Products

Victorious Automotive · Range Rover Vogue L460 · Interior Trim ABS Carbon Fiber Window Switches Trim — Range Rover Vogue L460 2023–2024 A precision-crafted door panel upgrade that brings a refined carbon fibre aesthetic to the window switch surrounds of your new-generation Range Rover Vogue L460. Range Rover Vogue L460 2023–2024 Carbon Fibre Finish ABS Material Direct Fit No Drilling Required Interior Trim Door Panel Upgrade Overview The fifth-generation Range Rover Vogue L460 sets an extraordinarily high bar for cabin quality, pairing its architecture of uncluttered surfaces with premium material choices throughout. For owners who want to go further — personalising those details that catch the eye every time a door is opened — the window switch panel is one of the most visible and tactile contact points in the entire cabin. This ABS Carbon Fiber Window Switches Trim has been developed with the exact contours of the L460's door panel in mind. The wrap-textured carbon fibre patterned surface introduces a sporting, contemporary contrast against the L460's softer interior tones, adding depth and visual interest without altering the clean lines that define the new generation. Whether you're building a blacked-out sport interior theme or simply elevating individual details, this trim delivers a meaningful upgrade at one of the most noticed points in the cabin. Constructed from high-grade ABS — the same material class used in OEM automotive trim manufacturing — this piece is engineered to resist daily handling, UV exposure, and the stresses of temperature fluctuation that come with a vehicle that transitions between heated garages and outdoor environments. The adhesive-backed fitting system means no permanent modification to your vehicle's door card whatsoever. What's Included 🪟 Carbon Fibre Window Switch Trim x1 — ABS with carbon fibre finish, pre-cut to L460 spec 🔲 Pre-Applied Adhesive Tape Double-sided automotive-grade tape, factory-applied to reverse 📄 Installation Guide Step-by-step fitment instructions included in packaging Product Highlights Precision-cut to match the L460 window switch panel geometry exactly Carbon fibre texture finish with a gloss-enhanced surface layer High-grade ABS construction resistant to warping and cracking No drilling, no permanent modification — fully reversible fit Pre-applied double-sided automotive adhesive for a seamless bond Protects the underlying trim panel from scratches and scuffs UV-stable finish designed to retain colour and gloss over time Compatible with both left and right-hand drive L460 configurations Manufactured in a quality-certified automotive trim facility Complements other carbon fibre interior upgrades for a cohesive look Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Begin with the vehicle parked and the interior at room temperature. Avoid fitting in direct sunlight or very cold conditions, as this affects adhesive performance. Thoroughly clean the existing window switch trim panel using isopropyl alcohol (IPA) on a lint-free cloth. Remove all dust, oils, and residue, then allow to dry completely — approximately 2 to 3 minutes. Test-fit the carbon fibre trim piece over the switch panel without removing the adhesive backing, confirming alignment across all edges and cut-outs before committing to the bond. Peel back the adhesive liner carefully from the reverse of the trim piece, taking care not to touch the adhesive surface with bare fingers. Align the trim piece precisely from one end and press firmly into position, applying sustained pressure across the entire surface for 30 to 60 seconds to activate the adhesive bond. Allow the adhesive to cure fully for a minimum of 24 hours before exposing the trim to moisture, cleaning products, or significant temperature change. ⚠ Note: Ensure the door panel surface is completely dry and free of any silicone-based detailing products before application. Silicone residue will significantly reduce adhesive strength and may cause the trim to detach over time. If you have recently treated your interior with a conditioning product, clean with IPA before proceeding. Complete Your L460 Interior Browse our full collection of Range Rover Vogue L460 interior accessories — from dashboard trim to gear surround upgrades — all designed with the same commitment to precision fit and premium finish. Shop Range Rover Vogue L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L461 / Vogue L460 · Interior Trim ABS Carbon Fibre & Black Dash Surround Frame — Range Rover Sport L461 & Vogue L460 (2023–2024) A precision-fitted dashboard surround trim that elevates the interior aesthetic of the new-generation Range Rover Sport L461 and Vogue L460 with a sharp carbon fibre or gloss black finish — zero modification required. Range Rover Sport L461 Range Rover Vogue L460 2023–2024 ABS Material Carbon Fibre Finish Gloss Black Direct Fit No Drilling ISO9001 Certified Overview The Range Rover Sport L461 and Vogue L460 represent Land Rover's most refined interior design to date — a cabin built around clean lines, premium materials, and an unmistakable sense of purpose. For owners who want to take that interior one step further, the details matter enormously. The dashboard surround is one of the most visually prominent surfaces in the cabin, and upgrading it makes an immediate and lasting impression. This ABS carbon fibre and black dash surround frame is designed and manufactured exclusively for the 2023–2024 Range Rover Sport L461 and Vogue L460. Precision-moulded to the exact contours of the factory dashboard, it slots seamlessly into place without any cutting, drilling, or professional installation. The carbon fibre weave finish adds depth and texture to the cabin, while the gloss black option delivers a bold, understated elegance that complements the Sport's darker interior trims particularly well. Produced in an ISO9001-certified facility, the ABS construction offers genuine scratch and wear resistance — this isn't a decorative piece that fades or chips with daily use. Whether you're speccing up a new delivery or refreshing a current vehicle, this trim is a considered, well-executed upgrade that looks factory-fitted from day one. What's Included 🖼️ Dashboard Surround Frame × 1 Full dash trim piece in chosen finish 🔖 Pre-Applied 3M Adhesive Double-sided tape pre-fitted to rear 📦 Retail Packaging Boxed and protected for safe delivery 📋 Fitment Guide Basic installation reference included Product Highlights Precision-moulded for the L461 Sport and L460 Vogue dashboard contours High-grade ABS construction — rigid, durable, and lightweight Carbon fibre weave or gloss black finish options available Pre-applied 3M-grade double-sided adhesive for clean installation Scratch and abrasion-resistant surface coating No drilling, cutting, or permanent modification required Manufactured in an ISO9001-certified production facility 100% new — supplied in branded retail box Fully reversible installation — remove without damage to OEM surfaces Seamless OEM-style fitment — looks factory-fitted once installed Compatibility Vehicle Model Code Year Range Fitment Range Rover Sport L461 2023 – 2024 Direct Fit Range Rover Vogue L460 2023 – 2024 Direct Fit Range Rover Sport L494 2013 – 2022 Not Compatible Range Rover Vogue L405 2013 – 2021 Not Compatible Range Rover Defender L663 2020 – 2024 Not Compatible Range Rover Velar L560 2018 – 2024 Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 15–25 Minutes  |  🔧 Tools Required: None Thoroughly clean the factory dashboard surround surface with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesion and a clean bond. Dry-fit the trim piece against the dashboard without removing the adhesive backing to confirm the fit, alignment, and coverage before committing to installation. Carefully peel back a small section of the adhesive liner. Align one edge of the trim to the dashboard and press firmly into position, slowly peeling the remaining liner as you work across the panel. Once positioned, apply firm and even pressure across the entire surface of the trim for 30–60 seconds to activate the adhesive bond and eliminate any air pockets. Allow the adhesive to cure at room temperature for a minimum of 2–4 hours before exposing the vehicle to rain, car washes, or extreme temperature changes. ⚠ Important: Please verify your exact model code (L461 or L460) and production year before ordering. Dashboard specifications may vary between early and late production runs within the 2023–2024 range. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Shop the Full L461 & L460 Interior Collection This dash trim is just one piece of the picture. Browse our complete interior upgrade range for the new Range Rover Sport L461 and Vogue L460 — from door handle surrounds to centre console trims, all precision-fitted and ready to install. Shop Range Rover Sport L461 → Shop Range Rover Vogue L460 → Buying 2 or more items? Use code 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L461 · Interior Trim ABS Carbon Fibre Centre Console Side Trim for Range Rover Sport L461 2023–2024 A precision-cut carbon fibre effect interior upgrade that elevates the Sport's cabin with a sportier, more bespoke aesthetic — installed in minutes with no tools required. Range Rover Sport L461 2023–2024 ABS Material Carbon Fibre Finish Centre Console Interior Trim No-Drill Fit 3M Adhesive Overview The Range Rover Sport L461 — launched in its third generation in 2022 — represents a genuine step change in driver-focused dynamics and interior sophistication. Its cabin is already one of the most premium spaces in its class, but for owners who want their Sport to feel truly individual, the details matter. The centre console is one of the most visually prominent areas of the interior, seen and touched on every journey — and it's one of the first places enthusiasts look to personalise. These centre console side trim panels deliver a sharp carbon fibre aesthetic using high-grade ABS material, moulded and finished to mirror the exact contours of the L461's centre console architecture. The carbon fibre weave pattern adds visual depth and a motorsport-inspired edge that sits naturally alongside the Sport's performance character — whether your interior is finished in light or dark tones. Manufactured in an ISO9001-certified facility and exported worldwide, these trim pieces are built to last. The scratch-resistant ABS surface resists daily wear, while the precision moulding ensures a seamless fitment with no visible gaps or misalignment. Installation requires no tools, no permanent modifications, and no mechanical knowledge — just a clean surface, the supplied 3M adhesive, and a few minutes of your time. What's Included 🔲 Centre Console Side Trim Set Carbon fibre finish ABS panels, left and right pair 🔧 Pre-Applied 3M Adhesive Double-sided tape pre-fitted to the rear of each panel 📦 Protective Retail Packaging Brand new, boxed and protected for safe transit Product Highlights Precision-moulded ABS for exact fitment on L461 console geometry Carbon fibre weave finish adds a motorsport-inspired interior aesthetic Scratch and abrasion resistant surface for long-term durability Pre-applied 3M double-sided adhesive for a clean, tool-free install No drilling, cutting or permanent modifications required ISO9001-certified manufacturing with global export quality standards Direct OEM-style fitment — no visible gaps or misalignment Lightweight ABS construction adds no perceptible weight Enhances the visual depth and premium feel of the Sport's interior 100% new condition, individually boxed and quality checked Compatibility Vehicle Code Year Range Fitment Range Rover Sport L461 2023 – 2024 Direct Fit Range Rover Sport L494 2013 – 2022 Not Compatible Range Rover Vogue L460 2022 – 2024 Not Compatible Range Rover Vogue L405 2013 – 2021 Not Compatible Defender L663 2020 – 2024 Not Compatible Range Rover Velar L560 2018 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Thoroughly clean the centre console side surfaces where the trim will be applied. Remove all dust, oils and residue — a microfibre cloth with isopropyl alcohol is recommended for best adhesive bonding. Dry-fit the trim panels against the console to confirm alignment and orientation before committing. Compare carefully with the product images to ensure correct positioning. Peel the protective backing from the pre-applied 3M double-sided adhesive on the rear of each trim panel. Carefully align the panel to the console surface and press firmly, applying consistent pressure across the full surface for 30–60 seconds to ensure a strong bond. Repeat for the opposite side. Avoid washing the vehicle or exposing the panels to moisture for at least 48 hours after installation to allow the adhesive to fully cure. ⚠ Important: Always confirm the trim panels match your vehicle's console layout by comparing with the product images prior to installation. Console configurations can vary by trim level and market specification. Once the adhesive is activated, repositioning may affect bonding strength. Complete Your L461 Interior Explore the full range of Range Rover Sport L461 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Range Rover Sport L461 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L461 / Vogue L460 · Exterior Trim ABS Carbon Fibre & Matte Black Exterior Door Trim — Range Rover Sport L461 / Vogue L460 (2023–2024) A precision-engineered door surround upgrade that brings defined carbon fibre and matte black contrast to the exterior of your new-generation Range Rover — no cutting, no drilling, no compromise. Range Rover Sport L461 Range Rover Vogue L460 2023–2024 ABS Polymer Carbon Fibre Finish Matte Black No-Drill Fit Exterior Trim Overview The fifth-generation Range Rover Sport L461 and the full-size Range Rover L460 Vogue represent the most refined expressions of the nameplate to date — a blend of restrained elegance and commanding road presence. Both vehicles carry clean exterior lines that reward considered, well-matched enhancements. Poorly chosen trim additions can undermine that factory cohesion instantly. The right ones, however, elevate it. These ABS exterior door trims have been developed specifically for the 2023 and 2024 model years of both the L461 Sport and L460 Vogue. Each piece is formed in