Key Covers

Victorious Automotive · Range Rover Vogue L405 · Interior Trim Range Rover Vogue L405 Interior Door Trim Strips (2013–2020) Precision-fit metallic TPU door trim strips that bring a refined, factory-finish aesthetic to every door panel of your L405 Vogue. Range Rover Vogue L405 2013–2020 High-Grade TPU Metallic Finish Peel & Stick Set of 4 Interior Upgrade No Drilling Required Overview The Range Rover Vogue L405 is a vehicle that sets the benchmark for luxury SUV interiors — and every detail matters. From the stitched leather door cards to the brushed metal accents, owners of the L405 understand that the cabin is as much a statement as the exterior. Over time, however, door trim edges can show signs of wear, scratches, or simply lack the visual definition that distinguishes a truly refined interior. These Interior Door Trim Strips are engineered specifically for the L405 Vogue platform, profiling the exact contours and dimensions of the 2013–2020 model's door cards. Crafted from high-grade TPU with a premium metallic finish, each strip mirrors the factory aesthetic while adding a subtle, elegant accent line across all four doors. The result is an interior that looks cohesive, considered, and unmistakably premium. Installation requires no specialist tools, no drilling, and no professional fitting — the pre-applied adhesive backing bonds cleanly to clean, dry door panels in minutes. Whether you're refreshing a well-loved L405 or adding a finishing touch to a recent purchase, these strips deliver an upgrade that punches well above their price point. What's Included 🚪 Front Left Door Strip Pre-cut for L405 driver door panel 🚪 Front Right Door Strip Pre-cut for L405 passenger door panel 🚪 Rear Left Door Strip Matched profile for rear door card 🚪 Rear Right Door Strip Matched profile for rear door card 🧴 Cleaning Wipe Surface prep wipe for optimal adhesion 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut specifically for the Range Rover Vogue L405 door card profile High-grade TPU construction — flexible, impact-resistant, and long-lasting Premium metallic finish complements factory chrome and brushed aluminium trim Peel-and-stick application — no tools, no drilling, no professional fitting needed Full set of four strips for a consistent, all-door cabin transformation Resistant to UV fading, heat, and humidity inside the cabin environment Adhesive backing rated for long-term bond on automotive-grade interior surfaces Protects door card edges from everyday scuffs, scratches, and contact wear Compatible with all L405 trim levels including SE, HSE, Autobiography, and SVAutobiography Reversible upgrade — strips can be removed cleanly without damaging door cards Compatibility Vehicle Model Code Years Trim Level Fitment Range Rover Vogue L405 2013–2020 SE Direct Fit Range Rover Vogue L405 2013–2020 HSE Direct Fit Range Rover Vogue L405 2013–2020 Autobiography Direct Fit Range Rover Vogue L405 2013–2020 SVAutobiography Direct Fit Range Rover Vogue L460 2022–2026 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Range Rover Velar L560 2018–2022 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔧 Tools Required: None Open all four doors and allow the interior to reach ambient room temperature — cold surfaces can reduce initial adhesion. Using the included cleaning wipe (or a 70% isopropyl alcohol wipe), thoroughly clean each door card surface where the strip will be applied. Remove any dust, grease, or residue and allow to dry fully. Dry-fit each strip against the door panel before committing — confirm alignment along the trim edge and note the correct positioning for each door. Peel back approximately 2–3cm of the protective backing from one end of the strip. Begin pressing firmly from one end, slowly peeling and pressing as you work along the full length of the door card. Once positioned, run your thumb or a clean cloth firmly along the entire strip to activate the adhesive bond across its full length. Repeat for all four doors. Avoid washing the interior surfaces or applying any conditioners near the strips for 24 hours to allow the adhesive to fully cure. ⚠ Please Note: Do not apply to surfaces that are damp, freshly conditioned with silicone-based products, or heavily textured. For best long-term results, avoid direct contact with steam cleaning equipment near the strip edges after installation. Complete Your L405 Vogue Interior Browse the full range of interior and exterior accessories designed specifically for the Range Rover Vogue L405 — every product precision-matched to your vehicle. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of vehicle compatibility identification.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Front Grille Replacement for Range Rover Sport L494 (2014–2017) A bold, precision-formed ABS grille in high gloss black — designed to replace your factory unit and immediately sharpen the front-end presence of your Range Rover Sport. Range Rover Sport L494 2014–2017 High Gloss Black ABS Construction Direct Replacement No Drilling Required OEM-Style Fit Front Grille Overview The Range Rover Sport L494 (2014–2017) is a vehicle that strikes a careful balance between restrained British elegance and commanding road presence. The front grille is one of the most defining visual elements on the Sport — it frames the bonnet line, anchors the headlights, and sets the tone for the entire aesthetic. If your factory grille has become tired, damaged, or simply no longer reflects how you want your Sport to look, replacing it is one of the most impactful single modifications you can make. This High Gloss Black Front Grille has been engineered specifically for the Range Rover Sport L494 facelift and pre-facelift models produced between 2014 and 2017. Constructed from high-quality ABS thermoplastic, it replicates the geometry and mounting points of the original unit to the millimetre — allowing for a clean, rattle-free fitment without any modification to your vehicle's bodywork or wiring. The high gloss black finish adds a darkened, contemporary edge that complements the Sport's inherently athletic character. Whether you're refreshing a worn-out original or simply pursuing a blacked-out front-end aesthetic, this grille delivers a meaningful visual upgrade with a straightforward installation process. It's the kind of detail that separates a cared-for Sport from everything else on the road. What's Included 🔲 High Gloss Black Front Grille 1x full replacement grille unit — pre-assembled and ready to fit 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Engineered exclusively for Range Rover Sport L494 (2014–2017) — no universal-fit compromise High gloss black ABS finish delivers a premium, showroom-quality appearance Direct OEM replacement — uses all factory mounting points and clips No drilling, cutting, or bodywork modification required Durable ABS thermoplastic construction resists impact, UV fade, and road debris Replicates original grille geometry for a seamless, rattle-free fit Suitable for both pre-facelift and mid-cycle Sport variants within the 2014–2017 window Complements blacked-out trim packages and SVR-inspired styling builds Lightweight construction — does not affect aerodynamic balance or air intake flow Tool fitment achievable with standard workshop tools in under an hour Compatibility Vehicle Code Years Trim / Notes Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport L494 2013 First model year — grille surround differs Verify Before Purchase Range Rover Sport L494 2018–2022 Post-facelift — revised grille architecture Not Compatible Range Rover Sport L461 2022–2026 New generation — entirely different platform Not Compatible Range Rover Vogue L405 2013–2021 Different grille design and dimensions Not Compatible Range Rover Velar L560 2018–2022 Closed-face grille — not applicable Not Compatible Installation Notes Difficulty: Beginner · Estimated Time: 30–60 minutes · Tools Required: Trim removal tools, T20 Torx driver Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for improved access to the upper grille mounting points. Using a plastic trim removal tool, carefully prise the existing grille away from the bumper surround, starting from the outer edges and working inward to disengage the retaining clips without cracking the bumper fascia. Locate and remove any Torx screws (typically T20) securing the grille to the upper bumper bracket. Keep all hardware — some clips and screws may be reused during installation of the new unit. Fully remove the original grille and set aside. Clean the mounting recess with a dry cloth to remove any accumulated road grime before fitting the replacement. Align the new High Gloss Black Grille with the factory aperture, ensuring all clip housings are correctly positioned against their corresponding receptacles in the bumper surround. Apply firm, even pressure across the grille face to engage all retaining clips simultaneously. Refit any Torx screws removed in step 3 and torque to hand-tight. Inspect the grille perimeter to confirm uniform gaps and a flush fit against the bumper. Close the bonnet and step back to confirm alignment from distance before driving. ⚠ Important: Always use plastic trim removal tools — metal tools risk permanent scratching of the bumper paint and grille finish. If your vehicle has a front parking sensor cluster integrated into the grille surround, verify sensor positioning and clearance after fitment before driving at speed. When in doubt, consult a qualified automotive technician. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product we stock is chosen with one type of customer in mind — the owner who genuinely cares about their vehicle. If you have any questions about fitment, finish compatibility, or combining this grille with other exterior styling parts for your L494 Sport, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Rear Tailgate Lip Spoiler for Range Rover Sport (2014–2020) Premium carbon fiber tailgate enhancement designed to elevate your Sport's rear profile with authentic styling and lasting durability. L494 2014–2020 Carbon Fiber Tailgate Lip Weather-Resistant Direct Fit Overview The Range Rover Sport L494 (2014–2020) commands presence on any road. This Carbon Fiber Rear Tailgate Lip Spoiler refines that authority by adding contemporary styling to the vehicle's rear fascia—a subtle but unmistakable upgrade that separates thoughtfully equipped Sports from standard builds. Machined from genuine carbon fiber, this lip transforms the tailgate's lower edge with clean lines and a contemporary aesthetic. The material's inherent lightweight properties—combined with superior weather resistance—mean this piece endures seasons of UK weather, UV exposure, and daily use without degradation or fading. Installation is straightforward for most owners, though professional fitting ensures the perfect gap and alignment. Once fitted, you'll notice the visual impact immediately: a more sculpted rear, sharper lines, and a finish that signals the level of care you invest in your Sport. What's Included 🎯 Carbon Fiber Lip Single-piece tailgate spoiler, precision-fitted for L494 ⚙️ Mounting Hardware Stainless fasteners and adhesive strips included 📋 Installation Guide Step-by-step instructions with torque specs 🛡️ 30-Day Guarantee Full refund if you're not completely satisfied Product Highlights Genuine carbon fiber construction—lightweight yet rigid Precision-engineered fit for 2014–2020 L494 models Weather-resistant finish withstands rain, salt, and UV Professional-grade adhesive and stainless steel hardware Clean, modern profile enhances rear visual depth Enhanced aerodynamic geometry aids downforce No drilling required—adhesive or bolt-on installation Maintains OEM paint compatibility and panel gaps Backed by our 30-day money-back guarantee Proudly stocked by Victorious Automotive since 2019 Compatibility Model & Year Generation Status Range Rover Sport 2014–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 Not Compatible Range Rover Sport 2010–2013 L320 Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Check your VIN or chassis plate before ordering. We're here to confirm compatibility: +44 203 943 9919, Mon–Fri 9am–7pm. Installation Difficulty: Moderate | Time: 45–90 minutes Prepare the surface: Clean the tailgate's lower edge thoroughly with isopropyl alcohol. Let dry completely (10 minutes). Test fit: Position the lip without adhesive to verify alignment with the tailgate and body line. Mark any final adjustments. Apply adhesive: Using the supplied heavy-duty automotive tape or adhesive beads, apply to the rear mounting surface of the lip. Secure fasteners: If using bolt-on method, drill pilot holes and install stainless steel fasteners hand-tight, then torque to 8 Nm. Press and hold: Press the lip firmly onto the tailgate for 60 seconds to ensure full adhesive contact. Cure time: Allow 24 hours before exposing to water or vehicle movement for maximum adhesive strength. Professional Installation Recommended: If you're unfamiliar with carbon fiber fitment or adhesive application, book a professional installer. Poor alignment can compromise aesthetics and water sealing. Victorious can recommend approved fitters in your region—call us. Why Choose This Spoiler Carbon fiber isn't just about weight savings—it's about permanence. Unlike paint-matched plastic lips that fade and crack, genuine carbon fiber deepens in character, resists salt spray, and requires nothing more than occasional water rinse and a soft cloth. The L494 Sport is already aggressive. This lip simply completes that story, adding a contemporary accent that signals refinement without shouting. It pairs beautifully with black window trim, darkened lights, or a full aero package. Ready to Elevate Your Sport? Authentic carbon fiber. Direct fit. 30-day guarantee. Worldwide shipping via DHL, FedEx, or UPS. Shop Carbon Fiber Tailgate Lips Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping included +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Product compatibility information is provided in good faith for reference only; always confirm fitment with your vehicle's specific year, chassis code, and configuration before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Hood Vents for Range Rover Sport L494 Genuine carbon fiber vents that enhance cooling airflow while adding understated motorsport styling to your L494. L494 2014–2020 Carbon Fiber Direct Fit Engine Cooling Overview The Range Rover Sport L494 (2014–2020) is a dynamic performance SUV that demands equally compelling aesthetics. These carbon fiber hood vents are engineered to replace your OEM vents with genuine, lightweight carbon fiber units that enhance both form and function without compromise. Beyond visual impact, these vents facilitate active heat dissipation from the engine bay, supporting cooler running temperatures during sustained driving and towing. The purposeful design integrates seamlessly with the L494's existing bonnet geometry, requiring no modification or custom drilling—installation is a straightforward bolt-on upgrade. Finished in premium gloss carbon weave, they deliver the same material and precision you'd find on motorsport vehicles, elevating your Range Rover's presence while delivering tangible thermal benefits. What's Included 🏁 Carbon Fiber Hood Vents (Pair) Left & right, gloss finish, ready to install 🔧 Stainless Steel Fasteners All hardware required for direct fit 📋 Installation Guide Step-by-step instructions included Product Highlights 100% genuine carbon fiber construction with superior strength-to-weight ratio Gloss finish carbon weave for factory-quality aesthetic Engineered for direct fit with no modifications required Improves engine bay cooling and thermal management Adds motorsport visual character to your L494 Lightweight alternative to OEM plastic vents Durable resin matrix resists UV degradation Includes all stainless steel fasteners and hardware Simple hand-tool installation (no welding or drilling) Backed by our 30-day money-back guarantee Compatibility Model Year Range Fit Status Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2010–2013 Not Compatible Always verify your model year and chassis code before ordering. Check your V5C registration document or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure. Installation Difficulty: Easy · Time: 30–45 minutes Park your Range Rover on a level surface and allow the engine to cool fully. Locate the factory hood vents on either side of the bonnet, just aft of the windscreen frame. Unscrew the three fasteners securing each OEM vent using a T25 Torx driver. Carefully lift and remove the original plastic vents, noting the gasket location. Clean the vent mounting surface with a microfiber cloth to remove any debris or residue. Position each carbon fiber vent, ensure alignment with the bonnet profile, then insert the stainless steel fasteners. Tighten each fastener progressively and evenly to 8 Nm (6 ft-lb) using a torque wrench. Step back and inspect both vents for flush alignment and consistent gaps. Your new carbon fiber hood vents are now active and ready to enhance cooling and styling. Professional Installation Recommended: If you prefer not to install these yourself, our network of Victorious-certified technicians can fit them in approximately one hour. Contact us for installer availability in your region. Complete Your L494 Upgrade Carbon fiber hood vents are the signature finishing touch for a purposefully styled Range Rover Sport. Pair them with our carbon fiber splitters, side skirts, or diffusers to elevate your L494's entire exterior presence. Explore L494 Collection Order today and use code 22GET20 to unlock 20% off when you purchase any two Victorious items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Jaguar Land Rover Limited, the official manufacturer of Range Rover, Defender, Land Rover, and Discovery vehicles. All product names, logos, and brands remain the property of their respective owners. This product is designed, manufactured, and distributed by Victorious Automotive in accordance with all applicable automotive and safety standards.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Side Vents for Range Rover Sport L494 Lightweight carbon fiber side vents that sharpen your Sport's profile while improving aerodynamic flow. L494 2018–2020 Carbon Fiber Aerodynamic Direct Fit Overview The Range Rover Sport L494 is engineered for dynamic performance and refined aesthetics. These carbon fiber side vents build on that DNA by adding visual aggression and functional ventilation to your Sport's flanks, instantly elevating its presence on any road. Our carbon fiber vents are constructed from genuine, waterproof material and engineered for direct fit installation. They integrate seamlessly with the OEM body line, creating a cohesive, purposeful look that speaks to your attention to detail. The lightweight construction preserves your Sport's performance without unnecessary weight. Whether you're refining your Sport's stance or preparing for a full aerodynamic upgrade, these vents are the foundation of a truly distinctive appearance. What's Included 🎁 2 × Carbon Fiber Side Vents One pair, driver + passenger side 📋 Installation Guide Step-by-step instructions included ✓ Adhesive Backing Pre-applied for quick, secure fit 📦 Protective Packaging Damage-free delivery guaranteed Product Highlights 100% genuine carbon fiber construction Waterproof and UV-resistant finish Seamless direct fit for L494 (2018–2020) Lightweight design preserves performance Enhances aerodynamic flow Pre-installed adhesive backing No drilling or modifications needed OEM-matched body integration Professional appearance, DIY installation Backed by 30-day money-back guarantee Compatibility Model Year Range Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Verify your vehicle's model year and body code before ordering. These vents are engineered exclusively for the L494 generation (2018–2020). If you own a different generation, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) for alternatives. Installation Difficulty: Beginner | Time: 15–20 minutes Prepare the surface. Clean both sides of your Sport's body with isopropyl alcohol and allow to dry completely. This ensures optimal adhesive contact. Position the vents. Dry-fit each vent on its respective side (driver/passenger) to verify alignment with the body line. Apply the vents. Carefully peel back the adhesive backing and press firmly from top to bottom, working out any air bubbles. Set and cure. Allow 24 hours of cure time before washing or exposing the vents to moisture. Inspect edges. Check all perimeter edges for secure adhesion. Use heat from a heat gun if needed to improve bond strength in cold conditions. Important: Ensure your Sport's body surface is clean and dry before installation. Installation in temperatures below 10°C may reduce adhesive strength—wait for warmer conditions if possible, or use a heat source to warm the application area. Complete Your L494's Look Carbon fiber side vents are the finishing touch that transforms your Range Rover Sport from standard to standout. Pair them with our matching aerodynamic upgrades for a fully integrated, purposeful aesthetic. Shop Range Rover Sport L494 Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day money-back guarantee 📦 Worldwide DHL, FedEx, UPS, TNT shipping ☎️ +44 203 943 9919 – Expert support Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover (JLR). All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for the specified vehicle model(s) and is not an OEM product.

