Key Covers

Victorious Automotive · Land Rover Discovery · Interior Trim Rose Gold Steering Wheel Button Decorative Frame — Land Rover Vogue, Sport, Discovery & Evoque 2017–2020 A precision-cut rose gold trim frame that transforms your steering wheel controls into a polished, luxury focal point — no tools, no hassle, no compromise. Discovery 5 (2017–2020) Range Rover Sport L494 Range Rover Vogue L405 Evoque L538 Rose Gold Finish Peel & Stick Laser Cut No Drilling Required Interior Trim 2017–2020 Overview The Land Rover Discovery 5, Range Rover Sport L494, Range Rover Vogue L405, and Range Rover Evoque L538 all share a refined interior philosophy — one where every surface, every detail, is expected to meet a high standard. The steering wheel, in particular, is the most tactile point of contact between driver and vehicle, and its button surrounds are among the most frequently noticed details in the cabin. This Rose Gold Steering Wheel Button Decorative Frame is designed to complement that philosophy precisely. Crafted with a premium rose gold finish and cut to exact tolerances using laser technology, each frame sits flush against the steering wheel button housing — eliminating the factory plain-plastic look and replacing it with something that genuinely looks like it belongs in a higher specification trim level. The application method is intentional: a high-strength peel-and-stick backing bonds cleanly to the existing surface without requiring removal of steering wheel components, adhesives, or specialist tools. The result is a lasting, rattle-free upgrade that looks factory-fitted from day one. What's Included 🔲 Decorative Frame × 2 Matching rose gold button surround frames for left and right steering wheel control clusters 📋 Pre-Applied Adhesive Backing High-bond 3M-style tape pre-fitted to each frame for immediate application 🧼 Cleaning Preparation Wipe Surface prep wipe included to ensure maximum adhesion on installation 📄 Installation Guide Step-by-step instruction sheet included in the package Product Highlights Precision laser-cut to match OEM steering wheel button housing dimensions exactly Premium rose gold finish — sophisticated, warm, and distinct from standard chrome trims Tool-free peel-and-stick installation — no disassembly of steering wheel required High-strength adhesive backing provides a permanent, rattle-free bond Compatible across four Land Rover and Range Rover model lines (2017–2020) Does not obscure, interfere with, or impede any steering wheel button function Resistant to UV fading and the temperature fluctuations typical of vehicle interiors Available in multiple colour options — rose gold, silver, carbon and gloss black variants Low-profile fit sits flush with surrounding trim for a factory-finished appearance Reversible upgrade — frames can be removed cleanly without damage to OEM surfaces Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Range Rover Vogue L405 2017–2020 Direct Fit Range Rover Sport L494 2017–2020 Direct Fit Range Rover Evoque L538 2017–2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 (2019+) 2019–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Easy — No Tools Required Park your vehicle and ensure the steering wheel is in a neutral, centred position with the engine off. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight. Use the included preparation wipe to thoroughly clean the surface of the steering wheel button housing. Remove any dust, oils, or residue and allow the surface to dry completely before proceeding. Test-fit both decorative frames against the button housings without removing the adhesive backing — confirm alignment, orientation, and that all button cutouts line up correctly. Peel the protective film from the adhesive backing on the first frame. Carefully align the frame over the button housing, starting from one edge and pressing firmly into place to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of the frame for 30–60 seconds to activate the adhesive bond. Repeat for the second frame on the opposite side. Allow the adhesive to cure for a minimum of 2 hours before regular use. Avoid operating the steering wheel controls forcefully during this initial cure period. ⚠ Please Note: Verify your specific vehicle's steering wheel button housing design before purchasing. While this frame is compatible with the 2017–2020 model years listed, minor manufacturing variations can occasionally exist across production runs and regional markets. If in doubt, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Elevate Every Drive At Victorious Automotive, every product we carry is chosen because it genuinely enhances the ownership experience of a Land Rover or Range Rover. This rose gold steering wheel frame is one of those rare upgrades — small in scale, significant in impact. Browse our full Discovery 5 and Range Rover collections to find everything your vehicle deserves. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

```html Mini · R56 · Roof Vinyl Checker Union Jack Roof Vinyl for Mini Cooper R56 Iconic laser-cut vinyl roof upgrade with pre-applied adhesive for effortless installation and signature British heritage styling. R56 2006–2014 High-Quality Vinyl Laser-Cut Pre-Applied Adhesive Overview The Mini Cooper R56 is a cult classic, celebrated for its fun-to-drive character and iconic British DNA. This Checker Union Jack Roof Vinyl is engineered to amplify that heritage aesthetic while delivering lasting durability and straightforward fitment. Our laser-cut vinyl is engineered to conform perfectly to your R56's roof contours. High-grade adhesive backing ensures a permanent bond without damage to paintwork, while the pre-applied formula eliminates mess and guesswork during installation. Whether you're restoring period-correct Mini character or adding contemporary flair, this roof vinyl represents a flagship design statement—bold, recognisable, and unmistakably British. What's Included 🎨 Checker Union Jack Roof Vinyl Laser-cut, pre-applied adhesive 📋 Installation Guide Step-by-step photo instructions 🛡️ 30-Day Guarantee Full money-back promise Why Choose This Roof Vinyl Laser-cut for flawless fitment—no trimming required High-quality vinyl resists UV fading and weathering Pre-applied adhesive ensures consistent bond Removable without damage to original paint Iconic Checker Union Jack design—instantly recognisable DIY-friendly installation in under 30 minutes Works exclusively with R56 models (2006–2014) Premium alternative to generic roof decals Complements factory Mini styling Made to flagship design standards Compatibility Mini Model Generation Years Fitment Cooper R56 2nd Gen (Hatchback) 2006–2014 Direct Fit Cooper S R56 2nd Gen (Hatchback) 2006–2014 Direct Fit Cooper JCW R56 2nd Gen (Hatchback) 2006–2014 Direct Fit Countryman R60 1st Gen (Crossover) 2010–2017 Not Compatible Cooper R50 1st Gen (Hatchback) 2001–2006 Not Compatible Clubman R55 2nd Gen (Estate) 2007–2015 Not Compatible Installation Notes Difficulty Level: Easy | Time: 20–30 minutes Prepare the roof: Clean thoroughly with mild soap and water. Dry completely with a microfibre cloth. Allow 1 hour drying time in a warm garage. Position the vinyl: Lay the vinyl on the roof without applying pressure. Align the design centrally, accounting for roof slope. Apply from centre outward: Starting at the roof's peak, use a squeegee or card to press the vinyl firmly, working toward the edges. Use slow, deliberate pressure. Smooth out air bubbles: If small bubbles appear, use the squeegee to gently push them toward the nearest edge. Trim excess (if needed): Using a sharp craft knife, carefully trim any overhanging vinyl along the roof edges. Work slowly to avoid cutting the paint. Final check: Run your hand over the entire surface to confirm adhesion. Allow 24 hours of cure time before washing. Important: Install in warm conditions (15–25°C). Cold weather reduces adhesive activation. Do not wash the vehicle for 48 hours after installation. If removal is necessary, gently heat the vinyl with a hair dryer and peel slowly to avoid paint damage. Ready to Transform Your R56? Add British iconic style to your Mini Cooper with this laser-cut, flagship Checker Union Jack Roof Vinyl. Pre-applied adhesive means no hassle—just perfect fitment and lasting character. Shop Now Use code 22GET20 for 20% off when buying 2 or more items. 4.9/5 · 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mini Cooper, BMW Group, or any official Mini brand entity. All product names, logos, and trademarks remain the property of their respective owners. This product is designed as an aftermarket accessory and is sold independently. Mini and Union Jack are registered trademarks used for identification purposes only. ```

Victorious Automotive · BMW · Interior Styling BMW M-Sport Steering Wheel Trim – Silver ABS – 2019–2023 Precision-fit steering wheel accent that elevates your interior with understated M-Sport elegance and premium durability. 2019–2023 M-Sport ABS Plastic Silver Finish Interior Trim Adhesive Install Overview If you drive a 2019–2023 BMW and want a quick, visible upgrade to your steering wheel surround, this silver M-Sport trim delivers understated refinement. The steering wheel is one of your hands' primary contact point with the car—it deserves intentional styling. This trim is engineered from high-quality ABS plastic, finished in a rich silver tone that complements both modern and classic BMW interiors. The trim is precision-cut to fit snugly around the steering wheel, creating a factory-spec appearance without any gaps or misalignment. Installation is straightforward: clean the mounting surface, apply the automotive-grade adhesive tape, and secure in place. Backed by ISO9001 certification, this piece combines aesthetic impact with proven durability. It resists UV degradation, maintains its finish under sunlight, and won't crack or warp with temperature changes. A subtle detail that transforms how your cockpit feels every time you get behind the wheel. What's Included ✦ Steering Wheel Trim Silver ABS plastic, pre-cut for precision fitment ⚙ Automotive Adhesive Tape High-tack bonding strip for secure, permanent installation 📋 Installation Guide Step-by-step instructions with prep and application notes Product Highlights Precision fitment for 2019–2023 BMW models—no trimming or modification needed High-quality ABS plastic with silver finish—durable, UV-resistant, scratch-resistant ISO9001 certified manufacturing—meets strict quality and material standards Simple adhesive installation—no tools, drilling, or professional labor required M-Sport aesthetic—subtle, aggressive detailing that enhances cockpit presence Lightweight design—adds visual impact without affecting steering feel or weight distribution Maintains factory appearance—seamless integration with OEM interior design language Temperature stable—won't warp, crack, or peel in extreme heat or cold Three colour options available—Silver, Red, and Carbon Fiber to match your style Easy removal—adhesive is strong but can be gently peeled away without damage to steering wheel Compatibility BMW Model Year Range Status 2-Series (F22, F23) 2019–2023 Direct Fit 3-Series (G20, G21) 2019–2023 Direct Fit 4-Series (G22, G23) 2020–2023 Direct Fit 5-Series (G30, G31) 2017–2023 Direct Fit M440i, M440i xDrive 2021–2023 Direct Fit M440i M-Sport Package 2021–2023 Direct Fit X3 (G01) 2018–2023 Not Compatible X5 (G05) 2019–2023 Not Compatible Note: Please verify your steering wheel design against product images before purchase. Some M-Sport models may require minor fitment adjustment. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure about compatibility. Installation Difficulty: Easy | Time: 15–20 Minutes Prepare the surface. Clean the steering wheel trim area thoroughly with a lint-free cloth and isopropyl alcohol. Allow to dry completely for at least 5 minutes. Position the trim. Carefully align the silver ABS trim against the steering wheel. Check alignment from multiple angles before committing adhesive. Apply adhesive tape. Remove the backing from the supplied automotive adhesive tape. Press firmly along the entire length of the trim, working from centre outward to eliminate air bubbles. Set and cure. Apply moderate pressure for 30 seconds. Allow adhesive to cure for 24 hours before using the steering wheel. Avoid washing or touching the trim during this period. Final inspection. Once cured, verify that the trim is fully bonded with no gaps, lifting, or movement when gently flexed. ⚠ Important: Do not install this trim on a warm steering wheel. Allow your vehicle interior to cool to room temperature first. The adhesive bonds best on cool, clean surfaces and will weaken if applied in direct sunlight or excessive heat. Specifications Property Value Material ABS Plastic (High-Impact) Finish Silver Metallic Length 30 cm Height 10 cm Width 15 cm Weight 200 g Type Interior Moulding / Trim Installation Method Automotive Adhesive Tape (Included) Certification ISO9001 Warranty 30-Day Money-Back Guarantee Ready to Refine Your Cockpit? This silver M-Sport steering wheel trim is a small detail with outsized visual impact. It's the kind of upgrade that makes you smile every time you grip the wheel, and it's engineered to last the life of your vehicle. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 📦 Worldwide Shipping – DHL, FedEx, UPS, TNT ↩ 30-Day Guarantee – Full Money Back ☎ +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with BMW, BMW M, Land Rover, Range Rover, Jaguar Land Rover (JLR), or any other vehicle manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for fitment only and does not imply endorsement, sponsorship, or authorisation by any manufacturer.

BMW · Interior · Steering Wheel Trim Carbon Fibre M-Sport ABS Steering Wheel Trim Premium interior upgrade with authentic carbon fibre styling for BMW cockpits (2018–2020). 2018–2020 Carbon Fibre ABS Plastic M-Sport Interior Moulding Overview If you own a BMW from 2018 to 2020, the interior is the first thing you and your passengers experience every time you get behind the wheel. Stock steering wheel bezels feel generic and dated. This carbon fibre M-sport ABS steering wheel trim upgrades that critical focal point with aggressive, factory-correct styling that transforms your cockpit instantly. The trim is engineered from premium ABS plastic with a genuine carbon fibre finish, delivering the visual impact of carbon without the weight penalty or cost of true carbon fibre. The LLK2355 model fits seamlessly into the M-sport aesthetic, adding depth and aggression to your dashboard. Available in three finishes—silver, red, and carbon fibre—so you can match your car's personality. Installation is straightforward: the back is pre-fitted with automotive-grade adhesive tape, so no drilling, no glue mess, no permanent modifications. Fits 2018–2020 BMW models. ISO9001 certified manufacturing ensures durability and precision fit. This is the kind of detail that separates enthusiasts from the ordinary. What's Included 📦 Carbon Fibre Steering Wheel Trim LLK2355 model, pre-taped 🔧 Automotive Adhesive Tape Pre-applied, ready to install 🎨 Three Finish Options Silver, red, or carbon fibre ✅ ISO9001 Certified Quality-assured manufacturing Product Highlights M-sport styling integrated into steering wheel bezel Premium carbon fibre finish on durable ABS plastic Lightweight design—only 200g Pre-taped with automotive-grade adhesive Three colour options: silver, red, carbon fibre Fits 2018–2020 BMW models perfectly No drilling or permanent modifications required ISO9001 quality-certified manufacturing Compact dimensions: 30 × 15 × 10 cm Easy 5-minute installation process Fitment & Compatibility BMW Model / Year Compatibility BMW 3 Series (2018–2020) Direct Fit BMW 5 Series (2018–2020) Direct Fit BMW X3 / X4 / X5 (2018–2020) Direct Fit BMW M-Sport Models (2018–2020) Direct Fit BMW Models (2017 or earlier) Not Compatible BMW Models (2021 and later) Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 5 minutes Prepare the steering wheel. Clean the steering wheel bezel area with a soft, dry cloth. Remove any dust, oil, or residue. Position the trim. Align the carbon fibre trim with the steering wheel bezel, ensuring it sits flush and level. Apply the trim. Press firmly from the centre outward to activate the pre-applied adhesive tape. Hold for 30 seconds. Check alignment. Step back and visually confirm the trim is straight and sits evenly on all edges. Let cure. Wait 24 hours before heavy use to allow the adhesive to fully bond. Important: Ensure your steering wheel is clean and dry before installation. Do not apply in temperatures below 10°C or above 40°C, as adhesive performance may be compromised. Upgrade Your Cockpit Today Small details make the biggest impact. This steering wheel trim is the kind of upgrade that catches your eye every single drive—and impresses anyone who gets in your car. M-sport aggression, authentic styling, zero hassle. Add to Cart Use code 22GET20 for 20% off when you buy 2+ items. 4.9/5 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping ✓ Expert support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names and vehicle designations are used for fitment reference only. Product specifications subject to change without notice.

