible If your vehicle is not listed or you're unsure, please contact us at +44 203 943 9919 before ordering. Our team is available Monday to Friday, 9am–7pm. Installation Notes Difficulty: Very Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Clean the headrest adjustment button surface thoroughly using an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond. Identify the correct trim piece for each button position (refer to any included guide or test-fit without removing the adhesive backing first). Peel back the 3M adhesive protective layer from the rear of the trim piece. Align the trim carefully over the headrest button and press firmly into position for 20–30 seconds to activate the adhesive bond. Allow 24 hours before applying any significant pressure or cleaning around the fitted area to ensure full cure. ⚠ Note: Do not install on damp, greasy, or cold surfaces. In cooler climates, allow the trim and adhesive to reach room temperature before fitting. Attempting to reposition after initial adhesion may reduce bond strength. Browse More for Your Vehicle 🚙 Range Rover Velar Shop the full Velar collection → 🚙 Discovery Sport Shop Discovery Sport accessories → 🚙 Land Rover Discovery 5 Shop Discovery 5 accessories → Elevate Every Detail Thousands of Range Rover and Land Rover owners trust Victorious Automotive to help them finish their vehicles to the standard these machines deserve. Rated 4.9/5 from over 12,300 verified reviews. Shop All Velar Accessories Use code 22GET20 — save 20% when you buy any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Carbon Style Headrest Button Covers for Range Rover Vogue L460 2023–2024 A precision-formed ABS carbon fibre trim upgrade that brings a sharper, more purposeful look to the rear headrest controls of your L460 Vogue — no tools, no compromise. Range Rover Vogue L460 2023–2024 Carbon Fibre Style ABS Construction Peel & Stick Fit Interior Trim Headrest Cover No Drilling Overview The fifth-generation Range Rover Vogue L460 sets a new benchmark for interior refinement. Its cabin — whether finished in Ebony, Almond, or Ivory — is defined by clean surfaces, restrained detailing, and a commitment to tactile quality. For owners who want to personalise that environment without disturbing its architectural calm, the details matter enormously. These headrest button covers are purpose-designed for the L460 Vogue, targeting the small but visible control buttons integrated into the rear headrests. The carbon fibre-style finish introduces a subtle sporting character — adding visual depth and texture to an area that in standard form is often overlooked. Made from high-grade ABS, the covers are formed to match the exact contours of the L460's headrest housing, sitting flush and secure without any proud edges or awkward fitment. The installation process is entirely adhesive-based, meaning there is no need to remove panels, source additional hardware, or risk damage to the surrounding trim. For owners building out a cohesive interior upgrade — alongside steering wheel trims, air vent surrounds, or dashboard finishers — this is a natural and affordable starting point that punches well above its price. What's Included 🪄 Headrest Button Cover Set Full set of carbon style ABS covers for L460 headrest buttons 📦 Retail Packaging Delivered new, boxed, and ready to install 🔧 Pre-Applied Adhesive 3M-grade peel-and-stick backing included on each piece Product Highlights Precision-designed for the Range Rover Vogue L460 2023 and 2024 model years Carbon fibre-style finish adds visual texture and a sporting accent to the rear cabin High-grade ABS construction — lightweight, durable, and resistant to warping Flush fitment profile sits cleanly against the original headrest housing Pre-applied peel-and-stick adhesive for a clean, tool-free installation Does not obstruct or interfere with headrest button functionality Resistant to UV fading and discolouration over time Pairs well with other L460 carbon-style interior trim upgrades Supplied brand new in retail box — 100% unused condition Easy to remove and reposition before adhesive is fully cured Compatibility Model Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L460 2022 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle parked and the rear cabin at a comfortable working temperature — avoid installation in very cold conditions as adhesive performance may be reduced. Using a clean microfibre cloth and an isopropyl alcohol wipe, thoroughly clean the surface of each headrest button area to remove any dust, oils, or residue. Allow to dry fully before proceeding. Dry-fit each cover onto its corresponding headrest button without removing the adhesive backing, confirming alignment and flush contact across the full surface. Once satisfied with the positioning, peel back the adhesive liner from one cover and carefully press it into place, applying firm and even pressure for 30–60 seconds to ensure a strong bond. Repeat for all remaining covers, working one at a time to maintain accuracy and avoid misalignment. Allow the adhesive to cure for a minimum of 24 hours before wiping or placing any pressure on the covers. ⚠ Note: Do not use cleaning sprays, leather conditioners, or interior detailing products directly on the covers for the first 48 hours after installation. If repositioning is needed, act within the first few minutes before the adhesive fully bonds. Avoid peeling forcefully once cured to prevent damage to the underlying headrest surface. Elevate Every Detail of Your L460 The Range Rover Vogue L460 deserves an interior that reflects your standards at every level. Explore our full collection of L460 Vogue interior upgrades and build the cabin you envisioned. Shop Range Rover L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of compatibility identification.

Victorious Automotive · Land Rover Discovery · Headlamp Protection Headlamp Tint Pre-Cut Film – Land Rover Discovery Sport, Range Rover Evoque, Velar & Range Rover (2013–Present) Precision pre-cut TPU headlamp tint film engineered for Land Rover and Range Rover models — delivering invisible protection and a refined blackened or clear finish with zero compromise to your lighting output. Discovery Sport 2016+ Range Rover Evoque Range Rover Velar Range Rover L405 Range Rover Sport L494 Top-Grade TPU Self-Healing Scratch Resistant Blackened & Clear Options Pre-Cut Fit 2 Piece Kit Overview The Land Rover Discovery Sport and its Range Rover siblings are vehicles built around presence and precision. Their swept, jewel-cluster headlamp designs are among their most striking visual features — and they're also among the first components to show the wear of daily driving. Stone chips, fine surface scratches, and UV haze can quickly diminish the clarity and impact of those lenses, affecting both aesthetics and resale value. This headlamp tint film is pre-cut using factory-accurate templates for each specific model and year range, meaning there's no trimming required and no risk of misalignment. Manufactured from premium self-healing TPU — the same class of material used in professional paint protection film — it bonds cleanly to the lens surface and absorbs minor abrasions over time, recovering its smooth finish without any intervention. Available in two finishes: a crystal-clear transparent option that protects without altering the look of your headlamps, and a blackened tint variant that adds a more aggressive, smoked aesthetic. Either way, your lenses stay sharp, your lighting remains fully operational, and the upgrade takes less than 30 minutes to apply at home. What's Included 💡 Pre-Cut Headlamp Film × 2 One piece per headlamp, precision cut to vehicle-specific templates 🧰 Application Tool Kit Squeegee and fitting tools included as complimentary gift 📋 Fitting Guide Step-by-step application instructions for a clean, bubble-free finish 🎨 Choice of Finish Blackened smoke tint or crystal-clear transparent — select at checkout Product Highlights Premium self-healing TPU material — minor scratches recover automatically over time Factory-accurate pre-cut templates — no trimming, no guesswork, no waste Available in blackened smoked tint or clear transparent finish Scratch, dust, and debris resistant surface coating UV-stable film — resists yellowing and hazing in prolonged sun exposure Does not interfere with headlamp output, DRL function, or beam pattern Pressure-sensitive adhesive — clean, residue-free removal when needed Full lens coverage including DRL sections and indicator zones Designed for DIY fitment — no professional tools or heat gun required Protects resale value by keeping lenses in original, unmarked condition Vehicle Compatibility Vehicle Year Range Fitment Land Rover Discovery Sport 2016 – Present Direct Fit Range Rover Evoque (L538) 2015 – 2019 Direct Fit Range Rover Evoque (L551) 2020 – Present Direct Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Vogue (L405) 2013 – 2017 Direct Fit Range Rover Sport (L494) 2014 – 2017 Direct Fit Range Rover Vogue (L405 Facelift) 2018 – Present Direct Fit Range Rover Sport (L494 Facelift) 2018 – Present Direct Fit Range Rover Sport L461 2022 – Present Not Compatible Range Rover Vogue L460 2022 – Present Not Compatible Land Rover Defender L663 2020 – Present Not Compatible Not sure which year or variant you have? Call us on +44 203 943 9919 and our team will confirm compatibility before you order. Installation Notes 🔧 DIY Friendly — Approx. 20–30 Minutes · No Tools Required Beyond Kit Supplied Thoroughly clean each headlamp lens with an isopropyl alcohol wipe and allow to dry completely. Any residue or moisture will affect adhesion. Identify the correct piece for each side — the pre-cut shapes are mirror images of one another. Do not attempt to fit them interchangeably. Lightly mist the headlamp surface with a solution of water and a small drop of washing-up liquid. This allows repositioning during placement. Peel back a small portion of the film backing and align the leading edge with the inner edge of the headlamp housing. Gradually peel and lay the film across the lens, using the squeegee to press outward from the centre — working out any bubbles as you go. Once fully applied, use the squeegee firmly across the entire surface to expel any remaining moisture and ensure full adhesion at the edges. Allow 24–48 hours for the adhesive to cure fully before washing the vehicle or driving in heavy rain. ⚠ Important: Do not apply in direct sunlight or temperatures below 10°C — the adhesive requires a moderate ambient temperature to bond correctly. If any lift occurs at the edges within the first 48 hours, re-press firmly with a clean cloth before the adhesive fully sets. Protect the Details That Define the Vehicle Headlamp clarity is one of the first things a trained eye notices on a used Land Rover or Range Rover. This pre-cut TPU film takes under 30 minutes to fit and keeps your lenses in showroom condition for years to come. Shop the full Discovery Sport and Range Rover accessory collections at Victorious. Shop Discovery Sport Accessories Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Evoque L538 · Headlamp Protection Headlamp Tint Pre-Cut Film – Range Rover Evoque 2015–2019 (L538) Precision pre-cut TPU headlamp tint film that shields your Evoque's headlights from stone chips, UV damage, and road debris — available in Blackened or Transparent finish. Range Rover Evoque L538 2015–2019 Top-Grade TPU Self-Healing Scratch Resistant Pre-Cut Fit Blackened & Transparent No-Drill Install Overview The Range Rover Evoque L538 (2015–2019) is a design-led compact SUV that commands attention on both urban streets and open roads. Its slim, swept headlamp clusters are one of its most defining aesthetic details — and one of the first elements to show the cosmetic toll of daily driving. Stone chips, road grit, and UV exposure gradually dull and pit the lens surface, detracting from the Evoque's polished presence. These precision pre-cut headlamp tint films are laser-profiled to follow every contour of the Evoque's headlamp housings exactly — no trimming, no guesswork, and no risk of misaligned edges. Made from top-grade thermoplastic polyurethane (TPU), the film is genuinely self-healing at a molecular level; light surface scratches disappear under warmth, keeping the lens looking factory-fresh for years. Choose Transparent to retain the original headlamp colour and simply add an invisible armour, or opt for Blackened to give your Evoque a sharper, more sinister look without permanently modifying any component. Unlike cheap vinyl alternatives, this TPU film resists yellowing, resists peeling at the edges, and maintains optical clarity so your light output is never compromised. Installation requires no professional tools and leaves no permanent residue — meaning it's fully reversible whenever you choose. It's one of the most impactful yet understated upgrades available for the Evoque L538. What's Included 💡 2× Pre-Cut Headlamp Films Left and right, profiled for Evoque L538 2015–2019 🧰 Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step application instructions 🎨 Choice of Finish Blackened smoke or crystal transparent Product Highlights Precision pre-cut profile for exact fit on Evoque L538 headlamps Top-grade TPU construction — flexible, durable, optically clear Self-healing surface technology repairs light scratches with heat Available in Blackened smoke or Transparent protective finish Protects against stone chips, road debris, dust, and UV rays Fully reversible — removes cleanly with no adhesive residue No trimming required — direct application straight from the pack Does not reduce headlamp light output or beam quality Resistant to yellowing, peeling, and edge lifting over time DIY-friendly installation — no professional fitting required Compatibility Vehicle Year Range Fitment Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Separate SKU Range Rover Velar 2017–2020 Separate SKU Range Rover Vogue L405 2013–2017 Separate SKU Range Rover Vogue L405 2018–Present Separate SKU Range Rover Sport L494 2014–2017 Separate SKU Range Rover Sport L494 2018–Present Separate SKU Land Rover Discovery Sport 2016–Present Separate SKU This listing is pre-cut specifically for the Range Rover Evoque L538 (2015–2019). If your vehicle is listed above with a 'Separate SKU' badge, please browse our full Range Rover Evoque collection or Discovery Sport collection to find the correct fitment. Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Tools Required Thoroughly clean the headlamp lens surface with an alcohol-based solution and allow to dry completely. Remove any wax, polish, or silicone residue for best adhesion. Working in a warm, dust-free environment, carefully peel the backing layer from the TPU film — handle by the edges to avoid fingerprint contamination on the adhesive side. Using the included spray solution (or a light mist of soapy water), lightly dampen the headlamp surface to allow the film to be repositioned during application. Align the pre-cut film to the headlamp — the precision cut profile should follow the lens edge exactly. Work from the centre outward. Use the included squeegee to push out any air bubbles and water pockets, working from the centre toward the outer edges in firm, smooth strokes. Use a heat gun or hairdryer on low heat to gently warm the film over curved edges, encouraging the TPU to conform and bond fully. Allow 24–48 hours for the adhesive to cure fully before washing the vehicle or exposing to heavy rain. ⚠ Note: Do not apply in cold temperatures (below 10°C / 50°F) as this reduces film flexibility and may cause lifting at edges. Ensure the headlamp surface is completely dry before beginning. Do not use abrasive cloths during cleaning. Complete Your Evoque's Look Explore the full range of accessories curated specifically for the Range Rover Evoque L538 — from exterior protection to interior upgrades — all hand-selected by Land Rover enthusiasts. Shop Range Rover Evoque L538 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names and codes are referenced solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Headlamp Protection Headlamp Tint Pre-Cut Film for Range Rover Evoque 2020+ (L551) Pre-cut TPU headlamp tint film engineered to the exact lens profile of the 2020+ Range Rover Evoque — delivering smoked or clear protection that installs cleanly, self-heals from minor abrasions, and keeps your headlights looking factory-fresh. Range Rover Evoque L551 2020 – Present Top-Grade TPU Self-Healing Scratch Resistant Blackened & Transparent Pre-Cut Fit Set of 2 Overview The 2020-onwards Range Rover Evoque L551 represents a genuinely refined evolution of Land Rover's most urban, design-led SUV. With its flush Matrix LED headlights and sculpted front end, the Evoque commands attention — but those exposed polycarbonate lenses are vulnerable to stone chips, road debris, UV yellowing, and the kind of fine-surface scratching that accumulates over daily use and progressively dulls that sharp, purposeful look. This pre-cut headlamp tint film is manufactured from high-grade TPU (Thermoplastic Polyurethane) — the same class of material used in professional paint protection film. The film arrives precisely shaped to match the exact headlamp outline of the L551 Evoque, meaning no trimming, no guesswork, and a clean installation that sits edge-to-edge without visible overhang. Available in both a dark smoked blackened finish for an aggressive, contemporary aesthetic, or a clear transparent version for those who simply want invisible protection. The self-healing surface technology means light swirl marks and minor surface abrasions disappear with exposure to heat — keeping the film looking as good as the day it was applied. If you care about the long-term condition of your Evoque, this is one of the simplest and most cost-effective protective upgrades you can make. What's Included 💡 Pre-Cut Headlamp Film 2 pieces — driver & passenger side, L551 profile 🧰 Application Tools Kit Included as complimentary gift with every set 🎨 Choice of Finish Blackened smoked or transparent clear 📋 Installation Guide Step-by-step guidance for a clean, bubble-free fit Product Highlights Pre-cut to exact L551 Evoque headlamp dimensions — no trimming required Top-grade TPU material with genuine self-healing surface technology Available in blackened smoked finish for a stealth aesthetic Available in transparent clear for invisible, unobtrusive protection Scratch and abrasion resistant against stone chips and road debris UV resistant — prevents lens yellowing and surface degradation over time Conforms to the lens contour for a smooth, bubble-free application Does not impair headlamp light output or beam pattern Removable without adhesive residue — non-destructive to original lens 100% brand new — each set packaged and quality-checked before dispatch Compatibility Vehicle Years Fitment Range Rover Evoque L551 2020 – Present Direct Fit Range Rover Evoque L538 2015 – 2019 Direct Fit Land Rover Discovery Sport 2016 – Present Direct Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Vogue L405 2013 – 2017 Direct Fit Range Rover Vogue L405 2018 – Present Direct Fit Range Rover Sport L494 2014 – 2017 Direct Fit Range Rover Sport L494 2018 – Present Direct Fit Range Rover Sport L461 2022 – Present Check Variant Defender L663 2020 – Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools: Included Thoroughly clean both headlamp lenses with a mild soapy solution and allow to dry completely. Remove any wax, grease, or contaminants from the lens surface for maximum adhesion. Lightly mist the lens surface with a water and soap solution. This allows you to reposition the film during application before the adhesive fully sets. Carefully peel the backing from the pre-cut film and align it to the headlamp lens, starting from one edge and working progressively across the surface. Use the included squeegee tool to smooth the film outward from the centre, pushing out any air pockets or moisture as you go. Use a heat gun or hairdryer on a low setting to gently warm the edges of the film, encouraging it to conform tightly to any curved or contoured areas of the lens. Allow 24–48 hours for the film to fully cure and bond before washing the vehicle or exposing it to heavy rain. Note: Ensure the vehicle is parked in a clean, dust-free environment during installation. Avoid applying in direct sunlight or extreme cold, as both conditions will reduce working time and adhesion quality. The self-healing function activates with heat — minor surface marks will naturally diminish in warm conditions or with brief exposure to warm water. Shop the Full Range Rover Evoque Collection Browse our complete range of precision-fitted accessories for the Range Rover Evoque L551 — from exterior protection to interior upgrades, all selected and quality-checked by our team of Land Rover specialists. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Headlamp Protection Headlamp Tint Pre-Cut Film — Range Rover Velar 2017–2020 Precision pre-cut TPU headlamp protection film that shields your Velar's signature LED clusters from stone chips, road debris, and UV degradation — in Blackened or Transparent finish. Range Rover Velar 2017–2020 Top-Grade TPU Self-Healing Pre-Cut Blackened & Transparent Scratch Resistant 2-Piece Kit Overview The Range Rover Velar occupies a unique space in the Land Rover lineup — its flush surfaces, distinctive blade-style LED daytime running lights and sculpted headlamp housings are a defining part of its identity. Keeping those clusters looking pristine is non-negotiable for any Velar owner who takes their vehicle seriously. This pre-cut headlamp tint film is engineered specifically for the 2017–2020 Range Rover Velar, meaning there is no trimming, no guesswork and no wasted material. Made from top-grade TPU (Thermoplastic Polyurethane), the film delivers genuine self-healing properties — minor swirl marks and light surface scratches disappear with the warmth of sunlight or warm water, keeping the finish looking factory-fresh. Available in Transparent (near-invisible protection) and Blackened (a smoked stealth aesthetic), both options preserve full light output while adding a layer of durable defence against stone chips, insects, road grime and UV fading. TPU film at this grade outperforms traditional PVC or vinyl alternatives in longevity, clarity retention and edge-seal durability — qualities that matter on a vehicle designed to be driven hard and admired standing still. Each kit includes application tools, making this a satisfying home installation for any detail-minded owner. What's Included 💡 Pre-Cut Headlamp Film × 2 One piece per headlamp, cut to Velar profile 🛠️ Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step fitting reference 🎨 Choice of Finish Blackened smoked or crystal transparent Product Highlights Precision pre-cut to fit Range Rover Velar 2017–2020 headlamp housings Top-grade TPU material with genuine self-healing surface technology Available in Blackened smoked and Transparent clear finishes Protects against stone chips, road debris and insect damage UV-resistant formulation prevents yellowing and haze over time Scratch-resistant outer layer maintains optical clarity No cutting or trimming required — dry-fit ready out of the pack Preserves full LED light output in both finish options Residue-free removal without damage to headlamp housing Application tools included for a clean, professional finish Compatibility Model Year Range Fitment Range Rover Velar 2017–2020 Direct Fit Range Rover Evoque (L538) 2015–2019 Direct Fit Range Rover Evoque (L551) 2020–Present Direct Fit Discovery Sport (L550) 2016–Present Direct Fit Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Vogue (L405) 2018–Present Direct Fit Range Rover Sport (L494) 2014–2017 Direct Fit Range Rover Sport (L494) 2018–Present Direct Fit Range Rover Sport L461 (2022+) 2022–Present Verify Before Purchase Range Rover Vogue L460 (2022+) 2022–Present Verify Before Purchase Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Included in kit Thoroughly clean both headlamp housings with an isopropyl alcohol wipe to remove all dust, wax, grease and residue. Any contamination beneath the film will cause lifting. Work in a warm, dust-free environment — an indoor garage is ideal. Cold temperatures reduce film flexibility and adhesion quality. Lightly mist the headlamp surface with a slip solution (a few drops of baby shampoo in water works well) to allow repositioning during initial placement. Carefully peel the film from its backing and align it to the headlamp housing, starting from the centre and working outward. Use the included squeegee to push out air bubbles and excess slip solution from the centre towards the edges using firm, overlapping strokes. Carefully tuck and smooth all edges, ensuring full contact around curves and contours of the Velar headlamp profile. Allow the film to cure undisturbed for 24–48 hours before washing the vehicle or exposing the surface to standing water. Note: Ensure the film selected matches your exact model year. Headlamp housings changed between Velar facelifts — if you are unsure of your build date or specification, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Protect What Makes the Velar Distinctive Stone chips and road debris don't care about resale value. This precision-cut TPU film is the simplest, most effective way to keep your Velar's headlamps looking flawless — whether you choose stealth black or crystal clear. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Exterior Protection Headlamp Tint Pre-Cut Film – Range Rover Velar 2018–2020 Precision pre-cut TPU headlamp tint film engineered to protect and transform the front lighting signature of your Range Rover Velar — available in Blackened Smoke or Crystal Clear. Range Rover Velar 2018–2020 Top TPU Material Self-Healing Scratch Resistant Blackened & Clear Pre-Cut Fit 2-Piece Kit Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — its flush LED headlamps and sleek frontal architecture are central to its visual identity. Keeping those headlamp lenses in pristine condition against stone chips, road debris, UV degradation and daily wear is something every Velar owner should prioritise from day one. This pre-cut headlamp tint film is manufactured from premium Top TPU — the same grade of thermoplastic polyurethane used in professional paint protection applications. Unlike adhesive vinyl films, TPU is optically clear at a molecular level, meaning light output is never compromised. The self-healing surface actively closes minor swirl marks and surface abrasions when exposed to heat, keeping the film looking factory-fresh for years. Available in two finishes — Blackened Smoke for a blacked-out, stealth aesthetic that complements the Velar's already dramatic lines, and Crystal Clear for invisible protection that maintains the OEM look — both options are precision pre-cut to the exact headlamp contours of the 2018–2020 Range Rover Velar, ensuring a seamless, bubble-free install with no trimming required. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels for the Velar headlamps 🛠️ Application Tool Kit Included as a gift to assist with installation 📋 Installation Guide Step-by-step instructions for a clean finish 🎨 Choice of Finish Blackened Smoke or Crystal Clear — select at checkout Product Highlights Precision pre-cut for the Range Rover Velar 2018–2020 — no trimming needed Top-grade TPU material — flexible, durable and optically superior Self-healing surface technology — minor scratches disappear with heat Scratch and abrasion resistant — protects against stone chips and road debris UV-stabilised formula — prevents lens yellowing and hazing over time Available in Blackened Smoke for a stealth look or Crystal Clear for OEM finish Maintains full headlamp light output — zero optical interference Bubble-free adhesive backing — clean, professional finish every time Residue-free removal — will not damage or stain OEM headlamp lenses Includes application tools — everything you need in one package Vehicle Compatibility Vehicle Year Range Fitment Range Rover Velar 2018–2020 Direct Fit Range Rover Velar 2017 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–Present Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2018–Present Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L461 2022–Present Verify Before Purchase Range Rover Vogue L460 2022–Present Verify Before Purchase Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Tools Required Thoroughly clean the headlamp lens surface with an isopropyl alcohol solution and allow to dry completely — any dust or grease will affect adhesion. Work in a warm, dust-free environment. A garage or sheltered area at 15–25°C is ideal. Warmer conditions improve film flexibility and conformity. Lightly mist the headlamp surface with a water and soap solution (wet application method) to allow repositioning during placement. Carefully peel the backing from the pre-cut TPU film, keeping the adhesive side away from surfaces. Align the film to the headlamp contour before committing. Apply the film from the centre outward using the included squeegee tool, working any air bubbles towards the edges progressively. Use a heat gun or hairdryer on a low setting to gently warm the film around curves and edges — this improves adhesion and conformity to complex shapes. Allow 24–48 hours for the adhesive to fully cure before washing the vehicle or exposing the film to heavy rain. ⚠ Note: Ensure the headlamp surface is completely free of wax, polish or ceramic coating residue before application. Residual coatings will significantly reduce adhesive bond strength and may cause lifting at the edges. If your lenses have been previously coated, lightly decontaminate with a clay bar or isopropyl wipe before fitting. Complete Your Velar Build Explore the full Victorious range of Range Rover Velar accessories — from interior refinements to exterior protection — curated exclusively for owners who refuse to compromise. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Styling Headlight Below Decorative Strip — Toyota Land Cruiser 250 LC250 (2024–2025) A precision-formed stainless steel accent strip that frames the lower headlight aperture of the LC250, sharpening the front fascia with a subtle, factory-coherent finish. LC250 Land Cruiser 250 2024–2025 Prado FJ250 1958 First Edition Stainless Steel Silver Finish Paste Install Exterior Trim Overview The Toyota Land Cruiser 250 represents a significant generational step for the nameplate — bolder proportions, a more upright front face, and a design language that demands accessories built to the same standard. Every line on the LC250's fascia is deliberate, and the lower headlight zone is one of the most visible elements at eye level. Left bare, it can read as unfinished. Addressed correctly, it becomes a defining detail. This headlight below decorative strip is engineered exclusively for the 2024–2025 Land Cruiser 250 — covering all variants including the Prado, FJ250, and the limited 1958 First Edition. Formed from premium stainless steel with a polished silver finish, the strip sits flush beneath the headlight cluster, adding visual weight and a refined chrome-adjacent accent without looking afterthought or overdressed. The adhesive paste installation method means no drilling, no cutting, and no risk to the original bodywork. It bonds cleanly to the factory surface and sits with the precision of a factory-fitted trim — because the fit tolerance was developed specifically for this generation of Land Cruiser. If you care about the details of your LC250, this is the kind of modification that rewards that attention. What's Included ✦ Headlight Below Decorative Strip 1 piece · Stainless steel · Silver polished finish 🔧 Installation Adhesive Pre-applied or included paste · No tools required 📄 Installation Instructions Step-by-step fitting guide included in package Product Highlights Engineered exclusively for the 2024–2025 Toyota Land Cruiser 250 platform Compatible with all LC250 trim grades including Prado, FJ250 and 1958 First Edition Premium stainless steel construction — resistant to rust, UV, and temperature fluctuation Polished silver finish that complements the factory chrome and dark trim accents Precision-formed contours for a flush, factory-coherent fit against the headlight aperture No-drill adhesive paste installation — fully reversible with no damage to original paint Enhances the front fascia's visual definition and perceived quality at street level Lightweight stainless construction adds no meaningful mass to the vehicle Designed to retain visual integrity across all weather conditions and wash cycles Manufactured to exacting tolerances — no gaps, no flex, no rattling once fitted Compatibility Vehicle Year Variant / Grade Fit Toyota Land Cruiser 250 (LC250) 2024 All grades Direct Fit Toyota Land Cruiser 250 (LC250) 2025 All grades Direct Fit Toyota Land Cruiser Prado (LC250-based) 2024–2025 Prado variants Direct Fit Toyota FJ250 2024–2025 FJ250 Direct Fit Toyota Land Cruiser 1958 First Edition 2024–2025 1958 First Edition Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All grades Not Compatible Toyota Land Cruiser 200 (LC200) Pre-2022 All grades Not Compatible Toyota Land Cruiser 70 Series Any All grades Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  |  🔧 Difficulty: Beginner Thoroughly clean the lower headlight surround area with an isopropyl alcohol wipe, removing all wax, grease, and road film. Allow to dry completely before proceeding. Dry-fit the decorative strip against the headlight aperture to confirm alignment and familiarise yourself with the correct positioning before adhesive is applied. Peel the backing from the adhesive tape or apply the included paste evenly across the rear mounting surface of the strip — avoid the edges to prevent squeeze-out. Position the strip carefully from one end to the other, pressing firmly along the full length for 30–60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the fitment area to sustained water pressure. ⚠ Note: Ensure the vehicle surface temperature is between 10°C and 35°C during installation. Application in direct sunlight or extreme cold may compromise the adhesive bond. Verify your exact variant matches the listed compatible models before fitting. Complete Your LC250's Exterior Browse our full range of Toyota Land Cruiser LC250 exterior accessories — every piece is selected and tested to meet the standards LC250 owners expect. Shop LC250 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced on this page are the property of their respective owners and are used for fitment identification purposes only. Product images are representative — minor variations in finish may occur between production batches.

Automotive · Tesla · Interior Organizers Headrest Hook Hanger Holder for Tesla Model 3 & Model X Premium aluminum headrest hooks engineered for seamless Tesla interior organization and cargo accessibility. Model 3 Model X 2017–2026 Aluminum Tool-Free Install Overview Tesla Model 3 and Model X owners understand the importance of maximizing interior space and maintaining a clean, organized cabin. Whether you're managing shopping bags, jackets, or daily essentials, your vehicle's headrest area remains one of the most underutilized storage opportunities. These precision-engineered aluminum headrest hooks deliver a robust yet elegant solution for hanging items securely without compromising your Tesla's premium aesthetic. Constructed from aircraft-grade aluminum with a refined black finish, they integrate seamlessly into both the Model 3's minimalist interior and the Model X's spacious cabin layout. Installation requires no tools or modifications—simply position and secure. The hooks support moderate loads while maintaining structural integrity, making them ideal for work clothes, shopping bags, or keeping backseat items within arm's reach during longer journeys. What's Included 🪝 Dual Headrest Hooks Premium aluminum, black finish ⚡ Tool-Free Installation No drilling or fasteners required ✓ Fitment Verified Tested for Model 3 & Model X Product Highlights Aircraft-grade aluminum construction resists corrosion and wear Precision-engineered for exact Tesla headrest compatibility Sleek black anodized finish complements modern interiors Tool-free installation—no modifications to vehicle required Supports moderate cargo loads securely Compact, unobtrusive design maintains cabin aesthetics Reversible mounting suitable for driver and passenger seats Durable finish resists fingerprints and weathering Quick removal if needed for deep cleaning Tested for durability across multiple drive cycles Compatibility Vehicle Model Year Range Fitment Tesla Model 3 (Standard, Long Range, Performance) 2017–2026 Direct Fit Tesla Model X (Standard, Long Range, Plaid) 2017–2026 Direct Fit Tesla Model S All Years Not Compatible Tesla Model Y All Years Not Compatible Installation Installation Difficulty: Easy | Time Required: 5 minutes Locate the headrest mounting points on the front seat backs (driver and passenger) Align hook bracket with existing headrest attachment points Press firmly until hook is fully seated and secured Gently tug to confirm stability before loading cargo Repeat for second headrest hook if installing both Weight Capacity: Each hook is rated for moderate loads (approximately 5–8 lbs). Avoid exceeding recommended weight to preserve headrest integrity and prevent damage to mounting points. Elevate Your Tesla's Interior Organization Transform underutilized headrest space into functional storage with premium aluminum hooks engineered for Tesla Model 3 and Model X owners who demand both form and function. Shop Headrest Hooks Apply code 22GET20 for 20% off any 2 items 4.9/5 stars – 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 – Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Tesla, Inc. or its subsidiaries. Tesla and Model 3/X are registered trademarks of Tesla, Inc. Product specifications and compatibility are verified independently and subject to change without notice. Always verify fitment with your specific vehicle before purchase.

Victorious · Land Cruiser LC300 · Interior Comfort Headrest Upgrade Comfortable Neck Pillow for Toyota Land Cruiser 300 LC300 Premium neck support engineered to reduce fatigue and enhance comfort on every journey in your LC300. LC300 2021–2024 Memory Foam Beige Direct Fit Easy Install Overview The Toyota Land Cruiser 300 (LC300) is engineered for expedition-grade durability and long-distance capability. On multi-hour drives across varied terrain, driver and passenger comfort becomes critical to reducing fatigue and maintaining focus. This headrest upgrade delivers premium neck and shoulder support through carefully contoured memory foam and a precision-fit design that integrates seamlessly with your LC300's factory interior. Whether navigating highway stretches or backcountry routes, the pillow reduces pressure points and improves spinal alignment during extended driving sessions. Engineered specifically for 2021–2024 LC300 models, this accessory installs without modification and removes just as easily, giving you the flexibility to upgrade comfort without compromise. What's Included 🛴 Neck Pillow Memory foam, beige upholstery Product Highlights Custom contoured design for LC300 headrest mounting Premium memory foam core with slow-rebound technology Beige microsuede upholstery matches factory trim Reduces neck strain during extended driving Improves lumbar and cervical spine alignment No drilling, cutting, or permanent modifications required Removable and repositionable for passenger or driver Temperature-adaptive foam responds to body heat Hypoallergenic materials safe for all users Compatible with all interior configurations (2021–2024) Compatibility Vehicle Model Year Range Fit Toyota Land Cruiser 300 (LC300) 2021, 2022, 2023, 2024 Direct Fit Toyota Land Cruiser LC250 2024+ Not Compatible Toyota Land Cruiser LC200 2007–2020 Not Compatible Installation Notes Difficulty: Beginner | Time: 2–3 minutes Inspect your LC300 headrest for fit and positioning. Position the neck pillow against the headrest back, ensuring even contact. Adjust height and angle to your comfort preference. Secure using factory-compatible mounting points (no adhesive required). Test stability during gentle head movement before driving. Remove anytime by reversing the process. Note: Ensure the pillow does not obstruct your view or interfere with headrest reclining mechanisms. Confirm all mounting points are secure before extended driving. Why Victorious We partner exclusively with Toyota and Land Cruiser owners who demand precision-engineered interior upgrades that preserve factory aesthetics while delivering measurable comfort gains. This pillow has been field-tested across thousands of LC300 owners worldwide and maintains our 4.9-star standard. Ready to Upgrade Your LC300? Add premium comfort to every drive with this precision-fit headrest pillow. Backed by our 30-day money-back guarantee and worldwide shipping. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back ✓ 4.9★ Rated ✓ Worldwide Shipping ✓ Expert Support Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent accessory specialist and is not affiliated with Toyota Motor Corporation, Land Rover, Jaguar Land Rover, or any official manufacturer. All trademarks and vehicle names are property of their respective owners. Product compatibility is based on standard factory specifications; individual fitment may vary. Always verify fit with your specific vehicle configuration before purchase.

