Best selling products

Victorious Automotive · Range Rover Sport L461 / Vogue L460 · Interior Trim ABS Carbon Fibre & Black Dash Surround Frame — Range Rover Sport L461 & Vogue L460 (2023–2024) A precision-fitted dashboard surround trim that elevates the interior aesthetic of the new-generation Range Rover Sport L461 and Vogue L460 with a sharp carbon fibre or gloss black finish — zero modification required. Range Rover Sport L461 Range Rover Vogue L460 2023–2024 ABS Material Carbon Fibre Finish Gloss Black Direct Fit No Drilling ISO9001 Certified Overview The Range Rover Sport L461 and Vogue L460 represent Land Rover's most refined interior design to date — a cabin built around clean lines, premium materials, and an unmistakable sense of purpose. For owners who want to take that interior one step further, the details matter enormously. The dashboard surround is one of the most visually prominent surfaces in the cabin, and upgrading it makes an immediate and lasting impression. This ABS carbon fibre and black dash surround frame is designed and manufactured exclusively for the 2023–2024 Range Rover Sport L461 and Vogue L460. Precision-moulded to the exact contours of the factory dashboard, it slots seamlessly into place without any cutting, drilling, or professional installation. The carbon fibre weave finish adds depth and texture to the cabin, while the gloss black option delivers a bold, understated elegance that complements the Sport's darker interior trims particularly well. Produced in an ISO9001-certified facility, the ABS construction offers genuine scratch and wear resistance — this isn't a decorative piece that fades or chips with daily use. Whether you're speccing up a new delivery or refreshing a current vehicle, this trim is a considered, well-executed upgrade that looks factory-fitted from day one. What's Included 🖼️ Dashboard Surround Frame × 1 Full dash trim piece in chosen finish 🔖 Pre-Applied 3M Adhesive Double-sided tape pre-fitted to rear 📦 Retail Packaging Boxed and protected for safe delivery 📋 Fitment Guide Basic installation reference included Product Highlights Precision-moulded for the L461 Sport and L460 Vogue dashboard contours High-grade ABS construction — rigid, durable, and lightweight Carbon fibre weave or gloss black finish options available Pre-applied 3M-grade double-sided adhesive for clean installation Scratch and abrasion-resistant surface coating No drilling, cutting, or permanent modification required Manufactured in an ISO9001-certified production facility 100% new — supplied in branded retail box Fully reversible installation — remove without damage to OEM surfaces Seamless OEM-style fitment — looks factory-fitted once installed Compatibility Vehicle Model Code Year Range Fitment Range Rover Sport L461 2023 – 2024 Direct Fit Range Rover Vogue L460 2023 – 2024 Direct Fit Range Rover Sport L494 2013 – 2022 Not Compatible Range Rover Vogue L405 2013 – 2021 Not Compatible Range Rover Defender L663 2020 – 2024 Not Compatible Range Rover Velar L560 2018 – 2024 Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 15–25 Minutes  |  🔧 Tools Required: None Thoroughly clean the factory dashboard surround surface with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesion and a clean bond. Dry-fit the trim piece against the dashboard without removing the adhesive backing to confirm the fit, alignment, and coverage before committing to installation. Carefully peel back a small section of the adhesive liner. Align one edge of the trim to the dashboard and press firmly into position, slowly peeling the remaining liner as you work across the panel. Once positioned, apply firm and even pressure across the entire surface of the trim for 30–60 seconds to activate the adhesive bond and eliminate any air pockets. Allow the adhesive to cure at room temperature for a minimum of 2–4 hours before exposing the vehicle to rain, car washes, or extreme temperature changes. ⚠ Important: Please verify your exact model code (L461 or L460) and production year before ordering. Dashboard specifications may vary between early and late production runs within the 2023–2024 range. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Shop the Full L461 & L460 Interior Collection This dash trim is just one piece of the picture. Browse our complete interior upgrade range for the new Range Rover Sport L461 and Vogue L460 — from door handle surrounds to centre console trims, all precision-fitted and ready to install. Shop Range Rover Sport L461 → Shop Range Rover Vogue L460 → Buying 2 or more items? Use code 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover L460 / L461 · Interior Styling Carbon Fibre Style Gear Shifter Cover — Range Rover Sport L461 & Vogue L460 (2023–2024) A precision-fitted carbon fibre style trim that elevates the gear shifter surround of your new-generation Range Rover with a sportier, more refined finish — no drilling, no tools, no compromise. Range Rover Sport L461 Range Rover Vogue L460 2023–2024 Carbon Fibre Style ABS Material Peel & Stick Interior Trim No Tools Required Overview The fifth-generation Range Rover Vogue (L460) and the new Range Rover Sport (L461) represent the most refined expressions of Land Rover's design philosophy — a cabin that blends architectural minimalism with cutting-edge technology. Every surface is intentional, and for owners who want to push that interior aesthetic further, the gear shifter surround is one of the most tactile and visually prominent focal points in the console. This Carbon Fibre Style Gear Shifter Cover is designed from the ground up for the 2023–2024 L460 and L461 platforms. Crafted from high-quality ABS with a precisely applied carbon fibre pattern finish, it introduces a purposeful, performance-oriented character to your console without altering any original components. The result is a subtle but immediately noticeable upgrade that sits naturally within the vehicle's premium environment. Installation requires no specialist tools, no adhesive preparation beyond cleaning the surface, and no risk to original trim. The 3M-grade peel-and-stick mounting system ensures a secure, flush bond that is fully reversible — ideal for those who want the look without permanence. Whether you own a Sport in Dynamic specification or a Vogue in its most luxurious trim, this cover delivers a consistent, cohesive result. What's Included 🎯 Gear Shifter Cover × 1 Carbon fibre style ABS trim, pre-fitted with adhesive backing 🧽 Installation Guidance Surface prep and fitment instructions included Product Highlights Precision-engineered fitment for L460 and L461 gear shifter surrounds Carbon fibre weave pattern finish for a premium, motorsport-inspired aesthetic Manufactured from durable high-grade ABS plastic for long-term resilience Pre-applied peel-and-stick adhesive — no drilling or permanent modifications Flush, factory-like finish that integrates seamlessly with original trim Lightweight construction adds no perceptible weight to the console Compatible with all trim levels across the L460 and L461 range Fully reversible — original trim remains undamaged beneath Resistant to daily wear, UV exposure, and interior temperature fluctuation Brand new, boxed condition — ready to install upon delivery Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Sport L461 2023–2024 Direct Fit Range Rover Vogue L405 2013–2022 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Ensure the interior of your vehicle is at room temperature — avoid installation in cold or damp conditions, as this can affect adhesive performance. Clean the gear shifter surround thoroughly using a lint-free microfibre cloth. Remove any dust, grease, or residue from previous products. Allow the surface to dry completely. Dry-fit the carbon fibre cover over the gear shifter surround before committing, to confirm correct alignment and positioning. Peel back the protective film on the adhesive layer carefully, taking care not to contaminate the adhesive surface. Align the cover precisely over the gear shifter surround, working from one end to the other to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure a strong bond between the cover and the original trim. Allow the adhesive to cure for a minimum of 1 hour before normal use of the gear selector. ⚠ Note: Do not attempt installation on a wet, oily, or recently polished surface. Avoid using chemical cleaners directly on the carbon fibre finish, as harsh solvents may dull the pattern over time. A damp microfibre cloth is sufficient for routine cleaning. Explore the Full L460 & L461 Interior Collection This gear shifter cover is just the beginning. Victorious Automotive stocks a full range of precision-fit interior trim upgrades for the new Range Rover and Range Rover Sport — from dashboard overlays to door panel accents, all engineered to match the standards your vehicle demands. Shop Range Rover Sport L461 → Shop Range Rover Vogue L460 → Buying two items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced (including Range Rover, Range Rover Sport, L460, L461) are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase. If in doubt, contact our team on +44 203 943 9919.

Victorious Automotive · Defender L663 · Interior Trim Real Carbon Fiber Dashboard Panel for Land Rover Defender L663 (2020–2022) Genuine woven carbon fiber trim panels that elevate the Defender's interior with a motorsport-grade finish — no cutting, no wiring, no workshop required. Defender L663 2020–2022 Real Carbon Fiber Dashboard Trim Left-Hand Drive Adhesive Fit Set of 3 Panels Interior Upgrade Overview The Land Rover Defender L663 brought an entirely new generation of this iconic nameplate — one that marries serious off-road capability with a genuinely premium cabin. Whether you're in a base Defender 90 or a fully loaded 110 X-Edition, the interior is purposeful and modern. But for owners who want to take things a step further, the factory plastic dashboard trim leaves room for a meaningful upgrade. These real carbon fiber dashboard panels are precision-cut to follow the exact contours of the Defender L663's centre fascia and dash surround. Unlike imitation carbon wrap or ABS-printed alternatives, each panel features genuine woven carbon fiber construction — the same material used across motorsport and high-performance road cars. The result is an interior detail that rewards close inspection: visible weave texture, deep gloss finish, and a tactile quality that plastic simply cannot replicate. Designed specifically for left-hand drive L663 Defenders, the fitment is exact. The panels overlay directly onto the factory surfaces with professional-grade double-sided adhesive, creating a seamless, flush integration that looks factory-fit from day one. No specialist tools, no permanent modification, no dealership visit required. What's Included 🪟 Centre Dashboard Panel Main fascia surround, real carbon fiber weave 🪟 Secondary Dash Panel Complementary trim piece for full coverage 🪟 Accent Trim Panel Third panel completing the dashboard set 🔲 Pre-Applied Adhesive 3M-grade double-sided tape on each panel 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine woven carbon fiber — not ABS printed or vinyl wrapped Precision die-cut for exact fit on Defender L663 dashboard High-gloss protective clear coat over carbon weave surface Pre-applied 3M-grade adhesive on every panel for reliable bond Designed exclusively for left-hand drive L663 variants Covers 3 key dashboard zones for a cohesive, complete upgrade Lightweight construction — adds zero perceptible weight UV-resistant finish prevents yellowing or fading over time No drilling, cutting, or permanent modification required Compatible with both Defender 90 and Defender 110 body styles Compatibility Model Year Range Drive Fitment Defender 90 (L663) 2020–2022 Left-Hand Drive Direct Fit Defender 110 (L663) 2020–2022 Left-Hand Drive Direct Fit Defender 130 (L663) 2022+ Left-Hand Drive Verify Before Purchase Defender 90 (L663) 2020–2022 Right-Hand Drive Not Compatible Defender 110 (L663) 2020–2022 Right-Hand Drive Not Compatible Defender 90/110 (L316) Pre-2020 Any Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean all dashboard surfaces where panels will be applied using an isopropyl alcohol wipe. Remove any dust, grease, or polish residue and allow to dry fully. Dry-fit each carbon fiber panel to its corresponding dashboard position before applying. Confirm alignment and check that all cutouts and edges line up precisely with the factory trim. Beginning with the centre panel, peel back the protective film from the pre-applied adhesive. Carefully position the panel and press firmly from the centre outward to eliminate any air pockets. Repeat for the remaining two panels, working methodically across the dashboard. Apply firm, even pressure along all edges for a secure bond. Allow the adhesive to cure for a minimum of 24 hours before exposing the interior to extreme temperature changes or direct sunlight for prolonged periods. ⚠ Important: These panels are designed for left-hand drive L663 Defenders only. Attempting to fit right-hand drive panels will result in misalignment. If in doubt about your vehicle's specification, contact our team before installation on +44 203 943 9919. Upgrade Your Defender's Interior Today Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium, precision-fit interior accessories. Browse the full Defender L663 collection for more ways to personalise your cabin. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Interior Trim Carbon Fiber Central Console Panel Trim for Land Rover Defender 110 L663 (2020–2021) Real carbon fiber construction with a peel-and-stick fit — a clean, purposeful upgrade to one of the Defender's most visible interior touchpoints. Defender L663 2020–2021 Real Carbon Fiber 110 Wheelbase Central Console Trim Self-Adhesive Fit Interior Upgrade No Drilling Required Overview The 2020–2021 Land Rover Defender 110 L663 marked a defining moment in the Defender's history — a vehicle that balanced modern engineering with unmistakable character. The interior reflects that ambition, but for owners who want to push the cabin one step further, the central console area presents an obvious opportunity. It's a high-visibility zone, touched constantly and seen immediately by anyone who steps inside. This Real Carbon Fiber Central Console Panel Trim is designed specifically for the Defender 110 (2020–2021) interior layout, covering the console panel with precision-cut genuine carbon fiber that sits flush against the factory surface. The weave pattern is consistent and tightly finished, lending the kind of texture and depth that aftermarket plastic overlays simply cannot replicate. The result is a subtle but unmistakable elevation — one that reads as considered rather than accessorised. Installation requires no tools, no modification, and no permanent alteration to the vehicle. The trim arrives pre-backed with automotive-grade adhesive tape, the same category used across professional-fit interior applications. Clean the surface, peel the backing, and align carefully — the entire process takes minutes. For Defender owners who value the vehicle's integrity as much as its appearance, this is precisely the kind of upgrade worth making. What's Included 🪶 Carbon Fiber Console Trim 1 × real carbon fiber panel, pre-cut to fit 🔲 Pre-Applied Adhesive Tape Automotive-grade, factory-bonded to reverse side 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine real carbon fiber construction — not vinyl wrap or ABS plastic Consistent 2×2 twill weave pattern with high-gloss resin finish Precision-cut for exact fitment on Defender 110 L663 (2020–2021) Pre-applied automotive-grade 3M-style adhesive tape on reverse Tool-free, no-drill installation — completely reversible Lightweight material — adds zero meaningful weight to the cabin Resistant to heat, UV fading, and interior wear over time Colour-fast finish that won't yellow or peel under normal use Seamlessly integrates with factory Defender interior aesthetics Compatible with both standard and upgraded Defender 110 interior trims Compatibility Model Code Year Range Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Not Compatible Land Rover Defender 110 L663 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None Park your Defender 110 in a clean, dry environment at room temperature. Cold or humid conditions can compromise adhesive bonding. Thoroughly clean the central console panel surface using an isopropyl alcohol wipe or equivalent. Remove all