Products

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim ABS Chrome Rear Windscreen Wiper Frame Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-cut chrome trim cover that frames the rear wiper housing with a polished, factory-finish aesthetic — no drilling, no fuss, no compromise. Discovery Sport L550 2015–2019 ABS Chrome Rear Wiper Trim Adhesive Fit 3-Piece Set Silver & Black Options Exterior Styling Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that rewards careful attention to detail — from its confident road presence to its meticulously resolved bodywork. For owners who take pride in maintaining or elevating every panel and surface, the rear tailgate area is often an overlooked opportunity. The factory-fitted rear wiper housing, while functional, lacks the visual refinement that the rest of the body deserves. This ABS chrome rear windscreen wiper frame cover trim changes that. Designed specifically for the Discovery Sport's rear wiper architecture, each piece wraps around the existing housing with a tight, gap-free fit. The chrome-plated ABS surface catches light cleanly, adding a bright metallic accent that reads as genuinely premium — not aftermarket. Whether you're finishing off a full exterior chrome kit or simply adding a single considered touch to the rear of your Discovery Sport, this trim delivers a visual upgrade that punches well above its price point. It requires no modification to your vehicle and can be installed in under ten minutes using the included 3M-grade adhesive backing. What's Included ✨ Wiper Frame Cover × 3 Full 3-piece chrome trim set for the rear wiper housing 🔲 Pre-applied Adhesive Tape 3M-grade double-sided tape pre-fitted to each piece 🧽 Cleaning Wipe Surface prep wipe for a clean, secure bond 📄 Fitting Guide Step-by-step instruction sheet included Product Highlights Precision-cut to match Discovery Sport L550 rear wiper housing geometry High-gloss chrome-plated ABS — resistant to UV fading and surface tarnish Lightweight construction — adds zero meaningful weight to the tailgate 3M-grade adhesive backing for a firm, rattle-free bond No drilling, cutting or professional fitting required Available in Silver Chrome and Gloss Black finish options 3-piece set for full coverage of the rear wiper surround Compatible with both petrol and diesel Discovery Sport variants Pairs perfectly with door handle, mirror and grille chrome trim kits Removable without paint damage when correct removal technique is used Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015–2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020–2024 Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Evoque L538 / L551 2011–2024 Not Compatible Range Rover Sport L494 / L461 2013–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 minutes  ·  🛠 Tools Required: None Thoroughly clean the rear wiper housing and surrounding paintwork using the included prep wipe. Ensure the surface is completely dry and free of wax, grease or polish residue. Dry-fit each of the three trim pieces against the wiper frame without removing the adhesive backing. Confirm alignment and panel coverage before committing. Remove the adhesive backing liner from the first trim piece. Starting from one end, carefully press the trim into position using firm, even pressure across the full length. Repeat for the remaining two trim pieces, ensuring tight joins between each section where applicable. Apply firm pressure across all surfaces for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing to rain or washing. ⚠ Note: Install in ambient temperatures above 10°C for optimal adhesive performance. Avoid installing in direct sunlight or on a hot surface. Do not use a pressure washer directly against the trim edges within the first 48 hours of installation. Explore More Discovery Sport Accessories Looking to extend the chrome detail further across your Discovery Sport? Browse our full collection of exterior and interior accessories — including door handle covers, mirror caps, grille surrounds and dashboard trim — all curated specifically for the L550. → Shop All Land Rover Discovery Sport Accessories Built for Land Rover Owners Who Notice the Details Trusted by over 12,300 Land Rover and Range Rover owners worldwide. Every order ships via DHL, FedEx or UPS — with worldwide delivery and a 30-day money-back guarantee. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by or approved by Land Rover, Jaguar Land Rover (JLR) or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Mercedes-Benz · Interior Trim ABS Chrome Side Air Conditioning Vent Trim Cover for Mercedes-Benz E-Class W213 Elevate your cabin aesthetics with premium carbon fiber vent rings—sophisticated detailing that transforms your E-Class interior. W213 2016–2017 Carbon Fiber ABS Adhesive Installation Lightweight Design Overview Mercedes-Benz E-Class W213 owners know the value of thoughtful interior refinement. Your cabin is where you spend every journey, and every detail matters. These ABS Chrome Side Air Conditioning Vent Trim Covers deliver the premium finish your E-Class deserves—a subtle yet impactful upgrade that signals attention to quality. Designed specifically for 2016–2017 E-Class models, these vent rings feature authentic carbon fiber detailing combined with chrome accents. The lightweight ABS plastic construction ensures durability without adding weight, while the sleek profile complements OEM styling. Installation is straightforward using automotive-grade adhesive tape, requiring no tools or modifications to your vehicle. Why these covers work: They fill the visual gap in your climate control zone with a cohesive, luxury aesthetic. The carbon fiber finish pairs beautifully with modern dashboard trim, while the chrome elements catch light and add depth. For owners who value understated elegance, this is the detail that transforms your interior. What's Included 📦 Vent Ring Cover Set Complete set of side AC vent trim covers ✦ Adhesive Tape Pre-applied automotive-grade installation tape 📋 Instructions Step-by-step installation guide included Product Highlights Carbon fiber finish with premium lustre and authentic texture Chrome accents for sophisticated visual contrast and light reflection Lightweight ABS plastic construction—durable and impact-resistant Pre-applied adhesive tape for tool-free installation in under 5 minutes Precision fit for 2016–2017 E-Class W213 models ISO9001 certified manufacturing for quality assurance No drilling, cutting, or OEM modification required Complements factory climate control design seamlessly Resistant to fading and UV exposure 30-day money-back guarantee—risk-free upgrade Compatibility Model Year Range Engine Compatibility Mercedes-Benz E-Class W213 2016–2017 All Direct Fit Mercedes-Benz E-Class W213 2018+ All Check Fitment E-Class W212 (Pre-2016) 2009–2015 All Not Compatible Other Mercedes Models — — Not Compatible Installation Difficulty Level: Beginner | Time: 5 minutes Prepare surfaces: Clean and dry both the vent ring area and the back of the cover with a soft cloth. Remove any dust or residue. Test fit: Position the cover over the vent opening to confirm alignment before removing adhesive backing. Apply cover: Peel back the adhesive tape and press the cover firmly into place, starting from the centre and working outward to avoid air bubbles. Secure: Apply even pressure across the entire surface for 10–15 seconds to ensure a permanent bond. Cure: Allow 24 hours before adjusting your climate control vents to let adhesive fully set. ⚠ Important: Ensure the surface is completely clean and dry before installation. Do not install in cold conditions (below 10°C) as adhesive performance may be compromised. If repositioning is needed, gently peel away and reapply to a clean surface. Upgrade Your E-Class Interior Today Transform your cabin with these premium carbon fiber vent covers. A small detail. A significant upgrade. Experience the Victorious difference. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day guarantee – risk-free returns ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or Jaguar Land Rover. All brand names and trademarks are the property of their respective owners. Product descriptions, compatibility, and fitment information are provided for reference only. Always verify fitment with your vehicle's specific VIN or consult a qualified technician before purchase. Victorious Automotive assumes no liability for improper installation or use.

Victorious Automotive · Land Rover Discovery 3 & 4 · Interior Trim ABS Chrome & Black Air Outlet Adjusting Rod Cover Trim Stickers — Land Rover Discovery 3 & 4 (LR3 / LR4) A simple, high-impact interior upgrade that replaces the look of tired factory air vent rods with precision-formed ABS trim covers — available in chrome or gloss black to suit your cabin aesthetic. LR3 · LR4 2004–2016 ABS Plastic Chrome & Black Direct Fit No Drilling Interior Trim Set of 4 Overview The Land Rover Discovery 3 and Discovery 4 are known for their commanding presence, genuine off-road capability, and a cabin that was designed around practicality as much as refinement. Over time, however, small interior details — particularly the exposed plastic adjusting rods on the dashboard air vents — can begin to look dated or worn, detracting from an otherwise well-appointed interior. These ABS chrome and black air outlet adjusting rod cover trim stickers are purpose-built for the LR3 and LR4, wrapping the vent adjustment rods in a clean, finished layer that instantly modernises the dashboard. Available in polished chrome for a premium, factory-upgrade look, or gloss black for a blacked-out, contemporary feel, each cover is shaped to follow the exact profile of the original rods with no gap or overhang. Manufactured from high-grade ABS plastic, these covers resist everyday heat and UV exposure, making them a long-lasting addition rather than a temporary cosmetic fix. Installation requires no tools, no cutting, and no modification — simply clean the surface, peel, and press. The result is a noticeably more refined dashboard that takes minutes to achieve. What's Included 💨 Air Vent Rod Cover Trims × 4 Full set covering all four dashboard air outlet adjusting rods 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-fitted to each cover for immediate installation 📋 Installation Guide Step-by-step instructions included in the package Product Highlights Precision-formed to fit LR3 and LR4 air vent adjusting rods exactly Available in polished chrome or gloss black to complement your interior High-grade ABS plastic construction — rigid, heat-resistant, and durable Pre-applied double-sided adhesive for a clean, tool-free installation No drilling, cutting, or modification required to the original vehicle UV-stable finish that won't fade or yellow over time Adds a premium factory-upgrade aesthetic to a commonly overlooked detail Covers the full set of four dashboard air outlet rods in one kit Compatible with all trim levels of Discovery 3 and Discovery 4 Fully reversible — original rods remain intact beneath the covers Compatibility Vehicle Code Years Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L322 L322 2002–2012 Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🛠 Difficulty: Beginner Begin with the vehicle parked in a clean, dry environment at room temperature. Avoid installing in cold or damp conditions as this can affect adhesive bonding. Using a clean microfibre cloth and a small amount of isopropyl alcohol, thoroughly clean each air vent adjusting rod to remove any dust, grease, or silicone residue. Allow the cleaned surfaces to dry completely — approximately 2–3 minutes — before proceeding. Hold each trim cover against its corresponding rod to confirm orientation and fit before removing the adhesive backing. Peel the protective film from the adhesive backing on the first cover, align carefully, and press firmly into position for 30–60 seconds to ensure full contact. Repeat for the remaining three covers, working across the dashboard methodically. Allow 2–4 hours for the adhesive to fully cure before operating the vent adjustment rods. Note: Do not apply excessive force to the vent rods immediately after installation. Allow the adhesive to set fully before normal use. If repositioning is needed, do so gently within the first 60 seconds of application before the bond cures. Complete Your Discovery's Interior Browse the full range of Discovery 3 and Discovery 4 interior accessories at Victorious Automotive — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions. Shop Discovery 3 Accessories   Shop Discovery 4 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 3 / Freelander 2 · Interior Trim ABS Chrome & Black Steering Wheel Cover Trim — Land Rover Discovery 3 (LR3) & Freelander 2 A precision-moulded steering wheel surround trim that replaces factory plastic with a refined chrome and black ABS finish — purpose-built for the Discovery 3 and Freelander 2 interior. Discovery 3 / LR3 Freelander 2 2004–2009 2007–2012 ABS Plastic Chrome Finish Black Finish Adhesive Fit Interior Trim No Drilling Overview The Land Rover Discovery 3 (LR3) and Freelander 2 were benchmarks for capable, well-equipped SUVs when launched — and their interiors still hold up well. But over the years, the factory steering wheel surround can show its age: faded plastics, light scratches, and a general lack of visual refinement are common complaints from owners who care about how their cabin presents. This ABS steering wheel cover trim is designed specifically to address that. Manufactured from high-grade ABS plastic with a chrome and black dual-tone finish, it sits over the existing steering column surround to deliver an instantly elevated look. The chrome detailing catches ambient light cleanly, while the black sections maintain a composed, premium feel consistent with an upmarket interior upgrade. Fitment is achieved via automotive-grade adhesive tape — no drilling, no permanent modification, and no specialist tools required. For Discovery 3 owners looking to sharpen their interior without committing to a full cabin renovation, this trim offers serious visual return for minimal outlay. What's Included 🎁 Steering Wheel Cover Trim 1 complete set — chrome and black ABS finish 🔧 Adhesive Mounting Tape Pre-applied automotive-grade 3M-style tape 📋 Fitment Instructions Step-by-step installation guidance included Product Highlights Precision-moulded ABS construction for a close factory-style fit Dual-tone chrome and black finish for a modern, upmarket aesthetic Compatible with both Discovery 3 (LR3) and Freelander 2 platforms Covers years 2004–2009 (Discovery 3) and 2007–2012 (Freelander 2) No drilling or permanent modification required for installation Automotive adhesive tape included — clean and secure bond Lightweight design — no impact on steering feel or airbag operation Resistant to everyday wear, UV fading, and cabin temperature cycles Direct replacement aesthetic upgrade over tired OEM plastic surrounds Available in Black and Silver (chrome) colour combination Compatibility Vehicle Model Code Years Fitment Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Freelander 2 L359 2007–2012 Direct Fit Land Rover Discovery 4 L319 Facelift 2009–2016 Verify Before Purchase Land Rover Freelander 1 L314 1997–2006 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: 15–30 minutes  |  🔧 Difficulty: Beginner-Friendly Park your vehicle on a flat surface and switch off the ignition. Allow the interior to reach ambient temperature before beginning. Thoroughly clean the existing steering wheel surround area using an isopropyl alcohol wipe. Remove all dust, oils, and residue to ensure maximum adhesive bond strength. Dry-fit the trim piece first without removing the adhesive backing — check alignment and panel positioning before committing. Peel the backing from the adhesive tape. Align the trim carefully with the steering column surround, working from the centre outward. Apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond fully. Allow a minimum of 24 hours before exposing the trim to extreme temperatures or heavy use, to allow the adhesive to cure fully. ⚠ Important: This trim fits around the steering column surround — not the steering wheel itself. It does not interfere with the airbag system. However, if you have any concerns about proximity to airbag components, professional installation is recommended. Always confirm exact compatibility with your vehicle's build date and specification before fitting. Complete Your Discovery 3 Interior Browse our full range of Land Rover Discovery 3 interior accessories — from dash trim overlays to door handle covers and gear surround upgrades. Every part is selected with the serious enthusiast in mind. Shop Discovery 3 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle build date and specification before purchase.