Key Covers

Victorious Automotive · Range Rover Evoque · Interior Trim Aluminum Alloy Tweeter Speaker Cover Trim – Range Rover Evoque L551 2020 A precision-matched set of two aluminium alloy tweeter speaker covers designed to replace the factory trim on the 2020 Range Rover Evoque L551, delivering a cleaner, more premium cabin finish with zero modification required. Evoque L551 2020 Aluminum Alloy ABS Chrome Interior Trim Tweeter Speaker Cover Set of 2 No Drilling Direct Fit Overview The Range Rover Evoque L551 is one of Land Rover's most design-conscious offerings — a compact luxury SUV that balances bold exterior styling with a refined, detail-led cabin. Owners who spend time inside the Evoque know that the interior details matter, and the factory tweeter speaker surrounds, while functional, can look understated compared to the quality of the rest of the trim. These aluminium alloy tweeter speaker cover trims are engineered specifically for the 2020 Range Rover Evoque, replacing the original surrounds with a more premium-looking finish that incorporates chrome-effect ABS detailing alongside the alloy construction. The result is a subtle but effective cabin upgrade that visually elevates the door or dashboard speaker area without disrupting the Evoque's clean interior design language. Supplied as a matched pair, these covers clip securely into the factory speaker positions using existing mounting points — no adhesives, no drilling, no permanent modification. For Evoque owners who appreciate the finer points of interior presentation, this is one of the most impactful and affordable upgrades available. What's Included 🔊 Tweeter Speaker Cover × 2 Left and right matched pair, aluminium alloy with chrome ABS finish 📦 Protective Packaging Securely packed to prevent transit damage 🔧 Fitting Hardware Clips and retention elements pre-fitted for direct installation Product Highlights Precision engineered for the 2020 Range Rover Evoque L551 High-grade aluminium alloy construction for lasting durability Chrome-effect ABS detailing for a premium OEM-plus appearance Supplied as a matched left and right pair Direct-fit design — uses existing factory mounting points No drilling, cutting, or permanent modification required Enhances the cabin's visual quality without altering acoustics Resistant to fading, cracking, and UV discolouration Simple clip-fit installation achievable in under 15 minutes Compatible with both standard and upgraded tweeter configurations Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 Direct Fit Range Rover Evoque L551 2019 (Pre-facelift) Verify Before Purchase Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery Sport L550 2020+ Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure the vehicle interior is clean and at ambient temperature before beginning installation. Locate the existing factory tweeter speaker covers on the door panel or dashboard — gently apply pressure to the outer edge to release the factory clips. Carefully remove the original covers without applying excessive force; a trim removal tool can be used if preferred to avoid any surface marking. Align the new aluminium alloy cover trim over the tweeter speaker housing, ensuring all clip points are correctly seated. Apply firm, even pressure across the cover until all clips engage and the trim sits flush with the surrounding panel. Repeat for the second cover on the opposite side, then inspect both fittings to confirm a secure, rattle-free installation. Note: Confirm your exact Evoque build year and trim level prior to ordering. The 2020 L551 model year is the confirmed direct fit — earlier L551 production vehicles (late 2018–2019) may differ in speaker housing dimensions. If in doubt, contact us at +44 203 943 9919 before purchasing. Elevate Every Detail Inside Your Evoque The interior of the Range Rover Evoque deserves the same attention to detail as its exterior. Browse the full range of Evoque L551 accessories at Victorious Automotive and save 20% when you pick up any two items together. Shop Range Rover Evoque L551 Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Carbon Fiber Door Handle Trim Set – Range Rover Evoque L551 (2019–2020) Elevate every touch point inside your Evoque with a precision-cut real carbon fiber door handle trim set, engineered exclusively for the 2019–2020 L551 generation. Evoque L551 2019–2020 Real Carbon Fiber Interior Trim 3D Vinyl Fit Direct Adhesive Install LLK2345 No Drilling