Products

Victorious Automotive · Land Rover Discovery 3 LR3 · Interior Accessories Aluminum Alloy Electronic Handbrake Cover for Land Rover Discovery 3 LR3 (2004–2009) A precision-cut, polished aluminium alloy handbrake cover that restores the interior quality of your Discovery 3 with a factory-premium finish and no-drill installation. Discovery 3 LR3 2004–2009 Aluminum Alloy Polished Silver Electronic Handbrake Interior Trim No-Drill Fit Direct Replacement Overview The Land Rover Discovery 3 — known in North America as the LR3 — remains one of the most capable and characterful SUVs Land Rover has ever produced. Built between 2004 and 2009, the Discovery 3 brought genuine off-road ability alongside a refined, purpose-built interior. Years on, that interior can show its age — particularly around high-contact trim areas like the electronic handbrake surround, where plastic dulls, scuffs, and warps under daily use. This aluminium alloy electronic handbrake cover is designed as a direct-fit upgrade for the Discovery 3 LR3, precisely profiled to sit flush over the OEM handbrake assembly without any modification to your vehicle. The polished silver finish is machined from high-grade aluminium alloy — a material chosen for its resistance to heat, wear, and the kind of incidental contact that destroys lesser interior trim pieces over time. Unlike generic interior accessories, this cover has been developed specifically for the Discovery 3's handbrake architecture. Installation is clean and straightforward using the included automotive-grade adhesive tape, leaving no trace on the original trim beneath. Whether you're restoring a well-used D3 or simply elevating a vehicle you plan to keep for years to come, this is a small detail that makes a meaningful difference every time you reach for the brake. What's Included 🔩 Handbrake Cover One-piece aluminium alloy unit, polished silver finish 🖇️ Adhesive Tape Pre-cut automotive-grade 3M-style mounting tape 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered specifically for the Discovery 3 LR3 electronic handbrake High-grade aluminium alloy construction — resistant to heat, wear, and daily use Polished silver finish complements the Discovery 3's interior trim palette No drilling, cutting, or permanent modification required Direct-fit profile ensures flush, seamless installation with no gaps Automotive adhesive tape included for a clean, rattle-free bond Lightweight yet rigid — adds substance without bulk Protects the original OEM handbrake surround from further wear Easily removable without damage if required at a later date Covers and conceals age-related scuffs and discolouration on existing trim Compatibility Vehicle Code Years Fitment Land Rover Discovery 3 LR3 / L319 2004 – 2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009 – 2016 Not Confirmed Land Rover Discovery 5 L462 2017 – Present Not Compatible Range Rover Sport L320 2005 – 2013 Not Compatible Range Rover Vogue L322 2002 – 2012 Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Ensure the electronic handbrake is fully engaged and the vehicle is parked on level ground before beginning. Thoroughly clean the surface of the existing handbrake surround using an isopropyl alcohol wipe or clean microfibre cloth. Remove all dust, grease, and moisture to ensure maximum adhesion. Allow the surface to dry completely — ideally for 2–3 minutes — before proceeding. Peel the backing from the included automotive adhesive tape and apply it evenly to the reverse side of the aluminium cover, following the profile of the piece. Carefully align the cover over the handbrake assembly, checking positioning before making contact with the surface. Once correctly aligned, press firmly and evenly across the entire surface for 30–60 seconds to activate the adhesive bond. Avoid operating the handbrake for at least one hour to allow the adhesive to fully cure. ⚠ Note: Do not install in cold or damp conditions — adhesive performance is reduced below 10°C. For best results, install indoors at room temperature. Do not use solvent-based cleaners on the aluminium surface as this may damage the polished finish. Upgrade Your Discovery 3 Interior At Victorious Automotive, every accessory we carry is selected to meet the standard Discovery 3 owners actually expect — not just what looks good in a product photo. This handbrake cover is a simple, lasting upgrade that makes a real impression every time you climb behind the wheel. Shop Discovery 3 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchasing.