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Chrome & Black Side Air Conditioning Vent Outlet Covers — Land Rover Discovery 3 LR3 (2004–2009) A precision-fit interior trim upgrade that refreshes your Discovery 3's side A/C vents with a clean, modern finish — available in Chrome, Black, and Black Wood Grain. Discovery 3 LR3 2004–2009 ABS Material Direct Fit Chrome / Black Interior Moulding No Drilling ISO9001 Certified Overview The Land Rover Discovery 3 — known internationally as the LR3 — was built as a serious go-anywhere machine with a cabin designed for comfort over long distances. If yours has covered some miles, the side air conditioning vent surrounds are often one of the first areas to show their age: faded plastics, light scuffs, and a general lack of the premium feel the rest of the interior still carries. These covers address that directly. Manufactured from high-grade ABS plastic with a chrome or black surface finish, these side A/C vent outlet covers are precision-moulded to the exact dimensions of the Discovery 3 LR3 dashboard vents. The fitment is flush and secure, and the three finish options — Chrome, Gloss Black, and Black Wood Grain — each bring a distinctly different character to the cabin. Chrome adds a refined, contemporary edge; Gloss Black keeps things understated and dark; Black Wood Grain offers a warm, classic cockpit feel. Backed by ISO9001 quality certification and supplied with automotive-grade adhesive tape pre-applied, this is a straightforward weekend upgrade that makes a visible difference the moment you close the door. No tools required, no irreversible modifications — just a noticeably cleaner, more polished interior. What's Included 🪟 Side A/C Vent Covers One full set — all side vent surrounds included 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape on reverse 📋 Installation Guide Simple step-by-step fitting instructions 📦 Protective Packaging Individually packed to prevent transit damage Product Highlights Precision-moulded for Discovery 3 LR3 2004–2009 — exact OEM dimensions Three finish options: Chrome, Gloss Black, Black Wood Grain High-grade ABS construction — impact resistant and long-lasting Pre-applied automotive adhesive tape for tool-free installation ISO9001 certified manufacturing — consistent quality control Flush, factory-style fitment with no gaps or misalignment Lightweight at 300g — no effect on vent airflow or function UV-stable surface finish — resists fading in direct sunlight Fully reversible upgrade — no permanent modifications required Dimensions: 30cm (L) × 15cm (W) × 10cm (H) per set Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 3 LR3 2004–2009 Direct Fit Land Rover Discovery 4 LR4 2009–2017 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Thoroughly clean the existing vent surrounds with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesion. Unbox your vent covers and test-fit each piece against the corresponding vent without removing the adhesive backing, checking for alignment. Once satisfied with the fitment, peel the protective film from the pre-applied adhesive tape on the reverse of each cover. Align the cover carefully over the vent surround, starting from one edge and pressing down gradually to avoid trapping air bubbles. Apply firm, even pressure across the entire surface of each cover and hold in place for 30–60 seconds. Allow the adhesive to cure fully at room temperature for 2–4 hours before operating the A/C or exposing to extreme temperatures. Note: Ensure your Discovery 3 has been parked at ambient temperature before fitting. Applying covers in very cold or very hot conditions may reduce initial adhesive performance. If you are uncertain about any step, professional fitting is always recommended. Complete Your Discovery 3 Interior Explore the full range of Discovery 3 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide, with a 4.9/5 star rating and a 30-day money-back guarantee on every order. Shop Discovery 3 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL & FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Chrome & Black Window Lift Switch Button Cover Stickers for Land Rover Discovery 3 LR3 (2004–2009) A precise, peel-and-press interior upgrade that refreshes every window switch panel on your LR3 — available in Chrome, Black, and Black Wood Grain finishes. Discovery 3 · LR3 2004–2009 ABS Material Chrome / Black / Wood Grain Adhesive Tape Fit ISO9001 Certified Interior Trim Model LLK2841 Overview The Land Rover Discovery 3 — known in North America as the LR3 — remains one of the most capable and characterful Land Rovers ever built. Produced from 2004 to 2009, it offered a genuinely sophisticated interior for its era, and owners who've held onto theirs know that keeping the cabin looking sharp is part of the pride of ownership. Over time, high-contact areas like window lift switch surrounds can show wear, fading, or simply begin to look dated against an otherwise well-maintained interior. These ABS Window Lift Switch Button Cover Stickers are engineered specifically to overlay the window switch panels in the Discovery 3 cabin. Available in Chrome, Black, and Black Wood Grain, they allow you to either restore a factory-fresh appearance or subtly elevate the interior aesthetic to something more modern. The covers are moulded from durable ABS plastic, finished to a high tolerance, and backed with automotive-grade adhesive that holds firm across temperature cycles — including the kind of range the LR3 sees on real-world terrain. Installation requires no tools, no drilling, and no modification to your vehicle. The adhesive tape backing bonds cleanly to the existing switch housing, and once seated, the covers sit flush with the surrounding trim — looking every bit like a factory detail rather than an aftermarket add-on. For LR3 owners who take their interior as seriously as their off-road capability, this is a small change with a genuinely noticeable result. What's Included 🪟 Window Switch Cover Stickers Full set for Discovery 3 window lift panels 🔲 Pre-Applied Adhesive Tape Automotive-grade backing — no separate adhesive needed 📋 Installation Guide Step-by-step fitting reference included Product Highlights Precision-moulded for a flush, factory-style fit on the LR3 window switch panels Available in three finishes: Chrome, Gloss Black, and Black Wood Grain Manufactured from high-grade ABS plastic for durability and rigidity Pre-applied automotive adhesive tape for a clean, tool-free installation ISO9001 certified production — consistent quality across every unit Resistant to temperature variation — won't lift or bubble in heat or cold Covers minor scratching, fading, or wear on existing switch surrounds Lightweight at 200g — no impact on switch mechanism or function Fits all Discovery 3 / LR3 variants produced from 2004 to 2009 Reversible upgrade — can be removed without damage to original trim Compatibility Vehicle Code Year Range Fit Land Rover Discovery 3 (LR3) L319 2004–2009 Direct Fit Land Rover Discovery 3 — All Trim Levels L319 2004–2009 Direct Fit Land Rover Discovery 4 (LR4) L319 2009–2016 Not Confirmed Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L322 L322 2002–2012 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature — avoid fitting in very cold or very hot conditions, as extreme temperatures can affect initial adhesive bonding. Thoroughly clean each window switch panel surface using an IPA (isopropyl alcohol) wipe or clean microfibre cloth. Remove any dust, oils, or residue completely and allow to dry. Dry-fit each cover sticker against its corresponding switch panel to confirm alignment before removing the adhesive backing. Peel the adhesive backing from the first cover sticker. Align carefully — starting from one edge — and press down firmly across the full surface, working out any air from the centre outward. Apply firm, even pressure across the entire cover for 30–60 seconds to fully activate the adhesive bond. Repeat for each remaining switch panel cover. Allow 24 hours for the adhesive to fully cure before heavy use. ⚠ Important: Do not apply to damp or recently cleaned (still wet) surfaces. Adhesion will be significantly compromised. Ensure all surfaces are completely dry and free of wax, polish, or silicone-based products before fitting. Built for Discovery 3 Owners Who Care At Victorious Automotive, we supply interior and exterior accessories exclusively for Land Rover, Range Rover, and Defender owners. Every product we carry is selected for fit, finish, and longevity — not just price. Browse our full Discovery 3 collection or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like a recommendation. Shop All Discovery 3 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Chrome, Black & Wood Grain Interior Door Handle Bowl Covers – Land Rover Discovery 3 (2004–2009) A precision-fit interior upgrade that guards your door handle recesses and instantly elevates the cabin aesthetic of your Discovery 3 — with zero tools required. Discovery 3 L319 2004–2009 ABS Plastic Chrome Finish Black Finish Wood Grain Finish Direct Fit No Tools Required Set of 4 Interior Trim Overview The Land Rover Discovery 3 remains one of the most capable and characterful off-roaders ever produced — a vehicle that loyal owners continue to maintain, improve, and cherish long into its service life. Whether you're using it as a daily driver, a towing workhorse, or a weekend overlander, the interior deserves the same care you give to the mechanicals beneath it. These ABS door handle bowl covers are designed to sit neatly inside each interior door pull recess, covering the scuff-prone area that takes the most daily contact inside the cabin. Available in chrome, gloss black, and wood grain finishes, each cover is moulded to precisely match the contours of the Discovery 3's factory door card, delivering a factory-integrated look without the factory price tag. Made from durable ABS plastic with a high-quality surface finish, these covers bond securely using pre-applied automotive-grade adhesive tape — the same type used by OEM manufacturers for trim applications worldwide. Installation is clean, quick, and permanent, with no drilling, clipping, or professional fitting required. What's Included 🚪 Front Left Door Bowl Cover Driver-side front door recess 🚪 Front Right Door Bowl Cover Passenger-side front door recess 🚪 Rear Left Door Bowl Cover Driver-side rear door recess 🚪 Rear Right Door Bowl Cover Passenger-side rear door recess 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style bonding tape Product Highlights Precision-moulded ABS shell matches Discovery 3 door card contours exactly Available in chrome, gloss black, and wood grain to suit your interior theme Protects factory plastic from fingernail scratches and daily wear Pre-applied automotive adhesive tape — no tools, clips, or mess High-gloss or woodgrain surface finish resists fading and peeling Full set of four covers — all doors catered for in one purchase Lightweight ABS construction adds negligible weight to door panels Seamless fitment looks factory-fitted once installed Cost-effective alternative to full door card replacement Compatible across the entire 2004–2009 Discovery 3 model range Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 3 SE L319 2004–2009 Direct Fit Land Rover Discovery 3 HSE L319 2004–2009 Direct Fit Land Rover Discovery 3 S L319 2004–2009 Direct Fit Land Rover Discovery 3 GS L319 2004–2009 Direct Fit Land Rover Discovery 4 L319 Facelift 2009–2016 Verify Before Ordering Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Open all four doors and inspect each door handle bowl recess for condition. These covers work best on clean, smooth original surfaces. Wipe each recess thoroughly with an isopropyl alcohol (IPA) wipe or clean microfibre cloth to remove any oils, dust, or polish residue. Allow to dry fully for 2–3 minutes. Test-fit each cover into its corresponding recess without removing the adhesive backing to confirm correct alignment and orientation. Peel the protective backing from the pre-applied adhesive tape on the rear of the cover — avoid touching the adhesive surface. Press the cover firmly into position in the door bowl recess, applying firm and even pressure for 30–60 seconds across the entire surface. Repeat for all four doors. Allow adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing to heavy moisture. ⚠ Note: Ensure the ambient temperature during installation is above 10°C (50°F) for optimal adhesive bonding. Do not attempt installation in cold or damp conditions. Once bonded, removal may damage the original door card surface. More for Your Discovery 3 Browse our full range of Discovery 3 interior and exterior accessories — designed for owners who refuse to let their Land Rover age without a fight. Shop Discovery 3 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification. Please verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Dashboard AC Vent Socket Frame Trim Stickers — Land Rover Discovery 4 LR4 & Range Rover Sport (2010–2013) Precision-fit ABS trim stickers that refresh the AC vent socket frames across your Discovery 4 or Range Rover Sport dashboard — a clean, cost-effective interior upgrade with zero modification required. Discovery 4 LR4 Range Rover Sport L320 2010–2013 ABS Plastic Dashboard Trim AC Vent Frame No Modifications Clip-Fit Interior Upgrade Overview The Discovery 4 LR4 and second-generation Range Rover Sport (L320) both share an interior architecture that — while purposeful and robust — can begin to look worn around the AC vent socket frames over time. Fading, discolouration, and surface scuffs around these high-contact areas are among the first signs of a cabin that's seen real use. These trim stickers address exactly that, giving your dashboard a sharper, more intentional finish without the cost or complexity of full panel replacement. Manufactured from durable ABS plastic, each piece in this set is engineered to follow the exact contour of the OEM AC vent socket surrounds on 2010–2013 Discovery 4 and Range Rover Sport models. The fitment is precise — these aren't generic overlays. They're cut and formed to match the factory profile, which means the result looks like it belongs there, because dimensionally it does. For owners who take pride in maintaining a clean, well-presented interior, this is one of the most straightforward upgrades available. No drilling, no adhesive mess, no irreversible changes — just a refined finish that brings the dashboard back in line with how the rest of your vehicle presents itself. What's Included 🎛️ AC Vent Socket Frame Trim Set Full set of ABS dashboard vent surround stickers 📦 Protective Packaging Safely packed to prevent transit damage Product Highlights Precision-engineered to fit 2010–2013 Discovery 4 LR4 and Range Rover Sport (L320) AC vent socket frames Durable ABS plastic construction — resistant to heat, humidity, and everyday cabin wear Clip or adhesive-backed fitment — no drilling, cutting, or permanent modifications required Restores a clean, factory-fresh appearance to worn or discoloured vent surrounds Low-profile design sits flush with existing trim panels for a seamless OEM-style look Finished surface resists fingerprints and surface scuffs during daily use Colour and finish matched as shown in product imagery — consistent across the full set Lightweight construction adds no perceptible weight to the dashboard assembly Reversible upgrade — can be removed without damaging the underlying factory trim Pairs well with other Discovery 4 and Range Rover Sport interior trim upgrades Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 LR4 / L319 2010–2013 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery 3 L319 Early 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Ensure the dashboard surface and existing AC vent socket frames are clean and free from dust, grease, or residue. A microfibre cloth and a small amount of interior cleaner work well for this step. Dry fit each trim piece against its corresponding vent surround to confirm the alignment and profile match before committing to final installation. If the trim uses an adhesive backing, peel the protective liner carefully and position the piece accurately before pressing down — adhesive-backed trims are difficult to reposition once contact is made. Apply firm, even pressure across the full surface of each trim for 30–60 seconds to ensure a secure bond or clip engagement. Allow any adhesive-backed pieces to cure at room temperature for a minimum of 1 hour before exposing the vehicle to extremes of heat or cold. Step back and inspect the full set once installed — the result should sit flush with no visible gaps or lifting edges. Note: If you are unsure about any stage of the installation process, we recommend seeking assistance from a professional vehicle interior technician. Installation instructions are not included with this product. Always verify your specific vehicle variant against the compatibility table above before ordering. Explore the Full Discovery 4 Interior Range This trim set is just one part of a wider collection of precision-fit interior accessories for the Land Rover Discovery 4 LR4. Browse the full range at Victorious Automotive and build a cabin that reflects how seriously you take your vehicle. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always confirm compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 5 L462 · Exterior Trim ABS Front Bumper Grille Air Vent Cover – Land Rover Discovery 5 L462 (2017–2020) A precision-moulded ABS front bumper grille air vent cover designed to sharpen the front-end presence of your Discovery 5 with a clean, factory-integrated finish. Discovery 5 L462 2017–2020 ABS Plastic 3M Adhesive Fit No Drilling Required ISO 9001 Certified 0.5 kg Exterior Trim Overview The Land Rover Discovery 5 (L462) represents a significant evolution of the Discovery lineage — a vehicle that strikes the balance between urban practicality and genuine off-road capability. Its bold, upright front end is one of its defining visual features, and the bumper air vent detail is a key part of what gives the Discovery 5 its purposeful stance. Keeping that area looking sharp and well-finished matters to owners who take pride in how their vehicle presents. This front bumper grille air vent cover is moulded from high-quality ABS plastic and engineered specifically for the Discovery 5 L462 produced between 2017 and 2020. The piece has been designed to follow the exact contours of the OEM bumper architecture, delivering a seamless integration that looks factory-fitted. Whether you're looking to refresh a scuffed or faded original or simply elevate the front-end detail, this cover achieves both with minimal effort. Installation requires no drilling or specialist tools. The cover bonds directly to the bumper via pre-applied 3M automotive-grade adhesive tape — the same adhesive specification used in OEM trim applications. Manufactured in an ISO 9001-certified facility, quality control is built into every stage of production, ensuring consistent fitment and a finish that holds up over time. What's Included 🔲 Front Bumper Grille Air Vent Cover ABS plastic, vehicle-specific moulding for L462 Discovery 5 🔧 Pre-Applied 3M Adhesive Tape Automotive-grade, bonded to reverse of cover for direct application 📋 Installation Guidance Step-by-step fitting notes included with the product Product Highlights Precision-moulded ABS plastic for exact OEM-contour fitment Designed exclusively for Land Rover Discovery 5 L462 (2017–2020) Pre-applied 3M automotive adhesive — no drilling required Manufactured in an ISO 9001-certified production facility Colour-matched finish consistent with standard bumper trim Lightweight construction at 0.5 kg — no impact on vehicle dynamics Durable ABS resists UV exposure, road debris, and temperature cycling Clean, factory-integrated appearance once installed Reversible installation — no permanent modification to the vehicle Ideal for refreshing worn, scuffed, or faded OEM trim sections Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017 – 2020 Direct Fit Land Rover Discovery 5 L462 2021 onwards Verify Before Ordering Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 2004 – 2009 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Ensure the vehicle is clean and the front bumper surface is free from dust, grease, and moisture. Use an isopropyl alcohol wipe for best results. Dry-fit the cover against the bumper vent area to confirm alignment and orientation before committing to adhesion. Peel the protective backing from the pre-applied 3M adhesive tape on the reverse of the cover. Carefully align the cover to the bumper vent recess and press firmly into position, applying even pressure across the entire surface for 30–60 seconds. Run a finger around all edges to ensure full contact between the adhesive and the bumper surface. Allow the adhesive bond to cure fully before exposing to water, rain, or a car wash. ⚠ Important: Do not expose the fitted cover to water or moisture for a minimum of 72 hours following installation. This allows the 3M adhesive to achieve full bond strength. Installation is best performed at ambient temperatures above 10°C. Complete Your Discovery 5's Look Browse the full range of Land Rover Discovery 5 accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Use code 22GET20 to save 20% when you buy any two items. Shop Discovery 5 Accessories 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of describing product compatibility and remain the property of their respective owners. Please confirm fitment with your specific vehicle variant before ordering.

```html Victorious · BMW Interior · Trim & Styling ABS Gear Shift Panel Frame – LHD Gear Knob Cover Premium ABS trim piece restores factory aesthetics and adds oak wood grain detailing to your BMW interior with simple adhesive installation. F20 F30 F31 F34 X3 F25 X4 F26 2012–2018 ABS Plastic Oak Wood Grain LHD Self-Adhesive Overview This ABS Gear Shift Panel Frame is engineered for BMW 1, 2, 3, 4, 5, 7 Series and X3, X4 models (2012–2018, LHD configuration). The oak wood grain finish delivers a warm, premium aesthetic that elevates your cockpit without compromise or complexity. Unlike cheap plastic overlays that rattle or fade, this piece is manufactured in ISO9001-certified facilities and engineered from high-grade ABS. The pre-applied automotive-grade adhesive tape makes installation intuitive—no drilling, no permanent modifications. If you ever need to remove it, the backing simply peels away clean. Fits seamlessly into the gear shift surround, creating a cohesive interior refresh. Whether you're restoring originality or adding a subtle touch of warmth to a modern cockpit, this trim panel works. Tested and exported worldwide, trusted by BMW enthusiasts who demand quality. What's Included 📦 Gear Shift Panel Frame ABS construction, oak wood finish 🔧 Pre-Applied Adhesive Tape Double-sided automotive-grade backing 📋 Installation Guide Quick-reference steps included ✓ Brand New in Box Factory sealed, original packaging Product Highlights ISO9001 certified manufacturing – quality assurance at every step Premium ABS plastic – lightweight, durable, colour-stable Oak wood grain finish – warm, natural aesthetic that complements modern interiors Pre-applied automotive adhesive – no additional tools or adhesives required LHD-specific design – factory-fit alignment for left-hand drive models Non-invasive installation – peel and stick, fully removable Universal compatibility – works across 1, 2, 3, 4, 5, 7 Series and X3, X4 Tested for durability – exported globally, proven longevity in all climates Compact, lightweight – 200g with minimal dimensional footprint 30-day satisfaction guarantee – no-questions-asked returns on all Victorious products Compatibility Guide BMW Model Year Range Configuration Fit Status 1 Series (F20) 2012–2018 LHD ✓ Direct Fit 2 Series (F22) 2014–2018 LHD ✓ Direct Fit 3 Series (F30) 2012–2018 LHD ✓ Direct Fit 3 Series GT (F34) 2013–2018 LHD ✓ Direct Fit 4 Series (F32) 2013–2018 LHD ✓ Direct Fit 5 Series (F10) 2011–2017 LHD ✓ Direct Fit 5 Series GT (F07) 2011–2017 LHD ✓ Direct Fit 7 Series (F01) 2009–2014 LHD ✓ Direct Fit X3 (F25) 2011–2016 LHD ✓ Direct Fit X4 (F26) 2013–2016 LHD ✓ Direct Fit X5 (F15) 2013–2018 LHD ✓ Direct Fit X6 (F16) 2014–2019 LHD ✓ Direct Fit RHD Models All years Right-hand drive ✗ Not Compatible Installation Difficulty Level: Easy | Time Required: 10–15 minutes Clean the surface. Use a microfiber cloth and isopropyl alcohol to remove dust, oils, and residue from the gear shift panel area. Allow 2–3 minutes to dry completely. Position the frame. Carefully align the ABS panel with your gear shift surround. Check alignment from multiple angles before committing adhesive contact. Apply pressure. Once positioned, press firmly across the entire surface for 30–60 seconds to activate the automotive adhesive tape. Work from the centre outward to avoid air bubbles. Allow cure time. Leave the vehicle undisturbed for 24 hours before using the gear shift. This ensures maximum adhesive strength. Final inspection. Check all edges for secure contact. If any area lifts slightly, apply additional pressure or use a heat gun (low setting, 30 seconds) to reactivate the adhesive. Note: For best results, install in ambient temperatures between 10°C and 30°C. Avoid installation in direct sunlight or extreme cold, as this reduces adhesive effectiveness. Ready to Elevate Your BMW Interior? This ABS Gear Shift Panel Frame combines premium build quality with effortless installation. Order today and see why BMW owners worldwide trust Victorious Automotive for interior refinement. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ 4.9/5 stars · 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS ☎ +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket supplier and is not affiliated with BMW AG, Bayerische Motoren Werke, or any official BMW entity. All references to BMW vehicles are for compatibility identification only. BMW is a registered trademark of Bayerische Motoren Werke AG. ```

Victorious Automotive · Range Rover Sport L320 · Interior Trim ABS Interior Front Reading Light Cover Trim for Range Rover Sport L320 (2010–2013) A precision-moulded ABS plastic reading light surround trim that refreshes your L320's overhead console with a clean, factory-matched finish — no cutting, no drilling, no compromise. Range Rover Sport L320 2010–2013 ABS Plastic Interior Trim Reading Light Surround Direct Fit ISO 9001 Certified 200g Lightweight Overview The Range Rover Sport L320 — produced between 2005 and 2013 — earned its reputation as one of the most capable and driver-focused vehicles Land Rover has ever produced. The 2010–2013 facelift models in particular represent the pinnacle of the L320 generation, featuring revised interiors and enhanced cabin refinement. For owners who take pride in maintaining that interior quality, even the smallest detail matters. This front reading light cover trim is designed specifically for the L320 Sport's overhead console area, replacing or upgrading the factory reading light surround with a fresh, precisely moulded ABS plastic unit. Whether your original trim has faded, cracked, or simply begun to show its age, this direct-fit replacement restores the clean lines of the overhead console in minutes — no specialist tools, no adhesive mess, no bodywork knowledge required. Manufactured to ISO 9001 quality standards, the trim is produced from durable ABS plastic chosen for its dimensional stability, low weight, and resistance to UV degradation — all important properties in a cabin environment exposed to direct sunlight over time. The result is a replacement that feels at home in the L320's interior rather than an afterthought bolted onto it. What's Included 💡 Reading Light Cover Trim x1 — ABS plastic front reading light surround 📦 Protective Packaging Securely wrapped to prevent transit damage 🔧 Fitment Guide Basic installation reference included Product Highlights Precision-moulded ABS plastic construction for exact panel fitment Designed specifically for Range Rover Sport L320 2010–2013 models ISO 9001 certified manufacturing process for consistent quality Lightweight at just 200g — no strain on mounting clips or headliner UV-resistant ABS material reduces long-term fading and discolouration Direct clip-in fitment — no drilling or permanent modification required Restores factory-fresh appearance to the overhead console area Ideal replacement for cracked, faded, or damaged original surrounds Compatible with both left-hand and right-hand drive L320 configurations Pairs well with other interior refresh trims for a cohesive cabin upgrade Compatibility Vehicle Code Years Fitment Range Rover Sport L320 (Facelift) 2010–2013 Direct Fit Range Rover Sport L320 (Pre-facelift) 2005–2009 Verify Before Purchase Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Beginner  |  ⏱ Estimated Time: 10–20 Minutes  |  Tools Required: Trim removal tool (optional) Ensure the vehicle is parked with the ignition off. Allow the interior to cool if the cabin has been in direct sunlight — warm plastics are more pliable and easier to work with. Using a soft plastic trim removal tool or your fingertips, carefully release the existing reading light surround from its mounting position on the overhead console. Work around the perimeter gradually to avoid stressing any clips. Inspect the mounting clip points on the headliner for any damage. If any clips have broken on the original trim, these should be addressed before fitting the replacement. Align the new ABS reading light cover trim with the overhead console aperture, ensuring the surround sits flush against the headliner material on all sides. Apply firm, even pressure around the perimeter of the trim until all retaining clips engage audibly. Do not force — if resistance is felt, re-check alignment before proceeding. Inspect the finished installation from multiple angles to confirm the trim sits uniformly flush with no gaps or lifted edges. ⚠ Note: If you are unsure of fitment compatibility with your specific L320 build date or trim level, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Pre-facelift L320 models built before the 2010 refresh may differ in console configuration. Elevate Every Detail Your Range Rover Sport deserves an interior that looks as purposeful as the vehicle itself. Small details — a fresh trim surround, clean lines overhead — are what separate a well-maintained L320 from one that's simply been driven. Shop the full L320 interior collection at Victorious Automotive, trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Range Rover Sport L494 Collection → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced (including Range Rover, Range Rover Sport, L320, and related marks) are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle build date and specification before purchase or installation.