dust, grease, and residue and allow to dry completely. Test-fit the carbon fiber trim panel against the console surface without removing the adhesive backing. Confirm alignment and panel coverage before committing. Peel back a small section of the adhesive liner from one edge of the trim. Carefully align that edge with the console panel and press firmly into position. Slowly peel the remaining liner away while pressing the trim down progressively across its full length. Work from one edge to avoid air pockets. Apply firm, even pressure across the entire surface for 30–60 seconds. Pay particular attention to corners and edges to ensure full adhesion. Allow the adhesive to cure for a minimum of 24 hours before exposing the trim to direct heat, direct sunlight, or cleaning products. ⚠ Important: Do not attempt installation on a cold or freshly cleaned surface that has not fully dried. Adhesive performance is significantly reduced below 15°C (59°F). If the trim requires repositioning, work carefully to avoid stretching or creasing the carbon fiber panel. Complete Your Defender Interior This trim is one of the most immediate upgrades you can make to the Defender 110 cabin — real material, proper finish, zero compromise. Browse the full Defender L663 interior collection to find everything designed to the same standard. Shop Defender 110 (2020–2021) Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque · Interior Lighting Interior LED Light Kit for Range Rover Evoque – Full Cabin Upgrade (2005–2023) Transform every journey inside your Evoque with a precisely engineered LED interior kit — brighter, cleaner light across every cabin zone, with zero error codes and no rewiring required. Range Rover Evoque L538 · L551 2005–2023 Canbus Error Free Plug & Play 50,000hr Lifespan Heat Resistant Direct Fit Overview The Range Rover Evoque has always stood apart for its design-led interior — low roofline, premium surfaces and a cabin built to impress. But the factory halogen interior bulbs do very little to complement that effort. They cast a dim, warm-yellow light that dates the interior and leaves door pockets, boot areas and vanity mirrors barely usable in low-light conditions. This LED kit is the single most effective low-cost upgrade you can make to the Evoque's interior presence. Engineered specifically for Land Rover applications across the 2005–2023 model range, each bulb in this kit is fully Canbus-compatible — meaning your instrument cluster will not register a fault, and you will not encounter the blinking or flicker that cheaper universal LEDs are notorious for. The output is a clean, neutral-to-cool white that transforms the cabin feel from factory-standard to genuinely modern, without touching a single wire. Whether you drive an early L538 Evoque or the current L551 generation, this kit has been verified for direct fitment across all trim levels. Installation requires no professional expertise — the complete kit including a pry tool can be fitted in under 30 minutes at home, making this one of the most rewarding upgrades in the Victorious range. What's Included 💡 Front Map / Dome Light Model-specific LED bulb for front overhead reading and dome positions 💡 Rear Map / Dome Light Rear passenger overhead illumination — direct replacement bulb 🪞 Vanity Mirror Lights Available in select packages — sun visor mirror illumination 🗄️ Glove Box Light Available in select packages — interior glove compartment LED 📦 Trunk / Boot Light Available in select packages — load area LED replacement 🔧 Installation Pry Tool Trim-safe removal tool included to protect interior panels Product Highlights Super bright LED output for a noticeably improved cabin ambiance 100% Canbus error-free — no dashboard warnings or fault codes True plug-and-play fitment — no wiring, no modifications Up to 50,000 hours operational lifespan — essentially lifetime fit Heat-resistant construction for safe long-term cabin use Clean neutral-white light output matching modern premium interiors Energy efficient — draws significantly less power than OEM halogens Engineered specifically for Land Rover / Range Rover electrical systems Compatible with all trim levels across 2005–2023 model years Includes trim-safe pry tool — no additional tools required Compatibility Model Code Years Fitment Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–2023 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Land Rover Freelander 2 L359 2006–2014 Direct Fit Land Rover Discovery 3 L319 2005–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2023 Direct Fit Range Rover Vogue L460 2022–2026 Verify Before Order Range Rover Sport L461 2022–2026 Verify Before Order Not sure which variant fits your vehicle? Call us on +44 203 943 9919 Mon–Fri, 9am–7pm and we'll confirm your fitment before you order. Installation Guide 🔧 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Included Pry Tool Only Ensure all interior lights are switched off and the ignition is fully off before beginning. Allow any existing bulbs a few minutes to cool if the vehicle has been recently used. Using the included trim-safe pry tool, carefully lever open the lens cover on each light fitting — start at one edge and work around gently to avoid cracking the housing. Remove the existing halogen or incandescent bulb from its socket. Twist or pull depending on your specific fitting type — refer to your Evoque owner's manual if unsure of bulb type. Insert the corresponding LED replacement bulb from this kit. Ensure the pins seat fully into the socket. If LEDs do not illuminate after testing, rotate the bulb 180° — polarity is the most common cause of non-illumination. Snap the lens cover back into position. Turn on the interior lights and verify full illumination. Repeat across all zones included in your selected package. If a bulb feels loose, use a small flat tool to gently widen the metal pin clips inside the socket for a more secure grip. ⚠ Caution: Do not handle removed halogen bulbs immediately after use — they retain significant heat. Allow cooling before disposal. Do not apply excessive force when removing lens covers on the L551 Evoque as the housings use a clip-and-slot retention system that can crack under pressure. Shop by Your Evoque Browse the full accessory range curated specifically for your generation of Range Rover Evoque: 🔗 Evoque L538 (2011–2018) Full accessory collection for first-gen Evoque 🔗 Evoque L551 (2019–2023) Full accessory collection for second-gen Evoque Upgrade Your Evoque Interior Today Thousands of Land Rover and Range Rover owners across the UK and worldwide have transformed their cabins with this exact kit. Join them — and see the difference quality LED lighting makes from the first switch-on. Shop Evoque Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and model references are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Trim Gloss Black Door Handle Trim for Land Rover Defender L663 110 (2020+) A precision-engineered ABS gloss black door handle surround that transforms the Defender 110's exterior with a clean, cohesive blacked-out finish — no drilling, no modifications required. Defender L663 2020–2026 Gloss Black ABS Direct Fit No Drilling ISO9001 Certified Exterior Trim Model: LLK2811 Overview The Land Rover Defender L663 110 is one of the most visually commanding vehicles on the road — a modern reinterpretation of a true icon, built with a deliberately rugged yet refined exterior language. For owners who want to sharpen that aesthetic further, the door handle area is one of the first places to address. The factory chrome or body-coloured handles can feel inconsistent with a blacked-out or stealth build, and these gloss black trims resolve that instantly. Manufactured from high-grade ABS plastic and finished in a deep, mirror-quality gloss black, these door handle trims are engineered to the precise contours of the 2020+ Defender 110 L663 platform. Each piece is cut and formed to sit flush against the door skin, eliminating any unsightly gaps or fitment inconsistencies. The result is a seamless upgrade that looks as though it came straight from the production line — without the dealership price tag. Installation is entirely tool-free, using pre-applied automotive-grade 3M-style adhesive tape that bonds cleanly to the factory panel surface. This is a one-afternoon job that any Defender owner can handle confidently, with no risk to the vehicle's bodywork or paintwork. Certified to ISO9001 quality standards, these trims are built to withstand UV exposure, road wash, and the British weather without fading or lifting. What's Included 🚪 Door Handle Trim Set Full set of gloss black ABS surround trims for all doors on the Defender 110 🔲 Pre-Applied Adhesive Tape Automotive-grade double-sided tape pre-fitted to each trim piece for clean, tool-free installation 📄 Installation Guide Step-by-step instructions included to ensure a straightforward fitting process Product Highlights Precision-engineered for exact fitment on the Defender L663 110 (2020+) Deep gloss black finish delivers a premium, blacked-out exterior aesthetic High-grade ABS construction resists impact, UV degradation and weathering Tool-free installation using pre-applied automotive adhesive tape Flush-fit design sits perfectly flush with the factory door panel surface ISO9001 certified manufacturing process ensures consistent quality control No drilling, cutting, or modification to original bodywork required Fully reversible — can be removed without damage to factory paint Lightweight at 300g — no added load or stress to door mechanisms Compatible with all standard Defender 110 door configurations (2020+) Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Confirmed Land Rover Defender 130 L663 2022–2026 Not Confirmed Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–45 Minutes  |  🛠 Tools Required: None Thoroughly clean each door handle recess using an isopropyl alcohol wipe or panel prep solution. Remove all grease, wax, and road film. Allow to dry completely — this is the most critical step for long-term adhesion. Dry-fit each trim piece before committing, holding it in position to confirm alignment and flush fit against the door panel surface. Peel back the adhesive tape liner on the first trim piece, aligning carefully from one end before pressing down to avoid repositioning once contact is made. Apply firm, even pressure across the entire face of the trim for 30–60 seconds, paying particular attention to the edges and corners. Repeat for all remaining trim pieces. Avoid washing the vehicle or exposing the trims to heavy rain for a minimum of 24 hours to allow the adhesive to fully cure. ⚠ Important: Do not install in temperatures below 10°C (50°F) as cold conditions significantly reduce initial adhesive bond strength. Ensure the vehicle has been indoors or in a warm environment prior to fitting. These trims are designed exclusively for the Defender 110 L663 (2020+) — fitment on any other model is not supported and cannot be guaranteed. Upgrade Your Defender. Properly. These door handle trims are just the beginning. Explore our full range of Defender L663 exterior accessories — curated specifically for owners who refuse to compromise on quality or fitment. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase. If in doubt, contact our team at +44 203 943 9919.

Victorious Automotive · Defender L663 · Interior Trim 2020 Land Rover Defender 110 Blue Aluminum Alloy A/C Knobs & Audio Trim A precision-machined aluminum alloy upgrade that replaces your Defender 110's stock climate and audio trim with a bold, anodised blue finish — no cutting, no drilling, no compromise. Defender L663 2020+ Aluminum Alloy Blue Anodised A/C Knobs Audio Trim Ring Direct Fit ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that commands attention — a modern reinterpretation of one of the most iconic 4x4s ever built, balancing rugged capability with a surprisingly refined interior. For owners who demand that the cabin reflects the same level of care and character as the rest of the vehicle, the factory plastic climate and audio controls can feel like an opportunity left on the table. These Blue Aluminum Alloy A/C Knobs and Audio Trim pieces are designed as a direct replacement for those factory controls. Machined from premium-grade aluminum alloy and finished in a deep anodised blue, they slot directly into place on the Defender 110's centre console without any modification. The contrast between the metallic blue finish and the Defender's interior surfaces — whether you're running the standard black, lunar, or ebony interior — is immediately striking. Beyond aesthetics, the switch to aluminum alloy means a noticeably more tactile and satisfying interaction every time you adjust the climate or audio. The added weight and precision of the material transforms what are otherwise frequent, everyday controls into something that genuinely feels worthy of the vehicle they're fitted to. Manufactured in an ISO9001 certified facility, quality consistency is built into every unit. What's Included ❄️ A/C Control Knobs Full set of climate control knobs in blue anodised aluminum alloy 🎵 Audio Circle Trim Ring Matching blue aluminum alloy trim surround for audio controls 📦 Protective Packaging Components shipped securely to prevent transit damage 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Premium aluminum alloy construction — significantly more robust and premium than factory plastic Deep anodised blue finish that resists fading, scratching, and everyday wear Direct-fit design engineered specifically for the Defender 110 L663 (2020 onwards) No permanent modifications required — fully reversible installation Adds a distinctive, personalised contrast to any Defender interior colour Improved tactile feel with every climate and audio adjustment Manufactured in an ISO9001 certified facility for consistent quality Lightweight yet solid — adds substance without adding complexity Brand new condition, zero refurbished or reconditioned components Ships worldwide via DHL, FedEx, UPS, and TNT for fast global delivery Compatibility Vehicle Year Range Variant Fitment Land Rover Defender 110 (L663) 2020–2026 All trims (S, SE, HSE, X, X-Dynamic) Direct Fit Land Rover Defender 90 (L663) 2020–2026 All trims Verify Before Order Land Rover Defender 130 (L663) 2022–2026 All trims Verify Before Order Range Rover Sport (L494) 2013–2020 All trims Not Compatible Range Rover Vogue (L405) 2013–2020 All trims Not Compatible Range Rover Velar 2018–2022 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Ensure your Defender 110 is parked, engine off, and the centre console is at room temperature before beginning. Carefully grip each factory plastic A/C knob and pull firmly straight outward — the knobs are retained by a friction fit and will release without tools. Remove the factory audio trim ring using the same method, applying gentle but firm even pressure around the circumference. Align the new aluminum alloy A/C knobs with their respective spindles and press firmly until you feel and hear them seat fully into position. Position the audio circle trim ring over the audio control surround and press evenly around the edge until it sits flush and secure. Turn the climate controls through their full range of motion to confirm smooth, unobstructed operation before driving. ⚠ Important: Confirm your exact Defender variant and model year before ordering. Console configurations may differ slightly between early 2020 production vehicles and later model years. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Complete Your Defender Interior These A/C knobs and audio trim pieces are just the beginning. Explore the full Victorious range of Defender L663 interior accessories — each one designed with the same commitment to fit, finish, and quality that Defender owners expect. Shop All Defender 110 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Carbon Fiber AC Vent Frame Trim — Front Air Outlet (2020–2026, L663) A precision-formed carbon fiber finish trim that transforms the Defender 110's front AC vent surrounds into a polished, purposeful interior detail — no tools, no fuss, no compromise. Defender L663 2020–2026 Carbon Fiber Finish High-Quality ABS Peel & Stick Front Air Outlet Interior Trim Direct Fit Overview The Defender 110 L663 is Land Rover's most deliberate design statement in a generation — a vehicle that balances rugged capability with a surprisingly considered interior. But even from the factory, certain details invite refinement. The front AC vent frames, while functional, sit flat and understated against the dashboard. For owners who've already invested in the Defender experience, this is an easy upgrade worth making. These AC Vent Frame Trim covers are precision-cut to match the exact profile of the Defender 110's front air outlet surrounds. Available in a carbon fiber finish, they introduce a layer of visual depth and contrast that suits the Defender's architectural interior aesthetic without looking aftermarket. The ABS substrate is rigid enough to maintain shape over time, and the 3M-style adhesive backing bonds cleanly to the factory plastic without leaving residue or requiring any permanent modification. Where this trim excels is in the detail. Carbon fiber patterning is applied with consistent texture across the face of each piece, and the fit — being custom-developed for the L663 platform — eliminates the gaps and misalignments you'd expect from generic trim kits. If you care about how your Defender looks at the level of interior finishing, this is a straightforward and satisfying addition. What's Included 🪟 Front AC Vent Frame Covers 1 complete set — pre-cut for Defender 110 front air outlets 🔲 Carbon Fiber Finish ABS Trim High-quality ABS with carbon fiber surface texture 🏷️ Pre-Applied Adhesive Backing 3M-style peel-and-stick — ready to install out of the box 📋 Fitting Guide Simple step-by-step instructions included Product Highlights Custom-developed specifically for the Defender 110 L663 front AC vent profile Carbon fiber surface finish adds visual depth and premium contrast High-quality ABS construction — rigid, warp-resistant, and long-lasting Pre-applied adhesive backing for a clean, tool-free installation No drilling, cutting, or modification to factory trim required Residue-free removal — protects original OEM plastic underneath Consistent texture and colour across all included pieces Designed to withstand dashboard heat and UV exposure over time Subtle upgrade that enhances the interior without altering the Defender's character Pairs well with other carbon fiber interior trim upgrades for a cohesive finish Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L461 L461 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Start with a clean interior — ensure the front AC vent surrounds are free of dust, grease, and any dashboard protectant products. A 70% isopropyl alcohol wipe works perfectly. Allow the surfaces to dry fully before proceeding. Any moisture beneath the adhesive will reduce long-term bonding strength. Test-fit each trim piece without removing the adhesive backing first. Confirm alignment and positioning against the vent frame edges. Once satisfied with the fit, peel back the adhesive liner and carefully position the trim onto the vent frame — working from one edge to avoid air bubbles. Apply firm, even pressure across the entire surface of each piece for 30–60 seconds to activate the adhesive bond. Avoid operating the AC vents aggressively for the first 24 hours to allow the adhesive to fully cure in position. ⚠ Note: Ensure your specific Defender 110 variant matches the L663 platform (2020 onwards). Pre-2020 Defender models use an entirely different interior architecture and are not compatible with this trim set. If you're unsure, contact us at +44 203 943 9919 before ordering. Upgrade Your Defender's Interior Explore the full range of Defender L663 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Buy any two items and save 20% with the code below. Shop Defender 110 Collection Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Interior Trim Black ABS Steering Wheel Trim for Land Rover Defender L663 110 (2020–2026) A precision-engineered ABS steering wheel trim that instantly elevates the cockpit of your Defender L663 with a clean, blacked-out finish — no tools, no fuss. Defender L663 2020–2026 110 Wheelbase High-Grade ABS Gloss Black Peel & Stick Interior Trim Direct Fit Overview The Defender L663 110 represents Land Rover's boldest reinterpretation of an icon — a vehicle that blends serious off-road capability with a cabin that's increasingly expected to meet modern luxury standards. For owners who want every detail of their interior to reflect that ambition, the steering wheel is one of the most tactile touchpoints in the entire cabin and one of the first places where a considered upgrade makes an immediate difference. This black ABS steering wheel trim is designed from the ground up to suit the specific geometry of the L663's steering wheel, sitting flush against the existing surfaces without gaps, overhang, or misalignment. Moulded from high-grade ABS thermoplastic, it delivers a consistently matte-black or gloss-black aesthetic that complements the Defender's utilitarian-premium design language — whether your vehicle is trimmed in Ebony, Kvadrat, or the standard cloth finish. The installation method is intentionally simple: a clean peel-and-stick adhesive system means no drilling, no harness interference, and no risk to your vehicle's electronics or airbag system. It's the kind of upgrade that takes minutes but looks like it came from the factory — exactly what a well-specced Defender deserves. What's Included 🖤 Steering Wheel Trim × 1 Black ABS, pre-shaped for L663 steering wheel 🔧 Pre-Applied Adhesive High-bond 3M-grade backing tape included 🧹 Cleaning Prep Wipe For surface preparation before fitment 📄 Fitment Guide Step-by-step printed installation instructions Product Highlights Precision-moulded to match the exact profile of the L663 Defender steering wheel High-grade ABS construction — resistant to heat, UV exposure, and everyday wear Gloss black finish complements both dark and light interior colour schemes Tool-free peel-and-stick installation — no removal of steering wheel required Does not interfere with airbag deployment, buttons, or paddle shifters Lightweight design adds no perceptible weight or bulk to the wheel Colour-stable finish — resists fading and yellowing over time 100% brand new — not refurbished or remanufactured Easy to remove cleanly without leaving residue if needed Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 / L461 2013–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your Defender on a level surface with the engine off. Ensure the steering wheel is in its default centre position. Use the included prep wipe to thoroughly clean the area of the steering wheel where the trim will be applied. Allow to dry completely — at least 2 minutes. Dry-fit the ABS trim piece against the steering wheel to confirm alignment and orientation before committing to adhesion. Peel back the adhesive backing film gradually as you position and press the trim firmly onto the steering wheel surface. Work from one end to the other to avoid air bubbles. Apply firm, even pressure across the entire trim piece for 30–60 seconds to fully activate the adhesive bond. Allow a minimum of 2 hours before driving to let the adhesive cure fully, particularly in cooler ambient temperatures. ⚠ Important: Do not attempt to install this trim while the engine is running or the vehicle is in motion. This trim is designed for the steering wheel surround only — keep clear of all airbag cover seams, controls, and horn pad areas. If you are unsure of any stage, contact our support team on +44 203 943 9919 before proceeding. Complete Your Defender Interior Thousands of Defender owners have trusted Victorious Automotive to deliver premium trim upgrades that look factory-fitted and last. Browse the full Defender L663 interior collection and finish what you started. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are used solely for fitment identification purposes and remain the intellectual property of their respective owners. Product imagery is for illustrative purposes only — always verify compatibility with your specific vehicle variant before purchase.

Victorious · Range Rover Sport · Interior Trim Red Carbon Fiber Gear Shift Knob for Range Rover Sport 2014–2020 Premium real carbon fiber shift knob cover that transforms your interior with sportiness and precision engineering. L494 2014–2020 Carbon Fiber Interior Trim Direct Fit Overview The Range Rover Sport L494 (2014–2020) deserves interior touches that match its commanding presence on the road. This red carbon fiber gear shift knob cover is engineered specifically for your Sport, replacing the factory plastic trim with genuine carbon fiber that catches light and commands attention every time you shift. Crafted from real carbon fiber—not vinyl wrap or film—this piece delivers authentic material depth and durability that mirrors the vehicle's engineering philosophy. The striking red finish complements both modern and classic Sport interiors, adding a layer of intentional sportiness to the cabin. Installation takes minutes with pre-applied dual-sided adhesive; no tools required. This is the kind of detail that separates thorough ownership from surface-level customization. It's visible every single drive, subtle yet unmistakably premium, and built to outlast trends. What's Included 🪡 Shift Knob Cover Real carbon fiber, red finish 🏷️ Pre-Applied Adhesive Dual-sided tape, factory-strength 📋 Installation Guide Clear, step-by-step instructions 🛡️ 30-Day Guarantee Money-back promise, no questions Product Highlights Genuine real carbon fiber—not printed, not vinyl, not resin Precision-molded for exact fit on Range Rover Sport L494 shifter Red gloss finish with protective UV-clear coat Pre-applied adhesive tape ensures secure, permanent bond Installation requires zero tools or technical skill Weighs under 50g—negligible mass, maximum impact Resists fingerprints, dust, and daily wear Compatible with manual and automatic gearboxes Safe for leather and plastic shift knobs Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Year Range Fit Status Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport L461 2022+ Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022+ Not Compatible Land Rover Discovery 5 2017+ Not Compatible Note: This cover is engineered exclusively for the 2014–2020 Range Rover Sport L494. Confirm your vehicle code before ordering. Installation DIY Fit – Beginner Level Time Required: 5–10 minutes | Tools: None Power off your vehicle and allow the cabin to reach room temperature (adhesive bonds best at 68–72°F). Clean the existing shift knob with a lint-free cloth and mild rubbing alcohol. Allow 2 minutes to dry completely. Peel back the red protective film on the carbon fiber cover to expose the adhesive. Carefully align the cover with your shift knob and press firmly for 30 seconds, working from centre outward to eliminate air bubbles. Allow the adhesive to cure for 24 hours before operating the shift lever. ⚠️ Important: Ensure the shift knob surface is completely dry and free of oils, waxes, or previous coatings. Any contaminant will reduce adhesive strength. If removal is needed within the first 7 days, use a heat gun (low setting) to gently loosen the cover—do not force it. Why Choose Victorious We specialise exclusively in Range Rover, Land Rover, and Defender parts. Every product is tested on real vehicles in our workshop. We ship worldwide via DHL, FedEx, UPS, and TNT. With 12,300+ verified 4.9⭐ reviews and a 30-day money-back guarantee, your satisfaction is protected. Need help? Ring us Monday–Friday, 9am–7pm: +44 203 943 9919. Upgrade Your Sport Interior This red carbon fiber shift knob cover is the kind of detail that separates enthusiasts from casual owners. Premium materials. Precision fit. Built to last. Add to Basket Use code 22GET20 for 20% off any 2 items ✓ 12,300+ Reviews – 4.9⭐ ✓ 30-Day Guarantee – Money back ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or any official Land Rover dealer. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility information is provided in good faith; please verify fitment with your vehicle documentation before purchase.

Victorious Automotive · Range Rover Sport L494 · Gear Mechanism Range Rover Sport Gear Knob Lever Button & Handball Plating Sliding Handle — 2014–2017 (L494) A precision-matched replacement for the gear selector lever button and handball plating handle on the 2014–2017 Range Rover Sport L494 — restoring smooth, satisfying gear engagement with a direct OEM-spec fit. Range Rover Sport L494 2014–2017 OEM Ref: LR077066 Material Ref: LR108936 Direct Fit Handball Plating DIY Install Gear Selector Repair Overview The Range Rover Sport L494 is a vehicle that commands presence — both on and off road. Every detail of the interior is engineered to reinforce that sense of authority, and the gear selector is no exception. It sits at the very heart of the driver experience, handled dozens of times on every journey. When the plastic lever button or handball plating handle begins to fail — cracking, sticking, or losing its tactile response — the effect on the driving experience is immediate and disproportionate. This replacement gear knob lever button and handball plating sliding handle is engineered specifically for the 2014–2017 Range Rover Sport L494. Carrying OEM reference LR077066 and material code LR108936, it slots directly into the existing gear mechanism without modification, restoring the crisp, positive action that the original was designed to deliver. The handball plating finish maintains the premium aesthetic of the Sport's interior, ensuring the repair is invisible once complete. Whether the original component has cracked under general wear, warped from temperature cycling, or simply lost its structural integrity, this part addresses the root cause — not just the symptom. No bodge, no workaround. Just a proper, lasting fix that respects the engineering of your vehicle. What's Included 🎛️ Gear Knob Lever Button OEM ref LR077066 — direct replacement for selector mechanism 🖐️ Handball Plating Sliding Handle Material ref LR108936 — premium plated sliding handle insert Product Highlights Precision-fit for Range Rover Sport L494 (2014–2017) OEM reference LR077066 — exact specification match Material code LR108936 — sourced to factory standard Handball plating finish preserves interior aesthetics Direct replacement — no modification required Addresses cracked or broken plastic selector components Restores smooth, positive gear lever action Durable construction built to withstand daily use DIY-friendly installation — no specialist tools needed Supplied as a complete two-piece repair kit Compatibility Vehicle Code Years Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 Verify Required Range Rover Sport L494 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Verify Required Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: Small flathead screwdriver Ensure the vehicle is stationary, engine off, and the gear selector is in Park (P). Locate the plastic cover bearing the gear position indicators (P, R, N, D) around the base of the gear knob. Carefully pry away the plastic gear indicator cover using a small flathead screwdriver — work slowly around the perimeter to avoid cracking. With the cover removed, the retaining screw for the gear knob assembly will be visible. Unscrew and retain. Lift the gear knob assembly clear of the selector shaft and set aside safely. Remove the worn or damaged lever button and handball plating sliding handle from the assembly. Install the new lever button and handball plating handle, ensuring each component seats firmly and clicks positively into position. Reattach the gear knob assembly to the selector shaft and secure with the retaining screw. Replace the gear indicator plastic cover, pressing evenly until it clips flush. Test gear selector action across all positions before driving. ⚠ Note: Take care when removing the gear indicator plastic cover — it is retained by clips and can crack if excessive force is applied. Work methodically around the perimeter rather than levering from a single point. Built for Range Rover Sport Owners Who Won't Compromise At Victorious Automotive, we stock parts that meet the standard your Range Rover Sport was built to. Browse our full Range Rover Sport L494 collection or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you need fitment advice. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔁 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or authorised by Jaguar Land Rover Limited (JLR) or any of its subsidiaries. Land Rover, Range Rover, Defender, and all associated model names are registered trademarks of Jaguar Land Rover Limited. OEM part numbers are referenced for compatibility purposes only.