high-grade ABS polymer, finished in either a carbon fibre texture or matte black — two finishes that align naturally with the Sport's performance-forward character and the Vogue's darker styling packages. The trims wrap cleanly around the door surrounds, adding visual depth and definition without overwhelming the vehicle's factory aesthetic. Installation is designed to be straightforward. A pre-applied, automotive-grade double-sided adhesive ensures a secure bond to the factory door surface without requiring any permanent modification. Whether you're enhancing a daily driver or refining a recently delivered vehicle, these trims offer a meaningful visual upgrade that holds up to the British weather and the demands of regular use. What's Included 🚪 Full Door Trim Set Complete set covering all door positions — vehicle-specific fit 🔲 Pre-Applied Adhesive Automotive-grade double-sided tape factory-applied to each piece 🧽 Surface Prep Wipe Alcohol prep wipe included for a clean, contaminant-free bond 📄 Installation Guide Step-by-step fitting instructions for a confident first-time install Product Highlights Precision moulded specifically for the L461 Sport and L460 Vogue door profiles High-grade ABS polymer construction — impact-resistant and dimensionally stable Carbon fibre texture finish adds a layered, premium visual character to the exterior Matte black variant pairs cleanly with SVO-specification and blacked-out trim levels Resistant to UV degradation — finish does not fade or yellow under prolonged sun exposure Scratch and abrasion resistant surface — stands up to everyday door contact No drilling, cutting, or permanent modification required for installation Pre-applied automotive-grade adhesive provides a strong, weatherproof bond Flush fitment to factory door panels — no proud edges or misalignment Reversible installation — can be removed cleanly without damaging factory paintwork Compatibility Vehicle Code Years Fitment Range Rover Sport L461 2023–2024 Direct Fit Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 minutes  ·  🔧 Tools Required: None Ensure your vehicle has been parked in a dry, sheltered environment with an ambient temperature above 15°C. Adhesive bonding performance is reduced in cold or damp conditions. Thoroughly clean each door panel area where the trim will be applied. Use the included alcohol prep wipe and allow the surface to dry completely before proceeding. Dry-fit each trim piece to confirm correct positioning and alignment before committing. The contoured edges should sit flush with the door panel with no gaps. Peel the protective backing from the pre-applied adhesive tape on the first trim piece. Do not touch the adhesive surface. Carefully align the piece to the door panel and press firmly into position. Apply consistent pressure along the full length of the trim for a minimum of 30 seconds. Repeat for each remaining trim piece, working methodically from front to rear doors. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the trim to sustained moisture. ⚠ Important: Verify fitment using the product images before purchase. The L461 Sport and L460 Vogue share this fitment, but trim profiles differ from all previous generation models. If you are unsure of your vehicle's code or model year, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Range Rover With Confidence Every product in the Victorious range is selected for fit, finish, and long-term quality. Browse the full collection for your L461 or L460 — and use the code below to save on your second item. Shop Range Rover Sport L461 → Shop Range Rover Vogue L460 → Buy any 2 items and save 20% with code 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Air Vent Covers – Jaecoo J7 Premium stick-on carbon fibre trim for an instant interior upgrade with zero drilling or permanent modification. Jaecoo J7 2023+ Carbon Fibre ABS Stick-On Installation OEM-Style Fit Overview The Jaecoo J7 is engineered for adventure, but its interior deserves the same premium attention as its powertrain. These ABS Carbon Fibre Air Vent Covers deliver that sportier, more refined aesthetic without compromise—or drilling. Manufactured from automotive-grade ABS with a flawless carbon fibre style finish, these trim pieces replace the stock air vent surrounds with precision-engineered covers that integrate seamlessly into your cabin. The modern grey carbon pattern adds visual depth, aggression, and that contemporary luxury touch that factory interiors often lack. Installation takes minutes. No tools required. No permanent modifications. Apply, press, and drive. The adhesive backing is engineered for automotive environments—durable against heat, humidity, and daily use—while remaining removable if you ever change direction. It's the fastest way to refresh your J7's interior without dealer pricing. What's Included 📦 2x Air Vent Covers Carbon fibre ABS trim pieces ✓ Pre-Applied Adhesive Automotive-grade backing Highlights Designed specifically for Jaecoo J7 Premium ABS construction Carbon fibre style finish Quick stick-on installation Automotive-grade adhesive backing Enhances cabin instantly OEM-style precision fitment No drilling or modifications Durable and lightweight Removable if desired Installation Difficulty: Easy | Time: 10–15 minutes Prepare: Clean the air vent surrounds thoroughly with a microfibre cloth. Remove any dust, oils, or residue. Position: Carefully align each vent cover over its corresponding vent surround. Apply: Starting from one edge, press the cover firmly onto the vent. Work across to ensure even adhesion. Set: Allow 24 hours for full adhesive cure before using interior controls or cleaning. Note: Confirm fitment with your specific J7 variant before purchase. Carbon fibre finish is ABS-style; not genuine carbon fibre. Colours may vary slightly depending on lighting and screen display. Compatibility Variant Fitment Jaecoo J7 (2023–2026) Direct Fit Other models Not Compatible Ready to Upgrade Your J7? Transform your interior in minutes. No dealer visit. No installation costs. Premium carbon fibre styling for the price of a coffee. Shop Jaecoo Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Jaecoo, Chery, or any OEM manufacturer. Product names and vehicle codes are used solely for identification and compatibility purposes. All trademarks and registered marks are the property of their respective owners.

Victorious · Jaecoo J7 · Exterior Styling ABS Carbon Fibre Door Handle Covers for Jaecoo J7 Premium ABS door handle covers with authentic carbon fibre styling—an instant, non-permanent exterior upgrade for your J7. Jaecoo J7 2024–2026 ABS Material Carbon Fibre Finish Stick-On Install Overview The Jaecoo J7 is a versatile, capable compact SUV built for drivers who demand both style and substance. Whether you're navigating urban streets or exploring beyond the tarmac, the J7 deserves premium touches that reflect your attention to detail. These ABS Carbon Fibre Door Handle Covers are precision-engineered to transform the appearance of your factory handles, delivering a sleek, aggressive carbon-inspired aesthetic without permanent modifications. Manufactured from automotive-grade ABS polymer, they're lightweight, weather-resistant, and finished to OEM standards—the ideal styling solution for J7 owners seeking an understated yet unmistakable upgrade. Installation is straightforward: clean, peel, and stick. No tools. No drilling. No dealer visits. In under five minutes, your J7 gains a refined, modern presence that commands attention and sets it apart from stock. What's Included 📦 Full Door Handle Set Complete ABS covers for all door handles 🧴 Pre-Applied Adhesive Automotive-grade backing for secure fit 📋 Installation Guide Step-by-step instructions included Product Highlights Designed specifically for Jaecoo J7 (2024–2026) Premium automotive-grade ABS construction Carbon fibre-style finish with realistic texture OEM-quality precision moulding Lightweight and impact-resistant Seamless factory appearance Pre-applied automotive adhesive backing No drilling or permanent modifications required Tool-free stick-on installation Weatherproof and UV-stable Compatibility Jaecoo Model Year Range Fitment J7 2024–2026 Direct Fit J7 EV 2024–2026 Direct Fit Other Jaecoo Models All years Not Compatible Note: Please verify your vehicle model and year before ordering. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation DIY Installation – 5 Minutes Prepare the handles: Clean all four door handles with warm soapy water and dry thoroughly with a microfibre cloth. Remove any wax or protective coating with isopropyl alcohol. Position the covers: Align each cover carefully over the factory handle, checking fit and alignment before removing adhesive backing. Apply the covers: Remove the backing strip and press firmly onto the handle, working from centre outward to eliminate air bubbles. Set and cure: Allow 24 hours for adhesive to fully cure before operating doors normally. Final check: Inspect all seams and edges for secure adhesion; apply gentle pressure if needed. ⚠️ Important: Ensure handles are completely clean and dry before installation. Oil, dirt, or moisture will compromise adhesion. In cold weather (below 10°C), allow extra curing time. Why Choose Victorious At Victorious Automotive, we specialise in premium vehicle styling for owners who refuse to compromise. Our ABS Carbon Fibre Door Handle Covers are tested to withstand UK weather, UV exposure, and everyday use without degradation. Every product is backed by our 30-day money-back guarantee—if you're not satisfied, we'll refund you, no questions asked. We've earned a 4.9/5-star rating from over 12,300 verified reviews by prioritising quality, customer support, and fast worldwide shipping via DHL, FedEx, UPS, and TNT. Ready to Elevate Your J7 Transform your door handles in minutes. No tools. No fuss. Just premium styling that commands attention on every journey. Shop Jaecoo J7 Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 30-Day Money Back Worldwide Shipping Mon–Fri 9am–7pm Support Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaecoo, Chery Automobile Co., Ltd, or any official Jaecoo distributor. All product names and trademarks remain the property of their respective owners. Vehicle modifications are at the owner's risk; we recommend professional installation if uncertain.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Door Panel Covers – Jaecoo J7 Elevate your J7's cabin with premium carbon-style door panel trim that combines luxury styling with everyday durability. Jaecoo J7 ABS Material Carbon Fibre Finish Stick-On Install OEM Fitment Overview The Jaecoo J7 is a bold, modern SUV that deserves an equally sophisticated interior. These ABS Carbon Fibre Door Panel Covers transform the factory door trim with a sleek, sportier aesthetic that feels premium without the weight or cost of genuine carbon fibre. Manufactured from automotive-grade ABS plastic, each cover is precision-moulded to match the J7's door panel contours perfectly. The carbon-style finish delivers instant visual impact, while the durable material resists scratches, fading, and daily wear. Installation takes minutes—no drilling, no permanent modifications, no regrets. Whether you're refining a subtle upgrade or committing to a complete interior restyle, these covers are a proven foundation for customisation. They protect your original panels, look genuinely premium up close, and come backed by our 30-day money-back guarantee. What's Included 📦 Full Door Panel Set Complete coverage for all four doors 🎨 Carbon Fibre Finish Realistic texture, premium appearance 🔧 Adhesive Backing Pre-applied, automotive-grade formula 📋 Installation Guide Simple steps, no technical skill needed Product Highlights Designed specifically for Jaecoo J7 door panels Premium automotive-grade ABS construction Realistic carbon fibre-style finish texture Precision-moulded for OEM-level fitment Lightweight yet extremely durable material Protects original panels from scratches and UV damage Pre-glued with automotive adhesive backing Tool-free, no-drilling installation process Reversible—can be safely removed without residue Instantly elevates cabin aesthetics and perceived quality Compatibility Model Year Range Fitment Jaecoo J7 2023–Present Direct Fit Other Jaecoo models All years Not Compatible Other makes/models All years Not Compatible Always confirm your vehicle year and door panel shape before ordering. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if unsure. Installation Difficulty: Beginner | Time: 20–30 minutes Prepare the surface: Clean the entire door panel thoroughly with a microfibre cloth and mild panel cleaner. Remove any dust, dirt, or oils. Dry completely: Wait 5–10 minutes to ensure the surface is fully dry. Peel the backing: Carefully peel the protective adhesive film from the rear of each cover. Align and position: Starting at the top, gently align the cover with the door panel edge. Work your way down slowly. Press firmly: Once positioned, press the entire surface firmly with your hand or a soft roller to activate the adhesive. Allow to cure: Do not touch or apply pressure for at least 24 hours to allow full adhesion. Note: These covers use permanent adhesive. Removal is possible but may require heat and careful technique. Test fitment before committing to application. Not suitable for textured or curved door panels. Key Notes This is ABS carbon-style, not genuine carbon fibre Colour and finish may vary slightly by lighting and screen Designed for J7 models only—confirm compatibility before purchase Pre-installation surface prep is essential for lasting adhesion Remove protective film entirely before application Safe for all interior paint types and trim materials Complete Your J7 Interior These door panel covers are just the start. Pair them with our full Jaecoo J7 interior collection to create a cohesive, premium cabin that reflects your taste and attention to detail. Shop Jaecoo Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💰 30-day money-back guarantee 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile Co., Ltd., or any official Jaecoo dealer network. All product names and vehicle marks are the property of their respective owners. This product is designed for enhancement and personalisation only.

