Automotive

Victorious Automotive · Range Rover Velar · Exterior Styling Rear Bumper Lower Diffuser Conversion for Range Rover Velar 2017+ Transform your standard Velar's rear end into the commanding Dynamic specification look — with a precision-engineered lower diffuser conversion that slots cleanly into place. Range Rover Velar 2017 Onwards Rear Diffuser Dynamic Conversion Laser Cut Precision Direct Fit Exterior Styling No Drilling Required Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — an SUV that blends architectural elegance with serious road presence. From launch, the Velar's Dynamic specification set it apart with a more aggressive lower rear treatment, featuring a pronounced diffuser section that gives the car a planted, performance-ready stance. If your Velar left the factory without it, you've likely noticed the difference. This rear bumper lower diffuser conversion is engineered specifically to replicate the Dynamic specification aesthetic on standard-trim Velars. Manufactured to exacting tolerances using laser-cut processes, each piece is shaped to match the precise geometry of the Velar's rear bumper — delivering a seamless result that looks entirely factory-fitted. No filler, no guesswork, no compromise on finish quality. Whether you're looking to complete a full exterior refresh or simply elevate the rear profile of your Velar to match the top-of-the-range spec, this conversion delivers the visual upgrade with the kind of fit and finish you'd expect from a premium aftermarket specialist. It's the detail that makes the difference. What's Included 🔲 Lower Diffuser Panel Dynamic-spec rear bumper lower section conversion piece 🔩 Fitting Hardware All required fixings and mounting clips included 📋 Installation Guide Step-by-step fitment instructions for a clean install ✅ Quality Check Tag Each unit inspected before dispatch Product Highlights Converts standard Velar to Dynamic rear specification Laser-cut manufacturing for precision panel alignment Direct fit — no cutting, drilling or modification required Designed specifically for Range Rover Velar 2017 onwards High-quality construction built to withstand road conditions Seamless integration with existing rear bumper geometry Clean, factory-finish appearance when installed correctly Lightweight — does not affect vehicle dynamics or performance Supplied with all necessary fitting hardware Straightforward installation suitable for home fitting Compatibility Vehicle Year Range Trim Fitment Range Rover Velar 2017 – 2022 Standard / S / SE / HSE Direct Fit Range Rover Velar 2017 – 2022 R-Dynamic (Dynamic Spec) Not Required Range Rover Velar 2023 Onwards (Facelift) All Trims Not Compatible Range Rover Evoque All Years All Trims Not Compatible Range Rover Sport L494 All Years All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Basic Hand Tools Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the rear bumper area. Carefully clean the lower rear bumper area to remove any road grime, wax or debris that may affect panel alignment or adhesion. Test-fit the diffuser conversion panel against the lower bumper to confirm alignment and familiarise yourself with the mounting points before final installation. Locate and engage the supplied mounting clips or hardware into the corresponding fixing points on the existing bumper structure. Press the diffuser panel firmly and evenly into position, working from the centre outward to ensure a flush, gap-free finish along all edges. Verify that all clips are fully seated, check panel alignment from a distance, and confirm no flex or movement is present before signing off the install. ⚠ Please Note: If your Velar is fitted with a tow bar, parking sensors, or aftermarket exhaust exits in the lower bumper area, please contact our team before ordering to confirm fitment compatibility. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Velar the Right Way Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium styling upgrades. Shipped worldwide via DHL, FedEx and UPS — and backed by our 30-day money-back guarantee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations and trademarks are the property of their respective owners and are referenced solely for the purpose of product fitment identification.

Victorious · Mercedes GLS · Exterior Trim 2020 Mercedes GLS High Gloss Black Exhaust Trim Precision-engineered exhaust finisher set that transforms the rear end of your GLS with understated luxury and flawless fitment. 2020 Model Mercedes GLS Stainless Steel High Gloss Black Direct Fit Overview The Mercedes GLS demands components that honour its refined character. This exhaust trim set has been engineered to deliver a seamless visual enhancement to your 2020 model, integrating with the factory rear fascia without compromise. Constructed from premium stainless steel and finished in elegant high gloss black, these trims offer immediate aesthetic uplift. The two-piece configuration ensures straightforward installation, while the material resists oxidation and thermal stress—critical for components positioned this close to the exhaust outlet. Whether you're prioritizing a subtle performance aesthetic or simply want to refine the rear profile, this trim set delivers. It's a finishing touch that catches light without shouting. What's Included 🔧 2x Exhaust Trim Finishers High gloss black stainless steel 📋 Installation Guide Step-by-step fitment reference 🛡️ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights Premium stainless steel construction resists corrosion and heat stress High gloss black finish maintains appearance through thermal cycling Two-piece set for symmetrical rear fascia coverage Direct fit design—no drilling, cutting, or welding required Factory-spec alignment with OEM exhaust outlets Lightweight profile preserves suspension geometry Simple adhesive and mechanical fastening method Compatible with factory paint protection films Thermal-rated materials ensure longevity under exhaust heat Instant visual refinement with zero performance impact Compatibility Vehicle Model Model Years Status Mercedes-AMG GLS 2020 Direct Fit Mercedes GLS 580 2020 Direct Fit Mercedes GLS 450 2020 Direct Fit Mercedes GLS (2021+) 2021–Present Not Compatible Other Mercedes Models All Years Not Compatible Installation Difficulty Level: Beginner | Time Required: 30–45 minutes Prepare the vehicle: Park on a level surface and allow the exhaust system to cool completely. Do not attempt installation while the vehicle is warm. Clean the rear fascia: Use a microfiber cloth and mild detergent to remove any dirt, oil, or residue from the area where the trim will be mounted. Dry thoroughly: Air-dry or use a clean cloth to ensure the surface is completely free of moisture before proceeding. Position the first trim: Align the left exhaust trim finisher with the factory exhaust outlet. Ensure it sits flush against the rear bumper fascia. Secure the first piece: Apply the provided adhesive strip to the back of the trim and press firmly into place for 10–15 seconds. If mechanical fasteners are included, install them according to the fitment guide. Install the right trim: Repeat the process for the second trim finisher, maintaining symmetry with the first piece. Cure time: Allow the adhesive to set for 24 hours before driving. Avoid washing or exposing the vehicle to moisture during this period. Final inspection: Once cured, inspect the fitment visually and by hand. Both trim pieces should sit flush with no gaps or movement. ⚠️ Important: Do not use the vehicle immediately after installation. Adhesive requires full cure time. High-speed driving or thermal shock before cure can compromise adhesion. If fasteners are used, ensure they are tightened to the specified torque to avoid vibration or loosening. Ready to Refine Your GLS? Add understated elegance to your 2020 Mercedes GLS with this precision-engineered exhaust trim set. Simple fitment, lasting durability, and the confidence that comes from owning components designed by enthusiasts for discerning owners. Shop Now Use discount code 22GET20 for 20% off any 2 items at checkout. ✓ 4.9/5 stars from 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any subsidiary. All product names and references are used for identification and compatibility purposes only. This product is an aftermarket accessory and does not carry any factory warranty from the vehicle manufacturer.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Tesla · Model S / X · Interior Carbon Fiber Navigation Frame – Tesla Model S & X Premium real carbon fiber trim that elevates your centre console with bold, modern styling. Model S / X 2014–2019 Real Carbon Fiber Easy Install Overview The Tesla Model S and Model X have become icons of electric performance and luxury. Their minimalist interiors demand equally refined accessories that enhance without compromising the original design language. This navigation frame is crafted from genuine carbon fibre and engineered specifically for 2014–2019 Model S and Model X vehicles. It frames your centre touchscreen with unmistakable carbon weave texture, adding depth, dimension, and visual interest to an otherwise flat dash. The frame is pre-cut to fit precisely, requiring only clean application via industrial-strength double-sided adhesive tape. If you value interior detail and want your Tesla to reflect the same precision engineering as its powertrain, this is the upgrade that delivers. The carbon weave catches light beautifully and complements both minimalist and personalized cabin aesthetics. What's Included 🎯 Carbon Fibre Frame Precision-cut, pre-formatted for direct fit 📦 Adhesive Backing Industrial double-sided tape pre-applied 📖 Fitment Guide Step-by-step installation instructions Product Highlights Genuine carbon fibre weave – not plastic or printed vinyl Precision-cut for 2014–2019 Model S & X Pre-applied industrial adhesive for hassle-free fitment Adds premium visual depth to centre console Minimal tools required – no drilling or modifications Complements OEM interior design language Durable finish resists fingerprints and UV fading Lightweight – no impact on vehicle dynamics Professional appearance suitable for any interior trim colour 30-day money-back guarantee Compatibility Model Year Range Fit Status Tesla Model S 2014–2019 Direct Fit Tesla Model X 2014–2019 Direct Fit Tesla Model S 2020+ Not Compatible Tesla Model X 2020+ Not Compatible Model 3 / Y All years Not Compatible Always verify your vehicle year and interior layout before ordering. If you're unsure, contact our team: +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Difficulty: Easy | Time: 15–20 minutes Power off the vehicle and allow the interior to cool to room temperature. Gently clean the centre console area around your navigation screen with isopropyl alcohol. Remove all dust, oils, and residue. Allow to dry completely (2–3 minutes). Carefully peel back the protective film from the adhesive backing on the carbon fibre frame. Position the frame around the navigation screen, ensuring all edges align flush with the dashboard contours. Press firmly from the centre outward, working air bubbles toward the edges. Apply steady pressure for 30 seconds to ensure full adhesion. Allow the adhesive to cure for 24 hours before using the touchscreen or adjusting the frame. Note: Do not force the frame into position if it doesn't sit flush. Reposition and try again. The double-sided tape provides excellent hold once properly applied, but cannot be repositioned repeatedly without losing adhesive strength. Ready to Transform Your Model S or X? This carbon fibre navigation frame is the finishing touch your Tesla deserves. Precision-engineered, premium materials, and installed in under 20 minutes. Your interior will thank you. View in Shop Use code 22GET20 to save 20% on any 2 items. ⭐ 4.9/5 stars ✓ 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS ↩️ 30-day money-back Victorious Automotive is not affiliated with Tesla Inc., Elon Musk, or any Tesla subsidiaries. Tesla is a registered trademark of Tesla Inc. This product is an aftermarket accessory designed for compatibility with specified Tesla models. Always consult your vehicle manual and verify fitment before installation.

Tesla · Model 3 · Interior Trim Carbon Fibre Dashboard for Tesla Model 3 Authentic carbon fibre dashboard upgrade that transforms your Model 3's interior with contemporary luxury and precision engineering. T3 2016–2019 Carbon Fibre One-Piece Design Matte & Glossy Overview This carbon fibre dashboard panel is engineered specifically for Tesla Model 3 (2016–2019), delivering a seamless interior upgrade that elevates your driving environment. Built from authentic carbon fibre with precision laser-cut accuracy, this dash panel replaces the factory unit with minimal effort and zero compromise on fit quality. The one-piece design eliminates panel lines and visual breaks, creating a modern, cohesive look that complements the Model 3's minimalist aesthetic. Choose between matte for a subtle, technical appearance or glossy for high-impact visual presence. Pre-applied adhesive makes installation straightforward—no additional bonding agents or specialist tools required. Whether you're refining your cabin's visual hierarchy or adding genuine carbon fibre accents throughout, this dashboard panel works as both a standalone upgrade and part of a complete interior transformation. It's built for enthusiasts who demand quality materials, precision fit, and understated luxury. What's Included 📦 Carbon Fibre Dashboard Panel Precision laser-cut, one-piece design 🔧 Pre-Applied Adhesive Ready to install, no extra bonding needed 📋 Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fibre construction Precision laser-cut for flawless fit One-piece seamless design Matte or Glossy finish options Pre-applied premium adhesive Contemporary, minimalist aesthetic Lightweight material adds no weight penalty Durable, UV-resistant finish Easy DIY installation Tailored for 2016–2019 Model 3 Compatibility & Variants Model & Year Fit Finish Options Tesla Model 3 (2016–2019) Direct Fit Matte, Glossy Tesla Model 3 (2020+) Not Compatible — Installation Difficulty: Beginner | Time: 20–30 minutes Power off vehicle and disable any active displays or autopilot functions. Gently remove the factory dashboard panel using a trim removal tool or soft plastic lever. Clean the underlying surface thoroughly with isopropyl alcohol and allow to dry completely. Carefully peel back the pre-applied adhesive backing and position the carbon fibre panel, starting from the centre and working outward. Press firmly across the entire surface to ensure full contact and adhesion. Allow 24 hours of cure time before operating any dashboard controls or adjusting the panel. Important: Verify your Model 3 year (2016–2019) before purchase. Interior panel dimensions and fitment vary between production runs. If you're unsure, contact support at +44 203 943 9919 (Mon–Fri 9am–7pm) for confirmation. Ready to Upgrade Your Interior? Transform your Tesla Model 3's cabin with authentic carbon fibre that combines modern aesthetics with premium material quality. Direct Fit for 2016–2019 models, installed in under 30 minutes. Add to Cart Use code 22GET20 for 20% off when you order 2+ items. ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with or endorsed by Tesla, Inc. or any official Tesla subsidiary. All vehicle names and trademarks are property of their respective manufacturers. This product is an aftermarket accessory designed for independent use and customisation.