Victorious Automotive · Range Rover Evoque L538 · Exterior Trim Land Rover Rear Tailgate Trim — Range Rover Evoque L538 (2013–2020) A precision-engineered ABS tailgate trim designed to restore, refine, and elevate the rear appearance of your Range Rover Evoque with a seamless, factory-matched finish. Evoque L538 2013–2020 ABS Plastic Rear Tailgate Exterior Trim Direct Fit No Drilling Multiple Colours Overview The Range Rover Evoque L538 is one of Land Rover's most design-led vehicles — a compact luxury SUV where every panel, surface, and detail contributes to its distinctive presence on the road. The rear tailgate, in particular, is one of the most visible surfaces, and over time its trim can suffer from UV fade, minor scuffs, or simply fall short of the sharp aesthetic Evoque owners expect. This rear tailgate trim has been developed specifically for the 2013–2020 Evoque L538 platform. Manufactured from premium-grade ABS plastic, it follows the exact contours of the tailgate surround and is available in multiple finishes to complement your vehicle's colour scheme — whether that's a gloss black accent, a body-matched panel, or a brushed silver tone. Every edge, recess, and mounting point has been replicated to deliver a fitment that feels original, not aftermarket. Installation requires no specialist tools or permanent modifications — the trim fastens via the factory mounting points already present on the tailgate. The result is an immediate upgrade that tightens the rear aesthetic, frames the tailgate cleanly, and gives your Evoque the kind of polished rear-end presence that holds up at any angle. What's Included 🔲 Rear Tailgate Trim (×1) Pre-shaped ABS panel for Evoque L538 tailgate 📋 Installation Guide Step-by-step instructions included in the box 🔩 Mounting Hardware Clips and fixings for secure, no-drill fitment 📦 Protective Packaging Foam-lined box to ensure safe delivery Product Highlights Precision-engineered for direct fitment on the Range Rover Evoque L538 (2013–2020) Constructed from high-grade ABS plastic — impact-resistant and UV-stable Available in multiple finish options to suit your vehicle's exterior colour Follows factory contours exactly for a seamless, OEM-quality appearance No drilling required — uses existing tailgate mounting points Resists warping, cracking, and discolouration in all weather conditions Enhances the rear-end aesthetic by framing the tailgate cleanly Ideal for replacing faded, cracked, or missing original trim pieces Lightweight construction — no added load on the tailgate mechanism Straightforward DIY installation achievable in under 30 minutes Compatibility Model Code Years Fitment Range Rover Evoque L538 2013–2020 Direct Fit Range Rover Evoque L551 (2021+) 2021–Present Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 5 L462 2017–2022 Not Compatible Land Rover Defender L663 2020–Present Not Compatible Not sure about your vehicle? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool (optional) Open the rear tailgate fully and clean the existing trim area thoroughly with an isopropyl alcohol wipe to remove any dirt, grease, or residue. If replacing an existing trim piece, use a plastic trim removal tool to gently unclip the old trim from its mounting points — work around the perimeter carefully to avoid cracking adjacent panels. Dry-fit the new tailgate trim to confirm alignment against all factory mounting points before final installation. Beginning from one end, press the trim firmly into position along the mounting clips, working evenly across the full length of the panel to avoid stress on any single point. Once seated, apply firm pressure across the entire trim surface to ensure all clips are fully engaged and the panel sits flush with the surrounding bodywork. Step back and inspect the fit from a distance — check for any gaps, misalignment, or raised edges before closing the tailgate. ⚠ Important: Confirm your exact Evoque model year before fitting. The L538 and L551 share a similar visual profile but have different tailgate dimensions. Always verify compatibility using your VIN or registration plate prior to installation. Built for Evoque Owners Who Don't Compromise Every product at Victorious Automotive is selected for owners who hold their vehicles to the same standard the factory intended — or higher. This tailgate trim is no different. Restore the rear-end detail your Evoque deserves. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Real Carbon Fiber Passenger Side Trim for Range Rover Sport L494 (2014–2019) Elevate your Sport's climate control area with authentic carbon fiber detailing that delivers the premium SVR aesthetic instantly. L494 2014–2019 Real Carbon Fiber LHD Clip-On Overview The Range Rover Sport L494 remains one of the most visually commanding mid-size SUVs on the road. For owners seeking to refine the interior cabin—particularly those running left-hand drive configurations—this carbon fiber passenger side trim transforms the climate control area with understated, premium detailing that catches the eye of anyone who knows what to look for. Crafted from genuine carbon fiber with a TPU protective layer, this trim clips directly over the existing climate cover without modification. The laser-cut profile ensures pixel-perfect alignment, creating a seamless integration that elevates the cabin's overall visual hierarchy. Whether you're aiming for the aggressive SVR look or simply adding a technical flourish to your daily driver, this piece delivers authentic carbon weave at a fraction of full interior retrim costs. Installation takes minutes. No drilling, no permanent alteration, no regret. This is the kind of upgrade that makes sense for Sport owners who appreciate precision engineering and aren't interested in compromises. What's Included 🧬 Carbon Fiber Trim Genuine carbon weave with TPU finish 📏 Precision Cut Laser-cut for OEM-grade fitment ✓ Ready to Install No preparation or additional parts required Product Highlights Genuine carbon fiber construction with protective TPU layer Fits 2014–2019 Range Rover Sport L494 (LHD only) Clip-over installation—no drilling or permanent modification Laser-cut profile for perfect OEM alignment Adds authentic SVR-inspired visual upgrade to cabin Resists fingerprints and maintains finish integrity Lightweight and durable weave structure Replaces standard climate control trim panel Compatible with all factory interior color schemes Elevates perceived cabin quality instantly Compatibility Model Year Range Drivetrain Status Range Rover Sport 2014–2019 LHD (Left-Hand Drive) Direct Fit Range Rover Sport 2014–2019 RHD (Right-Hand Drive) Not Compatible Range Rover Sport 2020–2024 (L461) All Not Compatible Other Range Rover Models All All Not Compatible Double-check your vehicle's drive configuration before purchasing. This trim is engineered exclusively for left-hand drive L494 models (2014–2019). Fitment on RHD vehicles or newer L461 generations is not supported. Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Open the driver-side door and locate the climate control trim panel on the passenger side. Gently pry the existing climate cover from the dashboard using a soft plastic trim tool (or your fingers if you're careful). Align the carbon fiber trim over the exposed area, ensuring the edges sit flush with the surrounding dashboard. Press firmly along the entire trim surface until all clips engage and the trim sits securely. Verify fitment by running your hand along the perimeter—there should be no gaps or movement. Reinstall any removed trim pieces and enjoy your upgraded cabin. Note: If you're uncomfortable removing dashboard trim, we recommend having a professional installer handle this. Most Land Rover and Range Rover specialists can complete the job in under 15 minutes. Ready to Upgrade Your Sport? Transform your Range Rover Sport's interior with authentic carbon fiber detailing. Clean, professional, and built to last—this is how the enthusiasts do it. Shop Range Rover Sport Parts Use code 22GET20 for 20% off any 2 items 4.9/5 from 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names and vehicle designations are used for reference and compatibility purposes only. Always verify fitment with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Sport · Exhaust & Styling SVR Style Exhaust Muffler Tips for Range Rover Sport — Stainless Steel Rear Tail Pipe Set Transform the rear end of your Range Rover Sport with SVR-inspired stainless steel exhaust muffler tips — a direct, no-paint upgrade that delivers factory-sport presence without factory-sport costs. Range Rover Sport SVR Body Kit Compatible Stainless Steel 304 2 Piece Set Rear Mounting 7.0cm Inlet Part No. MQL-202 Silver Finish Resistance Muffler Type 4KG Total Weight Overview The Range Rover Sport has always struck a rare balance between commanding road presence and genuine performance intent. Whether you're running the L494 or an earlier generation fitted with an SVR body kit, the rear of the vehicle is one of the most visible indicators of that sporting character — and the exhaust tips are central to that impression. Stock exhausts on non-SVR variants often appear understated by comparison, leaving the rear aesthetic feeling unfinished next to an otherwise purposeful body. These SVR Style Exhaust Muffler Tips are precision-formed from Grade 304 stainless steel, offering the aggressive quad-outlet visual language of the full SVR without any permanent modification to your vehicle. The polished silver finish catches light at every angle, complementing the Sport's bold shoulder lines and rear diffuser design. At 4KG total for the pair, they feel substantive and premium — not hollow or lightweight afterthoughts. Designed specifically for Land Rover models fitted with the SVR body kit, the tips feature a 7.0cm inlet diameter and rear mounting position, integrating cleanly with your existing exhaust system. No painting. No cutting. No specialist tools required — though professional fitting is always recommended for the cleanest result. These are a meaningful visual upgrade executed in the right material, for owners who know the difference. What's Included 🔧 Exhaust Muffler Tips × 2 Matched pair, stainless steel 304, silver polished finish 📦 Protective Packaging Securely boxed for international transit via DHL, FedEx, UPS or TNT 📋 Product Reference Card Part number MQL-202 for warranty and fitment reference Note: No printed installation guide is included. Professional installation is strongly recommended. Product Highlights Grade 304 stainless steel construction for lasting corrosion resistance SVR-inspired dual-outlet design per side — four tips total visual effect Polished silver finish — no painting required, ready to fit 7.0cm inlet diameter for a secure, rattle-free fit Resistant to UV, water, road salt, grease, oil and mild acids Lightweight relative to its solid feel — just 4KG for the full pair Rear mounting position matches OEM SVR exhaust outlet placement No permanent modification to your exhaust system required Compatible with Range Rover Sport models fitted with SVR body kit Adds a genuine sporty presence without aggressive or over-styled aesthetics Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Sport with SVR Body Kit L494 2013–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Sport with SVR Body Kit L461 2022–2026 Verify Fitment Range Rover Sport (Standard — No SVR Kit) L494 / L461 All Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Land Rover Defender L663 L663 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Not Compatible These tips are designed for vehicles fitted with the SVR body kit. If you're unsure whether your vehicle qualifies, contact us on +44 203 943 9919 before ordering. Installation Notes 🔩 Installation Overview Difficulty: Moderate  |  Estimated Time: 45–90 minutes  |  Tools: Basic hand tools, hose clamps or exhaust clamps Ensure the vehicle is parked on a flat surface and the exhaust system has fully cooled before beginning work. Measure your existing exhaust pipe outlet diameter to confirm compatibility with the 7.0cm inlet size of these tips. Clean the rear exhaust pipe ends thoroughly, removing any carbon build-up, rust or debris that could prevent a secure fit. Slide each muffler tip over the corresponding exhaust outlet, positioning it so the face of the tip aligns flush with the rear bumper cutout. Secure each tip using appropriate exhaust clamps, tightening evenly to prevent any lateral movement or vibration noise. Start the vehicle and allow it to idle for a few minutes. Inspect for any movement, rattling or exhaust leaks around the inlet joint. Once satisfied, give the tips a final wipe down with a microfibre cloth to remove any fingerprints before the steel fully heats and sets. ⚠ Important: No installation guide is included with this product. Professional installation is strongly recommended. Incorrect fitting may result in noise, vibration or damage to the exhaust system. Always allow exhaust components to fully cool before handling. Built for Range Rover Sport Owners Who Don't Compromise These SVR style exhaust tips are one of the most cost-effective ways to complete the rear styling of your Range Rover Sport. Explore our full collection of Range Rover Sport accessories — or call our team if you'd like personalised fitment advice. Shop Range Rover Sport L494 Accessories Shop Range Rover Sport L461 Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Evoque L538 · Exterior Trim Range Rover Evoque Side Air Vent Outlet Cover Trim — Gloss Black / Matte Chrome (2012–2017) A direct-fit, adhesive-backed side vent cover trim for the Evoque L538 that elevates the exterior finish with bold contrast — available in Gloss Black or Matte Chrome. Evoque L538 2012–2017 ABS Plastic Gloss Black Matte Chrome 3M Adhesive Set of 2 No Drilling Exterior Trim Overview The Range Rover Evoque L538 is one of Land Rover's most design-forward vehicles — a compact luxury SUV that made an immediate statement when it arrived in 2011. Its angular bodywork, raked roofline, and strong character lines were never intended to blend in. Yet as Evoque models age, the original exterior trim pieces can lose their visual impact — fading, yellowing, or simply failing to reflect the level of finish their owners expect. These side air vent outlet cover trims are designed specifically for the 2012–2017 Evoque L538, covering the decorative side vents located along the front wings. Whether you're refreshing a tired original finish or adding a sharper contrast against your body colour, these covers offer two confident options: a high-gloss black for a blacked-out, sport-influenced aesthetic, or a matte chrome for a cooler, contemporary metallic look that complements both light and dark paint tones. Manufactured from high-grade ABS plastic with a robust surface finish, these trims are engineered to resist UV exposure, moisture ingress, and everyday wear. The pre-applied 3M automotive-grade adhesive tape on the reverse ensures a clean, flush bond to the factory vent housing — no drilling, no bodywork modification, and no professional fitting required. For Evoque owners who take pride in the details, this is one of the most cost-effective ways to refresh the exterior character of an already striking vehicle. What's Included 🔲 Side Vent Cover Trim × 2 Left and right pieces supplied as a matched pair 🔴 Pre-Applied 3M Tape Automotive-grade adhesive already fitted to reverse 📐 Direct-Fit Profile Moulded to match OEM vent geometry precisely 🎨 Finish Choice Available in Gloss Black or Matte Chrome Product