Productos

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Tail Door Switch Frame Cover Trim for Land Rover Discovery Sport (2015–2019) A precision-cut, adhesive-backed silver ABS trim panel that replaces the bare plastic around your Discovery Sport's tail door switch with a clean, premium finish — no tools, no fuss. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Tail Door Switch Adhesive Fit Interior Trim ISO9001 Certified Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that rewards attention to detail. Its cabin is well-proportioned and functional, but the factory plastic trim around the tail door switch area — like many elements of the pre-facelift interior — can look unfinished or tired over time, particularly on higher-mileage examples or vehicles that have seen regular family use. This ABS silver tail door switch frame cover trim is designed specifically to address that. Precision-moulded to follow the exact contours of the switch surround, it sits flush against the panel and adheres cleanly using a pre-applied double-sided tape backing. The result is an immediate uplift in perceived quality — the kind of small change that makes the whole rear cabin feel more considered and complete. Manufactured in an ISO9001-certified facility from high-grade ABS plastic, the silver finish is consistent, durable, and resistant to the minor knocks and scuffs that rear door areas routinely encounter. For Discovery Sport owners who take pride in maintaining their vehicle's presentation, this is a straightforward, low-effort upgrade that delivers a genuinely noticeable result. What's Included 🪟 Tail Door Switch Frame Cover 1 × silver ABS trim panel, pre-cut to fit 🔲 Double-Sided Adhesive Tape Pre-applied to reverse — ready to install 📋 Installation Guide Basic fitting instructions included Product Highlights Precision-moulded ABS plastic — exact fit for L550 Discovery Sport Silver finish adds a clean, modern premium look to the tail door area Pre-applied double-sided adhesive — no drilling or modification required High-grade ABS construction resists daily wear, knocks and scuffs ISO9001-certified manufacturing for consistent quality and tolerances Designed specifically for 2015–2019 model year Discovery Sports Sits flush and seamlessly against the existing switch panel surround Lightweight construction — no impact on door mechanism or weight Reversible fitment — can be removed without damaging original trim A cost-effective interior refresh with immediate visual impact Compatibility Vehicle Code Year Range Fit Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020 – 2024 Verify Before Purchase Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 5 L462 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Open the tail door fully and ensure the switch surround area is clean, dry, and free from any grease, wax, or residue. A light wipe with isopropyl alcohol is recommended for optimal adhesion. Dry-fit the trim panel against the switch surround before removing the adhesive backing — confirm the panel sits flush and aligns precisely with all switch cutouts. Peel the protective film from the pre-applied double-sided adhesive tape on the reverse of the trim panel. Position the trim carefully against the switch surround, aligning from one edge and pressing progressively across the panel to avoid air bubbles or misalignment. Apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing the trim to heavy use or moisture for maximum bond strength. ⚠ Note: Ensure the trim is compatible with your specific Discovery Sport model year and body configuration before installation. If your vehicle has been previously modified or has non-standard trim panels, dry-fit carefully before committing the adhesive. Once bonded, removal may require a trim removal tool and gentle heat application. Upgrade Your Discovery Sport Interior Explore our full range of interior trim accessories for the Land Rover Discovery Sport — from door handle surrounds to dashboard accents, every piece is selected for quality, fitment and lasting finish. Shop Discovery Sport Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Nombre de la marca: metyoucar Origen: CN(Origen) Nombre del modelo: LLK3002 Certificación de pruebas externas: ISO9001 Altura del artículo: 10 cm Longitud del artículo: 30 cm Tipo de material: ABS Tipo de artículo: Molduras interiores Peso del artículo: 300 g Ancho del artículo: 15 cm Año: 2004-2009 color: Plata.Negro.Grano de madera negro Modelo de montaje: Para Land Rover Discovery 3 LR3 2004-2009 Instalación: La parte trasera con cinta adhesiva para automóviles.

Nombre de la marca: metyoucar Origen: CN(Origen) Nombre del modelo: LLK2821 Certificación de pruebas externas: ISO9001 Altura del artículo: 10 cm Longitud del artículo: 30 cm Tipo de material: ABS Tipo de artículo: Molduras interiores Peso del artículo: 300 g Ancho del artículo: 15 cm Año: 2004-2009 3 colores: plata, negro, grano de madera negro. Modelo de montaje: Para Land rover Discovery 3 2004-2009 Instalación: La parte trasera con cinta adhesiva para automóviles.