Victorious Automotive · Range Rover L460 / L461 · Interior Upgrades Aluminum Alloy Steering Wheel Shift Paddles for Range Rover Vogue L460 & Sport L461 (2023+) Precision-machined aluminum shift paddles engineered to replace the factory units on the 2023 Range Rover Vogue L460 and Sport L461 — delivering a more tactile, performance-oriented driving feel without any permanent modification. Range Rover Vogue L460 Range Rover Sport L461 2023+ Aluminum Alloy Direct Fit No Drilling Required ISO9001 Certified Interior Upgrade Overview The 2023 Range Rover Vogue L460 and Range Rover Sport L461 represent the most advanced generation of Land Rover's flagship lineup — featuring refined interiors, sophisticated driver interfaces, and a level of cabin detail that owners rightly scrutinise. For drivers who prefer manual gear shifts via paddle control, the factory-fitted paddles can feel underwhelming relative to the overall quality of the cabin. These aluminum alloy replacements address that directly. Crafted from high-grade aluminum alloy and finished to complement the L460 and L461 interior palettes, these shift paddles are engineered as direct-fit replacements for 2023 model year vehicles. The increased surface area and solid metal construction offer a noticeably more positive click when changing gears — something that becomes particularly satisfying on winding roads or during spirited driving in Dynamic mode. Installation is a clean, tool-free process using pre-applied double-sided automotive-grade adhesive tape. There's no need to disassemble your steering column or interfere with any electronics. The paddles sit flush against the existing mounts and feel entirely at home in a cabin of this calibre — a subtle but meaningful upgrade that enthusiast owners immediately appreciate. What's Included 🏎️ Left Shift Paddle (–) Downshift paddle, aluminum alloy, pre-taped 🏎️ Right Shift Paddle (+) Upshift paddle, aluminum alloy, pre-taped 🔧 Pre-Applied Adhesive Automotive-grade double-sided tape included on each paddle 📦 Protective Packaging Paddles shipped in protective wrap to prevent transit damage Product Highlights Precision-machined from high-grade aluminum alloy for a solid, premium feel Direct-fit design for 2023 Range Rover Vogue L460 and Sport L461 No drilling, no wiring — installs with pre-applied adhesive tape Increased paddle surface area for more confident gear changes Substantial weight and click response compared to factory plastic units Finished to complement factory interior trims on L460 and L461 models 100% brand new — manufactured in ISO9001 certified facility Available in multiple colour finishes to suit your interior specification Compatible with Dynamic, Comfort, and Sport driving modes Fully reversible installation — no permanent modification to your vehicle Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L460 2023–2026 Direct Fit Range Rover Sport L461 2023–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2021 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🛠 Tools Required: None Begin with the steering wheel in its neutral (straight-ahead) position to give yourself the best access to both paddle areas. Thoroughly clean the surface of the existing factory shift paddles using an isopropyl alcohol wipe. Allow to dry completely before proceeding — this ensures maximum adhesive bond strength. Carefully peel the protective backing from the pre-applied double-sided adhesive tape on the reverse of the new aluminum paddle. Align the new paddle precisely over the factory paddle, ensuring it sits flush with no overhang on either edge. Press firmly and hold for 30–60 seconds to activate the adhesive bond. Repeat the process for the second paddle on the opposite side of the steering wheel. Leave the vehicle undisturbed for at least 2 hours before driving to allow the adhesive to fully cure and achieve maximum hold. ⚠ Important: These paddles are designed to overlay the existing factory paddle extensions. If your L460 or L461 is fitted with a heated steering wheel or any non-standard column configuration, verify fitment before installation. Do not apply to dirty, oily, or wet surfaces as this will significantly reduce adhesive performance. Upgrade Your L460 or L461 Interior Today Shop the full interior accessory range for your Range Rover Vogue L460 and Range Rover Sport L461 at Victorious Automotive — trusted by over 12,300 verified Range Rover owners worldwide. Shop Range Rover L460 Accessories Shop Range Rover Sport L461 Accessories Use code 22GET20  — 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Range Rover, Vogue, Sport, L460, and L461) are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Aluminum Alloy Center Console Mode Adjustment Button Trim for Land Rover Discovery 4 (2014–2016) Precision-machined aluminum alloy button trim that elevates the Discovery 4 center console with a refined, factory-premium finish — without a trip to the dealership. Discovery 4 2014–2016 Aluminum Alloy Center Console Mode Button Trim Interior Upgrade Silver Finish Direct Fit Overview The Land Rover Discovery 4 is one of the most capable and characterful SUVs ever produced — a vehicle that owners genuinely form a bond with. But years of daily use can leave the center console looking worn, particularly around the mode adjustment buttons where fingertip contact is constant. It's a small detail, but one that experienced Discovery owners notice immediately. These aluminum alloy mode adjustment button trim pieces are machined to match the exact geometry of the 2014–2016 Discovery 4 center console. Rather than the plastic finish that comes from the factory, you're replacing it with brushed aluminum alloy — a material choice that reads as a factory-grade upgrade rather than an aftermarket addition. The silver tone integrates naturally with the existing chrome and satin accents already present in the D4 interior. Beyond aesthetics, the alloy construction provides meaningful protection for the underlying switch housing. It resists scratching, doesn't fade, and won't show the fingerprint wear that plagues the factory trim over time. If you're refreshing a high-mileage interior or simply want your Discovery 4 to feel as composed on the inside as it performs on the outside, this is one of the most cost-effective upgrades available. What's Included 🔲 Button Trim Set Center console mode adjustment aluminum alloy surround, full set 🔧 Adhesive Backing Pre-applied fitment adhesive for secure, tool-free installation 📦 Protective Packaging Individually wrapped to prevent surface marking in transit Product Highlights Precision-machined aluminum alloy construction for genuine durability Brushed silver finish complements the Discovery 4 factory interior palette Custom-profiled to align perfectly with existing mode adjustment buttons Resists scratching, fading, and fingerprint wear over long-term use Pre-applied adhesive for a clean, tool-free installation process Adds a premium, factory-upgrade aesthetic without modification Protects underlying switch housing from further cosmetic wear Lightweight alloy construction — no impact on button tactile feel Reversible fit — can be removed cleanly without damaging trim panels Verified fitment for 2014, 2015, and 2016 Discovery 4 variants Compatibility Vehicle Year Range Variant Fitment Land Rover Discovery 4 2014–2016 All trim levels (SE, HSE, HSE Luxury) Direct Fit Land Rover Discovery 4 2009–2013 Pre-facelift models Verify Before Purchase Land Rover Discovery 3 2004–2009 All variants Not Compatible Land Rover Discovery 5 2017–2024 All variants Not Compatible Range Rover Sport L494 2013–2020 All variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Ensure the center console surface is clean and free of dust, grease, or residue. Use an isopropyl alcohol wipe and allow to dry fully before proceeding. Test-fit the trim piece over the mode adjustment button area without removing the adhesive backing to confirm correct orientation and alignment. Peel the adhesive backing carefully, taking care not to touch the adhesive surface with your fingers. Starting from one edge, press the trim firmly into position, applying consistent pressure across the full surface for 30–60 seconds to ensure full adhesion. Allow a minimum of 1 hour before regular use to allow the adhesive to cure fully and bond securely to the console surface. ⚠ Note: Ensure the console surface temperature is above 15°C (59°F) during installation for optimal adhesive performance. Avoid applying in direct sunlight or high humidity conditions. Do not attempt removal within the first 24 hours after fitting. Complete Your Discovery 4 Interior Browse our full range of Land Rover Discovery 4 interior accessories — from dashboard trim to gear surround finishers — each chosen to complement the character of your vehicle. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Range Rover Vogue L405 · Interior Trim Aluminum Alloy Central Air Conditioning Trim for Range Rover Vogue L405 (2018–2020) A precision-machined aluminium alloy upgrade that replaces the factory plastic climate control surround with a sculpted, weighted finish worthy of the Vogue's interior. Range Rover Vogue L405 2018–2020 Aluminum Alloy Silver / Red / Blue Direct Fit No Drilling Interior Trim Under 2 Min Install Overview The Range Rover Vogue L405 is one of the most accomplished luxury SUVs ever produced — a vehicle whose interior is expected to feel as considered and composed as the engineering beneath it. From the 2018 model year through to the final L405 run in 2020, Land Rover's flagship offered a level of refinement that very few vehicles can match. But the factory climate control surrounds, finished in standard plastic, remain one of the few areas where the cabin's premium ambition falls slightly short of its potential. This Aluminum Alloy Central Air Conditioning Trim is designed specifically to address that. Machined from high-grade aluminium alloy and available in Silver, Red, and Blue anodised finishes, it replaces the stock plastic surround around the central HVAC and audio controls with a component that feels genuinely substantial in the hand — and looks the part the moment you close the door. The heavier-weight construction gives it a solidity that plastic simply cannot replicate, while the precision fit ensures it sits flush with the surrounding dashboard architecture. Installation requires no tools, no drilling, and no modification to your vehicle's wiring or trim panels. The trim adheres via a purpose-fitted mounting system that holds securely across daily use and temperature variation. Whether you're refreshing a well-loved Vogue or adding a final detail to a recent purchase, this is one of the most immediate interior upgrades available for the L405 platform. What's Included 🧩 Central AC Trim Set Full surround for HVAC & audio control zone 🔧 Mounting Adhesive Strips Pre-applied, high-bond automotive-grade adhesive 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Protective Packaging Foam-lined box to prevent transit damage Product Highlights Precision-machined from high-grade aluminium alloy for genuine weight and rigidity Available in Silver, Red, and Blue anodised finishes to suit your interior Direct fit for Range Rover Vogue L405 2018–2020 — no modification required Installs in under 2 minutes with no tools, drilling, or panel removal Heavier-weight construction dramatically improves the tactile feel of the control zone Replaces the factory plastic surround for a more premium, cohesive dashboard aesthetic Flush fitment sits seamlessly within the existing dashboard architecture High-bond automotive adhesive backing holds securely through temperature extremes Does not obstruct, interfere with, or alter HVAC or audio control functionality Reversible installation — returns cleanly to factory specification if required Compatibility Model Code Year Range Fit Range Rover Vogue SE L405 2018 Direct Fit Range Rover Vogue L405 2019–2020 Direct Fit Range Rover Sport L494 2018 Direct Fit Range Rover Velar L560 2017–2018 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Vogue L405 2013–2017 Not Compatible Not sure which model year you have? Call us on +44 203 943 9919 Mon–Fri, 9am–7pm and we'll confirm compatibility before you order. Installation Notes ⏱ Difficulty: Beginner  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure the dashboard surface around the HVAC control area is clean, dry, and free from dust, grease, or moisture. A light wipe with an isopropyl alcohol cloth is recommended for optimal adhesion. Remove the protective backing from the pre-applied adhesive strips on the reverse of the trim piece. Align the trim carefully over the factory climate control surround, using the moulded edges as a guide to ensure accurate positioning before making contact. Press firmly and evenly across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Allow 30 minutes before regular use to allow the adhesive to fully cure at ambient cabin temperature. ⚠ Please Note: Confirm your exact model year and trim level before fitting. The 2018–2020 L405 HVAC panel layout differs from earlier L405 production years. Do not attempt to fit on non-listed models — panel geometry and control positioning will not align. If you are unsure, contact our team before installation. Upgrade Your Vogue's Interior Today Join over 12,300 Range Rover and Land Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop All Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar & Evoque · Interior Trim Aluminum Alloy Central Air Conditioning & Volume Knob Trim — Range Rover Velar 2017–2019 & Evoque 2019–2020 Precision-machined aluminum alloy knob ring trims that instantly elevate the tactile quality and visual refinement of your Velar or Evoque's central console. Range Rover Velar 2017–2019 Evoque 2019–2020 Aluminum Alloy 3-Piece Set Peel & Stick Install ISO9001 Certified 4 Colour Options Interior Trim Overview The Range Rover Velar and second-generation Evoque represent two of the most design-forward vehicles in the Land Rover lineup — clean surfaces, considered proportions, and an interior language that rewards those who notice the details. But the factory-finish plastic surrounding the climate and volume knobs has always been the one area where the interior falls just short of its own ambition. These aluminum alloy knob ring trims are engineered specifically for the Velar (2017–2019) and Evoque (2019–2020) centre console layout. Each ring is precision-formed from aerospace-grade aluminum alloy and finished to a standard that complements the vehicles' existing metalwork. Available in four colourways — silver, blue, rose gold, and red — there is an option to match whether your interior leans understated or expressive. ISO9001-certified manufacturing ensures dimensional accuracy for a flush, rattle-free fit. The result is a cabin upgrade that feels factory-intentional rather than aftermarket-applied — the kind of detail that Velar and Evoque owners will notice every single time they reach for the climate controls. What's Included ⭕ Knob Ring Trims × 3 Full set covering AC and volume knobs 🔵 Choice of 4 Finishes Silver, Blue, Rose Gold, or Red 🔧 Pre-Applied Adhesive 3M-style peel-and-stick backing included 📋 Fitment Guide Model-specific placement reference Product Highlights Precision-machined from durable aluminum alloy — not plastic ISO9001-certified production for consistent dimensional accuracy Direct-fit design — no cutting, drilling, or modification required Four finish options: Silver, Blue, Rose Gold, and Red Environmentally responsible materials throughout manufacture Rattle-free fit with flush surface alignment to factory trim Peel-and-stick installation — reversible and residue-minimal Elevates tactile feel every time you adjust climate or volume Complements existing brushed metal interior elements 3-piece set covers all central console knob positions in one kit Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2019 All Variants Direct Fit Range Rover Evoque (L551) 2019–2020 All Variants Direct Fit Range Rover Evoque (L538) 2011–2018 All Variants Not Compatible Range Rover Velar 2020+ All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes ⏱ Estimated Time: 10–15 Minutes  |  Difficulty: Beginner Ensure the vehicle interior is at room temperature — cold surfaces can reduce adhesive performance. Avoid installation below 10°C. Clean each knob base thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue from around the knob collar and allow to dry completely. Dry-fit each ring trim to confirm orientation and alignment before committing. The trims are shaped to sit flush — test the fit without removing the adhesive backing first. Peel the protective backing from one trim at a time. Position carefully over the knob base and press firmly from the centre outward for 30–60 seconds. Repeat for all three trims. Allow the adhesive to cure for at least one hour before subjecting the trims to heat from the climate system. ⚠ Note: Do not apply excessive rotational force directly to the trim rings — they are decorative overlays, not structural components. If a trim lifts at the edges after installation, reapply with a trim-safe adhesive promoter for a more permanent bond. Complete Your Velar or Evoque Interior These knob trims pair beautifully with our wider range of Velar and Evoque interior accessories. Browse the full collection or get in touch with our team for fitment advice — we know these vehicles inside out. Shop Range Rover Velar Accessories Shop Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Accessories Aluminum Alloy Central Water Cup Holder Frame Sticker for Land Rover Discovery 4 LR4 (2010–2016) A precision-cut aluminum alloy decorative trim that transforms the centre console cup holder area of your Discovery 4 into a refined, upmarket focal point — no tools, no fuss. Discovery 4 LR4 2010–2016 Aluminum Alloy Silver Sequin Finish Direct Fit No Tools Required Interior Trim Cup Holder Surround Overview The Land Rover Discovery 4 LR4 remains one of the most capable and characterful SUVs ever built — a true dual-purpose machine that's equally at home on a Welsh forest trail as it is parked outside a city restaurant. Its interior, while functional and well-appointed, is an area where many owners choose to add a personal touch that matches the vehicle's commanding presence. This aluminum alloy cup holder frame sticker is designed specifically for the Discovery 4 LR4 centre console, covering the 2010 through 2016 model years. Precision-cut to match the OEM cup holder recess, it sits flush against the existing trim and brings a polished, sequin-finish silver aesthetic that elevates the surrounding plastics with minimal effort. The result is a subtly premium look — the kind of detail you notice without knowing why the interior feels sharper. Constructed from genuine aluminum alloy rather than chrome-plated plastic, this frame offers real durability against everyday wear, UV exposure, and the knocks that come with active use. The adhesive backing is pre-applied and rated for automotive environments, meaning it won't lift, bubble, or discolour over time. A simple, satisfying upgrade that takes minutes to install and lasts the life of the vehicle. What's Included 🔲 Cup Holder Frame Sticker 1× aluminum alloy decorative surround, pre-cut for Discovery 4 LR4 🧹 Cleaning Cloth Pre-installation surface prep wipe included 📄 Installation Guide Step-by-step instruction sheet for a clean, bubble-free fit Product Highlights Precision-cut aluminum alloy construction — not cheap plastic chrome Sequin silver finish complements Discovery 4's OEM interior palette Pre-applied automotive-grade adhesive backing for a secure, lasting bond Direct fit for all Discovery 4 LR4 variants from 2010 to 2016 Sits flush with existing trim — no gaps, no misalignment Resistant to UV fade, heat cycles, and daily wear Zero permanent modification — fully reversible upgrade No tools, no drilling, no professional installation required Adds a premium, bespoke feel without a bespoke price tag Compatible with both left-hand drive and right-hand drive Discovery 4 builds Compatibility Vehicle Year Range Fit Land Rover Discovery 4 LR4 (Base / S / SE / HSE / HSE Luxury) 2010–2016 Direct Fit Land Rover Discovery 4 LR4 (Graphite / Landmark / Commercial) 2010–2016 Direct Fit Land Rover Discovery 3 LR3 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Land Rover Defender L663 All Years Not Compatible Installation Notes Difficulty: ⬛⬜⬜⬜⬜ Very Easy  |  Estimated Time: 5–10 Minutes  |  Tools Required: None Ensure the vehicle interior is at room temperature. Avoid installation in direct sunlight or in temperatures below 10°C to ensure optimal adhesion. Thoroughly clean the existing cup holder surround area using the included cloth (or isopropyl alcohol on a lint-free cloth) to remove all dust, grease, and residue. Allow to dry fully — 2 to 3 minutes is sufficient. Dry-fit the aluminum frame against the trim panel to confirm alignment and orientation before removing the adhesive backing. Peel back the adhesive protective liner from the rear of the frame slowly, taking care not to touch the adhesive surface. Position the frame carefully over the cup holder recess, aligning all edges before making contact. Press down firmly from the centre outward, holding steady pressure for 30–60 seconds to activate the bond. Run a finger firmly around all edges to ensure full contact and a flush, bubble-free finish. Allow 24 hours before exposing to moisture or heavy use. ⚠ Note: Verify your exact model year and interior trim configuration before installing. While this frame fits all Discovery 4 LR4 variants from 2010–2016, early facelift and late pre-facelift cup holder dimensions may vary slightly by region. If in doubt, contact us before purchase — our team is happy to confirm compatibility. Complete Your Discovery 4 Interior Explore the full range of Land Rover Discovery 4 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Buy any two items and save 20% with the code below. Shop Discovery 4 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Mercedes Benz · Interior Trim Aluminum Alloy Cup Holder Trim for Mercedes-Benz C-Class W205 & E-Class W213 Premium aluminum cup holder trim that elevates your cabin's refinement with seamless fitment and lasting durability. W205 / W213 2015–2017 Aluminum Alloy No Modification ISO9001 Certified Overview Mercedes-Benz C-Class W205 and E-Class W213 owners demand precision and elegance in every detail. This aluminum alloy cup holder trim is engineered to complement your cabin's factory design while introducing a contemporary touch that enhances visual appeal without compromise. Whether you're upgrading a 2015, 2016, or 2017 model, this accessory slots seamlessly into your interior landscape. Crafted from premium-grade aluminum alloy and ISO9001 certified, this trim combines durability with refined aesthetics. The lightweight construction (120g) means zero impact on vehicle dynamics, while the rigid material resists warping and fading over years of daily use. Modern design language ensures it pairs naturally with your cabin—no awkward contrast, no retrofitted appearance. Installation is straightforward and requires no drilling, cutting, or modification to factory components. Drop-in fitment means you'll have this upgrade finished in minutes, leaving you free to enjoy the subtle luxury it brings to your driving experience. What's Included 📦 Cup Holder Trim Aluminum alloy, ready to install Product Highlights Premium aluminum alloy construction for lasting durability Modern design complements W205 and W213 interiors perfectly ISO9001 certified manufacturing quality assurance Lightweight at just 120g—zero vehicle impact Direct fit requires no drilling or modifications Effortless installation in under 10 minutes Resists warping, corrosion, and discoloration Subtle elegance elevates cabin refinement instantly Factory-appearance integration—looks factory-original Model LLK573 engineered for Mercedes-Benz specifications Compatibility Model Year Range Fitment Mercedes-Benz C-Class W205 2015–2017 Direct Fit Mercedes-Benz E-Class W213 2015–2017 Direct Fit C-Class W204 (Pre-2015) 2007–2014 Not Compatible E-Class W212 (Pre-2015) 2009–2016 Not Compatible Verify fitment: Cross-check your vehicle's model code (W205 or W213) and production year before purchase. Incorrect application may result in gaps or misalignment. Installation Difficulty: Beginner | Time: 5–10 Minutes Power off your vehicle and allow the cabin to cool for 5 minutes Carefully remove the existing cup holder trim by gently prying from the edges Clean the mounting surface with a microfiber cloth to remove dust and residue Align the new aluminum alloy trim with the cup holder cavity Press firmly and evenly until the trim seats flush against the cabin surround Test fitment by running your finger around the perimeter—it should be seamless Step back and admire your refined upgrade Caution: Do not force the trim into place. If resistance is encountered, remove and re-check alignment. Forcing may damage the mounting clips or cabin finish. Ready to Refine Your Cabin? This aluminum alloy cup holder trim is the subtle touch that reminds you why precision engineering matters. Add it to your W205 or W213 today and experience the difference quality craftsmanship brings to everyday driving. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Phone support: +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler-Benz, or any official Mercedes-Benz distributor. All product names, logos, and trademarks are the property of their respective owners. This product is designed for fitment and enhancement only and does not alter vehicle safety, emissions, or warranty status—however, we recommend confirming with your dealer. Always verify compatibility with your specific vehicle identification number (VIN) before purchase.