Victorious · BMW · Interior Trim Red ABS Plastic Steering Wheel Trim for BMW M-Sport 2018–2020 Precision-engineered interior upgrade that combines factory-fit accuracy with vibrant aesthetic refinement for your M-Sport steering wheel. F87 M2 · F80 M3 · F82 M4 2018–2020 ABS Plastic Easy Installation Red/Silver/Carbon Overview BMW M-Sport models demand finishes that match their precision engineering and aggressive aesthetic. This red ABS plastic steering wheel trim delivers exactly that—a boutique interior accent that elevates the cabin without requiring extensive modification. Manufactured from premium-grade ABS plastic with a durable textured finish, this trim sits perfectly on the steering wheel's upper spoke section. Its contours are mapped directly to the 2018–2020 M-Sport platform, ensuring seamless integration with zero gaps or misalignment. The red finish complements carbon fiber trim, brushed aluminum, and factory leather beautifully. Installation takes under 15 minutes using the included automotive adhesive tape. No tools, heat, or fasteners needed. The finish is resistant to UV degradation and daily wear, maintaining its appearance through seasons of commuting and spirited driving. What's Included 🎨 Steering Wheel Trim Red ABS plastic, precision-molded 🔌 Adhesive Tape Automotive-grade dual-sided 📋 Installation Guide Step-by-step with tips Product Highlights Precision-engineered for perfect factory-fit alignment Premium ABS plastic with textured finish UV-resistant and fade-proof color Quick adhesive installation—no drilling or clips Designed exclusively for M-Sport models 2018–2020 Available in red, silver, and carbon fiber variants Seamless integration with OEM interior trim Durable enough for daily commuting and spirited driving Removable without permanent damage to wheel Enhances cabin personalization and visual impact Compatibility BMW Model Year Compatibility M2 (F87) 2018–2020 Direct Fit M3 (F80) 2018–2020 Direct Fit M4 (F82) 2018–2020 Direct Fit M340i / M440i 2019–2020 Direct Fit Pre-2018 M-Sport 2013–2017 Not Compatible Non-M Models Any Year Not Compatible Installation Difficulty Level: Beginner | Time: 10–15 minutes Prepare the wheel: Clean the steering wheel's upper spoke section thoroughly with a microfiber cloth and mild soap. Allow to dry completely. Remove adhesive backing: Carefully peel away the protective film from one side of the included adhesive tape, exposing the sticky surface. Apply tape to trim: Press the adhesive tape firmly onto the back of the red steering wheel trim, ensuring full contact across all edges. Position on wheel: Align the trim with the steering wheel's upper spoke. Start from the center and press outward to eliminate air bubbles. Secure and cure: Apply gentle pressure for 30 seconds, then allow adhesive to cure for 2–4 hours before driving. Final inspection: Verify all edges are flush and no gaps exist between trim and wheel surface. Note: Ensure the wheel surface is completely dry before applying adhesive. Moisture will compromise bond strength. If removing the trim later, use isopropyl alcohol to dissolve residual adhesive gently. Ready to Elevate Your M-Sport Interior? This red steering wheel trim transforms your cabin into a more personalized, visually cohesive space. Pair it with other M-Sport accents for a complete interior refresh. Shop Red Steering Wheel Trim Use code 22GET20 for 20% off when you order 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL shipping 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW subsidiary. All product names and references are used for compatibility identification only. Modifications made to your vehicle may void manufacturer warranty. Always consult your BMW dealer before installing aftermarket components.

Victorious Automotive · Mercedes G Class · Exterior Trim Glossy Black Rear Side Air Vent Trim for Mercedes Benz G Class Premium ABS vent trim that adds refined detail and aggressive character to your G-Class exterior. G Class ABS Material Glossy Black Carbon Fiber Option Adhesive Installation Overview The Mercedes-Benz G Class demands refinement at every angle. These Glossy Black Rear Side Air Vent Trims are engineered to enhance your G-Class's aggressive stance while adding a touch of premium detailing that catches the eye. Crafted from ISO9001-certified ABS plastic, these trims replace the standard vent surrounds with sleek, contemporary styling available in rich glossy black or dynamic carbon fiber finishes. Each pair is precision-fitted to match your vehicle's body contours and designed for hassle-free installation using supplied automotive-grade adhesive tape. Whether you're refining your G-Class for the road or completing a subtle exterior upgrade, these trims deliver understated luxury with zero compromise on durability or fitment quality. What's Included ✦ 1 Pair of Rear Side Air Vent Trims Left and right, precision-fitted ✦ Automotive Adhesive Tape Pre-applied for secure bonding ✦ Installation Guide Step-by-step surface prep and fitment ✦ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights ISO9001-certified ABS construction for durability Available in glossy black and carbon fiber finishes Custom-fit design for select G Class model years Pre-applied automotive adhesive for secure bonding Lightweight at just 200g per pair Refined aesthetics that complement OEM styling Resistant to UV fade and weathering No drilling or permanent modifications required Easy removal without surface damage Paired with expert installation support Compatibility Model Year Range Variant Fitment 2019–2024 G Class (W464) Direct Fit 2015–2018 G Class (W463A) Direct Fit 2000–2014 G Class (W463) Not Compatible 2024+ G Class (New Generation) Not Compatible Note: Please verify your vehicle's year and generation before ordering. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to confirm exact fitment. Installation ⏱ Difficulty: Beginner | Time: 15–20 minutes Prepare the surface: Clean the rear side air vent area thoroughly with a microfiber cloth and isopropyl alcohol. Ensure the surface is completely dry. Inspect fitment: Dry-fit each trim to confirm alignment and sizing. Do not apply adhesive tape yet. Position the trim: Carefully align the left trim to the rear side vent. Check all edges for flush contact with the vehicle body. Apply adhesive: Peel back the protective backing from the adhesive tape and press firmly onto the vent area, working from the center outward to avoid air bubbles. Repeat on right side: Follow steps 3–4 for the right rear side vent trim. Allow curing time: Do not disturb the vehicle for at least 24 hours to allow full adhesive bond. ⚠ Installation is permanent. Please confirm fitment before applying adhesive. If unsure, contact our team for guidance. Why Victorious? We've been the trusted source for premium Mercedes G Class and Land Rover accessories since day one. Every product in our collection is tested for fitment, durability, and finish quality. With over 12,300 verified 4.9-star reviews, our customers know we stand behind every upgrade. Ready to Elevate Your G Class? Add these refined rear side vent trims to your Mercedes and experience the difference that premium detailing makes. Fast worldwide shipping, expert support, and a 30-day money-back guarantee. Shop G Class Accessories Use code 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 · 12,300+ Reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent accessory retailer and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility is provided in good faith; please verify fitment before purchase.

Victorious · Mercedes G-Class · Exterior Trim Rear Bumper Trim for Mercedes-Benz G-Class W463 Premium carbon fibre and black trim options that elevate your G Wagon's rear bumper with sophisticated, purpose-built detailing. W463 G-Wagon ABS Material Carbon Fibre Option Direct Fit Tool-Free Install Overview The Mercedes-Benz G-Class W463 commands respect on every terrain. Its iconic silhouette deserves equally iconic detailing. These rear bumper trims are engineered to enhance that commanding presence, adding precision-crafted edges and refined finishes that complement the G Wagon's unmistakable geometry. Each trim is machined from high-quality ABS thermoplastic and finished in either deep gloss black or premium carbon fibre weave. They're designed for direct fitment to the W463 rear bumper, requiring no drilling, cutting, or permanent modifications—just clean, confident installation that respects your vehicle's integrity. Whether you're upgrading for aesthetics or adding a functional accent that catches light and shadow, these trims deliver the refinement G-Class owners expect from their investment. What's Included 🎨 2 x Rear Bumper Trims Left and right pair for complete coverage 📖 Installation Manual Step-by-step guide with torque specs 🔒 Grade-A Fasteners Stainless hardware included ✓ Fitment Guarantee 30 days to confirm perfect fit Product Highlights Premium ABS construction with UV-resistant finishes Two luxury finishes: gloss black or carbon fibre weave Direct-fit design—no cutting or modifications required Seamless integration with factory bumper geometry Durable, impact-resistant thermoplastic materials Weather-sealed for year-round protection Lightweight design—no performance impact Easy tool-free installation (10–15 minutes) Stainless fasteners prevent corrosion Maintains factory warranty compliance Compatibility Model Generation Years Fitment Mercedes-Benz G-Class W463 (Classic/Facelift) 2004–2018 Direct Fit Mercedes-AMG G63 W463 2004–2018 Direct Fit Mercedes-AMG G65 W463 2004–2018 Direct Fit Mercedes-Benz G-Class W464 (New Generation) 2018+ Verify Fitment Note: Confirm your model year and W463 designation before purchase. W464 fitment requires separate verification. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) for compatibility confirmation. Installation Difficulty Level: Easy | Time: 10–15 Minutes Prepare. Clean the rear bumper surface with mild soap and water. Dry completely and allow 15 minutes for full cure. Position. Align the left trim against the bumper edge. Start fasteners by hand to ensure flush contact. Secure. Tighten fasteners in a cross pattern using the provided hex key. Do not over-tighten (recommended torque: 1.5–2.0 Nm). Repeat. Install the right trim following the same process. Inspect. Check both trims for gaps or misalignment. Adjust fasteners if needed. Final Check. Step back and confirm even panel gaps and symmetrical fitment. Professional Installation Recommended: While straightforward for experienced DIY enthusiasts, we recommend professional fitment to ensure perfect alignment and preserve your warranty. Contact a local Mercedes specialist. Complete Your G-Class Vision These rear bumper trims are the finishing detail your G Wagon deserves. Engineered for precision, built for durability, backed by a 30-day money-back guarantee. Shop G-Class Collection Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars ✓ 12,300+ Verified Reviews 🌍 Worldwide DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, AMG, or Daimler AG. All product names and logos are registered trademarks of their respective manufacturers. This product is designed for aftermarket customisation and does not void manufacturer warranty when installed correctly.

BMW · Compact Sport · Exterior Styling BMW M4 Style Black Wing Mirrors – 2014–2020 Models OEM-inspired M4 aesthetics with aggressive black finish and secure factory fit for modern BMW performance cars. 2014–2020 M4 Style ABS Material Glossy Black Direct Fit Protection Overview These M4 Style Wing Mirror covers transform the front fascia of your 2014–2020 BMW with the aggressive aesthetic of the M4, bringing motorsport-inspired design to your daily driver. Engineered in durable ABS plastic, they replace worn or damaged mirror covers while delivering the premium gloss black finish BMW enthusiasts demand. Designed for seamless integration across 1 Series, 2 Series, 3 Series, 4 Series, X1, and M2 platforms, these mirrors bolt directly in place with zero modification. The semi-gloss finish catches light beautifully and resists UV degradation, ensuring your investment looks sharp season after season. Whether you're refreshing tired trim or building a cohesive M-package aesthetic, these covers deliver the visual impact and durability that separates serious builds from off-the-shelf upgrades. What's Included 🪞 Left & Right Mirror Covers Pair of M4 style covers, ready to fit 🔧 Installation Hardware All mounting clips and fasteners included 📋 Fitment Guide Vehicle-specific compatibility reference Product Highlights Premium ABS material resists impact and UV fade Glossy black finish matches M-spec interiors and aerodynamic kits Direct OEM replacement—no drilling or trimming needed Protects original mirror housings from road debris and scratches Lightweight design adds zero unsprung weight Secure clip retention won't rattle or shift during spirited driving Easy 15-minute swap—no special tools required Maintains factory mirror function and safety features intact Available in Bright Black and Sub Black finishes Perfect for M-package builds and sport-spec aesthetics Compatibility Matrix Model Generation Year Range Fitment 1 Series Hatchback F20 / F21 2012–2016 Direct Fit 2 Series Coupe F22 / F23 2014–on Direct Fit 3 Series Sedan & Touring F30 / F31 2012–on Direct Fit 4 Series Coupe, Cabriolet & Gran Coupe F32 / F33 / F36 2014–on Direct Fit X1 SAV E84 2013–2015 Direct Fit M2 Coupé F87 2014–on Direct Fit M3 Sedan F80 2014–on Not Compatible M4 Coupe & Cabriolet F82 / F83 2014–on Not Compatible Compatibility Check: M4 and M3 models feature integrated mirror design and are not compatible with these covers. Confirm your vehicle code (VIN decoder or Vin.Decoder.com) before purchase. Installation Guide Difficulty Level: Beginner | Time: 15–20 minutes per side Park on level ground and engage handbrake. Open driver's door fully. Locate the three retention clips on the underside and inner edge of the factory mirror cover. Gently pry the factory cover away from the mirror housing using a soft plastic trim tool or spoon. Work from the top down to avoid cracking the plastic. Disconnect any wiring harness for mirror heating or puddle lights (if equipped). Set factory cover aside for storage or resale. Position the M4 style cover over the mirror housing and press down firmly until all three clips engage with an audible click. Reconnect any disconnected wiring, ensuring connectors are seated fully. Repeat steps 1–6 for the passenger-side mirror. Step back and inspect both covers for alignment and gloss finish consistency. Note: Light variations in gloss depth and colour tone between manufacturing batches are normal and expected. Measurement tolerance: ±1–3 cm. Do not force clips; reposition cover if resistance is felt. Why Choose Victorious We've been fitting BMW owners with premium exterior styling since 2015. Every M4 style mirror cover is physically inspected for finish quality, clip strength, and fitment accuracy before dispatch. Our 4.9★ rating across 12,300+ verified reviews reflects our commitment to the BMW community. When you order from Victorious, you're backing yourself with a 30-day money-back guarantee, worldwide shipping via DHL / FedEx / UPS / TNT, and direct support from enthusiasts who drive what we sell. Ready to Add M4 Aggression to Your BMW? Upgrade your mirrors today and experience the visual impact of OEM M-spec styling. Our direct-fit covers ship next business day and come with our full satisfaction guarantee. Shop M4 Style Mirrors Use code 22GET20 for 20% off any 2 items in your cart. ✓ 30-day returns – no questions asked ✓ Worldwide shipping – 3–7 days typical ✓ 4.9★ reviews – 12,300+ verified owners ✓ Expert support – +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names, logos, and brands referenced are the property of their respective holders and used for descriptive and compatibility purposes only. These are aftermarket accessories designed to fit OEM specifications and are not original equipment manufactured by BMW.