Victorious · Jaecoo J7 · Exterior Styling ABS Carbon Fibre Fuel Tank Cover – Jaecoo J7 Premium ABS carbon-style fuel cap trim. Precision-fit, stick-on installation. Zero modifications required. Jaecoo J7 ABS Carbon Fibre Fuel Tank Cover OEM+ Styling Lightweight Overview The Jaecoo J7 deserves accessories that match its modern design language and refined presence on the road. This ABS Carbon Fibre Fuel Tank Cover is engineered to add a subtle yet impactful styling upgrade around the fuel cap area, giving your J7 a more premium, cohesive exterior appearance without aggressive modification. Manufactured from automotive-grade ABS plastic with a carbon fibre-inspired finish, this cover combines durability with lightweight construction. The precision-moulded design ensures a clean, factory-style fitment that looks intentional—not aftermarket. Weather-resistant materials mean it performs consistently across all climates and driving conditions. Whether you're building a complete carbon styling package or simply want to refine a single area, this fuel tank cover delivers OEM+ aesthetics in minutes. No drilling, no permanent changes, no regret. What's Included 📦 1x Fuel Tank Cover ABS carbon-style finish, pre-adhesive backed Product Highlights Designed specifically for Jaecoo J7 Premium automotive-grade ABS construction Carbon fibre-inspired aesthetic finish Lightweight and weather resistant OEM-style precision fitment Pre-applied automotive-grade adhesive No drilling or vehicle modification required Quick 5-minute stick-on installation Enhances exterior styling cohesion Durable and colour-stable design Compatibility Vehicle Model Year Compatibility Jaecoo J7 2024–present Direct Fit Please confirm your vehicle specification before purchase. Fuel tank cover design may vary by market and production year. Contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) if you're unsure about fitment. Installation Difficulty: Beginner | Time: 5 Minutes Open fuel filler door and inspect the fuel cap area for dust, dirt, or residue. Use a clean, dry cloth to thoroughly wipe down the fuel cap surround. Allow to air-dry completely. Carefully peel back the adhesive backing on the cover, starting from one corner. Align the cover over the fuel tank cap area, ensuring even spacing on all sides. Press firmly and evenly across the entire surface, working out any trapped air bubbles. Allow adhesive to cure for 24 hours before opening the fuel filler door again. Surface preparation is critical. Any residual dirt, wax, or sealant will prevent proper adhesion. Take your time with cleaning—it takes 30 seconds and ensures a lifetime of secure fitment. Important Notes Carbon Fibre Finish: This cover features an ABS carbon-style visual finish, not genuine carbon fibre. It delivers the aesthetic at a fraction of the cost and weight, with superior durability in real-world conditions. Colour Variance: Lighting, screen settings, and monitor calibration may cause slight perceived colour differences between product images and your physical item. The finish is colour-stable and UV-resistant. Adhesive Strength: Automotive-grade 3M adhesive backing is permanent once applied. Do not attempt to reposition after initial contact. Take time to align correctly before pressing down. Ready to Upgrade Your J7? Transform your fuel cap area with premium carbon-style styling. Clean installation, lasting durability, and the confidence that comes with OEM+ design. Your Jaecoo deserves it. Shop Jaecoo Accessories Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars ✓ 12,300+ Reviews ✓ 30-Day Guarantee ✓ Worldwide Shipping This product is designed and sold by Victorious Automotive Ltd. Victorious is not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile Co., Ltd., or any official manufacturer. All product names, logos, and brands are the property of their respective owners. Fitment compatibility is the responsibility of the buyer. Victorious recommends professional installation if you are unsure. See our full disclaimer for details.

Victorious · Jaecoo J7 · Exterior Styling ABS Carbon Fibre Mirror Covers for Jaecoo J7 Instantly elevate your J7's exterior with a premium carbon fibre-inspired finish that delivers authentic sportiness in minutes. Jaecoo J7 ABS Carbon Fibre Exterior Styling Stick-On Install Weather Resistant Overview If you own a Jaecoo J7, you understand the appeal of a vehicle that blends rugged capability with modern design. These ABS Carbon Fibre Mirror Covers are engineered to enhance that aesthetic—delivering a factory-finished upgrade that transforms your side mirrors into a statement piece without compromise. Manufactured from automotive-grade ABS plastic, these covers feature a premium carbon fibre-inspired finish that catches light beautifully and resists weathering. They're precision-moulded to match OEM contours exactly, so fitment is seamless and the upgrade feels purposeful rather than bolted-on. No drilling, no modifications, no permanent changes—just clean styling that respects your J7's original design language. Whether you're after a sportier silhouette or simply want to refresh your mirrors without dealer pricing, these covers deliver genuine value. Weather-resistant construction means they'll hold their finish through sun, rain, and seasonal changes. Installation takes minutes and requires only a clean surface and careful placement. What's Included 📦 Full Mirror Cover Set Left and right ABS covers with carbon fibre finish 🔧 Automotive Adhesive Backing Pre-applied, ready-to-stick installation Product Highlights Designed specifically for Jaecoo J7 Premium automotive-grade ABS material Carbon fibre style finish OEM-style precision fitment Weather-resistant construction Lightweight and impact-resistant No drilling or modifications required Stick-on installation in under 10 minutes Factory-finished appearance Durable long-term wear Compatibility Vehicle Year Status Jaecoo J7 2023–2026 Direct Fit Installation Notes Difficulty: Beginner | Time: 10 minutes Clean both mirror surfaces thoroughly with soap and water, then dry completely with a lint-free cloth Remove the protective backing from the adhesive side of the first mirror cover Carefully align the cover over the factory mirror cap, starting from the top edge Press down firmly and evenly, working out any air bubbles from centre to edges Repeat on the opposite side mirror Allow adhesive to cure for 24 hours before exposure to water or extreme temperatures Note: Carbon fibre finish is ABS carbon-style, not genuine carbon fibre. Colours may vary slightly depending on lighting and screen display settings. Confirm vehicle compatibility before purchasing. Ready to Upgrade Your J7? Transform your mirrors with genuine Jaecoo J7 styling. Premium fitment, zero hassle, and a finish that lasts. Order today and experience the Victorious difference. Shop J7 Accessories Use code 22GET20 for 20% off any 2 items 4.9/5 Stars from 12,300+ verified reviews 30-Day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile Co. Ltd, Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. Product names, logos, and trademarks remain the property of their respective owners. This product is designed for aftermarket fitment only. Always verify compatibility with your specific vehicle before purchase.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Parking Brake / Boot Trim for Jaecoo J7 Premium centre console upgrade with carbon fibre styling, OEM fitment, and stick-on installation for J7 owners seeking a refined, modern interior. Jaecoo J7 ABS Construction Carbon Fibre Style OEM Fitment No Drilling Adhesive Backed Overview The Jaecoo J7 deserves interior details that match its commanding presence on the road. This ABS Carbon Fibre Parking Brake / Boot Trim is engineered to elevate your centre console with a sophisticated, contemporary finish that transforms the look of your cabin in minutes. Precision moulded from automotive-grade ABS material, this trim delivers an authentic carbon fibre-inspired aesthetic without the fragility or cost of real carbon. It's designed to sit flush with factory geometry, creating an integrated appearance that looks purposeful, not retrofitted. The adhesive backing system is engineered for long-term durability—no drilling, no permanent modifications, completely reversible. Whether you're refreshing your J7's interior or adding a cohesive touch to other upgrades, this parking brake cover pairs functionality with style. It protects original trim surfaces from daily scuffs while delivering the premium, motorsport-inspired character Jaecoo owners expect. What's Included 📦 ABS Carbon Fibre Trim 1x parking brake / boot trim cover 🔧 Adhesive Backing Pre-applied automotive-grade adhesive Product Highlights Designed specifically for Jaecoo J7 centre console Premium automotive-grade ABS material Carbon fibre-style finish, non-real carbon OEM-style precision fitment Lightweight and durable construction Protects original trim from scratches and wear Pre-applied adhesive backing system Quick stick-on installation method No drilling or vehicle modifications required Enhances interior styling instantly Compatibility Model Year Fitment Jaecoo J7 2024 onwards Direct Fit Note: Please confirm your vehicle's trim specification before ordering. Colours may vary slightly depending on lighting and display settings. Installation Difficulty: Easy · Time: 5 minutes Clean the parking brake / boot trim surface thoroughly with a microfibre cloth and mild soapy water. Ensure the area is completely dry. Carefully peel back the protective backing from the adhesive layer. Align the carbon fibre trim with the factory trim area, starting from one corner and pressing firmly across the entire surface to ensure full contact. Allow the adhesive to set for 24 hours before operating the parking brake or boot mechanism. No professional installation required. Important: This is an ABS carbon-style finish, not genuine carbon fibre. Avoid high heat sources and aggressive solvents. If you need to remove the trim, gentle heat and a plastic scraper will lift it without damage to original surfaces. Why Victorious We ship worldwide via DHL, FedEx, UPS, and TNT. Every interior upgrade is backed by our 30-day money-back guarantee. With 4.9/5 stars across 12,300+ verified reviews, Jaecoo and Land Rover owners trust us to deliver genuine quality and expert support. Ready to Upgrade Your J7's Interior? Transform your centre console with this premium carbon fibre trim. Precision engineering, OEM fitment, no modifications. Stock is ready to ship today. Shop Jaecoo Upgrades Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars ✓ 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ Mon–Fri 9am–7pm +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer and distributor. We are not affiliated with, endorsed by, or connected to Jaecoo, Land Rover, Jaguar Land Rover, or their parent companies. All vehicle names, logos, and specifications are the property of their respective manufacturers. This product is designed for aftermarket modification and personalisation only.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Rear Cup Holder Cover – Jaecoo J7 Elevate your cabin with premium carbon-fibre styling and factory-grade protection for the rear centre console. Jaecoo J7 ABS Material Carbon Fibre Style OEM Fitment No Drilling Overview The Jaecoo J7 demands an interior as refined as its exterior presence. This ABS Carbon Fibre Rear Cup Holder Cover transforms the rear centre console with a sleek, modern aesthetic that complements the J7's premium cabin architecture while protecting factory trim from daily wear. Engineered from automotive-grade ABS, this trim piece features precision moulding for an OEM-style fit that looks like it was conceived in the design studio. The carbon-fibre-inspired finish adds depth and visual interest to an often-overlooked area, creating a cohesive premium cabin environment that extends to every sightline. Installation is effortless—adhesive-backed with no drilling or modifications required. A subtle but unmistakable upgrade for discerning owners who understand that true luxury lives in the details. What's Included 📦 ABS Carbon Fibre Rear Cup Holder Cover Precision-moulded with integrated adhesive backing 📋 Installation Guide Step-by-step instructions with surface prep guidance Product Highlights Designed specifically for Jaecoo J7 rear interior Premium automotive-grade ABS construction Carbon fibre-style finish for premium aesthetics OEM-style precision fitment Lightweight and impact-resistant Protects original factory trim from scratches Integrated adhesive backing for secure mounting Stick-on installation—no drilling required Factory-finished appearance Enhances overall cabin ambience Compatibility Vehicle Year Range Fitment Jaecoo J7 2024+ Direct Fit Installation Difficulty: Beginner | Time: 10 minutes Clean the rear cup holder area with a microfibre cloth and mild cleaner. Allow to dry completely. Inspect the adhesive backing for any damage or dust contamination. Carefully peel back the protective liner from the adhesive backing. Align the cover with the factory rear cup holder trim, starting from the centre and working outward. Apply firm, even pressure across the entire surface for 30 seconds to ensure full contact. Allow 24 hours for the adhesive to cure before using the cup holder. Note: ABS carbon-fibre finish is a high-quality resin-moulded effect, not genuine carbon fibre. Colours may vary slightly under different lighting conditions. Always confirm fitment compatibility before purchasing. Own the Details Premium interiors are built on precision. This carbon-fibre rear cup holder cover is your next statement in thoughtful, understated luxury. Transform your J7's cabin today. Shop Jaecoo Upgrades Use code 22GET20 for 20% off any 2 items 4.9/5 stars — 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT Expert support — +44 203 943 9919 Victorious Automotive is not affiliated with Jaecoo, Chery, Land Rover, or Jaguar Land Rover. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility and fitment are based on manufacturer specifications and customer feedback. Always confirm vehicle year and model before purchase.