Required Overview The second-generation Range Rover Evoque L551 represents a confident step forward in compact luxury SUV design — a vehicle that rewards attention to detail inside and out. Its interior carries refined lines and considered surfaces, making it the ideal canvas for subtle, high-quality upgrades that feel factory-intentional rather than aftermarket. This Carbon Fiber Door Handle Trim Set is purpose-designed for the 2019–2020 Evoque L551, wrapping each internal door handle recess in genuine carbon fiber with 3D-moulded precision. The result is a tactile and visual upgrade that integrates with the Evoque's existing interior architecture rather than competing with it — adding a quiet sporting edge without altering the vehicle's character. Unlike generic peel-and-stick trim pieces, this set uses automotive-grade adhesive tape and precision 3D vinyl profiling to ensure the carbon sits flush against contoured surfaces with no lifting, bubbling, or misalignment. For Evoque owners who appreciate their vehicle's design and want to refine it further, this is the kind of upgrade that makes every drive feel a little more considered. What's Included 🪟 Carbon Fiber Door Handle Trims Full set covering all interior door handle recesses 🔲 Pre-Applied Adhesive Tape Automotive-grade, pre-fitted to each trim piece 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Genuine carbon fiber construction with authentic woven weave pattern 3D vinyl profiling ensures flush fit on contoured L551 door surfaces Automotive-grade adhesive tape for long-term, rattle-free retention No drilling, cutting, or specialist tools required for installation Precision-cut to match the exact geometry of the 2019–2020 Evoque L551 Adds a subtle sporting character without overpowering the interior Resistant to daily wear, UV discolouration, and temperature cycling Compatible with all trim levels of the L551 Evoque generation Lightweight addition — no impact on door mechanism or operation Pairs naturally with other carbon fiber or dark interior accent upgrades Compatibility Vehicle Model Code Year Range Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 (Mk1) 2011–2018 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 minutes  ·  🔧 Tools Required: None Begin with the vehicle parked in a clean, dry environment at room temperature. Ensure the interior door panels are free from dust, grease, and moisture. Use an isopropyl alcohol wipe to thoroughly clean each door handle recess area and allow to dry completely — this is the single most important step for long-term adhesion. Dry-fit each trim piece to its corresponding door position before committing, confirming alignment and orientation against the handle recess profile. Peel the protective backing from the adhesive tape on the first trim piece. Carefully position it against the door handle recess, starting from one edge and pressing progressively across the surface. Apply firm, even pressure across the entire face of the trim for 30–60 seconds to fully activate the adhesive bond. Repeat for all remaining trim pieces, working methodically around the vehicle. Allow at least 24 hours before subjecting the trims to heavy use or moisture. ⚠ Important: Do not attempt installation on cold or damp surfaces — adhesive performance is significantly reduced below 15°C. Avoid washing the vehicle interior for 48 hours post-installation to allow the bond to fully cure. These trims are designed specifically for the L551 Evoque and may not align correctly on any other model. Specifications Specification Detail Material Real Carbon Fiber Finish 3D Vinyl Profiled Weave Placement Internal Door Handle Recesses Item Length 20 cm Item Height 10 cm Item Width 5 cm Adhesive Type Automotive-Grade Double-Sided Tape Model Reference LLK2345 Fitment 2019–2020 Range Rover Evoque L551 Refined by Detail. Built for the Evoque. Every surface you touch inside your Evoque is an opportunity to elevate the experience. This carbon fiber door handle trim set is a small change that makes a considered impression — exactly the kind of upgrade Victorious is built around. Shop More Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Chrome ABS Water Cup Holder Panel Trim for Range Rover Evoque L551 (2019–2020) A precision-fit chrome accent panel that instantly elevates the cup holder surround of your second-generation Evoque with a refined, factory-quality finish. Evoque L551 2019–2020 ABS Chrome Interior Trim Cup Holder Panel