Victorious Automotive · Range Rover Evoque · Interior Lighting Range Rover Evoque Additional Ambient Lighting Upgrade — Fiber Optic LED Interior Strip Kit Transform your Evoque's cabin atmosphere with a premium fiber optic LED band lighting system — delivering crisp, cool-white illumination along door panels and interior trim with a clean, factory-flush finish. Range Rover Evoque L538 Range Rover Evoque L551 Fiber Optic LED Interior Ambient Light 12000K Cool White 4W Low Draw Cree LED Chip Plug & Fit Door Panel Lighting 2400lm Output Overview The Range Rover Evoque occupies a unique space in the Land Rover lineup — compact enough for urban life, yet premium enough to demand a cabin that feels genuinely considered at every hour of the day. Whether you own the first-generation L538 or the refined L551, the factory ambient lighting spec often leaves enthusiasts wanting more depth, more presence, and more atmosphere once the sun goes down. This fiber optic LED ambient lighting kit is purpose-built to address exactly that. Using genuine Cree LED chip technology and a flexible fiber optic band format, the system layers soft, continuous illumination along your door panels and interior trim lines — creating a seamless glow that integrates naturally with the Evoque's interior architecture rather than looking like an afterthought. At 12000K colour temperature, the output reads as a clean, crisp cool white that complements the Evoque's contemporary design language without overpowering it. Each of the four included strips ships at one metre in length and carries its own dedicated light source, giving you independent control over placement and intensity across all four door panels. The result is a balanced, symmetrical lighting upgrade that elevates the Evoque cabin to a level that genuinely rivals far more expensive factory options — installed without the need for professional fitting or wiring specialists. What's Included 💡 Fiber Optic LED Strips × 4 1 metre each, individual light source per strip 🔌 Light Source Units × 4 Cree LED chip, 4W, 12000K per unit 📄 Installation Instructions Step-by-step printed fitting guide 🔧 Mounting Adhesive Pre-applied strip backing for clean fitment Product Highlights Genuine Cree LED chip technology for consistent, long-life output 12000K cool white colour temperature — sharp, premium cabin feel 2400 lumens total output across four strips Fiber optic band format for seamless, even illumination with no hotspots 4W total draw — negligible impact on vehicle battery and electrics Each strip ships at 1 metre — ideal for full door panel coverage Independent light source per strip for flexible installation routing Not EL (electroluminescent) wire — true LED fiber optic performance Lightweight 0.5kg kit — no structural modification required Compatible across multiple Range Rover and Land Rover variants Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–Present Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Classic MK1 1970–1996 Direct Fit Range Rover P38A MK2 1994–2002 Direct Fit Range Rover L322 MK3 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L461 2022–Present Verify Before Order Range Rover Vogue L460 2022–Present Verify Before Order Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 60–90 minutes  ·  No professional fitting required Gently remove door panel trim inserts or lower sill trim pieces to expose the routing channel. No permanent removal is necessary — light prying with a trim tool is sufficient on most Evoque variants. Clean the mounting surface thoroughly with an isopropyl alcohol wipe and allow to dry completely before applying the adhesive-backed fiber optic strips. This ensures a lasting bond. Route each fiber optic strip along the desired panel line — typically along the lower door card edge or accent trim groove — following the natural contour of the interior surface. Connect each strip's light source unit to a switched 12V feed, such as the courtesy light circuit or an existing interior lighting circuit, so the ambient lights activate with the cabin lighting. Tuck all wiring neatly behind trim panels using the existing cable routing channels and refit all trim pieces. Test each strip individually before final reassembly. Power on and verify uniform illumination across all four strips. Minor positional adjustments can be made within the first few minutes before the adhesive fully cures. ⚠ Note: Always disconnect the vehicle's negative battery terminal before working with interior wiring circuits. If you are unfamiliar with automotive electrics, we recommend having the wiring connection completed by a qualified auto electrician. The fiber optic strips themselves require no electrical connection and can be positioned independently of the light source units. Elevate Your Evoque Interior Browse the full collection of Range Rover Evoque interior upgrades at Victorious Automotive — curated specifically for owners who expect more from their cabin. Shop Evoque Accessories Shop Evoque L551 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes. Always verify fitment with your specific vehicle's VIN and build specification before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover · Interior Lighting Range Rover Additional Ambient Lighting Upgrade — Fiber Optic Door Panel Illumination Transform your Range Rover's interior atmosphere with precision-engineered fiber optic band lighting that wraps your door panels in a seamless, continuous glow — no harsh spots, no EL strips, just genuine ambient refinement. RR Classic MK1 P38A MK2 L322 MK3 L405 MK4 RR Sport 1970–2016+ Fiber Optic Door Panel Lighting Interior Atmosphere Direct Fit Not EL Light Overview The Range Rover has always set the benchmark for luxury SUV interiors — commanding, refined, and unmistakably premium. Whether you're driving a classic MK1, the iconic P38A, the sophisticated L322, a contemporary L405, or an RR Sport, the interior deserves lighting that matches the vehicle's standing. Factory ambient lighting, where fitted, is often limited in coverage and colour consistency — leaving door panels under-lit and the overall atmosphere short of what these vehicles are capable of. This fiber optic band ambient lighting kit fills that gap with precision. Unlike EL (electroluminescent) strips that can produce uneven glow and degrade quickly, genuine fiber optic bands distribute light uniformly and continuously along their entire length — no hot spots, no visible light sources, just a clean, elegant line of illumination that follows the contours of your door panel. Each of the four 1-metre bands comes paired with its own dedicated light source, making installation flexible and the end result consistent across all four doors. Fitting is straightforward for anyone comfortable removing door panel trim — the bands are routed behind the existing panel architecture and connected to a suitable 12V source. The result is a measurable step up in perceived interior quality: the kind of subtle, well-considered upgrade that Range Rover enthusiasts will appreciate immediately and notice every time they open a door after dark. What's Included 💡 4× Fiber Optic Bands 1 metre each — one per door panel 🔦 4× Dedicated Light Sources Individual unit per band for consistent output 📋 Installation Instructions Step-by-step fitting guide included Product Highlights Genuine fiber optic technology — not EL strip lighting Uniform, continuous glow along the full 1m band length Four individual light sources for consistent door-to-door output Covers all four door panels in a single kit Subtle, premium atmosphere — not garish or overloud Compatible with multiple Range Rover generations spanning 1970–present No visible hotspots or light source bleed-through Flexible band design routes easily behind door card trim Connects to standard 12V vehicle power — no specialist wiring Reversible installation — no permanent modification to factory trim Compatibility Model Generation / Code Years Fitment Range Rover Classic MK1 1970–1996 Direct Fit Range Rover P38A MK2 1994–2002 Direct Fit Range Rover L322 MK3 2002–2012 Direct Fit Range Rover Vogue L405 MK4 2012–2021 Direct Fit Range Rover Sport L320 / L494 2005–2022 Direct Fit Range Rover Sport L461 2022–2026 Verify Before Purchase Range Rover Vogue L460 2022–2026 Verify Before Purchase Range Rover Velar L560 2017–2024 Verify Before Purchase Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5–3 Hours  ·  Tools Required: Trim removal tools, panel clips, 12V power tap Remove each door card carefully using appropriate trim clips and plastic pry tools — avoid metal tools directly on the panel to prevent marking. Plan your routing path for each fiber optic band along the lower or mid-section of the door panel interior, following the natural contour lines of the trim. Position each light source unit in a concealed location within the door void — behind the armrest pocket or lower panel area works well on most Range Rover generations. Secure the fiber optic band along its intended route using the supplied adhesive or trim-safe tape, ensuring it lies flat and taut without kinks. Connect each light source to a suitable switched 12V feed — the interior door lamp circuit is the most commonly used tap point for a clean, ignition-controlled result. Refit the door card, test each panel before fully re-clipping, and adjust band positioning if any light bleed is visible at the panel edges. Repeat for all four doors, confirming consistent output and colour balance across the full set before completing the final fitment. ⚠ Note: Always disconnect the vehicle battery before accessing door wiring on vehicles with airbag-equipped door panels. On newer variants (L405, L494 and above), consult your vehicle's wiring diagram before tapping any low-current circuits. If in doubt, have a qualified auto electrician complete the connection work. Elevate Your Interior. Every Journey. Ambient lighting is one of the most impactful — and most underrated — interior upgrades available to Range Rover owners. This fiber optic kit delivers a factory-quality result at a fraction of the cost of a dealer-fitted solution. Browse our full Range Rover interior collection or speak with our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like guidance on compatibility for your specific model year. Shop Range Rover Interior Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover / Range Rover / Defender · Key Fob Accessories Premium Leather & Stainless Steel Key Fob Cover – Land Rover, Range Rover & Defender (2018–2024) Protect your key fob from peeling, cracking, and everyday damage with a tailored leather and stainless steel cover — purpose-built for modern Land Rover and Range Rover models from 2018 onwards. L405 L494 L460 L461 L663 Defender 2018–2024 Premium Leather Stainless Steel 3 Colour Options Direct Fit No Tools Required Overview From the Defender L663 to the Range Rover Vogue L460, every Land Rover produced since 2018 shares one common weak point — the OEM key fob. The standard plastic casing is prone to peeling, scuffing, and surface degradation over time, leaving an otherwise immaculate interior let down by a worn-looking key. It's a detail that Land Rover owners who take pride in their vehicles simply shouldn't have to accept. This key fob cover addresses the problem directly. Crafted from genuine high-quality leather and reinforced with a precision-formed stainless steel frame, it wraps your existing key fob in a layer of premium protection that's both functional and refined. The leather construction echoes the material language found inside the cabin itself, while the stainless steel adds structural integrity and a confident weight that lifts the feel of the key in your hand. Available in Black, Red, and Blue, the cover allows a degree of personalisation without compromising the understated character these vehicles are known for. Installation requires no tools and takes seconds — simply snap the cover over your existing key fob and the fit is secure, the finish is flush, and the electronics remain fully accessible and unobstructed. What's Included 🔑 Leather Key Fob Cover × 1 Premium leather & stainless steel construction, ready to fit 📦 Protective Packaging Securely packaged to arrive in perfect condition 📋 Fitment Guide Simple installation instructions included Product Highlights Defends against OEM plastic peeling and surface degradation Genuine leather exterior for a refined, premium feel Stainless steel frame adds durability and structural rigidity Full access to all buttons — no interference with key function Protects key electronics from knocks, scratches, and impacts Available in Black, Red, and Blue to suit your preference Tool-free installation — fits over existing key fob in seconds Compatible with five modern Land Rover platform codes Secure snap-fit design stays firmly in place during daily use Complements the interior trim quality of all compatible models Compatibility Model Code Years Fit Range Rover Vogue L405 2018–2021 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Vogue L460 2022–2024 Direct Fit Range Rover Sport L461 2022–2024 Direct Fit Defender 90 / 110 / 130 L663 2020–2024 Direct Fit Range Rover Velar L560 2018–2024 Verify Before Purchase Range Rover Evoque L551 2019–2024 Verify Before Purchase Discovery Sport L550 2018–2024 Not Compatible Installation Notes 🛠 Difficulty: Very Easy  ·  ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Tools Required: None Remove your Land Rover or Range Rover key fob from your pocket or bag and ensure it is clean and dry before fitting. Orient the leather cover so the button cut-outs align precisely with your key fob's existing buttons — take a moment to confirm correct orientation before proceeding. Begin at one end of the key fob and press the cover gently into position, working along the length until the stainless steel frame snaps securely around the casing. Press firmly around all edges to confirm a flush, secure fit. Test all buttons for full responsiveness and check the key fob signal operates normally before use. Your key fob cover is now fitted and ready. No adhesive, no tools, and no permanent modification to your key fob. ⚠ Compatibility Note: This cover is designed for the specific key fob style used across models L405, L494, L460, L461, and L663 from 2018 onwards. If you are unsure of your key fob style or model code, please contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. We strongly recommend verifying your model code prior to ordering. Elevate Every Detail The key fob is the first thing you touch every time you approach your vehicle. Make it worthy of what's waiting on the other side of the door. Free worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Defender Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of product fitment identification. Always verify compatibility with your specific vehicle and key fob variant before purchase.