Victorious Automotive · Land Rover Discovery 4 · Exterior Heated Rearview Mirror Glass Lenses for Land Rover Discovery 4 LR4 (2010–2013) Direct-fit heated mirror glass lenses that eliminate condensation and frost, restoring clear all-weather visibility to your Discovery 4 LR4. Discovery 4 LR4 2010–2013 Heated Glass Frost-Free Direct Fit ABS Construction Exterior Upgrade Sold Individually Overview The Land Rover Discovery 4 LR4 is a capable and composed machine — equally at home on motorway miles and demanding off-road terrain. But cold mornings, damp conditions, and rapid temperature changes can leave your door mirrors fogged or frost-covered, compromising rear visibility at the exact moment you need it most. That's a compromise no Discovery 4 owner should have to accept. These heated rearview mirror glass lenses are precision-manufactured to fit the Discovery 4 LR4 produced between 2010 and 2013. The integrated heating elements activate alongside your vehicle's existing heated mirror function, rapidly clearing condensation and ice from the mirror surface without any modification to your existing wiring. The result is clear, undistorted visibility in all weather conditions — every time you pull out of the driveway. Built from high-grade ABS plastic with optically correct glass, these lenses are a straightforward like-for-like replacement for worn, cracked, or delaminated originals. Whether you're replacing a damaged mirror or simply upgrading to a more reliable component, this is the clean, sensible solution built for Discovery owners who expect their vehicle to perform in every condition. What's Included 🪞 Heated Mirror Glass Lens 1 × lens with integrated heating element 🔌 Pre-Wired Heating Connector Plug-and-play connection to factory wiring 📦 Protective Packaging Individually packaged for safe transit Product Highlights Integrated heating elements eliminate condensation and frost rapidly in cold weather Optically correct glass provides clear, undistorted rear and side visibility Precision-manufactured for direct OEM-style fitment on Discovery 4 LR4 models Compatible with factory heated mirror switch — no additional wiring required High-grade ABS housing resists impact, UV degradation, and temperature extremes Like-for-like replacement for worn, cracked, or delaminated mirror glass Sold individually — replace one or both mirrors as needed Brand new condition — not a refurbished or reconditioned component Manufactured in an ISO9001 certified facility for consistent quality control Straightforward DIY installation requiring no specialist tools or equipment Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 4 LR4 / L319 2010 – 2013 Direct Fit Land Rover Discovery 4 LR4 / L319 2014 – 2016 Verify Before Purchase Land Rover Discovery 3 LR3 / L319 2004 – 2009 Not Compatible Land Rover Discovery 5 L462 2017 – Present Not Compatible Range Rover Sport L320 2005 – 2013 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: Trim removal tool, clean cloth Ensure the vehicle is parked on a level surface with the ignition off and the mirror heating system deactivated before beginning work. Carefully insert a plastic trim removal tool or flat-blade screwdriver (wrapped in tape) around the edge of the existing mirror glass to release the retaining clips without damaging the mirror housing. Gently pull the old mirror glass forward and away from the housing, taking care not to stress or detach the heating connector at the rear. Disconnect the factory heating connector from the back of the old mirror glass lens — note the orientation before removing. Connect the factory heating connector to the corresponding plug on the new heated mirror glass lens, ensuring a firm and secure connection. Carefully align the new mirror glass with the housing and press firmly until the retaining clips engage and the glass sits flush. Test the heated mirror function using the vehicle's interior controls to confirm correct operation before completing the installation. ⚠ Note: This listing is for one (1) mirror glass lens. If replacing both driver and passenger side mirrors, please order two units. If you are unsure of your exact variant or build date, contact our team at +44 203 943 9919 before ordering. Complete Your Discovery 4 Build Browse our full range of Land Rover Discovery 4 accessories — from exterior upgrades to interior refinements — all curated for LR4 owners who demand quality and precision. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Front Grille Replacement for Range Rover Sport L494 (2014–2017) A bold, precision-formed ABS grille in high gloss black — designed to replace your factory unit and immediately sharpen the front-end presence of your Range Rover Sport. Range Rover Sport L494 2014–2017 High Gloss Black ABS Construction Direct Replacement No Drilling Required OEM-Style Fit Front Grille Overview The Range Rover Sport L494 (2014–2017) is a vehicle that strikes a careful balance between restrained British elegance and commanding road presence. The front grille is one of the most defining visual elements on the Sport — it frames the bonnet line, anchors the headlights, and sets the tone for the entire aesthetic. If your factory grille has become tired, damaged, or simply no longer reflects how you want your Sport to look, replacing it is one of the most impactful single modifications you can make. This High Gloss Black Front Grille has been engineered specifically for the Range Rover Sport L494 facelift and pre-facelift models produced between 2014 and 2017. Constructed from high-quality ABS thermoplastic, it replicates the geometry and mounting points of the original unit to the millimetre — allowing for a clean, rattle-free fitment without any modification to your vehicle's bodywork or wiring. The high gloss black finish adds a darkened, contemporary edge that complements the Sport's inherently athletic character. Whether you're refreshing a worn-out original or simply pursuing a blacked-out front-end aesthetic, this grille delivers a meaningful visual upgrade with a straightforward installation process. It's the kind of detail that separates a cared-for Sport from everything else on the road. What's Included 🔲 High Gloss Black Front Grille 1x full replacement grille unit — pre-assembled and ready to fit 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Engineered exclusively for Range Rover Sport L494 (2014–2017) — no universal-fit compromise High gloss black ABS finish delivers a premium, showroom-quality appearance Direct OEM replacement — uses all factory mounting points and clips No drilling, cutting, or bodywork modification required Durable ABS thermoplastic construction resists impact, UV fade, and road debris Replicates original grille geometry for a seamless, rattle-free fit Suitable for both pre-facelift and mid-cycle Sport variants within the 2014–2017 window Complements blacked-out trim packages and SVR-inspired styling builds Lightweight construction — does not affect aerodynamic balance or air intake flow Tool fitment achievable with standard workshop tools in under an hour Compatibility Vehicle Code Years Trim / Notes Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport L494 2013 First model year — grille surround differs Verify Before Purchase Range Rover Sport L494 2018–2022 Post-facelift — revised grille architecture Not Compatible Range Rover Sport L461 2022–2026 New generation — entirely different platform Not Compatible Range Rover Vogue L405 2013–2021 Different grille design and dimensions Not Compatible Range Rover Velar L560 2018–2022 Closed-face grille — not applicable Not Compatible Installation Notes Difficulty: Beginner · Estimated Time: 30–60 minutes · Tools Required: Trim removal tools, T20 Torx driver Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for improved access to the upper grille mounting points. Using a plastic trim removal tool, carefully prise the existing grille away from the bumper surround, starting from the outer edges and working inward to disengage the retaining clips without cracking the bumper fascia. Locate and remove any Torx screws (typically T20) securing the grille to the upper bumper bracket. Keep all hardware — some clips and screws may be reused during installation of the new unit. Fully remove the original grille and set aside. Clean the mounting recess with a dry cloth to remove any accumulated road grime before fitting the replacement. Align the new High Gloss Black Grille with the factory aperture, ensuring all clip housings are correctly positioned against their corresponding receptacles in the bumper surround. Apply firm, even pressure across the grille face to engage all retaining clips simultaneously. Refit any Torx screws removed in step 3 and torque to hand-tight. Inspect the grille perimeter to confirm uniform gaps and a flush fit against the bumper. Close the bonnet and step back to confirm alignment from distance before driving. ⚠ Important: Always use plastic trim removal tools — metal tools risk permanent scratching of the bumper paint and grille finish. If your vehicle has a front parking sensor cluster integrated into the grille surround, verify sensor positioning and clearance after fitment before driving at speed. When in doubt, consult a qualified automotive technician. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product we stock is chosen with one type of customer in mind — the owner who genuinely cares about their vehicle. If you have any questions about fitment, finish compatibility, or combining this grille with other exterior styling parts for your L494 Sport, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Exterior Styling High Gloss Black Hood Bonnet Vents for Land Rover Defender 90 & 110 (2020–2021, L663) A direct-fit, no-modification upgrade that transforms your Defender's bonnet with an aggressive high gloss black finish — sharper stance, zero compromise. Defender L663 2020–2021 ABS Plastic High Gloss Black Direct Fit No Cutting Required Bonnet Vents Exterior Styling Overview The Land Rover Defender L663 is one of the most visually purposeful vehicles on the road — every line is deliberate, every surface considered. For owners of the 2020 and 2021 model years, the bonnet vents are a focal point of the front-end design, and upgrading them is one of the most impactful exterior changes you can make without touching the bodywork. These high gloss black bonnet vents are precision-engineered as a direct replacement for the factory slats on the Defender 90 and 110. Constructed from durable ABS plastic and finished in a deep, mirror-like gloss black, they slot directly into the existing mounting points — no cutting, no drilling, no wiring. The result is a cleaner, more aggressive look that complements blacked-out trim packages, dark paint finishes, and aftermarket wheel setups with equal effect. At Victorious Automotive, we source only components built to fit without compromise. These vents are designed specifically for the L663 generation — not a generic fit, not a workaround. If you're looking to sharpen your Defender's appearance and have it done in an afternoon, this is one of the most rewarding places to start. What's Included 🪟 Bonnet Vents × 2 Matched pair, left & right fitment 📋 Installation Guide Step-by-step fitting instructions Product Highlights Direct OEM-style replacement — slots into factory mounting points with no modifications High gloss black ABS finish — deep, mirror-like sheen that resists fading and UV degradation Precision-moulded for the L663 Defender — not a universal fit part No cutting, drilling, or splicing required — retains full factory integrity Supplied as a matched pair — left and right vents included Durable ABS plastic construction — lightweight yet impact-resistant Enhances the aggressive stance of the Defender's front-end profile Compatible with both Defender 90 and Defender 110 variants Tool-friendly installation achievable in under 30 minutes Pairs seamlessly with black trim packs, dark wheels, and tinted accessories Compatibility Vehicle Model Code Year Range Fit Land Rover Defender 90 L663 2020–2021 Direct Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Land Rover Defender (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🛠 Tools: Trim removal tool, microfibre cloth Ensure your Defender is parked on a level surface with the bonnet fully open and supported. Allow the engine to cool completely before beginning work. Using a plastic trim removal tool, carefully prise the existing factory bonnet vent slats from their mounting clips. Work from one end to the other to avoid cracking the surrounding trim. Clean the recess area thoroughly with a microfibre cloth to remove any dust, debris, or residue before fitting the new vents. Align the new high gloss black bonnet vent with the factory mounting points, ensuring the orientation matches the original fitment. Apply firm, even pressure along the vent to engage all retaining clips. You should hear an audible click at each point as the vent seats correctly. Repeat the process for the second vent on the opposite side of the bonnet. Once both vents are fitted, close the bonnet gently and inspect the alignment from the front. Adjust if necessary before driving. ⚠ Important: Confirm your exact model year and variant before installation. While this product is designed for 2020–2021 L663 Defenders, minor production changes between build dates may affect fitment. If in doubt, contact our team before fitting on +44 203 943 9919. Complete Your Defender's Exterior Browse our full range of Defender L663 exterior accessories — hand-picked by enthusiasts, tested for fit, and backed by our 30-day money-back guarantee. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, vehicle model names, and codes referenced are used for compatibility identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Side Vents for Range Rover Sport L494 (2013–2020) A bold, factory-finish upgrade that transforms the Sport's front quarter profile with a deep gloss black contrast — no cutting, no drilling, no compromise. Range Rover Sport L494 2013–2020 High Gloss Black ABS Direct OEM Fit Clip-On Installation Exterior Styling Side Vent Covers Pair Included Overview The Range Rover Sport L494 is one of Land Rover's most dynamic and visually assertive models — a vehicle designed to command attention on road and track alike. Its front quarter panel vents are a defining design cue, one of the first elements the eye is drawn to. The stock silver or body-coloured finish works well from the factory, but for owners who want a sharper, more purposeful aesthetic, the contrast of high gloss black is a compelling evolution. These High Gloss Black Side Vent covers are engineered specifically for the Range Rover Sport L494 generation, produced between 2013 and 2020. Manufactured from premium ABS plastic and finished to an automotive-grade high gloss, they overlay your existing side vents with a seamless, factory-looking result. The deep black finish adds a level of visual depth and aggression that complements both standard Sport trims and blacked-out custom builds equally well. Unlike paint-matched or wrapping alternatives, these covers require no bodywork, no adhesives, and no professional fitting. They clip directly onto your existing vents using the original mounting points, giving you a clean, rattle-free result in under an hour. Whether you're building a full stealth spec or simply looking to break up the body colour with a precision detail, these vents deliver a premium finish with none of the complexity. What's Included 🖤 High Gloss Black Side Vents Supplied as a matched pair — driver and passenger side 🔩 OEM-Style Mounting Clips Pre-fitted clips for secure, tool-free attachment 📋 Fitting Guide Step-by-step installation reference included 🛡️ Protective Packaging Foam-lined box to ensure finish is protected in transit Product Highlights High gloss black ABS finish — automotive-grade depth and clarity Manufactured specifically for Range Rover Sport L494 (2013–2020) Supplied as a pair — driver and passenger side included Clip-on fitment using OEM mounting points — no drilling required No adhesives, no heat tools, no professional fitting needed UV-stabilised material — resists fading, cracking and discolouration Precise panel-to-panel flush fit — clean, factory-standard look Complements blacked-out builds, dark packs and stealth specs Reversible — original vents can be reinstated at any time Compatible with all trim levels including SE, HSE, SVR and Autobiography Compatibility Vehicle Generation / Code Years Fitment Range Rover Sport SE L494 2013–2020 Direct Fit Range Rover Sport HSE L494 2013–2020 Direct Fit Range Rover Sport HSE Dynamic L494 2013–2020 Direct Fit Range Rover Sport SVR L494 2015–2020 Direct Fit Range Rover Sport Autobiography L494 2013–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–40 minutes  |  🔧 Tools Required: None Ensure your Range Rover Sport is parked on a level surface and the engine is off. Allow the vehicle to cool if recently driven. Gently clean the existing factory side vent panels with a microfibre cloth to remove any dust, wax or debris that could affect fitment alignment. Carefully flex the original vent panel slightly to locate the OEM clip positions — these are the same anchor points used by the new covers. Align the high gloss black vent cover over the factory vent, ensuring the edges sit flush with the surrounding bodywork before pressing into position. Apply firm, even pressure across the face of the cover until you feel and hear each clip engage securely. Do not force — the fit should be smooth and positive. Repeat the process on the opposite side. Step back and inspect both vents for alignment and panel-flush consistency before driving. ⚠ Note: Avoid installation in temperatures below 5°C — cold ABS can be less flexible and may affect clip engagement. If fitting in cold conditions, allow the covers to acclimatise to room temperature for 30 minutes beforehand. Do not use excessive force at any stage of installation. Upgrade Your Sport. Elevate Every Detail. At Victorious Automotive, every accessory we supply is chosen for owners who demand precision, quality and a finish that reflects the vehicle they drive. These side vents are a small change with a significant visual impact — exactly the kind of detail that sets a well-specced Sport apart from the rest. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or in any way connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners. Product imagery is for illustrative purposes — actual finish may vary slightly depending on screen calibration and ambient lighting conditions.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Exterior Styling High Gloss Black Side Vents for Land Rover Defender 2020+ 110 & 90 – L663 A bold, high-gloss black finish upgrade that sharpens the Defender's signature side vent detail — precision-moulded in ABS for a direct OE-style replacement with zero compromise on fit. Defender L663 2020–2026 110 & 90 High Gloss Black ABS Plastic Direct Fit Pair Included Exterior Upgrade Overview The Land Rover Defender L663 arrived in 2020 as one of the most hotly anticipated vehicles in recent memory — a modern reinterpretation of an icon. Its bold, utilitarian body language is defined by strong lines, deliberate detailing, and those unmistakable side vents positioned prominently on the front wings. For owners looking to sharpen the factory appearance and move away from the standard silver or body-coloured vent finish, a gloss black upgrade is one of the most impactful and cost-effective changes you can make. These High Gloss Black Side Vents have been specifically engineered for the 2020-onward Defender 110 and 90 (L663 platform). Moulded from high-quality ABS plastic, they replicate the exact geometry of the original vent assemblies, allowing for a clean, rattle-free installation with no modifications to the vehicle required. The deep gloss black lacquer finish is resistant to UV fade and complements Defender's darker trim options and black pack styling particularly well. Whether you're running your Defender in Santorini Black, Carpathian Grey, or any other colour, gloss black side vents introduce a cohesive, blacked-out aesthetic that ties together the grille, roof rails, and mirror caps into a unified visual language. This is a refined, understated upgrade — exactly the kind that Land Rover enthusiasts appreciate most. What's Included ◼ Left Side Vent Driver-side front wing vent assembly ◼ Right Side Vent Passenger-side front wing vent assembly 📦 Protective Packaging Individually wrapped to prevent transit damage Product Highlights Premium high-gloss black ABS plastic construction Exact OE dimensions — no cutting, drilling, or modification needed Supplied as a full pair: left and right assemblies included UV-resistant finish to resist fading and discolouration over time Designed specifically for the L663 Defender platform (2020 onward) Compatible with both Defender 110 (five-door) and Defender 90 (three-door) Direct clip-and-secure fitment into factory mounting points Complements black pack, dark atlas, and gloss black exterior trims Strict quality control and pre-shipment inspection on every unit Lightweight construction — no impact on vehicle dynamics or airflow Compatibility Vehicle Code Years Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Direct Fit Land Rover Defender 130 L663 2022–2026 8-Seat Extended Verify Before Purchase Defender (Original Series) L316 Pre-2016 All Not Compatible Range Rover Sport L494 / L461 All All Not Compatible Range Rover Vogue L405 / L460 All All Not Compatible Installation Notes Difficulty: Easy — Estimated Time: 20–40 minutes Ensure the vehicle is parked on a level surface with the engine off. Allow the vehicle to cool if recently driven. Locate the existing side vent grilles on both front wings of your Defender. These are held in place by a series of clips and, on some variants, small fasteners behind the wing liner. Using a trim removal tool or plastic pry lever, carefully release the clips along the perimeter of the factory vent. Work methodically around the edge to avoid stressing or cracking the surrounding trim panels. Once the original vent is free, clean the recess area with an isopropyl alcohol wipe to remove any dirt or residue from behind the panel. Align the new gloss black side vent into the mounting recess, ensuring all clip positions line up correctly before applying pressure. Press firmly and evenly around the perimeter until all clips are fully seated and the vent sits flush with the wing surface. Repeat the process for the opposite side. Step back and inspect both vents for alignment and panel gap consistency. ⚠ Please Note: No installation instructions are included with this product. If you are unfamiliar with plastic trim removal, we recommend having these fitted by a qualified vehicle technician or detailing professional to avoid any risk of damage to surrounding panels or paintwork. Complete the Look of Your Defender Explore our full range of Defender L663 exterior accessories — from gloss black grilles and mirror caps to bonnet protectors and side steps — all curated specifically for the 2020-onward platform. Shop Defender L663 Collection → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Expert Advice: +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the property of their respective owners.

