Victorious Automotive · Range Rover Evoque / Discovery Sport · Cooling System
Expansion Tank Lower Hose – Range Rover Evoque 2.0L Turbo
OEM-spec rubber coolant hose engineered to restore factory cooling system integrity and reliability.
L538 / L550
2012–2018
2.0L Turbo Petrol
Radiator Hose
Direct Fit
OEM LR024241
Overview
The Range Rover Evoque L538 (2012–2018) and Discovery Sport L550 (2015+) with 2.0L turbocharged petrol engines rely on precision-engineered cooling lines to manage heat under sustained load and high performance. The expansion tank lower hose is a critical component in this system, connecting the radiator expansion tank to the engine block and dissipating residual heat during and after operation.
Over time, OEM rubber hoses deteriorate due to thermal cycling, pressure fluctuations, and exposure to corrosive coolant chemistry. Cracks, splits, and seepage lead to coolant loss, air ingestion into the system, overheating, and—if left unaddressed—catastrophic engine damage. This genuine replacement hose restores OEM integrity using the same material specification and fitment geometry as the factory part.
Partsmost sources this component from established automotive suppliers and validates each unit against Land Rover technical standards. A full 12-month warranty and worldwide shipping via premium couriers ensure peace of mind whether you're a DIY enthusiast or supporting a professional technician.
What's Included
🔧
Expansion Tank Lower Hose
OEM-spec rubber radiator hose assembly
✓
Direct Replacement
Bolt-for-bolt compatibility with factory
🔐
12-Month Warranty
Full coverage against manufacturing defect
📦
Worldwide Delivery
DHL, FedEx, UPS with tracking and insurance
Product Highlights
- OEM-equivalent rubber composition for heat and pressure resistance
- Genuine Land Rover part numbers: LR024241 & LR035435
- Manufactured to exacting thermal and durability specifications
- Prevents coolant seepage and system air ingestion
- Factory fitment—no modification or adapter required
- Compatible with 2.0L turbocharged petrol engines only
- Restores full cooling system efficiency and reliability
- Easy and fast installation for experienced technicians
- High performance under sustained thermal load
- Premium alternative to OEM-original parts at competitive pricing
Vehicle Compatibility
| Vehicle Model |
Years |
Engine |
Compatibility |
| Range Rover Evoque L538 |
2012–2018 |
2.0L Turbo Petrol |
Direct Fit |
| Land Rover Discovery Sport L550 |
2015+ |
2.0L Turbo Petrol |
Direct Fit |
| Range Rover Evoque L551 |
2019+ |
2.0L Turbo Petrol |
Not Compatible |
| Discovery Sport L575 |
2024+ |
All engines |
Not Compatible |
Important: Verify your exact model year and engine code before purchase. Hose geometry and connection points differ across generations. Consult your service manual or contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure.
Installation Notes
Difficulty: Intermediate | Time: 45–90 Minutes
-
Safety First: Allow engine to cool completely. Remove negative battery terminal and drain cooling system into a clean container. Do not skip this step—pressurized coolant will cause severe burns.
-
Access: Remove any plastic undertray or engine cover necessary to reach the expansion tank and lower radiator connections.
-
Disconnect Old Hose: Loosen hose clamps at both ends using a Phillips or flat-head screwdriver. Twist gently and pull the old hose free. Inspect the mating surfaces for debris or corrosion.
-
Install New Hose: Slide the new hose onto the expansion tank outlet and radiator inlet. Position clamps 1–2 cm from each end and tighten securely—snug but not over-tightened to avoid crushing.
-
Refill Coolant: Pour fresh 50/50 coolant mixture (or per your service manual spec) back into the expansion tank to the "MAX" line. Reinstall filler cap.
-
Bleed Air: Start the engine and allow it to idle for 5–10 minutes. Monitor the temperature gauge. If air pockets remain, open the bleed screw on the thermostat housing briefly, then retighten.
-
Final Check: Turn off the engine, allow coolant to cool, and recheck the level. Top up if necessary. Run the engine once more and inspect all connection points for drips.
Warning: Never run the engine with the cooling system empty or partially empty. Air in the system will cause overheating, loss of heater function, and potential head gasket failure. If you are not confident with this procedure, seek assistance from a qualified Land Rover technician.
Ready to Restore Your Cooling System?
This OEM-spec expansion tank lower hose is the definitive replacement for Range Rover Evoque L538 and Discovery Sport L550 2.0L turbo engines. Order now with confidence—backed by a 30-day money-back guarantee, 12-month warranty, and 4.9-star verified reviews.
Shop This Part
Apply code 22GET20 for 20% off when purchasing 2 or more items.
✓ 12,300+ verified reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL, FedEx, UPS shipping
✓ Expert phone support +44 203 943 9919
Disclaimer: Victorious Automotive is an independent retailer specializing in Land Rover, Range Rover, and Defender accessories. We are not affiliated with, endorsed by, or an official subsidiary of Jaguar Land Rover Limited, Land Rover (a division of JLR), Range Rover, or any Land Rover marque or trademark owner. All vehicle names, logos, and specifications are retained for identification purposes only. Compatibility information is provided in good faith based on OEM part numbering and published service data. Always consult your vehicle's service manual or contact a Land Rover dealer to confirm fitment before purchase. Victorious Automotive assumes no liability for incorrect installation, misapplication, or damage arising from improper use.
