Products

Victorious Automotive · Land Rover Discovery 3 & 4 · Exterior Protection Leather Hood Guard for Land Rover Discovery 3 & 4 — Sandstone & Stone Chip Protector (2004–2016) A precision-fitted, genuine leather bonnet guard engineered to shield your Discovery's leading edge from stone chips, sand abrasion, and road debris — without compromising its commanding presence. Discovery 3 (2004–2009) Discovery 4 (2010–2016) 100% Leather Black Finish Adhesive Mount Exterior Protection No Drilling Required Direct Fit Overview The Land Rover Discovery 3 and Discovery 4 are built to venture well beyond the ordinary — and their bonnets bear the evidence. Whether you're covering motorway miles or navigating unpaved terrain, the leading edge of your Discovery's hood is continuously exposed to stone chips, grit, and abrasive debris that gradually erode the paintwork beneath. This premium leather hood guard has been specifically developed for Discovery 3 (2004–2009) and Discovery 4 (2010–2016) models, offering a tailored fit that sits flush against the bonnet's profile. Crafted from durable, high-grade leather with a clean black finish, it delivers robust protection while adding a subtle, purposeful aesthetic that complements the Discovery's bold exterior lines. Installation is entirely tool-free, utilising a professional-grade double-sided adhesive backing that bonds securely to the hood without drilling or permanent modification. It's the kind of considered accessory that Discovery owners rarely think about — until they wish they'd fitted it sooner. What's Included 🛡️ Leather Hood Guard 1× pre-formed bonnet protector, black leather finish 🔧 Adhesive Backing Pre-applied double-sided adhesive strip for secure fitment 📄 Fitting Guide Step-by-step installation reference included Product Highlights Precision-formed for Discovery 3 & 4 bonnet profile — no gaps, no misalignment Genuine high-grade leather construction for long-lasting durability Protects paintwork from stone chips, grit, sand, and road debris Clean black finish that integrates naturally with factory exterior styling Tool-free installation via professional-grade adhesive backing No drilling, cutting, or permanent modification required UV-resistant leather surface maintains appearance over time Compatible with both 2004–2009 (D3) and 2010–2016 (D4) variants Lightweight construction adds protection without bulk or weight Easily removable if required, without damage to underlying paint Compatibility Model Year Range Variant / Notes Fitment Land Rover Discovery 3 2004–2009 All trim levels (S, SE, HSE, XS) Direct Fit Land Rover Discovery 4 2010–2016 All trim levels (S, SE, HSE, Graphite) Direct Fit Land Rover Discovery 5 2017–present Different bonnet profile (L462) Not Compatible Land Rover Freelander 2 2006–2014 Different vehicle platform Not Compatible Range Rover Sport L320 2005–2013 Different bonnet profile Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  |  🔧 Difficulty: Easy — No Tools Required Thoroughly clean the bonnet's leading edge using an isopropyl alcohol wipe or panel wipe to remove all wax, grease, and dust. Allow to dry fully before proceeding. Dry-fit the leather hood guard against the bonnet to confirm alignment and positioning. Mark the desired position lightly if needed using removable tape. Peel back a small section of the adhesive backing film — do not remove the full strip at once — and carefully press the guard into position, starting from the centre and working outward. Once aligned, gradually peel the remaining backing film while pressing the guard firmly and evenly along its full length to ensure full adhesive contact. Apply firm hand pressure across the entire surface for 60 seconds. Avoid washing the vehicle or exposing the bonnet to moisture for at least 24 hours to allow full adhesive cure. ⚠ Important: Ensure the bonnet surface is at room temperature before fitting — application in cold or damp conditions may affect adhesive performance. Verify your vehicle's model year before ordering. If you are unsure about compatibility, contact our team on +44 203 943 9919 before purchasing. Complete Your Discovery's Protection Browse our full range of Land Rover Discovery 3 and Discovery 4 exterior accessories — from bonnet protectors to mirror covers, side steps, and beyond. Shop Discovery 4 Accessories   Shop Discovery 3 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Exterior Upgrades LED Air Intake System for Land Rover Defender 90/110 (2020–2024) – L663 A purpose-built bonnet air intake with integrated LED lighting that enhances both engine breathability and trail-ready visibility — engineered to complement the Defender's utilitarian character without compromise. Defender L663 2020–2024 90 & 110 ABS Plastic Matte Black Integrated LED No Coding Required Direct Fit Weather-Resistant Overview The Land Rover Defender L663 was built from the ground up as a vehicle that means business — whether navigating urban environments or pushing deep into remote terrain. Its bold, upright bonnet and angular surfacing are distinctly intentional, and any modification fitted to it needs to match that same standard of purpose-led design. This LED Air Intake System does exactly that. Crafted from high-grade ABS plastic with a matte black finish, this intake unit installs cleanly into your Defender's bonnet panel and serves a dual function: improving the volume and efficiency of airflow reaching your engine, while housing an integrated LED light bar that adds practical illumination for low-light driving, camp setups, or recovery situations where every lumen counts. Unlike aftermarket parts that simply look the part, this unit has been developed specifically around the Defender 90 and 110 body geometry — meaning you won't be trimming, adapting, or compromising fitment. No specialist coding is required, and no permanent modifications to the vehicle are necessary. It's the kind of upgrade that looks factory-fitted the moment it's on. What's Included 🔲 LED Air Intake Unit Matte black ABS with integrated LED bar 🔩 Mounting Hardware All fixings required for secure installation 💡 LED Wiring Loom Pre-terminated for straightforward connection 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered fit for Defender 90 and 110 L663 body panels Integrated LED light bar provides practical low-light illumination High-grade ABS plastic construction resists UV fade and impact Matte black finish matches OEM Defender trim and exterior styling Improves engine bay airflow during high-load and off-road driving No specialist coding or dealership visit required for installation Weather-sealed LED unit performs in rain, dust, and trail environments Retains factory bonnet function — no permanent modifications needed Aggressive, purposeful aesthetic consistent with Defender design language Straightforward DIY install achievable with basic tools in under an hour Compatibility Model Variant Year Range Fitment Land Rover Defender 90 All Trim Levels 2020–2024 Direct Fit Land Rover Defender 110 All Trim Levels 2020–2024 Direct Fit Land Rover Defender 130 All Trim Levels 2022–2024 Verify Before Order Range Rover Sport L494 All Trim Levels 2013–2020 Not Compatible Range Rover Vogue L405 All Trim Levels 2013–2020 Not Compatible Range Rover Velar All Trim Levels 2018–2022 Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 45–60 Minutes  ·  No Coding Required Ensure your Defender is parked on a level surface with the engine fully cool before beginning work. Open the bonnet and locate the existing intake panel area on the bonnet skin — refer to the included instruction guide for exact positioning on your specific variant (90 or 110). Carefully remove any factory trim clips or panels as directed, taking care not to scratch surrounding paintwork. Offer up the LED Air Intake unit to confirm alignment before committing to fixings — the mounting points should line up without force. Secure the intake housing using the supplied hardware, tightening to hand-firm before fully fastening to avoid stress on the ABS housing. Route the LED wiring loom along the bonnet to your chosen power source — a switched accessory feed is recommended to tie LED operation to ignition or a dedicated switch. Connect the wiring, test LED function, then close the bonnet and carry out a final visual check to confirm fitment is flush and secure. Note: If you are unsure about routing electrical wiring, we recommend having the LED connection completed by a competent auto-electrician. Always disconnect the vehicle battery before working with any electrical components. See It in Action Built for Defenders That Go Further Whether you're upgrading for the trail or sharpening the street presence of your L663, this LED Air Intake is one of those rare modifications that genuinely earns its place. Browse the full Defender L663 collection at Victorious Automotive — and use the code below to save on your next two items. Shop Defender L663 Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious · Lexus RX · Interior Lighting LED Ambient Interior Light Strips for Lexus RX (2013–2015) Transform your Lexus RX cabin into a customizable ambient environment with RGB lighting synchronized to music and mobile control. Lexus RX 2013–2015 RGB Multi-Color Sound Responsive App Controlled Adjustable Length Overview The Lexus RX has always been about sophisticated comfort and understated elegance. These LED Ambient Interior Light Strips elevate that philosophy by giving you total control over your cabin atmosphere—from classic warm whites to dynamic, music-synchronized color sequences that respond in real time to your playlist. Unlike basic single-color strips, this system delivers genuine RGB flexibility with millions of color combinations, adjustable brightness, and multiple lighting modes. The strips are easily cut to fit your exact cabin layout, whether you're accentuating the dashboard, door panels, footwells, or under-seat areas. Control everything from your phone or let the sound-reactive mode sync automatically with your music. Installation requires only basic tools and no permanent modification to your vehicle. The adhesive backing and wireless control mean you're up and running in under an hour, and if you ever decide to remove them, there's no residue or damage to worry about. What's Included 💡 LED Light Strips Pre-cut and ready to install 📱 Mobile App Controller Bluetooth-enabled, iOS & Android 🔌 Power Adapter Cigarette lighter or hardwire option 🛠️ Installation Hardware Mounting clips, connectors, adhesive Product Highlights RGB multi-color mode with 16 million color options Sound-reactive synchronization with music and audio input Mobile app control via Bluetooth (iOS & Android) Adjustable brightness and fade speed settings Cuttable strips: customize length for any cabin layout Low-heat, energy-efficient LED technology Adhesive backing for easy, non-permanent installation Multiple lighting modes including strobe, pulse, and chase IP65 water resistance for reliability in humidity 12V DC compatible with standard vehicle electrical Compatibility Model Year Range Compatibility Lexus RX 350 2013–2015 Direct Fit Lexus RX 450h 2013–2015 Direct Fit Lexus RX 270 2013–2015 Direct Fit Lexus RX (pre-2013) 2009–2012 Not Compatible Lexus RX (post-2015) 2016+ Not Compatible Installation Notes Difficulty: Easy | Time: 45–60 minutes Disconnect the negative battery terminal to ensure electrical safety. Measure and plan your strip placement (dashboard, door trim, footwells, under-seat). Clean and dry all surface areas where adhesive will contact the cabin. Peel backing and firmly press strips into place, working in sections to avoid wrinkles. Route the power cable discretely along trim lines toward your power source. Connect to cigarette lighter outlet or hardwire to battery (refer to included wiring diagram). Download the mobile app, pair via Bluetooth, and test all lighting modes. Reconnect the battery terminal and enjoy your new ambient lighting. Important: If hardwiring to the battery, always use an inline fuse holder rated for 10A and connect through the positive terminal via a relay switch. Do not bypass safety components. Consult a professional if you're unsure about electrical connections. Upgrade Your Lexus RX Cabin Today Transform your daily commute and weekend drives with customizable ambient lighting that's as sophisticated as your Lexus RX. Control every color, sync to your music, and enjoy a premium cabin experience that rivals factory ambient systems. Got multiple accessories in mind? Use code 22GET20 for 20% off any 2 items. Shop Now 4.9★ 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Lexus or Toyota Motor Corporation. Lexus is a registered trademark of Toyota Motor Corporation. All product specifications and compatibility information are provided for reference only. Installation should only be performed by qualified professionals. Victorious Automotive assumes no liability for improper installation or use.

