Range Rover Sport L494 MY13-20 Accessories

Victorious Automotive · Range Rover Sport L494 · Exterior Body Conversion Range Rover Sport SVR Body Conversion Kit — 2013–2018 Facelift Upgrade (L494) Give your pre-facelift Range Rover Sport L494 a complete 2018 SVR-inspired exterior transformation — from the front bumper to the rear lights — in bare plastic ready for your choice of finish. L494 2013–2018 SVR Style Bare Plastic Facelift Conversion Full Body Kit Front & Rear Fenders Included Sport Exterior Overview The Range Rover Sport L494 arrived in 2013 as one of the most dynamic and desirable SUVs on the road — refined, purposeful, and unmistakably Sport. When Land Rover refreshed the model in 2018 with an updated front and rear aesthetic, sharper lighting signatures, and revised body detailing, the visual gap between earlier and later examples became immediately apparent. For owners of 2013–2017 models, that gap no longer needs to exist. This SVR-style body conversion kit is engineered specifically for the pre-facelift Range Rover Sport L494, delivering a comprehensive update to every major exterior panel that defines the 2018 appearance. From the restyled SVR-influenced front bumper and updated grille to the revised rear bumper and 2018-spec lighting front and rear, this kit replaces the original old-style components with modern, cohesive alternatives that genuinely transform how the vehicle reads on the road. Supplied in bare plastic throughout, each component arrives ready for professional preparation, priming, and painting to your exact specification — whether you're matching an existing factory colour or creating something entirely bespoke. This is a high-commitment, high-reward upgrade for Sport owners who want their vehicle to look exactly as current as it feels to drive. What's Included 🔆 Front Lights — 2018 Style Updated LED-style units matching 2018 facelift signature 🔴 Rear Lights — 2018 Style Revised rear light cluster design for a cohesive facelift look 🚘 Front Bumper — 2018 Style SVR-influenced lower section and air intake styling 🔁 Rear Bumper — 2018 Style Updated rear diffuser-style bumper for a Sport facelift finish 🛡️ Front Fenders / Wings (L & R) Left and right updated fender panels for seamless panel fit ⬛ Black Grille — 2018 Style Dark finish SVR-inspired front grille surround 💨 Side Vents — 2018 Style Updated side vent inserts for both sides of the vehicle 🔩 Hood / Bonnet Vents — 2018 Style Revised bonnet vent inserts for the complete facelift look Product Highlights Complete exterior transformation from 2013–2017 spec to 2018 facelift appearance SVR-inspired styling throughout — front bumper, grille, vents, and rear Supplied in bare plastic — ready for professional painting to any colour Includes both front and rear bumpers for a fully cohesive conversion Front and rear 2018-style lights included — no need for separate purchases Left and right fenders/wings included for a seamless panel line continuation 2018 black grille surround adds depth and a modern, aggressive character Side vents and bonnet vents complete the full-body visual refresh Designed for models equipped with old-style (pre-facelift) headlights Engineered to L494 specification for accurate panel fitment and alignment Compatibility Vehicle Model Code Year Range Headlight Type Fitment Range Rover Sport L494 2013–2017 Old-style (pre-facelift) Direct Fit Range Rover Sport L494 2018 Facelift headlights Not Required Range Rover Sport L461 2022–2026 New generation Not Compatible Range Rover Vogue L405 2013–2020 Various Not Compatible Defender L663 2020–2026 N/A Not Compatible Installation Notes Difficulty: Advanced  ·  Estimated Time: 1–2 Full Days (Professional) Before fitment, dry-fit all components against the vehicle to confirm panel alignment and identify any preparation requirements. Have all bare plastic components professionally prepared, primed, and painted to your specification prior to installation — this will prevent colour mismatch after fitting. Disconnect the vehicle battery before removing or connecting any lighting components (front and rear lights). Remove the original front bumper, grille, side vents, bonnet vents, and front fenders carefully — retain all original hardware and mounting clips where possible. Remove the original rear bumper and rear light clusters, ensuring all wiring looms are safely disconnected and protected. Install the 2018-style front bumper, grille insert, fenders, and bonnet vents — align to factory mounting points and torque all fixings to manufacturer specification. Install the 2018-style rear bumper and connect the updated rear light clusters, ensuring secure wiring connections throughout. Fit the side vents to both sides and perform a full panel gap inspection before reconnecting the battery and verifying all lighting functions. ⚠ Important: This is a complex multi-panel body conversion. Professional installation by a qualified bodywork specialist is strongly recommended. Incorrect fitment may affect panel alignment, water ingress sealing, and lighting compliance. Always confirm legal road compliance requirements for lighting in your region before use. The Sport, Exactly As It Should Look The Range Rover Sport L494 deserves to wear the sharpest version of itself. This conversion kit is how you get there — every panel, every light, every vent replaced with the 2018 facelift design you've been looking at. Browse the full Range Rover Sport L494 collection for further exterior and interior upgrades. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always consult a qualified professional before undertaking bodywork modifications and verify road legality requirements in your jurisdiction.

Victorious Automotive · Range Rover Sport L494 · Exterior Body Range Rover Sport 2018 Real Carbon Fibre Hood Bonnet – L494 A full replacement carbon fibre bonnet engineered for the 2018 Range Rover Sport L494, delivering significant weight reduction and a race-inspired aesthetic with genuine 2×2 twill weave carbon construction. L494 2018 Real Carbon Fibre 2×2 Twill Weave Weight Reduction Direct Fit Exterior Body Sport Overview The Range Rover Sport L494 is already one of the most commanding performance SUVs on the road — a machine that balances sharp dynamic ability with everyday luxury. The 2018 model year in particular sits at a sweet spot in the L494 generation, benefiting from the revised Ingenium powertrains and updated driver assistance systems that make it as refined as it is capable. For owners who want to push the Sport's aesthetic further, the bonnet is one of the most visually impactful panels on the entire vehicle. This full replacement carbon fibre bonnet is constructed from genuine, high-grade real carbon fibre — not a carbon-look wrap or ABS plastic overlay. Laid up in a classic 2×2 twill weave and finished with a UV-resistant clear lacquer, the panel showcases the raw beauty of the material while offering measurable weight savings over the factory steel bonnet. The result is a cleaner front end, reduced unsprung mass, and a profile that reads as purposeful rather than theatrical. Designed as a direct-fit replacement for the Range Rover Sport L494, the bonnet retains all OEM mounting points, hinge attachment locations, and bonnet catch geometry. No cutting, fabrication, or professional body shop intervention is required beyond careful fitment and minor gap adjustment — something any competent enthusiast or trusted independent workshop can manage in an afternoon. What's Included 🪄 Carbon Fibre Bonnet Full replacement panel, real 2×2 twill weave carbon 🔩 OEM-Position Mounting Hardware Pre-fitted mounting inserts aligned to factory hinge points 📦 Protective Packaging Heavy-duty foam and wrap to protect the panel in transit 📋 Fitment Guide Step-by-step installation reference included Product Highlights Genuine real carbon fibre construction — no plastic imitations Classic 2×2 twill weave pattern with high visual clarity UV-resistant clear lacquer coat for long-term gloss retention Significant weight saving over factory steel bonnet Direct-fit replacement — all OEM mounting points retained Compatible with factory bonnet hinges and bonnet catch mechanism Precision moulded for accurate panel gap alignment Suitable for both road use and track/show preparation Designed exclusively for 2018 Range Rover Sport L494 Worldwide shipping available via DHL, FedEx, UPS, TNT Compatibility Model Code Year Range Compatibility Range Rover Sport L494 2018 Direct Fit Range Rover Sport L494 2014–2017 Verify First Range Rover Sport L494 2019–2021 Verify First Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Yes Open and support the existing factory bonnet safely using the bonnet stay. Disconnect any washer jet hoses or wiring loom clips attached to the underside of the OEM bonnet. With an assistant, support the bonnet and remove the factory hinge bolts (typically 4 bolts per side). Carefully lift the OEM bonnet clear of the vehicle and set aside. Dry-fit the carbon fibre bonnet to the hinge points. Do not fully tighten at this stage — allow for adjustment. Check panel gaps at the front edge, wings, and scuttle panel. Once satisfactory alignment is achieved, torque the hinge bolts to factory specification. Reconnect all washer jet hoses and wiring clips if applicable to your variant. Adjust the bonnet bump stops and bonnet catch striker plate as needed to achieve flush, even closure. Test the bonnet latch mechanism multiple times before driving. Inspect the lacquer finish for any transit marks and treat with a suitable automotive detailing spray before first use. ⚠ Please Note: Panel gaps on carbon replacement bonnets may require minor adjustment depending on individual vehicle tolerances. We recommend having the fitment checked by a professional body shop if you are unfamiliar with panel alignment. Do not drive the vehicle with an unsecured bonnet under any circumstances. If your vehicle features active bonnet (pedestrian protection) systems, consult your workshop prior to installation. Upgrade Your Range Rover Sport Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium quality accessories. Worldwide shipping, 30-day money-back guarantee, and a team of enthusiasts ready to help. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS, TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle codes referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover · Rear Seat Entertainment 11.4-Inch Rear Seat Entertainment Screens – Range Rover L460 / Sport L461 / L405 / L494 (2013–2026) Factory-style seat-mounted entertainment with an independent Android system, wireless screen projection, and an automotive-grade Snapdragon processor — designed specifically for Range Rover rear cabins. L460 2022–2026 L461 2022–2026 L405 2013–2020 L494 2013–2020 11.4" Curved Display 8GB RAM / 128GB Snapdragon Powered Wireless Projection Independent Android Seat-Back Mounted Overview The Range Rover rear cabin is one of the most refined spaces in the automotive world — and these 11.4-inch rear seat entertainment screens are engineered to match that standard exactly. Whether you're specifying an L460 Vogue, an L461 Sport, or an earlier L405 or L494 model, the seat-back mounting system integrates cleanly into the existing headrest posts, giving a factory-planted finish without modification to the vehicle's trim or structure. At the heart of each screen sits an automotive-grade Qualcomm Snapdragon processor paired with 8GB of RAM and 128GB of onboard storage — the kind of specification you'd expect from a flagship tablet, not an aftermarket accessory. The 11.4-inch curved display takes direct aesthetic cues from the Range Rover SV's factory rear screen configuration, with a 1:1 OEM-style profile that sits flush and purposeful against the seatback rather than looking like a bolted-on afterthought. Connectivity is comprehensive. Rear passengers can mirror their device wirelessly, stream directly from Netflix, YouTube, or Spotify via the independent Android OS, or connect peripherals via the built-in USB interface — all without touching the vehicle's native infotainment system. A 20° adjustable tilt and built-in speaker ensure each passenger gets a personalised, comfortable viewing experience regardless of seating position. This is rear cabin luxury done properly. What's Included 🖥️ 11.4" Curved Entertainment Screen OEM-style profile, SV-inspired design 🔩 Mounting Bracket & Wiring Seat-back headrest post fitment 🔌 12V Power Adapter Connects to vehicle 12V supply 📄 Installation Instructions Step-by-step fitment guide included Product Highlights 11.4" curved display with OEM-style profile inspired by the Range Rover SV rear screen configuration Automotive-grade Qualcomm Snapdragon processor for smooth, responsive performance in all conditions 8GB RAM and 128GB onboard storage — plenty of headroom for media, apps, and offline content Independent Android operating system — download Netflix, YouTube, Spotify, and more directly Wireless phone screen projection for seamless mirroring from iOS and Android devices Full Bluetooth and WiFi connectivity built in — no vehicle network dependency required Built-in speaker delivering clear, direct audio for each rear passenger independently 20° adjustable tilt mechanism for optimal viewing angle across all seating positions Original-style U interface designed to complement the factory interior finish and switchgear Seat-back headrest post mounting — no drilling, no permanent modification to the vehicle Compatibility Model Code Years Fitment Notes Range Rover Vogue L460 2022–2026 Direct Fit Seat-back headrest post mount Range Rover Sport L461 2022–2026 Direct Fit Seat-back headrest post mount Range Rover Vogue L405 2013–2020 Direct Fit Seat-back headrest post mount — select correct year at checkout Range Rover Sport L494 2013–2017 Direct Fit Seat-back headrest post mount — select correct year at checkout Range Rover Velar L560 2018–2024 Not Confirmed Contact us to verify seat compatibility Defender L663 2020–2026 Not Compatible Different seat architecture — not supported ⚠️ Accessories and mounting hardware differ between model years. Please select the correct year variant at checkout to ensure you receive the right fitment kit for your specific vehicle. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 Minutes per Screen Remove the front seat headrests and slide the mounting bracket onto the existing headrest post channels — no drilling or permanent modification required. Secure the screen assembly to the bracket using the supplied hardware and confirm the 20° tilt position suits your rear passenger preference. Route the power cable discreetly along the seat base and connect to a 12V supply — under-seat USB or vehicle auxiliary outlet connections are common tidy solutions. Power on the screen and complete the initial Android setup — connect to your vehicle's WiFi hotspot or a mobile hotspot to enable app downloads and streaming. Pair rear passenger devices via Bluetooth or initiate wireless screen projection from the Android home screen — the system is ready to use immediately. Professional Installation Recommended. While the mounting process is non-invasive, correct cable routing and power connection will ensure the best finish and long-term reliability. If you're unsure, we recommend using a trusted automotive installer. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll point you in the right direction. Turn Every Journey Into a First-Class Experience The Range Rover rear cabin deserves more than silence. These 11.4-inch screens bring genuine cinema-grade entertainment to your passengers — factory-finished, Android-powered, and built to the standard your vehicle demands. Shop Range Rover L460 Accessories Shop Range Rover Sport L461 Accessories Buying 2 or more items? Use code 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always confirm compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fibre Roof Light Pod with LED Lights — Range Rover Sport L494 (2014–2021) A handcrafted real carbon fibre roof pod with super-bright integrated LED lighting — engineered for a clean, non-destructive install that preserves every original switch and gauge on your Sport. Range Rover Sport L494 2014–2021 Real Carbon Fibre LED Roof Pod Wireless Remote Non-Destructive Fit Fuse Box Powered Aerodynamic Design Handcrafted Overview The Range Rover Sport L494 is a vehicle built around presence — commanding on the road, refined within the cabin, and unmistakable from any angle. For owners who want to push that presence further without compromising the factory aesthetic, the roof line remains one of the most underutilised styling opportunities on the platform. This carbon fibre roof light pod changes that entirely. Crafted from genuine woven carbon fibre and finished with a precision gloss coat, this roof pod is designed specifically for the Range Rover Sport 2014–2021. Its aerodynamic profile sits flush and purposeful on the roofline — reminiscent of the kind of accessory you'd expect to see on a factory SVR special edition. Integrated high-spec LED lights deliver a super-bright, even output that draws eyes day or night, whether parked on the street or moving through traffic. What separates this pod from lesser alternatives is the installation philosophy. There's no drilling, no permanent modification, and no interference with the Sport's OBD, infotainment, or switch panel. Power draws cleanly from the fuse box, and the lights are operated via a wireless remote control — leaving your factory switches, gauges, and interior trim completely untouched. It's a modification that looks like it was always meant to be there. What's Included 🪨 Carbon Fibre Roof Pod Handcrafted real carbon fibre shell with gloss finish 💡 Integrated LED Light Bar High-spec super-bright LEDs pre-fitted to pod housing 📡 Wireless Remote Control Operates the LED lights independently of factory switches 🔌 Wiring Loom Pre-terminated for direct fuse box connection — no error codes 🧲 Automotive 3M Mounting Tape Heavy-duty adhesive for secure non-destructive roof fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine woven carbon fibre construction — not plastic wrap or vinyl Precision gloss coat finish that complements factory bodywork Super-bright high-spec LED lights integrated into pod housing Wireless remote operation — zero factory switch interference Fuse box powered — clean, direct draw with no dashboard errors Non-destructive installation — no drilling, no permanent modifications Aerodynamic low-profile form designed for Sport L494 roofline Handcrafted one at a time — individually finished to high standard Fits all L494 Sport variants across the full 2014–2021 model run Retains 100% factory interior and exterior OEM appearance Compatibility Vehicle Code Years Fit Range Rover Sport SE L494 2014–2021 Direct Fit Range Rover Sport HSE L494 2014–2021 Direct Fit Range Rover Sport HSE Dynamic L494 2014–2021 Direct Fit Range Rover Sport SVR L494 2014–2021 Direct Fit Range Rover Sport Autobiography L494 2014–2021 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 1–3 Hours Thoroughly clean the roof mounting area using an isopropyl alcohol wipe to ensure the surface is completely free of wax, grease, or dirt residue. Dry-fit the roof pod to confirm positioning and alignment before committing to the adhesive — mark reference points lightly with masking tape if needed. Apply the included automotive 3M double-sided tape to the underside of the pod, then press firmly into position on the roof and hold for 60 seconds. Route the wiring loom discreetly through the roof seal and into the cabin — this typically follows the A-pillar trim channel without requiring permanent trim removal. Connect the wiring loom to an appropriate fuse in the fuse box — refer to your vehicle's fuse diagram for a suitable auxiliary circuit. Pair the wireless remote receiver to the LED system following the instructions included in the guide. Test the LED function across all modes using the remote before refitting any trim panels you may have temporarily displaced. ⚠ Please Note: The roof pod itself can be mounted by most owners with basic DIY confidence. However, the electrical wiring requires competence with automotive electrics. If you are unsure, we recommend having the wiring completed by a qualified auto-electrician. Installation is the responsibility of the customer. This product is handmade from real carbon fibre — minor surface variations are a natural characteristic of the material and not considered defects. Upgrade Your Range Rover Sport Today Shop the full Range Rover Sport L494 collection at Victorious Automotive — premium accessories for owners who refuse to settle for standard. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used for fitment reference purposes only.

