Key Covers

Victorious Automotive · Range Rover Vogue L405 · Interior Trim Aluminum Alloy Central Air Conditioning Trim for Range Rover Vogue L405 (2018–2020) A precision-machined aluminium alloy upgrade that replaces the factory plastic climate control surround with a sculpted, weighted finish worthy of the Vogue's interior. Range Rover Vogue L405 2018–2020 Aluminum Alloy Silver / Red / Blue Direct Fit No Drilling Interior Trim Under 2 Min Install Overview The Range Rover Vogue L405 is one of the most accomplished luxury SUVs ever produced — a vehicle whose interior is expected to feel as considered and composed as the engineering beneath it. From the 2018 model year through to the final L405 run in 2020, Land Rover's flagship offered a level of refinement that very few vehicles can match. But the factory climate control surrounds, finished in standard plastic, remain one of the few areas where the cabin's premium ambition falls slightly short of its potential. This Aluminum Alloy Central Air Conditioning Trim is designed specifically to address that. Machined from high-grade aluminium alloy and available in Silver, Red, and Blue anodised finishes, it replaces the stock plastic surround around the central HVAC and audio controls with a component that feels genuinely substantial in the hand — and looks the part the moment you close the door. The heavier-weight construction gives it a solidity that plastic simply cannot replicate, while the precision fit ensures it sits flush with the surrounding dashboard architecture. Installation requires no tools, no drilling, and no modification to your vehicle's wiring or trim panels. The trim adheres via a purpose-fitted mounting system that holds securely across daily use and temperature variation. Whether you're refreshing a well-loved Vogue or adding a final detail to a recent purchase, this is one of the most immediate interior upgrades available for the L405 platform. What's Included 🧩 Central AC Trim Set Full surround for HVAC & audio control zone 🔧 Mounting Adhesive Strips Pre-applied, high-bond automotive-grade adhesive 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Protective Packaging Foam-lined box to prevent transit damage Product Highlights Precision-machined from high-grade aluminium alloy for genuine weight and rigidity Available in Silver, Red, and Blue anodised finishes to suit your interior Direct fit for Range Rover Vogue L405 2018–2020 — no modification required Installs in under 2 minutes with no tools, drilling, or panel removal Heavier-weight construction dramatically improves the tactile feel of the control zone Replaces the factory plastic surround for a more premium, cohesive dashboard aesthetic Flush fitment sits seamlessly within the existing dashboard architecture High-bond automotive adhesive backing holds securely through temperature extremes Does not obstruct, interfere with, or alter HVAC or audio control functionality Reversible installation — returns cleanly to factory specification if required Compatibility Model Code Year Range Fit Range Rover Vogue SE L405 2018 Direct Fit Range Rover Vogue L405 2019–2020 Direct Fit Range Rover Sport L494 2018 Direct Fit Range Rover Velar L560 2017–2018 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Vogue L405 2013–2017 Not Compatible Not sure which model year you have? Call us on +44 203 943 9919 Mon–Fri, 9am–7pm and we'll confirm compatibility before you order. Installation Notes ⏱ Difficulty: Beginner  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure the dashboard surface around the HVAC control area is clean, dry, and free from dust, grease, or moisture. A light wipe with an isopropyl alcohol cloth is recommended for optimal adhesion. Remove the protective backing from the pre-applied adhesive strips on the reverse of the trim piece. Align the trim carefully over the factory climate control surround, using the moulded edges as a guide to ensure accurate positioning before making contact. Press firmly and evenly across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Allow 30 minutes before regular use to allow the adhesive to fully cure at ambient cabin temperature. ⚠ Please Note: Confirm your exact model year and trim level before fitting. The 2018–2020 L405 HVAC panel layout differs from earlier L405 production years. Do not attempt to fit on non-listed models — panel geometry and control positioning will not align. If you are unsure, contact our team before installation. Upgrade Your Vogue's Interior Today Join over 12,300 Range Rover and Land Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop All Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Mercedes-Benz · Exhaust Covers AMG Quad Pipe Exhaust Cover for Mercedes-Benz GLC, A, B, C, E-Class (2016–2017) Premium stainless steel exhaust trim that elevates your Mercedes aesthetic with a sporty, high-performance finish. GLC W205 W213 W176 W246 2016–2017 304 Stainless Steel Quad Pipe Design Tape Install Overview Designed for Mercedes-Benz owners who demand visual authenticity without compromise, this AMG exhaust cover transforms the rear end of your C-Class W205 Coupe, GLC Class, B-Class W246, E-Class W213 Coupe, and A-Class W176 into a statement of refined sportiness. The quad-pipe aesthetic mimics high-spec AMG models, giving your vehicle an instantly elevated presence. Engineered from marine-grade 304 stainless steel, this cover delivers the durability and mirror finish expected in premium automotive accessories. Available in shiny silver or gloss black, it integrates seamlessly with your Mercedes' design language while resisting salt spray, UV exposure, and weathering. Installation is refreshingly straightforward—automotive-grade double-sided adhesive tape eliminates the need for tools, welding, or professional fitting. Most owners complete the job in under 15 minutes per side. What's Included 📦 Exhaust Covers (Pair) 2× stainless steel quad-pipe covers 🧴 Adhesive Tape (Pre-Applied) Automotive-grade double-sided tape 📋 Fitting Guide Step-by-step installation instructions ✓ Quality Assurance Pre-fit tested on your vehicle model Product Highlights 304 stainless steel construction for superior corrosion resistance Available in shiny silver and gloss black finishes Thicker gauge material for authentic proportional appeal Pre-applied automotive-grade adhesive tape No tools, welding, or drilling required Fits factory exhaust pipes precisely Mirrors OEM AMG quad-pipe styling Weather-resistant and salt-spray tested 30-day money-back guarantee on all purchases Comprehensive vehicle compatibility support Compatibility Model Code Years Fit C-Class Coupe W205 2015–2017 Direct Fit GLC Class C253 2016–2017 Direct Fit B-Class W246 2015–2016 Direct Fit E-Class Coupe W213 2014–2017 Direct Fit A-Class W176 2016–2017 Direct Fit Installation Notes Difficulty: Beginner | Time: 15 minutes per side Clean and dry the exhaust pipe surface thoroughly with a microfiber cloth and isopropyl alcohol. Remove the protective backing from the pre-applied adhesive tape on the exhaust cover. Carefully position the cover over the exhaust pipe, aligning it with the factory outlet. Press firmly and evenly across the entire surface for 20 seconds to ensure full adhesion. Allow 24 hours of cure time before exposure to heat or high speeds. Repeat steps 1–5 for the second cover. Important: Allow the exhaust system to cool completely before installation. Wet or contaminated exhaust pipes will compromise adhesive performance. Do not install on vehicles exceeding factory exhaust temperatures. Elevate Your Mercedes Styling Join thousands of discerning Mercedes owners who've transformed their rear fascia with premium quad-pipe exhaust covers. Authentic AMG looks, professional finishing, backed by Victorious Automotive's 30-day guarantee. View Current Stock Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL 📞 +44 203 943 9919 ↩️ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official OEM entity. Product compatibility is based on published factory specifications. Always verify fitment before purchase. Improper installation may void vehicle warranty; consult your dealership if unsure.

Victorious · Range Rover Sport L494 · Exhausts Range Rover Sport SVR Quad Tip Exhaust Muffler – 2018–2019 Stainless steel quad exhaust trim covers that transform your Sport's rear end into a factory SVR look—premium aesthetics without the full system cost. L494 2018–2019 Stainless Steel Chrome & Black Adhesive Install Overview The Range Rover Sport L494 (2018–2019) has always been understated in its factory guise. This quad exhaust trim cover set elevates that presence immediately, channeling the aggressive visual language of the SVR performance variant while maintaining your existing exhaust system. Engineered from aerospace-grade stainless steel, these covers arrive pre-finished in either mirror-bright Chrome or Deep High Gloss Black, giving you the flexibility to match your Sport's signature look. The lightweight construction means zero impact on handling or fuel economy—this is pure aesthetic transformation. Installation takes under 30 minutes. The supplied automotive adhesive tape is engineered for temperature resilience and vibration absorption, ensuring these stays put through seasons of motorway and track use. No drilling, no modifications, no second-guessing. What's Included 🔲 Quad Exhaust Trim Pair Left and right stainless steel covers 📋 Automotive Adhesive Tape Pre-cut pads for secure bonding 📖 Installation Guide Step-by-step with prep checklist ✓ 30-Day Money Back If not completely satisfied Product Highlights Stainless steel construction resists corrosion and maintains finish for years SVR-inspired quad design transforms rear profile instantly Chrome and High Gloss Black finishes suit every Sport specification Lightweight—zero performance impact or fuel penalty Pre-cut adhesive tape simplifies alignment and bonding Temperature-resistant adhesive handles UK heat cycles and freeze No drilling or modification to original bodywork required Direct fit for L494 Sport 2018–2019 models only Vibration-damped backing prevents rattle and movement 30-day satisfaction guarantee—risk-free investment Fitment & Compatibility Model & Year Generation Compatibility Range Rover Sport 2018–2019 L494 Direct Fit Range Rover Sport 2013–2017 L494 Not Compatible Range Rover Sport 2020+ L460 / New Gen Not Compatible Range Rover Vogue (All) L460 / L405 Not Compatible Range Rover Evoque (All) L538 / L551 Not Compatible Note: This product is designed exclusively for 2018–2019 Range Rover Sport L494 models. If you own a 2020+ Sport, view our L461 collection here. Installation DIY Difficulty: Beginner | Time: 20–30 minutes Prepare the surface: Clean the existing exhaust outlet area thoroughly with a microfibre cloth and isopropyl alcohol. Allow to dry completely (5 minutes minimum). Heat the adhesive: Use a heat gun or hair dryer on medium setting to gently warm the adhesive tape backing for 30–45 seconds. This activates the polymer bonding agents. Align carefully: Position the left trim cover first, ensuring it sits flush with the exhaust outlet edge. Use the installation guide as a visual reference. Apply firm pressure: Press down for 10–15 seconds along the entire surface, working from centre outward to remove air pockets. Repeat for right side: Follow steps 2–4 for the passenger-side cover, maintaining symmetry. Cure time: Leave untouched for 24 hours before first drive. This allows full adhesive cross-linking. Important: Do not expose the vehicle to high-temperature exhaust fumes for 48 hours post-installation. Allow adhesive to fully cure before towing or aggressive driving. Heat activation of the adhesive tape is critical for long-term durability. Ready to Elevate Your Sport? Transform your 2018–2019 Range Rover Sport into the aggressive, visual heavyweight it deserves to be. These quad exhaust trims deliver SVR-level stance without compromise. Shop Quad Exhaust Trims Use code 22GET20 to save 20% when ordering 2+ items from our Sport collection. 4.9★ 12,300+ verified reviews ✓ 30-day money back 🚚 Worldwide delivery 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names and vehicle designations are used for identification purposes only. Installation of this product does not void your manufacturer warranty, though fitment by a qualified technician is recommended. Always verify fitment with your specific VIN before ordering.

Victorious · Mercedes-Benz · Entertainment 11.6-Inch Android Rear Entertainment Screens for Mercedes-Benz Dual wireless screens with 1080p streaming, built-in WiFi, and Google Play access for premium rear-seat entertainment. Mercedes W204/W205/W212/W213 Android 8.1 Dual 11.6" Displays WiFi & Bluetooth 1920×1080 IPS Overview Mercedes-Benz owners demand premium cabin technology that matches their vehicle's sophistication. These dual 11.6-inch Android rear entertainment screens deliver broadcast-quality 1080p resolution with a quad-core processor, transforming your cabin into a connected entertainment hub. Whether your passengers are on a family road trip or a business journey, these screens provide distraction-free access to Netflix, Amazon Prime, and hundreds of streaming apps via WiFi tethering. Each display features a 1920×1080 IPS TFT-LCD panel with wide viewing angles and vivid color reproduction—calibrated for luxury vehicle environments. The Android 8.1 operating system provides direct access to Google Play Store, allowing unlimited app downloads. Dual headphone connectivity (wired and wireless) ensures personalised audio without cabin spillover, while the integrated FM transmitter and Bluetooth voice functionality create seamless in-car communication. Installation connects to your 12V auxiliary power and integrates cleanly into OEM headrest mounts. The modular design supports multiple Mercedes platforms—from the C-Class to the S-Class sedan range. Pre-loaded with an intuitive launcher, these screens require minimal configuration out of the box. What's Included 📺 Dual 11.6" Android Screens 1920×1080 IPS display, quad-core processor, 16GB RAM 🔌 12V Power Harness Direct connection to vehicle auxiliary power 🎧 Wireless Headphone Support Bluetooth connectivity + wired 3.5mm jack 📱 Google Play Store Access Download Netflix, Amazon Prime, and thousands of apps Key Features & Specifications 1080p Full HD IPS display with 1920×1080 resolution and wide viewing angles Android 8.1 OS with quad-core car-class processor and 16GB RAM (2GB storage) Built-in WiFi and 3G USB Dongle support for connectivity Netflix, Amazon Prime, YouTube, and all major streaming apps via WiFi tethering 1080P HD media player supporting AVI, MKV, MP4, MOV, WMV formats Audio playback: MP3, WMA, APE, FLAC with dual headphone connectivity Bluetooth voice functionality and FM transmitter (87.5–108MHz output) USB stick and microSD card support for offline media playback Multilingual interface: Chinese, English, German, French, Russian, Italian, Spanish, and more Easy 12V power connection with plug-and-play installation design Vehicle Compatibility Model Class Years Status C-Class (W204 / W205) 2007–Present Compatible E-Class (W212 / W213) 2009–Present Compatible S-Class (W221 / W222) 2005–Present Compatible A-Class (W176 / W177) 2012–Present Compatible B-Class (W245 / W246) 2005–Present Compatible CLA-Class (C117 / C118) 2013–Present Compatible GLA-Class (X156) 2013–Present Compatible GLC-Class (X253) 2015–Present Compatible GLE-Class (W167) 2019–Present Compatible G-Class (W464) 2018–Present Not Recommended Compatibility Note: Verify your vehicle's OEM power connections and headrest mount configuration before ordering. We recommend professional installation to ensure proper integration with your Mercedes electrical system. Installation Guide Difficulty: Intermediate | Time: 45–60 minutes Power Setup: Locate your vehicle's 12V auxiliary power source (typically under the rear seat or in the trunk). Use the included harness to connect the positive and negative terminals. Mount Installation: Secure both screens into OEM or universal headrest brackets. Ensure they are level and free from obstruction. Cable Routing: Route power and any cable connections through existing conduit along the seat backs to avoid visible wiring. WiFi Configuration: Power on the screens and connect to your smartphone's WiFi hotspot via the Android settings menu. Proceed through initial setup wizard. App Installation: Open Google Play Store and download Netflix, Amazon Prime, YouTube, and your preferred entertainment apps. Bluetooth Pairing: For wireless headphones, access Bluetooth settings and scan for available devices. Connect both sets of headphones. Test Playback: Stream a test video and verify audio/video sync. Adjust brightness and volume settings to preference. Final Checks: Ensure both displays power off when the ignition is off. Verify all harness connections are secure. Important: Always disconnect the negative battery terminal before working with 12V connections. If your vehicle has active safety features (airbags near headrests), consult your dealership before installation. Ready to Upgrade Your Cabin? Transform your Mercedes rear-seat experience with premium 1080p Android entertainment. Dual screens, seamless streaming, and distraction-free passenger comfort—all ready to install. Shop Rear Screens Use code 22GET20 for 20% off any 2 items ✓ 30-day Money-Back Guarantee ✓ 4.9/5 Stars – 12,300+ Reviews ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes brand entity. Product names and vehicle codes are provided for compatibility reference only. Always verify fitment with your specific vehicle before purchase. Installation should be performed by qualified professionals. Victorious Automotive assumes no liability for improper installation, electrical damage, or warranty voidance on your vehicle.