Victorious · Discovery Sport · Interior Trim Navigation Frame Cover Trim for Land Rover Discovery Sport L550 Premium ABS trim ring that refreshes your infotainment surround with a seamless factory-finished look in silver or black. L550 2015–2019 ABS Plastic Silver / Black Adhesive Backed Overview The Land Rover Discovery Sport L550 is a capable compact SUV that balances luxury with practicality. Over time, the factory navigation frame can show wear or fade, detracting from an otherwise immaculate cabin. This Navigation Frame Cover Trim restores visual cohesion to your dashboard with a precision-fitted surround that integrates seamlessly with your existing interior architecture. Manufactured from premium ABS plastic, this trim ring arrives in your choice of Silver or Black to complement your Discovery Sport's color scheme and styling preferences. The durable material resists fading, cracking, and discoloration—essential qualities for a high-touch interior component exposed to UV light and daily use. ISO9001 manufacturing ensures consistent quality across every unit. Installation is straightforward: the cover comes with industrial-strength double-sided adhesive pre-applied, eliminating the need for fasteners, drilling, or adhesives. The entire job takes minutes, leaving no permanent modifications to your vehicle. It's the intelligent choice for owners seeking a quick, reversible interior upgrade. What's Included 📦 Navigation Frame Cover Single precision-cut trim ring, ready to install ✨ Pre-Applied Adhesive Factory-backed 3M double-sided tape for secure fit 🎨 Finish Options Silver or Black—choose your preferred aesthetic 📋 Installation Guide Clear instructions with positioning and technique tips Product Highlights Direct Fit: Engineered for L550 (2015–2019) models; no modification required Premium ABS Material: Durable, UV-resistant, resists fading and cracking Factory Finish: Satin Silver or Gloss Black—matches OEM quality perfectly Adhesive Backed: No drilling, no fasteners—clean installation in minutes ISO9001 Certified: Manufactured to international quality standards Reversible Upgrade: Won't damage original trim when removed with care Seamless Integration: Blends naturally with dashboard layout and design language Cabin Refresh: Instantly modernizes interior without replacing entire components Low-Maintenance: Easy to clean with standard interior detailing products Worldwide Warranty: 30-day money-back guarantee on all Victorious products Compatibility Model Year Range Compatibility Land Rover Discovery Sport 2015 Direct Fit Land Rover Discovery Sport 2016 Direct Fit Land Rover Discovery Sport 2017 Direct Fit Land Rover Discovery Sport 2018 Direct Fit Land Rover Discovery Sport 2019 Direct Fit Land Rover Discovery Sport 2020+ Not Compatible Installation Guide Difficulty: Beginner | Time: 5 minutes Clean the area: Use a microfiber cloth and interior detailing spray to thoroughly clean the existing navigation frame. Remove any dust, residue, or fingerprints. Allow to dry completely. Test fit: Carefully align the cover trim with the navigation frame opening. Check all edges for proper fit—there should be no gaps or overhang. Peel backing: Once satisfied with alignment, slowly peel back the adhesive backing, working from one end to the other (corner-to-corner works best). Apply firmly: Press the cover firmly onto the frame, applying steady pressure across the entire surface for 10–15 seconds to ensure full contact and bonding. Cure time: Allow 24 hours before interacting with the trim to ensure the adhesive reaches full strength. Important: If the vehicle has been in direct sunlight, warm the dashboard slightly with a heat gun (low setting, 6 inches away) to soften the adhesive and improve bonding. Do not force the cover into place—gentle, even pressure ensures the best result and prevents adhesive failure. Ready to Elevate Your Interior? Restore your Discovery Sport's cabin to showroom condition with this premium navigation frame trim. It's a small change that transforms the entire aesthetic. Shop Discovery Sport Trims Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews ✓ 30-Day Guarantee ⚡ DHL/FedEx Worldwide 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product fitment and compatibility are based on original equipment specifications; individual vehicles may vary. Warranty and support are provided exclusively by Victorious Automotive.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim ABS Steering Wheel Button Frame Cover – Land Rover Discovery 5 LR5 (2021–2022) A precision-fitted steering wheel button frame cover that refreshes the heart of your Discovery 5's interior with a clean, customised finish — no tools required. Discovery 5 LR5 2021–2022 ABS Plastic Carbon Fibre Finish Gloss Black Matt Black Oak Wood Grain No-Tool Install Interior Trim Overview The Land Rover Discovery 5 is a vehicle built for those who refuse to compromise — equally at home on a motorway cruise or a technical trail. Its interior is a place you spend real time in, and every detail of it matters. The steering wheel sits at the centre of that experience, and the button frame surrounding it is one of the first things your hands find each time you take the wheel. This ABS steering wheel button frame cover is designed specifically for the 2021–2022 Discovery 5 (LR5), slotting precisely over the factory button surround to deliver an immediate and noticeable upgrade. Available in four distinct finishes — Carbon Fibre, Oak Wood Grain, Gloss Black, and Matt Black — there's an option to complement any interior theme, whether you're working towards a sport-focused look or a refined, premium aesthetic. Constructed from high-quality ABS plastic, this cover is engineered to sit flush with no gaps, no flex, and no rattles. The adhesive-backed installation means you can achieve a confident, professional result in minutes without reaching for a single tool. It's the kind of detail that's subtle enough to look factory-fitted, yet distinctive enough to remind you it isn't. What's Included 🎛️ Steering Wheel Frame Cover 1 x ABS button frame trim piece in your chosen finish 🔲 Pre-Applied 3M Adhesive Double-sided tape pre-fitted to the reverse for a clean bond Product Highlights Precision-engineered for a direct fit on 2021–2022 Discovery 5 (LR5) steering wheels Four finish options: Carbon Fibre, Oak Wood Grain, Gloss Black, and Matt Black High-quality ABS plastic construction — resistant to heat, UV, and daily wear Tool-free installation using pre-applied double-sided adhesive — takes minutes Flush fit with no visible gaps, edges, or movement once bonded Lightweight construction — no impact on steering wheel weight or button function Does not obstruct or interfere with steering wheel button operation Easy to remove and refit without damaging factory surfaces 100% brand new — supplied in protective packaging to prevent transit damage An affordable, high-impact interior upgrade with a factory-finished appearance Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery 5 LR5 / L462 2021–2022 Direct Fit Land Rover Discovery 5 LR5 / L462 2017–2020 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Start with the steering wheel in the straight-ahead position and ensure the surface is clean and dry. Use an isopropyl alcohol wipe to degrease the factory button frame area thoroughly. Hold the cover up against the steering wheel button surround and confirm the fit before bonding — check that all edges align correctly and button cutouts are properly positioned. Peel the protective backing from the pre-applied double-sided adhesive on the reverse of the cover. Carefully align the cover over the button frame starting from one edge, pressing it down progressively to avoid trapping air bubbles beneath the surface. Apply firm, even pressure across the entire face of the cover for 30–60 seconds to ensure a strong initial bond. Allow a minimum of 24 hours for the adhesive to fully cure before applying stress to the cover. Avoid touching controls aggressively during this period. ⚠ Important: Ensure the surface is completely free of wax, polish, or silicone dressing before applying. Fitting to a dirty or contaminated surface will significantly reduce adhesive strength. If you are unsure of compatibility with your specific build date or steering wheel variant, please contact us before ordering. Complete Your Discovery 5 Interior Browse our full range of Land Rover Discovery 5 interior accessories — from dashboard trim covers to gear selector surrounds — and build a cabin that reflects how seriously you take your vehicle. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim ABS Window Lift Switch Button & Child Safety Door Lock Cover Trim Stickers — Land Rover Discovery 5 (2017–2023) A precision-crafted set of interior trim stickers that refresh your Discovery 5's door panel switches with a tailored, factory-finish feel — available in five premium finishes. Discovery 5 L462 2017–2023 ABS Plastic Adhesive Fit No Drilling 4-Piece Set 5 Finish Options Interior Trim Overview The Land Rover Discovery 5 is a vehicle built for those who demand both capability and refinement. Whether navigating urban commutes or long-distance overland routes, its interior is where you spend the most time — and the details matter. The door panel switches, used every single journey, are one of those touchpoints that quietly define the quality of the cabin experience. These ABS window lift switch button and child safety door lock cover trim stickers are designed specifically for the Discovery 5 (2017–2023), covering all four door panels with a single set. Each piece is moulded from high-grade ABS plastic and finished in your choice of Rose Wood Grain, Oak Wood Grain, Carbon Fiber, Silver, or Gloss Black — giving you the freedom to complement or contrast the existing interior palette of your vehicle. Installation requires no specialist tools, no modification, and no professional fitting. The factory-matched profile and double-sided adhesive backing ensure a flush, rattle-free result that looks as though it left the production line that way. Whether you're refreshing a tired interior or simply elevating an already well-kept cabin, this is one of the most cost-effective upgrades available for the Discovery 5. What's Included 🪟 Window Lift Switch Covers 2 pieces — driver and passenger doors 🔒 Child Safety Lock Covers 2 pieces — rear door panels 🖇️ Pre-Applied Adhesive Double-sided tape pre-fitted to each piece 📋 Installation Guide Basic instruction sheet included Product Highlights Precision-moulded ABS plastic construction for a rigid, OEM-quality feel Five finish options: Rose Wood Grain, Oak Wood Grain, Carbon Fiber, Silver, Gloss Black Tailored specifically to the Discovery 5 L462 door panel geometry Pre-applied double-sided adhesive for a clean, tool-free installation Covers both window lift switch panels and child safety lock surrounds Adds a premium layered texture to an otherwise flat factory switch panel Resistant to everyday wear, UV fading, and minor moisture exposure No permanent modification — fully reversible if required Compatible with all trim levels of the 2017–2023 Discovery 5 Ships as a complete 4-piece set covering all door positions Compatibility Vehicle Years Trim Level Fitment Land Rover Discovery 5 (L462) 2017–2023 S / SE / HSE / HSE Luxury / First Edition Direct Fit Land Rover Discovery 4 (L319) 2009–2016 All Not Compatible Land Rover Discovery 3 (L319) 2004–2009 All Not Compatible Discovery Sport (L550) 2015–2023 All Not Compatible Range Rover Sport L494 2013–2022 All Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🛠 Tools Required: None Begin with the vehicle parked and all windows closed. Ensure the door panels are at room temperature — avoid installation in cold or damp conditions. Thoroughly clean each switch panel surface using an IPA (isopropyl alcohol) wipe or equivalent degreaser. Remove any dust, oils, or residue and allow to dry fully. Dry-fit each trim piece over its corresponding switch panel before peeling the adhesive backing, confirming the alignment and profile match is correct. Peel the protective liner from the double-sided adhesive on the first trim piece and carefully align it over the switch panel, pressing from the centre outward to avoid air bubbles. Apply firm, even pressure across the entire surface for 20–30 seconds to ensure full adhesive contact. Repeat for all remaining pieces. Allow 1–2 hours before subjecting the panels to moisture or heavy contact for maximum bond strength. ⚠ Note: Do not apply to surfaces that have been recently polished with silicone-based products, as this may reduce adhesion. If the trim piece requires repositioning, do so within the first 30 seconds before the adhesive sets. Avoid peeling aggressively — use a plastic trim tool if removal is needed to protect the underlying panel. Explore More for Your Discovery 5 Browse our full range of interior and exterior upgrades tailored specifically to the Land Rover Discovery 5 — from premium trim accessories to functional performance enhancements. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Para Land Rover Discovery 5 LR5 L462 Sin taladro antideslizante freno de combustible pastillas de acero cubierta de pedales para Range Rover Sport Vogue 2014-2018 Artículo: cubierta de pedales de almohadillas Material: hecho de acero inoxidable y caucho de calidad. Color: como imagen Característica: protege tu coche. Compatible con Landrover Discovery 5 2017 2018 2019. Para rango Rover deporte 2014-2018 Para Range Rover Vogue 2013-2019.

Victorious Automotive · Range Rover & Discovery · Interior Upgrades Adjustable Armrest Knobs for Range Rover Vogue L405, Range Rover Sport L494 & Land Rover Discovery 5 LR5 (2014–2022) Precision-machined aluminium alloy armrest adjustment knobs that replace tired OEM plastic with a tactile, refined finish — a small detail that makes every mile feel more intentional. L405 Vogue L494 Sport LR5 Discovery 5 2014–2022 Aluminium Alloy Silver & Black Direct Fit Interior Upgrade No Modification Pair Included Overview The Range Rover Vogue L405, Range Rover Sport L494, and Land Rover Discovery 5 are vehicles built around a coherent interior philosophy — premium materials, purposeful ergonomics, and a cabin that rewards close attention. Over time, however, the factory plastic armrest adjustment knobs can begin to feel inconsistent with that standard. Scratches, fading, and a hollow plastic feel are common complaints among owners who spend meaningful time behind the wheel. These adjustable armrest knobs are machined from high-grade aluminium alloy and designed to slot directly into the existing mounting points on all three platforms. Available in both Silver and Black anodised finishes, they complement a wide range of factory interior colour schemes — from Ebony to Light Oyster — without requiring any cutting, drilling, or permanent modification. The knob geometry mirrors the OEM form factor exactly, meaning adjustment action and range of travel remain identical to standard. It is the kind of upgrade that seasoned Land Rover owners appreciate most: invisible in its ambition, obvious in its execution. A component that simply feels right the moment you reach for it — solid, controlled, and quietly superior to what it replaces. What's Included 🔩 Armrest Adjustment Knobs × 2 One pair — driver and passenger side 📦 Protective Packaging Securely boxed to prevent transit damage 📋 Fitment Guide Basic installation reference included Product Highlights Machined from high-grade aluminium alloy for long-term durability Available in Silver and Black anodised finishes Direct OEM replacement — no modification required Maintains full factory armrest adjustment range of travel Significantly improved tactile feel over standard plastic knobs Resistant to fading, scratching, and daily wear Compatible with all trim levels across three platforms Sold as a pair — both driver and passenger side covered Lightweight construction — no impact on seat mechanism 100% brand new — not reconditioned or refurbished Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 2014–2022 Direct Fit Range Rover Sport L494 2014–2022 Direct Fit Land Rover Discovery 5 LR5 2017–2022 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 4 L319 2009–2016 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Beginner Ensure the seat is in a comfortable mid-position to provide clear access to the armrest assembly on both sides. Locate the existing factory plastic armrest adjustment knob on the outboard side of the seat base — it sits flush against the seat frame. Rotate the OEM knob anti-clockwise (or depress any retaining clip if present) to disengage it from the adjustment shaft. Align the new aluminium knob with the spline or flat-sided shaft and press firmly inward until it seats fully and clicks into position. Test the full adjustment range — tilt the armrest through its complete arc to confirm the knob engages cleanly at all positions. Repeat for the second seat. No tools are required in most fitments. ⚠ Note: Seat armrest designs can vary slightly across trim levels and model years within the same platform. If you are unsure of your specific seat variant, please contact our team on +44 203 943 9919 before fitting. Do not force the knob onto the shaft — correct engagement should require firm hand pressure only. Explore More for Your Vehicle 🔗 Discovery 5 LR5 Collection All accessories for 2017–2022 Discovery 5 🔗 Range Rover Vogue L405 Collection Interior & exterior for 2013–2020 Vogue 🔗 Range Rover Sport L494 Collection Curated upgrades for 2013–2020 Sport Built for Owners Who Notice the Details At Victorious Automotive, every product we stock is chosen because it genuinely improves the ownership experience. These armrest knobs are a simple, lasting upgrade for any L405, L494, or LR5 interior — and they arrive at your door anywhere in the world via DHL, FedEx, UPS, or TNT. Shop Discovery 5 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of compatibility identification.