Victorious Automotive · Defender L663 · Interior Trim Aluminum Alloy Dashboard Speaker Net Cover Sticker for Land Rover Defender 110 (2020) – Interior Modification A precision-engineered aluminum alloy speaker grille cover that elevates the Defender 110's dashboard with a refined, factory-quality finish — no drilling, no mess, no compromise. Defender L663 2020 Model Year Aluminum Alloy Peel & Stick Dashboard Trim Speaker Protection ISO9001 Certified Interior Mod Overview The 2020 Land Rover Defender 110 arrived as a modern reinterpretation of an icon — built tough but designed to impress. Its interior strikes a deliberate balance between utility and sophistication, and for owners who want to push that balance further, every detail matters. The dashboard speaker area, functional as it is, benefits enormously from a considered upgrade — and that's exactly where this cover steps in. Crafted from high-grade aluminum alloy and finished in a sleek matte black, this dashboard speaker net cover sticker is designed as a direct-fit solution for the 2020 Defender 110. It sits flush over the existing speaker grille, adding a layer of visual refinement and physical protection that feels entirely at home with the Defender's industrial-meets-premium aesthetic. The precision-cut net pattern mirrors the quality you'd expect from a factory-fitted accessory. Installation requires no tools and no specialist knowledge. The cover is backed with automotive-grade adhesive tape that bonds securely to the dashboard surface, creating a stable, rattle-free fit. It's the kind of upgrade that's subtle enough to look original, but significant enough that anyone who knows the Defender will notice — and appreciate — the difference. What's Included 🔲 Dashboard Speaker Net Cover 1× aluminum alloy sticker panel, matte black finish 🔗 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant bonding layer 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-engineered for a direct fit on the 2020 Defender 110 dashboard High-grade aluminum alloy construction — durable, lightweight, corrosion-resistant Sleek matte black finish complements all Defender interior colour schemes Automotive-grade peel-and-stick adhesive — no drilling or modification required Speaker net pattern provides physical protection without affecting sound quality ISO9001 certified manufacturing — consistent quality across every unit Rattle-free installation when applied to a clean, dry surface Heat and humidity resistant — built for real-world driving conditions Subtle, OEM-inspired aesthetic that doesn't disrupt the factory interior look Reversible modification — can be removed without damage to the dashboard surface Specifications Specification Detail Material Aluminum Alloy Finish Matte Black Dimensions 35cm (L) × 25cm (W) × 10cm (H) Weight 300g Fitment Type Peel & Stick – Automotive Adhesive Certification ISO9001 Application Dashboard Speaker Grille Cover Compatibility Vehicle Model Year Variant Fitment Land Rover Defender 110 2020 All Trim Levels (S, SE, HSE, X) Direct Fit Land Rover Defender 90 2020 All Variants Verify Before Purchase Land Rover Defender 110 2021–2024 All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 minutes  ·  🔧 Tools Required: None Begin with a clean workspace. Ensure your Defender is parked and the dashboard surface is at room temperature before you start. Using a microfibre cloth and isopropyl alcohol (IPA), thoroughly clean the speaker grille area on the dashboard. Remove any dust, oils, or residue and allow to dry completely — this is the most important step for long-term adhesion. Carefully peel away the protective backing from the adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface with your fingers. Align the cover precisely over the speaker grille, checking positioning before committing. The net pattern should sit centred and level with the surrounding dashboard trim. Apply firm, even pressure across the full surface of the cover for 30–60 seconds to activate the adhesive bond. Work from the centre outwards to avoid air pockets. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to moisture or extreme temperatures. ⚠ Important: Do not apply to a damp, dusty, or freshly cleaned surface that hasn't been allowed to dry fully. Avoid installation in temperatures below 10°C or above 35°C. If in doubt, professional fitting is recommended to ensure the best long-term result. Built for Defenders. Backed by Victorious. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium interior and exterior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is protected by our 30-day money-back guarantee. Shop All Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

BMW · X1 F48 / X2 F47 · Interior Trim Aluminum Alloy Door Speaker Cover Trim for BMW X1 F48 & X2 Premium aluminum speaker covers that enhance your door panels with a modern, refined aesthetic while protecting your factory speakers. X1 F48 (2016–2019) X2 F47 (2018–2019) Aluminum Alloy Matte Finish Easy Install 4-Piece Set Overview If you own a BMW X1 F48 (2016–2019) or X2 F47, you already know that attention to detail separates a good interior from a great one. These Aluminum Alloy Door Speaker Cover Trims are engineered to elevate your cabin's visual presence while safeguarding your OEM audio components from dust and impact. Finished in a sophisticated matte aluminum, these covers integrate seamlessly with modern BMW interior design language. The clean lines and neutral tone complement factory trim, steering wheel buttons, and dashboard accents without looking like an afterthought. Whether your goal is subtle refinement or completing a wider interior refresh, these speaker trims deliver purposeful style. Installation is straightforward—double-sided adhesive tape does the heavy lifting, meaning no drilling, no wiring, and no trips to a BMW specialist. The adhesive bonds securely over 24 hours, providing long-term durability without damaging your original door panels. What's Included 📦 4x Speaker Cover Trims One pair (left/right) for each front door ✦ Double-Sided Adhesive Tape Pre-applied for hassle-free mounting 📋 Installation Guide Step-by-step instructions included 🔒 30-Day Guarantee Return or refund, no questions asked Highlights High-grade aluminum alloy construction for durability and premium feel Matte finish resists fingerprints and complements any interior color Engineered for precise fitment on X1 F48 and X2 F47 door panels Pre-applied double-sided adhesive—no tools or fasteners required Protects OEM speakers from dust accumulation and minor impacts Non-invasive installation preserves factory door panel integrity Achieves maximum adhesion within 24 hours of installation Lightweight design adds negligible weight to your vehicle Professional appearance suitable for show-winning cabin builds Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Year Range Fitment BMW X1 F48 2016–2019 Direct Fit BMW X2 F47 2018–2019 Direct Fit BMW 2 Series 218i Gran Tourer F46 2015–2018 Direct Fit All other BMW models Any year Not Compatible Always confirm your VIN and door panel design before ordering. Speaker cover dimensions vary between model generations. Contact us at +44 203 943 9919 if you're unsure of fitment. Installation Difficulty: Beginner | Time: 15 Minutes (per vehicle) Clean the door panel surface. Use a dry microfiber cloth to remove dust, fingerprints, and light oils from the speaker grille area. A mild IPA solution on a cloth works well for stubborn residue. Allow to dry completely. Position the cover trim. Carefully align the aluminum cover with the factory speaker opening. Ensure gaps are even on all sides and the cover sits flush against the door panel. Apply firm, even pressure. Once aligned, press down firmly across the entire trim for 10–15 seconds to activate the adhesive. Work from the center outward to avoid air bubbles. Allow curing time. Leave the vehicle undisturbed for 24 hours. The adhesive reaches maximum holding strength during this period—resist opening doors or applying pressure until fully cured. Repeat for all four doors. Follow steps 1–4 for the remaining three door speaker openings. Important: Do not operate window controls or allow passengers to lean against doors for at least 24 hours after installation. While the adhesive bonds quickly, full cure strength takes a full day. If your vehicle is parked in direct sunlight, cover the doors or park in shade to avoid heat-accelerated curing (which can cause uneven adhesion). Complete Your BMW Interior Precision engineering meets understated luxury. These speaker trims are the finishing touch that transforms a good cabin into one that turns heads. Order today and experience the Victorious Automotive difference. Shop Now Save 20% on any 2 items. Use code 22GET20 at checkout. ✓ 30-Day Guarantee ✓ 4.9/5 Stars · 12,300+ Reviews ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT ✓ Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent retailer and is not affiliated with BMW Group, Bayerische Motoren Werke AG, or any official BMW distributor. All product names, logos, and trademarks are the property of their respective owners. This product is designed for aftermarket fitment and customization purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 5 L462 · Interior Trim Aluminum Alloy Door Speaker Treble Trim Cover for Land Rover Discovery 5 L462 (2017–2023) A precision-machined aluminum alloy upgrade that replaces your factory speaker trim rings with a refined, silver-finish detail — giving your Discovery 5 cabin an elevated, purposeful look without touching a wire. Discovery 5 L462 2017–2023 Aluminum Alloy Silver Finish Door Trim Speaker Surround No-Drill Fit Interior Accessory Overview The Land Rover Discovery 5 L462 is one of the most capable and well-appointed SUVs on the road, blending genuine off-road ability with a well-considered interior. But even in higher-spec trims, the door-mounted speaker surrounds can feel underwhelming against the premium touches elsewhere in the cabin — a small detail that catches the eye more than it deserves to. These Aluminum Alloy Door Speaker Treble Trim Covers are engineered specifically for the 2017–2023 Discovery 5 L462, sitting directly over the factory tweeter grilles with a flush, factory-precise fit. The solid aluminum alloy construction gives them real weight and substance, while the polished silver finish integrates naturally with the metallic accents found across the L462's interior. The result is a cohesive, premium look that feels like it should have come from the factory. Installation takes minutes and requires no drilling, no cutting, and no specialist tools. The covers attach via high-bond adhesive backing, making this one of the most satisfying cabin upgrades available for the Discovery 5 — immediate visual impact, zero risk to your vehicle. What's Included 🔊 Speaker Treble Trim Covers × 2 One for each front door — pre-cut to exact L462 speaker surround dimensions 🔧 Pre-Applied Adhesive Backing High-bond 3M-style tape applied to the reverse — ready to fit straight from the box Product Highlights Precision-machined from solid aluminum alloy — real material weight, not plastic chrome Polished silver finish complements the L462's factory metallic interior accents Engineered exclusively for the 2017–2023 Discovery 5 L462 door speaker layout No-drill, no-cut installation — adhesive backing bonds directly to factory trim Flush fitment sits tight to the door panel for a factory-integrated appearance Corrosion-resistant alloy construction — won't discolour or tarnish over time Covers and protects the factory speaker surround from scuffs and UV exposure Supplied as a pair — covers both driver and passenger front doors Lightweight design adds visual refinement without adding bulk or vibration 100% brand new — each set quality-checked before dispatch Compatibility Model Generation / Code Years Fitment Land Rover Discovery 5 L462 2017–2023 Direct Fit Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Range Rover Sport L494 / L461 2013–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle's interior at room temperature or warmer — adhesive bonds most effectively above 15°C. Clean the factory speaker surround area thoroughly using an isopropyl alcohol wipe or similar panel prep solution. Allow to dry fully before proceeding. Dry-fit each cover over the speaker grille to confirm alignment and positioning before removing the adhesive backing. Peel the protective film from the adhesive backing on the first cover, then carefully align and press firmly into position over the tweeter surround. Apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond. Repeat for the second cover on the opposite door. Allow 24 hours for the adhesive to cure fully before applying any cleaning products to the area. ⚠ Note: Ensure the door panel surface is completely free from dust, grease, silicone dressings, or wax before fitting. Contaminated surfaces will significantly reduce adhesion strength. Do not attempt installation in cold or damp conditions. Complete Your Discovery 5 Interior Browse our full range of Land Rover Discovery 5 L462 interior accessories — each product handpicked for fit, finish, and long-term quality. Trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious · Tesla Model 3 · Interior Aluminum Alloy Foot Pedals for Tesla Model 3 Premium aluminum foot pedals that elevate your Model 3 interior with sporty style and superior grip. Model 3 2017–2024 Aluminum Alloy Anti-Slip Rubber Tool-Free Install Overview Tesla Model 3 owners who take pride in their vehicle's interior know that small details create a complete cabin experience. These aluminum alloy foot pedals are designed to replace your factory pedals with a set that delivers both aesthetic refinement and practical performance. Crafted from high-grade aluminum alloy and paired with premium anti-slip rubber inserts, these pedals offer enhanced grip in all weather conditions while adding a contemporary, sportier dimension to your driving environment. The sleek finish complements the Model 3's minimalist design philosophy without feeling out of place. Installation requires no special tools—the pedals mount directly onto your existing hardware in minutes. Whether you're choosing the 2-piece or 3-piece configuration, you're getting a thoughtfully engineered upgrade that transforms an everyday control into a focal point of interior refinement. What's Included 📦 Foot Pedal Set 2-piece or 3-piece configuration 📋 Installation Guide Step-by-step photo instructions Product Highlights Aerospace-grade aluminum alloy construction Bonded anti-slip rubber insert pads Direct-fit design for Model 3 (all years) Tool-free, no-drill installation Corrosion-resistant finish Ergonomic pedal geometry Available in 2-piece or 3-piece sets Enhances cabin aesthetic instantly Durable rubber lasts 3–5 years 30-day money-back guarantee Compatibility Configuration Model 3 (2017–2024) 2-Piece Set (Accelerator & Brake) Direct Fit 3-Piece Set (Accelerator, Brake & Deadpedal) Direct Fit Installation Quick Swap – Under 10 Minutes Remove factory pedals: Locate the pedal mounting bracket beneath the dashboard. Use gentle pressure to release and slide out the existing pedal assembly. Position new pedal: Align the aluminum pedal with the mounting points. The rubberized backing will grip the bracket securely. Secure in place: Press down firmly until you hear or feel a click—no fasteners required. Test operation: Press gently to confirm smooth movement and proper positioning. Repeat for remaining pedals: Follow the same process for brake and (if selected) deadpedal. Before You Begin: Ensure your vehicle is powered down and in Park. Do not attempt removal while the car is in motion or with Autopilot active. Upgrade Your Model 3 Interior Today Premium aluminum pedals are the easiest way to personalize your cabin. In just minutes, you'll have a sportier, more refined driving environment that reflects your attention to detail. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🔄 30-Day Guarantee – Full Refund 🌍 Worldwide Shipping – DHL, FedEx, UPS 📞 Support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket supplier. We are not affiliated with Tesla, Inc., or any official Tesla subsidiary. All product names and vehicle designations are used for compatibility reference only. Modifications may affect your vehicle's warranty—consult your dealer before installation.