BMW · 1, 3, 4, 5, 6, 7 Series · Key Accessories BMW Carbon Fiber Smart Key Cover – F10, F20, F30 3-Button Models Premium carbon fiber key protection that elevates your BMW's finishing touches with authentic motorsport styling. F10 F20 F30 2010–2020 Carbon Fiber 3-Button Smart Key Protective Shell Overview BMW drivers understand that every detail matters. Your smart key is in your hand multiple times daily, yet it's often overlooked as an opportunity to reinforce your vehicle's performance-focused character. This premium carbon fiber key cover transforms a functional accessory into a statement piece that mirrors the precision engineering of your 1, 3, 4, 5, 6, or 7 Series. Engineered for the F10, F20, and F30 generation 3-button models, this shell case combines protective functionality with unmistakable motorsport aesthetics. The lightweight carbon fiber lines create a tactile, modern finish that resists daily wear while keeping your original key mechanism secure and intact. Installation requires no tools and takes under two minutes. Whether you're restoring attention to detail or simply elevating your daily interaction with your BMW, this cover delivers both substance and style. What's Included 🔑 Carbon Fiber Key Cover Premium protective shell, ready to fit Product Highlights Premium carbon fiber material with refined finish Designed for 3-button smart key models only Protects original key from scratches and impact Lightweight — minimal bulk, maximum style Tool-free installation in under 2 minutes Authentic motorsport aesthetics for BMW enthusiasts Maintains full functionality of all key buttons Durable construction for long-term daily use Compatible with F10, F20, F30 generation 3-button models Restores focus to interior finishing details Compatibility Model Code Years 3-Button Smart Key Fit BMW 1 Series F20 2011–2019 ✓ Direct Fit BMW 3 Series F30 2012–2019 ✓ Direct Fit BMW 4 Series F32 2013–2020 ✓ Direct Fit BMW 5 Series F10 2010–2017 ✓ Direct Fit BMW 6 Series F12 / F13 2011–2018 ✓ Direct Fit BMW 7 Series F01 / F02 2009–2015 ✓ Direct Fit Compatibility Check: Verify your key has 3 buttons (Lock, Unlock, Trunk) before ordering. Confirm key model year aligns with your vehicle generation. If unsure, contact our team at +44 203 943 9919. Installation Difficulty: Beginner · Time: 2 minutes Remove your BMW smart key from pocket or bag. Locate the seam between the key fob halves on the side edge. Gently insert a flat tool (coin or plastic lever) into the seam and twist slightly to open the fob. Separate the two halves carefully without forcing any internal components. Slide the carbon fiber cover shell over the upper or lower half (depends on design orientation). Press the fob halves back together until they click into place — do not overtighten. Test all three buttons to confirm full functionality before daily use. Note: The internal smart key mechanism remains completely unchanged. This cover is purely protective and aesthetic. If your key has any battery or electrical issues before installation, address those separately. Ready to Refine Your Details? Small touches define ownership. Add motorsport character to your BMW with this premium carbon fiber key cover — protective, practical, and unapologetically engineered. Shop Carbon Fiber Key Covers 22GET20 — Save 20% on any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💰 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW subsidiary. All product names, logos, and brands are property of their respective owners. This product is designed to be compatible with the listed BMW models; compatibility is the customer's responsibility to verify before purchase.

Victorious · Multi-Vehicle · Protection Carbon Fiber Door Sill Protector for 2010–2020 Vehicles Premium TPU protection with authentic carbon fiber styling—easy to apply, durable, and universally compatible across a decade of vehicle platforms. 2010–2020 Model Years Multi-Vehicle Compatible Premium TPU Material Carbon Fiber Effect Self-Adhesive Overview Designed for any enthusiast looking to protect and elevate their vehicle's interior and exterior trim, this Carbon Fiber Door Sill Protector offers genuine protection against scuffs, scratches, and everyday wear. Whether you're driving a 2010 model or a 2020 platform, this universal solution installs on door sills, bumpers, exterior moldings, and more—wherever protection and style intersect. Constructed from premium thermoplastic polyurethane (TPU), this protective film features a sophisticated carbon fiber aesthetic that complements modern and classic vehicle designs alike. The material is engineered for durability, resisting fading, peeling, and degradation from UV exposure and harsh weather conditions. What sets this protector apart is its versatility. Offered in four distinct sizes, you can customize coverage to suit door sills, bumpers, side moldings, or any high-impact area. The material is pre-cut, but easily shapeable—trim with precision and apply with confidence using the included self-adhesive backing. What's Included 📦 1x Protective Film Roll Pre-sized, self-adhesive TPU material ✂️ Easy Cut & Shape Trimmer-friendly for custom application areas 🎨 Carbon Fiber Finish Authentic weave pattern for premium appearance 🌍 Universal Fit Compatible with 2010–2020 vehicle range Product Highlights Premium TPU material resists UV damage and weathering Authentic carbon fiber aesthetic elevates interior and exterior design Self-adhesive backing—no additional fasteners or tools required Easy to cut and shape for precise, custom applications Protects door sills, bumpers, moldings, and trim from scuffs Four size options for versatile coverage across vehicle types Durable formula maintains appearance for years of use Non-invasive installation—no drilling, gluing, or modifications Suitable for all 2010–2020 vehicle platforms and manufacturers Professional finish—looks OEM when properly applied Size & Specification Options Size Option Dimensions Best For Size 1 5cm × 2.5 meters Full door sill coverage on multiple doors Size 2 5cm × 1 meter Single door sill or partial coverage Size 3 3cm × 2.5 meters Narrow trim and molding protection Size 4 3cm × 1 meter Accent details and bumper trim Installation Notes Difficulty Level: Beginner | Time: 15–30 minutes Prepare the surface: Clean the door sill or trim area thoroughly with soap and water. Dry completely and wipe with rubbing alcohol to remove oils and residue. Measure and mark: Hold the film against the target area. Use painter's tape to mark the edges and ensure proper alignment. Cut to size: Using a sharp utility knife or scissors, carefully trim the film to match your marked dimensions. Keep cuts clean and straight. Peel and apply: Starting at one end, slowly peel the backing and apply the film to the surface, pressing firmly as you progress to eliminate air bubbles. Set firmly: Once applied, use a soft squeegee or credit card to press the entire surface, working out any trapped air from center to edges. Allow to cure: Let the adhesive set for 24 hours before exposing the area to moisture or extreme conditions. Important: Do not apply to wet, dusty, or oily surfaces. For best adhesion and appearance, apply in temperatures above 10°C (50°F). If bubbles form during application, lift gently and re-press rather than puncturing the film. Protect Your Vehicle's Edge in Style This Carbon Fiber Door Sill Protector delivers the durability and aesthetics your vehicle deserves. Whether protecting against daily scuffs or adding a touch of modern design, this TPU film is the universal solution for any 2010–2020 platform. Add to Cart Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Money Back Guarantee ✓ 4.9/5 – 12,300+ Reviews ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All trademarks, logos, and brand names are the property of their respective owners. This product is an aftermarket accessory and is sold as-is for customization purposes.

Victorious · Mercedes · Mirror Covers Carbon Fiber Mirror Covers for Mercedes A, C, CLS, E & CLA Class Premium replacement mirror covers with genuine carbon fiber weave and OEM fitment—available in five striking styles including AMG performance look. W176 / W204 / W207 / W212 / W218 / W221 2008–2017 Carbon Fiber + ABS Laminate Dry Carbon Add-On Option 5 Finish Styles Overview Whether you drive a C-Class W204, E-Class W212, CLS W218, or A-Class W176, these carbon fiber mirror covers deliver the aggressive sportiness Mercedes-AMG owners demand. Built on OEM mirror bases using lamination technology—where genuine carbon weave is infused directly into the plastic substrate—these covers achieve perfect fitment while delivering stunning visual impact. Available in five finishes: carbon fiber with red racing line, carbon fiber with blue accents, matte black, gloss black, or our signature AMG-inspired performance look. Each pair ships as left and right covers, ready for a straightforward swap or add-on application. The lamination process ensures durability without the fragility of pure dry carbon. Finished with high-gloss lacquer, these mirrors are built to last while turning heads on the road. What's Included 🪞 Mirror Cover Pair (L+R) Left and right covers ready to install 🛠️ Fitment Guide Easy-follow installation instructions ✓ OEM Fit Confirmed Direct replacement—no modifications 📦 Secure Packaging Protected for safe worldwide delivery Product Highlights Laminated Carbon Fiber – genuine weave infused into OEM plastic substrate Five Finish Options – red line, blue line, matte black, gloss black, AMG look 1:1 OEM Fitment – drop-in replacement, no drilling or modifications High-Gloss Lacquer Finish – UV-resistant, durable protection Dual Installation Modes – replacement or add-on with double-sided tape Race-Inspired Design – aggressive styling perfect for performance-focused owners Lightweight Construction – approximately 1kg per pair Perfect Mirror Glass Retention – covers fit around your existing mirror glass Precise Edge Finishing – seamless edges blend with door panel Colour-Coded Options – match your engine bay, brake calipers, or accent trim Compatibility Mercedes Model Chassis Code Year Range Fit Status A-Class W176 2013–2017 Direct Fit C-Class (Sedan) W204 2007–2014 Direct Fit C-Class (Cabriolet) W207 2009–2017 Direct Fit E-Class W212 2010–2016 Direct Fit CLS-Class W218 2011–2017 Direct Fit S-Class W221 2007–2013 Direct Fit GLA-Class X156 2015+ Direct Fit GLK-Class X204 2008+ Direct Fit CLA-Class W117 2013+ Direct Fit Installation Guide Replacement Method (Recommended) Remove Original Mirrors: Carefully prise the OEM mirror cover from the door panel using a soft plastic trim tool. Work gently to avoid scratching painted surfaces. Disconnect Wiring (if electric): If your mirrors include electric adjustment, unplug the connector before full removal. Align New Cover: Position the carbon fiber cover over the mirror assembly, ensuring clips engage fully with the door panel frame. Secure Fitment: Press firmly until you hear/feel three distinct clicks confirming full seating. No tools required. Reconnect Electronics: Plug in the electrical connector if applicable; test mirror movement to confirm function. Final Inspection: Check alignment around the door seam and body line—should sit flush with zero gaps. ⚠️ Replacement Note: This method works best when removing original OEM covers carefully. If original mirrors are damaged or stuck, use the add-on method instead. Add-On Method (Dry Carbon Option) Clean Existing Covers: Wash and dry the OEM mirror covers thoroughly with warm soapy water; dry with microfibre cloth. Wipe with Isopropyl Alcohol: Use IPA or panel wipe to remove any oils, dust, or residue from the mirror surface. Apply Double-Sided Tape: Peel and apply automotive-grade 3M double-sided tape (provided) to the back of the dry carbon cover, matching the contour of the mirror. Position Carefully: Align the cover with the OEM mirror, pressing from the centre outward to avoid air pockets. Press for 60 Seconds: Apply firm, even pressure for at least a minute to ensure full tape contact and cure. Allow 24-Hour Cure: Do not drive for at least 24 hours to allow adhesive to reach full strength. ⚠️ Add-On Note: Double-sided tape adhesion lasts 3–5 years in typical conditions. This method is fully reversible—simply lift the cover gently and wipe any residue with IPA. Ready to Transform Your Mercedes? These carbon fiber mirror covers are engineered for owners who refuse to compromise on style or quality. Whether you're building a complete AMG aesthetic or adding a single aggressive accent, we ship worldwide with full 30-day money-back confidence. View All Mercedes Styles Use code 22GET20 for 20% off when buying any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL/FedEx 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist accessory retailer. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler AG, or any official Mercedes brand entity. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed for fitment only and does not alter vehicle performance, emissions, or warranty status. Always verify fitment with your vehicle's specific model year and chassis code before purchase. Installation requires mechanical competency; professional installation is recommended if you lack automotive experience.