Tesla · Model 3 · Interior Storage Key Card Holder for Tesla Model 3 Keep your key card secure and within arm's reach with this precision-engineered acrylic holder that integrates seamlessly into your Model 3's interior. Model 3 2017–2024 Premium Acrylic Quick Install OEM Look Overview Tesla Model 3 owners appreciate a minimalist cabin, but everyday essentials still need a home. Your key card deserves a dedicated space that's both functional and elegant—not rattling around in a cup holder or tucked into a door pocket. This custom-designed key card holder is engineered to fit the specific dimensions of your Model 3's keycard whilst complementing the engine start panel. Machined from premium acrylic with a satin black finish, it keeps your card instantly accessible during every drive without compromising the clean, modern aesthetic of your interior. Installation takes under two minutes with included 3M adhesive—no drilling, no permanent modifications. The holder grips your card firmly enough to prevent movement on corners and acceleration, yet allows effortless retrieval when you need it. What's Included 📦 Key Card Holder Premium acrylic, satin black, ready to install 🔧 3M Adhesive Strips Pre-applied, removes cleanly if needed Product Highlights Precision-engineered to match Model 3 key card dimensions exactly Premium acrylic construction—durable, scratch-resistant, temperature stable Satin black finish blends with OEM interior trim seamlessly Simple adhesive installation under 2 minutes, no tools required Secures card firmly without movement during acceleration or cornering Minimal footprint—only 99mm × 80mm × 3mm, unobtrusive on your dash Positioned near engine start button for natural, instinctive access Preserves original interior aesthetic and resale value perception Lightweight at just 5g—zero impact on vehicle dynamics Designed specifically for Model 3 (all variants, all years) Compatibility Tesla Model 3 Variant Model Years Compatibility Model 3 (Standard Range) 2017–2024 Direct Fit Model 3 (Long Range) 2017–2024 Direct Fit Model 3 (Performance) 2017–2024 Direct Fit Model 3 Highland (2024+) 2024–Present Direct Fit Installation Difficulty: Beginner | Time: Under 2 Minutes Clean the surface. Wipe the dashboard area near your start button with a dry, lint-free cloth. Remove any dust or residue for optimal adhesive bond. Peel the 3M backing. Carefully remove the adhesive strip backing from the rear of the holder. Handle by edges to avoid contaminating the adhesive. Position and press. Align the holder just above or beside your engine start button. Press firmly for 10 seconds to activate the adhesive bond. Insert your key card. Once set, slide your Model 3 key card into the holder. It should sit snugly without forcing. Wait 24 hours. Allow adhesive to cure fully before aggressive driving or movement of the card. Gentle use is fine immediately. Note: This adhesive is removable but will leave minimal residue if you later decide to take it off. Test adhesive compatibility on a hidden interior surface first if your Model 3 has custom vinyl or paint protection. Complete Your Model 3 Interior Simple, elegant, functional. Exactly what your Tesla deserves. Join thousands of Model 3 owners who've solved the key card storage question with this precision holder. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with Tesla, Inc., or any official Tesla distributor. All vehicle names, logos, and trademarks are property of their respective manufacturers and are used for identification only. Product compatibility is based on standard fitment; please verify your vehicle configuration before purchase. Victorious Automotive assumes no liability for improper installation or use.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Dashboard Trim — Range Rover Velar 2017–2020 Instantly elevate your Velar's cabin with a precision-cut matte silver dashboard control trim that delivers the SVR aesthetic without lifting a screwdriver. Range Rover Velar 2017–2020 Matte Silver ABS TPU Clip-On Fit SVR Look Interior Trim No Tools Required Overview The Range Rover Velar introduced one of the most refined and minimalist interiors ever seen in a production SUV — a clean, driver-focused cockpit defined by seamless surfaces and a near-buttonless dashboard. It's a space that rewards attention to detail, and even subtle upgrades are immediately noticeable to anyone who knows the car. This ABS matte silver dashboard control trim is engineered specifically for the 2017–2020 Range Rover Velar. Laser-cut to match the exact contours of the existing dashboard panel, it clips directly over the factory surface with no adhesive, no drilling, and no modification of any kind. The matte silver TPU finish introduces a premium, tactile contrast to the Velar's typically dark interior palette — closely mirroring the interior specification found on top-tier SVR and HSE Dynamic derivatives. Whether you're building out a full interior package or simply refreshing the cabin with a single accent piece, this trim is one of the most cost-effective ways to change the visual character of your Velar's centre dashboard zone. The clip-on design means it's reversible at any time — perfect if you're keeping the car near-standard for resale while still enjoying a more personalised drive every day. What's Included 🪄 Dashboard Trim Panel Matte silver ABS TPU, laser-cut to Velar spec 📎 Pre-Fitted Clips Factory-aligned retention clips, no extras needed 📄 Installation Guide Simple step-by-step fitting instructions included 🛡️ Protective Packaging Foam-padded to prevent transit scratches Product Highlights Precision laser-cut for an exact, flush fit on the Velar dashboard Clip-over installation — no tools, adhesive, or drilling required Premium matte silver TPU finish resists fingerprints and glare Fully reversible — restores to factory standard in minutes Replicates the SVR and HSE Dynamic interior specification Compatible with all trim levels across the 2017–2020 Velar range Part of a wider Velar interior package for a coordinated look Lightweight construction with no impact on dashboard function Durable ABS core maintains shape in high cabin temperatures Ships worldwide via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S / SE / R-Dynamic SE / HSE / HSE Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Verify Before Order Range Rover Velar SVAutobiography 2017–2020 SVAutobiography Dynamic Direct Fit Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 All Years All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 5–10 Minutes  |  🛠 Tools Required: None Ensure the existing dashboard surface is clean and free from dust or oils — a dry microfibre cloth works well. Remove the trim piece from its protective packaging and orient it correctly against the dashboard control zone to confirm alignment before fitting. Starting from one edge, align the integrated clips with the factory panel edges and apply gentle, even pressure along the trim length. Work along the full length of the piece, pressing each clip into place until you hear or feel a secure engagement at each point. Run your finger along the full perimeter to confirm a flush, gap-free fit against the dashboard surface. No adhesive or finishing required. Note: Avoid forcing the trim if resistance is felt — recheck alignment before applying further pressure. Do not use heat guns or adhesives, as these may damage the factory dashboard surface or void your vehicle warranty. Complete Your Velar Interior This dashboard trim is part of our full Range Rover Velar interior accessory collection. Pair it with matching silver accent pieces for a truly coordinated cabin transformation. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Elevate the rear cabin of your Velar with a precision-cut matte silver TPU trim cover that delivers the SVR aesthetic in minutes — no tools, no fuss. Range Rover Velar 2017–2020 Matte Silver TPU Material Clip-On Fit SVR Look Rear Climate Control Interior Upgrade No Drilling Overview The Range Rover Velar arrived as one of Land Rover's most design-forward models — a cabin defined by clean lines, flush surfaces, and minimalist touches that set it apart from anything else in the segment. But even a vehicle this considered leaves room for the kind of detail that separates a standard specification from something truly special. The rear climate control panel is one of those areas: functional, often overlooked, and entirely worthy of an upgrade. This matte silver rear air conditioning trim is engineered specifically for the Range Rover Velar produced between 2017 and 2020. Precision laser-cut from high-quality TPU (thermoplastic polyurethane), it clips directly over the existing rear climate cover with no adhesives, no cutting, and no permanent modification. The result is a clean, factory-quality finish that immediately draws the eye — exactly the kind of detail you'd find on the flagship SVR models. Forming part of the wider Victorious interior package for the Velar, this trim works beautifully in isolation or as part of a cohesive cabin refresh. Whether you're building out a full interior upgrade or simply refining one detail at a time, this is the kind of piece that quietly elevates the entire space. What's Included 🪟 Rear A/C Trim Cover 1× matte silver TPU clip-on panel 📄 Fitting Guide Step-by-step installation instructions 📦 Protective Packaging Secured for safe international delivery Product Highlights Precision laser-cut for exact fitment on the Velar rear climate panel High-quality TPU construction — flexible, durable, scratch-resistant Matte silver finish replicates the SVR interior aesthetic Clips directly over the existing cover — zero permanent modification No tools, adhesives, or professional installation required Part of the full Victorious Velar interior upgrade package Consistent colour tone across matte silver interior trim collections Maintains full functionality of rear climate controls post-fit Lightweight and precisely formed — no panel gap or flex Reversible install — original cover restored in seconds if needed Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar 2021–2023 All Trims (facelift) Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 2012–2019 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Ensure the rear cabin area is clean and free of dust or moisture before beginning installation. Remove the matte silver trim piece from its protective packaging and orient it correctly against the existing rear climate control panel. Starting from one edge, gently align the trim clip along the outer perimeter of the existing cover, ensuring the cutouts line up with the air vents and control slots. Apply even, gentle pressure across the surface until all clips engage with an audible click — confirming a secure, flush fit. Run a finger lightly around all edges to confirm there are no gaps or lifted sections. Test rear climate controls to verify full function is retained. Note: This trim is designed for the pre-facelift Range Rover Velar (2017–2020 only). Panel dimensions differ on 2021+ models. If you're unsure of your build year, check your VIN plate or contact us before ordering. Complete the Look This rear A/C trim is one part of a full Victorious interior upgrade package for the Range Rover Velar. Explore matching silver trim pieces for the dashboard, door panels, and centre console to achieve a cohesive, factory-grade SVR-inspired finish throughout the cabin. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Upgrade your climate control panel with genuine carbon fibre styling—the SVR look, simplified installation, and premium finish. Velar 2017–2020 Carbon Fibre Climate Control SVR Look Interior Package Overview Your Range Rover Velar deserves an interior that reflects its premium character. This carbon fibre rear air conditioning trim is engineered to elevate the climate control area—a detail that transforms the entire dashboard aesthetic. Built from high-quality carbon TPU with precision laser-cut edges, it delivers the aggressive, purposeful look of SVR models without modification or permanent alteration. Installation takes minutes. The trim simply clips over your existing climate cover, requiring no drilling, adhesives, or professional fitment. Perfect laser alignment ensures a factory-tight finish that integrates seamlessly with your dashboard geometry. Whether you're building a carbon interior package or adding statement detail, this piece combines visual impact with authentic material quality—a hallmark of Victorious Automotive builds. What's Included 🎨 Carbon Fibre Trim Rear A/C panel, precision-cut ✓ Clip-On Fitting No adhesive or drilling needed 📖 Fitting Guide Step-by-step instructions 🛡 30-Day Guarantee Money-back assurance Product Highlights Premium Carbon Fibre TPU Material Laser-Cut for Perfect Fit Clip-Over Installation (No Tools Required) SVR Model Aesthetic Factory-Aligned Edges Non-Permanent Fitment Compatible with 2017–2020 Velar Part of Carbon Interior Packages Durable Protective Coating Worldwide Shipping Available Compatibility Vehicle Year Range Compatibility Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Other Range Rover Models All Years Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Turn off your vehicle and allow the climate control system to cool. Gently locate the existing rear air conditioning trim panel in your climate control area. Position the carbon fibre trim against the original panel, aligning the clip points. Press firmly and evenly until all clips engage and the trim sits flush. Verify that all edges align with adjacent trim panels and dashboard surfaces. Step back and enjoy your new SVR-inspired interior detail. Important: Do not force clips. If resistance is felt, realign the trim and try again. Forcing may damage the clip points. Ready to Elevate Your Velar? This carbon fibre rear air conditioning trim is the detail that transforms a dashboard. Premium material, flawless fit, and the SVR look—all without complexity. Add it to your build today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping — DHL, FedEx, UPS ✓ Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and designs are the property of their respective manufacturers. Product compatibility is based on original equipment specifications; fitment may vary based on vehicle condition and previous modifications.