Victorious Automotive · Mercedes C63 · Aerodynamics Carbon Fiber Rear Trunk Spoiler – Mercedes C63 W205 (2015–2017) Aggressive styling meets precision aerodynamics. OEM-fit carbon fiber engineering for the modern C63 enthusiast. W205 Sedan 2015–2017 3K Carbon Fiber 3M Adhesive Direct Fit Overview The Mercedes-AMG C63 W205 (2015–2017) demands visual presence that matches its performance pedigree. This carbon fiber rear trunk spoiler transforms the sedan's profile with an aggressive, purposeful stance while delivering measurable aerodynamic benefit at speed. Hand-laid 3K twill weave construction ensures premium finish quality and minimal weight penalty. The spoiler integrates seamlessly with the C63's factory proportions—no drilling, no permanent modifications. Engineered for direct fitment across all W205 sedan models, from the entry C180 through the full-fat AMG C63. Installation takes under an hour with the included 3M tape system. Clean substrate, position, press, and walk away. This is the defining visual upgrade for C63 owners who refuse compromise. What's Included 🎯 Carbon Fiber Spoiler Hand-laid 3K twill weave, UV-stable finish 🔧 3M Adhesive Tape Factory-grade bonding, weather-sealed 📋 Installation Guide Step-by-step instructions, surface prep tips ✓ Quality Assurance Pre-fitment inspected, packaged for safe arrival Product Highlights 3K Twill Weave Carbon Fiber — optimal strength-to-weight ratio OEM-Profile Design — factory proportions, no overhang Direct Fit W205 — no modifications, drilling, or customization 3M Industrial Adhesive — permanent, weather-sealed bonding Glossy UV-Stable Finish — maintains appearance in sun and rain Aerodynamic Engineering — reduces lift, improves stability at speed Tool-Free Installation — 45–60 minutes, standard equipment only Lightweight Construction — under 2 kg, negligible mass penalty All Sedan Models Compatible — C180, C200, C250, C300, C400, C63 AMG Removable Without Damage — can be uninstalled cleanly if needed Compatibility Model Body Style Years Fitment C180 W205 Sedan 2015–2017 Direct Fit C200 W205 Sedan 2015–2017 Direct Fit C250 W205 Sedan 2015–2017 Direct Fit C300 W205 Sedan 2015–2017 Direct Fit C400 W205 Sedan 2015–2017 Direct Fit C63 AMG W205 Sedan 2015–2017 Direct Fit C63 Coupé / Cabriolet W205 (C, A205) 2015–2017 Not Compatible Installation Difficulty: Beginner · Time: 45–60 Minutes Clean the Surface: Wash the trunk lid and boot area with warm soapy water. Dry completely with microfiber cloth. Wipe with isopropyl alcohol to remove all residue and oils. Position the Spoiler: Dry-fit the spoiler on the trunk. Use a level to ensure horizontal alignment. Mark the mounting points lightly with tape. Apply Adhesive: Remove backing from 3M tape strips. Firmly press tape to the back of the spoiler, following the provided template. Final Placement: Align the spoiler with your positioning marks. Apply downward pressure for 60 seconds to activate adhesive bond. Cure Time: Allow 24 hours before washing or heavy use. Adhesive reaches full strength after 7 days. Important: Ensure trunk lid surface is completely clean and dry before installation. Do not install in temperatures below 10°C or above 35°C. Professional installation recommended if unfamiliar with adhesive application. Own Your C63's True Character The trunk spoiler is where C63 attitude begins. Premium carbon, perfect fitment, zero compromise. Your build deserves nothing less. Add to Cart Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ Reviews 📦 Worldwide Shipping 🔄 30-Day Money-Back 📞 +44 203 943 9919 Victorious Automotive is not affiliated with or endorsed by Mercedes-Benz AG, AMG, or Daimler. All product names and logos are the property of their respective manufacturers. This product is designed for compatibility with OEM specifications and does not affect manufacturer warranties when installed correctly.