BMW · G30 · Interior Trim Aluminum Alloy Front Door Speaker Cover Trim for BMW 5 Series G30 Premium matte silver trim that elevates your dashboard with a sophisticated, factory-inspired finish. BMW G30 2018–2020 Aluminum Alloy Matte Silver Direct Fit Overview The BMW 5 Series G30 is a benchmark in executive sedan design, combining performance with refined interior aesthetics. This Aluminum Alloy Front Door Speaker Cover Trim is engineered specifically for 2018–2020 models, offering a seamless visual upgrade that feels like a factory option rather than an aftermarket addition. Constructed from premium aluminum alloy with a sophisticated matte silver finish, this trim transforms your door panel surrounds into a cohesive, high-end focal point. The clean lines and neutral tone complement both modern and classic cabin designs, adding visual depth without overwhelming the dashboard architecture. Installation is straightforward using automotive-grade adhesive backing—no tools required, no permanent modification to your vehicle. Whether you're refreshing an aging interior or customizing a recent purchase, this trim delivers measurable aesthetic impact with zero downside. What's Included 🎯 Front Door Speaker Cover Trim Precision-cut aluminum piece, ready to install 📋 Installation Guide Step-by-step instructions included 🔧 Adhesive Backing Pre-Applied 3M automotive-grade tape ready to bond Product Highlights ISO9001 certified manufacturing—consistent quality and durability Matte silver finish resists fingerprints and maintains appearance Lightweight at just 68g—no impact on door panel weight or function Custom engineered fit for G30 2018–2020 models only Premium aluminum alloy—corrosion-resistant and long-lasting Factory-like appearance—blends seamlessly with OEM trim finishes Tool-free installation using adhesive tape—10–15 minutes per side Non-destructive—can be removed without damage if needed Enhances cabin ambiance without altering structure or function Perfect complement to other G30 interior upgrades and modifications Compatibility Model Years Generation Compatibility BMW 5 Series 2018–2020 G30 Direct Fit BMW 5 Series 2016–2017 F10/F11 Not Compatible BMW 5 Series 2021+ G30 LCI/G31 Not Compatible BMW M5 (G30) 2018–2020 G30 Direct Fit Installation Difficulty Level: Easy | Time Required: 15–20 Minutes Prepare the surface: Clean the door panel area around the speaker cover with a microfiber cloth and mild soap solution. Ensure it is completely dry before proceeding. Remove protective backing: Peel away the adhesive backing liner slowly to avoid trapping air bubbles. Align the trim: Position the aluminum trim on the door panel, starting from the top. Check alignment against existing trim lines and door geometry. Apply pressure: Press firmly from center outward to create a complete bond. Use a soft cloth or plastic application tool to ensure even contact without scratching the matte finish. Allow curing: Leave the vehicle undisturbed for at least 4–6 hours (preferably overnight) to allow the adhesive to reach full strength before door operation. Repeat for second side: If installing on both doors, repeat steps 1–5 for the opposite side. Important: Ensure the surface is clean and dry. Do not apply in temperatures below 60°F (15°C) or in direct sunlight. The adhesive performs best between 65–85°F (18–29°C). Elevate Your G30 Interior This aluminum alloy trim is engineered for BMW owners who demand precision fitment and premium finishes. Add it to your interior refresh today and experience the difference a single, thoughtful upgrade can make. Add to Cart Apply code 22GET20 for 20% off when you order 2 or more items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 Expert support: +44 203 943 9919 Victorious Automotive is an independent automotive accessories retailer. We are not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW subsidiary. All product names and vehicle identifiers are used for compatibility reference only. BMW is a registered trademark of Bayerische Motoren Werke AG.

Victorious · Defender 90/110/130 · Interior Storage Aluminium Alloy Front Sun Visor Storage Frame – Defender 90/110/130 Keep essentials organised and add sculptural style to your cabin with this multifunctional aluminium visor frame. Defender 90 Defender 110 Defender 130 2004–2018 Aluminium Alloy Interior Storage Overview The Defender 90, 110, and 130 (2004–2018) are purpose-built platforms that reward thoughtful interior upgrades. This sun visor storage frame transforms wasted cabin space into functional organisation without compromising the cabin's clean aesthetic. Machined from durable aluminium alloy, this visor frame accepts sunglasses, cards, documents, and small items while remaining discreetly tucked behind the standard sun visor. Available in silver, satin black, and red, it matches factory trim or makes a bold interior statement depending on your specification. Installation is straightforward—precision engineering ensures direct fitment to the OE visor mechanism. No drilling, no permanent modifications, no compromise to resale value. What's Included 📦 Aluminium Visor Frame 1 or 2 pieces (select at checkout) 🔧 Installation Hardware Fasteners & shims included 📋 Fitting Guide Step-by-step photo instructions ✓ Brand New 100% factory condition Product Highlights Precision-engineered aluminium alloy construction—lightweight, corrosion-resistant, built to last Available in three finishes: silver, satin black, and red—mix or match your cabin theme Direct fit to OE sun visor mechanism—no modification to factory hardware required Holds sunglasses, cards, documents, parking permits, and small accessories securely Minimalist design complements factory interior without visual clutter Simple one-person installation in under 15 minutes with standard tools Fits all Defender generations: 90, 110, and 130 (2004–2018 range) Adds practical storage without sacrificing headroom or comfort Non-permanent—fully removable with no interior damage Backed by 30-day money-back guarantee and trusted 4.9★ customer reviews Compatibility Model Year Range Fit Defender 90 2004–2018 Direct Fit Defender 110 2004–2018 Direct Fit Defender 130 2004–2018 Direct Fit Defender L663 2020+ Not Compatible Discovery / Range Rover All Years Not Compatible Installation Notes Difficulty Level: Beginner | Time: 10–15 minutes Lower the sun visor fully from the roof mount Locate the two factory mounting points on the rear face of the visor Align the aluminium frame bracket with the mounting holes Insert the supplied fasteners and hand-tighten until snug Use a standard wrench to secure fully (do not overtighten) Raise the visor and check that the frame sits evenly against the cabin headliner Test that the visor flips down smoothly and stores items securely Note: Do not force the visor if resistance is felt. The frame is precision-toleranced; gentle, deliberate installation ensures perfect fit and longevity. Ready to Upgrade Your Cabin? Transform wasted space into organised storage without sacrificing style or authenticity. This aluminium visor frame is the ideal fix for Defender owners who refuse to compromise. Shop Defender Interior Upgrades Use code 22GET20 to save 20% when you order any 2 Victorious accessories. 4.9★ Rated by 12,300+ verified buyers 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💰 30-day money-back guarantee 📞 Support: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover subsidiary. All vehicle names and badges are registered trademarks of their respective manufacturers and are used solely for fitment identification. ```

BMW · Fuel Tank · Exterior Trim Aluminum Alloy Fuel Tank Cap Cover Trim for BMW Premium anodized fuel cap trim that elevates your BMW's exterior with a refined, modern finish in your choice of striking colors. BMW 2011–2017 Aluminum Alloy 20g Lightweight Double-Sided Tape ISO9001 Certified Overview BMW owners who demand precision and aesthetic refinement will find this Aluminum Alloy Fuel Tank Cap Cover Trim an essential finishing touch. Engineered specifically for select BMW models between 2011 and 2017, it transforms a utilitarian component into a statement of design intent. Crafted from high-quality, lightweight aluminum alloy and finished with professional-grade anodizing, this cover combines durability with visual impact. Available in vibrant red and blue, each trim is precision-manufactured to exacting tolerances and certified to ISO9001 standards—the same benchmarks BMW itself employs. Installation is effortless: simply clean the fuel cap housing and apply the included double-sided tape. Within minutes, your BMW's fuel cap transitions from OEM plastic to a premium accent that catches light and commands attention. Perfect for those who refuse to overlook the details. What's Included 🛡️ 1× Fuel Tank Cap Cover Trim Anodized aluminum alloy construction 📎 Double-Sided Adhesive Tape Pre-applied for secure, lasting hold 📋 Installation Guide Step-by-step instructions included ✓ Quality Certification ISO9001 tested and verified Product Highlights High-grade lightweight aluminum alloy with anodized finish Available in striking red and vibrant blue colorways Precision-engineered for perfect fuel cap alignment ISO9001 manufacturing certification ensures quality consistency Pre-applied double-sided tape for tool-free installation Weighs only 20g—zero impact on vehicle performance Weather-resistant anodized coating resists corrosion and fading Designed for BMW 2011–2017 model year compatibility Professional finish elevates exterior detailing instantly No permanent modifications—easily removable if desired Compatibility Year Range Gas Models Diesel Models Status 2011–2017 ✓ Compatible ✓ Compatible Direct Fit 2018+ ✗ Not Compatible ✗ Not Compatible Not Recommended Pre-2011 ✗ Not Compatible ✗ Not Compatible Not Recommended Colour Options: Red or Blue. Please select your preferred finish at checkout. Both colours are available for 2011–2017 BMW gas and diesel models. Installation Time Required: 5–10 minutes | Difficulty: Beginner | Tools: None Locate the fuel tank cap: Open your fuel door and locate the fuel cap on the side of your BMW. Clean the surface: Wipe the fuel cap housing thoroughly with a clean, dry cloth to remove dust, dirt, and any residue. Allow to dry completely. Peel the backing: Carefully remove the protective backing from the double-sided tape on the trim. Align and press: Gently align the aluminum trim over the fuel cap housing, ensuring it sits flush and symmetrical. Press firmly for 10–15 seconds to establish a secure bond. Allow to cure: Wait 24 hours before refuelling to allow the adhesive to reach full strength. Enjoy: Step back and admire your BMW's elevated aesthetic. Important: Ensure the fuel cap housing is completely clean and dry before application. A contaminated surface will compromise adhesive bond strength. If the trim does not adhere properly, carefully peel it away and reapply following the steps above. Ready to Elevate Your BMW? This fuel tank cap trim is the kind of detail that separates meticulous ownership from the rest. Premium materials, flawless fit, and effortless installation—because every component of your BMW deserves to reflect your standards. Shop Fuel Tank Cap Trim Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to BMW AG, BMW North America, or any official BMW subsidiary. BMW is a registered trademark of Bayerische Motoren Werke AG. This product is designed for fit and compatibility purposes only and does not imply official endorsement or approval.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Aluminum Alloy Headlight Switch Decoration Frame for Land Rover Discovery 4 LR4 (2010–2016) A precision-cut aluminum alloy trim ring that frames the headlight switch panel on the Discovery 4 LR4 — delivering a cleaner, more refined dashboard aesthetic with no modification required. Discovery 4 / LR4 2010–2016 Aluminum Alloy Interior Trim Self-Adhesive Fit No Drilling Required Dashboard Upgrade Direct Fit Overview The Land Rover Discovery 4 LR4, produced from 2010 to 2016, occupies a special place in the Discovery lineage — a genuinely capable off-road platform wrapped in a composed, premium interior. For owners who want to maintain and elevate that premium feel, the details matter. The factory headlight switch area, while functional, can look dated over time. This decoration frame addresses that directly. Crafted from solid aluminum alloy, this headlight switch decoration frame is designed to sit flush over the existing switch panel surround, giving the area a sharper, more contemporary finish. The machined surface catches ambient cabin light subtly and purposefully — not flashy, just refined. It's the kind of upgrade that looks like it should have come from the factory. With a self-adhesive backing and a profile engineered specifically for the Discovery 4 LR4 dashboard layout, installation takes minutes and requires no tools, no drilling, and no irreversible changes to your vehicle. Whether you're refreshing a high-mileage interior or simply adding detail to a well-kept example, this piece delivers an immediately noticeable result. What's Included 🔲 Headlight Switch Decoration Frame 1x aluminum alloy trim piece, pre-cut for Discovery 4 LR4 🔧 Pre-Applied Adhesive Backing 3M-style adhesive layer for secure, residue-free bonding 🧽 Cleaning Prep Wipe For surface preparation prior to installation Product Highlights Precision-cut aluminum alloy construction — built to last the life of the vehicle Custom-profiled for the Discovery 4 LR4 headlight switch panel — no trimming needed Self-adhesive backing for a clean, tool-free installation in under 10 minutes Adds a premium, machined-metal aesthetic to the driver's side dashboard cluster Resistant to UV fading, heat warping, and everyday cabin wear Sits flush with the surrounding trim for an OEM-integrated appearance Lightweight profile adds no bulk or interference to switch operation Easily removable without damaging factory surfaces if needed Compatible with all Discovery 4 LR4 trim levels across the 2010–2016 model range Compact packaging — dimensions 15 x 10 x 1 cm, ships safely worldwide Compatibility Vehicle Model Code Years Fit Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Start with the vehicle parked, ignition off, and the interior at room temperature. Cold adhesive bonds less effectively — allow a cold vehicle to warm up for a few minutes if needed. Use the included prep wipe to thoroughly clean the existing headlight switch panel surround. Remove any dust, fingerprints, or polish residue and allow to dry completely. Hold the decoration frame up to the panel without removing the adhesive backing to confirm alignment and fitment before committing. Peel back the adhesive liner, position the frame carefully over the panel surround, and press firmly from the centre outward — avoid air pockets by working systematically. Apply steady pressure across the entire surface for 30–60 seconds to ensure full adhesion. Allow 24 hours before exposing to sustained heat or moisture. Note: Ensure the panel surface is fully dry and free from any wax, silicone spray, or interior dressing before applying. Products like Armor All or similar can significantly reduce adhesive bond strength. If in doubt, wipe with isopropyl alcohol before installation. Complete Your Discovery 4 Interior This decoration frame is one of many precision interior upgrades available for the Discovery 4 LR4 at Victorious Automotive. Browse the full collection and give your cabin the attention it deserves. Shop Discovery 4 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Please verify compatibility with your specific vehicle configuration before purchase.