Victorious Automotive · Range Rover Sport L461 · Front Grille LED Black Front Grille – Range Rover Sport L461 (2022–2024+) A direct-fit gloss black front grille with integrated white LED strips — engineered for the L461 Range Rover Sport to deliver a commanding, illuminated presence day and night. L461 LED Lighting 2022–2024+ Gloss Black ABS Construction Direct Fit Plug & Play No Modifications Overview The Range Rover Sport L461 arrived in 2022 as a sharper, more driver-focused evolution of one of Land Rover's most celebrated nameplates. Its front-end design is already bold — but for owners who want to push the aesthetic further, the factory grille leaves room to make a real statement. This is where our LED Black Front Grille steps in. Finished in a deep gloss black with integrated white LED light strips running through the grille slats, this upgrade transforms the front of your L461 Sport into something noticeably more aggressive and modern. Whether parked under streetlights or arriving at night, the illuminated grille creates an unmistakable visual signature that stands well apart from the standard fit. Built from high-grade ABS plastic with a UV-resistant gloss finish, this grille is engineered to endure. It mounts directly onto your existing factory mounting points — no drilling, no cutting, no fabrication. The LED wiring is kept equally straightforward, connecting cleanly to your sidelights or DRLs for a result that looks like it left the factory that way. What's Included 🖤 LED Front Grille Gloss black ABS with integrated white LED strips 🔌 LED Wiring Harness Pre-wired connector for DRL or sidelight integration 🔩 Mounting Hardware Clips and fixings to suit factory mounting points 📄 Fitting Guide Step-by-step installation reference included Product Highlights Integrated white LED light strips for a premium, modern illuminated look Deep gloss black finish — UV-resistant coating built to hold its colour Direct replacement for the factory L461 front grille — no modifications required High-grade ABS construction — lightweight, strong, and impact-resistant Plug-and-play LED wiring harness — connects to DRLs or sidelights Precision-engineered to align with the L461's factory front bumper and bodywork Dramatically changes the front-end character from refined to performance-focused Equally impactful in daylight or at night — a true all-hours upgrade Professional-quality finish that matches OEM paint standards Compatible with all standard L461 Sport trims (excluding factory SV grille variants) Compatibility Vehicle Code Years Trim Fitment Range Rover Sport L461 2022, 2023, 2024+ S, SE, Dynamic SE Direct Fit Range Rover Sport L461 2022, 2023, 2024+ Dynamic HSE Direct Fit Range Rover Sport L461 2022, 2023, 2024+ Autobiography Direct Fit Range Rover Sport L461 2022, 2023, 2024+ SV (factory grille) Not Recommended Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L460 2022+ All Trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes Open the bonnet and carefully remove the front bumper upper trim retaining clips using a trim removal tool. Disconnect the factory grille by releasing the OEM mounting clips along the top and bottom edges — no tools required for most clip points. Carefully unplug any factory wiring connected to the grille surround (if applicable) and set the original grille aside. Offer up the new LED grille to the bumper aperture and press firmly into the factory clip locations until each point clicks securely into place. Route the LED wiring harness through the bumper cavity toward your DRL or sidelight wiring loom — use the existing factory cable channels where possible. Connect the LED harness to your chosen power source (DRLs or sidelights). Test the LEDs before fully securing any loose wiring. Secure the harness with cable ties, refit any removed trim pieces, and carry out a final visual inspection to confirm alignment and fit. ⚠ Note: Professional installation is recommended for the LED wiring stage. Incorrect wiring connections can affect vehicle electronics. Always disconnect the battery before beginning any electrical work. If in doubt, consult a qualified automotive electrician. Aggressive. Illuminated. Unmissable. Whether you're building a blacked-out Sport or simply want a front end that commands a second look, this grille delivers. Shop the full L461 Range Rover Sport collection for more upgrades that match this aesthetic perfectly. Shop All L461 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Upgrades LED Crystal Gear Shift Knob – Toyota Land Cruiser 250 / Prado LC250 (2024–2025) A premium crystal gear shift knob with dynamic 5-colour LED ambient lighting, engineered as a direct-fit replacement for the 2024–2025 Toyota Land Cruiser 250 and Prado LC250. LC250 Prado LC250 2024–2025 Crystal Finish LED Ambient Lighting 5-Colour Dynamic Direct Fit Interior Upgrade Wood Grain Option Fibre Pattern Option Overview The Toyota Land Cruiser 250 and Prado LC250 represent a new era for one of the world's most respected off-road platforms. With a significantly elevated interior compared to its predecessor, the LC250 sets a higher expectation for cabin quality — and the shift knob, as the most-touched surface during any drive, deserves to reflect that standard precisely. This LED Crystal Gear Shift Knob is purpose-built for the 2024 and 2025 Land Cruiser 250. The high-permeability crystal housing catches and diffuses interior light beautifully at rest, while the integrated 5-colour dynamic LED system creates a controlled ambient glow around the base and logo that shifts fluidly through your chosen colour mode. It's a detail that reads as factory-intentional rather than aftermarket-obvious. Available in wood grain and fibre pattern finishes to complement your LC250's interior trim, this knob slots directly into the factory location — no modifications, no cutting, no guesswork. It's the kind of upgrade that rewards you every time you reach for the selector. What's Included 💎 LED Crystal Gear Shift Knob 1 x unit — direct replacement, ready to install 🔌 Wiring Connector Pre-fitted LED connection harness 📄 Installation Guide Step-by-step fitting instructions included 🔩 Mounting Hardware All required fixings for secure fitment Product Highlights Dynamic 5-colour LED system — customisable ambient glow around the shift knob base High-permeability crystal construction — refracts light beautifully in any cabin lighting Special luminous logo inlay — subtle branded detail that glows without being garish Direct OEM replacement fitment — no drilling, cutting or modification required Available in wood grain and fibre pattern — choose to match your interior trim Comfortable ergonomic grip geometry — shaped for natural hand placement during driving Durable construction — crystal and premium base materials built for daily use Colour modes cycle through — select or cycle colours to match your mood or cabin theme Low-profile LED integration — lighting is embedded, not surface-mounted Plug-and-play LED connection — connects to vehicle power via existing harness points Compatibility Model Year Variant Fitment Toyota Land Cruiser 250 2024 All trim levels Direct Fit Toyota Land Cruiser 250 2025 All trim levels Direct Fit Toyota Prado LC250 2024 All trim levels Direct Fit Toyota Prado LC250 2025 All trim levels Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All variants Not Compatible Toyota Land Cruiser 200 (LC200) All years All variants Not Compatible Toyota Prado 150 All years All variants Not Compatible Installation Notes Difficulty: Easy · Estimated Time: 20–40 Minutes · Tools Required: Trim removal pry tool, cloth Ensure the vehicle is switched off and in Park (P) before beginning any work around the gear selector area. Carefully unscrew or unclip the OEM gear shift knob from the selector shaft — refer to your LC250 owner's manual for the exact removal method for your trim level. Disconnect the factory wiring harness from the original knob if applicable and set the OEM unit aside safely. Route the LED wiring harness from the new crystal knob down through the selector shaft housing to your chosen power connection point. Connect the LED harness to vehicle power — typically via the 12V accessory or interior lighting circuit. Consult the included wiring guide for the correct connection. Thread the new LED Crystal Gear Shift Knob onto the selector shaft, ensuring it seats flush and locks securely in position. Power on the vehicle and test LED operation — cycle through colour modes to confirm all functions are working correctly. Refit any surrounding trim panels removed during installation and inspect the finished result. ⚠ Note: Confirm exact compatibility with your vehicle's year, trim and selector type before purchase. If you are unsure about any wiring connections, professional installation is strongly recommended. Incorrect wiring can affect vehicle electronics. Elevate Every Shift in Your LC250 Explore the full range of Toyota Land Cruiser LC250 interior accessories at Victorious Automotive — precision-selected upgrades for owners who expect more from their cabin. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious · Toyota Land Cruiser LC300 · Interior LED Crystal Handle Gear Head for Toyota Land Cruiser 300 LC300 Dynamic 5-color LED lighting and precision-engineered crystal grip elevate your interior in seconds. LC300 2021–2023 LED Crystal Direct Fit Premium Interior 5-Color Dynamic Overview The Toyota Land Cruiser LC300 defines capability and luxury. This LED Crystal Handle Gear Head respects that legacy while injecting a contemporary edge—the kind of upgrade that catches attention every time you reach for the shift. Our crystal design combines optical clarity with precision engineering. Five dynamic LED colors create immersive ambient lighting, cycling through or fixed to your mood. The luminous Toyota logo and high-permeability crystal material deliver the kind of tactile and visual refinement that separates good interiors from unforgettable ones. Installation takes under 30 minutes and requires no permanent modifications. Engineered for direct fitment on 2021–2023 LC300 models, this is the kind of thoughtful upgrade that transforms your ownership experience—subtly, but unmistakably. What's Included ✨ LED Crystal Gear Head Precision-cut crystal with integrated 5-color LED circuit 📋 Installation Guide Step-by-step English instructions with wiring diagram 🔌 Wiring & Connectors OEM-spec harness and quick-connect terminals included 🛡️ Quality Guarantee 30-day money-back promise, full parts warranty Product Highlights Dynamic 5-color LED lighting—cycle or lock to your preferred shade High-permeability optical crystal with Toyota luminous logo OEM-level fitment—no cutting, drilling, or permanent changes Ergonomic grip design elevates interior grade and tactile quality Integrated LED circuit with smooth color transition modes Wiring harness pre-assembled for tool-free installation Durable UV-resistant crystal resists discoloration and scratching Low-power LED draws negligible current from vehicle battery Complements factory interior trim and dashboard aesthetics Tested across 2021–2023 LC300 production variations Compatibility Model Year Range Status Toyota Land Cruiser 300 (LC300) 2021–2023 Direct Fit Toyota Land Cruiser 250 (LC250) 2024+ Not Compatible Toyota Land Cruiser 200 (Pre-2021) –2020 Not Compatible Compatibility Note: Confirm your exact model year and VIN before ordering. This part is engineered exclusively for the J300 platform (2021–2023). Fitment on earlier or newer generations is not supported. Installation Notes Difficulty: Easy | Time: 20–30 minutes Disconnect the negative terminal of the vehicle battery. Gently pry the original gear head from its housing using the provided plastic lever (included in kit). Unplug the factory wiring connector, noting its orientation. Align the new LED crystal gear head with the mounting slots and insert firmly until it clicks into place. Connect the pre-assembled LED harness to the factory connector. The harness includes a color-coded diagram. Route excess wiring along the factory path beneath the center console using cable clips (included). Reconnect the battery terminal and test all five LED color modes using the interior control panel. Verify no rattling or movement by gently rocking the gear head side to side. Professional Installation: If you're unfamiliar with automotive electrical work, we recommend professional installation. Many workshops can complete this upgrade in under 1 hour. Contact us at +44 203 943 9919 for installer recommendations in your region. Elevate Your LC300 Interior This isn't just a gear head—it's a statement of refinement. Every shift becomes an experience. Order today and transform your cabin with premium engineering and bespoke lighting. Shop LC300 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ Reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee 📞 Expert Support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket supplier. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Lexus, or any official Toyota dealership. All product names and logos are trademarks of their respective owners and are used for identification purposes only. Installation of aftermarket parts may affect your vehicle warranty. Always consult your owner's manual or dealership before installation.

Victorious Automotive · Mercedes G-Class · Lighting LED Daytime Running Lights for Mercedes G-Class G500, G350, G63, G65 (1990–2017) Iconic G-Wagon styling meets modern LED efficiency—sharper presence on every drive. G-Class 1990–2017 LED DRL Plug & Play Dual Colour Overview The Mercedes G-Class has defined off-road luxury for over three decades. From the original G500 through the high-performance G63 and G65, this icon demands lighting that matches its presence. These LED Daytime Running Lights upgrade your front end with sharper definition, improved visibility, and a thoroughly modern aesthetic that respects the G-Wagon's timeless design language. Engineered with premium materials and certified to rigorous standards, these DRLs blend seamlessly into the G-Class's distinctive fascia. Available in two colour options, they complement both classic and modern interpretations of the platform—whether you're running a 1990s workhorse or a contemporary performance variant. Installation is straightforward on most variants. Enhanced visibility in daylight hours improves safety, while the modern LED profile adds a subtle accent to your G-Class's commanding road presence. A practical upgrade that feels authentic to the vehicle's character. What's Included 💡 LED DRL Pair Complete left & right units, ready to install 📋 Installation Guide Clear instructions for your G-Class variant 🔧 Hardware & Connectors All fixings and electrical connectors included ✓ 30-Day Guarantee Full refund if not satisfied, no questions Product Highlights Dual colour options to suit your G-Class aesthetic Enhanced daytime visibility—safety & style combined Premium material blend (PP + PU + ABS) for durability All-weather performance across temperature extremes CCC certified—meets rigorous testing standards Modern LED efficiency over traditional halogen Lightweight at just 1kg per pair Compact 25cm diameter profile Compatible with 1990–2017 model range Straightforward plug-and-play installation on most variants Compatibility Model Year Range Compatibility Mercedes G-Class G500 1990–2017 Direct Fit Mercedes G-Class G350 2003–2012 Direct Fit Mercedes G-Class G63 2012–2017 Direct Fit Mercedes G-Class G65 2012–2017 Direct Fit Other G-Class variants (pre-1990) Pre-1990 Not Compatible Installation Notes Difficulty Level: Beginner to Intermediate Most G-Class owners can complete installation in 30–60 minutes per side. Basic hand tools and electrical connectors required. Disconnect the negative terminal from your G-Class battery for safety. Remove the existing front bumper or access panel (model-specific). Unplug the factory light connectors and set them aside. Position the new LED DRL units using the supplied brackets and hardware. Secure all fixings and ensure units sit flush with the fascia. Connect the provided electrical connectors to the OEM wiring harness. Reconnect the battery and test both units on low and high beam cycles. Verify alignment and seal any gaps with weatherproofing (optional but recommended). Important: If you're uncomfortable working with electrical systems or removing bumper components, we recommend professional installation by a Mercedes specialist. Many independent workshops can fit these DRLs in under an hour. Ready to Upgrade Your G-Class? These LED Daytime Running Lights are engineered for G-Class owners who refuse to compromise on either aesthetics or quality. Modern presence, proven durability, and hassle-free installation—shipped worldwide and backed by our 30-day guarantee. Shop G-Class Lighting Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket parts supplier. We are not affiliated with Mercedes-Benz, Daimler, or any official Mercedes subsidiary. All vehicle names, logos, and specifications are used for reference purposes only. Always verify fitment with your vehicle's specific year, engine, and transmission variant before purchase. Installation may require professional support; consult your Mercedes dealer or specialist if unsure.