Victorious Automotive · Range Rover · Deployable Side Steps Deployable Electric Side Steps for Range Rover Vogue, Sport, Velar & Evoque — 2013 to 2021 Motorised aluminium running boards that automatically deploy on door open and retract flush to the sill — combining effortless entry with a cleaner, more aggressive stance. L405 · L494 · Velar · L538 / L551 2013–2021 Aluminium Alloy Auto-Deploy 800 kg Load Rated ISO9001 Certified Direct Fit Part: Star War-008 Overview The Range Rover family — from the full-size Vogue L405 to the Sport L494, Velar, and Evoque — sits high on purpose. That ride height is part of what makes these vehicles so commanding on road and off, but it can make daily boarding less than graceful for passengers. Factory side steps were never offered across most of these generations, and static aftermarket boards compromise the clean sill lines that define these designs. These deployable electric side steps solve both problems. Triggered by the door latch signal, they extend automatically when any door opens and retract tight to the undercarriage the moment the door closes — completely hidden from view when not in use. The result is a step that appears exactly when it's needed and disappears entirely when it isn't, maintaining the original profile of the vehicle without compromise. Built from extruded aluminium alloy with anti-corrosion stainless steel plating and a non-slip tread surface, these steps are engineered to the same durability standards expected of the vehicles they serve. With an 800 kg load rating, a robust motor assembly, and certification to ISO9001 and TS16949, this is not an accessory built to the lowest acceptable specification — it's one built to last the life of the vehicle. What's Included ⚙️ Motor Assembly Dual motor unit with deploy/retract mechanism 🪜 Side Step Boards (Pair) Anti-slip aluminium tread surface, left & right 🔩 Metal Support Brackets Heavy-gauge mounting arms for rigid fitment 🔌 Electric Wiring Loom Pre-terminated harness for door trigger integration 🛠️ Fixings & Accessories All hardware required for complete installation Product Highlights Auto-deploy triggered by door open signal — no switches or manual effort required Retracts flush to the underside of the sill when doors are closed, preserving the vehicle's stance Extruded aluminium alloy construction — lightweight yet rigid under load Anti-corrosion stainless steel plating for long-term protection against road salt and moisture Rated to 800 kg static load — comfortably supports occupants of any size Anti-vibration design prevents rattles during driving over rough terrain Non-slip tread surface provides secure footing in wet or muddy conditions Soft-deploy motor reduces mechanical noise and extends component life Custom-designed brackets for each specific vehicle model — no cutting or fabrication required ISO9001 & TS16949 certified — manufactured to automotive-grade quality standards Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2021 Direct Fit Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L551 2019–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not This Listing Range Rover Sport L461 2022–2026 Not This Listing Defender L663 2020–2026 Not Compatible Specifications Specification Detail Material Aluminium Alloy + Stainless Steel + ABS Part Number Star War – 008 Position Both sides of vehicle (pair) Unit Weight 26–28 kg (full set) Load Rating 800 kg Fitment Type Custom bracket, vehicle-specific direct fit Certification ISO9001 & TS16949 Trigger Method Door open / close electrical signal Installation Notes Difficulty: Intermediate  ·  Estimated Time: 3–5 Hours  ·  Two People Recommended Safely raise and support the vehicle on axle stands. Do not work under a vehicle supported only by a jack. Remove any existing sill trim or protective covers to expose the mounting points beneath the door sills. Trial-fit the metal support brackets to confirm alignment with factory mounting locations before final torquing. Mount the motor assembly to the bracket arms, ensuring the step board travel path is clear of obstructions. Route the wiring loom through the vehicle's undercarriage, keeping it clear of exhaust and moving components. Secure with supplied cable ties. Connect the wiring loom to the door trigger signal — typically tapped from the door latch switch or interior light circuit. Consult wiring diagrams for your specific model year. Power on the vehicle and test deploy/retract cycles through all doors before lowering the vehicle. Refit sill trim and conduct a final visual inspection for clearance and secure fitment. ⚠ Note: Professional installation by a qualified automotive electrician or 4x4 specialist is strongly recommended. Incorrect wiring connections may trigger fault codes or affect door module functionality. Always disconnect the battery negative terminal before working on electrical circuits. Upgrade Your Range Rover — The Right Way At Victorious Automotive, every product we stock is selected specifically for Land Rover and Range Rover owners who refuse to compromise. These deployable steps are one of the most functional upgrades you can make — and one of the most satisfying to live with every day. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle build before purchasing.

Victorious Automotive · Range Rover Sport L494 / Vogue L405 · Multimedia Screens 12.3-Inch Android Multimedia Touchscreen for Range Rover Sport L494 & Vogue L405 (2013–2016) A factory-fit, plug-and-play 12.3-inch Android infotainment upgrade that brings Apple CarPlay, Android Auto, GPS, and full app support to your Range Rover — without touching a wire or losing a single OEM feature. L494 Sport L405 Vogue 2013–2016 12.3" HD Display Apple CarPlay Android Auto Plug & Play Built-in GPS WiFi + 4G SIM Android OS Overview The Range Rover Sport L494 and Vogue L405 represent a high point in Land Rover's design language — commanding road presence, a refined cabin, and a driving experience that still turns heads a decade on. The one area where time shows its hand is the factory infotainment system. Small screens, limited connectivity, and no native smartphone integration are the trade-offs of owning a vehicle from this era. This 12.3-inch Android multimedia screen is engineered specifically for the L494 Sport and L405 Vogue, slotting directly into the OEM dashboard aperture without modification. The floating bezel-less design mirrors the premium aesthetic of your interior, while the underlying Android OS delivers a fully connected, app-capable infotainment experience that feels entirely at home in a vehicle of this calibre. Critically, nothing is sacrificed. Steering wheel controls, parking sensors, factory amplifier output, and vehicle settings menus all carry over through the integrated CANbus decoder. This is a direct upgrade — not a compromise. From the moment you power on, it behaves as though it left the factory this way. What's Included 🖥️ 12.3" HD Touchscreen Unit Bezel-less floating display, IPS panel 🔌 Power & Wiring Harness OEM-matched connectors for direct fit 🧩 CANbus Decoder Retains steering controls & sensors 🪛 Mounting Frame & Trim Factory-matched fascia surround 📘 User Manual Step-by-step installation guide Product Highlights Apple CarPlay & Android Auto — wireless phone mirroring for navigation, calls, and media 12.3-inch IPS HD touchscreen with a clean, floating bezel-less design Android OS — install Waze, Spotify, YouTube, Netflix and more from the Play Store Built-in GPS navigation — works online and offline with pre-loaded maps WiFi, Bluetooth, USB, SD card, and 4G SIM card slot — always connected Retains OEM steering wheel controls, parking sensors, and climate display Factory sound system integration — no loss of amplifier or audio quality Reverse camera input & 360-degree camera integration ready Full multimedia playback — video, music, USB, and SD card support Plug-and-play CANbus integration — no cutting, coding, or dealer visits required Vehicle Compatibility Model Chassis Code Year Range Fit Range Rover Sport L494 2013 – 2016 Direct Fit Range Rover Vogue L405 2013 – 2016 Direct Fit Range Rover Sport L494 2017 onwards Verify Variant Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Vogue L460 2022 – 2026 Not Compatible Range Rover Velar L560 2018 – 2022 Not Compatible Please select the correct vehicle variant on the product page before ordering. If you are unsure which version applies to your vehicle, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5 – 3 Hours  ·  No Coding Required Safely disconnect the vehicle battery before beginning any work on the dashboard. Remove the OEM screen trim panel using appropriate trim removal tools — no cutting or permanent modification is needed. Unplug the factory screen connectors and set the original unit aside. Connect the supplied wiring harness and CANbus decoder to the vehicle's existing plugs — everything is matched to OEM connectors. Mount the new 12.3-inch unit into the supplied frame and secure into the dashboard aperture. Reconnect the battery, power on, and follow the on-screen setup wizard to configure CarPlay, Android Auto, and navigation preferences. Test steering wheel controls, reverse camera feed, parking sensors, and audio output before refitting all trim. ⚠ Professional installation is strongly recommended. While this unit is designed for plug-and-play fitment, working around dashboard electronics and CANbus systems requires care. Incorrect wiring can affect OEM vehicle functions. We recommend using a qualified auto electrician or Land Rover specialist for the best result. Modern Tech. Factory Fit. Future Ready. Your Range Rover deserves an infotainment system that matches everything else about it. This 12.3-inch Android screen brings your L494 Sport or L405 Vogue into the modern era — without compromise, without modification, and without losing what made your vehicle great in the first place. Shop Range Rover Sport L494 Accessories Shop Range Rover Vogue L405 Accessories Buying two items? Use code 22GET20 for 20% off your order. ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. Model names, chassis codes, and vehicle references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue / Sport · Android Displays 13.3-Inch Floating Android Display Upgrade for Range Rover Vogue L405 & Sport L494 (2018–2022) A precision-engineered floating Android screen that transforms the infotainment experience in your 2018–2022 Range Rover — without touching the original system architecture. L405 Vogue L494 Sport 2018–2022 13.3-Inch Display Android 13 Wireless CarPlay Android Auto 4G RAM / 128G ROM DSP Audio Bluetooth 5.0 Direct Fit Overview The Range Rover Vogue L405 and Sport L494 are benchmarks in luxury motoring — refined, capable, and deeply satisfying to drive. But even these exceptional vehicles carry an infotainment system that, by 2024 standards, falls short of what modern technology offers. If you've found yourself wishing for wireless CarPlay, faster navigation, or a crisper display, this upgrade was designed precisely for you. This 13.3-inch floating Android display slots directly into your existing dashboard environment as a dedicated overlay screen, working alongside your factory system rather than replacing it. Your original climate controls, vehicle settings, and JLR interface remain fully intact — this unit simply adds an expansive, high-resolution touchscreen running a full Android OS above it. The result is a dramatically upgraded cabin that still feels like a Range Rover. Built with a 1920×1080 capacitive multi-touch panel, a Qualcomm-grade processor, 4GB RAM, and 128GB onboard storage, the screen performs with the kind of fluidity you'd expect from a flagship tablet. Wireless Apple CarPlay and Android Auto connect instantly. Google Maps, Waze, YouTube, and the full Play Store are available natively. The integrated DSP chip ensures your audio system sounds as good as the screen looks — and Bluetooth 5.0 keeps calls and music streaming effortless. What's Included 🖥️ 13.3-Inch Android Screen 1920×1080 capacitive multi-touch, floating mount design 🔧 Vehicle-Specific Installation Kit All harnesses, brackets, and fasteners included for L405/L494 📖 User Manual Step-by-step setup and pairing guide 🎧 DSP Audio Module Pre-integrated for enhanced sound output via 4×50W Product Highlights Direct-fit for Range Rover Vogue L405 and Sport L494 (2018–2022) with no dashboard cutting required Preserves full factory system functionality — climate, vehicle settings, and original JLR menus remain active Climate control information displayed directly on the new Android screen for seamless dual-zone operation Wireless Apple CarPlay and Android Auto — no cables, no dongles, instant pairing Full Google Play Store access — download navigation, streaming, and productivity apps freely Integrated DSP chip delivers audiophile-grade sound processing through your factory speaker system Bluetooth 5.0 for crystal-clear hands-free calls and high-fidelity music streaming GPS navigation with offline map support and Google Maps / Waze compatibility Steering wheel control retention — manage volume, calls, and media without leaving the wheel Supports 70+ UI languages including English, French, German, Spanish, Arabic, and more Technical Specifications Specification Detail Screen Size 13.3 inches Screen Resolution 1920 × 1080 (Full HD) Touch Type Capacitive Multi-Touch Operating System Android (latest supported build) RAM / Storage 4GB RAM / 128GB ROM Processor Octa-core Video Playback HD 1080P / 4K supported Audio Output 4 × 50W with DSP chip Bluetooth Version 5.0 Wi-Fi Built-in, supports hotspot connectivity Wireless CarPlay Yes — wireless, no cable required Android Auto Yes — wireless GPS Navigation Built-in with offline maps Languages Supported 70+ languages Steering Wheel Control Retained via OEM integration Climate Display Yes — dual-zone on-screen display Compatibility Vehicle Code Years Fit Range Rover Vogue L405 2018–2022 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Vogue L405 2013–2017 Verify Dashboard Range Rover Sport L494 2013–2017 Verify Dashboard Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Browse accessories for your specific vehicle: Range Rover Vogue L405 · Range Rover Sport L494 · Range Rover Vogue L460 · Range Rover Sport L461 Installation Notes 🛠 Difficulty: Intermediate  |  Estimated Time: 60–90 Minutes  |  No Cutting Required Confirm your dashboard matches the reference images provided — this unit is designed for the 2018–2022 facelift interior layout of the L405/L494. Disconnect the vehicle battery before beginning any work on the dashboard or wiring harness. Carefully remove the factory infotainment surround trim using the supplied trim tools — no permanent modification required. Connect the supplied harness to the factory wiring connectors behind the original screen area, ensuring climate and steering wheel control cables are seated fully. Mount the floating screen assembly to the provided bracket and secure using the included fasteners. Reconnect the battery, power on the system, and follow the on-screen setup wizard to configure language, CarPlay pairing, and audio settings. Test all functions — climate display, steering wheel controls, CarPlay, navigation, and audio — before reassembling the trim. ⚠ Important: Please verify your dashboard matches the product images before ordering. Pre-2018 L405/L494 models feature a different interior layout and may not be directly compatible. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) or watch the step-by-step installation video before fitting. A three-year guarantee and professional engineer support are included with every unit. Elevate Every Journey Your Range Rover deserves an infotainment experience to match its capability. This floating Android display is one of the most impactful upgrades available for the 2018–2022 L405 and L494 — and it installs without a trace. Backed by 12,300+ verified reviews and a 30-day money-back guarantee, it's the upgrade you can fit with confidence. Shop Range Rover Vogue Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm 🔧 3-Year Guarantee with Engineer Support Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or associated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used solely for fitment reference purposes.