Highlights Precision-moulded ABS plastic for a consistent, high-quality surface finish Available in Gloss Black and Matte Chrome to suit different exterior colour schemes Supplied as a set of 2 — both left and right covers included Pre-applied 3M automotive adhesive tape for a clean, no-drill installation Designed and profiled specifically for the Evoque L538 2012–2017 vent housing UV-resistant finish helps prevent fading or dulling over time Flush-fit design that looks factory-fitted once applied No professional fitting required — achievable at home in minutes Lightweight construction adds no meaningful weight to the bodywork Ideal for exterior refresh, personalisation, or replacing discoloured OEM trim Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Evoque (Facelift) L538 2016–2019 Verify Before Order Range Rover Evoque L551 2019–2025 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean both side vent surfaces using an isopropyl alcohol wipe or equivalent degreaser. Remove any wax, polish residue, or road grime to ensure a strong adhesive bond. Allow the surface to dry completely. In cold conditions (below 10°C), gently warm the vent area with a heat gun or hair dryer — this improves 3M tape adhesion significantly. Dry-fit each cover trim to the vent without removing the tape backing. Confirm alignment and check that the profile sits flush against the vent housing on all edges. Peel the protective backing from the 3M tape. Carefully align the trim cover to the vent opening, pressing firmly from the centre outward to avoid trapping air bubbles beneath the panel. Apply firm, even pressure across the full surface for 30–60 seconds. For best results, avoid washing the vehicle for 24–48 hours to allow the adhesive to fully cure. ⚠ Note: If your Evoque is a 2016–2017 model, please verify the vent housing design before ordering. Late L538 facelift models may have a slightly revised vent profile. If in doubt, contact us at +44 203 943 9919 and our team will confirm compatibility. Complete the Evoque's Exterior These vent covers are just one part of a full exterior transformation. Browse our dedicated Range Rover Evoque L538 collection for bonnet vents, mirror caps, grille surrounds, door handle covers, and more — all designed to the same standard of fit and finish. Shop Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious · Range Rover Sport L494 · Interior Trim Red Carbon Fiber Steering Wheel Trim for Range Rover Sport & Velar Instantly elevate your steering wheel with a vibrant red carbon finish that delivers SVR-inspired aggression without compromise. L494 / L560 2014–2020 Carbon TPU Clip-On Fit UK Stock Overview The Range Rover Sport L494 and Range Rover Velar L560 have always demanded interior appointments that match their commanding presence. This Red Carbon Fiber Steering Wheel Trim transforms that focal point into a statement piece—blending premium aesthetics with functional durability in a way that factory trim simply cannot. Constructed from high-quality carbon TPU, this trim is precision laser-cut to clip seamlessly over your existing steering wheel surround. The vibrant red carbon finish creates an aggressive, performance-oriented look that harks to SVR heritage while remaining elegant enough for daily driving. Whether you're refreshing a Sport or adding character to a Velar, this upgrade speaks to your commitment to detail. Installation is straightforward: no adhesive, no drilling, no permanent modifications. Simply clip into place and enjoy an interior that reflects who you are as a driver. What's Included 📦 Steering Wheel Trim Precision laser-cut carbon TPU 🛠️ Clip-On Installation No adhesive or tools required 📋 Fitting Guide Step-by-step instructions included ✔️ Quality Assurance 30-day money-back guarantee Product Highlights Seamless clip-on design—no permanent modifications Precision laser-cut for exact factory-spec fitment High-quality carbon TPU construction resists wear and fading Vibrant red carbon finish adds instant visual impact Lightweight and non-intrusive—preserves steering feel Direct fit for L494 and L560 steering wheels Easy removal if desired—completely reversible Complements SVR-spec and standard models alike Fully cured and pre-finished—ready to install UV-resistant material maintains color integrity Compatibility Vehicle Model Years Compatibility Range Rover Sport 2014–2019 (L494) Direct Fit Range Rover Velar 2017–2020 (L560) Direct Fit Range Rover Sport 2022+ (L461) Not Compatible Range Rover Vogue All Models Not Compatible Defender All Models Not Compatible Note: Verify your vehicle's steering wheel diameter and trim design before ordering. This product is engineered for the specific steering wheel geometry of the L494 Sport and L560 Velar. Installation Difficulty: Easy | Time: 10–15 minutes Ensure steering wheel is in the straight-ahead position. Carefully inspect the existing trim for dust or debris. Clean if necessary. Begin at the top of the steering wheel and gently press the carbon trim clip into the groove, working downward on both sides. Ensure clips are fully seated and the trim sits flush against the existing wheel surround. Gently test the fit by running your finger along the seams to confirm secure placement. Step back and admire your upgraded interior. ⚠️ Important: Do not force the trim into place. If resistance is felt, stop and recheck alignment. Forcing may damage clips or the steering wheel. Ensure your steering wheel matches the specifications in the compatibility table before proceeding. Ready to Transform Your Interior? This Red Carbon Fiber Steering Wheel Trim is a statement piece that separates discerning Range Rover owners from the rest. Clip it on, feel the difference, and let your steering wheel reflect your commitment to excellence. Shop Now Use code 22GET20 to save 20% when ordering any 2 items. ⭐ 4.9/5 — 12,300+ verified reviews 🌍 Worldwide — DHL, FedEx, UPS, TNT 💰 30-Day — Money-back guarantee ☎️ +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with, endorsed by, or manufactured by Jaguar Land Rover Ltd. Range Rover, Sport, and Velar are registered trademarks of JLR. All vehicle references are for fitment compatibility only.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Rear Air Conditioning Vent Cover for Range Rover Evoque L538 (2012–2017) A precision-cut carbon fibre overlay that transforms the Evoque's rear AC vent surround into a purposeful, high-contrast interior detail — no drilling, no permanent modification. Range Rover Evoque L538 2012–2017 Carbon Fibre Rear AC Vent Interior Trim Direct Fit AJLN1009 ISO 9001 Certified No Drilling Required Overview The Range Rover Evoque L538 redefined compact luxury SUVs when it arrived in 2011, pairing bold exterior design with a cabin that punched well above its class. Yet for owners who live with the Evoque every day, the standard rear air conditioning vent surround — finished in plain gloss black or body-colour plastic — can feel like an unfinished opportunity. It's one of those details that only truly stands out once you've upgraded it. This carbon fibre rear AC vent cover from Bosoner is engineered specifically for the 2012–2017 Evoque L538 to original factory dimensions (model code AJLN1009). Produced from genuine woven carbon fibre with a high-gloss protective lacquer, it overlays the existing vent surround with clean precision, adding visual depth and a motorsport-derived texture that reads as intentional rather than aftermarket. The weave pattern catches ambient cabin light in a way that standard plastics simply cannot replicate. Beyond aesthetics, the carbon overlay adds a tactile layer of surface protection to the vent frame — guarding against the minor scuffs and surface dulling that naturally accumulate on rear passenger trim over time. It's a small upgrade in isolation, but it forms part of a coherent approach to interior refinement that transforms how the Evoque's cabin feels to drive and travel in. What's Included 🪟 Carbon Fibre Rear AC Vent Cover Pre-cut to OEM vent dimensions — model AJLN1009 🔧 3M Adhesive Pre-Applied Industrial-grade backing for a secure, residue-free bond 🧴 Cleaning Wipe Surface preparation wipe included for optimal adhesion 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine woven carbon fibre construction — not vinyl wrap or printed film High-gloss UV-stable lacquer coat protects weave and resists fading Precision cut to OEM rear AC vent dimensions — AJLN1009 specification 3M industrial adhesive backing — no drilling, no clips, no damage to trim Protects original vent surround from scuffs, scratches and daily wear Adds measurable visual depth with authentic motorsport carbon weave texture ISO 9001 certified manufacturing for consistent quality control Lightweight — adds no perceptible weight to rear cabin trim Compatible with all Evoque L538 variants including Si4, eD4 and SD4 trims Pairs naturally with other carbon interior upgrades for a unified cabin look Compatibility Vehicle Generation / Code Years Fit Range Rover Evoque L538 — 5-Door 2012–2017 Direct Fit Range Rover Evoque L538 — 3-Door Coupé 2012–2017 Direct Fit Range Rover Evoque L538 — Convertible 2016–2017 Verify Before Purchase Range Rover Evoque L551 (2nd Gen) 2019–Present Not Compatible Land Rover Discovery Sport L550 2015–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible If you own the 2019-onwards Evoque, browse our dedicated Range Rover Evoque L551 collection for correctly fitted carbon interior upgrades. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None With the vehicle parked and cabin at room temperature, locate the rear air conditioning vent surround between the rear passenger seats. Use the included cleaning wipe to thoroughly degrease the surface of the existing vent trim. Allow to dry completely — approximately 2–3 minutes. Test-fit the carbon fibre cover dry (without removing the adhesive backing) to confirm alignment and positioning before committing. Peel back the 3M adhesive liner approximately halfway. Align the top edge of the cover carefully with the vent surround and press firmly downward. Once positioned correctly, remove the remaining adhesive liner and apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before cleaning or exposing to moisture for best long-term bonding strength. ⚠ Note: Do not apply in temperatures below 10°C (50°F) as this significantly reduces adhesive bonding strength. If fitting in winter, allow the vehicle cabin to warm fully before installation. Do not attempt to remove and reposition once the adhesive has made full contact with the trim surface. Upgrade Your Evoque's Cabin — The Right Way At Victorious Automotive, we only list interior upgrades that we'd fit to our own vehicles. This carbon fibre rear vent cover is a straightforward, reversible improvement that adds genuine quality to the Evoque L538's rear cabin — whether you're building a full carbon interior suite or starting with one considered detail. Shop All Evoque L538 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchase. If in doubt, contact our team on +44 203 943 9919.

Victorious Automotive · Range Rover Evoque · Interior Trim Range Rover Evoque 3D Carbon Fibre Interior Centre Console Sticker Decal Set A precision-cut set of 3D carbon fibre stickers designed to transform the interior trim of the Range Rover Evoque — delivering a sport-premium aesthetic with a clean, factory-finished look and zero permanent modification. Range Rover Evoque L538 Range Rover Evoque L551 3D Carbon Fibre Interior Trim Centre Console No Drilling Self-Adhesive Waterproof Heat Resistant Overview The Range Rover Evoque has always struck a balance between urban elegance and genuine capability — an SUV that looks as refined parked on a Mayfair street as it does on a weekend trail. Its interior is a key part of that identity, and for Evoque owners who want to push that aesthetic further, the centre console and surrounding trim panels are an ideal starting point. This 3D carbon fibre interior sticker set is engineered to fit the Evoque's cabin geometry precisely, covering the centre console and key interior trim zones with a textured, multi-dimensional carbon fibre finish. Unlike flat vinyl wraps, the material uses a gas-venting groove construction that conforms naturally to curved and contoured surfaces — allowing it to sit flush against the trim without lifting at the edges or trapping air beneath. The adhesive backing is strong enough to hold permanently through heat, humidity, and vibration, yet the stickers can be cleanly removed without leaving residue or damaging the original surface beneath. For Evoque owners who want a bolder, sportier interior without committing to permanent modification, this set delivers a genuinely impressive result. What's Included 🧩 Full Interior Sticker Set 1 complete set covering centre console and key trim zones 🎴 3D Carbon Fibre Film Gas-venting groove texture membrane for contour conformity 📐 Pre-Cut Panels Precisely cut to match Evoque interior trim profiles 📋 Installation Guide Step-by-step application instructions included Product Highlights Brand new, never fitted — 100% unused condition 3D gas-venting groove carbon fibre membrane material Conforms to curved and contoured interior trim surfaces Waterproof construction — safe in humid and wet conditions UV-resistant and sunscreen treated for long-term colour stability High-temperature tolerant — safe across typical cabin heat ranges High-tensile adhesive leaves zero marks upon removal Does not damage original trim paint or surface finish Withstands high-pressure water rinsing without lifting Moderate thickness — perfect fitment and straightforward installation Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 (1st Gen) 2011–2018 Direct Fit Range Rover Evoque L538 (Facelift) 2019–2023 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2025 Direct Fit Range Rover Velar L560 2017–2025 Not Confirmed Range Rover Sport L494 / L461 2013–2025 Not Compatible Defender L663 2020–2025 Not Compatible Unsure about your specific model year or trim level? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools Required: None (hair dryer recommended) Thoroughly clean the interior trim surfaces to be covered and lightly mist with water to allow for initial position adjustment. Lightly mist the adhesive side of the carbon fibre sticker panel before application — this allows you to reposition before committing to final placement. Starting from one edge, work the sticker inward, pressing from the outside edges toward the centre to avoid trapping air. Align critical reference points — such as switch cutouts or trim seams — first, then work outward to the surrounding areas. Use a soft cloth or squeegee to smooth the sticker firmly and flush against the trim surface, removing any remaining air pockets. Use a hair dryer or heat gun on a low setting to warm any curved corners or edges, then press firmly to ensure a permanent, docile bond. Note: Allow 24 hours before exposing the installation to significant moisture or temperature extremes. Do not stretch the film excessively over deep contours — heat application makes conforming to curves significantly easier. Explore the Full Evoque Collection Browse our complete range of interior and exterior accessories for the Range Rover Evoque — from trim upgrades and storage solutions to protection accessories and styling kits. Shop Range Rover Evoque L538 → Shop Range Rover Evoque L551 → Buying two or more items? Use code at checkout for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of describing product fitment compatibility.