Victorious Automotive · Range Rover Velar · Interior Styling Pillar Vent Matte Silver Covers for Range Rover Velar 2017–2020 A precision-fitted, tool-free upgrade that transforms the Velar's cabin vent surrounds from understated to genuinely refined — in under two minutes. Range Rover Velar 2017–2020 High-Grade ABS Matte Silver Direct Fit Adhesive Install 2-Piece Set Interior Trim Overview The Range Rover Velar sits at a fascinating intersection — a vehicle designed to be genuinely beautiful, with a cabin that rivals the best of European luxury. Land Rover invested heavily in the Velar's interior architecture, with flush surfaces, minimal controls, and a sense of deliberate restraint. Yet for all its considered design, the standard pillar vent surrounds remain a notably plain detail — an area where the factory finish simply doesn't match the ambition of the rest of the cabin. These Matte Silver Pillar Vent Covers are designed to address exactly that. Produced from high-quality ABS with a consistent matte silver finish, each piece is precision-moulded to sit flush against the Velar's existing vent architecture. The result is a subtle but immediately visible improvement — a finish that reads as more premium, more intentional, and far more cohesive with the Velar's wider interior language. What makes this upgrade genuinely compelling is the combination of visual payoff and minimal commitment. There's no drilling, no cutting, no risk to your interior trim. Pre-applied 3M-grade adhesive tape means the covers bond firmly to the original surface with steady hand pressure — permanently transforming the look of your cabin without any permanent modification. What's Included 🔲 Matte Silver Vent Covers 2-piece set, pre-fitted with adhesive backing 🩹 Pre-Applied Adhesive Tape 3M-grade, factory-applied to each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights High-grade ABS construction for lasting durability Consistent matte silver finish, uniform across both pieces Precision-moulded for exact fitment on Velar pillar vents Pre-applied adhesive — no tools or hardware required Installation time under 2 minutes from unboxing 2-piece set covering both pillar vent positions No drilling, cutting, or irreversible modification Compatible with all trim levels of the 2017–2020 Velar Colour-consistent with popular Velar interior silver accents Elevates the factory interior without altering OEM components Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S Direct Fit Range Rover Velar 2017–2020 SE Direct Fit Range Rover Velar 2017–2020 HSE Direct Fit Range Rover Velar 2017–2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017–2020 First Edition Direct Fit Range Rover Velar 2021 onwards All Not Confirmed Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 / L551 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Before fitting, clean the existing vent surround surface thoroughly with an isopropyl alcohol wipe to remove any dust, grease, or residue. Allow to dry completely. Remove the protective film from the pre-applied adhesive tape on the reverse of each vent cover. Align the first cover carefully over the pillar vent — take a moment to confirm positioning before making contact with the surface. Once aligned, press firmly and evenly across the entire cover for 20–30 seconds to ensure a strong initial bond. Repeat for the second piece on the opposing vent position. Allow 24 hours for the adhesive to fully cure before exposing to direct sunlight or extreme temperatures. Note: Ensure the application surface is completely clean and dry before fitting. Attempting to install over dust, wax, or moisture will significantly reduce adhesive performance. Do not attempt to reposition covers once the adhesive has made contact with the surface. Complete Your Velar's Interior Browse our full Range Rover Velar collection for more precision-fit interior and exterior upgrades, hand-picked by our specialist team for owners who hold their vehicles to a higher standard. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious · Mini · Interior Bling Diamond Swarovski Surround for Mini Steering Wheel Add luxury sparkle to your Mini's cabin with premium Swarovski-style crystal trim and effortless stick-on installation. Mini F60 F56 R60 R58 Swarovski Crystal Gold & Silver Easy Install Pre-Applied Adhesive Overview Mini owners who demand personalisation understand that every detail counts. The steering wheel is one of the most visible focal points in your cabin—it's where your hands spend countless hours, and it sets the tone for your entire driving experience. This Diamond Swarovski Surround transforms that everyday component into a statement of elegance and individuality. Crafted from high-quality materials with genuine Swarovski-style crystals, this steering wheel trim catches light beautifully and adds an unmistakable touch of luxury to your Mini's interior. The surround features precise engineering to fit your steering wheel perfectly, with a sleek profile that complements both modern and classic Mini aesthetics. Choose between stunning Gold or Silver finishes to match your cabin's existing trim and personal taste. Installation takes minutes, thanks to the pre-applied adhesive backing—no tools, no mess, no guesswork. Clean, apply, and drive with newfound confidence. What's Included ✨ Steering Wheel Trim Diamond Swarovski-style surround 🔧 Pre-Applied Adhesive Ready to install straight from box 📦 Premium Packaging Secure, pristine delivery Product Highlights Genuine Swarovski-style crystal design for authentic luxury sparkle Premium high-quality materials engineered for lasting elegance Gold or Silver finish—choose to match your cabin aesthetic Pre-applied adhesive tape for hassle-free, tool-free installation Precision-fit design for Mini F60, F56, F55, F54, R60, R58, R55 models Lightweight and durable—won't affect steering wheel functionality Easy to clean and maintain with standard automotive care products Adds personalised luxury without permanent modification Professional-grade finish rivals OEM trim quality Express individuality while maintaining resale appeal Compatibility Mini Model Year Range Compatibility F60 Countryman 2017–2024 Direct Fit F56 Hatch 3rd Gen 2014–2023 Direct Fit F55 Clubman 2nd Gen 2015–2023 Direct Fit F54 Clubman 1st Gen 2007–2015 Direct Fit R60 Countryman 1st Gen 2010–2017 Direct Fit R58 Coupe 2011–2015 Direct Fit R55 Clubman 1st Gen 2007–2014 Direct Fit R56 Hatch 2nd Gen 2006–2014 Not Compatible Installation Guide Difficulty: Beginner | Time: 5–10 minutes Prepare the surface. Ensure your steering wheel is completely clean and dry. Use a microfibre cloth and mild automotive cleaner to remove any dust, oils, or residue from the rim area. Position the trim. Carefully align the Diamond Swarovski Surround with your steering wheel. Start at the top centre and work your way around to ensure even placement. Apply with confidence. Press firmly along the entire length of the trim, starting from the centre and working outward. The pre-applied adhesive will bond immediately to a clean surface. Allow cure time. Let the adhesive set for 24 hours before using your steering wheel normally. Avoid forceful gripping during this period. Enjoy your upgrade. Your Mini now features a stunning luxury accent that catches every light and turn. Important: Clean the steering wheel thoroughly before installation. Any dust or residue will compromise adhesion and longevity. If the surface is not pristine, adhesive may fail prematurely. Ready to Add Luxury to Your Drive? Transform your Mini's interior with this stunning diamond Swarovski steering wheel surround. Premium finish, effortless installation, and a touch of everyday elegance—all backed by Victorious's 30-day money-back guarantee and 4.9★ customer trust. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money-Back Guarantee ✓ 4.9★ Rating • 12,300+ Reviews ✓ Worldwide Shipping • DHL, FedEx, UPS ✓ Expert Support • +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mini, BMW Group, Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any official manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for aftermarket customisation only.

Premium Automotive · BMW Mini Cooper · Interior Trim Carbon Fiber Gear Shift Panel Cover for BMW Mini Cooper F54–F60 (2014–2023) OEM-style carbon fiber accent that elevates your interior with authentic motorsport styling and scratch protection. F54 / F55 / F56 / F57 / F60 2014–2023 Carbon Fiber Tool-Free Install Pre-Applied Tape Overview Built for the Mini Cooper enthusiast who refuses to compromise on detail. This carbon fiber gear shift panel cover is engineered to integrate seamlessly with F54, F55, F56, F57, and F60 models, adding a layer of premium aesthetic to your cockpit while protecting the OEM panel beneath from daily wear. Constructed from authentic carbon fiber weave, this accent delivers the visual impact of motorsport-grade finishes without the complexity. The pre-applied double-sided adhesive system ensures installation takes minutes—no cutting, no drilling, no specialist tools. Simply clean, align, and press. The result is a bespoke interior upgrade that feels factory-correct. Whether you're refreshing a standard interior or complementing other carbon fiber trim, this panel cover transforms the gear shift zone into a focal point of texture and sophistication. Durable UV-resistant construction resists fading and maintains its high-gloss finish for years. What's Included 📦 Carbon Fiber Cover 1x pre-cut panel, ready to install 🔗 Pre-Applied Adhesive Tape Double-sided 3M tape, no mess, no fuss 🧹 Cleaning Cloth Microfiber for surface prep 📖 Installation Guide Step-by-step visual instructions included Product Highlights Authentic 2×2 carbon fiber twill weave for premium motorsport appearance Custom-engineered fitment for Mini Cooper F54, F55, F56, F57, F60 (2014–2023) Pre-applied 3M automotive-grade double-sided tape for hassle-free installation Protective barrier shields OEM gear panel from scratches, spills, and UV exposure UV-resistant resin coating maintains gloss and prevents color fade over time Precision-cut edges align perfectly with OEM panel geometry—no trimming needed Zero-tool installation—no drilling, no modifications, completely reversible Complements OEM carbon fiber trim packages and custom interior builds Lightweight composite construction adds zero rotational mass or interior weight Backed by 30-day money-back guarantee and Victorious Automotive customer support Compatibility Table Model Code Production Years Fitment Status Mini Cooper F54 Clubman 2015–2023 Direct Fit Mini Cooper F55 Hatchback 2014–2023 Direct Fit Mini Cooper S F56 Hatchback 2014–2023 Direct Fit Mini Cooper S F57 Convertible 2016–2023 Direct Fit Mini Countryman F60 2017–2023 Direct Fit Mini Cooper F56 SE Electric 2019–2023 Direct Fit Pre-F54 / Older Mini Models 2013 and earlier Not Compatible Manual Transmission Models All years Direct Fit Installation Notes Difficulty Level: Beginner | Estimated Time: 5–10 Minutes Prepare the Surface: Switch off the engine and allow the interior to reach room temperature. Use the included microfiber cloth to clean the OEM gear panel thoroughly. Remove any dust, oils, or residue with a light degreaser if needed. Let dry completely. Inspect the Cover: Unbox the carbon fiber panel and inspect for any visible damage. Check the pre-applied adhesive tape—it should feel slightly tacky and show no visible dirt. Align the Cover: Carefully position the cover above the gear panel. Start at one end (typically the top) and lower it slowly, aligning all edges. Take time with this step—adhesive bonds are permanent on first contact. Press and Secure: Once aligned, press firmly across the entire surface for 30 seconds, working from top to bottom to eliminate air pockets. Apply pressure with your palm or a soft rubber applicator (do not use hard tools). Allow Full Cure: Leave the vehicle undisturbed for 24 hours before touching or shifting gears. The adhesive reaches full strength within this window. ⚠️ Important: This cover is permanent once applied. Ensure surface cleanliness and alignment before pressing down. If repositioning is needed within 30 seconds of contact, carefully peel back and realign. Do not force removal after 1 minute—adhesive will have begun bonding. Elevate Your Mini Interior Today A genuine carbon fiber panel cover transforms your gear shift zone from standard to statement. Authentic materials, zero compromise, zero installation hassle. Shop Carbon Fiber Gear Covers Add any 2 items and use code 22GET20 for 20% off your order. 4.9/5 Stars — 12,300+ verified reviews 30-Day Guarantee — Full refund, no questions asked Worldwide Shipping — DHL, FedEx, UPS, TNT Expert Support — +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with, endorsed by, or manufactured by BMW Group, BMW Mini, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. This listing is for reference only.