Victorious Automotive · Range Rover Sport L494 & Vogue L405 · Android Entertainment 13.3-Inch Floating Android Display Upgrade for Range Rover Sport L494 & Vogue L405 (2013–2022) A full-format 13.3-inch Android touchscreen that transforms your Range Rover's infotainment centre — bringing wireless CarPlay, Android Auto, and a modern interface to Sport L494 and Vogue L405 models without compromising any original vehicle functions. Sport L494 Vogue L405 2013–2022 13.3-Inch Screen Android OS Wireless CarPlay Android Auto 4K Video Bluetooth 5.0 DSP Audio GPS Navigation 4GB RAM / 128GB ROM Overview The Range Rover Sport L494 and Vogue L405 represent a landmark generation of Land Rover engineering — refined, capable, and built around a premium cabin experience. But the factory infotainment system, while functional at launch, increasingly falls short of the connected driving environment today's owners expect. Navigation lags, app limitations, and the absence of wireless smartphone integration are common frustrations that this upgrade resolves entirely. This 13.3-inch floating Android display is engineered specifically for the Sport L494 and Vogue L405 dashboard architecture. It slots into the factory location with a dedicated installation kit, retaining your original climate controls on-screen and preserving all steering wheel inputs. The result is a transformed centre console — expansive, responsive, and running a fully open Android platform with access to the Play Store, offline maps, streaming services, and more. With 4GB of RAM, 128GB of onboard storage, Bluetooth 5.0, built-in Wi-Fi hotspot support, and a DSP chip delivering audiophile-grade sound staging across your Range Rover's speaker system, this is not a compromise upgrade. It is a meaningful, lasting improvement to one of the cabin's most-used surfaces — delivered in a format that feels as though it should have been there from the factory. What's Included 🖥️ 13.3-Inch Android Screen 1920×1080 capacitive multi-touch display with floating panel design 🔧 Installation Kit All vehicle-specific brackets, harnesses, and fasteners required for fitting 📖 User Manual Step-by-step setup guide with pairing and configuration instructions Product Highlights Direct-fit design for Range Rover Sport L494 and Vogue L405, covering 2013–2022 model years Wireless Apple CarPlay and Android Auto — no cable required for smartphone mirroring Climate control system displayed on the new screen, maintaining full HVAC functionality DSP chip delivers enhanced sound quality with precise audio staging across all speaker channels Bluetooth 5.0 for stable, low-latency hands-free calling and music streaming Built-in GPS with offline map support and full Google Maps compatibility High-resolution 1920×1080 capacitive multi-touch display with dual-zone functionality Full steering wheel control integration for safe, distraction-free operation 4GB RAM and 128GB ROM for fast, responsive performance with ample app storage Supports up to 70 languages and 4K/HD 1080P video playback via built-in media player Compatibility Vehicle Code Years Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–2022 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Not sure which model you have? Check your V5C or contact us on +44 203 943 9919 and our team will confirm compatibility before you order. Installation Notes 📋 Difficulty: Intermediate  ·  Estimated Time: 2–3 Hours  ·  Tools Required: Trim tools, screwdrivers, basic wiring connectors Disconnect the vehicle battery and allow the system to fully power down before beginning any trim removal. Carefully remove the factory centre console trim panels using plastic trim tools to avoid scratching the surrounding surfaces. Disconnect the factory infotainment unit harnesses, taking note of each connector's position for reference during reinstallation. Connect the supplied vehicle-specific wiring harness to the new Android display unit, ensuring all connectors are fully seated. Secure the display into the dashboard using the included installation brackets, confirming the floating panel sits flush and level. Reconnect the vehicle battery and power on the system to verify display operation, climate control integration, and steering wheel controls. Pair your smartphone via Bluetooth or Wi-Fi and test CarPlay and Android Auto before completing final trim reassembly. ⚠ Important: Please verify your dashboard profile matches the product images before ordering. This product does not include the climate control screen shown in some reference images — the climate display is reproduced digitally on the new Android screen. A full installation video is available for guidance. Professional installation is recommended if you are unfamiliar with automotive trim and wiring work. Technical Specifications Specification Detail Screen Size 13.3 Inch Floating Capacitive Multi-Touch Resolution 1920 × 1080 (Full HD) Video Playback HD 1080P / 4K Supported RAM / ROM 4GB RAM / 128GB ROM Bluetooth Version 5.0 Wi-Fi Built-in, supports hotspot connectivity Output Power 4 × 50W with DSP chip Navigation Built-in GPS, offline maps, Google Maps CarPlay / Android Auto Wireless (both supported) Languages Up to 70 including English, French, German, Spanish Guarantee 3-Year Guarantee with engineer support Upgrade Your Range Rover's Cabin Today Your Sport L494 or Vogue L405 deserves a display that matches its character. This 13.3-inch Android upgrade brings modern connectivity, rich audio, and an intuitive interface to a platform built to last. Explore more upgrades for your vehicle below. Shop Range Rover Sport L494 Upgrades Shop Range Rover Vogue L405 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify dashboard compatibility using the provided product images prior to purchase.

Victorious Automotive · Range Rover Sport L494 · Tail Lights Smoked LED Rear Tail Light Assembly – Range Rover Sport L494 (2014–2020) Facelift Style A smoked, 2018 facelift-style LED tail light upgrade that transforms the rear presence of your L494 Sport — sold as a direct-fit pair with no modification required. L494 2014–2020 Smoked Finish Full LED Facelift Style ABS + PC Sold as Pair 12V Aftermarket Direct Fit Overview The Range Rover Sport L494 is one of the most visually commanding SUVs on the road — and the rear light signature plays a defining role in that presence. Whether you're running a pre-facelift 2014–2017 Sport or a later model looking to refresh the aesthetic, these smoked LED tail lights deliver an instantly recognisable upgrade without compromising function. Styled to replicate the refined 2018 facelift rear light design, these units combine a blacked-out smoked lens with a full LED light cluster — bringing a darker, more purposeful look to the Sport's rear end. The ABS and polycarbonate construction ensures durability in all conditions, while the 12V LED technology guarantees crisp, bright output for indicators, brake lights, and running lights alike. For pre-facelift L494 owners (2014–2017), this is one of the most impactful visual upgrades available — effectively bringing your Sport's rear styling in line with the 2018+ facelift specification. For 2018–2020 models, these units serve as a direct-fit, smoked-lens alternative to the OE units. Both left and right units are included, with precision-fit housings designed around the original mounting points. What's Included 💡 Left Tail Light Unit Driver side — smoked LED assembly 💡 Right Tail Light Unit Passenger side — smoked LED assembly 🔌 Wiring Connectors OE-matching plug connectors pre-fitted 🔩 Mounting Hardware Fixings compatible with OE apertures Product Highlights 2018 facelift-style LED design for all L494 model years Smoked blacked-out lens for a stealth, aggressive rear aesthetic Full LED cluster — running, brake, and indicator functions Sold as a matched pair — left and right included ABS + polycarbonate construction for long-term durability Precision moulded to OE mounting points — no drilling required 12V compatible — plug-and-play with factory wiring harness CCC externally tested and certified Direct upgrade for pre-facelift 2014–2017 L494 models Aftermarket replacement option for 2018–2020 L494 models Compatibility Vehicle Model Code Year Range Fit Type Notes Range Rover Sport L494 2014–2017 Direct Fit Tuning upgrade to 2018 facelift style Range Rover Sport L494 2018–2020 Direct Fit OE replacement with smoked finish Range Rover Sport L461 2022–2026 Not Compatible Different platform and rear architecture Range Rover Vogue L405 2013–2021 Not Compatible Different vehicle model Range Rover Vogue L460 2022–2026 Not Compatible Different vehicle model Defender L663 2020–2026 Not Compatible Different vehicle model Installation Notes Difficulty: Beginner–Intermediate  |  Estimated Time: 30–60 Minutes  |  Tools Required: Basic Hand Tools Open the tailgate and locate the access panel or trim covering the tail light mounting area on each side. Remove the retaining nuts or bolts securing the original tail light unit — typically 2–3 fixings per side. Carefully pull the OE tail light assembly away from the body, taking care not to stress the wiring loom. Disconnect the OE wiring connector from the back of the original unit — note the orientation before removal. Connect the new smoked LED tail light unit to the factory wiring connector — it should click securely into place. Position the new unit against the body, aligning with the OE mounting points, and secure with the original fixings. Repeat for the opposite side, then test all light functions — running, brake, and indicator — before reassembling trim panels. Important: Always disconnect the vehicle battery before working with electrical components. If your vehicle is under warranty, consult your dealership before making modifications. Some 2014–2017 pre-facelift vehicles may require a resistor or coding adaptation to prevent indicator hyper-flash — test all functions before finalising installation. Upgrade Your L494 Sport's Rear Signature These smoked LED tail lights are one of the most impactful visual modifications available for the Range Rover Sport L494 — bringing facelift aesthetics and a darker, more purposeful stance to any model year. Explore more Sport L494 accessories at Victorious. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. This product is an aftermarket part and is not manufactured by or sourced from JLR.

Victorious Automotive · Range Rover Sport L494 · Interior Upgrades Digital Instrument Cluster & Speedo Upgrade — Range Rover Sport L494 (2013–2017) Replace your factory analogue cluster with a full digital LCD display — giving your pre-facelift L494 the modern, high-resolution dashboard it always deserved. Range Rover Sport L494 2013–2017 Digital LCD Display Plug & Play Right-Hand Drive OEM+ Fitment Pre-Facelift Interior Upgrade Overview The Range Rover Sport L494 arrived in 2013 as one of the most desirable performance SUVs on the market — but the cabin of those early pre-facelift models now struggles to match the visual standard set by newer generations. The factory analogue-style instrument cluster in particular can feel distinctly out of place against owners who have since upgraded their infotainment, ambient lighting, or trim. The interior deserves to keep up. This digital instrument cluster upgrade is engineered specifically for the L494 Sport (2013–2017), replacing the original dial-based unit with a full high-resolution LCD display that mirrors the kind of digital cockpit experience found in current Range Rover models. It reads speed, RPM, fuel levels, engine temperature, trip data, and real-time vehicle information — all presented through smooth animations and a clean, premium interface. Designed with OEM-grade fitment tolerances and right-hand drive compatibility, this upgrade slots directly into your existing dashboard housing. It pairs naturally with Apple CarPlay screen upgrades, climate control display retrofits, ambient lighting kits, and carbon fibre trim — making it one of the most impactful single interior modifications available for the pre-facelift L494. What's Included 🖥️ Digital LCD Instrument Cluster Full-resolution display unit, pre-calibrated for L494 fitment 🔌 OEM-Compatible Wiring Harness Connects directly to factory loom — no cutting or splicing required 🔧 Mounting Hardware All fixings included for direct-fit installation 📋 Installation Guide Step-by-step fitting instructions included in the box Product Highlights Full digital high-resolution LCD instrument cluster display Displays speed, RPM, fuel level, temperature & trip data OEM-style design — no visible modification to dashboard housing Plug & play compatibility (vehicle-dependent — see notes) Right-hand drive UK specification compatible Smooth transition animations and modern UI interface Retains all core factory vehicle warning functions and data OEM+ appearance inspired by current Range Rover Sport models Enhanced premium cabin presence — pairs with other interior upgrades Compatible with petrol and diesel L494 variants (spec-dependent) Compatibility Vehicle Year Range Variant Fitment Range Rover Sport L494 2013–2017 3.0 SDV6 Diesel Direct Fit Range Rover Sport L494 2013–2017 4.4 SDV8 Diesel Direct Fit Range Rover Sport L494 2013–2017 3.0 V6 Supercharged Petrol Direct Fit Range Rover Sport L494 2013–2017 5.0 V8 Supercharged Petrol Direct Fit Range Rover Sport L494 2013–2017 SVR 5.0 V8 Supercharged Confirm Before Order Range Rover Sport L494 2018–2022 (Facelift) All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Installation Notes 📐 Difficulty: Intermediate  |  ⏱ Estimated Time: 1–2 Hours Disconnect the vehicle battery and allow a 10-minute discharge period before beginning work. Remove the steering column surround trim panels carefully using a trim removal tool — clips are plastic and will snap if forced. Unscrew and slide out the factory analogue instrument cluster from its housing, noting the orientation of the unit. Disconnect the existing OEM wiring connectors from the rear of the factory cluster. Connect the supplied wiring harness to the vehicle's factory loom — connectors are keyed and should click firmly into place. Seat the new digital cluster into the dashboard housing and secure using the provided mounting hardware. Refit the steering column surround trim, reconnect the battery, and power on the vehicle to test full display functionality. Verify all readings — speed, fuel, temperature, RPM — are displaying correctly before completing final panel reassembly. ⚠ Please Note: Compatibility can vary depending on vehicle specification, build date, and existing factory options. We strongly recommend confirming your VIN and trim level with our team before ordering — especially on SVR variants or vehicles with non-standard factory configurations. Some vehicles may require a brief software initialisation via OBD diagnostic tool. Professional installation is recommended if you are unfamiliar with dashboard removal. Upgrade Your L494 Interior The digital instrument cluster is one of the most visually transformative upgrades available for the pre-facelift Range Rover Sport. Pair it with a CarPlay screen, ambient lighting kit, or carbon fibre trim refresh for a complete cabin transformation. Shop All Range Rover Sport L494 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names, model names, and vehicle codes referenced are used solely for the purpose of product compatibility identification. Installation of aftermarket accessories should be carried out by a qualified technician where required. Always confirm fitment compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover · Rear Entertainment 11.8" Android Rear Entertainment Screens for Land Rover Range Rover A matched pair of ultra-thin 11.8" Full HD Android 12 headrest screens — pre-loaded with a Land Rover interface theme, ready for Netflix, YouTube, and more via a simple 12V connection. L405 · L460 · L461 · L494 Android 12 11.8" Full HD IPS Sold as a Pair Google Play Store WiFi + Bluetooth Plug-and-Play 12V Aluminium Alloy Body Overview The Range Rover cabin is engineered around comfort — and for rear passengers, that expectation extends well beyond legroom. Whether you're covering motorway miles, heading to an airport, or keeping younger passengers occupied on longer journeys, the back of a Range Rover deserves entertainment that's genuinely worthy of the vehicle around it. These 11.8" Android Rear Entertainment Screens are built specifically for that brief. Running Android 12 with the full Google Play Store, they put Netflix, Prime Video, YouTube, Spotify, games, and more directly in front of rear passengers — on a cinema-quality 1920×1280 IPS display with a 2.5D curved aluminium alloy body that sits cleanly and confidently behind the front headrests. The pre-installed Land Rover interface theme ensures nothing about the experience looks or feels out of place inside a premium cabin. Connectivity options are comprehensive: built-in WiFi, 3G/4G dongle support, Bluetooth audio output, FM transmission, IR headset compatibility, and a 3.5mm audio jack give each passenger complete individual control. Power runs from any 12V source, and mounting brackets slip over existing headrest posts — no drilling, no permanent modifications, no specialist tools. Fit both screens in under an hour and transform every rear seat into something significantly more engaging. What's Included 📺 11.8" IPS Screens × 2 Full HD 1920×1280, Android 12, pre-paired as a set 🔧 Adjustable Mounting Brackets × 2 Headrest post mount, height-adjustable, tool-free fit 🔌 12V Power Cables & Hardware Full power connection accessories for both screens 📶 3G/4G Dongle Support Stream via phone hotspot or USB mobile data dongle 📄 Installation Guide Step-by-step printed setup instructions included Product Highlights 11.8" IPS Full HD display — 1920×1280 resolution, 15:10 aspect ratio for immersive viewing Android 12 OS with full Google Play Store access — Netflix, YouTube, Spotify and more Pre-installed Land Rover interface theme for a seamless, factory-consistent cabin feel Ultra-thin 2.5D curved aluminium alloy body — premium finish, minimal visual intrusion Built-in WiFi and 3G/4G dongle support — stream on the move without a separate device Bluetooth audio, FM transmission, 3.5mm jack, IR headset, and 2W built-in stereo speakers USB and SD card support with 1080p and 4K video decoding for offline media playback Smart ambient light sensor — display brightness auto-adjusts to cabin and external light Quad-Core ARM Cortex-A53, 1.5GB RAM, 8GB ROM — responsive, fluid everyday performance Sold as a matched pair — one dedicated full-featured screen per rear passenger seat Tech Specifications Operating System Android 12.0 Display 11.8" IPS, 1920×1280, 15:10 aspect ratio Processor Quad-Core ARM Cortex-A53 RAM / Storage 1.5GB RAM / 8GB ROM External Storage SD card support up to 128GB Connectivity WiFi, 3G/4G dongle (USB), Bluetooth, AV In/Out Audio Output Built-in 2W stereo speakers, 3.5mm jack, FM, IR headset, Bluetooth Power Input 12V DC Body Material Aluminium alloy, 2.5D curved glass Video Decoding 1080p Full HD / 4K supported Languages English, French, Spanish, German, Chinese, Japanese, Russian, Portuguese & more Quantity Sold as a pair (× 2 screens) Compatibility Model Generation Years Fitment Range Rover Vogue L405 2013–2021 ✓ Compatible Range Rover Sport L494 2013–2021 ✓ Compatible Range Rover Vogue L460 2022–2026 ✓ Compatible Range Rover Sport L461 2022–2026 ✓ Compatible Range Rover Evoque L538 2012–2018 ✓ Compatible Range Rover Evoque L551 2019–2026 ✓ Compatible Range Rover Velar L560 2018–2024 ✓ Compatible Land Rover Discovery 5 L462 2017–2026 ✓ Compatible Land Rover Defender L663 2020–2026 ⚠ Verify Headrest Type Mounting brackets are designed for standard dual-post headrest configurations. Compatible across all listed models and trim levels including SE, HSE, Autobiography, and SVR/SV. If you are unsure whether your specific vehicle or seat configuration qualifies, call our team on +44 203 943 9919 before ordering. Installation Notes ⚡ Easy  ·  30–60 Minutes  ·  No Special Tools Required Remove the front headrests. Lift both front seat headrests straight up and out of their guide posts. The mounting brackets will fit over these same posts — no modification to the seat, frame, or trim is required. Attach the mounting brackets. Slide the adjustable mounting brackets down over the headrest guide posts. Set the height so the screen will sit at a comfortable eye level for rear passengers, then tighten the thumbscrews firmly to lock the bracket in position. Mount the screens. Clip each screen unit onto its respective bracket. Use the bracket arm pivot to angle each display face toward the rear passenger for an optimal viewing position — typically a slight downward tilt works best. Refit the headrests. Slide the front headrests back into their guide posts above the brackets. The bracket body sits cleanly between the seat back and headrest with no interference to height adjustment or safety function. Connect the power. Route the supplied 12V power cable to the nearest available power source. The rear 12V socket is the simplest connection point. For a cleaner finish, the cable can be routed discreetly through the seat base gap or along the sill trim. Connect to WiFi and complete setup. Power on both screens, connect to your phone hotspot, in-car WiFi, or 4G dongle, sign into a Google account, and install your chosen apps directly from the Play Store. Both screens operate independently. Note: For a fully concealed cable run with no visible wiring, we recommend having a car audio or accessories specialist route the power feed through the seat base or door sill trim. This typically takes under 30 minutes and gives the installation a completely factory-fitted appearance. Every Journey. First Class. Whether it's the school run, a cross-country drive, or an airport transfer in the dark — rear passengers deserve an experience that genuinely matches the vehicle they're riding in. These screens deliver exactly that, without a single compromise to the cabin's premium look or feel. Backed by a 30-day money-back guarantee, 4.9★ from 12,300+ verified reviews, and worldwide shipping via DHL, FedEx, UPS, and TNT. Shop the Full Range Rover Collection → Use code 22GET20 for 20% off any two items ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide shipping · DHL, FedEx, UPS, TNT ↩️ 30-day money-back guarantee 📞 Expert advice Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and designations are referenced solely for product fitment identification purposes. Android and Google Play are trademarks of Google LLC. Netflix, YouTube, Spotify, Prime Video, and all other referenced app or service names are trademarks of their respective owners. App availability is subject to individual account and subscription requirements. Screen images shown are for illustration purposes only.

