Automotive

Victorious Automotive · Audi A1 · Infotainment Upgrade Wireless CarPlay & Android Auto Adapter for Audi A1 2012–2018 MMI 2G/3G Retrofit wireless Apple CarPlay and Android Auto directly into your Audi A1's factory MMI system — no screen replacement, no complex wiring, no compromise. Audi A1 2012–2018 MMI 2G / 3G Wireless CarPlay Android Auto Plug & Play Siri Voice Control Rear Camera Support Model: WJAU-3 Android OS Bluetooth Overview The Audi A1 built between 2012 and 2018 ships with Audi's MMI 2G or 3G infotainment architecture — a solid system for its era, but one that predates the wireless connectivity that modern drivers expect as standard. If you've grown accustomed to seamless iPhone or Android integration and find yourself reaching for a phone mount instead of using your dashboard, this adapter was built precisely for you. This wireless CarPlay and Android Auto retrofit adapter integrates directly with your A1's existing MMI hardware via a clean plug-and-play connection. There's no need to swap your head unit, cut cables, or void your factory setup. The adapter leverages your car's existing screen, controls, and steering wheel buttons — making the upgrade feel factory-fitted rather than bolted on. Beyond CarPlay and Android Auto, the adapter runs a full Android operating system, opening up YouTube, Netflix, Spotify, Waze, and more through Airplay and mirror-linking. USB flash drive support adds offline media playback, and rear or front camera compatibility makes it a genuinely comprehensive infotainment upgrade for a car that deserves better than its original spec. What's Included 📦 CarPlay Adapter Module WJAU-3 unit, model-specific for Audi MMI 2G/3G 🔌 Plug-and-Play Harness Factory-connector compatible wiring loom 📡 Wireless Antenna For stable wireless phone pairing 🎥 RCA Camera Input Supports aftermarket front or rear cameras 📋 Installation Guide Step-by-step setup instructions included 🔧 Mounting Hardware All fixings required for clean installation Product Highlights Wireless Apple CarPlay — connect your iPhone without a cable Android Auto & Android Mirror-Linking support built-in Real-time GPS navigation via Google Maps, Waze, and Apple Maps Siri voice control fully functional through factory microphone Hands-free calling via Bluetooth with OEM audio output Stream YouTube, Netflix, and Spotify via Airplay or mirroring Offline video and music playback via USB flash drive Supports aftermarket front, rear, or 360-degree cameras via RCA Steering wheel control retention — no button remapping needed Plug-and-play install into existing MMI 2G/3G — no head unit swap Compatibility Model Year Range MMI System Fitment Audi A1 2012 – 2018 MMI 2G / 3G Direct Fit Audi Q3 2012 – 2018 MMI 2G / 3G Direct Fit Audi A1 (Pre-2012) Before 2012 Non-MMI Not Compatible Audi A1 (Post-2018) 2019 onwards MIB2 / MIB3 Not Compatible Other Audi Models Various MMI 2G / 3G Verify Before Purchase ⚠ Compatibility Note: This adapter is designed specifically for vehicles fitted with Audi MMI 2G or MMI 3G systems. If you are unsure which MMI version your vehicle has, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Remove the MMI head unit from the Audi A1 dashboard using appropriate trim removal tools. Take care not to damage surrounding trim panels. Locate the factory MMI connector at the rear of the head unit. The adapter harness connects directly here — no splicing or cutting required. Route the adapter module to a suitable location behind the head unit or within the centre console void, ensuring adequate ventilation. If connecting an aftermarket camera, run the RCA cable to the desired camera location at this stage before reassembling trim. Reconnect the factory MMI connectors through the adapter harness, then reinstall the head unit into the dashboard. Power on the vehicle and follow the on-screen pairing instructions to connect your iPhone or Android device wirelessly via Bluetooth and Wi-Fi. Test steering wheel controls, audio output, navigation, and camera feed before completing the installation. ⚠ Important: Always disconnect the vehicle's battery negative terminal before working on infotainment or electrical components. If you are not confident with automotive electrical work, we recommend professional installation to protect your vehicle's warranty and avoid unintended faults. Upgrade Your Audi A1's Infotainment Join over 12,300 verified customers who trust Victorious Automotive for precision-fit vehicle upgrades. Worldwide delivery via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop Infotainment Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or associated with Audi AG, Volkswagen Group, Apple Inc., or Google LLC. All brand names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Audi Q3 · Infotainment Upgrade Wireless CarPlay & Android Auto Adapter for Audi Q3 2012–2018 MMI 2G/3G Transform your Audi Q3's original MMI system into a fully connected, wireless CarPlay and Android Auto hub — with zero screen replacement required. Audi Q3 · 2012–2018 MMI 2G / 3G Wireless CarPlay Android Auto Plug & Play Siri Voice Control Rear Camera Support Model: WJAU-3 Android OS Bluetooth Overview The Audi Q3 — built between 2012 and 2018 — was designed with Audi's signature MMI interface, which was ahead of its time but now falls short of the seamless smartphone connectivity that modern drivers expect. Whether your Q3 is running MMI 2G or 3G, the factory system simply wasn't engineered for wireless CarPlay, Android Auto, or the streaming services that define how we use our phones on the road today. This wireless CarPlay adapter for the Audi Q3 is a purpose-built retrofit solution that integrates directly into your existing MMI unit via the factory interface — no screen swaps, no invasive wiring, no loss of your original controls. Running on a dedicated Android platform with 1GB RAM and 8GB ROM, it operates independently of your phone's processing power, delivering a consistently smooth, responsive experience across Apple CarPlay, Android Auto, iOS Airplay, and Android Mirror-Linking. Once connected, you gain access to real-time navigation via Google Maps or Waze, hands-free calling, Siri voice control, Spotify, YouTube, Netflix, and full USB media playback — all displayed on your factory MMI screen and controlled through the original MMI dial and buttons. For Q3 owners who want genuine smart connectivity without compromising the factory aesthetic, this is the definitive upgrade. What's Included 📦 CarPlay Adapter Module Model WJAU-3 · Android OS · 1GB RAM / 8GB ROM 🔌 Factory MMI Interface Harness Direct plug-in for MMI 2G & 3G systems 📡 Wireless Antenna For stable wireless CarPlay & Android Auto pairing 🎥 RCA Video Input Cable Supports aftermarket front or rear camera feed 🖥️ USB Flash Port Supports offline media playback up to 8GB 📋 Installation Guide Step-by-step setup instructions included Product Highlights Wireless Apple CarPlay — no USB cable needed once paired Wireless Android Auto & full Android Mirror-Linking Real-time navigation via Google Maps, Waze, and Apple Maps Siri & Google Assistant voice control, fully hands-free iOS Airplay for screen mirroring from iPhone or iPad Streams YouTube, Netflix, and Spotify over Wi-Fi or hotspot Supports aftermarket front, rear, and 360° camera inputs via RCA Offline video & music playback via USB flash drive (up to 8GB) Steering wheel control compatibility retained via factory interface Plug-and-play design — preserves original MMI look and feel Compatibility Model Year Range MMI System Fitment Audi Q3 2012 – 2018 MMI 2G Direct Fit Audi Q3 2012 – 2018 MMI 3G Direct Fit Audi A1 2012 – 2018 MMI 2G / 3G Direct Fit Audi Q3 (F3) 2019 – Present MIB3 / MIB4 Not Compatible Audi Q3 without MMI 2012 – 2018 No MMI fitted Not Compatible ⚠ Unsure of your MMI version? Check your MMI unit's version number in the settings menu under "System Information," or contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. We're happy to confirm compatibility for your specific vehicle. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Carefully remove the MMI control panel surround using a trim removal tool to avoid scratching the dash. Locate the factory MMI harness connector at the rear of the unit and disconnect it from the head unit. Connect the adapter's harness to the factory MMI plug, then reconnect to the head unit — the adapter sits inline between the two. Route the wireless antenna to a discreet location with line-of-sight to the cabin (above the headliner or behind the trim panel). If using a rear or front camera, connect the RCA video cable to the corresponding camera output. Refit the MMI surround trim, power on the vehicle, and follow the on-screen pairing instructions to connect your phone via Bluetooth or Wi-Fi. On first use, accept the CarPlay or Android Auto prompt on your phone. Subsequent connections are automatic and wireless. ⚠ Important: Ensure your vehicle's ignition is fully off before beginning installation. Do not force any connectors — the MMI harness is keyed and will seat correctly without excessive pressure. If you are not confident working with in-car electronics, we recommend professional installation. Upgrade Your Audi Q3 Experience Your Q3 deserves more than a seven-year-old infotainment experience. This adapter brings genuine wireless connectivity to your factory MMI — no compromise, no clutter, no cutting corners. Shipped worldwide via DHL, FedEx, UPS, and TNT, and backed by our 30-day money-back guarantee. Shop More Infotainment Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🚚 Worldwide Shipping · DHL · FedEx · UPS · TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Audi AG, Volkswagen Group, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchasing.

BMW · EVO iDrive System · Connectivity Upgrade BMW Wireless Apple CarPlay Adapter for EVO iDrive — Plug-and-Play Smart Integration Upgrade your BMW's factory EVO iDrive display to full wireless Apple CarPlay with HD video streaming, voice control, and Android mirroring — no cable, no compromise. BMW EVO System Wireless CarPlay Android 1GB RAM / 8GB ROM 6.5" · 8.8" · 10.2" Display Bluetooth Connectivity RCA Interface 12V Power Plug-and-Play Install HD Airplay / Android Mirror Aftermarket Camera Support Overview BMW's EVO iDrive system is one of the most capable factory infotainment platforms in the segment — but its native wired CarPlay setup can feel limiting in an era where wireless connectivity is the expectation. If you're spending time behind the wheel of a 3 Series, 5 Series, X3, X5 or any compatible EVO-equipped BMW, you deserve an experience that keeps pace with how you actually use your phone. This Wireless Apple CarPlay Adapter integrates directly with your existing EVO head unit, transforming it into a fully connected smart display. Built on an Android-powered platform with 1GB RAM and 8GB ROM, the unit supports real-time navigation, online music streaming, HD Airplay video mirroring, and full Android device screen projection — all through your vehicle's factory screen. No aftermarket head unit replacement. No destructive modification. Just a clean, confident upgrade. Beyond CarPlay itself, the adapter unlocks genuine everyday functionality that the stock system simply doesn't offer: aftermarket reversing camera integration, rear-seat entertainment via mirror-link, hands-free calling over Bluetooth, and voice assistant access via Siri or Google Assistant. Compatible with 6.5", 8.8", and 10.2" EVO display sizes, it's a versatile solution engineered for drivers who want more from their driving environment without altering what makes their BMW a BMW. What's Included 📦 Wireless CarPlay Adapter Android-based, 1GB RAM / 8GB ROM — 18×12×8cm unit 📘 User Manual Step-by-step setup and pairing instructions 🔧 Installation Kit All required hardware and wiring adapters included 🔌 RCA Interface Cable For camera and auxiliary device connectivity Product Highlights Wireless Apple CarPlay — no cable required, pairs instantly on ignition Android Auto Mirroring — full screen projection from Android devices Real-Time Navigation — Google Maps, Waze and Apple Maps supported Online Music Streaming — Spotify, Apple Music, YouTube Music and more HD Airplay Video Streaming — mirror content in HD to your factory display Aftermarket Camera Support — reversing and surround camera integration via RCA Mirror-Link Enabled — rear passenger entertainment and screen sharing Voice Control — Siri and Google Assistant hands-free access Hands-Free Calling — Bluetooth-powered call management via the display Plug-and-Play Design — no permanent modification to your factory EVO system Compatibility Model EVO System Display Size Fitment BMW 3 Series (F30 / G20) EVO iDrive 6.5" / 8.8" Direct Fit BMW 5 Series (F10 / G30) EVO iDrive 8.8" / 10.2" Direct Fit BMW X3 (F25 / G01) EVO iDrive 6.5" / 8.8" Direct Fit BMW X5 (F15 / G05) EVO iDrive 10.2" Direct Fit BMW X1 (F48) EVO iDrive 6.5" / 8.8" Direct Fit BMW 7 Series (G11 / G12) EVO iDrive 10.2" Direct Fit BMW Models with Non-EVO NBT / CIC / CCC Legacy iDrive Various Not Compatible BMW iDrive 8 / Curved Display Models (i4, iX, G80 M3) iDrive 8 Various Verify Before Purchase Installation Notes Difficulty: Intermediate  ·  Estimated Time: 30–60 Minutes Confirm your BMW is equipped with the EVO iDrive system and note your factory display size (6.5", 8.8", or 10.2") before beginning. Power down the vehicle and disconnect the iDrive unit from the factory harness using the connectors provided in the installation kit. Connect the Wireless CarPlay Adapter inline between the factory harness and the iDrive unit using the supplied interface cables. If integrating an aftermarket reversing camera, route and connect the RCA interface cable to your camera output at this stage. Secure the adapter unit in a suitable location behind the dashboard or within the centre console void, ensuring no pinching of cables. Reconnect the vehicle power and follow the on-screen pairing wizard to connect your iPhone via Bluetooth for wireless CarPlay activation. Test all functions — navigation, media, voice control, and camera feed — before refitting any trim panels. ⚠ Important: Professional installation is strongly recommended to preserve your factory wiring integrity and ensure optimal performance. Always verify EVO system compatibility with your specific model year and build spec prior to purchase. Incorrect installation may affect factory system functionality. Upgrade Your Drive. Keep Your BMW Exactly As It Should Be. The best in-car technology shouldn't require compromising what you love about your vehicle. This adapter delivers wireless CarPlay, HD streaming, and smart connectivity through your factory EVO display — cleanly, confidently, and without a trace. Shop the Full Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by BMW AG, Apple Inc., or any associated OEM. All brand names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of describing product compatibility. Always verify fitment with your specific vehicle build specification prior to purchase.