No-Drill Fit Silver Finish ISO9001 Certified Overview The second-generation Range Rover Evoque (L551) set a new benchmark for compact luxury SUVs when it arrived in 2019, introducing a more sophisticated interior architecture with cleaner lines and premium material choices throughout the cabin. It's a vehicle that rewards attention to detail — and the cup holder surround is one of those small areas where aftermarket refinement genuinely makes a difference to the perceived quality of the interior environment. This Chrome ABS Cup Holder Panel Trim is engineered specifically for the 2019–2020 Evoque L551. Manufactured from high-grade ABS with a durable chrome-effect surface treatment, it sits flush over the existing cup holder panel, adding a polished silver accent that complements the Evoque's interior trim lines. The result is a cohesion between centre console elements that feels deliberate and premium rather than afterthought. Installation requires no drilling, no cutting, and no specialist tools. The panel is secured using pre-applied automotive-grade adhesive tape, making it a clean and reversible upgrade that any Evoque owner can complete at home in a matter of minutes. For drivers who care about the details of their interior — this is exactly the kind of finishing touch that makes a difference every time you reach for a drink. What's Included ✦ Cup Holder Panel Trim 1× ABS Chrome decoration panel — pre-cut to fit L551 Evoque 🔲 Adhesive Tape Pre-applied automotive-grade 3M-style double-sided tape 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered for Range Rover Evoque L551 (2019–2020) High-grade ABS construction — impact resistant and lightweight Polished chrome-effect silver finish for a premium aesthetic No drilling, cutting, or modification required Pre-applied automotive adhesive for a secure, lasting bond Sits flush for a factory-integrated appearance ISO9001 certified manufacturing process Lightweight at 200g — no structural load on trim panels Reversible installation — removable without damage Complements OEM chrome and gloss interior accents Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 (1st Gen) 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Discovery Sport L550 2019–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Ensure the cup holder panel area is thoroughly clean and completely dry. Use an isopropyl alcohol wipe to degrease the surface and remove any dust, oils, or residue. Dry-fit the trim panel first — align it carefully to the cup holder surround to confirm positioning before committing to adhesion. Peel the protective backing from the pre-applied adhesive tape, taking care not to touch the adhesive surface. Starting from one end, press the panel firmly into position along the cup holder surround, applying steady pressure across the full length of the trim. Hold the panel in place with firm pressure for 30–60 seconds to allow the adhesive to bond properly. Allow the adhesive to cure at room temperature for a minimum of 2 hours before subjecting the panel to vibration or heat from direct sunlight. ⚠ Important: Do not install in cold or damp conditions — adhesive performance is significantly reduced below 10°C. Verify your exact Evoque model code (L551) before fitting. This panel is designed specifically for 2019–2020 production year vehicles; fitment on later facelifted models cannot be guaranteed without confirmation. Explore the Full Evoque L551 Collection We stock a curated range of interior and exterior accessories designed specifically for the Range Rover Evoque L551 — all engineered to the same standard of fit and finish you'd expect from a premium Land Rover specialist. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious · Range Rover Evoque L551 · Interior Trim Carbon Fiber Style Air Conditioning Vent Frame Trim for 2019–2020 Range Rover Evoque L551 Elevate your Evoque's dashboard with premium carbon fiber detailing that transforms the cabin aesthetic in minutes. L551 2019–2020 Carbon Fiber Style Plug & Play Pre-Adhesive Overview The Range Rover Evoque L551 is a bold, contemporary compact luxury SUV that demands interior details to match its design language. These carbon fiber style air conditioning vent frame trims are engineered to complement the Evoque's refined cabin while delivering a modern, purposeful finish that catches light and admiration alike. Precision-fit for the 2019–2020 model years, each pair covers the AC vent frames with