Victorious Automotive · Range Rover Sport / Vogue / Evoque · Infotainment Upgrades 10.25-Inch Android Screen Upgrade for Range Rover Sport, Vogue & Evoque Replace your factory infotainment display with a stunning 10.25-inch high-resolution Android screen — unlocking Apple CarPlay, Android Auto, Google Maps, Waze, Spotify and more, while keeping all original Land Rover functions fully intact. Range Rover Sport L494 Range Rover Vogue L405 Range Rover Evoque L538 2012–2017 10.25" Display Android 6.0 Apple CarPlay Android Auto Built-in WiFi Direct Fit Overview The Range Rover Sport, Vogue and Evoque models from 2012 to 2017 are exceptional vehicles — composed, capable and refined in almost every respect. But their factory infotainment systems were designed in an era before Waze, Spotify, Apple CarPlay and Android Auto became everyday essentials. The standard Land Rover InControl interface simply wasn't built to accommodate the apps and connectivity features that drivers now rely on daily. This 10.25-inch Android screen upgrade is engineered specifically to replace the factory unit with a seamless, high-resolution display that brings your Range Rover's interior firmly into the modern age. Running Android 6.0 on a Quad Core Cortex A9 processor with 2GB RAM and 32GB onboard storage, this head unit delivers tablet-grade performance within a factory-fit form factor — no cutting, no bodywork modifications, no compromise. The upgrade includes a free Apple CarPlay USB dongle, enabling full CarPlay and Android Auto functionality alongside native Android app access. Critically, your original Land Rover interface remains fully accessible at any time — simply press the NAV button to toggle back. Everything from your climate controls to your vehicle settings stays exactly as it was. This is an enhancement, not a replacement of character. What's Included 🖥️ 10.25" Android Head Unit 1280×480 anti-glare, anti-blue ray capacitive touchscreen 📱 Apple CarPlay USB Dongle Enables wired CarPlay and Android Auto connectivity 🔌 Vehicle-Specific Wiring Harness Plug-and-play fitment, no splicing required 🔧 Trim Surround & Fascia Matched to factory dash aesthetic for a clean finish 📋 Installation Guide Step-by-step printed instructions included 🎧 3.5mm Audio Output DSP EQ control with original sound system retained Product Highlights 10.25-inch 1280×480 high-resolution capacitive touchscreen with anti-glare nano-optical coating Apple CarPlay and Android Auto support via included USB dongle — iPhone and Android compatible Android 6.0 OS with Quad Core Cortex A9 processor — run Waze, Google Maps, Spotify and WhatsApp natively Full original Land Rover InControl interface preserved — press NAV at any time to switch back Built-in WiFi for real-time traffic, online music streaming and over-the-air app updates Bluetooth hands-free calling, music streaming and synchronised address book integration Mirror Link support for both iOS and Android — wired and wireless modes with mutual control 1080P video playback via USB 2.0 — supports MP4, AVI, MKV, MOV and more High-speed CAN bus integration — seamlessly communicates with your vehicle's original electronics 360° panorama camera and DVR input support — blind-spot monitoring and FCWS compatible Compatibility Vehicle Year Range Fitment Range Rover Vogue L405 2013–2015 Direct Fit Range Rover Sport L494 2013–2015 Direct Fit Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Sport HSE 2013–2016 Direct Fit Range Rover Vogue L405 2016–2020 Verify First Range Rover Sport L494 2016–2020 Verify First Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your exact specification? Send photos of your dashboard to us before ordering and we'll confirm fitment. Call +44 203 943 9919 Mon–Fri, 9am–7pm. Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–120 minutes Carefully remove the factory infotainment unit using trim removal tools to avoid damaging the surrounding dash panels. Disconnect the original wiring harness connectors from the rear of the factory unit. Connect the supplied vehicle-specific wiring harness to the new Android head unit — all connectors are keyed and labelled for straightforward installation. Seat the new 10.25-inch unit into the dash aperture and secure using the provided mounting hardware. Refit the trim surround and fascia panels, ensuring all clips engage cleanly. Connect the Apple CarPlay USB dongle to the designated USB port on the head unit. Power on the vehicle and run through the initial setup wizard to configure WiFi, language and display preferences. Test all original vehicle functions — climate, audio, navigation — by pressing the NAV button to verify the factory interface remains fully operational. ⚠ Important: Installation requires an intermediate level of DIY competence. We strongly recommend professional installation to protect both your vehicle and this product. Victorious Automotive cannot accept responsibility for damage resulting from non-professional installation. Installation support is available — contact us directly if you need guidance. Technical Specifications Specification Detail Screen Size 10.25 inches Resolution 1280 × 480 Operating System Android 6.0.1 Processor AC8227L Quad Core Cortex A9 @ 1.6GHz RAM 2GB DDR3 Storage 32GB eMMC 5.0 Wireless Built-in WiFi + Bluetooth CarPlay / Android Auto Via included USB dongle Video Playback Up to 1080P — MP4, AVI, MKV, MOV, FLV, TS Audio Formats MP3, WMA, APE, FLAC, AAC Languages English, French, German, Spanish, Italian, Russian, Portuguese, Swedish, Turkish, Korean, Japanese DVD Not included Upgrade Your Range Rover's Interior Today Over 12,300 verified customers trust Victorious Automotive for premium Range Rover and Land Rover upgrades. Worldwide shipping via DHL, FedEx and UPS. Backed by our 30-day money-back guarantee. Shop Range Rover Sport Upgrades Shop Range Rover Vogue Upgrades Shop Range Rover Evoque Upgrades Buy any 2 items and save 20% with code 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by or approved by Jaguar Land Rover Limited, Land Rover, Range Rover or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover / Land Rover · Infotainment Upgrades Apple CarPlay & Android Auto Upgrade for Range Rover & Land Rover (2012–2018) — Plug & Play Android Box Bring full Apple CarPlay, Android Auto, Waze, Spotify and Netflix to your Range Rover or Land Rover infotainment screen — no cutting, no coding, true plug-and-play installation. Apple CarPlay Android Auto Plug & Play 2012–2018 Range Rover Vogue Range Rover Sport Range Rover Evoque Discovery 4 Land Rover Freelander 2 Jaguar XF / XJ Android 6.0 Quad Core 1.6GHz 2GB RAM / 16GB ROM Overview Range Rover and Land Rover vehicles produced between 2012 and 2018 came equipped with the InControl Touch infotainment platform — a capable system for its era, but one that was never designed with today's connected driving in mind. Native support for Spotify, Waze, Google Maps, WhatsApp or any third-party app simply isn't possible through the factory interface, leaving owners of some of the finest SUVs on the road with a surprisingly limited digital experience. This Android Box upgrade resolves that entirely. Wiring directly into your vehicle's existing infotainment harness, it overlays a fully functional Android 6.0 environment onto your factory screen — no screen replacement, no permanent modification. From the moment it's connected, your Range Rover or Land Rover gains access to Apple CarPlay and Android Auto via the included USB dongle, plus standalone Android tablet functionality including streaming apps, browser access, and full Google Play compatibility. Crucially, your original InControl system remains completely intact. The Android overlay can be exited at any time simply by pressing the NAV button on your factory controls, returning the vehicle to its standard interface. Climate controls, parking sensors, vehicle settings and all factory functions continue to operate exactly as Land Rover intended — this upgrade adds capability, it doesn't remove anything. What's Included 📦 Android Interface Box Quad Core 1.6GHz, 2GB RAM, 16GB ROM 🔌 CarPlay / Android Auto USB Dongle Enables wireless CarPlay & Android Auto interface 🔗 Vehicle-Specific Wiring Harness Direct-fit plug connection — no cutting required 🗺️ Pre-loaded Navigation Maps IGO9, TomTom, Garmin or Sygic (advise region required) 📖 Installation Support Video guides included; email support available Product Highlights Full Apple CarPlay support via included USB dongle — iPhone mirror on factory screen Full Android Auto support — Google Maps, Waze, Spotify, WhatsApp and more Standalone Android 6.0 tablet mode — YouTube, Netflix, browser, Google Play One-press return to factory InControl interface via NAV button — no settings menu required Powerful T3 Quad Core 1.6GHz CPU for fast, responsive performance 2GB DDR3 RAM and 16GB internal storage for smooth multitasking Internal Mirror-Link for direct smartphone screen mirroring Dual USB input slots — connect phone and storage simultaneously Supports external hard drives up to 1TB for media playback TPMS built-in support and dynamic reversing sensor integration Vehicle Compatibility Vehicle Year Range Fitment Range Rover Vogue (L405) 2012–2017 Direct Fit Range Rover Sport (L494) 2013–2017 Direct Fit Range Rover Evoque (L538) 2011–2015 Direct Fit Land Rover Discovery 4 2012–2016 Direct Fit Land Rover Discovery Sport (Dual View) 2015+ Direct Fit Land Rover Freelander 2 2013–2015 Direct Fit Jaguar XF 2012–2015 Direct Fit Jaguar XJ 2012–2015 Direct Fit Range Rover Sport (L461) 2022+ 2022–2026 Not Compatible Range Rover Vogue (L460) 2022+ 2022–2026 Not Compatible Defender L663 (2020+) 2020–2026 Not Compatible Not sure if this fits your exact vehicle? Send dashboard photos to sales@victorious.shop and our team will confirm fitment before you order. Installation Notes Difficulty: Intermediate  |  Estimated Time: 45–90 minutes Remove the factory infotainment head unit from the dashboard using appropriate trim tools (refer to vehicle-specific guides). Locate the factory infotainment harness connector at the rear of the head unit. Connect the vehicle-specific wiring harness from the Android box inline between the factory connector and the head unit — no cutting required. Mount the Android box in a suitable location behind the dashboard with adequate ventilation. Insert the CarPlay / Android Auto USB dongle into one of the dual USB ports on the Android box. Reassemble the dashboard trim and power on the vehicle to confirm the interface loads correctly. Pair your iPhone or Android device via the dongle and launch your preferred CarPlay or Android Auto session. Press NAV at any time to return to the standard Land Rover InControl interface. ⚠ Important: Installation requires a degree of confidence working behind vehicle trim panels and infotainment hardware. We strongly recommend professional installation by a qualified auto electrician. Victorious Automotive accepts no responsibility for damage caused during DIY installation. Full email installation support is available at sales@victorious.shop — we're here to help. Technical Specifications Specification Detail Operating System Android 6.0.1 Processor T3 Quad Core 1.6GHz RAM 2GB DDR3 Internal Storage 16GB iNAND External Storage Support Up to 1TB via USB CarPlay / Android Auto Via included USB dongle Smartphone Compatibility iOS 9.1+ / Android 5.1+ USB Inputs Dual USB slot Mirror-Link Internal (included) Navigation Maps IGO9, TomTom, Garmin, Sygic Touchscreen Five-point touch via factory screen TPMS Built-in support Reversing Sensor Dynamic overlay supported Media Formats JPG, JPEG, BMP, GIF, MP4 and more Upgrade Your Range Rover's Infotainment Today Your Range Rover deserves a connected experience that matches its capability. This plug-and-play upgrade is one of the most impactful changes you can make to a 2012–2018 InControl-equipped Land Rover or Range Rover — without touching a single factory wire permanently. Shop Range Rover Vogue Upgrades Shop Range Rover Sport Upgrades Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Apple Inc., or Google LLC. All vehicle model names, trademarks and brand identifiers are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Range Rover Sport (2014–2017) High Gloss Black Interior Trim Set — 8 Pieces A precision-engineered 8-piece ABS interior trim upgrade that delivers a polished, high gloss black finish tailored specifically for the Range Rover Sport L494 facelift generation. Range Rover Sport L494 2014–2017 High Gloss Black ABS Plastic 8-Piece Set Direct Fit Interior Trim No Drilling Required Overview The Range Rover Sport L494, produced between 2014 and 2017, carries a commanding presence both inside and out. Its interior was already a step forward from its predecessor — but for owners who want to push that aesthetic further, the factory trim finish can feel understated. This high gloss black interior trim set is built specifically for that generation, restoring a sense of sharpness and modernity to the cabin without the cost or complexity of an OEM upgrade. Crafted from high-grade ABS plastic, each of the eight pieces is individually moulded to mirror the geometry of your Sport's original trim panels. The deep, mirror-like gloss black finish reflects light cleanly and integrates seamlessly with both lighter and darker interior colour schemes — whether your Sport is finished in Ebony, Ivory, or any of Land Rover's other interior palettes from that era. Unlike generic trim kits, this set is designed with the L494 Sport's specific dash, door and console architecture in mind. Fitment is achieved via pre-applied adhesive backing, removing the need for any drilling, cutting or professional bodywork — making this one of the highest-impact, lowest-effort interior upgrades available for this generation of Sport. What's Included 🎛️ Dashboard Trim Piece Central fascia accent panel 🚗 Centre Console Trim Gloss surround for gear selector area 🚪 Door Panel Trim × 2 Driver and passenger side accents 🎚️ Air Vent Surround Trim Gloss accent ring for centre vents 🖐️ Armrest Trim Piece Centre console armrest accent 🔳 Infotainment Surround Screen bezel accent panel ⚙️ Gear Selector Trim Rotary gear selector surround 📦 Protective Packaging Each piece individually wrapped for safe transit Product Highlights 100% brand new — never fitted, zero compromise on finish quality Deep mirror-like high gloss black surface finish throughout Precision-moulded ABS plastic for exact L494 panel geometry Pre-applied 3M-grade adhesive backing for clean, tool-free installation Full 8-piece set covering key interior focal points in one purchase No drilling, cutting or modification required to your existing trim Reversible installation — original trim remains fully intact beneath Resistant to everyday wear, UV exposure and interior temperature fluctuation Compatible with all trim and interior colour variants of the 2014–2017 Sport Arrives individually packaged to prevent transit damage to the gloss surface Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (pre-facelift) Not Compatible Range Rover Sport L494 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a different generation of Range Rover Sport, browse our full Range Rover Sport L494 collection or our new Range Rover Sport L461 collection for compatible alternatives. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 30–60 Minutes  ·  🛠 Tools Required: None Thoroughly clean each target interior panel with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond strength. Dry-fit each trim piece against its corresponding panel before committing, confirming alignment and coverage against the existing trim geometry. Starting from the centre of the cabin, peel the protective backing from the adhesive layer and position carefully — trim pieces are not repositionable once contact is made. Apply firm, even pressure across the entire surface of each piece for 30–60 seconds to activate the adhesive bond fully. Work outward from the centre console toward the door panels, completing one piece at a time to maintain consistency. Allow a minimum of 12 hours before exposing the freshly installed trim to heat sources or direct sunlight — this allows the adhesive to fully cure. ⚠ Note: Ensure all panels are free of dust, grease and moisture prior to installation. Applying trim to a warm surface (e.g. a cabin warmed by sunlight) can slightly improve adhesion in cooler climates. If you are unsure about any step, professional installation is always recommended for the best long-term result. Upgrade Your Sport's Interior Today Trusted by over 12,300 Range Rover and Land Rover owners worldwide, Victorious Automotive delivers precision-engineered accessories backed by a 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS and TNT. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are the property of their respective owners and are used for fitment reference purposes only.