Tipo de artículo: Conjunto de luz trasera Para marcas/modelos de vehículos: Land Rover Certificación de pruebas externas: CCC Tipo de material: ABS+PC Range Rover Sport-Año: 2015,2014 Modelo Land Rover: Range Rover Sport Voltaje: 12V Nombre de la marca: BPAPRZ Peso del artículo: 3 kg Esta es una pieza de repuesto de alta calidad 2018, unidad de luz trasera estilo Facelift para Range ROver Sport L494, PN es DERECHO LR099774, IZQUIERDO LR099777 Puede ser una pieza de luz trasera LED de repuesto para Range Rover Sport L494 (2018 en adelante), También puede ser una pieza mejorada Tuning para Range Rover Sport L494 (2014-2017), Ambos ajuste perfecto.

¡Presentamos los accesorios decorativos del anillo de perilla de aire acondicionado de Victorious Automotive! Este producto es 100% nuevo y está hecho de aleación de aluminio de alta calidad, lo que garantiza durabilidad y longevidad. Disponibles en plateado y rojo, estos elegantes anillos de perilla añaden un toque de elegancia a su Land Rover Range Rover Sport L461 2023 o Range Rover Vogue L460 2023. El paquete incluye tres piezas, lo que le permite personalizar todas las perillas del aire acondicionado de su vehículo. Estos anillos de perilla están diseñados para encajar perfectamente en las perillas existentes de su vehículo, lo que hace que la instalación sea rápida y sencilla. Estos anillos para perillas no solo mejoran el aspecto del interior de su vehículo, sino que también brindan un mejor agarre de las perillas, lo que las hace más fáciles de usar. Con su ajuste preciso y su construcción de alta calidad, estos anillos de perilla son el complemento perfecto para su Land Rover Range Rover Sport L461 2023 o Range Rover Vogue L460 2023. ¡Actualice el interior de su vehículo con los accesorios decorativos del anillo de perilla de aire acondicionado de Victorious Automotive hoy! Condición: 100% nuevo Material: hecho de aleación de aluminio de alta calidad. Color: plata/rojo El paquete incluye: 3 piezas Compatible: Para Land Rover Range Rover Sport 2023 Para Range Rover Vogue L460 2023.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Trim Air Conditioning Vent Decoration Cover for Toyota Land Cruiser 250 (2024–2025) A precision-fit AC vent trim overlay that elevates the interior finish of the LC250 — available in carbon fibre pattern and silver, with a no-drill paste installation that takes minutes. LC250 2024–2025 ABS Material Carbon Fibre Pattern Silver Finish Paste Fit Anti-Scratch Interior Trim Overview The Toyota Land Cruiser 250 represents a new chapter for one of the world's most respected off-road nameplates — combining rugged capability with a considerably more refined, technology-forward cabin. For owners who've invested in the LC250, the interior becomes a space worth perfecting, and it's often the smaller details that make the biggest impression. These AC vent decoration covers are designed specifically around the factory air outlet geometry of the 2024–2025 Land Cruiser 250. Manufactured from high-grade ABS with either a carbon fibre textured finish or a clean brushed silver option, each piece is modelled directly from OEM vent dimensions — meaning the fitment is tight, the alignment is precise, and the visual upgrade is immediately noticeable without looking aftermarket. The installation is entirely non-invasive, using a professional-grade adhesive paste method that leaves no marks and doesn't require any modification to the existing vent assembly. Airflow performance remains completely unaffected. Whether you're looking to match a wider interior styling theme or simply sharpen the factory look, these covers deliver exactly the right level of detail. What's Included 🌀 AC Vent Decoration Cover(s) Precision-fit overlay for LC250 factory air outlets 🧲 Pre-Applied Adhesive Factory-grade paste backing for secure fitment 📋 Installation Guide Step-by-step fitting reference included 📦 Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Engineered specifically for the Toyota Land Cruiser 250 (2024–2025) Available in carbon fibre texture pattern and silver finish High-grade ABS construction — rigid, lightweight, and durable OEM vent data used for precise dimensional accuracy Paste installation — no drilling, cutting, or tools required Does not obstruct or reduce airflow from factory outlets Scratch-resistant surface finish for lasting appearance Seamless integration with the LC250 factory dashboard aesthetic Residue-free removal if ever needed — vent stays undamaged Instantly elevates interior grade without permanent modification Compatibility Vehicle Generation / Code Year Range Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 / J300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 / J200 2007–2021 Not Compatible Toyota Land Cruiser Prado J150 2009–2024 Not Compatible Toyota Hilux Surf / 4Runner N210 / N280 Various Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 10–20 Minutes  |  🔧 Tools Required: None Ensure the AC vent surfaces are completely clean, dry, and free of any dust, grease, or silicone residue. A 70% isopropyl alcohol wipe is recommended for best adhesion. Test-fit each decoration cover over the corresponding vent without removing the adhesive backing — confirm alignment and seating before committing. Peel the protective film from the adhesive backing carefully, taking care not to touch the adhesive surface with bare fingers. Position the cover precisely over the vent opening and press firmly from the centre outward, applying sustained pressure for 30–60 seconds per piece. Allow a minimum of 24 hours for the adhesive to fully cure before operating the air conditioning at high fan speeds. ⚠ Note: Do not install on textured, dirty, or freshly-conditioned surfaces. Avoid applying in temperatures below 10°C (50°F) as this may reduce initial adhesive effectiveness. If your vehicle has recently been detailed with interior protectant products, ensure the vent area is thoroughly cleaned with IPA before fitting. Finishing Touches, Done Right Every detail inside your Land Cruiser 250 is a reflection of how you approach the vehicle. These vent covers are a small change with a noticeable result — and with worldwide shipping via DHL, FedEx, UPS, and TNT, yours can be on the way today. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Toyota Land Cruiser LC300 · Interior Trim Air Conditioning Vent Decoration Protective Stickers – Toyota Land Cruiser LC300 (2021–2024) A precision-cut interior upgrade that shields your LC300's air conditioning vents while delivering a distinctly refined finish — available in Carbon Fiber Pattern or Silver Matte. LC300 2021–2024 ABS Material Carbon Fiber Pattern Silver Matte Interior Trim No Drilling Required Direct Fit Overview The Toyota Land Cruiser LC300 is a vehicle that commands respect — a flagship SUV engineered to perform in the most demanding conditions while delivering a genuinely premium interior experience. Owners who've invested in the LC300 understand that every detail matters, and that the cabin should reflect the same standard of excellence as the mechanical platform beneath it. These Air Conditioning Vent Decoration Protective Stickers are precision-engineered to complement the LC300's interior architecture. Available in a bold Carbon Fiber Pattern or a clean Silver Matte finish, each sticker is formed from durable ABS material — resistant to heat, UV exposure, and the daily wear that standard plastic vent surrounds are susceptible to. The result is a cabin that looks sharper, feels more considered, and maintains that freshness long after leaving the showroom. Installation requires no modification, no drilling, and no specialist tools. The stickers bond cleanly via automotive-grade adhesive, sitting flush against the factory vent surrounds. Whether you're building a performance-focused interior or simply protecting your investment, these vent covers deliver a subtle but meaningful visual upgrade that LC300 enthusiasts will notice immediately. What's Included 🎛️ AC Vent Sticker Set 1 complete set covering all applicable vents 🔧 Pre-Applied Adhesive Automotive-grade bonding — clean and residue-free 📋 Installation Guide Step-by-step fitment instructions included 🧼 Cleaning Prep Pad Surface prep wipe for optimal adhesion Product Highlights Custom-designed specifically for the Toyota Land Cruiser LC300 (2021–2024) Available in Carbon Fiber Pattern for a sporty, textured appearance Silver Matte finish option for a refined, understated look Durable ABS construction — heat-resistant and UV-stable Protects factory vent surrounds from scratches and daily wear Automotive-grade adhesive backing for a clean, permanent bond No drilling, cutting, or specialist tools required for fitment Flush-fitting design that preserves factory airflow and vent operation Easy to clean — wipe down with a damp cloth or interior detailer Visually elevates the LC300 cabin without permanent modification Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser LC300 2021 Direct Fit Toyota Land Cruiser LC300 2022 Direct Fit Toyota Land Cruiser LC300 2023 Direct Fit Toyota Land Cruiser LC300 2024 Direct Fit Toyota Land Cruiser LC200 (200 Series) All Years Not Compatible Toyota Land Cruiser LC250 All Years Not Compatible Toyota Land Cruiser Prado J150 / J160 All Years Not Compatible Installation Notes Difficulty: Easy  |  Estimated Time: 20–30 Minutes  |  Tools Required: None Before beginning, ensure your LC300's interior is at ambient temperature. Avoid installation in direct sunlight or when the cabin is cold, as this can affect adhesive performance. Clean all air conditioning vent surround surfaces thoroughly using the included prep pad or an isopropyl alcohol wipe. Remove any