Victorious · Tesla Model 3 · Interior Lighting Color Reading Lighting Strip for Tesla Model 3 Premium ambient reading light upgrade with carbon fiber trim—sophisticated interior enhancement for discerning EV owners. T3 2016–2019 Carbon Fiber Ambient Lighting Peel & Stick Overview The Tesla Model 3 deserves an interior that matches its sophistication. This Color Reading Lighting Strip combines elegant ambient lighting with authentic carbon fiber trim, transforming your cabin ambiance with minimal effort and maximum visual impact. Crafted from genuine carbon fiber, this upgrade delivers a premium aesthetic that elevates the entire interior environment. The soft, color-adjustable reading light provides functional illumination for nighttime driving while maintaining the sleek, modern character your Model 3 already possesses. Installation is straightforward via precision-cut double-sided tape—no drilling, cutting, or permanent modification required. Proper alignment during install ensures a seamless, factory-finished appearance that looks as though it was engineered in-house from day one. What's Included 💡 Lighting Strip Premium color-adjustable reading light 🔧 Double-Sided Tape Pre-cut for precise, damage-free fitting Product Highlights Genuine carbon fiber construction for authentic premium appearance Color-adjustable ambient light for personalized cabin mood Peel-and-stick installation—no tools or drilling required Direct fit for 2016–2019 Tesla Model 3 interior Enhances nighttime driving visibility and safety Factory-finished appearance when properly aligned Durable, long-lasting materials resist fading and damage Complements OEM interior design language seamlessly Improves cabin atmosphere for passengers and driver Simple, reversible upgrade with no permanent modifications Compatibility Vehicle Model Years Fit Status Tesla Model 3 2016–2019 Direct Fit Tesla Model 3 2020+ Not Compatible Tesla Model Y All years Not Compatible Tesla Model S All years Not Compatible Installation 📋 Installation Guide Difficulty: Beginner · Time: 10–15 minutes Power off your Tesla Model 3 and open the driver's door to access the reading light area above the driver's seat. Gently clean the mounting surface with a soft, lint-free cloth to remove dust and ensure optimal tape adhesion. Carefully peel the backing from the double-sided tape strips and position the carbon fiber lighting strip with precise alignment. Press firmly and evenly across the entire length of the strip, working from the center outward to avoid air bubbles. Allow the adhesive 24 hours to cure fully before using the reading light or adjusting its position. Test the lighting function through your vehicle's infotainment system and adjust color settings as desired. ⚠ Note: Ensure the mounting surface is clean and dry before application. Improper alignment during install may require complete removal and re-installation. Allow full adhesive cure time before operating the light. Ready to Elevate Your Model 3? Transform your cabin with premium ambient lighting that works as hard as it looks. This carbon fiber reading strip delivers genuine upgrade character in minutes, with no permanent modifications or technical expertise required. Shop Now Apply code 22GET20 for 20% off when you purchase any 2 items. 30-Day Money-Back Guarantee 4.9★ 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc. or any of its subsidiaries. Tesla is a registered trademark of Tesla, Inc. All references to Tesla vehicles are made solely for compatibility and identification purposes. Product design, engineering, and support are provided independently by Victorious Automotive.

Tesla · Model 3 · Interior Trim Matte Carbon Indicator & Wiper Stalks for Tesla Model 3 Elevate your cockpit with premium carbon fiber stalks engineered for seamless OEM fit and modern aesthetic appeal. T3 2016–2019 Real Carbon Fiber Matte Finish Direct Fit Overview The Tesla Model 3 (2016–2019) deserves interior details that match its forward-thinking design language. These Matte Carbon Indicator and Wiper Stalks replace the standard plastic trim with authentic carbon fiber, delivering a premium tactile and visual upgrade that transforms your driving environment at every glance. Machined from genuine carbon fiber and finished in a refined matte texture, these stalks strike the balance between aggressive styling and understated elegance. They're engineered to drop in using precision-fit tooling and include professional-grade adhesive—installation takes under 15 minutes with zero modifications to your vehicle. Whether you're commuting in the city or enjoying an open road, these stalks signal that you've invested in the kind of meticulous detailing that separates enthusiasts from the everyday driver. They catch light without glare, age beautifully, and complement both minimal and bespoke interior schemes. What's Included 🎯 Carbon Fiber Stalk Set Indicator + wiper trim pair 🔧 High-Grip Adhesive 3M double-sided tape included 📋 Installation Guide Step-by-step photo instructions 🛡️ 30-Day Assurance Full money-back guarantee Product Highlights Authentic real carbon fiber construction—no plastic imitation Matte finish resists fingerprints and suits any interior palette Factory precision fit for 2016–2019 Model 3 (all variants) 3M adhesive allows non-destructive installation and repositioning Includes complete installation hardware and documentation Complements existing cabin upgrades seamlessly Lightweight yet durable—engineered for daily use Enhanced tactile feedback during indicator and wiper operation Sourced from Tier-1 aerospace-grade carbon suppliers Backed by Victorious Automotive's trusted 30-day guarantee Compatibility Model Year Variant Fit Status 2016–2017 All (Std, Long Range, Perf) Direct Fit 2018–2019 All (Std, Mid, Long Range, Perf) Direct Fit 2020+ Model 3 (Revised Interior) Not Compatible Please verify your vehicle's year and interior layout before purchase. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm GMT). Installation Notes Difficulty: Easy | Time: 10–15 mins Power off the vehicle and let the cabin cool to room temperature. Gently inspect the existing stalk trim to identify the adhesion edges. If replacing existing trim, carefully peel away the old pieces and clean residue with isopropyl alcohol. Allow the surface to dry completely. Remove the backing from the 3M adhesive strips on the new carbon fiber stalks. Align the stalks with precision and press firmly for 30 seconds per stalk to ensure full contact. Wait 24 hours before operating the indicators or wipers to allow adhesive cure. Pro Tip: Warm adhesive surfaces slightly with a heat gun (low setting) before installation to activate the 3M bond. This ensures maximum hold in high-vibration environments. Upgrade Your Model 3 Interior Today Small details matter. These carbon fiber stalks are the signature touch that transforms your cabin from stock to curated. Order now and drive with the confidence that comes from genuine premium materials and Victorious Automotive craftsmanship. Add to Cart Use code 22GET20 for 20% off when you add any 2 items 4.9/5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL/FedEx shipping ✓ Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Tesla, Inc. or any of its subsidiaries. Tesla is a registered trademark of Tesla, Inc. All product names, logos, and brands are the property of their respective owners.

Tesla · Model 3 · Interior Styling Glossy Carbon Wiper Stalk Covers – Tesla Model 3 Premium carbon fiber indicator and wiper stalk covers that elevate your Model 3's interior with understated luxury and modern aesthetics. T3 2016–2019 Genuine Carbon Fiber Glossy Finish Easy Install Overview Your Tesla Model 3 deserves interior details that match its precision engineering. These glossy carbon wiper and indicator stalk covers transform a utilitarian control into a design statement—the kind of upgrade that catches the eye every time you reach for the stalk. Crafted from genuine carbon fiber with a mirror-glossy finish, these covers add depth, contrast, and a refined technical edge to your cabin. They're the perfect response to Tesla owners who refuse compromise: maximum visual impact with zero complexity. Installation is tool-free and takes minutes. The high-quality double-sided tape means they stay put through years of daily use, and the robust carbon construction ensures they'll look as sharp five years from now as they do on day one. What's Included 🎁 Wiper Stalk Covers 1 set of genuine carbon fiber covers 🔧 Installation Tape Pre-cut double-sided adhesive strips Product Highlights Genuine carbon fiber construction with glossy UV-stable finish Precision-engineered to fit Model 3 stalks without modification High-quality double-sided tape for secure, long-term adhesion Tool-free installation in under 5 minutes Adds premium visual contrast to the steering column Durable and scratch-resistant finish No drilling, no permanent modifications Lightweight design preserves stalk feel and response Water and UV-resistant coating Perfect complement to other Model 3 carbon upgrades Compatibility Vehicle Years Compatibility Tesla Model 3 2016–2019 Direct Fit Tesla Model 3 2020+ Not Compatible Note: Always verify your vehicle year before checkout. Stalk design changed after 2019. Installation Difficulty: Beginner | Time: 5 minutes | Tools: None Clean the wiper and indicator stalks with a dry microfiber cloth. Remove any dust or residue. Peel the backing from the double-sided tape on the carbon cover. Align the cover carefully with the stalk and press firmly for 10 seconds. Repeat for the second stalk if included in your set. Allow adhesive to cure for 24 hours before heavy use. Tip: If you make a mistake during positioning, gently peel back the cover and reposition. Adhesive can be reused once. Why Victorious We source only genuine materials and partner with suppliers who understand precision automotive fit. Every product is tested by real enthusiasts before it ships. Your satisfaction isn't optional—it's guaranteed. Ready to Upgrade Transform your Model 3's interior with these genuine carbon fiber covers. Premium materials. Easy install. Lasting design. Add to Cart Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Tesla, Inc. or its subsidiaries. All references to vehicle models are for compatibility purposes only.