Land Rover · Discovery Sport · Front Grille ABS Front Middle Grille – Gloss Black | Land Rover Discovery Sport 2015–2018 A direct-fit gloss black ABS front grille replacement that sharpens the Discovery Sport's face with a cleaner, more aggressive presence — no cutting, no drilling, no compromise. Discovery Sport L550 2015–2018 ABS Plastic Gloss Black Direct Fit No Drilling Racing Grille Style CCC Certified 112cm × 40cm 5kg Overview The Land Rover Discovery Sport (L550) sits at the heart of the Land Rover lineup — a capable, family-focused SUV that rewards owners who take pride in how it looks just as much as how it performs. Whether you're running school runs or weekend trails, the Discovery Sport's front end is the first thing people see, and the factory grille, while functional, often feels like an afterthought compared to the vehicle's overall character. This high-quality ABS front middle grille is designed specifically for Discovery Sport models produced between 2015 and 2018. Finished in deep gloss black, it replaces the standard centre grille section with a cleaner, more purposeful aesthetic — the kind of subtle visual upgrade that reads as factory-spec to the untrained eye but signals intent to those who know. The racing grille style adds a contemporary aggression without straying from the Discovery Sport's core design language. Constructed from high-grade ABS thermoplastic, this grille delivers the rigidity and UV resistance needed for long-term exterior use. At 112cm wide and 40cm tall, it covers the full middle grille aperture precisely. Fitment is straightforward — existing mounting points are retained, meaning no permanent modifications to your vehicle are required. This is the kind of upgrade Discovery Sport owners return to Victorious for: well-engineered, visually rewarding, and built to last. What's Included 🪟 Front Middle Grille Gloss black ABS, full replacement unit 🔩 Mounting Hardware Fixing clips and fasteners for secure fitment 📄 Fitment Guide Basic installation reference included 📦 Protective Packaging Foam-lined box for safe international transit Product Highlights Precision-engineered for Discovery Sport L550 2015–2018 direct fit High-grade ABS thermoplastic construction — rigid and UV stable Deep gloss black finish — clean, modern, and highly durable Racing grille style design adds visual aggression without modification Full 112cm × 40cm coverage across the front middle aperture Uses OEM mounting points — zero drilling or permanent changes required Lightweight at 5kg — no impact on vehicle weight balance or aerodynamics CCC externally certified for material safety and quality compliance Compatible with all trim levels across the 2015–2018 model year range Bolt-on DIY installation achievable in under two hours with basic tools Compatibility Vehicle Model Code Year Range Trim Fitment Land Rover Discovery Sport L550 2015 All Trims Direct Fit Land Rover Discovery Sport L550 2016 All Trims Direct Fit Land Rover Discovery Sport L550 2017 All Trims Direct Fit Land Rover Discovery Sport L550 2018 All Trims Direct Fit Land Rover Discovery Sport L550 2019–2024 (Facelift) All Trims Not Compatible Land Rover Discovery 5 L462 2017–2024 All Trims Not Compatible Land Rover Discovery 4 L319 2009–2016 All Trims Not Compatible Range Rover Evoque L538 / L551 All Years All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy · Estimated Time: 60–90 Minutes · Tools Required: Trim removal tool, flathead screwdriver, T20 Torx bit Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for easier access to the upper grille mounting points. Using a trim removal tool, carefully release the plastic clips securing the existing front middle grille to the bumper surround. Work from one end to the other to avoid cracking the surrounding trim. Remove any Torx screws (typically T20) securing the grille at the top or side mounting brackets. Keep all fixings in a safe container — you may need them for reassembly. Gently pull the original grille forward and away from the bumper aperture. Disconnect any wiring loom connectors if applicable to your trim level (e.g. adaptive cruise sensor surround). Align the new ABS gloss black grille into the aperture and press firmly into position, engaging each clip in sequence from centre outward. Refit any Torx screws to secure the upper edge. Step back and verify the grille sits flush and level across the full width. Close the bonnet and inspect the fitment from the front to confirm alignment before driving. ⚠ Note: If your Discovery Sport is equipped with a front parking sensor surround or adaptive cruise control module housed within the grille assembly, take particular care not to strain any wiring during removal. If in doubt, consult a Land Rover specialist or approved bodyshop before proceeding. Built for Discovery Sport Owners Who Care At Victorious Automotive, every product we stock is chosen because it earns its place on your vehicle. This gloss black front grille is one of the most impactful visual upgrades available for the 2015–2018 Discovery Sport — clean, purposeful, and properly engineered. Browse our full Discovery Sport collection for more exterior and interior upgrades trusted by owners across the world. Shop Discovery Sport Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Third Row Seat Back Protection for Toyota Land Cruiser 250 (2024+) Purpose-engineered third row seat back protection that shields your LC250's second-row upholstery from scuffs, kicks, and luggage contact — maintaining that factory-fresh interior for longer. LC250 2024+ Third Row Protection Interior Accessory Black Direct Fit No Tools Required Easy Clean Overview The Toyota Land Cruiser 250 represents a bold return to form — a genuine, body-on-frame workhorse wrapped in a refined, modern interior. For LC250 owners who regularly use all three rows, that rear cabin takes a significant amount of daily punishment: bags loaded against seat backs, children's feet making contact, sporting equipment sliding into upholstery. The wear accumulates quickly, and factory trim is not cheap to restore. This third row seat back protection panel has been developed specifically for the 2024+ Land Cruiser 250 to address exactly that problem. Fitted to the rear-facing surface of the third row seat backs, it acts as a durable shield between the boot area and your original upholstery — intercepting abrasion, dirt transfer, and impact before it reaches the fabric or leather beneath. Finished in a clean, understated black, the panel integrates naturally with the LC250's interior aesthetic without drawing attention to itself. It's the kind of accessory experienced 4x4 owners install on day one — not after the damage is already done. What's Included 🛡️ Third Row Seat Back Protection Panel 1 x full panel — black, direct-fit for LC250 2024+ 📎 Mounting Hardware / Fixings All necessary attachments included for secure fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut for direct fitment to the 2024+ Toyota Land Cruiser 250 Protects factory upholstery from scuffs, abrasion, and dirt transfer Durable, easy-to-wipe-clean surface material — ideal for daily use Slim profile that sits flush without altering cabin ergonomics Understated black finish complements the LC250 interior design No drilling, cutting, or specialist tools required for installation Fully removable — leaves no marks or residue on factory trim Shields against luggage, sporting kit, and boot-area contact Maintains long-term resale value by preserving interior condition Lightweight and low-profile — no impact on third-row usability Compatibility Vehicle Year Range Trim / Grade Fitment Toyota Land Cruiser 250 2024+ All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021+ All Variants Not Compatible Toyota Land Cruiser 200 Series 2007–2021 All Variants Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Variants Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🛠 Tools Required: None Ensure the third row seat backs are folded or in their upright position as required for access — no need to remove any seats. Clean the rear-facing surface of the third row seat back with a dry or lightly damp cloth to remove any dust or debris. Allow to dry fully. Align the protection panel against the seat back surface, using the pre-fitted fixings or attachment points to position it centrally and flush. Secure the panel using the included mounting hardware, pressing firmly at all contact points to ensure a stable, rattle-free fit. Check alignment and test that the panel is fully secure before loading the boot area. No adhesives or permanent fixings are used. ⚠ Note: This protection panel is designed exclusively for the 2024+ Toyota Land Cruiser 250. Do not attempt to fit this product to other Land Cruiser variants — panel geometry will not align correctly and fitment will be compromised. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser 250 interior accessories — designed for owners who expect the same attention to detail from their accessories as Toyota put into the vehicle itself. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way officially connected with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Range Rover Vogue · Exterior Protection Hood Bonnet Cover Stone Deflector & Protection Shield for Land Rover Range Rover Vogue (2018–2024) A precision-fitted bonnet guard engineered to defend the leading edge of your Range Rover Vogue against stone chips, road debris, sand, and insect damage — preserving that factory finish mile after mile. Range Rover Vogue 2018–2024 Stone Deflector Bonnet Guard Black Finish Adhesive Fit Exterior Protection No-Drill Install Overview The Range Rover Vogue sits at the very top of the luxury SUV landscape — a vehicle where condition matters as much as presence. Whether you're navigating motorway miles or tackling a gravel estate driveway, the leading edge of your bonnet is constantly exposed to stone strikes, grit, and airborne debris that can chip, crack, or dull the paintwork over time. Left unprotected, that damage accumulates quietly and becomes both costly and difficult to reverse. This bonnet stone deflector shield is designed specifically to fit the Range Rover Vogue across the 2018 to 2024 model years, sitting flush against the front hood lip to intercept and redirect incoming road debris before it ever makes contact with your paint. Finished in a clean, deep black, it complements the Vogue's refined exterior styling without altering its silhouette or introducing any visual bulk. Installation requires no drilling, no cutting, and no specialist tools. The unit bonds securely via a high-strength double-sided adhesive backing, making this one of the most accessible and rewarding exterior upgrades you can apply to your Vogue in under thirty minutes. It's the kind of detail that owners who care deeply about their vehicles understand immediately — quiet, purposeful, and entirely worth doing. What's Included 🛡️ Hood Stone Deflector Shield 1× pre-formed bonnet guard in gloss black 🔧 Adhesive Backing Strip Pre-applied high-bond double-sided tape 🧼 Surface Prep Wipe For cleaning bonnet edge prior to fitting 📄 Fitting Instructions Step-by-step installation guide included Product Highlights Precision-formed to fit Range Rover Vogue 2018–2024 bonnet profile exactly Deep gloss black finish integrates seamlessly with factory exterior trim Deflects stones, grit, sand, insects, and road debris from paintwork No drilling required — no damage to body panels or hood structure High-strength double-sided adhesive rated for outdoor and all-weather use UV-resistant construction to prevent fading, yellowing, or cracking Aerodynamic profile maintains clean airflow over the bonnet at speed Helps reduce long-term paint repair and touch-up costs significantly Supplied 100% brand new — not a refurbished or remanufactured part Installs in under 30 minutes with no specialist tools or experience needed Compatibility Model Generation Year Range Fit Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Vogue L460 2022–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Confirmed Range Rover Sport L461 2022–2024 Not Confirmed Range Rover Velar L560 2018–2024 Not Confirmed Defender L663 2020–2024 Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  |  🔧 Difficulty: Easy — No Tools Required Ensure the vehicle is parked in a clean, dry environment away from direct sunlight or extreme cold to allow the adhesive to bond properly. Thoroughly clean the leading edge of the bonnet using the included prep wipe, removing all dirt, wax, polish residue, and moisture. Allow to dry completely. Dry-fit the deflector shield along the bonnet edge without removing the adhesive backing. Check alignment and confirm it sits flush and level across the full width. Carefully peel back the adhesive liner on the deflector and, starting from one end, press firmly along the bonnet edge, working progressively to avoid air pockets or misalignment. Apply firm, even pressure along the full length of the deflector for 60 seconds to ensure full adhesive contact across the bonding surface. Avoid washing the vehicle or exposing the bonnet to prolonged moisture for at least 24–48 hours to allow the adhesive to cure fully and reach maximum bond strength. ⚠ Important: Do not attempt installation on a wet, cold, or freshly waxed bonnet surface. Adhesive performance is significantly reduced below 10°C. If you are unsure about compatibility with your specific model year or trim, please contact us before fitting — our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop the Full Range Rover Vogue Collection Explore our complete exterior accessory range for the Range Rover Vogue — from bonnet guards and door sill covers to mirror caps and body trims. Every product is hand-selected for quality and fit by our in-house Land Rover specialists. Shop Range Rover Vogue Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All model names, vehicle designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · LC300 · Exterior Engine Hood Cover for Toyota Land Cruiser 300 LC300 (2021–2024) Purpose-built hood protection and off-road aesthetic for the modern LC300 platform. LC300 2021–2024 Hood Protection Adhesive-Bonded Off-Road Ready Overview The Toyota Land Cruiser 300 LC300 (2021–2024) has established itself as a true workhorse—equally at home on tarmac and technical terrain. Your hood endures the full brunt of trail dust, stone chips, and UV exposure. This Engine Hood Cover offers genuine protection while delivering the rugged aesthetic that LC300 owners have come to expect. Engineered specifically for the LC300's bonnet contours, this cover is adhesive-bonded using automotive-grade materials that will not degrade paint or leave residue. It's available in Black (matte) or Pearl White (gloss), each finished to withstand moisture, temperature variance, and abrasion. Unlike generic hood covers, this piece respects the LC300's original engineering. Installation is straightforward, and the finish is indistinguishable from factory trim once applied. For owners who want protection without compromise, this is the standard. What's Included 📦 Engine Hood Cover Ready-fitted adhesive backing 📋 Installation Guide Step-by-step with prep checklist Product Highlights Engineered fitment for LC300 bonnet geometry (2021–2024) Automotive-grade adhesive; safe for factory paint Black (matte) or Pearl White (gloss) finish options UV-resistant polymer construction Temperature-stable from –10°C to +80°C Off-road aesthetics without functional compromise Protects against stone chips and UV degradation Tool-free installation; peel and press application Maintains hood opening and closure mechanics 30-day money-back guarantee (no questions) Compatibility Vehicle Model Years Fitment Toyota Land Cruiser 300 LC300 2021–2024 Direct Fit Toyota Land Cruiser LC250 / GR 2024+ Not Compatible Previous Land Cruiser models Pre-2021 Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Clean the bonnet. Wash with automotive soap and dry thoroughly. Wipe with isopropyl alcohol to remove any residue or oils. Position the cover. Center the hood cover on the bonnet. Do not remove backing yet. Use masking tape at the edges to mark alignment. Remove backing and apply. Starting at the center seam, peel the backing and press firmly. Work outward to eliminate air pockets. Use a soft roller or cloth to ensure even contact. Allow cure time. Do not open the hood for 24 hours. The adhesive reaches full strength after 48 hours. Verify fitment. Gently open and close the hood to confirm clearance and seal integrity. Note: Professional installation is recommended for optimal results and durability, especially in high-temperature climates or if your bonnet has existing surface damage. Ready to Protect Your LC300? This hood cover combines genuine protection with authentic off-road character. Order today and join over 12,300 verified owners who trust Victorious for their Land Cruiser, Range Rover, and Defender accessories. View LC300 Collection Use code 22GET20 for 20% off any 2 items 4.9/5 stars – 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota, Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names and logos are the property of their respective manufacturers. This product is an aftermarket accessory designed for compatibility with the specified vehicle model.