Victorious Automotive · Range Rover Velar / Evoque · Interior Trim Aluminum Alloy Air Conditioning & Volume Knob Ring Trim — Range Rover Velar & Evoque 2017–2020 Precision-machined aluminum alloy trim rings that upgrade your climate and volume controls with a tactile, premium finish worthy of the cabin they inhabit. Range Rover Velar 2017–2019 Range Rover Evoque 2019–2020 Aluminum Alloy 3-Piece Set No-Tool Fit Blue · Red · Silver Interior Trim AC & Volume Controls Overview The Range Rover Velar and second-generation Evoque are among the most design-forward vehicles Land Rover has ever produced. Every surface in the cabin is considered — and the rotary controls for climate and audio are no exception. As daily-use touch points, they deserve the same level of finish as the rest of the interior architecture. These aluminum alloy knob ring trim pieces are precision-formed to sit flush over the existing air conditioning and volume control dials, adding a machined, anodised layer of quality that the factory finish simply doesn't deliver. Available in three colourways — Blue, Red, and Silver — they allow you to personalise the feel of your cockpit without modifying anything permanently. Designed specifically around the factory knob profiles of the Velar (2017–2019) and Evoque (2019–2020), each ring fits cleanly and securely with no adhesive required. The result is an immediate visual and tactile upgrade that takes under a minute to achieve — and is entirely reversible. What's Included 🔘 AC Knob Ring × 2 Fits left and right climate control dials 🎚️ Volume Knob Ring × 1 Fits central audio/volume rotary control 📦 Full 3-Piece Set All three rings included per order Product Highlights Precision-machined aluminum alloy construction Available in Blue, Red, and Silver anodised finishes Designed to fit factory knob profiles exactly No tools, adhesive, or modification required Direct press-fit installation in under 60 seconds Covers all three main rotary controls (3-piece set) Fully reversible — remove without damage any time Adds premium tactile and visual quality to the cockpit Lightweight construction — adds no perceptible weight Purpose-built for Velar 2017–2019 and Evoque 2019–2020 Compatibility Vehicle Year Range Fit Notes Range Rover Velar 2017 · 2018 · 2019 Direct Fit All trim levels Range Rover Evoque (L551) 2019 · 2020 Direct Fit 2nd Gen Evoque (L551) Range Rover Evoque (L538) 2011–2018 Not Compatible Different knob profile — 1st Gen Range Rover Velar (2020+) 2020–present Verify Before Purchase Minor interior updates may affect fit Range Rover Sport L494 2013–2020 Not Compatible Different rotary control design Defender L663 2020–present Not Compatible Different climate control layout Installation Notes ⏱ Estimated Time: Under 5 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure the vehicle is off and the interior is clean and dry around the control area. Select your preferred colourway (Blue, Red, or Silver) before beginning. Align the first aluminum ring over the corresponding factory knob — match the centre bore carefully. Apply gentle, even downward pressure until the ring seats flush against the dial surround. Repeat for the remaining two rings — volume control and second AC dial. Check each ring is fully seated and turns freely with the knob beneath it. No adhesive is required or recommended. ⚠ Please Note: These rings are designed as press-fit overlays. Do not force or apply excessive pressure. If resistance is felt, check alignment before proceeding. Verify your exact model year before ordering — interior specifications can vary between production runs within the same year. Elevate Every Touch Point The controls you reach for most deserve the same standard as the rest of your Range Rover's interior. Upgrade your Velar or Evoque with confidence — backed by our 30-day money-back guarantee and 4.9-star rated service. Shop Range Rover Velar Accessories Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Head Pillow Adjustment Decoration Button Trim for Range Rover Velar 2017–2022 ABS chrome button trim that elevates the headrest adjustment controls on your Range Rover Velar — a small detail that makes an immediate visual difference inside the cabin. Range Rover Velar 2017–2022 ABS Chrome Interior Moulding 5 Colour Options 3M Adhesive Fit ISO9001 Certified LLK780 Overview The Range Rover Velar was designed from the outset to blur the line between sculpture and vehicle — its interior is one of the most refined in the SUV class. For owners who take that philosophy seriously, every surface matters, including the small but frequently touched headrest adjustment buttons. Left in their standard form, these controls can look surprisingly plain against the Velar's otherwise considered cabin design. This ABS chrome decoration trim for the head pillow adjustment buttons addresses exactly that. Precision-formed to sit flush over the factory controls, it introduces a polished or colour-matched accent at one of the most visible points in the rear seat area. Available in five finishes — Silver, Gold, Red, Black, and Blue — there's an option to complement either a factory interior palette or a more personalised build. Certified to ISO9001 manufacturing standards and backed by the metyoucar LLK780 model specification, this trim is built to the kind of tolerances that won't look out of place in a premium British SUV. If you're refining the Velar's interior one considered piece at a time, this is exactly the level of detail worth attending to. What's Included 🪄 Chrome Button Trim Set ABS chrome headrest adjustment button covers 🔲 3M Adhesive Backing Pre-applied for clean, tool-free installation 📋 Installation Guide Basic fitting reference included Product Highlights Precision-moulded ABS chrome construction for a factory-quality finish Available in 5 finishes: Silver, Gold, Red, Black, and Blue Pre-applied 3M adhesive — no drilling, no tools required Designed specifically for the Range Rover Velar headrest adjustment buttons ISO9001 certified manufacturing for consistent quality control Lightweight at just 12g — no impact on headrest function or movement Direct fit over OEM controls with no modification needed Chrome finish resists fingerprints and light surface wear Subtle upgrade with a high visual impact in the cabin Colour options suit both standard and custom interior specifications Compatibility Vehicle Year Range Fitment Range Rover Velar 2017–2022 Direct Fit Land Rover Discovery Sport 2015–2017 Direct Fit Range Rover Sport L494 2013–2020 Verify Before Ordering Range Rover Vogue L405 2013–2020 Verify Before Ordering Land Rover Discovery 5 2017–2022 Verify Before Ordering Range Rover Velar (2023+) 2023–Present Not Compatible If your vehicle is not listed or you're unsure, please contact us at +44 203 943 9919 before ordering. Our team is available Monday to Friday, 9am–7pm. Installation Notes Difficulty: Very Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Clean the headrest adjustment button surface thoroughly using an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond. Identify the correct trim piece for each button position (refer to any included guide or test-fit without removing the adhesive backing first). Peel back the 3M adhesive protective layer from the rear of the trim piece. Align the trim carefully over the headrest button and press firmly into position for 20–30 seconds to activate the adhesive bond. Allow 24 hours before applying any significant pressure or cleaning around the fitted area to ensure full cure. ⚠ Note: Do not install on damp, greasy, or cold surfaces. In cooler climates, allow the trim and adhesive to reach room temperature before fitting. Attempting to reposition after initial adhesion may reduce bond strength. Browse More for Your Vehicle 🚙 Range Rover Velar Shop the full Velar collection → 🚙 Discovery Sport Shop Discovery Sport accessories → 🚙 Land Rover Discovery 5 Shop Discovery 5 accessories → Elevate Every Detail Thousands of Range Rover and Land Rover owners trust Victorious Automotive to help them finish their vehicles to the standard these machines deserve. Rated 4.9/5 from over 12,300 verified reviews. Shop All Velar Accessories Use code 22GET20 — save 20% when you buy any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Evoque · Interior Trim Matte Silver ABS Rear Row Cup Holder Cover Trim — Range Rover Evoque 2019–2020 A precision-fit interior trim piece that brings a refined matte silver accent to your Evoque's rear cup holder surround — installed in minutes, no tools required. Evoque L551 2019–2020 ABS Plastic Matte Silver Rear Interior Cup Holder Trim 3M Tape Install ISO 9001 Certified Overview The Range Rover Evoque has always punched above its weight in terms of interior refinement — it's a compact SUV that genuinely feels premium. For 2019 and 2020 model year Evoque owners, the rear cabin experience is just as important as the front, and the smallest details contribute to that sense of quality. The rear cup holder surround, while functional, can look understated compared to the rest of the cabin's character. This matte silver ABS cup holder cover trim from metyoucar is designed specifically to overlay the rear row cup holder bezel on the Range Rover Evoque (2019–2020), as well as the Range Rover Velar (2017–2019). Crafted from high-grade ABS plastic with a satin matte silver finish, it integrates seamlessly with the surrounding trim to create a cohesive, factory-adjacent aesthetic — without the factory price tag. The piece weighs just 29 grams and attaches cleanly via pre-applied 3M adhesive tape on the reverse face. There's no drilling, no permanent modification, and no specialist tools needed. It's the kind of subtle upgrade that you'll notice every time you get in, and that rear passengers will appreciate just as much as you do. What's Included 🪄 Rear Cup Holder Cover Trim ×1 — Matte silver ABS overlay piece, pre-fitted with 3M adhesive 🔲 3M Adhesive Backing Pre-applied to reverse face for clean, residue-free bonding 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-engineered fit for Evoque 2019–2020 rear cup holder surround Also compatible with Range Rover Velar 2017–2019 High-quality ABS plastic construction — durable and lightweight at just 29g Matte silver finish complements Evoque's interior colour palette 3M adhesive backing provides strong, long-lasting bond without drilling Tool-free installation — completed in under 5 minutes ISO 9001 certified manufacturing process for consistent quality No permanent modification to your vehicle's trim or panels Reversible — can be removed cleanly if required Ideal for refreshing worn or scratched original cup holder surrounds Compatibility Vehicle Model Code Year Range Fitment Range Rover Evoque L551 2019 – 2020 Direct Fit Range Rover Velar L560 2017 – 2019 Direct Fit Range Rover Evoque L538 (Mk1) 2011 – 2018 Not Compatible Range Rover Evoque L551 2021 onwards Verify Before Purchase Range Rover Sport L494 2013 – 2022 Not Compatible Land Rover Discovery Sport L550 2015 – 2022 Not Compatible If your model year falls outside the listed range or you're unsure of your vehicle's trim variant, please contact us before ordering — we're happy to confirm fitment. Installation Notes ⏱ Estimated Time: 5 minutes  |  🔧 Difficulty: Beginner  |  🛠 Tools Required: None Ensure the existing rear cup holder surround is clean, dry, and free from dust or grease. Use an alcohol wipe or IPA solution for best adhesion. Test-fit the trim piece over the cup holder surround without removing the 3M backing to confirm alignment and orientation. Once satisfied with positioning, peel the protective film from the 3M adhesive backing on the reverse of the trim piece. Carefully align the trim piece over the cup holder surround and press firmly into place, applying consistent pressure across the full surface for 30–60 seconds. Allow 24 hours for the adhesive to fully cure before subjecting the trim to heavy use or cleaning. ⚠ Note: Avoid fitting in cold temperatures below 10°C as this may reduce initial adhesive effectiveness. Do not use silicone-based cleaners on or near the trim as these can compromise the bond over time. Elevate Your Evoque's Rear Cabin Small details define the premium experience. Browse the full Range Rover Evoque interior accessories collection at Victorious Automotive and build a cabin that reflects how much you care about your vehicle. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Wireless Charging Wireless Car Charger Panel for Range Rover Velar 2017–2019 A factory-style Qi wireless charging panel engineered specifically for the Range Rover Velar, delivering up to 10W fast charging with zero cables and a completely clean finish. Range Rover Velar 2017–2019 Qi Wireless QC 3.0 10W Fast Charge Direct Fit Hidden Wiring Anti-Slip Rubber 3-Coil Design Overview The Range Rover Velar was designed from the outset as a vehicle where form and function exist in complete harmony. Its minimalist interior — stripped of unnecessary clutter and defined by clean horizontal lines — deserves accessories that respect that philosophy. This wireless charging panel was developed with exactly that in mind: a direct-fit replacement tray that slots precisely into the Velar's centre console, as if it were always there. Built to the QC 3.0 standard and equipped with a three-coil Qi layout, this charger eliminates the frustration of charging blind spots. Whether you set your phone down squarely or slightly off-centre, charging initiates immediately. Output flexes automatically between 10W, 7.5W, and 5W depending on your device, ensuring iPhones, Samsung Galaxy handsets, and a wide range of other Qi-enabled smartphones receive the fastest charge their hardware supports. Beneath the surface, a built-in anti-magnetic cooling sheet protects both the charger and your device during extended use, while the anti-slip rubber mat keeps your phone seated firmly even on unmade roads or sharp bends. A subtle colour signal light confirms charging status at a glance — discreet enough to suit the Velar's cabin, but clear enough to be useful. All wiring routes cleanly behind the panel, leaving absolutely no loose cables in sight. What's Included 🔌 Wireless Charging Panel Direct-fit tray for Range Rover Velar 2017–2019 🔧 Wiring Harness Connects to OEM cigarette lighter or USB port 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Anti-Magnetic Sheet Built-in cooling and magnetic interference protection Product Highlights Precision-moulded direct-fit design for Range Rover Velar 2017, 2018 & 2019 Three-coil Qi layout eliminates charging blind spots across the entire pad surface Supports up to 10W fast charging for Samsung, 7.5W for Apple, and 5W universal QC 3.0 standard — intelligent power delivery matched to your device Built-in anti-magnetic cooling sheet for safe, stable long-duration charging Advanced anti-slip rubber mat keeps your device secure at all times Discrete colour signal light confirms charging status without distraction Full hidden wiring — no exposed cables, no compromised centre console aesthetics Original-style OEM appearance — blends seamlessly with Velar interior design Wide operating temperature range: −30°C to +80°C — suitable for all climates Technical Specifications Parameter Specification Process Standard Vehicle / Automotive Grade Input Voltage 9V – 16V DC Power Output 10W / 7.5W / 5W (auto-adaptive) Charging Frequency 110 kHz – 205 kHz Charging Efficiency >70% Operating Temperature −30°C to +80°C Wireless Standard Qi (3-Coil) Quick Charge Standard QC 3.0 Device Compatibility Brand Compatible Models Status Apple iPhone iPhone 8, 8 Plus, X, XS, XS Max, XR Direct Fit Samsung Galaxy S6, S6 Edge, S6 Edge+, S7, S7 Edge, S8, S8+, S9, S9+, S10, S10+, S10e, Note 5, Note 8, Note 9 Direct Fit Google Pixel / Nexus Nexus 4, 5, 6, 7 / Pixel 3, Pixel 3 XL Direct Fit LG G2, G3, G6, G6+, V30, V30s ThinQ Direct Fit Nokia Lumia 820, 830, 920, 925, 928, 929, 930, 1020, 1520 / Nokia 7 Plus, 8 Sirocco Direct Fit Motorola Moto 360, Moto X Pro, Moto Mini, Droid 5 Direct Fit Apple AirPods All generations Not Supported Non-Qi Devices Phones without native wireless charging Requires Receiver Phones without built-in Qi wireless charging can be supported with the addition of a separately purchased wireless receiver adapter. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Ensure your Range Rover Velar is switched off before beginning. Confirm your vehicle is a 2017, 2018 or 2019 model year to verify direct fitment. For straightforward installations, locate the OEM cigarette lighter or USB port beneath the centre console and connect the wiring harness directly — no panel removal required. For a fully concealed hidden-wire installation, carefully remove the centre control tray panel using appropriate trim removal tools to avoid scratching surrounding surfaces. Route the wiring harness to the rear of the cigarette lighter socket and establish a secure connection. Tuck all excess cabling neatly into the cavity. Press the new wireless charging panel firmly into position. The precision-moulded housing should seat flush with the surrounding trim with no gaps or movement. Restore power to the vehicle, place a compatible device on the pad, and confirm the charging signal light illuminates. ⚠ Note: Steps requiring removal of the centre control panel are best carried out by a professional automotive technician to avoid damage to surrounding trim or wiring. Metal objects such as coins, IC cards, or bank cards placed between your phone and the charging surface will interrupt charging. Phone cases up to 4mm thick are generally compatible; thicker cases may reduce charging speed. Explore More Velar Accessories This wireless charging panel is just one of many precision upgrades available for the Range Rover Velar. Browse the full Velar collection at Victorious Automotive to find interior enhancements, protection accessories, and styling upgrades designed specifically for your vehicle. Shop All Range Rover Velar Accessories → Upgrade Your Velar. Zero Compromise. Victorious Automotive supplies premium accessories to Range Rover owners across the world. Every product is selected for quality, fitment accuracy, and respect for your vehicle's original design intent. Shop Range Rover Velar Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and vehicle model references are used for fitment identification purposes only. Vehicle trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Exterior Lighting Range Rover Vogue L405 2013–2020 Rear Tail Light Aftermarket Upgrade — 2018 Facelift Style Give your pre-facelift L405 the refined rear-end aesthetic of the 2018 model year — with a precision-fit pair of aftermarket tail lights built to OEM standards. Range Rover Vogue L405 2013–2020 2018 Facelift Style Rear Tail Lights Left & Right Pair OEM Quality ISO 9001 Certified Direct Fit No Modification Required Overview The Range Rover Vogue L405 is one of Land Rover's most celebrated full-size luxury SUVs — a vehicle that commands presence on every road it travels. Introduced in 2013 and comprehensively refreshed in 2018, the L405 facelift brought with it a distinctly sharper, more sculpted rear light signature that transformed the vehicle's after-dark identity. If your Vogue is a 2013–2017 model, you'll know exactly what we're talking about. These aftermarket rear tail lights are engineered to replicate the 2018 facelift design language in precise detail — giving your earlier L405 a thoroughly modern rear appearance without any structural modification to your vehicle. Every lens, housing contour, and light element has been developed to mirror the factory facelift unit, ensuring the visual upgrade is seamless and convincing from every angle. Built to ISO 9001 certified manufacturing standards with OEM-grade materials, these lights aren't a cosmetic compromise — they're a genuine quality upgrade. Whether you're refreshing an older Vogue for personal satisfaction or preparing it for resale, this is one of the most impactful single changes you can make to the exterior of the L405. What's Included 🔴 Left Rear Tail Light Driver-side unit, 2018 facelift style housing 🔴 Right Rear Tail Light Passenger-side unit, matched facelift design 📦 Protective Packaging Individually secured for safe international transit 🔧 Fitment Hardware Mounting points align with OEM positions Product Highlights Replicates the 2018 L405 facelift rear light design in precise detail ISO 9001 certified manufacturing — quality assured at every stage OEM-grade materials ensure durability across all weather conditions Direct-fit installation — no cutting, drilling, or modification required Supplied as a matched left and right pair for consistent appearance Factory wiring connector compatibility for plug-and-play fitment UV-stabilised lens housing resists yellowing and fading over time Significantly updates the rear-end aesthetic of pre-facelift models Ideal for owners upgrading a 2013–2017 Vogue to facelift specification Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 (Pre-Facelift) Direct Fit Range Rover Vogue L405 2018–2020 (Post-Facelift) Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Intermediate  |  ⏱ Estimated Time: 45–90 Minutes  |  👤 1 Person Required Open the tailgate fully and locate the interior trim panel covering the tail light mounting points on both sides of the boot aperture. Carefully remove the trim panel using a trim removal tool to expose the rear light retaining bolts and wiring connector. Disconnect the factory wiring harness connector from the existing tail light unit — press the release tab firmly before pulling. Remove the retaining bolts (typically 3 per side) and gently pull the original tail light unit away from the body aperture. Align the new facelift-style tail light unit into the aperture, ensuring all mounting studs are correctly seated before applying torque. Reconnect the wiring harness until the connector clicks firmly into place, then refit the retaining bolts and trim panel. Repeat on the opposite side, then test all light functions — stop, indicator, reverse, and running lights — before driving. ⚠ Important: Professional installation is recommended if you are unfamiliar with automotive electrical systems. Always verify that all light functions operate correctly before using the vehicle on public roads. Check local regulations regarding aftermarket lighting compliance in your region prior to installation. Upgrade Your L405 — The Right Way Join over 12,300 Range Rover owners who trust Victorious Automotive for premium, precision-engineered upgrades. Browse the full L405 collection or speak to our team directly. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Paint Care · Ceramic Coating Ceramic Car Coating Liquid Glass — 9H Hardness Nano Hydrophobic Paint Protection, 50ml Professional-grade nano ceramic liquid glass coating that bonds to your vehicle's paintwork, delivering a mirror-like finish with 9H hardness protection that repels water, dirt, UV and contaminants for up to three months. 9H Hardness Nano Hydrophobic 50ml ISO 9001 Certified Polysiloxane Formula Spray Nozzle Included Cars & Motorcycles 1–3 Month Protection Colorless Transparent Cure Why Paint Protection Matters Your Land Rover, Range Rover, or Defender represents a significant investment — and its paintwork is its first line of defence against the elements. Whether you're navigating city streets or tackling rougher terrain, your vehicle's finish is constantly exposed to UV radiation, acid rain, industrial fallout, bird droppings, road grime and fine scratches. Over time, unprotected paint fades, oxidises and loses the depth that makes these vehicles so visually commanding. This Ceramic Car Coating Liquid Glass uses advanced Nano-Hybrid Technology — combining high-performance polysiloxane with inorganic silica components — to form a sacrificial hardened layer directly over your car's clear coat. At 9H hardness, it is the maximum rating on the pencil hardness scale, meaning it provides serious resistance to swirl marks and light abrasion. The result is a surface that sheds water, repels oil, and glows with the kind of mirror-like depth that makes your vehicle look freshly detailed at all times. Formulated for use on painted surfaces — including cars, motorcycles and other painted bodywork — this 50ml bottle is sufficient for a full application on a standard-sized vehicle using the included sponge and dust-free cloth. With a cure that is 100% colorless and transparent, there is absolutely no risk of altering your original paint tone. Reapplication every one to three months keeps your paintwork performing at its best year-round. What's Included 🧴 Liquid Glass Ceramic Coating 50ml — core nano ceramic formula, 9H hardness 🌊 Rain & Water Repel Paint Coating 50ml — optional upgrade (Options 3–5), enhances hydrophobic effect 🧹 Premium Degreasing Agent 50ml — optional upgrade (Options 4–5), removes invisible grease and contaminants 🟡 Applicator Sponge(s) 1–2x depending on option selected 🧽 Dust-Free Cloth(s) 1–4x depending on option selected 💨 Spray Nozzle(s) 1–2x — precision application direct to paint surface 🎁 Microfibre Towels (Option 5 only) 2x — luxury gift box presentation, ideal as a gift Product Highlights Maximum 9H pencil hardness rating for serious swirl and scratch resistance Super hydrophobic and oleophobic surface — water and oil bead and roll off instantly Nano-Hybrid polysiloxane formula bonds chemically to painted surfaces 30-micron coating thickness for measurable, durable protection Mirror-like high gloss finish — restores factory showroom depth 100% colorless transparent cure — no tint, no haze, no alteration to paint colour Broad pH tolerance of PH2–12, resisting acid rain, bird droppings and road fallout Heat resistance up to 760°C — safe near engine bays and hot panels Easy spray nozzle application — no professional equipment required Protection lasts 1–3 months per application on painted bodywork Package Options & Compatibility Option Contents Summary Best For Available Option 1 — Coating Only 1× Liquid Glass 50ml Top-up / reapplication Direct Fit Option 2 — Starter Kit Coating + Sponge + Cloth + Nozzle First-time users Direct Fit Option 3 — Hydro Kit Coating + Water Repel Coating + 2× accessories Maximum water repellency Direct Fit Option 4 — Full Prep Kit Coating + Degreaser + 2× accessories Best coating adhesion result Direct Fit Option 5 — Gift Box Coating + Degreaser + Full accessory set + Microfibre Towels Gift or complete luxury detailing kit Direct Fit Window / Glass Surfaces Not intended for windscreens or windows — Not Recommended Leather / Interior Trim Degreasing agent only for interior use — Coating Not Suitable Vehicle Compatibility Vehicle Years Compatibility Range Rover Vogue L460 2022–2026 Compatible Range Rover Sport L461 2022–2026 Compatible Land Rover Defender L663 2020–2026 Compatible Range Rover Vogue L405 2013–2020 Compatible Range Rover Sport L494 2013–2020 Compatible Range Rover Velar 2018–2022 Compatible Land Rover Discovery 5 All Years Compatible Land Rover Discovery 4 All Years Compatible Land Rover Discovery 3 All Years Compatible Land Rover Discovery Sport All Years Compatible Range Rover Evoque L551 All Years Compatible Range Rover Evoque L538 All Years Compatible Range Rover Sport L320 All Years Compatible Land Rover Defender (Classic) 2004–2016 Compatible Toyota Land Cruiser LC300 All Years Compatible Toyota Land Cruiser LC250 All Years Compatible Mercedes G Class / G-Wagon All Years Compatible Application Instructions Difficulty: Easy  ·  Estimated Time: 45–90 minutes for full vehicle Wash and dry your vehicle thoroughly. Remove all loose dirt, dust and debris before beginning. The surface must be clean and completely dry. Apply the Degreasing Agent first (if included in your kit). Spray onto the panel and wipe with a dust-free cloth to remove invisible grease, wax residue and contaminants. This step ensures maximum coating adhesion and is highly recommended before any ceramic application. Attach the spray nozzle to the Liquid Glass bottle. Shake gently before use. Spray a thin, even layer onto a 40×40cm section of painted surface. Work one panel at a time. Do not over-apply — a light, even mist is sufficient. Using the applicator sponge, spread in small circular motions with light, consistent pressure across the section. Leave to cure for 10 minutes. Do not touch the surface during this window. Buff off with a clean, soft dust-free cloth using light pressure. Turn the cloth regularly to ensure a streak-free, high-gloss finish. Repeat across all painted panels. One 50ml bottle is typically sufficient for a standard-sized vehicle. For enhanced water repellency (Option 3), follow the same process with the Rain & Water Repel Coating after the Liquid Glass has been buffed off. Allow 24 hours before exposing the vehicle to rain or washing. The coating continues to cure and harden over this period. ⚠ Important Notes: This product is formulated exclusively for painted bodywork surfaces. Do not apply to windscreens, windows, rubber seals or unpainted plastic trim. Avoid application in direct sunlight or on a hot surface — work in a shaded area for best results. Wear gloves during application. Effect duration of 1–3 months will vary based on weather conditions, washing frequency and driving environment. Reapplication is recommended every 4–8 weeks for optimal protection. Technical Specifications Specification Detail Brand AUTO CARE — Nano-Hybrid Technology Volume 50ml per bottle Hardness Rating 9H (maximum pencil hardness scale) Coating Thickness 30 microns Material Composition Polysiloxane, high-performance inorganic silica components, lubricants Cure Colour 100% colorless and transparent pH Tolerance PH 2–12 (broad acid and alkali resistance) Heat Resistance Up to 760°C Gloss Excellent high gloss — mirror-like finish Protection Duration 1–3 months per application Surface Compatibility Painted bodywork only (cars and motorcycles) Certification ISO 9001 Dimensions (bottle) 9 × 3 × 9 cm · 110g Keep Your Paint Looking Showroom-Perfect Whether you're protecting a brand-new Range Rover L460, maintaining a well-loved Defender L663, or giving a classic Discovery a new lease of life, this ceramic coating liquid glass delivers professional-grade protection in an easy-to-apply format. Order today and receive worldwide shipping via DHL, FedEx, UPS and TNT — backed by our 30-day money-back guarantee. Shop Paint Protection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), Range Rover, Toyota, Mercedes-Benz or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used solely for fitment identification purposes. This product is a universal paint care product suitable for use on any painted automotive surface and is not manufactured by or exclusively for any vehicle brand.