Victorious Automotive · Land Rover Discovery 4 · Exterior Trim ABS Matte Black Front Windshield A-Pillar Trim Cover for Land Rover Discovery 4 LR4 (2010–2016) A precision-moulded ABS trim cover that refreshes your Discovery 4's A-pillars with a clean, matte black finish — no drilling, no fuss, no compromise. Discovery 4 / LR4 2010–2016 ABS Plastic Matte Black Front A-Pillar Adhesive Fit Exterior Trim No Drilling Required Overview The Land Rover Discovery 4 — sold as the LR4 in North American markets — is one of the most capable and enduring SUVs ever built. Produced between 2010 and 2016, the Discovery 4 carried a commanding road presence backed by genuine off-road credibility. For owners who take pride in keeping their vehicle looking its best, maintaining the quality of every exterior detail matters just as much as mechanical upkeep. Over time, the factory A-pillar trims on the Discovery 4 are prone to fading, UV bleaching, and surface weathering. This ABS Matte Black A-Pillar Trim Cover is designed to sit cleanly over the existing front windshield pillar area, instantly restoring a sharp, purposeful appearance. The matte black finish is deliberately understated — it doesn't shout, it refines. It complements the Discovery 4's angular bodywork and pairs naturally with aftermarket black accents, grille surrounds, and door handle covers. Constructed from high-quality ABS (Acrylonitrile Butadiene Styrene) plastic, this trim is rigid enough to hold its form in all weather conditions yet lightweight enough to be secured with a strong double-sided adhesive backing. The result is a fitment that looks factory-considered and requires no specialist tools or professional installation. What's Included 🪟 A-Pillar Trim Cover Set Left and right covers for the front windshield pillars 🔲 Pre-Applied Adhesive Tape Double-sided 3M-grade backing for secure, residue-free bonding 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights High-grade ABS plastic construction — UV stable and weatherproof Matte black finish for a refined, anti-glare exterior aesthetic Custom-profiled to match the Discovery 4 LR4 A-pillar contour exactly Pre-applied double-sided adhesive for clean, tool-free installation Covers and protects faded or weathered OEM pillar trim Lightweight design adds no significant load to the vehicle Resistant to temperature fluctuations, UV exposure, and moisture Pairs naturally with black exterior accessory packages Requires no drilling, cutting, or bodywork modification Left and right pillar covers supplied as a complete set Compatibility Vehicle Model Code Years Fitment Land Rover Discovery 4 L319 / LR4 2010–2016 Direct Fit Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔧 Tools Required: None Thoroughly clean both A-pillar surfaces with an isopropyl alcohol wipe. Remove any wax, polish residue, or dirt that could prevent adhesion. Allow to dry completely before proceeding. Dry-fit both trim covers against the A-pillars without removing the adhesive backing. Confirm the profile sits flush and the edges align correctly with the windshield surround and door rubber seal. Starting with one side, peel back approximately one third of the adhesive liner. Position the top edge of the trim carefully, pressing it firmly into place before peeling the remainder of the liner. Apply firm, even pressure along the entire length of the trim for 30–60 seconds. Work from the centre outward to eliminate any air pockets behind the panel. Repeat the same process on the opposite A-pillar. Avoid washing the vehicle or exposing the trim to heavy rain for at least 24 hours to allow the adhesive to cure fully. ⚠ Important: Installation in temperatures below 10°C (50°F) may reduce adhesive effectiveness. For best results, fit in a warm, dry environment. If fitting during colder months, gently warm the adhesive with a heat gun or hairdryer on a low setting before application. Complete Your Discovery 4's Exterior Browse the full range of exterior accessories for the Land Rover Discovery 4 — from door handle covers and mirror caps to grille surrounds and side step trims. Every part is chosen to meet the standard your Discovery deserves. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Dashboard Trim — Range Rover Velar 2017–2020 Instantly elevate your Velar's cabin with a precision-cut matte silver dashboard control trim that delivers the SVR aesthetic without lifting a screwdriver. Range Rover Velar 2017–2020 Matte Silver ABS TPU Clip-On Fit SVR Look Interior Trim No Tools Required Overview The Range Rover Velar introduced one of the most refined and minimalist interiors ever seen in a production SUV — a clean, driver-focused cockpit defined by seamless surfaces and a near-buttonless dashboard. It's a space that rewards attention to detail, and even subtle upgrades are immediately noticeable to anyone who knows the car. This ABS matte silver dashboard control trim is engineered specifically for the 2017–2020 Range Rover Velar. Laser-cut to match the exact contours of the existing dashboard panel, it clips directly over the factory surface with no adhesive, no drilling, and no modification of any kind. The matte silver TPU finish introduces a premium, tactile contrast to the Velar's typically dark interior palette — closely mirroring the interior specification found on top-tier SVR and HSE Dynamic derivatives. Whether you're building out a full interior package or simply refreshing the cabin with a single accent piece, this trim is one of the most cost-effective ways to change the visual character of your Velar's centre dashboard zone. The clip-on design means it's reversible at any time — perfect if you're keeping the car near-standard for resale while still enjoying a more personalised drive every day. What's Included 🪄 Dashboard Trim Panel Matte silver ABS TPU, laser-cut to Velar spec 📎 Pre-Fitted Clips Factory-aligned retention clips, no extras needed 📄 Installation Guide Simple step-by-step fitting instructions included 🛡️ Protective Packaging Foam-padded to prevent transit scratches Product Highlights Precision laser-cut for an exact, flush fit on the Velar dashboard Clip-over installation — no tools, adhesive, or drilling required Premium matte silver TPU finish resists fingerprints and glare Fully reversible — restores to factory standard in minutes Replicates the SVR and HSE Dynamic interior specification Compatible with all trim levels across the 2017–2020 Velar range Part of a wider Velar interior package for a coordinated look Lightweight construction with no impact on dashboard function Durable ABS core maintains shape in high cabin temperatures Ships worldwide via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S / SE / R-Dynamic SE / HSE / HSE Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Verify Before Order Range Rover Velar SVAutobiography 2017–2020 SVAutobiography Dynamic Direct Fit Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 All Years All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 5–10 Minutes  |  🛠 Tools Required: None Ensure the existing dashboard surface is clean and free from dust or oils — a dry microfibre cloth works well. Remove the trim piece from its protective packaging and orient it correctly against the dashboard control zone to confirm alignment before fitting. Starting from one edge, align the integrated clips with the factory panel edges and apply gentle, even pressure along the trim length. Work along the full length of the piece, pressing each clip into place until you hear or feel a secure engagement at each point. Run your finger along the full perimeter to confirm a flush, gap-free fit against the dashboard surface. No adhesive or finishing required. Note: Avoid forcing the trim if resistance is felt — recheck alignment before applying further pressure. Do not use heat guns or adhesives, as these may damage the factory dashboard surface or void your vehicle warranty. Complete Your Velar Interior This dashboard trim is part of our full Range Rover Velar interior accessory collection. Pair it with matching silver accent pieces for a truly coordinated cabin transformation. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver ABS Door Speaker Decoration Trim — Range Rover Velar 2017–2020 Precision-cut matte silver TPU trim panels that clip directly over your Velar's existing door speaker surrounds — delivering an instant SVR-inspired interior upgrade with zero permanent modification. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Set of 4 Clip-On Fit SVR Look Interior Trim No Drilling Overview The Range Rover Velar is one of the most design-forward vehicles Land Rover has produced — every surface, every line considered. But the standard door speaker surrounds, while clean, leave room for the kind of elevated finish that owners of this calibre of vehicle rightly expect. These matte silver door speaker decoration trims are engineered precisely for that gap between standard and exceptional. Crafted from high-grade ABS with a premium TPU overlay in a refined matte silver finish, each piece is laser-cut to match the exact curvature and geometry of the Velar's door panel architecture. The result is a flush, factory-quality appearance that draws the eye without overwhelming the cabin's restrained design language. Think of it as the detail that makes the interior feel complete — the kind of finish you'd expect on the SVR specification. Installation requires no tools, no adhesives, and no modification to your vehicle. Each trim panel clips securely over the existing door speaker cover using a precision retention system, meaning they can be fitted or removed in minutes. As part of our wider Velar Interior Package series, these trims pair beautifully with our dashboard, centre console, and door handle accent pieces for a fully cohesive interior transformation. What's Included 🔲 Front Left Speaker Trim Driver-side door, precision laser-cut fit 🔲 Front Right Speaker Trim Passenger-side door, mirror-matched profile 🔲 Rear Left Speaker Trim Rear driver-side door panel fitment 🔲 Rear Right Speaker Trim Rear passenger-side door panel fitment 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Matte silver finish for a premium, understated aesthetic High-grade ABS construction with quality TPU surface layer Laser-cut for exact dimensional accuracy and panel alignment Clip-on installation — no tools, drilling, or adhesives required Full set of four pieces covers all door speaker positions Replicates the SVR interior specification look and feel Completely reversible — original trim remains undamaged UV-stable finish resists discolouration and interior sun exposure Fits seamlessly within the Velar's existing door panel geometry Part of a wider Velar interior trim collection for cohesive styling Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2021–2022 All Variants Verify Before Purchase Range Rover Evoque (L538) All Years All Variants Not Compatible Range Rover Evoque (L551) All Years All Variants Not Compatible Range Rover Sport (L494) All Years All Variants Not Compatible Range Rover Vogue (L405) All Years All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Clean each door speaker surround thoroughly using a microfibre cloth to remove any dust, oils, or residue that could prevent a secure fit. Remove each trim panel from its packaging and identify the correct piece for each door position — front left, front right, rear left, rear right. Hold the trim panel against the corresponding speaker surround and align the outer edges carefully with the existing door panel profile. Apply gentle, even pressure across the surface of the trim — starting from the centre and working outward — until all retention clips engage and the panel sits flush. Run your finger around the perimeter of each piece to confirm full seating and check for any gaps or misalignment before closing the doors. Repeat for all four door positions. No adhesive, heat gun, or additional fixings are required. Note: Ensure the door panel surface is completely dry before fitting. Do not force the clips if the panel feels misaligned — reposition and re-attempt to avoid stress marks on either the trim piece or the original door cover. Explore More Velar Accessories This trim is part of our curated Range Rover Velar interior and exterior collection. Browse the full range of accessories designed specifically for your vehicle at victorious.shop/collections/range-river-velar. Elevate Your Velar Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision accessories that respect the vehicle as much as you do. Worldwide shipping via DHL, FedEx, UPS, and TNT — and a 30-day money-back guarantee on every order. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Electronic Handbrake Switch Frame — ABS Interior Trim for Range Rover Velar 2017–2020 Elevate your Velar's centre console with a precision-cut matte silver handbrake switch surround that delivers the premium SVR aesthetic in minutes — no tools required. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Electronic Handbrake Frame Clip-On Fit No Drilling SVR Style Interior Trim Overview The Range Rover Velar introduced one of the most architecturally refined interiors Land Rover has ever produced — a clean, horizontal layout anchored by a dual-stack touchscreen and a beautifully minimal centre console. It's a cabin that rewards attention to detail, and that means even the smallest trim panels can make a meaningful difference to how the whole interior reads. This matte silver electronic handbrake switch frame is precision laser-cut to wrap seamlessly around the existing parking brake control area on Velar models produced between 2017 and 2020. Manufactured from high-quality ABS and TPU, the finish is a sophisticated brushed silver that closely mirrors the uprated trim found on top-specification and SVR-inspired Range Rover interiors. It clips directly over the factory surround without any adhesive, drilling, or modification to your vehicle's existing panels. Forming part of our broader Velar Interior Package range, this piece is designed to be combined with other silver trim upgrades across the console and door cards for a fully cohesive, factory-upgrade appearance. Whether you're making a single focused improvement or building out a complete interior refresh, this handbrake frame is an effortless starting point with an impact well above its price point. What's Included 🖼️ Handbrake Switch Frame Matte silver ABS/TPU surround, laser-cut to shape 📋 Fitting Instructions Simple clip-over guidance included Product Highlights Precision laser-cut for an exact, flush fit on the Velar centre console Matte silver finish matches SVR and top-specification Range Rover trim tones Clips directly over the existing handbrake surround — zero drilling required High-quality ABS and TPU construction for long-term durability and colour stability No adhesives needed — fully reversible upgrade with no damage to factory trim Designed as part of a wider Velar interior trim package for a cohesive look Covers the parking brake control area without interfering with switch operation Resistant to the daily wear of UV exposure, temperature change, and handling Achieves the premium SVR interior aesthetic without the cost of a full retrim Compatible with both standard and upgraded centre console configurations on the Velar Compatibility Vehicle Years Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic, First Edition Direct Fit Range Rover Velar (L560) 2021–2023 All Trims Verify Before Purchase Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Evoque L538 / L551 All Years All Trims Not Compatible Land Rover Discovery 5 All Years All Trims Not Compatible If your Velar was produced after 2020 or you are unsure of your build date, please contact our team on +44 203 943 9919 before ordering. Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure your vehicle is parked, the engine is off, and the electronic handbrake is engaged in its resting position. Clean the existing handbrake surround area with a dry microfibre cloth to remove any dust or residue that could interfere with the clip fit. Align the matte silver frame over the factory handbrake switch surround, checking that the cutouts line up precisely with the switch housing. Apply even, firm pressure around the perimeter of the frame until all retaining clips engage and the trim sits flush against the existing panel. Run your finger around all edges to confirm there are no lifted sections or gaps — the piece should feel solid and fully seated. Step back and inspect the fitment. For best results, pair with other Victorious silver interior trim pieces from our Velar collection. Note: Do not apply adhesive or heat. This trim is designed to be fully reversible. If resistance is felt during installation, check alignment before applying further pressure. Forcing a misaligned piece may cause minor scuffing to the factory surround. Complete Your Velar Interior This handbrake frame is one component of our full Range Rover Velar interior trim package. Browse the complete collection to match your console, door switches, air vent surrounds, and gear selector area in the same matte silver finish for a fully unified result. → Browse All Range Rover Velar Accessories Upgrade Your Velar Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Worldwide shipping via DHL, FedEx, and UPS — backed by our 30-day money-back guarantee. Shop Velar Interior Trim Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque · Interior Trim Matte Silver ABS Rear Row Cup Holder Cover Trim — Range Rover Evoque 2019–2020 A precision-fit interior trim piece that brings a refined matte silver accent to your Evoque's rear cup holder surround — installed in minutes, no tools required. Evoque L551 2019–2020 ABS Plastic Matte Silver Rear Interior Cup Holder Trim 3M Tape Install ISO 9001 Certified Overview The Range Rover Evoque has always punched above its weight in terms of interior refinement — it's a compact SUV that genuinely feels premium. For 2019 and 2020 model year Evoque owners, the rear cabin experience is just as important as the front, and the smallest details contribute to that sense of quality. The rear cup holder surround, while functional, can look understated compared to the rest of the cabin's character. This matte silver ABS cup holder cover trim from metyoucar is designed specifically to overlay the rear row cup holder bezel on the Range Rover Evoque (2019–2020), as well as the Range Rover Velar (2017–2019). Crafted from high-grade ABS plastic with a satin matte silver finish, it integrates seamlessly with the surrounding trim to create a cohesive, factory-adjacent aesthetic — without the factory price tag. The piece weighs just 29 grams and attaches cleanly via pre-applied 3M adhesive tape on the reverse face. There's no drilling, no permanent modification, and no specialist tools needed. It's the kind of subtle upgrade that you'll notice every time you get in, and that rear passengers will appreciate just as much as you do. What's Included 🪄 Rear Cup Holder Cover Trim ×1 — Matte silver ABS overlay piece, pre-fitted with 3M adhesive 🔲 3M Adhesive Backing Pre-applied to reverse face for clean, residue-free bonding 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-engineered fit for Evoque 2019–2020 rear cup holder surround Also compatible with Range Rover Velar 2017–2019 High-quality ABS plastic construction — durable and lightweight at just 29g Matte silver finish complements Evoque's interior colour palette 3M adhesive backing provides strong, long-lasting bond without drilling Tool-free installation — completed in under 5 minutes ISO 9001 certified manufacturing process for consistent quality No permanent modification to your vehicle's trim or panels Reversible — can be removed cleanly if required Ideal for refreshing worn or scratched original cup holder surrounds Compatibility Vehicle Model Code Year Range Fitment Range Rover Evoque L551 2019 – 2020 Direct Fit Range Rover Velar L560 2017 – 2019 Direct Fit Range Rover Evoque L538 (Mk1) 2011 – 2018 Not Compatible Range Rover Evoque L551 2021 onwards Verify Before Purchase Range Rover Sport L494 2013 – 2022 Not Compatible Land Rover Discovery Sport L550 2015 – 2022 Not Compatible If your model year falls outside the listed range or you're unsure of your vehicle's trim variant, please contact us before ordering — we're happy to confirm fitment. Installation Notes ⏱ Estimated Time: 5 minutes  |  🔧 Difficulty: Beginner  |  🛠 Tools Required: None Ensure the existing rear cup holder surround is clean, dry, and free from dust or grease. Use an alcohol wipe or IPA solution for best adhesion. Test-fit the trim piece over the cup holder surround without removing the 3M backing to confirm alignment and orientation. Once satisfied with positioning, peel the protective film from the 3M adhesive backing on the reverse of the trim piece. Carefully align the trim piece over the cup holder surround and press firmly into place, applying consistent pressure across the full surface for 30–60 seconds. Allow 24 hours for the adhesive to fully cure before subjecting the trim to heavy use or cleaning. ⚠ Note: Avoid fitting in cold temperatures below 10°C as this may reduce initial adhesive effectiveness. Do not use silicone-based cleaners on or near the trim as these can compromise the bond over time. Elevate Your Evoque's Rear Cabin Small details define the premium experience. Browse the full Range Rover Evoque interior accessories collection at Victorious Automotive and build a cabin that reflects how much you care about your vehicle. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Window Switch Surround Trims for Range Rover Velar 2017–2020 Bring factory-specification refinement to your Velar's door panels with a set of precision-cut matte silver window switch surrounds — installed in under two minutes, no tools required. Range Rover Velar 2017–2020 ABS Plastic Matte Silver 4-Piece Set No-Tool Fit Pre-Applied Adhesive Interior Trim Overview The Range Rover Velar set a new standard for interior design when it arrived in 2017 — clean surfaces, architectural lines, and a level of cabin sophistication that felt genuinely progressive. Yet even in standard specification, certain details that feature on higher-grade Velar variants are noticeably absent, and the window switch surrounds are one of those details. On S, SE, and HSE trim levels, the door cards can look comparatively plain without them. These matte silver window switch surround trims are precision-formed from high-quality ABS and finished in a brushed matte silver tone that closely matches the OEM aesthetic found on top-specification Velar models. Each piece is dimensionally matched to the Velar's door panel switch cluster, sitting flush and cleanly without any visible gaps or misalignment. The result is a cabin that looks more considered, more complete — exactly as it should. The upgrade is one of the most effective interior modifications available for the Velar. The switch surrounds are a focal point every time a door is opened, and the transition from bare plastic to a refined silver accent is immediately noticeable. Whether you're preparing your Velar for sale or simply want the interior to reflect what the car should have come with from the factory, this is a fast, affordable, and reversible way to achieve it. What's Included 🪟 Front Left Surround Driver-side door switch trim, pre-cut to fit 🪟 Front Right Surround Passenger-side door switch trim, pre-cut to fit 🪟 Rear Left Surround Rear driver-side door switch trim 🪟 Rear Right Surround Rear passenger-side door switch trim 🔧 Pre-Applied 3M Adhesive Factory-grade bonding tape on each piece 📋 Fitment Instructions Step-by-step guide included in packaging Product Highlights High-grade ABS construction — durable, lightweight, and warp-resistant Matte silver finish replicates OEM top-specification Velar appearance Full four-piece set covering all four door switch clusters Pre-applied 3M-grade adhesive backing on every piece Installs in under two minutes — no tools, no drilling, no damage Dimensionally precision-cut for a flush, gap-free fit on Velar door panels Fully reversible — can be removed cleanly without marking the door card Resistant to UV fading and interior temperature fluctuations Matches existing Velar interior silver accents for a cohesive, factory look Compatible with all Velar trim levels from 2017 to 2020 model years Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017 – 2020 S Direct Fit Range Rover Velar 2017 – 2020 SE Direct Fit Range Rover Velar 2017 – 2020 HSE Direct Fit Range Rover Velar 2017 – 2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017 – 2020 First Edition / SV Autobiography Verify First Range Rover Velar 2021 – 2023 All Variants (Facelift) Not Compatible Range Rover Sport L494 2013 – 2020 All Variants Not Compatible Range Rover Evoque L538 2011 – 2018 All Variants Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Difficulty: Beginner  ·  🛠 Tools Required: None Begin with clean, dry door panels. Use an isopropyl alcohol wipe to degrease the surface around each window switch cluster — this ensures the adhesive bonds correctly and maximises long-term hold. Unpack all four trims and orient each piece correctly before removing any adhesive backing. Take a moment to dry-fit each trim over its corresponding switch cluster to confirm alignment. Peel the protective backing from the 3M adhesive on the first trim piece. Carefully position it over the switch cluster, aligning the cutouts precisely with each button before pressing down. Apply firm, even pressure across the entire surface of the trim for approximately 30 seconds. Work from the centre outward to eliminate any air pockets beneath the adhesive layer. Repeat for all four door panels. Allow 30–60 minutes before using the window switches, giving the adhesive time to fully cure at room temperature. Note: Do not apply in temperatures below 10°C — the 3M adhesive requires adequate ambient warmth to bond effectively. If fitting in a cold garage, allow the vehicle interior to warm up naturally before installation. Do not stretch or force the trim pieces — they are precision-cut and should lay flat without pressure adjustment. Elevate Every Detail of Your Velar The interior details are what you live with every day. These window switch surrounds are a small change that makes a genuine difference — and they take less time to fit than it took to read this page. Shop All Velar Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of product compatibility identification. This product is an aftermarket accessory and is not a genuine JLR part.

Victorious · BMW · Interior Trim ABS Oak Wood Grain Gear Shift Head Trim – BMW LHD Premium oak wood grain finish elevates your dashboard with minimal installation fuss. LHD Compatible Oak Wood Grain 2020+ ABS Construction Adhesive Install Overview If you drive a left-hand drive BMW and want to add a touch of understated luxury to your interior, this oak wood grain gear shift trim delivers. It's engineered to integrate seamlessly with your dashboard's existing mouldings, creating a cohesive, refined cabin aesthetic without requiring bodywork or complex removal. Built from durable ABS composite with an authentic oak wood grain finish, this trim sits at the intersection of form and function. It's engineered to withstand temperature fluctuations, daily wear, and UV exposure while maintaining its rich, warm appearance for years to come. Installation is straightforward: clean the mounting surface, peel and stick using the supplied automotive adhesive tape, and you're done in minutes. No drilling, no fasteners, no risk to your vehicle's original components. What's Included 🎨 Gear Shift Head Trim Oak wood grain ABS – ready to install 🔌 Adhesive Tape Pre-applied automotive-grade mounting 📋 Installation Guide Simple step-by-step instructions included Product Highlights Authentic oak wood grain finish for premium visual impact Lightweight ABS composite – no vibration or rattling ISO9001 certified manufacturing quality Left-hand drive fitment – designed for LHD vehicles Adhesive installation – no drilling or tools required Temperature resistant – maintains finish in all climates Dimensions: 30cm L × 15cm W × 10cm H Weight: 200g – minimal impact on vehicle dynamics Matches OEM moulding lines and trim aesthetic 30-day money-back guarantee for peace of mind Compatibility BMW Model Year Range LHD RHD Status BMW X5 2020+ ✓ Direct Fit Not Compatible Compatible BMW 5 Series 2020+ ✓ Direct Fit Not Compatible Compatible BMW 3 Series 2020+ ✓ Direct Fit Not Compatible Compatible BMW 7 Series 2020+ ✓ Direct Fit Not Compatible Compatible Other BMW Models Pre-2020 Not Compatible Not Compatible Check fitment Note: Confirm your exact BMW model and year before purchase. This trim is designed for left-hand drive vehicles only. Right-hand drive fitment is not supported. Installation Difficulty Level: Easy | Time Required: 5–10 minutes Switch off the engine and allow the dashboard to reach room temperature. Use a microfibre cloth to clean the mounting surface thoroughly. Remove all dust, oils, and debris. Dry the surface completely with a lint-free cloth. Carefully peel back the adhesive tape backing and position the trim on your gear shift head. Press firmly and evenly across the entire surface for 30 seconds to ensure full contact. Allow 24 hours before using the gear shift to let the adhesive cure fully. ⚠️ Important: Do not apply this trim in temperatures below 10°C or above 40°C. Ensure the dashboard surface is completely dry before application. Moisture will compromise adhesion and longevity. Ready to Elevate Your Interior? Add understated luxury to your BMW cabin with this premium oak wood grain gear shift trim. Quality craftsmanship meets effortless installation—no tools, no fuss, just results. Shop Now Use code 22GET20 for 20% off when you buy 2 items. 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or associated with BMW, Bayerische Motoren Werke AG, or any of its subsidiaries. All product names, logos, and brands mentioned are the property of their respective owners. This product is designed for aftermarket enhancement and customisation only.