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Rear Seat Air Cooler Cover – Jaecoo J7 Premium carbon-style interior trim that elevates your J7's rear cabin with OEM-precision fitment and zero installation hassle. Jaecoo J7 Carbon Fibre Style Stick-On Installation ABS Construction Rear Interior Overview The Jaecoo J7 demands interior details that match its commanding presence on road and trail. This ABS Carbon Fibre Rear Seat Air Cooler Cover transforms the rear console and air vent surround with a sleek, premium carbon-style finish that catches light and commands attention every time a passenger settles in. Manufactured from automotive-grade ABS material, this trim piece combines lightweight durability with precision engineering. The carbon fibre-inspired texture adds visual depth and sportiness to the cabin, while the oEM-style fitment ensures it sits flush against factory surfaces—no gaps, no misalignment, no compromise. It's the kind of detail that distinguishes a thoughtfully equipped J7 from one that's merely stock. Installation takes minutes. The adhesive backing is pre-applied and engineered for long-term bond strength; simply clean the surface, align, and press. No drilling, no tools, no professional fitters required. Protects original trim from dust, scratches, and daily wear whilst instantly elevating your interior's perceived quality. What's Included 📦 Rear Seat Air Cooler Cover ABS carbon-style trim piece, pre-adhesive backed Product Highlights Designed specifically for Jaecoo J7 (all years) Premium automotive-grade ABS material Carbon fibre-style textured finish OEM-precision fitment—no modifications needed Pre-applied adhesive backing—stick-on installation Lightweight and impact-resistant Protects factory trim from scratches and dust Enhances rear cabin aesthetic and perceived quality Quick 2–3 minute installation—no tools required Complements any interior colour or trim level Compatibility Vehicle Year Compatibility Jaecoo J7 2024+ Direct Fit Please confirm fitment against your J7's build year and interior layout before ordering. If unsure, contact us at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation Difficulty: Easy · Time: 3–5 minutes Prepare the surface. Open rear doors and locate the rear air vent console trim and seat back surround. Use a soft cloth or isopropyl alcohol wipe to clean the area thoroughly—remove dust, grease, and fingerprints for optimal adhesive bond. Dry completely. Allow the surface to air-dry fully (1–2 minutes) before proceeding. Peel backing. Carefully remove the adhesive backing from the carbon fibre cover—start at one corner and work slowly to avoid creasing or stretching. Align and position. Hold the cover against the rear vent surround or console and check alignment. Once satisfied, begin pressing at the centre and work outward to eliminate air bubbles. Press firmly. Apply steady pressure across the entire surface for 30–60 seconds to ensure full adhesion. Allow cure time. Avoid touching, cleaning, or exposing the vehicle to direct heat for 24 hours to allow the adhesive to reach full strength. ⚠️ Note: This is an ABS carbon-style finish, not genuine carbon fibre. Colour and texture may vary slightly depending on lighting and screen calibration. Test fit and alignment before fully committing the adhesive backing. Why Victorious? We partner with Jaecoo J7 owners who refuse to settle for half-measures. Every product we stock undergoes real-world testing, compatibility verification, and customer feedback validation before it earns a place in our catalogue. This cover reflects that commitment: premium materials, precise fitment, hassle-free installation. With a 4.9/5-star rating from over 12,300 verified customer reviews and a 30-day money-back guarantee, your satisfaction is backed by real owners and real data—not marketing speak. Ready to Elevate Your J7? Transform your rear cabin with carbon-style premium. Order now and enjoy worldwide shipping via DHL, FedEx, UPS, or TNT—plus a no-questions-asked 30-day return window. Shop Jaecoo J7 Accessories Upgrade any 2 items and save 20%. Use code 22GET20 at checkout. 4.9★ – 12,300+ reviews ✓ 30-day money-back ✓ Worldwide shipping ✓ Expert support Victorious Automotive is an independent automotive accessory retailer and is not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile, Land Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names, logos, and brands remain the property of their respective owners. Product compatibility and fitment are provided in good faith based on available specification data; we recommend contacting us directly to confirm suitability for your specific vehicle variant before purchase.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Steering Wheel Insert – Jaecoo J7 Elevate your J7 cabin with a sporty carbon-inspired steering wheel centre insert that installs in minutes. Jaecoo J7 Carbon Fibre Style Interior Trim Stick-On Install No Drilling Overview The Jaecoo J7 is a refined compact SUV that deserves cabin details matching its refined character. This ABS Carbon Fibre Steering Wheel Insert transforms the factory steering wheel centre with a premium, sport-focused aesthetic—turning one of the most frequently touched surfaces in your J7 into a design statement. Precision-moulded from automotive-grade ABS plastic and finished in a convincing carbon fibre weave pattern, this insert sits perfectly over your original trim without requiring any drilling, cutting, or professional installation. The OEM-style fitment means it looks factory-correct, not aftermarket. Whether you're refining an already elegant interior or adding that final touch of visual sophistication, this steering wheel insert delivers genuine quality at a fraction of the cost of full replacement trim. What's Included 🎛️ Steering Wheel Insert ABS carbon fibre-style centre trim ✋ Installation Guide Quick reference with surface prep tips Product Highlights Designed specifically for Jaecoo J7 steering wheels Premium automotive-grade ABS construction Realistic carbon fibre weave finish OEM-style fitment and appearance Lightweight and impact-resistant Pre-applied automotive-grade adhesive backing Stick-on installation—no tools required No drilling or vehicle modifications Protects original trim from wear and scratches Professional cabin upgrade in under 5 minutes Compatibility Vehicle Generation Years Compatibility Jaecoo J7 All 2023–Present Direct Fit Tip: Confirm your steering wheel centre trim matches factory references before ordering. Carbon fibre colour may vary slightly depending on lighting conditions. Installation Difficulty: Beginner | Time: 3–5 minutes Clean the surface. Wipe the steering wheel centre trim with a clean, dry microfibre cloth to remove dust and oils. Peel backing. Carefully remove the adhesive backing from the insert. Centre and apply. Align the insert with the steering wheel trim and press firmly from centre outward to avoid air bubbles. Allow to set. Let the adhesive cure for 24 hours before driving to ensure full bond strength. Note: This is a carbon-style ABS insert, not genuine carbon fibre. It is designed for interior cosmetic enhancement only and does not affect steering functionality. Why Choose This Insert The Jaecoo J7 deserves interior details that match its sophistication. This steering wheel insert is engineered to deliver a bespoke, premium appearance without the cost of factory upgrades or the risk of permanent modifications. It's a quick, reversible, and utterly professional way to elevate your cabin. Every detail matters when you own a refined SUV. Let's make sure your steering wheel is one of them. Ready to Upgrade Your J7 Cabin? Transform your steering wheel in minutes. No drilling. No permanent changes. Pure design refinement. Shop Jaecoo J7 Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 30-Day Money Back Worldwide Shipping +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. This product is not affiliated with, endorsed by, or manufactured by Jaecoo, Chery Automobile, or any official manufacturer. All brand names and vehicle designations are used solely for compatibility reference. Product images are representative. Actual fitment may vary by vehicle specification. Please confirm compatibility before purchase.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Window Switch Covers for Jaecoo J7 Premium carbon-style window switch trim that transforms your J7's interior with a modern, sporty aesthetic. Jaecoo J7 ABS Carbon Style Interior Upgrade Stick-On Installation OEM Fitment Overview The Jaecoo J7 demands interior touches that match its bold, capable character. These premium ABS Carbon Fibre Window Switch Covers elevate your cabin with a sleek, contemporary look that speaks to drivers who appreciate refined detailing. Precision-moulded from automotive-grade ABS, these covers feature a convincing carbon-style finish that wraps seamlessly around your factory window control panels. The lightweight construction and OEM-style fitment mean they integrate as if they were part of the original design—no compromises, no gaps. Installation takes minutes. Clean, peel, apply. No drilling, no modifications, no professional fitter required. A finishing touch that rewards attention to detail and protects your original trim in the process. What's Included 🎨 Full Window Switch Cover Set Complete coverage for all window controls 📋 Installation Guide Step-by-step application instructions 🧼 Cleaning Cloth Pre-application surface preparation Product Highlights Designed specifically for Jaecoo J7 window switch panels Premium automotive-grade ABS construction Convincing carbon fibre-style finish OEM-style fitment with precision moulding Automotive-grade adhesive backing Lightweight and impact-resistant Protects original trim from scratches and wear Tool-free stick-on installation No drilling or vehicle modifications required Instantly elevates cabin aesthetic Compatibility Vehicle Generation Years Fitment Jaecoo J7 All 2024+ Direct Fit Please confirm your vehicle specification before purchasing. Fitment is specific to Jaecoo J7 window switch panel design. Installation Notes Difficulty: Easy | Time: 10–15 minutes Clean the window switch panel area thoroughly with the supplied cloth. Remove any dust, oils, or residue. Allow the surface to dry completely. Carefully peel back the adhesive backing from one cover. Align the cover with the factory switch panel and press firmly in place, working from the centre outward to avoid air bubbles. Repeat for all remaining covers. Allow 24 hours for the adhesive to fully cure before operating the switches. Important: Carbon fibre finish is ABS carbon-style, not genuine carbon fibre. Colours may vary slightly under different lighting conditions and screen displays. Use gentle pressure during installation to avoid stretching or damaging the material. Why Choose Victorious We've spent years sourcing interior upgrades that matter—pieces that don't just look good, but feel authentic to your vehicle. These window switch covers represent that philosophy: thoughtful design, genuine materials, and fitment that respects your J7's interior proportions. Every product ships worldwide via DHL, FedEx, UPS, or TNT. We back everything with a 30-day money-back guarantee. If it's not right, we make it right. Ready to Upgrade Your J7's Interior? Add these premium carbon-style window switch covers to your cabin today. A small detail. A significant difference. Shop Jaecoo Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide shipping 💰 30-day guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaecoo, Changan Automobile, Jaguar Land Rover, or any original equipment manufacturer. All product names, logos, and brands are the property of their respective owners. This description is for compatibility and reference purposes only.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Carbon Fibre Window Switch Trims for Range Rover Velar Premium carbon fibre styling for your window controls—the upgrade found on top-spec Velar models. Velar L560 2017–2022 Carbon Fibre Finish 4-Piece Set 2-Minute Install Overview The Range Rover Velar is known for its refined, minimalist interior. These carbon fibre window switch surrounds elevate that aesthetic further—bringing the prestige of top-of-the-line specification to your cabin. Originally fitted only to higher trim levels, this upgrade is now within reach for every Velar owner who demands detail. Our ABS carbon fibre trims are engineered to match OEM fitment precisely. The pre-applied adhesive backing means installation is genuinely straightforward: clean, peel, and press. No tools, no risk, no fuss. Four pieces cover all four door windows, transforming your interior in under two minutes. Quality matters at Victorious. These aren't thin overlays—they're substantial, durable ABS with authentic carbon fibre finish that catches light exactly as it should. Your Velar will feel, and look, one step closer to concours condition. What's Included 📦 4x Window Switch Trims One pair per door, driver & passenger sides ✦ Pre-Applied Adhesive Factory-grade 3M backing—ready to install 📋 Installation Guide Step-by-step instructions included 🛡️ Victorious Guarantee 30-day money-back promise Product Highlights High-quality ABS construction with carbon fibre appearance Precise fitment for Velar 2017–2022 models Pre-applied adhesive backing—no additional tools needed Installation time: under 2 minutes per vehicle Four-piece set covers all door windows Scratch-resistant finish that ages gracefully Non-intrusive, factory-like appearance Same spec as original Range Rover equipment Worldwide shipping via DHL, FedEx, UPS, TNT Backed by Victorious Automotive 30-day guarantee Compatibility Model Years Compatibility Range Rover Velar L560 2017–2022 Direct Fit Range Rover Velar L560 2023 onwards Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Difficulty Level: Easy | Time: 2 Minutes Clean the surface: Use isopropyl alcohol or a clean microfibre cloth to remove any dust, dirt, or residue from the window switch surround areas on all four doors. Dry completely: Allow 2–3 minutes for the adhesive surface to dry fully. Moisture will reduce adhesive strength. Peel and align: Carefully peel the protective backing from the first trim. Align it precisely with the window switch surround, starting at the top edge. Press firmly: Apply steady, even pressure across the entire trim for 10–15 seconds to activate the adhesive bond. Repeat for all four doors: Follow steps 1–4 for the remaining three trims (passenger front, driver rear, passenger rear). Allow to cure: Do not touch or operate windows for 24 hours to allow adhesive to reach full strength. Note: Do not install on wet or dusty surfaces. Humidity should be below 80% for optimal adhesion. If adhesive fails to stick, contact us within 30 days for a replacement set. Ready to Upgrade Your Velar? Transform your interior with genuine carbon fibre detailing. Order your window switch trims today and experience the difference that precision engineering brings to every journey. Shop Velar Upgrades 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent, specialist retailer of aftermarket accessories for Land Rover and Range Rover vehicles. We are not affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any other OEM manufacturer. All product names and trademarks are the property of their respective owners.