authentic-looking carbon fiber weave that rivals OEM-grade materials. The pre-applied automotive adhesive tape makes installation straightforward—no additional fasteners, no drilling, no risk of damage to your dashboard. Built by owners, for owners: we understand what matters. These trims aren't cosmetic afterthought—they're a deliberate upgrade that raises the perceived quality of your interior and gives your Evoque the refined edge it deserves. What's Included 🎯 Carbon Fiber Vent Trims (×2) Pre-adhesive dashboard-ready pair 📋 Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fiber finish with premium UV-resistant coating Direct fit—engineered to L551 OEM dimensions with zero gaps Pre-applied 3M automotive adhesive tape—no messy glues Reversible installation with zero permanent modification Lightweight composite backing for durability and longevity Modern weave pattern adds depth and dimension to dashboard Covers front AC vent frames for maximum visual impact Easy to clean—wipe with soft microfibre cloth Pairs seamlessly with other Victorious carbon trim upgrades Backed by our 30-day money-back guarantee Compatibility Model & Year Compatibility Range Rover Evoque L551 (2019–2020) Direct Fit Range Rover Evoque L551 (2021+) Not Compatible Range Rover Evoque L538 (2011–2018) Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Clean the surface: Use a microfibre cloth and isopropyl alcohol to thoroughly clean the existing AC vent frames. Remove all dust, fingerprints, and residue. Allow to dry completely. Peel and position: Carefully peel back the adhesive tape backing. Start with one corner and align the trim to the vent frame opening—use the vehicle's existing lines as guides. Press firmly: Working from the center outward, press the trim firmly onto the frame to activate the adhesive. Hold pressure for 15–20 seconds per section. Repeat: Apply the second trim to the opposing AC vent frame using the same method. Allow to cure: Wait 24 hours before exposing the vehicle to extreme heat or humidity. The adhesive bond strengthens over this period. ⚠️ Important: Do not apply to wet, cold, or dusty surfaces. Optimal application temperature is 18–25°C. If removal is needed, gently heat the trim edge with a heat gun and peel slowly—the adhesive is removable without residue or damage. Ready to Refine Your Evoque? Small details make the difference between a good interior and a great one. These carbon fiber trims are a fast, reversible way to elevate your Evoque's cabin presence. Shop Evoque Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any official Land Rover distributor. All trademarks and brand names are the property of their respective owners. Product compatibility is based on manufacturer specifications and fitment testing. Always verify fitment with your vehicle's specific year and market variant before purchase.

Victorious · Range Rover Evoque L551 · Interior Trim Carbon Fiber Gear Shift Surround Trim – Range Rover Evoque L551 Elevate your Evoque's cabin with authentic carbon fiber accents that add premium presence to your gear surround area. L551 2019–2020 Carbon Fiber Interior Trim Peel & Stick Overview If you own a Range Rover Evoque L551 from 2019 or 2020, you understand the importance of refined interior details. The gear surround area is one of the first things your hand touches every time you shift—it deserves to reflect your standards. Our Carbon Fiber Gear Shift Surround Trim transforms that critical touchpoint into a statement of quality and taste. This isn't a generic trim piece. It's engineered specifically for your Evoque's geometry, with a finish that matches the sophistication of the cabin. Real carbon fiber construction delivers both visual depth and durability, resisting fading and wear far better than cheaper alternatives. The tactile quality instantly communicates "premium" to every passenger. Installation is genuinely straightforward—pre-applied adhesive backing means no tools, no mess, no guesswork. The piece bonds cleanly to your original surround, creating a factory-finished appearance in under five minutes. This is the kind of upgrade that changes how your interior feels every single day. What's Included 🎁 Carbon Fiber Surround Trim Pre-fitted, ready to install on L551 ✓ Pre-Applied Adhesive Backing Peel and stick installation, no tools needed 📋 Installation Guide Step-by-step instructions included Product Highlights Genuine carbon fiber construction, not vinyl wrap Precision-molded