dust, oils, or residue and allow to dry fully. Test-fit each sticker piece against its corresponding vent surround without removing the adhesive backing. Familiarise yourself with the alignment and orientation before committing. Carefully peel back the adhesive backing and position the sticker precisely over the vent surround, starting from one edge and pressing down gradually to avoid air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds. Pay particular attention to edges and corners to ensure full contact with the substrate. Allow the adhesive to cure for a minimum of 24 hours before cleaning the surface or exposing the trim to extreme temperature cycles. ⚠ Note: Confirm your exact model year and trim level before purchase. Interior vent configurations can vary between regional markets and specification grades. If you are unsure, contact us at +44 203 943 9919 and our team will be happy to assist. Complete Your LC300 Interior Explore the full range of Toyota Land Cruiser LC300 interior and exterior accessories — curated for owners who demand the same standard of finish inside their cabin as they expect from the road. Shop LC300 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Trim Air Conditioning Vent Trim Surround Covers — Toyota Land Cruiser 250 (2024) Precision-cut 304 stainless steel vent surrounds that bring a clean, refined finish to the LC250 cabin — available in black, silver, and carbon fibre pattern. LC250 2024 304 Stainless Steel Direct Fit No Drilling Adhesive Install 3 Finish Options Interior Trim Overview The 2024 Toyota Land Cruiser 250 arrives with a bold, adventure-ready character and a cabin that strikes a confident balance between utility and comfort. For enthusiasts who spend serious time in their LC250 — whether on-road or deep in the backcountry — the interior is where you live, and every detail matters. The factory air conditioning vent surrounds are functional, but they leave room for a level of refinement that matches the vehicle's premium positioning. These air conditioning vent trim surround covers are machined from 304-grade stainless steel and precision-formed to follow the exact geometry of the LC250's dashboard vents. Each piece sits flush against the factory panel, adding layered depth and a deliberately upscale finish to one of the most visible areas of the cabin. Choose from brushed silver for a clean, contemporary look, gloss black for a stealth aesthetic, or carbon fibre pattern for a motorsport-inspired edge. Installation is fully adhesive — there is no drilling, no permanent modification, and no need to disturb any factory trim. The covers bond firmly to the vent surround surface and, when applied correctly, sit seamlessly as though they were fitted at the factory. It is one of the fastest, highest-impact interior upgrades available for the Land Cruiser 250. What's Included 🟦 AC Vent Trim Surround Covers Full set — all vents covered, vehicle-specific fitment 🔧 Pre-Applied Adhesive Tape 3M-grade backing tape pre-fitted to each piece 🧹 Surface Prep Wipe Alcohol cleaning wipe for optimal adhesion 📋 Installation Guide Step-by-step instruction sheet included Product Highlights Precision-formed from 304-grade stainless steel for long-term durability Three finish options: brushed silver, gloss black, carbon fibre pattern Custom-designed specifically for the 2024 Toyota Land Cruiser 250 Flush fit — sits flat against the factory vent surround without gaps Fully adhesive installation — zero drilling, zero permanent modification Pre-applied 3M-grade backing tape for a clean and secure bond Corrosion-resistant finish — maintains appearance in varied climates Lightweight construction — no added weight or dashboard stress Reversible — can be removed cleanly without damaging factory trim Immediate cabin transformation with no specialist tools required Compatibility Vehicle Year Trim / Grade Compatibility Toyota Land Cruiser 250 2024 GX / VX / ZX / Sahara / First Edition Direct Fit Toyota Land Cruiser 300 2021–2024 All Grades Not Compatible Toyota Land Cruiser 200 2008–2021 All Grades Not Compatible Toyota Land Cruiser Prado 150 All Years All Grades Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Park the vehicle and ensure the cabin is at room temperature. Cold surfaces significantly reduce adhesive effectiveness. Use the included alcohol wipe to thoroughly clean each factory vent surround. Remove all dust, oils, and fingerprints. Allow to dry completely — approximately 60 seconds. Dry-fit each trim cover to confirm the correct piece for each vent position. The set is vehicle-specific, so each cover has a corresponding location. Peel the protective backing from the adhesive tape on the first cover. Align carefully — once the adhesive contacts the surface, repositioning is not recommended. Press firmly across the entire surface of each cover for 30–60 seconds, applying consistent pressure to ensure full tape contact. Repeat for all remaining vent covers. Allow the adhesive to cure for a minimum of 24 hours before operating the air conditioning at maximum force or exposing to extremes of temperature. ⚠ Important: Do not install in cold or damp conditions. The adhesive requires a clean, dry surface above 15°C (59°F) for a reliable bond. Failure to clean the surface beforehand is the primary cause of adhesive failure. Elevate Your LC250 Interior Small details define a great cabin. These vent trim covers are one of the quickest, cleanest upgrades you can make to the Land Cruiser 250 — and the result speaks for itself from the moment you sit down. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. Toyota and Land Cruiser are registered trademarks of Toyota Motor Corporation. Vehicle names and codes are referenced solely for fitment compatibility purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Stainless Steel Air Vent Cover for Toyota Land Cruiser 250 – 2024 A precision-cut stainless steel vent cover that overlays your LC250's factory air outlets — refining the interior atmosphere without any permanent modification. LC250 2024 Stainless Steel Black & Silver Adhesive Fit No Drilling Interior Trim Direct Fit Overview The 2024 Toyota Land Cruiser 250 represents a bold return to form — a capable, refined SUV that bridges traditional off-road pedigree with a genuinely upscale interior. Owners who care about that interior know that the details matter. The factory air vent surrounds are functional, but they leave room for a more distinguished finish. This stainless steel air vent cover is engineered specifically for the LC250's 2024 cabin geometry. It sits flush over the original vent housing with no gaps, no lifting edges, and no visual compromise. Available in polished silver and matte black, it introduces a jewellery-like quality to one of the most visible surfaces in the cabin — one you interact with every single drive. Installation takes minutes, not hours. A high-bond adhesive backing bonds cleanly to the factory trim surface, leaving no residue if ever removed. No tools, no panels to pull, no risk to your vehicle's warranty. This is the kind of upgrade that looks factory-fitted — because it was designed to be exactly that. What's Included 🔲 Stainless Steel Air Vent Cover 1 piece · pre-cut for LC250 2024 vent aperture 🔗 Pre-Applied Adhesive Tape High-bond 3M-grade backing · pre-fitted to cover 🧴 Cleaning Wipe Isopropyl prep wipe for surface preparation 📋 Installation Guide Step-by-step printed instruction sheet Product Highlights Precision-cut to match the exact vent profile of the 2024 LC250 Available in polished silver and gloss/matte black finishes High-grade stainless steel construction — resistant to warping and discolouration No drilling, cutting, or vehicle modification required High-bond adhesive backing ensures a secure, rattle-free fit Protects the factory vent surround from scratches and daily wear Slim low-profile design — does not interfere with airflow direction Heat and UV resistant — maintains finish in direct sunlight Residue-free removal if required — reversible upgrade Pairs well with other LC250 interior trim accessories in our collection Compatibility Vehicle Year Trim Level Fitment Toyota Land Cruiser 250 2024 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Variants Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Variants Not Compatible Toyota Land Cruiser Prado All Years All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Use the included isopropyl wipe to thoroughly clean the factory vent surround. Allow 2–3 minutes to dry completely before proceeding. Hold the vent cover against the factory surface to confirm alignment and fitment before removing the adhesive backing. Peel back the adhesive liner and carefully position the cover over the vent surround, starting from one edge and pressing progressively across the surface. Apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond fully. Allow 24 hours before exposing the vehicle to rain or car wash — this gives the adhesive time to cure to full strength. ⚠ Note: Ensure the factory trim surface is completely dry, grease-free, and at room temperature before installation. Applying to a cold or damp surface will reduce adhesive performance. Do not attempt installation immediately after the vehicle has been washed. Complete Your LC250 Interior Browse the full range of Toyota Land Cruiser 250 interior accessories at Victorious Automotive — precision-fitted trim upgrades built for owners who expect more from their cabin. Shop LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. Toyota and Land Cruiser are registered trademarks of Toyota Motor Corporation. All vehicle references are used solely for compatibility identification purposes.