Victorious Automotive · Land Rover / Range Rover · Exterior Styling ABS Carbon Fibre Rearview Mirror Cap Cover Trim — Discovery Sport 2015–2019 · Velar 2017–2020 · Evoque 2012–2018 A precise-fit mirror cap upgrade in carbon fibre, gloss black, or matte black — engineered to refresh the exterior profile of your Discovery Sport, Range Rover Velar, or Range Rover Evoque without modification. Discovery Sport 2015–2019 Velar 2017–2020 Evoque 2012–2018 ABS Plastic Carbon Fibre Finish Gloss Black Matte Black No-Drill Fit Exterior Styling Pair Included Overview The Discovery Sport, Range Rover Velar, and Range Rover Evoque each carry a distinct design language — angular, purposeful, and unmistakably modern. The door mirrors sit prominently in the vehicle's visual silhouette, and the factory-painted caps, while functional, rarely make the statement that enthusiast owners are looking for. These mirror cap covers exist precisely to change that. Manufactured from high-grade ABS thermoplastic and finished in your choice of carbon fibre weave, gloss black, or matte black, these covers slip cleanly over the existing mirror housing and are secured with premium double-sided automotive adhesive. The result is a flush, factory-quality appearance that looks like it left the production line that way — not an aftermarket add-on. Whether you're building a blacked-out spec, adding a performance-style contrast trim, or simply refreshing faded or chipped factory caps, this is one of the most effective exterior upgrades available for the price. No bodywork required. No professional installation needed. Just a clean surface, firm pressure, and a sharper-looking car. What's Included 🪞 Mirror Cap Covers × 2 Left & right pair, pre-matched to vehicle fitment 🔲 Double-Sided Adhesive Tape Pre-applied automotive-grade 3M-style bonding tape 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Precision-moulded ABS construction for an exact contour match to OEM mirror housing shape Available in three finishes: carbon fibre weave, gloss black, and matte black Lightweight and rigid — does not rattle, flex, or distort under driving conditions UV-resistant coating maintains finish integrity in direct sunlight and all weather conditions Adhesive-bonded installation — no drilling, no tools, no modification to factory bodywork Supplied as a matched pair covering both driver and passenger side mirrors Compatible with vehicles fitted with standard non-folding and power-fold mirror arms 100% brand new in original packaging — not refurbished or remanufactured Manufactured under stringent quality control to meet consistent dimensional tolerances Simple DIY fitment achievable in under 30 minutes with no prior experience Vehicle Compatibility Vehicle Year Range Trim / Notes Fitment Land Rover Discovery Sport 2015–2019 All trim levels (L550) Direct Fit Range Rover Velar 2017–2020 All trim levels (L560) Direct Fit Range Rover Evoque 2012–2018 All body styles (L538) Direct Fit Land Rover Discovery Sport 2020–Present Facelift model (L550 Phase 2) Verify Before Purchase Range Rover Evoque 2019–Present Second generation (L551) Not Compatible Range Rover Velar 2021–Present Refreshed model year Verify Before Purchase Not sure about your model year or build specification? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Thoroughly clean both mirror housings with an isopropyl alcohol wipe or panel wipe solution. Ensure all wax, polish residue, and dust are removed before proceeding. Allow the cleaned surface to dry fully — typically 2–3 minutes at room temperature. Do not apply covers to a damp surface. Dry-fit each cap cover to its corresponding mirror housing to confirm correct orientation and alignment before committing to adhesion. Peel the protective backing from the pre-applied double-sided adhesive tape on the inner surface of each cap cover. Align the cap carefully over the mirror housing, starting from the front edge and pressing firmly rearward to seat the cover flush against the housing surface. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact and a secure bond. Allow a minimum of 24 hours before washing the vehicle or exposing the adhesive bond to sustained water pressure. ⚠ Important: Surface preparation is the single most important factor in adhesion quality. Applying over waxed, oily, or dusty paintwork will significantly reduce bond strength. For best results, apply in ambient temperatures above 10°C (50°F). Avoid installation in direct sunlight on a hot surface. Shop by Vehicle Looking for additional accessories for your Land Rover or Range Rover? Browse our dedicated vehicle collections for curated fitment-specific upgrades: 🚙 Discovery Sport All accessories for the L550 platform 🚙 Range Rover Velar Styling & interior upgrades for the L560 🚙 Range Rover Evoque L538 Accessories for the 2012–2018 Evoque 🚙 Range Rover Evoque L551 2019-present second-generation Evoque Upgrade Your Mirrors Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium, fitment-specific accessories. Worldwide shipping via DHL, FedEx, UPS, and TNT. Backed by our 30-day money-back guarantee. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🌍 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle build before purchase.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim ABS Central Gear Panel Frame Cover Trim for Land Rover Discovery 5 LR5 L462 (2021–2023) Elevate the central console of your Discovery 5 with precision-cut ABS trim covers that bring a refined, custom finish to your gear panel frame — available in oak wood grain, carbon fibre, and gloss black. Discovery 5 L462 LR5 2021–2023 ABS Plastic Oak Wood Grain Carbon Fibre Gloss Black Adhesive Fit Interior Upgrade No Drilling Required Overview The Land Rover Discovery 5 L462 is one of the most capable and well-appointed SUVs on the road — a vehicle built for serious adventure without compromising on comfort or interior refinement. Owners who care about the details know that the central console is one of the most interacted-with areas of the cabin, and it deserves to look the part. These ABS central gear panel frame cover trims are designed specifically for 2021 to 2023 Discovery 5 models, slotting cleanly over the existing gear surround to deliver an instant interior upgrade. Whether you prefer the warmth of oak wood grain, the sporting edge of carbon fibre, or the clean sophistication of gloss black, each finish is precision-moulded from high-quality ABS plastic to closely replicate premium materials without the associated weight or cost. Installation requires no tools, no drilling, and no permanent modification. The double-sided adhesive backing bonds securely to your factory panels, making this one of the most accessible and reversible interior upgrades available for the Discovery 5. A small change with a noticeably premium result. What's Included 🎛️ Gear Panel Frame Cover × 2 Pre-cut ABS trim pieces for the central gear surround 🔲 Pre-Applied Adhesive Backing Double-sided tape already fitted to each piece 📦 Protective Packaging Securely packed to arrive scratch-free Product Highlights Precision-moulded specifically for the 2021–2023 Discovery 5 L462 gear panel Premium ABS plastic construction — lightweight, durable, and finish-retentive Available in oak wood grain, carbon fibre, and gloss black finishes Tool-free installation with pre-applied double-sided adhesive No permanent modification required — fully reversible upgrade Seamless factory-flush fit over the existing central console surround Scratch and UV resistant surface treatment on all finish variants Easy to clean and maintain alongside your existing interior surfaces Ships as a set of 2 pieces for complete left and right gear panel coverage 100% brand new — quality checked before dispatch Compatibility Vehicle Code Year Range Fit Land Rover Discovery 5 L462 / LR5 2021 – 2023 Direct Fit Land Rover Discovery 5 L462 / LR5 2017 – 2020 Verify Before Purchase Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 2004 – 2009 Not Compatible Land Rover Discovery Sport L550 2015 – 2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the central console area is free from dust, oils, or residue — use an IPA (isopropyl alcohol) wipe for best adhesion results. Dry-fit each trim piece to the gear panel surround before removing the adhesive backing, confirming alignment and orientation. Peel back the protective film from the double-sided adhesive on the first trim piece. Carefully position the trim piece flush against the gear panel frame, starting from one edge and pressing down firmly across the full surface. Apply sustained pressure for 30–60 seconds to activate the adhesive bond. Repeat for the second piece. Allow a minimum of 2 hours before exposing the trim to heat, moisture, or heavy contact to ensure a lasting bond. ⚠ Note: Do not apply in temperatures below 10°C — cold conditions can significantly reduce adhesive effectiveness. Ensure panel surfaces are at room temperature before installation. Upgrade Your Discovery 5 Interior Today Small details define great interiors. These gear panel frame covers are one of the simplest, most satisfying upgrades you can make to your Discovery 5 — no specialist tools, no downtime, and an immediately premium result. Explore the full Discovery 5 accessories range at Victorious Automotive. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks are referenced solely for fitment compatibility purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Chrome Air Conditioner Volume Knob Covers — Land Rover Discovery 3 LR3 (2004–2009) A precision-fit chrome upgrade that transforms the HVAC knob surrounds on your Discovery 3's dashboard into a polished, refined focal point — with zero permanent modification required. Discovery 3 · LR3 2004–2009 ABS Plastic Chrome Silver Finish Adhesive Fit ISO9001 Certified No Drilling Interior Trim Overview The Land Rover Discovery 3 — known globally as the LR3 — remains one of the most capable and characterful SUVs Land Rover has ever produced. Built between 2004 and 2009, the D3's interior was functional and well-considered for its era, but time has a way of dulling even the most robust cabins. The HVAC control panel in particular, with its array of rotary knobs, is one of those areas that can begin to look tired after years of daily use. These ABS chrome air conditioner volume knob covers are engineered specifically for the Discovery 3's climate control surround. Crafted from high-grade ABS plastic with a bright chrome silver finish, they slip over the existing knob surrounds to deliver an immediate visual uplift — the kind that makes the whole dashboard feel sharper, more modern, and more intentional. The result is a subtle but genuinely impactful transformation that Discovery 3 owners who care about their interior will immediately appreciate. Installation is entirely tool-free and reversible, relying on purpose-grade automotive adhesive tape to bond cleanly to the factory surface. There's no need to dismantle the dashboard, cut any panels, or visit a specialist — this is a genuinely achievable upgrade in under ten minutes, with results that look factory-fitted once in place. What's Included ✨ Chrome Knob Cover Set Full set of ABS chrome AC volume knob covers for the D3 climate panel 📋 Installation Guide Step-by-step instructions included in the box 🔧 Pre-Applied Adhesive Tape Automotive-grade double-sided tape for secure, clean bonding Product Highlights Precision-engineered fitment for Discovery 3 LR3 (2004–2009) HVAC controls High-grade ABS construction — resistant to heat, UV, and interior wear Bright chrome silver finish adds a premium, polished aesthetic Tool-free installation using pre-applied automotive adhesive tape Reversible fit — no permanent modification to the factory dashboard ISO9001 certified manufacturing for consistent quality assurance Lightweight at 300g — no structural impact on controls or knob function Dimensionally accurate — covers sit flush with zero gaps or misalignment Maintains full rotary knob operability after installation An ideal complement to other chrome interior trim upgrades on the D3 Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 3 LR3 2004–2009 Direct Fit Land Rover Discovery 4 LR4 2009–2016 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Time: 10–15 Minutes  ·  Tools Required: None Ensure your Discovery 3's HVAC knob surrounds are thoroughly clean and completely dry. Use an isopropyl alcohol wipe to remove any dust, oil, or residue for the strongest possible adhesive bond. Allow the surface to dry fully for at least two minutes before proceeding. Avoid touching the area once cleaned. Remove the protective backing from the pre-applied automotive adhesive tape on the reverse of each chrome cover. Carefully align each cover over the corresponding knob surround on the climate control panel, ensuring even positioning before making contact. Press each cover firmly and evenly for 30–60 seconds to activate the adhesive bond. Apply steady pressure across the full surface area. Allow the adhesive to cure for a minimum of 24 hours before operating the climate controls heavily or exposing the vehicle to extreme temperatures. ⚠ Important: Do not attempt installation on a damp, dusty, or recently polished surface — adhesion will be significantly reduced. These covers are designed exclusively for the Discovery 3 (2004–2009) HVAC panel. Verify your exact model year and trim variant before fitting. Do not force covers onto mismatched knob surrounds. Specifications Specification Detail Model Reference LLK2793 Material ABS Plastic Finish Chrome Silver Dimensions 10cm (H) × 30cm (L) × 15cm (W) Weight 300g Certification ISO9001 Fitment Type Adhesive — No drilling required Vehicle Fitment Land Rover Discovery 3 LR3 (2004–2009) Elevate Your Discovery 3 Interior Browse the full range of Discovery 3 interior upgrades at Victorious Automotive — curated specifically for LR3 owners who refuse to settle for a tired cabin. Questions? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop Discovery 3 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners. Always verify fitment against your specific vehicle's VIN and build specification before purchasing.