```html Victorious Automotive · Toyota Land Cruiser LC300 · Interior Lighting LED Door Threshold for 2021–2024 Toyota Land Cruiser LC300 Precision-engineered illuminated door sill with bespoke LC300 badging—seamless fit, premium finish, instant presence. LC300 2021–2024 ABS + LED Direct Fit Interior Overview The Toyota Land Cruiser LC300 is engineered for refinement and capability—a machine that commands presence both on the road and at the boardroom. This LED Door Threshold preserves that aesthetic authority by replacing factory sills with a bespoke illuminated unit that welcomes occupants with a subtle yet unmistakable glow. Unlike generic aftermarket thresholds, this unit is designed specifically for LC300 geometry. It features engraved LC300 branding, precision-fit ABS construction, and integrated LED illumination that activates as doors unlock or open. The result is a cabin entrance that feels intentional, upmarket, and distinctly yours. Whether you're upgrading your personal Land Cruiser or curating the perfect fleet machine, this threshold combines form and function—no cutting, no fitment guesswork, no compromise. What's Included 📦 LED Door Threshold Bar Engraved LC300 branding, full-width sill 📋 Installation Guide Step-by-step instructions + demo video link 🔧 Hardware Pack All fixings and wiring connectors included ✅ 30-Day Guarantee Full money-back if not satisfied Product Highlights Engraved LC300 branding for authentic customization Premium LED illumination with warm white temperature Direct-fit design—no drilling, cutting, or fabrication required Durable ABS material resists cracking and UV damage Integrated wiring harness for seamless door trigger Low-current draw—negligible battery impact Factory finish matches OEM cabin trim quality Activates with door unlock and open events Fits all 2021–2024 LC300 door apertures Enhanced entry experience—practical and stylish Compatibility Model Year Range Status Toyota Land Cruiser LC300 2021–2024 Direct Fit Toyota Land Cruiser LC250 2024+ Not Compatible Earlier LC200, LC100 Pre-2021 Not Compatible Installation Notes Difficulty Level: Moderate | Time Required: 45–60 minutes Open all four doors and locate the factory door sill trim along the lower interior aperture frame. Carefully pry and detach the existing sill using a plastic trim removal tool—work around all clips and fasteners. Disconnect any existing wiring from the factory sill (if equipped with courtesy lighting). Position the new LED threshold unit into the door aperture channel—ensure alignment on both sides. Secure the unit with supplied fasteners, working from the center outward to maintain even pressure. Connect the LED wiring harness to the vehicle's door latch module using the included connector—no soldering required. Test both door locks and opens to confirm illumination triggers correctly. Close all doors and verify final fitment is flush with the door frame. ⚠ Important: Disconnect the vehicle battery before beginning electrical work. If you are not comfortable with interior trim removal or wiring, consult a qualified Toyota specialist or contact our team for guided installation support. Ready to Elevate Your LC300 Entrance? The details matter. A bespoke LED door threshold transforms every entry into a moment of intention—proof that your Land Cruiser is as refined as it is capable. Order yours today and experience the difference precision customisation makes. Shop LC300 Upgrades Use code 22GET20 for 20% off any 2 items 4.9/5 • 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 • Mon–Fri 9am–7pm Victorious Automotive is not affiliated with Toyota Motor Corporation, Land Cruiser, or any official Toyota division. All product names, logos, and brands are property of their respective owners. This product is designed as an aftermarket accessory and does not carry any factory warranty from the vehicle manufacturer. ```

Victorious Automotive · Defender L663 · Exterior Lighting LED Fog Lights Kit with Daytime Running Lights & Wiring Harness — Land Rover Defender L663 2020–2022 Sharper front-end presence and all-weather visibility in a single direct-fit LED upgrade, purpose-built for the L663 Defender's bumper architecture. Defender L663 2020 · 2021 · 2022 LED Fog Lights Daytime Running Lights ABS Lens Housing 12V System Includes Harness Front Fitment Overview The Land Rover Defender L663 is a vehicle defined by intention — every panel, every surface angle, every light cluster carries visual weight. If you're running the 2020–2022 model and the stock front-end foglights feel like an afterthought, this LED kit exists to correct that. Engineered to slot directly into the lower front bumper apertures of the L663, these lights deliver a crisper, more purposeful look that brings the Defender's face in line with its character. This kit combines high-output LED fog lamps with integrated daytime running light functionality, giving you two roles from a single unit. The LED array operates on the standard 12V system and draws significantly less current than conventional halogen fog units — meaning less load on the alternator and a longer service life without any sacrifice in forward light output. The ABS plastic lens housing is impact-resistant, well-suited to the debris and weather the Defender routinely encounters. The complete wiring harness is included, removing the need to source third-party connectors or splice directly into the loom. The result is a cleaner install with a factory-adjacent finish. This is the kind of upgrade that looks like it should have come from the factory — and that's precisely the point. What's Included 💡 LED Fog Light Units (x2) Left & right front fitment, ABS lens housing 🔌 Wiring Harness Pre-wired loom for direct connection, no splicing required 🔧 Mounting Hardware Fixings required for fitment to bumper aperture 📄 Fitment Instructions Step-by-step guide for installation reference Product Highlights Dual-function LED units — fog light and DRL in one 100% brand new — not refurbished or remanufactured ABS plastic lens — impact-resistant and weather-sealed 12V direct compatibility with L663 Defender electrical system Low power consumption — reduced alternator load vs. halogen Complete wiring harness included — no third-party loom needed Front bumper fitment — purpose-designed for L663 architecture High-intensity LED array — improved forward light throw Clean factory-style aesthetic — no exposed wiring or aftermarket look Straightforward two-light kit — symmetrical left and right units Compatibility Model Code Year Range Fitment Land Rover Defender 90 L663 2020 · 2021 · 2022 Direct Fit Land Rover Defender 110 L663 2020 · 2021 · 2022 Direct Fit Land Rover Defender 130 L663 2022 Direct Fit Land Rover Defender (Classic) L316 Pre-2020 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Trim removal tools, panel cutters, screwdrivers Ensure the vehicle is on level ground with the ignition off and the 12V system fully isolated before beginning any electrical work. Remove the lower front bumper trim panels using appropriate trim removal tools to expose the existing fog light apertures on both sides. Carefully cut out the relevant sections of the original plastic bumper insert as required to allow each LED unit to seat flush and securely — measure twice before cutting. Slot each LED fog light unit into the prepared aperture and secure using the supplied mounting hardware, ensuring a firm and rattle-free fit. Route the wiring harness through the bumper cavity, connecting each unit to the harness connectors and ensuring the loom is secured away from any heat or moving components. Connect the harness to the vehicle's existing fog light circuit and restore the bumper trim panels, checking alignment before final fixing. Restore power to the vehicle and test both the fog light and DRL functions before completing the installation. ⚠ Important: This installation requires permanent modification to the original plastic bumper insert. Please ensure you are comfortable with this before proceeding. If in doubt, we recommend having the fitment carried out by a qualified automotive technician. This modification cannot be reversed once the cutting is complete. Built for Defenders. Trusted by Enthusiasts. Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium exterior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product images are for illustrative purposes only; minor variations in finish or colour may occur.

Victorious Automotive · Range Rover Sport L461 · Lighting Upgrades LED Front Bumper Fog Lights – Range Rover Sport 2023+ (L461) A direct-fit LED fog light upgrade engineered specifically for the 2023-onwards Range Rover Sport L461 — delivering sharper illumination, a refined front-end aesthetic, and true plug-and-play installation. L461 2023–2026 LED Technology Plug & Play Weather-Sealed Housing OEM-Style Fitment Left + Right Pair No Coding Required Overview The 2023-onwards Range Rover Sport L461 represents Land Rover's most technically advanced Sport iteration to date — and every detail of its exterior has been designed with precision and purpose. The front bumper fog light housings are a key part of that visual language, and if your vehicle came without factory LED fogs, or you're looking to replace ageing units with a sharper, more modern solution, this upgrade delivers exactly that. These LED Front Bumper Fog Lights have been developed as a precision replacement for the L461's factory fog light positions. Using high-output LED emitters paired with crystal-clear optics, they produce a wide, well-defined beam pattern that genuinely improves low-visibility driving — whether that's fog, heavy rain, or unlit country lanes. The output is measurably brighter than standard halogen equivalents, while drawing significantly less current from your vehicle's electrical system. The fitment is OEM-standard. The housings slot directly into your existing bumper apertures, the connectors match your factory loom, and no software coding or modification is required. The result is a seamless, factory-quality upgrade that looks as though it left the production line that way — cohesive with your DRLs and the broader lighting signature of the L461. What's Included 💡 LED Fog Light – Driver Side (Left) Direct-fit left-hand bumper unit with integrated LED assembly 💡 LED Fog Light – Passenger Side (Right) Matched right-hand bumper unit for symmetrical installation 🔌 Wiring Harness Included where required for vehicles upgrading from halogen or blank fog positions 📄 Fitment Guide Step-by-step installation reference for confident DIY fitting Product Highlights High-output LED emitters — significantly brighter than factory halogen fog lights with lower current draw Crystal-clear polycarbonate lens for a sharp, wide beam pattern optimised for poor-weather driving OEM-style plug-and-play fitment — connects directly to the factory loom on L461 models No software coding required — recognised by the vehicle's electrical system as a standard replacement Weather-sealed housing construction rated for all-weather use including heavy rain and road spray Precision-matched aesthetic to complement the L461's factory DRLs and front lighting signature Durable UV-resistant lens coating — resists yellowing and hazing over time Sold as a complete left and right pair — no mismatched output or colour temperature between sides Low heat output compared to halogen — extends the life of surrounding bumper materials Designed specifically for the L461 chassis — not a generic universal fitment Compatibility Model Chassis Code Year Range Trim Fitment Range Rover Sport L461 2023 – 2026 SE / Dynamic SE / Autobiography / First Edition Direct Fit Range Rover Sport L461 2023 – 2026 Trims with bumper fog light apertures Direct Fit Range Rover Sport L494 2013 – 2022 All Trims Not Compatible Range Rover Vogue L460 2022 – 2026 All Trims Not Compatible Range Rover Vogue L405 2013 – 2021 All Trims Not Compatible Defender L663 2020 – 2026 All Trims Not Compatible Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Trim removal tools, T20 Torx driver Ensure the vehicle is parked on a level surface with the ignition off and key fob away from the vehicle to prevent accidental electrical activation. Using a trim removal tool, carefully unclip the existing fog light surround or blank cover from the front bumper aperture — work from the outer edges inward to avoid marking the bumper finish. Disconnect the factory wiring connector from the existing fog light unit (if present) by pressing the release tab and pulling firmly but carefully. Remove the factory fog light housing by releasing the retaining clips or Torx screws securing it to the bumper bracket — retain all fixings for reuse. Position the new LED fog light unit into the aperture, ensuring the housing tabs align correctly with the bumper mounting points, then secure using the original fixings. Connect the factory wiring loom to the new LED unit — the connector is keyed and will only mate correctly in one orientation. If fitting the supplied wiring harness, route it neatly through the bumper void and secure with cable ties. Restore the trim surround, reconnect the vehicle, and test both fog lights at the switch before reassembling fully. Please Note: Professional installation is recommended for vehicles where the fog light apertures are currently blanked off, as additional wiring routing may be required. Always verify your specific trim level includes fog light switch functionality before purchasing. If in any doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm suitability before you order. Sharper Light. Smarter Look. Designed exclusively for the Range Rover Sport L461, these LED fog lights are one of the cleanest functional upgrades you can make to your front end — improving visibility in poor conditions while elevating the overall visual coherence of the vehicle's lighting signature. Browse our full L461 accessory collection for everything else your Sport deserves. Shop All Range Rover Sport L461 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, chassis codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Defender L663 · Exterior Styling LED Front Grille for Land Rover Defender 2020–2026 (L663) — Integrated Daytime Running Lights A direct-fit front grille upgrade for the Defender L663 that brings integrated LED daytime running lights, a sharper face, and a presence that commands the road — day or night. Defender L663 2020–2026 LED DRL Integrated Direct Fit Front Grille Exterior Upgrade No Cutting Required Easy Installation Overview The Land Rover Defender L663 is one of the most iconic off-road platforms of its generation — a vehicle that balances genuine capability with a deliberately bold aesthetic. Whether you're running the 90 or 110 body, the front end is the first thing the world sees, and it deserves to make the right statement. The stock grille does its job, but for owners who want something with more visual authority and modern lighting presence, there's a better option. This LED Front Grille is precision-engineered to fit the Defender L663 (2020 onwards) without modification to your bodywork or wiring loom. Built into the grille surround are integrated daytime running lights that activate seamlessly with your vehicle's existing DRL circuit — giving the Defender a wider, more aggressive lighting signature that reads distinctly on the road. The result is a front-end transformation that looks factory-fitted, not aftermarket. At Victorious Automotive, every exterior upgrade we carry is tested for fitment quality and finish consistency. This grille is no exception. The installation process is straightforward enough for a driveway job, and we've included a full video walkthrough so you can see exactly what's involved before you commit. If you have any questions before ordering, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. What's Included 🔲 LED Front Grille Assembly Full surround with integrated LED strip, pre-wired 💡 Integrated DRL Strip Built into the grille frame — no separate housing needed 🔌 Wiring Harness Pre-terminated connectors for direct plug-in fitment 🔩 Fitting Hardware All clips, fixings and fasteners included 📄 Installation Guide Step-by-step instructions with video link reference Product Highlights Integrated LED daytime running lights built into the grille surround Direct-fit design for Defender L663 — no cutting, no modification Plug-and-play wiring connects to factory DRL circuit High-output LEDs deliver a wide, even lighting signature Premium ABS construction with UV-resistant finish Maintains full airflow to the radiator and cooling system Works with both Defender 90 and 110 body configurations Visually elevates the front end beyond the standard stock grille Designed to pass UK and EU road legality requirements Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal kit, basic hand tools Open the bonnet and ensure the vehicle is powered off and keys are removed from the ignition before beginning work. Carefully remove the factory front grille using a trim removal tool, releasing the retaining clips around the perimeter. Take your time to avoid marking the bumper surround. Disconnect any existing grille-mounted sensors or camera connections if applicable and note their positions for reassembly. Offer up the new LED front grille assembly to the aperture and route the wiring harness through to the engine bay before clipping the grille into position. Connect the pre-terminated DRL wiring harness to the vehicle's factory daytime running light feed. The connectors are plug-and-play — no splicing is required. Press the grille firmly around all edges to ensure every clip is fully seated. Test the LED strip by switching the vehicle on and checking DRL operation before closing the bonnet. Tidy any excess wiring with the included clips and conduct a final visual inspection to confirm alignment and fitment. Note: We strongly recommend watching the full installation video (linked below) before beginning. If you are unsure at any stage, please contact our team on +44 203 943 9919 or consult a professional installer. Incorrect wiring connections may affect vehicle electronics — always refer to your vehicle's DRL circuit before connecting. Installation Video Watch the full step-by-step installation walkthrough below before you begin. The process is straightforward, but seeing it done first makes all the difference. Upgrade Your Defender. Own the Road. The Defender L663 deserves a front end that commands attention. Browse the full range of Defender exterior upgrades at Victorious Automotive — and save 20% when you add any two items to your order. Shop All Defender L663 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Defender L663 · Exterior Lighting LED Front Grille Light Bar V2 for Land Rover Defender 2020+ L663 90 / 110 / 130 Second-generation LED grille light bar engineered specifically for the Defender L663 — delivering integrated daytime running light performance with a factory-cohesive aesthetic. Defender L663 2020–2026 90 · 110 · 130 LED DRL Direct Fit Gen 2 Plug-and-Play Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle that commands attention by design — bold proportions, a purposeful face, and a grille that defines its character. For owners who want to push that presence further while enhancing real-world visibility, the front grille is the most impactful starting point. Any modification here must respect the Defender's visual language while elevating it with modern precision. The Victorious LED Front Grille Light Bar V2 is the refined successor to our original grille lighting solution, engineered with direct feedback from the Defender community. The Gen 2 design integrates a continuous LED light bar seamlessly within the grille aperture, adding integrated daytime running lights that sit flush with the surrounding bodywork. The result is a look that feels intentional — as if Land Rover's design team had always planned for it. Beyond aesthetics, the functional benefit is genuine. Increased daytime visibility makes a meaningful difference in low-contrast conditions — overcast motorways, rural lanes, or early morning commutes — without any compromise to the Defender's rugged identity. The plug-and-play wiring system means no splicing, no guesswork, and no dealer visits required. What's Included 💡 LED Grille Light Bar (Gen 2) Single full-width unit, pre-assembled 🔌 Wiring Harness Plug-and-play connector set included 🔩 Mounting Hardware Kit All fixings and brackets required 📄 Installation Manual Step-by-step printed guide Product Highlights Second-generation design with refined LED output and improved light diffusion Integrated daytime running lights for enhanced road presence and safety Direct-fit application — no cutting, drilling, or bodywork required Plug-and-play wiring compatible with factory Defender L663 harness Fits all three Defender L663 body variants — 90, 110, and 130 LED technology for low power draw, high output, and long service life Flush-mount installation maintains clean, factory-cohesive grille profile Durable construction rated for all-weather and off-road environments Visually complements both standard and accessorised Defender builds Straightforward home installation achievable in under two hours Compatibility Model Code Year Range Fit Defender 90 L663 2020 – 2026 Direct Fit Defender 110 L663 2020 – 2026 Direct Fit Defender 130 L663 2020 – 2026 Direct Fit Defender 90 / 110 (Classic) L316 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Beginner–Intermediate  |  ⏱ Estimated Time: 60–90 Minutes Ensure the vehicle is parked on level ground with the engine off and ignition removed from the vehicle before beginning. Carefully remove the factory front grille by releasing the retaining clips along the top and side edges — no special tools required. Position the LED Grille Light Bar V2 into the grille aperture and align with the provided mounting points. Secure using the included bracket hardware. Route the wiring harness behind the grille panel and through to the vehicle's engine bay, following the existing factory cable channels where possible. Connect the plug-and-play harness to the appropriate factory connector — refer to the installation manual for the specific connector location on L663 models. Refit the front grille panel, pressing firmly along all clip points until fully secured. Reconnect the vehicle ignition and test the LED light bar function before completing the installation. ⚠ Important: Confirm your exact Defender variant (90, 110, or 130) and production year before installation. An installation video is available online for additional reference. If you are unsure at any stage, consult a qualified automotive technician. Incorrect wiring connections may affect vehicle electronics. Upgrade Your Defender. Define Your Drive. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium accessories that are engineered to fit, built to last, and designed to impress. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Defender L663 · Exterior Styling LED Front Grille V3 for Land Rover Defender 2020–2026 (L663) Transform the face of your Defender L663 with an integrated LED daytime running light grille that delivers a commanding, modern presence straight out of the box. Defender L663 2020–2026 Direct Fit LED DRL Front Grille V3 Design Exterior Styling Plug & Play Overview The Land Rover Defender L663 is one of the most recognisable vehicles on the road — a modern reinterpretation of an icon that carries serious intent. Its front fascia is the centrepiece of that identity, and for owners who want to push the aesthetic further, the factory grille leaves room on the table. The LED Front Grille V3 addresses that directly, replacing the standard unit with a purposefully designed alternative that reframes the Defender's face entirely. This is the third-generation iteration of our most popular Defender exterior upgrade. The V3 design incorporates a full-width LED daytime running light strip integrated cleanly into the grille structure itself, producing a continuous, high-output light signature that works in harmony with the Defender's existing DRL system. The result is a cohesive, factory-plausible aesthetic that reads as deliberate rather than aftermarket — precisely the kind of upgrade that turns heads without announcing itself. Designed and validated specifically for the L663 platform, the grille uses the factory mounting points for a direct, rattle-free fit. There are no custom brackets required and no modifications to your Defender's body or electrical system. The wiring integrates with your existing front lighting loom via a simple plug-and-play connector, making this a genuinely accessible upgrade regardless of your mechanical background. What's Included 🔲 LED Front Grille V3 Complete grille assembly with integrated LED strip 🔌 Plug & Play Wiring Harness Pre-terminated connector for OEM loom integration 🔩 Fitting Hardware Kit All clips, fasteners, and retention pins included 📄 Installation Guide Step-by-step printed instructions with QR video link Product Highlights V3 design — refined over two previous generations for fit, finish and light output Integrated LED DRL strip runs the full width of the grille aperture Plug-and-play wiring — connects directly to the factory front lighting loom Uses OEM mounting points — no drilling, no modifications, no rattles Activates automatically with ignition — no separate switch required High-output LED elements rated for all-weather and low-visibility conditions Finished in gloss black with precision-moulded surround detailing Compatible with both Defender 90 and Defender 110 L663 variants Reversible installation — original grille can be refitted at any time Designed, tested, and validated for the 2020–2026 Defender L663 platform Compatibility Model Code Years Fit Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2022–2026 Direct Fit Defender 90/110 (Pre-2020) L316 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Not Compatible Range Rover Vogue L460 / L405 All Not Compatible Installation Notes ⚙️ Difficulty: Beginner Friendly  ·  ⏱ Estimated Time: 45–60 Minutes Park the Defender on a flat surface, switch off the ignition, and allow the engine to cool completely before beginning. Open the bonnet and locate the retaining clips securing the factory front grille to the bumper surround — these are typically accessible from behind the front fascia. Carefully release each clip using a trim removal tool, working from the outer edges inward to avoid stressing the surround. Disconnect the factory grille and set it aside safely. Locate the front lighting loom connector behind the grille aperture. Connect the supplied plug-and-play harness to the OEM connector — the terminals are keyed and will only mate in the correct orientation. Route the harness neatly behind the fascia, securing any excess with the provided cable ties to prevent contact with moving components. Align the LED Front Grille V3 with the factory mounting aperture and press firmly from the centre outward until all clips engage and the grille sits flush. Connect the LED harness to the grille's input connector, switch on the ignition, and verify DRL operation before closing the bonnet. ⚠️ Important: Always disconnect the vehicle's battery negative terminal before working near any electrical connectors if you are unfamiliar with live-circuit handling. If your Defender is under manufacturer warranty, consult your retailer before modifying any exterior components. Installation Video Watch our full step-by-step installation walkthrough above. Pause, rewind, and follow along at your own pace. Upgrade Your Defender. Make It Yours. The LED Front Grille V3 is one of the most impactful single upgrades available for the Defender L663 — and it's available now with worldwide shipping and our 30-day money-back guarantee. Browse the full Defender L663 collection for complementary exterior accessories. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Jaecoo J7 · Exterior Styling LED Gloss Black Centre Grille – Jaecoo J7 Premium illuminated front grille upgrade that delivers aggressive luxury styling and enhanced road presence for your Jaecoo J7. Jaecoo J7 Gloss Black Finish Integrated LED OEM-Style Fitment Exterior Upgrade Overview The Jaecoo J7 is a premium compact SUV that demands equally premium styling upgrades. This LED Gloss Black Centre Grille transforms your front-end presence with a bold, modern aesthetic inspired by luxury SUV design language. Whether you're building a custom SUV vision or simply upgrading your daily driver, this grille delivers the statement presence your J7 deserves. Built from durable, weather-resistant materials with an integrated LED lighting system, this centre grille replaces the factory unit with a sleek gloss black finish that catches light and attention. The premium construction ensures long-term durability across all climates, while the OEM-style fitment means no modifications to your vehicle's front bumper or body panels. Perfect for owners who appreciate aggressive modern styling and intelligent illumination. Pairs beautifully with carbon fibre accents, gloss black trim, and other premium aftermarket upgrades to complete a cohesive custom look. What's Included 🎯 LED Centre Grille Gloss black, fully integrated LED lighting ⚡ Wiring Harness Complete electrical connection kit 🔧 Installation Hardware Fasteners and mounting brackets Product Highlights Designed specifically for Jaecoo J7 fitment Premium gloss black finish with reflective quality Integrated LED grille lighting system Aggressive modern SUV styling language OEM-style fitment, no modifications needed Durable high-quality construction materials Weather-resistant design for all climates Enhanced front-end road presence and visibility Complements carbon fibre and black styling upgrades Complete installation hardware and wiring included Compatibility Jaecoo J7 Model Year Range Status Jaecoo J7 Standard 2023–2026 Direct Fit Jaecoo J7 All Variants All Years Direct Fit Important: Always confirm your exact model year and trim before ordering. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure of compatibility. Installation Professional Installation Recommended This upgrade involves front bumper removal and electrical wiring integration. We strongly recommend professional fitting by a qualified technician familiar with Jaecoo J7 service procedures. Difficulty Level Intermediate–Advanced / Estimated Time: 1.5–2.5 hours Installation Steps Safely raise and secure the Jaecoo J7 on a level surface Remove the front bumper fascia carefully (may require clip removal) Locate and disconnect the factory centre grille unit Remove mounting fasteners holding the original grille Position the new LED grille unit into the bumper opening Secure with provided installation hardware Connect the wiring harness to the vehicle's electrical system Test LED illumination and fitment alignment Reinstall the front bumper and verify all clips are secure Final quality check and alignment adjustment ⚠ Important: Wiring and installation requirements may vary depending on your J7's specific year and specification. Local regulations regarding exterior lighting vary by region—ensure LED operation complies with your local road safety standards before use. Design & Build Quality This centre grille is engineered from premium materials with a flawless gloss black finish that resists UV fading and environmental degradation. The integrated LED system is engineered for reliability and longevity, offering modern illumination without sacrificing durability. Every component has been precision-fitted to match Jaecoo J7 dimensions and styling proportions. The design philosophy is unmistakably premium: aggressive yet refined, modern yet timeless. This grille elevates your J7's front-end presence without compromising the vehicle's original design intent—it enhances it. Ready to Transform Your J7? Upgrade your Jaecoo J7's front-end styling with this premium LED centre grille. Premium design, flawless fitment, and exceptional durability—all backed by our 30-day money-back guarantee and 4.9★ customer reviews. Shop Jaecoo J7 Upgrades Use code 22GET20 for 20% off when buying 2 or more items ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping (DHL, FedEx, UPS, TNT) ✓ 4.9★ Rating from 12,300+ Reviews 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: This product is an aftermarket styling upgrade and is not affiliated with Jaecoo, Chery Automobile, or any official manufacturer. "Jaecoo," "J7," and related trademarks are property of their respective owners. Victorious Automotive is an independent accessory specialist. Always verify local regulations regarding aftermarket lighting before installation and use.

Victorious · Jaecoo J7 · Exterior LED Grille Light Insert for Jaecoo J7 Transform your J7's front-end with premium LED illumination for an aggressive, modern luxury aesthetic. Jaecoo J7 OEM+ Styling LED Illuminated Weather-Resistant Direct Fit Overview The Jaecoo J7 commands presence on every road. This LED Grille Light Insert elevates that statement further, integrating a sleek illuminated design into your vehicle's front grille that rivals premium luxury SUVs. Whether you're refining an understated daily driver or building a fully customised off-road platform, this upgrade delivers both aggressive styling and functional road presence. Engineered for direct fitment, the insert combines energy-efficient LED technology with weather-resistant construction, ensuring years of reliable performance without compromise. The modern OEM+ design language complements both gloss black and carbon-fibre accents seamlessly. Perfect for Jaecoo J7 owners who refuse to settle for stock. This is the accessory that transforms your front-end presence from capable to unmistakably premium. What's Included 💡 LED Grille Insert Premium illuminated unit, ready to fit ⚡ Wiring Harness Pre-assembled, plug-and-play integration 🔧 Installation Hardware Fasteners and brackets included Product Highlights Designed specifically for Jaecoo J7 fitment Premium LED technology, bright and efficient Modern OEM+ styling language Weather-resistant, sealed construction Improves front-end road presence instantly Perfect with gloss black and carbon upgrades Durable, long-lasting LED lifespan Direct fit, minimal modification required Enhanced vehicle visibility and aesthetics Ideal for custom and performance builds Compatibility Model Year Range Compatibility Jaecoo J7 2024+ Direct Fit Note: Please confirm your vehicle specification before purchasing. Wiring and installation requirements may vary. Local regulations regarding exterior lighting differ by region. Installation Difficulty: Intermediate | Time: 1–2 hours Disconnect the vehicle battery for safety. Remove the front grille cover using the appropriate tools. Carefully disconnect any factory wiring from the original grille components. Position the LED grille insert into the grille opening, ensuring alignment. Connect the wiring harness to the vehicle's electrical system (via fuse panel or headlight circuit as appropriate). Secure the insert using the provided fasteners and brackets. Reinstall the grille cover, ensuring a flush fit. Reconnect the battery and test all lighting functions before finishing. Professional installation recommended: Electrical integration and wiring configuration should be performed by a qualified technician to ensure proper function and compliance with local lighting regulations. Ready to Elevate Your J7? The LED Grille Light Insert isn't just a cosmetic upgrade—it's a statement of intent. Transform your Jaecoo J7 into the premium-presence SUV it was designed to be. Shop Jaecoo J7 Upgrades Apply code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars • 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping • DHL, FedEx, UPS, TNT ✓ Expert support • +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with Jaecoo, Chery Group, Land Rover, Jaguar Land Rover, or any OEM manufacturer. All product names and vehicle designations are used for identification and compatibility reference only.

Victorious · Defender · Lighting LED Headlights for Land Rover Defender Professional-grade LED headlight upgrade delivering 50,000+ hour lifespan and superior brightness with military-spec durability. Defender 90/110 1983–2016 Diecast Aluminium 6000K Daylight IP67 Waterproof 50,000hr Life Overview Your Land Rover Defender has earned its place as one of the most capable off-road vehicles ever built—but its original lighting systems weren't designed for modern trails or night driving. These professional LED headlights deliver the brightness and reliability your Defender deserves, whether you're navigating UK country roads or tackling serious terrain across continents. Built from aerospace-grade diecast aluminium 6063 with polycarbonate lenses, these units are engineered to withstand extreme conditions. Operating from 10–30V DC ensures compatibility across all Defender generations, while the optimised heatsink design keeps performance consistent mile after mile. At 6000K colour temperature, you get cool, crisp daylight-like illumination that reduces eye strain and improves visibility in all conditions. With an exceptional 50,000+ hour lifespan, vastly superior energy efficiency, and full IP67 waterproof certification, these LEDs represent a genuine upgrade—not just a cosmetic change. This is lighting engineered for expeditions, not showrooms. What's Included 💡 LED Headlight Unit 6000K daylight, 50,000hr rated ⚙️ Internal Heatsink Optimised cooling system 📋 Installation Guide Step-by-step instructions 🔌 Electrical Connector 10–30V DC compatible Note: Mounting brackets are ordered separately—choose your vehicle variant at checkout to ensure compatibility. Product Highlights 50,000+ hour lifespan—genuine long-term reliability Diecast aluminium 6063 construction—aerospace-grade durability 6000K colour temperature—natural daylight illumination IP67 waterproof & dustproof—sealed against expedition conditions 10–30V DC operating voltage—universal Defender compatibility Polycarbonate lenses—impact-resistant and optically superior Optimised heatsink design—consistent performance over time Low consumption, high efficiency—reduces electrical load Anti-explosion rated—safe for all-weather use 100% brand new—never refurbished or compromised stock Compatibility Defender Variant Year Range Fit Status Defender 90/110 Series 1983–1991 Direct Fit Defender 90/110 (200 Tdi) 1992–2001 Direct Fit Defender 90/110 (300 Tdi) 2002–2006 Direct Fit Defender 90/110 (Td5) 2007–2014 Direct Fit Defender 90/110 (TDCi) 2015–2016 Direct Fit Defender 90 Heritage 1997–2015 Direct Fit All Defender 90 and 110 variants use the same headlight aperture. Confirm your model year and engine type when ordering brackets—they're sold separately to give you flexibility in sourcing. Installation Notes ⚙️ Installation Overview Difficulty: Moderate | Time: 1–2 hours per side Disconnect the vehicle battery before beginning work. Remove the original headlight unit by unbolting the mounting bracket (typically 3–4 bolts). Unplug the electrical connector from the OEM unit. Slide the new LED unit into the headlight aperture, ensuring the lens sits flush. Bolt the mounting bracket securely—do not overtighten. Connect the electrical harness; ensure pins are fully seated. Reconnect the vehicle battery. Test both headlights on low and high beam before closing the bonnet. ⚠️ Important: These LED units run cooler than halogen originals but produce significantly more brightness. Ensure your electrical system is in good condition before installation. If your Defender has aged wiring, consider a pre-check by a qualified auto-electrician. Ready to Upgrade Your Defender's Lighting? Professional LED headlights aren't a luxury—they're essential kit for anyone serious about their vehicle. Brighter, safer, more reliable, and built to last 50,000+ hours. That's Victorious thinking. Add to Cart Use code 22GET20 for 20% off when you order 2 or more items. ⭐ 4.9/5 · 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover entity. All product names and vehicle references are used for identification purposes only. Land Rover, Defender, and Range Rover are registered trademarks of Jaguar Land Rover Limited. We are not endorsed by, sponsored by, or affiliated with Jaguar Land Rover.