Victorious · Automotive · Keychain FORAUTO Wrench Key Chain – Premium Stainless Steel Spanner EDC Lightweight, durable stainless steel wrench keychain for everyday carry and vehicle maintenance access. Stainless Steel 6.5cm Length EDC Accessory FORAUTO Brand Spanner Design Overview For Land Rover, Range Rover, and Defender owners who take pride in their vehicles and their gear, every detail matters—including the tools you carry. This FORAUTO Wrench Key Chain is engineered as a practical EDC (everyday carry) accessory that combines form and function. Whether you're tending to your vehicle on the road or need a compact spanner within arm's reach, this keychain delivers reliable, no-fuss access. Built from premium stainless steel, this 6.5cm wrench keychain resists corrosion and weathering—essential for owners who frequently venture off-road or into challenging environments. At just 0.5g, it adds virtually no weight to your key ring or equipment bag, yet provides the mechanical advantage of a proper spanner when you need it most. The compact profile and durable construction make it an ideal companion for adventure, maintenance work, and everyday utility. Keep one on your keyring, toss one in your vehicle's glove box, or attach it to a carabiner on your adventure pack. It's the kind of small, thoughtful accessory that separates properly equipped enthusiasts from everyone else. What's Included 🔧 Wrench Key Chain FORAUTO Model 10759, premium stainless steel 📦 Packaging Secure retail packaging, ready to gift or deploy Product Highlights Precision-machined stainless steel construction for durability and corrosion resistance Lightweight design at 0.5g—barely noticeable on your keyring Functional spanner profile suitable for common fasteners and adjustments Compact 6.5cm × 2cm footprint for pocket or glove-box storage FORAUTO premium brand with reputation for automotive accessories Ideal EDC companion for overlanders, mechanics, and off-road enthusiasts Weather-resistant materials withstand rain, mud, and salt exposure Clean, minimal design that complements professional tool kits Versatile attachment—keyring, carabiner-compatible, or standalone carry Affordable, replaceable tool for multi-unit ownership or gifting Compatibility & Specifications Specification Detail Brand FORAUTO Model 10759 Item Type Key Ring / Spanner Material Premium Stainless Steel Length 6.5cm Width 2cm Weight 0.5g Finish Polished stainless steel Vehicle Compatibility Universal Compatible with all Land Rover, Range Rover, Defender, Discovery, Toyota Land Cruiser, Mercedes-G Class, and most automotive applications. Universal design works across all year ranges and trim levels. Installation & Deployment Getting Started Inspect the keychain. Remove from packaging and verify the stainless steel construction and spanner profile are undamaged. Choose your attachment method. Attach directly to an existing keyring, loop through a carabiner, or carry standalone in a pocket or glovebox. Position for access. Keep it where you're most likely to need it—vehicle key ring, equipment bag, or adventure pack. Test the function. Verify the spanner profile engages properly with common fasteners before relying on it in critical situations. Maintain regularly. Wipe clean after exposure to mud, salt, or moisture. Stainless steel resists corrosion but benefits from occasional care. Note: This wrench keychain is designed for light-duty, emergency, or supplementary use. For heavy mechanical work or primary tool kits, use full-size wrenches and professional-grade tools. Always ensure fasteners are properly tightened before driving or load-bearing applications. Ready to Upgrade Your EDC? Add this premium FORAUTO Wrench Key Chain to your vehicle setup, adventure pack, or gift collection. It's the small, thoughtful accessory that separates prepared owners from the rest. Add to Cart Use code 22GET20 for 20% off any 2 items. 4.9/5 · 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Defender, Toyota, Mercedes-Benz, or their parent companies. All trademarks, model names, and vehicle references are used for identification and compatibility purposes only. Product descriptions are for general informational use and do not constitute professional mechanical or technical advice. Always consult your vehicle's official service manual or a qualified technician for maintenance, repair, and installation guidance.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Front Centre Grille Hood Insert for Range Rover Vogue L405 (2014–2017) – Gloss Black Bumper Upgrade A precision-formed ABS grille insert that replaces the factory front bumper centre trim with a sharper, more aggressive aesthetic — engineered to fit your 2014–2017 Range Rover Vogue L405 without modification. Range Rover Vogue L405 2014–2017 ABS Construction Gloss Black Direct Replacement Front Bumper Hood Insert No Drilling Required Exterior Styling Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that rewards considered modifications with a look that genuinely distinguishes itself from the factory standard. The front fascia, in particular, is one area where subtle upgrades deliver outsized visual impact. The centre grille insert sits at the heart of that first impression. This Front Centre Grille Hood Insert is designed specifically for the 2014–2017 Range Rover Vogue L405 facelift generation. Formed from durable ABS thermoplastic and finished in a deep gloss black, it replaces the factory bumper centre surround with a cleaner, more assertive profile. The result is a more cohesive front-end appearance — particularly effective on vehicles already running black pack trim, darkened badges, or upgraded alloy wheels. The fitment is engineered as a direct replacement, meaning no cutting, drilling, or permanent modification to your vehicle. Installation is clean and reversible — making this an ideal first step in a broader exterior styling programme, or simply a standalone refresh for owners looking to modernise the Vogue's front end without straying from its inherent elegance. What's Included 🔲 Front Centre Grille Insert Gloss black ABS — qty 1, pre-formed to OEM profile 📄 Installation Guide Step-by-step fitting instructions included 🔩 Mounting Hardware Clips and fixings for secure, rattle-free attachment Product Highlights Designed exclusively for Range Rover Vogue L405 (2014–2017) — no universal fitment compromises Deep gloss black ABS finish complements black pack, dark chrome, and stealth styling packages Direct OEM-replacement fit — installs into existing mounting points without modification Lightweight yet rigid ABS thermoplastic construction withstands road vibration and weather exposure Enhances the front fascia with a more purposeful, contemporary aesthetic Fully reversible installation — original grille can be refitted at any time No specialist tools or workshop equipment required for fitting UV-stabilised finish resists fading and surface degradation over time Pairs naturally with gloss black badge overlays, window tint, and black alloy upgrades Clean, factory-level finish from the front — no visible fixings or gaps when installed correctly Compatibility Vehicle Code Year Range Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Vogue L405 2013 (pre-facelift) Verify Before Order Range Rover Vogue L405 2018–2021 (facelift) Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Park the vehicle on a flat surface with the engine off and fully cooled. Ensure you have adequate lighting and clear access to the front bumper. Carefully locate and remove the factory front bumper centre grille insert by releasing the OEM retaining clips — use a trim removal tool to avoid scratching surrounding surfaces. Fully remove the original insert and set aside. Clean the mounting area with a damp cloth and allow to dry before fitting the new grille. Align the new gloss black grille insert into the bumper aperture, ensuring all mounting tabs are correctly seated in their corresponding clip positions. Apply firm, even pressure across the grille face to engage all retaining clips until you hear or feel them click into place. Check for any gaps or flex along the perimeter. Step back and inspect the fitment from multiple angles under good light before considering the installation complete. No adhesive is required. ⚠ Please Note: Confirm your exact model year and bumper variant before purchasing. The 2013 pre-facelift L405 uses a slightly different front bumper profile that may not accept this insert without modification. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Vogue's Front End Thousands of Range Rover owners trust Victorious Automotive for exterior upgrades that look factory-correct and fit without compromise. Browse our full Range Rover Vogue L405 collection for complementary styling pieces — or call our specialists if you need guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment and compatibility purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Front Grille Upgrades SVR Style Front Centre Grille for Range Rover Sport L494 (2014–2017) Instantly elevate the front-end presence of your Range Rover Sport with an SVR-inspired centre grille — precision-engineered for a factory-accurate fitment on 2014–2017 L494 models. Range Rover Sport L494 2014–2017 SVR Style Front Centre Grille Direct Fit Premium ABS No Cutting Required Exterior Upgrade Overview The Range Rover Sport L494 is one of the most visually dynamic SUVs on the road — and the front grille is central to that identity. Whether you're refining a facelift model or giving your pre-facelift Sport a contemporary edge, the front centre grille is one of the first things anyone notices. The standard grille does its job, but it leaves performance character on the table. This SVR Style Front Centre Grille is designed to replicate the aggressive, purposeful aesthetic of the Range Rover Sport SVR — bringing that motorsport-derived front-end language to standard and SE-spec L494 models from 2014 through to 2017. Constructed from high-grade ABS polymer, it is finished to exacting standards and engineered to clip directly into the factory aperture without any modification to your vehicle's bodywork. For Sport owners who want their vehicle to look the part without a full body kit, this grille is one of the most impactful and cost-effective upgrades available. The transformation is immediate, and the fitment is precise enough that most observers will simply assume it came from the factory. At Victorious, we supply only components that meet the quality expectations of the vehicles they're made for — this grille is no exception. What's Included 🔲 SVR Style Centre Grille One front centre grille panel, ready to install 📄 Installation Instructions Step-by-step guide included in the box 🔩 Fitting Hardware All clips and fasteners required for installation 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights SVR-inspired design for an aggressive, motorsport-influenced front end Precision-engineered for direct OEM-style fitment on L494 2014–2017 High-grade ABS polymer construction for durability and impact resistance No cutting, drilling, or permanent modifications required Retains factory sensor and camera compatibility where applicable UV-stabilised finish to resist fading, cracking, and weathering Designed to match factory panel gaps and alignment tolerances Significant visual upgrade with minimal installation effort Lightweight construction — no added weight to the front end Compatible with standard, SE, HSE, and Dynamic trim levels Compatibility Vehicle Year Range Trim Fitment Range Rover Sport L494 2014–2017 Standard / SE Direct Fit Range Rover Sport L494 2014–2017 HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2017 Autobiography Direct Fit Range Rover Sport L494 2014–2017 SVR (Factory) Not Required Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Defender L663 2020–2026 All Trims Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, soft cloth Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet and secure it in the open position. Using a plastic trim removal tool, carefully release the retaining clips securing the original front centre grille. Work methodically from one side to the other to avoid cracking the surrounding bumper trim. Gently pull the existing grille forward and away from the bumper aperture. Set it aside on a soft cloth to avoid scratching either the grille or your paintwork. Check the aperture for any debris or clips that may have broken free during removal. Replace any damaged OEM clips before proceeding. Align the new SVR Style Centre Grille with the aperture, ensuring the mounting tabs are correctly seated before applying pressure. Press firmly and evenly across the grille face until all retaining clips engage with an audible click. Check alignment from both sides before closing the bonnet. Step back and inspect the panel gaps. If any section appears misaligned, release and re-seat the relevant clip rather than forcing fitment. ⚠ Important: Verify your exact model year and trim level before purchasing. The 2014–2017 pre-facelift L494 Sport has a different grille aperture to the 2018+ facelift variant. If you are unsure of your build date, check the VIN plate inside the driver's door jamb or contact us at +44 203 943 9919 before ordering. Upgrade Your Sport. Elevate Your Standard. The SVR grille look is one of the most recognisable upgrades you can make to a pre-facelift Range Rover Sport — and this is the cleanest way to achieve it. Explore the full range of L494 Sport accessories at Victorious and build the exact specification you want. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover · Front Grilles Front Mesh Grille for Range Rover 2018–2019 — Black & Silver ABS Upgrade A precision-engineered mesh front grille that refreshes the face of your 2018–2019 Range Rover with a sharper, more aggressive stance — without compromising fit or finish. Range Rover 2018–2019 Direct Fit ABS Construction Black & Silver Mesh Design No Drilling Required Racing Grille Style Exterior Styling Overview The 2018–2019 Range Rover is already one of the most commanding presences on the road — an icon of British engineering that blends luxury with genuine capability. But for owners who want their vehicle to reflect a more purposeful, contemporary aesthetic, the factory grille can feel understated. This mesh front grille replacement is designed specifically for those who want to sharpen the visual signature of their Range Rover without embarking on a full bodywork project. Manufactured from high-grade ABS polymer, this grille is built to withstand the rigours of daily use — resistant to UV degradation, minor road debris impact, and the thermal stress that comes with year-round driving. The black and silver mesh finish is clean and considered, sitting sympathetically alongside the existing chrome and body-coloured trim lines of the 2018–2019 model year rather than clashing with them. Fitment is designed to be a direct replacement for the original grille assembly, using existing mounting points for a seamless, rattle-free result. No specialist tools or modifications to the bumper structure are required. If you're comfortable with basic trim removal, this is a genuine weekend upgrade that transforms how your Range Rover looks at the kerb — and on the road. What's Included 🔲 Front Mesh Grille Pre-finished in black & silver, individually packed and ready to fit 📦 Protective Packaging Individually boxed to prevent transit damage 📋 Fitting Guidance General installation instructions included Note: Front badge / emblem is not included. Existing badge from your original grille can be transferred where compatible. Product Highlights Precision-engineered for a direct OEM-style fit on 2018 and 2019 Range Rover models High-grade ABS construction — lightweight, impact-resistant and UV stable Black and silver finish complements factory chrome and body trim lines Contemporary mesh pattern adds a sportier, more aggressive front-end character No drilling, cutting or permanent modifications required for installation Uses existing mounting points for a secure, vibration-free fitment Aerodynamically neutral design — no negative effect on cooling or airflow Easy to clean and maintain alongside standard exterior wash routines Shipped individually packed to arrive in showroom condition Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Year Range Trim / Variant Fitment Range Rover Vogue (L405) 2018–2019 SE, HSE, Autobiography, SVAutobiography Direct Fit Range Rover Vogue (L405) 2013–2017 All Variants Verify Before Purchase Range Rover Vogue (L405) 2020 All Variants Verify Before Purchase Range Rover Sport (L494) 2018–2019 All Variants Not Compatible Range Rover Velar 2018–2019 All Variants Not Compatible Range Rover Vogue (L460) 2022–2026 All Variants Not Compatible Defender (L663) 2020–2026 All Variants Not Compatible If your exact model year or build is not listed above, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. We're happy to confirm fitment. Installation Notes 🔧 Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tool, flathead screwdriver, clean cloth Ensure the vehicle is parked on a flat, stable surface with the engine off and cooled down. Open the bonnet for easier access to upper grille mounting points. Using a plastic trim removal tool, carefully unclip the factory grille from the front bumper assembly. Work from one edge inward to avoid cracking the surround — do not force any clips. Disconnect any wiring if applicable (e.g. sensors or camera harnesses routed behind the grille). Note the connector positions before removal. Remove any badges or emblems from the original grille that you wish to transfer. Set them aside in a safe location. Align the new mesh grille with the factory mounting points. Press firmly and evenly along each clip until you hear and feel it seat fully — check each point twice. Reattach any wiring connectors that were disconnected in Step 3. Ensure no cables are pinched or tensioned behind the grille. Refit any badges you wish to carry over. Step back and visually confirm panel alignment with the bumper and bonnet line before closing the bonnet. ⚠ Important: The front badge is not included with this grille. If your original badge uses adhesive backing, it may not transfer cleanly — have a suitable adhesive promoter available. If you are not confident with trim removal, we recommend having the grille fitted by a detailer or bodyshop to protect surrounding panels. Complete Your Range Rover's Look Thousands of Range Rover owners across the UK and worldwide trust Victorious Automotive to supply the parts that make a real difference — parts that fit properly, look the part, and last. Browse our full Range Rover Vogue collection for complementary exterior upgrades. Shop Range Rover Vogue Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styled accessories for Land Rover, Range Rover and Defender vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle build before purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Range Rover Vogue 2018–2020 Full Autobiography Exterior Pack (L405) Transform your L405 Vogue into a full Autobiography-specification presence with this precision-fitted five-piece exterior styling pack — finished in gloss black and silver. L405 Vogue 2018–2020 Autobiography Style ABS Construction Black + Silver Finish 5-Piece Kit No Drilling Required Direct Fit Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs ever built — a vehicle that carries its presence with quiet