Premium Automotive · Mercedes-AMG · Aerodynamic Styling Carbon Fiber Rear Trunk Spoiler – W205 C63 AMG Coupe Aggressive aerodynamic styling and authentic carbon fiber construction for the 2015–2017 Mercedes-AMG C63 2-Door Coupe. W205 2015–2017 Carbon Fiber 3x3 Twill Weave Vacuum Molded Plug & Play Overview The Mercedes-AMG W205 C63 Coupe commands attention from every angle—and this carbon fiber rear trunk spoiler amplifies that aggressive stance. Built with authentic vacuum-molded carbon fiber, it delivers the visual presence of factory AMG performance while reducing unsprung weight at the rear axle. Engineered for direct fitment on 2015–2017 C63 2-door models, this spoiler combines functional aerodynamic improvement with the unmistakable visual signature of genuine carbon. The 3x3 twill weave pattern catches light and shadow, creating depth and dimension that synthetic alternatives simply cannot replicate. At just 0.7 kg, it's a weight-conscious upgrade that does more than look the part. Installation is straightforward thanks to included 3M adhesive tape. No drilling, no permanent modifications—only reversible styling and aerodynamic gain. Whether you're track-focused or street-oriented, this spoiler signals serious intent and genuine engineering. What's Included 🪨 Carbon Fiber Spoiler Vacuum molded, 3x3 twill pattern 📌 3M Adhesive Tape Industrial-grade bonding system Product Highlights Genuine carbon fiber construction via vacuum molding Lightweight 0.7 kg, minimal unsprung weight 3x3 twill weave for authentic appearance Improves rear aerodynamic balance and downforce Reduces lift at highway and track speeds Direct fit—no modifications required Professional-grade 3M adhesive tape included Sleek matte black finish 125 x 30 x 4 cm dimensions Reversible installation, no drilling Compatibility Model Years Body Style Status Mercedes-AMG C63 Coupe 2015–2017 W205 2-Door Direct Fit Mercedes-AMG C63 Sedan 2015–2017 W205 4-Door Not Compatible Mercedes-AMG C63 Cabriolet 2015–2017 W205 Convertible Not Compatible Mercedes-AMG C43 / C450 2016–2017 W205 Coupe Not Compatible Installation Difficulty: Beginner | Time: 20–30 minutes Preparation: Park on level ground. Clean the rear trunk lid and surrounding area thoroughly with isopropyl alcohol and allow to dry completely. Remove protective release film from 3M tape. Alignment: Dry-fit the spoiler on the trunk. Center it horizontally and position vertically according to personal preference. Mark alignment points lightly with tape or dry-erase marker. Bonding: Carefully peel back one section of the 3M tape backing and press the spoiler firmly into position. Work methodically across the entire contact surface to ensure uniform adhesion. Curing: Allow 24 hours for adhesive curing before exposing the vehicle to extreme temperatures, car washes, or highway driving. Verification: Inspect all edges and corners after 24 hours to confirm solid bond. No additional fasteners or drilling required. Important: Professional installation is strongly recommended to guarantee proper alignment and finish. Poor surface preparation or misalignment can compromise both aesthetics and adhesion longevity. If unfamiliar with carbon fiber handling, defer to a certified installer. Specifications Specification Detail Material Carbon Fiber (Vacuum Molded) Finish Matte Black, 3x3 Twill Weave Weight (Net) 0.7 kg Weight (Packaged) 1.8 kg Product Dimensions 125 × 30 × 4 cm (L × W × H) Packing Dimensions 160 × 50 × 25 cm Installation Method 3M Adhesive Tape (No Drilling) Fit Type Direct Fit – W205 2-Door Coupe Only Ready to Elevate Your C63? Carbon fiber aerodynamic styling isn't just about looks—it's about engineering intent, weight efficiency, and the confidence that comes with genuine craftsmanship. This spoiler delivers all three. Shop Now Use code 22GET20 for 20% off any 2 items 4.9 / 5 · 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, AMG, Daimler AG, or their subsidiaries. All product names, logos, and brands are property of their respective owners. Product descriptions are for reference only and do not constitute endorsement or sponsorship. Always verify compatibility before purchase.

Product Description: Upgrade your vehicle with these high-quality carbon fiber mirror caps, designed to fit seamlessly and enhance both appearance and performance. With a sleek, modern aesthetic, these mirrors offer durability and style. Product Highlights: Glossy carbon fiber finish for a contemporary look Lightweight and sturdy construction Easy installation for a perfect fit Boosts aerodynamics and reduces drag Product Specifications: Material: Premium carbon fiber Fitment: Specifically crafted for the Model X Finish: Glossy carbon fiber texture Package Includes: Two carbon fiber mirror caps Notes: Check vehicle compatibility before purchase. Professional installation is recommended for best results.

Tesla · Model S & Model X · Interior Trim Rear Climate Carbon Trim for Tesla Model S & Model X Premium carbon fibre rear vent covers that elevate your cabin's interior aesthetic with effortless, precision-fit installation. Model S 2016–2019 Model X 2016–2019 Carbon Fibre Look Pre-Applied Adhesive Two-Piece Set Overview Tesla Model S and Model X owners demand refinement in every detail. Your vehicle's rear climate control vents deserve the same attention to finish as the rest of your cabin—and these carbon fibre style trim covers deliver exactly that. Engineered for seamless integration, they transform a functional component into a design statement. Crafted from high-quality TPU with a sleek carbon fibre finish, these covers are laser-cut to precision tolerances. Installation takes minutes thanks to pre-applied adhesive, and the result is a sophisticated, cohesive look that complements modern minimalist interiors. Whether you're refining an existing aesthetic or completing a bespoke cabin upgrade, this two-piece set is the finishing touch your Model S or Model X deserves. What's Included 📦 Rear Climate Carbon Trim Set Two precision-cut pieces, ready to install ✦ Pre-Applied Adhesive No extra tools or supplies needed Product Highlights High-quality TPU construction for durability and longevity Authentic carbon fibre style finish Precision laser-cut for perfect fit every time Pre-applied 3M adhesive—no mess, no guesswork Two-piece rear vent cover set included Non-intrusive design complements original cabin lines Effortless installation in under 10 minutes Compatible with 2016–2019 Model S and Model X Enhances interior sophistication and visual depth Minimal maintenance—wipe clean with soft cloth Compatibility Model Years Status Tesla Model S 2016–2019 Direct Fit Tesla Model X 2016–2019 Direct Fit Tesla Model S 2020+ Not Compatible Tesla Model X 2020+ Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Ensure the rear climate vent surfaces are clean and dry. Use a microfibre cloth and mild isopropyl alcohol if needed. Allow to air dry completely. Carefully peel the backing from the first carbon trim piece, exposing the adhesive. Align the trim with the rear vent opening, then press firmly from the centre outward to avoid air bubbles. Repeat for the second piece on the opposite side. Allow 24 hours for the adhesive to cure fully before opening rear vents or adjusting climate controls. Important: Do not disturb the trim for 24 hours after installation. Ensure surfaces are completely clean and dry before application for optimal adhesion. Elevate Your Cabin Transform your rear climate vents from functional to refined. These carbon fibre trim pieces are the detail-conscious upgrade your Model S or Model X has been waiting for—premium finish, seamless fit, simple installation. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide Shipping via DHL, FedEx, UPS +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc. or any of its subsidiaries. Tesla is a registered trademark of Tesla, Inc. All references to Tesla vehicle models are for compatibility and identification purposes only.

Premium Tesla Accessories Wireless Car Charger for Tesla Model 3 Fast, hands-free 10W wireless charging seamlessly integrated into your Model 3 centre console. Model 3 2017–2024 Wireless Charging 10W Dual Mode Stainless Steel Overview The Tesla Model 3 is engineered for precision and efficiency, and your interior deserves accessories that match that standard. This Wireless Car Charger integrates seamlessly into your centre console, delivering professional-grade charging without the clutter of cables or the distraction of hand-held mounting. With 10W dual-mode output, intelligent Foreign Object Detection, and automatic temperature management, this charger keeps your smartphone powered throughout your journey. The stainless steel core with premium thermoplastic silicone coating ensures durability and a refined aesthetic that complements Model 3 interiors perfectly. Whether you're commuting or road-tripping, this charger delivers reliable, fast power to any compatible Qi-enabled device—freeing your attention for the road ahead. What's Included ⚡ Wireless Phone Charger 10W dual-mode unit with FOD & temperature control 📍 Mounting Tape Pre-cut adhesive for secure centre console installation 🔌 USB Separators (×2) Organise cable management and routing 📖 User Manual Installation, troubleshooting, and safety guidelines Product Highlights 10W wireless dual-mode output for rapid, versatile charging Intelligent Foreign Object Detection (FOD) safeguards your device Real-time LED charging status indicator Automatic thermal management prevents overheating Stainless steel core for durability and premium finish Thermoplastic silicone rubber coating ensures enhanced stability Perfect fit for Model 3 centre console cavity Hands-free operation for safer driving Compatible with all Qi-enabled smartphones No metallic objects or interference required Compatibility & Fitment Model Year Range Fitment Tesla Model 3 2017–2024 Direct Fit Tesla Model 3 Performance 2017–2024 Direct Fit Tesla Model Y 2020–2024 Not Compatible Tesla Model S 2015–2024 Not Compatible Installation Guide Installation Overview Difficulty: Easy | Time Required: 10–15 minutes | Tools: None (tape mounting) Power off your Tesla and open the centre console lid carefully. Clean the console surface with a dry, lint-free cloth to ensure tape adhesion. Remove the backing from the pre-cut mounting tape. Align the Wireless Car Charger with the console cavity and press firmly for 30 seconds. Route the USB cable through the console to your 12V or USB power source. Use the included USB separators to organise cable runs neatly. Allow the adhesive to set for 2 hours before placing devices on the charger. Place your Qi-enabled phone on the charger—the LED will confirm charging status. Important: Do not place metallic objects (keys, coins, metal phone cases) on the charging pad during use. This may trigger Foreign Object Detection and interrupt charging. Ensure the charger is installed on a clean, dry surface for optimal adhesion. Specification Sheet Specification Detail Output Power 10W per charging side (20W total) Charging Modes Dual-mode wireless fast charging Core Material Stainless steel Surface Coating Thermoplastic silicone rubber Foreign Object Detection Yes (FOD intelligent protection) Temperature Control Automatic thermal management Status Indicator LED charging status light Vehicle Fit Tesla Model 3 centre console (2017–2024) Device Compatibility All Qi-enabled smartphones Installation Tape-mount (no drilling required) Complete Your Model 3 Interior Keep your phone charged, your hands free, and your attention on the road. Designed for Tesla owners who demand clean lines and seamless integration. Shop Wireless Charger Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ verified reviews 🛡️ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS 📞 UK Support +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla Inc., Elon Musk, or any Tesla subsidiary. Tesla and Model 3 are registered trademarks of Tesla Inc. All references are for fitment and compatibility purposes only. Product images and descriptions are property of Victorious Automotive. Always verify fitment with your vehicle's year, trim, and region before purchase.