Victorious Automotive · Defender L663 · Exterior Styling LED Hood Bonnet Deflector & Protector for Land Rover Defender L663 (2020–2026) A three-piece bonnet deflector engineered specifically for the Defender L663, combining active LED lighting modes with genuine road debris protection for an elevated exterior presence. Defender L663 2020–2026 Direct Fit Integrated LED 4 LED Modes Bonnet Protection 3-Piece Kit Exterior Accessory Overview The Land Rover Defender L663 occupies a unique position in the modern SUV landscape — it is simultaneously a precision-engineered on-road performer and a genuinely capable off-road tool. Owners who choose to personalise their Defender expect accessories that respect that duality: purposeful in function, considered in design, and built to last beyond the showroom floor. This LED Hood Bonnet Deflector Protector has been developed exclusively for the L663 platform. The three-piece assembly — two flanking side protectors and a central LED-integrated middle section — sits along the leading edge of the bonnet, shielding it from stone chips, road grit, and debris that accumulate at speed. The integrated LED strip elevates the visual identity of the Defender at night, with four selectable lighting effects that respond to vehicle events including startup, indicator activation, and hazard signalling. Rather than a generic universal-fit deflector, this kit uses mounting points tailored to the L663 body line, ensuring a flush, factory-cohesive appearance. The result is an accessory that looks as though it belongs — because it was designed to. What's Included 🔲 Left Side Protector Flanking deflector panel — driver's side 🔲 Right Side Protector Flanking deflector panel — passenger's side 💡 Centre LED Protector Middle section with integrated LED strip and wiring 🔌 LED Wiring & Cables Pre-routed cable set for LED connection 🔩 Mounting Hardware Vehicle-specific fixings and clips included Product Highlights Precision-engineered direct fit for Defender L663 (2020–2026) Integrated LED strip housed within the centre protector piece Four configurable LED modes for dynamic exterior lighting Indicator effect — LED follows turn signal activation Start-up/unlock effect — lights animate on ignition or remote unlock Hazard/double flash effect — syncs with vehicle hazard lights Static ambient mode for constant low-level illumination Protects bonnet leading edge from stone chips and debris Factory-cohesive aesthetic — no visible bolts or exposed brackets Three-piece modular design for precise fitment and easy installation Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Installation Recommended Ensure the vehicle is parked, switched off, and the bonnet is cool before beginning. Clean the bonnet leading edge thoroughly with an isopropyl alcohol wipe to remove wax, oil, or debris from mounting surfaces. Dry-fit all three protector pieces along the bonnet edge to confirm alignment and verify that the mounting points correspond correctly before any adhesive or fasteners are applied. Begin with the two side protector pieces. Align each one to the outer bonnet edge and secure using the supplied mounting hardware, ensuring clips seat fully without flex. Position the centre LED protector section and carefully route the LED wiring through the bonnet gap or firewall conduit to reach the vehicle's fuse/indicator circuit. Do not trap or kink the cable during routing. Connect the LED wiring to the appropriate vehicle circuits following the supplied wiring diagram. Test all four LED modes prior to finalising the cable routing and securing any excess cable with supplied ties. Once all three sections are secured and lighting is confirmed functional, press each piece firmly along its full length to ensure adhesive contact is complete. Allow a minimum of 2 hours before driving. ⚠ Important: Incorrect wiring can affect vehicle electronics or LED warranty. If you are not confident routing and connecting to vehicle circuits, we strongly recommend professional installation by a qualified auto electrician or Land Rover specialist. Retain all original packaging and hardware until installation is confirmed complete and functioning. Built for Defender Owners Who Expect More Every accessory at Victorious Automotive is selected with the same standard you hold your Defender to. Explore the full Defender L663 exterior collection and find everything you need to complete your build. Shop Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of compatibility identification.

Victorious · Toyota Land Cruiser · Exterior LED Light Bar Grille for Toyota Land Cruiser LC300 (2021–2024) Dynamic LED light bar grille with integrated daytime running lamp and adaptive turn signal functionality for LC300. LC300 2021–2024 LED Technology Direct Fit Exterior Styling Safety Lighting Overview The Toyota Land Cruiser LC300 (2021–2024) commands attention wherever it goes. Our LED Light Bar Grille transforms the front fascia with precision-engineered illumination and functional design, giving your LC300 a modern, commanding presence on any terrain. This premium LED grille integrates seamlessly into your LC300's factory design while delivering dynamic lighting sequences that go beyond standard OEM equipment. The light bar features intelligent color-adaptive logic—white on startup, transitioning to bright white driving light, with yellow hazard and directional turn signals that enhance both visibility and safety. Built from high-quality, weather-resistant materials, the LC300 LED Light Bar Grille is engineered for durability in extreme conditions. Whether you're navigating city streets or remote expedition routes, the enhanced daytime and nighttime visibility reduces accident risk while establishing your LC300's dominance on the road. What's Included 💡 LED Light Bar Grille Complete assembly, LC300 fitment 📖 Installation Guide Wiring diagram & step-by-step 🔗 Wiring Harness Pre-assembled connectors 🎥 Video Tutorial Guided installation walkthrough Product Highlights Dynamic white power-on effect, transitions to bright white driving lamp after 2–4 seconds Yellow adaptive turn signals—left, right, and hazard warning sequences Integrated daytime running lamp (DRL) for enhanced visibility and style Premium high-quality materials for extreme durability and long service life LED technology significantly improves nighttime visibility and accident prevention Precision engineering for factory-fit integration into LC300 front grille ACC line control (red wire) for intelligent power management Robust weatherproof construction—tested in harsh terrain conditions No drilling or major modifications required for most installations Backed by 30-day money-back guarantee and Victorious support Compatibility Year Model Engine Compatibility 2021–2022 Land Cruiser LC300 All Direct Fit 2023–2024 Land Cruiser LC300 All Direct Fit 2020 and earlier Land Cruiser LC200 All Not Compatible 2024+ Land Cruiser LC250 All Not Compatible Installation Difficulty: Intermediate | Time: 45–60 Minutes This installation requires basic electrical knowledge and attention to wiring detail. Professional installation is strongly recommended to ensure correct polarity and signal integration. Disconnect battery: Disconnect the negative terminal of your LC300 battery. Wait 5 minutes for systems to discharge. Remove front grille: Carefully remove the OEM grille using appropriate trim tools. Avoid scratching surrounding bodywork. Install LED grille: Position the new LED Light Bar Grille into the opening. Ensure clips engage fully and grille sits flush with body line. Route wiring: Feed the wiring harness through the available channels behind the grille assembly toward the engine bay. Connect power (red): Locate the ACC (Adaptive Cruise Control) line or switched 12V source. Crimp and solder the red wire securely. Use heat shrink tubing to insulate. Connect ground (black): Connect the black wire to a solid ground point on the chassis using a dedicated eyelet and bolt. Ensure clean metal-to-metal contact. Connect turn signals: Identify the left and right turn signal wires in your LC300's loom. Connect yellow line 1 (left) and yellow line 2 (right) using quality butt connectors or solder joints. Test system: Reconnect the battery. Test all lighting functions—power-on effect, daytime lamp, left turn, right turn, and hazard warning. Secure wiring: Use wire clips and conduit to secure all loose wires. Ensure no wires contact moving parts or sharp edges. Reinstall trim: Carefully reinstall any trim panels removed during installation. Check alignment and fitment. ⚠️ Electrical Warning: Incorrect wiring polarity can damage the LED module and your LC300's electrical system. If you are not confident in electrical work, engage a certified automotive technician or contact our support team. Why Choose Victorious We specialise in precision-engineered exterior upgrades for the world's most capable vehicles. Every Victorious product undergoes rigorous quality control and real-world durability testing. Our LC300 LED Light Bar Grille is trusted by enthusiasts across Europe, the Middle East, and beyond. With over 12,300 verified five-star reviews, Victorious stands behind every product with a 30-day money-back guarantee and 24/7 customer support. We ship worldwide via DHL, FedEx, UPS, and TNT. Ready to Elevate Your LC300? Transform your Land Cruiser's front end with precision-engineered LED lighting. Premium materials, intelligent design, worldwide shipping. Shop LC300 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✅ 30-day money-back guarantee 📞 Mon–Fri 9am–7pm: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota, Land Cruiser, or any other OEM manufacturer. All product names, logos, and brands belong to their respective owners. This product is designed as an aftermarket accessory only.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling LED Side Vents for Range Rover Sport L461 (2022–2026) – Illuminated Exterior Upgrade Integrated LED lighting meets OEM-precision fitment — giving your L461 Sport a commanding, after-dark presence that factory spec simply doesn't offer. L461 2022–2026 ABS Construction LED Illuminated Direct Replacement Gloss Black / Carbon Style Wiring Kit Included Weatherproof Overview The Range Rover Sport L461 is one of the most visually assertive SUVs on the road — a vehicle built for owners who expect performance, refinement, and presence in equal measure. But even the most well-specified L461 leaves room for personalisation, and the side vents are one of the most visible opportunities to make the exterior entirely your own. These LED Side Vents are engineered as a direct replacement for the factory units, slotting in with OEM-level precision and no modification to the bodywork. The integrated LED light strips activate automatically with your sidelights or ignition, casting a subtle but unmistakable illuminated glow along the flanks of your Sport. Whether you're pulling into a car park at dusk or sitting at standstill traffic, the effect is immediately noticed — and for all the right reasons. Available in gloss black or carbon-style vent frames, these vents are constructed from high-grade ABS — the same class of material used across premium OEM exterior components. They're built to handle British weather as readily as they handle the school run or the weekend motorway stretch. The included wiring harness makes integration with your existing DRL or sidelight circuit genuinely straightforward, with no permanent or irreversible changes required. What's Included 💡 LED Side Vents (Pair) Left & right units, pre-fitted LED strips 🔌 Wiring Harness Plug-in or hardwire option included 🔩 Fitting Accessories All required fixings and clips 📄 Installation Guide Step-by-step fitting instructions Product Highlights Integrated LED strips deliver a crisp, high-contrast illuminated accent along both flanks LEDs activate automatically with sidelights, DRLs, or ignition live — no manual switching Direct OEM replacement fitment — clips into factory mounting points with no bodywork modification Available in gloss black or carbon-style finish to suit your Sport's spec and colour High-grade ABS construction — impact-resistant, UV-stable, and fully weatherproof Wiring harness included for clean, professional integration with existing circuits Dramatically enhances night-time road presence and daytime visual aggression Reversible installation — factory vents can be refitted if required Compatible with all trim levels across the L461 range including SV and Autobiography Sold as a complete pair — left and right vents supplied together for symmetrical fitment Compatibility Vehicle Model Code Year Range Trim Fitment Range Rover Sport L461 2022–2026 SE Direct Fit Range Rover Sport L461 2022–2026 Dynamic SE Direct Fit Range Rover Sport L461 2022–2026 HSE Direct Fit Range Rover Sport L461 2022–2026 Autobiography Direct Fit Range Rover Sport L461 2022–2026 SV Direct Fit Range Rover Sport L461 2022–2026 Factory Illuminated Vents Not Compatible Range Rover Sport L494 2013–2022 All Trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Panel removal tools, trim clips, basic wiring connectors Using a soft panel removal tool, carefully unclip the factory side vent from the door panel or body aperture, taking care not to mark the surrounding paintwork. Disconnect any existing factory clips or retaining tabs and set the OEM vent aside safely should you wish to refit it in future. Offer up the new LED vent to the aperture and locate the mounting clips into the factory mounting points — do not force; alignment should be natural and flush. Route the LED wiring harness carefully behind the panel towards your chosen power source — sidelight feed, DRL circuit, or ignition live are all suitable options. Connect the harness using the supplied connectors, ensuring polarity is correct before securing any wiring with cable ties or OEM-style clips. Test the LEDs by activating sidelights or ignition before fully pressing the vent into its final seated position. Press the vent home firmly until all clips engage, inspect alignment from the exterior, and road test to confirm all connections are secure. ⚠ Important: Professional installation is recommended if you are unfamiliar with automotive wiring or panel removal. Do not connect LEDs to circuits that exceed their rated voltage. These vents are not suitable for vehicles already fitted with factory-illuminated side vents — check your current spec before ordering. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Define Your Sport. Day or Night. Every L461 on the road deserves to stand apart. These LED Side Vents are one of the cleanest, most impactful exterior upgrades available for the Range Rover Sport — visible from distance, fitted in an afternoon, and built to last the life of your ownership. Shop All L461 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are used for fitment identification purposes only and remain the intellectual property of their respective owners. Product imagery is for illustration purposes — actual finish may vary slightly between production batches.