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Chrome Inside Door Handle Decoration Covers — Land Rover Discovery 3 LR3 (2004–2009) A precise-fit chrome trim upgrade that instantly elevates the interior feel of your Discovery 3 — no drilling, no specialist tools, just a cleaner, more refined cabin. Discovery 3 / LR3 2004–2009 ABS Material Chrome Finish Interior Trim Adhesive Fit ISO9001 Certified No Drilling Overview The Land Rover Discovery 3 remains one of the most capable and characterful SUVs ever built — a vehicle that blends genuine off-road ability with a practical, family-friendly interior. But as these models age, the interior plastics can begin to look their years. Small upgrades to high-touch areas like door handles make a disproportionately large difference to how the cabin feels every single day. These chrome ABS door handle decoration covers are engineered specifically for the Discovery 3 LR3 (2004–2009), wrapping directly over the existing interior handle surrounds with a custom contour fit. Available in three finishes — Silver Chrome, Gloss Black, and Black Wood Grain — each variant adds a layer of visual refinement that complements both stock and modified Discovery 3 interiors. Manufactured from durable ABS plastic with an ISO9001-certified finish, these covers resist fading, cracking, and peeling over time. Installation is handled entirely via automotive-grade adhesive tape — no permanent modifications, no risk to original trim. It's the kind of detail that Land Rover owners who care about their vehicle will notice immediately. What's Included 🚪 Door Handle Cover Set Full set of chrome ABS decoration covers for all interior door handles 🔧 Automotive Adhesive Tape Pre-applied or included adhesive for secure, no-drill installation 📋 Installation Guide Step-by-step fitting instructions for a clean, accurate result Product Highlights Precision-engineered for Discovery 3 LR3 (2004–2009) — direct fit, no modification needed Available in Silver Chrome, Gloss Black, and Black Wood Grain finishes Durable ABS construction resists cracking, fading, and daily wear ISO9001-certified manufacturing for consistent quality and finish Adhesive-tape installation — no drilling, no permanent changes to OEM trim Covers high-touch surfaces that show the most wear over time Lightweight at just 200g — no impact on door mechanics or feel Works with both standard and upgraded Discovery 3 interior configurations Reversible upgrade — can be removed cleanly without damaging original trim Instant visual upgrade to one of the most-used areas of the cabin Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery 3 LR3 2004–2009 Direct Fit Land Rover Discovery 4 LR4 2009–2016 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean each interior door handle surround with an alcohol-based surface cleaner and allow to dry completely — any grease or moisture will reduce adhesive bond strength. Dry-fit each cover to its corresponding handle position without removing the adhesive backing — confirm alignment and orientation before committing. Peel the adhesive backing from the first cover and carefully press it into position, working from the centre outward to eliminate any air pockets. Apply firm, even pressure across the entire surface and hold for 30–60 seconds to activate the adhesive bond. Repeat for each remaining door handle cover, ensuring consistent alignment across all four doors. Allow the adhesive to cure for a minimum of 24 hours before subjecting the covers to heavy use or cleaning products. ⚠ Important: Do not install in temperatures below 10°C — cold surfaces significantly reduce adhesive performance. Avoid stretching or forcing covers during fitment, as this can stress the ABS material and affect the finish. Complete Your Discovery 3 Interior Browse the full range of Land Rover Discovery 3 interior and exterior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 3 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used for fitment reference purposes only.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim ABS Chrome Dashboard Centre Control Panel Cover Trim for Range Rover Evoque L551 (2020+) A precision-fit centre console trim piece that elevates the Evoque L551 interior with a polished chrome or carbon fibre aesthetic — no tools, no guesswork, no compromise. Evoque L551 2020–2024 ABS Chrome Carbon Fibre Finish Silver Finish Tool-Free Fit 3M Adhesive Interior Upgrade Direct Fit Overview The Range Rover Evoque L551 represents Land Rover's most urban, design-led proposition — a compact SUV built for those who refuse to sacrifice style for substance. Its interior is already a strong statement, but for owners who want every surface to reflect their attention to detail, the centre console area often remains an opportunity left unrealised. That changes here. This ABS Chrome Dashboard Centre Control Panel Cover Trim is engineered specifically for the 2020-onwards Evoque L551. Each piece is formed from high-grade ABS substrate with a chrome or carbon fibre surface finish, contoured to match the exact geometry of your centre control panel. The result is a seamless, factory-adjacent look that feels considered rather than aftermarket. Available in classic Silver Chrome or Carbon Fibre finish, this trim allows you to tailor the cabin aesthetic to your personal preference — whether you're drawn to the cool sophistication of chrome or the sporting edge of carbon. Installation is entirely adhesive-based using 3M bonding tape, meaning no drilling, no modifications, and no risk to your vehicle's original surfaces. What's Included 🪄 Centre Control Panel Trim 1 × ABS chrome panel, pre-cut to Evoque L551 spec 🔲 3M Adhesive Pre-Applied Factory-applied bonding tape on reverse face 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Engineered exclusively for the Range Rover Evoque L551 (2020 onwards) Premium ABS substrate with durable chrome or carbon fibre surface finish Available in Silver Chrome and Carbon Fibre colourways Pre-applied 3M automotive-grade adhesive for a clean, tool-free install Passes strict factory-level QC testing before despatch Contoured to precisely match OEM panel geometry — no gaps, no flex Does not interfere with any controls, vents, or electronic components Resistant to UV fading, heat distortion, and everyday interior wear Fully reversible — can be removed without damaging original trim Despatched worldwide via DHL, FedEx, UPS, and TNT Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 – 2024 Direct Fit Range Rover Evoque (1st Gen) L538 2011 – 2018 Not Compatible Range Rover Velar L560 2018 – 2023 Not Compatible Discovery Sport L550 2020 – 2024 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 Minutes  |  🔧 Tools Required: None Thoroughly clean the centre control panel surface with an isopropyl alcohol wipe and allow to dry completely — any residue or moisture will compromise adhesion. Hold the trim piece against the installation area without removing the adhesive backing. Confirm the fit, alignment, and orientation before committing. Using a heat gun or hair dryer, gently warm the 3M adhesive backing on the trim piece for 20–30 seconds. This activates the adhesive and significantly improves bond strength. Carefully peel the adhesive backing, align the trim precisely with the panel edges, and press firmly into position starting from the centre outward. Apply firm, even pressure across the entire surface for 60 seconds. Avoid disturbing the trim for at least one hour to allow full adhesive cure. ⚠ Important: Ensure the installation surface is clean, dry, and at room temperature before fitting. Do not install in cold or damp conditions as this will reduce adhesive performance. If in doubt, professional installation is recommended. Upgrade Your Evoque Interior Today Thousands of Range Rover owners trust Victorious Automotive for interior upgrades that look and feel like they belong. Join them — and make the most of your Evoque L551's cabin. Shop More Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Decorative Rear Trunk Hook Frame — Land Rover Defender 90 & 110 (2020+) A precision-engineered chrome accent frame that elevates the rear load area of your Defender with a factory-finish aesthetic — installed in minutes, built to last. Defender L663 2020–2026 ABS Chrome Direct Fit Peel & Stick Silver Finish 90 & 110 Interior Trim ISO9001 Certified Overview The Land Rover Defender L663 was re-engineered from the ground up as a modern icon — a vehicle that balances genuine off-road capability with an interior that commands respect. Owners of the 2020-onwards Defender understand that every detail matters, from the tactile feel of the dashboard materials to the finishing quality of the load area. It's a vehicle that rewards those who pay attention to the finer points. This ABS Chrome Rear Trunk Hook Frame is designed to complement that ethos precisely. Fitted around the rear trunk hook mounting points, the decorative frame transforms a functional but overlooked area of the load compartment into a refined, chrome-accented detail that looks entirely at home in the Defender's premium cabin environment. The silver chrome finish mirrors the quality of OEM interior brightwork, giving the impression it was always meant to be there. Manufactured from high-grade ABS plastic with a chrome-effect coating certified to ISO9001 quality standards, this trim piece offers real durability alongside its cosmetic appeal. The automotive-grade adhesive backing means there's no drilling, no modification, and no risk to your vehicle's interior — just a clean, confident upgrade that takes under ten minutes to complete. What's Included 🪝 Chrome Trunk Hook Frame 1x decorative ABS chrome frame — model LLK2618 🔧 Pre-Applied Adhesive Automotive-grade 3M-style tape pre-fitted to reverse 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut to match the Defender 90 and 110 rear trunk hook aperture exactly High-gloss chrome ABS finish replicates the quality of OEM interior brightwork Durable ABS construction resists impact, flex, and everyday wear in the load area No drilling or permanent modification — fully reversible installation Automotive-grade adhesive ensures a secure, long-lasting bond to factory trim ISO9001 certified manufacturing process for consistent quality and finish Lightweight at just 200g — adds visual presence without adding bulk Compatible with all Defender L663 variants from 2020 onwards Clean silver chrome tone complements both dark and light interior colour schemes Compact dimensions (30cm × 15cm × 10cm) for straightforward fitment in the trunk area Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Verify Before Order Land Rover Defender (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L494 / L461 Any Not Compatible Range Rover Vogue L405 / L460 Any Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔩 Tools Required: None Open the Defender's rear tailgate fully and locate the trunk hook mounting area you wish to accent with the decorative frame. Thoroughly clean the target surface using an isopropyl alcohol wipe or equivalent automotive surface prep solution. Remove all dust, grease, and moisture. Allow the surface to dry completely — at least 2–3 minutes at room temperature — before proceeding. Test-fit the chrome frame without removing the adhesive backing to confirm alignment and positioning against the hook surround. Peel back the adhesive protective liner from the reverse of the frame, taking care not to touch the adhesive surface. Carefully align the frame to the hook surround and press firmly into position, applying even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before subjecting the area to moisture, heavy loading, or extreme temperature changes. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F) as adhesive performance may be significantly reduced in cold conditions. For best results, install indoors or in a warm garage environment. Upgrade Your Defender, Detail by Detail At Victorious Automotive, we stock the accessories that make the difference — the pieces that show you take your Defender as seriously as Land Rover's engineers did. Browse our full Defender L663 collection or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for personalised advice. Shop All Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

```html Jaguar · E-Pace & Multi-Model · Exterior Trim ABS Chrome Door Handle Trim Set – Jaguar XE, XF, F-Pace & E-Pace Elevate your Jaguar's exterior with precision-engineered chrome door handle covers. Direct-fit styling in just minutes. E-Pace XE X760 XF X260 F-Pace X761 ABS Chrome 8pc Set Exterior Trim Overview Jaguar owners demand refinement in every detail. This chrome door handle trim set delivers the premium finish your E-Pace, XF, XE, or F-Pace deserves—combining sophisticated aesthetics with durable, weather-resistant engineering. The set includes eight precision-cut ABS chrome pieces that frame your door handles in elegant contrast. Each piece is engineered for exact fitment across Jaguar's contemporary lineup, transforming your vehicle's exterior presence without modification or permanent alteration. Whether you're refreshing a daily driver or maintaining concours-level presentation, this trim set represents practical luxury. Install in under 15 minutes with no tools required. The hardened ABS material resists UV fading, road salt, and thermal stress—keeping your Jaguar looking showroom-fresh for years. What's Included 🚪 Door Handle Covers 8× ABS chrome trim pieces ✨ Pre-Fitted Design Ready to install, no cutting 🛡️ UV & Salt Resistant Durable ABS material 📋 Installation Guide Step-by-step instructions Product Highlights Complete 8-piece set covers all door handles Premium ABS construction with chrome finish Direct fit—no modification required Installs in under 15 minutes Resistant to UV fading and road salt Enhances exterior elegance instantly OEM-quality precision engineering Compatible with all trim levels Non-permanent application Weather-tested durability Compatibility Jaguar Model Generation / Code Fit Status E-Pace All years Direct Fit XE X760 Direct Fit XF X260 Direct Fit F-Pace X761 Direct Fit Installation Difficulty: Beginner | Time: 10–15 minutes | Tools: None required Clean the door handle area with a damp cloth and allow to dry completely. Remove the adhesive backing from each chrome trim piece. Align the first trim piece carefully over the door handle frame. Press firmly for 5 seconds to ensure full contact and adhesion. Repeat steps 3–4 for all remaining pieces on all four doors. Allow adhesive to cure for 24 hours before touching handles. Inspect all seams for proper alignment and full contact. Note: Clean surfaces thoroughly with rubbing alcohol before application for maximum adhesion. Avoid installation in temperatures below 50°F or above 85°F. Elevate Your Jaguar Today Premium exterior detailing starts with thoughtful trim upgrades. This chrome door handle set delivers the refinement every Jaguar deserves—without compromise. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping ☎ +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Jaguar Cars Limited, or their parent companies. All vehicle names and model designations are the property of their respective manufacturers. This product is designed for aftermarket fitment only. ```