Tapa de palanca de cambios Gamuza Alcantara Range Rover L460 Range Rover L461 2022-2023

Compatible con Range Rover Vogue 2013-2017, actualización a parrilla 2018. Cambie fácilmente la apariencia de su Range Rover Vogue con esta sencilla actualización.

Rejilla de radiador superior delantera ABS para Land Rover Range Rover Sport 2018 2019 accesorios de coche rejilla de estilo Características: Estricta prueba de control de calidad de fábrica, alta calidad garantizada. Le da a su vehículo un nuevo estilo y apariencia Acentúa el aspecto general de su vehículo Una gran mejora para su vehículo Proporciona un mejor flujo de aire al radiador para mejorar el proceso de enfriamiento Descripción: Condición: 100% nuevo Material: Hecho de alta calidad - No incluye insignia

Limpiador de llantas de aleación. Hace que la limpieza de tus llantas de aleación sea súper fácil y sin esfuerzo Tipo de artículo: Esponjas, paños y cepillos Tipo de material: plástico Ancho del artículo: 6,5 cm Peso del artículo: 50 g Longitud del artículo: 25 cm Características especiales: esponjas, paños y cepillos Altura del artículo: 3 cm Tipo: Esponjas, paños y cepillos ENVÍO AL MUNDO ENTERO PAGO SEGURO GARANTIZADO  

Nombre de la marca: metyoucar Origen: CN(Origen) Nombre del modelo: LLK1380 Certificación de pruebas externas: ISO9001 Altura del artículo: 10 cm Longitud del artículo: 30 cm Tipo de material: aleación de aluminio Tipo de artículo: Molduras interiores Peso del artículo: 300 g Ancho del artículo: 15 cm Año: 2011-2017 2 colores: plata. Rojo Montaje 1: Para BMW X3 2011-2017 Montaje 2: Para BMW X4 2014-2018 Montaje 3: Para BMW X5 2014-2018 Montaje 4: Para BMW X6 2015-2018 Montaje 5: Para BMW Serie 5 GT 2010-2017 Montaje 6: Para BMW Serie 5 2011-2017 Montaje 7: Para BMW Serie 6 2011-2017 Montaje 8: Para BMW Serie 7 2009-2014 Instalación: La parte trasera con cinta adhesiva para automóviles.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Aluminum A/C Control Knobs & Audio Trim Set — Land Rover Discovery 5 L462 (2017–2020) A precision-machined aluminum upgrade that transforms the Discovery 5's climate and audio controls into a tactile, premium focal point — without touching a single factory wire. Discovery 5 L462 2017–2020 Aluminum Direct Fit Interior Trim A/C Knobs Audio Trim No Drilling Overview The Land Rover Discovery 5 L462 is one of the most capable and refined family SUVs ever produced — an impressive balance of genuine off-road ability and sophisticated interior living. For owners who appreciate both, the centre console and climate zone is one area where the factory finish, while functional, leaves something to be desired. Plastic knobs and audio surrounds simply don't reflect the character of a vehicle at this level. This aluminum A/C control knob and audio trim set is engineered specifically for the 2017–2020 Discovery 5 L462. Each piece is precision-machined from high-grade aluminum, anodised for lasting resistance to wear, and designed to drop onto the existing factory fittings without any modification or drilling. The result is a tactile, premium feel every time you reach for the temperature dial or adjust your audio settings. Available in multiple finishes to complement both light and dark interior colour schemes, this set is a considered upgrade rather than an afterthought — the kind of detail that Discovery 5 enthusiasts who know their vehicle will immediately notice and appreciate. What's Included ❄️ A/C Control Knobs Full set of aluminum climate control knobs, direct-fit replacements for OEM plastic units 🔊 Audio Circle Trim Ring Aluminum surround trim for the audio control area, seamlessly integrated with factory fitments 🔧 Fitting Hardware All necessary clips and adhesive elements included for a clean, rattle-free installation 📋 Installation Guide Step-by-step instructions included for a straightforward, tool-minimal fit at home Product Highlights Precision-machined from high-grade aluminum for a genuinely premium feel Anodised finish resists scratching, fading, and daily wear over time Designed as exact-fit replacements for factory Discovery 5 L462 knobs No drilling, cutting, or wiring required — a true direct-fit upgrade Multiple colour finishes available to suit your interior specification Adds significant tactile quality to frequently used cabin controls Compatible with all trim levels of the 2017–2020 Discovery 5 L462 Lightweight construction — zero impact on vehicle balance or function Retains full OEM climate and audio control functionality throughout Consistent finish across the knob set and audio trim for a unified look Compatibility Vehicle Code Years Fit Land Rover Discovery 5 SE L462 2017–2020 Direct Fit Land Rover Discovery 5 HSE L462 2017–2020 Direct Fit Land Rover Discovery 5 HSE Luxury L462 2017–2020 Direct Fit Land Rover Discovery 5 First Edition L462 2017–2020 Direct Fit Land Rover Discovery 5 (2021+) L462 Facelift 2021–Present Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 minutes  ·  Tools Required: Trim removal tool (optional) Ensure the vehicle is switched off and the interior is at a comfortable working temperature before beginning. Carefully pull the existing plastic A/C knobs directly away from the spindles — they are friction-fitted and require no tools to remove. Clean the exposed spindles and surrounding dashboard surface with a dry microfibre cloth to remove any dust or residue. Align the new aluminum A/C knobs with the corresponding spindles and press firmly until each clicks securely into place. For the audio trim ring, use the supplied adhesive or clips (depending on your kit variant) to position the trim precisely over the factory surround. Apply firm, even pressure across the trim ring for 30–60 seconds to ensure a secure bond with no gaps around the edges. Test all climate and audio controls for smooth, unobstructed operation before considering the installation complete. ⚠ Note: Confirm your Discovery 5's model year and dash configuration against the product listing before purchasing. Interior console layouts can vary between early and late L462 production runs. If in any doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility before you order. Elevate Your Discovery 5 Interior Browse our full range of Discovery 5 L462 interior upgrades — from trim sets and pedal covers to carbon fibre dash inserts and ambient lighting kits. Every product is hand-picked for fitment accuracy and finish quality. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Defender 110 · Interior Trim Aluminum Air Conditioning Control Outlet Frame Trim for Land Rover Defender 110 Precision-engineered aluminum trim that elevates your Defender's interior climate control with premium aesthetics and lasting durability. Defender 110 2008–2018 Aluminum Alloy AC Outlet Trim 5 Colors Double-Sided Adhesive Overview The Defender 110 is built for purpose, but that doesn't mean you can't refine its cabin. This aluminum air conditioning control outlet frame trim is engineered to sit perfectly within your dashboard's climate control surround, transforming a functional component into a design statement. Machined from high-grade aluminum alloy and finished in your choice of five contemporary colors—Matte Black, Red, Blue, Silver, and Green—this trim combines durability with personalization. The precision-fit design means no guesswork; it sits flush with your vehicle's geometry, eliminating gaps and creating a seamless integration that looks factory-intended. Installation takes minutes thanks to the pre-applied double-sided adhesive backing. Simply clean the existing surface, position the trim, and apply firm pressure. The result is a modern, cohesive interior that reflects your attention to detail. What's Included 📦 Aluminum Outlet Frame Precision-cut trim piece ✓ Double-Sided Adhesive Pre-applied, ready to install 📋 Installation Guide Simple step-by-step instructions Product Highlights High-grade aluminum alloy construction for exceptional durability and corrosion resistance Available in Matte Black, Red, Blue, Silver, and Green finishes Precision-engineered fit for Defender 110 models 2008–2018 Pre-applied double-sided adhesive for tool-free installation 100% brand new, manufactured to ISO9001 standards Lightweight design adds zero weight penalty to your vehicle Seamless integration with original dashboard geometry Easy to clean and maintain; resists fingerprints and dust Perfect for subtle interior customization without permanent modifications Enhanced cabin aesthetics that complement any interior trim style Compatibility Model Year Range Status Land Rover Defender 110 2008–2018 Direct Fit Land Rover Defender 90 2008–2018 Not Compatible Land Rover Defender 130 2008–2018 Not Compatible Range Rover Sport (L320) 2005–2013 Not Compatible Installation Difficulty: Beginner | Time: 5 Minutes Clean the air conditioning outlet frame area with a dry, lint-free cloth to remove any dust or residue. Carefully peel back the protective backing from the double-sided adhesive on the aluminum trim. Align the trim piece with the AC outlet opening, ensuring it sits symmetrically within the surround. Press firmly across the entire surface for 10–15 seconds to ensure full adhesion. Allow 24 hours for the adhesive to cure fully before operating the air conditioning system. Note: Ensure the dashboard surface is clean and dry before installation. Do not install in temperatures below 10°C, as adhesive performance may be compromised. Elevate Your Defender's Interior Today Premium aluminum trim at an uncompromising price. This is how you personalize a Defender without compromise—precision, durability, and style in one elegant package. Shop Defender 110 Trim 30-Day Money-Back Guarantee 4.9/5 Verified Reviews (12,300+) Worldwide Shipping Use code 22GET20 for 20% off any 2 items. Questions? Call us at +44 203 943 9919 (Mon–Fri 9am–7pm). Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or any OEM manufacturer. All trademarks and brand names referenced are the property of their respective owners. This product is an aftermarket accessory designed for fitment and compatibility; it is not an official Land Rover product.