Victorious Automotive · Mercedes G-Class · Lighting LED Tuning Lights for Mercedes G-Class (1990–2018) Brabus-inspired LED headlights with enhanced visibility and premium styling for your G500, G55, G63, and G65. G-Class 1990–2018 ABS+PU Material Brabus Style Dual Finish Options Overview The Mercedes-Benz G-Class stands as one of the most iconic luxury SUVs ever built. From the original G500 through to the modern G63, its commanding presence on road and trail has remained unmatched. These LED Tuning Lights honour that legacy whilst elevating your G-Class into contemporary territory with Brabus-inspired design language and cutting-edge illumination technology. This headlight assembly transforms your G-Class's front end with a sleek LED profile, available in gloss black or carbon fibre ABS finishes. The 26cm diameter ensures perfect fitment across all compatible models, while the ABS+PU construction delivers durability without compromise on aesthetics. Enhanced beam pattern means improved visibility in low-light conditions—safety and style working in perfect harmony. Whether you're restoring a classic W460 or upgrading a later W463, these lights deliver the premium finish that distinguishes a properly curated G-Class from the standard factory specification. Professional installation unlocks their full potential. What's Included 💡 LED Headlight Pair Brabus-style design, 26cm diameter 🔌 Wiring & Connectors Complete loom with OEM-style plugs 📋 Installation Guide Step-by-step fitting instructions ✓ Quality Assurance CCC certified, 30-day guarantee Product Highlights Enhanced LED beam pattern for improved visibility and safety Brabus-inspired modern aesthetic with premium presence Dual finish options: gloss black or carbon fibre ABS 26cm diameter ensures perfect G-Class fitment Lightweight yet durable ABS+PU construction CCC certified for international compliance OEM-style wiring and connectors included Compatible with G500, G55, G63, and G65 models Professional installation recommended for best results Part of Victorious' expanding Mercedes accessory range Compatibility Model Year Range Fitment G500 1990–2018 Direct Fit G55 AMG 2003–2018 Direct Fit G63 AMG 2012–2018 Direct Fit G65 AMG 2012–2015 Direct Fit G-Class (Post-2018) 2019–Present Not Compatible Installation Notes Difficulty Level: Intermediate | Time: 2–3 hours Disconnect the vehicle battery for safety Remove factory headlight assemblies (fasteners vary by year) Disconnect original wiring harnesses Connect new LED harnesses to vehicle loom using OEM-style connectors Install new LED headlights into mounting brackets Secure all fasteners and test illumination before reassembly Reconnect battery and verify operation on both low and high beam Allow 24 hours for silicone adhesive to fully cure Important: Professional installation is strongly recommended. Improper fitment or wiring may result in poor visibility, electrical faults, or damage to your G-Class. Contact a Mercedes specialist if you're unsure. Elevate Your G-Class Transform your Mercedes G-Class with Brabus-inspired LED tuning lights. Enhanced safety, timeless style, and the premium finish your icon deserves. View Our G-Class Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Disclaimer: Victorious Automotive is not affiliated with Mercedes-Benz AG, Daimler Group, or any official Mercedes subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is a third-party aftermarket accessory designed for fitment to the vehicles listed. Always verify compatibility before purchase and consult official documentation or a qualified technician.

Victorious Automotive · Toyota LC250 · Interior Trim Air Conditioning Vent Decoration Covers – Left & Right Set for 2024 Toyota Land Cruiser 250 / Prado LC250 1958 Precision-fitted ABS vent trim covers that instantly elevate the dashboard aesthetic of your 2024 Land Cruiser 250 — available in Carbon Fiber Pattern and Silver finishes. LC250 2024 Prado 1958 ABS Material Carbon Fiber Pattern Silver Finish No-Drill Install Left & Right Set Interior Trim Overview The 2024 Toyota Land Cruiser 250 — sold in key markets as the Prado LC250 1958 — represents a landmark return to the Land Cruiser's heritage-meets-modern philosophy. Its interior is clean and purposeful, but for owners who demand more from their cabin environment, the factory air conditioning vent surrounds leave room for a more refined, characterful finish. These Left and Right Air Conditioning Vent Decoration Covers are engineered specifically for the LC250's dashboard architecture. Available in a striking Carbon Fiber Pattern or a clean brushed-effect Silver, each cover sits flush against the OEM vent housing, adding a layer of visual depth and tactile quality that complements the vehicle's premium positioning. The high-grade ABS construction ensures long-term resistance to UV exposure, heat cycling, and everyday contact. Installation requires no drilling, cutting, or specialist tools. The adhesive-backed fitment system bonds cleanly to the vent surround surface in minutes — making this one of the most accessible yet visually impactful interior upgrades available for the LC250 platform. Full vent functionality is preserved throughout. What's Included 🔲 Left Vent Cover Driver-side AC vent decoration trim 🔲 Right Vent Cover Passenger-side AC vent decoration trim 🔧 Adhesive Backing Pre-applied 3M-style mounting tape 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Designed exclusively for the 2024 Toyota Land Cruiser 250 / Prado LC250 1958 Available in Carbon Fiber Pattern and Silver for personalised styling High-grade ABS construction for lasting durability and heat resistance No-drill, no-cut paste installation — complete in under 15 minutes Full air vent functionality retained — zero compromise on airflow Precision-cut edges for a seamless, factory-integrated appearance Resistant to UV fading, cabin heat cycles, and daily wear Lightweight trim adds no measurable weight to the interior assembly Covers both left (driver) and right (passenger) vent positions Pairs beautifully with other LC250 interior trim upgrades Compatibility Vehicle Year Trim / Variant Fitment Toyota Land Cruiser 250 (LC250) 2024 All Trims Direct Fit Toyota Prado 1958 (LC250 Platform) 2024 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Trims Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Trims Not Compatible Toyota Prado 150 Series 2009–2023 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🔩 Tools Required: None Ensure your vehicle interior is at room temperature. Avoid installation in direct sunlight or extreme cold, as this can affect adhesive performance. Thoroughly clean both the left and right AC vent surrounds using an isopropyl alcohol wipe or clean microfibre cloth. Remove any dust, oils, or residue. Allow to dry completely. Dry-fit each cover against its corresponding vent surround to confirm positioning and alignment before committing to adhesion. Peel the protective backing from the adhesive layer on the rear of the first cover. Align carefully and press firmly into position, applying even pressure across the entire surface for 30–60 seconds. Repeat the process for the second cover on the opposite side. Allow the adhesive to cure for a minimum of 24 hours before subjecting the trim to any stress, cleaning, or direct airflow from the vents. ⚠ Important: Do not attempt installation on a dusty, damp, or greasy surface — this will significantly reduce adhesive bond strength. Ensure the vent louvres remain unobstructed after fitting. If the cover does not align correctly, do not force it; contact our support team at +44 203 943 9919 (Mon–Fri, 9am–7pm) for guidance. Finish Your LC250 Interior the Right Way These vent covers are a small change that makes a noticeable difference — the kind of detail that separates a well-appointed cabin from a truly considered one. Trusted by over 12,300 verified customers worldwide, Victorious Automotive ships globally via DHL, FedEx, UPS, and TNT. Shop All LC250 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Installation is at the vehicle owner's discretion. Victorious Automotive accepts no liability for damage resulting from incorrect installation or use outside of the supplied guidelines.

Product Description: Enhance your Land Rover Defender 110 (2020) with custom-fit, all-weather rubber floor mats. Designed for both aesthetics and protection, these mats ensure your vehicle remains stylish and clean in all conditions. Product Highlights: Perfect fit for Land Rover Defender 110 (2020) Durable, high-quality rubber material All-weather protection against mud, snow, and debris Easy to clean and maintain Non-slip surface for added safety Odorless and environmentally friendly Product Specifications: Material: Upper Surface (Rubber TPE), Middle Layer (XPE), Bottom Layer (Polyester) Color: Black Filling Material: Synthetic Fiber Item Weight: 8 kg Package Includes: Complete set of custom-fit floor mats for Land Rover Defender 110 Notes: Ensure compatibility with your specific vehicle model before purchase.

Victorious Automotive · Defender L663 · Interior Trim Left-Hand Drive ABS Black Interior Window Lifter Switch Trim for 2020 Land Rover Defender 110 A precision-formed ABS black switch surround that refines the door panel aesthetic of the 2020 Defender 110 — clean lines, factory-level fitment, zero compromise. Defender L663 2020 Model Year Left-Hand Drive ABS Black Window Lifter Switch Trim Interior Trim No-Drill Install ISO9001 Certified Overview The 2020 Land Rover Defender L663 was a complete reimagining of one of the most iconic vehicles ever made — bold, capable, and designed with an interior that finally matched its exterior ambition. Yet for owners who want every detail to feel intentional, the door panel window lifter switch area is one of those subtle surfaces that benefits enormously from a well-fitted trim overlay. It's a small change that shifts the feel of the entire door card. This ABS Black Window Lifter Switch Trim is engineered specifically for the Left-Hand Drive Defender 110 (2020 onwards), offering a snug, factory-matched surround for the window control switch cluster. Formed from high-grade ABS material and finished in a clean gloss black, it integrates seamlessly with the Defender's existing interior language — adding definition without distraction. At 29cm long and weighing just 148g, the trim is lightweight yet rigid, built to resist flex, temperature variation, and daily door use without lifting or fading. Installation requires no tools, no drilling, and no professional fitting — automotive-grade adhesive tape is pre-applied, meaning this is a genuine weekend upgrade that takes minutes and lasts years. Whether you're building out a full interior refresh or simply want a more considered finish on your Defender's door panels, this trim is exactly the kind of detail-oriented accessory that separates a standard Defender from a truly personal one. What's Included 🪟 Window Lifter Switch Trim 1× full set — LHD Defender 110 fitment 🔧 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant backing 📄 Fitting Guide Step-by-step installation instructions included 📦 Protective Packaging Secure box — arrives scratch-free, ready to fit Product Highlights Precision-engineered for Left-Hand Drive Defender 110 (2020) — exact fitment, no gaps Premium ABS construction — rigid, lightweight, and resistant to daily wear Gloss black finish — complements both dark and light Defender interior colour packs ISO9001 certified manufacturing — consistent quality control at every stage No-drill, no-cut installation — adhesive-backed for a clean, reversible fit Dimensions: 29cm × 12cm × 4cm — purpose-sized for the LHD switch panel Weighs just 148g — no added bulk or door panel stress Heat and UV stable — maintains finish in all climates Compatible with Defender 110 standard and specification variants (LHD, 2020) Pairs with other Victorious Defender L663 interior trim pieces for a cohesive upgrade Compatibility Vehicle Year Drive Body Style Fit Land Rover Defender 110 (L663) 2020 Left-Hand Drive 110 (5-door) Direct Fit Land Rover Defender 130 (L663) 2020 Left-Hand Drive 130 (Extended) Direct Fit Land Rover Defender 90 (L663) 2020 Left-Hand Drive 90 (3-door) Verify Before Purchase Land Rover Defender 110 (L663) 2020 Right-Hand Drive 110 (5-door) Not Compatible Land Rover Defender (Pre-2020 / Classic) Pre-2020 Any Any Not Compatible Range Rover Sport / Vogue / Velar Any Any Any Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked and the door panel at room temperature. Avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Thoroughly clean the window lifter switch surround area using an isopropyl alcohol wipe or panel prep solution. Remove all dust, grease, and residue. Allow to dry completely — this step is critical for long-term adhesion. Dry-fit the trim piece against the switch panel to confirm alignment and coverage before committing. Note the natural orientation and any reference points on the door card. Peel back the protective film from the pre-applied adhesive tape on the reverse of the trim. Do not touch the adhesive surface. Carefully align the trim piece to the switch surround, starting from one edge and pressing firmly across the full surface. Apply sustained hand pressure for 30–60 seconds to activate the adhesive bond. Allow 24 hours for the adhesive to fully cure before operating windows repeatedly or subjecting the trim to heavy contact. ⚠ Important: This trim is designed for Left-Hand Drive Defender 110 models only. Attempting to fit on a Right-Hand Drive vehicle will result in incorrect alignment. If you're unsure of your vehicle's specification, check your VIN or contact us at +44 203 943 9919 before ordering. Complete Your Defender Interior This window lifter switch trim is just the beginning. Explore the full Victorious range of Defender L663 interior upgrades — from dashboard overlays to gear surround trims — and build an interior that feels entirely your own. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styled accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for the purpose of fitment compatibility.