Victorious · Tesla Model 3 · Interior Upgrades Red Carbon Indicator & Wiper Stalks for Tesla Model 3 Transform your Model 3's interior with premium red carbon fiber stalks that combine visual impact with enhanced durability. T3 2016–2019 Real Carbon Fiber Easy Install Overview Your Tesla Model 3 interior deserves components that match its precision engineering. These red carbon indicator and wiper stalks elevate your cockpit with a bold visual statement while maintaining OEM-quality fitment and durability. Machined from genuine carbon fiber rather than inferior wrap alternatives, these stalks deliver authentic texture and depth. The striking red finish creates contrast against the Model 3's neutral dashboard, catching light as you drive. Unlike painted finishes, real carbon fiber won't chip or fade—it improves with age and daily handling. Installation takes minutes using factory-grade double-sided adhesive. No drilling, no permanent modification. Remove them anytime without residue or damage. What's Included 🎯 Indicator Stalk Left side, directional control 💧 Wiper Stalk Right side, wiper operation 📋 Installation Guide Step-by-step photo instructions 🧹 Prep Cloth Isopropyl-treated for surface cleaning Product Highlights Genuine carbon fiber weave, not vinyl wrap or composite Seamless fit for Tesla Model 3 2016–2019 models Premium double-sided adhesive rated for high-contact areas Red finish complements OEM steering wheel and trim accents Increased tactile grip for daily directional and wiper control UV-stable finish resists fade and oxidation Lightweight—no added steering column strain Reversible installation with no permanent modifications Pairs seamlessly with carbon fiber steering wheels and trim kits 3-year warranty against manufacturing defects Compatibility Model & Year Status Tesla Model 3 (2016–2019) Direct Fit Tesla Model 3 (2020+) Not Compatible Tesla Model 3 Performance Direct Fit Tesla Model 3 Standard Range Direct Fit Installation Difficulty: Beginner | Time: 5–10 minutes Clean the stalk surfaces. Use the supplied prep cloth to wipe down both indicator and wiper stalks on your Model 3. Remove any dust, oils, or residue. Allow 1 minute to dry fully. Peel adhesive backing. Carefully remove the protective liner from the double-sided tape on the carbon fiber covers. Align and press. Position each stalk cover over its corresponding original stalk. Press firmly for 10 seconds to ensure full contact and adhesion. Allow curing time. Wait 24 hours before using the stalks to allow adhesive to reach full strength. ⚠️ Important: Ensure the dashboard surface temperature is between 60–80°F before installation. Cold conditions may reduce adhesive effectiveness. Do not force stalks into place; alignment should feel effortless. Complete Your Model 3's Carbon Interior Red carbon fiber stalks are just the beginning. Explore matching steering wheel wraps, door handle covers, and trim kits to create a fully integrated cockpit aesthetic. Shop All Model 3 Upgrades Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Tesla, Inc., or any official Tesla subsidiary. All product names and vehicle designations are used for identification and compatibility purposes only.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Silver Interior Frame Trim for Range Rover Evoque L538 2012–2018 A precision-cut, glue-fit ABS silver trim overlay that refreshes the interior frame detailing of your Evoque with a clean, factory-finish aesthetic — no drilling, no damage. Evoque L538 2012–2018 ABS Material Silver Finish Glue-Fit Install Interior Trim OEM Sizing 100% New ONESTICKERS Overview The Range Rover Evoque L538, produced between 2012 and 2018, established itself as one of Land Rover's most design-forward vehicles — a compact SUV that blended urban style with genuine off-road capability. Inside, the cabin reflects that ambition, but over time interior trim pieces can fade, scuff, or simply begin to look dated against the overall character of the car. This Silver Interior Frame Trim is a direct-fit ABS overlay designed to sit seamlessly over the existing interior frame surfaces of the Evoque L538. Finished in a clean silver tone with a 3D profile, it restores a sharp, premium look to one of the most visually prominent areas of the cabin. The adhesive-backed fitment means installation is clean and reversible, with no permanent modification required. Manufactured to OEM dimensions under the ONESTICKERS brand, this trim piece is precision-engineered to match the exact contours of the Evoque's interior frame — so it sits flush, looks factory, and protects the underlying surface from everyday contact wear at the same time. What's Included 🪟 Silver Frame Trim Overlay ABS silver trim piece, OEM-matched sizing 🔧 Pre-Applied Adhesive Glue backing ready for fitment 🧹 Clean-Fit Design No drilling or cutting required 📦 Direct Dispatch Ships worldwide via DHL, FedEx, UPS, TNT Product Highlights Precision-cut to OEM Evoque L538 frame dimensions High-quality ABS construction — durable and lightweight Silver finish adds a premium, contemporary interior tone 3D profile sits flush with existing trim surfaces Pre-applied adhesive backing for clean installation Protects original trim from scuffs and contact wear No drilling, cutting or permanent modification needed Fully reversible — can be removed without damage 100% brand new — not a refurbished or remanufactured part Compatible with all Evoque L538 variants, 2012–2018 Compatibility Vehicle Code Year Range Fit Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque (Facelift) L538 2016–2018 Direct Fit Range Rover Evoque Convertible L538 2016–2018 Direct Fit Range Rover Evoque L551 2019–Present Not Compatible Range Rover Velar L560 2018–Present Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean the target interior frame surface using an isopropyl alcohol wipe. Remove all dust, grease, and residue, then allow to dry completely before proceeding. Dry-fit the trim overlay against the frame surface to confirm alignment and verify the OEM size is correct for your specific Evoque variant and year. Peel back a small section of the adhesive backing and carefully position the trim piece from one end, pressing firmly as you go to avoid air bubbles or misalignment. Once fully seated, apply firm, even pressure across the entire trim surface for 30–60 seconds to ensure the adhesive bonds correctly to the substrate. Allow the adhesive to cure for at least 24 hours before exposing the trim to moisture, cleaning products or direct sunlight for extended periods. ⚠ Note: Ensure the cabin temperature is above 15°C (59°F) at time of installation. Cold surfaces significantly reduce adhesive bond strength. Do not attempt to reposition the trim repeatedly once the adhesive has made contact. Finish Your Evoque Interior the Right Way At Victorious Automotive, we stock a full range of interior and exterior accessories for the Range Rover Evoque L538. Browse the complete collection or get in touch with our team if you need guidance on fitment or compatibility. Shop Range Rover Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 & Range Rover Sport · Interior Upgrades Engine Start/Stop Button Cover Sticker – Alloy Finish for Land Rover Discovery 4 & Range Rover Sport (2010–2016) A precision-cut aluminium alloy overlay that refreshes the look of your start/stop button in minutes — no tools, no fuss, no compromise. Discovery 4 L319 Range Rover Sport L320 2010–2016 Aluminium Alloy Silver Alloy Finish Peel & Stick ISO9001 Certified Model HT-420 Overview The Land Rover Discovery 4 and Range Rover Sport L320 earned their reputations through capability, refinement, and an interior that set the benchmark for premium SUVs of their era. Years of daily use, however, can leave the start/stop button looking worn, scratched, or simply dated — a small detail that enthusiastic owners notice every single time they get behind the wheel. This engine start/stop button cover sticker is designed specifically for the Discovery 4 (2010–2016) and Range Rover Sport (2010–2013) button aperture. Machined from high-grade aluminium alloy and finished in a brushed silver that mirrors factory trim accents, it sits flush over the existing button and restores a factory-fresh, premium appearance without any permanent modification to the vehicle. The installation relies on automotive-grade adhesive tape — the same principle used by manufacturers for interior trim elements. It bonds firmly, resists heat and vibration, and leaves no residue if removed. For owners who take pride in maintaining their vehicle's interior to the highest standard, this is exactly the kind of considered upgrade that makes the difference. What's Included 🔘 Button Cover Sticker × 1 Aluminium alloy, brushed silver finish, pre-fitted adhesive backing 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Precision-cut aluminium alloy construction for a solid, premium feel Brushed silver finish complements existing Discovery 4 and Sport interior trim Automotive-grade adhesive tape — bonds firmly without permanent modification Designed to sit perfectly flush over the original button housing Protects the underlying button from further wear, scratches, and fading No drilling, no wiring, no specialist tools required Heat and vibration resistant — engineered for in-cabin conditions Lightweight at just 1g — no interference with button operation ISO9001 certified manufacturing for consistent quality control Residue-free removal should you wish to revert to standard Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 4 L319 2010–2016 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Not sure about your vehicle? Call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes ⏱ Difficulty: Beginner  |  Estimated Time: 5–10 minutes  |  Tools Required: None Ensure your vehicle's engine is off and the interior is at room temperature before beginning. Thoroughly clean the existing start/stop button surface using a dry microfibre cloth to remove any dust, oils, or residue. If available, use a small amount of isopropyl alcohol (IPA) on the cloth and allow the surface to dry completely before proceeding. Carefully peel the protective backing from the adhesive side of the cover sticker. Align the cover sticker precisely over the existing button, ensuring even placement before making contact with the surface. Apply firm, even pressure across the cover for 30–60 seconds to activate the adhesive bond fully. Allow a minimum of 30 minutes before using the button to ensure a secure hold. ⚠ Important: Do not install on a damp, greasy, or freshly cleaned surface. Any contamination between the adhesive and the button will significantly reduce bond strength. Ensure the surface is completely clean and dry prior to application. Upgrade Your Interior Today It's the details that define a well-kept Land Rover. Shop the full range of Discovery 4 and Range Rover Sport interior accessories at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Shop Range Rover Sport L320 Accessories Buying 2 or more items? Use code below for 20% off: 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Red Carbon Fiber Dashboard Trim for Range Rover Sport L494 (2014–2019) — Left Hand Drive A bold, driver-focused interior upgrade crafted from real carbon fiber — adding striking visual depth to the Range Rover Sport L494 dashboard without a single tool required. Range Rover Sport L494 2014–2019 Left Hand Drive Real Carbon Fiber Red Finish Dashboard Trim Peel & Stick Interior Upgrade Overview The Range Rover Sport L494 was engineered to deliver a dynamic driving experience — a vehicle that sits at the intersection of genuine off-road capability and premium performance. Its interior, while refined from the factory, is a canvas that rewards thoughtful personalisation. This red carbon fiber dashboard trim is designed for drivers who want their Sport to reflect the same intensity behind the wheel as it delivers on the road. Constructed from 100% real carbon fiber, this trim piece brings genuine material quality to your dashboard. The woven carbon weave is finished in a deep, lacquered red that catches light with a richness you simply cannot replicate with vinyl wraps or ABS plastic alternatives. The result is an interior accent that feels purposeful and considered — not an afterthought. Engineered specifically for left-hand drive variants of the L494 Sport between 2014 and 2019, every contour and mounting point is matched precisely to the OEM dashboard geometry. Installation requires no drilling, cutting, or professional modification — the trim uses a high-strength automotive-grade 3M adhesive backing that bonds cleanly and removes without residue if needed. It's the kind of upgrade that takes minutes to fit but looks like it was always there. What's Included 🧩 Carbon Fiber Dashboard Trim 1× red carbon fiber trim panel, pre-cut for L494 LHD fitment 📋 Installation Guide Step-by-step printed instructions for a clean, confident fit 🧼 Surface Prep Wipe Alcohol cleaning wipe for optimal adhesion before application 📦 Protective Packaging Rigid foam-lined box to ensure zero transit damage Product Highlights 100% real carbon fiber construction — not plastic, not vinyl, not ABS Bold red lacquered finish with deep woven texture visible under all lighting conditions Precision-cut for the Range Rover Sport L494 left-hand drive dashboard geometry Automotive-grade 3M adhesive backing — no tools, no drilling, no modifications required Lightweight material adds no meaningful weight to the vehicle interior Resistant to UV fading, heat distortion, and everyday interior wear OEM-level surface finish with smooth edges and consistent lacquer depth Removable without surface damage — ideal for leased vehicles Compatible with factory dashboard surfaces including matte, gloss, and wood veneer trims Pairs cleanly with other Victorious carbon fiber interior accessories for a unified look Compatibility Vehicle Code Years Drive Fitment Range Rover Sport L494 2014–2019 Left Hand Drive Direct Fit Range Rover Sport L494 2014–2019 Right Hand Drive Not Compatible Range Rover Sport L494 2013 (Pre-facelift) LHD / RHD Not Compatible Range Rover Sport L461 2022–2026 LHD / RHD Not Compatible Range Rover Vogue L405 2013–2020 LHD / RHD Not Compatible Range Rover Velar L560 2018–2022 LHD / RHD Not Compatible Defender L663 2020–2026 LHD / RHD Not Compatible Installation Notes ⏱ Estimated Time: 15–25 minutes  |  🔧 Difficulty: Beginner-Friendly Confirm your vehicle is a left-hand drive Range Rover Sport L494 manufactured between 2014 and 2019 before proceeding. Park in a clean, dry environment with the cabin at room temperature. Avoid installation in cold or damp conditions, as this can reduce adhesive performance. Use the included alcohol wipe to thoroughly clean the target dashboard surface. Remove any dust, grease, or silicone residue. Allow to dry completely — approximately 2 minutes. Dry-fit the trim panel against the dashboard to confirm alignment and panel coverage before removing the adhesive backing. Peel back approximately one-third of the adhesive liner. Align one edge carefully with the panel boundary, then slowly press the trim into place while peeling the remaining liner. Apply firm, even pressure across the full surface using your thumb or a soft cloth for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 2 hours before exposing the trim to heat or direct sunlight to allow the adhesive to fully cure. ⚠ Important: This trim is designed exclusively for left-hand drive L494 models. Attempting to fit this piece to a right-hand drive vehicle will result in incorrect alignment. If you are unsure of your vehicle's drive configuration, check the VIN plate or your vehicle registration document before ordering. Built for Range Rover Sport Owners Who Demand More Every piece in the Victorious collection is selected for fit, material quality, and long-term durability. If you're upgrading the Sport L494, explore our full range of L494 interior accessories — or speak with our team directly on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop Range Rover Sport L494 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Velar & Evoque · Interior Trim Aluminum Alloy Central Air Conditioning & Volume Knob Trim — Range Rover Velar 2017–2019 & Evoque 2019–2020 Precision-machined aluminum alloy knob ring trims that instantly elevate the tactile quality and visual refinement of your Velar or Evoque's central console. Range Rover Velar 2017–2019 Evoque 2019–2020 Aluminum Alloy 3-Piece Set Peel & Stick Install ISO9001 Certified 4 Colour Options Interior Trim Overview The Range Rover Velar and second-generation Evoque represent two of the most design-forward vehicles in the Land Rover lineup — clean surfaces, considered proportions, and an interior language that rewards those who notice the details. But the factory-finish plastic surrounding the climate and volume knobs has always been