Victorious · Mercedes G-Class · Exterior Aluminium Alloy Rear Side Window Protective Hanging Bag Board – W463 Premium aluminium exterior organiser designed to maximise cargo security and streamline the cabin of your W463 G-Class. W463 2004–2018 Aluminium Alloy No Drilling Direct Fit Black Finish Overview The Mercedes-Benz G-Class W463 (2004–2018) is a vehicle defined by purposeful engineering and uncompromising durability. Every accessory should reflect that same commitment to quality and function. This Aluminium Alloy Rear Side Window Protective Hanging Bag Board transforms how you organise the interior—turning dead space into active storage while preserving the iconic cabin aesthetic. Engineered from premium-grade aluminium alloy, this hanging board mounts cleanly to the rear side windows without modification to your vehicle. It creates a secure, accessible storage point for smaller items, tools, or recovery gear—keeping essentials within reach without clutter. The sleek black finish integrates seamlessly with the W463's interior, enhancing rather than interrupting its design language. For owners who demand both form and function, this board delivers exactly that: intelligent storage that respects your G-Class's heritage while improving everyday usability. Installation requires no drilling, no permanent fasteners, and no guesswork—just direct fitment and confidence. What's Included 📦 Hanging Bag Board Aluminium alloy, black finish, ready to install 🔧 Installation Hardware All fasteners and brackets included; no drilling required 📋 Fitment Guide Step-by-step instructions for seamless installation Product Highlights Premium-grade aluminium alloy construction—lightweight yet exceptionally rigid Sleek matte black finish complements all W463 interior colour schemes Direct fitment to rear side windows—no modifications or drilling required Maximises vertical storage without sacrificing cabin space or comfort Secure hanging system prevents shifting, rattling, or movement during transit Corrosion-resistant material withstands temperature and humidity extremes Low-profile design maintains sightlines and preserves the G-Class's clean profile Quick-release brackets allow tool-free removal for deep interior cleans Ideal for storing recovery kit, small tools, documents, or personal items Engineered for W463 models spanning 2004–2018 production years Compatibility Model Generation Years Fitment Mercedes-Benz G-Class W463 2004–2018 Direct Fit Mercedes-Benz G-Class W463A (2019+) 2019+ Not Compatible Note: This product is engineered exclusively for W463 models (2004–2018). W463A models (2019+) require a different fitment specification. Installation Difficulty Level: Easy | Time: 15–20 minutes Locate the rear side window frames on both sides of the cabin. Clean the mounting surfaces with a dry, lint-free cloth to ensure adhesion and contact. Position the hanging bag board against the window frame and align with pre-marked mounting points. Attach the supplied brackets securely to the frame using the included fasteners—hand-tight, then snug with a socket wrench (do not over-tighten). Test the board for movement or flex; it should feel solid and immovable. Load test with light cargo to confirm stability before full use. Important: Do not exceed the recommended load capacity of 5 kg per board. Over-loading may compromise fitment integrity. If mounting to laminated or tinted windows, test adhesion on a small area first to ensure compatibility with your specific window type. Ready to Upgrade Your W463? Transform how you organise your G-Class cabin. Add this premium hanging bag board to your order today and enjoy smart, discreet storage that respects your vehicle's legendary design. Shop Mercedes G-Class Accessories Use code 22GET20 for 20% off any 2 items. 4.9 / 5 stars 12,300+ verified reviews 30-day money-back guarantee Mon–Fri 9am–7pm +44 203 943 9919 Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler-Benz, or any official Mercedes distributor. "Mercedes," "G-Class," "W463," and all related badging are registered trademarks of Daimler-Benz AG. This product is designed for aftermarket fitment only and is sold as an accessory enhancement. Always verify fitment with your specific vehicle configuration before purchase.

Victorious Automotive · Defender L663 · Interior Trim Aluminum Alloy Door Screw Protection Covers for Land Rover Defender 110/130 L663 (2020–2021) — Red & Silver Transform exposed interior screw heads into purposeful, precision-finished accents — purpose-engineered for the Defender 110 and 130 in anodised red or brushed silver aluminium alloy. Defender L663 2020–2021 Aluminum Alloy Interior Trim Door Screw Covers Red / Silver No-Drill Fit ISO9001 Certified Model: LLK2918 Overview The Land Rover Defender L663 was designed to be honest about its construction — rugged, purposeful, and unapologetically mechanical. But exposed screw heads throughout the cabin door panels are one area where the factory finish leaves something to be desired. For owners who take pride in every detail of their Defender's interior, those raw fixings stand out for the wrong reasons. These Aluminum Alloy Door Screw Protection Covers are machined to sit flush over each exposed screw head, converting utilitarian fixings into deliberate, styled accents. Available in a bold anodised red or a refined brushed silver, they complement both stock and upgraded Defender interiors — whether you're running a fully specced First Edition or a stripped-back commercial variant you've personalised from the ground up. Constructed from durable aluminium alloy and certified to ISO9001 quality standards, these covers are engineered for longevity. The pre-applied automotive-grade adhesive backing means no drilling, no cutting, and no modification to your vehicle — just a clean, considered finish that looks like it came straight from the factory. What's Included 🔩 Option 1 — Set of 11 Covers Ideal for targeted door panel coverage on a single area 🔩 Option 2 — Set of 56 Covers Full interior coverage across all door panels and trim points 🏷️ Pre-Applied Adhesive Backing Automotive-grade tape included on each cover, ready to fit 📦 Protective Packaging Each set securely packaged to prevent transit damage Product Highlights Conceals exposed factory screw heads for a cleaner, more finished interior appearance Precision-machined aluminium alloy construction — lightweight yet exceptionally durable Available in anodised red or brushed silver to suit your interior colour scheme Pre-applied automotive-grade adhesive for a secure, no-drill installation ISO9001 certified manufacturing — consistent quality across every unit Fitment-specific design for Defender 110 and 130 L663 (2020–2021 model years) Two set sizes available — 11-piece for targeted areas or 56-piece for full coverage Low-profile fit that sits flush with surrounding trim panels without protruding Resistant to vibration, heat, and the rigours of daily Defender use Reversible installation — covers can be removed without damage to original trim Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 130 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Unconfirmed Land Rover Defender 110/130 L663 2022–2026 Unconfirmed Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–30 minutes  ·  🔧 Tools Required: None Thoroughly clean the area around each exposed screw head using an isopropyl alcohol wipe. Remove any dust, grease, or residue to ensure maximum adhesive bond. Allow the cleaned surfaces to dry completely before proceeding — approximately 2–3 minutes in normal conditions. Peel the protective film from the adhesive backing on the first cover, taking care not to touch the adhesive surface. Align the cover precisely over the screw head, ensuring it sits centrally and flush with the surrounding trim panel. Apply firm, even pressure for 20–30 seconds to activate the adhesive bond fully. Repeat across all remaining screw positions. For the 56-piece set, work systematically across each door panel in sequence to ensure consistent alignment. Allow 24 hours before exposing the covers to extreme heat or moisture for a fully cured bond. ⚠ Note: Colour may vary slightly from product imagery due to differences in screen calibration. We recommend ordering a sample or reviewing both colour options carefully before committing to a full 56-piece set. Do not apply to wet, dirty, or freshly cleaned surfaces that have not been allowed to dry. Finish Your Defender the Right Way Every detail matters when it comes to your L663. Browse our full range of Defender interior accessories and give your cabin the precision finish it deserves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Mini · Key Fob Accessories Aluminum Alloy Remote Replacement Cover for Mini Cooper Premium aluminum protection that elevates your Mini's interior aesthetic while safeguarding your remote from daily wear. Mini Cooper Aluminum Alloy 3 Colors Quick Install Luxury Finish Overview Mini owners understand that every detail matters. Your key fob is one of the first things you reach for each time you approach your Cooper, and it deserves the same attention to quality and design as the rest of your vehicle. This Aluminum Alloy Remote Replacement Cover transforms a functional necessity into a statement piece that complements your car's premium aesthetic. Engineered from aircraft-grade aluminum alloy, this cover resists scratches, dents, and oxidation far better than plastic alternatives. The precision-machined finish feels substantial in hand and projects the kind of understated luxury that Mini enthusiasts expect. Whether your Cooper is a classic or contemporary model, this cover integrates seamlessly without compromising functionality or button response. Installation takes minutes and requires no tools. Simply remove your existing key fob cover and snap the aluminum replacement into place. The three available finishes—Deep Black, Polished Silver, and Racing Red—ensure you'll find the perfect match for your Cooper's personality. What's Included 🔑 Aluminum Alloy Cover Premium replacement housing 📖 Installation Guide Step-by-step illustrated instructions Product Highlights Aircraft-grade aluminum alloy construction Superior durability and scratch resistance Three premium finishes available Precise CNC machining for perfect fit Lightweight yet rigid design No tools required for installation Maintains original button functionality Oxidation and corrosion resistant Complements Mini's modern design language Backed by 30-day money-back guarantee Compatibility Mini Cooper Model Compatibility Mini Cooper (F56) 2014–2023 Direct Fit Mini Cooper S (F56) 2014–2023 Direct Fit Mini Cooper SE (F56) 2019–2023 Direct Fit Mini Cooper (F57 Convertible) 2015–2023 Direct Fit Mini Countryman (F60) 2017–2024 Direct Fit Mini Clubman (F54) 2015–2023 Direct Fit Mini Cooper (R53) Pre-2014 Not Compatible Note: Confirm your specific model year and remote type before purchase. Refer to your owner's manual or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm GMT) for compatibility questions. Installation Difficulty: Beginner | Time: 3–5 minutes Power off your key fob or remove the battery to prevent accidental button presses. Gently pry open your existing plastic cover using a soft plastic tool or your fingernail along the seam. Carefully remove the internal electronics and battery without forcing components. Align the internal assembly with the new aluminum alloy housing. Snap the aluminum cover closed until you hear and feel a secure click. Reinsert the battery and test all buttons to confirm proper operation. Important: Handle electronics with care. Do not force the new cover closed; a proper fit should feel smooth and require minimal pressure. If you encounter resistance, verify internal assembly alignment and try again. Elevate Your Mini Today A premium key fob cover is a small touch that makes a meaningful difference in how you experience your Cooper every single day. This aluminum alloy replacement delivers durability, style, and the kind of tactile quality that justifies the investment. Shop Remote Covers Save 20% on any two items with code 22GET20 ✓ 30-day money-back guarantee ✓ 4.9/5 stars from 12,300+ reviews ✓ Ships worldwide via DHL, FedEx, UPS Victorious Automotive is an independent retailer and is not affiliated with BMW Group, Mini, or Jaguar Land Rover. All product names, logos, and brands are the property of their respective owners. We provide premium aftermarket accessories designed to complement and enhance your vehicle.