authority. From its 2018 facelift through to the final 2020 production year, the L405 platform refined an already exceptional formula, and for owners who want their exterior specification to reflect the pinnacle Autobiography grade, this exterior pack delivers exactly that. This Full Autobiography Exterior Pack is engineered as a complete five-piece styling upgrade that mirrors the visual language of the factory Autobiography trim. The kit covers the front grille surround, mesh side vents, side grille inserts, and rear door trim moulding — five carefully considered components that together create a cohesive, elevated look across the vehicle's exterior. The dual-tone black and silver finish complements both lighter and darker factory body colours with equal effect. Constructed from high-grade ABS — the same class of material used in OEM exterior trim — each piece is moulded to match factory panel lines with precision. The result is a finish that reads as factory-fitted rather than aftermarket, which is exactly what the most discerning Range Rover owners expect. Installation requires no drilling or permanent modification, making this one of the most impactful and reversible exterior upgrades available for the 2018–2020 L405. What's Included 🔲 Front Grille Surround Autobiography-style gloss black and silver finish 🔳 Mesh Side Vents Precision-cut mesh inserts, left and right ▪️ Side Grille Inserts Replaces standard side grille trim pieces 🚪 Rear Door Trim Moulding Kit Completes the Autobiography exterior look at the rear 📦 Fitting Hardware All necessary clips and adhesive included Product Highlights Replicates factory Autobiography exterior specification High-grade ABS construction for durability and rigidity Gloss black and silver dual-tone finish throughout Five-piece complete kit — front, sides, and rear covered No drilling or permanent modification required Direct panel-line fitment for an OEM-quality appearance Brand new — supplied in original packaging Resistant to UV fading and standard road conditions Compatible with both standard and long-wheelbase L405 Reversible installation — original trim fully restorable Compatibility Vehicle Year Range Trim Grade Fitment Range Rover Vogue L405 2018–2020 Vogue / SE / HSE Direct Fit Range Rover Vogue L405 2018–2020 Autobiography (factory) Not Required Range Rover Vogue L405 2013–2017 (Pre-facelift) All Grades Not Compatible Range Rover Sport L494 2013–2022 All Grades Not Compatible Range Rover Vogue L460 2022–2026 All Grades Not Compatible Range Rover Velar 2018–2022 All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tool, clean microfibre cloth Thoroughly clean all exterior trim areas where the new pieces will be fitted. Remove any wax, grease, or polish residue using an isopropyl alcohol wipe to ensure strong adhesion. Using a plastic trim removal tool, carefully unclip and remove the existing front grille surround trim from the vehicle. Work gently from each corner inward to avoid stressing the factory clips. Align the new Autobiography-style front grille surround and press firmly into the factory clip positions until all retention points are fully seated and flush. Remove the existing mesh side vent covers from both the driver and passenger sides. Fit the new mesh vent inserts by aligning the tabs and pressing into place — no adhesive required for these pieces. Replace the side grille inserts by unclipping the originals and snapping the new inserts into position. Check alignment against the body panel before applying full pressure. Fit the rear door trim moulding kit by peeling the protective backing from the adhesive strip, aligning carefully with the existing factory trim line, and pressing firmly across the full length for 30 seconds to ensure bonding. Step back and visually inspect all five pieces for alignment and fitment. Apply light pressure to any panel that does not sit fully flush. ⚠ Important: This kit is designed exclusively for the 2018–2020 L405 Range Rover Vogue post-facelift. Attempting to fit this pack to pre-facelift or alternative models may result in poor fitment. Always confirm your vehicle's production year before installation. Fitting in temperatures below 10°C may reduce adhesive performance — allow the vehicle to warm in a garage before fitting if necessary. Elevate Your L405 to Autobiography Standard For 2018–2020 Range Rover Vogue owners, this is one of the most complete and visually impactful exterior upgrades available. Browse our full L405 collection for complementary interior and exterior accessories. Shop All L405 Vogue Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Grille & Vent Set — Range Rover Sport L494 (2018–2020) A precision-engineered carbon fibre styling upgrade that sharpens the front fascia of your Range Rover Sport with an assertive, motorsport-inspired presence. Range Rover Sport L494 2018–2020 Carbon Fibre Finish ABS Construction Direct Fit Grille & Vent Set Exterior Styling No Drilling Required Overview The Range Rover Sport L494 in its 2018 facelift guise already commands attention — but for owners who demand more, the standard plastic grille and vent surrounds can feel underwhelming next to the vehicle's broader capability and character. This is particularly true for Sport owners running SVR-style bodywork, Dynamic or HSE trims, where the front end benefits most from a stronger visual anchor. This Carbon Fiber Grille and Vent Set is designed as a direct replacement for the factory front grille surround and lower vent trim on the 2018 and newer Range Rover Sport L494. Constructed from waterproof, high-impact ABS with a carbon fibre-effect finish, it replicates the visual depth and texture of real weave carbon without the fragility or premium cost associated with dry carbon components. The result is a front end that reads as more aggressive, more purposeful, and more refined — all at once. Every dimension of this set has been developed to match OEM mounting points precisely. No cutting, drilling, or modification to your vehicle's bodywork is required. Whether you're building a full exterior transformation or simply looking for one high-impact change to the front of your Sport, this grille and vent set delivers a genuine visual step-up that holds up in person as well as it does in photographs. What's Included 🔲 Front Grille Surround Carbon fibre-finish ABS, main grille frame piece 🔳 Lower Vent Trim Set Matching lower bumper vent inserts, full pair 📄 Installation Guide Step-by-step fitting reference included 🔩 Mounting Hardware OEM-compatible clips and fixings where required Product Highlights Designed specifically for the 2018–2020 Range Rover Sport L494 facelift High-quality ABS construction with durable carbon fibre-effect surface finish Direct OEM replacement — no cutting, drilling, or bodywork modification Waterproof and UV-resistant for long-term exterior use in all climates Full grille and vent coverage for a cohesive, factory-finished appearance Lightweight fitment — no impact on vehicle weight distribution or aerodynamics Compatible with standard, Dynamic, HSE, and SVR-spec bumper configurations 100% brand new — never used, never refurbished Backed by Victorious Automotive's 30-day money-back guarantee Ships worldwide via DHL, FedEx, UPS, and TNT with full tracking Compatibility Vehicle Year Range Trim / Notes Fitment Range Rover Sport L494 2018–2020 SE, HSE, Dynamic, Autobiography Direct Fit Range Rover Sport L494 2018–2020 SVR Direct Fit Range Rover Sport L494 2013–2017 Pre-facelift models Not Compatible Range Rover Sport L461 2022–2026 All trims — different platform Not Compatible Range Rover Vogue L405 2013–2020 Different grille architecture Not Compatible Range Rover Velar 2018–2022 Different grille architecture Not Compatible Not sure which model year you have? Check your V5C or VIN plate — or call us on +44 203 943 9919 and we'll confirm compatibility before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tool, plastic pry bar, soft cloth With the vehicle parked and cooled, open the bonnet and ensure the front bumper area is clean and free of debris before beginning. Using a plastic trim removal tool, carefully release the OEM grille surround clips from the front bumper assembly, working from one side to the other to avoid stress fractures on the surrounding trim. Disconnect any ambient air temperature sensors or adaptive cruise radar connections if routed through the grille area, labelling each connector for reassembly. Remove the factory vent insert trims from the lower bumper section using the same clip-release technique, taking care not to scratch the bumper paint surface. Dry-fit the new carbon fibre grille surround and vent trims before final installation to confirm alignment and clip engagement at all mounting points. Press each component firmly and evenly into position until all clips audibly engage. Reconnect any sensors or connectors disconnected during removal. Step back and inspect the finished fitment from the front and side for panel gaps, alignment consistency, and flush finish before closing the bonnet. ⚠ Note: If your vehicle features an active grille shutter system or integrated radar hardware, we recommend having installation completed by a qualified Land Rover technician to avoid disruption to driver assistance systems. Always verify component alignment before driving. Upgrade Your Sport. Elevate Your Standard. Trusted by over 12,300 Range Rover and Land Rover owners worldwide, Victorious Automotive is the specialist choice for exterior upgrades that fit properly, look exceptional, and last. Browse the full Range Rover Sport L494 collection or get in touch — our team knows these vehicles inside and out. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Land Rover Range Rover · Paddle Shifters Land Rover Range Rover Carbon Fiber Paddle Shifters — L405 / L494 / L460 / L461 (2013–2023) A direct-fit, no-drill upgrade that brings genuine carbon-effect tactility and sport-cabin presence to every gear change in your Range Rover. L405 · L494 · L460 · L461 2013–2023 Carbon Fiber Effect ABS Construction Peel & Stick Fit Interior Upgrade No Drilling Required Pair Included Overview The Range Rover's interior already sets a benchmark for luxury SUV refinement — but for the enthusiast who also drives with intent, the factory paddle shifters can feel like a missed opportunity. Whether you're threading through mountain switchbacks in a Sport L494, commanding a motorway in a Vogue L405, or settling into the cabin of a new L460 or L461, the paddle shifters are your most tactile point of driver engagement. They deserve to look and feel the part. These carbon fiber paddle shifter covers from Victorious Automotive are precision-formed to clip directly over your existing Range Rover paddle shifters, adding a bold gloss carbon-effect finish and a noticeably thicker, more substantial grip. The transformation is immediate — both visually and through your fingertips. The sleek layered carbon pattern complements dark, light, and SVAutobiography-spec interiors equally well, elevating the cabin without a single permanent modification. Constructed from durable ABS plastic with a high-fidelity carbon fiber surface effect, these covers are engineered to withstand daily use, temperature fluctuation, and the kind of repeated contact that comes with spirited driving. Installation takes under five minutes and requires no tools whatsoever — making this one of the most impactful-per-effort upgrades available for your Range Rover interior. What's Included 🏎️ Left Paddle Shifter Cover Carbon fiber effect, gloss finish — downshift side 🏎️ Right Paddle Shifter Cover Carbon fiber effect, gloss finish — upshift side 🔧 Pre-Applied 3M Adhesive Factory-fitted tape for secure, residue-free bonding 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Direct-fit design engineered specifically for Range Rover paddle geometry High-gloss carbon fiber effect surface for an authentic performance aesthetic Noticeably thicker profile adds tactile confidence during gear changes Pre-applied 3M-grade adhesive for a secure, lasting bond Zero drilling, zero cutting — completely reversible installation Durable ABS core resists flex, heat, and repeated contact over time Compatible with all trim levels including SE, HSE, Autobiography, and SVR Seamlessly complements other carbon fiber interior upgrades Gloss finish maintained with standard interior detailing products Covers ship as a matched pair — left and right included as standard Compatibility Model Generation / Code Years Fitment Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L460 2022–2023 Direct Fit Range Rover Sport L461 2022–2023 Direct Fit Range Rover Velar L560 2018–2023 Verify Before Purchase Range Rover Evoque L551 / L538 2011–2023 Not Compatible Land Rover Defender L663 2020–2023 Not Compatible Land Rover Discovery 5 L462 2017–2023 Not Compatible Installation Notes ⏱ Estimated Time: 3–5 Minutes  ·  🔧 Difficulty: Beginner  ·  🛠 Tools Required: None Begin with the vehicle stationary and the steering wheel in the neutral (straight-ahead) position for easiest access to both paddles. Clean the surface of your existing paddle shifters thoroughly using an isopropyl alcohol wipe or a lint-free cloth. Allow to dry completely — even residual moisture or oils will affect adhesion. Peel the protective film from the pre-applied adhesive on the back of the carbon fiber cover, taking care not to touch the adhesive surface. Align the cover carefully over the existing paddle, starting from the top edge and working downward to avoid air pockets or misalignment. Press firmly across the entire surface for 30–60 seconds to activate the adhesive bond. Pay extra attention to the edges and corners. Repeat for the second paddle. Allow 30 minutes before driving to ensure a full initial set of the adhesive. ⚠ Important: Do not apply in temperatures below 10°C (50°F) as this will reduce adhesive performance. If removing the covers, use a plastic trim removal tool and apply gentle heat from a hairdryer to soften the adhesive — never force or pull sharply, as this may mark the underlying factory paddle surface. Shop by Your Range Rover Browse the full range of interior and exterior accessories curated specifically for your vehicle generation: 🚙 Range Rover Vogue L405 2013–2021 accessories 🚙 Range Rover Sport L494 2013–2022 accessories 🚙 Range Rover Vogue L460 2022–2026 accessories 🚙 Range Rover Sport L461 2022–2026 accessories Upgrade Your Range Rover Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium, precision-fit accessories. Worldwide shipping via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Images are for illustrative purposes only.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Side Vents for Range Rover Sport L494 (2013–2020) A bold, factory-finish upgrade that transforms the Sport's front quarter profile with a deep gloss black contrast — no cutting, no drilling, no compromise. Range Rover Sport L494 2013–2020 High Gloss Black ABS Direct OEM Fit Clip-On Installation Exterior Styling Side Vent Covers Pair Included Overview The Range Rover Sport L494 is one of Land Rover's most dynamic and visually assertive models — a vehicle designed to command attention on road and track alike. Its front quarter panel vents are a defining design cue, one of the first elements the eye is drawn to. The stock silver or body-coloured finish works well from the factory, but for owners who want a sharper, more purposeful aesthetic, the contrast of high gloss black is a compelling evolution. These High Gloss Black Side Vent covers are engineered specifically for the Range Rover Sport L494 generation, produced between 2013 and 2020. Manufactured from premium ABS plastic and finished to an automotive-grade high gloss, they overlay your existing side vents with a seamless, factory-looking result. The deep black finish adds a level of visual depth and aggression that complements both standard Sport trims and blacked-out custom builds equally well. Unlike paint-matched or wrapping alternatives, these covers require no bodywork, no adhesives, and no professional fitting. They clip directly onto your existing vents using the original mounting points, giving you a clean, rattle-free result in under an hour. Whether you're building a full stealth spec or simply looking to break up the body colour with a precision detail, these vents deliver a premium finish with none of the complexity. What's Included 🖤 High Gloss Black Side Vents Supplied as a matched pair — driver and passenger side 🔩 OEM-Style Mounting Clips Pre-fitted clips for secure, tool-free attachment 📋 Fitting Guide Step-by-step installation reference included 🛡️ Protective Packaging Foam-lined box to ensure finish is protected in transit Product Highlights High gloss black ABS finish — automotive-grade depth and clarity Manufactured specifically for Range Rover Sport L494 (2013–2020) Supplied as a pair — driver and passenger side included Clip-on fitment using OEM mounting points — no drilling required No adhesives, no heat tools, no professional fitting needed UV-stabilised material — resists fading, cracking and discolouration Precise panel-to-panel flush fit — clean, factory-standard look Complements blacked-out builds, dark packs and stealth specs Reversible — original vents can be reinstated at any time Compatible with all trim levels including SE, HSE, SVR and Autobiography Compatibility Vehicle Generation / Code Years Fitment Range Rover Sport SE L494 2013–2020 Direct Fit Range Rover Sport HSE L494 2013–2020 Direct Fit Range Rover Sport HSE Dynamic L494 2013–2020 Direct Fit Range Rover Sport SVR L494 2015–2020 Direct Fit Range Rover Sport Autobiography L494 2013–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–40 minutes  |  🔧 Tools Required: None Ensure your Range Rover Sport is parked on a level surface and the engine is off. Allow the vehicle to cool if recently driven. Gently clean the existing factory side vent panels with a microfibre cloth to remove any dust, wax or debris that could affect fitment alignment. Carefully flex the original vent panel slightly to locate the OEM clip positions — these are the same anchor points used by the new covers. Align the high gloss black vent cover over the factory vent, ensuring the edges sit flush with the surrounding bodywork before pressing into position. Apply firm, even pressure across the face of the cover until you feel and hear each clip engage securely. Do not force — the fit should be smooth and positive. Repeat the process on the opposite side. Step back and inspect both vents for alignment and panel-flush consistency before driving. ⚠ Note: Avoid installation in temperatures below 5°C — cold ABS can be less flexible and may affect clip engagement. If fitting in cold conditions, allow the covers to acclimatise to room temperature for 30 minutes beforehand. Do not use excessive force at any stage of installation. Upgrade Your Sport. Elevate Every Detail. At Victorious Automotive, every accessory we supply is chosen for owners who demand precision, quality and a finish that reflects the vehicle they drive. These side vents are a small change with a significant visual impact — exactly the kind of detail that sets a well-specced Sport apart from the rest. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or in any way connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners. Product imagery is for illustrative purposes — actual finish may vary slightly depending on screen calibration and ambient lighting conditions.