the one area where the interior falls just short of its own ambition. These aluminum alloy knob ring trims are engineered specifically for the Velar (2017–2019) and Evoque (2019–2020) centre console layout. Each ring is precision-formed from aerospace-grade aluminum alloy and finished to a standard that complements the vehicles' existing metalwork. Available in four colourways — silver, blue, rose gold, and red — there is an option to match whether your interior leans understated or expressive. ISO9001-certified manufacturing ensures dimensional accuracy for a flush, rattle-free fit. The result is a cabin upgrade that feels factory-intentional rather than aftermarket-applied — the kind of detail that Velar and Evoque owners will notice every single time they reach for the climate controls. What's Included ⭕ Knob Ring Trims × 3 Full set covering AC and volume knobs 🔵 Choice of 4 Finishes Silver, Blue, Rose Gold, or Red 🔧 Pre-Applied Adhesive 3M-style peel-and-stick backing included 📋 Fitment Guide Model-specific placement reference Product Highlights Precision-machined from durable aluminum alloy — not plastic ISO9001-certified production for consistent dimensional accuracy Direct-fit design — no cutting, drilling, or modification required Four finish options: Silver, Blue, Rose Gold, and Red Environmentally responsible materials throughout manufacture Rattle-free fit with flush surface alignment to factory trim Peel-and-stick installation — reversible and residue-minimal Elevates tactile feel every time you adjust climate or volume Complements existing brushed metal interior elements 3-piece set covers all central console knob positions in one kit Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2019 All Variants Direct Fit Range Rover Evoque (L551) 2019–2020 All Variants Direct Fit Range Rover Evoque (L538) 2011–2018 All Variants Not Compatible Range Rover Velar 2020+ All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes ⏱ Estimated Time: 10–15 Minutes  |  Difficulty: Beginner Ensure the vehicle interior is at room temperature — cold surfaces can reduce adhesive performance. Avoid installation below 10°C. Clean each knob base thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue from around the knob collar and allow to dry completely. Dry-fit each ring trim to confirm orientation and alignment before committing. The trims are shaped to sit flush — test the fit without removing the adhesive backing first. Peel the protective backing from one trim at a time. Position carefully over the knob base and press firmly from the centre outward for 30–60 seconds. Repeat for all three trims. Allow the adhesive to cure for at least one hour before subjecting the trims to heat from the climate system. ⚠ Note: Do not apply excessive rotational force directly to the trim rings — they are decorative overlays, not structural components. If a trim lifts at the edges after installation, reapply with a trim-safe adhesive promoter for a more permanent bond. Complete Your Velar or Evoque Interior These knob trims pair beautifully with our wider range of Velar and Evoque interior accessories. Browse the full collection or get in touch with our team for fitment advice — we know these vehicles inside out. Shop Range Rover Velar Accessories Shop Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 5 · Boot Organisation Rear Boot Storage Box – Land Rover Discovery 5 LR5 L462 (2017–2018) A precision-fit plastic storage solution for the Discovery 5 boot floor — designed to organise car care sprays, bottles and accessories neatly out of sight. L462 2017–2018 Discovery 5 LR5 Black Plastic Boot Organisation Direct Fit ISO 9001 Certified Interior Accessory Overview The Land Rover Discovery 5 L462 is one of the most capable and versatile family SUVs ever produced — equally at home on a Welsh mountain track as it is on the school run. With a generous boot and third-row seating, the Discovery 5 is a vehicle that gets used hard. And with use comes clutter: screen wash, tyre inflators, detailing sprays and emergency supplies inevitably accumulate in the load bay with no dedicated home. This rear boot storage box is purpose-designed to address exactly that. Engineered to fit the specific contours of the Discovery 5 L462 boot floor, it provides a structured compartment to neatly house bottles, aerosols and car care essentials — preventing them from rolling around loose during cornering or braking. Constructed from durable, environmentally conscious plastic with a clean black finish, it integrates naturally with the Discovery 5's interior aesthetic. Unlike generic boot tidies or fabric organisers that shift and collapse under load, this rigid plastic unit stays firmly in position, maintaining its form even when fully loaded. It's a small addition that makes a meaningful difference to everyday ownership — keeping the boot usable, presentable and well-organised from day one. What's Included 📦 Boot Storage Box 1 x rigid plastic unit, black finish 🔩 Fitting Hardware All necessary clips or fixings included 📋 Installation Guide Step-by-step fitment instructions Product Highlights Precision-engineered for the Discovery 5 L462 boot floor profile Rigid plastic construction — holds shape under load Clean black finish blends with OEM interior trim Ideal for organising sprays, bottles and car care products Prevents items rolling loose during transit Environmentally conscious, durable material composition Lightweight at just 0.5 kg — no meaningful load penalty ISO 9001 certified manufacturing process No permanent modifications required for fitment Reversible installation — removable when not needed Compatibility Model Code Year Range Fit Land Rover Discovery 5 L462 / LR5 2017–2018 Direct Fit Land Rover Discovery 5 L462 / LR5 2019–2024 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2014–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Open the rear boot of your Discovery 5 L462 and clear the boot floor area of any existing items. Identify the designated fitment zone along the boot floor — typically along the side or rear wall depending on your variant. Align the storage box unit with the corresponding mounting points or boot floor contours. Press or clip the unit firmly into position using the included hardware until you hear or feel it seat securely. Test by gently pulling the unit to confirm it is locked in place before loading with items. ⚠ Please Note: This unit is confirmed as a direct fit for the Discovery 5 L462 model years 2017 and 2018 only. If your vehicle falls outside this range, please contact our team before ordering to confirm suitability. Boot floor configurations can vary between model year facelifts. More for Your Discovery 5 Browse our full range of Land Rover Discovery 5 accessories — from interior organisation to exterior protection, all curated specifically for the L462. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are referenced solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Sport L494 · Gear Mechanism Range Rover Sport Gear Knob Lever Button & Handball Plating Sliding Handle — 2014–2017 (L494) A precision-matched replacement for the gear selector lever button and handball plating handle on the 2014–2017 Range Rover Sport L494 — restoring smooth, satisfying gear engagement with a direct OEM-spec fit. Range Rover Sport L494 2014–2017 OEM Ref: LR077066 Material Ref: LR108936 Direct Fit Handball Plating DIY Install Gear Selector Repair Overview The Range Rover Sport L494 is a vehicle that commands presence — both on and off road. Every detail of the interior is engineered to reinforce that sense of authority, and the gear selector is no exception. It sits at the very heart of the driver experience, handled dozens of times on every journey. When the plastic lever button or handball plating handle begins to fail — cracking, sticking, or losing its tactile response — the effect on the driving experience is immediate and disproportionate. This replacement gear knob lever button and handball plating sliding handle is engineered specifically for the 2014–2017 Range Rover Sport L494. Carrying OEM reference LR077066 and material code LR108936, it slots directly into the existing gear mechanism without modification, restoring the crisp, positive action that the original was designed to deliver. The handball plating finish maintains the premium aesthetic of the Sport's interior, ensuring the repair is invisible once complete. Whether the original component has cracked under general wear, warped from temperature cycling, or simply lost its structural integrity, this part addresses the root cause — not just the symptom. No bodge, no workaround. Just a proper, lasting fix that respects the engineering of your vehicle. What's Included 🎛️ Gear Knob Lever Button OEM ref LR077066 — direct replacement for selector mechanism 🖐️ Handball Plating Sliding Handle Material ref LR108936 — premium plated sliding handle insert Product Highlights Precision-fit for Range Rover Sport L494 (2014–2017) OEM reference LR077066 — exact specification match Material code LR108936 — sourced to factory standard Handball plating finish preserves interior aesthetics Direct replacement — no modification required Addresses cracked or broken plastic selector components Restores smooth, positive gear lever action Durable construction built to withstand daily use DIY-friendly installation — no specialist tools needed Supplied as a complete two-piece repair kit Compatibility Vehicle Code Years Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 Verify Required Range Rover Sport L494 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Verify Required Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: Small flathead screwdriver Ensure the vehicle is stationary, engine off, and the gear selector is in Park (P). Locate the plastic cover bearing the gear position indicators (P, R, N, D) around the base of the gear knob. Carefully pry away the plastic gear indicator cover using a small flathead screwdriver — work slowly around the perimeter to avoid cracking. With the cover removed, the retaining screw for the gear knob assembly will be visible. Unscrew and retain. Lift the gear knob assembly clear of the selector shaft and set aside safely. Remove the worn or damaged lever button and handball plating sliding handle from the assembly. Install the new lever button and handball plating handle, ensuring each component seats firmly and clicks positively into position. Reattach the gear knob assembly to the selector shaft and secure with the retaining screw. Replace the gear indicator plastic cover, pressing evenly until it clips flush. Test gear selector action across all positions before driving. ⚠ Note: Take care when removing the gear indicator plastic cover — it is retained by clips and can crack if excessive force is applied. Work methodically around the perimeter rather than levering from a single point. Built for Range Rover Sport Owners Who Won't Compromise At Victorious Automotive, we stock parts that meet the standard your Range Rover Sport was built to. Browse our full Range Rover Sport L494 collection or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you need fitment advice. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔁 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or authorised by Jaguar Land Rover Limited (JLR) or any of its subsidiaries. Land Rover, Range Rover, Defender, and all associated model names are registered trademarks of Jaguar Land Rover Limited. OEM part numbers are referenced for compatibility purposes only.

Victorious Automotive · Mercedes G-Class · Infotainment Upgrade Wireless Apple CarPlay Upgrade Kit for Mercedes C/E/B/G Class NTG4.5/4.7 Seamless wireless Apple CarPlay and Android Auto integration—no factory screen replacement needed. NTG4.5 / NTG4.7 2011–2013 Wireless CarPlay Android Auto OEM Integration Overview This retrofit CarPlay system transforms your Mercedes C-Class, E-Class, B-Class, or G-Class (2011–2013 with NTG4.5/4.7 systems) into a modern connected cabin—without replacing your factory screen. Using the existing 7-inch or 8.4-inch display, you gain full wireless connectivity via Bluetooth and Wi-Fi, plus optional USB wired mode for charging and stability. Whether you're navigating with Google Maps, Waze, or Apple Maps, playing Spotify, or taking calls hands-free via "Hey Siri," everything you need is at your fingertips. The system retains full OEM button control, steering wheel integration, and the ability to switch back to your original interface in one tap. Your car stays authentic; your tech moves forward. Perfect for owners who want modern smartphone integration without the cost and hassle of factory head unit replacement. Compatible with AUX-activated or AMI interface systems, this kit slots seamlessly into your existing architecture. What's Included 📦 Wireless CarPlay Module Connects to your vehicle's AUX/AMI interface 🔌 USB Connection Cable Optional wired mode + device charging 📖 Installation Manual Step-by-step English instructions included ⚡ Multi-Protocol Support Apple CarPlay, Android Auto, AirPlay, Mirroring-Link Product Highlights Wireless CarPlay via Bluetooth and Wi-Fi connectivity Optional USB wired connection for stability and charging Full GPS app support: Google Maps, Waze, Apple Maps Music streaming: Apple Music, Spotify, Amazon Music, Tidal "Hey Siri" hands-free voice control integration Android Auto and AirPlay Mirroring compatibility Front, rear, and 360-degree camera support with guidance lines Advanced equalizer for personalised audio tuning Retains all OEM steering wheel and button controls One-tap switch back to factory interface via Home/Back button Compatibility & Screen Support Vehicle Model Year Range Screen Size Compatibility Mercedes C-Class (W204) 2011–2013 7" / 8.4" Direct Fit Mercedes E-Class (W212) 2011–2013 7" / 8.4" Direct Fit Mercedes B-Class (W246) 2011–2013 7" / 8.4" Direct Fit Mercedes G-Class (W463) 2011–2013 7" / 8.4" Direct Fit Pre-2011 or Post-2013 Models Before 2011 / After 2013 Any Not Compatible Vehicles without AUX/AMI Interface Any Any Not Compatible Installation & Setup Difficulty Level: Intermediate | Time: 45–60 minutes Verify AUX Activation: Check your vehicle settings to ensure AUX input is enabled in the infotainment system. If not, activate via the main menu or consult your manual. Locate AMI Interface: Open your centre console armrest box and locate the AMI (AUX Music Interface) connector or AUX input socket. Connect the Module: Plug the wireless CarPlay module into the AMI interface or AUX input. Secure with included fasteners if necessary. Power Connection: Route the power cable to your car's 12V accessory outlet or existing AUX power feed. Use the provided USB adapter if needed. Pair via Bluetooth: On your iPhone or Android device, search for the module in Bluetooth settings and pair. Follow the on-screen prompts to enable CarPlay/Auto. Test Navigation & Audio: Launch Google Maps or Apple Maps, play a music app, and verify all controls respond via your steering wheel and dashboard buttons. Adjust Equalizer (Optional): Fine-tune audio output using the built-in EQ settings via the module's menu. ⚠ Important: AUX must be activated in your vehicle before installation. Some models may require dealer activation or a software update. If you're unsure, consult your Mercedes manual or contact us at +44 203 943 9919 for pre-installation verification. Why Victorious Automotive? We specialise in premium, thoughtfully engineered upgrades for discerning vehicle owners. This CarPlay kit respects your Mercedes' original design while bringing it into the modern connected age—no expensive OEM replacements, no compromise on functionality. We've tested this module across NTG4.5 and NTG4.7 systems to ensure flawless integration and reliability. Every kit ships worldwide via DHL, FedEx, UPS, or TNT with full tracking. Your 30-day money-back guarantee means zero risk. And with our 4.9/5 star rating from 12,300+ verified buyers, you're buying from a team that genuinely cares about your drive. Ready to Upgrade? Transform your 2011–2013 Mercedes into a connected driving hub. Wireless CarPlay, Android Auto, hands-free Siri—all without touching your original screen. Order today and drive smarter tomorrow. Add to Cart Use code: 22GET20 for 20% off any 2 items 🌍 Worldwide Shipping ⏳ 30-Day Money Back 📞 Expert Support Mon–Fri 9am–7pm ⭐ 4.9 Stars | 12,300+ Reviews Disclaimer: Victorious Automotive is an independent accessory supplier and is not affiliated with, endorsed by, or authorised by Mercedes-Benz, Daimler AG, or any affiliated company. Product names and brands mentioned are the property of their respective owners. This product is designed for use on compatible vehicles as specified and is not a factory replacement or OEM component. Installation may require professional support. Always verify vehicle compatibility before purchase.