Victorious Automotive · Range Rover Sport L494 · Running Boards & Side Steps Fixed Side Steps & Running Boards — Range Rover Sport L494 (2013–2022) Permanently mounted, structural-grade aluminium and ABS side steps engineered for a direct, bolt-on fit to the Range Rover Sport L494 — enhancing entry, stance, and exterior presence in a single upgrade. Range Rover Sport L494 2013–2022 Fixed Mount Aluminium + ABS 220 lbs Load Rating Direct Bolt-On No Drilling Required Pair Included Sport Exterior Overview The Range Rover Sport L494 sits at a commanding ride height — a deliberate design choice that defines its road presence and off-road capability. But that same height can make entry and exit less gracious for passengers and cargo alike. These fixed side steps address that directly, providing a stable, permanent boarding platform that integrates cleanly with the Sport's lower body architecture without compromising its aggressive silhouette. Constructed from a combination of high-quality aluminium and durable ABS plastic, these running boards are built to withstand the demands of daily use as well as more challenging conditions. The fixed design means there are no moving parts, no electronic systems to fail, and no reliance on vehicle power — just solid, dependable footing every time you open the door. Each board is rated to support up to 220 lbs (100 kg), giving you genuine confidence whether you're stepping up in a car park or loading gear on a trail. The fit is specific to the L494 chassis — not a universal bracket solution, but a dedicated mount geometry that mirrors the Sport's factory sill line. The result is a step that looks like it belongs, not like an afterthought. Installation uses existing vehicle fixing points and requires no cutting or drilling into your bodywork, making this a clean, reversible upgrade that can be completed at home with basic tools. What's Included 🪜 Step Boards × 2 Left and right matched pair, pre-finished 🔩 Mounting Brackets Vehicle-specific bracket set included 🔧 Bolts & Screws Full hardware kit, no separate purchases needed 📋 Installation Guide Step-by-step instruction sheet included Product Highlights Direct bolt-on fitment for Range Rover Sport L494 — no cutting or drilling required High-quality aluminium construction with ABS plastic cladding for a refined finish Fixed design with no moving parts — zero maintenance and zero failure points Rated to 220 lbs (100 kg) per board — confident load bearing for all passengers Matched left and right pair included as standard — complete kit out of the box Anti-slip step surface for safe boarding in wet or muddy conditions Low-profile integration follows the Sport's factory sill line for an OEM-style look Full hardware and mounting bracket set included — nothing extra to source Compatible with all L494 body variants across the 2013–2022 production run Reversible installation — original fixing points preserved if removed Compatibility Vehicle Code Years Fit Range Rover Sport HSE L494 2013–2022 Direct Fit Range Rover Sport SVR L494 2015–2022 Direct Fit Range Rover Sport SE L494 2013–2022 Direct Fit Range Rover Sport Dynamic L494 2013–2022 Direct Fit Range Rover Sport Autobiography L494 2013–2022 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic hand tools Park the vehicle on a level surface and ensure the sill area is clean and free from mud or debris before beginning. Locate the factory mounting points along the underside of the vehicle sill on both the driver and passenger sides — no new holes are required. Attach the supplied mounting brackets to the factory fixing points using the provided bolts, ensuring each bracket is flush and torqued to specification. With a second person assisting, align each step board onto the mounted brackets, checking that the step surface is level and the leading/trailing edges are symmetrical. Secure the step boards to the brackets using the remaining hardware from the kit. Do not fully tighten until both boards are positioned and visually confirmed to be even. Perform a final torque pass on all fixing points, then check each board by applying body weight gradually to confirm stability before use. Note: Professional installation is recommended if you are unfamiliar with under-vehicle work. Ensure all bolts are correctly torqued — undertightened fixings can cause movement or noise during driving. Do not exceed the 220 lb (100 kg) per-board load rating. Engineered for the Sport. Built for Owners Who Know the Difference. Every part stocked at Victorious Automotive is selected for fit, finish, and longevity — because Range Rover Sport owners deserve accessories that match the standard of the vehicle itself. Browse the full L494 collection and build the Sport you've always intended. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious · Land Rover / Jaguar · Infotainment Wireless Apple CarPlay & Android Auto for Land Rover Discovery Sport & F-Pace Upgrade your factory infotainment with wireless smartphone integration, navigation apps, and seamless OEM control. Discovery Sport L550 F-Pace X761 Discovery 5 L462 2015–2023 Wireless + Wired Apple CarPlay Android Auto Overview Your Land Rover Discovery Sport, F-Pace, or Discovery 5 deserves infotainment that keeps pace with modern smartphone apps. Land Rover InControl has limitations: no Spotify, Waze, Google Maps, or WhatsApp integration. This wireless Apple CarPlay and Android Auto module breaks through those constraints, giving you the apps and navigation you rely on while maintaining full OEM steering wheel and touchscreen control. This retrofit Android box integrates seamlessly into your factory display. Switch between the Land Rover interface and your preferred smartphone ecosystem by pressing NAV or Home—no permanent changes, full reversibility. Wireless CarPlay via Bluetooth and WiFi, wired CarPlay via Lightning cable, or Android Mirroring via USB Link. Add aftermarket front, rear, or 360° cameras with dynamic guidance lines. Control music, navigation, and voice commands through Apple Siri or your vehicle's steering wheel buttons. Built for Discovery Sport (L550), F-Pace (X761), and Discovery 5 (L462) owners who demand modern connectivity without sacrificing the reliability and refinement of their Land Rover or Jaguar. What's Included 📦 Android Box Module Wireless CarPlay & Android Auto unit 🔌 USB Dongle Android Mirroring & wired CarPlay adapter 📡 WiFi & Bluetooth Wireless connectivity for all devices 🔊 Advanced EQ Customisable audio profiles (Pop, Rock, Soft, Standard) Key Features Wireless Apple CarPlay via Bluetooth & WiFi pairing Wired CarPlay via Lightning cable connection Android Mirroring via USB Link & dongle Google Maps, Waze, Apple Maps with live traffic Spotify, Apple Music, Amazon Music via factory speakers Voice control with Siri integration Support for aftermarket 360° cameras with dynamic guidance USB media playback (music & video files) Full steering wheel button compatibility One-touch toggle between Land Rover & smartphone interface Compatibility Vehicle Model Year Range Status Land Rover Discovery Sport 2015–2023 Direct Fit Jaguar F-Pace 2015–2023 Direct Fit Land Rover Discovery 5 2017–2023 Direct Fit Range Rover Sport L494 2013–2020 Check AUX/AMI Range Rover Vogue L405 2013–2020 Check AUX/AMI Important: Before ordering, confirm your vehicle has an active AUX input or an AMI (Aston Martin Interface) connection in the armrest storage box. This module requires compatible audio routing to function correctly. Installation & Setup Difficulty: Intermediate | Time: 60–90 minutes Prepare. Gather the module, USB dongle, and documentation. Identify the AUX or AMI connector in your armrest storage box or beneath the centre console. Power down. Turn off the ignition and disconnect the negative battery terminal for 30 seconds to reset the infotainment system. Connect audio. Locate the AUX or AMI connector and plug the module's audio input cable. Route cables neatly behind the trim panel to avoid pinching or heat exposure. Secure the box. Mount the Android box in a location with adequate airflow (typically above or below the infotainment unit). Use supplied brackets or adhesive pads. USB dongle setup. For wired Android Mirroring or CarPlay, connect the USB dongle to the module and route the cable to the front-facing USB port of your vehicle. Bluetooth pairing. Power the module. On your iPhone or Android phone, search for the module's Bluetooth ID and pair. For wireless CarPlay, ensure WiFi is enabled on both the module and your phone. Test navigation. Open Google Maps, Waze, or Apple Maps. Confirm touchscreen and steering wheel controls work. Toggle between Land Rover and smartphone interfaces using the NAV or Home button. Audio calibration. Adjust the equaliser settings (Pop, Rock, Soft, Standard) to your preference using the on-screen menu. Camera setup (optional). If adding aftermarket cameras, connect them to the module's camera inputs. Enable dynamic guidance lines in settings. Reconnect battery. Restore the negative terminal. Perform a full system reset by holding the power button for 10 seconds. Test all functions. Note: If your vehicle does not have an active AUX or AMI interface, this module will not function. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to verify compatibility before installation. Elevate Your Infotainment Stop settling for limited factory navigation and music apps. Bring wireless CarPlay, Android Auto, and your favourite apps into your Discovery Sport, F-Pace, or Discovery 5 with plug-and-play ease. Full steering wheel control. Zero loss of OEM functionality. Shop Discovery Sport Shop Discovery 5 Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ 4.9★ from 12,300+ reviews ✓ Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar, or JLR. Land Rover®, Jaguar®, Discovery®, F-Pace®, and Range Rover® are registered trademarks of Jaguar Land Rover Ltd. All product names and specifications are for reference only.