Victorious · Range Rover Sport L494 · Interior Styling Carbon Fiber Style Door Lock and Memory Trims for Range Rover Sport 2014–2017 Premium interior styling with authentic carbon fiber finish and seamless installation. L494 2014–2017 Carbon Fiber Style Door Lock Trim Memory Button Trim Peel & Stick Overview If you own a Range Rover Sport from 2014 to 2017 (L494), you know the importance of interior finishes. Every detail matters—from the leather seats to the smallest trim piece. These Carbon Fiber Style Door Lock and Memory Trims are engineered to elevate your cabin's visual appeal without requiring professional installation or modification. Crafted from premium ABS plastic with an authentic carbon fiber weave finish, these trims replace the standard door lock housings and memory button surrounds with aggressive, contemporary styling that complements modern Range Rover design language. Whether you're refining an L494 with cosmetic upgrades or building a comprehensive interior refresh, these pieces deliver impact with subtlety. The installation is straightforward: precision-engineered fitment combined with industrial-grade double-sided adhesive means no drilling, no glue residue, and no permanent modification to your vehicle. This is true bolt-on enhancement. What's Included 🎨 Door Lock Trims Set of carbon fiber door lock housings (driver & passenger) 🔘 Memory Button Trims Memory seat adjustment button surrounds (driver-side) 🔧 Double-Sided Adhesive Pre-applied for secure, peel-and-stick application 📦 Protective Packaging All items arrive pristine and ready to install Product Highlights Carbon Fiber Finish: Authentic woven pattern, not printed or laminated Precision Fit: Custom-engineered for 2014–2017 Range Rover Sport (L494) Premium ABS Material: Rigid, impact-resistant, UV-stable Peel & Stick Installation: Double-sided adhesive—no tools required Zero Damage: Non-permanent, 100% reversible fitment Brand New Condition: Factory-sealed packaging with protective film Easy Cleaning: Microfiber cloth friendly, resists dust and fingerprints Comprehensive Coverage: Door locks (both sides) + memory button surrounds OEM Appearance: Seamlessly integrates with Range Rover Sport interior design Professional Quality: Sourced and tested by Victorious Automotive Compatibility & Fitment Model Variant Year Range Fitment Status Range Rover Sport L494 (Standard) 2014–2017 Direct Fit Range Rover Sport L494 (HSE, HST, Autobiography) 2014–2017 Direct Fit Range Rover Sport L494 (SVR) 2014–2017 Direct Fit Range Rover Sport L460 (New Generation) 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Guide Difficulty: Beginner | Time: 15–20 minutes Preparation: Open driver and passenger doors. Inspect door lock housings and memory button surrounds for dust or debris. Clean with a soft, dry cloth. Positioning: Carefully peel back the protective film from the first trim piece. Position it over the door lock housing, ensuring alignment with the surround. Adhesive Application: Once positioned, press firmly from the center outward for 10–15 seconds to activate the double-sided adhesive. Hold steady pressure for best results. Repeat Process: Apply the second door lock trim to the opposite door using the same method. Follow with memory button trim on the driver-side panel. Final Check: Allow 2–3 hours for adhesive to fully cure before closing doors. Avoid touching the newly installed trims during this period. Enjoy: Your Range Rover Sport now features factory-style carbon fiber accents throughout the cabin. ⚠ Important: Ensure your vehicle's interior surfaces are clean and dry before application. Do not install over existing trim without removal. If removal is needed later, gently peel away using a heat gun set to low temperature to soften the adhesive. Why Victorious Automotive? We specialise in Range Rover and Land Rover accessories. Every product in our catalog is tested for fitment, durability, and authenticity. We stand behind our work with a 30-day money-back guarantee—if these trims aren't right for your L494, we'll process a full refund, no questions asked. Ready to Refine Your Range Rover Sport? Elevate your L494's interior with carbon fiber styling that commands attention. Discover the difference precision engineering and quality materials can make. Shop Range Rover Sport Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping (DHL, FedEx, UPS, TNT) 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) ✓ 30-day money-back guarantee Disclaimer: Victorious Automotive is an independent accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket customisation only and does not affect vehicle warranty unless installation causes direct damage to OEM components.

Victorious Automotive · Land Rover Discovery 5 & Range Rover · Exterior Trim Carbon Fiber Door Handle Covers for 2017–2021 Land Rover Discovery 5 & Range Rover A precision-fit carbon fiber upgrade that transforms your door handles into a visual focal point — no paint, no professional fitting, no compromise. Discovery 5 L462 Range Rover L405 2017–2021 Real Carbon Fiber 3M Adhesive Fit UV Resistant Set of 4–8 No Drilling Overview The 2017–2021 Land Rover Discovery 5 and Range Rover are vehicles built with a clear design language — commanding, considered, and refined. The door handles, while functional, are one of the few exterior details that benefit most from a well-chosen upgrade. These carbon fiber door handle covers are engineered specifically for that purpose: to close the gap between factory specification and the kind of finish that turns heads at a standstill. Each cover is crafted from genuine carbon fiber with a high-gloss lacquer finish, capturing the distinctive woven texture that carbon fibre enthusiasts expect. Lightweight by nature yet rigid under daily use, the material resists UV degradation, moisture ingress, and the kind of road debris that dulls lesser finishes over time. The result is a component that looks purposeful and performs quietly — exactly how a Land Rover owner prefers it. Fitment is handled via pre-applied 3M automotive-grade adhesive tape, meaning the entire installation process takes place on your driveway without tools, specialists, or risk to your vehicle's paintwork. Whether you're refining a daily driver or building a specification-level Discovery 5, these covers deliver a noticeable visual step-up with minimal effort required. What's Included 🪶 Carbon Fiber Door Handle Covers Set of 4–8 covers depending on configuration; genuine carbon fiber with gloss lacquer 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade 3M tape bonded to each cover for a clean, tool-free installation 📄 Installation Guide Step-by-step instructions for a professional finish from first attempt 🧹 Surface Prep Wipe Included cleaning wipe to degrease door handle surfaces prior to fitting Product Highlights Genuine carbon fiber construction — not ABS with carbon-look wrap High-gloss lacquer protects the weave and adds depth to the finish UV-resistant coating prevents fading, yellowing, or surface degradation Waterproof and resistant to road grime, bird lime, and light impacts Lightweight profile adds no meaningful weight to your door panels No drilling, cutting, or modification to your vehicle required 3M automotive adhesive provides a permanent, weather-proof bond Precision-moulded to follow the exact contour of Discovery 5 handles Compatible with both 4-door and extended configurations as applicable Brand new — supplied in protective packaging, ready to install Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2022 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 / L551 2011–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your vehicle in a dry, sheltered environment. A garage or covered driveway is ideal — avoid fitting in direct sunlight or cold temperatures below 10°C as this affects adhesive performance. Thoroughly clean each door handle with the included prep wipe, removing all grease, wax, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit each carbon fiber cover to its corresponding handle to confirm alignment and coverage. Each cover is shaped to a specific position — take a moment to familiarise yourself before committing. Peel the backing from the 3M adhesive tape on the underside of the first cover. Align the cover carefully to the handle, press firmly from the centre outward, and hold for 30–60 seconds to activate the bond. Repeat for all remaining covers. Do not wash the vehicle or expose the adhesive to water for at least 24 hours following installation to allow full cure. ⚠ Important: Confirm your exact vehicle variant and year of manufacture before ordering. Handle profiles can vary between model years and trim levels. If you are unsure of compatibility, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Upgrade Your Discovery or Range Rover Today Join over 12,300 verified Land Rover and Range Rover owners who trust Victorious Automotive for premium exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purposes of fitment identification. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Range Rover Vogue L405 & Sport L494 · Exterior Styling Carbon Fiber Side Mirror Covers — Range Rover Vogue & Sport 2014–2020 (L405 / L494) Precision laser-cut carbon fiber mirror covers that deliver a factory-sport aesthetic on your L405 Vogue or L494 Sport — no drilling, no modification, no compromise. L405 Vogue L494 Sport 2014–2020 Carbon Fiber TPU Direct Fit Adhesive Install Exterior Styling Pair Included Overview The Range Rover Vogue L405 and Sport L494 occupy a rare space — vehicles that are equally at home on a motorway cruise and a challenging green lane. Between 2014 and 2020, both platforms received progressive styling updates, but the standard mirror housings remained understated. For owners who want the exterior to reflect the performance potential within, the mirror covers are one of the most visible and immediately impactful upgrades available. These carbon fiber side mirror covers are engineered specifically for the L405 and L494 body contours. Each cover is precision laser-cut from high-quality carbon fiber TPU — a material chosen for its resistance to UV fading, surface cracking, and temperature cycling. The woven carbon weave pattern sits beneath a high-gloss clear coat layer, giving it depth and sheen that plain gloss black alternatives simply cannot replicate. The result is a finish that looks factory-fitted, not aftermarket. Installation is straightforward and reversible. The covers attach via pre-applied 3M-grade adhesive tape and follow the exact profile of the OEM mirror housing — no tools, no permanent fixings. Whether you're refreshing a standard-spec Vogue or complementing an SVR-bodied Sport, these covers integrate seamlessly into the vehicle's design language. What's Included 🪞 Carbon Fiber Mirror Cover × 2 Left & right pair — pre-matched for L405 / L494 contours 🔧 Adhesive Installation Tape Pre-cut 3M-grade tape strips for secure, residue-free bonding 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Precision laser-cut to match the exact mirror housing profile of the L405 and L494 High-quality carbon fiber TPU construction — UV stable and temperature resistant High-gloss clear coat finish — deep weave visible beneath protective layer No drilling, no modification — adhesive-only installation preserves OEM bodywork Pre-applied adhesive tape included — no separate purchase required Full left and right pair supplied — matched from the same production batch Lightweight construction — no added stress to mirror adjustment mechanisms Resistant to car wash, rain, and road debris at motorway speeds Compatible with both standard and towing mirror variants across the 2014–2020 range Reversible installation — can be removed cleanly without damaging OEM finish Compatibility Model Platform Years Fit Range Rover Vogue L405 2014–2020 Direct Fit Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Vogue SE L405 2014–2020 Direct Fit Range Rover Autobiography L405 2014–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Evoque L538 / L551 All Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  ·  🔧 Difficulty: Easy — No Tools Required Park the vehicle and ensure the mirror housings are fully dry and at ambient temperature — avoid installing in direct sunlight or below 10°C. Thoroughly clean both mirror housing surfaces using an IPA (isopropyl alcohol) wipe or panel wipe solution. Remove any wax, polish residue, or road film entirely. Allow the surface to dry completely for a minimum of 5 minutes before proceeding. Dry-fit each carbon cover to confirm alignment and positioning before committing to adhesion. Peel the adhesive backing from the tape strips and carefully align the cover to the mirror housing from the leading edge inward. Apply firm, even pressure across the full face of the cover for at least 30 seconds to activate the adhesive bond. Avoid washing the vehicle or exposing the mirrors to heavy rain for 24 hours post-installation to allow full cure. ⚠ Note: Ensure the mirror surface is completely free of wax, silicone, or detailing product residue before applying. Contaminated surfaces will significantly reduce adhesion strength and may cause lifting at speed. Upgrade Your Range Rover Today Join over 12,300 verified Range Rover and Land Rover owners who've trusted Victorious Automotive to elevate their vehicles. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop L405 Vogue Accessories Shop L494 Sport Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Land Rover · Range Rover Sport L320 · Body Styling Side Vents for Range Rover Sport L320 — 2005–2009 Aggressive Side Grille Styling Transform the flanks of your first-generation Range Rover Sport with race-inspired side vents that sharpen the L320's silhouette without lifting the bonnet. Range Rover Sport L320 2005–2009 ABS Plastic Direct Fit Racing-Style Grille Exterior Styling CCC Certified 1 kg Per Set Overview The Range Rover Sport L320, produced from 2005 to 2009, brought a new performance-forward identity to the Land Rover lineup. Its wide shoulder lines and muscular proportions were built to be noticed — and these side vent grilles are designed to take that presence a step further. Fitted to the front quarter panels or side body sections, they introduce a motorsport-influenced visual cue that sits entirely in keeping with the Sport's character. Constructed from high-grade ABS thermoplastic, these side vents are precision-moulded to follow the body lines of the L320 chassis. ABS is the material of choice for exterior automotive trim not by accident — it balances low weight with structural rigidity, resists UV degradation, and takes paint well, making it ideal for either an OEM finish match or a contrasting accent treatment. At 45cm in length and 1kg per set, the fitment feels substantial without adding unnecessary mass. Whether you're refreshing a high-mileage Sport or completing a more considered build, these vents deliver a clean, purposeful upgrade that reads as factory-considered rather than aftermarket-applied. The design language complements the L320's existing grille and bonnet vents to create a cohesive, performance-driven exterior aesthetic — exactly what a Sport should project. What's Included 🔲 Side Vent Grille Set Left and right pair, matched for symmetrical fitment 🔩 Mounting Hardware Clips and fixings suited to L320 body panels 📄 Fitment Guide Step-by-step installation reference 🛡️ Protective Packaging Foam-lined transit packaging for safe delivery Product Highlights Precision-moulded ABS plastic construction for accurate panel fit Designed specifically for Range Rover Sport L320 (2005–2009) Lightweight at 1kg per set — no impact on vehicle balance 45cm length provides a commanding visual presence on the flanks CCC certified — meets international quality compliance standards Racing grille design inspired by motorsport styling conventions UV-resistant material helps prevent fading and discolouration Paintable surface — finish to match or contrast your body colour No permanent modification required for fitment Sold as a complete pair for full symmetrical installation Compatibility Model Chassis Code Years Fitment Range Rover Sport L320 2005–2009 Direct Fit Range Rover Sport L320 (Facelift) 2010–2013 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Defender L663 All Years Not Compatible Installation Notes Difficulty: Beginner–Intermediate  |  Estimated Time: 30–60 Minutes Clean the target side panel area thoroughly with an isopropyl alcohol wipe to remove wax, grease, and debris. Dry-fit both vents against the body panel to confirm alignment and identify the correct mounting points before committing to installation. If painting the vents, do so prior to installation. Apply a plastic primer first, followed by your chosen colour coat, and allow full cure time. Align the vent to the panel, ensuring the moulded contours follow the body line accurately. Mark mounting positions lightly if needed. Secure using the provided clips or fixings. Apply even pressure to avoid warping the ABS surface. Repeat the process on the opposite side, checking both vents are level and symmetrically positioned before finalising. Step back and visually inspect alignment from the front and rear of the vehicle before driving. Note: Panel preparation is the most critical step. Any surface contamination beneath the vent can affect adhesion or fitment over time. If in any doubt, consult a professional body shop for fitting — particularly if you intend to paint-match or blend the finish. Built for Range Rover Sport Owners Who Mean It At Victorious Automotive, every part we stock is chosen for owners who care about the details. These side vents are a small change with a significant visual return — and they ship worldwide via DHL, FedEx, UPS, and TNT, backed by our 30-day money-back guarantee. Shop Range Rover Sport L320 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, chassis codes, and brand references are used for compatibility identification purposes only. Trademarks remain the property of their respective owners.