Victorious Automotive · Land Rover & Jaguar · Key Protection TPU Stellar Sands Key Case Cover — Land Rover & Jaguar Fob Protection with Swarovski-Style Crystal Finish Wrap your Land Rover or Jaguar key fob in a durable, crystal-embellished TPU shell that prevents peeling, cracking, and everyday wear — in three premium colour options. Range Rover Sport Range Rover Evoque Freelander 2 Jaguar XE / XJ / XF TPU Material Crystal Swarovski-Style Back Black · Pink · Silver Direct Slip-On Fit 30-Day Guarantee Overview Land Rover and Jaguar key fobs are precision-engineered pieces of technology — but their OEM plastic housings are notorious for peeling, splitting, and scuffing with regular use. Whether it's a Range Rover Sport, Range Rover Evoque, Freelander 2, or a Jaguar XE, XJ, XJL, or XF, the exposed plastic casing is one of the first things to show its age, often leaving a cracked or delaminated fob that feels far from premium in your hand. The Victorious TPU Stellar Sands Key Case solves this problem elegantly. Constructed from flexible, shock-absorbing thermoplastic polyurethane, this slim-fit cover wraps your existing fob securely, protecting the shell and the electronics within from drops, spills, pocket debris, and daily wear. The Swarovski-style crystal-embellished back panel adds a distinctive, jewel-like finish that elevates the fob's appearance considerably — available in Black, Pink, and Silver to complement your interior aesthetic or personal style. Unlike hard plastic cases that can trap grit and cause further damage, TPU flexes slightly to absorb impact without adding unwanted bulk. All buttons remain fully accessible through precision-cut openings, and the signal range of your remote is completely unaffected. This is the understated upgrade that every Land Rover and Jaguar key deserves. What's Included 🔑 TPU Key Case Cover 1× slip-on protective shell in your chosen colour 💎 Crystal Embellishment Swarovski-style stones pre-applied to rear panel 📦 Protective Packaging Safely packaged for transit and gifting 📋 Fitment Guide Compatible model reference included Product Highlights Flexible TPU construction absorbs drops and daily impacts without cracking Swarovski-style crystal back for a premium, jewel-finished aesthetic Available in Black, Pink, and Silver to suit any preference Precision-cut openings keep all buttons fully functional Slim profile adds minimal bulk while maximising protection Prevents the common OEM plastic peeling and splitting issue Protects internal key electronics from moisture and impact Secure slip-on fit — no adhesive, no permanent modification Compatible across multiple Land Rover and Jaguar fob shapes Fully reversible — remove anytime without leaving any residue Compatibility Vehicle Model / Code Years Fitment Range Rover Sport L320 / L494 2005–2020 Direct Fit Range Rover Evoque L538 2011–2019 Direct Fit Freelander 2 L359 2006–2015 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Jaguar XE X760 2015–2020 Direct Fit Jaguar XJ / XJL X351 2010–2019 Direct Fit Jaguar XF X260 2015–2020 Direct Fit Jaguar C-X16 Concept / Reference — Direct Fit Range Rover Sport L461 New Generation 2022–2026 Verify Fob Shape Range Rover Vogue L460 New Generation 2022–2026 Verify Fob Shape Defender L663 New Generation 2020–2026 Verify Fob Shape Installation Notes Difficulty: Easy  ·  Time: Under 2 Minutes  ·  Tools Required: None Remove your existing key fob from any key ring or lanyard to ensure a clean, unobstructed fit. Hold the TPU case open and align the base of your fob with the bottom edge of the cover, matching the button cutouts to the corresponding controls. Gently press the fob into the case, working from the base upward until the TPU shell seats flush around the entire perimeter. Confirm all buttons depress naturally through their designated openings and the emergency blade slot (if applicable) is correctly aligned. Reattach to your key ring through the designated loop and you're done. Note: Please compare your existing fob shape against the product images before purchasing. Land Rover and Jaguar fob profiles can vary between model years and facelifts. If you are unsure of compatibility, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Protect Your Key. Elevate Every Detail. Your Land Rover or Jaguar deserves care at every touchpoint — including the key in your hand. Browse our full range of premium accessories at Victorious Automotive and keep your vehicle looking and feeling exactly as it should. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Land Rover, Range Rover, Jaguar, or any of their subsidiaries. All brand names, model names, and vehicle references are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Z-ART · Range Rover Evoque L538 · Front Grille Carbon Fibre Front Grille for Range Rover Evoque L538 (2012–2016) A direct-fit, race-inspired carbon fibre front grille that transforms the face of the Evoque with a sharper, more aggressive presence — built to last and precision-matched to the 2012–2016 generation. Range Rover Evoque L538 2012–2016 Carbon Fibre Racing Grille Body Kit Direct Fit UV Resistant 100% Brand New Z-ART Overview The Range Rover Evoque L538 already cuts a distinctive silhouette, but for owners who demand something more purposeful from the front end, the standard grille can feel understated. Whether you're running the original 2.0 Si4 petrol or the 2.2 TD4 diesel, the Evoque's nose is its calling card — and this carbon fibre front grille is designed to make it count. Crafted by Z-ART from high-grade carbon fibre composite, this racing-style front grille delivers genuine material authenticity alongside visual drama. The characteristic woven carbon weave pattern reads clearly at road speed, signalling a level of finish typically reserved for the motorsport paddock. Resistant to UV degradation, water, road salt, mild acids, oils and grease, it's built to hold its appearance through all-season use — not just summer show events. Every unit is gel-coated and individually inspected before despatch, ensuring the surface quality matches the quality of the underlying material. For Evoque owners who take pride in their vehicle's detail, this is the front-end upgrade that rewards closer inspection every time. What's Included 🔲 Carbon Fibre Front Grille Full replacement grille unit, ready to install 🔩 Mounting Hardware OEM-compatible fixings for secure installation 📋 Installation Guide Step-by-step reference included 🛡️ Protective Packaging Foam-lined secure outer packaging Product Highlights Genuine carbon fibre composite construction with visible 2×2 twill weave Direct replacement fit — engineered specifically for Evoque L538 2012–2016 Lightweight material reduces front-end mass versus OEM plastic unit Gel-coated finish for a high-gloss, showroom-ready surface appearance Resistant to UV, water, road salt, grease, oil and mild acid exposure 100% brand new — not reconditioned or refurbished Race-inspired design with aggressive aperture styling Individually inspected and quality-checked before shipping No drilling or permanent modifications required for installation CE certified — meets external testing and quality standards Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 (1st Gen) 2012–2016 Direct Fit Range Rover Evoque L538 (Facelift) 2016–2018 Verify Before Order Range Rover Evoque L551 (2nd Gen) 2019–Present Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible If your Evoque falls within the 2016 facelift window, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering to confirm compatibility with your specific VIN. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal tools, screwdriver set Ensure the vehicle is parked on a flat surface with the engine off and fully cooled before beginning work. Using trim removal tools, carefully disengage the front bumper clips and release the upper grille surround from the lower bumper assembly. Locate and remove all OEM grille retaining screws or push-pin fasteners — typically found along the top edge and lower mounting points. With a second pair of hands, gently pull the factory grille forward and away from the bumper opening, disconnecting any ambient sensor or camera wiring harness clips if present. Offer up the new carbon fibre grille into the aperture and confirm the mounting points align correctly before pressing into position. Reattach all mounting hardware, reconnect any wiring harnesses, and press the surround back into place until all clips seat firmly. Step back and visually inspect alignment from 3–4 metres. Minor adjustments can be made before final tightening. ⚠ Note: If your Evoque is fitted with a front-facing camera or parking sensors integrated into the grille area, ensure all connectors are fully reseated before driving. We recommend a professional installation if you are not confident working around front bumper assemblies. Victorious Automotive accepts no liability for damage arising from improper installation. Upgrade Your Evoque Today Browse our full Range Rover Evoque L538 accessory collection for interior, exterior and protection upgrades — all curated specifically for your generation of Evoque. Shop Evoque L538 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for fitment identification purposes. Z-ART is the manufacturer of this product. Always verify compatibility with your specific vehicle before installation.

Mercedes · V-Class W447 · Exterior Diamond Front Grille for Mercedes V-Class W447 Transform your V-Class with a sophisticated diamond-pattern grille that elevates curb appeal and modern styling presence. W447 V260 / V250 2014–2022 ABS Polymer Direct Fit Overview The Mercedes V-Class W447 commands presence on the road. Built for practicality and understated elegance, it deserves front-end styling that matches that calibre. This diamond-pattern grille replaces the factory fascia with a refined geometric aesthetic that reads modern without breaking character. Engineered from automotive-grade ABS polymer, this grille is constructed to withstand UV exposure, temperature fluctuation, and daily use. The diamond lattice design is clean, symmetrical, and visually distinctive—instantly recognisable from 50 metres. Installation is a straightforward swap of the original grille, no modifications required. Whether you're running a V260 petrol or V250 commercial variant, this grille sits flush with the W447 bumper integration. It's a statement piece that costs far less than a full body kit, yet delivers proportional visual impact. Certified to CE and ISO9001 standards for material consistency and durability. What's Included ⬜ Diamond Grille (W447) One-piece OEM-fit replacement 🔩 Fitting Hardware Stainless fasteners, pre-drilled Product Highlights Diamond geometric pattern for refined, contemporary styling Durable ABS polymer withstands UV and thermal stress Direct-fit replacement—no modification to bumper required Lightweight construction maintains factory balance and handling Easy removal—original grille can be reinstalled if needed CE and ISO9001 certified for material quality assurance Compatible with V260 petrol and V250 diesel variants Professional finish blends seamlessly with W447 bodywork Simple 15-minute installation with standard hand tools Backed by 30-day money-back guarantee Compatibility Chart Model Variant Year Range Compatibility Mercedes V-Class W447 V260 2014–2022 Direct Fit Mercedes V-Class W447 V250 2014–2022 Direct Fit Mercedes V-Class W447 (All other engines) 2014–2022 Direct Fit Mercedes V-Class W246 (older generation) 2011–2014 Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 15 minutes Open the bonnet and locate the three fastening points on the factory grille (upper and side clips). Carefully release the original grille by gently pulling outward on the side tabs—no force needed. Lift the factory grille clear and set aside in a safe location. Position the diamond grille into the opening, ensuring alignment with upper trim and side flanges. Secure using the supplied stainless fasteners into the pre-drilled holes. Hand-tight only—no overtightening. Check that the grille sits flush and evenly spaced from the bumper lip on both sides. Close the bonnet and inspect fitment from 2 metres away; make any final visual adjustments as needed. Note: If your V-Class has factory parking sensors integrated into the grille, confirm removal does not affect sensor alignment. Most W447 units have sensors mounted separately on the bumper beam, not the grille itself. Ready to Upgrade Your V-Class? Transform your Mercedes front end with a grille that signals taste and attention to detail. Premium finish. Simple install. Real impact. Shop Now Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 — 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS 💰 30-day money-back guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes dealership. All product names and vehicle designations are used for compatibility identification only. This product is an aftermarket accessory and is not an OEM Mercedes component.

Victorious Automotive · Mercedes G-Class · Lighting LED Daytime Running Lights for Mercedes G-Class G500, G350, G63, G65 (1990–2017) Iconic G-Wagon styling meets modern LED efficiency—sharper presence on every drive. G-Class 1990–2017 LED DRL Plug & Play Dual Colour Overview The Mercedes G-Class has defined off-road luxury for over three decades. From the original G500 through the high-performance G63 and G65, this icon demands lighting that matches its presence. These LED Daytime Running Lights upgrade your front end with sharper definition, improved visibility, and a thoroughly modern aesthetic that respects the G-Wagon's timeless design language. Engineered with premium materials and certified to rigorous standards, these DRLs blend seamlessly into the G-Class's distinctive fascia. Available in two colour options, they complement both classic and modern interpretations of the platform—whether you're running a 1990s workhorse or a contemporary performance variant. Installation is straightforward on most variants. Enhanced visibility in daylight hours improves safety, while the modern LED profile adds a subtle accent to your G-Class's commanding road presence. A practical upgrade that feels authentic to the vehicle's character. What's Included 💡 LED DRL Pair Complete left & right units, ready to install 📋 Installation Guide Clear instructions for your G-Class variant 🔧 Hardware & Connectors All fixings and electrical connectors included ✓ 30-Day Guarantee Full refund if not satisfied, no questions Product Highlights Dual colour options to suit your G-Class aesthetic Enhanced daytime visibility—safety & style combined Premium material blend (PP + PU + ABS) for durability All-weather performance across temperature extremes CCC certified—meets rigorous testing standards Modern LED efficiency over traditional halogen Lightweight at just 1kg per pair Compact 25cm diameter profile Compatible with 1990–2017 model range Straightforward plug-and-play installation on most variants Compatibility Model Year Range Compatibility Mercedes G-Class G500 1990–2017 Direct Fit Mercedes G-Class G350 2003–2012 Direct Fit Mercedes G-Class G63 2012–2017 Direct Fit Mercedes G-Class G65 2012–2017 Direct Fit Other G-Class variants (pre-1990) Pre-1990 Not Compatible Installation Notes Difficulty Level: Beginner to Intermediate Most G-Class owners can complete installation in 30–60 minutes per side. Basic hand tools and electrical connectors required. Disconnect the negative terminal from your G-Class battery for safety. Remove the existing front bumper or access panel (model-specific). Unplug the factory light connectors and set them aside. Position the new LED DRL units using the supplied brackets and hardware. Secure all fixings and ensure units sit flush with the fascia. Connect the provided electrical connectors to the OEM wiring harness. Reconnect the battery and test both units on low and high beam cycles. Verify alignment and seal any gaps with weatherproofing (optional but recommended). Important: If you're uncomfortable working with electrical systems or removing bumper components, we recommend professional installation by a Mercedes specialist. Many independent workshops can fit these DRLs in under an hour. Ready to Upgrade Your G-Class? These LED Daytime Running Lights are engineered for G-Class owners who refuse to compromise on either aesthetics or quality. Modern presence, proven durability, and hassle-free installation—shipped worldwide and backed by our 30-day guarantee. Shop G-Class Lighting Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket parts supplier. We are not affiliated with Mercedes-Benz, Daimler, or any official Mercedes subsidiary. All vehicle names, logos, and specifications are used for reference purposes only. Always verify fitment with your vehicle's specific year, engine, and transmission variant before purchase. Installation may require professional support; consult your Mercedes dealer or specialist if unsure.