Victorious Automotive · Range Rover Vogue L405 · Interior Trim Aluminum Alloy Central Air Conditioning Trim for Range Rover Vogue L405 (2018–2020) A precision-machined aluminium alloy upgrade that replaces the factory plastic climate control surround with a sculpted, weighted finish worthy of the Vogue's interior. Range Rover Vogue L405 2018–2020 Aluminum Alloy Silver / Red / Blue Direct Fit No Drilling Interior Trim Under 2 Min Install Overview The Range Rover Vogue L405 is one of the most accomplished luxury SUVs ever produced — a vehicle whose interior is expected to feel as considered and composed as the engineering beneath it. From the 2018 model year through to the final L405 run in 2020, Land Rover's flagship offered a level of refinement that very few vehicles can match. But the factory climate control surrounds, finished in standard plastic, remain one of the few areas where the cabin's premium ambition falls slightly short of its potential. This Aluminum Alloy Central Air Conditioning Trim is designed specifically to address that. Machined from high-grade aluminium alloy and available in Silver, Red, and Blue anodised finishes, it replaces the stock plastic surround around the central HVAC and audio controls with a component that feels genuinely substantial in the hand — and looks the part the moment you close the door. The heavier-weight construction gives it a solidity that plastic simply cannot replicate, while the precision fit ensures it sits flush with the surrounding dashboard architecture. Installation requires no tools, no drilling, and no modification to your vehicle's wiring or trim panels. The trim adheres via a purpose-fitted mounting system that holds securely across daily use and temperature variation. Whether you're refreshing a well-loved Vogue or adding a final detail to a recent purchase, this is one of the most immediate interior upgrades available for the L405 platform. What's Included 🧩 Central AC Trim Set Full surround for HVAC & audio control zone 🔧 Mounting Adhesive Strips Pre-applied, high-bond automotive-grade adhesive 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Protective Packaging Foam-lined box to prevent transit damage Product Highlights Precision-machined from high-grade aluminium alloy for genuine weight and rigidity Available in Silver, Red, and Blue anodised finishes to suit your interior Direct fit for Range Rover Vogue L405 2018–2020 — no modification required Installs in under 2 minutes with no tools, drilling, or panel removal Heavier-weight construction dramatically improves the tactile feel of the control zone Replaces the factory plastic surround for a more premium, cohesive dashboard aesthetic Flush fitment sits seamlessly within the existing dashboard architecture High-bond automotive adhesive backing holds securely through temperature extremes Does not obstruct, interfere with, or alter HVAC or audio control functionality Reversible installation — returns cleanly to factory specification if required Compatibility Model Code Year Range Fit Range Rover Vogue SE L405 2018 Direct Fit Range Rover Vogue L405 2019–2020 Direct Fit Range Rover Sport L494 2018 Direct Fit Range Rover Velar L560 2017–2018 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Vogue L405 2013–2017 Not Compatible Not sure which model year you have? Call us on +44 203 943 9919 Mon–Fri, 9am–7pm and we'll confirm compatibility before you order. Installation Notes ⏱ Difficulty: Beginner  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure the dashboard surface around the HVAC control area is clean, dry, and free from dust, grease, or moisture. A light wipe with an isopropyl alcohol cloth is recommended for optimal adhesion. Remove the protective backing from the pre-applied adhesive strips on the reverse of the trim piece. Align the trim carefully over the factory climate control surround, using the moulded edges as a guide to ensure accurate positioning before making contact. Press firmly and evenly across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Allow 30 minutes before regular use to allow the adhesive to fully cure at ambient cabin temperature. ⚠ Please Note: Confirm your exact model year and trim level before fitting. The 2018–2020 L405 HVAC panel layout differs from earlier L405 production years. Do not attempt to fit on non-listed models — panel geometry and control positioning will not align. If you are unsure, contact our team before installation. Upgrade Your Vogue's Interior Today Join over 12,300 Range Rover and Land Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop All Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Multi-Vehicle · Protection Carbon Fiber Door Sill Protector for 2010–2020 Vehicles Premium TPU protection with authentic carbon fiber styling—easy to apply, durable, and universally compatible across a decade of vehicle platforms. 2010–2020 Model Years Multi-Vehicle Compatible Premium TPU Material Carbon Fiber Effect Self-Adhesive Overview Designed for any enthusiast looking to protect and elevate their vehicle's interior and exterior trim, this Carbon Fiber Door Sill Protector offers genuine protection against scuffs, scratches, and everyday wear. Whether you're driving a 2010 model or a 2020 platform, this universal solution installs on door sills, bumpers, exterior moldings, and more—wherever protection and style intersect. Constructed from premium thermoplastic polyurethane (TPU), this protective film features a sophisticated carbon fiber aesthetic that complements modern and classic vehicle designs alike. The material is engineered for durability, resisting fading, peeling, and degradation from UV exposure and harsh weather conditions. What sets this protector apart is its versatility. Offered in four distinct sizes, you can customize coverage to suit door sills, bumpers, side moldings, or any high-impact area. The material is pre-cut, but easily shapeable—trim with precision and apply with confidence using the included self-adhesive backing. What's Included 📦 1x Protective Film Roll Pre-sized, self-adhesive TPU material ✂️ Easy Cut & Shape Trimmer-friendly for custom application areas 🎨 Carbon Fiber Finish Authentic weave pattern for premium appearance 🌍 Universal Fit Compatible with 2010–2020 vehicle range Product Highlights Premium TPU material resists UV damage and weathering Authentic carbon fiber aesthetic elevates interior and exterior design Self-adhesive backing—no additional fasteners or tools required Easy to cut and shape for precise, custom applications Protects door sills, bumpers, moldings, and trim from scuffs Four size options for versatile coverage across vehicle types Durable formula maintains appearance for years of use Non-invasive installation—no drilling, gluing, or modifications Suitable for all 2010–2020 vehicle platforms and manufacturers Professional finish—looks OEM when properly applied Size & Specification Options Size Option Dimensions Best For Size 1 5cm × 2.5 meters Full door sill coverage on multiple doors Size 2 5cm × 1 meter Single door sill or partial coverage Size 3 3cm × 2.5 meters Narrow trim and molding protection Size 4 3cm × 1 meter Accent details and bumper trim Installation Notes Difficulty Level: Beginner | Time: 15–30 minutes Prepare the surface: Clean the door sill or trim area thoroughly with soap and water. Dry completely and wipe with rubbing alcohol to remove oils and residue. Measure and mark: Hold the film against the target area. Use painter's tape to mark the edges and ensure proper alignment. Cut to size: Using a sharp utility knife or scissors, carefully trim the film to match your marked dimensions. Keep cuts clean and straight. Peel and apply: Starting at one end, slowly peel the backing and apply the film to the surface, pressing firmly as you progress to eliminate air bubbles. Set firmly: Once applied, use a soft squeegee or credit card to press the entire surface, working out any trapped air from center to edges. Allow to cure: Let the adhesive set for 24 hours before exposing the area to moisture or extreme conditions. Important: Do not apply to wet, dusty, or oily surfaces. For best adhesion and appearance, apply in temperatures above 10°C (50°F). If bubbles form during application, lift gently and re-press rather than puncturing the film. Protect Your Vehicle's Edge in Style This Carbon Fiber Door Sill Protector delivers the durability and aesthetics your vehicle deserves. Whether protecting against daily scuffs or adding a touch of modern design, this TPU film is the universal solution for any 2010–2020 platform. Add to Cart Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Money Back Guarantee ✓ 4.9/5 – 12,300+ Reviews ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All trademarks, logos, and brand names are the property of their respective owners. This product is an aftermarket accessory and is sold as-is for customization purposes.

Victorious Automotive · Range Rover Evoque L538 · Interior Accessories Chrome Gear Knob Rhinestone Sticker for Range Rover Evoque L538 (2011–2016) A precision-cut rhinestone gear knob overlay that adds a refined chrome finish to your Evoque's centre console — fitted in under five minutes, no tools required. Evoque L538 2011–2016 Aluminium Alloy Rhinestone Crystal Chrome Finish Self-Adhesive 5-Min Fit Interior Upgrade Overview The Range Rover Evoque L538 is one of the most recognisable compact luxury SUVs on the road, celebrated for its sharp design language and premium interior appointments. For owners who want to push that interior one step further, the details matter — and few details are touched as frequently as the gear selector. This chrome rhinestone gear knob sticker is designed specifically to overlay the stock gear selector on the Evoque L538 (2011–2016), as well as compatible Jaguar and Land Rover models. Constructed from high-grade aluminium alloy set with crystal rhinestones, the overlay captures and reflects light beautifully, delivering a jewellery-grade focal point at the heart of your cabin without any permanent modification. Unlike bulkier aftermarket gear knobs that require tools, disassembly, or professional fitting, this sticker applies directly to your existing selector using high-strength adhesive. The result is a seamless, factory-looking enhancement that sits flush with the surrounding trim — elevating the overall cabin aesthetic without compromising the tactile feel of your gear changes. What's Included 💎 Rhinestone Gear Knob Overlay Pre-cut chrome aluminium alloy with crystal rhinestone inlay 🔧 Pre-Applied Adhesive Backing High-bond 3M-style adhesive — no extra glue needed 🧹 Cleaning Wipe Prep wipe for a clean bonding surface prior to application 📋 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-cut to match the Evoque L538 gear selector profile exactly High-grade aluminium alloy construction — lightweight yet durable Crystal rhinestone inlay delivers genuine sparkle under cabin lighting Chrome finish complements both silver and black interior colourways Strong adhesive backing ensures a secure, rattle-free bond No drilling, cutting, or permanent modification required Removable without damaging the original gear knob surface Compatible with multiple JLR platform vehicles from the same era Fits in under 5 minutes — no tools, no workshop time Ideal standalone upgrade or paired with other interior trim accessories Compatibility Vehicle Model Code Years Fitment Range Rover Evoque L538 2011–2016 Direct Fit Jaguar XF X250 / X260 2011–2016 Direct Fit Jaguar XJ X351 2011–2016 Direct Fit Jaguar XE X760 2015–2016 Direct Fit Land Rover Discovery Sport L550 2015–2016 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Range Rover Evoque L551 (2019+) 2019–Present Not Compatible Range Rover Sport L494 / L461 2014–Present Not Compatible Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Very Easy  ·  Estimated Time: Under 5 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and gear selector is in Park (P) or Neutral. Use the included cleaning wipe to thoroughly clean the surface of the gear knob, removing any dust, oils, or residue. Allow to dry completely — approximately 60 seconds. Carefully peel the adhesive backing from the rhinestone overlay, taking care not to touch the adhesive surface. Align the overlay centrally over the gear knob, using the edges as a guide before pressing down. Take your time — positioning before contact is key. Press firmly across the entire surface for 20–30 seconds to activate the adhesive bond. Work from the centre outward to avoid air pockets. Allow 30 minutes of cure time before regular use to ensure full adhesion strength. ⚠ Note: Do not apply in temperatures below 10°C or above 40°C as this may affect adhesive performance. Avoid cleaning with harsh solvents or abrasive cloths around the overlay once fitted, as this may loosen the adhesive bond over time. If removing the overlay, use a plastic pry tool and gentle heat from a hair dryer to soften the adhesive — never force it. Elevate Every Gear Change Small details define great interiors. This rhinestone gear knob sticker is one of the quickest and most satisfying upgrades you can make to your Evoque's cabin — and it ships worldwide via DHL, FedEx, UPS, and TNT. Shop All Evoque Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Memory Seat Adjustment Trim – Silver & Gold Swarovski-Style Finish for Range Rover Vogue & Sport (2002–2013) A four-piece peel-and-stick trim set that transforms your memory seat controls into a polished, crystal-accented detail — installed in under two minutes, no tools required. L322 Vogue 2002–2012 L320 Sport 2005–2013 Silver & Gold Swarovski-Style Crystal Chrome Accent Peel & Stick Under 2 Minutes Four-Piece Set Overview The Range Rover Vogue L322 and Range Rover Sport L320 represented a generation of genuinely luxurious SUVs — cars whose interiors were designed to impress from the moment the door closed. After years of ownership, even the finest cabins can benefit from a refresh, and it's often the smallest details that make the biggest difference to how a space feels. These memory seat adjustment trims are designed specifically for the seat control panels found in 2002–2013 Range Rover Vogue and Range Rover Sport models. Each trim is finished in your choice of silver or gold, and features a Swarovski-style crystal detailing set alongside polished chrome elements — adding a refined, jewelled accent to controls you interact with every single journey. Engineered for a completely tool-free installation, the set uses pre-applied 3M-grade adhesive tape that bonds cleanly and securely to the existing control surrounds. There is no cutting, no drilling, and no risk of damage to your original trim. The result is a factory-quality appearance upgrade that takes less time to fit than it does to detail your steering wheel. What's Included 💎 Memory Seat Trim × 4 Complete four-piece set covering all seat memory control positions 🔲 Pre-Applied Adhesive 3M-grade double-sided tape fitted to each trim — ready to install 📋 Fitting Guide Step-by-step instructions for a clean, aligned installation ✨ Crystal Accents Swarovski-style stones set within each trim piece for premium finish Product Highlights Precision-cut to match OEM seat control panel dimensions on L322 and L320 models Available in silver and gold colourways to complement light and dark interior themes Swarovski-style crystal stones add genuine sparkle without appearing aftermarket Polished chrome finish resists fingerprints and maintains its lustre over time Pre-applied 3M adhesive ensures a secure, long-lasting bond with zero residue on removal Tool-free installation — no drilling, cutting or panel removal required Installs in under two minutes per trim piece — full set done in one sitting Crafted from high-quality ABS with a durable plated outer layer Ideal for owners looking to refresh an ageing interior or personalise a recently acquired vehicle Makes a considered, understated gift for any Range Rover enthusiast Compatibility Model Code Years Fit Range Rover Vogue L322 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: Under 10 minutes (full set)  ·  Tools Required: None Ensure the seat control panel surface is clean, dry and free from any dust, grease or polish residue. A quick wipe with an isopropyl alcohol wipe is ideal preparation. Dry-fit each trim piece before committing — hold it in position over the corresponding control to confirm alignment and coverage. Peel the backing from the pre-applied adhesive tape on the first trim piece, taking care not to touch the adhesive surface. Position the trim carefully over the seat control, aligning edges with the panel surround, then press firmly and hold for 30 seconds to allow the bond to set. Repeat for the remaining three trim pieces. Allow 60 minutes before any contact with the trim to ensure full adhesion. Note: Do not apply these trims over damaged, peeling or previously adhesive-treated surfaces — bond strength and finish quality may be compromised. If your existing control panel trim is lifting or cracked, we recommend addressing this before installation. Upgrade Your Interior Today Small details define great interiors. These memory seat trims are one of the simplest ways to bring a fresh, bespoke feel to your Range Rover Vogue or Sport — and they arrive ready to fit the moment the parcel lands. Shop Range Rover Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover & Jaguar · Key Accessories Metallic Jaguar & Land Rover Key