Land Rover · Range Rover Sport L320 · Rear Lighting Smoked Look Rear Lamps — Range Rover Sport L320 (2005–2013) A bold, darkened aesthetic upgrade for your L320 Sport — direct-fit tail light assemblies that transform the rear end without compromising on visibility or road legality. L320 2005–2013 Smoked Finish PC + ABS Construction 12V Tail Light Assembly Direct Fit CCC Certified 6kg Pair Overview The Range Rover Sport L320 was a turning point for Land Rover — sharper, more athletic, and distinctly purposeful compared to anything the brand had produced before it. Produced from 2005 through to 2013 across multiple facelifts and trim levels, the L320 remains one of the most recognisable performance SUVs of its era. Owners who have held onto these vehicles — or recently acquired one — understand that keeping it looking sharp is just as important as keeping it mechanically sound. These smoked look rear lamp assemblies are purpose-designed for the L320 chassis, replacing the standard clear or amber-accented OE units with a darker, more aggressive tinted finish. Constructed from high-grade PC (polycarbonate) and ABS plastic, the housings are impact-resistant, UV-stable, and built to endure the same conditions your Sport was designed to handle. The smoked lens filter softens the rear lighting cluster into a cohesive, blacked-out aesthetic that sits perfectly alongside factory Sport Black packs or any custom build. Unlike generic aftermarket options, these assemblies are engineered as complete drop-in replacements. All mounting points, wiring connectors, and bulb positions mirror the factory specification — meaning no cutting, no splicing, and no guesswork. Whether you're refreshing a tired rear end or building toward a stealth-spec look, these lamps deliver a measurable visual improvement from the moment they're fitted. What's Included 🔴 Left Rear Lamp Assembly Driver-side, smoked finish, complete unit 🔴 Right Rear Lamp Assembly Passenger-side, smoked finish, complete unit 🔌 OE-Match Wiring Connectors Direct plug-in, no modification required 🔧 Mounting Hardware Factory-spec fixings included 📄 Fitting Guide Step-by-step installation reference Product Highlights Smoked tinted lens finish for a stealth, blacked-out rear aesthetic Complete left and right assembly — sold as a pair PC + ABS construction for impact resistance and long-term durability UV-stabilised housing prevents yellowing and discolouration over time Direct OE replacement — no cutting, drilling, or wiring modification Factory-matched mounting points for a flush, rattle-free fit Compatible with 12V standard bulb configuration CCC externally tested and certified for quality assurance Covers all L320 production years including pre- and post-facelift variants Lightweight at approximately 6kg per pair — no structural load concerns Compatibility Vehicle Model Code Year Range Trim Fitment Range Rover Sport L320 2005–2009 (Pre-Facelift) S, SE, HSE, Supercharged Direct Fit Range Rover Sport L320 2009–2013 (Facelift) S, SE, HSE, Autobiography, GT Direct Fit Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L322 / L405 All Years All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: T20 Torx, Trim Removal Tool Open the tailgate fully and locate the access panel inside the boot lining adjacent to each rear lamp cluster. Remove the trim clips or fasteners to expose the lamp housing bolts. Using a T20 Torx driver, remove the three to four retaining bolts securing the lamp assembly to the body. Support the unit from the outside to prevent it dropping. Carefully pull the lamp assembly away from the bodywork. Disconnect the wiring loom connector by pressing the release tab and pulling firmly — do not tug the wiring itself. Unbox the new smoked lamp assembly. Confirm the unit matches orientation (left or right) before proceeding. Connect the wiring loom connector to the new unit until you hear it click into place. Align the new lamp assembly with the mounting holes and hand-tighten the retaining bolts before torquing to factory specification. Ensure the gasket seats flush against the bodywork to prevent water ingress. Refit the boot lining trim panel, then test all functions — stop lights, indicators, reverse, and fog — before closing the tailgate. Repeat the process on the opposite side. ⚠ Important: Smoked lamp lenses reduce light transmission relative to clear OE units. Always verify that your brake, indicator, and fog light functions remain visible and compliant with local road lighting regulations before driving on public roads. If in any doubt, consult a qualified auto-electrician or vehicle lighting specialist. Upgrade Your L320 Sport Today The smoked rear lamp upgrade is one of the most impactful and cost-effective changes you can make to the rear of a Range Rover Sport L320. Order today with worldwide DHL, FedEx, UPS, or TNT shipping — and enjoy complete peace of mind with our 30-day money-back guarantee. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Rear Tailgate Lip Spoiler for Range Rover Sport (2014–2020) Premium carbon fiber tailgate enhancement designed to elevate your Sport's rear profile with authentic styling and lasting durability. L494 2014–2020 Carbon Fiber Tailgate Lip Weather-Resistant Direct Fit Overview The Range Rover Sport L494 (2014–2020) commands presence on any road. This Carbon Fiber Rear Tailgate Lip Spoiler refines that authority by adding contemporary styling to the vehicle's rear fascia—a subtle but unmistakable upgrade that separates thoughtfully equipped Sports from standard builds. Machined from genuine carbon fiber, this lip transforms the tailgate's lower edge with clean lines and a contemporary aesthetic. The material's inherent lightweight properties—combined with superior weather resistance—mean this piece endures seasons of UK weather, UV exposure, and daily use without degradation or fading. Installation is straightforward for most owners, though professional fitting ensures the perfect gap and alignment. Once fitted, you'll notice the visual impact immediately: a more sculpted rear, sharper lines, and a finish that signals the level of care you invest in your Sport. What's Included 🎯 Carbon Fiber Lip Single-piece tailgate spoiler, precision-fitted for L494 ⚙️ Mounting Hardware Stainless fasteners and adhesive strips included 📋 Installation Guide Step-by-step instructions with torque specs 🛡️ 30-Day Guarantee Full refund if you're not completely satisfied Product Highlights Genuine carbon fiber construction—lightweight yet rigid Precision-engineered fit for 2014–2020 L494 models Weather-resistant finish withstands rain, salt, and UV Professional-grade adhesive and stainless steel hardware Clean, modern profile enhances rear visual depth Enhanced aerodynamic geometry aids downforce No drilling required—adhesive or bolt-on installation Maintains OEM paint compatibility and panel gaps Backed by our 30-day money-back guarantee Proudly stocked by Victorious Automotive since 2019 Compatibility Model & Year Generation Status Range Rover Sport 2014–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 Not Compatible Range Rover Sport 2010–2013 L320 Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Check your VIN or chassis plate before ordering. We're here to confirm compatibility: +44 203 943 9919, Mon–Fri 9am–7pm. Installation Difficulty: Moderate | Time: 45–90 minutes Prepare the surface: Clean the tailgate's lower edge thoroughly with isopropyl alcohol. Let dry completely (10 minutes). Test fit: Position the lip without adhesive to verify alignment with the tailgate and body line. Mark any final adjustments. Apply adhesive: Using the supplied heavy-duty automotive tape or adhesive beads, apply to the rear mounting surface of the lip. Secure fasteners: If using bolt-on method, drill pilot holes and install stainless steel fasteners hand-tight, then torque to 8 Nm. Press and hold: Press the lip firmly onto the tailgate for 60 seconds to ensure full adhesive contact. Cure time: Allow 24 hours before exposing to water or vehicle movement for maximum adhesive strength. Professional Installation Recommended: If you're unfamiliar with carbon fiber fitment or adhesive application, book a professional installer. Poor alignment can compromise aesthetics and water sealing. Victorious can recommend approved fitters in your region—call us. Why Choose This Spoiler Carbon fiber isn't just about weight savings—it's about permanence. Unlike paint-matched plastic lips that fade and crack, genuine carbon fiber deepens in character, resists salt spray, and requires nothing more than occasional water rinse and a soft cloth. The L494 Sport is already aggressive. This lip simply completes that story, adding a contemporary accent that signals refinement without shouting. It pairs beautifully with black window trim, darkened lights, or a full aero package. Ready to Elevate Your Sport? Authentic carbon fiber. Direct fit. 30-day guarantee. Worldwide shipping via DHL, FedEx, or UPS. Shop Carbon Fiber Tailgate Lips Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping included +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Product compatibility information is provided in good faith for reference only; always confirm fitment with your vehicle's specific year, chassis code, and configuration before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Hood Vents for Range Rover Sport L494 Genuine carbon fiber vents that enhance cooling airflow while adding understated motorsport styling to your L494. L494 2014–2020 Carbon Fiber Direct Fit Engine Cooling Overview The Range Rover Sport L494 (2014–2020) is a dynamic performance SUV that demands equally compelling aesthetics. These carbon fiber hood vents are engineered to replace your OEM vents with genuine, lightweight carbon fiber units that enhance both form and function without compromise. Beyond visual impact, these vents facilitate active heat dissipation from the engine bay, supporting cooler running temperatures during sustained driving and towing. The purposeful design integrates seamlessly with the L494's existing bonnet geometry, requiring no modification or custom drilling—installation is a straightforward bolt-on upgrade. Finished in premium gloss carbon weave, they deliver the same material and precision you'd find on motorsport vehicles, elevating your Range Rover's presence while delivering tangible thermal benefits. What's Included 🏁 Carbon Fiber Hood Vents (Pair) Left & right, gloss finish, ready to install 🔧 Stainless Steel Fasteners All hardware required for direct fit 📋 Installation Guide Step-by-step instructions included Product Highlights 100% genuine carbon fiber construction with superior strength-to-weight ratio Gloss finish carbon weave for factory-quality aesthetic Engineered for direct fit with no modifications required Improves engine bay cooling and thermal management Adds motorsport visual character to your L494 Lightweight alternative to OEM plastic vents Durable resin matrix resists UV degradation Includes all stainless steel fasteners and hardware Simple hand-tool installation (no welding or drilling) Backed by our 30-day money-back guarantee Compatibility Model Year Range Fit Status Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2010–2013 Not Compatible Always verify your model year and chassis code before ordering. Check your V5C registration document or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure. Installation Difficulty: Easy · Time: 30–45 minutes Park your Range Rover on a level surface and allow the engine to cool fully. Locate the factory hood vents on either side of the bonnet, just aft of the windscreen frame. Unscrew the three fasteners securing each OEM vent using a T25 Torx driver. Carefully lift and remove the original plastic vents, noting the gasket location. Clean the vent mounting surface with a microfiber cloth to remove any debris or residue. Position each carbon fiber vent, ensure alignment with the bonnet profile, then insert the stainless steel fasteners. Tighten each fastener progressively and evenly to 8 Nm (6 ft-lb) using a torque wrench. Step back and inspect both vents for flush alignment and consistent gaps. Your new carbon fiber hood vents are now active and ready to enhance cooling and styling. Professional Installation Recommended: If you prefer not to install these yourself, our network of Victorious-certified technicians can fit them in approximately one hour. Contact us for installer availability in your region. Complete Your L494 Upgrade Carbon fiber hood vents are the signature finishing touch for a purposefully styled Range Rover Sport. Pair them with our carbon fiber splitters, side skirts, or diffusers to elevate your L494's entire exterior presence. Explore L494 Collection Order today and use code 22GET20 to unlock 20% off when you purchase any two Victorious items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Jaguar Land Rover Limited, the official manufacturer of Range Rover, Defender, Land Rover, and Discovery vehicles. All product names, logos, and brands remain the property of their respective owners. This product is designed, manufactured, and distributed by Victorious Automotive in accordance with all applicable automotive and safety standards.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Side Vents for Range Rover Sport L494 Lightweight carbon fiber side vents that sharpen your Sport's profile while improving aerodynamic flow. L494 2018–2020 Carbon Fiber Aerodynamic Direct Fit Overview The Range Rover Sport L494 is engineered for dynamic performance and refined aesthetics. These carbon fiber side vents build on that DNA by adding visual aggression and functional ventilation to your Sport's flanks, instantly elevating its presence on any road. Our carbon fiber vents are constructed from genuine, waterproof material and engineered for direct fit installation. They integrate seamlessly with the OEM body line, creating a cohesive, purposeful look that speaks to your attention to detail. The lightweight construction preserves your Sport's performance without unnecessary weight. Whether you're refining your Sport's stance or preparing for a full aerodynamic upgrade, these vents are the foundation of a truly distinctive appearance. What's Included 🎁 2 × Carbon Fiber Side Vents One pair, driver + passenger side 📋 Installation Guide Step-by-step instructions included ✓ Adhesive Backing Pre-applied for quick, secure fit 📦 Protective Packaging Damage-free delivery guaranteed Product Highlights 100% genuine carbon fiber construction Waterproof and UV-resistant finish Seamless direct fit for L494 (2018–2020) Lightweight design preserves performance Enhances aerodynamic flow Pre-installed adhesive backing No drilling or modifications needed OEM-matched body integration Professional appearance, DIY installation Backed by 30-day money-back guarantee Compatibility Model Year Range Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Verify your vehicle's model year and body code before ordering. These vents are engineered exclusively for the L494 generation (2018–2020). If you own a different generation, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) for alternatives. Installation Difficulty: Beginner | Time: 15–20 minutes Prepare the surface. Clean both sides of your Sport's body with isopropyl alcohol and allow to dry completely. This ensures optimal adhesive contact. Position the vents. Dry-fit each vent on its respective side (driver/passenger) to verify alignment with the body line. Apply the vents. Carefully peel back the adhesive backing and press firmly from top to bottom, working out any air bubbles. Set and cure. Allow 24 hours of cure time before washing or exposing the vents to moisture. Inspect edges. Check all perimeter edges for secure adhesion. Use heat from a heat gun if needed to improve bond strength in cold conditions. Important: Ensure your Sport's body surface is clean and dry before installation. Installation in temperatures below 10°C may reduce adhesive strength—wait for warmer conditions if possible, or use a heat source to warm the application area. Complete Your L494's Look Carbon fiber side vents are the finishing touch that transforms your Range Rover Sport from standard to standout. Pair them with our matching aerodynamic upgrades for a fully integrated, purposeful aesthetic. Shop Range Rover Sport L494 Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day money-back guarantee 📦 Worldwide DHL, FedEx, UPS, TNT shipping ☎️ +44 203 943 9919 – Expert support Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover (JLR). All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for the specified vehicle model(s) and is not an OEM product.

Victorious Automotive · Range Rover Sport L494 · Lighting Aftermarket LED Rear Tail Light Assembly for Range Rover Sport L494 (2014–2020) — 2018 Facelift Style A direct-fit LED tail light upgrade that brings the sharper, more contemporary lighting signature of the post-facelift Sport to pre-facelift models — without modification. Range Rover Sport L494 2014–2020 LED Lighting ABS + PC 12V Facelift Style Direct Fit Pair Included CCC Certified LR116468 / LR116471 Overview The Range Rover Sport L494 remains one of Land Rover's most compelling performance SUVs — a vehicle that balances genuine off-road capability with a presence on the road that few rivals can match. Whether you're running a pre-facelift 2014–2017 model or the refreshed 2018–2020 version, the rear end is central to how the Sport is perceived from behind. These aftermarket LED tail light assemblies are engineered to the proportions and mounting points of the L494 platform, offering a direct replacement or a stylistic upgrade to the 2018 facelift LED light signature. The result is a cleaner, more modern rear graphic — with no cutting, no rewiring, and no compromises to build quality. Constructed from impact-resistant ABS and optically clear polycarbonate, they're built to endure the same conditions your Sport handles every day. For owners looking to modernise the rear aesthetic of an early L494, or simply replace a damaged unit with something that performs and looks better than the original fitment, these lights represent a considered, high-value upgrade. Full LED operation means faster illumination response and longer service life compared to conventional halogen units — two qualities that matter whether you're on a motorway or a mountain pass. What's Included 🔴 Left LED Tail Light Driver-side assembly — LR116468 🔴 Right LED Tail Light Passenger-side assembly — LR116471 🔩 Mounting Hardware All necessary fixings for installation 📄 Installation Guide Basic fitting reference document Product Highlights Direct-fit replacement for Range Rover Sport L494 (2014–2020) — no modification required Emulates the 2018 facelift LED rear light signature for a modernised appearance Full LED construction across all functions — brake, tail, indicator, reverse Faster illumination response versus halogen for improved road safety ABS + polycarbonate construction resists impact, UV degradation and weathering 12V direct operation — plug-and-play with standard L494 wiring looms CCC certified — meets required electrical and safety standards Supplied as a matched pair — left and right included in every order Part references LR116468 (left) and LR116471 (right) for easy cross-referencing Lightweight at 3kg total — no impact on vehicle dynamics or boot access Compatibility Model Code Year Range Trim / Notes Fitment Range Rover Sport L494 2014–2017 Pre-facelift — upgrade to facelift style Direct Fit Range Rover Sport L494 2018–2020 Facelift — like-for-like replacement Direct Fit Range Rover Sport L461 2022–2026 New generation platform — different architecture Not Compatible Range Rover Vogue L405 2013–2021 Different body and mounting points Not Compatible Range Rover Velar L560 2017–2023 Distinct rear light architecture Not Compatible Defender L663 2020–2026 Entirely different platform and format Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–75 minutes  ·  Tools: Standard trim tools, T20 Torx driver Open the boot and locate the interior trim panel behind each tail light cluster — carefully remove it using a trim pry tool to avoid damaging the lining. Disconnect the factory wiring connector from the existing tail light assembly by pressing the release tab and pulling the plug clear. Remove the retaining nuts (typically T20 Torx) securing the light unit to the body — there are usually three or four per side. Carefully withdraw the original light assembly from the rear of the vehicle, taking care not to scratch the surrounding bodywork. Align the new LED tail light unit with the mounting studs, ensuring the weatherstrip seal sits flush against the body panel before tightening. Reconnect the wiring loom connector until it clicks firmly into place, then refit the interior trim panel. Before closing the boot, test all functions — brake, tail, indicator, and reverse — to confirm full operation on both sides. ⚠ Important: If your vehicle displays a bulb failure warning after installation, this may be due to the lower current draw of LED units versus the original halogen lamps. A load resistor or LED-compatible flasher relay may be required to resolve this. Professional installation is recommended if you are unfamiliar with automotive electrical systems. Upgrade Your Sport's Rear End The right lighting upgrade changes how your Range Rover Sport is perceived — day and night. Browse the full L494 accessory range or get in touch with our team if you have compatibility questions. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, authorised by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and part numbers referenced on this page are used solely for compatibility identification purposes. This product is an aftermarket part and is not a genuine Land Rover OEM component.