Jaguar · Range Rover Evoque · Interior Upgrades Aluminium Steering Wheel Paddle Shifters – Jaguar XF XE XJ F-Pace X761 & Range Rover Evoque (2012–2018) Direct-fit aluminium alloy paddle shifters engineered for Jaguar and Range Rover Evoque steering columns — delivering sharper gear changes and a genuinely tactile driving experience. Range Rover Evoque L538 Jaguar XF · XE · XJ F-Pace X761 2012–2018 Aluminium Alloy Direct Fit No Drilling Model: 1000-542 SNBLO Overview The Range Rover Evoque and Jaguar XF, XE, XJ, F-Pace, and X-Type share a platform philosophy that has always prioritised driver engagement — and the steering column is one of the most tactile touchpoints in that relationship. If your gear selector paddles feel underwhelming, or if you simply want to elevate the interior with a premium upgrade that's felt every time you drive, these aluminium paddle shifters are built precisely for that purpose. Constructed from precision-machined aluminium alloy, the SNBLO 1000-542 paddle shifters replace the factory-fit plastic extensions with a product that genuinely feels at home in a premium British cabin. The solid weight and cool metallic finish transform every upshift and downshift into something more deliberate, more satisfying — particularly when driven in sport or manual mode. Designed specifically for vehicles produced between 2012 and 2018 across the Jaguar and Range Rover Evoque range, these paddle shifters clip securely over your existing steering wheel paddles without any permanent modification. The result is a factory-clean finish with a material upgrade that punches well above the price point. What's Included 🔧 Left Paddle Shifter (–) Aluminium alloy downshift paddle, pre-fitted clip mount 🔧 Right Paddle Shifter (+) Aluminium alloy upshift paddle, pre-fitted clip mount 📋 Fitting Instructions Basic installation guide included in packaging 📦 Protective Packaging Padded box to prevent transit damage to finish Product Highlights Precision-machined aluminium alloy construction for a premium, durable finish Direct clip-on fitment — no drilling, cutting or permanent modification required Compatible with Jaguar XF, XE, XJ, F-Pace X761, X-Type and Range Rover Evoque Covers vehicles from 2012 through to 2018 model years Solid tactile feel that replaces lightweight OEM plastic paddles instantly Subtle, factory-integrated aesthetic that doesn't look aftermarket Lightweight at 300g total — no impact on steering balance or wheel feel Low-profile design at 1cm height, 3cm width, 18cm length for seamless integration Available in polished and brushed aluminium finishes for interior colour matching Straightforward DIY installation achievable in under 15 minutes Compatibility Vehicle Code / Generation Years Fitment Range Rover Evoque L538 2012–2018 Direct Fit Jaguar XF X250 / X260 2012–2018 Direct Fit Jaguar XE X760 2015–2018 Direct Fit Jaguar XJ X351 2012–2018 Direct Fit Jaguar F-Pace X761 2016–2018 Direct Fit Jaguar X-Type X400 2012–2016 Direct Fit Range Rover Evoque L551 (2019+) 2019–2026 Verify Before Purchase Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes ⚙️ Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Park your vehicle on a flat surface with the engine off and the steering wheel in its neutral, centred position. Locate the existing factory paddle shifters behind the steering wheel — these will be the left (–) and right (+) paddles. Take the aluminium paddle shifter and align the integrated clip mount with the rear edge of the corresponding factory paddle. Press the aluminium paddle firmly onto the factory paddle, ensuring the clip engages securely and the paddle sits flush against the wheel spoke. Repeat for the second paddle on the opposite side, ensuring both paddles are symmetrically aligned. Test each paddle for secure fitment by pressing gently — there should be no flex, rattle or movement once correctly seated. Start the vehicle and test gear changes in manual or sport mode to confirm full functionality. ⚠ Important: These paddle shifters are designed to clip over existing OEM paddles and do not replace the underlying electrical mechanism. If your factory steering wheel does not include paddle shifters as standard, this product will not add that functionality. Always confirm your vehicle specification before ordering. Upgrade Your Drive with Victorious Automotive Trusted by over 12,300 owners across the UK and worldwide, Victorious Automotive supplies premium accessories built to complement the vehicles that deserve nothing less. Every order ships globally via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification prior to purchase.

Jaguar Accessories · Steering Wheel · Interior Styling Steering Wheel Ring Decals for Jaguar XF, XE, F-PACE & F-TYPE Premium aluminum steering wheel badge decals with precision color-change design—elevate your cabin with OEM-inspired luxury styling. Jaguar OEM Design 2010–2026 Aluminum Alloy Color Change Finish Internal Mount DSYCAR Brand Overview Jaguar drivers demand refinement—from the moment your hands meet the wheel. These steering wheel ring decals bring factory-inspired elegance to your XF, XE, F-PACE, or F-TYPE, replacing the stock emblem with a precision-engineered aluminum piece that catches light and complements your interior in ways the original simply cannot. Crafted from premium zinc alloy with a sophisticated color-change finish, these decals deliver visual depth and modern luxury appeal. Whether you're upgrading a 2010-era XF or a current-generation F-TYPE, this detail transforms your driving experience every single time you grip the wheel. Installation is straightforward—no modifications required. These are designed as OEM-specification replacements for internal steering wheel badge mounting, so they integrate seamlessly with your vehicle's existing geometry and design language. What's Included 🎯 Steering Wheel Decal Premium aluminum ring emblem with color-change coating ✓ OEM-Spec Design Engineered to factory dimensions and mounting points 📦 Unpackaged Arrives ready to install—minimal packaging to reduce waste ⚡ Customized Finish Color-change treatment visible in varied lighting conditions Product Highlights Premium zinc alloy construction for durability and weight distribution Color-change finish reveals different hues depending on light angle and intensity OEM-specification replacement—no modification to steering wheel required Precision-engineered to Jaguar factory tolerances and mounting geometry Compatible with XF, XE, F-PACE, and F-TYPE across multiple generations Internal mounting—protected from weather and road debris exposure Creative sticker category design—balances form and function seamlessly DSYCAR brand engineering—trusted by Jaguar enthusiasts worldwide Transforms cabin ambiance without affecting steering feel or ergonomics Subtle luxury upgrade that reflects your attention to detail Compatibility Jaguar Model Years Fitment XF 2010–2026 Direct Fit XE 2015–2026 Direct Fit F-PACE 2015–2026 Direct Fit F-TYPE 2013–2026 Direct Fit Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Remove the steering wheel (or access via wheel removal if your model allows badge replacement without full wheel removal) Gently prise the existing emblem or decal from the steering wheel ring using a soft plastic tool Clean the mounting surface with a lint-free cloth and mild alcohol solution Allow surface to dry completely Position the new aluminum decal, aligning with mounting points or adhesive guides Apply firm, even pressure for 10–15 seconds to ensure full adhesion Allow 24 hours before first drive to ensure complete cure Note: If your Jaguar requires full steering wheel removal, consult your owner's manual or a qualified technician. Do not attempt removal if you are unfamiliar with steering column safety procedures. Internal airbag systems require careful handling. Complete Your Interior Upgrade These steering wheel decals are the detail your Jaguar deserves—a subtle but unmistakable mark of craftsmanship every time you drive. Pair with other interior accents to elevate your cabin further. Shop Jaguar Accessories Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ 4.9★ · 12,300+ reviews ✓ Worldwide shipping via DHL & FedEx ✓ Mon–Fri 9am–7pm UK support Disclaimer: Victorious Automotive is not affiliated with Jaguar Land Rover plc or any official Jaguar brand entity. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for aftermarket personalization only.

Victorious · Mercedes-Benz · Exhaust Covers AMG Quad Pipe Exhaust Cover for Mercedes-Benz GLC, A, B, C, E-Class (2016–2017) Premium stainless steel exhaust trim that elevates your Mercedes aesthetic with a sporty, high-performance finish. GLC W205 W213 W176 W246 2016–2017 304 Stainless Steel Quad Pipe Design Tape Install Overview Designed for Mercedes-Benz owners who demand visual authenticity without compromise, this AMG exhaust cover transforms the rear end of your C-Class W205 Coupe, GLC Class, B-Class W246, E-Class W213 Coupe, and A-Class W176 into a statement of refined sportiness. The quad-pipe aesthetic mimics high-spec AMG models, giving your vehicle an instantly elevated presence. Engineered from marine-grade 304 stainless steel, this cover delivers the durability and mirror finish expected in premium automotive accessories. Available in shiny silver or gloss black, it integrates seamlessly with your Mercedes' design language while resisting salt spray, UV exposure, and weathering. Installation is refreshingly straightforward—automotive-grade double-sided adhesive tape eliminates the need for tools, welding, or professional fitting. Most owners complete the job in under 15 minutes per side. What's Included 📦 Exhaust Covers (Pair) 2× stainless steel quad-pipe covers 🧴 Adhesive Tape (Pre-Applied) Automotive-grade double-sided tape 📋 Fitting Guide Step-by-step installation instructions ✓ Quality Assurance Pre-fit tested on your vehicle model Product Highlights 304 stainless steel construction for superior corrosion resistance Available in shiny silver and gloss black finishes Thicker gauge material for authentic proportional appeal Pre-applied automotive-grade adhesive tape No tools, welding, or drilling required Fits factory exhaust pipes precisely Mirrors OEM AMG quad-pipe styling Weather-resistant and salt-spray tested 30-day money-back guarantee on all purchases Comprehensive vehicle compatibility support Compatibility Model Code Years Fit C-Class Coupe W205 2015–2017 Direct Fit GLC Class C253 2016–2017 Direct Fit B-Class W246 2015–2016 Direct Fit E-Class Coupe W213 2014–2017 Direct Fit A-Class W176 2016–2017 Direct Fit Installation Notes Difficulty: Beginner | Time: 15 minutes per side Clean and dry the exhaust pipe surface thoroughly with a microfiber cloth and isopropyl alcohol. Remove the protective backing from the pre-applied adhesive tape on the exhaust cover. Carefully position the cover over the exhaust pipe, aligning it with the factory outlet. Press firmly and evenly across the entire surface for 20 seconds to ensure full adhesion. Allow 24 hours of cure time before exposure to heat or high speeds. Repeat steps 1–5 for the second cover. Important: Allow the exhaust system to cool completely before installation. Wet or contaminated exhaust pipes will compromise adhesive performance. Do not install on vehicles exceeding factory exhaust temperatures. Elevate Your Mercedes Styling Join thousands of discerning Mercedes owners who've transformed their rear fascia with premium quad-pipe exhaust covers. Authentic AMG looks, professional finishing, backed by Victorious Automotive's 30-day guarantee. View Current Stock Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL 📞 +44 203 943 9919 ↩️ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official OEM entity. Product compatibility is based on published factory specifications. Always verify fitment before purchase. Improper installation may void vehicle warranty; consult your dealership if unsure.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Range Rover Vogue 2018–2020 Full Autobiography Exterior Pack (L405) Transform your L405 Vogue into a full Autobiography-specification presence with this precision-fitted five-piece exterior styling pack — finished in gloss black and silver. L405 Vogue 2018–2020 Autobiography Style ABS Construction Black + Silver Finish 5-Piece Kit No Drilling Required Direct Fit Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs ever built — a vehicle that carries its presence with quiet authority. From its 2018 facelift through to the final 2020 production year, the L405 platform refined an already exceptional formula, and for owners who want their exterior specification to reflect the pinnacle Autobiography grade, this exterior pack delivers exactly that. This Full Autobiography Exterior Pack is engineered as a complete five-piece styling upgrade that mirrors the visual language of the factory Autobiography trim. The kit covers the front grille surround, mesh side vents, side grille inserts, and rear door trim moulding — five carefully considered components that together create a cohesive, elevated look across the vehicle's exterior. The dual-tone black and silver finish complements both lighter and darker factory body colours with equal effect. Constructed from high-grade ABS — the same class of material used in OEM exterior trim — each piece is moulded to match factory panel lines with precision. The result is a finish that reads as factory-fitted rather than aftermarket, which is exactly what the most discerning Range Rover owners expect. Installation requires no drilling or permanent modification, making this one of the most impactful and reversible exterior upgrades available for the 2018–2020 L405. What's Included 🔲 Front Grille Surround Autobiography-style gloss black and silver finish 🔳 Mesh Side Vents Precision-cut mesh inserts, left and right ▪️ Side Grille Inserts Replaces standard side grille trim pieces 🚪 Rear Door Trim Moulding Kit Completes the Autobiography exterior look at the rear 📦 Fitting Hardware All necessary clips and adhesive included Product Highlights Replicates factory Autobiography exterior specification High-grade ABS construction for durability and rigidity Gloss black and silver dual-tone finish throughout Five-piece complete kit — front, sides, and rear covered No drilling or permanent modification required Direct panel-line fitment for an OEM-quality appearance Brand new — supplied in original packaging Resistant to UV fading and standard road conditions Compatible with both standard and long-wheelbase L405 Reversible installation — original trim fully restorable Compatibility Vehicle Year Range Trim Grade Fitment Range Rover Vogue L405 2018–2020 Vogue / SE / HSE Direct Fit Range Rover Vogue L405 2018–2020 Autobiography (factory) Not Required Range Rover Vogue L405 2013–2017 (Pre-facelift) All Grades Not Compatible Range Rover Sport L494 2013–2022 All Grades Not Compatible Range Rover Vogue L460 2022–2026 All Grades Not Compatible Range Rover Velar 2018–2022 All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tool, clean microfibre cloth Thoroughly clean all exterior trim areas where the new pieces will be fitted. Remove any wax, grease, or polish residue using an isopropyl alcohol wipe to ensure strong adhesion. Using a plastic trim removal tool, carefully unclip and remove the existing front grille surround trim from the vehicle. Work gently from each corner inward to avoid stressing the factory clips. Align the new Autobiography-style front grille surround and press firmly into the factory clip positions until all retention points are fully seated and flush. Remove the existing mesh side vent covers from both the driver and passenger sides. Fit the new mesh vent inserts by aligning the