Victorious Automotive · Land Rover Discovery 3 · Interior Accessories ABS Central Console Multifunction Storage Box & Phone Holder Tray — Land Rover Discovery 3 LR3 (2004–2009) A precision-engineered console organiser built specifically for the LR3 — restoring order to your cabin without a single tool or modification. Discovery 3 · LR3 2004–2009 ABS Plastic Phone Holder Storage Tray Tool-Free Fit Model: LLK2795 Black Overview The Land Rover Discovery 3 LR3 was engineered for serious capability — a vehicle that earned its reputation on everything from school runs to remote overland routes. But like many Discoveries of its era, the central console was designed with function over finesse, leaving drivers managing loose phones, keys, cards, and cables across an unstructured space that rarely stayed tidy for long. This multifunction storage box and phone holder tray addresses exactly that. Custom-moulded to the exact dimensions of the Discovery 3 LR3 central console, it slots cleanly into place and immediately transforms the most-used area of the cabin into something organised, accessible, and visually cohesive. Whether you're navigating city traffic with your phone mounted in reach, or heading off-road with your essentials secure, this tray does the job quietly and correctly. Constructed from high-grade ABS plastic in a clean matte black finish, it's built to endure daily use without warping, cracking, or fading. The integrated phone holder keeps your device stable on the move while dedicated compartments handle smaller items that typically end up scattered. It's the kind of upgrade that once fitted, you'll wonder how you managed without it. What's Included 🗂️ Central Console Storage Tray Full multifunction organiser unit with integrated compartments 📱 Integrated Phone Holder Built into the tray — no separate bracket required Secures device during driving Product Highlights Custom-fit design for the Discovery 3 LR3 (2004–2009) — no cutting, trimming, or modification required High-grade ABS plastic construction offers excellent rigidity and long-term durability Integrated phone holder keeps your device secure and within arm's reach while driving Matte black finish blends naturally with the LR3's original interior trim and console surfaces Multiple compartment zones for cards, coins, keys, and other everyday essentials Tool-free installation — simply place and clip into the existing console space Lightweight at 300g — adds no meaningful weight or bulk to the vehicle Raised edges and defined bays prevent items from shifting during off-road driving or cornering Easy to remove and clean — resistant to dust, grime, and everyday spills Compact footprint (30cm × 15cm × 10cm) engineered to maximise console space without crowding Compatibility Vehicle Model Code Years Fit Land Rover Discovery 3 LR3 2004–2009 Direct Fit Land Rover Discovery 4 LR4 2009–2016 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Land Rover Defender L663 2020–Present Not Compatible Installation Notes 📋 Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Remove any existing items from your Discovery 3 LR3 central console area and clear the mounting surface. Dry-fit the storage tray into the console recess to confirm correct alignment and orientation before fully seating it. Press the tray firmly and evenly into position — locating tabs and moulded edges should align flush with the existing console trim. Test stability by applying light lateral pressure. The unit should sit firm with no rocking or movement. Place your phone into the integrated holder and confirm the fit before driving. Adjust device position as needed for your specific handset size. ⚠ Compatibility Note: This tray is engineered exclusively for the Land Rover Discovery 3 LR3 (2004–2009). Console dimensions changed with the Discovery 4 refresh in 2009. Please verify your exact model year before ordering. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment for you. More for Your Discovery 3 Browse our full range of Land Rover Discovery 3 interior and exterior accessories — all selected and tested by enthusiasts who understand what this vehicle demands. Shop Discovery 3 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Evoque L551 · Exterior Trim ABS Plastic Door Side Body Molding Cover Trim for Range Rover Evoque L551 (2019–2020) A precision-fit body side molding upgrade that sharpens the Evoque L551's exterior lines while shielding your doors from everyday scuffs and kerb strikes. Evoque L551 2019–2020 ABS Plastic Piano Black Silver Carbon Fibre Rose Gold Exterior Trim Tool-Free Fit 3M Adhesive Overview The second-generation Range Rover Evoque L551 arrived in 2019 as one of the most refined and design-forward compact SUVs in Land Rover's history. Its sculpted body, flush surfaces, and distinctive silhouette reward owners who pay attention to the details — which is exactly where these door side body molding cover trims come in. Engineered specifically for the 2019–2020 Evoque L551, these molding trims wrap the lower door edges in high-grade ABS plastic, delivering a factory-integrated appearance that protects the most vulnerable painted surfaces on your vehicle. Whether it's car park door dings, road debris, or general wear, these trims act as a first line of defence while simultaneously elevating the exterior aesthetic with clean, purposeful lines. Available in four distinct finishes — Piano Black, Silver, Carbon Fibre, and Rose Gold — there's an option to complement every Evoque specification, from the understated SE to the more expressive R-Dynamic variants. Each trim is produced under strict quality control to ensure consistent panel alignment, finish quality, and adhesive performance straight out of the box. What's Included 🚪 Full Door Trim Set Complete set covering all door panels for the L551 body 🔲 Pre-Applied 3M Adhesive Industrial-grade tape bonded to each trim piece at factory 📋 Installation Guide Step-by-step reference for clean, accurate fitment ✅ QC-Passed Components Each piece inspected before dispatch for finish and fit Product Highlights Precision-engineered exclusively for the Range Rover Evoque L551 2019–2020 body High-grade ABS plastic construction for lasting durability in all climates Four finish options: Piano Black, Silver, Carbon Fibre, Rose Gold Pre-applied industrial 3M adhesive backing for secure, tool-free installation Protects lower door panels from scuffs, kerb strikes, and road debris Slim, low-profile design that complements the Evoque's factory body lines UV-resistant surface coating to prevent fading and discolouration over time Strict factory quality control — each unit inspected before shipping 100% brand new — never refurbished or repackaged No drilling, cutting, or specialist tools required for installation Compatibility Model Code Year Range Fitment Range Rover Evoque (2nd Gen) L551 2019–2020 Direct Fit Range Rover Evoque (1st Gen) L538 2011–2018 Not Compatible Range Rover Evoque (2nd Gen Facelift) L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔧 Tools Required: None Thoroughly clean the installation area on each door panel using an isopropyl alcohol wipe, removing all wax, grease, and dust. Allow to dry completely before proceeding. Warm the pre-applied 3M adhesive strip on the reverse of each trim piece using a heat gun or hairdryer on a low setting for 15–20 seconds. This activates the adhesive for maximum bond strength, particularly important in cooler temperatures. Dry-fit each trim piece against the door panel without removing the adhesive backing. Confirm the alignment and profile match before committing to placement. Peel back the adhesive liner carefully and position the trim piece against the door, starting at one end and working progressively to avoid air pockets or misalignment. Apply firm, even pressure along the full length of each trim for at least 30 seconds to ensure full adhesive contact with the door surface. Allow a minimum of 24 hours before exposing the vehicle to water or washing. This curing period ensures a permanent, weather-resistant bond. ⚠ Important: Do not apply in direct sunlight or when panel surface temperature exceeds 40°C, as this can affect adhesive positioning. If you are uncertain about the installation process, professional fitting is recommended to ensure optimal results and preserve your vehicle's finish. Upgrade Your Evoque. The Right Way. At Victorious Automotive, every product we carry is selected with one standard in mind — worthy of a Range Rover. Explore our full collection of Evoque L551 exterior accessories and find everything your vehicle deserves. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, authorised by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used solely for the purpose of product compatibility identification and remain the intellectual property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim ABS Rear AC Vent Cover Trim for Land Rover Discovery 5 L462 (2017–2020) A precision-fit rear air conditioning vent trim that instantly sharpens the cabin aesthetic of your Discovery 5 — available in four premium finishes. Discovery 5 L462 2017–2020 ABS Plastic Rear AC Vent 4 Finishes No-Drill Install Interior Trim 2 Piece Set Overview The Land Rover Discovery 5 L462 is a vehicle that balances genuine off-road capability with a cabin experience built for seven occupants in comfort. For owners who take that interior seriously, the rear row is every bit as important as the driver's cockpit — and the stock rear AC vent surround is one of those overlooked details that, once addressed, makes a noticeable difference to how the space reads overall. This rear air conditioning vent cover trim is designed specifically for the Discovery 5 L462 built between 2017 and 2020. Formed from high-quality ABS plastic, each piece is shaped to sit flush over the factory vent housing with zero modification required. The result is a cleaner, more intentional finish — particularly effective in the Oak Wood Grain and Carbon Fibre variants, which complement both the lighter and darker interior colour themes found across the Discovery 5 range. Installation is handled via pre-applied double-sided adhesive, making this a straightforward weekend upgrade with lasting results. Whether you're refreshing a well-used cabin or simply refining an already-immaculate interior, these trim covers deliver a factory-plus feel that sits entirely in keeping with the Discovery 5's premium positioning. What's Included 🪟 Rear AC Vent Cover Trim × 2 Left and right rear row vent surrounds, matched pair 🔧 Double-Sided Adhesive Pre-applied for clean, tool-free fitment 📦 Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Precision-moulded ABS plastic for a flush, factory-fit appearance Available in Oak Wood Grain, Carbon Fibre, Silver, and Black finishes Covers and protects the original vent housing from scuffs and discolouration Pre-applied 3M-grade double-sided adhesive for secure, residue-free bonding Designed exclusively for the Discovery 5 L462 — no trimming or cutting needed Lightweight construction adds no discernible weight to the interior panels Smooth, gloss-finished surface wipes clean effortlessly Sold as a complete matched pair — left and right vent surrounds included Compatible with all trim levels of the 2017–2020 Discovery 5 100% brand new — no remanufactured or reconditioned components Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Land Rover Discovery 5 L462 2021–2024 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with a clean, dry cabin. Ensure the rear AC vent housing surfaces are free of dust, grease, or moisture — a quick wipe with an isopropyl alcohol cloth is ideal. Dry-fit each trim piece over the corresponding vent surround to confirm alignment before committing. The left and right pieces are shaped differently — test both positions first. Peel the backing from the pre-applied double-sided adhesive on the reverse of each trim cover. Starting from one edge, press the trim firmly into position over the vent housing, working across the surface to eliminate any air gaps. Apply firm, even pressure for 30–60 seconds across the full face of each piece to ensure full adhesive contact. Allow 30 minutes before exposing the trim to direct airflow or sunlight to allow the bond to fully cure. Note: Avoid installation in temperatures below 10°C, as cold conditions can reduce initial adhesive performance. If fitting in a garage, allow the vehicle and trim pieces to reach room temperature before starting. Elevate Your Discovery 5 Interior Explore the full range of Land Rover Discovery 5 interior accessories at Victorious — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Mercedes-Benz · Interior Trim ABS Rear Air Conditioning Vent Cover Trim for Mercedes-Benz E-Class W213 Premium matte silver interior trim that elevates cabin aesthetics while protecting your climate control vents with precision engineering. W213 2016–2018 ABS Plastic Matte Silver Direct Fit Interior Moulding Overview The Mercedes-Benz E-Class W213 (2016–2018) is engineered for refined elegance, and every interior detail matters. Your cabin deserves accessories that match that standard—components that blend seamlessly while enhancing both form and function. This Rear Air Conditioning Vent Cover Trim is precision-engineered specifically for the W213 platform. Crafted from high-quality ABS plastic, it features a sophisticated matte silver finish that complements the modern aesthetic of your Mercedes interior. Beyond beauty, it shields your climate control outlets from dust, debris, and wear, maintaining system cleanliness and longevity. Installation is straightforward for most owners, requiring no special tools or modifications. Whether you're refreshing your cabin or replacing a worn component, this trim delivers professional-grade results in minutes. What's Included 🎯 1 × Rear AC Vent Cover Trim Matte silver ABS, LLK326 model Product Highlights Custom-fit design engineered for W213 E-Class precision High-grade ABS plastic with superior durability Elegant matte silver finish resists fingerprints ISO9001 quality assurance standard Protects climate control outlets from dust and debris Lightweight at 500g—minimal impact on cabin Simple plug-and-play installation (no modifications required) Complements OEM Mercedes interior design language Chemical and UV resistant for long-term appearance Enhanced cabin refinement and visual cohesion Compatibility Model / Year Range Status Mercedes-Benz E-Class W213 (2016–2018) Direct Fit Mercedes-Benz E-Class W213 (2019–2024) Not Compatible Mercedes-Benz E-Class W212 (2009–2015) Not Compatible Other Mercedes-Benz models Not Compatible Note: Verify your exact W213 model year and chassis code before purchase. Later W213 facelift models (2019+) may require a different component. Contact our team for clarity. Installation Guide Difficulty: Easy | Time: 5–10 Minutes Ensure the engine and climate control system are off, and cabin temperature is comfortable. Locate the rear air conditioning outlet assembly in your cabin (typically located on the rear seat divider or side panels). Gently remove the existing vent cover by carefully unclipping or unscrewing the fasteners (usually 2–3 small clips or screws). Align the new LLK326 trim with the outlet opening, ensuring proper orientation. Secure the trim using the original fasteners, applying gentle, even pressure until fully seated. Test the climate control system to confirm airflow is unobstructed and the cover sits flush. Important: Do not force the trim into place—if resistance is felt, stop and verify correct alignment. Over-tightening fasteners may crack the ABS plastic. If you are unsure about any step, consult the included installation instructions or contact our support team at +44 203 943 9919 (Mon–Fri, 9am–7pm). Ready to Upgrade Your E-Class Interior? Precision fit, premium materials, ISO9001 assured. This rear AC vent trim adds the finishing touch your Mercedes deserves—subtle, elegant, built to last. Add to Cart Use code 22GET20 for 20% off any 2 items. 4.9/5 from 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or authorised by Mercedes-Benz, Daimler AG, or Jaguar Land Rover. All brand names and trademarks are the property of their respective owners. Product compatibility is provided in good faith; always verify fitment with your vehicle's specific VIN and chassis code before purchase.