Victorious Automotive · BMW CCC · Infotainment Upgrades BMW CCC Wireless Apple CarPlay Adapter — 2004–2009 E-Series Models Bring full wireless Apple CarPlay connectivity to your BMW's original CCC screen — no cutting, no permanent modifications, no compromise on build quality. CCC Platform 2004–2009 Wireless CarPlay Android OS Bluetooth Built-in GPS Aluminium Housing Double DIN Steering Wheel Control Mirror Link Overview BMW's CCC (Car Communication Computer) platform was ahead of its time when it debuted in the mid-2000s, but today's connected driver expects more — specifically, seamless smartphone integration without reaching for a cable. If you own an E81, E87, E90, E60, E63, E70 or similar CCC-equipped BMW, this adapter was purpose-built for your vehicle's architecture. This wireless CarPlay adapter slots directly into your existing Double DIN bay and interfaces with the CCC system, delivering full Apple CarPlay and Android mirror-link functionality through your factory display. The Android-based unit runs independently of your phone's battery, supports real-time navigation, hands-free calling via Bluetooth, Siri voice control, and offline media playback — all without any permanent wiring changes to your vehicle. The aluminium housing keeps heat dissipation efficient and adds a premium finish in line with BMW's interior standards. With support for aftermarket cameras, steering wheel controls, and AirPlay HD video mirroring, this is one of the most complete infotainment upgrades available for the CCC generation of BMW. What's Included 📦 Wireless CarPlay Adapter CCC-compatible Double DIN unit with aluminium housing 📄 Instruction Manual Step-by-step installation and pairing guide Product Highlights Wireless Apple CarPlay — no cable required, pairs instantly via Bluetooth then switches to Wi-Fi Android Mirror-Link — full Android screen mirroring for compatible smartphones Real-Time Navigation — Google Maps, Waze and Apple Maps fully supported Online Music Streaming — Spotify, Apple Music and more through your car's speakers Siri Voice Control — completely hands-free operation while driving Hands-Free Calling — Bluetooth-integrated phone calls via factory microphone Aftermarket Camera Support — connect a reversing or surround camera to the unit Steering Wheel Control Compatibility — retain your existing steering wheel media controls Offline Media via USB — play music and video from a USB flash drive without a phone connection AirPlay HD Video Mirroring — stream HD video wirelessly from iPhone to your factory screen Compatibility Model Chassis Code Years Fitment 1 Series Hatchback 3dr E81 2004–2008 Direct Fit 1 Series Coupé E82 2004–2008 Direct Fit 1 Series Hatchback 5dr E87 2004–2008 Direct Fit 1 Series Convertible E88 2004–2008 Direct Fit 3 Series Saloon E90 2005–2008 Direct Fit 3 Series Touring E91 2005–2008 Direct Fit 3 Series Coupé E92 2005–2008 Direct Fit 3 Series Convertible E93 2005–2008 Direct Fit 5 Series Saloon E60 2003–2008 Direct Fit 5 Series Touring E61 2003–2008 Direct Fit 6 Series Coupé E63 2003–2008 Direct Fit 6 Series Convertible E64 2003–2008 Direct Fit X5 E70 2007–2009 Direct Fit X6 Hybrid E72 2008–2009 Direct Fit CIC / NBT Platform Models Various 2009+ Not Compatible Specifications Specification Detail Platform Compatibility BMW CCC (Car Communication Computer) Form Factor Double DIN Display Sizes Supported 6.5", 8.8", 10.2" Operating System Android RAM 1 GB Max External Memory 8 GB TF / Micro SD Slot 1 slot Output Power 0.01 kW Housing Material Aluminium Item Weight 1 kg Special Features Bluetooth, Built-in GPS, CarPlay, Mirror-Link, Steering Wheel Control, MP3 Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes Safely disconnect your BMW's battery negative terminal before beginning any work on the dashboard or infotainment bay. Remove the factory CCC head unit using appropriate trim removal tools — take care around the iDrive controller surround and climate fascia clips. Disconnect all factory harness connectors from the back of the CCC unit and set it aside safely. Connect the adapter's harness to the factory connectors using the supplied loom — the unit is designed as a direct plug-in replacement for the CCC bay. Carefully slide the adapter into the Double DIN aperture, ensuring it sits flush with the surrounding trim and securing any mounting brackets. Reconnect the battery, power on the vehicle and follow the on-screen pairing guide to connect your iPhone via Bluetooth for initial handshake — CarPlay then transfers to Wi-Fi automatically. Configure steering wheel control mapping and camera input settings through the unit's Android settings menu as required. ⚠ Important: Verify your vehicle is equipped with the CCC platform (not CIC or NBT) before purchasing. Check your existing head unit — CCC units display "Navigation" or "Business" branding and were fitted to pre-2009 E-Series models. Professional installation is recommended to preserve your vehicle's wiring integrity and warranty standing. Upgrade Your BMW's Infotainment Today Give your CCC-equipped BMW the connected experience it deserves. Wireless CarPlay, real-time navigation, and hands-free calling — all through your factory screen. Orders ship worldwide via DHL, FedEx, UPS and TNT. Shop Now at Victorious Use Code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL · FedEx · UPS · TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by BMW AG, Apple Inc., or any of their subsidiaries. All manufacturer names, model designations, and chassis codes are used for fitment reference purposes only. Ensure compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · BMW · Infotainment Upgrades BMW CIC Adapter Box — Wireless Apple CarPlay Integration for Compatible BMW Models Retrofit wireless Apple CarPlay to your BMW's CIC head unit with a clean, plug-and-play adapter box that delivers Android-powered navigation, mirroring, and hands-free connectivity without replacing your original screen. BMW CIC Wireless CarPlay Android OS 1G RAM / 8G ROM Aluminum Housing 12V Steering Wheel Control Plug-and-Play HD Video Streaming 8.8" / 6.5" / 10.2" Display Overview BMW's CIC (Car Information Computer) infotainment platform was a landmark system when introduced, delivering a refined iDrive experience across a wide range of 3 Series, 5 Series, 6 Series, X3, X5, and X6 models. However, it predates wireless smartphone integration entirely — leaving owners with a capable screen but no native path to Apple CarPlay, real-time navigation, or streaming audio. That gap no longer needs to exist. This BMW CIC Adapter Box is an Android-based interface module that sits between your existing CIC head unit and its display, effectively adding a full wireless CarPlay and Android entertainment layer without removing or permanently modifying any factory components. Powered by a dedicated Android OS with 1G of RAM and 8G of onboard storage, it handles everything from Siri voice control and Google Maps to HD video streaming via Airplay and Android mirroring — all presented on your vehicle's original screen. The adapter supports display sizes of 8.8", 6.5", and 10.2" and retains compatibility with your BMW's steering wheel controls, making the experience feel deeply integrated rather than bolted on. Aftermarket camera inputs are supported, and the aluminium housing ensures heat dissipation and long-term durability in an under-dash environment. For BMW owners who want the conveniences of a modern infotainment system without the cost or irreversibility of a full head unit swap, this adapter represents the most elegant solution available. What's Included 📦 CIC Adapter Box Android-powered wireless CarPlay module, aluminium housing 📄 Installation Guide Step-by-step instructions for CIC system integration Product Highlights Wireless Apple CarPlay — connect your iPhone without a cable for a clutter-free cabin Android OS platform with 1G RAM and 8G ROM for smooth, responsive performance Real-time navigation via Google Maps, Waze, and Apple Maps through CarPlay Online music streaming — Spotify, Apple Music, and more through your existing speakers HD video streaming via Airplay and Android screen mirroring Hands-free calling and full Siri voice control integration Supports aftermarket reverse and surround cameras via auxiliary input Mirror-link compatibility for Android smartphones Steering wheel control retention — no remapping required Supports 8.8", 6.5", and 10.2" original BMW CIC display sizes Compatibility Vehicle / Platform Head Unit Type Compatibility BMW 3 Series (E90/E91/E92/E93) with CIC CIC iDrive Direct Fit BMW 5 Series (F10/F11) with CIC CIC iDrive Direct Fit BMW 6 Series (F12/F13) with CIC CIC iDrive Direct Fit BMW X3 (F25) with CIC CIC iDrive Direct Fit BMW X5 (E70) with CIC CIC iDrive Direct Fit BMW X6 (E71) with CIC CIC iDrive Direct Fit BMW models with NBT / EVO head unit NBT / EVO iDrive Not Compatible BMW models with CCC head unit CCC iDrive Not Compatible Non-BMW vehicles Various Not Compatible ⚠ Compatibility Note: This adapter is designed exclusively for BMW vehicles fitted with the CIC (Car Information Computer) iDrive system. It is not compatible with CCC, NBT, or EVO-generation head units. Please confirm your exact head unit type before ordering. If you are unsure, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will verify compatibility for your specific model and build date. Installation Notes ⚙ Installation Overview — Difficulty: Moderate · Estimated Time: 60–90 Minutes Confirm your BMW is fitted with the CIC iDrive system by checking the iDrive menu version or consulting your vehicle documentation. Disconnect the vehicle battery before beginning any work on the infotainment system to prevent electrical faults. Remove the trim panel surrounding the CIC head unit using appropriate trim tools — take care not to damage climate control or iDrive controller wiring. Locate the CIC display connector and video input harness at the rear of the head unit assembly. Connect the CIC Adapter Box inline using the provided harness connections, following the installation guide supplied in the box. Secure the adapter box in a suitable under-dash location with adequate ventilation — the aluminium housing dissipates heat effectively but requires airflow. Reconnect the battery and power on the system to verify the adapter initialises correctly on your BMW's display. Pair your iPhone wirelessly via the adapter's CarPlay setup menu and confirm steering wheel controls are functioning as expected. ⚠ Professional Installation Recommended: While this adapter is designed for integration with existing CIC wiring, incorrect connection can result in display errors or head unit faults. We strongly recommend professional installation by a qualified BMW technician or automotive AV specialist for optimal performance and to preserve your factory system's integrity. Upgrade Your BMW's Infotainment — Without Compromise Your BMW's CIC screen is already there. This adapter simply unlocks everything it was never designed to do — wirelessly, cleanly, and without a trace. Shop the full range of infotainment upgrades and accessories at Victorious Automotive. Shop All Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by BMW AG, Apple Inc., or any of their subsidiaries. BMW, iDrive, and CIC are registered trademarks of BMW AG. Apple CarPlay is a registered trademark of Apple Inc. All trademarks are referenced solely for fitment and compatibility identification purposes. Always verify compatibility with your specific vehicle before purchasing. Professional installation is recommended.

BMW · NBT System · Wireless Connectivity BMW NBT Wireless Apple CarPlay Adapter Box Retrofit wireless Apple CarPlay and full smartphone mirroring to BMW NBT-equipped models — no cables, no compromise, factory-finish integration. NBT System Wireless CarPlay Android Mirroring Plug & Play AirPlay Support 12V Aluminium Housing 8.8" / 6.5" / 10.2" Overview BMW's NBT (Next Big Thing) iDrive system was ahead of its time, but factory CarPlay support was either absent or restricted to a wired connection. For owners who demand a cleaner, more capable cockpit experience, this gap has long been a frustration — particularly given how refined everything else about the NBT platform is. This NBT Wireless Apple CarPlay Adapter Box bridges that gap entirely. Engineered specifically for BMW's NBT head unit architecture, the adapter integrates at the system level to deliver native-feeling wireless CarPlay, Android screen mirroring, AirPlay video streaming, and full voice control via Siri — all displayed through your existing factory screen without any modifications to the dash or original hardware. Built into an aluminium housing and designed to be tucked discreetly behind the dash, this adapter draws power directly from the vehicle's 12V supply and connects via the existing iDrive infrastructure. The result is a seamless upgrade that feels as though it left the factory that way — and performs to the standard expected of a premium BMW cabin. What's Included 📦 Wireless CarPlay Adapter Main NBT-compatible adapter unit in aluminium housing 📖 User Manual Step-by-step setup and configuration guide 🔧 Installation Kit All required cables, connectors and mounting hardware Product Highlights Fully wireless Apple CarPlay — no USB cable required once paired Android screen mirroring for full smartphone display on your iDrive screen Real-time navigation via Apple Maps, Google Maps or Waze Stream music wirelessly from Spotify, Apple Music, YouTube Music and more Siri voice control for completely hands-free operation while driving Hands-free calling integrated through your existing BMW audio system AirPlay video mirroring for HD content from iOS devices Compatible with aftermarket and OEM reversing cameras Supports displays sized 6.5", 8.8" and 10.2" across NBT variants Discreet aluminium-housed unit — no visible changes to the factory interior Compatibility Vehicle / System Head Unit Display Size Fitment BMW 1 Series F20/F21 (2013–2019) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 2 Series F22/F23 (2013–2021) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 3 Series F30/F31 (2012–2019) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 4 Series F32/F33/F36 (2013–2020) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 5 Series F10/F11 (2013–2017) NBT 10.2" Direct Fit BMW 6 Series F06/F12/F13 (2013–2018) NBT 10.2" Direct Fit BMW 7 Series F01/F02 (2012–2015) NBT 10.2" Direct Fit BMW X1 F48 (2015–2019) NBT Evo 8.8" Direct Fit BMW X3 F25 (2014–2017) NBT 8.8" Direct Fit BMW X5 F15 (2013–2018) NBT 10.2" Direct Fit BMW X6 F16 (2014–2019) NBT 10.2" Direct Fit BMW models with CIC system (pre-2013) CIC Various Not Compatible BMW models with MGU / iDrive 7+ (post-2019) MGU / ID7 Various Not Compatible Installation Notes ⏱ Estimated Time: 45–90 minutes  |  🔧 Difficulty: Intermediate Confirm your vehicle has an NBT or NBT Evo head unit by checking the iDrive system menu or VIN decoder before beginning. Disconnect the vehicle battery negative terminal and allow the iDrive system to fully power down. Remove the centre console trim and glovebox panels as required to access the rear of the iDrive head unit — refer to your vehicle's service manual for panel removal sequences. Locate the LVDS and USB/power harness connectors on the rear of the NBT unit and connect the supplied adapter harness in-line using the included installation kit. Mount the adapter box in a suitable location behind the dash using the provided brackets, ensuring clearance from heat sources and moving components. Reconnect the battery, power on the vehicle and follow the on-screen pairing wizard to connect your iPhone via Bluetooth for wireless CarPlay activation. Verify all functions — CarPlay, mirroring, camera input and audio — before refitting all trim panels. ⚠ Important: Verify your exact head unit variant (NBT vs NBT Evo) prior to installation — connector pinouts differ between generations. If in doubt, consult a qualified BMW technician. Incorrect connection may cause iDrive system faults. Technical Specifications Specification Detail Compatible System BMW NBT / NBT Evo iDrive Supported Display Sizes 6.5", 8.8", 10.2" Operating System Android (embedded) RAM 1GB Max External Memory 8GB Output Power 0.01kW Input Voltage 12V DC Housing Material Aluminium Unit Dimensions 180mm × 120mm × 80mm Wireless Protocol Bluetooth 5.0 + Wi-Fi 2.4GHz/5GHz Upgrade Your BMW iDrive Experience Wireless CarPlay shouldn't be a luxury reserved for newer models. This NBT adapter gives your BMW the seamless smartphone integration it always deserved — cleanly, discreetly, and without touching the factory interior. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by BMW AG or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Porsche Panamera · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Panamera (2010–2016) – PCM 3.1 Bring full wireless Apple CarPlay and Android Auto to your 2010–2016 Porsche Panamera PCM 3.1 system — plug-and-play fitment, zero permanent modification. Porsche Panamera PCM 3.1 2010–2016 Wireless CarPlay Android Auto Plug & Play Siri Voice Control Reverse Camera Support Android Mirroring Aluminium Housing Overview The Porsche Panamera built between 2010 and 2016 came equipped with Porsche Communication Management 3.1 — a competent system for its era, but one that predates the smartphone integration that modern driving demands. If you've grown accustomed to using Apple Maps, Waze, Spotify, or hands-free calling through CarPlay in other vehicles, returning to PCM's native interface can feel like a step back. This wireless Apple CarPlay adapter is engineered specifically for the PCM 3.1 platform found across the 2010–2016 Panamera lineup. It connects directly into the existing architecture of your Porsche's infotainment system without replacing the head unit, preserving all OEM functionality while layering in full wireless CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. Your Porsche retains its factory look — there are no aftermarket screens, no cut wires, and no evidence of modification. The adapter communicates with your iPhone via Bluetooth for the initial pairing handshake, then switches automatically to a stable Wi-Fi connection for full wireless CarPlay performance. Steering wheel controls, the PCM NAVI button, and your original microphone circuit all remain functional — with a dedicated replacement microphone included to maintain hands-free call quality since the OEM unit shares circuitry with the SOS system. What's Included 📦 PCM 3.1 CarPlay Module Main adapter unit, aluminium housing, silver finish 🎙️ Replacement Microphone For hands-free calling, bypasses SOS-integrated OEM mic 🔌 Vehicle Harness Cable Direct-connect loom for PCM 3.1 interface 🔩 Mounting Hardware Includes additional screws for Sirius Satellite Radio-equipped vehicles 📄 Installation Guide Step-by-step printed instructions 💾 USB Flash Support Play offline media directly via USB input (up to 32GB) Product Highlights Wireless Apple CarPlay — connect via Bluetooth + Wi-Fi, no USB cable needed Wired Apple CarPlay also supported for maximum stability preference Android Auto compatibility for Google Maps, Assistant, and media apps Android screen mirroring for full phone display on PCM screen Original PCM steering wheel and dashboard button controls retained Siri voice control for safe, hands-free iPhone interaction Supports aftermarket front and reverse cameras via camera input AirPlay and Android Mirror-Link for HD video and music streaming USB Flash Drive playback for offline video and music without internet Plug-and-play installation — no permanent modification to OEM wiring Compatibility Model Year Range PCM Version Fitment Panamera 2010–2016 PCM 3.1 Direct Fit Cayenne 2010–2016 PCM 3.1 Direct Fit Macan 2010–2016 PCM 3.1 Direct Fit Cayman 2010–2016 PCM 3.1 Direct Fit Boxster 2010–2016 PCM 3.1 Direct Fit 911 / 991 2010–2016 PCM 3.1 Direct Fit 718 2010–2016 PCM 3.1 Direct Fit Any model with CD-AUX button (no NAVI) — Non-PCM 3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Confirm your Porsche PCM has a NAVI button on the control panel. If only a CD-AUX button is present, this adapter will not function — do not proceed. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation. We will include specific supplementary screws required for your configuration. Remove the PCM 3.1 head unit from the dash using appropriate trim removal tools — take care not to damage surrounding trim panels. Disconnect the OEM wiring harness from the rear of the PCM unit and connect the supplied adapter harness in-line between the PCM and the vehicle loom. Route and connect the replacement microphone to the adapter — do not reconnect the original OEM microphone, as it shares circuitry with the vehicle's SOS emergency system. Secure the CarPlay module in an accessible cavity behind the dash. Ensure no pinched cables before refitting the head unit. Refit the PCM unit, power up the vehicle, and follow the on-screen pairing instructions to connect your iPhone via Bluetooth for the initial wireless CarPlay setup. ⚠ Important: The original factory microphone must not be reused. It is integrated with the Porsche SOS emergency call system. The included replacement microphone provides equivalent call quality without interfering with safety systems. Driven by Detail. Built for Enthusiasts. At Victorious Automotive, every product we list is selected because it genuinely improves the ownership experience. If you have questions about fitment, PCM version, or installation for your specific Panamera, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop All In-Car Technology Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification. Apple CarPlay® is a registered trademark of Apple Inc. Android Auto™ is a trademark of Google LLC.