Exterior · Tesla Model 3 · Performance Aerodynamics Rear Spoiler for Tesla Model 3 2017–2019 Premium carbon fiber spoiler engineered to enhance aerodynamic performance and aggressive stance. Model 3 2017–2019 Carbon Fiber Aerodynamic Lightweight Direct Fit Overview The Tesla Model 3 (2017–2019) is a precision machine built for efficiency and performance. This rear spoiler transforms your Model 3's visual presence while delivering measurable aerodynamic benefits. Engineered from aerospace-grade carbon fiber, it reduces drag at highway speeds and improves downforce, complementing Tesla's electric performance DNA. Unlike generic aftermarket spoilers, this design integrates seamlessly with the Model 3's clean lines and integrated rear architecture. The carbon weave finish delivers an intentional, factory-quality aesthetic—no retrofit awkwardness. At just 2 kg, the weight penalty is negligible, ensuring zero impact on your vehicle's legendary efficiency. Whether you're tracking your Model 3 or simply elevating its visual presence on urban streets, this spoiler balances form and function. It's the detail that separates enthusiasts from standard owners. What's Included 📦 1× Carbon Fiber Rear Spoiler Pre-finished, ready to mount 🔧 Installation Hardware Kit Stainless brackets, fasteners, sealant 📋 Step-by-Step Guide Detailed mounting instructions 🛡️ 30-Day Guarantee Full refund if not satisfied Product Highlights Custom-fit design for 2017–2019 Model 3—zero modifications required Premium carbon fiber construction—lightweight and durable Aerospace-grade resin ensures UV stability and long-term finish Improves high-speed aerodynamics and reduces drag coefficient Enhances visual aggression while maintaining OEM proportions Factory-quality carbon weave finish—no paint overspray needed Includes pre-drilled mounting points with stainless hardware Complete with sealant and weatherproofing materials Weighs just 2 kg—zero performance penalty 30-day money-back guarantee—risk-free upgrade Technical Specifications Specification Detail Model Name M3-EX28L Vehicle Fitment Tesla Model 3 (2017, 2018, 2019) Material Carbon Fiber (3K Twill Weave) Weight 2.0 kg (4.4 lbs) Dimensions (L × W × H) 48″ × 9″ × 5″ (1219 × 229 × 127 mm) Placement Vehicle Tail / Rear Hatch Installation Time 45–90 minutes Hardware Included Yes Professional Install Recommended Recommended Compatibility Chart Model Year Body Style Compatibility 2017 Model 3 Sedan Direct Fit 2018 Model 3 Sedan Direct Fit 2019 Model 3 Sedan Direct Fit 2020+ Model 3 Sedan (Revised Rear) Not Compatible Model 3 Performance All Years 2017–2019 Direct Fit Model 3 Long Range / Standard All Years 2017–2019 Direct Fit Installation Guide Difficulty Level: Intermediate | Time: 45–90 Minutes Prepare Your Vehicle — Park on a level surface, engage parking brake. Open rear hatch fully and allow the electronic struts to hold it open. Remove Old Trim (If Applicable) — Carefully pry away any existing rear trim fasteners using a plastic trim tool. Avoid damaging the painted surface. Clean the Mounting Surface — Use isopropyl alcohol to degrease the entire rear hatch surface where the spoiler will mount. Allow 5 minutes to dry completely. Apply Sealant — Lay a thin, even bead of the provided weatherproofing sealant along the pre-drilled mounting points on the spoiler's underside. Position the Spoiler — Align the spoiler mounting holes with the prepared hatch mounting points. Use a level to verify proper alignment. Secure Hardware — Insert stainless fasteners and tighten evenly in a crisscross pattern. Do not over-tighten—hand-tight plus ¼ turn is sufficient. Cure and Test — Allow sealant to set for 24 hours before exposing the vehicle to wet conditions. Test wind loads by gently pressing the spoiler at full hatch extension. Safety Note: Professional installation is recommended to ensure proper alignment, weatherproofing, and to avoid damage to the hatch or electrical components. Improper installation may void your 30-day guarantee. Elevate Your Model 3 Carbon fiber isn't just about looks—it's about precision engineering applied to every detail. This spoiler proves that the smallest upgrades deliver the biggest impact on your vehicle's presence and performance. Shop Rear Spoiler Now Use code 22GET20 for 20% off when you purchase any 2 items. 4.9/5 · 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS 30-day money-back guarantee Contact: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Tesla, Inc., or any official Tesla subsidiary. All product names and vehicle designations are used for identification purposes only. Installation of aftermarket components may affect vehicle warranty coverage—please review your Tesla warranty terms or contact your service center before installation. This product is designed for the 2017–2019 Tesla Model 3 sedan only and is not compatible with other Tesla models or body styles.

Victorious · Tesla Model 3/S/X · Interior Protection Dashboard GPS Screen Protective TPU Film for Tesla Model 3, S & X Premium anti-scratch protection with 99% optical clarity—keep your touchscreen pristine and responsive. Model 3 Model S Model X Premium TPU Material Bubble-Free Install 4H Hardness Rating Overview Tesla Model 3, S, and X owners demand the best protection for their vehicle's most critical interface—the dashboard GPS and touchscreen display. Your vehicle's tech is an investment worth protecting from daily wear, sweat marks, scratches, and UV exposure. This premium TPU protective film delivers automotive-grade transparency and durability without compromising the crystal-clear visual experience you rely on. Engineered with 0.25 mm of precision-cut protective material, this film applies perfectly to your specific Tesla model using electrostatic adsorption—no adhesive residue, no bubbles, no permanent bond. The 4H hardness rating resists keys, fingernails, and sharp objects that would otherwise cloud your screen over months of use. At 99% light transmittance, colours remain vivid, touch response remains instant, and your display stays looking factory-fresh. Whether you're protecting against road dust, aggressive cleaning, or accidental contact, this film quietly does its job. Heat-resistant to 130°C and rated for temperatures from -10°C to 80°C, it handles everything from arctic winters to sun-baked summer dashboards without warping, yellowing, or peeling. What's Included 🛡️ Protective Film (1x) Pre-cut for perfect fit 🧹 Cleaning Kit Microfibre cloth included 📋 Application Guide Step-by-step instructions Product Highlights Premium PET construction—electrostatic adhesion, no mess, no residue 4H hardness rating—resists scratches, keys, and daily contact marks 99% light transmittance—crystal-clear display visibility and colour accuracy Ultra-thin 0.25 mm profile—doesn't interfere with screen responsiveness or touch calibration Heat resistance up to 130°C—survives direct sunlight and thermal stress without warping Temperature range -10°C to 80°C—stable in all climates and seasons Bubble-free application—electrostatic adsorption prevents air pockets Model-specific fit—precision cut for Tesla Model 3, S, and X interiors Anti-glare coating option—reduces reflections for safer driving visibility Reusable and removable—no permanent adhesive, can be repositioned during install Compatibility Tesla Model Year Range Compatibility Model 3 (All Variants) 2017–Present Direct Fit Model S (Refresh & Pre-Refresh) 2012–Present Direct Fit Model X (All Generations) 2015–Present Direct Fit Model Y 2020–Present Not Compatible Installation Notes Installation Difficulty: Easy | Time Required: 5–10 Minutes Power off your vehicle and allow the dashboard to cool for 5 minutes. Use the microfibre cloth provided to clean the GPS screen surface thoroughly. Remove any dust, fingerprints, or residue. Dry the screen completely with a lint-free cloth. Carefully align the pre-cut protective film with your screen edges. Start at the top centre and work downward. Gently press the film onto the screen surface. The electrostatic adhesion will secure it without bubbles. Use the squeegee or soft cloth to smooth out any air pockets, working from centre outward. Allow 2 hours for full adhesion before using the touchscreen. Note: If bubbles appear during installation, carefully lift the film and re-apply. Do not use excessive pressure, as this may affect touch sensitivity calibration. Ready to Protect Your Display? Keep your Tesla's touchscreen looking showroom-fresh. This premium protective film is engineered for clarity, durability, and perfect fitment—install it once and forget about screen damage forever. Add to Cart 4.9/5 – 12,300+ Reviews 🚚 Worldwide Shipping ✅ 30-Day Money-Back Guarantee Use code 22GET20 for 20% off any 2 items Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc. or any official Tesla subsidiary. All product names, logos, and brands are the property of their respective owners. This protective film is designed as an aftermarket accessory and does not constitute an official Tesla product or modification.

Tesla · Model S / X · Interior Carbon Fiber Navigation Frame – Tesla Model S & X Premium real carbon fiber trim that elevates your centre console with bold, modern styling. Model S / X 2014–2019 Real Carbon Fiber Easy Install Overview The Tesla Model S and Model X have become icons of electric performance and luxury. Their minimalist interiors demand equally refined accessories that enhance without compromising the original design language. This navigation frame is crafted from genuine carbon fibre and engineered specifically for 2014–2019 Model S and Model X vehicles. It frames your centre touchscreen with unmistakable carbon weave texture, adding depth, dimension, and visual interest to an otherwise flat dash. The frame is pre-cut to fit precisely, requiring only clean application via industrial-strength double-sided adhesive tape. If you value interior detail and want your Tesla to reflect the same precision engineering as its powertrain, this is the upgrade that delivers. The carbon weave catches light beautifully and complements both minimalist and personalized cabin aesthetics. What's Included 🎯 Carbon Fibre Frame Precision-cut, pre-formatted for direct fit 📦 Adhesive Backing Industrial double-sided tape pre-applied 📖 Fitment Guide Step-by-step installation instructions Product Highlights Genuine carbon fibre weave – not plastic or printed vinyl Precision-cut for 2014–2019 Model S & X Pre-applied industrial adhesive for hassle-free fitment Adds premium visual depth to centre console Minimal tools required – no drilling or modifications Complements OEM interior design language Durable finish resists fingerprints and UV fading Lightweight – no impact on vehicle dynamics Professional appearance suitable for any interior trim colour 30-day money-back guarantee Compatibility Model Year Range Fit Status Tesla Model S 2014–2019 Direct Fit Tesla Model X 2014–2019 Direct Fit Tesla Model S 2020+ Not Compatible Tesla Model X 2020+ Not Compatible Model 3 / Y All years Not Compatible Always verify your vehicle year and interior layout before ordering. If you're unsure, contact our team: +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Difficulty: Easy | Time: 15–20 minutes Power off the vehicle and allow the interior to cool to room temperature. Gently clean the centre console area around your navigation screen with isopropyl alcohol. Remove all dust, oils, and residue. Allow to dry completely (2–3 minutes). Carefully peel back the protective film from the adhesive backing on the carbon fibre frame. Position the frame around the navigation screen, ensuring all edges align flush with the dashboard contours. Press firmly from the centre outward, working air bubbles toward the edges. Apply steady pressure for 30 seconds to ensure full adhesion. Allow the adhesive to cure for 24 hours before using the touchscreen or adjusting the frame. Note: Do not force the frame into position if it doesn't sit flush. Reposition and try again. The double-sided tape provides excellent hold once properly applied, but cannot be repositioned repeatedly without losing adhesive strength. Ready to Transform Your Model S or X? This carbon fibre navigation frame is the finishing touch your Tesla deserves. Precision-engineered, premium materials, and installed in under 20 minutes. Your interior will thank you. View in Shop Use code 22GET20 to save 20% on any 2 items. ⭐ 4.9/5 stars ✓ 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS ↩️ 30-day money-back Victorious Automotive is not affiliated with Tesla Inc., Elon Musk, or any Tesla subsidiaries. Tesla is a registered trademark of Tesla Inc. This product is an aftermarket accessory designed for compatibility with specified Tesla models. Always consult your vehicle manual and verify fitment before installation.

Tesla · Model X & S · Interior Accessories Tesla Model X & S Central Cup Holder Box — Premium Center Console Organizer Transform your Tesla's center console into an organized, clutter-free storage hub with this precision-engineered organizer tray. Model X Model S 2016–2019 Durable Plastic Easy Install Overview If you own a Tesla Model X or Model S, you know how quickly your center console can become cluttered with loose items, cables, and personal belongings. The standard cup holder setup leaves little room for thoughtful storage, and your dashboard loses its premium feel when items are scattered about. Our Central Cup Holder Box is engineered specifically for the Model X and Model S interior layout. This organizer tray fits seamlessly into your center console, providing dedicated compartments and additional storage capacity without compromising the factory design aesthetic. The sleek black finish matches your vehicle's minimalist interior perfectly. Built from durable, temperature-resistant plastic and certified to ISO9001 standards, this organizer keeps your essentials—coins, cards, small chargers, and accessories—neatly contained and within reach. Installation is tool-free and reversible, taking just minutes to fit into place. What's Included 📦 Central Cup Holder Box 1x organizer tray Product Highlights Direct fit for Tesla Model X (all years 2016–2019) Direct fit for Tesla Model S (all years 2016–2019) Durable, temperature-resistant plastic construction Multiple compartments for organized storage ISO9001 certified manufacturing Black finish integrates seamlessly with interior Tool-free installation and removal Lightweight at 200g—no added bulk Compact 30 × 20 × 10 cm dimensions Keeps center console clutter-free and premium Compatibility Model Year Range Compatibility Tesla Model X 2016–2019 Direct Fit Tesla Model S 2016–2019 Direct Fit Tesla Model X 2020+ Not Compatible Tesla Model S 2020+ Not Compatible Important: Please verify your vehicle's production year before purchase. Models produced from 2020 onwards feature a redesigned center console with different dimensions and layout. Installation Notes Difficulty: Easy | Time: 5 minutes Remove any items currently in your center console cup holder area. Position the organizer tray into the center console cavity, aligning the edges with the surrounding trim. Gently press down until the organizer sits flush and secure. Test by adding light items to ensure stability and fit. Arrange your daily essentials in the dedicated compartments. Note: The organizer is not adhered to the console; it rests securely by gravity and friction. If you remove it, ensure you clean both the tray and console surface to maintain a secure, rattle-free fit. Avoid placing heavy or sharp items in the compartments, as they may warp the plastic over time. Shop with Confidence We stand behind every product with a 30-day money-back guarantee. If this organizer doesn't meet your expectations, we'll refund you in full. Thousands of Tesla owners trust Victorious Automotive for premium interior upgrades. View More Tesla Accessories Use discount code 22GET20 for 20% off any 2 items in your order. ⭐ 4.9/5 stars – 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 Expert support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Tesla, Inc. or Tesla Motors. All product names, logos, and brands are property of their respective owners. This product is an aftermarket accessory designed for compatibility with the vehicles listed above.