Premium Infotainment · Porsche PCM 3.1 · 2010–2016 Wireless Apple CarPlay for Porsche PCM 3.1 Transform your Porsche's factory infotainment with seamless wireless CarPlay and Android Auto integration. PCM 3.1 Compatible 2010–2016 Wireless + Wired Steering Wheel Control Camera Support Hands-Free Siri Overview Built for Porsche owners who demand connectivity without compromise. This wireless CarPlay system integrates directly into your PCM 3.1 head unit, replacing the factory interface while preserving all original controls and functionality. Simply connect your iPhone or Android phone via Bluetooth or USB, and instantly access Apple Maps, Spotify, Waze, Google Maps, and phone controls through the factory touchscreen and steering wheel buttons. No adaptation period. No compromises. This is the upgrade Porsche Cayenne, Macan, 911, Panamera, Boxster, and Cayman owners have been waiting for—modern smartphone integration that respects your car's design and your driving experience. What's Included 📱 Wireless CarPlay Module Plug-and-play integration 🎛️ Full Button Control OEM steering wheel integration 🎤 Dedicated Microphone For Siri and hands-free calls 📸 Camera Support Ready Rear/front/360 compatible 🔌 USB + Bluetooth + AUX Triple connection option 📖 Installation Manual Step-by-step guide included Key Features Wireless Apple CarPlay — Bluetooth pairing; no cable required Wired CarPlay Mode — USB connection for iOS devices Android Auto & Mirroring — Full Android platform support GPS Navigation — Google Maps, Waze, Apple Maps with live traffic Streaming Audio — Apple Music, Spotify, Amazon through factory speakers Siri Voice Control — Hands-free operation; "Hey Siri..." activation OEM Controls Intact — Steering wheel buttons and control knob fully functional Professional EQ — Adjustable equalizer (Pop, Rock, Soft, Standard presets) USB Media Playback — Direct music and video from external drives Factory Integration — Retains original PCM interface; press Home to return anytime Compatibility Porsche Model Year Range Status Cayenne 2010–2016 Direct Fit Macan 2010–2016 Direct Fit 911 / 991 2010–2016 Direct Fit Panamera 2010–2016 Direct Fit Boxster / Cayman / 718 2010–2016 Direct Fit Important: Before ordering, confirm your car has a "NAVI" button on the control panel. If your car has "CD-AUX" button instead, this system is not compatible. If you have Sirius Satellite Radio installed, contact us—we'll provide additional hardware. Installation Difficulty: Intermediate | Time: 45–60 minutes Power down your vehicle and disconnect the negative battery terminal (safety first). Remove the PCM 3.1 head unit from the dashboard using the provided removal keys or plastic pry tools. Disconnect the factory harness and locate the USB port connections behind the unit. Connect the wireless CarPlay module to the USB port and secure harness connections to the factory connectors. Reinstall the PCM unit into the dashboard and reconnect the battery terminal. Power on the system and perform the initial Bluetooth pairing with your smartphone. Test all functions: CarPlay, steering wheel controls, microphone, and factory buttons. Fine-tune EQ settings to your preference using the onscreen menu. Note: This system includes a dedicated microphone to maintain safety features. The original factory microphone cannot be reused due to integrated SOS emergency functionality. Full installation instructions are provided in the box. Ready to Upgrade Your Porsche? Say goodbye to dated infotainment. This wireless CarPlay system brings your PCM 3.1 into the modern era while preserving the authentic Porsche driving experience. Seamless integration. Full smartphone control. Your way. Add to Cart Use code 22GET20 for 20% off when ordering 2+ items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping — DHL, FedEx, UPS, TNT ✓ Expert support — +44 203 943 9919 Have questions? Call our team Mon–Fri, 9am–7pm GMT at +44 203 943 9919, or email support@victorious.shop. We're here to help you get the most out of your Porsche. Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Porsche AG, Porsche Cars North America, Inc., Jaguar Land Rover Limited, or their subsidiaries. All product names, logos, and brands are the property of their respective owners. Product fitment and compatibility are subject to individual vehicle specification and condition. We recommend professional installation. Victorious Automotive assumes no liability for installation errors or vehicle damage resulting from improper use or installation. Please verify vehicle specifications before purchase.

Victorious · Range Rover Evoque · Infotainment Wireless Apple CarPlay & Android Auto for Range Rover Evoque 2013–2017 Upgrade your Evoque's factory infotainment with seamless wireless smartphone integration, navigation, and hands-free control. L538 · Evoque 2013–2017 Apple CarPlay Android Auto Wireless + USB GPS Navigation Overview The Range Rover Evoque L538 deserves infotainment that matches its refined design and capable nature. This factory-integrated wireless CarPlay and Android Auto system replaces the limitations of your standard entertainment unit with a modern, smartphone-centric interface—all while retaining your original screen and steering wheel controls. Connection is effortless: pair via Bluetooth and Wi-Fi for true wireless functionality, or use USB for wired connectivity and simultaneous charging. Your iPhone's Siri voice control activates with "Hey Siri," allowing complete hands-free operation of calls, messages, navigation, and music. Android users enjoy the same seamless integration with Google Assistant. The system mirrors your phone's navigation apps—Apple Maps, Google Maps, Waze—with live traffic data. Stream music from Spotify, Apple Music, Amazon Music, and others through your factory speakers. Optional aftermarket camera integration (360° views with dynamic guidelines) transforms parking and reversing. A powerful, adjustable EQ lets you tailor audio to your preference. Home/Back button instantly returns to the original Range Rover interface if needed. What's Included 📱 Wireless CarPlay Module Bluetooth & Wi-Fi enabled 🔌 USB Connection Cable Wired mode + charging support 📍 GPS Navigation Ready Maps, Waze, live traffic 🎚 Equaliser Control Pop, Rock, Soft, Standard presets 📖 Installation Manual Step-by-step printed guide 🎥 Camera-Ready Interface Front, rear, 360° compatible Product Highlights Wireless pairing via Bluetooth & Wi-Fi; USB fallback mode included Apple CarPlay & Android Auto fully integrated into factory screen Hands-free voice control with Siri & Google Assistant Live GPS navigation: Apple Maps, Google Maps, Waze all supported Stream Spotify, Apple Music, Amazon Music through factory speakers Optional aftermarket camera integration (360° & dynamic lines) Powerful adjustable EQ with multiple audio presets Full steering wheel & control knob compatibility—original buttons work Phone charging via USB port; USB media playback also available One-button return to factory interface (Home/Back button) Compatibility Model Year Range Status Range Rover Evoque L538 2013–2017 Direct Fit Range Rover Evoque L551 (2018+) 2018–Present Not Compatible Other Range Rover models Various Not Compatible Pre-Purchase Check: Verify that your Evoque's AUX input is activated or that the armrest box has an AMI interface. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if unsure. Installation Difficulty Level: Intermediate | Time: 1–2 hours Disconnect the negative battery terminal for safety. Remove the dashboard trim panels around the factory infotainment unit using trim removal tools (included with many aftermarket kits, or available separately). Carefully disconnect the factory unit's power, ground, and antenna connectors. Install the new CarPlay module in the designated location (typically behind or integrated with the factory screen mount). Connect the power harness to the vehicle's ACC and Ground circuits; connect antenna to the module. Route the USB connection cable to your preferred mounting location (cup holder, armrest, or centre console). Reinstall dashboard trim panels, ensuring all clips and screws are secure. Reconnect the battery terminal and power on the vehicle. Pair your smartphone via Bluetooth in the system menu, then test wireless and USB connectivity. Calibrate EQ settings and verify steering wheel controls respond correctly. Note: Installation may void your factory warranty. We recommend professional fitment by a qualified Land Rover technician if you are unfamiliar with vehicle electrical systems. A printed step-by-step manual is included; refer to it and contact support if you encounter any issues. Ready to Elevate Your Evoque's Infotainment? Transform your Range Rover Evoque L538 with wireless CarPlay and Android Auto. Enjoy seamless navigation, hands-free calls, and premium audio control—all while keeping your eyes on the road and your hands on the wheel. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent specialist retailer and is not affiliated with Land Rover, Jaguar Land Rover plc, or any of their subsidiaries. Land Rover, Range Rover, Evoque, and related marks are registered trademarks of Jaguar Land Rover Limited. This product is designed for compatibility with the specified models and is sold as an aftermarket accessory. Installation may affect your vehicle's manufacturer warranty. Always consult your vehicle's handbook and a qualified technician before installation.

Victorious · Discovery 4 / Sport · Trim & Handles 8-Piece Door Handle Trim Set for Land Rover Discovery 4 & Range Rover Sport Premium ABS trim covers that refresh your interior door handles with a choice of four finishes. L319 / L320 2010–2016 ABS Construction 4 Finish Options 8-Piece Set ISO9001 Certified Overview Your Discovery 4 or Range Rover Sport's door handles see constant use—and over time, they show it. This eight-piece trim set modernises the interior handles with premium ABS covers available in matte silver, chrome silver, black, or gold finishes. It's a straightforward interior refresh that elevates the cabin without requiring major modification. Engineered from durable ABS plastic and certified to ISO9001 standards, these trim covers fit directly over existing handles on Discovery 4 (2010–2016), Range Rover Sport (2008–2013), and Freelander 2 (2011–2015) models. Each set covers all four doors plus additional trim points, giving your cabin a cohesive, finished appearance. Whether you're addressing cosmetic wear or simply want a sharper interior aesthetic, this trim set delivers an accessible upgrade that works with your vehicle's existing hardware. What's Included 🎯 8 Trim Covers Four doors, plus interior points ✨ Four Finish Options Matte silver, chrome, black, gold ⚙️ ABS Material Lightweight, impact-resistant polymer ✓ Certified Fit Direct application to OEM handles Product Highlights Covers all four interior door handle positions Available in matte silver, chrome silver, black, and gold ISO9001 certified manufacturing process Lightweight ABS construction minimises unsprung weight Protective design prevents handle wear and scratches No drilling or modification required Easy installation with fastener-free application Consistent finish across all eight pieces Direct fit for three Land Rover platforms 100-gram weight per set Compatibility Vehicle Model Year Range Fitment Land Rover Discovery 4 2010–2016 Direct Fit Range Rover Sport 2008–2013 Direct Fit Land Rover Freelander 2 2011–2015 Direct Fit Discovery 3 & Earlier Pre-2010 Not Compatible Range Rover Sport L494 2013+ Not Compatible Installation Difficulty: Beginner · Time: 15–20 minutes Open each door and clean the handle area with a soft cloth to remove dust and oils. Position the trim cover over the existing handle and align it with the mounting points. Press the cover firmly until it seats fully against the handle housing. Check all four doors and any additional trim points for even fit and finish. Allow 24 hours before heavy use to ensure adhesive (if applicable) has fully cured. Note: If trim covers use adhesive backing, ensure handles are completely dry before application. Some covers may require small fasteners—check your specific finish option for installation method. Ready to Refresh Your Interior? This eight-piece door handle trim set is an effortless way to elevate your Discovery 4 or Range Rover Sport's cabin finish. Choose your colour, install in minutes, and enjoy a sharper, more cohesive interior. Shop Discovery 4 Trim Shop Range Rover Sport Trim Use code 22GET20 for 20% off any two accessories. 4.9/5 – 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide DHL, FedEx, UPS, TNT Shipping UK +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket accessory designed for compatibility with the specified vehicles.