Victorious Automotive · Porsche Macan · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche Macan 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay and Android Auto to your Porsche Macan's factory PCM3.1 system — plug-and-play, no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Porsche Macan Plug & Play Siri Voice Control Camera Support Steering Wheel Control iOS & Android Overview The Porsche Macan (2010–2016) equipped with the PCM3.1 infotainment system is a driver's machine — precise, purposeful and beautifully engineered. But its factory connectivity falls short of what today's drivers expect. Native Apple CarPlay or Android Auto simply wasn't available at the time of manufacture, leaving owners relying on outdated Bluetooth audio or cable workarounds that feel out of place in a car of this calibre. This PCM3.1 wireless Apple CarPlay adapter resolves that entirely. Engineered specifically for Porsche's factory head unit, it integrates seamlessly behind the scenes — no screen replacement, no head unit swap, no permanent wiring changes. Once installed, your existing PCM3.1 display becomes a fully functional CarPlay and Android Auto interface, accessible wirelessly from your iPhone the moment you get in the car. Steering wheel controls continue to function as expected, original buttons retain their factory behaviour, and a dedicated microphone is included to preserve safe hands-free calling — since the factory microphone is tied to Porsche's SOS system. This is the clean, factory-grade upgrade your Macan deserves. What's Included 📦 CarPlay Adapter Module PCM3.1-specific interface box 🎙️ Dedicated Microphone For hands-free calls, replaces SOS-integrated mic 🔌 Wiring Harness Direct plug-in, no splicing required 🔧 Mounting Hardware Includes screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step instructions included 🖥️ USB Cable For wired CarPlay connection option Product Highlights Wireless Apple CarPlay — no cable needed, connects automatically via Bluetooth Wired Apple CarPlay support also available for maximum stability Android Auto compatibility for all major Android smartphones Android screen mirroring for full device display on PCM3.1 Siri voice control for safe, hands-free operation while driving Original steering wheel and factory PCM buttons remain fully functional Front and reverse aftermarket camera support built in Airplay and Android mirror-linking for HD video streaming USB flash drive playback for offline music and video True plug-and-play installation — no permanent vehicle modifications Compatibility Model Years System Fitment Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Porsche Models with CD-AUX Button Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic trim tools, screwdrivers Confirm your Porsche's control panel has a NAVI button — this adapter requires PCM3.1 with NAVI functionality. If your vehicle has a CD-AUX button instead, this unit will not be compatible. Remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Disconnect the factory connectors carefully. Connect the included wiring harness to the rear of the factory PCM3.1 unit and to the adapter module — no wire cutting or permanent modification is required. Fit the dedicated microphone in a discreet location near the driver (sun visor or A-pillar area recommended) and route the cable tidily behind trim panels. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation — additional screws will be dispatched to ensure correct fitment. Refit the PCM3.1 unit and all trim panels. Power on the vehicle and pair your iPhone or Android device via Bluetooth to activate wireless CarPlay or Android Auto. Important: The factory microphone in PCM3.1-equipped Porsche models is integrated with the vehicle's SOS emergency system. This adapter includes a separate microphone to maintain hands-free calling functionality without disrupting the SOS system. Always use the supplied microphone. Upgrade Your Porsche's Connectivity Join over 12,300 satisfied customers who've transformed their driving experience with Victorious Automotive. Every order ships worldwide via DHL, FedEx, UPS or TNT — and is backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 🚚 Worldwide Shipping · DHL / FedEx / UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG, Apple Inc., or Google LLC. Apple CarPlay and Android Auto are trademarks of their respective owners. All product names and vehicle references are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase. Installation should be carried out by a qualified technician where appropriate.

Porsche · Boxster 2010–2016 · Infotainment Upgrade Wireless Apple CarPlay Adapter for Porsche Boxster 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full smartphone mirroring to your Porsche Boxster's factory PCM3.1 screen — no head unit replacement required. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Aluminium Housing Overview The Porsche Boxster is a driver's car in every sense — precise, communicative, and deeply rewarding. But for all its engineering brilliance, the PCM3.1 infotainment system found in 2010–2016 examples was never designed with modern smartphone integration in mind. Navigation felt dated, music playback was cumbersome, and hands-free calling was far from seamless. This Wireless Apple CarPlay adapter plugs directly into your Boxster's existing PCM3.1 architecture and unlocks a completely transformed in-car experience. Using your car's native display and original controls, you gain full access to wireless Apple CarPlay, wired CarPlay, Android Auto, and Android Mirroring — without touching your factory head unit or voiding your setup. Designed as a true plug-and-play module, the adapter communicates via CAN-Bus, preserving your steering wheel controls and original button layout. Installation requires no cutting or splicing — it simply slots into place, making it as clean as it is capable. Whether you're navigating via Waze, streaming Spotify, or simply taking a call hands-free with Siri, this adapter makes every drive measurably better. What's Included 📦 CarPlay Adapter Module PCM3.1 compatible, aluminium housing 🎙️ External Microphone Dedicated mic for hands-free calls 🔌 Wiring Harness Direct-fit CAN-Bus connector 🔩 Mounting Hardware Includes screws for Sirius Radio fitments 📄 Installation Guide Step-by-step fitment instructions Product Highlights Wireless Apple CarPlay — no cable needed once paired Wired Apple CarPlay also supported for stable connections Android Auto compatibility for Google-ecosystem users Android Mirroring to cast your phone screen directly Siri voice control for fully hands-free operation Original steering wheel controls remain fully functional Supports aftermarket front and reverse cameras Offline media playback via USB flash drive (up to 32GB) Airplay and Android Mirror-linking for HD video streaming Plug-and-play CAN-Bus integration — no head unit swap required Compatibility Model Years System Fitment Boxster 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Cayman 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any Porsche with CD-AUX button — Non-PCM3.1 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Confirm your Boxster's PCM system has a NAVI button on the control panel. If your car features a CD-AUX button instead, this adapter is not compatible — please contact us before ordering. If your vehicle has Sirius Satellite Radio installed, contact us prior to ordering — we will include the additional screws needed to accommodate this fitment. Remove the factory PCM3.1 unit following standard Porsche trim removal procedures (no cutting or permanent modification required). Connect the adapter's CAN-Bus harness to the factory wiring loom using the included plug-and-play connector. Route and secure the dedicated external microphone — this replaces the original mic, as the factory microphone is integrated with the SOS emergency system. Reassemble the trim, power on the system, and follow the on-screen pairing guide to connect your iPhone or Android device. ⚠ Important: A dedicated external microphone is included and must be used. The factory microphone is integrated into Porsche's SOS emergency system and cannot be repurposed for CarPlay calls without compromising that functionality. Upgrade Your Porsche. Drive Smarter. Victorious Automotive brings you premium in-car technology upgrades trusted by enthusiasts worldwide. Rated 4.9/5 stars from over 12,300 verified reviews — and backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx / UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All manufacturer names, model designations, and trademarks are used solely for fitment reference purposes. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC.

Victorious Automotive · Porsche PCM3.1 · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche PCM3.1 — Cayenne, Macan, Panamera, 911 & More (2010–2016) Bring full wireless Apple CarPlay, Android Auto, and mirror-linking to your Porsche PCM3.1 system — plug-and-play fitment with no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Cayenne Macan Panamera 911 / 991 Boxster / 718 Cayman Plug & Play Siri Voice Control Overview Porsche's PCM3.1 infotainment system was an engineering benchmark when it launched, but a decade on, the absence of Apple CarPlay leaves it feeling dated against modern expectations. Navigation has moved on, streaming is standard, and seamless iPhone integration is now something drivers rightly expect from a car of this calibre. This Wireless Apple CarPlay Adapter is engineered specifically for Porsche PCM3.1-equipped vehicles built between 2010 and 2016. It slots cleanly behind the factory head unit and communicates via the existing CAN-Bus interface, meaning your original display, steering wheel controls, and physical buttons all continue to function exactly as Porsche intended — you simply gain a significant layer of modern connectivity on top. Whether you're connecting wirelessly over Bluetooth for CarPlay, mirroring your Android device, or connecting a front or reverse camera, this adapter handles it all without voiding the original system or leaving visible traces of the installation. It's the upgrade Porsche should have offered from the factory. What's Included 📦 CarPlay Adapter Module PCM3.1-specific hardware unit 🔌 CAN-Bus Harness Plug-and-play wiring loom 🎙️ External Microphone Replaces SOS-integrated OEM mic 📡 Bluetooth Antenna For wireless iPhone pairing 🔧 Installation Hardware Screws and mounting brackets 📄 Installation Guide Step-by-step instruction manual Product Highlights Wireless Apple CarPlay — connect your iPhone automatically without a cable Wired Apple CarPlay also supported via USB for added reliability Full Android Auto compatibility for Google Maps, Waze and more Android screen mirroring for multimedia and app streaming Original steering wheel controls fully retained and functional CAN-Bus integration preserves all factory PCM3.1 features Supports front and reverse aftermarket cameras Siri voice control for safe, hands-free iPhone interaction Hands-free calling with the included dedicated microphone USB flash drive playback for offline video and music libraries Compatibility Model Year Range System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit PCM3.1 with CD-AUX button Any PCM3.1 variant Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes Confirm your PCM3.1 unit has a NAVI button on the control panel — this is required for activation. Units with only a CD-AUX button are not supported. Remove the factory head unit trim and carefully extract the PCM3.1 module to access the rear connectors. Connect the supplied CAN-Bus harness between the adapter module and the existing PCM3.1 wiring plugs. Route and secure the included external microphone to your preferred location on the A-pillar or overhead console. If your vehicle is equipped with Sirius Satellite Radio, contact us before installation — we will supply additional fixing screws to accommodate the alternate mounting arrangement. Reassemble the trim, power on the vehicle and follow the on-screen pairing prompt to connect your iPhone via Bluetooth. Important: The included external microphone must be used in place of the factory microphone. The original OEM microphone is integrated with the vehicle's SOS emergency system and cannot be shared with the CarPlay adapter. The supplied microphone replicates all hands-free calling functions independently. Upgrade Your Porsche Today Join over 12,300 satisfied owners who've transformed their driving experience with Victorious Automotive. Questions before you buy? Call our specialists on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS 🔁 30-day money-back guarantee 📞 Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used solely for fitment identification purposes. PCM is a registered trademark of Porsche AG.