Victorious · Land Cruiser LC300 · Interior Styling Ignition Device Decoration Sticker – LC300 Carbon Fiber Sophisticated carbon fibre trim for your Land Cruiser ignition bezel—durable protection with premium aesthetic refinement. LC300 2021–2024 Carbon Fiber ABS Material Interior Trim Overview The Toyota Land Cruiser LC300 is a commanding presence on any road—and its interior deserves the same level of attention to detail you'd expect from its engineering. This Ignition Device Decoration Sticker elevates your cabin's visual hierarchy with authentic carbon fibre styling, replacing the standard plastic surround with purposeful, contemporary detailing. Engineered from durable ABS material, this sticker combines visual impact with practical durability. The carbon fibre pattern catches light beautifully in any cabin condition, while the finish resists fingerprints and wear far better than factory trim. It's the kind of understated upgrade that tells the story of an owner who cares about both form and function. Installation takes minutes with standard adhesive backing—no drilling, no modification, no permanent alteration to your vehicle. If you ever decide to change direction, removal is clean and damage-free. It's the thoughtful way to personalise your LC300 without compromise. What's Included 🎨 Ignition Sticker Pre-cut carbon fibre pattern decal 📋 Installation Guide Step-by-step instructions included 🛡️ Protection Film Guards against adhesive during shipping ✓ 30-Day Guarantee Full refund if not satisfied Product Highlights Direct-fit design engineered for LC300 ignition bezel (2021–2024) Authentic carbon fibre texture with premium tactile finish ABS polymer construction—lightweight yet resilient Scratch and abrasion-resistant to retain appearance over time Simple adhesive installation—no tools or expertise required Seamlessly integrates with factory interior colour and design language Maintains all ignition functionality and accessibility UV-stable formula resists colour fade in sunny climates Removable without surface damage or adhesive residue Backed by Victorious 30-day money-back guarantee Compatibility Model & Year Compatibility Toyota Land Cruiser LC300 (2021–2024) Direct Fit Toyota Land Cruiser LC300 (Pre-2021) Not Compatible Toyota Land Cruiser LC250 Not Compatible Other Toyota models Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Clean the surface. Use a microfibre cloth with isopropyl alcohol to remove dust, oils, and residue from the ignition bezel. Allow to dry completely (2–3 minutes). Peel backing. Carefully remove the protective backing from the adhesive side of the sticker. Align and position. Align the sticker with the ignition bezel edges. Use the factory trim as your guide. Start with the top edge and work downward to avoid air pockets. Press and secure. Gently press the entire surface using firm, even pressure from the centre outward. Use a soft cloth or squeegee to eliminate bubbles. Allow adhesive to cure. Wait 24 hours before operating the ignition or touching the sticker to allow the adhesive to achieve full bond strength. Important: Ensure the interior temperature is above 15°C (59°F) during installation. Cold conditions reduce adhesive performance. Do not expose to moisture for 48 hours after installation. Complete Your LC300 Interior Premium detailing is what separates a well-maintained Land Cruiser from an exceptional one. Add this carbon fibre ignition sticker to your collection of thoughtful upgrades and experience the difference intelligent design makes. View All LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT 📞 Expert support – +44 203 943 9919 Victorious Automotive is an independent specialist retailer. We are not affiliated with Toyota Motor Corporation, Land Rover, or any official manufacturer. All vehicle names, logos, and designs are the property of their respective owners. Product compatibility and fitment are the responsibility of the purchaser and should be verified before purchase. ```

Victorious Automotive · Range Rover Sport L494 & Vogue L405 · Interior Accessories Illuminated Door Sill Scuff Plates for Range Rover Sport L494 & Vogue L405 (2014–2019) LED-lit door sill protection that guards against everyday entry scuffs while casting a refined ambient glow across your cabin threshold — day and night. Range Rover Sport L494 Range Rover Vogue L405 2014–2019 LED Illuminated Set of 4 Direct Fit Scuff Protection Interior Upgrade Overview The Range Rover Sport L494 and Vogue L405 occupy a rare space — vehicles that balance genuine performance capability with boardroom-level interior refinement. Every detail inside the cabin is deliberate, and the door sills are no exception. They're one of the first surfaces your eye falls on when entering, and one of the first areas to show wear from repeated foot contact. Protecting them — and elevating them — simply makes sense. These Illuminated Door Sill Scuff Plates are engineered specifically for 2014–2019 Sport L494 and Vogue L405 models, integrating directly with your vehicle's existing electrical system to deliver crisp LED illumination across each sill panel. The result is a premium ambient effect that activates on door open, casting a subtle glow across the entry point and adding a layer of sophistication that complements the Range Rover's interior character without overpowering it. Beyond aesthetics, the primary function of these plates is protective. The brushed finish panels sit flush over the factory sill area, absorbing scuffs and scratches from footwear that would otherwise mark or chip the painted or lacquered trim beneath. It's a functional upgrade with a visual payoff — exactly the kind of considered modification that Range Rover owners tend to appreciate. What's Included 💡 4× Illuminated Scuff Plates Front and rear sill plates, LED-equipped, set of four 🔌 Wiring Loom & Connectors Pre-terminated harness for clean integration 🔩 Fitting Hardware All fixings and adhesive clips included 📄 Installation Instructions Step-by-step guide included in the box Product Highlights Precision-designed for Range Rover Sport L494 and Vogue L405 door sill profiles LED illumination activates automatically on door open for immediate ambient effect Protects factory sill trim from scratches, scuffs, and paint chipping Integrated lettering adds a model-specific premium visual identity Improves nighttime cabin entry visibility without harsh interior lighting Energy-efficient LED technology draws minimal current from vehicle electrics Robust construction built to withstand daily use and weather exposure Flush-fit design maintains the factory aesthetic — no gaps or proud edges Full set of four covers all door entry points front and rear Reversible installation — no permanent modification to the vehicle required Compatibility Model Code Year Range Fitment Range Rover Sport L494 2014–2019 Direct Fit Range Rover Vogue L405 2014–2019 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Sport L320 Pre-2014 Not Compatible Unsure of your exact model code? Check your VIN plate or call us on +44 203 943 9919 and we'll confirm fitment before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Panel pry tools, trim clips, basic wiring knowledge Open all four doors and carefully remove the existing factory door sill trim panels using a trim pry tool — work slowly from each corner to avoid clip damage. Clean the exposed sill surface thoroughly with an isopropyl alcohol wipe to ensure adhesive backing bonds correctly. Route the pre-terminated wiring loom from each sill position toward the door jamb, connecting into the vehicle's door-trigger circuit using the supplied connectors. Press each illuminated scuff plate firmly into position, aligning the panel with the factory mounting points and engaging all clips evenly along the length. Test each LED panel by opening the corresponding door before refitting any surrounding trim. Confirm consistent illumination across all four plates. Refit all door jamb and surrounding trim pieces, ensuring all clips are fully engaged and panels sit flush with no gaps. ⚠ Note: Professional installation is recommended if you are unfamiliar with automotive wiring or interior trim removal. Incorrect wiring connections may affect vehicle electrics. Always disconnect the vehicle battery before working with any electrical components. Elevate Every Entry The door sill is the first thing you see when you open the door — and the first surface to take a beating. These illuminated plates protect what matters while adding a finishing touch that makes your Sport or Vogue feel exactly as special as it should. Shop the full range of interior accessories for your L494 or L405 below. Shop Range Rover Sport L494 Accessories Shop Range Rover Vogue L405 Accessories Buying two items? Use code 22GET20 for 20% off your order. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Illuminated LED Tailgate Cover – RANGE ROVER Design for Range Rover Sport L461 (2022+) A bold, chain-link tailgate panel with integrated red LED illumination — purpose-built for the 2022+ Range Rover Sport L461 to redefine your rear presence, day and night. L461 2022–2026 Red LED Chain-Link Design ABS Construction Gloss Black OEM Fitment Direct Fit Waterproof Overview The Range Rover Sport L461 is a vehicle that commands attention on its own terms — with its sculpted haunches, low-slung roofline, and assertive rear end. But for owners who want to push the visual identity further, the factory tailgate finish leaves room for personalisation. This illuminated LED tailgate cover is designed specifically for that opportunity. Featuring a distinctive chain-link surface pattern finished in gloss black ABS, this cover overlays your existing rear tailgate trim with a custom, structural aesthetic. At its core is an integrated red LED light strip spelling out the RANGE ROVER lettering, wired directly into your tail lights, brake circuit, or ignition feed — so it activates automatically alongside your vehicle's lighting system. The effect is clean, confident, and unmistakably intentional. Built to withstand the elements, the ABS shell is both UV-stable and waterproof, meaning it performs just as well on a dark winter evening as it does under a bright summer sky. Whether you're running a Black Pack specification or looking to introduce contrast trim to a lighter exterior, this piece integrates without compromise. What's Included 🔲 LED Tailgate Cover Chain-link design, gloss black ABS with pre-installed red LED strip 💡 Pre-Installed LED Strip Red illuminated RANGE ROVER lettering, factory-fitted into the cover 🔌 Wiring Harness Complete loom for connection to tail lights, brake circuit, or ignition 🔧 Installation Accessories All necessary fixings, clips, and adhesive for a secure fit Product Highlights Integrated red LED RANGE ROVER lettering strip illuminates with tail lights or ignition Striking chain-link surface pattern adds depth and custom character to the rear end Gloss black ABS frame complements Black Pack, dark chrome, or carbon styling OEM-style fitment — designed to overlay the factory tailgate trim with no modification Durable ABS construction rated waterproof, UV-stable, and impact-resistant Wiring harness supports connection to tail lights, brake circuit, or ignition feed Equally striking in daylight with the chain-link detailing and gloss black finish Activates automatically — no switches or manual controls required once wired Precision-engineered exclusively for the Range Rover Sport L461 (2022 onwards) Professional-grade finish with no visible fixings for a clean, factory-like appearance Compatibility Vehicle Code Year Range Fitment Range Rover Sport SE L461 2022–2026 Direct Fit Range Rover Sport Dynamic SE L461 2022–2026 Direct Fit Range Rover Sport Dynamic HSE L461 2022–2026 Direct Fit Range Rover Sport Autobiography L461 2022–2026 Direct Fit Range Rover Sport (factory LED tailgate trim) L461 2022–2026 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Compatible with all standard trim levels on the L461 platform. Not suitable for vehicles fitted with factory illuminated or LED tailgate trim panels from the factory. Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes Carefully remove the existing factory tailgate trim panel using a trim removal tool — work from the outer edges inward to avoid cracking the surround. Dry-fit the LED tailgate cover to confirm alignment and check panel gap consistency before committing to installation. Route the supplied wiring harness through the tailgate body to your chosen circuit — tail lights, brake feed, or ignition live. Ensure all routing is away from heat sources and moving components. Connect the wiring harness to your chosen feed using the included connectors. Test LED illumination before securing the panel. Secure the tailgate cover using the supplied clips and adhesive backing. Apply firm, even pressure across the surface and allow the adhesive to cure before closing the tailgate repeatedly. Confirm all wiring is secured and concealed. Test full LED function across tail light, brake, and (if used) ignition activation. ⚠ Professional Installation Recommended. Wiring into your vehicle's lighting circuit should be carried out by a competent auto electrician or experienced installer. Incorrect wiring may affect vehicle lighting systems. Always disconnect the battery before beginning any electrical work. Signature Rear-End Identity for Your Range Rover Sport Browse the complete Range Rover Sport L461 collection at Victorious Automotive — curated exterior, interior, and protection accessories built for owners who take pride in every detail. Shop Range Rover Sport L461 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Toyota Land Cruiser LC300 · Interior Protection Inner Door Bowl Patch for Toyota Land Cruiser 300 Premium stainless steel protection that shields your LC300's door interior from scratches, scuffs, and daily wear while elevating cabin aesthetics. LC300 2021–2024 Stainless Steel Door Bowl Protection Direct Fit About Your Land Cruiser The Toyota Land Cruiser 300 series (LC300) represents the pinnacle of modern expedition capability. Introduced in 2021, this generation combines legendary off-road resilience with a refined, technology-forward interior. Every detail matters when you own a vehicle this accomplished—and your door interiors deserve the same attention to quality as your exterior finish. Interior door bowl surfaces are exposed to constant contact: your hands, gear, luggage, and the subtle abrasion of daily use. Without protection, these areas develop micro-scratches and dulling that compromise the cabin's premium feel and resale appeal. Our Inner Door Bowl Patch transforms this vulnerability into a protected asset. Precision-engineered from brushed stainless steel, it guards the door's vulnerable bowl area against contact wear while adding a functional, professional accent that enhances your LC300's interior presence. What's Included 🛡️ Stainless Steel Patch Set One pair (driver + passenger side) ✨ Premium Adhesive Backing 3M-equivalent self-adhesive system 🎯 Direct Fit Design Zero modification required 📦 Installation Guide Step-by-step instructions included Product Highlights Brushed stainless steel construction resists fingerprints and oxidation Pre-cut to factory door bowl contours—no trimming needed Scratch and abrasion protection without visible bulk Available in Black or Silver finishes Self-adhesive backing—no drilling, bolts, or interior trim removal Improves perceived interior quality and cabin ambiance Perfect integration with LC300 design language Protects resale value by preventing contact wear Easy to clean and maintain with standard detailing products Backed by 30-day money-back guarantee Compatibility Model Year Range Generation Fit Toyota Land Cruiser 300 2021–2024 J300 Direct Fit Toyota Land Cruiser 200 2007–2021 J200 Not Compatible Toyota Land Cruiser 250 2024+ J250 Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 10–15 minutes Prepare the surface: Clean both door bowl areas thoroughly with isopropyl alcohol or mild soap and water. Dry completely with a soft, lint-free cloth. Allow 5 minutes for full drying. Position the patches: Carefully align the first patch on the driver-side door bowl. Check alignment from multiple angles before committing to adhesive contact. Apply with firm pressure: Once aligned, press firmly and evenly across the entire patch for 30 seconds. Work from the center outward to avoid air bubbles. Repeat for passenger side: Follow the same process for the passenger-side door bowl, maintaining consistent alignment with the driver-side patch. Cure time: Allow 24 hours before exposing the patches to moisture or heavy use. This ensures the adhesive reaches maximum bond strength. Important: Verify your vehicle's door bowl dimensions match the product images before installation. Surface contamination (dust, oils, or residual wax) will compromise adhesion. Test fit without removing the backing first if you're unsure of alignment. Protect Your LC300's Interior Today Simple, direct-fit protection that keeps your Land Cruiser's cabin looking showroom-fresh. No modifications. No compromise. Just premium defence where it matters. Shop LC300 Accessories Use code 22GET20 for 20% off when ordering any 2 items 4.9★ 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee ☎ +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent, premium aftermarket specialist. We are not affiliated with, endorsed by, or connected to Toyota, Land Rover, Range Rover, Jaguar Land Rover, or any manufacturer. All references to vehicle names, trademarks, and brand identities are used solely for fitment and compatibility description.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Protection Anti-Slip Interior Mats – Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precisely formed anti-slip mats that protect every surface of your LC250's interior, preventing items from shifting, reducing cabin noise, and preserving the original trim in immaculate condition. LC250 Prado 2024–2025 Anti-Slip Interior Protection Custom Fit No Drilling Black / Red / White Luminous Direct Fit Overview The Toyota Land Cruiser 250 — sold globally as the Prado LC250 — represents a new generation of refined off-road capability, blending premium interior appointments with serious go-anywhere credentials. Owners invest considerably in this vehicle, and the factory trim deserves protection that matches its quality from the moment it leaves the showroom floor. These anti-slip interior mats are engineered specifically for the 2024 and 2025 Land Cruiser 250, providing custom-fit coverage across the interior surfaces most vulnerable to everyday wear, scratching, and item movement. Whether it's loose items sliding across the centre console during a trail run or everyday debris accumulating in storage recesses, these mats step in as a silent layer of protection that is both functional and discreet. The textured anti-slip surface grips items in place while the mat itself stays anchored to the factory panel — no adhesives, no permanent fixings, no risk of damage. Available in Black, Red, and White Luminous, there is an option to blend seamlessly with the standard interior or introduce a subtle accent of colour for those who prefer a more personalised cabin aesthetic. What's Included 🛡️ Anti-Slip Mat Set Full set of mats for designated interior areas 📐 Custom-Cut Profile Pre-shaped to fit LC250 interior recesses precisely 🎨 Choice of Colour Black, Red, or White Luminous finish 📄 Fitment Guide Placement reference included for easy installation Product Highlights Precision-cut to match the exact interior profile of the Land Cruiser 250 (LC250) 2024–2025 Textured anti-slip surface prevents items from sliding during cornering, acceleration, or off-road use Protects original factory panels from scratches, scuffs, and surface wear Reduces unwanted cabin rattles caused by loose items shifting in storage areas No adhesives or permanent fixings required — fully reversible installation Easy-clean surface resists dust, dirt, and moisture — wipes clean in seconds Lightweight and low-profile — virtually invisible once placed in position Available in three colour options: Black, Red, and White Luminous Durable material construction designed for long-term use without degradation Maintains resale value by preserving the condition of original interior trim surfaces Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Toyota Fortuner / 4Runner — All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Remove any existing items or debris from the interior storage areas, door pockets, and console surfaces where the mats will be placed. Dry-fit each mat against its designated interior area to confirm correct orientation and profile alignment before final placement. Press each mat firmly and evenly into position, ensuring all edges sit flush against the surrounding factory trim. Place a small item on each mat to confirm anti-slip grip is active and the mat remains stationary on the panel below. To remove for cleaning, simply lift from any corner — no adhesive residue, no marks left on the original surface. Note: These mats are designed for placement in interior storage recesses and console areas only. Do not place under or over safety-critical components such as airbag panels, seat belt mechanisms, or pedal areas. Always ensure mats are correctly seated and do not obstruct vehicle operation. Protect Your LC250 From the Inside Out Small details define a well-kept interior. These anti-slip mats are the effortless upgrade your Land Cruiser 250 deserves — fitted in minutes, protective for years. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, endorsed by, or sponsored by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Interior Door Handle Protection Kit – Toyota Land Cruiser 250 / Prado LC250 (2024+) Precision-moulded ABS door handle guards that shield your LC250's interior from daily scratches, scuffs, and wear — without touching a single tool. LC250 Prado 250 2024+ ABS Material Carbon Fibre Pattern Silver Finish Anti-Scratch No-Drill Install Interior Accessory Overview The Toyota Land Cruiser 250 — also marketed as the Prado LC250 in select markets — represents a significant step forward in Toyota's legendary 4x4 lineage. With a redesigned interior that places greater emphasis on premium materials and clean surfaces, it's an environment worth protecting from day one. Every time a hand reaches for a door handle, that surrounding trim is at risk of micro-scratches, fingernail marks, and progressive surface dullness. This interior door handle protection kit is engineered specifically for the LC250's cabin geometry. Formed from high-grade ABS plastic with a precision surface finish, each guard sits flush against the door panel surround and acts as a barrier between daily use and your vehicle's factory trim. Available in a Carbon Fibre Pattern for a sportier look, or a clean Silver finish for those who prefer a more understated, OEM-adjacent aesthetic. Unlike generic fitments, these guards are designed to align exactly with the LC250's existing panel contours and factory hole positions — preserving the original lines of the interior without compromise. The peel-and-stick installation method means no drilling, no damage, and no residue. Clean, confident, and built to last. What's Included 🛡️ Door Handle Protection Kit Full set of interior door handle guards for LC250 🔧 Pre-Applied Adhesive 3M-grade adhesive backing — no tools required 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Custom-moulded to fit the Toyota Land Cruiser 250 / Prado LC250 exactly High-grade ABS construction — rigid, lightweight, and durable Anti-scratch surface coating protects both guard and surrounding trim Available in Carbon Fibre Pattern or Silver — two distinct aesthetics Preserves all factory hole positions and interior panel lines No-drill, no-cut paste-on installation — clean and reversible Protects against daily fingernail marks, keys, and general abrasion Seamless flush fitment — looks factory-integrated, not aftermarket UV-stable finish — won't fade, yellow, or degrade in cabin heat Ideal for both personal ownership and fleet/lease vehicle protection Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024 onwards Direct Fit Toyota Land Cruiser Prado (LC250 Generation) Prado 250 2024 onwards Direct Fit Toyota Land Cruiser 300 Series LC300 2021 onwards Not Compatible Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 LC150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin with all four door panels accessible. Ensure the vehicle has been parked and interior surfaces are at room temperature. Thoroughly clean the door handle surround areas with an isopropyl alcohol wipe or a lint-free cloth with a mild interior cleaner. Remove any grease, dust, or residue that may compromise adhesion. Allow the surfaces to dry completely — at least 5 minutes — before proceeding. Do not rush this step. Dry-fit each guard against its corresponding panel to confirm alignment with factory contours and any pre-existing hole positions before peeling the adhesive backing. Peel the adhesive backing from the first guard and carefully align it in position, starting from one edge and pressing progressively to avoid air bubbles. Apply firm, even pressure across the entire surface of each guard for 30–60 seconds to activate the adhesive bond fully. Repeat for all remaining guards. Allow 2–4 hours before the first use for the adhesive to fully cure. ⚠ Important: Do not install in cold or damp conditions — adhesive performance is significantly reduced below 10°C or on surfaces with any moisture present. For best results, install indoors at ambient temperature. Complete Your LC250 Interior Browse the full range of Toyota Land Cruiser 250 accessories at Victorious Automotive — trusted by 12,300+ owners worldwide with a 4.9-star rating and a 30-day money-back guarantee. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL / FedEx / UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.