Victorious Automotive · Range Rover Sport L494 & Vogue L405 · Exterior Styling Carbon Fiber Side Mirror Caps for Range Rover Sport L494 & Vogue L405 (2013–2020) Precision-formed real carbon fiber mirror covers that replace your factory housings with a race-inspired finish — no drilling, no cutting, no compromise. Range Rover Sport L494 Range Rover Vogue L405 2013–2020 Real Carbon Fiber Direct Fit Pair Included No Modifications Exterior Styling Overview The Range Rover Sport L494 and Vogue L405 are two of the most commanding vehicles on the road — refined, capable, and unmistakably purposeful. For owners who want to sharpen that presence without altering the fundamental character of the vehicle, the details matter enormously. The side mirrors are one of the most visible exterior elements, and upgrading them is one of the highest-impact styling modifications you can make. These carbon fiber mirror caps are engineered specifically for 2013–2020 Range Rover Sport (L494) and Range Rover Vogue (L405) models. Each cap is formed from genuine woven carbon fiber — not vinyl wrap, not a printed finish — giving you the authentic weight reduction and structural rigidity that real carbon fiber delivers. The gloss finish draws light in a way that painted or plastic OEM caps simply cannot match, adding visual depth and a motorsport-influenced edge to your vehicle's exterior. Designed as a direct replacement for the factory mirror housings, these caps clip cleanly into place using the original mounting points. There's no need to source specialist tools or modify your vehicle in any way. For owners of the Sport who run a black pack or gloss trim, or Vogue owners looking to contrast against factory colours, the carbon weave provides an understated premium upgrade that holds its own at any level of specification. What's Included 🪞 Carbon Fiber Mirror Cap — Driver Side Left-hand mirror housing cover, fully formed carbon fiber 🪞 Carbon Fiber Mirror Cap — Passenger Side Right-hand mirror housing cover, matching carbon weave 🔧 Fitting Hardware All required clips and fasteners for OEM-style installation 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine woven carbon fiber construction — not vinyl, not film High-gloss clear coat lacquer finish for long-term UV protection Direct OEM replacement — no cutting or drilling required Lightweight design reduces unsprung mass versus factory plastic caps Precision-moulded to match factory contours and panel lines exactly Compatible with both LHD and RHD vehicle configurations Designed for both Range Rover Sport L494 and Vogue L405 platforms Resistant to fading, chipping, and general road debris impact Supplied as a matched pair for a consistent finish on both sides Complements gloss black, SVR, and Black Pack exterior specifications Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you are unsure of your vehicle's code or build year, please contact us at +44 203 943 9919 before ordering. Installation Notes ⏱ Estimated Time: 20–40 minutes  |  🔧 Difficulty: Beginner–Intermediate Ensure the vehicle is parked on a level surface with the engine off. Allow the mirror housing to cool if the vehicle has been driven recently. Using a plastic trim removal tool, carefully prise the existing factory mirror cap away from the mirror housing — work from the lower edge inward to avoid scratching the door panel. Disconnect any wiring harness connectors if your factory cap integrates indicators or puddle lights. Note connector orientation before removal. Transfer any necessary internal clips or brackets from the OEM cap to the new carbon fiber cap as directed in the installation guide. Align the new carbon fiber cap with the mirror housing, ensuring all locating tabs engage correctly before pressing firmly to clip into place. Reconnect any wiring connectors and test indicator and puddle light functions if applicable before completing installation on the second side. Stand back and confirm even panel alignment and consistent fitment on both driver and passenger sides before driving. ⚠ Note: Professional installation is recommended if your vehicle features integrated mirror indicators or heated glass wiring. Improper removal of the factory cap can damage underlying mirror housing clips. Victorious Automotive accepts no responsibility for damage caused during DIY installation. Upgrade Your Range Rover the Right Way At Victorious Automotive, every product we stock is chosen specifically for Land Rover and Range Rover owners who demand more from their vehicles. These carbon fiber mirror caps are the kind of detail that separates a well-specced Sport or Vogue from everything else on the road. Shop Range Rover Sport Accessories Shop Range Rover Vogue Accessories Buying two items? Save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔁 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Range Rover Sport L494 Carbon Effect Side Vents – 2014–2017 Sharpen the side profile of your L494 Sport with precision-fit carbon effect side vents — a direct OEM-replacement upgrade that delivers genuine visual impact without modification. L494 2014–2017 Carbon Effect ABS Side Vents Pair Included Direct Replacement Exterior Styling Overview The Range Rover Sport L494 is one of the most purposeful SUVs ever produced — a vehicle that balances genuine off-road capability with athletic, road-focused intent. Its wide front flanks and sculpted bodywork make it a natural canvas for exterior upgrades, and the side vents are one of the most visible and character-defining elements of the front quarter panels. These carbon effect side vents are engineered specifically for the 2014–2017 Range Rover Sport L494. Crafted from high-quality ABS plastic with a carbon fibre-style finish, they slot directly into the factory vent apertures — no cutting, no drilling, no permanent modification required. The result is a more aggressive, motorsport-influenced aesthetic that feels entirely at home on the Sport's dynamic bodywork. Supplied as a matched pair — left and right — these vents offer a consistent, symmetrical upgrade across both sides of the vehicle. Whether you're refreshing tired factory trim or simply elevating the Sport's exterior presence, this is a clean, considered modification with a result that punches well above its price point. What's Included 🔲 Left Side Vent Carbon effect ABS — driver's side 🔲 Right Side Vent Carbon effect ABS — passenger's side Product Highlights Designed exclusively for Range Rover Sport L494 2014–2017 Carbon fibre-effect finish for a premium, motorsport aesthetic High-quality ABS construction — durable and lightweight Direct OEM-replacement fitment — no modification needed Supplied as a matched left and right pair Consistent finish across both sides of the vehicle Strict quality control standards applied at manufacture Enhances the Sport's aggressive front quarter styling Ideal for refreshing faded or damaged factory vents Professional installation recommended for best results Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014 – 2017 Direct Fit Range Rover Sport L494 2013 Verify Before Purchase Range Rover Sport L494 2018 – 2022 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Vogue L405 2013 – 2020 Not Compatible Range Rover Vogue L460 2022 – 2026 Not Compatible Range Rover Velar L560 2018 – 2022 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Trim removal tools, clean cloths Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work. Using a plastic trim removal tool, carefully pry the existing factory side vent away from the front quarter panel aperture, working around the retaining clips to avoid cracking the surrounding trim. Once the original vent is free, clean the aperture area thoroughly to remove any adhesive residue, dust, or debris. Align the new carbon effect vent into the aperture, ensuring all retaining tabs are correctly positioned before applying pressure. Press firmly and evenly around the perimeter of the vent until all clips engage and the vent sits flush with the surrounding bodywork. Repeat the process on the opposite side, checking that both vents sit symmetrically and flush before completing the installation. Please note: No instructions are included with this product. Professional installation is recommended. Victorious Automotive accepts no liability for damage caused during fitting. If you are unsure, consult a qualified automotive technician or bodywork specialist. Complete Your L494 Sport's Look Explore our full collection of exterior and interior upgrades designed specifically for the Range Rover Sport L494 — curated by enthusiasts, for enthusiasts. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Front Centre Grille Insert — Range Rover Sport L494 (2018–2019) A precision-cut carbon fibre grille insert engineered exclusively for the 2018–2019 Range Rover Sport, delivering a purposeful, track-inspired aesthetic with zero compromise on fitment or finish. Range Rover Sport L494 2018–2019 Carbon Fibre Front Grille Insert Exterior Styling Direct Fit CE Certified Model: SJC-HD251 Lightweight Overview The 2018–2019 Range Rover Sport L494 occupies a rare space — a vehicle that feels equally at home on a city boulevard or a fast-flowing back road. It is a machine defined by presence, and the front end is the first thing anyone sees. The factory grille, while refined, leaves room for those who want their Sport to read as something a little more serious. This carbon fibre front centre grille insert is designed to sit directly within your existing grille aperture, replacing the standard infill with a woven carbon surface that immediately shifts the visual weight of the vehicle's nose. The result is subtler than a full grille replacement but no less impactful — the deep, layered texture of real carbon fibre catches light in a way that painted or chrome finishes simply cannot replicate. Manufactured from high-grade carbon fibre composite with a clear-coated gloss finish, the insert is both lightweight and structurally sound. It has been dimensioned specifically to the L494 facelift-era Sport front end, ensuring the fitment is clean and precise rather than approximate. If you're building a cohesive exterior look or simply want to elevate one key detail, this is a straightforward, high-return modification. What's Included 🪟 Front Centre Grille Insert × 1 Carbon fibre composite, gloss clear-coat finish, model SJC-HD251 📦 Protective Packaging Foam-wrapped and boxed for safe international transit Product Highlights Genuine carbon fibre composite construction — not a printed or wrapped finish Gloss clear-coat topcoat for UV resistance and long-term surface protection Precision-cut to match the L494 Sport front grille aperture dimensions exactly Lightweight material reduces negligible added mass at the front end Deep woven weave pattern visible under all lighting conditions Replaces the standard infill section for a clean, factory-integrated appearance CE certified — meets applicable European product safety standards Compatible with both standard and SVR-adjacent front end configurations (2018–2019) Dimensions: 110cm L × 30cm H × 11cm W — no trimming required for direct fitment Pairs well with carbon mirror caps, bonnet vents, and rear diffuser upgrades Compatibility Vehicle Model Code Year Range Fitment Range Rover Sport L494 2018–2019 Direct Fit Range Rover Sport L494 2013–2017 Verify Before Ordering Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes  ·  Professional Installation Recommended Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the front end. Using appropriate trim removal tools, carefully disengage the factory grille assembly from the front bumper. Refer to a workshop manual or online guide specific to the 2018–2019 L494 Sport for clip locations. Remove the existing centre grille infill panel from the grille frame. This is typically retained by press-fit clips along the perimeter — work around the edges methodically to avoid cracking the surrounding surround. Offer up the carbon fibre insert and confirm alignment within the aperture before committing to fitment. Check all edges sit flush with the surrounding frame. Secure the insert using the original clip points or a suitable automotive-grade adhesive trim tape where clips are not retained. Ensure the surface is clean and dry before applying any adhesive. Refit the grille assembly to the bumper, confirming all clips and retaining points are fully seated before stepping back to inspect the finished result. ⚠ Note: Installation instructions are not included with this product. If you are not confident working with front bumper assemblies or trim components, we strongly recommend entrusting this installation to a qualified automotive technician or body shop familiar with Land Rover vehicles. Built for Range Rover Sport Owners Who Mean It Every component we stock at Victorious is chosen with one type of owner in mind — someone who knows their vehicle well, expects quality, and won't accept compromise. This carbon fibre grille insert is exactly that kind of part: understated, precise, and built to last. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fibre Side Vents — Range Rover Sport L494 (2014–2017) A sharp, purposeful exterior upgrade — carbon fibre look side vents purpose-built for the pre-facelift Range Rover Sport L494, fitting cleanly in place of the factory originals with zero modification required. L494 2014–2017 Carbon Fibre Look Side Vents Exterior Styling Direct Fit DIY Install Pre-Facelift Overview The Range Rover Sport L494, produced from 2013 through to the 2017 model year, is one of the most visually commanding SUVs to have emerged from Solihull. Its wide-set stance, raked roofline and sculpted flanks reward owners who pay close attention to the details — and few areas offer a more impactful upgrade opportunity than the side vents sitting just behind the front wheels. These carbon fibre look side vents are designed as a direct, like-for-like replacement for the factory items on pre-facelift L494 Sport models. Finished in a high-quality carbon look weave, they replace the standard units instantly — adding a performance aesthetic that references the Sport's motorsport-inspired character without the weight or cost of full dry carbon. The result is a subtle but unmistakable visual shift: darker, more defined flanks that complement the Sport's already aggressive profile. Whether paired with gloss black accessories or left to contrast against the factory body colour, these vents read as a considered, enthusiast-led choice rather than an afterthought. What's Included 🪶 Carbon Look Side Vents Pair (left & right), pre-facelift L494 specific fitment 🔩 Fitting Hardware All necessary clips and fixings for a secure OEM-style fit 📋 Fitment Guide Step-by-step installation reference included 📦 Protective Packaging Foam-lined box to ensure safe delivery in transit Product Highlights Purpose-built fitment for L494 Range Rover Sport 2014–2017 only Carbon fibre look finish — high-gloss weave aesthetic Direct OEM replacement — no cutting, drilling or modification Sold as a pair — both driver and passenger side included Lightweight construction — negligible weight addition Compatible with all trim levels across the 2014–2017 model range DIY-friendly installation — achievable in under 30 minutes Complements gloss black, carbon, and dark chrome exterior packs Precision-moulded for flush, factory-finish panel alignment Durable finish resistant to UV fading and weathering Compatibility Model Code Year Range Fit Range Rover Sport L494 2013–2017 (Pre-Facelift) Direct Fit Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible ⚠ Important Fitment Note: These vents are designed exclusively for the pre-facelift Range Rover Sport L494 (2013–2017). The 2018 facelift and all subsequent models feature a revised front bumper and vent surround design — these parts will not fit and should not be ordered for those vehicles. If you are unsure of your exact model year or build, please contact our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool, soft cloth Park on a level surface and ensure the vehicle is switched off. Allow the engine bay to cool if recently driven. Using a plastic trim removal tool, carefully unclip the factory side vent from the bumper surround. Work around the perimeter to release all retaining clips without marking the bodywork. With the original vent removed, clean the mounting recess with a soft cloth to remove any debris or residue before fitting the new unit. Align the carbon look vent into position, ensuring all clip points are correctly located before applying gentle, even pressure to seat each clip fully. Repeat on the opposite side. Run a finger around the perimeter of each vent to confirm a flush, even fit with no gaps or proud edges. Step back and inspect both sides for alignment. Clean the finish with a detailing cloth to remove any fingerprints before driving. ⚠ Tip: A plastic pry tool rather than a metal screwdriver is strongly recommended to avoid scratching the bumper surround during clip removal. Take your time on the first side — the second will feel significantly easier once you understand the clip pattern. Upgrade Your Sport the Right Way These carbon fibre look side vents are one of the quickest and most impactful exterior changes you can make to your pre-facelift Range Rover Sport L494. Explore the full range of Sport exterior accessories at Victorious — built specifically for owners who know the difference. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 Expert advice Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Front Grille Replacement for Range Rover Sport L494 (2014–2017) A bold, precision-formed ABS grille in high gloss black — designed to replace your factory unit and immediately sharpen the front-end presence of your Range Rover Sport. Range Rover Sport L494 2014–2017 High Gloss Black ABS Construction Direct Replacement No Drilling Required OEM-Style Fit Front Grille Overview The Range Rover Sport L494 (2014–2017) is a vehicle that strikes a careful balance between restrained British elegance and commanding road presence. The front grille is one of the most defining visual elements on the Sport — it frames the bonnet line, anchors the headlights, and sets the tone for the entire aesthetic. If your factory grille has become tired, damaged, or simply no longer reflects how you want your Sport to look, replacing it is one of the most impactful single modifications you can make. This High Gloss Black Front Grille has been engineered specifically for the Range Rover Sport L494 facelift and pre-facelift models produced between 2014 and 2017. Constructed from high-quality ABS thermoplastic, it replicates the geometry and mounting points of the original unit to the millimetre — allowing for a clean, rattle-free fitment without any modification to your vehicle's bodywork or wiring. The high gloss black finish adds a darkened, contemporary edge that complements the Sport's inherently athletic character. Whether you're refreshing a worn-out original or simply pursuing a blacked-out front-end aesthetic, this grille delivers a meaningful visual upgrade with a straightforward installation process. It's the kind of detail that separates a cared-for Sport from everything else on the road. What's Included 🔲 High Gloss Black Front Grille 1x full replacement grille unit — pre-assembled and ready to fit 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Engineered exclusively for Range Rover Sport L494 (2014–2017) — no universal-fit compromise High gloss black ABS finish delivers a premium, showroom-quality appearance Direct OEM replacement — uses all factory mounting points and clips No drilling, cutting, or bodywork modification required Durable ABS thermoplastic construction resists impact, UV fade, and road debris Replicates original grille geometry for a seamless, rattle-free fit Suitable for both pre-facelift and mid-cycle Sport variants within the 2014–2017 window Complements blacked-out trim packages and SVR-inspired styling builds Lightweight construction — does not affect aerodynamic balance or air intake flow Tool fitment achievable with standard workshop tools in under an hour Compatibility Vehicle Code Years Trim / Notes Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport L494 2013 First model year — grille surround differs Verify Before Purchase Range Rover Sport L494 2018–2022 Post-facelift — revised grille architecture Not Compatible Range Rover Sport L461 2022–2026 New generation — entirely different platform Not Compatible Range Rover Vogue L405 2013–2021 Different grille design and dimensions Not Compatible Range Rover Velar L560 2018–2022 Closed-face grille — not applicable Not Compatible Installation Notes Difficulty: Beginner · Estimated Time: 30–60 minutes · Tools Required: Trim removal tools, T20 Torx driver Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for improved access to the upper grille mounting points. Using a plastic trim removal tool, carefully prise the existing grille away from the bumper surround, starting from the outer edges and working inward to disengage the retaining clips without cracking the bumper fascia. Locate and remove any Torx screws (typically T20) securing the grille to the upper bumper bracket. Keep all hardware — some clips and screws may be reused during installation of the new unit. Fully remove the original grille and set aside. Clean the mounting recess with a dry cloth to remove any accumulated road grime before fitting the replacement. Align the new High Gloss Black Grille with the factory aperture, ensuring all clip housings are correctly positioned against their corresponding receptacles in the bumper surround. Apply firm, even pressure across the grille face to engage all retaining clips simultaneously. Refit any Torx screws removed in step 3 and torque to hand-tight. Inspect the grille perimeter to confirm uniform gaps and a flush fit against the bumper. Close the bonnet and step back to confirm alignment from distance before driving. ⚠ Important: Always use plastic trim removal tools — metal tools risk permanent scratching of the bumper paint and grille finish. If your vehicle has a front parking sensor cluster integrated into the grille surround, verify sensor positioning and clearance after fitment before driving at speed. When in doubt, consult a qualified automotive technician. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product we stock is chosen with one type of customer in mind — the owner who genuinely cares about their vehicle. If you have any questions about fitment, finish compatibility, or combining this grille with other exterior styling parts for your L494 Sport, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 5 & Range Rover · Exterior Trim Carbon Fiber Door Handle Covers for 2017–2021 Land Rover Discovery 5 & Range Rover A precision-fit carbon fiber upgrade that transforms your door handles into a visual focal point — no paint, no professional fitting, no compromise. Discovery 5 L462 Range Rover L405 2017–2021 Real Carbon Fiber 3M Adhesive Fit UV Resistant Set of 4–8 No Drilling Overview The 2017–2021 Land Rover Discovery 5 and Range Rover are vehicles built with a clear design language — commanding, considered, and refined. The door handles, while functional, are one of the few exterior details that benefit most from a well-chosen upgrade. These carbon fiber door handle covers are engineered specifically for that purpose: to close the gap between factory specification and the kind of finish that turns heads at a standstill. Each cover is crafted from genuine carbon fiber with a high-gloss lacquer finish, capturing the distinctive woven texture that carbon fibre enthusiasts expect. Lightweight by nature yet rigid under daily use, the material resists UV degradation, moisture ingress, and the kind of road debris that dulls lesser finishes over time. The result is a component that looks purposeful and performs quietly — exactly how a Land Rover owner prefers it. Fitment is handled via pre-applied 3M automotive-grade adhesive tape, meaning the entire installation process takes place on your driveway without tools, specialists, or risk to your vehicle's paintwork. Whether you're refining a daily driver or building a specification-level Discovery 5, these covers deliver a noticeable visual step-up with minimal effort required. What's Included 🪶 Carbon Fiber Door Handle Covers Set of 4–8 covers depending on configuration; genuine carbon fiber with gloss lacquer 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade 3M tape bonded to each cover for a clean, tool-free installation 📄 Installation Guide Step-by-step instructions for a professional finish from first attempt 🧹 Surface Prep Wipe Included cleaning wipe to degrease door handle surfaces prior to fitting Product Highlights Genuine carbon fiber construction — not ABS with carbon-look wrap High-gloss lacquer protects the weave and adds depth to the finish UV-resistant coating prevents fading, yellowing, or surface degradation Waterproof and resistant to road grime, bird lime, and light impacts Lightweight profile adds no meaningful weight to your door panels No drilling, cutting, or modification to your vehicle required 3M automotive adhesive provides a permanent, weather-proof bond Precision-moulded to follow the exact contour of Discovery 5 handles Compatible with both 4-door and extended configurations as applicable Brand new — supplied in protective packaging, ready to install Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2022 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 / L551 2011–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your vehicle in a dry, sheltered environment. A garage or covered driveway is ideal — avoid fitting in direct sunlight or cold temperatures below 10°C as this affects adhesive performance. Thoroughly clean each door handle with the included prep wipe, removing all grease, wax, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit each carbon fiber cover to its corresponding handle to confirm alignment and coverage. Each cover is shaped to a specific position — take a moment to familiarise yourself before committing. Peel the backing from the 3M adhesive tape on the underside of the first cover. Align the cover carefully to the handle, press firmly from the centre outward, and hold for 30–60 seconds to activate the bond. Repeat for all remaining covers. Do not wash the vehicle or expose the adhesive to water for at least 24 hours following installation to allow full cure. ⚠ Important: Confirm your exact vehicle variant and year of manufacture before ordering. Handle profiles can vary between model years and trim levels. If you are unsure of compatibility, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Upgrade Your Discovery or Range Rover Today Join over 12,300 verified Land Rover and Range Rover owners who trust Victorious Automotive for premium exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purposes of fitment identification. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Red & Black Side Vents for Range Rover Sport L494 (2014–2017) A bold, direct-fit exterior upgrade that replaces the factory side vents with a striking red and black finish — adding a performance-inspired edge to the L494 Sport's silhouette. Range Rover Sport L494 2014–2017 High-Grade ABS Red / Black Finish Direct Fit Pair Included Exterior Styling Overview The Range Rover Sport L494 is one of the most visually commanding SUVs on the road — athletic proportions, a wide stance, and a face that means business. For owners of the 2014 to 2017 model year, the factory side vents are functional but understated. If you're looking to sharpen the Sport's aesthetic and inject a touch of motorsport character, these red and black side vents are a purposeful and considered upgrade. Manufactured from high-grade ABS plastic, these vents are engineered as a direct replacement for the OEM units. The dual-tone red and black colourway adds visual drama without overwhelming the Sport's existing design language — it's the kind of detail that reads as intentional, not afterthought. Whether you're building a distinctive daily driver or looking to complement a wider exterior styling package, these vents deliver a clean, premium result. Each set is produced to strict quality control standards, ensuring consistent fitment and finish. The ABS construction is resistant to UV degradation and general weathering, meaning this upgrade is built to look sharp beyond the first week of fitting. What's Included 🔲 Left Side Vent Driver's side direct-fit replacement 🔲 Right Side Vent Passenger's side direct-fit replacement Product Highlights Direct OEM replacement — no cutting or modification required High-grade ABS construction for long-term durability Bold red and black dual-tone finish UV-resistant material — resists fading over time Strict quality control across build and finish testing Supplied as a matched left and right pair Lightweight design — no added stress to bodywork Complements aftermarket wheel, grille, and body kit upgrades 100% brand new — not refurbished or reconditioned Fits all trim levels of the L494 Sport (2014–2017) Compatibility Model Code Years Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (Pre-facelift) Verify Before Ordering Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, plastic clips (if needed) Ensure the vehicle is parked on a flat surface with the engine off and fully cooled down before beginning. Using a plastic trim removal tool, carefully prise the existing OEM side vent away from the bodywork, working around the perimeter to release each retaining clip without damaging the surrounding paintwork. Disconnect any retaining clips or fixings holding the original vent in place and set aside for reference. Note the clip positions as the new vent uses the same mounting points. Offer up the new red and black side vent to the aperture, aligning it carefully with the mounting points before applying firm, even pressure to click each clip into place. Repeat the process on the opposite side, then step back and inspect both vents for flush fitment and consistent panel gaps before considering the job complete. ⚠ Please Note: No installation instructions are included with this product. If you are unsure about any stage of the fitting process, professional installation by a qualified automotive technician or detailer is strongly recommended to avoid damage to your vehicle's bodywork or trim. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product in our Range Rover Sport L494 collection is selected with the discerning owner in mind. If you have any questions before purchasing, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop Range Rover Sport L494 Collection Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Climate Control Upgrades Rear Climate Control Screen Upgrade — Range Rover Sport L494 2014 to 2018 Style Refresh Transform your 2014 Range Rover Sport's rear AC dials into the refined 2018 aesthetic with this direct plug-and-play panel upgrade — no wiring, no coding, no compromise. Range Rover Sport L494 2014 Upgrade to 2018 Plug & Play Rear Climate Control 4 Finish Options No Coding Required Black / Carbon / Wood Grain Interior Upgrade Overview The Range Rover Sport L494 underwent a significant interior refresh during its mid-cycle update, with the revised 2018 cabin introducing a noticeably more sophisticated rear climate control panel. If you own an earlier 2014–2016 Sport, the difference in aesthetic quality between your current rear AC controls and the updated 2018 design is one of those details that, once noticed, is difficult to ignore — particularly if you've spent time in a newer example. This upgrade panel is a direct-fit replacement for the rear climate control dials on the Range Rover Sport L494 (2014 model year), designed to bring the appearance of your cabin in line with the 2018 facelift specification. Available in four distinct finishes — gloss black, carbon fibre, red wood grain, and black wood grain — each option allows you to tailor the upgrade to suit your existing interior trim level and personal taste. Installation requires no specialist tools, no electrical modifications, and no dealer visit. The unit connects directly to your vehicle's existing harness using the original plug, making this one of the most straightforward interior upgrades available for the Sport. The result is a cleaner, more cohesive rear cabin environment that better reflects the quality of the vehicle you're driving. What's Included 🎛️ Rear AC Control Panel 2018-style upgrade unit in your chosen finish 🔌 OEM-Match Connector Direct plug-in — no adapters needed 🪛 Fitting Hardware All clips and fixings required for installation 📄 Installation Guide Step-by-step instructions included Product Highlights Direct plug-and-play fitment — no wiring modifications required Updates 2014 Sport interior to 2018 facelift specification appearance Available in four premium finish options to match your trim Gloss black finish suits SVR and HST specification interiors Carbon fibre finish adds a performance-oriented aesthetic Red wood grain suits Autobiography and luxury-spec cabins Black wood grain provides a subtle, sophisticated alternative All climate control functions fully retained post-installation No dealer coding or software update required Designed and quality-checked for the Range Rover Sport L494 Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2017 (Pre-facelift) Direct Fit Range Rover Sport L494 2018–2022 (Facelift) Already Updated Spec Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 Minutes  ·  Tools Required: Trim removal tool (optional) Ensure the vehicle ignition is off before beginning. Access the rear centre console trim panel housing the existing climate control unit. Using a trim removal tool or your fingers, carefully unclip the existing rear AC panel from the centre console surround. Apply even, gentle pressure to avoid marking adjacent trim surfaces. Disconnect the OEM wiring connector from the back of the existing unit by pressing the release tab and pulling firmly but carefully. Connect the new upgrade panel to the same OEM connector. You will hear or feel a positive click when fully seated. Align the new panel with the console aperture and press firmly into place until all retaining clips engage. Turn on the ignition and test all rear climate control functions — temperature, fan speed and direction — to confirm full operation. ⚠ Note: This product is designed specifically for pre-facelift Range Rover Sport L494 models from 2014 to 2017. Please verify your exact model year before ordering. If you are unsure, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for your specific vehicle. Upgrade Your Sport's Interior Today Bring your pre-facelift Range Rover Sport cabin up to 2018 specification with one of the most satisfying plug-and-play upgrades available. Explore the full range of Sport interior accessories at Victorious Automotive — trusted by over 12,300 Range Rover and Land Rover owners worldwide. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purposes of product compatibility identification.

Victorious Automotive · Range Rover L405 & L494 · Interior Upgrades 2018-Style Window Switch Upgrade Kit for Range Rover L405 & Sport L494 (2013–2017) Bring your pre-facelift Range Rover's interior into the modern era with a direct-fit 2018-style window switch set — no wiring, no cutting, no compromise. L405 2013–2017 L494 2013–2017 Direct Clip-On Fit Silver & Black Illuminated Buttons Push Button Switches Weather Resistant 4-Piece Set Overview The Range Rover L405 Vogue and Range Rover Sport L494 produced between 2013 and 2017 represent some of Land Rover's most accomplished vehicles — refined, capable, and effortlessly commanding on any road. Yet for owners who've spent time in a post-facelift 2018 model, one detail stands out immediately: the updated window switch panel. It's a small change that carries a noticeable visual weight, and it's exactly the kind of detail that separates a well-kept interior from one that's been truly elevated. This window switch upgrade kit delivers that 2018-onwards aesthetic to pre-facelift L405 and L494 owners without any permanent modification. The four-piece set replaces your existing door-mounted switch surrounds and buttons with the cleaner, more contemporary design introduced with the facelift — complete with illuminated black push buttons and a refined silver and black finish that feels native to the Range Rover interior. Engineered for a precise clip-on fit, this kit requires no drilling, no wiring changes, and no specialist tools. It preserves every function of your existing switches while delivering a meaningful visual upgrade to one of the most-used touchpoints in your cabin. Whether you're prepping for sale, refreshing a tired interior, or simply bringing your L405 or L494 in line with later-model aesthetics, this is one of the cleanest upgrades available at this price point. What's Included 🪟 Window Switch Set (×4) Full set of four door switches — driver, passenger, and rear pair 💡 Illuminated Black Buttons Built-in illumination on each switch for night-time visibility 📄 Installation Instructions Step-by-step guide included in the package Product Highlights Clip-on installation — no permanent modification to your vehicle 2018-style facelift aesthetic for pre-facelift 2013–2017 models Illuminated push buttons for clear night-time operation Silver and black dual-tone finish matches OEM interior palette High-quality materials with a durable, scratch-resistant surface Weather-resistant and corrosion-resistant construction Protects underlying switch surrounds from daily wear Full four-door coverage in a single kit Compatible with both L405 Vogue and L494 Sport platforms No tools required — installs in minutes per door Compatibility Model Platform Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Vogue L405 2018–2021 Not Required Range Rover Sport L494 2018–2022 Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 minutes  |  🛠 Tools Required: None Begin with the driver's door. Ensure your windows are fully closed and the ignition is off before starting. Gently prise the existing window switch panel from the door card using your fingers — no tools needed. Note the orientation of the existing switches. Align the new 2018-style switch unit over the existing switch housing, ensuring the button positions correspond correctly to the original layout. Press the new switch panel firmly into place until you hear and feel the clips engage on all four corners. Test each button to confirm all window functions operate correctly before moving to the next door. Repeat for the front passenger door and both rear doors using the appropriately sized switch units from the set. Once all four are fitted, cycle the ignition and verify illumination on all switches at night or in low light. ⚠ Important: Verify your exact model year and platform (L405 or L494) before purchasing. Switch panel designs can vary slightly between production runs. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility for your VIN. Elevate Every Detail At Victorious Automotive, we source accessories that respect your Range Rover as much as you do. This switch upgrade is the kind of quiet, considered improvement that owners notice every single day — and it takes under half an hour to fit. Shop More L405 & L494 Upgrades Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and platform references (including L405, L494, Range Rover, and Range Rover Sport) are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.