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Rearview Mirror Cover Trim Stickers for Land Rover Range Rover Sport, Evoque, Discovery 4 & LR4 (2010–2018) A precision-cut interior mirror trim panel that adds a refined, colour-matched finish to one of the most visible touchpoints inside your Land Rover — with no tools required. Discovery 4 L319 Range Rover Sport L320 Evoque L538 2010–2018 ABS Plastic 3 Finish Options No-Tool Fit Interior Trim Direct Adhesive Overview The Discovery 4, Range Rover Sport L320, and first-generation Evoque are three of Land Rover's most enduring platforms — vehicles built for both serious capability and a composed, upmarket cabin. Yet the factory rearview mirror surround is one of those small details that often goes overlooked, leaving a plain plastic panel in one of the most prominent sightlines of your interior. This ABS rearview mirror cover trim is designed to sit cleanly over the existing mirror surround, transforming the look of your upper cabin in minutes. Available in Silver, Black Wood Grain, and Carbon Fiber finishes, it allows you to either complement your existing trim or make a deliberate contrast statement — particularly popular amongst owners who have upgraded other cabin elements and want visual consistency throughout. Manufactured from high-quality ABS plastic, the panel is both lightweight and robust, resistant to the temperature cycles and UV exposure that degrade cheaper alternatives over time. The pre-applied double-sided adhesive backing ensures a flush, rattle-free installation with no drilling, cutting, or modification to your vehicle's factory components. What's Included 🪞 Rearview Mirror Cover Trim 1 x ABS panel in your chosen finish 🔲 Pre-Applied Adhesive Tape Double-sided, factory-positioned on reverse 📄 Installation Guide Simple fitting reference included Product Highlights Premium ABS plastic construction — durable, UV-stable and warp-resistant Three finish options: Silver, Black Wood Grain, and Carbon Fiber Pre-applied double-sided adhesive for clean, no-drill installation Precision-cut to mirror the factory surround profile exactly Flush fit with no visible edges or lifting — looks factory from day one Lightweight panel adds no perceptible weight or bulk to the mirror assembly Rattle-free once fitted — adhesive holds firm across temperature ranges Compatible across four distinct Land Rover and Range Rover platforms Reversible — removes cleanly without damaging the factory panel beneath 100% brand new — not refurbished, not a reproduction of a used component Compatibility Model Code Years Fit Range Rover Sport L320 2014–2017 Direct Fit Range Rover Evoque L538 2012–2018 Direct Fit Discovery Sport L550 2015–2019 Direct Fit Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L494 2013–2022 Verify Required Range Rover Vogue L405 2013–2021 Verify Required Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Time: 10–15 Minutes  |  🛠 Tools Required: None Clean the existing rearview mirror surround thoroughly with an isopropyl alcohol wipe and allow to dry completely — this is the most important step for adhesion longevity. Dry-fit the trim panel over the mirror surround without removing the adhesive backing. Confirm alignment, edge positioning, and panel orientation before committing. Peel back a small section of the adhesive backing. Align the panel carefully from one edge, pressing down progressively across the surface to avoid air pockets. Once positioned, apply firm, even pressure across the entire panel for 30–60 seconds to activate the adhesive bond fully. Allow 24 hours before exposing the trim to extreme temperature variation or moisture. Avoid touching or flexing the panel during this curing period. ⚠ Note: Ensure the mirror surround surface is completely dry and free of any silicone-based products, wax, or dashboard dressings before applying. These compounds significantly reduce adhesive performance and may cause the trim to lift over time. Browse Your Full Vehicle Collection Looking for more interior upgrades for your Land Rover? Explore the full range of accessories curated specifically for your model: 🚙 Discovery 4 / LR4 L319 · 2010–2016 🚙 Range Rover Sport L320 · 2005–2013 🚙 Range Rover Evoque L538 · 2012–2018 🚙 Discovery Sport L550 · 2015–2019 Elevate Every Detail Inside Your Land Rover Small changes in the right places define a truly refined cabin. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium interior upgrades — backed by our 30-day money-back guarantee and worldwide DHL, FedEx, and UPS shipping. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Centre Console Cup Holder Frame Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-cut silver ABS trim ring that brings a clean, refined finish to the Discovery Sport's centre console cup holder area — no tools, no mess, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Direct Fit No-Tool Install Interior Trim Centre Console Overview The Land Rover Discovery Sport L550 delivered genuine family-SUV versatility with a cabin that punched above its segment — but over time, the centre console trim can begin to show its age. The cup holder surround, subject to daily contact and constant wear, is often one of the first areas to look tired. This ABS silver frame cover trim is designed to address exactly that, slipping over the existing cup holder recess to instantly refresh the look of the console. Manufactured from high-grade ABS thermoplastic and finished in a brushed silver tone, the trim is engineered to sit flush against the factory contours of the 2015–2019 Discovery Sport centre console. The result is a seamless, factory-like appearance that elevates the interior without any permanent modification. The silver finish works particularly well alongside the Discovery Sport's original chrome and piano black interior accents, creating a coherent, upscale aesthetic. Installation requires no specialist tools and no prior experience. The trim ships with a pre-applied adhesive backing that bonds firmly to the existing console surface — simply clean, peel, and press into place. It's the kind of detail-driven upgrade that Discovery Sport owners who care about their interior will immediately notice and appreciate. What's Included 🪟 Cup Holder Frame Cover Trim 1 × silver ABS centre console trim ring 🔧 Adhesive Backing Pre-applied double-sided tape for secure fitment 📋 Fitment Guidance Basic installation instructions included Product Highlights Precision-moulded ABS construction for long-term durability and shape retention Silver finish complements factory chrome and piano black interior elements Pre-applied double-sided adhesive for a secure, rattle-free bond Custom-profile design ensures flush, gap-free fitment to the console No drilling, cutting, or specialist tools required for installation Resistant to everyday wear, UV exposure, and temperature variation 100% brand new — not a used or refurbished component Lightweight construction adds no perceptible weight to the console area Reversible upgrade — can be removed without damage to factory trim Immediately refreshes the appearance of a high-contact interior zone Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020 – 2024 Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature — cold conditions can reduce adhesive performance. Allow the car to warm naturally if stored in a cold environment. Thoroughly clean the cup holder surround area using an isopropyl alcohol wipe or similar solvent-based cleaner. Remove all dust, oils, and residue from the surface. Allow to dry completely before proceeding. Test-fit the trim ring over the cup holder recess without removing the adhesive backing. Confirm the profile sits flush with no lifting or gaps around the perimeter. Peel the protective backing from the double-sided adhesive tape. Carefully align the trim ring over the cup holder and press firmly from the centre outward, applying even pressure for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before exposing the trim to heat, liquids, or heavy contact for best long-term adhesion. ⚠ Note: Ensure the contact surface is completely clean and dry before applying the adhesive. Residual moisture, grease, or cleaning product will significantly reduce bonding strength. If in doubt, re-clean with isopropyl alcohol and allow an additional 10 minutes of drying time. Upgrade Your Discovery Sport Interior Every detail inside your Discovery Sport reflects the standard you hold your vehicle to. Browse the full range of Discovery Sport interior accessories and find the finishing touches your cabin deserves. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Product imagery is representative — minor variations in finish may occur between production batches.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Silver Central Control Armrest Box Panel Cover Trim – Land Rover Discovery 4 LR4 (2010–2016) A precision-fit interior trim upgrade engineered specifically for the Discovery 4, refreshing the central armrest area with a clean, modern silver finish and zero-fuss adhesive installation. Discovery 4 LR4 2010–2016 ABS Plastic Silver Finish Armrest Panel Direct Fit Adhesive Install Interior Trim Overview The Land Rover Discovery 4 — known globally as the LR4 — remains one of the most capable and respected large SUVs ever produced. Built between 2010 and 2016, it combined genuine off-road prowess with a premium interior that aged remarkably well. For owners who continue to run and refine their Discovery 4, maintaining the quality of that interior is a point of pride — and the central armrest console is one of the most-used, most-visible surfaces in the cabin. This Silver ABS Central Control Armrest Box Panel Cover Trim is designed from the ground up for the Discovery 4. It overlays the existing armrest box panel with a crisp, silver-toned finish, instantly modernising the centre console area and bringing a more cohesive, contemporary feel to the interior. Whether your original trim has faded, cracked, or you simply want a refreshed look, this piece delivers a clean result without the cost or complexity of full interior refurbishment. Manufactured from high-quality ABS plastic — the same material class used across OEM interior components — this cover offers excellent rigidity, resistance to daily wear, and a finish that holds up to UV exposure and temperature variation. The pre-applied adhesive backing ensures a secure, flush bond to the original panel surface with no drilling, cutting, or specialist tools required. What's Included 🧩 Armrest Box Panel Cover 1x Silver ABS trim piece, pre-cut to Discovery 4 spec 🔧 Pre-Applied Adhesive 3M-grade backing tape pre-fitted to reverse face 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-moulded to match the exact contours of the Discovery 4 central armrest panel High-quality ABS plastic construction — rigid, durable, and resistant to warping Silver finish adds a modern, premium tone to the centre console area Pre-applied adhesive backing for clean, tool-free installation in minutes 100% brand new — not reconditioned or refurbished Covers surface imperfections, scratches, and fading on the existing panel Resistant to UV exposure, heat variation, and everyday interior wear No drilling, cutting, or modification to original trim required Compatible with all Discovery 4 variants produced between 2010 and 2016 Lightweight fitment — does not affect armrest function or movement Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–20 Minutes  ·  🔩 Tools Required: None Start with a clean, dry interior. Ensure the Discovery 4 has been parked and the cabin is at or near room temperature before beginning. Thoroughly clean the existing armrest box panel surface using an interior cleaner or isopropyl alcohol wipe. Remove any dust, grease, or residue and allow it to dry completely. Offer up the trim piece dry first — without removing the adhesive backing — to confirm alignment and fit against the existing panel surface. Once satisfied with the positioning, carefully peel back the adhesive liner from the reverse of the trim piece, exposing the bonding surface. Align the trim piece precisely with the panel, then press firmly and evenly across the full surface for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure for a minimum of 1–2 hours before subjecting the trim to heavy use or temperature extremes. ⚠ Note: Do not attempt installation on a cold or damp surface — adhesive performance may be significantly reduced below 10°C. Ensure the panel is completely dry before applying. Once bonded, repositioning may compromise the adhesive bond. Upgrade Your Discovery 4 Interior Small changes make a big difference inside a vehicle you use every day. Browse our full range of Discovery 4 interior accessories — from trim covers to console upgrades — and keep your LR4 looking its best. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory parts. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Silver Sequin Frame Sticker — Front Row Cup Holder, Center Console · Land Rover Discovery 4 LR4 (2010–2016) A precision-cut sequin-finish trim sticker that refreshes the front cup holder surround of your Discovery 4 centre console — no tools, no modification, just a noticeably sharper interior. Discovery 4 / LR4 2010–2016 ABS Plastic Silver Sequin Finish Centre Console Cup Holder Frame No-Drill Install Interior Trim Overview The Land Rover Discovery 4 — known as the LR4 in North America — is one of the most accomplished and characterful off-roaders ever built. Produced between 2010 and 2016, it earned a devoted following for its combination of genuine off-road capability and composed on-road manners. For owners who use theirs daily, the centre console is one of the most-touched areas of the cabin, and the original cup holder surround can begin to look tired after years of use. This trim sticker is the cleanest way to address that without lifting a single panel. Manufactured from high-grade ABS plastic with a striking silver sequin finish, this cup holder frame sticker is precision-cut to match the front row cup holder aperture of the Discovery 4's centre console. The sequin texture catches light in a way that feels considered and purposeful — not gaudy — complementing the Discovery 4's interior design language without overwhelming it. It sits flush against the console surface, giving the impression of an OEM-quality refresh at a fraction of the cost. Installation requires no drilling, no wiring, and no professional fitting. The sticker ships with pre-applied double-sided adhesive backing, meaning the process from unboxing to finished result takes under ten minutes. Whether you're refreshing a high-mileage workhorse or adding a finishing touch to a meticulously maintained example, this is one of the simplest interior upgrades available for the Discovery 4. What's Included 🪟 Cup Holder Frame Sticker × 1 ABS silver sequin finish, pre-cut for Discovery 4 LR4 front row centre console 🔲 Pre-Applied Adhesive Backing Strong double-sided tape pre-fitted to the reverse — ready to install out of the box Product Highlights Precision-cut ABS plastic trim matched to Discovery 4 LR4 cup holder dimensions Silver sequin finish adds subtle, light-catching texture to the centre console Strong double-sided adhesive backing ensures a secure, long-lasting bond No drilling, no modification — completely reversible installation Resistant to everyday wear, UV exposure, and temperature fluctuations inside the cabin Refreshes a high-traffic area of the interior without a full console replacement Sits flush for a factory-fitted appearance once applied Lightweight ABS construction — adds no meaningful weight to the vehicle 100% brand new — supplied in protective packaging to prevent transit damage Suitable for both left-hand and right-hand drive Discovery 4 variants Compatibility Vehicle Model Code Year Range Trim Position Fitment Land Rover Discovery 4 LR4 / L319 2010–2016 Front Row Cup Holder, Centre Console Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 — Not Confirmed Land Rover Discovery 5 L462 2017–present — Not Compatible Range Rover Sport L494 L494 2013–2020 — Not Compatible Range Rover Vogue L405 L405 2013–2020 — Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Begin with the centre console surface clean and completely dry. Use an isopropyl alcohol wipe on the cup holder surround area to remove any residue, dust, or finger oils — this is the single most important step for adhesion quality. Allow the cleaned surface to dry fully. Do not proceed while any moisture remains. Remove the frame sticker from its packaging and hold it against the cup holder aperture without removing the adhesive backing. Confirm alignment and fitment before committing. Carefully peel away the adhesive backing film, taking care not to touch the adhesive surface with your fingers. Align the sticker precisely over the cup holder surround and press down firmly from the centre outward. Apply sustained pressure for 30–60 seconds across the entire surface. Allow the adhesive to cure for at least one hour before placing items in or near the cup holders. ⚠ Note: Install in a warm environment where possible — adhesive performance is reduced in temperatures below 10°C. Avoid installing immediately after the vehicle has been parked in direct sunlight as an overheated surface can also affect bonding. If you have any doubts about fitment for your specific build date or specification, contact our team before installing. More for Your Discovery 4 Browse our full range of interior and exterior accessories specifically curated for the Land Rover Discovery 4 LR4 — from trim upgrades to protective accessories built for owners who expect more from their vehicles. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Front Seat Belt Cover Trim Sticker for Land Rover Discovery Sport 2015–2021 A precision-crafted silver ABS trim piece that wraps your Discovery Sport's front seat belt surrounds in a clean, polished finish — lifting the cabin aesthetic with zero permanent modification. Discovery Sport L550 2015–2021 ABS Plastic Silver Finish Seat Belt Trim No Drilling Required Direct Fit Interior Upgrade Overview The Land Rover Discovery Sport L550 (2015–2021) is one of the most capable and well-appointed compact SUVs Land Rover has ever produced. Its interior strikes a balance between practicality and refinement — but the seat belt pillar surrounds, finished in standard black plastic, can feel at odds with owners who have invested in upgrading the rest of their cabin. It's a small detail, but in a well-maintained interior, small details are exactly what define the overall impression. These ABS Silver Front Seat Belt Cover Trim Stickers are designed to address that gap. Contoured to sit flush against the seat belt anchor pillars on both front seats, they introduce a consistent silver metallic accent that ties naturally into the Discovery Sport's interior trim language — particularly in vehicles specced with silver or brushed finishes elsewhere in the cabin. The high-gloss ABS surface is smooth, uniform, and resistant to the everyday wear that comes with regular use. Installation is entirely adhesive-based, meaning there is no drilling, no clipping, and no risk of damage to existing plastics. The double-sided tape backing creates a firm, rattle-free bond when applied correctly to a clean surface. For Discovery Sport owners who want a factory-quality result without workshop time, this is one of the most straightforward interior upgrades available. What's Included 🪄 Seat Belt Cover Trims × 2 Left and right front seat belt surrounds, silver ABS finish 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-fitted to each trim piece Product Highlights Precision-moulded ABS plastic for a consistent, factory-quality profile on both front seat belt pillars High-gloss silver finish complements chrome, silver, and brushed metallic interior accents throughout the Discovery Sport cabin Pre-applied double-sided adhesive ensures a firm, vibration-free bond with no tools required Specifically sized and shaped for the Discovery Sport L550 front seat belt surrounds — not a generic fit Lightweight construction adds no perceivable mass and does not interfere with belt operation ABS material is resistant to UV fading, heat distortion, and surface scratching under normal cabin conditions Reversible installation — trim pieces can be carefully removed without damaging factory plastics underneath Paired set covers both driver and front passenger seat belt positions for a symmetrical, finished result No drilling, cutting, or modification to factory components required at any stage of installation A low-cost, high-impact interior detail that elevates cabin presentation without a full interior refresh Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 2015–2021 Direct Fit Land Rover Discovery Sport L550 Facelift 2019–2021 Direct Fit Land Rover Discovery Sport L550 (2022+) 2022–Present Verify Before Purchase Range Rover Evoque L538 First Generation 2011–2018 Not Compatible Range Rover Evoque L551 Second Generation 2019–Present Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 minutes  ·  🔧 Tools Required: None Begin with the vehicle parked in a clean, well-lit environment. Ensure the interior temperature is comfortable — adhesive bonds most effectively between 15°C and 30°C. Thoroughly clean both front seat belt pillar surfaces using an isopropyl alcohol wipe or a clean microfibre cloth lightly dampened with IPA. Remove all dust, grease, and any existing residue. Allow to dry completely before proceeding. Before committing, dry-fit each trim piece against its corresponding pillar to confirm alignment and orientation. The trims are not identical — check left versus right positioning carefully. Peel the protective backing from the double-sided adhesive on the first trim piece. Align carefully with the seat belt surround area and press firmly into position, applying even pressure across the full surface for 30–60 seconds. Repeat the process for the second trim piece on the opposite side, maintaining the same alignment approach for a symmetrical result. Allow the adhesive to fully cure for a minimum of 24 hours before subjecting the trims to any stress, cleaning, or extreme temperature exposure. ⚠ Important: Do not attempt to install on a cold or damp surface. Adhesive performance is significantly reduced below 10°C or on surfaces that retain moisture. Skipping the surface-cleaning step is the most common cause of poor adhesion — do not rush this stage. Complete Your Discovery Sport Interior Browse the full range of Land Rover Discovery Sport interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If you are unsure, contact our team before ordering.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Silver Front Seat Belt Frame Cover Trim for Land Rover Discovery 4 LR4 & Range Rover Sport (2010–2016) A precision-fit interior trim upgrade that brings a clean, silver-accented finish to your Discovery 4 or Range Rover Sport's front seat belt surrounds — no cutting, no mess, no specialist tools required. Discovery 4 LR4 Range Rover Sport L320 2010–2016 ABS Plastic Silver Finish Adhesive Fit Interior Trim Set of 2 Overview The Land Rover Discovery 4 LR4 and second-generation Range Rover Sport L320 share an interior character defined by purposeful detailing — but the factory seat belt surrounds are an easy area to refresh. Over time, the standard plastic frames can look faded or simply feel out of place against a more refined or personalised cabin aesthetic. These ABS silver front seat belt frame cover trims are engineered to sit flush over the existing seat belt pillar frames, instantly lifting the look of the front cabin with a consistent metallic silver tone. The covers are formed from high-quality ABS plastic, laser-measured to match the original panel geometry of both the Discovery 4 and Range Rover Sport produced between 2010 and 2016. Installation uses pre-applied 3M-grade double-sided adhesive tape, making this a genuine five-minute job with zero risk to your original trim. Whether you're building out a full interior transformation or simply addressing a single detail, these covers deliver a proportionate, polished result that sits in keeping with the premium standard these vehicles were built to. What's Included 🪞 Front Seat Belt Frame Covers 2 pieces — driver & passenger side 🔧 Pre-Applied Adhesive 3M-grade double-sided tape pre-fitted 📦 Protective Packaging Individually wrapped to prevent transit damage Product Highlights Precision-moulded ABS plastic for exact panel fit Sleek silver finish complements factory chrome accents Pre-applied adhesive for tool-free installation Covers both driver and passenger seat belt frames Resistant to UV fading and cabin temperature changes Smooth surface finish — easy to keep clean Does not obstruct seat belt mechanism or operation Compatible with both LHD and RHD configurations Lightweight — adds no meaningful weight to the cabin Reversible installation — removable without trim damage Compatibility Vehicle Code Years Fit Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🛠 Difficulty: Beginner Clean the existing seat belt frame surrounds thoroughly using an isopropyl alcohol wipe. Ensure the surface is completely dry and free of dust, grease, or silicone-based products before proceeding. Dry-fit both covers against the seat belt frames before removing any adhesive backing. Confirm alignment and orientation on both the driver and passenger sides. Peel back the adhesive liner on one cover. Carefully position the trim piece against the seat belt frame, aligning all edges before making contact with the surface. Once correctly positioned, press firmly across the full surface of the cover for 20–30 seconds to ensure a strong adhesive bond. Repeat for the second piece. Allow 30–60 minutes before applying any pressure or stress to the newly fitted covers. Full adhesive cure is reached within 24 hours. ⚠ Note: Do not attempt installation in temperatures below 10°C — adhesive performance is significantly reduced in cold conditions. Avoid applying to surfaces recently treated with interior dressing or protectant sprays. Shop by Vehicle Looking to complement this trim with other interior upgrades? Browse the full curated accessory collections for your specific model below: 🚙 Discovery 4 LR4 2010–2016 accessories 🚙 Range Rover Sport L320 2005–2013 accessories 🚙 Discovery 5 2017–2024 accessories 🚙 Discovery 3 2004–2009 accessories Upgrade Your Discovery 4 Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior and exterior accessories. Worldwide shipping via DHL, FedEx, UPS and TNT — backed by our 30-day money-back guarantee. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL & FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Silver Gear Shift Panel Cover Trim Sticker — Land Rover Discovery 4 LR4 (2010–2016) A precision-fit silver ABS trim piece that instantly refreshes the gear shift surround of your Discovery 4, adding a cleaner, more refined feel to the centre console without a single tool required. Discovery 4 / LR4 2010–2016 ABS Plastic Silver Finish Direct Fit No Tools Required Interior Trim 2-Piece Set Overview The Land Rover Discovery 4 LR4 remains one of the most capable and characterful SUVs ever produced, and owners who live with one day-to-day know just how important the interior environment is. Years of use can leave the centre console area looking tired — particularly the gear shift panel surround, where contact and UV exposure gradually dull the factory finish. This ABS silver gear shift panel cover trim is engineered specifically for 2010–2016 Discovery 4 and LR4 variants. Each piece is precision-moulded from high-grade ABS plastic and finished in a satin silver tone that integrates cleanly with both light and dark Discovery 4 interior trims. Rather than a generic overlay, this trim is shaped to follow the exact contours of the factory panel, ensuring a flush, factory-quality appearance once applied. Installation requires no drilling, cutting, or specialist tools — the trim bonds using a pre-applied double-sided adhesive that holds securely against the original panel surface. It is the kind of detail-oriented upgrade that Discovery 4 owners appreciate: understated, purposeful, and immediately noticeable once fitted. What's Included 🧩 Gear Shift Panel Cover Trim 2 pieces — pre-cut ABS silver panels 🔲 Double-Sided Adhesive Pre-applied to reverse of each trim piece 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for 2010–2016 Discovery 4 LR4 gear shift panel High-grade ABS plastic — resistant to heat, flex, and everyday wear Satin silver finish complements both black and beige interior trims Pre-applied double-sided adhesive for clean, tool-free installation 2-piece set for full gear shift surround coverage Flush fitment follows factory panel contours precisely Lightweight construction — no impact on gear lever operation UV-stable finish resists fading and discolouration over time Reversible upgrade — can be removed without damaging original panels Ideal paired with other Discovery 4 interior trim upgrades Compatibility Vehicle Years Trim Level Fitment Land Rover Discovery 4 (LR4) 2010–2016 All Variants Direct Fit Land Rover Discovery 4 (LR4) — SE / HSE / HSE Luxury 2010–2016 SE / HSE / HSE Luxury Direct Fit Land Rover Discovery 3 (LR3) 2004–2009 All Variants Not Compatible Land Rover Discovery 5 2017–Present All Variants Not Compatible Range Rover Sport L320 2005–2013 All Variants Not Compatible Range Rover Vogue L322 2002–2012 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean the gear shift panel area using an isopropyl alcohol wipe to remove all dust, grease, and residue. Allow to dry completely before proceeding. Dry-fit the trim pieces to the panel to confirm alignment and positioning before removing the adhesive backing. Peel back a small portion of the adhesive protective film and carefully position the first trim piece, working from one edge to avoid air bubbles. Once aligned, apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Repeat the process for the second trim piece, ensuring both panels are level and seamlessly joined at any shared edge. Allow 24 hours for the adhesive to fully cure before exposing the trim to direct sunlight or high interior temperatures. Note: Ensure the original panel surface is completely dry and free from any polish, conditioner, or silicone-based products prior to fitting. These substances will significantly reduce adhesive bond strength and may cause the trim to lift over time. Complete Your Discovery 4 Interior This gear shift panel trim is just the beginning. Explore the full range of Discovery 4 interior accessories at Victorious Automotive — curated specifically for LR4 owners who take pride in every detail. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Side Door Audio Speaker Cover for Land Rover Discovery Sport 2015–2019 A precision-fit interior trim upgrade that brings a refined silver finish to your Discovery Sport's door speaker surrounds — no drilling, no fuss, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Direct Adhesive Fit Interior Trim Speaker Cover No Drilling Required Overview The Land Rover Discovery Sport (L550) occupies a unique position — practical enough for the school run, capable enough for a weekend trail, and refined enough to demand an interior that keeps up. From 2015 onwards, the Discovery Sport's cabin set a strong benchmark in its class, but like any vehicle, the small details are where character is either earned or lost. These ABS silver side door audio speaker covers are designed to replace the standard dark plastic surrounds on your Discovery Sport's door-mounted speakers, introducing a clean silver and black contrast that elevates the entire door card aesthetic. The result is an interior that looks intentionally specced — the kind of detail that owners notice, and passengers remark on. Constructed from high-grade ABS thermoplastic, these covers are engineered for the interior environment — resistant to heat, UV exposure from cabin light, and the daily wear that comes with an actively used vehicle. Installation requires no specialist tools and no permanent modification, making this one of the most satisfying upgrades you can make in under an hour. What's Included 🔊 Speaker Cover Set 1 complete set covering all relevant door speaker surrounds 🔧 Pre-Applied Adhesive Strong double-sided tape pre-fitted for clean, tool-free installation 📋 Installation Guide Step-by-step fitting instructions included in the package 🛡️ Protective Packaging Individually wrapped to prevent transit scratching Product Highlights High-grade ABS plastic construction — durable and cabin-safe in temperature extremes Silver and black dual-tone finish adds a premium, purposeful aesthetic to your door cards Precision-moulded for the Discovery Sport L550 door speaker surround geometry Pre-applied double-sided adhesive for a clean, tool-free installation Covers fit flush against the door card surface — no gaps, no movement Scratch and UV resistant surface coating maintains appearance long-term Does not obstruct or affect speaker acoustic performance in any way Reversible fitment — can be removed without damage to original trim Compatible with all Discovery Sport trims from 2015 to 2019 model years Consistent finish across all door positions for a factory-integrated look Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020 – 2024 Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 20–40 minutes  |  🔩 Tools Required: None Begin with a clean, dry interior. Use an IPA-based panel wipe or isopropyl alcohol cloth to thoroughly degrease the speaker surround area on each door card — this is the single most important step for adhesion longevity. Allow the cleaned surfaces to dry fully for at least 5 minutes before proceeding. Do not rush this step, particularly in cold or humid conditions. Dry-fit each cover piece against its corresponding speaker surround before removing the adhesive backing. Confirm alignment and orientation without committing. Peel the protective film from the pre-applied double-sided adhesive tape on the rear of the cover piece. Position the cover carefully against the speaker surround — starting from one edge and working across to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface of the cover for 30–60 seconds per piece to ensure full adhesive contact. Allow 24 hours for the adhesive to cure fully before subjecting the covers to any stress or cleaning. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F), as adhesive performance is significantly reduced in cold conditions. If fitting in winter, allow the vehicle to warm up to cabin temperature before beginning. Avoid contact with cleaning products containing silicone or wax on the bonded area for at least 48 hours post-installation. Complete Your Discovery Sport Interior Browse our full collection of Land Rover Discovery Sport interior and exterior accessories — curated for owners who take pride in every detail of their vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase. If in doubt, contact our team before ordering.