to fit L551 geometry perfectly High-gloss finish resists fingerprints and UV fading Pre-adhesive backing eliminates installation guesswork Factory-finished appearance when installed correctly Complements all interior trim packages and leather options Lightweight, adds zero weight to your vehicle Long-lasting durability under daily use Simple removal if refinishing your cabin later Enhances perceived interior quality significantly Compatibility Model Year Generation Fit Range Rover Evoque 2019 L551 Direct Fit Range Rover Evoque 2020 L551 Direct Fit Range Rover Evoque 2018 & Earlier L538 Not Compatible Range Rover Evoque 2021+ L551 (Facelift) Not Compatible Installation Difficulty: Easy | Time: 5 minutes Prepare the surface: Clean the existing gear surround with a dry, lint-free cloth. Remove any dust or debris. Ensure the surface is completely dry. Position the trim: Carefully align the carbon fiber piece above the surround, checking alignment before committing adhesive to contact. Apply gradually: Peel the backing tape slowly, pressing down firmly with the palm of your hand as you work from top to bottom. Use light, even pressure. Secure the edges: Pay special attention to corners and edges. Press firmly for 10–15 seconds to ensure full contact and adhesion. Allow curing time: Avoid touching, shifting, or placing any weight on the trim for 24 hours after installation. Important: Keep the trim dry for the first 24 hours. Do not wash your vehicle's interior or expose the installation to moisture during the adhesive curing period. Premature contact with water can compromise bonding. Why Victorious Carbon fiber trim is only as good as its fitment and finish. We source materials from suppliers who understand Range Rover's exacting standards. Every piece is quality-checked before shipment. We back every purchase with our 30-day money-back guarantee—if it doesn't meet your expectations, we'll refund you without questions. Over 12,300 verified reviews at 4.9 stars prove our commitment to excellence. Ready to Upgrade Your Evoque's Interior? Transform your gear surround from ordinary to exceptional. This small change delivers outsized impact every time you drive. Shop Range Rover Evoque L551 Trim Use code 22GET20 for 20% off when buying 2 items 4.9★ 12,300+ verified reviews ✓ 30-day guarantee 📦 Worldwide shipping ☎ +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any official Land Rover subsidiary. All vehicle names and trademarks are the property of their respective owners. Our products are designed for fitment and aesthetic enhancement only.

Victorious · Range Rover Evoque L551 · Exterior Trim ABS Chrome Rear Trunk Handle Frame Trim – L551 Elevate your Evoque's tailgate with a premium chrome accent trim that's durable, beautifully finished, and installed in minutes. L551 2019–2020 ABS Material Chrome Finish Self-Adhesive No Tools Required Overview The 2019–2020 Range Rover Evoque L551 deserves details that match its refined character. This ABS Chrome Rear Trunk Handle Frame Trim transforms a functional piece into a statement element, catching light and adding visual depth to your tailgate. Manufactured from premium ABS plastic with a mirror-chrome or carbon fiber finish, this trim piece frames the trunk handle with understated elegance. The automotive-grade adhesive ensures a permanent, secure bond without drilling or fasteners—no permanent modification to your vehicle. Whether you're refining your Evoque's exterior or completing a broader customisation programme, this trim delivers the fit, durability, and presence that separates thoughtful owners from casual buyers. What's Included 📦 Rear Trunk Trim Frame Single-piece ABS component 🔧 Pre-Applied Adhesive Tape 3M automotive-grade backing 📋 Installation Guide Step-by-step photo instructions 💼 Victorious Packing Protective transit box Product Highlights Premium ABS construction with real chrome or carbon fibre finish Perfectly engineered for 2019–2020 L551 Evoque tailgate Pre-applied 3M automotive adhesive—no tools or expertise needed Dual finish options: polished silver or weave carbon fibre Lightweight at 200g—zero impact on performance Dimensions: 300mm L × 100mm W × 50mm H ISO9001 certified manufacturing process Resists UV fade and weather degradation 5-minute installation with minimal surface prep 30-day money-back guarantee—fit or return risk-free Compatibility Model Year Variant Status Range Rover Evoque 2019 All trim levels (L551) Direct