Cover — Premium TPU Key Fob Protector A precision-fit metallic TPU key cover engineered to shield your Land Rover or Jaguar key fob from peeling, cracking, drops, and daily wear — available in six bold finishes. Land Rover Jaguar Discovery Soft TPU Metallic Finish 6 Colours Key Fob Protection Direct Fit Overview Land Rover and Jaguar key fobs share a well-documented weakness: the outer plastic shell is prone to peeling, cracking, and splitting over time — often starting at the edges where the key is gripped most frequently. For owners who take pride in every detail of their vehicle, a deteriorating key fob is an unwelcome eyesore that's entirely preventable. This Metallic Key Cover has been designed to slip precisely over your existing Land Rover or Jaguar key fob, creating a durable second skin that absorbs daily shocks, repels spills, and eliminates the plastic peel problem entirely. Crafted from high-quality soft TPU, it conforms to the original key shape without adding unnecessary bulk, keeping button travel crisp and signal transmission completely uninterrupted. Available in six premium metallic finishes — Blue, Gold, Pink, Silver, Black, and Red — the cover lets you personalise your key to match your vehicle's colour, contrast it boldly, or simply keep it clean and classic. It's the small upgrade that gets noticed every time you reach for your keys. What's Included 🔑 TPU Key Fob Cover One cover in your chosen metallic finish ✨ Metallic Finish Coating Pre-applied premium metallic surface treatment 📦 Protective Packaging Delivered securely to avoid transit damage 📋 Fitting Guide Simple step-by-step fitment instructions included Product Highlights Prevents the common Land Rover & Jaguar key plastic peel and split issue Premium soft TPU construction — flexible, durable, and impact-resistant Six metallic colour options: Blue, Gold, Pink, Silver, Black, Red Precision-moulded for a direct, snug fit over your original key fob Maintains full button functionality — no loss of press sensitivity Does not interfere with key signal or remote locking range Protects against drops, scratches, spills, and everyday wear Adds a personalised, premium aesthetic to your key fob Slim profile — no added bulk in pocket or bag No tools required — clips on and off in seconds Compatibility Vehicle Model / Code Years Fit Land Rover Discovery 3 L319 2004–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2024 Direct Fit Land Rover Discovery Sport L550 2015–2024 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Velar L560 2017–2022 Direct Fit Jaguar F-Pace / E-Pace / XE / XF Various 2015–2022 Direct Fit Land Rover Defender L663 (2020+) 2020–2024 Check Key Type Range Rover L460 / Sport L461 New Generation 2022–2026 Check Key Type ⚠ The L663 Defender and new-generation L460/L461 models use a revised key fob profile. Please verify your key shape matches before ordering. Contact us at +44 203 943 9919 if unsure. Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 minutes  ·  Tools Required: None Remove your Land Rover or Jaguar key fob from any existing case or cover. Clean the surface of the key fob with a soft dry cloth to remove dust and oils. Align the TPU cover with the key fob, matching the button cutouts to the correct positions. Press the cover firmly around the edges of the key fob until it clicks snugly into place on all sides. Test all buttons to confirm full functionality and check that the cover sits flush with no lifting at the edges. Note: Ensure all button apertures are correctly aligned before fully pressing the cover into place. Misalignment may restrict button travel. The cover is designed to be removable — simply flex the TPU gently at one corner and peel back to remove. Protect Your Key. Elevate Every Detail. Your Land Rover or Jaguar deserves precision care from the ignition key outward. This metallic TPU cover is the simplest, most affordable way to stop the plastic peel problem before it starts — and look exceptional doing it. Shop All Discovery Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Jaguar, or any of their subsidiaries. All vehicle names, model codes, and brand references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious · Jaecoo J7 · Exterior Storage Side Tool Box for Jaecoo J7 Premium exterior storage solution engineered for adventure-ready J7 builds. Jaecoo J7 Powder-Coated Steel Weather-Resistant Off-Road Ready OEM Fitment Overview The Jaecoo J7 demands purposeful, expedition-grade accessories that match its robust platform and adventure credentials. This Side Tool Box delivers exactly that—combining practical external storage with authentic off-road styling that complements the J7's aggressive stance and overland DNA. Engineered for serious overlanders, campers, and expeditions, this mounting box solves the eternal challenge: where to stow recovery gear, tools, camping equipment, and travel essentials without sacrificing interior cabin space or visual cohesion. The secure side-mounted design integrates seamlessly into the J7's profile while providing weather-sealed, impact-resistant storage. Whether you're building a multi-week expedition rig, weekend basecamp platform, or daily-driver adventure vehicle, this tool box adds genuine capability and unmistakable expedition character to your J7. What's Included 📦 Side Tool Box Assembly Complete storage unit with hinged access ⚙️ Mounting Brackets Engineered for secure J7 fitment 🔩 Installation Hardware All fasteners and seals included Product Highlights Designed specifically for Jaecoo J7 platform Durable weather-resistant construction Rugged off-road styling and presence Additional exterior storage capacity OEM-style secure mounting system Lightweight yet impact-resistant design Perfect for tools, recovery, and travel gear Adventure-inspired aesthetic integration Convenient side-access positioning Frees up valuable interior cabin space Compatibility Vehicle Year Range Status Jaecoo J7 All Years Direct Fit Please confirm your vehicle specification before purchase. Some models may require minor bracket adjustments during installation. Installation Installation Overview Difficulty: Intermediate | Estimated Time: 1.5–2.5 hours Prepare mounting surface on vehicle exterior and ensure area is clean and dry Position mounting brackets against J7 side panel using template or pilot holes Drill mounting holes through body panel into frame or reinforced mounting points Secure brackets using provided fasteners; apply threadlocker to prevent vibration loosening Install tool box assembly onto mounted brackets and verify alignment Tighten all fasteners to specification and test door operation and seal integrity Apply weatherproofing sealant along mounting perimeter to prevent water ingress Allow sealant to cure fully before use Important: Professional installation is strongly recommended to ensure correct fitment, weatherproofing, and secure mounting. Improper installation may result in rattling, water damage, or panel separation. Contact our team for installer referrals in your region. Notes & Considerations Compatibility: Confirm your J7 model year and configuration before ordering. Contact our team at +44 203 943 9919 if you're unsure. Contents: Storage contents shown in product images are for illustration only and not included. Minor Adjustments: Depending on specific trim level or previous modifications, minor bracket or fastener adjustments may be required. Warranty: Covered under our 30-day money-back guarantee and includes full technical support. Ready to Upgrade Your J7? Add purpose-built expedition storage to your Jaecoo J7. This tool box transforms your adventure platform, freeing cabin space and adding authentic off-road capability. Designed by overlanders, for overlanders. Shop Jaecoo J7 Accessories Use code 22GET20 for 20% off any 2 items 4.9★ – 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile, or any official manufacturer. All product names and references are used for compatibility and identification purposes only. Vehicle modifications may affect warranty coverage—consult your manufacturer before installation.

Victorious · Jaecoo J7 · Exterior Roof Rack for Jaecoo J7 – Premium Adventure Storage Engineered heavy-duty roof rack system designed to maximise cargo capacity and enhance your J7's overland-ready aesthetic. Jaecoo J7 2024–Present Aluminium & Steel OEM-Fit Weather-Resistant Overview The Jaecoo J7 is a capable mid-size SUV built for genuine adventure. Whether you're planning extended off-road expeditions, weekend camping trips, or simply need extra storage for everyday life, this Premium Roof Rack System transforms your J7 into a serious expedition vehicle. Engineered from aircraft-grade aluminium and reinforced steel with a corrosion-resistant finish, this roof rack delivers both function and form. It's designed to support roof boxes, cargo carriers, and expedition gear whilst maintaining the structural integrity and handling dynamics of your vehicle. The system features OEM-style fitment and an aggressive overland-inspired aesthetic that complements the J7's rugged character. Built by engineers who understand that SUV ownership demands more than basic storage solutions, this rack is the foundation for serious adventure. What's Included 🎯 Roof Rack Assembly Complete aluminium framework with integrated mounting points ⚙️ OEM Mounting Brackets Pre-engineered to factory roof attachment points 🔩 Installation Hardware Grade 8 stainless fasteners, gaskets, and sealing compound 📋 Detailed Instructions Step-by-step fitting guide with torque specifications Product Highlights Designed specifically for Jaecoo J7 roof architecture Heavy-duty aluminium construction with reinforced cross-members Weather-resistant anodised finish—no rust or corrosion Expands cargo capacity for roof boxes and carriers Compatible with industry-standard roof accessory systems Lightweight yet rigid—engineered for durability without weight penalty Aggressive overland aesthetic enhances J7 appearance OEM-style fitment requires no permanent vehicle modification Supports expedition gear, roof tents, and adventure equipment Professional installation recommended for optimal alignment Compatibility Model Year Range Fitment Jaecoo J7 2024–Present Direct Fit Jaecoo J7 (Other generations) Pre-2024 Not Compatible Before purchasing: Please confirm your vehicle's year and generation. Roof architecture varies between model cycles. Contact our team at +44 203 943 9919 if you're unsure. Installation Notes Difficulty Level: Intermediate | Est. Time: 2–3 hours Inspect your J7's roof attachment points for cleanliness and structural integrity Dry-fit mounting brackets to confirm alignment and bearing points Apply thread-locking compound to all fasteners before final assembly Secure brackets using supplied stainless steel hardware with specified torque values Install main roof rack frame and tighten all cross-member connections Verify weight distribution and load capacity before mounting cargo Allow 24 hours for adhesive seals to cure before transporting heavy loads Weight Limits: Always respect your J7's maximum roof load capacity as specified in your vehicle handbook. Overloading compromises safety, stability, and warranty coverage. What to Expect Durability: Anodised aluminium resists salt spray, UV degradation, and corrosion in harsh off-road environments. This rack is built to withstand years of adventure. Aerodynamics: The sleek profile minimises wind noise and drag during highway driving. You'll notice minimal fuel consumption impact compared to older roof rack designs. Accessory Compatibility: Universal mounting points accept most aftermarket roof boxes, cargo carriers, roof tents, and expedition baskets without additional adapters. Ready to Upgrade Your J7? Transform your Jaecoo J7 into a fully-equipped expedition vehicle. This roof rack is the foundation for serious adventure—designed by engineers who live it. Shop Jaecoo J7 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 Expert support: +44 203 943 9919 Victorious Automotive is not affiliated with Jaecoo, Chery Automobile, or their subsidiaries. Product names and vehicle designations are used for compatibility reference only. All specifications subject to change without notice.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Real Carbon Fibre Rear Spoiler – Range Rover Sport 2023+ (L461) A motorsport-grade rear spoiler crafted from genuine woven carbon fibre — engineered specifically for the 2023+ Range Rover Sport L461 to sharpen its rear profile without compromising its factory-line elegance. Range Rover Sport L461 2023–2026 Real Carbon Fibre Rear Spoiler UV-Resistant Gloss OEM Fitment Exterior Upgrade Aerodynamic Styling Overview The 2023+ Range Rover Sport L461 represents one of the most complete driver-focused SUVs Land Rover has ever produced. Its swept rear architecture and dynamic haunches already hint at performance — but for owners who want to take that visual language one step further, this carbon fibre rear spoiler delivers exactly the right statement without overpowering the vehicle's inherent sophistication. Manufactured from genuine high-grade carbon fibre — not a wrapped or painted composite — this spoiler features a deep-weave twill pattern beneath a UV-stable high-gloss lacquer. The result is a finish that won't fade, yellow, or delaminate over time, even when exposed to extended sunlight and temperature cycling. Every panel is hand-finished to ensure the carbon weave is centred and symmetrical before it ever reaches your vehicle. Designed around the L461's roofline geometry and boot lid profile, this spoiler sits flush with the factory bodywork and integrates through existing mounting points — no drilling, no guesswork. Whether you're specifying a Dynamic SE, Dynamic HSE, or Autobiography, the fitment is consistent and precise across all trims. It's the kind of upgrade that looks like it should have come from the factory. What's Included 🪶 Carbon Fibre Rear Spoiler 1 × full-width spoiler, gloss UV-lacquered finish 🔩 Mounting Hardware All fixings and adhesive tape included where required 📋 Installation Guide Step-by-step fitment instructions included 📦 Protective Packaging Foam-lined, secured for international transit Product Highlights Genuine woven carbon fibre — not a wrap, not a composite lookalike Precision-engineered for the 2023+ Range Rover Sport L461 roofline UV-resistant high-gloss lacquer prevents yellowing and delamination Lightweight construction — adds aerodynamic presence without bulk OEM-style mounting points for a clean, factory-integrated fitment Symmetrical twill weave pattern, hand-checked before dispatch No drilling required — works with existing boot lid fixing points Compatible with all L461 trims including Dynamic SE, HSE, and Autobiography Enhances rear downforce aesthetics inline with Sport's design language Weather-sealed finish suitable for all climates and driving conditions Compatibility Model Generation Year Range Trim Fitment Range Rover Sport L461 2023–2026 Dynamic SE Direct Fit Range Rover Sport L461 2023–2026 Dynamic HSE Direct Fit Range Rover Sport L461 2023–2026 Autobiography Direct Fit Range Rover Sport L461 2023–2026 First Edition Direct Fit Range Rover Sport L494 2013–2022 All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Defender L663 All Years All Trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes  ·  Tools: Basic hand tools + isopropyl alcohol Clean the entire boot lid spoiler mounting area thoroughly using isopropyl alcohol and a lint-free cloth. Allow to dry completely before proceeding. Dry-fit the carbon fibre spoiler to the boot lid to confirm alignment against the factory mounting points and verify the panel gaps are even on both sides. If using the provided adhesive tape, peel the backing and carefully position the spoiler from the centre outwards, applying firm, even pressure along the full length of the contact surface. Where OEM fixing points are used, secure the spoiler using the included hardware and tighten to a snug fit — do not overtighten, as this may stress the carbon structure. Allow adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the boot area to water ingress. Note: Professional installation is strongly recommended to ensure optimal fitment and finish. Incorrect surface preparation or panel misalignment may affect adhesion. If in doubt, consult a qualified automotive body specialist or contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop the Full Range Rover Sport L461 Collection This spoiler is just the beginning. Explore our complete range of exterior, interior, and performance upgrades engineered specifically for the 2023+ Range Rover Sport L461 — all backed by our 30-day money-back guarantee and shipped worldwide via DHL, FedEx, UPS, and TNT. View All L461 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L461 / Vogue L460 · Exterior Trim ABS Carbon Fibre & Matte Black Exterior Door Trim — Range Rover Sport L461 / Vogue L460 (2023–2024) A precision-engineered door surround upgrade that brings defined carbon fibre and matte black contrast to the exterior of your new-generation Range Rover — no cutting, no drilling, no compromise. Range Rover Sport L461 Range Rover Vogue L460 2023–2024 ABS Polymer Carbon Fibre Finish Matte Black No-Drill Fit Exterior Trim Overview The fifth-generation Range Rover Sport L461 and the full-size Range Rover L460 Vogue represent the most refined expressions of the nameplate to date — a blend of restrained elegance