Victorious Automotive · Range Rover Sport L320 & Discovery 4 L319 · Infotainment Apple CarPlay & Android Auto Head Unit — Range Rover Sport L320 & Discovery 4 L319 (2010–2016) A direct-fit Android multimedia unit bringing wireless CarPlay, Android Auto, built-in GPS navigation, and Hi-Fi audio to your Range Rover Sport or Discovery 4 — without altering the factory fascia. Range Rover Sport L320 Discovery 4 L319 / LR4 Apple CarPlay Android Auto 2010–2016 Double DIN 7" Touchscreen Android OS Built-in GPS Bluetooth Wi-Fi CAN-Bus Steering Wheel Control Overview The Range Rover Sport L320 and Discovery 4 L319 are two of Land Rover's most enduring platforms — purposeful, capable, and deeply characterful. But their factory infotainment systems, competent for their era, were never designed for a world of wireless smartphone integration, streaming audio, or real-time navigation. If you spend meaningful time behind the wheel, the cabin technology inevitably becomes the weak link in an otherwise excellent driving experience. This purpose-built double-DIN multimedia unit slots directly into the factory head unit position of both the L320 and L319, delivering a 7-inch 1024×600 capacitive touchscreen with Apple CarPlay and Android Auto as standard. Running on Android with 2GB RAM and 32GB ROM, it handles GPS navigation, Bluetooth audio, Wi-Fi streaming, FM radio, DVD/CD playback, and full multimedia formats — all within an interface that mirrors the layout your dashboard was designed around. CAN-Bus integration ensures the unit communicates natively with your vehicle's electronics, preserving steering wheel audio controls and maintaining a seamless factory feel. This isn't a generic aftermarket screen forced into place — it's a considered upgrade engineered specifically for these two Land Rover platforms. What's Included 🖥️ Head Unit 7" Android multimedia unit, double-DIN 🔌 Vehicle Wiring Harness Plug-and-play connector for L320 / L319 📡 GPS Antenna External antenna for reliable positioning 🎙️ External Microphone For hands-free calling clarity 📻 Radio Antenna Adapter Maintains factory FM/AM signal quality 🔧 Fitting Hardware Brackets and fixings for secure installation Product Highlights Apple CarPlay integration for seamless iPhone connectivity Android Auto support for Google Maps, Waze & more 7-inch capacitive touchscreen at 1024×600 resolution Android OS with 2GB RAM and 32GB internal storage Built-in GPS navigation with multi-language support Bluetooth audio streaming and hands-free calling Wi-Fi connectivity for app updates and streaming CAN-Bus support preserving steering wheel controls FM transmitter, radio tuner, and DVD/CD playback Multi-format support: MP3, MP4, WMA, JPEG and more Compatibility Vehicle Code Year Range Fit Range Rover Sport L320 2010–2013 Direct Fit Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Discovery 5 L462 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 1.5–3 Hours Disconnect the vehicle battery and allow the electrical system to discharge for at least 10 minutes before beginning work. Remove the factory centre console trim panels using appropriate trim removal tools to avoid scratching the surrounding fascia. Extract the original head unit by releasing the retaining clips or bolts — refer to your specific model's workshop manual for torque specifications. Connect the supplied vehicle-specific wiring harness to the new unit, matching colour-coded connectors. Attach the GPS antenna to a clear line-of-sight position on the dashboard. Route the external microphone to a discreet position near the driver's sun visor or A-pillar for optimal call quality. Slot the new head unit into the DIN cage, secure with the provided hardware, and reattach all trim panels. Reconnect the battery, power on the unit, and follow the on-screen setup wizard to configure language, GPS region, and CarPlay/Android Auto pairing. Verify steering wheel control functions via the CAN-Bus settings menu and calibrate if required. Important: This unit is slightly larger than the original factory head unit. Ensure adequate clearance behind the dashboard before final fitment. Professional installation is recommended if you are unfamiliar with automotive wiring or trim removal on Land Rover vehicles. Upgrade Your Cabin. Keep Your Character. Trusted by over 12,300 Land Rover and Range Rover owners worldwide, Victorious Automotive exists to help you get more from every drive — without compromise. Shop Range Rover Sport Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes.

Tesla · Model 3 · Interior Trim Rear Seat Cup Slot Decorative Cover for Tesla Model 3 2017–2020 Refined carbon fiber styling for your Model 3's rear interior—premium ABS construction, factory-fit precision. Model 3 2017–2020 ABS Plastic Carbon Fiber Interior Trim Overview The Tesla Model 3 (2017–2020) deserves interior details that match its refined engineering. This rear seat cup slot decorative cover brings a touch of sophisticated styling to an often-overlooked area of your cabin—a subtle upgrade that elevates the entire interior aesthetic. Crafted from durable ABS plastic with a carbon fiber-style finish, this cover seamlessly replaces your factory cup holder slot cover with a sleeker, more contemporary look. Installation requires no tools or permanent modifications, making it an ideal accessory for owners who want premium detailing without complexity. Whether you're personalising your Model 3 for daily driving or preparing it for display, this decorative cover delivers factory-quality fitment and lasting durability. It's the kind of detail-focused upgrade that discerning owners appreciate. What's Included 🎨 Decorative Cover 1x carbon fiber rear cup slot cover 📋 Installation Guide Quick reference for fitment Product Highlights Carbon fiber-style finish for modern, premium appearance Direct fit—no modification required for Model 3 2017–2020 Premium ABS plastic construction resists fading and wear Tool-free installation in under five minutes Factory-quality fitment and sealing Enhances cabin refinement and visual cohesion Lightweight and impact-resistant material Colour-matched to original Tesla interior trim Compatible with all Model 3 configurations 2017–2020 Backed by quality assurance and 30-day guarantee Compatibility Model / Year Range Compatibility Tesla Model 3 (2017–2020) Direct Fit Tesla Model 3 (2021+) Not Compatible Model Y, S, X Not Compatible Before purchase: Verify your vehicle's model year (check door jamb plate or Tesla app). This cover is engineered exclusively for the 2017–2020 Model 3 generation. Installation Difficulty Level: Beginner | Time: 5 minutes Open rear doors and locate the cup holder slot cover in the centre armrest area. Gently lift and remove the existing factory cover by hand or with gentle prying. Clean the interior surface with a soft, dry cloth to remove dust or debris. Align the new decorative cover with the cup slot opening, ensuring tabs or clips match the receptacle. Press firmly until you hear or feel a click—cover should sit flush with surrounding trim. Close doors and inspect from multiple angles to confirm even fitment. Note: Do not force the cover into position. If resistance is felt, remove and recheck alignment. Forcing may damage the clip mechanism or trim. Elevate Your Model 3 Today Premium interior detailing that respects your vehicle's design and engineering. Factory-quality fitment, tool-free installation, and backed by our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Guarantee ✓ Worldwide Shipping ✓ 4.9/5 Stars – 12,300+ Reviews ✓ Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory supplier. We are not affiliated with, endorsed by, or connected to Tesla, Inc. or any official Tesla subsidiary. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility and personalisation only.

Victorious Automotive · Defender L663 · Exterior Trim 4-Piece Stainless Steel Window Trim Set for Land Rover Defender 110 & 130 L663 (2020+) A precision-cut polished stainless steel window surround upgrade that refines the Defender's bold exterior with a clean, contemporary finish — no tools, no fuss. Defender L663 2020–2026 Stainless Steel Polished Silver 4-Piece Set Peel & Stick Corrosion Resistant Exterior Trim Overview The Land Rover Defender L663 is a vehicle that commands presence — an icon reborn with modern proportions, purposeful surfaces, and a design language that rewards the details. Whether you're running a 110 or a 130, the window line is one of the most defining visual elements of the body, and it's exactly where considered upgrades make the most impact. This 4-piece stainless steel window trim set is designed to slot directly into the window surround of the Defender 110 and 130 (2020 onwards), delivering a flush polished silver accent that bridges the gap between the Defender's utilitarian roots and its increasingly premium positioning. The trims are cut to mirror the exact geometry of the window apertures, sitting flat and seamlessly against the bodywork without gaps or misalignment. Constructed from high-grade stainless steel and finished with a mirror-polished surface, these trims offer genuine corrosion resistance alongside visual refinement — a combination that matters on a vehicle built to be driven in all conditions. Installation is handled via automotive-grade adhesive backing, requiring no drilling, no clips, and no professional tools. Clean the surface, align, press, and the job is done. What's Included 🪟 Window Trim Cover × 4 Polished stainless steel, adhesive-backed, pre-cut to fit 🔲 Adhesive Pre-Applied Automotive-grade 3M-style tape — ready to install out of the box 📋 Installation Guide Step-by-step instructions included for a clean application Product Highlights Precision-cut to match the Defender 110 & 130 L663 window profile exactly High-grade stainless steel construction — resistant to rust, oxidation and UV fade Mirror-polished silver finish elevates the exterior without altering the Defender's character Peel-and-stick installation — no tools, no drilling, no damage to bodywork Automotive-grade adhesive ensures a lasting, secure bond in all weather conditions Undergoes factory-level quality control testing before dispatch Flush fitment sits seamlessly against the window surround with no visible gaps Suitable for both daily drivers and Defenders kept to show standard Compatible with standard factory window trim on 2020-onwards Defender variants Lightweight design adds zero meaningful weight while delivering maximum visual impact Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Defender (Classic / Pre-2020) — Pre-2020 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Tools Required: None Thoroughly clean the window surround area using an isopropyl alcohol wipe or panel wipe solution. Remove all wax, grease, and residue. Allow to dry completely before proceeding. Dry-fit each trim piece to the window surround without removing the adhesive backing. Confirm alignment and note the exact positioning — take your time here to ensure a level, flush result. If ambient temperature is below 15°C, gently warm the adhesive backing and the panel surface with a heat gun or hair dryer. This significantly improves initial bond strength. Peel the adhesive backing from the first trim piece. Starting from one end, carefully align and press the trim against the window surround, working progressively to avoid air bubbles or misalignment. Apply firm, even pressure along the full length of the trim for a minimum of 60 seconds to activate the adhesive bond. Repeat for all four pieces. Allow the adhesive to cure fully for at least 24 hours before exposing the vehicle to rain, a car wash, or extreme temperatures. ⚠ Note: Ensure panel surfaces are completely dry and free of contaminants before application. Attempting to fit on a wet or waxed surface will significantly reduce adhesion. Professional installation is recommended if you are unsure about panel preparation. Complete Your Defender's Exterior These window trims are just the beginning. Explore the full Victorious range of exterior upgrades designed specifically for the Defender L663 — from door handle covers to bonnet trim and beyond. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and designations are used solely for fitment reference purposes. Compatibility is based on standard factory specification — vehicles with non-standard or modified window trim may require additional assessment prior to fitting.

Victorious Automotive · Range Rover Evoque L551 · Exterior Trim ABS Plastic Door Side Body Molding Cover Trim for Range Rover Evoque L551 (2019–2020) A precision-fit body side molding upgrade that sharpens the Evoque L551's exterior lines while shielding your doors from everyday scuffs and kerb strikes. Evoque L551 2019–2020 ABS Plastic Piano Black Silver Carbon Fibre Rose Gold Exterior Trim Tool-Free Fit 3M Adhesive Overview The second-generation Range Rover Evoque L551 arrived in 2019 as one of the most refined and design-forward compact SUVs in Land Rover's history. Its sculpted body, flush surfaces, and distinctive silhouette reward owners who pay attention to the details — which is exactly where these door side body molding cover trims come in. Engineered specifically for the 2019–2020 Evoque L551, these molding trims wrap the lower door edges in high-grade ABS plastic, delivering a factory-integrated appearance that protects the most vulnerable painted surfaces on your vehicle. Whether it's car park door dings, road debris, or general wear, these trims act as a first line of defence while simultaneously elevating the exterior aesthetic with clean, purposeful lines. Available in four distinct finishes — Piano Black, Silver, Carbon Fibre, and Rose Gold — there's an option to complement every Evoque specification, from the understated SE to the more expressive R-Dynamic variants. Each trim is produced under strict quality control to ensure consistent panel alignment, finish quality, and adhesive performance straight out of the box. What's Included 🚪 Full Door Trim Set Complete set covering all door panels for the L551 body 🔲 Pre-Applied 3M Adhesive Industrial-grade tape bonded to each trim piece at factory 📋 Installation Guide Step-by-step reference for clean, accurate fitment ✅ QC-Passed Components Each piece inspected before dispatch for finish and fit Product Highlights Precision-engineered exclusively for the Range Rover Evoque L551 2019–2020 body High-grade ABS plastic construction for lasting durability in all climates Four finish options: Piano Black, Silver, Carbon Fibre, Rose Gold Pre-applied industrial 3M adhesive backing for secure, tool-free installation Protects lower door panels from scuffs, kerb strikes, and road debris Slim, low-profile design that complements the Evoque's factory body lines UV-resistant surface coating to prevent fading and discolouration over time Strict factory quality control — each unit inspected before shipping 100% brand new — never refurbished or repackaged No drilling, cutting, or specialist tools required for installation Compatibility Model Code Year Range Fitment Range Rover Evoque (2nd Gen) L551 2019–2020 Direct Fit Range Rover Evoque (1st Gen) L538 2011–2018 Not Compatible Range Rover Evoque (2nd Gen Facelift) L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔧 Tools Required: None Thoroughly clean the installation area on each door panel using an isopropyl alcohol wipe, removing all wax, grease, and dust. Allow to dry completely before proceeding. Warm the pre-applied 3M adhesive strip on the reverse of each trim piece using a heat gun or hairdryer on a low setting for 15–20 seconds. This activates the adhesive for maximum bond strength, particularly important in cooler temperatures. Dry-fit each trim piece against the door panel without removing the adhesive backing. Confirm the alignment and profile match before committing to placement. Peel back the adhesive liner carefully and position the trim piece against the door, starting at one end and working progressively to avoid air pockets or misalignment. Apply firm, even pressure along the full length of each trim for at least 30 seconds to ensure full adhesive contact with the door surface. Allow a minimum of 24 hours before exposing the vehicle to water or washing. This curing period ensures a permanent, weather-resistant bond. ⚠ Important: Do not apply in direct sunlight or when panel surface temperature exceeds 40°C, as this can affect adhesive positioning. If you are uncertain about the installation process, professional fitting is recommended to ensure optimal results and preserve your vehicle's finish. Upgrade Your Evoque. The Right Way. At Victorious Automotive, every product we carry is selected with one standard in mind — worthy of a Range Rover. Explore our full collection of Evoque L551 exterior accessories and find everything your vehicle deserves. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, authorised by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used solely for the purpose of product compatibility identification and remain the intellectual property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim ABS Chrome Dashboard Centre Control Panel Cover Trim for Range Rover Evoque L551 (2020+) A precision-fit centre console trim piece that elevates the Evoque L551 interior with a polished chrome or carbon fibre aesthetic — no tools, no guesswork, no compromise. Evoque L551 2020–2024 ABS Chrome Carbon Fibre Finish Silver Finish Tool-Free Fit 3M Adhesive Interior Upgrade Direct Fit Overview The Range Rover Evoque L551 represents Land Rover's most urban, design-led proposition — a compact SUV built for those who refuse to sacrifice style for substance. Its interior is already a strong statement, but for owners who want every surface to reflect their attention to detail, the centre console area often remains an opportunity left unrealised. That changes here. This ABS Chrome Dashboard Centre Control Panel Cover Trim is engineered specifically for the 2020-onwards Evoque L551. Each piece is formed from high-grade ABS substrate with a chrome or carbon fibre surface finish, contoured to match the exact geometry of your centre control panel. The result is a seamless, factory-adjacent look that feels considered rather than aftermarket. Available in classic Silver Chrome or Carbon Fibre finish, this trim allows you to tailor the cabin aesthetic to your personal preference — whether you're drawn to the cool sophistication of chrome or the sporting edge of carbon. Installation is entirely adhesive-based using 3M bonding tape, meaning no drilling, no modifications, and no risk to your vehicle's original surfaces. What's Included 🪄 Centre Control Panel Trim 1 × ABS chrome panel, pre-cut to Evoque L551 spec 🔲 3M Adhesive Pre-Applied Factory-applied bonding tape on reverse face 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Engineered exclusively for the Range Rover Evoque L551 (2020 onwards) Premium ABS substrate with durable chrome or carbon fibre surface finish Available in Silver Chrome and Carbon Fibre colourways Pre-applied 3M automotive-grade adhesive for a clean, tool-free install Passes strict factory-level QC testing before despatch Contoured to precisely match OEM panel geometry — no gaps, no flex Does not interfere with any controls, vents, or electronic components Resistant to UV fading, heat distortion, and everyday interior wear Fully reversible — can be removed without damaging original trim Despatched worldwide via DHL, FedEx, UPS, and TNT Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 – 2024 Direct Fit Range Rover Evoque (1st Gen) L538 2011 – 2018 Not Compatible Range Rover Velar L560 2018 – 2023 Not Compatible Discovery Sport L550 2020 – 2024 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 Minutes  |  🔧 Tools Required: None Thoroughly clean the centre control panel surface with an isopropyl alcohol wipe and allow to dry completely — any residue or moisture will compromise adhesion. Hold the trim piece against the installation area without removing the adhesive backing. Confirm the fit, alignment, and orientation before committing. Using a heat gun or hair dryer, gently warm the 3M adhesive backing on the trim piece for 20–30 seconds. This activates the adhesive and significantly improves bond strength. Carefully peel the adhesive backing, align the trim precisely with the panel edges, and press firmly into position starting from the centre outward. Apply firm, even pressure across the entire surface for 60 seconds. Avoid disturbing the trim for at least one hour to allow full adhesive cure. ⚠ Important: Ensure the installation surface is clean, dry, and at room temperature before fitting. Do not install in cold or damp conditions as this will reduce adhesive performance. If in doubt, professional installation is recommended. Upgrade Your Evoque Interior Today Thousands of Range Rover owners trust Victorious Automotive for interior upgrades that look and feel like they belong. Join them — and make the most of your Evoque L551's cabin. Shop More Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Exterior Trim 4-Piece Black Front Fog Lamp Frame Trim Set — Range Rover Evoque L551 (2019–2020) A precision-cut set of four ABS fog lamp surround trims engineered to sharpen the front-end aesthetic of the second-generation Evoque with a bold, piano black finish and a tool-free fitment. Evoque L551 2019–2020 4-Piece Set Piano Black ABS Rose Gold Available Tool-Free Install 3M Adhesive Exterior Trim Overview The second-generation Range Rover Evoque (L551) arrived in 2019 as one of Land Rover's most design-forward compact SUVs — sleek flush surfaces, flush door handles, and a front end that rewards attention to detail. It's a vehicle that responds exceptionally well to subtle exterior refinements, and the fog lamp surrounds are one of the most visible yet often overlooked areas on the front fascia. This 4-piece front fog lamp frame trim set has been developed specifically for the L551 platform, designed to sit flush within the existing fog lamp apertures and elevate the overall front-end appearance. Finished in a deep piano black, the trims introduce a level of visual cohesion and intent that the standard unpainted surrounds simply don't deliver. A rose gold variant is also available for owners looking to introduce a contrasting accent tone. Manufactured from high-grade ABS plastic and backed by pre-applied 3M adhesive, these trims require no drilling, no cutting, and no specialist tools. Each piece is produced to tight dimensional tolerances and subjected to factory quality control testing before despatch — so what arrives at your door fits precisely and holds firmly from day one. What's Included 🔲 Front Fog Lamp Frame Trim ×4 Full set of four surrounds for both left and right fog lamp housings 🔧 Pre-Applied 3M Adhesive Factory-applied backing tape on each trim for immediate fitment 📄 Installation Guidance Step-by-step fitting instructions included in packaging Product Highlights Designed exclusively for the Range Rover Evoque L551 (2019–2020) front fascia High-grade ABS plastic construction — resistant to UV, heat, and road debris Deep piano black finish for a refined, cohesive front-end appearance Rose gold colour option available for a distinctive contrasting accent Pre-applied 3M adhesive backing ensures a strong, lasting bond Tool-free installation — no drilling, cutting, or professional fitting required 100% brand new and factory QC-tested before despatch Precision-cut to match the exact fog lamp aperture dimensions of the L551 Protects fog lamp surround edges from minor chips and kerb debris Compatible with both standard and R-Dynamic front bumper trim levels Compatibility Model Code Year Range Compatibility Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L551 2021–2024 Verify Before Purchase Range Rover Evoque (1st Gen) L538 2011–2018 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Discovery Sport L550 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park the vehicle on a flat surface and ensure the front bumper area is cool to the touch before beginning. Thoroughly clean the fog lamp surround areas with an isopropyl alcohol-based surface prep wipe and allow to dry completely — any residual wax, grease, or moisture will reduce adhesive bond strength. Dry-fit each trim piece into position without removing the adhesive backing to confirm alignment and seating before final application. Peel the 3M adhesive liner from the first trim, carefully align with the fog lamp aperture, and press firmly into place for a minimum of 60 seconds per piece. Repeat for all four trims, working methodically from one side to the other. Allow a minimum of 24 hours before washing the vehicle to allow the adhesive to fully cure and bond. ⚠ Cold Weather Note: If installing in temperatures below 10°C, gently warm the 3M adhesive backing with a heat gun or hair dryer on a low setting for 10–15 seconds before application. This significantly improves initial tack and long-term bond strength. Professional installation is always recommended for the best result. Elevate Your Evoque's Front End Small details define the difference between stock and considered. These fog lamp trims are a straightforward upgrade that reads well at every angle — and ships worldwide from Victorious Automotive, the UK's premium Land Rover accessory specialist. Shop All Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle specification before purchasing.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Aluminum Alloy Air Conditioning & Volume Knob Ring Trim — Range Rover Evoque L551 & RR Velar (Set of 3) Elevate the tactile quality of your Evoque or Velar's centre console with precision-machined rose gold aluminium knob rings — a direct-fit upgrade that replaces the factory plastic finish in minutes. Evoque L551 RR Velar 2017–2019 2019–2020 Aluminum Alloy Rose Gold Set of 3 No Tools Required Interior Trim 3M Adhesive Overview The Range Rover Evoque L551 and Range Rover Velar are celebrated for their avant-garde interiors — clean, minimal, and unmistakably modern. Yet from the factory, the central console knobs retain a plastic surround that, over time, can feel at odds with the premium experience these vehicles are designed to deliver. For owners who demand consistency across every surface they touch, that's a detail worth addressing. This set of three knob ring trims is machined from high-grade aluminum alloy and finished in a warm rose gold tone, designed to overlay the air conditioning and volume control knobs in the centre console. The result is an immediate visual and tactile upgrade — a cool-to-the-touch metallic feel that aligns far more naturally with the Evoque and Velar's interior design language. Each ring is precision-cut to match the exact diameter and profile of the factory controls, fitting flush without obstructing function. Pre-applied 3M adhesive backing means installation is clean, permanent, and entirely reversible if needed — no drilling, no cutting, no professional labour required. What's Included 🎛️ AC Knob Ring Trim ×2 Left & right air conditioning control rings, rose gold aluminium 🔊 Volume Knob Ring Trim ×1 Central media volume control ring, matching rose gold finish 🔧 Pre-Applied 3M Adhesive Factory-grade bonding tape on each ring — no tools required 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-machined from high-grade aluminum alloy for a genuine metal feel Rose gold finish adds warmth and contrast to the Evoque and Velar interior palette Set of three covers AC (×2) and volume (×1) knobs in the centre console Pre-applied 3M adhesive — clean fit, no residue, no tools required Direct overlay design — does not affect knob operation or functionality Strict factory QC inspection on every unit before dispatch 100% brand new — not refurbished, not pre-owned Compatible with both Range Rover Evoque L551 (2019–2020) and RR Velar (2017–2019) Lightweight construction — no added weight or stress to controls Reversible installation — can be removed cleanly without damaging the original knobs Compatibility Model Code Year Range Fit Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Velar L560 2017–2019 Direct Fit Range Rover Evoque L538 (Pre-2019) 2011–2018 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🛠 Difficulty: Beginner Thoroughly clean and dry the surface of each knob to remove any dust, oils, or residue. A microfibre cloth and isopropyl alcohol are ideal. Dry-fit each ring against its corresponding knob to confirm alignment and positioning before committing to adhesion. Gently warm the 3M adhesive backing using a heat gun or hair dryer for 10–15 seconds — this is especially important in cooler climates to ensure a strong initial bond. Peel the adhesive backing and carefully align the ring from one edge, pressing firmly outward to avoid air pockets. Apply firm, even pressure across the full ring surface for 60–90 seconds. Allow 24 hours for the adhesive to fully cure before repeated use. ⚠ Note: If you are unsure about the installation process or working in low temperatures, we recommend visiting a professional automotive detailing or trim specialist. Attempting to force the rings without warming the adhesive may result in a weaker bond over time. Shop the Full Evoque L551 Collection Explore our complete range of interior and exterior accessories engineered specifically for the Range Rover Evoque L551 — from carbon fibre trim to illuminated sill plates and beyond. Browse Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Black Wood Grain Window Lift Switch Button Frame Cover Trim — Range Rover Evoque L551 (2020) LHD Elevate your Evoque's door panel aesthetic with a precision-fit black wood grain ABS frame cover that slots cleanly over the window lift switch buttons — no drilling, no mess, no compromise. Evoque L551 2020 Left Hand Drive ABS Plastic Black Wood Grain Window Switch Trim Tool-Free Fit Interior Upgrade Overview The Range Rover Evoque L551 is one of Land Rover's most style-conscious compact SUVs — a vehicle where every interior detail matters. From the moment you close the door, your eyes fall on the door panel controls, and the factory window switch surrounds, while functional, can look uninspiring over time. If your Evoque's interior deserves a refresh that feels cohesive, purposeful, and premium, this trim piece delivers exactly that. This window lift switch button frame cover is crafted from high-quality ABS plastic finished in a sophisticated black wood grain texture. It wraps cleanly around the existing window switch cluster, masking wear, scratches, or simply updating the look of the panel to something with a little more presence. The wood grain finish strikes a balance between understated luxury and visual warmth — complementing the Evoque's interior colour palette without overpowering it. Designed specifically for left-hand-drive 2020 Range Rover Evoque models, fitment is deliberate and precise. The cover attaches via a pre-applied 3M adhesive backing, requiring no tools and no modification to your door card. It is an upgrade that takes minutes but reads as something far more considered — the kind of detail Evoque owners appreciate. What's Included 🪵 Window Switch Frame Cover Black wood grain ABS trim piece — qty 1 🔲 Pre-Applied 3M Adhesive Factory-applied to reverse face for clean bonding 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for the 2020 Range Rover Evoque L551 LHD door panel Black wood grain finish adds a refined, premium cabin aesthetic High-quality ABS plastic — durable, lightweight, and heat-resistant Pre-applied 3M adhesive backing for a secure, lasting bond Tool-free installation — no drilling or modification required Strict factory QC testing ensures consistent quality on every unit Covers wear, scratches, or ageing on the original switch surround Complements other wood grain interior trim upgrades for a unified look 100% brand new — not a refurbished or reconditioned part Specifically designed for left-hand-drive configurations only Compatibility Model Generation / Code Year Range Drive Fitment Range Rover Evoque L551 (2nd Gen) 2020 Left Hand Drive Direct Fit Range Rover Evoque L551 (2nd Gen) 2019 / 2021–2024 Left Hand Drive Verify Before Purchase Range Rover Evoque L551 (2nd Gen) 2020 Right Hand Drive Not Compatible Range Rover Evoque L538 (1st Gen) 2011–2018 Any Not Compatible Range Rover Velar L560 Any Any Not Compatible Defender L663 Any Any Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 minutes  ·  Tools Required: None Ensure the door panel surface around the window switch cluster is thoroughly clean and completely dry before beginning. Remove any dust, grease, or residue with an isopropyl alcohol wipe for best adhesion. Dry-fit the cover trim against the switch panel to confirm alignment and locate the optimal positioning before committing to the bond. Gently warm the pre-applied 3M adhesive on the reverse face using a heat gun or hairdryer for 15–20 seconds. This activates the adhesive and is especially important in colder climates or lower ambient temperatures. Peel the adhesive backing film and carefully align the trim piece over the switch frame, starting from one side and pressing down gradually to avoid air pockets. Apply firm, even pressure across the entire surface for at least 60 seconds to ensure full contact and a lasting bond. Allow to set for a minimum of 24 hours before subjecting to heavy use. ⚠ Important: This trim is designed for left-hand-drive vehicles only. Do not attempt to fit on a right-hand-drive Evoque — panel geometry differs and the cover will not sit correctly. If in doubt, we recommend visiting a professional automotive detailing or trim specialist for installation. Upgrade Your Evoque's Interior Today Small details define a truly well-finished cabin. Browse the full Victorious range of Range Rover Evoque interior accessories and discover more ways to personalise your L551. Shop More Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Exterior Trim Range Rover Evoque (L551) Hood Air Vent Outlet Wing Trim Stickers — ABS Plastic, 2019–2020 Precision-fitted hood vent trim stickers for the L551 Evoque — a simple, tool-free upgrade that sharpens the exterior detail with a factory-quality finish. Evoque L551 2019–2020 ABS Plastic Silver Piano Black Rose Gold Tool-Free Fit 3M Adhesive Exterior Trim Overview The second-generation Range Rover Evoque L551 brought a level of design sophistication rarely seen in the compact SUV class — flush surfacing, layered lighting, and a silhouette that feels deliberate from every angle. If you own one, you already know that the details matter. The hood vent outlets are a signature design element, and these trim stickers are engineered to complement them perfectly without altering the factory aesthetic. Manufactured from high-grade ABS plastic, these hood air vent outlet wing trim stickers are designed as a direct overlay for the 2019–2020 L551 Evoque. Available in Silver, Piano Black, and Rose Gold, each finish is carefully selected to align with the Evoque's existing colour palette — whether your vehicle wears a contrasting roof, gloss black pack, or a Narvik-inspired dark theme. The trim pieces arrive pre-fitted with 3M adhesive backing, meaning no drilling, no modifications, and no professional tools required. These stickers do more than add colour — they add definition. By framing the hood vent outlets with a clean, uniform surround, they tighten the visual cohesion of the bonnet area and give the front end a more purposeful, finished appearance. For Evoque owners who take pride in keeping every detail sharp, this is one of the most rewarding exterior upgrades available at this price point. What's Included 🔲 Hood Vent Trim Sticker Set Full set of ABS plastic vent outlet wing trims for the L551 Evoque 🔧 Pre-Applied 3M Adhesive Heat-activated backing for strong, lasting adhesion 📋 Installation Guide Step-by-step application instructions included Product Highlights 100% brand new, manufactured to strict quality control standards High-grade ABS plastic — durable, UV-resistant, and lightweight Available in three finishes: Silver, Piano Black, and Rose Gold Pre-applied 3M adhesive backing for secure, long-lasting fitment Tool-free installation — no drilling or professional fitting required Precision-cut to match the L551 Evoque hood vent outlet geometry Enhances the front exterior with a cleaner, more defined visual finish Resistant to temperature fluctuations, vibration, and road conditions Non-invasive fitment — fully reversible with no damage to paintwork Complements factory trim levels and aftermarket styling packages Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 (Mk1) 2011–2018 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: None Thoroughly clean the hood vent outlet area using an alcohol-based surface cleaner to remove any grease, wax, dust, or moisture. Allow to dry completely before proceeding. If fitting in cold ambient temperatures (below 10°C / 50°F), gently warm the 3M adhesive backing on each trim piece using a heat gun or hair dryer for 10–15 seconds. This activates the adhesive and significantly improves initial bond strength. Dry-fit each trim piece against the vent outlet to confirm positioning and alignment before removing the adhesive backing. Take note of any subtle curves or edges that require careful placement. Peel the protective film from the 3M adhesive and carefully align the trim piece against the vent outlet. Press firmly along the full length of the piece, applying even pressure from the centre outward to avoid air pockets. Hold each piece in place for 30–60 seconds after initial application. For optimal bond strength, avoid washing the vehicle or exposing the trim to heavy rain for at least 24 hours after fitting. ⚠ Note: Ensure the bonnet surface is completely dry and free from wax or polish residue before application — any contamination will reduce adhesive performance. If you are unsure at any stage, professional installation is recommended to ensure a flawless finish. Upgrade Your Evoque. Elevate Every Detail. At Victorious Automotive, we source accessories that meet the standard your Range Rover deserves. Every product is backed by our 30-day money-back guarantee and shipped worldwide via DHL, FedEx, UPS, and TNT. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender 110 · Interior Matte Chrome Aluminum Alloy Grab Handles for Land Rover Defender 110 Premium interior grab handles designed to enhance accessibility and provide confident grip through rough terrain. L663 2020–2026 Aluminum Alloy Matte Chrome Pair (2pcs) Interior Trim Overview The Defender 110 has become the benchmark for capable family exploration—but transitioning in and out of that elevated driving position demands practical support. These matte chrome aluminum alloy grab handles address that need with understated elegance. Engineered from aircraft-grade aluminum and finished in contemporary matte chrome, this pair installs seamlessly into your Defender's interior architecture. Beyond convenience, they serve as essential safety equipment when navigating technical terrain, delivering tactile feedback and stable hand placement through dynamic driving conditions. Whether it's daily entry and exit, family adventures, or genuine off-road work, these handles combine functional design with the premium finish that Defender owners expect. The matte chrome aesthetic complements modern interior trim without visual heaviness. What's Included 🪝 Pair of Grab Handles 2pcs – left & right configuration ✨ Matte Chrome Finish Contemporary, non-reflective surface ⚙️ Mounting Hardware Stainless steel fixings included 📖 Installation Guide Step-by-step instructions provided Product Highlights Aerospace-grade aluminum alloy construction Matte chrome finish resists fingerprints Ergonomic grip geometry for secure hand placement Lightweight yet rigid support structure Direct fit for Defender 110 L663 (2020–2026) Seamless integration with factory trim lines Temperature-stable material composition Corrosion-resistant surface treatment Dual-position mounting flexibility Premium aesthetic that complements modern interiors Compatibility Model Generation Years Fit Defender 110 L663 2020–2026 Direct Fit Defender 90 L663 2020–2026 Not Compatible Defender 130 L663 2020–2026 Not Compatible Defender Pre-2020 Models 1990–2016 Not Compatible Installation Difficulty: Beginner · Time: 15–20 minutes Ensure interior is clean and dry. Locate mounting points on driver and passenger A-pillar trim. Remove protective backing from adhesive strips or prepare bolt holes per instructions. Align grab handle with mounting points—ensure level orientation. Apply handle firmly and hold for 10 seconds. Allow adhesive to cure per product specifications. Test grip security before full use. Verify no gaps between handle and mounting surface. Note: Some installations may require factory trim removal. If uncomfortable with interior work, consult a Defender-trained technician. Test fit before final installation. Complete Your Defender Interior Premium grab handles transform daily driving comfort and safety. Discover how purposeful design elevates every journey. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any OEM manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility information is provided in good faith based on industry standards and should be verified with your vehicle's documentation before purchase.

Victorious Automotive · Range Rover Sport · Headlamp Protection Pre-Cut Headlamp Tint Film — Range Rover Sport L494 / L461 (2010–2023) A precision-cut TPU headlamp tint engineered specifically for the Range Rover Sport — offering factory-level fit, self-healing clarity, and lasting protection against chips, scratches, and UV fade. Range Rover Sport L494 · L461 2010–2023 TPU Film Self-Healing Blackened Finish Transparent Finish Pre-Cut Scratch-Resistant Direct Fit Overview The Range Rover Sport is one of Land Rover's most visually commanding SUVs — a vehicle where every detail matters. Whether you're driving the muscular L494 generation or the more recently evolved L461 platform, the headlamps are a defining design feature, and protecting them should be a priority. Road debris, stone chips, UV degradation and everyday wear can quickly dull the optical-grade lenses that set the Sport apart on the road. This pre-cut headlamp tint film is designed from the ground up for a seamless, bubbleless fit across a wide range of Range Rover Sport model years. Manufactured from premium thermoplastic polyurethane (TPU), it conforms naturally to the curved geometry of the headlamp housing without peeling, lifting, or distorting the light output. The result is protection that's genuinely invisible — or, if you choose the Blackened finish, a subtle darkened aesthetic that elevates the Sport's already aggressive front-end stance. Available in both Transparent and Blackened finishes, this tint film suits owners who want pure protection as much as those who want a stealthier, blacked-out appearance. The self-healing TPU surface absorbs minor surface scratches with no intervention required, keeping your headlamps looking pristine for years — not months. No specialist tools required, no body shop booking needed. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels, ready to apply 🧰 Installation Tool Kit Squeegee and application aids included as gift 📋 Application Guide Step-by-step instructions for a clean finish 🛡️ Protective Backing Layer Peel-and-apply liner for controlled installation Product Highlights Premium TPU material delivers superior flexibility and optical clarity Self-healing surface technology repairs minor scratches automatically Pre-cut to exact headlamp dimensions — no trimming required Available in Transparent and Blackened finish options UV-resistant construction prevents yellowing and haze over time Scratch and chip resistant for long-term lens preservation Bubble-free adhesive layer for a seamless, professional finish Removable without adhesive residue or damage to OEM lenses Compatible with both OEM halogen and LED headlamp units DIY-friendly installation with no specialist tools or heat gun required Compatibility Vehicle Years Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 (Facelift) 2018–2022 Direct Fit Range Rover Sport L461 2022–2023 Direct Fit Range Rover L405 Vogue 2013–2017 Direct Fit Range Rover L405 Vogue (Facelift) 2018–2021 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L320 2005–2013 Verify Before Order Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Required Thoroughly clean both headlamp lenses with isopropyl alcohol and allow to dry completely — any dust, wax, or contamination will affect adhesion. Work in a warm, dust-free environment. Temperatures between 15°C and 25°C are ideal for optimal film flexibility. Carefully peel back the protective liner from the tint film and align the pre-cut panel to the headlamp edge before committing the adhesive. Begin application from the centre of the film outward, using the included squeegee to eliminate any air bubbles as you go. Press all edges firmly — pay particular attention to the corners and lower lip of the lens housing where lifting is most common. Allow 24–48 hours curing time before washing the vehicle or exposing the film to heavy moisture. ⚠ Important: Do not apply to a wet, cold, or freshly polished surface. Avoid stretching the film during application as pre-cut dimensions are precise. If repositioning is required, work quickly before the adhesive fully bonds. Built for Range Rover Owners Who Expect More At Victorious Automotive, every product we stock is chosen with one standard in mind — it has to be good enough for our own vehicles. This headlamp tint film meets that standard. Shop with confidence backed by our 30-day money-back guarantee and 4.9-star rating from over 12,300 verified customers. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx & UPS 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover & Land Rover · Exterior Protection Pre-Cut Headlight Tint Film — Range Rover, Sport, Evoque, Velar & Discovery Sport (2015–Present) Precision pre-cut TPU headlight protection film with self-healing technology — available in blackout or transparent finishes to sharpen the stance of your Range Rover without lifting a trim tool. L551 Evoque L494 Sport L405 Vogue Velar Discovery Sport 2015–Present TPU Film Self-Healing Blackout & Clear Pre-Cut No-Drill Install Exterior Protection Overview The Range Rover lineup — from the commanding L405 Vogue and L494 Sport through to the sleek Evoque L551 and Velar — shares an unmistakable design language built around sharp, purposeful lighting. The headlamps are a centrepiece of that visual signature, and keeping them looking factory-fresh against road debris, stone chips, UV fade and fine scratches is something every enthusiast should consider from day one. This pre-cut headlight tint film is engineered specifically for each model in the Land Rover family, arriving as a precisely contoured set of two pieces that hug every curve of your headlight housing with no trimming, guesswork or bubbling. Manufactured from high-grade TPU (Thermoplastic Polyurethane), the film features genuine self-healing technology — minor surface scuffs and light abrasions disappear with heat exposure, maintaining a consistently flawless finish over time. Choose the blackened finish to intensify the visual aggression of your Range Rover's front end, giving it a smoked, purposeful look that complements blacked-out grilles, dark alloys and contrast trim. Or opt for transparent if you want invisible, undetectable protection that preserves your factory aesthetic entirely. Either way, the adhesive is engineered to bond cleanly without leaving residue, and the film removes cleanly when you're ready — no damage, no ghosting. What's Included 💡 2× Pre-Cut Headlight Films One per headlamp, precision die-cut to your model 🧰 Installation Tool Kit Complimentary squeegee and applicator included 🧴 Application Solution Slip solution for bubble-free positioning 📋 Installation Guide Step-by-step instructions for a clean finish Product Highlights Pre-cut to exact headlight profiles — no trimming required on any supported model High-grade TPU construction for superior flexibility, clarity and durability Self-healing surface technology — minor scratches disappear with heat exposure Available in blackened (smoked) and transparent (clear) finishes UV-resistant formulation protects headlight lenses from yellowing and fading Hydrophobic outer surface repels water, road grime and insect residue Residue-free removal — leaves no adhesive ghosting on factory lenses Peel-and-stick application — no professional fitting or heat gun required Maintains full headlight output — no visible light reduction on clear variant Compatible across eight Range Rover and Land Rover model variants Compatibility Vehicle Years Fitment Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Vogue (L405) 2018–Present Direct Fit Range Rover Sport (L494) 2014–2017 Direct Fit Range Rover Sport (L494) 2018–Present Direct Fit Range Rover Evoque (L538) 2015–2019 Direct Fit Range Rover Evoque (L551) 2020–Present Direct Fit Range Rover Velar 2017–2020 Direct Fit Discovery Sport (L550) 2016–Present Direct Fit Range Rover Sport (L461) 2022–Present Verify Before Purchase Range Rover Vogue (L460) 2022–Present Verify Before Purchase Defender (L663) 2020–Present Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 30–45 Minutes Clean thoroughly. Wash and degrease the headlight surface completely. Any dust, wax residue or moisture beneath the film will cause lifting. Use isopropyl alcohol for a final wipe-down. Prepare your workspace. Work in a warm, dust-free environment. Cold ambient temperatures reduce adhesive performance and film flexibility. A garage or indoor setting is ideal. Mist the headlight surface with the included slip solution. This allows you to reposition the film before committing to the final placement. Peel and align. Carefully peel the backing from the film and position it over the headlight. Use the pre-cut edges as reference points to align correctly with the housing outline. Squeegee from centre outward. Using the included applicator, work from the centre of the film toward the edges to push out any air or solution trapped beneath. Allow to cure. Leave undisturbed for a minimum of 24 hours before driving. Avoid high-pressure washing for 48 hours post-installation. ⚠ Please Note: Always confirm your exact model year and headlight housing shape before applying. Minor facelift changes within a generation can affect fitment. If unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Protect the Detail. Keep the Stance. Your Range Rover's headlamps define its front-end presence. This pre-cut TPU film keeps them protected, sharp and exactly as they should look — for every mile ahead. Shop Range Rover Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by or connected to Land Rover, Jaguar Land Rover (JLR) or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for compatibility identification purposes and remain the intellectual property of their respective owners.

Victorious Automotive · Range Rover L405 · Exterior Protection Pre-Cut Headlamp Tint Kit for Range Rover L405 (2013–2017) Precision-cut TPU headlamp protection film that shields your lights from scratches and road debris while adding a refined, purposeful aesthetic to your Range Rover's front end. Range Rover L405 2013–2017 Self-Healing TPU Blackened & Transparent Pre-Cut Scratch-Resistant Direct Fit Exterior Protection Overview The Range Rover L405 — produced between 2013 and 2017 — is a vehicle that commands presence. Its sweeping headlamp clusters are one of the most defining visual elements of the L405's front fascia, and keeping them in pristine condition matters both aesthetically and practically. Road debris, stone chips, and environmental grime accumulate quickly on exposed headlamp surfaces, dulling the clarity and finish that makes this generation of Range Rover so distinctly polished. This Pre-Cut Headlamp Tint Kit is engineered specifically for the L405's headlamp profile, meaning no trimming, no guesswork, and no compromise. The film is manufactured from premium TPU — a thermoplastic polyurethane material widely trusted in automotive paint protection applications — and is available in two finishes: a clean transparent option that prioritises invisible protection, and a blackened tone for owners who want a more aggressive, blacked-out aesthetic to complement dark trims, gloss black grilles, or contrast roof treatments. Beyond the visual upgrade, the self-healing surface technology means light surface scratches caused by cleaning or incidental contact gradually disappear with heat exposure. The result is a headlamp that continues to look sharp miles and years down the road — exactly what your L405 deserves. What's Included 💡 Headlamp Tint Film × 2 Left and right pre-cut pieces for full fitment 🧰 Installation Tool Kit Complimentary fitting tools included as standard 📐 Pre-Cut Profile Precision cut to match L405 headlamp geometry exactly 🎨 Two Finish Options Blackened tint or clear transparent — choose your style Product Highlights Pre-cut to precisely match the 2013–2017 Range Rover L405 headlamp shape Premium TPU material — the same grade used in professional paint protection film Self-healing surface technology repairs light scratches with heat exposure Available in transparent clear or blackened tint for a blacked-out look Scratch and abrasion resistant for long-term surface clarity Protects against stone chips, road debris, and environmental contamination Preserves resale value by keeping headlamp surfaces in original condition No cutting or modification required — direct fit straight from the pack Complimentary installation tools included with every kit Fully removable without adhesive residue when carefully removed Compatibility Model Generation / Code Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–2021 Verify Before Purchase Range Rover Sport L494 2014–2017 Not This Kit Range Rover Sport L494 2018–2022 Not This Kit Range Rover Evoque L538 2015–2019 Not This Kit Range Rover Evoque L551 2020–Present Not This Kit Range Rover Velar L560 2017–2022 Not This Kit Discovery Sport L550 2016–Present Not This Kit If you are unsure whether this kit fits your specific vehicle, contact our team at +44 203 943 9919 Mon–Fri, 9am–7pm before ordering. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 minutes  ·  Tools: Included Thoroughly clean both headlamp surfaces with an alcohol-based solution to remove any dust, oils, grease, or wax residue. Ensure the surface is completely dry before proceeding. Work in a clean, dust-free environment at room temperature. Cold conditions can affect adhesion; a heated garage or indoor space is strongly recommended. Carefully peel back a small section of the film backing and align the pre-cut edge precisely to the headlamp housing border before committing to full application. Using the included squeegee tool, apply the film progressively from one edge, working outward to eliminate air bubbles and ensure full contact with the headlamp surface. For any stubborn edges or corners, gentle heat from a heat gun or hairdryer on a low setting can aid conformity — do not overheat the film. Allow a minimum of 24–48 hours for the adhesive to fully cure before exposing the headlamps to water, pressure washing, or heavy rain. ⚠ Note: Professional installation is recommended for best results, particularly if you have not previously applied PPF or vinyl film. Improper application may result in lifting edges, trapped bubbles, or misalignment. Ensure headlamp lenses are free from existing chips or damage prior to application. Protect Every Detail of Your Range Rover At Victorious Automotive, we supply accessories built to the standard your Land Rover or Range Rover demands. Trusted by over 12,300 verified customers worldwide, we ship globally via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop Range Rover L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes.