Victorious · Defender 90/110/130 · Interior Trim Aluminum Alloy A-Pillar Expansion Base Decorative Strip – Defender 90/110/130 Premium aluminum trim that refines your Defender's interior architecture with precision engineering and lasting durability. Defender 90 Defender 110 Defender 130 2004–2018 Aluminum Alloy Black Finish Pair Overview The Land Rover Defender 90, 110, and 130 have always demanded authentic, quality upgrades that respect their utilitarian heritage while enhancing modern comfort. These aluminum alloy A-pillar expansion base decorative strips do exactly that—they're engineered to integrate seamlessly with your cabin architecture, adding visual refinement without compromise. Crafted from high-grade aluminum alloy with a sleek black finish, these strips frame the A-pillar junction with precision. Whether you're upgrading a working Defender or a cherished personal build, they catch light beautifully and create a cohesive interior narrative that bridges classic and contemporary design. ISO9001 certified manufacturing ensures consistency and longevity. Installation is straightforward, and the pair of strips coordinates perfectly across both sides of your windscreen frame. This is the kind of detail that serious Defender owners notice—and appreciate. What's Included ✓ A-Pillar Decorative Strips × 2 Left and right trim pieces 📦 Secure Packaging DHL, FedEx, UPS, TNT worldwide 🔧 Installation Guide Step-by-step instructions included ✨ Premium Finish Black aluminum, ready to install Product Highlights High-grade aluminum alloy construction for superior durability Sleek black finish complements all interior trim schemes ISO9001 certified manufacturing quality Pair design covers both A-pillar sides symmetrically Precision-fit for 2004–2018 Defender models Lightweight yet robust material Weather-resistant and UV-stable finish Professional appearance with minimal assembly required Enhances cabin visual architecture and cohesion Cost-effective interior refinement upgrade Compatibility Model Years Fit Defender 90 2004–2018 Direct Fit Defender 110 2004–2018 Direct Fit Defender 130 2004–2018 Direct Fit Defender 110 (2020+) 2020–Present Not Compatible Defender 90 (2020+) 2020–Present Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Remove the driver and passenger A-pillar trim panels (if present) by gently prying with a plastic trim tool. Position the left-hand decorative strip against the A-pillar base, ensuring even alignment with the expansion panel above. Secure using the provided adhesive backing or fasteners (per included instructions), applying firm pressure for 10–15 seconds. Repeat for the right-hand side, ensuring symmetry and flush fitment. Allow adhesive to cure for 2–4 hours before closing cabin trim or driving. Note: If your Defender has factory A-pillar finishes, test fit first to confirm clearance. Consult the full installation guide if you are unfamiliar with interior trim removal. Ready to Refine Your Defender? These aluminum A-pillar strips are a small detail that creates measurable impact. Add them to your cabin build and experience how thoughtful material choices elevate every journey. Shop Defender Interior Upgrades Use code 22GET20 for 20% off any 2 items. 4.9/5 · 12,300+ verified reviews 30-day money-back guarantee +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All product names, logos, and vehicle designations are the property of their respective owners. This product is an aftermarket accessory designed for fitment to these vehicles.

