Victorious · Land Rover / Volvo · Cooling System
Radiator Coolant Overflow Tank with Sensor & Cap – LR2 / Range Rover Evoque / Volvo
OEM-spec expansion tank with integrated temperature sensor and pressurised cap for Land Rover and Volvo TD4 engines.
LR024296
31200321
2.0L–2.2L TD4
Direct Fit
Sensor + Cap
12 Month Warranty
Overview
This is a direct-replacement radiator coolant overflow container engineered for Land Rover Freelander LR2, Range Rover Evoque, and Volvo S60/S80/V60/V70/XC60 models with 2.0–2.2L turbo-diesel engines. The tank manages coolant expansion under heat and pressure, maintaining optimal engine operating temperatures and protecting your cooling system from overpressure damage.
The expansion tank includes an integrated temperature sensor that feeds real-time coolant temperature data to your engine management system, allowing precise control of fan speed and thermostat response. The pressurised cap (LR000243) is engineered to release excess pressure safely when coolant expands, then reseal as the system cools.
Built to OEM specification with high-durability plastic construction and sealed sensor connector, this tank drops directly into place without modification. Whether you're addressing a cracked or leaking tank or performing a routine coolant system refresh, this part restores full cooling system performance and safety.
What's Included
🛢️
Expansion Tank
Complete plastic reservoir with drain provision
🌡️
Temperature Sensor
Factory-integrated, sealed connector ready
🔧
Pressurised Cap (LR000243)
OEM valve, 1.4 bar relief setting
✓
Mounting Brackets
Factory-spec fastening points included
Product Highlights
- OEM direct replacement for LR024296 / 31200321 / 100435
- Integrated NTC thermistor sensor; sealed connector included
- Pressurised cap with 1.4 bar relief valve (LR000243)
- Fits 2.0L & 2.2L TD4 diesel engines across multiple models
- Factory-approved plastic compound; UV & thermal resistant
- No drilling, cutting, or bracket fabrication required
- Drain provision at base for easy coolant removal
- 12-month warranty; genuine Partsmost quality control
- Weight 0.65 kg; compact front-mounted installation
- Free worldwide shipping on UK orders over £50
Compatibility Matrix
| Vehicle Model |
Years |
Engine |
Fit Status |
| Land Rover Freelander LR2 |
2006–2014 |
2.0L / 2.2L TD4 |
Direct Fit |
| Range Rover Evoque (L538) |
2011–2018 |
2.0L TD4 |
Direct Fit |
| Range Rover Evoque (L551) |
2018–2024 |
2.0L Ingenium |
Check Fit |
| Volvo S60 |
2000–2018 |
2.0L / 2.4L |
Direct Fit |
| Volvo S80 |
1998–2016 |
2.0L / 2.4L |
Direct Fit |
| Volvo V60 |
2010–2018 |
2.0L TD |
Direct Fit |
| Volvo V70 |
1996–2016 |
2.0L / 2.4L |
Direct Fit |
| Volvo XC60 |
2008–2017 |
2.0L / 2.4L |
Direct Fit |
Note: Always verify your VIN or part number before ordering. Later L551 Evoque models use different cooling architectures. Contact us with your registration for certainty.
Installation Notes
Difficulty: Intermediate | Time: 45–60 min | Tools: Socket set, coolant drain pan, torque wrench
-
Drain coolant. Place drain pan beneath radiator and lower engine (if fitted). Undo radiator drain plug and capture old coolant for safe disposal.
-
Locate the tank. On most models, the expansion tank sits high on the front-right of the engine bay. Disconnect the overflow hose from the radiator neck and the sensor connector from the tank top.
-
Release mounting bracket. The tank is secured by one or two bolts to a plastic or metal bracket. Remove these bolts and carefully lift the old tank clear of the engine bay.
-
Fit new tank. Position the new expansion tank in the same location and orientation as the original. Align the mounting bracket holes and torque bolts to 8–10 Nm. Do not over-tighten; the bracket is plastic.
-
Reconnect sensor. Push the sensor connector onto the new tank's sensor head until it clicks. Ensure the waterproof seal is seated correctly.
-
Reattach overflow hose. Secure the radiator overflow hose to the tank's inlet spigot using a hose clamp (typically 2.5 Nm or hand-tight + ¼ turn).
-
Fit the pressurised cap. Screw the new LR000243 cap onto the tank with a gentle quarter-turn after seating—do not over-torque.
-
Refill and bleed. Close the radiator drain. Refill the cooling system with the correct specification coolant (check your handbook). Run the engine to operating temperature and top up once more. Bleed air pockets by running the engine with the cap loosened (engine off) and the heater set to max.
-
Check for leaks. Inspect the sensor connector, hose clamps, and cap seal under the bonnet. No drips should appear. Clear any fault codes on your OBD scanner related to coolant temperature.
⚠️ Safety Warning: Never open the coolant system or cap when the engine is hot. Pressurised coolant can cause severe scalding. Allow the engine to cool for at least 30 minutes before beginning work. If you are unfamiliar with cooling system service, consult a qualified mechanic.
Ready to Restore Your Cooling System?
This OEM-spec expansion tank with integrated sensor and pressurised cap is the direct-fit solution for Land Rover and Volvo owners who demand reliability and precision. Keep your engine running cool under load.
Shop Cooling Parts
Use code 22GET20 for 20% off any 2 items
🚗 Worldwide Shipping DHL, FedEx, UPS, TNT
💬 Expert Support +44 203 943 9919
✓ 30-Day Guarantee Money back, no questions
⭐ 4.9/5 Stars 12,300+ verified reviews
Victorious Automotive is an independent specialist retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Volvo Car Corporation, or their parent companies. All trademarks, logos, and brand names are the property of their respective holders. Product compatibility information is provided in good faith based on OEM part specifications; we recommend verification with your vehicle's VIN or original part number before purchase.