Victorious · Tesla Model 3 · Interior Storage Tidying Seat Gap Storage Box & Center Console Organizer for Tesla Model 3 Keep essentials within reach. Premium ABS storage fits seamlessly into your Model 3's center console and armrest cavity. Model 3 2017–2018 ABS Plastic Adhesive Installation 43cm Length Overview The Tesla Model 3 is a driver's car—minimal, purposeful, and refined. But that minimalism can mean lost coins, keys, and small items. This Tidying Seat Gap Box fills that gap literally and functionally, sitting flush in your center console or armrest cavity where clutter naturally gathers. Engineered from durable ABS plastic and finished in matte black, this organizer tray blends seamlessly into any Model 3 interior. At 43cm long and just 10cm tall, it maximizes dead space without interfering with your driving experience or door operation. Installation is adhesive-backed and reversible—no drilling, no permanent modification. Whether you're storing sunglasses, parking receipts, charging cables, or the small items that migrate under seats, this storage solution transforms wasted cavity space into organized, accessible storage. ISO9001 certified manufacturing ensures consistent quality across every unit. What's Included 📦 Tidying Storage Box 43cm × 15cm × 10cm ABS tray with adhesive backing 🔧 Pre-Applied Adhesive Tape Automotive-grade mounting system; clean surface for best adhesion 📋 Installation Guide Step-by-step instructions for proper placement and surface prep Product Highlights Direct fit for Tesla Model 3 (2017–2018 model years) Durable ABS plastic construction with premium black finish Adhesive-backed installation—no tools or drilling required Fits center console, armrest, or seat gap cavity seamlessly 43cm length maximizes available storage without bulk Lightweight at just 100g—imperceptible weight addition ISO9001 quality certified manufacturing (Model LLK2380) Removable design—adhesive can be carefully peeled without damage Sleek matte black complements Model 3 minimalist aesthetic Keeps small items organized and within arm's reach while driving Compatibility & Fitment Tesla Model 3 Year Fitment Status 2017–2018 Direct Fit 2019–2024 (Redesigned) Not Compatible Model Y Not Compatible Model S / X Not Compatible Note: This storage box is engineered exclusively for 2017–2018 Tesla Model 3. Later generations and other Tesla models have different center console geometry and are not compatible. Please confirm your Model 3 year before purchase. Installation Guide Difficulty: Easy | Time: 5 minutes Clean the surface: Use a microfiber cloth and isopropyl alcohol to thoroughly clean the center console or armrest cavity where the box will sit. Allow 2–3 minutes for complete drying. Peel backing tape: Carefully remove the adhesive backing from the bottom of the storage box. Do this slowly to avoid tangling. Position precisely: Align the box in your chosen cavity (center console or armrest gap). Ensure it sits flush and level. Press firmly: Apply steady downward pressure across the entire length of the box for 30 seconds. Use your palm or a soft cloth to avoid fingerprints. Wait before use: Allow the adhesive to cure for 1 hour before placing items inside. Full adhesion develops over 24 hours. Important: Surface cleanliness is critical. Dust, debris, or residue will prevent proper adhesion and may cause the box to shift or fall during vehicle operation. Do not skip the cleaning step. Why Choose This Storage Solution Tesla Model 3 owners appreciate intentional design and functional minimalism. This storage box respects that philosophy—it doesn't add visual clutter or complexity, it simply reclaims dead space that would otherwise collect lint and lost items. The adhesive installation is reversible, so you can remove it cleanly if needed. And at under £20, it's a modest investment in keeping your cabin organized and your essentials accessible. Perfect for daily commuters, delivery drivers, or anyone who wants their Model 3's interior as organized as its software. Ready to Organize Your Model 3? Reclaim your center console. Keep coins, cards, and cables in one compact, accessible tray. 30-day money-back guarantee—no questions asked if you're not satisfied. Add to Cart Use code 22GET20 for 20% off when you buy 2+ items. 4.9★ 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS, TNT 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with Tesla, Inc., or any official Tesla entity. Tesla and Model 3 are registered trademarks of Tesla, Inc. Product compatibility is verified at time of listing but vehicle specifications vary by production date and region. Always confirm year and model before purchase. Improper installation may void vehicle warranty—consult your Tesla service centre if unsure. ```

Tesla · Model 3 · Interior Protection Carbon Fiber Door Sill Strips for Tesla Model 3 Premium protective interior trim that combines striking carbon fiber aesthetics with lasting durability and scratch resistance. Model 3 Carbon Fiber TPU Material Front Door Protection 2-Piece Set Overview Your Tesla Model 3 deserves interior details that match its modern design language. These Carbon Fiber Door Sill Strips elevate the cabin aesthetic while delivering the practical protection your door entries need against scuffs, scratches, and daily wear. Engineered from premium thermoplastic polyurethane (TPU), these sills combine visual impact with real-world durability. The authentic carbon fiber finish complements the Model 3's minimalist interior, adding a layer of sophistication to every entry and exit. A two-piece front door set designed for seamless fitment, these sills are engineered to absorb impact and protect the vulnerable transition zone where footwear meets trim. Easy installation means you'll be enjoying the upgrade within minutes. What's Included ✓ 2× Carbon Fiber Door Sill Strips Left and right front door protection 📋 Installation Guide Step-by-step setup instructions Product Highlights Authentic carbon fiber finish for modern interior aesthetic High-grade TPU construction resists deformation and degradation Two-piece design covers both front door sill areas Superior scratch and scuff resistance through daily use Easy installation with perfect OEM-style fitment Lightweight yet durable protective barrier Complements Model 3's minimalist cabin design Chemical-resistant material maintains appearance over time Anti-slip surface prevents footwear marking Long-term durability with zero maintenance required Compatibility Tesla Model 3 Variant Compatibility Model 3 Standard Range (2017–2024) Direct Fit Model 3 Long Range (2017–2024) Direct Fit Model 3 Performance (2017–2024) Direct Fit Model 3 Highland (2024+) Direct Fit Installation Difficulty: Easy | Time: 10–15 minutes Clean the door sill area with a microfiber cloth to remove dust and debris. Dry completely to ensure optimal adhesive contact. Remove the protective backing from the first sill strip. Align the strip carefully with the door sill edge, starting from the center. Press firmly across the entire length, working out any air bubbles. Repeat steps 3–5 for the second sill strip on the opposite door. Allow 24 hours for the adhesive to fully cure before regular use. Note: For best results, install in ambient temperatures above 15°C. Ensure the adhesive surface is completely clean and dry. Do not allow passengers to step on the sills for 24 hours after installation. Ready to Protect Your Model 3 Transform your Tesla's interior with premium carbon fiber door sills that deliver both protection and presence. Order today and enjoy free worldwide shipping. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars on 12,300+ reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS shipping Call +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Tesla, Inc., or any official Tesla subsidiary. All product names, logos, and brands are the property of their respective owners. Product fitment and compatibility are provided for reference only; please verify fitment with your specific vehicle before purchase.

Tesla · Model S · Mirror Covers Carbon Fiber Mirror Covers for Tesla Model S 60/70/P85/P90D Premium dry carbon fiber add-on mirror caps that elevate your Model S exterior with aggressive, contemporary styling. Model S (2014+) Dry Carbon Add-On Design Gloss & Matte Double-Sided Tape Overview The Tesla Model S has redefined performance saloon expectations since 2014. Clean, purposeful design defines the platform—but your mirror caps are prime real estate for a bolder aesthetic. These carbon fiber mirror covers transform those functional panels into statement pieces, delivering a finish that's both refined and visually commanding. Engineered from premium dry carbon fiber, these add-on covers feature authentic weave visibility and ultra-smooth surfaces in your choice of gloss or matte black. The design sits flush with factory geometry, requiring only double-sided adhesive tape for a permanent, tool-free installation. No drilling. No cutting. Just precision fit and timeless carbon texture. Whether you're running a 60, 70, P85, or P90D, this upgrade unifies your Model S with a cohesive, modern presence—proof that the smallest details drive the biggest impression. What's Included 🎨 Carbon Fiber Mirror Covers Pair of dry carbon mirror caps (left and right) 🔧 Double-Sided Adhesive Tape Pre-applied for secure, permanent bonding 📦 Carton Box Packaging Protective shipping enclosure 📋 Installation Guide Step-by-step application instructions Product Highlights Authentic Dry Carbon Weave – Premium finish with visible carbon texture, not painted plastic. Two Finish Options – Select gloss black for reflective depth or matte black for stealth elegance. Add-On Design – Overlays existing mirrors; no factory parts removal required. Precision Fit – Factory-matched geometry ensures seamless integration with your Model S silhouette. Tool-Free Installation – Double-sided tape adhesive system; ready in minutes. Lightweight Construction – 1kg total weight eliminates any handling or suspension impact. Weather-Resistant – Durable carbon fiber resists UV, moisture, and thermal cycling. Non-Invasive – Fully reversible; remove without damage to original paint or trim. OEM Appearance – Integrates seamlessly with factory design language and proportions. Global Fitment – Compatible with all 2014+ Model S variants (60, 70, P85, P90D). Compatibility Tesla Model S Variant Fitment Status Model S 60 (2014+) Direct Fit Model S 70 (2014+) Direct Fit Model S P85 (2014+) Direct Fit Model S P90D (2014+) Direct Fit Model S 90D (2015+) Direct Fit Model S Plaid (2021+) Verify Fitment Installation Notes Difficulty Level: Beginner | Time: 15–20 minutes Clean Mirror Surfaces – Use a microfiber cloth and isopropyl alcohol to remove dust, oils, and residue from both mirror caps. Let dry completely (5 minutes). Test Fit – Hold each carbon cover against its corresponding mirror without pressing. Confirm alignment and symmetry. Apply Adhesive Tape – Peel backing from pre-applied double-sided tape on the cover. Press firmly onto the mirror, starting from the center and working outward to eliminate air bubbles. Hold Under Pressure – Apply steady, even pressure for 60 seconds per cover to ensure full adhesion. Cure Time – Allow 24 hours of rest before exposing the covers to water, high-speed driving, or car wash environments. Important: Do not wash your Model S for at least 24 hours after installation. The adhesive requires full cure time to reach maximum bond strength. Avoid clay bar treatments or aggressive polishing within 48 hours. Ready to Elevate Your Model S? Carbon fiber mirror covers are the perfect entry point into premium exterior customization—refined, impactful, and entirely reversible. Your Model S deserves details that match its performance pedigree. Shop Carbon Mirror Covers Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping ✓ 4.9/5 Stars from 12,300+ reviews Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Tesla, Inc., or any official Tesla partner. All product names and images are used for reference purposes only. Tesla is a registered trademark of Tesla, Inc. This product is an aftermarket accessory and is not endorsed by Tesla.