Victorious Automotive · Land Rover Discovery 3 / Discovery 4 · Interior Accessories Aluminum Alloy Seat Armrest Box Adjustment Knobs for Land Rover Discovery 3 & Discovery 4 (1998–2016) Precision-machined billet aluminum knobs that replace worn or broken seat armrest box adjustment controls — restoring factory function with a clean, premium finish. Discovery 3 (L319) Discovery 4 (L319) 1998–2016 Aluminum Alloy Silver Finish Direct Fit Interior Upgrade Set of 2 Overview The Land Rover Discovery 3 and Discovery 4 are built for a life of both on-road refinement and genuine off-road capability. Over time, the plastic seat armrest box adjustment knobs — subject to daily use across all conditions — are among the first components to show their age. Faded, cracked, or simply missing, they're a small but noticeable detail that can let down an otherwise well-maintained interior. These aluminum alloy seat armrest box adjustment knobs are designed as a direct, no-modification replacement for both the left and right passenger sides. Machined from high-grade aluminum and finished in a polished silver, they deliver a tactile, premium feel that the original plastic units never quite managed. The added weight and rigidity of billet metal means they operate with a confidence and solidity that suits a vehicle of the Discovery's standing. Whether you're refreshing a high-mileage workhorse or preserving a well-kept example, swapping these in takes minutes and makes an immediate difference to the quality of the cabin experience. It's the kind of detail that Discovery owners — who know exactly what their vehicles are capable of — will appreciate every time they reach for the adjustment. What's Included 🪛 Left Armrest Adjustment Knob Driver / left passenger side — direct fit replacement 🪛 Right Armrest Adjustment Knob Right passenger side — direct fit replacement Product Highlights Machined from high-grade aluminum alloy for lasting rigidity and wear resistance Polished silver finish complements the Discovery 3 and 4 interior palette Direct replacement fit — no drilling, cutting, or modification required Sold as a pair covering both left and right armrest box positions Significantly more durable than the original OEM plastic components Adds a premium, tactile quality to a frequently used interior touchpoint Lightweight yet solid — metal construction without adding bulk Resistant to UV fading, cracking, and discolouration over time Compatible across the full Discovery 3 and Discovery 4 production run (1998–2016) Ideal for restoration builds, cabin refreshes, or simply replacing worn originals Compatibility Vehicle Model Code Years Fitment Land Rover Discovery 3 L319 2004–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 1 L314 1989–1998 Not Compatible Land Rover Discovery 2 L318 1998–2004 Verify Before Purchase Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport (L320) L320 2005–2013 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Ensure the vehicle is stationary and the seat armrest box is in a neutral, accessible position. Locate the existing adjustment knob on the left or right side of the seat armrest box housing. Grip the original knob firmly and rotate counter-clockwise, or pull directly depending on your specific fitment, to release it from the mounting post. Clean the mounting post with a dry cloth to remove any dust or debris before fitting the new knob. Press the new aluminum alloy knob firmly onto the mounting post, aligning it correctly, and rotate clockwise until seated and secure. Repeat for the second knob on the opposite side. Test the adjustment function through its full range of motion to confirm correct fitment. Note: If your existing knobs are damaged or have broken retaining clips, inspect the mounting post before fitting. Contact our team on +44 203 943 9919 if you need guidance before installation. The Right Finish for a Vehicle That Deserves It Small details define a well-cared-for Discovery. Upgrade your armrest box controls today and explore our full range of Discovery 3 and Discovery 4 interior accessories at Victorious Automotive. Shop Discovery 3 Accessories Shop Discovery 4 Accessories Buy any 2 items and save 20% with code 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Aluminum Alloy Silver Center Console Side Cover for Land Rover Discovery Sport 2015–2019 A precision-cut aluminum alloy upgrade that replaces tired plastic trim with a clean, brushed-silver finish — purpose-built for the Discovery Sport L550 interior. Discovery Sport L550 2015–2019 Aluminum Alloy Silver Finish Center Console No-Drill Fit 2-Piece Set Interior Trim Overview The Land Rover Discovery Sport (L550, 2015–2019) occupies a unique space in the Land Rover lineup — compact enough for daily use, capable enough for genuine off-road work, and refined enough to stand alongside its larger siblings. Owners who care about their vehicle's interior know that the factory plastic trim around the center console is one of the first areas to show wear, scuffs, and fading over time. It's a small detail, but in a cabin you spend hours in, it matters. These aluminum alloy center console side covers are designed as a direct, no-compromise replacement for that factory plastic trim. Manufactured from high-grade aluminum alloy with a clean brushed silver finish, they introduce a level of material quality to the cabin that feels genuinely premium — not an afterthought. The geometry is engineered specifically for the 2015–2019 Discovery Sport, meaning the panel edges, mounting points, and overall profile align precisely with OEM fitment tolerances. Installation requires no drilling, no modifications, and no specialist tools. Each cover is pre-fitted with strong double-sided automotive-grade adhesive tape on the reverse, allowing for a flush, rattle-free bond to the existing console surface. The result is an interior upgrade that looks factory-fitted while delivering a material and visual step up from the original plastic. What's Included 🔲 Console Side Cover × 2 Left and right panels, matched pair 🔧 Pre-Applied Adhesive Automotive-grade double-sided tape fitted to each cover 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Manufactured from high-grade aluminum alloy for long-lasting durability Brushed silver finish adds a refined, premium aesthetic to the cabin Precision-cut to match the exact profile of the Discovery Sport L550 console Pre-applied automotive-grade adhesive for a clean, tool-free installation No drilling, cutting, or permanent modification required Covers both left and right sides — complete set of 2 panels Resistant to daily wear, UV exposure, and temperature fluctuations Flush-fit design sits level with surrounding trim for a factory appearance Lightweight construction adds negligible weight to the vehicle interior Compatible with all trim levels and engine variants for 2015–2019 model years Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 (Facelift & Pre-Facelift) 2015–2019 Direct Fit Land Rover Discovery Sport L550 (2020 Facelift onwards) 2020–present Not Compatible Land Rover Discovery 5 L462 2017–present Not Compatible Range Rover Evoque L538 2011–2019 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Begin with the vehicle stationary and the center console area clean and dry. Use an isopropyl alcohol wipe to thoroughly degrease the surface areas where the covers will be bonded — this is critical for adhesive performance. Allow the cleaned surface to dry completely for 2–3 minutes before proceeding. Dry-fit each cover without removing the adhesive backing to confirm correct alignment, panel orientation (left and right), and edge flush with surrounding trim. Once satisfied with the fit, peel the protective film from the adhesive tape on the first cover. Carefully align the cover with the console surface and press firmly into position, applying even pressure across the full panel for 30–60 seconds. Repeat for the second cover on the opposite side. Allow a minimum of 2 hours before subjecting the covers to heavy contact or movement. Full adhesive cure is typically achieved within 24 hours at room temperature. ⚠ Note: Do not attempt installation in cold or damp conditions — adhesive performance is significantly reduced below 10°C. Ensure the cabin is at ambient room temperature for best results. If in doubt, contact us before fitting. Upgrade Your Discovery Sport Interior Small details define a well-kept cabin. These aluminum alloy console covers are one of the simplest, most impactful upgrades you can make to your 2015–2019 Discovery Sport — browse the full Discovery Sport accessories collection for more. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and brand references are used solely for compatibility identification purposes. All trademarks remain the property of their respective owners.

Victorious · Defender · Interior Aluminum Alloy Dashboard Center Clock Decorative Ring – Defender 2008–2018 Premium silver trim ring with seamless fit and adhesive installation for authentic interior upgrades. Defender 2008–2018 Aluminum Alloy Dashboard Trim Silver Finish Plug & Play Overview Your Defender's dashboard deserves the same attention to detail as the rest of your vehicle. This aluminum alloy clock decorative ring brings purposeful refinement to the center console, adding a touch of contemporary styling without compromising the utilitarian character that defines the platform. Machined from high-grade aluminum and finished in satin silver, this trim ring sits perfectly around your dashboard clock aperture, creating visual continuity across the cabin. The adhesive backing ensures secure installation with zero damage to your original dash—no drilling, no permanent alterations, just a clean aesthetic upgrade that respects the integrity of your interior. Whether you're refreshing an aging cabin or completing a modern makeover, this piece works equally well as a standalone upgrade or part of a wider interior trim package. Available in silver and red to match your personal vision. What's Included 🔷 1x Decorative Ring Aluminum alloy, pre-finished 🔒 Double-Sided Adhesive Pre-applied, ready to install 📋 Installation Guide Step-by-step photo instructions 🛡️ 30-Day Guarantee Full refund if not satisfied Product Highlights Premium aluminum alloy construction for durability and weight savings Satin silver finish resists fingerprints and maintains aesthetic appeal Precision-engineered to match OEM dashboard curvature exactly Double-sided adhesive backing—no tools, drilling, or permanent modifications Direct fit for all 2008–2018 Defender models (TDCi, Puma, Heritage editions) Anti-corrosion treatment for long-term color and structural integrity Optional red finish available to coordinate with interior accents Lightweight design maintains cabin ergonomics and visibility Reversible installation—remove and reposition anytime without residue Backed by Victorious' 4.9★ reputation and 12,300+ verified owner reviews Compatibility Defender Model Year Range Fit Defender 90 / 110 (Td5, TDCi) 2008–2016 Direct Fit Defender 110 Puma 2016–2018 Direct Fit Defender Heritage Edition 2015–2018 Direct Fit Defender 130 2008–2018 Direct Fit Defender 2020+ (L663) 2020–Present Not Compatible Installation Difficulty: Beginner | Time: 5 minutes Prepare the surface: Gently clean the dashboard clock aperture rim with a soft, dry microfiber cloth. Remove any dust, oils, or residue to ensure optimal adhesive contact. Position the ring: Carefully align the decorative ring with the clock housing, starting at the top center and working around the circumference. Ensure even gaps on all sides. Apply firmly: Once aligned, press down gently but firmly around the entire ring for 10–15 seconds. Use even pressure to activate the adhesive bond. Allow curing: Leave undisturbed for 24 hours before touching or adjusting. The adhesive will reach full strength overnight. Final inspection: Check for any gaps or movement. If repositioning is needed, gently lift and re-apply while adhesive is still setting. Note: Dashboard temperature may affect adhesive curing time in cold climates. Ensure interior is at room temperature (16°C+) before installation. Do not expose to direct sunlight or extreme heat for 48 hours post-installation. Complete Your Defender's Interior Story Thoughtful trim upgrades compound into a cabin that feels intentional and refined. This clock ring is the detail that transforms a good interior into one you'll appreciate every time you turn the key. Shop Defender Interior Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ Reviews ✓ 30-Day Guarantee ✓ Worldwide Shipping ✓ Expert Support Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All product names and logos are property of their respective owners. This product is designed for enthusiasts and does not void manufacturer warranty when installed correctly.

Victorious · Defender 90/110 · Interior Styling Aluminum Alloy Silver Fuse Box Cover Screw Bolt Knob for Land Rover Defender 90/110 (2004-2018) Premium aluminum dash fuse box cover that transforms your Defender's cabin with modern styling and refined details. Defender 90/110 2004–2018 Aluminum Alloy Silver Finish Interior Upgrade Overview The Land Rover Defender 90 and 110 (2004–2018) are legendary platforms—known for their uncompromising durability and utilitarian heritage. But that doesn't mean your cabin has to feel unrefined. Every detail matters when you're building a vehicle that's as capable as it is personal. This aluminum alloy fuse box cover brings a contemporary edge to your dashboard. The brushed silver finish catches light subtly, elevating the entire interior aesthetic without compromising the Defender's authentic character. It's a purposeful upgrade that serious owners recognize—the kind of detail that separates a built vehicle from a stock one. Installation is straightforward, requiring no modifications to your vehicle. Whether you're refining a daily driver or enhancing a project build, this cover pairs seamlessly with other interior upgrades and delivers the kind of lasting quality Victorious customers expect. What's Included ◆ Fuse Box Covers (×2) Premium aluminum alloy, pre-finished ◆ Screw Bolt Hardware Complete fastening kit included ◆ Installation Instructions Step-by-step guide for confident fitment ◆ Victorious Lifetime Support Contact us anytime: +44 203 943 9919 Product Highlights Aircraft-grade aluminum alloy construction Brushed silver finish resists fingerprints and oxidation Direct-fit design—no drilling or cutting required Precise screw bolt knob hardware included Transforms dashboard appearance with subtle elegance Durable and engineered for the long term Complements factory Defender styling naturally Compatible with both 90 and 110 chassis (2004–2018) Quick installation—under 15 minutes per cover Part of the wider Victorious Defender interior collection Compatibility Model Years Status Defender 90 2004–2018 Direct Fit Defender 110 2004–2018 Direct Fit Defender 130 2004–2018 Direct Fit Defender 2020+ (L663) 2020–Present Not Compatible Installation Notes Difficulty: Beginner | Time: 10–15 minutes per cover Locate the fuse box on your dashboard (typically driver's side or under the steering column). Remove any existing cover or trim panel carefully to avoid damage. Position the aluminum alloy cover over the fuse box opening. Align the pre-drilled screw holes with the mounting points on your dash. Insert the supplied bolt hardware and tighten gently—snug, not over-tightened. Step back and verify the cover sits flush and level with surrounding trim. Repeat for the second cover if upgrading multiple points in your cabin. Important: Do not over-tighten fasteners. Aluminum is softer than steel and can strip. Snug fit is all that's needed. If you're unsure, consult our support team before installation. Ready to Refine Your Defender Interior? Small upgrades make a measurable difference in how you experience your vehicle every day. This fuse box cover is a perfect example—purposeful, durable, and unmistakably premium. Add it to your build today. Shop Defender Interior Upgrades Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars from 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS, TNT shipping Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover Ltd. All vehicle names and brands are the property of their respective owners. Product compatibility listed is based on fitment research; we recommend confirming compatibility with your specific vehicle before purchase.

