Victorious Automotive · Range Rover Evoque L551 · Interior Trim
ABS Chrome Interior Door Trim for Range Rover Evoque L551 2019–2020 — Without Memory Button
A precision-fit set of four chrome door decoration trims that elevate the cabin ambience of your Evoque L551 with a clean, contemporary silver finish — no modification required.
Evoque L551
2019–2020
ABS Chrome
Without Memory Button
Set of 4
Direct Fit
Adhesive Install
Silver Finish
Overview
The second-generation Range Rover Evoque (L551) was a significant step forward for Land Rover — sharper styling, a more refined interior architecture, and an elevated standard of cabin quality that owners rightly take pride in. It's a vehicle that rewards attention to detail, and the door panel area is one of the most-touched, most-noticed surfaces inside the cabin every single day.
These ABS Chrome Interior Door Trims are designed from the ground up for the 2019–2020 Evoque L551, specifically for vehicles specified without the memory seat button. Each piece is formed from high-grade ABS plastic with a polished chrome-effect silver finish that harmonises with the Evoque's existing interior brightwork — blending in naturally rather than standing out as an aftermarket addition. The result is a more cohesive, premium-looking door panel that feels as though it left the factory that way.
Installation is entirely adhesive-based, using automotive-grade double-sided tape that bonds reliably to the door panel surface without drilling, cutting, or removing any trim. This is a genuine quality-of-life upgrade that takes minutes to fit and delivers a lasting visual improvement every time you open the door.
What's Included
🪟
Chrome Door Trim × 4
One piece per door — full set for all four doors
🔧
Pre-Applied Adhesive Tape
Automotive-grade bonding — no additional hardware needed
📋
Installation Guidance
Step-by-step instructions for a clean, confident fit
Product Highlights
- Precision-engineered for Evoque L551 2019–2020 without memory button
- High-gloss ABS chrome finish matches factory interior brightwork
- Full set of four trims — all doors covered in one purchase
- Pre-applied automotive adhesive tape for tool-free installation
- Durable ABS construction resists warping, cracking, and UV fade
- Lightweight at 400g total — no door mechanism impact
- Silver chrome tone complements both dark and light interior colour schemes
- Reversible installation — can be removed cleanly if required
- No drilling, cutting, or panel removal required
- Immediate visual upgrade to one of the most-used surfaces in the cabin
Specifications
| Specification |
Detail |
| Material |
ABS Plastic with Chrome Finish |
| Colour |
Silver Chrome |
| Item Length |
46 cm |
| Item Width |
10 cm |
| Item Height |
8 cm |
| Item Weight |
400 g |
| Quantity |
4 pieces (full set) |
| Fitment Type |
Direct Fit — adhesive mount |
Compatibility
| Vehicle |
Generation |
Years |
Trim Variant |
Fitment |
| Range Rover Evoque |
L551 |
2019 |
Without Memory Button |
Direct Fit |
| Range Rover Evoque |
L551 |
2020 |
Without Memory Button |
Direct Fit |
| Range Rover Evoque |
L551 |
2019–2020 |
With Memory Button |
Not Compatible |
| Range Rover Evoque |
L538 (1st Gen) |
2011–2018 |
All |
Not Compatible |
| Range Rover Evoque |
L551 |
2021+ |
All |
Verify Before Purchase |
Not sure which specification your Evoque is? Check your door panel around the seat adjustment controls — if there is no memory seat button present, this set is the correct fitment.
Installation Notes
🛠 Difficulty: Easy · ⏱ Estimated Time: 15–25 minutes · 🔩 Tools Required: None
- Begin with all four door panels at room temperature. Cold surfaces can reduce initial adhesive bond strength — if your vehicle has been parked outdoors in cold weather, allow the interior to warm up for 10–15 minutes before starting.
- Thoroughly clean each door panel mounting area using an isopropyl alcohol wipe or clean microfibre cloth. Remove any dust, grease, or residue entirely and allow the surface to dry completely.
- Dry-fit each trim piece to its corresponding door panel to confirm alignment and positioning before removing the adhesive backing. Note any trim clips or panel edges that may affect final placement.
- Peel the adhesive backing from the first trim piece. Align carefully with the door panel — starting from one end and pressing firmly along the full length to eliminate air gaps and ensure full surface contact.
- Apply firm, even pressure across the entire trim for 30–60 seconds. This activates the adhesive bond and ensures a secure, lasting fit.
- Repeat for all four door trims. Avoid applying significant force or stress to the trims for at least 24 hours to allow the adhesive to fully cure.
⚠ Important: These trims are specifically designed for Range Rover Evoque L551 models without the memory seat button. Attempting to fit these trims on a vehicle with the memory button feature will result in incorrect fitment. If you are unsure of your vehicle's specification, please contact our team before ordering — we're happy to help confirm compatibility.
Upgrade Your Evoque Interior Today
Browse our full collection of Range Rover Evoque L551 accessories and find everything you need to personalise and protect your vehicle — curated by enthusiasts, trusted by owners worldwide.
Shop Evoque L551 Accessories
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
📦 Worldwide Shipping via DHL, FedEx, UPS & TNT
🔄 30-Day Money-Back Guarantee
📞 +44 203 943 9919 Mon–Fri, 9am–7pm
Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification before purchase.
