Victorious Automotive · Range Rover Sport · Exhaust & Styling
SVR Style Exhaust Muffler Tips for Range Rover Sport — Stainless Steel Rear Tail Pipe Set
Transform the rear end of your Range Rover Sport with SVR-inspired stainless steel exhaust muffler tips — a direct, no-paint upgrade that delivers factory-sport presence without factory-sport costs.
Range Rover Sport
SVR Body Kit Compatible
Stainless Steel 304
2 Piece Set
Rear Mounting
7.0cm Inlet
Part No. MQL-202
Silver Finish
Resistance Muffler Type
4KG Total Weight
Overview
The Range Rover Sport has always struck a rare balance between commanding road presence and genuine performance intent. Whether you're running the L494 or an earlier generation fitted with an SVR body kit, the rear of the vehicle is one of the most visible indicators of that sporting character — and the exhaust tips are central to that impression. Stock exhausts on non-SVR variants often appear understated by comparison, leaving the rear aesthetic feeling unfinished next to an otherwise purposeful body.
These SVR Style Exhaust Muffler Tips are precision-formed from Grade 304 stainless steel, offering the aggressive quad-outlet visual language of the full SVR without any permanent modification to your vehicle. The polished silver finish catches light at every angle, complementing the Sport's bold shoulder lines and rear diffuser design. At 4KG total for the pair, they feel substantive and premium — not hollow or lightweight afterthoughts.
Designed specifically for Land Rover models fitted with the SVR body kit, the tips feature a 7.0cm inlet diameter and rear mounting position, integrating cleanly with your existing exhaust system. No painting. No cutting. No specialist tools required — though professional fitting is always recommended for the cleanest result. These are a meaningful visual upgrade executed in the right material, for owners who know the difference.
What's Included
🔧
Exhaust Muffler Tips × 2
Matched pair, stainless steel 304, silver polished finish
📦
Protective Packaging
Securely boxed for international transit via DHL, FedEx, UPS or TNT
📋
Product Reference Card
Part number MQL-202 for warranty and fitment reference
Note: No printed installation guide is included. Professional installation is strongly recommended.
Product Highlights
- Grade 304 stainless steel construction for lasting corrosion resistance
- SVR-inspired dual-outlet design per side — four tips total visual effect
- Polished silver finish — no painting required, ready to fit
- 7.0cm inlet diameter for a secure, rattle-free fit
- Resistant to UV, water, road salt, grease, oil and mild acids
- Lightweight relative to its solid feel — just 4KG for the full pair
- Rear mounting position matches OEM SVR exhaust outlet placement
- No permanent modification to your exhaust system required
- Compatible with Range Rover Sport models fitted with SVR body kit
- Adds a genuine sporty presence without aggressive or over-styled aesthetics
Compatibility
| Vehicle |
Generation / Code |
Year Range |
Fitment |
| Range Rover Sport with SVR Body Kit |
L494 |
2013–2020 |
Direct Fit |
| Range Rover Sport SVR |
L494 |
2014–2020 |
Direct Fit |
| Range Rover Sport with SVR Body Kit |
L461 |
2022–2026 |
Verify Fitment |
| Range Rover Sport (Standard — No SVR Kit) |
L494 / L461 |
All |
Not Compatible |
| Range Rover Vogue L405 |
L405 |
2013–2020 |
Not Compatible |
| Range Rover Vogue L460 |
L460 |
2022–2026 |
Not Compatible |
| Land Rover Defender L663 |
L663 |
2020–2026 |
Not Compatible |
| Range Rover Evoque |
L538 / L551 |
All |
Not Compatible |
These tips are designed for vehicles fitted with the SVR body kit. If you're unsure whether your vehicle qualifies, contact us on +44 203 943 9919 before ordering.
Installation Notes
🔩 Installation Overview
Difficulty: Moderate | Estimated Time: 45–90 minutes | Tools: Basic hand tools, hose clamps or exhaust clamps
- Ensure the vehicle is parked on a flat surface and the exhaust system has fully cooled before beginning work.
- Measure your existing exhaust pipe outlet diameter to confirm compatibility with the 7.0cm inlet size of these tips.
- Clean the rear exhaust pipe ends thoroughly, removing any carbon build-up, rust or debris that could prevent a secure fit.
- Slide each muffler tip over the corresponding exhaust outlet, positioning it so the face of the tip aligns flush with the rear bumper cutout.
- Secure each tip using appropriate exhaust clamps, tightening evenly to prevent any lateral movement or vibration noise.
- Start the vehicle and allow it to idle for a few minutes. Inspect for any movement, rattling or exhaust leaks around the inlet joint.
- Once satisfied, give the tips a final wipe down with a microfibre cloth to remove any fingerprints before the steel fully heats and sets.
⚠ Important: No installation guide is included with this product. Professional installation is strongly recommended. Incorrect fitting may result in noise, vibration or damage to the exhaust system. Always allow exhaust components to fully cool before handling.
Built for Range Rover Sport Owners Who Don't Compromise
These SVR style exhaust tips are one of the most cost-effective ways to complete the rear styling of your Range Rover Sport. Explore our full collection of Range Rover Sport accessories — or call our team if you'd like personalised fitment advice.
Shop Range Rover Sport L494 Accessories
Shop Range Rover Sport L461 Accessories
Use code at checkout for 20% off any 2 items:
22GET20
⭐ 4.9/5 from 12,300+ verified reviews
🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT
↩ 30-Day Money-Back Guarantee
📞 +44 203 943 9919 Mon–Fri, 9am–7pm
Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.