Victorious · Defender 90/110/130 · Interior Trim Aluminum Alloy Silver Door Bowl Cover – Defender 90 110 130 Premium interior detailing that transforms your door panels with brushed aluminum elegance. Defender 90/110/130 2004–2018 Aluminum Alloy Silver Finish Interior Upgrade Overview The Land Rover Defender 90, 110, and 130 are legendary workhorses, but their interiors deserve the same level of attention as their capability. These aluminum alloy door bowl covers elevate your cabin's visual impact with a brushed silver finish that catches light beautifully and complements modern Defender aesthetic. Each cover is precision-engineered from high-grade aluminum alloy, offering a lightweight yet rigid construction that integrates seamlessly into your existing door panel geometry. The silver powder-coat finish resists fingerprints and daily wear, maintaining its factory-fresh appearance for years. Installation takes under 30 minutes per side using simple screw fixation—no modifications to your vehicle required. This is the kind of detail upgrade that Defender owners notice: subtle from distance, stunning up close. What's Included 🛡️ 2x Door Bowl Covers Passenger and driver side 🔧 Stainless Steel Screws Corrosion-resistant fasteners 📋 Installation Guide Step-by-step fit instructions ✓ Quality Assurance Pre-fit inspection included Product Highlights Premium brushed aluminum alloy construction Lightweight yet rigid design for longevity Silver finish resists fingerprints and oxidation Direct bolt-on installation, no modifications Fits 2004–2018 Defender 90, 110, and 130 Complements modern and classic Defender interiors Stainless steel fasteners included Improves cabin ambiance and perceived quality Pair with other trim upgrades for cohesive look 30-day money-back guarantee on all purchases Compatibility Model Year Range Fit Status Defender 90 2004–2018 Direct Fit Defender 110 2004–2018 Direct Fit Defender 130 2004–2018 Direct Fit Defender 2020–Present (L663) 2020+ Not Compatible Range Rover / Discovery All Years Not Compatible Note: Verify your vehicle's build year and trim configuration before purchase. Door panel geometry varies slightly by market and specification. Installation Difficulty Level: Beginner | Time: 25–30 minutes Prepare: Locate existing door bowl panel. Ensure vehicle is parked on level ground with engine off. Remove old trim: Gently prise out the original door bowl cover using a plastic trim tool to avoid scratches. Clean surface: Wipe the mounting area with a microfibre cloth to remove dust and debris. Position new cover: Align the aluminum cover over the mounting holes, ensuring flush fit against door panel. Secure fasteners: Hand-tighten stainless steel screws first, then torque to finger-tight (do not over-tighten). Inspect finish: Verify all edges are flush and the cover sits evenly. Repeat for passenger side. Final check: Ensure no gaps between cover and door panel trim. Test door operation for smooth closure. ⚠ Important: Do not over-tighten fasteners, as aluminum can strip. If screws feel resistant, stop and realign the cover. Slight gaps are normal and will not affect function. Upgrade Your Defender's Interior Today Small details create unforgettable cabins. These brushed aluminum door bowl covers are the foundation of a premium Defender interior—subtle, purposeful, and instantly noticeable to anyone who knows what to look for. Shop Defender Upgrades Use code 22GET20 to save 20% on any 2 items ⭐ 4.9/5 Stars – 12,300+ verified reviews 🚚 Worldwide Shipping – DHL, FedEx, UPS, TNT 💰 30-Day Guarantee – Full refund, no questions 📞 Expert Support – +44 203 943 9919, Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, Range Rover, or any official Land Rover dealer. All trademarks and product names mentioned remain the property of their respective owners. Product compatibility is provided as-is; please verify fitment before purchase.

Victorious Automotive · Discovery 4 / Range Rover Sport L320 / Freelander 2 · Interior Trim Aluminum Alloy Steering Wheel Button Patch Cover — Range Rover Sport, Discovery 4 & Freelander 2 (2010–2016) Eleven precision-cut aluminum alloy button covers that refresh your steering wheel's worn controls with a factory-quality finish — no drilling, no tools, no fuss. Discovery 4 2010–2016 Range Rover Sport L320 2010–2013 Freelander 2 2013–2015 Aluminum Alloy Black & Silver Options Adhesive Fit 11-Piece Set Interior Upgrade Overview The Discovery 4, Range Rover Sport L320, and Freelander 2 all share a common trait — beautifully designed steering wheel controls that, over years of daily use, begin to show their age. The button legends fade, the surrounds scuff, and what was once a confident cockpit starts to feel its years. It's one of the most-touched surfaces in the cabin, and it shows. These aluminum alloy steering wheel button patch covers are engineered specifically for these three models, sitting over each existing control button with a precision fit that looks entirely factory. Available in black or silver to complement your interior colour scheme, the machined alloy surface introduces a tactile quality and visual refinement that the original plastic simply can't match. With 11 individual covers in the set and a clean double-sided adhesive backing, the installation takes minutes and requires no specialist tools or professional fitting. It's one of the most impactful interior refreshes you can make to a high-mileage Discovery 4 or Sport — immediate, reversible, and thoroughly satisfying. What's Included 🔩 11× Steering Wheel Button Covers Aluminum alloy, pre-cut for direct fitment 🔲 Double-Sided Adhesive Backing Pre-applied to each cover for clean installation 📋 Fitment Guide Button placement reference included Product Highlights Machined aluminum alloy construction — far superior to OEM plastic in durability and feel Available in Black or Silver to suit your interior trim preference Full set of 11 covers to refresh all steering wheel button positions in one install Pre-applied double-sided adhesive for a clean, tool-free fitment Precision-cut profiles designed to match each button recess exactly Covers scuffed, faded, or worn OEM button surrounds instantly No modification to the steering wheel required — fully reversible Tactile improvement over stock — buttons feel more premium under fingertip Resistant to daily wear, UV exposure, and cleaning chemicals Adds a refined, understated upgrade to one of the cabin's most-used surfaces Compatibility Vehicle Year Range Code Fitment Land Rover Discovery 4 2010–2016 L319 Direct Fit Range Rover Sport 2010–2013 L320 Direct Fit Land Rover Freelander 2 2013–2015 L359 Direct Fit Range Rover Sport 2013–2020 L494 Verify Before Purchase Range Rover Vogue 2013–2020 L405 Not Compatible Land Rover Discovery 5 2017–2024 L462 Not Compatible Land Rover Defender 2020–2026 L663 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Clean the steering wheel button surrounds thoroughly with an isopropyl alcohol wipe and allow to dry completely. Remove any grease, skin oils, or polish residue to ensure the adhesive bonds properly. Identify each cover against your steering wheel layout using the fitment guide. The covers are individually shaped — lay them out before committing to any placement. Peel back the adhesive liner on the first cover, position it carefully over the corresponding button recess, and apply firm, even pressure for 10–15 seconds. Work your way across all 11 buttons systematically — starting from the centre and working outward helps maintain alignment. Allow the adhesive to cure for 30–60 minutes before normal use. Avoid heavy finger pressure on the covers during this window. ⚠ Note: Ensure your vehicle matches one of the confirmed compatible models before purchase. Steering wheel button layouts can vary between facelift and pre-facelift variants. If you are unsure of your exact specification, please contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Upgrade Your Discovery 4 Interior Today Browse the full range of Land Rover Discovery 4 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🚚 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for the purpose of fitment compatibility.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Aluminum Alloy Steering Wheel Button Stickers for Land Rover Discovery Sport 2015–2019 — Silver & Black A precision-cut, direct-fit upgrade that gives the Discovery Sport's steering wheel controls a richer, more premium finish — in just minutes, with no tools required. Discovery Sport L550 2015–2019 Aluminum Alloy Silver / Black Direct Fit No Drilling 10-Piece Set Interior Trim Overview The Land Rover Discovery Sport L550 was engineered as a refined, capable compact SUV — and for owners who love their vehicles, every detail of the cabin matters. The steering wheel is your most constant point of contact with the car, yet the factory button surrounds can look underwhelming when placed against a higher-spec interior or aftermarket upgrades. These aluminum alloy sticker overlays are designed to address that gap with a clean, confident upgrade. Each piece in this 10-part set is precision-cut from genuine aluminum alloy — not plastic, not chrome-effect film — and shaped to sit flush over the existing steering wheel button panels found on Discovery Sport models from 2015 through 2019. Available in silver and black finishes, they integrate naturally with both the light and dark interior trims common across SE, HSE, and HSE Luxury specification vehicles from this generation. Installation is entirely tool-free. A factory-grade double-sided adhesive backing holds each piece firmly in place without damaging the underlying buttons or trim. Whether you're refreshing a slightly tired cabin or simply elevating the feel of a well-maintained vehicle, these stickers deliver a result that's immediately noticeable — and built to last. What's Included 🎛️ Steering Wheel Button Stickers × 10 Full set — covers all primary steering wheel control zones 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-installed on each piece — ready to fit 🧤 Cleaning Prep Wipe For surface preparation prior to application 📋 Installation Guide Step-by-step fitment reference included in packaging Product Highlights Precision-cut aluminum alloy construction — not plastic or chrome film Available in silver and black to match your interior specification Direct-fit design for Discovery Sport L550 2015–2019 steering wheels Tool-free installation with pre-applied double-sided adhesive 10-piece complete set — covers all main control button areas No modification to original buttons, trim, or wiring required Resistant to everyday wear, UV exposure, and temperature variation Low-profile fit — does not impede button function or tactile feel Instantly refreshes cabin feel without a costly interior refurbishment Pairs well with other Discovery Sport interior trim upgrades Compatibility Vehicle Years Trim / Notes Fitment Land Rover Discovery Sport L550 2015–2019 SE, HSE, HSE Luxury — all standard steering wheels Direct Fit Land Rover Discovery Sport L550 2020–2024 Revised facelift steering wheel layout Not Compatible Land Rover Discovery 5 (L462) 2017–2024 Different steering wheel button configuration Not Compatible Range Rover Evoque L538 2012–2019 Shared platform but different wheel trim layout Not Compatible Range Rover Evoque L551 2019–2024 New generation — different steering wheel design Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  |  🔧 Difficulty: Beginner Begin with the steering wheel in its natural, centered position. Turn off the ignition and allow the wheel to cool if the vehicle has been recently driven. Use the included prep wipe to thoroughly clean each button surround area where the stickers will be applied. Remove any dust, oils, or residue and allow to dry completely — at least 60 seconds. Dry-fit each aluminum sticker against its corresponding button location before committing. Confirm orientation and alignment before removing the adhesive backing. Peel the protective backing from a single sticker. Carefully align it to the button surround and press down firmly from the centre outward to eliminate any air pockets. Hold firm pressure on each piece for 20–30 seconds. Repeat for all remaining stickers. Allow the adhesive to fully cure for 24 hours before heavy use or exposure to moisture for best long-term adhesion. ⚠ Note: Ensure the button surfaces are completely dry and free from silicone-based interior dressings or conditioners before applying. These products can significantly reduce adhesive bond strength. Do not apply in temperatures below 10°C (50°F). Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport accessories — from interior trim upgrades to exterior styling pieces — all curated specifically for your vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Product Description: Enhance your vehicle's storage capabilities with this high-quality aluminum alloy side window storage rack. Designed specifically for models from 2004-2016, this rack offers a sleek, durable solution for organizing your car's interior space. Product Highlights: Custom-fit design ensures seamless integration into compatible vehicles. Constructed from robust aluminum alloy for long-lasting durability. Easy to install, enhancing your vehicle's storage space effortlessly. Product Specifications: Material: High Quality Aluminum Alloy Color: Black Compatibility: Suitable for specific models from 2004-2016 Package Includes: 1 x Side Window Storage Rack Notes: If you have any questions, please contact us for assistance. Purchase protection and tracking are available.

Mercedes-Benz · E-Class W213 · Interior Trim Aluminum Alloy Tweeter Speaker Cover Trim – Mercedes-Benz E-Class W213 Premium aluminum speaker covers that elevate your cabin's aesthetic with a durable, wear-resistant finish. W213 2016–2017 Aluminum Alloy Matt Finish Direct Fit Pair Overview Designed specifically for the 2016–2017 Mercedes-Benz E-Class W213 (E200L and E300L models), these Aluminum Alloy Tweeter Speaker Cover Trims represent a precise, thoughtful upgrade to your vehicle's interior styling. The tweeter speaker area is often overlooked in cabin aesthetics, yet it remains highly visible from driver and passenger viewpoints. Crafted from high-quality aluminum alloy with a sophisticated matt finish, these covers integrate seamlessly with modern cabin design while providing genuine protection to your speaker components. The weight and finish communicate premium build quality, and the ISO9001 certification confirms manufacturing consistency and durability standards. Whether you're refreshing a well-loved E-Class or adding detail refinement to a recent purchase, this pair delivers lasting visual impact with practical wear resistance that won't degrade under daily use. What's Included 🎚️ Tweeter Speaker Covers Pair, aluminum alloy construction 🛠️ Ready to Install Pre-fitted design, minimal fastening required Product Highlights High-grade aluminum alloy material for superior durability Matt finish eliminates glare and maintains premium appearance Seamless integration with E-Class W213 cabin geometry Lightweight at 200g per pair – negligible impact on overall trim Wear-resistant coating withstands daily exposure and cleaning ISO9001 certified manufacturing for consistent quality Direct fit – no cutting, drilling, or modification required Protects speaker components from dust and minor contact Modern aesthetic suits both E200L and E300L variants Reversible investment – removes without permanent alteration Compatibility Model Year Engine Status Mercedes-Benz E-Class 2016–2017 E200L / E300L Direct Fit E-Class W213 2018+ All variants Verify First Other Mercedes Models Any All Not Compatible Note: Always confirm your vehicle's model year and tweeter speaker location before ordering. Photography or VIN-based verification is recommended for 2018+ E-Class vehicles. Installation Difficulty Level: Beginner | Time: 15–20 minutes Preparation: Disconnect the vehicle's negative battery terminal and allow 10 minutes for electrical systems to discharge fully. Locate tweeter speakers: Identify the tweeter speaker locations within your cabin – typically in the door panels or dashboard upper trim area. Consult your owner's manual for exact placement. Remove existing trim (if applicable): Gently pry away any original speaker grilles using a plastic trim tool to avoid scratching surrounding surfaces. Position new covers: Align the aluminum alloy cover trims with the speaker aperture, ensuring flush seating against the cabin panel. Secure fastening: Use the included or OEM-specification fasteners to attach covers. Do not over-tighten – gentle, even pressure is sufficient. Final inspection: Verify that both covers sit level and are free of gaps or misalignment. Reconnect the negative battery terminal. Test audio: Power up your infotainment system and confirm tweeter speaker function at moderate volume. ⚠️ Important: Always confirm fastener compatibility with your vehicle's interior trim material. If you are unfamiliar with automotive electrical disconnection procedures, professional installation is strongly recommended. Improper fastening may damage interior components or compromise speaker function. Ready to Elevate Your E-Class Interior? These aluminum alloy tweeter speaker covers deliver the detail refinement that separates a good cabin from a great one. Built to last, certified for quality, and designed for your exact model—this is interior upgrade that you'll notice every drive. Shop Tweeter Speaker Covers Use code 22GET20 for 20% off any 2 items 30-Day Money-Back Guarantee ISO9001 Certified Worldwide Shipping 4.9★ / 12,300+ Reviews Disclaimer: This product is not affiliated with, endorsed by, or manufactured by Mercedes-Benz AG or any of its subsidiaries. All references to Mercedes-Benz models, trademarks, and specifications are for identification and compatibility purposes only. Always verify fitment with your specific vehicle before purchase. Victorious Automotive is an independent aftermarket accessory retailer.