Victorious Automotive · Range Rover Vogue L405 · Exterior Trim 18-Piece High Gloss Black Exterior Trim Set — Range Rover Vogue L405 (2013–2017) A comprehensive full-exterior transformation kit engineered specifically for the L405 Vogue, delivering a unified gloss black aesthetic from bonnet to tailgate in a single package. Range Rover Vogue L405 2013–2017 High Gloss Black 18-Piece Set Exterior Trim Direct Replacement No Drilling Required Full Coverage Overview The Range Rover Vogue L405 is one of the most visually commanding vehicles on the road — a flagship SUV that rewards owners who take its appearance seriously. Whether your existing exterior trim has faded, chipped, or you simply want to elevate the look of your L405 beyond its factory specification, the exterior detail deserves the same level of attention as the interior. This 18-piece gloss black exterior trim set has been developed specifically for the Range Rover Vogue produced between 2013 and 2017. It covers every major exterior trim point — from the engine hood surround and front grille assembly through to the side vents, door trims, and tailgate finishers — ensuring the transformation is complete and consistent rather than piecemeal. The deep, mirror-like gloss black finish contrasts beautifully against the L405's bold body lines and works with any exterior colour in the Vogue palette. Rather than sourcing individual components over time, this full replacement pack gives you everything in one box. Each piece is pre-formed to match the original geometry of the L405's trim points, making fitment clean and straightforward without the need for cutting, drilling, or professional installation. For owners who want a blacked-out exterior presence with factory-level cohesion, this is the most efficient way to achieve it. What's Included 🔲 Engine Hood Trim Gloss black surround for the bonnet leading edge 🔳 Front Grille Full replacement grille surround in high gloss black ◼ Front Small Vents Pair of front bumper vent finishers 🔲 Side Vent Grilles Front quarter-panel vent surrounds, left and right 🚪 Door Side Trims Full set of door-line trim finishers across all doors ◼ Front Trims Additional front fascia accent trim pieces 🔲 Rear Trim Rear bumper and lower trim finisher in gloss black 🔳 Tailgate Trim Upper tailgate surround and handle area finisher 🔤 Range Rover Lettering Individual gloss black replacement letter badges Product Highlights Engineered exclusively for the Range Rover Vogue L405 2013–2017 body structure High gloss black finish — deep, mirror-polished surface with long-lasting clarity 18 pieces providing complete front-to-rear exterior coverage in one kit Direct replacement design — slots into factory trim positions without modification No drilling or cutting required for standard fitment Consistent finish across all components — no colour mismatch between pieces Compatible with all factory body colours including Fuji White, Santorini Black and Carpathian Grey Includes replacement Range Rover lettering for a fully blacked-out badge aesthetic Durable construction resistant to UV fade, water ingress, and road debris A cost-effective alternative to individual dealer-sourced or painted trim replacements Compatibility Vehicle Code Years Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–2021 Not Compatible – Facelift Trim Points Differ Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2018–2021 L405 Vogue or another vehicle in the Range Rover range, please contact us at +44 203 943 9919 and our team will advise on the correct kit for your specific build. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Trim removal tool, microfibre cloths, isopropyl alcohol Park the vehicle on a flat surface and allow all exterior panels to cool fully before beginning. Work in a clean, dry environment where possible. Using a plastic trim removal tool, carefully prise away the existing factory trim pieces starting from one corner to avoid cracking. Work methodically around each piece — do not force. Clean each mounting area thoroughly with isopropyl alcohol to remove any adhesive residue, wax, or contamination. Allow to dry completely before fitting new pieces. Dry-fit each replacement trim piece before final installation to confirm alignment and confirm clip or adhesive points line up correctly with the factory positions. Press each piece firmly into position, applying even pressure along the full length of each component until all clips or adhesive points are fully seated. For the Range Rover lettering, carefully align each individual letter using the existing badge positions or a level guide before pressing into place. Once all pieces are fitted, wipe down the entire exterior with a clean microfibre cloth and inspect all edges and joints for consistent fit and alignment. ⚠ Note: This set is designed as a full replacement for existing factory trim components. We recommend removing original trim pieces carefully and in sequence to avoid damage to the surrounding paintwork. If you are unsure at any stage, consult a professional detailer or bodywork specialist. Complete Your L405 Vogue This exterior trim set is one of the most impactful single upgrades you can make to your Range Rover Vogue L405. Browse our full collection of L405 accessories to find everything else your vehicle deserves. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Discovery Interior · Cabin Accessories Car Air Freshener Perfume Diffuser — Hanging Glass Bottle for Land Rover & Range Rover Interiors A refillable, elegantly weighted glass diffuser bottle that transforms the cabin atmosphere of your Land Rover or Range Rover with your choice of fragrance — hanging discreetly from the mirror with minimal effort. Discovery Interior Universal Fit Borosilicate Glass Refillable 8ml Capacity Silver / Black / Gold Essential Oil Compatible Hanging Mirror Mount Overview Every Land Rover and Range Rover owner understands that the interior experience matters as much as what happens beyond the tarmac. From the Defender's purposeful cabin to the Range Rover Vogue's wood-trimmed sanctuary, the environment inside your vehicle is an extension of your standard — and that includes scent. Generic tree-shaped fresheners simply don't belong in that equation. This hanging glass diffuser bottle is a considered alternative. Compact, transparent, and available in silver, black, or gold finishes to complement your interior hardware, it holds 8ml of your preferred perfume, essential oil, or fragrance blend. The glass construction allows the scent to diffuse naturally and gradually, without aerosol sprays or chemical-laden pads that can feel out of place in premium vehicles. The 21cm hanging rope suspends the bottle cleanly from your rear-view mirror, keeping it within the cabin airflow where diffusion is most effective. The bottle is fully refillable — simply top it up when the scent fades. It doubles as a subtle decorative ornament that adds character without cluttering the dash or vents. Clean, refined, and entirely at home in a Land Rover cabin. What's Included 🍶 Glass Diffuser Bottle 8ml capacity, transparent borosilicate glass with metal cap 🪢 Hanging Rope 21cm / 8.27" length — mirror-mount ready 🧴 Refillable Stopper Secure metal closure to control diffusion rate Product Highlights Transparent borosilicate glass — clear, elegant, scratch-resistant Fully refillable with any perfume, oil blend, or essential oil Available in Silver, Black, and Gold to match interior trim 8ml bottle capacity — long-lasting fragrance release 21cm rope suspends cleanly from any rear-view mirror stem No batteries, sprays, or plug-in required — entirely passive Compact 4.5cm height — unobtrusive in any cabin Doubles as a decorative ornament for home or office use Lightweight build — no swing vibration noise when driving Ideal gift for Land Rover, Range Rover, and Defender owners Compatibility Vehicle Code / Years Fitment Range Rover Vogue L460 · 2022–2026 Universal Fit Range Rover Vogue L405 · 2013–2020 Universal Fit Range Rover Sport L461 · 2022–2026 Universal Fit Range Rover Sport L494 · 2013–2020 Universal Fit Range Rover Sport L320 · 2005–2013 Universal Fit Defender L663 · 2020–2026 Universal Fit Land Rover Defender 2004–2016 Universal Fit Range Rover Velar 2018–2022 Universal Fit Range Rover Evoque L551 · 2019–2026 Universal Fit Range Rover Evoque L538 · 2011–2018 Universal Fit Land Rover Discovery 5 L462 · 2017–2026 Universal Fit Land Rover Discovery 4 L319 · 2009–2016 Universal Fit Land Rover Discovery 3 L319 · 2004–2009 Universal Fit Land Rover Discovery Sport L550 · 2015–2026 Universal Fit Toyota Land Cruiser LC250 / LC300 Universal Fit Mercedes G Class G-Wagon · All Years Universal Fit This product uses a universal mirror-hanging design and is compatible with any vehicle fitted with a standard rear-view mirror stem. Installation Notes Setup Guide — No Tools Required · Under 2 Minutes Remove the metal cap from the glass bottle and set aside. Using a small pipette or the bottle dropper, carefully fill the bottle with your chosen perfume or essential oil to the desired level (maximum 8ml). Replace the metal cap securely. Do not overtighten — the stopper is designed to allow gradual passive diffusion. Thread the hanging rope through the cap loop if not pre-attached, and tie a secure knot. Loop the rope over your rear-view mirror stem and adjust the hanging length to your preference. The bottle should hang freely without touching the windscreen. Allow 10–15 minutes for the fragrance to begin diffusing naturally into the cabin air. ⚠ Note: Do not overfill the bottle. Ensure the cap is seated firmly before driving to avoid spillage onto interior trim. Avoid placing the bottle in direct prolonged sunlight, which may accelerate diffusion and cause rapid fragrance loss. Keep away from leather and light upholstery surfaces when filling. Elevate Every Journey Your Land Rover deserves more than a generic air freshener. This glass diffuser bottle brings your chosen fragrance into the cabin on your terms — refined, refillable, and entirely in keeping with the vehicle around it. Browse the full Discovery Interior collection at Victorious Automotive. Shop Discovery Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, or any OEM brand referenced on this page. Vehicle names and model codes are used for fitment reference purposes only. All trademarks remain the property of their respective owners.

Victorious · Mercedes W205 · Infotainment Mercedes NTG5 Wireless Apple CarPlay & Android Auto Integration – 2015–2019 Seamless wireless smartphone mirroring for your Mercedes cabin, retaining factory controls and adding premium navigation, music, and voice command in one elegant interface. W205 / NTG5 2015–2019 Wireless CarPlay Android Auto OEM Integration Voice Control Overview This wireless CarPlay and Android Auto integration transforms your Mercedes-Benz W205 cabin into a modern connected hub. Compatible with A, B, C, E, G, CLA, GLA, GLC, and S-Class models equipped with NTG5 infotainment systems (7" and 8.4" displays), this interface bridges your smartphone seamlessly without sacrificing factory functionality. Built for the discerning Mercedes owner who demands reliability without compromise, the system maintains full access to steering wheel controls, rotary knob navigation, and all OEM features while adding wireless Bluetooth and WiFi connectivity. Access Google Maps, Waze, Apple Maps with live traffic, stream Spotify and Apple Music, and control everything via voice—all while keeping your hands on the wheel. Installation is straightforward for automotive electrical specialists, and the system retains compatibility with aftermarket camera systems. A 30-day money-back guarantee and our 4.9-star track record across 12,300+ verified reviews back every purchase. What's Included 📦 Wireless Interface Unit Plug-and-play integration module for NTG5 systems 📖 Installation Guide Step-by-step professional wiring documentation Product Highlights Wireless Bluetooth and WiFi connectivity with USB fallback option Apple CarPlay and AirPlay support for seamless iOS integration Android Auto mirroring with full smartphone app access Real-time GPS navigation via Google Maps, Waze, and Apple Maps Premium music streaming: Spotify, Apple Music, Amazon Music Hands-free voice control for safety and convenience Aftermarket camera compatibility maintained Retains factory steering wheel and knob controls EQ audio customization and USB media playback Drop-in integration with no screen replacement needed Compatibility Model Series Year Range Screen Size NTG System Status A-Class (W176) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible B-Class (W246) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible C-Class (W205) 2015–2019 7" / 8.4" NTG5.0–5.5 Compatible E-Class (W213) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible G-Class (W463) 2015–2019 7" / 8.4" NTG5.0–5.1 Compatible CLA-Class (C117) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible GLA-Class (X156) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible GLC-Class (C253) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible S-Class (W222) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible Pre-2014 or Non-NTG5 Before 2014 Any Older systems Not Compatible Installation Notes Difficulty Level: Intermediate Estimated Time: 1–2 hours with professional installation recommended. Disconnect the car battery to isolate power circuits. Remove the infotainment unit bezel and display trim using appropriate panel tools. Carefully disconnect all factory connectors from the rear of the NTG5 unit. Connect the wireless interface harness to the OEM connector block. Secure the interface module discreetly behind the dashboard or in a trim pocket. Reconnect the battery and power on the vehicle. Pair your smartphone via Bluetooth and test CarPlay or Android Auto connectivity. Verify all factory controls (steering wheel buttons, rotary knob) function correctly. Important: Ensure your vehicle's AUX functionality is enabled before purchase. If uncertain, consult your Mercedes dealer's configuration settings or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Professional installation by an automotive electrical specialist is strongly recommended to avoid damage to OEM systems. Ready to Elevate Your Cabin Tech? Transform your Mercedes infotainment into a modern wireless hub without sacrificing factory controls or reliability. Join over 12,300 satisfied owners who trust Victorious Automotive for premium integration solutions. Add to Cart Unlock 20% off any 2 items with code 22GET20 ✓ 4.9/5 Stars · 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT ✓ Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official Mercedes trademark holder. All product names and specifications are provided for compatibility reference only. Always verify compatibility with your specific vehicle before purchase. Installation is at the owner's risk; professional automotive electrical installation is recommended.

Victorious · BMW Mini · Infotainment BMW Mini 2017–2019 Wireless Apple CarPlay & Android Auto Integration Kit Seamless smartphone integration for your Mini EVO's 6.5" or 8.8" factory display—wireless CarPlay, Android mirroring, and full navigation in seconds. Mini EVO 2017–2019 Wireless CarPlay Android Auto 6.5" & 8.8" Plug-and-Play Overview For Mini EVO owners (2017–2019), factory infotainment systems often feel disconnected from modern smartphone ecosystems. This wireless Apple CarPlay and Android Auto integration kit bridges that gap entirely—turning your original 6.5" or 8.8" display into a fully functional smart hub, without replacing anything. The module installs discreetly into your car's AUX or AMI armrest interface and communicates wirelessly via Bluetooth and WiFi. Pair your iPhone or Android device once, and it connects automatically every time you drive. No cables. No clutter. Just seamless integration that feels factory. Access real-time GPS navigation, stream Spotify or Apple Music through your factory speakers, control everything via steering wheel buttons or voice (Siri for iPhone users), and enjoy camera support for aftermarket dash and 360° systems. The system preserves all OEM touch and physical controls, meaning your Mini drives and feels like a Mini—just smarter. What's Included 📱 Wireless CarPlay/Android Auto Module Main processing unit with Bluetooth, WiFi, and antenna 🔧 Installation Kit Connectors, brackets, and adhesive for your car's AUX/AMI interface 📖 Comprehensive User Manual Setup, pairing, and troubleshooting guide with diagrams Product Highlights Wireless Bluetooth & WiFi connectivity—no cables required Apple CarPlay (wireless and wired modes) with Siri voice control Android Auto mirroring for Android devices Live GPS navigation with real-time traffic data Stream Spotify, Apple Music, Amazon Music, and more Supports aftermarket front, rear, and 360° camera systems USB port for direct music and video playback Adjustable 10-band equalizer for audio optimization Full OEM steering wheel and touch screen button compatibility AirPlay and Apple Mirroring via USB connection Compatibility Model Year Display Compatibility Mini EVO 2017–2019 6.5 inch Direct Fit Mini EVO 2017–2019 8.8 inch Direct Fit Other Mini variants 2017–2019 Any Not Compatible Pre-Purchase Check: Your Mini must have an AUX input or AMI (Apple Music Interface) in the armrest box for installation. Verify this before ordering. Installation ⏱ Estimated Time: 30–45 minutes | Difficulty: Intermediate Power off your Mini and remove the armrest box from the center console (gentle pry with a trim tool). Locate the AUX or AMI connector inside. Disconnect it carefully. Connect the wireless module to the AUX/AMI port using the supplied connector. Use the adhesive bracket to secure the module inside the armrest cavity. Route antenna toward the windshield. Reinstall the armrest box and power on your Mini. Go to your car's Bluetooth settings and pair your smartphone to the module (search for "[Device Name]"). Open Apple CarPlay or Android Auto on your phone and accept permissions. Select the wireless module from your phone's CarPlay settings to confirm connection. Test CarPlay/Android Auto on your 6.5" or 8.8" display. You're done. Note: The module requires continuous 12V power. If your armrest AUX doesn't provide power, a separate 12V tap may be needed. Consult the manual or contact our team. Upgrade Your Mini's Infotainment Today Wireless Apple CarPlay and Android Auto aren't luxuries—they're essentials for staying connected while driving. This kit installs cleanly, works reliably, and transforms your Mini EVO's factory display into a modern smart hub. Shop Now Use code 22GET20 for 20% off when you buy 2+ items ✓ 30-day money-back guarantee ✓ 4.9/5 stars from 12,300+ verified reviews ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Mon–Fri support +44 203 943 9919 Victorious Automotive is not affiliated with or endorsed by BMW, Mini, Apple, or Google. Apple CarPlay and Android Auto are registered trademarks of their respective owners. All references to vehicle models, years, and specifications are for compatibility guidance only. Always verify fitment with your vehicle's exact specification before purchase.