Land Rover · Range Rover Sport L320 · Rear Lighting Smoked Look Rear Lamps — Range Rover Sport L320 (2005–2013) A bold, darkened aesthetic upgrade for your L320 Sport — direct-fit tail light assemblies that transform the rear end without compromising on visibility or road legality. L320 2005–2013 Smoked Finish PC + ABS Construction 12V Tail Light Assembly Direct Fit CCC Certified 6kg Pair Overview The Range Rover Sport L320 was a turning point for Land Rover — sharper, more athletic, and distinctly purposeful compared to anything the brand had produced before it. Produced from 2005 through to 2013 across multiple facelifts and trim levels, the L320 remains one of the most recognisable performance SUVs of its era. Owners who have held onto these vehicles — or recently acquired one — understand that keeping it looking sharp is just as important as keeping it mechanically sound. These smoked look rear lamp assemblies are purpose-designed for the L320 chassis, replacing the standard clear or amber-accented OE units with a darker, more aggressive tinted finish. Constructed from high-grade PC (polycarbonate) and ABS plastic, the housings are impact-resistant, UV-stable, and built to endure the same conditions your Sport was designed to handle. The smoked lens filter softens the rear lighting cluster into a cohesive, blacked-out aesthetic that sits perfectly alongside factory Sport Black packs or any custom build. Unlike generic aftermarket options, these assemblies are engineered as complete drop-in replacements. All mounting points, wiring connectors, and bulb positions mirror the factory specification — meaning no cutting, no splicing, and no guesswork. Whether you're refreshing a tired rear end or building toward a stealth-spec look, these lamps deliver a measurable visual improvement from the moment they're fitted. What's Included 🔴 Left Rear Lamp Assembly Driver-side, smoked finish, complete unit 🔴 Right Rear Lamp Assembly Passenger-side, smoked finish, complete unit 🔌 OE-Match Wiring Connectors Direct plug-in, no modification required 🔧 Mounting Hardware Factory-spec fixings included 📄 Fitting Guide Step-by-step installation reference Product Highlights Smoked tinted lens finish for a stealth, blacked-out rear aesthetic Complete left and right assembly — sold as a pair PC + ABS construction for impact resistance and long-term durability UV-stabilised housing prevents yellowing and discolouration over time Direct OE replacement — no cutting, drilling, or wiring modification Factory-matched mounting points for a flush, rattle-free fit Compatible with 12V standard bulb configuration CCC externally tested and certified for quality assurance Covers all L320 production years including pre- and post-facelift variants Lightweight at approximately 6kg per pair — no structural load concerns Compatibility Vehicle Model Code Year Range Trim Fitment Range Rover Sport L320 2005–2009 (Pre-Facelift) S, SE, HSE, Supercharged Direct Fit Range Rover Sport L320 2009–2013 (Facelift) S, SE, HSE, Autobiography, GT Direct Fit Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L322 / L405 All Years All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: T20 Torx, Trim Removal Tool Open the tailgate fully and locate the access panel inside the boot lining adjacent to each rear lamp cluster. Remove the trim clips or fasteners to expose the lamp housing bolts. Using a T20 Torx driver, remove the three to four retaining bolts securing the lamp assembly to the body. Support the unit from the outside to prevent it dropping. Carefully pull the lamp assembly away from the bodywork. Disconnect the wiring loom connector by pressing the release tab and pulling firmly — do not tug the wiring itself. Unbox the new smoked lamp assembly. Confirm the unit matches orientation (left or right) before proceeding. Connect the wiring loom connector to the new unit until you hear it click into place. Align the new lamp assembly with the mounting holes and hand-tighten the retaining bolts before torquing to factory specification. Ensure the gasket seats flush against the bodywork to prevent water ingress. Refit the boot lining trim panel, then test all functions — stop lights, indicators, reverse, and fog — before closing the tailgate. Repeat the process on the opposite side. ⚠ Important: Smoked lamp lenses reduce light transmission relative to clear OE units. Always verify that your brake, indicator, and fog light functions remain visible and compliant with local road lighting regulations before driving on public roads. If in any doubt, consult a qualified auto-electrician or vehicle lighting specialist. Upgrade Your L320 Sport Today The smoked rear lamp upgrade is one of the most impactful and cost-effective changes you can make to the rear of a Range Rover Sport L320. Order today with worldwide DHL, FedEx, UPS, or TNT shipping — and enjoy complete peace of mind with our 30-day money-back guarantee. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Land Rover · Discovery Sport · Front Grille ABS Front Middle Grille – Gloss Black | Land Rover Discovery Sport 2015–2018 A direct-fit gloss black ABS front grille replacement that sharpens the Discovery Sport's face with a cleaner, more aggressive presence — no cutting, no drilling, no compromise. Discovery Sport L550 2015–2018 ABS Plastic Gloss Black Direct Fit No Drilling Racing Grille Style CCC Certified 112cm × 40cm 5kg Overview The Land Rover Discovery Sport (L550) sits at the heart of the Land Rover lineup — a capable, family-focused SUV that rewards owners who take pride in how it looks just as much as how it performs. Whether you're running school runs or weekend trails, the Discovery Sport's front end is the first thing people see, and the factory grille, while functional, often feels like an afterthought compared to the vehicle's overall character. This high-quality ABS front middle grille is designed specifically for Discovery Sport models produced between 2015 and 2018. Finished in deep gloss black, it replaces the standard centre grille section with a cleaner, more purposeful aesthetic — the kind of subtle visual upgrade that reads as factory-spec to the untrained eye but signals intent to those who know. The racing grille style adds a contemporary aggression without straying from the Discovery Sport's core design language. Constructed from high-grade ABS thermoplastic, this grille delivers the rigidity and UV resistance needed for long-term exterior use. At 112cm wide and 40cm tall, it covers the full middle grille aperture precisely. Fitment is straightforward — existing mounting points are retained, meaning no permanent modifications to your vehicle are required. This is the kind of upgrade Discovery Sport owners return to Victorious for: well-engineered, visually rewarding, and built to last. What's Included 🪟 Front Middle Grille Gloss black ABS, full replacement unit 🔩 Mounting Hardware Fixing clips and fasteners for secure fitment 📄 Fitment Guide Basic installation reference included 📦 Protective Packaging Foam-lined box for safe international transit Product Highlights Precision-engineered for Discovery Sport L550 2015–2018 direct fit High-grade ABS thermoplastic construction — rigid and UV stable Deep gloss black finish — clean, modern, and highly durable Racing grille style design adds visual aggression without modification Full 112cm × 40cm coverage across the front middle aperture Uses OEM mounting points — zero drilling or permanent changes required Lightweight at 5kg — no impact on vehicle weight balance or aerodynamics CCC externally certified for material safety and quality compliance Compatible with all trim levels across the 2015–2018 model year range Bolt-on DIY installation achievable in under two hours with basic tools Compatibility Vehicle Model Code Year Range Trim Fitment Land Rover Discovery Sport L550 2015 All Trims Direct Fit Land Rover Discovery Sport L550 2016 All Trims Direct Fit Land Rover Discovery Sport L550 2017 All Trims Direct Fit Land Rover Discovery Sport L550 2018 All Trims Direct Fit Land Rover Discovery Sport L550 2019–2024 (Facelift) All Trims Not Compatible Land Rover Discovery 5 L462 2017–2024 All Trims Not Compatible Land Rover Discovery 4 L319 2009–2016 All Trims Not Compatible Range Rover Evoque L538 / L551 All Years All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy · Estimated Time: 60–90 Minutes · Tools Required: Trim removal tool, flathead screwdriver, T20 Torx bit Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for easier access to the upper grille mounting points. Using a trim removal tool, carefully release the plastic clips securing the existing front middle grille to the bumper surround. Work from one end to the other to avoid cracking the surrounding trim. Remove any Torx screws (typically T20) securing the grille at the top or side mounting brackets. Keep all fixings in a safe container — you may need them for reassembly. Gently pull the original grille forward and away from the bumper aperture. Disconnect any wiring loom connectors if applicable to your trim level (e.g. adaptive cruise sensor surround). Align the new ABS gloss black grille into the aperture and press firmly into position, engaging each clip in sequence from centre outward. Refit any Torx screws to secure the upper edge. Step back and verify the grille sits flush and level across the full width. Close the bonnet and inspect the fitment from the front to confirm alignment before driving. ⚠ Note: If your Discovery Sport is equipped with a front parking sensor surround or adaptive cruise control module housed within the grille assembly, take particular care not to strain any wiring during removal. If in doubt, consult a Land Rover specialist or approved bodyshop before proceeding. Built for Discovery Sport Owners Who Care At Victorious Automotive, every product we stock is chosen because it earns its place on your vehicle. This gloss black front grille is one of the most impactful visual upgrades available for the 2015–2018 Discovery Sport — clean, purposeful, and properly engineered. Browse our full Discovery Sport collection for more exterior and interior upgrades trusted by owners across the world. Shop Discovery Sport Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Land Rover Discovery Sport · Exterior Styling Dynamic Side Vents – Land Rover Discovery Sport (2015–2019) Aggressive, purposeful styling that transforms the front fenders of your Discovery Sport with race-inspired side vent detailing — no cutting, no drilling, no compromise. Discovery Sport 2015–2019 ABS Construction Racing Grille Style Direct Clip Fit 1.2kg CCC Certified Pair Included Exterior Styling Overview The Land Rover Discovery Sport occupies a distinctive place in the LR lineup — a genuinely capable family SUV that wears its practicality with understated confidence. But for owners who want to push the aesthetic a little further, the standard fender treatment leaves room for something more assertive. These Dynamic Side Vents are designed precisely for that purpose. Engineered from high-grade ABS thermoplastic, these side vent surrounds slot directly onto the front fender area of 2015–2019 Discovery Sport models, adding a race-inspired visual depth that echoes the kind of detailing seen on performance-tuned versions of the model. The sculpted vent profile adds dimension and visual width — making the Discovery Sport read as sharper and more planted from every angle. At Victorious, we stock these because they represent the kind of bolt-on upgrade that genuinely elevates a vehicle's presence without demanding bodywork, paint, or professional fitting. Clean, confident, and purpose-built for the Discovery Sport — they're the kind of detail only enthusiasts will clock, and everyone else will simply sense. What's Included 🔲 Side Vent Surrounds (Pair) Left and right units included — complete set for both fenders 🔩 Mounting Clips / Fasteners Pre-matched hardware for secure, rattle-free fitment 📄 Fitting Guide Step-by-step reference for a straightforward installation 🛡️ Protective Packaging Double-layered for safe international transit via DHL/FedEx Product Highlights Precision-moulded ABS construction for durability and UV resistance Race-inspired dynamic vent profile adds visual depth to front fenders Lightweight at 1.2kg — no structural impact on the vehicle CCC certified — meets applicable external quality standards Clip-fit installation — no drilling or cutting required 35cm length fills the fender zone cleanly without overhang Compatible across all Discovery Sport trim levels 2015–2019 Sold as a complete pair — both sides covered in one purchase Paintable surface — can be colour-matched to your vehicle's bodywork Designed to complement factory styling lines on the L550 platform Compatibility Vehicle Year Range Platform Fitment Land Rover Discovery Sport 2015–2019 L550 Direct Fit Land Rover Discovery Sport (Facelift) 2020–2024 L550 Facelift Not Compatible Land Rover Discovery 5 2017–2024 L462 Not Compatible Land Rover Discovery 4 2009–2016 L319 Not Compatible Range Rover Evoque 2011–2018 L538 Not Compatible Range Rover Velar 2017–2023 L560 Not Compatible If your vehicle is not listed or you are unsure of your build year, contact us on +44 203 943 9919 before ordering. Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–45 Minutes  |  🛠 Tools Required: Trim removal tool, clean cloth Park the vehicle on a flat surface and ensure the front fender area is clean and dry. Remove any dust or road debris with a microfibre cloth. Carefully remove any existing trim clips or fittings in the fender vent area using a plastic trim removal tool to avoid paint damage. Dry-fit both side vent surrounds to confirm alignment and seating before committing to final installation. Press the vent surround firmly onto the fender, engaging all mounting clips in sequence from front to rear. You should hear each clip click into place. Repeat for the opposite side, checking both units are level and symmetrically positioned before stepping back to assess fitment. If planning to paint the vents, prime and colour-match before final installation using 400–600 grit preparation and compatible ABS primer. ⚠ Note: These vents are designed for 2015–2019 pre-facelift Discovery Sport models only. Always verify your build year via your VIN or chassis plate before installation. If in doubt, contact our team prior to fitting. Complete Your Discovery Sport Browse our full range of Discovery Sport accessories — from exterior styling upgrades to interior refinements — all curated for the L550 platform. Shop Discovery Sport Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx, UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 5 · Front Grille Front Middle Abs Grille — Land Rover Discovery 5 (2017–2018) A precision-moulded ABS front centre grille panel designed specifically for the Discovery 5, delivering a refreshed, purposeful look with no compromises to fitment or finish. Discovery 5 L462 2017–2018 ABS Material Direct Fit Front Centre Grille CCC Certified SVSPS No Cutting Required Overview The Land Rover Discovery 5 occupies a unique space in the LR lineup — it's the vehicle that blends genuine family versatility with serious off-road credibility. Launched with a bold, contemporary face, the Discovery 5 rewards owners who take an interest in its presentation. The front grille is one of the most immediately visible elements of the vehicle, and the condition or style of that grille sets the tone for everything else. This front middle centre grille is manufactured from high-grade ABS (Acrylonitrile Butadiene Styrene), a material widely used in OEM and aftermarket automotive trim for its resilience to UV exposure, temperature cycling, and low-speed impact. Measuring 112cm wide, 40cm tall, and 12cm deep, this grille has been dimensioned specifically for the 2017 and 2018 model year Discovery 5, ensuring the fitment precision that Land Rover