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Head Pillow Adjustment Button Cover Trim for Land Rover Defender 90 & 110 L663 (2020+) A precision-cut chrome accent trim that transforms the headrest adjustment controls of your Defender into a cohesive, premium detail — the finishing touch every thoughtfully specified interior deserves. Defender L663 2020+ ABS Chrome Direct Fit No Drilling Interior Trim Silver / Chrome ISO9001 Certified Model LLK2620 Overview The Land Rover Defender L663 is a vehicle that rewards attention to detail. From its purposeful exterior stance to its carefully considered interior layout, every surface contributes to the overall experience. But even from the factory, there are small opportunities to elevate — areas where a considered upgrade elevates the cabin from functional to genuinely refined. The headrest adjustment button surround is one of those moments. Factory-spec, it can look purely utilitarian against an otherwise well-appointed interior. This ABS Chrome Head Pillow Adjustment Button Cover Trim is engineered to address exactly that — cladding the button surround in a polished chrome-finish ABS fascia that harmonises with the metallic accents already present throughout the Defender's cabin architecture. Manufactured to ISO9001 quality standards and constructed from high-grade ABS, this trim is designed for durability as much as aesthetics. Installation requires no tools and no modification — a clean, confident upgrade that any Defender owner can complete in minutes, with results that look entirely factory-fitted. What's Included 🪞 Chrome Button Cover Trim x1 — ABS chrome-finish headrest adjustment surround 🔧 Automotive Adhesive Tape Pre-applied — strong bond, clean removal if needed 📄 Installation Guide Step-by-step fitment reference included Product Highlights Polished chrome ABS finish that mirrors factory metallic cabin accents Precision-cut for seamless integration with Defender 90 & 110 L663 headrests High-grade ABS construction — resistant to UV fading and cabin heat Pre-applied automotive-grade adhesive for a clean, tool-free install ISO9001 certified manufacturing for consistent quality assurance Lightweight at 200g — no impact on headrest function or adjustment Silver chrome colour complements both dark and light interior themes No drilling, cutting, or permanent modification required Instantly elevates the perceived quality of the rear and front headrest area Compatible with both Defender 90 and Defender 110 L663 variants Compatibility Model Variant Year Range Fitment Land Rover Defender 110 L663 — All Trims 2020 – 2026 Direct Fit Land Rover Defender 90 L663 — All Trims 2020 – 2026 Direct Fit Land Rover Defender 130 L663 — All Trims 2022 – 2026 Verify Before Ordering Range Rover Sport L494 All 2013 – 2022 Not Compatible Range Rover Vogue L405 All 2013 – 2021 Not Compatible Range Rover Velar All 2018 – 2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked and the interior at ambient temperature — avoid installation in extreme cold or direct sunlight, as this affects adhesive performance. Thoroughly clean the headrest adjustment button surround area using an isopropyl alcohol wipe. Remove all dust, oils, and residue. Allow to dry completely for at least 60 seconds. Dry-fit the chrome trim cover to the button surround before committing — confirm alignment, orientation, and clearance around the adjustment button itself. Peel back the protective film from the pre-applied adhesive tape on the reverse of the trim piece. Carefully align the trim to the surround and apply firm, even pressure for 30–60 seconds across the entire surface to activate the adhesive bond. Allow a minimum of 2 hours before applying any cleaning products to the area. Full adhesive cure is achieved after 24 hours. ⚠ Important: The automotive adhesive is strong and placement is largely permanent once bonded. Take your time with alignment during the dry-fit stage. Do not attempt to forcibly remove the trim after bonding, as this may affect the underlying surface finish. Complete Your Defender Interior This trim is part of a wider collection of precision interior upgrades designed exclusively for the Defender L663. Every piece is selected to integrate seamlessly — so your cabin looks considered, not modified. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Inner Door Handle Covers for Land Rover Defender 110 (2020–2026) L663 Elevate every touchpoint inside your Defender 110 with precision-moulded ABS chrome door handle covers — a subtle but impactful interior upgrade that sits perfectly alongside the cabin's industrial-premium aesthetic. Defender L663 2020–2026 ABS Chrome Interior Trim No-Drill Install Direct Fit Pearl Chrome Silver Carbon Fibre Overview The Land Rover Defender 110 L663 represents a complete reimagining of the iconic nameplate — blending rugged capability with a cabin that genuinely rewards attention to detail. From the bold door architecture to the chunky switchgear, the interior is designed to feel purposeful. These inner door handle covers work with that philosophy, adding a refined metallic or carbon contrast at one of the most frequently touched surfaces in the vehicle. Crafted from high-grade ABS plastic and finished in your choice of Pearl Chrome, Silver, or Carbon Fibre, these covers slip precisely over the existing door handle recesses across all four doors. The fitment is snug by design — shaped specifically to the Defender 110 L663's interior geometry — meaning there's no flex, no rattle, and no visible gaps once installed. The result looks factory-considered rather than aftermarket-added. Whether you're building out a full interior refresh or simply looking for a clean, low-effort upgrade to the standard black trim, these handle covers deliver a noticeable change in character. Paired with other cabin accessories from our Defender L663 collection, they form part of a cohesive interior transformation that doesn't compromise the vehicle's core identity. What's Included 🚪 4× Door Handle Covers Full set for all four doors — driver, passenger, rear left, rear right 🔧 Automotive Adhesive Tape Pre-cut 3M-grade tape included — no additional tools required 📋 Installation Guide Step-by-step instructions for a clean, confident fit Product Highlights Precision-moulded to the Defender 110 L663 interior door handle geometry Available in Pearl Chrome, Silver, and Carbon Fibre finishes High-grade ABS construction — impact and fade resistant No drilling, no cutting — fully adhesive installation Pre-applied automotive-grade adhesive tape included in the box Chrome finish adds warmth and contrast against the Defender's dark interior panels Carbon Fibre option complements sport-spec and blacked-out interior themes Covers all four doors — full cabin consistency from a single set 100% brand new — individually inspected before despatch Reversible upgrade — original handles remain fully intact underneath Compatibility Vehicle Code Years Trim Fitment Land Rover Defender 110 L663 2020–2026 All Trims (S, SE, HSE, X, X-Dynamic) Direct Fit Land Rover Defender 90 L663 2020–2026 All Trims Verify Before Ordering Land Rover Defender 130 L663 2022–2026 All Trims Verify Before Ordering Range Rover Vogue L460 / L405 2013–2026 All Trims Not Compatible Range Rover Sport L461 / L494 2013–2026 All Trims Not Compatible Range Rover Velar L560 2018–2024 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Begin with a clean, dry interior — park your Defender in a warm environment if possible, as adhesive bonds more effectively above 15°C. Using a microfibre cloth and isopropyl alcohol (IPA), thoroughly clean the door handle recess area on all four doors to remove any oils, dust, or wax residue. Allow the cleaned surfaces to dry completely for 2–3 minutes before proceeding. Trial-fit each cover without removing the adhesive backing to confirm correct orientation and alignment — the covers are shaped to sit flush with zero overhang. Peel the adhesive backing from the first cover and press firmly into position, applying sustained pressure across the full surface for 30–45 seconds. Repeat for all four door covers, working methodically around the cabin. Avoid operating the door handles under heavy load and keep the surfaces dry for a minimum of 72 hours to allow the adhesive to fully cure. ⚠ Important: Do not expose the freshly installed covers to rain, car wash, or excessive moisture for at least 72 hours post-installation. Surface temperature below 10°C may reduce initial adhesive strength — allow the vehicle to warm up indoors if installing in cold conditions. Complete Your Defender Interior These door handle covers are just the beginning. Explore our full range of Defender L663 interior accessories — designed, selected, and tested by Defender owners who understand what quality looks like at close range. Shop Defender L663 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase. If in doubt, contact our team at +44 203 943 9919 before ordering.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim ABS Chrome Interior Door Trim for Range Rover Evoque L551 2019–2020 — Without Memory Button A precision-fit set of four chrome door decoration trims that elevate the cabin ambience of your Evoque L551 with a clean, contemporary silver finish — no modification required. Evoque L551 2019–2020 ABS Chrome Without Memory Button Set of 4 Direct Fit Adhesive Install Silver Finish Overview The second-generation Range Rover Evoque (L551) was a significant step forward for Land Rover — sharper styling, a more refined interior architecture, and an elevated standard of cabin quality that owners rightly take pride in. It's a vehicle that rewards attention to detail, and the door panel area is one of the most-touched, most-noticed surfaces inside the cabin every single day. These ABS Chrome Interior Door Trims are designed from the ground up for the 2019–2020 Evoque L551, specifically for vehicles specified without the memory seat button. Each piece is formed from high-grade ABS plastic with a polished chrome-effect silver finish that harmonises with the Evoque's existing interior brightwork — blending in naturally rather than standing out as an aftermarket addition. The result is a more cohesive, premium-looking door panel that feels as though it left the factory that way. Installation is entirely adhesive-based, using automotive-grade double-sided tape that bonds reliably to the door panel surface without drilling, cutting, or removing any trim. This is a genuine quality-of-life upgrade that takes minutes to fit and delivers a lasting visual improvement every time you open the door. What's Included 🪟 Chrome Door Trim × 4 One piece per door — full set for all four doors 🔧 Pre-Applied Adhesive Tape Automotive-grade bonding — no additional hardware needed 📋 Installation Guidance Step-by-step instructions for a clean, confident fit Product Highlights Precision-engineered for Evoque L551 2019–2020 without memory button High-gloss ABS chrome finish matches factory interior brightwork Full set of four trims — all doors covered in one purchase Pre-applied automotive adhesive tape for tool-free installation Durable ABS construction resists warping, cracking, and UV fade Lightweight at 400g total — no door mechanism impact Silver chrome tone complements both dark and light interior colour schemes Reversible installation — can be removed cleanly if required No drilling, cutting, or panel removal required Immediate visual upgrade to one of the most-used surfaces in the cabin Specifications Specification Detail Material ABS Plastic with Chrome Finish Colour Silver Chrome Item Length 46 cm Item Width 10 cm Item Height 8 cm Item Weight 400 g Quantity 4 pieces (full set) Fitment Type Direct Fit — adhesive mount Compatibility Vehicle Generation Years Trim Variant Fitment Range Rover Evoque L551 2019 Without Memory Button Direct Fit Range Rover Evoque L551 2020 Without Memory Button Direct Fit Range Rover Evoque L551 2019–2020 With Memory Button Not Compatible Range Rover Evoque L538 (1st Gen) 2011–2018 All Not Compatible Range Rover Evoque L551 2021+ All Verify Before Purchase Not sure which specification your Evoque is? Check your door panel around the seat adjustment controls — if there is no memory seat button present, this set is the correct fitment. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–25 minutes  ·  🔩 Tools Required: None Begin with all four door panels at room temperature. Cold surfaces can reduce initial adhesive bond strength — if your vehicle has been parked outdoors in cold weather, allow the interior to warm up for 10–15 minutes before starting. Thoroughly clean each door panel mounting area using an isopropyl alcohol wipe or clean microfibre cloth. Remove any dust, grease, or residue entirely and allow the surface to dry completely. Dry-fit each trim piece to its corresponding door panel to confirm alignment and positioning before removing the adhesive backing. Note any trim clips or panel edges that may affect final placement. Peel the adhesive backing from the first trim piece. Align carefully with the door panel — starting from one end and pressing firmly along the full length to eliminate air gaps and ensure full surface contact. Apply firm, even pressure across the entire trim for 30–60 seconds. This activates the adhesive bond and ensures a secure, lasting fit. Repeat for all four door trims. Avoid applying significant force or stress to the trims for at least 24 hours to allow the adhesive to fully cure. ⚠ Important: These trims are specifically designed for Range Rover Evoque L551 models without the memory seat button. Attempting to fit these trims on a vehicle with the memory button feature will result in incorrect fitment. If you are unsure of your vehicle's specification, please contact our team before ordering — we're happy to help confirm compatibility. Upgrade Your Evoque Interior Today Browse our full collection of Range Rover Evoque L551 accessories and find everything you need to personalise and protect your vehicle — curated by enthusiasts, trusted by owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Chrome Rear Headlight Top Knob Cover for Land Rover Discovery 3 A precision-moulded chrome trim cover that elevates the headlight switch surround on your Discovery 3 — finishing the interior with a cleaner, more considered look. Discovery 3 (L319) Interior Trim ABS Chrome Silver Finish Adhesive Fit No Drilling Required OEM-Style Integration 2004–2009 Overview The Land Rover Discovery 3 — known globally as the LR3 — remains one of the most capable and characterful SUVs ever produced. Its interior was a significant step forward for Land Rover at the time, but over years of use, the smaller trim details around the headlight knob area can begin to show their age. This is where considered, well-made trim upgrades make a genuine difference to the feel of the cabin. This ABS chrome rear headlight top knob cover has been designed specifically for the Discovery 3's centre console and headlight switch cluster. Manufactured from high-quality ABS plastic with a polished chrome-effect finish, it sits cleanly over the existing switch surround, introducing a reflective, premium layer that feels deliberately factory rather than aftermarket. The silver tone complements both light and dark interior colourways without clashing against OEM materials. Installation is entirely non-invasive. The cover is pre-backed with automotive-grade adhesive tape, meaning no drilling, no modifications, and no irreversible changes to your vehicle. For Discovery 3 owners who want to refresh the interior without a full retrim, this is a smart, low-effort upgrade that delivers an immediate visual return. What's Included ✦ Chrome Knob Cover ABS chrome rear headlight top cover, pre-cut and shaped for Discovery 3 🔧 Pre-Applied Adhesive Automotive-grade double-sided tape pre-fitted to reverse of cover 📄 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Precision-moulded ABS construction for a consistent, gap-free fit Polished chrome-effect finish adds visual depth to the switch cluster Pre-applied automotive adhesive tape — no tools or drilling required Designed specifically for the Discovery 3 headlight knob surround Durable finish resistant to UV fading and everyday interior wear Silver tone complements both light and dark Discovery 3 interiors Clean OEM-inspired aesthetic — looks considered, not aftermarket Lightweight construction — no impact on switch operation or ergonomics Non-destructive fit — fully reversible with no damage to original trim Simple DIY install completable in under 10 minutes at home Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 3 L319 2004–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Verify Before Purchase Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L322 L322 2002–2012 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the headlight switch surround and surrounding trim surfaces are free from dust, grease, or moisture. Use an isopropyl alcohol wipe or clean dry cloth to thoroughly degrease the mounting surface on the headlight knob surround area. Allow to dry fully before proceeding. Test-fit the chrome cover without removing the adhesive backing to confirm correct orientation and alignment against the switch cluster. Peel the protective film from the pre-applied automotive adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface. Carefully align the cover over the headlight knob surround and press down firmly and evenly across the full surface for 30–60 seconds to ensure a strong bond. Allow the adhesive to cure for a minimum of 24 hours before exposing the cover to heat, cleaning products, or direct sunlight for best long-term adhesion. ⚠ Important: Do not attempt installation on a cold or damp surface — adhesive performance is significantly reduced below 10°C. Allow your vehicle's interior to reach room temperature before fitting. If in doubt, contact us on +44 203 943 9919 before installation. Upgrade Your Discovery 3 Interior Small details define a well-kept cabin. Explore our full range of Discovery 3 interior accessories and give your Land Rover the finish it deserves. Shop Discovery 3 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Please verify compatibility with your specific vehicle configuration before purchase.