and commanding road presence. Both vehicles carry clean exterior lines that reward considered, well-matched enhancements. Poorly chosen trim additions can undermine that factory cohesion instantly. The right ones, however, elevate it. These ABS exterior door trims have been developed specifically for the 2023 and 2024 model years of both the L461 Sport and L460 Vogue. Each piece is formed in high-grade ABS polymer, finished in either a carbon fibre texture or matte black — two finishes that align naturally with the Sport's performance-forward character and the Vogue's darker styling packages. The trims wrap cleanly around the door surrounds, adding visual depth and definition without overwhelming the vehicle's factory aesthetic. Installation is designed to be straightforward. A pre-applied, automotive-grade double-sided adhesive ensures a secure bond to the factory door surface without requiring any permanent modification. Whether you're enhancing a daily driver or refining a recently delivered vehicle, these trims offer a meaningful visual upgrade that holds up to the British weather and the demands of regular use. What's Included 🚪 Full Door Trim Set Complete set covering all door positions — vehicle-specific fit 🔲 Pre-Applied Adhesive Automotive-grade double-sided tape factory-applied to each piece 🧽 Surface Prep Wipe Alcohol prep wipe included for a clean, contaminant-free bond 📄 Installation Guide Step-by-step fitting instructions for a confident first-time install Product Highlights Precision moulded specifically for the L461 Sport and L460 Vogue door profiles High-grade ABS polymer construction — impact-resistant and dimensionally stable Carbon fibre texture finish adds a layered, premium visual character to the exterior Matte black variant pairs cleanly with SVO-specification and blacked-out trim levels Resistant to UV degradation — finish does not fade or yellow under prolonged sun exposure Scratch and abrasion resistant surface — stands up to everyday door contact No drilling, cutting, or permanent modification required for installation Pre-applied automotive-grade adhesive provides a strong, weatherproof bond Flush fitment to factory door panels — no proud edges or misalignment Reversible installation — can be removed cleanly without damaging factory paintwork Compatibility Vehicle Code Years Fitment Range Rover Sport L461 2023–2024 Direct Fit Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 minutes  ·  🔧 Tools Required: None Ensure your vehicle has been parked in a dry, sheltered environment with an ambient temperature above 15°C. Adhesive bonding performance is reduced in cold or damp conditions. Thoroughly clean each door panel area where the trim will be applied. Use the included alcohol prep wipe and allow the surface to dry completely before proceeding. Dry-fit each trim piece to confirm correct positioning and alignment before committing. The contoured edges should sit flush with the door panel with no gaps. Peel the protective backing from the pre-applied adhesive tape on the first trim piece. Do not touch the adhesive surface. Carefully align the piece to the door panel and press firmly into position. Apply consistent pressure along the full length of the trim for a minimum of 30 seconds. Repeat for each remaining trim piece, working methodically from front to rear doors. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the trim to sustained moisture. ⚠ Important: Verify fitment using the product images before purchase. The L461 Sport and L460 Vogue share this fitment, but trim profiles differ from all previous generation models. If you are unsure of your vehicle's code or model year, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Range Rover With Confidence Every product in the Victorious range is selected for fit, finish, and long-term quality. Browse the full collection for your L461 or L460 — and use the code below to save on your second item. Shop Range Rover Sport L461 → Shop Range Rover Vogue L460 → Buy any 2 items and save 20% with code 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L461 · Front Grille LED Black Front Grille – Range Rover Sport L461 (2022–2024+) A direct-fit gloss black front grille with integrated white LED strips — engineered for the L461 Range Rover Sport to deliver a commanding, illuminated presence day and night. L461 LED Lighting 2022–2024+ Gloss Black ABS Construction Direct Fit Plug & Play No Modifications Overview The Range Rover Sport L461 arrived in 2022 as a sharper, more driver-focused evolution of one of Land Rover's most celebrated nameplates. Its front-end design is already bold — but for owners who want to push the aesthetic further, the factory grille leaves room to make a real statement. This is where our LED Black Front Grille steps in. Finished in a deep gloss black with integrated white LED light strips running through the grille slats, this upgrade transforms the front of your L461 Sport into something noticeably more aggressive and modern. Whether parked under streetlights or arriving at night, the illuminated grille creates an unmistakable visual signature that stands well apart from the standard fit. Built from high-grade ABS plastic with a UV-resistant gloss finish, this grille is engineered to endure. It mounts directly onto your existing factory mounting points — no drilling, no cutting, no fabrication. The LED wiring is kept equally straightforward, connecting cleanly to your sidelights or DRLs for a result that looks like it left the factory that way. What's Included 🖤 LED Front Grille Gloss black ABS with integrated white LED strips 🔌 LED Wiring Harness Pre-wired connector for DRL or sidelight integration 🔩 Mounting Hardware Clips and fixings to suit factory mounting points 📄 Fitting Guide Step-by-step installation reference included Product Highlights Integrated white LED light strips for a premium, modern illuminated look Deep gloss black finish — UV-resistant coating built to hold its colour Direct replacement for the factory L461 front grille — no modifications required High-grade ABS construction — lightweight, strong, and impact-resistant Plug-and-play LED wiring harness — connects to DRLs or sidelights Precision-engineered to align with the L461's factory front bumper and bodywork Dramatically changes the front-end character from refined to performance-focused Equally impactful in daylight or at night — a true all-hours upgrade Professional-quality finish that matches OEM paint standards Compatible with all standard L461 Sport trims (excluding factory SV grille variants) Compatibility Vehicle Code Years Trim Fitment Range Rover Sport L461 2022, 2023, 2024+ S, SE, Dynamic SE Direct Fit Range Rover Sport L461 2022, 2023, 2024+ Dynamic HSE Direct Fit Range Rover Sport L461 2022, 2023, 2024+ Autobiography Direct Fit Range Rover Sport L461 2022, 2023, 2024+ SV (factory grille) Not Recommended Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L460 2022+ All Trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes Open the bonnet and carefully remove the front bumper upper trim retaining clips using a trim removal tool. Disconnect the factory grille by releasing the OEM mounting clips along the top and bottom edges — no tools required for most clip points. Carefully unplug any factory wiring connected to the grille surround (if applicable) and set the original grille aside. Offer up the new LED grille to the bumper aperture and press firmly into the factory clip locations until each point clicks securely into place. Route the LED wiring harness through the bumper cavity toward your DRL or sidelight wiring loom — use the existing factory cable channels where possible. Connect the LED harness to your chosen power source (DRLs or sidelights). Test the LEDs before fully securing any loose wiring. Secure the harness with cable ties, refit any removed trim pieces, and carry out a final visual inspection to confirm alignment and fit. ⚠ Note: Professional installation is recommended for the LED wiring stage. Incorrect wiring connections can affect vehicle electronics. Always disconnect the battery before beginning any electrical work. If in doubt, consult a qualified automotive electrician. Aggressive. Illuminated. Unmissable. Whether you're building a blacked-out Sport or simply want a front end that commands a second look, this grille delivers. Shop the full L461 Range Rover Sport collection for more upgrades that match this aesthetic perfectly. Shop All L461 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Range Rover L460 / L461 · Interior Upgrades Aluminum Alloy Steering Wheel Shift Paddles for Range Rover Vogue L460 & Sport L461 (2023+) Precision-machined aluminum shift paddles engineered to replace the factory units on the 2023 Range Rover Vogue L460 and Sport L461 — delivering a more tactile, performance-oriented driving feel without any permanent modification. Range Rover Vogue L460 Range Rover Sport L461 2023+ Aluminum Alloy Direct Fit No Drilling Required ISO9001 Certified Interior Upgrade Overview The 2023 Range Rover Vogue L460 and Range Rover Sport L461 represent the most advanced generation of Land Rover's flagship lineup — featuring refined interiors, sophisticated driver interfaces, and a level of cabin detail that owners rightly scrutinise. For drivers who prefer manual gear shifts via paddle control, the factory-fitted paddles can feel underwhelming relative to the overall quality of the cabin. These aluminum alloy replacements address that directly. Crafted from high-grade aluminum alloy and finished to complement the L460 and L461 interior palettes, these shift paddles are engineered as direct-fit replacements for 2023 model year vehicles. The increased surface area and solid metal construction offer a noticeably more positive click when changing gears — something that becomes particularly satisfying on winding roads or during spirited driving in Dynamic mode. Installation is a clean, tool-free process using pre-applied double-sided automotive-grade adhesive tape. There's no need to disassemble your steering column or interfere with any electronics. The paddles sit flush against the existing mounts and feel entirely at home in a cabin of this calibre — a subtle but meaningful upgrade that enthusiast owners immediately appreciate. What's Included 🏎️ Left Shift Paddle (–) Downshift paddle, aluminum alloy, pre-taped 🏎️ Right Shift Paddle (+) Upshift paddle, aluminum alloy, pre-taped 🔧 Pre-Applied Adhesive Automotive-grade double-sided tape included on each paddle 📦 Protective Packaging Paddles shipped in protective wrap to prevent transit damage Product Highlights Precision-machined from high-grade aluminum alloy for a solid, premium feel Direct-fit design for 2023 Range Rover Vogue L460 and Sport L461 No drilling, no wiring — installs with pre-applied adhesive tape Increased paddle surface area for more confident gear changes Substantial weight and click response compared to factory plastic units Finished to complement factory interior trims on L460 and L461 models 100% brand new — manufactured in ISO9001 certified facility Available in multiple colour finishes to suit your interior specification Compatible with Dynamic, Comfort, and Sport driving modes Fully reversible installation — no permanent modification to your vehicle Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L460 2023–2026 Direct Fit Range Rover Sport L461 2023–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2021 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🛠 Tools Required: None Begin with the steering wheel in its neutral (straight-ahead) position to give yourself the best access to both paddle areas. Thoroughly clean the surface of the existing factory shift paddles using an isopropyl alcohol wipe. Allow to dry completely before proceeding — this ensures maximum adhesive bond strength. Carefully peel the protective backing from the pre-applied double-sided adhesive tape on the reverse of the new aluminum paddle. Align the new paddle precisely over the factory paddle, ensuring it sits flush with no overhang on either edge. Press firmly and hold for 30–60 seconds to activate the adhesive bond. Repeat the process for the second paddle on the opposite side of the steering wheel. Leave the vehicle undisturbed for at least 2 hours before driving to allow the adhesive to fully cure and achieve maximum hold. ⚠ Important: These paddles are designed to overlay the existing factory paddle extensions. If your L460 or L461 is fitted with a heated steering wheel or any non-standard column configuration, verify fitment before installation. Do not apply to dirty, oily, or wet surfaces as this will significantly reduce adhesive performance. Upgrade Your L460 or L461 Interior Today Shop the full interior accessory range for your Range Rover Vogue L460 and Range Rover Sport L461 at Victorious Automotive — trusted by over 12,300 verified Range Rover owners worldwide. Shop Range Rover L460 Accessories Shop Range Rover Sport L461 Accessories Use code 22GET20  — 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Range Rover, Vogue, Sport, L460, and L461) are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Vogue L460 · Interior Accessories Range Rover L460 Steering Wheel Cover – Carbon Fibre & Gloss Black A precision-fit steering wheel cover for the Range Rover Vogue L460 (2022–2026), available in carbon fibre or high gloss black — protecting and elevating the most-touched surface in your cabin. Range Rover L460 2022–2026 Carbon Fibre Option High Gloss Black Option Self-Adhesive Fit Interior Trim Vogue No Drilling Required Overview The Range Rover L460 represents the fifth generation of Land Rover's flagship luxury SUV — a cabin environment built to the highest standards, where every surface is considered. The steering wheel sits at the very centre of that experience, and it's the one element your hands never leave. Over time, even premium OEM finishes show wear, and the standard wrap can lose its visual edge against the rest of the interior's refinement. This steering wheel cover from Victorious Automotive has been developed specifically for the L460 platform, matching the wheel's exact geometry and spoke layout. Available in two distinct finishes — real-look carbon fibre weave or deep high gloss black — both options are crafted to complement the interior palette of the 2022–2026 Range Rover Vogue, whether your cabin is dressed in Ebony, Espresso, or Ivory. Installation requires no heat guns, no adhesive preparation, and no specialist tools. Each cover arrives with pre-applied, automotive-grade self-adhesive backing that bonds firmly and cleanly to the steering wheel surface, leaving no residue if removed. The result is a factory-looking upgrade that takes minutes to achieve and lasts for the life of the vehicle. What's Included 🎛️ Steering Wheel Cover 1x cover in your chosen finish — carbon fibre or high gloss black 🔧 Pre-Applied Adhesive Automotive-grade self-adhesive pre-applied to the reverse 🧴 Preparation Wipe Surface cleaning wipe for optimal adhesion 📄 Installation Guide Step-by-step printed instructions included Product Highlights Precision-engineered fit for the Range Rover L460 steering wheel geometry Available in carbon fibre weave or deep high gloss black finish Pre-applied automotive-grade self-adhesive — no tools required Clean, residue-free removal if needed at a later date Protects OEM wheel surface from daily wear and UV discolouration Designed to complement all L460 interior colour options Lightweight construction — no impact on wheel balance or airbag function Durable, high-clarity finish that resists fingerprints and scuffs Installation completed in under 10 minutes with no professional fitting needed Sourced and quality-checked exclusively for Victorious Automotive Compatibility Vehicle Model Code Year Range Fit Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2021 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Park your vehicle on a level surface and ensure the steering wheel is in the straight-ahead, centred position before beginning. Use the included preparation wipe to thoroughly clean the steering wheel surface area where the cover will be applied. Allow to dry fully — approximately 60 seconds. Carefully peel back a small section of the adhesive backing on the cover to expose the adhesive. Do not remove the full backing at once. Align the cover precisely with the steering wheel spoke and rim position, using the centred spoke as your reference point. Once aligned, gradually peel the remaining backing away while pressing the cover firmly into place from the centre outward, eliminating any air pockets as you go. Apply firm, even pressure across the entire cover surface for 30–60 seconds to ensure full adhesive contact. Allow 1–2 hours before driving for optimal bond strength. ⚠ Important: Do not apply to a wet, oily, or recently cleaned surface that has not fully dried. Avoid installation in temperatures below 10°C, as adhesive performance may be reduced. This cover is designed for the decorative trim sections of the steering wheel only and does not cover or interfere with airbag deployment zones. Elevate Your L460 Interior The steering wheel is the most tactile part of your Range Rover's cabin. This cover ensures it looks as refined as the day your vehicle left the factory — and stays that way. Browse the full Range Rover L460 interior collection at Victorious Automotive. Shop Range Rover L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.