owners rightly expect. Whether you're replacing a damaged factory grille, refreshing worn trim, or simply upgrading the front-end aesthetic of your Discovery 5, this unit delivers a clean, factory-consistent result. At 5kg, it carries the reassuring solidity of a quality component without adding unnecessary bulk to the front end. What's Included 🔲 Front Centre Grille Panel ABS moulded, dimensioned for Discovery 5 2017–2018 🔩 Mounting Hardware Clips and fasteners for secure OE-style fitment 📄 Fitment Guide Basic installation reference included 📦 Protective Packaging Secured for safe international transit Product Highlights Precision-moulded ABS construction for long-term durability Exact fitment for Discovery 5 L462 2017 and 2018 model years CCC certified — independently externally tested Dimensions: 112cm × 40cm × 12cm for accurate fitment 5kg unit weight — solid without excess mass UV and temperature resistant ABS material Direct OE-position replacement — no cutting or modification Clean, factory-consistent finish straight from the box Compatible with standard Discovery 5 front bumper assembly Ships worldwide via DHL, FedEx, UPS, or TNT Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017 Direct Fit Land Rover Discovery 5 L462 2018 Direct Fit Land Rover Discovery 5 L462 2019–2024 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Installation Notes Difficulty: Moderate  |  Estimated Time: 45–90 Minutes  |  Tools Required: Trim removal tools, T20/T25 Torx set, panel clips Ensure the vehicle is parked on a flat surface with the engine off and fully cooled. Disconnect the battery as a precaution before working on front-end trim. Using a trim removal tool, carefully release the existing front grille assembly from the bumper surround. Work from the outer edges inward to avoid stressing the mounting tabs. Locate and remove all factory fasteners, clips, and any secondary fixings holding the centre grille section in place. Note their positions for reassembly. Lift out the existing centre grille panel. Inspect the surrounding bumper trim for any damage before fitting the new unit. Align the new ABS front centre grille into the bumper aperture. Begin seating the mounting tabs from the centre outward to ensure even tension across the panel. Re-secure all fasteners and clips until you feel each one click firmly into position. Do not over-torque any fixings. Step back and visually inspect the panel for even gaps and flush alignment before reconnecting the battery and carrying out a final check. ⚠ Note: This grille is designed for 2017–2018 Discovery 5 variants. If your vehicle was registered in a different model year or has undergone a facelift, please confirm the front bumper specification before fitting. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Discovery 5 Today Victorious Automotive supplies premium Land Rover accessories to owners who refuse to settle. With 12,300+ verified reviews and a 4.9/5 star rating, we're trusted by enthusiasts across the world to get it right. Shop All Discovery 5 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle codes are referenced solely for fitment compatibility purposes. All trademarks remain the property of their respective owners.

Victorious · Range Rover Sport L494 · Interior Trim Carbon Fiber Style Dashboard Trim Kit – Range Rover Sport L494 Premium carbon TPU trim kit that transforms your Sport's dashboard with a bold, performance-inspired finish in minutes. L494 · 2014–2017 Carbon TPU 3-Piece Set LHD Only Clip-On Fit Overview The 2014–2017 Range Rover Sport L494 sits at the heart of Land Rover's performance lineage. A naturally aspirated powerhouse with commanding proportions, it demands an interior that matches its attitude. This carbon fiber style dashboard trim kit answers that call, delivering the visual edge of an SVR without modification or compromise. Our 3-piece trim set clips seamlessly over your existing climate control bezels, introducing authentic carbon fiber texturing to the most visible part of your cabin. Precision laser-cut from high-quality carbon TPU, each piece aligns flush with factory panels, creating that integrated, factory-correct appearance that separates craft from compromise. Installation takes under 15 minutes. No cutting, gluing, or electrical work required. The result is a cabin that looks intentional, refined, and distinctly more premium—the kind of detail that catches every eye inside your vehicle and every time you sit behind the wheel. What's Included 📦 3-Piece Carbon Fiber Trim Set Precision-cut bezels for climate control area ⚙️ Direct Clip-On Installation No modifications, removal, or drilling required ✓ Guaranteed Fit Tested for 2014–2017 Range Rover Sport L494 Product Highlights Carbon TPU material resists cracking and UV damage Precision laser-cut for gap-free integration Clips over factory trim—zero permanent modifications Transforms cabin with premium, sporty aesthetic Lightweight and durable for years of use Perfect for left-hand drive models Complements OEM and aftermarket upgrades Professional appearance rivals factory SVR trim Simple installation—no tools or adhesives needed Instantly elevates your Sport's interior presence Compatibility Model Year Range Drivetrain Status Range Rover Sport L494 2014–2017 LHD Only Direct Fit Range Rover Sport L494 2014–2017 RHD Not Compatible Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Installation Difficulty: Easy · Time: 10–15 Minutes Ensure your vehicle's ignition is off and the cabin is clean and dry. Identify the climate control bezels on your dashboard—three trim pieces surround the main climate panel. Gently test-fit each carbon fiber piece to confirm alignment. No force should be required. Starting with the center piece, carefully clip it over the factory bezel, working from the top down. Repeat for the left and right side trim pieces, ensuring even pressure and full seating. Step back and verify all pieces are flush and evenly gapped. No adhesive is required. Note: This kit is designed for left-hand drive Range Rover Sport L494 models only (2014–2017). Verify your vehicle's steering position before purchase. Pieces are not removable once seated; handle with care during installation. Complete Your Sport's Transformation Premium cabin upgrades don't require compromise. This carbon fiber trim kit delivers visual impact, durability, and factory-correct fit in one seamless package. Elevate your L494 today. Shop Range Rover Sport Upgrades Apply discount code 22GET20 for 20% off when you purchase any 2 items. 4.9/5 · 12,300+ Reviews 🌍 Worldwide Shipping ✓ 30-Day Money Back 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or their parent companies. All vehicle names, logos, and brands are the property of their respective owners. This product is designed as a non-OEM accessory upgrade and is sold as-is.

Victorious · Range Rover Sport L494 · Interior Trim Carbon Fiber Style ABS Center Console Cover – Range Rover Sport 2014–2017 Transform your climate control area into a premium carbon fiber accent in under 5 minutes with zero tools required. L494 2014–2017 ABS Plastic Carbon Fiber Style Clip-On Install Overview The Range Rover Sport L494 (2014–2017) deserves interior details that match its commanding presence. This Carbon Fiber Style Center Console Cover transforms your climate control panel—a highly visible area of your cabin—from standard plastic to premium carbon fiber aesthetic. It's the kind of detail that catches every passenger's eye. Precision laser-cut from high-quality ABS plastic with an authentic carbon fiber texture finish, this cover clips seamlessly over your existing climate unit with zero modification required. No glue, no permanent changes, no regrets. Installation takes minutes; the visual upgrade is immediate and unmistakable. The peel-and-stick adhesive backing ensures rock-solid placement even on rough road surfaces. Whether you're aiming for the SVR look or simply want to elevate your Sport's interior, this cover delivers genuine premium appeal without the premium price tag. It's the exact kind of thoughtful upgrade that separates a maintained Range Rover from a truly refined one. What's Included 📦 Center Console Cover Precision laser-cut ABS with carbon fiber finish ✓ Adhesive Backing Peel-and-stick for added security Product Highlights Effortless clip-on installation—no tools, glue, or permanent modifications Premium ABS plastic with authentic carbon fiber texture and finish Laser-cut precision for flawless factory-fit alignment Peel-and-stick adhesive backing for enhanced grip and stability Direct fit for Range Rover Sport 2014, 2015, 2016, 2017 Achieve distinctive SVR-inspired interior aesthetic instantly Durable material resists scratching, fading, and UV exposure Reversible installation—no permanent damage to original panel Worldwide shipping via DHL, FedEx, UPS, and TNT Backed by 30-day money-back guarantee and 4.9/5-star reviews Compatibility Range Rover Sport Model Year Range Fit Status Range Rover Sport L320 2005–2013 Not Compatible Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Guide Difficulty Level: Beginner | Time Required: 3–5 Minutes Prepare your workspace. Park in a clean, dry environment. Open the driver's door and examine your existing climate control panel to locate the precise mounting area. Clean the surface. Wipe down your current climate cover with a dry microfiber cloth to remove dust, debris, and oils. A clean surface ensures optimal adhesive contact. Position the cover. Align the cover carefully over your existing climate unit. The laser-cut design ensures a precision fit with zero gaps. Engage the clips. Gently press the cover downward from the top edge until you hear or feel the clips snap firmly into place around the climate panel edges. Apply adhesive backing. Peel the backing from the self-adhesive strip and press firmly along the edges for 10–15 seconds to lock the cover in place. Final check. Inspect all edges and corners. The cover should sit flush with zero movement or rattle when gently pressed. Note: Do not force the clips; they are designed for smooth, firm engagement. If you encounter resistance, double-check alignment and reposition. Never apply excessive pressure, as this may damage the original climate panel. Elevate Your Range Rover Sport Interior Today Premium carbon fiber styling doesn't require premium pricing—or permanent changes. This center console cover delivers SVR-level aesthetics in minutes, with zero risk. Browse Range Rover Sport Collection Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 stars – 12,300+ verified reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day guarantee – Money back, no questions 📞 Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any parent company. All product names, logos, and brands are the property of their respective owners. This product is an aftermarket accessory and does not constitute an official Land Rover or Range Rover product. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport · Exhaust System Stainless Steel Exhaust Muffler for Range Rover Sport A precision-engineered stainless steel muffler that refines exhaust tone, reduces back pressure, and delivers a lasting, corrosion-resistant finish worthy of the Range Rover Sport's performance pedigree. Range Rover Sport L494 · L320 · L461 Stainless Steel Exhaust Muffler Corrosion Resistant Direct Fit Worldwide Shipping CAR-partment Overview The Range Rover Sport occupies a very particular space — a vehicle that genuinely performs, whether carving mountain roads or commanding an urban setting. It's a machine where the details matter, and that extends beneath the bodywork. The exhaust system is one component many Sport owners overlook until it begins to show its age: corrosion, reduced flow efficiency, and a dulled acoustic note that no longer reflects the engine's character. This stainless steel exhaust muffler is built to address all three. Manufactured from high-grade stainless steel, it resists the accelerated oxidation that plagues mild steel OEM mufflers — particularly in regions with road salting, high humidity, or extreme temperature cycling. The material's thermal resilience means it holds its structural integrity and surface finish across the full operating range of the Sport's engine, whether petrol or diesel. Beyond durability, the muffler's internal architecture is designed to smooth exhaust flow, reducing turbulence and back pressure in a way that improves exhaust gas evacuation. The result is a cleaner, slightly more pronounced exhaust note — refined rather than aggressive — and a fitment that restores or exceeds OEM performance standards without modification to the rest of the exhaust system. What's Included 🔩 Stainless Steel Muffler Main unit, fully assembled and ready to fit 🔗 Mounting Hardware Fasteners and clamps where applicable 📄 Fitting Reference Guide Basic installation reference sheet 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights High-grade stainless steel construction throughout Superior corrosion and oxidation resistance Engineered to reduce exhaust back pressure Refined, deeper exhaust note without excess noise Direct OEM replacement geometry for clean fitment Maintains factory exhaust system compatibility Thermal stability across all operating temperatures Polished outlet finish enhances underbody appearance Long-service lifespan — outlasts standard mild steel units No modifications required to surrounding exhaust components Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L405 / L460 2013–2026 Verify Before Order Range Rover Velar L560 2017–2024 Not Compatible Land Rover Discovery L462 (D5) 2017–2024 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible If you're unsure whether this muffler is correct for your specific build, engine variant, or model year, please contact us before ordering: +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–120 minutes  ·  Recommended: Qualified Technician or Experienced DIY Allow the vehicle to cool fully — exhaust components retain heat for an extended period after use. Work only on a cold system. Raise the vehicle safely using a hydraulic lift or axle stands rated for the Range Rover Sport's weight. Never work beneath a vehicle supported only by a jack. Inspect the existing exhaust hangers and clamps before removal. Corroded fasteners should be treated with penetrating fluid and allowed to soak for 15–20 minutes before attempting removal. Disconnect the existing muffler from the mid-pipe and rear section. Support the muffler with a jack or assistant to prevent stress on remaining components. Transfer any reusable gaskets or hangers if applicable. Install the new stainless steel muffler, aligning with the mid-pipe and rear section connections. Secure all clamps and fasteners to the manufacturer's specified torque. Check hanger alignment to ensure the muffler sits centrally within the vehicle undercarriage. Start the vehicle and run to operating temperature. Inspect all connection points for exhaust leaks. A brief initial burn-off of surface oils from the new unit is normal. Important: Always confirm pipe diameter, inlet configuration, and engine variant compatibility before fitting. Incorrect fitment can result in exhaust leaks, noise, or damage to surrounding components. If in doubt, consult a qualified exhaust technician. Built for the Range Rover Sport. Finished to Last. Explore the full range of exhaust upgrades and performance accessories for your Range Rover Sport at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Shop Range Rover Sport Accessories Shop New Range Rover Sport L461 Use code 22GET20 at checkout for 20% off any two items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All model names, vehicle codes, and trademarks are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Always verify compatibility with your specific vehicle before purchase. For advice, contact our team on +44 203 943 9919.