Victorious · Range Rover Evoque L551 · Exterior Trim ABS Chrome Rear Trunk Handle Frame Trim – L551 Elevate your Evoque's tailgate with a premium chrome accent trim that's durable, beautifully finished, and installed in minutes. L551 2019–2020 ABS Material Chrome Finish Self-Adhesive No Tools Required Overview The 2019–2020 Range Rover Evoque L551 deserves details that match its refined character. This ABS Chrome Rear Trunk Handle Frame Trim transforms a functional piece into a statement element, catching light and adding visual depth to your tailgate. Manufactured from premium ABS plastic with a mirror-chrome or carbon fiber finish, this trim piece frames the trunk handle with understated elegance. The automotive-grade adhesive ensures a permanent, secure bond without drilling or fasteners—no permanent modification to your vehicle. Whether you're refining your Evoque's exterior or completing a broader customisation programme, this trim delivers the fit, durability, and presence that separates thoughtful owners from casual buyers. What's Included 📦 Rear Trunk Trim Frame Single-piece ABS component 🔧 Pre-Applied Adhesive Tape 3M automotive-grade backing 📋 Installation Guide Step-by-step photo instructions 💼 Victorious Packing Protective transit box Product Highlights Premium ABS construction with real chrome or carbon fibre finish Perfectly engineered for 2019–2020 L551 Evoque tailgate Pre-applied 3M automotive adhesive—no tools or expertise needed Dual finish options: polished silver or weave carbon fibre Lightweight at 200g—zero impact on performance Dimensions: 300mm L × 100mm W × 50mm H ISO9001 certified manufacturing process Resists UV fade and weather degradation 5-minute installation with minimal surface prep 30-day money-back guarantee—fit or return risk-free Compatibility Model Year Variant Status Range Rover Evoque 2019 All trim levels (L551) Direct Fit Range Rover Evoque 2020 All trim levels (L551) Direct Fit Range Rover Evoque 2021+ All variants Not Compatible Range Rover Evoque 2018 and earlier (L538) All variants Not Compatible Note: This trim is engineered exclusively for L551 platform (2019–2020). Fitment on adjacent model years or generation prior (L538) is not guaranteed and not recommended. Installation Difficulty: Very Easy | Time: 5–10 minutes Clean the surface. Use rubbing alcohol or a dedicated automotive cleaner on the rear trunk handle area. Wipe dry with a lint-free cloth and allow 5 minutes of air-drying. Peel the backing. Gently peel away the protective backing from the pre-applied adhesive tape on the trim piece. Avoid touching the adhesive. Align and press. Position the trim frame over the trunk handle, ensuring symmetrical placement. Press firmly from one end to the other, applying even pressure for 10 seconds. Secure bond. Allow the adhesive to cure for 24 hours before exposure to water or extreme temperature. Important: Surface temperature should be between 15–25°C during installation. Do not install in direct sunlight or on a wet surface. Allow the adhesive full cure time (24 hours) before washing the vehicle. Why Victorious We specialise in Range Rover and Land Rover finishing pieces. Every product is tested for fitment, durability, and finish quality before it ships. Our 4.9/5-star rating from over 12,300 verified owners reflects our commitment to detail. If you have any questions about fitment, finish options, or installation, our team is available Monday–Friday, 9am–7pm (GMT) at +44 203 943 9919. Worldwide shipping via DHL, FedEx, UPS, and TNT. Add Polish to Your Evoque Great exterior trim is about intention. This chrome rear trunk frame tells your Evoque's story—one of care and refinement. Ready to upgrade? Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping included ✓ UK support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or an official division of Jaguar Land Rover, the Range Rover brand, or their parent company. All vehicle names and logos are registered trademarks of their respective manufacturers. This product is designed to enhance and personalise your vehicle and does not alter its safety or structural integrity.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Rear Trunk Trailer Button Frame Trim for Land Rover Defender 110 L663 (2020+) A precision-formed chrome frame trim that elevates the Defender 110's rear loading area with a polished, factory-coherent finish — fitted in minutes, no tools required. Defender L663 2020–2026 ABS Chrome Trailer Button Frame Rear Trunk Trim 3 Colour Options Adhesive Fit ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that demands accessories worthy of its character — purposeful, considered, and built to last. Every detail on the Defender has been resolved with intent, and the area surrounding the rear trunk trailer button is no exception. Left unfinished from the factory, it's a small but visible detail that enthusiast owners notice. This Rear Trunk Trailer Button Frame Trim is designed exclusively for the 2020-onwards Defender 110 L663. Formed from high-grade ABS and finished in either Pearl Chrome, Silver, or Oak Wood Grain, it frames the trailer coupling button recess with a clean, layered look that integrates naturally with the Defender's existing interior trim language. The result is a rear loadspace that looks considered from every angle — even when the tailgate is open and your kit is loaded. At just 17g, this trim adds zero meaningful weight while delivering a noticeable visual upgrade. The automotive-grade adhesive backing ensures a secure, rattle-free bond to the factory panel surface. If you're building out your Defender's interior to the standard it deserves, this is one of those small pieces that makes the whole look cohesive. What's Included 🔲 Rear Trunk Trailer Button Frame Trim 1 piece · ABS Chrome finish · pre-taped 🔧 Automotive Adhesive Tape Pre-applied to reverse face · strong bond 📋 Installation Guide Step-by-step fitment reference included Product Highlights Designed exclusively for the Land Rover Defender 110 L663 (2020 onwards) High-grade ABS construction — resistant to warping, UV, and temperature change Available in Pearl Chrome, Silver, and Oak Wood Grain finishes Pre-applied automotive adhesive tape for a clean, tool-free installation ISO9001 certified manufacturing — consistent quality across every unit Lightweight at just 17g — no structural or weight implications whatsoever Precise fitment to the factory trailer button recess — no trimming required Rattle-free bond when correctly applied to a clean, dry panel surface Complements other chrome or wood grain interior trim on the L663 100% brand new — not a refurbished or repackaged item Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Open the Defender 110 tailgate fully and locate the trailer coupling button recess on the rear interior panel. Thoroughly clean the panel surface around the button recess using an isopropyl alcohol wipe or similar degreaser. Allow to dry completely — adhesion depends on a clean, grease-free surface. Test-fit the trim piece without removing the adhesive backing to confirm alignment and positioning before committing. Peel the adhesive backing from the reverse of the trim piece carefully, ensuring the tape remains flat and undistorted. Align the trim precisely over the button recess and press firmly from the centre outward, applying sustained pressure for 30–60 seconds across the full surface. Allow the adhesive to cure for a minimum of 24 hours before exposing to moisture, extreme temperatures, or heavy use. ⚠ Note: Confirm fitment compatibility with your specific Defender variant before purchase. The button recess geometry may differ between 90, 110, and 130 body styles. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm before you order. Complete Your Defender's Interior This trim is one part of a wider collection of Defender L663 interior accessories at Victorious. Browse the full range — from door handle surrounds to dashboard bezels — all held to the same standard your Defender deserves. Shop Defender L663 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Land Rover Discovery 4 · Exterior Trim ABS Chrome Rear Window Wiper Nozzle Cover Trim — Land Rover Discovery 4 LR4 (2010–2016) A precision-fitted chrome nozzle cover trim that adds a polished, factory-refined finish to the rear wiper assembly of your Discovery 4 — no drilling, no fuss. Discovery 4 LR4 2010–2016 ABS Chrome Exterior Trim Adhesive Fit Rear Wiper 2-Piece Set No Drilling Overview The Land Rover Discovery 4 LR4 is a vehicle that commands presence — a no-compromise SUV built for those who demand capability without sacrificing refinement. Whether it's navigating urban streets or challenging terrain, every detail of the D4 contributes to its commanding character. The exterior deserves the same level of attention that Land Rover put into its engineering. This chrome rear window wiper nozzle cover trim is crafted from high-grade ABS plastic with a silver chrome finish, designed to seamlessly cover and enhance the rear wiper nozzle area — one of the few exterior details that often goes overlooked. The mirror-like chrome surface integrates naturally with the Discovery 4's existing trim lines, elevating the overall aesthetic without appearing aftermarket. Installation requires nothing more than a clean surface and the included double-sided adhesive — no tools, no modifications, no compromise to your vehicle's bodywork. It's a subtle upgrade with an immediate visual impact, particularly appreciated by owners who take pride in every inch of their Discovery. What's Included ✦ Chrome Nozzle Cover Trim ×2 ABS chrome-finished rear wiper cover pieces 🔧 Pre-Applied Adhesive Double-sided tape pre-fitted for easy install 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-formed ABS plastic for long-term structural integrity High-gloss silver chrome finish resists fading and tarnishing Specifically designed for Discovery 4 LR4 wiper nozzle geometry Double-sided adhesive backing ensures a firm, lasting bond No drilling, cutting, or permanent modification required 2-piece set provides full coverage of the rear nozzle area Complements existing chrome exterior trim on the Discovery 4 100% brand new — manufactured in a quality-certified facility Lightweight construction adds no meaningful weight to the tailgate Weather-resistant finish suitable for all climates and conditions Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Not Confirmed Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Thoroughly clean the rear wiper nozzle area using an alcohol-based surface cleaner or isopropyl wipe. Remove any wax, grease, or road grime to ensure maximum adhesion. Allow the surface to dry completely before proceeding. Do not apply in temperatures below 10°C / 50°F — the adhesive performs best in moderate to warm ambient conditions. Test-fit both trim pieces against the nozzle area without removing the adhesive backing to confirm correct positioning and alignment. Peel back the adhesive protective film from the first piece and carefully align it to the nozzle. Press firmly for 30–60 seconds, applying even pressure across the full surface. Repeat for the second piece. Once applied, avoid washing the vehicle or exposing the trim to sustained water pressure for at least 24 hours to allow the adhesive to cure fully. ⚠ Note: Ensure both pieces are correctly positioned before pressing firmly — repositioning after adhesive contact may reduce bonding strength. If in doubt, use a mild heat gun on the lowest setting to slightly warm the adhesive before final placement for improved flexibility. Explore the Full Discovery 4 Collection This chrome trim is just one of dozens of precision accessories available for the Land Rover Discovery 4. Browse the complete range at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.