Victorious Automotive · Defender L663 · Exterior Lighting
LED Fog Lights Kit with Daytime Running Lights & Wiring Harness — Land Rover Defender L663 2020–2022
Sharper front-end presence and all-weather visibility in a single direct-fit LED upgrade, purpose-built for the L663 Defender's bumper architecture.
Defender L663
2020 · 2021 · 2022
LED Fog Lights
Daytime Running Lights
ABS Lens Housing
12V System
Includes Harness
Front Fitment
Overview
The Land Rover Defender L663 is a vehicle defined by intention — every panel, every surface angle, every light cluster carries visual weight. If you're running the 2020–2022 model and the stock front-end foglights feel like an afterthought, this LED kit exists to correct that. Engineered to slot directly into the lower front bumper apertures of the L663, these lights deliver a crisper, more purposeful look that brings the Defender's face in line with its character.
This kit combines high-output LED fog lamps with integrated daytime running light functionality, giving you two roles from a single unit. The LED array operates on the standard 12V system and draws significantly less current than conventional halogen fog units — meaning less load on the alternator and a longer service life without any sacrifice in forward light output. The ABS plastic lens housing is impact-resistant, well-suited to the debris and weather the Defender routinely encounters.
The complete wiring harness is included, removing the need to source third-party connectors or splice directly into the loom. The result is a cleaner install with a factory-adjacent finish. This is the kind of upgrade that looks like it should have come from the factory — and that's precisely the point.
What's Included
💡
LED Fog Light Units (x2)
Left & right front fitment, ABS lens housing
🔌
Wiring Harness
Pre-wired loom for direct connection, no splicing required
🔧
Mounting Hardware
Fixings required for fitment to bumper aperture
📄
Fitment Instructions
Step-by-step guide for installation reference
Product Highlights
- Dual-function LED units — fog light and DRL in one
- 100% brand new — not refurbished or remanufactured
- ABS plastic lens — impact-resistant and weather-sealed
- 12V direct compatibility with L663 Defender electrical system
- Low power consumption — reduced alternator load vs. halogen
- Complete wiring harness included — no third-party loom needed
- Front bumper fitment — purpose-designed for L663 architecture
- High-intensity LED array — improved forward light throw
- Clean factory-style aesthetic — no exposed wiring or aftermarket look
- Straightforward two-light kit — symmetrical left and right units
Compatibility
| Model |
Code |
Year Range |
Fitment |
| Land Rover Defender 90 |
L663 |
2020 · 2021 · 2022 |
Direct Fit |
| Land Rover Defender 110 |
L663 |
2020 · 2021 · 2022 |
Direct Fit |
| Land Rover Defender 130 |
L663 |
2022 |
Direct Fit |
| Land Rover Defender (Classic) |
L316 |
Pre-2020 |
Not Compatible |
| Range Rover Sport |
L494 / L461 |
All Years |
Not Compatible |
| Range Rover Vogue |
L405 / L460 |
All Years |
Not Compatible |
| Range Rover Velar |
L560 |
All Years |
Not Compatible |
Installation Notes
Difficulty: Moderate · Estimated Time: 60–90 minutes · Tools Required: Trim removal tools, panel cutters, screwdrivers
- Ensure the vehicle is on level ground with the ignition off and the 12V system fully isolated before beginning any electrical work.
- Remove the lower front bumper trim panels using appropriate trim removal tools to expose the existing fog light apertures on both sides.
- Carefully cut out the relevant sections of the original plastic bumper insert as required to allow each LED unit to seat flush and securely — measure twice before cutting.
- Slot each LED fog light unit into the prepared aperture and secure using the supplied mounting hardware, ensuring a firm and rattle-free fit.
- Route the wiring harness through the bumper cavity, connecting each unit to the harness connectors and ensuring the loom is secured away from any heat or moving components.
- Connect the harness to the vehicle's existing fog light circuit and restore the bumper trim panels, checking alignment before final fixing.
- Restore power to the vehicle and test both the fog light and DRL functions before completing the installation.
⚠ Important: This installation requires permanent modification to the original plastic bumper insert. Please ensure you are comfortable with this before proceeding. If in doubt, we recommend having the fitment carried out by a qualified automotive technician. This modification cannot be reversed once the cutting is complete.
Built for Defenders. Trusted by Enthusiasts.
Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium exterior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee.
Shop All Defender L663 Accessories
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
🚚 Worldwide Shipping via DHL · FedEx · UPS · TNT
🔁 30-Day Money-Back Guarantee
📞 +44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product images are for illustrative purposes only; minor variations in finish or colour may occur.