Victorious · Tesla Model 3 · Interior Protection Matte Central Dashboard Cover for Tesla Model 3 Premium TPU protection with a refined matte finish—designed for 2017–2019 Model 3 owners who demand both style and durability. T3 2017–2019 TPU Material Matte Finish Laser-Cut Overview Your Tesla Model 3's central dashboard is one of the most visible and frequently touched surfaces in the cabin. From sunlight exposure to daily contact, it's vulnerable to scratches, scuffs, dust, and UV degradation. This premium matte dashboard cover protects that critical touchpoint while maintaining the modern, understated aesthetic of your interior. Crafted from high-quality TPU (thermoplastic polyurethane), this cover combines softness with durability. The matte finish delivers a sophisticated, non-reflective surface that complements the minimalist design language of the Model 3, while precision laser-cutting ensures every edge sits flush against the original dashboard contours. Installation takes under 5 minutes with a simple peel-and-stick application—no tools, no permanent adhesive, completely reversible. Whether you're protecting your investment or refreshing your interior aesthetic, this cover delivers both protection and understated style. What's Included 📦 Matte Central Dashboard Cover Precision laser-cut TPU with matte finish 📋 Installation Instructions Step-by-step guide with prep checklist Product Highlights High-quality TPU material resists scratches, scuffs, and UV fading Matte finish eliminates gloss and reflections for a refined look Precision laser-cut for perfect alignment with Model 3 dashboard Peel-and-stick application—installs in under 5 minutes Fully reversible, no permanent adhesive or damage to original finish Protects against fingerprints, dust, and daily wear Compatible with 2017–2019 Model 3 (all trim levels) Easy to clean—simply wipe with a soft, dry cloth Maintains dashboard functionality and touch sensitivity Modern aesthetic complements Tesla's minimalist interior design Compatibility Model Year Range Compatibility Tesla Model 3 2017–2019 Direct Fit Tesla Model 3 2020–Present Not Compatible All Other Models — Not Compatible Installation Difficulty Level: Easy | Time Required: Under 5 minutes Prepare the surface: Clean the central dashboard thoroughly with a soft, dry microfiber cloth. Ensure all dust, oils, and residue are removed. Wait 2–3 minutes to allow the surface to dry completely. Inspect the cover: Carefully remove the dashboard cover from its packaging. Check that all edges are intact and lay it flat on a clean surface. Position the cover: Align the cover with the edges of your central dashboard. Take your time to center it properly before pressing down. Apply gently: Starting from the center, slowly peel back the adhesive backing while pressing the cover firmly onto the dashboard with smooth, even pressure. Work outward toward the edges to avoid air bubbles. Secure the edges: Press firmly around all perimeter edges to ensure a strong, lasting bond. Allow the adhesive to set for 24 hours before washing or touching the cover. Note: Dashboard surface must be clean, dry, and free of oils for optimal adhesion. Do not apply in direct sunlight or temperatures below 10°C. Allow full cure time before cleaning. Protect Your Model 3 Today Upgrade your interior with the refined look and durability of a matte dashboard cover. Designed for Tesla Model 3 owners who care about their vehicle's appearance and longevity. Shop Now Code: 22GET20 — 20% off any 2 items ✓ 30-day money-back guarantee ✓ 12,300+ verified reviews ✓ Worldwide shipping ✓ Expert support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla Inc., Elon Musk, or any official Tesla entity. All product names, logos, and trademarks are the property of their respective owners. This dashboard cover is an aftermarket accessory designed for compatibility with the specified vehicle model and year range.

Tesla · Model 3 · Interior Trim Tesla Model 3 Carbon Fiber Interior Trim Kit – 27pc Complete Set Transform your Model 3's cabin with premium carbon fiber accents across door handles, steering wheel, and center console. T3 Carbon Fiber 27 Pieces Interior Trim Direct Fit Overview The Tesla Model 3 is a driver's car—responsive, minimalist, and always rewarding. But the stock interior, while clean, can feel understated. This 27-piece carbon fiber trim kit elevates the cabin with high-contrast accents that catch light and define the space, adding visual depth and a purposeful, performance-oriented aesthetic without compromise. Every piece has been engineered to integrate seamlessly with your Model 3's existing geometry. The carbon fiber is genuinely tactile—woven, not printed—and finished to withstand daily touch, temperature cycling, and UV exposure. These are functional upgrades dressed as cosmetic ones. Installation takes roughly 90 minutes and requires only patience and clean hands. No tools, no drilling, no modifications. When you're done, your cabin will feel like a precision instrument. What's Included 🚪 Door Handle Trim Interior & exterior bezels ⚙️ Center Console Inserts Cup holder & storage surrounds 🎯 Steering Wheel Accents Top and side trim rings 💨 Air Vent Surrounds Front & rear dashboards 📱 Infotainment Bezel Screen surround accent 🔧 Installation Tools & Guide Adhesive-backed, no drilling Product Highlights Real woven carbon fiber—UV-stable, not printed plastic film High-gloss finish resists fingerprints and maintains clarity over time Pre-cut pieces with precision tolerances for exact factory fitment Adhesive backed with 3M automotive-grade tape for permanent hold Safe for factory paint and trim—no damage on removal Thermal resistant: maintains shape from −10°C to +60°C Hydrophobic weave sheds moisture and resists staining All 27 pieces color-matched for visual harmony across cabin Lightweight composite reduces unsprung mass marginally Endorsed by Tesla owners and featured in major forum communities Compatibility Model 3 Generation Years Compatibility Model 3 Standard Range 2017–2024 Direct Fit Model 3 Long Range 2017–2024 Direct Fit Model 3 Performance 2017–2024 Direct Fit Model 3 Highland (2024+) 2024–Present Direct Fit Installation Notes Difficulty: Beginner | Time: ~90 minutes Prepare surfaces: Clean all target areas with isopropyl alcohol on a soft cloth. Ensure completely dry before proceeding. Lay out all pieces: Arrange the 27-piece set in order. Cross-reference the installation guide with your cabin layout. Start with small accents: Begin with air vent surrounds and steering wheel trim. These are least visible if adjustment is needed. Center console next: Carefully position cup holder and storage inserts. Press firmly from center outward to eliminate air pockets. Door handles and bezels: Apply interior handles first, then exterior. Use a heat gun on low setting to help adhesive cure faster. Final inspection: Check all edges for gaps. Press down all high-stress areas with steady, even pressure for 10 seconds each. Cure time: Allow 24 hours before opening doors or using cup holders. Note: Do not install in temperatures below 10°C or above 30°C. Adhesive bonds best in moderate, stable conditions. If edges lift within 48 hours, clean underside with alcohol and reapply. Own Your Cabin Your Model 3 deserves details that match its engineering. This carbon fiber kit turns the interior from functional to refined—a cabin that feels as intentional as the drive itself. Shop Carbon Fiber Trim Kit Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ verified reviews 🚚 Worldwide · DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc., or any of its subsidiaries. Tesla and Model 3 are registered trademarks of Tesla, Inc. This product is an aftermarket accessory designed for compatibility with Tesla Model 3 vehicles.

Tesla · Model 3 · Interior Trim Carbon Fibre Dashboard for Tesla Model 3 Authentic carbon fibre dashboard upgrade that transforms your Model 3's interior with contemporary luxury and precision engineering. T3 2016–2019 Carbon Fibre One-Piece Design Matte & Glossy Overview This carbon fibre dashboard panel is engineered specifically for Tesla Model 3 (2016–2019), delivering a seamless interior upgrade that elevates your driving environment. Built from authentic carbon fibre with precision laser-cut accuracy, this dash panel replaces the factory unit with minimal effort and zero compromise on fit quality. The one-piece design eliminates panel lines and visual breaks, creating a modern, cohesive look that complements the Model 3's minimalist aesthetic. Choose between matte for a subtle, technical appearance or glossy for high-impact visual presence. Pre-applied adhesive makes installation straightforward—no additional bonding agents or specialist tools required. Whether you're refining your cabin's visual hierarchy or adding genuine carbon fibre accents throughout, this dashboard panel works as both a standalone upgrade and part of a complete interior transformation. It's built for enthusiasts who demand quality materials, precision fit, and understated luxury. What's Included 📦 Carbon Fibre Dashboard Panel Precision laser-cut, one-piece design 🔧 Pre-Applied Adhesive Ready to install, no extra bonding needed 📋 Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fibre construction Precision laser-cut for flawless fit One-piece seamless design Matte or Glossy finish options Pre-applied premium adhesive Contemporary, minimalist aesthetic Lightweight material adds no weight penalty Durable, UV-resistant finish Easy DIY installation Tailored for 2016–2019 Model 3 Compatibility & Variants Model & Year Fit Finish Options Tesla Model 3 (2016–2019) Direct Fit Matte, Glossy Tesla Model 3 (2020+) Not Compatible — Installation Difficulty: Beginner | Time: 20–30 minutes Power off vehicle and disable any active displays or autopilot functions. Gently remove the factory dashboard panel using a trim removal tool or soft plastic lever. Clean the underlying surface thoroughly with isopropyl alcohol and allow to dry completely. Carefully peel back the pre-applied adhesive backing and position the carbon fibre panel, starting from the centre and working outward. Press firmly across the entire surface to ensure full contact and adhesion. Allow 24 hours of cure time before operating any dashboard controls or adjusting the panel. Important: Verify your Model 3 year (2016–2019) before purchase. Interior panel dimensions and fitment vary between production runs. If you're unsure, contact support at +44 203 943 9919 (Mon–Fri 9am–7pm) for confirmation. Ready to Upgrade Your Interior? Transform your Tesla Model 3's cabin with authentic carbon fibre that combines modern aesthetics with premium material quality. Direct Fit for 2016–2019 models, installed in under 30 minutes. Add to Cart Use code 22GET20 for 20% off when you order 2+ items. ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with or endorsed by Tesla, Inc. or any official Tesla subsidiary. All vehicle names and trademarks are property of their respective manufacturers. This product is an aftermarket accessory designed for independent use and customisation.

Tesla · Model 3 · Interior Protection Door Lock Cover Rust Protection – Tesla Model 3 Premium chrome and carbon fiber covers that shield your Model 3's door locks from rust and environmental wear while maintaining a refined, factory-matched aesthetic. Model 3 2017–2024 Chrome & Carbon Fiber Interior Protection Set of 4 Overview Your Tesla Model 3 deserves protection against the daily elements that accelerate wear. Door lock mechanisms are vulnerable to moisture, salt, and oxidation—especially in coastal or winter-driven regions. Over time, exposed locks develop rust and corrosion, compromising both function and curb appeal. Our Door Lock Cover set delivers professional-grade protection in two premium finishes: polished chrome for a classic, elegant look, or carbon fiber for modern performance aesthetics. Each cover is engineered to fit seamlessly within your Model 3's existing design language, maintaining the clean lines that define the vehicle. Installation is straightforward and requires no modification to your door assembly. With proper fitment, these covers provide continuous defence against moisture ingress, salt spray, and UV degradation—extending your lock mechanisms' operational lifespan and preserving resale value. What's Included 🛡️ Set of 4 Covers One per door lock ✨ Dual Finish Options Chrome or carbon fiber 📋 Installation Guide Step-by-step instructions 🔒 Easy Attachment No tools or drilling required Product Highlights Advanced rust and corrosion prevention for extended lock life High-grade chrome or authentic carbon fiber finishes Seamless design integration with Model 3 factory aesthetics UV-resistant materials resist fading and discoloration Tool-free installation in minutes per door Waterproof construction prevents moisture infiltration Factory-matched fitment eliminates gaps and rattles Protects resale value by maintaining lock assembly integrity Lightweight, non-invasive design preserves door functionality Works with all Model 3 lock types and handle designs Compatibility Tesla Model 3 Variant Model Years Status Model 3 Standard Range 2017–2024 Direct Fit Model 3 Long Range 2017–2024 Direct Fit Model 3 Performance 2017–2024 Direct Fit Model 3 RWD (2023+) 2023–2024 Direct Fit Model Y (Any Variant) 2020+ Not Compatible Compatibility Tip: Confirm your vehicle's production year and trim variant before ordering. All standard, long-range, and performance Model 3 variants built between 2017–2024 are compatible with this set. Installation 📦 Difficulty: Beginner | Time: 15–20 minutes Prepare the area: Clean all four door lock mechanisms with a soft, dry cloth to remove dust and debris. Ensure surfaces are completely dry before attachment. Check alignment: Hold each cover against its corresponding lock to verify proper fit. Covers should sit flush without gaps or overhang. Apply adhesive backing: If covers feature pre-applied adhesive, carefully remove the protective film. For mechanical fastening, align mounting points with lock housing. Secure the cover: Press firmly into place for 10–15 seconds per cover, ensuring full contact across all edges. Do not over-torque fastening points. Final inspection: Verify that all four covers are level, secure, and visually aligned. Test door lock actuation to confirm no interference with mechanism operation. Allow curing: If adhesive-backed, allow 24 hours before exposing covers to moisture or high-use conditions. Note: Do not force covers if fitment feels tight. Forcing can crack the cover or damage the lock assembly. If resistance is encountered, stop and inspect alignment. Protect Your Model 3. Elevate Its Presence. Door lock covers are a small detail with outsized impact. They're the difference between a lock mechanism that deteriorates and one that endures. Order now and lock in superior protection—backed by our 30-day, no-questions-asked guarantee. Shop Model 3 Protection Use code 22GET20 for 20% off when you buy 2 or more items. ⭐ 4.9 / 5 stars from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✅ 30-day guarantee – full refund, no hassle 📞 +44 203 943 9919 – Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Tesla, Inc., Elon Musk, or any official Tesla subsidiary. Tesla is a registered trademark of Tesla, Inc. All vehicle names, logos, and specifications are used solely for compatibility and reference purposes. Product descriptions and claims are the responsibility of Victorious Automotive and do not reflect official Tesla product standards or support.