Victorious · Defender 90/110/130 · Interior Aluminum Alloy Umbrella Holder – Defender 90/110/130 Premium under-seat storage keeps your essentials organized and your cabin clutter-free. Defender 90/110/130 2004–2018 Aluminum Alloy Passenger Seat Direct Fit Overview Land Rover Defender 90, 110, and 130 owners understand the value of purposeful interior design. Every cubic inch counts when you're balancing daily utility with expedition readiness. This aluminum alloy umbrella holder mounts seamlessly beneath the passenger seat, reclaiming wasted space and providing dedicated storage for umbrellas, documents, or small gear without compromising cabin ergonomics. Engineered from aerospace-grade aluminum alloy, this holder combines durability with weight efficiency—critical for vehicles where every kilogram affects performance and fuel economy. The sleek black finish integrates seamlessly with Defender's utilitarian aesthetic, adding function without fanfare. Custom-engineered geometry ensures a direct fit across all three Defender variants (90, 110, 130) from 2004 through 2018 production runs. Whether you're managing daily commute clutter or organizing expedition supplies, this holder prevents items from rolling beneath seats during off-road articulation. It's the kind of small, thoughtful detail that separates a well-ordered cabin from chaos. What's Included 📦 1× Aluminum Alloy Umbrella Holder Ready to install, pre-engineered for Defender 🔧 Hardware & Fixings All fasteners included for direct fitment 📖 Installation Guide Step-by-step instructions with diagrams ✓ 30-Day Money-Back Guarantee Full refund if not completely satisfied Product Highlights Aerospace-grade aluminum alloy construction—lightweight yet rigid Black anodized finish resists corrosion and UV fade Direct-fit engineering for Defender 90, 110, 130 (2004–2018) Mounts under passenger seat—zero impact on cabin space Secure umbrella and small-item retention Tested for off-road vibration and articulation Tool-free installation in under 10 minutes Manufactured to ISO 9001 quality standards Compatible with all interior trim levels and configurations Backed by Victorious' 30-day guarantee and lifetime support Compatibility Model Years Engine Status Defender 90 2004–2018 All Direct Fit Defender 110 2004–2018 All Direct Fit Defender 130 2004–2018 All Direct Fit Defender 90 (Post-2020 L663) 2020+ All Not Compatible Defender 110 (Post-2020 L663) 2020+ All Not Compatible Installation Difficulty Level: Beginner | Time: 8–12 minutes Ensure vehicle is parked on level ground with parking brake engaged. Locate the under-seat mounting bracket points on your Defender's passenger side. Clean the mounting surface with a dry cloth to ensure good contact. Position the umbrella holder assembly against the bracket points, aligning all fastener holes. Insert all provided bolts through the holder and into the seat frame threads. Hand-tighten all fasteners first, then use a torque wrench to final-tighten to specification (12 Nm recommended). Test fit by gently pulling the holder—it should not move or rattle. Insert your umbrella to verify clearance and secure retention. Safety Note: Ensure the holder does not obstruct passenger leg room, emergency exit procedures, or seat adjustment mechanisms. Test all seat adjustments after installation to confirm full range of motion. Complete Your Cabin Setup Small touches of engineering precision define the Defender experience. A well-organized interior isn't a luxury—it's a mark of respect for your vehicle and the journeys it carries you on. Browse Defender Interior Upgrades Use code 22GET20 for 20% off any 2 items ✓ 4.9★ · 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS, TNT shipping ✓ Mon–Fri 9am–7pm support +44 203 943 9919 Victorious Automotive is an independent accessory specialist. We are not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All trademarks, logos, and brand names are the property of their respective owners. Product compatibility is based on OEM specifications and Victorious engineering standards. Always consult your vehicle's service manual before installation. Victorious assumes no liability for improper installation or misuse.

Victorious Automotive · Land Rover Discovery Sport L550 · Interior Trim Aluminum Alloy Window Button Cover Stickers for Land Rover Discovery Sport L550 (2019–2020) Precision-cut aluminium alloy covers that upgrade your Discovery Sport's window switch panel from factory plastic to a refined, metal-finished surface — with zero modification required. Discovery Sport L550 2019–2020 Aluminum Alloy Silver Finish Direct Adhesive Fit Interior Trim Window Button Cover No Drilling Required Overview The Land Rover Discovery Sport L550 is a refined compact SUV that walks a confident line between practicality and premium feel. The 2019 and 2020 model years brought meaningful interior upgrades, yet one area that still speaks plainly from the factory is the window switch surround — functional, but visually understated against the rest of the cabin's ambition. These Aluminum Alloy Window Button Cover Stickers are designed with that gap in mind. Machined from high-grade aluminium alloy and finished in a brushed silver tone, each cover lays cleanly over the existing window button panel, introducing a cool metallic contrast that reads immediately as an intentional, premium upgrade. The result is an interior that feels more cohesive — closer to the executive specification many Discovery Sport owners aspire to. Installation requires no tools, no drilling, and no specialist knowledge. A precision-grade adhesive backing bonds directly to the existing switch surface, holding securely without damaging the original trim underneath. Whether you're building out a full interior refresh or simply want one focused, visible improvement, this is one of the most rewarding upgrades available for the L550's cabin. What's Included 🪟 Window Button Cover Set Full set of aluminium alloy sticker covers for window switch panel 🔧 Pre-Applied Adhesive Precision adhesive backing pre-fitted to each cover piece 🧹 Cleaning Wipe Surface prep wipe for clean adhesion before fitting 📄 Fitting Guide Step-by-step instruction sheet for straightforward installation Product Highlights Precision-cut aluminium alloy construction built to last the life of the vehicle Brushed silver finish that integrates naturally with the L550's interior palette Pre-applied, high-bond adhesive backing for a firm, rattle-free fit Exact-fit design engineered specifically for the 2019–2020 Discovery Sport L550 Protects original window buttons from scratches, wear, and surface degradation Tool-free installation — no drilling, no cutting, no professional fitting required Lightweight material adds visual premium without altering ergonomics Fully reversible — can be removed without damaging factory trim beneath Corrosion-resistant alloy maintains its finish in all cabin temperature conditions Elevates the overall interior feel alongside other trim and switch upgrades Compatibility Vehicle Code Year Range Fit Land Rover Discovery Sport L550 2019–2020 Direct Fit Land Rover Discovery Sport L550 2015–2018 Not Confirmed Land Rover Discovery Sport L550 2021–2024 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Land Rover Discovery 5 L462 2017–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–15 Minutes  |  🔩 Tools Required: None Begin with your vehicle parked on a level surface with the ignition off. Allow the interior to reach ambient temperature — avoid fitting in very hot or very cold conditions. Use the included cleaning wipe to thoroughly clean the surface of each window button panel. Remove any dust, oils, or residue and allow to dry completely for at least two minutes. Carefully peel the protective film from the adhesive backing of the first cover piece, taking care not to touch the adhesive surface with your fingers. Align the cover precisely over the corresponding window button panel. Use the cutouts as guides — do not press down until you are fully satisfied with alignment. Once aligned, apply firm, even pressure across the entire cover surface for 20–30 seconds to activate the adhesive bond. Repeat the process for each remaining cover piece. Allow 30–60 minutes of settling time before regular use of the window buttons. ⚠ Important: Confirm your exact model year before fitting. The L550 Discovery Sport underwent interior panel revisions across its production run — these covers are confirmed for 2019–2020 specification only. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Discovery Sport Interior Explore our full range of Land Rover Discovery Sport accessories — from interior trim upgrades to exterior styling and protective accessories, curated specifically for L550 owners who take pride in every detail. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Tailgate Accessories Aluminum Black Folding Tailgate Shelf Table for Land Rover Defender L663 (2020–2022) A precision-engineered folding shelf table that transforms your Defender's tailgate into a fully functional workstation or outdoor prep surface — without modification or compromise. Defender L663 2020–2022 Aluminum Alloy Folding Design Matte Black Tailgate Mount No-Drill Install Defender 90 & 110 Overview The Land Rover Defender L663 was built for those who push beyond the tarmac — and the lifestyle that surrounds it demands equipment that keeps pace. Whether you're running technical trails, heading into remote wilderness, or simply making the most of a weekend outdoors, the Defender's rear load area is one of its most functional assets. This tailgate shelf table is engineered specifically to complement that capability. Constructed from high-grade aluminum alloy and finished in a sleek matte black, this folding shelf mounts securely to the interior of the tailgate via screw fixation — no drilling into body panels, no permanent modification. When deployed, it provides a stable, flat surface ideal for trail-side prep work, gear organisation, photography kit, laptops, or outdoor cooking setups. When not in use, it folds flat and disappears cleanly against the tailgate, leaving the load area completely unobstructed. Designed with the dimensions and door architecture of the L663 Defender 90 and 110 in mind, fitment is precise and the finished result looks factory-intentional. The matte black finish pairs naturally with the Defender's rugged interior aesthetic, and the aluminum construction ensures it handles real-world loads without flexing or rattling. Produced in an ISO9001-certified facility, this is a shelf built to the same standard of expectation that Defender owners hold for everything else on their vehicle. What's Included 🗂️ Folding Tailgate Shelf Table 1x aluminium alloy unit, matte black finish 🔩 Mounting Hardware Screw fixation kit included for direct install 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-fit design engineered specifically for the L663 Defender 90 and 110 (2020–2022) High-grade aluminum alloy construction delivers strength without adding unnecessary weight Matte black finish integrates seamlessly with the Defender's interior and exterior styling Compact folding mechanism allows full retraction when the shelf isn't needed Screw fixation mounting system provides a secure, rattle-free connection at all times No permanent modification or drilling into body panels required during installation Provides a stable, level surface for trail prep, gear management, and outdoor use Manufactured in an ISO9001-certified facility to strict quality control standards Brand new condition — 100% unused, tested, and ready to fit straight from the box Fully compatible with both left-hand drive and right-hand drive L663 configurations Compatibility Model Year Range Variant Fitment Defender 110 (L663) 2020–2022 All trim levels Direct Fit Defender 90 (L663) 2020–2022 All trim levels Direct Fit Defender 130 (L663) 2022+ All trim levels Verify Before Purchase Defender L663 (2023+) 2023–2026 All variants Verify Before Purchase Defender 90/110 (pre-2020) Pre-2020 Legacy / Classic Not Compatible Range Rover / Discovery All years All variants Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools: Screwdriver Open your Defender's tailgate fully and ensure the interior panel surface is clean and dry before beginning fitment. Position the shelf table bracket assembly against the tailgate interior at the designated mounting points — use the included template or test-fit to confirm alignment before marking. Using the supplied screw hardware, fasten the mounting brackets securely to the tailgate panel. Do not overtighten — firm hand-tightening with a screwdriver is sufficient. Attach the shelf table platform to the mounted bracket and confirm the fold mechanism operates smoothly in both the deployed and stowed positions. Apply light pressure to the deployed shelf to verify stability before use. If any movement is detected, check all fixings are fully engaged. ⚠ Note: Always ensure all mounting screws are secure before loading the shelf surface. Avoid placing items exceeding the shelf's intended load capacity. If you are unsure about any step in the installation process, we recommend consulting a qualified Land Rover technician or calling our team on +44 203 943 9919. Built for the Way You Use Your Defender Explore the full range of Defender L663 interior and tailgate accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide with a 4.9/5 star rating. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, endorsed by, or associated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.