Victorious Automotive · Defender L663 · Interior Trim Oak Wood Grain ABS Window Lifter Switch Trim – Left-Hand Drive Defender 110 (2020+) A precision-fitted interior trim panel that brings warm, natural oak wood grain texture to the door switch surround of your 2020+ Land Rover Defender 110 or 130 — no drilling, no modification, just a refined finish. Defender L663 2020–2026 Left-Hand Drive Oak Wood Grain ABS Material Window Lifter Trim ISO9001 Certified Adhesive Fit Model: XYL1596 Overview The 2020 Land Rover Defender L663 was engineered as a capable, forward-thinking reinterpretation of an icon — and its interior reflects that ambition. The cabin is clean, purposeful, and increasingly being personalised by owners who want to move beyond the factory-standard black plastics and inject a sense of warmth and character into their daily environment. This Oak Wood Grain Window Lifter Switch Trim is designed specifically for the door panel of the Defender 110 and 130. Manufactured in durable ABS with a convincing oak wood grain surface finish, the trim wraps the inner window lifter switch area with a material that reads as premium without being ostentatious — a natural complement to the Defender's earthy, adventure-ready aesthetic. Installation requires no specialist tools and no permanent modification to your vehicle. A pre-applied automotive-grade adhesive backing bonds the trim cleanly to the factory surface, making it a reversible, weekend-friendly upgrade that delivers a visually significant result. If you're building out a fully personalised Defender interior, this piece ties in seamlessly with other wood grain or dark accent trim options across the cabin. What's Included 🪵 Window Lifter Switch Trim 1 × Oak wood grain ABS trim panel — LHD fitment 🔧 Pre-Applied Adhesive Automotive-grade 3M-style tape pre-installed on reverse 📦 Protective Packaging Individual protective wrap to prevent transit damage Product Highlights Precision-cut to match the Defender 110 / 130 door panel profile exactly Oak wood grain ABS finish — warm, natural tone with consistent grain texture Manufactured to ISO9001 quality standards for consistent production quality Durable ABS construction resists warping, cracking, and UV discolouration Pre-applied automotive adhesive tape — no drilling or permanent fixing required Left-hand drive specific — correct switch layout alignment for LHD vehicles Lightweight at 148g — no added bulk or rattle risk to the door panel Compatible with both Defender 110 and Defender 130 body variants Clean, reversible installation — removable without damage to OEM panels Pairs naturally with other oak wood grain interior trim pieces across the cabin Compatibility Vehicle Year Range Drive Body Fitment Land Rover Defender L663 2020–2026 Left-Hand Drive 110 Direct Fit Land Rover Defender L663 2020–2026 Left-Hand Drive 130 Direct Fit Land Rover Defender L663 2020–2026 Right-Hand Drive 110 / 130 Not Compatible Land Rover Defender L663 2020–2026 Left-Hand Drive 90 Not Compatible Land Rover Defender (Pre-2020) Pre-2020 All All Not Compatible Range Rover / Discovery / Other All All All Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle parked, interior lighting on. Ensure the door panel and window switch surround area are at room temperature — cold surfaces reduce adhesive performance. Thoroughly clean the target surface using an isopropyl alcohol wipe or similar degreasing agent. Remove any dust, oil, or residue. Allow to dry completely before proceeding. Dry-fit the trim panel over the window lifter switch surround to confirm alignment and check that all edges sit flush against the factory panel before committing. Peel back the adhesive liner from the reverse of the trim, starting from one corner. Take care not to touch the adhesive surface with bare fingers. Position the trim carefully from one end, pressing down firmly as you work across the full length. Apply sustained pressure for 30–60 seconds across the entire surface to fully activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before operating the window switches vigorously or exposing the trim to moisture or temperature extremes. ⚠ Important: This trim is designed for Left-Hand Drive vehicles only. Installing on a Right-Hand Drive Defender will result in misaligned switch cutouts. If you are unsure of your vehicle's drive configuration, check the position of the steering wheel — LHD vehicles have the steering wheel on the left side of the cabin. Upgrade Your Defender Interior Browse our full collection of Defender L663 interior trim accessories — from dashboard surrounds to gear selector frames — all engineered for the 2020–2026 platform. Shop Defender L663 Interior → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover and Jaguar Land Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Defender 90/110 · Exterior Lighting License Plate Light – 3W LED Replacement Bulbs for Land Rover Defender 90/110 (1990–2016) Pure white LED rear lamp upgrade. Modern brightness, factory fitment, zero modifications. Defender 90 Defender 110 1990–2016 LED 3W White 6000K Direct Fit Overview Your Land Rover Defender 90 and 110 deserve lighting that matches the excellence of the rest of your vehicle. Factory halogen license plate bulbs dim, yellow with age, and consume unnecessary power. This 3W LED replacement delivers crisp, white light (6000K) while cutting power draw—and it installs in seconds with no modifications. Whether you're at a British car meet or navigating night roads, proper lighting visibility matters. These premium YAM LEDs meet DOT/ECE standards and won't interfere with your vehicle's electrics. They're the kind of detail that separates a well-maintained Defender from the rest. One pair handles both rear license plate positions. Drop-in fitment means no wiring, no fabrication, no regret. What's Included 💡 LED Bulb Pair Two 3W white LED units, ready to fit 📋 Fitment Guide Quick reference for 90/110 variants ✓ 30-Day Guarantee Full refund if not satisfied 🌍 Worldwide Shipping DHL, FedEx, UPS, TNT options Product Highlights 3W pure white LED (6000K colour temperature) Drop-in replacement—no soldering or modifications Lower power draw than original halogen DOT and ECE approved for road use Compatible with Defender 90 & 110 (1990–2016) Pair covers both rear license plate positions Instant brightness, zero warm-up time Long service life compared to halogen No dash warning lights or error codes Premium YAM-brand quality & reliability Compatibility Model Year Range Fitment Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2016 Direct Fit Defender 2020+ (L663) 2020–2026 Not Compatible Installation Notes Difficulty Level: Beginner | Time Required: 5 Minutes Open your Defender's rear hatch or tailgate. Locate the license plate light housing (typically two units, top corners of the plate area). Gently twist the existing halogen bulb counterclockwise to release from its socket. Insert the new LED bulb and twist clockwise until snug. Do not over-tighten. Repeat for the second unit (both lights should now be bright white). Test with headlights on and engine running to confirm proper function. Note: If you see error codes on your dashboard after installation, your Defender's system may require a CAN-bus compatible LED or a load resistor. Contact us for a compatibility solution specific to your vehicle's year and spec. Ready to Brighten Your Defender? Clean, white lighting is a small detail that transforms your Defender's appearance and function. Get these premium LED bulbs fitted in minutes. Part of a larger Defender lighting collection—explore more upgrades for your 90, 110, or 130. Shop Defender Exterior Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ reviews 📞 +44 203 943 9919 — Mon–Fri 9am–7pm ✓ 30-day money-back guarantee 🌍 Worldwide DHL, FedEx, UPS, TNT shipping Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed to fit the listed vehicles; compatibility varies by year and specification. Always consult your vehicle's handbook or contact us before installation.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Limiter Protective Cover for 2024 Toyota Land Cruiser 250 — ABS Interior Guard A precision-fit ABS protective cover designed to shield the door limiter mechanism on the 2024 Land Cruiser 250 from rust, wear, and daily exposure — while elevating the interior finish. LC250 2024 ABS Material Rust Protection Paste Installation Black Interior Trim Door Limiter Overview The 2024 Toyota Land Cruiser 250 represents a bold return to serious off-road capability wrapped in a thoroughly modern interior. Owners who invest in this platform understand the importance of protecting every component — from the powertrain down to the finer details of the cabin. The door limiter is one of those components that goes largely unnoticed until corrosion or surface degradation starts to creep in, particularly after regular use in wet, muddy, or coastal environments. This Limiter Protective Cover has been developed specifically for the LC250 to address exactly that vulnerability. Crafted from high-quality ABS, it wraps cleanly over the existing door limiter housing, forming a protective barrier against rust, moisture ingress, and surface abrasion. It's the kind of upgrade that doesn't shout for attention, but the kind you'll appreciate every time you open a door and find the mechanism looking as sharp as the day you took delivery. Installation requires no specialist tools or technical knowledge. The cover attaches via a secure adhesive paste method, meaning you can have it fitted and forgotten in under a minute — no drilling, no modifications, no residue. For LC250 owners who hold their vehicles to a high standard inside and out, this is a simple, cost-effective way to stay ahead of preventable wear. What's Included 🛡️ Limiter Protective Cover × 1 ABS moulded cover in gloss black finish 🔧 Adhesive Paste Strip Pre-applied or included for hassle-free fitment 📋 Installation Guide Step-by-step instructions for quick fitting Product Highlights Precision-engineered for the 2024 Toyota Land Cruiser 250 door limiter High-grade ABS construction — impact-resistant and long-lasting Provides a robust barrier against rust and surface corrosion Gloss black finish complements the LC250's interior trim palette Adhesive paste installation — no drilling or permanent modifications Flush fit design ensures no rattles, gaps, or movement after fitting Resistant to moisture, humidity, and temperature fluctuation Lightweight construction adds protection without bulk Maintains full door limiter functionality once installed A subtle upgrade that protects resale value and interior condition Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser 250 (LC250) 2024 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Variants Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Variants Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Variants Not Compatible Installation Notes Difficulty: ⭐ Easy  |  Estimated Time: 5–10 Minutes  |  Tools Required: None Open the relevant door fully to expose the door limiter mechanism and housing area. Clean the surface of the limiter housing thoroughly using a dry microfibre cloth to remove any dust, moisture, or grease. Allow to dry completely before proceeding. Peel the backing from the adhesive paste strip on the reverse of the protective cover. Carefully align the cover over the limiter housing, ensuring all edges seat flush before applying pressure. Press firmly across the entire surface for 15–20 seconds to ensure a secure bond. Allow the adhesive to fully cure for 30 minutes before operating the door repeatedly. ⚠ Important: Ensure the limiter housing surface is completely dry and free of any cleaning products or silicone treatments before application. Installing onto a damp or contaminated surface may compromise adhesive performance. Confirm your vehicle is the 2024 Land Cruiser 250 before purchase — this cover is not cross-compatible with earlier or later LC series models. Complete Your LC250 Interior Explore the full range of Toyota Land Cruiser LC250 interior and exterior accessories at Victorious Automotive — trusted by over 12,300 owners worldwide. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle model names and codes are referenced solely for fitment compatibility purposes. Please verify your vehicle specification before ordering.

Victorious Automotive · Defender L663 · Exterior Lighting Lower Grille Yellow LED Light Bar – Land Rover Defender L663 (2020+) Twelve high-output amber lenses in a weather-sealed aluminium housing — purpose-built to integrate into the lower grille of the L663 Defender and deliver genuine off-road illumination where it counts. Defender L663 2020–2024+ Yellow / Amber LED IP67 Waterproof Aluminium Housing Lower Grille Fit Wiring Harness Included 90 · 110 · 130 Overview The L663 Defender was engineered with intent — a vehicle built equally for expedition use and everyday practicality. Whether you're running the 90, 110, or 130, the lower front end of the Defender offers prime real estate for auxiliary lighting: recessed, purposeful, and completely uncompromised in terms of forward visibility. This LED light bar slots directly into that space, transforming the lower grille section into a functional lighting zone that matches the Defender's overland-ready character. This Yellow LED Light Bar is built around 12 high-output amber lenses, each chosen specifically for their penetration in fog, dust, rain, and low-visibility trail conditions. The amber wavelength scatters less than pure white light in adverse weather, making it the preferred choice for serious off-roaders and expedition drivers. The housing is cast aluminium — not plastic, not composite — and carries an IP67 waterproof rating, meaning full submersion up to one metre poses no risk to the unit. Unlike generic aftermarket bars that require fabrication or compromise your grille's OEM appearance, this light bar is designed with the L663 lower grille cavity in mind. The included wiring harness allows connection to your ignition circuit, DRL loop, or a dedicated interior switch, giving you full control over when and how the lights operate. It's a fitment that looks like it belongs — because it was designed to. What's Included 💡 12-Lens Yellow LED Light Bar High-output amber array in aluminium housing 🔌 Wiring Harness Pre-terminated leads, relay, and fuse included 🔘 Interior Switch Dash-mountable toggle for cabin control 🔩 Mounting Hardware Stainless fixings for secure grille integration Product Highlights 12 high-output yellow/amber LED lenses for maximum forward illumination in adverse conditions IP67 waterproof rated — sealed against full dust ingress and temporary submersion Cast aluminium housing — rust-proof, impact-resistant, and thermally efficient Amber wavelength optimised for fog, rain, dust, and low-visibility off-road use Defender L663-specific fitment — designed for the lower grille cavity across 90, 110, and 130 Complete wiring harness included — relay, fuse, and pre-terminated connectors Dash-mountable interior switch for independent on/off control Compatible with ignition loop, DRL circuit, or standalone switch configuration Fits all trim levels — S, SE, X-Dynamic, X, V8, and First Edition Low-profile multi-beam design integrates cleanly with or behind OEM lower grille mesh Compatibility Vehicle Code Body Years Trim Fit Land Rover Defender L663 90 2020–2024+ S, SE, X-Dynamic, X, V8 Direct Fit Land Rover Defender L663 110 2020–2024+ S, SE, X-Dynamic, X, V8 Direct Fit Land Rover Defender L663 130 2022–2024+ SE, X-Dynamic, X Direct Fit Land Rover Defender L316 90 / 110 Pre-2016 All Not Compatible Range Rover Sport L461 — 2022+ All Not Compatible Range Rover Vogue L460 — 2022+ All Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5–3 Hours  ·  Tools Required: Yes Remove the lower front bumper trim panel to access the grille cavity. Retain all OEM clips and fixings for reassembly. Identify the lower grille mounting points or mesh cutout zone where the light bar will sit. Test-fit the bar before committing to any brackets. Secure the light bar using the supplied stainless hardware. If your grille variant requires additional support, fabricate or source Defender-specific bracket extensions as needed. Route the wiring harness up through the bumper cavity and through the firewall, keeping clear of heat sources and moving components. Use existing grommets where possible. Connect to your chosen power source — ignition feed, DRL circuit, or a fused direct line — following the relay wiring diagram included with the harness. Mount the interior switch in a suitable dash location. Test all connections before finalising cable management with OEM-grade loom tape or conduit. Refit all trim panels, confirm all clips are seated, and perform a full function test in a controlled environment before any trail or road use. ⚠ Important: Depending on your specific grille variant or trim configuration, minor bracket modification or custom fabrication may be required. Professional installation is strongly recommended to ensure correct waterproofing of all connectors and proper integration with your Defender's electrical system. Incorrect wiring can affect vehicle electronics — always use a fused circuit. Built for the Terrain. Finished for the Build. The Defender doesn't do half measures — and neither should its lighting. Whether you're heading into the dark on a remote trail or simply want your L663 to carry the kind of prepared, purposeful look that matches what it's capable of, this yellow LED lower grille bar is a natural addition. Available exclusively from Victorious Automotive. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Discovery 3 / Discovery 4 / Range Rover Sport · Transmission Service Auto Transmission Oil Pan with Filter & Gasket — LR007474 / 24117571227 | 6-Speed ZF for Discovery 3, Discovery 4, Range Rover Sport, Range Rover, BMW & Jaguar A complete, direct-fit transmission sump kit engineered for the ZF 6HP26 and 6HP28 automatic gearbox — restoring proper fluid containment, filtration, and sealing in a single service kit. LR007474 24117571227 Discovery 3 2005–2009 Discovery 4 2009–2016 Range Rover Sport L320 2005–2013 Range Rover L322 2002–2012 6-Speed ZF Includes Filter & Gasket 1.54 kg PP Construction Overview The ZF 6HP26 and 6HP28 six-speed automatic transmission is the proven heart of some of Land Rover's most capable platforms — the Discovery 3, Discovery 4, Range Rover L322, and Range Rover Sport L320. These gearboxes are renowned for their smooth shift programming and capability under load, but their longevity is entirely dependent on clean, uncontaminated transmission fluid and a sump that seals correctly. Over time, the original plastic sump pan can develop micro-cracks, the internal filter becomes clogged with metallic wear debris, and the gasket hardens and weeps — leading to slipping shifts, transmission overheating, and in the worst cases, premature gearbox failure. This complete transmission oil pan kit — carrying OEM-equivalent part numbers LR007474 and 24117571227 — replaces the entire sump assembly in one service interval. Machined and moulded to match the original ZF specification, the pan provides a true flat mating surface, while the included filter and formed gasket ensure a leak-free, contamination-free seal from the moment of installation. Everything required for a full transmission sump service is bundled into a single kit, saving workshop time and eliminating the risk of sourcing mismatched components separately. This kit is also fully compatible with select BMW and Jaguar models that share the same ZF 6HP transmission family — including the BMW 550i, 750i, and Jaguar XF, XJ, and XK ranges — making it one of the most versatile transmission service solutions across the European performance vehicle segment. What's Included 🛢️ Transmission Oil Pan PP construction, OEM-profile sump pan — LR007474 / 24117571227 🔩 Internal Transmission Filter Captures wear particles and contaminants from the fluid circuit 🔵 Formed Pan Gasket Precision-cut sealing gasket for a leak-free transmission mating surface 📋 Complete Service Kit All three components supplied together — no additional parts required Product Highlights Direct OEM-spec replacement for ZF 6HP26 / 6HP28 gearbox sump Manufacturer part number LR007474 — cross-references 24117571227 Includes internal transmission filter — complete one-stop service Formed gasket included — ensures a clean, dry seal every time PP (polypropylene) construction — lightweight yet chemically resistant Interchange numbers: 24117519359, 24117522923, 24110403404 Other part references: C2C38963, C2C6715 — confirmed cross-compatible Compatible across Land Rover, Range Rover, BMW and Jaguar platforms Weighs just 1.54 kg — manageable for a solo workshop service Restores proper fluid level retention and thermal regulation in the gearbox Vehicle Compatibility Vehicle Year Range Transmission Fitment Land Rover Discovery 3 (LR3) 2005–2009 ZF 6HP 6-Speed Auto Direct Fit Land Rover Discovery 4 (LR4) 2009–2016 ZF 6HP 6-Speed Auto Direct Fit Range Rover Vogue L322 2002–2009 ZF 6HP 6-Speed Auto Direct Fit Range Rover Vogue L322 2010–2012 ZF 6HP 6-Speed Auto Direct Fit Range Rover Sport L320 2005–2009 ZF 6HP 6-Speed Auto Direct Fit Range Rover Sport L320 2010–2013 ZF 6HP 6-Speed Auto Direct Fit BMW 550i / 550i GT / 750i / 750i xDrive Various ZF 6HP 6-Speed Auto Direct Fit Jaguar XF / XFR / XJ / XK / XKR / XKR-S Various ZF 6HP 6-Speed Auto Direct Fit Range Rover Sport L494 (2013–2020) 2013–2020 ZF 8HP (different unit) Not Compatible Range Rover Vogue L405 (2013–2020) 2013–2020 ZF 8HP (different unit) Not Compatible Defender L663 (2020–present) 2020–2026 ZF 8HP (different unit) Not Compatible Installation Notes ⚙️ Difficulty: Intermediate  |  Estimated Time: 1.5–2.5 hours  |  Lift Required: Yes Raise the vehicle safely on a 4-post lift or axle stands and place a suitable drain tray beneath the transmission sump area. Loosen the sump pan bolts progressively to allow residual ATF to drain from one corner before fully removing the pan. Drain and dispose of old fluid responsibly. Remove the old transmission filter — it typically pulls or unclips downward from the valve body. Note the orientation before removal. Clean the transmission valve body mating face thoroughly using a lint-free cloth. Remove all traces of old gasket material — do not use abrasive tools on the valve body face. Install the new internal filter, ensuring it seats fully and locks into position. A shallow push or click confirms correct fitment. Position the new gasket onto the pan flange, then offer the pan up to the transmission casing. Hand-thread all bolts before torquing in a cross pattern to the ZF specified torque (typically 8–10 Nm — confirm in your workshop manual). Refill the transmission with the correct ZF Lifeguard fluid to the manufacturer-specified level via the fill plug. On these platforms, fluid level is typically set at operating temperature — use a diagnostic tool to monitor gearbox temperature during the fill procedure. Start the engine and cycle through all gear positions (P–R–N–D) with the vehicle stationary. Check beneath the vehicle for any signs of seeping at the pan joint before returning to service. ⚠ Important: Always use the correct ZF-approved ATF fluid (ZF Lifeguard 6 for 6HP transmissions). Using the wrong fluid type will damage seals and void any warranty. If the gearbox was slipping or exhibiting fault codes prior to this service, carry out a full diagnostic check before assuming this service will resolve the underlying issue — a sump service addresses maintenance and fluid condition, not mechanical wear faults. Shop by Your Vehicle Browse our full range of genuine and OEM-equivalent parts curated specifically for your Land Rover or Range Rover platform: 🚙 Discovery 3 (LR3) 2005–2009 accessories & parts 🚙 Discovery 4 (LR4) 2009–2016 accessories & parts 🚙 Range Rover Sport L320 2005–2013 accessories & parts 🚙 Range Rover Vogue L405 2013–2020 accessories & parts Keep Your Transmission in Peak Condition Transmission health is one of the most overlooked aspects of Land Rover ownership — yet one of the most critical. This complete sump kit is everything you need to service the ZF 6HP unit properly, in one box, at a price that makes a professional-quality service entirely achievable at home or in your independent workshop. Shop Discovery 3 Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, BMW AG, Jaguar Cars Limited, or ZF Friedrichshafen AG. Land Rover®, Range Rover®, Discovery®, Defender®, Jaguar®, and BMW® are registered trademarks of their respective owners. All part numbers, vehicle references, and compatibility information are provided for fitment identification purposes only. Always verify compatibility against your specific vehicle VIN and workshop manual before installation. If in doubt, consult a qualified transmission specialist.

Victorious Automotive · Discovery 3 / Discovery 4 / Range Rover Sport · Spare Tyre System Spare Tyre Winch – LR024145 | Discovery 3, Discovery 4 & Range Rover Sport (Standard Version) OEM-specification steel spare wheel winch for Land Rover Discovery 3, Discovery 4, and Range Rover Sport L320 — the reliable, direct-fit solution to lower and raise your spare tyre under the load floor without tools or complexity. LR024145 LR010453 KTI000017 Discovery 3 · 2005–2009 Discovery 4 · 2010–2016 Range Rover Sport L320 · 2005–2013 Metal Construction Standard (No Anti-Theft) Direct OE Fit Black Finish Overview The Land Rover Discovery 3, Discovery 4, and first-generation Range Rover Sport L320 all carry their spare tyre mounted beneath the rear load floor via a cable winch mechanism — a practical system that keeps the spare fully concealed and out of the way until it's needed. Over time, this winch assembly is subject to significant wear from weather exposure, corrosion, and regular use, and a failed or seized winch can leave you stranded on the side of the road unable to retrieve your spare at the worst possible moment. This LR024145 spare tyre winch is the standard OE-specification replacement for all three platforms, manufactured to the same dimensions and material tolerances as the original Land Rover unit. The assembly utilises a robust steel construction finished in black, operating via the vehicle's existing cable and drop-rod mechanism to smoothly lower and raise the spare wheel carrier. This is the non-anti-theft variant — the earlier, simpler version designed for vehicles that did not leave the factory with the locking winch upgrade. Whether you're rebuilding a high-mileage Discovery 3 or refreshing the underbody of a Range Rover Sport before a longer expedition, replacing an ageing winch mechanism is a straightforward job that restores peace of mind and ensures your spare is always accessible when you need it most. Cross-references LR010453 and KTI000017 for easy identification across supplier catalogues. What's Included 🔩 Spare Tyre Winch Assembly Complete OE-spec unit, ready to fit 🪝 Winch Cable & Hook Mechanism Pre-assembled steel cable retaining system 🧱 Mounting Bracket Direct bolt-on fitment to OE mounting points 📄 Product Reference Sheet Part numbers and fitment reference included Product Highlights OEM part number LR024145 — direct Land Rover fitment reference Also cross-references LR010453 and KTI000017 Full metal construction for durability and load-bearing integrity Black finish to resist corrosion in underbody conditions Standard (non-anti-theft) version — matches early factory specification Direct bolt-on replacement — no modification required Compatible with Discovery 3, Discovery 4 and Range Rover Sport L320 Operates with existing drop-rod and cable retrieval system Restores full spare tyre lowering and raising functionality Competitively priced alternative to main dealer pricing Compatibility Vehicle Code Years Fitment Land Rover Discovery 3 L319 2005–2009 Direct Fit Land Rover Discovery 4 L319 2010–2016 Direct Fit Range Rover Sport (1st Gen) L320 2005–2009 Direct Fit Range Rover Sport (1st Gen) L320 2010–2013 Direct Fit Range Rover Sport (2nd Gen) L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Land Rover Defender (New) L663 2020–2026 Not Compatible ⚠️ This is the standard non-anti-theft version. If your vehicle was fitted with a locking spare tyre winch from the factory, please verify your requirement before ordering. Anti-theft variants carry a different part number. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Basic Hand Tools Open the rear tailgate and remove the load floor panel to access the spare tyre winch housing in the lower boot area. Using the vehicle's drop rod, fully lower the existing spare tyre and remove it from the carrier hook beneath the vehicle. Disconnect the winch cable from the carrier cradle and unclip any retaining hardware securing the cable to the chassis. Remove the winch assembly mounting bolts (typically two to three fasteners) and withdraw the old winch unit from its housing. Offer the new LR024145 winch into position, align with the OE mounting points, and torque the bolts to specification. Thread the new winch cable through the floor guide, attach the spare carrier, and test lowering and raising function before refitting the spare tyre. Refit the spare tyre securely, retest the winch operation, and reinstall the load floor panel. ⚠️ Note: Ensure the spare tyre is fully seated and locked in the raised position before driving. Do not operate the vehicle if the winch does not hold the spare securely at full height. If in doubt, have the installation inspected by a qualified technician. Shop by Vehicle 🚙 Discovery 3 Collection 2005–2009 · L319 🚙 Discovery 4 Collection 2010–2016 · L319 🚙 Range Rover Sport L320 2005–2013 · L320 Trusted by Land Rover Owners Worldwide Victorious Automotive supplies OEM-quality Land Rover parts and accessories to enthusiasts across more than 50 countries. Every order is backed by our 30-day money-back guarantee and dispatched via DHL, FedEx, UPS, or TNT. Shop Discovery 3 Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL / FedEx / UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or authorised by Jaguar Land Rover Limited or any of its subsidiaries. Land Rover, Discovery, Range Rover, and Defender are registered trademarks of Jaguar Land Rover Limited. Part numbers are referenced for fitment identification purposes only. Always verify compatibility with your specific vehicle before ordering.

Victorious Automotive · Defender L663 · Interior Accessories Magnetic Phone Holder Bracket for Land Rover Defender 110 (2020–2026) — L663 A precision-engineered magnetic phone mount tailored to the Defender 110's interior, keeping your device locked in place and perfectly positioned for navigation, hands-free calls, and daily driving. Defender L663 2020–2026 Magnetic Mount Direct Fit Metal & ABS Plastic Tool-Free Install 300g Magnet Rating Interior Accessory Overview The 2020-onwards Land Rover Defender 110 — chassis code L663 — represents a bold, design-forward reinterpretation of an icon. Its cabin is modern, considered, and built around the driver. But like many contemporary interiors, it leaves the question of phone placement largely unanswered. Balanced on a dash, propped against the centre console, or worse, loose in the cupholder — none of it belongs in a vehicle of this calibre. This magnetic phone holder bracket is engineered specifically for the L663 Defender 110. It integrates cleanly with the existing interior architecture, using a strong rare-earth magnetic core to hold your device firmly in place regardless of terrain. Whether you're navigating urban streets or covering ground on a green lane, your phone stays exactly where you placed it — visible, accessible, and secure. The design philosophy here aligns with the Defender's own ethos: functional, purposeful, and free of unnecessary complexity. Installation requires no drilling, no permanent modification, and no specialist tools. The result is a mount that looks and feels like it belongs — because it was designed with this vehicle in mind. What's Included 🧲 Magnetic Phone Holder Main bracket with rare-earth magnetic core, rated to 300g device weight 🔲 Metal Mounting Plate Slim adhesive plate applied to rear of device or case for magnetic attachment 📄 User Manual Step-by-step installation guide with vehicle-specific placement guidance 🧹 Adhesive Prep Wipe Surface cleaning wipe included for optimal bond strength during installation Product Highlights Designed specifically for the L663 Defender 110 interior profile Rare-earth magnetic core supports devices up to 300g Tool-free installation — no drilling or permanent modification Adjustable viewing angle for portrait and landscape orientation Low-profile bracket won't obstruct vents, controls, or sightlines Compatible with all major smartphone sizes and most cases High-quality metal and ABS plastic construction resists vibration Slim metal plate sits flush behind phone case — virtually invisible Secure adhesive backing withstands heat and daily use Clean, OEM-sympathetic aesthetic that complements the L663 cabin Compatibility Vehicle Chassis Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Select your preferred mounting position within the Defender 110's cabin — the centre console area, air vent surround, or dashboard fascia are the most commonly used locations for this bracket. Use the included prep wipe to thoroughly clean the chosen surface. Remove all dust, oils, and residue, then allow the area to dry completely for at least 60 seconds. Peel the backing from the bracket's adhesive pad and press firmly onto the cleaned surface. Apply sustained pressure for 30 seconds to activate the bond. Allow a full 24 hours before subjecting the mount to load. Attach the slim metal mounting plate to the rear of your phone or inside your phone case. Press firmly and hold for 20 seconds. Place your phone against the magnetic bracket. The magnet will engage immediately. Adjust the viewing angle to your preferred position and you're ready to go. ⚠ Important: Ensure the mounting surface is fully clean and dry before application. Avoid installing on textured or soft-touch surfaces that may not provide sufficient adhesion. Do not use with MagSafe-incompatible wireless charging cases unless the metal plate is positioned away from charging coils. This bracket is designed for the L663 platform and may not suit other vehicle interiors. Built for the Defender. Trusted by Its Owners. Victorious Automotive supplies premium accessories to Defender, Range Rover, and Land Rover owners across the world. Every product we stock is chosen for quality, fitment, and how well it honours the vehicle it's designed for. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and chassis codes referenced on this page — including Defender, L663, and associated trademarks — are the property of their respective owners and are used solely for the purposes of product compatibility identification.