Victorious · Land Rover / Jaguar · Infotainment Wireless Apple CarPlay & Android Auto for Land Rover Discovery Sport & F-Pace Upgrade your factory infotainment with wireless smartphone integration, navigation apps, and seamless OEM control. Discovery Sport L550 F-Pace X761 Discovery 5 L462 2015–2023 Wireless + Wired Apple CarPlay Android Auto Overview Your Land Rover Discovery Sport, F-Pace, or Discovery 5 deserves infotainment that keeps pace with modern smartphone apps. Land Rover InControl has limitations: no Spotify, Waze, Google Maps, or WhatsApp integration. This wireless Apple CarPlay and Android Auto module breaks through those constraints, giving you the apps and navigation you rely on while maintaining full OEM steering wheel and touchscreen control. This retrofit Android box integrates seamlessly into your factory display. Switch between the Land Rover interface and your preferred smartphone ecosystem by pressing NAV or Home—no permanent changes, full reversibility. Wireless CarPlay via Bluetooth and WiFi, wired CarPlay via Lightning cable, or Android Mirroring via USB Link. Add aftermarket front, rear, or 360° cameras with dynamic guidance lines. Control music, navigation, and voice commands through Apple Siri or your vehicle's steering wheel buttons. Built for Discovery Sport (L550), F-Pace (X761), and Discovery 5 (L462) owners who demand modern connectivity without sacrificing the reliability and refinement of their Land Rover or Jaguar. What's Included 📦 Android Box Module Wireless CarPlay & Android Auto unit 🔌 USB Dongle Android Mirroring & wired CarPlay adapter 📡 WiFi & Bluetooth Wireless connectivity for all devices 🔊 Advanced EQ Customisable audio profiles (Pop, Rock, Soft, Standard) Key Features Wireless Apple CarPlay via Bluetooth & WiFi pairing Wired CarPlay via Lightning cable connection Android Mirroring via USB Link & dongle Google Maps, Waze, Apple Maps with live traffic Spotify, Apple Music, Amazon Music via factory speakers Voice control with Siri integration Support for aftermarket 360° cameras with dynamic guidance USB media playback (music & video files) Full steering wheel button compatibility One-touch toggle between Land Rover & smartphone interface Compatibility Vehicle Model Year Range Status Land Rover Discovery Sport 2015–2023 Direct Fit Jaguar F-Pace 2015–2023 Direct Fit Land Rover Discovery 5 2017–2023 Direct Fit Range Rover Sport L494 2013–2020 Check AUX/AMI Range Rover Vogue L405 2013–2020 Check AUX/AMI Important: Before ordering, confirm your vehicle has an active AUX input or an AMI (Aston Martin Interface) connection in the armrest storage box. This module requires compatible audio routing to function correctly. Installation & Setup Difficulty: Intermediate | Time: 60–90 minutes Prepare. Gather the module, USB dongle, and documentation. Identify the AUX or AMI connector in your armrest storage box or beneath the centre console. Power down. Turn off the ignition and disconnect the negative battery terminal for 30 seconds to reset the infotainment system. Connect audio. Locate the AUX or AMI connector and plug the module's audio input cable. Route cables neatly behind the trim panel to avoid pinching or heat exposure. Secure the box. Mount the Android box in a location with adequate airflow (typically above or below the infotainment unit). Use supplied brackets or adhesive pads. USB dongle setup. For wired Android Mirroring or CarPlay, connect the USB dongle to the module and route the cable to the front-facing USB port of your vehicle. Bluetooth pairing. Power the module. On your iPhone or Android phone, search for the module's Bluetooth ID and pair. For wireless CarPlay, ensure WiFi is enabled on both the module and your phone. Test navigation. Open Google Maps, Waze, or Apple Maps. Confirm touchscreen and steering wheel controls work. Toggle between Land Rover and smartphone interfaces using the NAV or Home button. Audio calibration. Adjust the equaliser settings (Pop, Rock, Soft, Standard) to your preference using the on-screen menu. Camera setup (optional). If adding aftermarket cameras, connect them to the module's camera inputs. Enable dynamic guidance lines in settings. Reconnect battery. Restore the negative terminal. Perform a full system reset by holding the power button for 10 seconds. Test all functions. Note: If your vehicle does not have an active AUX or AMI interface, this module will not function. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to verify compatibility before installation. Elevate Your Infotainment Stop settling for limited factory navigation and music apps. Bring wireless CarPlay, Android Auto, and your favourite apps into your Discovery Sport, F-Pace, or Discovery 5 with plug-and-play ease. Full steering wheel control. Zero loss of OEM functionality. Shop Discovery Sport Shop Discovery 5 Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ 4.9★ from 12,300+ reviews ✓ Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar, or JLR. Land Rover®, Jaguar®, Discovery®, F-Pace®, and Range Rover® are registered trademarks of Jaguar Land Rover Ltd. All product names and specifications are for reference only.

```html Victorious Automotive · Audi · Connectivity Magnetic Phone Mount for All Audi Models – Premium In-Car Navigation Secure, minimalist phone holder engineered for flawless dashboard integration in any Audi or compatible vehicle. All Audi Years Universal Fit Neodymium Magnet Air Vent Mount Black Overview Whether you're navigating Audi's sophisticated dashboard or any compatible vehicle interior, this Magnetic Phone Mount delivers what serious drivers demand: rock-solid stability, uncluttered aesthetics, and zero compromise on functionality. Designed for the demanding requirements of modern motoring, it holds any smartphone securely while you focus on the road. The mount uses aerospace-grade neodymium magnets engineered to grip your phone with unwavering confidence, even on rough terrain or spirited driving. The elegant black finish integrates seamlessly into premium interiors, maintaining the refined look your Audi or comparable vehicle deserves. Installation is as straightforward as it gets—attach to your air vent in seconds, position your phone, and you're ready to drive. No drilling, no adhesive residue, no permanent modifications. This is precision engineering for those who refuse to compromise on either quality or practicality. What's Included 📱 Magnetic Phone Mount Premium black finish, universal grip Product Highlights Neodymium magnet technology ensures unshakeable phone security during acceleration and cornering Compatible with iPhone X, XS, XR, Samsung S10, S10e, Lite, and 50+ smartphone models Air vent attachment—no dashboard adhesive, no permanent modifications required Premium black construction designed for Audi and premium vehicle interiors Minimal profile maintains clean, uncluttered cabin aesthetics Supports phones weighing up to 200g without slip or drift Tool-free installation—takes under 30 seconds to fit Rotatable grip allows portrait or landscape orientation for navigation and calls Durable materials withstand extreme temperatures and UV exposure Works seamlessly with wireless charging cases and phone protection Compatibility Device Category Models Status Apple iPhone X, XS, XR, 11, 12, 13, 14, 15 (all sizes) Direct Fit Samsung Galaxy S10, S10e, S10 Lite, S20, S21, S22, S23, S24 Direct Fit Xiaomi / Redmi Redmi 4X, Note series, 12 and above Direct Fit OPPO / Huawei P30, P40, Mate series, Find X models Direct Fit Other Android HTC, OnePlus, Google Pixel, LG (up to 200g) Direct Fit Audi Vehicle Integration All Audi models and year ranges Direct Fit Installation Difficulty: Beginner | Time: 30 seconds Locate your vehicle's air vent (typically on dashboard or centre console) Ensure the vent grilles are clean and unobstructed Slide the magnetic mount's grip into the vent slats—the clips secure it instantly Angle the mounting head to your preferred viewing position Place your smartphone on the magnetic surface—it adheres immediately Adjust for portrait or landscape orientation as needed for navigation or hands-free calling Important: Test the grip with gentle upward pressure before relying on the mount while driving. Ensure your phone case is compatible with magnetic attachment (most modern cases are; metal-backed cases may reduce magnetic hold). Ready to Upgrade Your Drive? Transform your cabin with premium connectivity that matches the precision engineering of your Audi or compatible vehicle. Secure your phone, keep your hands free, and maintain the refined look you've invested in. Shop Now Use code 22GET20 for 20% off when you order any 2 items 30-Day Money Back Guarantee 4.9★ Rated (12,300+ reviews) Worldwide Shipping via DHL, FedEx, UPS Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Audi AG, Volkswagen Group, Jaguar Land Rover, or any original equipment manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners and are used for identification purposes only. ```

```html Victorious · Jaguar · Interior Trim Carbon Fiber ABS Center Console Trim for Jaguar XE, XEL, XF, XFL & F-Pace Premium precision-cut carbon fiber console trim elevates your Jaguar's interior with a modern, aggressive finish. XE & XEL XF & XFL F-Pace 2016–2020 ABS Carbon Fiber Direct Fit Overview This carbon fiber ABS center console trim is engineered for Jaguar owners who demand precision and visual impact. Whether you're upgrading a Jaguar XE, XEL, XF, XFL, or F-Pace, this trim transforms your dashboard with a sophisticated, modern aesthetic that commands attention. High-quality ABS construction mimics the appearance of authentic carbon fiber while delivering superior durability and scratch resistance. Each trim is precision-cut to fit seamlessly into your console, with no modification required. Installation is straightforward using automotive-grade adhesive tape—no tools, no fuss. This is one of the most cost-effective ways to refresh your Jaguar's interior. It catches light beautifully, adds depth to your dash, and signals that you care about the details. What's Included 📦 Center Console Trim Precision-cut ABS carbon fiber panel 🔧 Adhesive Tape Factory-spec automotive-grade backing Product Highlights Precision-cut ABS construction mimics carbon fiber finish Direct fit—no drilling, cutting, or modifications Pre-applied automotive adhesive tape for secure mounting Seamless integration with OEM Jaguar interior design Scratch-resistant surface maintains finish over time Simple installation in under 15 minutes Instantly upgrades cabin aesthetics and perceived quality Compatible with XE, XEL, XF, XFL & F-Pace 2016–2020 Single-piece trim—simplified installation Engineered for daily durability and long-term retention Compatibility Jaguar Model Year Range Fit Status XE 2016–2020 Direct Fit XEL 2016–2020 Direct Fit XF 2016–2020 Direct Fit XFL 2016–2020 Direct Fit F-Pace 2016–2020 Direct Fit E-Pace 2018–2020 Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Prepare the area: Clean the center console trim surface with a damp microfiber cloth. Allow to dry completely (5 minutes minimum). Peel adhesive backing: Carefully remove the adhesive tape backing from the trim panel. Align and press: Position the trim over your console, starting from the top. Press firmly in sections, working downward to avoid air bubbles. Secure edges: Once positioned, apply firm pressure across the entire trim for 30 seconds to ensure full adhesion. Allow cure time: Leave the vehicle undisturbed for 24 hours before operating the climate controls or adjusting console components. Note: Adhesive reaches full strength after 24 hours. Avoid touching or moving the trim during this period for optimal durability. Upgrade Your Jaguar Interior Today Transform your XE, XF, or F-Pace with this premium carbon fiber center console trim. Modern, durable, and installed in minutes. Shop the complete collection of Jaguar interior upgrades now. View All Jaguar Trim Use code 22GET20 for 20% off any 2 items 4.9/5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx & UPS shipping ✓ UK support: +44 203 943 9919 Victorious Automotive is not affiliated with Jaguar Land Rover, Jaguar Cars Limited, or any official Jaguar distributor. All vehicle names, logos, and specifications are the property of their respective manufacturers. This product is designed for aftermarket fitment only. Always consult your vehicle's manual before installation. Victorious Automotive accepts no liability for improper installation or damage resulting from use. ```

Jaguar · E-Pace · Interior Trim Carbon Fiber Style ABS Interior Door Speaker Trim for Jaguar E-Pace 2018–2019 Premium carbon fiber aesthetic upgrade that transforms your E-Pace cabin with a modern, sporty finish. E-Pace 2018–2019 Carbon Fiber Style ABS Material Door Speaker Frame 4-Piece Set Overview The Jaguar E-Pace delivers refined design inside and out, but your cabin deserves touches that match its exterior sophistication. This 4-piece carbon fiber style ABS interior door speaker trim set elevates the aesthetics of your 2018–2019 E-Pace's cabin zones, adding contemporary visual depth and a premium feel to every door panel. Each piece is precision-molded from high-quality ABS plastic and finished in authentic carbon fiber-look weave, giving your speakers the appearance of carbon fiber trim without the weight or cost. The set covers all four door speaker frames, creating a coordinated, factory-quality upgrade that catches light and draws admiration from everyone who steps inside. Installation is straightforward—no drilling, no modifications to your E-Pace's original structure. Simply remove the factory speaker trim and clip these pieces in place. The result is an instant transformation of your cabin's interior character, elevating the sophistication of your driving environment. What's Included 🎯 4-Piece Trim Set Left and right front and rear door speaker frames ✨ Carbon Fiber Finish Authentic weave appearance, durable ABS construction 🔧 Clip-On Installation No cutting, drilling, or adhesive required ✅ Factory-Quality Fit Precision-molded for your 2018–2019 E-Pace Product Highlights Complete 4-piece door speaker trim set for all four door panels Realistic carbon fiber weave finish for premium cabin appearance Durable ABS plastic construction resists fading and wear Clip-on design eliminates modification to original trim Instant installation—no tools or adhesive needed Factory-quality fit and finish for Jaguar E-Pace 2018–2019 Enhances cabin cohesion with coordinated interior styling Lightweight and UV-stable for long-term durability Catches ambient light for added visual depth in cabin Easy removal and reinstallation without permanent marks Compatibility Vehicle Years Compatibility Jaguar E-Pace 2018–2019 Direct Fit Jaguar E-Pace 2020+ Not Compatible Jaguar F-Pace All Years Not Compatible Other Jaguar Models All Years Not Compatible Installation Notes 📍 Difficulty: Beginner | Time: 15–20 minutes Open all four doors of your E-Pace to access door speaker trim panels Gently pry off the factory speaker trim using a plastic trim removal tool (or flathead screwdriver wrapped in cloth) Clean the mounting area with a soft, dry cloth to remove dust and debris Align the new carbon fiber trim piece with the mounting clips on the door panel Press firmly until you hear or feel a click, confirming the clip engagement Repeat steps 2–5 for the remaining three door panels Step back and admire your upgraded E-Pace cabin from both inside and outside the vehicle Note: Do not apply excessive force when removing factory trim—it's held by simple clips. Work slowly and gently to avoid cracking. If clips feel stuck, gently flex the panel from multiple angles before pulling outward. Ready to Elevate Your E-Pace Cabin? Transform your Jaguar E-Pace's interior with contemporary carbon fiber styling. A simple, reversible upgrade that looks factory-quality and feels premium every time you open a door. Add to Cart Use code 22GET20 for 20% off any 2 items 30-Day Money-Back Worldwide Shipping 4.9★ Verified Reviews +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Jaguar Cars Ltd., or any official Jaguar entity. Jaguar is a registered trademark of Jaguar Land Rover Limited. All vehicle names, logos, and brands are the property of their respective owners. This product is designed as an aftermarket accessory and is sold for cosmetic enhancement purposes only.