Victorious · Defender 90/110/130 · Interior Trim Aluminum Alloy A-Pillar Grab Handle Trim for Land Rover Defender 90/110/130 Precision-engineered aluminum trim that transforms your Defender's interior with understated luxury and superior grip ergonomics. Defender 90/110/130 2004–2018 Aluminum Alloy Interior Upgrade Direct Fit Overview The Land Rover Defender 90, 110, and 130 (2004–2018) are built for serious expedition work, but that doesn't mean your interior should feel unfinished. This aluminum alloy A-pillar grab handle trim kit elevates the cabin aesthetic while maintaining the raw, purposeful character that defines Defender ownership. Whether you're navigating tight urban streets or tackling rough terrain, these handles deliver both tactile comfort and visual refinement. Constructed from premium-grade aluminum alloy, this trim pair provides a secure grip point for driver and passenger entry/exit while adding a professional, bespoke finish to your A-pillars. The material resists corrosion, UV fading, and daily wear—essential qualities for a vehicle that lives outdoors. Available in three finishes—silver, red, and black—so you can match your Defender's personality and interior color scheme. Installation is straightforward: simple screw fixation means no drilling, no modification to your vehicle's structure, and zero risk of damage. Remove in minutes if needed. This is the kind of upgrade that makes your Defender feel more refined without compromising its authentic character. What's Included 📦 2 × A-Pillar Grab Handle Trims Left and right hand for complete coverage 🔧 Stainless Steel Fixings Grade A screws, corrosion-resistant 📋 Installation Guide Step-by-step instructions included ✓ 30-Day Satisfaction Guarantee Full refund if not delighted Product Highlights Premium aluminum alloy construction—lightweight, durable, corrosion-resistant Available in silver, red, and black finishes to suit any interior scheme Ergonomic grip profile improves entry/exit comfort and safety Simple screw fixation—no drilling, no permanent modification required Perfect fit for Defender 90, 110, and 130 (2004–2018 models) UV and fade-resistant finish maintains appearance in sun and salt environments Professional bespoke appearance elevates cabin aesthetics instantly Fits seamlessly with factory A-pillar geometry—no trimming or adaptation needed Removable without trace if you ever wish to restore original trim Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Model Model Years Compatibility Land Rover Defender 90 2004–2018 Direct Fit Land Rover Defender 110 2004–2018 Direct Fit Land Rover Defender 130 2004–2018 Direct Fit Defender L663 (2020+) 2020–2026 Not Compatible Range Rover Sport / Evoque All years Not Compatible Installation Notes Difficulty Level: Beginner | Time Required: 15–20 minutes Prepare: Open driver and passenger doors fully. Locate existing A-pillar trim area where grab handles will mount. Clean surface with dry cloth to remove dust and debris. Position: Hold one trim piece against the A-pillar at your preferred height. Mark screw hole locations lightly with pencil. Ensure vertical alignment—use a spirit level if needed. Drill (if required): If mounting holes are not pre-drilled, use a 5mm drill bit to create pilot holes. Do not over-drill; keep holes clean and free of debris. Attach: Insert stainless steel screws through the trim piece and into pilot holes. Tighten firmly but do not over-torque—this can crack aluminum. Repeat: Follow steps 1–4 for the opposite A-pillar trim piece. Ensure both handles sit at the same height and are equally secure. Inspect: Gently pull on each handle to confirm it does not shift or rattle. Test entry/exit comfort and grip feel. ⚠ Warning: Do not install on vehicles with cracked or heavily damaged A-pillars. Ensure your Defender's structural integrity is sound before fitting any trim. If unsure, consult a Land Rover specialist. Ready to Elevate Your Defender? Your Defender deserves interior details that match its capability and character. These aluminum A-pillar grabs add comfort, style, and that finishing touch that separates a well-maintained Defender from an exceptional one. Order now and transform your cabin. Shop Defender Interior Upgrades Use code 22GET20 for 20% off any 2 items. 4.9/5 stars — 12,300+ verified reviews 30-day guarantee — Full refund, no questions Worldwide shipping — DHL, FedEx, UPS, TNT Expert support — +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover entity. All vehicle names and model references are used for compatibility description only.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Aluminum Alloy A/C & Volume Knob Ring Cover Trim — Land Rover Discovery 5 (2021–2024) A precision-machined aluminum alloy upgrade that refines every interaction with your Discovery 5's climate and audio controls — replacing plastic with polished metal. Discovery 5 L462 2021–2024 Aluminum Alloy Silver Finish A/C Knob Trim Volume Ring Cover No-Drill Install Interior Upgrade Overview The Land Rover Discovery 5 is engineered for those who refuse to compromise — a vehicle that balances genuine off-road capability with a cabin environment that rivals the best executive SUVs on the market. From the sweeping dashboard architecture to the layered material palette, every surface inside the D5 has a considered presence. It's a space that rewards thoughtful upgrades, and the climate and audio controls are among the most-touched points in the interior. These Aluminum Alloy A/C and Volume Knob Ring Cover Trims are designed specifically for the 2021–2024 Discovery 5 facelift interior, slipping over the existing plastic surround rings with a precision-cut profile that follows every contour. The brushed and anodised silver aluminium finish introduces a tactile quality to the console that the factory trim simply doesn't offer — cooler to the touch, more substantial in appearance, and genuinely premium in feel. Installation requires no tools, no drilling, and no modification to the vehicle. The adhesive-backed fitment bonds securely to the factory knob surround, transforming the look of the centre console in under ten minutes. Whether you're building out a full interior refresh or simply want one focused, high-quality detail piece, these trims deliver a result that looks and feels factory-fitted. What's Included 🔘 A/C Knob Ring Cover × 1 Aluminium alloy, adhesive-backed, silver finish 🔘 Volume Knob Ring Cover × 1 Matching aluminium alloy, silver finish 🧽 Pre-Application Wipe For surface prep before adhesive bonding 📄 Fitment Guide Step-by-step installation instructions included Product Highlights Precision-cut to match the exact knob surround profile of the 2021–2024 Discovery 5 Premium aluminum alloy construction — significantly more robust than OEM plastic surround Brushed silver finish complements chrome, piano black, and ebony interior trims Adhesive-backed fitment — no drilling, no tools, no vehicle modification required Cooler, more tactile surface adds a genuine premium feel every time you adjust the controls Resistant to fading, discolouration, and heat from direct sunlight exposure Lightweight alloy adds no perceptible weight or bulk to the control knobs Clean, minimal design that reads as factory-fitted rather than aftermarket Reversible installation — can be removed without marking the factory surface Paired set ensures a consistent, uniform finish across both knob positions Compatibility Vehicle Model Code Years Fit Land Rover Discovery 5 L462 Facelift 2021 – 2024 Direct Fit Land Rover Discovery 5 L462 Pre-Facelift 2017 – 2020 Verify Before Order Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery Sport L550 2015 – 2024 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None With the vehicle off and the interior at room temperature, identify the A/C and volume knob surrounds on the centre console of your Discovery 5. Use the included pre-application wipe (or an isopropyl alcohol wipe) to thoroughly clean the plastic surround surface, removing any dust, oils, or polish residue. Allow the surface to dry completely for 2–3 minutes before proceeding — adhesion quality depends on a clean, dry contact area. Carefully peel the protective backing from the adhesive pad on the rear of the knob ring cover, taking care not to contaminate the adhesive with fingerprints. Align the trim ring carefully over the knob surround, ensuring the profile sits flush before making contact — repositioning after adhesive contact is not recommended. Press firmly and evenly around the entire circumference of the ring for 30–60 seconds to ensure a full and secure bond. Repeat for the second knob ring cover. Allow 1–2 hours before normal use for the adhesive to fully cure. ⚠ Note: Ensure the interior temperature is above 10°C during application — cold surfaces reduce initial adhesive bond strength. Do not apply immediately after cleaning with silicone-based products. For European orders over €150 in declared value, import duties may apply and are the responsibility of the buyer. Built for Discovery 5 Owners Who Notice the Details Browse the full range of interior and exterior upgrades curated specifically for the Land Rover Discovery 5 — every piece selected to complement rather than compromise the vehicle's character. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Defender 90/110/130 · Interior Trim Aluminum Alloy Air Conditioner Volume Knob Cover Trim for Defender 90/110/130 Premium aluminum trim that transforms your Defender's climate control with sleek, durable styling—tool-free installation. Defender 90/110/130 2004–2018 Aluminum Alloy AC Knob Trim Interior Upgrade Plug & Play Overview The Defender 90, 110, and 130 are icons of expedition and durability—but their interiors deserve upgrades that match their capability. This Aluminum Alloy Air Conditioner Volume Knob Cover Trim elevates your cabin's aesthetic with a refined, modern finish that speaks to detail-conscious owners who won't compromise on quality. Hand-crafted from premium aluminum alloy, this trim piece wraps your climate control knob in brushed black finish, creating a cohesive, premium look that complements both classic and modernized Defender cabins. The design is understated but unmistakable—exactly what Defender purists expect. Installation is effortless: double-sided adhesive backing means no drilling, cutting, or modification. Fits all models 2004–2018. This is the kind of detail that separates a truck you drive from a truck you're proud of. What's Included 🎚️ AC Knob Cover Trim Aluminum alloy, black finish, ready to install ✨ Adhesive Backing Pre-applied double-sided tape for instant fit Product Highlights Premium Aluminum Alloy construction resists corrosion and wear Sleek black finish matches modern and classic Defender interiors Double-sided adhesive backing—no tools, fasteners, or modifications needed Precision-fit design for Defender 90, 110, and 130 (2004–2018) Lightweight yet durable—built to last through decades of use Complements other interior trim upgrades and factory options Temperature-stable adhesive holds through extreme cabin heat and cold Non-intrusive design preserves original air conditioning function Enhances perceived cabin quality with minimal investment Easy removal without residue if needed—adhesive is clean and reversible Compatibility Model Generation Year Range Status Defender 90 TDi & Td5 2004–2016 Direct Fit Defender 110 TDi & Td5 2004–2016 Direct Fit Defender 130 TDi & Td5 2004–2016 Direct Fit Defender 90 PUMA 2017–2018 Direct Fit Defender 110 PUMA 2017–2018 Direct Fit Installation Difficulty: Beginner | Time: 5 minutes Turn off the engine and allow the cabin to cool to room temperature for optimal adhesive bonding. Locate the air conditioning volume control knob on your Defender's dashboard. Clean the knob surface with a dry, lint-free cloth to remove dust and oils. Remove the backing from the adhesive strip on the aluminum trim piece. Align the trim with the knob and press firmly for 15–20 seconds, working from center outward to eliminate air bubbles. Allow adhesive to cure for 2–4 hours before operating the climate control system. Tip: If the knob has a glossy finish, lightly roughen with fine sandpaper (320–400 grit) before installation to improve adhesive grip. Clean thoroughly after sanding. Complete Your Defender's Interior Premium details define the difference between a vehicle and a statement. This aluminum trim is the first step toward a cabin that reflects your standards. Add to Cart Use code 22GET20 for 20% off when you order 2+ interior upgrades. ✓ 4.9/5 stars • 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support • +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any original equipment manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. Product fitment is based on manufacturer specifications and customer feedback.

Nombre del modelo: LLK296 Certificación de pruebas externas: ISO9001 Altura del artículo: 5 cm Longitud del artículo: 10 cm Tipo de material: aleación de aluminio Tipo de artículo: Molduras interiores Peso del artículo: 100 g Ancho del artículo: 10 cm Año: 2014-2018 Color: azul, plata, rojo Montaje: Para BMW 1 2 3 4 Serie F30 F34 F46 GT X1 F48 13-17