Victorious Automotive · Range Rover Vogue L405 · Exterior Protection Pre-Cut Headlamp Tint for Range Rover Vogue L405 (2018 and Newer) A precision-cut, self-healing TPU headlamp tint film engineered specifically for the Range Rover Vogue L405 — protecting your lights and sharpening the exterior aesthetic without compromise. Range Rover Vogue L405 2018–Present Self-Healing TPU Pre-Cut Fit Scratch Resistant Blackened & Transparent Exterior Protection Easy Installation Overview The Range Rover Vogue L405 in its post-2018 specification represents the full expression of Land Rover's flagship luxury ambition — and every detail of its exterior deserves to be maintained as such. The headlamp clusters are a defining design feature of the Vogue's face, and keeping them looking sharp, clear, and unblemished is something every discerning owner should prioritise from day one. This pre-cut headlamp tint film is designed to fit the 2018-onwards Range Rover Vogue L405 with no trimming required. Made from premium self-healing TPU (thermoplastic polyurethane), the film is virtually invisible in transparent finish or delivers a sleek, blacked-out aesthetic in the darkened variant — both options offering a layer of durable, long-term protection against road debris, UV degradation, and surface scratching. The self-healing technology means minor surface abrasions disappear with heat exposure, keeping your headlamps looking factory-fresh far beyond what an unprotected lens could achieve. Whether you're looking to preserve your investment or add a subtle sporting edge to the Vogue's commanding presence, this film delivers on both fronts with minimal effort and maximum impact. What's Included 💡 2× Headlamp Tint Films Pre-cut for Range Rover Vogue L405 2018+, driver and passenger side 🛠️ Installation Tool Kit Complimentary squeegee and application tools included 📋 Installation Instructions Step-by-step guide for a clean, bubble-free application 📦 Protective Packaging Films shipped flat in rigid packaging to prevent transit damage Product Highlights Precision pre-cut to match the exact headlamp profile of the Range Rover Vogue L405 2018+ Self-healing TPU material — minor scratches and swirls disappear with heat Scratch and abrasion resistant surface keeps lenses looking factory-new Available in Transparent (clear protection) and Blackened (stealth styling) finishes UV-resistant formula prevents yellowing and lens degradation over time No trimming required — direct fit saves time and reduces installation error Residue-free removal — leaves no adhesive marks when taken off cleanly Complimentary installation tools included for a professional finish at home Compatible across multiple Land Rover and Range Rover platforms Ships worldwide via DHL, FedEx, UPS, and TNT — fast and fully tracked Vehicle Compatibility Vehicle Years Fit Range Rover Vogue L405 2018–Present Direct Fit Range Rover Sport L494 2018–Present Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Vogue L460 2022–Present Verify Before Order Range Rover Sport L461 2022–Present Verify Before Order Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Required Thoroughly clean the headlamp surface using an alcohol-based cleaner to remove all wax, grease, and debris. Any contamination under the film will affect adhesion and clarity. Work in a dust-free, sheltered environment — avoid direct sunlight or high wind during application to prevent premature adhesion. Wet the headlamp surface lightly with a solution of water and a drop of washing-up liquid. This allows you to reposition the film before final placement. Carefully peel the backing from the film and align it precisely over the headlamp, using the pre-cut edges as your guide. Use the included squeegee tool to work out any air bubbles from the centre outward, pressing firmly toward the edges. Allow 24–48 hours for the adhesive to fully cure before driving at motorway speeds or exposing to heavy rain. ⚠ Important: Do not apply to a dirty, waxed, or recently polished surface. Incomplete cleaning is the primary cause of bubbling, lifting edges, and poor adhesion. If the ambient temperature is below 10°C, gently warm the headlamp surface with a heat gun before application to improve conformity around curves. The Detail That Sets Your Vogue Apart At Victorious Automotive, we supply premium accessories to Range Rover owners who refuse to compromise. This headlamp tint is one of the simplest, most effective upgrades you can make — protecting your lenses and elevating the exterior in under an hour. Trusted by over 12,300 verified customers worldwide. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, endorsed by, or in any way officially connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque L551 · Headlamp Protection Headlamp Tint Pre-Cut Film for Range Rover Evoque 2020+ (L551) Pre-cut TPU headlamp tint film engineered to the exact lens profile of the 2020+ Range Rover Evoque — delivering smoked or clear protection that installs cleanly, self-heals from minor abrasions, and keeps your headlights looking factory-fresh. Range Rover Evoque L551 2020 – Present Top-Grade TPU Self-Healing Scratch Resistant Blackened & Transparent Pre-Cut Fit Set of 2 Overview The 2020-onwards Range Rover Evoque L551 represents a genuinely refined evolution of Land Rover's most urban, design-led SUV. With its flush Matrix LED headlights and sculpted front end, the Evoque commands attention — but those exposed polycarbonate lenses are vulnerable to stone chips, road debris, UV yellowing, and the kind of fine-surface scratching that accumulates over daily use and progressively dulls that sharp, purposeful look. This pre-cut headlamp tint film is manufactured from high-grade TPU (Thermoplastic Polyurethane) — the same class of material used in professional paint protection film. The film arrives precisely shaped to match the exact headlamp outline of the L551 Evoque, meaning no trimming, no guesswork, and a clean installation that sits edge-to-edge without visible overhang. Available in both a dark smoked blackened finish for an aggressive, contemporary aesthetic, or a clear transparent version for those who simply want invisible protection. The self-healing surface technology means light swirl marks and minor surface abrasions disappear with exposure to heat — keeping the film looking as good as the day it was applied. If you care about the long-term condition of your Evoque, this is one of the simplest and most cost-effective protective upgrades you can make. What's Included 💡 Pre-Cut Headlamp Film 2 pieces — driver & passenger side, L551 profile 🧰 Application Tools Kit Included as complimentary gift with every set 🎨 Choice of Finish Blackened smoked or transparent clear 📋 Installation Guide Step-by-step guidance for a clean, bubble-free fit Product Highlights Pre-cut to exact L551 Evoque headlamp dimensions — no trimming required Top-grade TPU material with genuine self-healing surface technology Available in blackened smoked finish for a stealth aesthetic Available in transparent clear for invisible, unobtrusive protection Scratch and abrasion resistant against stone chips and road debris UV resistant — prevents lens yellowing and surface degradation over time Conforms to the lens contour for a smooth, bubble-free application Does not impair headlamp light output or beam pattern Removable without adhesive residue — non-destructive to original lens 100% brand new — each set packaged and quality-checked before dispatch Compatibility Vehicle Years Fitment Range Rover Evoque L551 2020 – Present Direct Fit Range Rover Evoque L538 2015 – 2019 Direct Fit Land Rover Discovery Sport 2016 – Present Direct Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Vogue L405 2013 – 2017 Direct Fit Range Rover Vogue L405 2018 – Present Direct Fit Range Rover Sport L494 2014 – 2017 Direct Fit Range Rover Sport L494 2018 – Present Direct Fit Range Rover Sport L461 2022 – Present Check Variant Defender L663 2020 – Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools: Included Thoroughly clean both headlamp lenses with a mild soapy solution and allow to dry completely. Remove any wax, grease, or contaminants from the lens surface for maximum adhesion. Lightly mist the lens surface with a water and soap solution. This allows you to reposition the film during application before the adhesive fully sets. Carefully peel the backing from the pre-cut film and align it to the headlamp lens, starting from one edge and working progressively across the surface. Use the included squeegee tool to smooth the film outward from the centre, pushing out any air pockets or moisture as you go. Use a heat gun or hairdryer on a low setting to gently warm the edges of the film, encouraging it to conform tightly to any curved or contoured areas of the lens. Allow 24–48 hours for the film to fully cure and bond before washing the vehicle or exposing it to heavy rain. Note: Ensure the vehicle is parked in a clean, dust-free environment during installation. Avoid applying in direct sunlight or extreme cold, as both conditions will reduce working time and adhesion quality. The self-healing function activates with heat — minor surface marks will naturally diminish in warm conditions or with brief exposure to warm water. Shop the Full Range Rover Evoque Collection Browse our complete range of precision-fitted accessories for the Range Rover Evoque L551 — from exterior protection to interior upgrades, all selected and quality-checked by our team of Land Rover specialists. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L538 · Headlamp Protection Headlamp Tint Pre-Cut Film – Range Rover Evoque 2015–2019 (L538) Precision pre-cut TPU headlamp tint film that shields your Evoque's headlights from stone chips, UV damage, and road debris — available in Blackened or Transparent finish. Range Rover Evoque L538 2015–2019 Top-Grade TPU Self-Healing Scratch Resistant Pre-Cut Fit Blackened & Transparent No-Drill Install Overview The Range Rover Evoque L538 (2015–2019) is a design-led compact SUV that commands attention on both urban streets and open roads. Its slim, swept headlamp clusters are one of its most defining aesthetic details — and one of the first elements to show the cosmetic toll of daily driving. Stone chips, road grit, and UV exposure gradually dull and pit the lens surface, detracting from the Evoque's polished presence. These precision pre-cut headlamp tint films are laser-profiled to follow every contour of the Evoque's headlamp housings exactly — no trimming, no guesswork, and no risk of misaligned edges. Made from top-grade thermoplastic polyurethane (TPU), the film is genuinely self-healing at a molecular level; light surface scratches disappear under warmth, keeping the lens looking factory-fresh for years. Choose Transparent to retain the original headlamp colour and simply add an invisible armour, or opt for Blackened to give your Evoque a sharper, more sinister look without permanently modifying any component. Unlike cheap vinyl alternatives, this TPU film resists yellowing, resists peeling at the edges, and maintains optical clarity so your light output is never compromised. Installation requires no professional tools and leaves no permanent residue — meaning it's fully reversible whenever you choose. It's one of the most impactful yet understated upgrades available for the Evoque L538. What's Included 💡 2× Pre-Cut Headlamp Films Left and right, profiled for Evoque L538 2015–2019 🧰 Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step application instructions 🎨 Choice of Finish Blackened smoke or crystal transparent Product Highlights Precision pre-cut profile for exact fit on Evoque L538 headlamps Top-grade TPU construction — flexible, durable, optically clear Self-healing surface technology repairs light scratches with heat Available in Blackened smoke or Transparent protective finish Protects against stone chips, road debris, dust, and UV rays Fully reversible — removes cleanly with no adhesive residue No trimming required — direct application straight from the pack Does not reduce headlamp light output or beam quality Resistant to yellowing, peeling, and edge lifting over time DIY-friendly installation — no professional fitting required Compatibility Vehicle Year Range Fitment Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Separate SKU Range Rover Velar 2017–2020 Separate SKU Range Rover Vogue L405 2013–2017 Separate SKU Range Rover Vogue L405 2018–Present Separate SKU Range Rover Sport L494 2014–2017 Separate SKU Range Rover Sport L494 2018–Present Separate SKU Land Rover Discovery Sport 2016–Present Separate SKU This listing is pre-cut specifically for the Range Rover Evoque L538 (2015–2019). If your vehicle is listed above with a 'Separate SKU' badge, please browse our full Range Rover Evoque collection or Discovery Sport collection to find the correct fitment. Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Tools Required Thoroughly clean the headlamp lens surface with an alcohol-based solution and allow to dry completely. Remove any wax, polish, or silicone residue for best adhesion. Working in a warm, dust-free environment, carefully peel the backing layer from the TPU film — handle by the edges to avoid fingerprint contamination on the adhesive side. Using the included spray solution (or a light mist of soapy water), lightly dampen the headlamp surface to allow the film to be repositioned during application. Align the pre-cut film to the headlamp — the precision cut profile should follow the lens edge exactly. Work from the centre outward. Use the included squeegee to push out any air bubbles and water pockets, working from the centre toward the outer edges in firm, smooth strokes. Use a heat gun or hairdryer on low heat to gently warm the film over curved edges, encouraging the TPU to conform and bond fully. Allow 24–48 hours for the adhesive to cure fully before washing the vehicle or exposing to heavy rain. ⚠ Note: Do not apply in cold temperatures (below 10°C / 50°F) as this reduces film flexibility and may cause lifting at edges. Ensure the headlamp surface is completely dry before beginning. Do not use abrasive cloths during cleaning. Complete Your Evoque's Look Explore the full range of accessories curated specifically for the Range Rover Evoque L538 — from exterior protection to interior upgrades — all hand-selected by Land Rover enthusiasts. Shop Range Rover Evoque L538 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names and codes are referenced solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Headlamp Protection Headlamp Tint Pre-Cut Film — Range Rover Velar 2017–2020 Precision pre-cut TPU headlamp protection film that shields your Velar's signature LED clusters from stone chips, road debris, and UV degradation — in Blackened or Transparent finish. Range Rover Velar 2017–2020 Top-Grade TPU Self-Healing Pre-Cut Blackened & Transparent Scratch Resistant 2-Piece Kit Overview The Range Rover Velar occupies a unique space in the Land Rover lineup — its flush surfaces, distinctive blade-style LED daytime running lights and sculpted headlamp housings are a defining part of its identity. Keeping those clusters looking pristine is non-negotiable for any Velar owner who takes their vehicle seriously. This pre-cut headlamp tint film is engineered specifically for the 2017–2020 Range Rover Velar, meaning there is no trimming, no guesswork and no wasted material. Made from top-grade TPU (Thermoplastic Polyurethane), the film delivers genuine self-healing properties — minor swirl marks and light surface scratches disappear with the warmth of sunlight or warm water, keeping the finish looking factory-fresh. Available in Transparent (near-invisible protection) and Blackened (a smoked stealth aesthetic), both options preserve full light output while adding a layer of durable defence against stone chips, insects, road grime and UV fading. TPU film at this grade outperforms traditional PVC or vinyl alternatives in longevity, clarity retention and edge-seal durability — qualities that matter on a vehicle designed to be driven hard and admired standing still. Each kit includes application tools, making this a satisfying home installation for any detail-minded owner. What's Included 💡 Pre-Cut Headlamp Film × 2 One piece per headlamp, cut to Velar profile 🛠️ Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step fitting reference 🎨 Choice of Finish Blackened smoked or crystal transparent Product Highlights Precision pre-cut to fit