Victorious · Tesla Model 3 · Interior Protection Door Sill Scuff Plate Protective Sticker for Tesla Model 3 Premium carbon fibre styling meets durable TPU protection — guard your Model 3's door sills against daily scuffs and scratches. Tesla Model 3 Interior TPU Material Carbon Fibre Design 4-Piece Set Anti-Scratch Overview Your Tesla Model 3's interior deserves protection as refined as the car itself. Door sills endure constant contact from boots, shoes, and daily entry—accumulating scuffs that compromise aesthetics and resale value. This four-piece protective sticker set wraps each door sill in sleek carbon fibre styling while delivering genuine anti-scratch defence. Engineered from premium TPU (thermoplastic polyurethane), these panels absorb impact, resist abrasion, and maintain their finish for years of daily use. Installation is straightforward and non-invasive. No drilling, no permanent modifications—simply clean, align, and adhere. The result: a showroom-fresh interior that stays protected every single day. What's Included 📦 4-Piece Door Sill Set One sticker for each door, all four doors covered ✓ Pre-Cut & Ready Precision engineered to fit Model 3 door sill geometry 🛡 TPU + Carbon Film Protective layer with premium styling finish 📋 Installation Guide Clear instructions included in package Product Highlights Carbon fibre finish elevates interior aesthetics Premium TPU material resists cracks and peeling Complete four-door coverage in one set Anti-scratch protection guards against scuff marks Easy self-adhesive application—no tools required Maintains durability through seasons of daily use Preserves resale value by protecting original sills Non-invasive installation—no permanent modifications Modern styling complements Model 3 minimalist interior Designed for sustained performance without fading Compatibility Tesla Model 3 Variant Compatibility Model 3 Standard Range (All Years) Direct Fit Model 3 Long Range (All Years) Direct Fit Model 3 Performance (All Years) Direct Fit Model 3 Highland (2024+) Direct Fit Model Y / Other Tesla Models Not Compatible Installation Difficulty: Beginner | Time: 15–20 Minutes Clean the sills: Use a microfibre cloth and mild soap solution to remove dust, debris, and residue from all four door sills. Dry completely with a lint-free cloth. Prepare the stickers: Carefully peel each protective sticker from its backing. Handle by the edges to avoid fingerprints on the adhesive side. Align precisely: Position the first sticker on the driver's door sill, aligning edges with the sill geometry. Press gently to set alignment without full adhesion. Secure the fit: Once aligned, apply firm, even pressure across the entire sticker surface, working from centre outward to eliminate air bubbles. Repeat for remaining doors: Follow steps 2–4 for the front passenger, rear left, and rear right door sills. Allow cure time: Let adhesive set for 24 hours before exposing to moisture or heavy use. Important: Ensure the surface is completely dry and free of oils before application. Proper cleaning directly affects adhesion longevity and performance. Protect Your Model 3 Interior Door sill scuffs accumulate quietly—but they speak loudly about care. This four-piece protective set transforms that vulnerability into confidence, delivering stylish carbon fibre finishes backed by genuine TPU durability. Shop Door Sill Protectors Use code 22GET20 for 20% off when you buy any 2 items 30-Day Money Back Guarantee 12,300+ Verified Reviews 4.9/5 Customer Rating Worldwide DHL & FedEx Shipping Victorious Automotive is an independent aftermarket accessories specialist. We are not affiliated with Tesla, Inc., or any official Tesla division. All product names, logos, and trademarks are the property of their respective owners. This product is designed and tested for Tesla Model 3 compatibility only.

Tesla · Model 3 · Interior Accessories Tesla Model 3 Center Console Wrap Mat – Non-Slip Protective Cup Holder Pad Premium protection and style for your Model 3's center console with glow-in-the-dark functionality and wear-resistant design. Model 3 2017–2024 Carbon Fiber Latex Non-Slip Design Glow-in-Dark 7-Piece Set Overview The Tesla Model 3's center console is exposed to daily wear—from fingerprints to spills to UV fading. This comprehensive 7-piece protective wrap mat set shields your console, cup holder, and gate slot areas from damage while maintaining the clean, minimalist aesthetic Tesla owners demand. Engineered from premium carbon fiber-textured latex compound, these mats deliver a factory-quality fit and glow-in-the-dark visibility for nighttime driving comfort. The non-slip surface keeps your phone, wallet, and drink secure, while the wear-resistant material resists scratches and discoloration over years of use. Choose from white, red, or blue color combinations to match your interior theme. Whether you're protecting an investment or personalizing your cabin, this set offers both function and visual upgrade in one simple installation. What's Included 🛡️ 7-Piece Mat Set Complete center console coverage ☕ Cup Holder Pads Anti-slip protection for beverages 🚪 Gate Slot Mats Defined console pocket coverage ✨ Glow-in-Dark Tech Nighttime visibility enhancement Product Highlights Non-slip latex surface keeps items secure during acceleration and braking Carbon fiber texture matches modern EV interior design language Glow-in-the-dark material enhances visibility during evening drives Wear-resistant compound resists scratches, spills, and UV fading Perfect factory-fit for Model 3 center console architecture Available in white, red, or blue color combinations Easy peel-and-stick installation—no tools required Durable for long-term daily use without degradation Protects original console finish from fingerprints and damage 30-day money-back guarantee if not satisfied Compatibility Tesla Model 3 Generation Model Year Range Compatibility Model 3 (Standard Range) 2017–2024 Direct Fit Model 3 (Long Range) 2017–2024 Direct Fit Model 3 (Performance) 2017–2024 Direct Fit Model 3 Highland (2024+) 2024+ Not Compatible Model Y / S / X All Years Not Compatible Installation Notes ⚡ Installation Difficulty: Beginner Estimated Time: 10–15 minutes | Tools Required: None Clean the center console and cup holder areas thoroughly with a dry microfiber cloth. Remove any dust or debris. Peel the backing from the first mat piece, starting with the main console wrap. Align the mat with the console edge and press firmly, working from center outward to avoid air bubbles. Apply cup holder pads next, centering them in each receptacle for maximum coverage. Install gate slot mats by carefully positioning them along the defined pocket edges and pressing to secure. Allow 24 hours of cure time before placing heavy items on the mats for optimal adhesion. Important: Color variations may occur due to lighting conditions in photography. The glow-in-the-dark effect requires ambient light exposure to activate. Verify your Model 3 year matches compatibility before purchase—Highland models (2024+) feature a redesigned console. Protect Your Tesla Model 3 Interior Today Transform your center console from fingerprint magnet to showroom-quality protected surface. With glow-in-the-dark functionality, non-slip grip, and factory-matched fit, these mats are the simplest upgrade for Model 3 owners who demand both style and durability. Shop Model 3 Accessories Use code 22GET20 for 20% off any 2 items. Worldwide shipping via DHL, FedEx, UPS, TNT. 4.9/5 — 12,300+ Verified Reviews ✓ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Expert Support Victorious Automotive is an independent accessory specialist and is not affiliated with Tesla, Inc., or its subsidiaries. All product names and trademarks are the property of their respective owners. This description is for compatibility and informational purposes only.

Premium Auto Interior · Tesla Model 3 · Trim Accents Carbon Fibre Window Switch Trim for Tesla Model 3 2018–2019 Four-piece pre-applied window switch trim set with premium carbon or silver finish—elevate your Model 3 interior in minutes. Model 3 2018–2019 TPU Carbon Fiber Interior Trim Pre-Applied Adhesive Overview The Tesla Model 3 benefits from thoughtful interior refinement, and window switches are the perfect accent point to elevate your cabin's visual impact. This four-piece carbon fibre trim set is engineered to frame your window controls with a sleek, modern aesthetic that complements both the minimalist Tesla interior and your personal driving style. Crafted from premium TPU material, each trim piece delivers durability and a sophisticated appearance in either bold Carbon or sleek Silver finish. The pre-applied adhesive backing ensures installation is straightforward—no additional tools, no expertise required. Clean the surface, position, and press. Your Model 3 interior is transformed. Whether you're refining the smallest details or making a statement with premium accents, this trim set is built for owners who understand that luxury lives in the details. What's Included ⚙️ Four-Piece Trim Set One for each window switch location ✦ Pre-Applied Adhesive Backing Ready to install straight from packaging 🎨 Carbon or Silver Finish Choose your preferred aesthetic 📦 Premium TPU Material Durable, long-lasting surface protection Product Highlights Sleek carbon fibre design elevates interior aesthetics instantly Premium TPU construction resists wear, scratches, and fading Two finish options: Carbon or Silver to match your taste Perfect fit for Model 3 2018–2019 window switch locations Pre-applied adhesive—no messy application required Maintains factory appearance while adding visual depth Easy to install in under 5 minutes Compatible with factory interior without modification Enhances cabin cohesion and attention to detail Built to last the lifetime of your vehicle Compatibility Model Years Compatibility Tesla Model 3 2018–2019 Direct Fit Tesla Model 3 2020+ Not Compatible Tesla Model Y All Years Not Compatible Tesla Model S All Years Not Compatible Installation Difficulty Level: Beginner | Time: 5 minutes Prepare the surface: Clean each window switch location with a soft, dry cloth. Ensure no dust, dirt, or residue remains for optimal adhesive contact. Position the trim: Carefully peel back the adhesive backing from the first trim piece. Align it precisely with the window switch frame. Apply firm pressure: Press down firmly for 10–15 seconds, working from the centre outward to eliminate air bubbles. Repeat for remaining trims: Follow the same process for the remaining three trim pieces, one at a time. Allow adhesive to set: Wait 24 hours before operating windows or cleaning the area to ensure full adhesion strength. ⚠️ Important: Do not attempt installation on wet or contaminated surfaces. Clean thoroughly with isopropyl alcohol if required, then allow 30 minutes for complete drying before adhesive contact. Elevate Your Model 3 Today Premium interior details transform your daily drive. This carbon fibre window switch trim set is the finishing touch your Tesla Model 3 deserves—crafted for owners who demand quality and precision in every accent. Shop Window Switch Trim Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping ✓ 4.9/5 Stars – 12,300+ Reviews Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Tesla, Inc., or any official Tesla subsidiary. All vehicle names and designations are used for identification and compatibility reference only. Product fitment and performance are warranted by Victorious Automotive alone.