Victorious Automotive · Range Rover Sport L494 / Velar · Interior Trim Carbon Fibre Steering Wheel Trim for Range Rover Sport & Velar 2014–2020 Instantly elevate your Range Rover's interior with a precision-cut carbon fibre steering wheel trim that delivers the SVR aesthetic — no modification, no tools, no compromise. Range Rover Sport L494 Range Rover Velar 2014–2020 Carbon TPU Clip-On Fitment SVR Style No Drilling Required Interior Upgrade Overview The Range Rover Sport L494 and Range Rover Velar share some of Land Rover's most driver-focused interiors — but the standard steering wheel, while refined, lacks the visual drama that sets the top-tier SVR specification apart. If you've ever sat behind the wheel of an SVR and felt the difference that carbon detailing makes to the cockpit experience, you'll understand exactly what this trim is designed to achieve. This carbon fibre steering wheel trim is engineered specifically for Range Rover Sport and Velar models from 2014 to 2020. Manufactured from high-quality carbon TPU and precision laser-cut to match the exact contours of the OEM steering wheel, the trim clips cleanly and securely over your existing wheel cover — no adhesive, no drilling, no permanent changes. The result is a seamless, factory-finish look that is virtually indistinguishable from a full SVR replacement. Part of our broader Carbon Interior Package, this trim pairs beautifully with matching carbon gear surround, dashboard accents, and door handle covers available across our Range Rover Sport and Velar collections. It's the kind of upgrade that costs a fraction of a factory SVR steering wheel but delivers the same visual impact — immediately, and without a workshop booking. What's Included 🏎️ Carbon Fibre Steering Wheel Trim Precision laser-cut to OEM steering wheel profile 📎 Retention Clips Pre-fitted clip system for secure no-adhesive fitment 📄 Fitment Guide Simple step-by-step installation instructions included 🛡️ Protective Packaging Shipped securely to prevent transit damage Product Highlights Laser-cut precision for a flush, factory-level fit on OEM steering wheel High-quality carbon TPU construction — lightweight and durable Clip-over design — no adhesive, no tools, no permanent modification Replicates the SVR steering wheel carbon trim aesthetic exactly Part of the full Victorious Carbon Interior Package range Compatible with both Range Rover Sport L494 and Range Rover Velar Reversible installation — remove and refit with ease Resistant to UV fade and daily wear in high-touch environments No airbag interference — designed to sit clear of safety components Transforms the cockpit feel without workshop costs or downtime Compatibility Model Code Years Fitment Range Rover Sport L494 2014–2020 Direct Fit Range Rover Velar L560 2018–2020 Direct Fit Range Rover Vogue L405 2013–2020 Verify Before Order Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Park your vehicle on a flat surface and ensure the steering wheel is in the straight-ahead, unlocked position before beginning. Clean the existing steering wheel trim surface thoroughly with a lint-free cloth to remove any dust, oils, or debris that could affect clip engagement. Align the carbon fibre trim piece with the top section of your steering wheel, matching the profile to the OEM cover contours. Apply firm, even pressure along the trim from the centre outward, pressing each clip point into place until you feel a positive snap-fit engagement. Run your fingers along the full edge of the trim to confirm it is seated flush and uniformly — there should be no gaps or lifting at any point. Turn the steering wheel slowly through full lock in both directions to confirm the trim does not interfere with wheel rotation or any stalks. Important: Do not attempt installation with the vehicle in motion or with the engine running. Ensure the trim sits entirely clear of the airbag module and horn pad. If at any point the trim feels loose or misaligned, remove and re-seat before driving. If in doubt, consult a professional installer. Complete Your Carbon Interior This steering wheel trim is just one piece of a full carbon interior transformation. Browse our complete Carbon Interior Package for the Range Rover Sport L494 and Velar — and save when you bundle. Shop Range Rover Sport Accessories   Shop Range Rover Velar Accessories Buying 2 or more items? Use code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. SVR is a trademark of Jaguar Land Rover Limited.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Carbon Fibre Style Door Panel Covers — Range Rover Sport L494 2014–2020 Instantly elevate your Sport's cabin with precision-cut carbon TPU door trim that delivers the flagship SVR aesthetic — no modifications required. Range Rover Sport L494 2014–2020 Carbon TPU SVR Look 4-Piece Set Clip-On Fitment Laser Cut Interior Trim Overview The Range Rover Sport L494 (2014–2020) is one of Land Rover's most driver-focused platforms — a vehicle that sits firmly between everyday usability and genuine performance intent. Owners who choose the Sport already have a discerning eye for detail, and the interior is where that detail matters most. The standard door panel trim, while competent, leaves room for a more purposeful, premium finish — particularly for those who've always admired the carbon-accented cabins of the top-tier SVR variant. These Carbon Fibre Style Door Panel Covers are precision laser-cut from high-quality carbon TPU — a flexible, durable material that faithfully replicates the weave and depth of genuine carbon fibre while remaining forgiving enough for a flawless clip-over installation. Each piece is engineered to sit directly over your existing door trim with no drilling, no adhesive damage, and no permanent alterations to your vehicle's interior. Supplied as a full 4-piece set covering all four door panel areas, these covers form part of our wider Carbon Interior Package for the L494 Sport — meaning they pair seamlessly with other carbon trim pieces across the dashboard, centre console, and steering column for a fully cohesive cabin transformation. What's Included 🚗 Front Left Door Cover Driver-side front door panel trim 🚗 Front Right Door Cover Passenger-side front door panel trim 🚗 Rear Left Door Cover Rear driver-side door panel trim 🚗 Rear Right Door Cover Rear passenger-side door panel trim 📋 Fitting Guide Step-by-step installation instructions Product Highlights Precision laser-cut for an exact, factory-level fit on L494 door panels High-quality carbon TPU material — flexible, durable, and heat-resistant Authentic carbon fibre weave texture and depth — virtually indistinguishable Full 4-piece set covers all four doors for a cohesive cabin upgrade Simple clip-over installation — no drilling, cutting, or adhesive required Reversible fitment — remove and revert to stock at any time Achieves the SVR interior look without SVR price tags Compatible with Part of the wider Victorious Carbon Interior Package No professional tools required — a standard trim removal tool is sufficient Worldwide shipping via DHL, FedEx, UPS, and TNT — tracked and insured Compatibility Vehicle Code Year Range Fitment Range Rover Sport SE L494 2014–2020 Direct Fit Range Rover Sport HSE L494 2014–2020 Direct Fit Range Rover Sport HSE Dynamic L494 2014–2020 Direct Fit Range Rover Sport Autobiography L494 2014–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🛠 Tools Required: Trim Removal Tool (optional) Begin with the front driver's door. Ensure the existing door panel is clean, dry, and free of any wax or polish residue in the trim area. Remove the corresponding carbon TPU cover piece from the set and flex it gently to confirm it aligns with your door panel profile. Starting from one edge, press the cover firmly onto the existing trim. The integrated clips will engage with the panel surface — work across the piece progressively to avoid air bubbles or misalignment. Apply firm, even pressure across the full surface to ensure all clips are fully seated and the cover sits flush. Repeat the process for the remaining three door covers, taking care to match left and right pieces to their correct sides. Once all four pieces are fitted, inspect each panel from multiple angles in natural light to confirm a seamless, factory-level finish. Note: Fitting in warm ambient temperatures (above 18°C) is recommended. Cold conditions can make the TPU material slightly stiffer and harder to seat correctly. Do not force any panel — if resistance is felt, gently warm the piece with a hairdryer on a low setting for 15–20 seconds before refitting. Upgrade Your Sport's Interior Today The SVR look has always been reserved for the top of the Range Rover Sport range — until now. These carbon door covers let every L494 owner bring that same level of interior ambition to their cabin, without the cost of a full model upgrade. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. This product is a carbon fibre style accessory made from carbon TPU and is not manufactured from genuine woven carbon fibre.

Victorious Automotive · Range Rover Sport L320 · Lighting Upgrades Ultra Bright SMD White LED Angel Eyes Halo Ring Daytime Running Light Kit — Range Rover Sport L320 (2003–2009) Transform the front-end presence of your early Range Rover Sport with crisp, high-output SMD LED halo rings that deliver both striking style and genuine DRL functionality — precision-fitted for the L320 platform. L320 2003–2009 SMD LED Angel Eyes Halo Ring Daytime Running Light 12V 3500LM CE Certified White HochiTech Plug & Play Overview The Range Rover Sport L320, produced between 2003 and 2009, remains one of the most purposeful and recognisable SUVs ever to wear the Land Rover badge. Its bold, squared-off headlight clusters gave it a distinctive road presence — but the era's halogen optics have always left room for improvement. For owners who want their L320 to look as commanding at standstill as it does on the road, this LED angel eye upgrade is one of the most effective and reversible modifications available. This kit from HochiTech features ultra-bright Surface Mounted Device (SMD) LED technology arranged in a precision halo ring format. Running at 12V and outputting a combined 3,500 lumens per set, the rings produce a clean, pure white light signature that integrates naturally into the L320's existing headlight housing. Whether used as daytime running lights, decorative illumination, or both, the visual impact is immediate and substantial — giving the front end a modern, premium feel without altering the factory aesthetic. Constructed from durable ABS housings with CE-certified LED arrays, this kit is built for long-term reliability. The lightweight design (just 350g for the full set) means there's no concern about placing additional load stress on your headlight assemblies. For any L320 owner who appreciates thoughtful, well-executed modifications, this halo ring DRL kit represents outstanding value and a meaningful visual upgrade. What's Included 💡 SMD LED Halo Rings Full set — one per headlight unit 🔌 Wiring Harness Pre-terminated leads for direct connection 🔩 Mounting Hardware ABS retention clips and brackets 📄 Installation Guide Step-by-step fitting reference Product Highlights Ultra-bright SMD LED technology for maximum light output 3,500 lumens per set — genuinely visible in all daylight conditions Pure white light output — clean, modern aesthetic Designed specifically for the Range Rover Sport L320 headlight cluster Functions as both decorative halo rings and daytime running lights Runs on standard 12V vehicle power — no relay modification required Durable ABS housing resists vibration and heat over time Lightweight at just 350g — no stress on headlight assembly CE certified for electrical safety and compliance Fully reversible installation — factory headlights unaltered Compatibility Vehicle Code Year Range Fitment Range Rover Sport L320 2003–2009 Direct Fit Range Rover Sport L320 2010–2013 Not Confirmed Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic hand tools, trim removal kit Safely disconnect the vehicle battery before beginning any work on the headlight assemblies. Remove the front bumper or access panel as required to gain clear access to the back of each headlight unit on the L320. Carefully detach the headlight assembly from its mounting points and disconnect the existing wiring loom connectors. Open the headlight housing (gentle heat from a heat gun may assist with sealed units) and position the SMD halo ring within the reflector bowl, securing with the supplied ABS clips. Route the wiring harness through the existing headlight grommet and connect to a switched 12V ignition feed or DRL circuit as preferred. Reassemble the headlight housing, refit the assembly, and reconnect all factory connectors before reattaching the battery. Test both halo rings before fully refitting any trim panels, confirming even illumination across each ring. ⚠ Important: This kit requires access to the interior of the headlight housing. Opening sealed headlight units may affect their weather resistance if not properly resealed. Use a suitable automotive adhesive sealant when reassembling. If in doubt, consult a qualified auto-electrician or lighting specialist. Always verify your local road traffic regulations regarding the use of additional lighting as DRLs. Upgrade Your L320's Lighting Today The Range Rover Sport deserves lighting that matches its character. This SMD LED angel eye kit is one of the simplest ways to modernise the front-end presence of your L320 — and we're here to help every step of the way. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes are used solely for fitment reference purposes. This product is an aftermarket accessory and is not a genuine Land Rover or JLR part.