Victorious Automotive · Land Rover Discovery 5 & Range Rover Vogue · Interior Trim Aluminum Alloy B-Pillar Clothes Hook Cover for Land Rover Range Rover Vogue, Discovery Sport & Discovery 5 (2015–2023) A precision-machined aluminum alloy B-pillar clothes hook trim that elevates your Land Rover's interior finish with a polished silver aesthetic and effortless, tool-free installation. Discovery 5 L462 Range Rover Vogue L405 Discovery Sport L550 2015–2023 Aluminum Alloy Polished Silver B-Pillar Trim Direct Fit No Drilling Required Interior Upgrade Overview The Range Rover Vogue L405, Land Rover Discovery 5, and Discovery Sport represent the pinnacle of British SUV engineering — commanding interiors that blend premium materials with purposeful design. Every detail inside these cabins is noticed by the owners who choose them, which makes even the smallest trim piece an opportunity to reinforce or undermine that sense of quality. This aluminum alloy B-pillar clothes hook cover is designed specifically for 2015–2023 model years across all three platforms. Replacing the factory plastic hook surround with a machined aluminium unit, it delivers a noticeably more premium look and feel — one that sits naturally alongside the brushed metal accents already present in these interiors. The polished silver finish is consistent and well-controlled, avoiding the over-polished, aftermarket look that cheaper alternatives often carry. Beyond aesthetics, the cover retains the full functionality of the original clothes hook while adding a tactile rigidity that the stock plastic simply cannot match. It installs without tools, adhering to the original mounting points for a flush, factory-correct finish that requires no modification to your vehicle whatsoever. What's Included 🔩 Aluminum Alloy B-Pillar Hook Cover × 2 Left and right covers supplied as a pair for a matched finish 📋 Installation Guide Step-by-step fitting reference included in packaging Product Highlights CNC-machined aluminum alloy construction for long-term structural rigidity and premium feel Polished silver finish blends naturally with factory brushed metal and chrome interior accents Precision-engineered to fit directly over existing B-pillar hook mounting points — no cutting or drilling Supplied as a matching pair to ensure visual symmetry across both rear door pillars Retains full use of the original clothes hook functionality beneath the cover Significantly more durable than the factory plastic surround — resists cracking and surface wear Compatible across three distinct Land Rover platforms sharing the same hook architecture Tool-free installation completed in minutes with no risk of damage to trim panels Low-profile design maintains the clean, uncluttered look of the original interior Covered by Victorious Automotive's 30-day money-back guarantee for total peace of mind Compatibility Vehicle Code Years Fit Range Rover Vogue L405 2015–2021 Direct Fit Land Rover Discovery 5 L462 2017–2023 Direct Fit Land Rover Discovery Sport L550 2015–2023 Direct Fit Range Rover Vogue L460 2022–2026 Verify Before Purchase Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Open both rear doors to gain clear, unobstructed access to the B-pillar on each side of the vehicle. Inspect the existing factory plastic clothes hook surround on each pillar. Clean the surface with a dry microfibre cloth to remove any dust or residue that may affect fitment. Align the aluminum alloy cover over the existing hook and mounting point. The cover is designed to clip or press directly over the original unit without modification. Apply firm, even pressure until the cover sits fully flush against the B-pillar panel. You should feel and hear a positive engagement with the mounting points. Repeat the process on the opposite B-pillar using the second cover from the pair. Confirm both covers are symmetrical and flush. Test the clothes hook functionality to ensure full operation is retained beneath the new cover. ⚠ Note: Do not force the cover into position. If resistance is felt, re-check alignment before applying further pressure. Forcing a misaligned cover may result in stress marks on the surrounding trim panel. If you are unsure at any stage, contact our team on +44 203 943 9919 before proceeding. Browse Compatible Collections Looking for more interior upgrades for your Land Rover? Explore our dedicated collections below: 🔗 Land Rover Discovery 5 L462 · 2017–2023 🔗 Land Rover Discovery Sport L550 · 2015–2023 🔗 Range Rover Vogue L405 L405 · 2013–2021 Refined Detail. Lasting Impression. The B-pillar is one of the most handled surfaces in your Land Rover's cabin. Make it count. This aluminum alloy upgrade is one of the simplest, most satisfying interior refinements you can make — and it's backed by our 30-day money-back guarantee. Shop Discovery 5 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery 4 · Interior Storage Aluminum Alloy Black Glove Box Storage Organizer for Land Rover Discovery 4 (2010–2016) A precision-fitted glove box partition that brings genuine order to your Discovery 4's passenger compartment — without cutting corners on finish or fit. Discovery 4 · L319 2010–2016 Aluminum Alloy Gloss Black Glove Box Organizer No-Drill Install Interior Storage Direct Fit Overview The Land Rover Discovery 4 is a vehicle built for serious owners — those who travel far, carry a lot, and expect everything to be exactly where they left it. The factory glove box, while adequately sized, offers little in the way of internal structure. Over time, documents, tools, and everyday essentials become a jumbled mess that undermines the composed, premium feel the Discovery 4 deserves. This Aluminum Alloy Glove Box Storage Organizer is engineered specifically for the 2010–2016 Discovery 4 (L319) and drops cleanly into the existing glove box cavity without any modification to the vehicle. The partition divides the available space into clearly defined zones, keeping your cabin essentials separated, accessible, and properly secured — whether you're navigating city streets or heading into more demanding terrain. Crafted from high-grade aluminum alloy and finished in a sleek matte black, this organizer blends naturally with the Discovery 4's interior trim rather than looking like an afterthought. It installs in minutes using the included double-sided adhesive, leaving no marks, no residue, and no regrets. A small upgrade that makes a meaningful difference every single day you open that glove box. What's Included 🗂️ Glove Box Storage Partition Aluminum alloy, matte black finish — qty: 1 🔲 Double-Sided Adhesive Strips Pre-applied for clean, residue-free fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-designed exclusively for the Discovery 4 (L319) 2010–2016 glove box cavity Premium aluminum alloy construction — rigid, lightweight, and corrosion resistant Matte black finish complements the Discovery 4's factory interior trim Divides glove box space into multiple functional storage zones Tool-free, no-drill installation using pre-applied double-sided adhesive Keeps documents, cards, tools, and accessories neatly separated and accessible Slim-profile design retains maximum usable storage volume in the glove box Manufactured in an ISO 9001-certified facility for consistent quality assurance Easy to remove and reposition without leaving marks on factory surfaces Ideal companion upgrade alongside other Discovery 4 interior accessories Compatibility Vehicle Model Code Year Range Trim / Grade Fitment Land Rover Discovery 4 L319 2010–2016 S / SE / HSE / HSE Luxury Direct Fit Land Rover Discovery 4 L319 2009 (Pre-facelift) All Trims Verify First Land Rover Discovery 3 L319 2004–2009 All Trims Not Compatible Land Rover Discovery 5 L462 2017–2024 All Trims Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Installation Notes 🛠️ Difficulty: Easy  ·  ⏱️ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Open the glove box fully and remove any existing contents to give yourself a clear working surface. Wipe the interior base of the glove box thoroughly with a clean, dry microfibre cloth to remove any dust, oils, or debris — this ensures a strong adhesive bond. Peel back the protective liner from the pre-applied double-sided adhesive strips on the underside of the partition. Lower the partition into the glove box, aligning it with the intended divider position. Press down firmly and hold for 20–30 seconds to activate the adhesive. Allow a minimum of 1 hour before placing any heavy items against the partition to allow the adhesive to fully cure. Close the glove box and confirm the lid closes without obstruction. Your storage organizer is now ready to use. ⚠ Important: Ensure the glove box surface is completely dry and free of any cleaning product residue before applying the adhesive. Fitting in temperatures below 10°C (50°F) may reduce adhesive performance — allow the vehicle to warm up to room temperature first if working in cold conditions. Elevate Your Discovery 4 Interior This is the kind of detail that Discovery 4 owners notice every single day. Small, purposeful, and built to last — exactly what your vehicle deserves. Browse the full Discovery 4 interior collection at Victorious Automotive. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Land Rover Discovery LR3 & LR4 · Exterior Accessories Aluminum Alloy Black Rear Side Roof Ladder — Land Rover Discovery LR3 & LR4 (2004–2016) Gain confident, safe roof access on your Discovery with a precision-formed aluminium alloy ladder finished in stealth black — built to complement the LR3 and LR4's rugged character. LR3 · LR4 2004–2016 Aluminium Alloy Matte Black Finish Rear Side Mounting Roof Access Direct Fit Brand New Overview The Land Rover Discovery LR3 and LR4 occupy a unique space in the 4x4 world — genuinely capable off-road, yet composed enough for everyday use. Owners of these vehicles tend to use them hard: roof tents, expedition racks, rooftop cargo systems, and overland gear all demand reliable, safe roof access. A proper ladder isn't a luxury — it's a necessity. This rear side roof ladder has been designed specifically for the Discovery LR3 (2004–2009) and LR4 (2009–2016) body structure. Constructed from high-grade aluminium alloy, it delivers the rigidity needed for frequent use without adding unnecessary weight to your build. The satin black finish ties seamlessly into the Discovery's exterior trim lines, giving it a purposeful, integrated appearance rather than an afterthought. Whether you're accessing a rooftop tent at camp, loading equipment onto a roof rack, or simply checking your load mid-journey, this ladder makes roof access safe, efficient, and repeatable. It's the kind of addition that earns its keep on every outing — functional enough for the trail, refined enough for the daily drive. What's Included 🪜 Rear Side Roof Ladder 1x aluminium alloy ladder unit, matte black finish 🔧 Mounting Hardware Adhesive and fixings included for secure installation 📄 Installation Guide Step-by-step fitment instructions Product Highlights Precision-engineered aluminium alloy construction — lightweight yet load-bearing Matte black finish resists corrosion and complements Discovery exterior trim Designed specifically for LR3 and LR4 body profiles — no cutting or modification required Robust step rungs for confident footing during roof access Adhesive-assisted mounting for a clean, rattle-free installation Does not interfere with existing roof rack or rail systems UV-stable finish — will not fade or chalk under prolonged sun exposure Low-profile design maintains vehicle aerodynamics and road presence 100% brand new — not a refurbished or reconditioned part Suitable for expedition builds, rooftop tents, and overland setups Compatibility Vehicle Code Years Fitment Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Land Rover Defender L663 2020–Present Not Compatible Installation Notes 🛠 Difficulty: Easy · Estimated Time: 30–45 Minutes · No Professional Fitting Required Thoroughly clean the mounting area on the rear side panel and lower roof edge of the Discovery using an isopropyl alcohol wipe. Allow to dry completely before proceeding. Dry-fit the ladder against the vehicle body to confirm alignment and positioning. Mark the intended placement lightly if needed before committing. Apply the included double-sided adhesive strips to the ladder's mounting points as directed, ensuring full contact coverage across each pad. Press the ladder firmly into position and hold with consistent pressure for 60 seconds per contact point to initiate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before placing any load or weight on the ladder. Avoid washing the vehicle during this period. Once cured, perform a gentle pull test on each mounting point to confirm the bond is secure before use. ⚠ Note: Surface temperature affects adhesive performance. Do not fit in direct sunlight, in temperatures below 10°C, or on wet bodywork. Always allow full cure time before use. If your Discovery has aftermarket body cladding or non-standard paint, test adhesion in a discreet area first. Built for Discovery Owners Who Actually Use Their Vehicle Every part we stock at Victorious Automotive is chosen with one question in mind: would we fit it to our own vehicle? This ladder earns a confident yes — practical, clean, and properly engineered for the LR3 and LR4. Shop All Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All brand names, vehicle names, and model codes referenced are used for compatibility identification purposes only. Always verify fitment with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Range Rover Velar y Evoque Mandos del aire acondicionado y control de volumen Artículo: perillas de volumen del aire acondicionado Material: aleación de aluminio Color: azul, rojo y plateado. Apto para Range Rover Velar 2017 2018 2019. Para Range Rover Evoque 2019 2020. Fácil de instalar. Póngalo directamente. El paquete incluye: 3 uds.