Range Rover Velar 2017–2020 headlamp housings Top-grade TPU material with genuine self-healing surface technology Available in Blackened smoked and Transparent clear finishes Protects against stone chips, road debris and insect damage UV-resistant formulation prevents yellowing and haze over time Scratch-resistant outer layer maintains optical clarity No cutting or trimming required — dry-fit ready out of the pack Preserves full LED light output in both finish options Residue-free removal without damage to headlamp housing Application tools included for a clean, professional finish Compatibility Model Year Range Fitment Range Rover Velar 2017–2020 Direct Fit Range Rover Evoque (L538) 2015–2019 Direct Fit Range Rover Evoque (L551) 2020–Present Direct Fit Discovery Sport (L550) 2016–Present Direct Fit Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Vogue (L405) 2018–Present Direct Fit Range Rover Sport (L494) 2014–2017 Direct Fit Range Rover Sport (L494) 2018–Present Direct Fit Range Rover Sport L461 (2022+) 2022–Present Verify Before Purchase Range Rover Vogue L460 (2022+) 2022–Present Verify Before Purchase Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Included in kit Thoroughly clean both headlamp housings with an isopropyl alcohol wipe to remove all dust, wax, grease and residue. Any contamination beneath the film will cause lifting. Work in a warm, dust-free environment — an indoor garage is ideal. Cold temperatures reduce film flexibility and adhesion quality. Lightly mist the headlamp surface with a slip solution (a few drops of baby shampoo in water works well) to allow repositioning during initial placement. Carefully peel the film from its backing and align it to the headlamp housing, starting from the centre and working outward. Use the included squeegee to push out air bubbles and excess slip solution from the centre towards the edges using firm, overlapping strokes. Carefully tuck and smooth all edges, ensuring full contact around curves and contours of the Velar headlamp profile. Allow the film to cure undisturbed for 24–48 hours before washing the vehicle or exposing the surface to standing water. Note: Ensure the film selected matches your exact model year. Headlamp housings changed between Velar facelifts — if you are unsure of your build date or specification, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Protect What Makes the Velar Distinctive Stone chips and road debris don't care about resale value. This precision-cut TPU film is the simplest, most effective way to keep your Velar's headlamps looking flawless — whether you choose stealth black or crystal clear. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery · Headlamp Protection Headlamp Tint Pre-Cut Film – Land Rover Discovery Sport, Range Rover Evoque, Velar & Range Rover (2013–Present) Precision pre-cut TPU headlamp tint film engineered for Land Rover and Range Rover models — delivering invisible protection and a refined blackened or clear finish with zero compromise to your lighting output. Discovery Sport 2016+ Range Rover Evoque Range Rover Velar Range Rover L405 Range Rover Sport L494 Top-Grade TPU Self-Healing Scratch Resistant Blackened & Clear Options Pre-Cut Fit 2 Piece Kit Overview The Land Rover Discovery Sport and its Range Rover siblings are vehicles built around presence and precision. Their swept, jewel-cluster headlamp designs are among their most striking visual features — and they're also among the first components to show the wear of daily driving. Stone chips, fine surface scratches, and UV haze can quickly diminish the clarity and impact of those lenses, affecting both aesthetics and resale value. This headlamp tint film is pre-cut using factory-accurate templates for each specific model and year range, meaning there's no trimming required and no risk of misalignment. Manufactured from premium self-healing TPU — the same class of material used in professional paint protection film — it bonds cleanly to the lens surface and absorbs minor abrasions over time, recovering its smooth finish without any intervention. Available in two finishes: a crystal-clear transparent option that protects without altering the look of your headlamps, and a blackened tint variant that adds a more aggressive, smoked aesthetic. Either way, your lenses stay sharp, your lighting remains fully operational, and the upgrade takes less than 30 minutes to apply at home. What's Included 💡 Pre-Cut Headlamp Film × 2 One piece per headlamp, precision cut to vehicle-specific templates 🧰 Application Tool Kit Squeegee and fitting tools included as complimentary gift 📋 Fitting Guide Step-by-step application instructions for a clean, bubble-free finish 🎨 Choice of Finish Blackened smoke tint or crystal-clear transparent — select at checkout Product Highlights Premium self-healing TPU material — minor scratches recover automatically over time Factory-accurate pre-cut templates — no trimming, no guesswork, no waste Available in blackened smoked tint or clear transparent finish Scratch, dust, and debris resistant surface coating UV-stable film — resists yellowing and hazing in prolonged sun exposure Does not interfere with headlamp output, DRL function, or beam pattern Pressure-sensitive adhesive — clean, residue-free removal when needed Full lens coverage including DRL sections and indicator zones Designed for DIY fitment — no professional tools or heat gun required Protects resale value by keeping lenses in original, unmarked condition Vehicle Compatibility Vehicle Year Range Fitment Land Rover Discovery Sport 2016 – Present Direct Fit Range Rover Evoque (L538) 2015 – 2019 Direct Fit Range Rover Evoque (L551) 2020 – Present Direct Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Vogue (L405) 2013 – 2017 Direct Fit Range Rover Sport (L494) 2014 – 2017 Direct Fit Range Rover Vogue (L405 Facelift) 2018 – Present Direct Fit Range Rover Sport (L494 Facelift) 2018 – Present Direct Fit Range Rover Sport L461 2022 – Present Not Compatible Range Rover Vogue L460 2022 – Present Not Compatible Land Rover Defender L663 2020 – Present Not Compatible Not sure which year or variant you have? Call us on +44 203 943 9919 and our team will confirm compatibility before you order. Installation Notes 🔧 DIY Friendly — Approx. 20–30 Minutes · No Tools Required Beyond Kit Supplied Thoroughly clean each headlamp lens with an isopropyl alcohol wipe and allow to dry completely. Any residue or moisture will affect adhesion. Identify the correct piece for each side — the pre-cut shapes are mirror images of one another. Do not attempt to fit them interchangeably. Lightly mist the headlamp surface with a solution of water and a small drop of washing-up liquid. This allows repositioning during placement. Peel back a small portion of the film backing and align the leading edge with the inner edge of the headlamp housing. Gradually peel and lay the film across the lens, using the squeegee to press outward from the centre — working out any bubbles as you go. Once fully applied, use the squeegee firmly across the entire surface to expel any remaining moisture and ensure full adhesion at the edges. Allow 24–48 hours for the adhesive to cure fully before washing the vehicle or driving in heavy rain. ⚠ Important: Do not apply in direct sunlight or temperatures below 10°C — the adhesive requires a moderate ambient temperature to bond correctly. If any lift occurs at the edges within the first 48 hours, re-press firmly with a clean cloth before the adhesive fully sets. Protect the Details That Define the Vehicle Headlamp clarity is one of the first things a trained eye notices on a used Land Rover or Range Rover. This pre-cut TPU film takes under 30 minutes to fit and keeps your lenses in showroom condition for years to come. Shop the full Discovery Sport and Range Rover accessory collections at Victorious. Shop Discovery Sport Accessories Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Decorative Rear Trunk Hook Frame — Land Rover Defender 90 & 110 (2020+) A precision-engineered chrome accent frame that elevates the rear load area of your Defender with a factory-finish aesthetic — installed in minutes, built to last. Defender L663 2020–2026 ABS Chrome Direct Fit Peel & Stick Silver Finish 90 & 110 Interior Trim ISO9001 Certified Overview The Land Rover Defender L663 was re-engineered from the ground up as a modern icon — a vehicle that balances genuine off-road capability with an interior that commands respect. Owners of the 2020-onwards Defender understand that every detail matters, from the tactile feel of the dashboard materials to the finishing quality of the load area. It's a vehicle that rewards those who pay attention to the finer points. This ABS Chrome Rear Trunk Hook Frame is designed to complement that ethos precisely. Fitted around the rear trunk hook mounting points, the decorative frame transforms a functional but overlooked area of the load compartment into a refined, chrome-accented detail that looks entirely at home in the Defender's premium cabin environment. The silver chrome finish mirrors the quality of OEM interior brightwork, giving the impression it was always meant to be there. Manufactured from high-grade ABS plastic with a chrome-effect coating certified to ISO9001 quality standards, this trim piece offers real durability alongside its cosmetic appeal. The automotive-grade adhesive backing means there's no drilling, no modification, and no risk to your vehicle's interior — just a clean, confident upgrade that takes under ten minutes to complete. What's Included 🪝 Chrome Trunk Hook Frame 1x decorative ABS chrome frame — model LLK2618 🔧 Pre-Applied Adhesive Automotive-grade 3M-style tape pre-fitted to reverse 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut to match the Defender 90 and 110 rear trunk hook aperture exactly High-gloss chrome ABS finish replicates the quality of OEM interior brightwork Durable ABS construction resists impact, flex, and everyday wear in the load area No drilling or permanent modification — fully reversible installation Automotive-grade adhesive ensures a secure, long-lasting bond to factory trim ISO9001 certified manufacturing process for consistent quality and finish Lightweight at just 200g — adds visual presence without adding bulk Compatible with all Defender L663 variants from 2020 onwards Clean silver chrome tone complements both dark and light interior colour schemes Compact dimensions (30cm × 15cm × 10cm) for straightforward fitment in the trunk area Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Verify Before Order Land Rover Defender (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L494 / L461 Any Not Compatible Range Rover Vogue L405 / L460 Any Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔩 Tools Required: None Open the Defender's rear tailgate fully and locate the trunk hook mounting area you wish to accent with the decorative frame. Thoroughly clean the target surface using an isopropyl alcohol wipe or equivalent automotive surface prep solution. Remove all dust, grease, and moisture. Allow the surface to dry completely — at least 2–3 minutes at room temperature — before proceeding. Test-fit the chrome frame without removing the adhesive backing to confirm alignment and positioning against the hook surround. Peel back the adhesive protective liner from the reverse of the frame, taking care not to touch the adhesive surface. Carefully align the frame to the hook surround and press firmly into position, applying even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before subjecting the area to moisture, heavy loading, or extreme temperature changes. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F) as adhesive performance may be significantly reduced in cold conditions. For best results, install indoors or in a warm garage environment. Upgrade Your Defender, Detail by Detail At Victorious Automotive, we stock the accessories that make the difference — the pieces that show you take your Defender as seriously as Land Rover's engineers did. Browse our full Defender L663 collection or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for personalised advice. Shop All Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Defender L663 · Interior Trim Red Aluminum Alloy Air Conditioning Knobs & Audio Circle Trim — Land Rover Defender 110 (2020–2026) A precision-machined aluminum upgrade that replaces the factory climate and audio trim with a bold, anodised red finish — purpose-built for the Defender L663 interior. Defender L663 2020–2026 Direct Fit Aluminum Alloy Anodised Red AC Knobs Audio Trim No Drilling Required Interior Upgrade Overview The Land Rover Defender 110 L663 carries a legacy that demands every detail be deliberate. Its interior architecture is bold and purposeful — and the climate and audio controls sit front and centre, used every single journey. If you've invested in a Defender, the standard plastic-finish knobs and surrounding trim rings are one of the few elements that don't quite match the ambition of the rest of the cabin. These red aluminum alloy AC knobs and audio circle trim pieces are engineered specifically for the 2020 and later Defender 110 L663. Machined from high-grade aluminum alloy and finished with a deep anodised red coating, they replace the OEM trim with a component that looks and feels significantly more premium. The tactile weight of real metal under your fingertips makes an immediate and noticeable difference — both in how the controls feel and how the interior presents overall. Installation requires no permanent modification to your vehicle. Each piece is designed to locate precisely onto the existing factory controls using a clip-and-press fitment, meaning you can complete the upgrade in minutes without tools. Whether you're building a full custom interior or simply looking for one well-chosen detail to elevate the cabin, this trim set delivers impact that is well above its price point. What's Included 🌀 AC Control Knobs Full set of climate control knob covers in anodised red aluminum 🔴 Audio Circle Trim Rings Matching red aluminum trim rings for the audio control surround 📦 Protective Packaging Each piece individually wrapped to prevent transit damage 📋 Fitment Guide Step-by-step reference included for straightforward installation Product Highlights Precision-machined from high-grade aluminum alloy for genuine metal quality Deep anodised red finish — resistant to fading, peeling, and daily wear Engineered as a direct fit for the Defender 110 L663 (2020 onwards) No drilling, cutting, or permanent modification required Clip-and-press installation — typically completed in under 15 minutes Significantly heavier and more tactile feel versus OEM plastic trim Full set covers both climate control knobs and audio trim rings Coordinates with other red aluminum interior accessories for a cohesive build 100% brand new — not refurbished or reconditioned Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 minutes  ·  Tools Required: None Ensure your Defender's interior is clean and dry. Wipe down the existing AC knob and audio trim areas with a microfibre cloth to remove any dust or residue. Carefully remove the existing OEM plastic knob covers by gripping firmly and pulling directly away from the fascia. They will release from the factory post with light pressure — do not twist. For the audio circle trim rings, locate the trim clip points around the perimeter and gently lever from one edge using your fingertip or a soft plastic pry tool if preferred. Align each new aluminum knob cover over the corresponding factory post, pressing firmly and evenly until you feel it seat securely with a positive click. Position each audio circle trim ring and press around the perimeter to engage all clip points. Run your finger around the edge to confirm full contact. Test each climate control knob through its full range of movement to confirm unrestricted operation before completing the installation. ⚠ Note: Confirm your specific Defender build year and trim level prior to ordering. While this set fits all standard L663 Defender variants from 2020 onwards, please verify if your vehicle has had any factory interior modifications or dealer-fitted trim upgrades that may affect fitment. Complete Your Defender Interior Browse the full range of Defender L663 interior accessories — from dashboard trim to gear surround panels — and build the cabin your Defender deserves. Shop Defender L663 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.