tabs and pressing into place — no adhesive required for these pieces. Replace the side grille inserts by unclipping the originals and snapping the new inserts into position. Check alignment against the body panel before applying full pressure. Fit the rear door trim moulding kit by peeling the protective backing from the adhesive strip, aligning carefully with the existing factory trim line, and pressing firmly across the full length for 30 seconds to ensure bonding. Step back and visually inspect all five pieces for alignment and fitment. Apply light pressure to any panel that does not sit fully flush. ⚠ Important: This kit is designed exclusively for the 2018–2020 L405 Range Rover Vogue post-facelift. Attempting to fit this pack to pre-facelift or alternative models may result in poor fitment. Always confirm your vehicle's production year before installation. Fitting in temperatures below 10°C may reduce adhesive performance — allow the vehicle to warm in a garage before fitting if necessary. Elevate Your L405 to Autobiography Standard For 2018–2020 Range Rover Vogue owners, this is one of the most complete and visually impactful exterior upgrades available. Browse our full L405 collection for complementary interior and exterior accessories. Shop All L405 Vogue Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling 5-Piece Black Front Bumper Hood Centre Grille with Air Vents — Range Rover Vogue L405 (2014–2016) A precisely engineered, full front-end grille kit that delivers a bold, cohesive aesthetic upgrade to your Range Rover Vogue L405 — with integrated air vents to maintain optimal airflow at every speed. Range Rover Vogue L405 2014–2016 ABS Material Gloss Black 5-Piece Kit Integrated Air Vents Direct Replacement No Drilling Required Overview The Range Rover Vogue L405 — produced between 2013 and 2020 — is one of the most recognisable luxury SUVs on the road. Its commanding proportions and precisely sculpted front end set expectations high from the first glance. For owners of the 2014 to 2016 model year, the factory front grille and air vent arrangement, while refined, can benefit from a more assertive, purposeful appearance — particularly as the wider Range Rover design language has continued to evolve. This 5-piece Black Front Bumper Hood Centre Grille with Air Vents Kit is engineered specifically for the L405 Vogue. The centre grille and four matching air vents are crafted from high-grade ABS thermoplastic and finished in a deep gloss black — a finish that reads as intentional and factory-level in its execution. The Transformers-inspired design adds structured geometry to the front fascia without compromising the vehicle's inherent elegance. Each piece in this kit is shaped to the contours of the 2014–2016 L405 front bumper, meaning fitment is clean and alignment is consistent. The integrated air vents are not merely decorative — they maintain the functional purpose of the original openings, ensuring your engine and braking systems continue to receive adequate cooling airflow. This is an upgrade that respects the engineering of your vehicle while elevating what the eye first encounters. What's Included 🔲 Front Hood Centre Grille 1x gloss black ABS grille panel — main centrepiece of the kit 🌬️ Bumper Air Vents 4x matching black ABS air vents for left, right, upper and lower positions 🔩 Mounting Hardware Clip and fixing hardware for secure, rattle-free fitment 📄 Fitment Guide Reference instructions to assist with correct alignment during installation Product Highlights Engineered exclusively for Range Rover Vogue L405 2014–2016 — no universal fitment compromises High-grade ABS thermoplastic construction — resistant to UV degradation, moisture and road debris Deep gloss black finish — consistent sheen that holds up over time without peeling or fading Integrated air vents maintain active airflow — no compromise on engine bay or brake cooling Transformers-inspired geometry adds structural drama to the front fascia Direct replacement fitment — mounts to OEM fixing points without drilling or cutting Lightweight ABS construction — no added load on front bumper support structure Complete 5-piece coordinated kit — no mixing of finishes or sourcing individual pieces separately Enhances visual continuity between the bonnet, bumper and lower fascia Pairs cleanly with other black exterior trim upgrades for a cohesive front-end transformation Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2016 Direct Fit Range Rover Vogue L405 2013 Verify Before Purchase Range Rover Vogue L405 2017–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Trim removal tools, flathead screwdriver, clean microfibre cloths Ensure the vehicle is parked on a flat, stable surface with the engine fully cooled. Disconnect the battery if your bumper features integrated sensors or lighting. Using a trim removal tool, carefully unclip the existing front centre grille from the bumper assembly. Work methodically from the outer edges inward to avoid cracking the surrounding trim. Remove each of the four factory air vents using the same technique — note the orientation of each vent before removal to ensure the replacements are seated correctly. Clean all mounting channels and recesses with a microfibre cloth to remove dust and debris before fitting new components. Begin with the centre grille — align to the OEM fixing points and press firmly until each clip engages with an audible click. Do not force; if resistance is felt, recheck alignment. Fit each of the four air vents in turn, ensuring flush alignment with the surrounding bumper surface. Check from the front of the vehicle to confirm even gaps on all sides. Reconnect the battery if disconnected. Step back and inspect the completed fitment from distance to confirm visual alignment across all five pieces. Note: Professional installation is recommended if you are unfamiliar with trim removal on the L405 platform. Forcing clips or misaligning panels can cause stress fractures to the bumper surround. If your vehicle is fitted with front parking sensors or active grille shutters, consult a qualified technician before proceeding. Upgrade Your Range Rover Vogue Explore the full range of exterior styling accessories for the Range Rover Vogue L405 — from bonnet trim to side vents and beyond. Every piece is selected to meet the standards your vehicle was built to. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Evoque · Exterior Trim Exterior Hood Air Vent Outlet Wing Trim for Land Rover Range Rover Evoque (2012–2018) Protect and elevate your Evoque's bonnet air vents with a precision-fit ABS chrome trim pair that adds a factory-finished, upscale aesthetic in minutes — no tools required. Range Rover Evoque L538 2012–2018 ABS Chrome Plastic Self-Adhesive Fit 1 Pair – 2 Pieces Black & Silver / All Black CCC Certified Exterior Trim Overview The Range Rover Evoque L538 is a vehicle that wears its design credentials proudly — compact yet assertive, every exterior detail contributes to the overall character of the car. The hood air vent outlets on the Evoque's bonnet are a defining design element, but over time, exposure to UV, road debris, and everyday wear can leave them looking scuffed, discoloured, or simply underwhelming against an otherwise well-maintained exterior. These Hood Air Vent Outlet Wing Trims are purpose-designed to sit cleanly over the existing vent apertures, providing a layer of protective coverage while simultaneously upgrading the visual presence of the bonnet. Crafted from high-grade ABS plastic with a chrome finish, the trims deliver a polished, premium look that complements the Evoque's signature styling without looking aftermarket or out of place. The self-adhesive mounting system means installation is genuinely straightforward — no drilling, no brackets, no risk of damaging your paintwork. Whether you choose the dual-tone Black & Silver finish for a refined contrast effect, or the all-Black option for a stealthier, more understated look, both variants are built to last through British weather and beyond. What's Included 🔲 Hood Air Vent Wing Trims 1 Pair (2 pieces) — left & right matched set 🔧 Pre-Applied Adhesive Tape 3M-style self-adhesive backing pre-fitted to each trim 📐 Fitment: Left & Right Mirror-matched pair for symmetrical installation Product Highlights Precision-engineered to match the Evoque L538 bonnet vent profile exactly High-grade ABS plastic — lightweight, impact-resistant, and rust-proof Chrome finish adds a factory-luxury aesthetic to the bonnet vents Shields vent surfaces from scratches, chips, and environmental grime Self-adhesive backing for a clean, tool-free installation No drilling, cutting, or modification to your vehicle required Available in Black & Silver or all-Black to suit your colour scheme UV-resistant finish — won't fade or discolour in direct sunlight CCC externally tested and certified for quality assurance Compatible across a wide range of Land Rover models and year spans Compatibility Vehicle Years Fitment Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Vogue L405 2013–2018 Direct Fit Range Rover Sport L494 2014–2018 Direct Fit Land Rover Discovery 4 2010–2016 Direct Fit Land Rover Freelander 2 2007–2014 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2025 Not Compatible Range Rover Sport L461 (3rd Gen) 2022–2026 Not Compatible Range Rover Vogue L460 (5th Gen) 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your specific build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔩 Tools Required: None Clean the surface: Thoroughly clean the bonnet vent area using an isopropyl alcohol wipe or panel wipe solution. Remove all grease, wax, and residue, then allow to dry completely for a minimum of 5 minutes. Test fit before committing: Hold each trim piece in position over the corresponding vent outlet without removing the adhesive backing. Confirm alignment and orientation before proceeding. Warm the adhesive: In cooler weather, gently warm the adhesive backing with a heat gun or hairdryer on a low setting for 10–15 seconds. This improves initial bond strength significantly. Peel and position: Remove the adhesive backing from one trim piece, carefully align it to the vent outlet, and press firmly into place starting from the centre outward to eliminate air pockets. Apply firm pressure: Hold firm, even pressure across the entire trim surface for at least 30 seconds per piece to ensure full adhesive contact. Repeat for the second trim: Follow the same process for the opposite side, ensuring symmetrical placement. Cure time: Allow 24 hours before washing the vehicle or exposing the trim to heavy rain to allow the adhesive bond to fully cure. ⚠ Note: Do not attempt installation in temperatures below 10°C without pre-warming the adhesive. Cold conditions significantly reduce initial adhesion and may result in the trim lifting at the edges. Ensure the bonnet surface is completely dry before application. Shop by Vehicle Looking for more accessories for your Land Rover or Range Rover? Browse our dedicated vehicle collections below: 🚙 Range Rover Evoque L538 2012–2018 accessories 🚙 Range Rover Evoque L551 2019–2025 accessories 🚙 Range Rover Vogue L405 2013–2020 accessories 🚙 Range Rover Sport L494 2013–2020 accessories 🚙 Land Rover Discovery 4 2010–2016 accessories 🚙 Land Rover Discovery 5 2017–2023 accessories Built for Land Rover Owners Who Don't Compromise At Victorious Automotive, every product we stock is selected to meet the standards your vehicle deserves. Free worldwide shipping, a 30-day money-back guarantee, and 12,300+ verified five-star reviews speak for themselves. Shop All Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Product images are representative; slight variations in finish may occur between production batches.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Silver & Gold Crystal Door Speaker Cover Trim — Range Rover Sport L494 2014–2015 Transform your Sport's interior door panels with precision-fit crystal-embellished speaker cover trims, available in polished silver and gold finishes for an elevated cabin presence. Range Rover Sport L494 2014–2015 Chrome Base Crystal Accents Silver & Gold Adhesive Fit Interior Trim No Drilling Required Overview The Range Rover Sport L494 arrived with one of the most driver-focused interiors Land Rover had produced — a cockpit-style cabin defined by its layered trim surfaces, sculpted door cards, and carefully considered detailing. For owners of the 2014 and 2015 model years, the speaker grilles integrated into the door panels represent one of the most visible interior touchpoints, and one that responds exceptionally well to considered upgrades. These door speaker cover trims are designed as a direct-fit enhancement for the L494 Sport, featuring a chrome base adorned with hand-placed crystal embellishments that catch and reflect light with every journey. Available in two distinct finish options — refined silver and warm gold — they allow owners to complement the existing interior palette, whether that's the cooler, contemporary feel of an Ebony or Ivory cabin or the richer tones of a Tan or Espresso interior. Installation requires no tools, no drilling, and no modifications to your vehicle's door cards. Pre-applied adhesive tape seats each cover securely over the existing grille, delivering a factory-quality result in under two minutes. It's the kind of detail that quietly elevates the whole cabin without announcing itself — precisely the approach Range Rover interiors reward. What's Included 🔷 Door Speaker Cover Trims × 2 One pair — fits both front door speaker grilles 🩹 Pre-Applied Adhesive Tape Industrial-grade 3M-style tape pre-fitted to each cover 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-fit design engineered for the L494 Range Rover Sport door panels Crystal embellishments add a jewellery-grade detail to the interior Available in polished silver and warm gold chrome finishes Chrome base construction for a durable, premium surface quality Pre-applied adhesive tape for a clean, tool-free installation No drilling, cutting, or door card removal required Installs in under two minutes per cover Reversible fitment — removes cleanly without residue damage Compatible with both left and right-hand drive Sport variants Complements factory interior colour palettes across all 2014–2015 trim grades Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2014–2015 Direct Fit Range Rover Sport L494 2013 Verify Before Purchase Range Rover Sport L494 2016–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  |  🔧 Difficulty: Very Easy  |  🛠 Tools Required: None Ensure the door panel surface around the speaker grille is clean, dry, and free from dust, oils, or wax residue. A quick wipe with isopropyl alcohol ensures maximum adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse of each speaker cover trim. Align the trim over the existing speaker grille, taking care to centre the cover accurately before making contact with the panel surface. Press firmly and evenly around the perimeter of the trim for 20–30 seconds to activate the adhesive bond. Repeat for the second door. Allow 30–60 minutes before exposing to moisture or temperature extremes for a full cure. ⚠ Note: Please confirm your exact vehicle model year before purchasing. Door panel grille profiles may vary between early and late L494 production runs. If you are unsure of compatibility, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Complete the Detail These speaker trims are one part of a wider interior upgrade story for the L494 Sport. Explore our full Range Rover Sport L494 collection for complementary trim pieces, gear selector surrounds, and dashboard accents — all designed to work together. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.