Fit Range Rover Evoque 2020 All trim levels (L551) Direct Fit Range Rover Evoque 2021+ All variants Not Compatible Range Rover Evoque 2018 and earlier (L538) All variants Not Compatible Note: This trim is engineered exclusively for L551 platform (2019–2020). Fitment on adjacent model years or generation prior (L538) is not guaranteed and not recommended. Installation Difficulty: Very Easy | Time: 5–10 minutes Clean the surface. Use rubbing alcohol or a dedicated automotive cleaner on the rear trunk handle area. Wipe dry with a lint-free cloth and allow 5 minutes of air-drying. Peel the backing. Gently peel away the protective backing from the pre-applied adhesive tape on the trim piece. Avoid touching the adhesive. Align and press. Position the trim frame over the trunk handle, ensuring symmetrical placement. Press firmly from one end to the other, applying even pressure for 10 seconds. Secure bond. Allow the adhesive to cure for 24 hours before exposure to water or extreme temperature. Important: Surface temperature should be between 15–25°C during installation. Do not install in direct sunlight or on a wet surface. Allow the adhesive full cure time (24 hours) before washing the vehicle. Why Victorious We specialise in Range Rover and Land Rover finishing pieces. Every product is tested for fitment, durability, and finish quality before it ships. Our 4.9/5-star rating from over 12,300 verified owners reflects our commitment to detail. If you have any questions about fitment, finish options, or installation, our team is available Monday–Friday, 9am–7pm (GMT) at +44 203 943 9919. Worldwide shipping via DHL, FedEx, UPS, and TNT. Add Polish to Your Evoque Great exterior trim is about intention. This chrome rear trunk frame tells your Evoque's story—one of care and refinement. Ready to upgrade? Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping included ✓ UK support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or an official division of Jaguar Land Rover, the Range Rover brand, or their parent company. All vehicle names and logos are registered trademarks of their respective manufacturers. This product is designed to enhance and personalise your vehicle and does not alter its safety or structural integrity.

Victorious Automotive · Range Rover Evoque L551 · Exterior Styling ABS Black Front Fog Lamp Frame Trim – Range Rover Evoque L551 (2019–2020) A precision-formed ABS fog light surround trim that adds a purposeful, blacked-out finish to the front fascia of the 2019–2020 Range Rover Evoque L551 — no drilling, no fuss. Evoque L551 2019–2020 ABS Plastic Gloss Black Fog Lamp Trim Exterior Styling Adhesive Fit ISO9001 Certified 200g No Drilling Required Overview The Range Rover Evoque L551 — introduced in 2019 — represents Land Rover's most refined interpretation of the compact luxury SUV. Its sculpted front end, with its bold lower fascia and integrated fog lamp housings, is one of the most distinctive design features on the vehicle. Keeping that detailing looking sharp and intentional matters to owners who take pride in every visual aspect of their Evoque. This front fog lamp frame trim is precision-manufactured from high-grade ABS plastic in a deep gloss black finish. Engineered specifically for the 2019–2020 Evoque L551 platform, each piece is contoured to follow the exact profile of the factory fog lamp recess — ensuring a flush, factory-quality appearance that looks like it was always part of the vehicle's design language. Where the standard fog lamp surrounds can appear understated or, over time, show the effects of road grime and UV exposure, this ABS trim overlay introduces a clean, dark contrast that complements both the Evoque's body colour and its wider design intent. The result is a subtly sportier, more defined front end — without modification, body shop visits, or permanent changes to the vehicle. What's Included 🔲 Fog Lamp Frame Trim Set ABS gloss black surround pieces, pre-cut to fit 🔧 Automotive Adhesive Tape Pre-applied 3M-style backing tape for secure fitment 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-moulded specifically for the Evoque L551 (2019–2020) front fog lamp recess High-grade ABS plastic construction — durable, lightweight, and UV-resistant Gloss black finish adds a bold, blacked-out contrast to the front fascia Adhesive-backed installation — no drilling, cutting, or permanent modification ISO9001-certified production quality for consistent fit and finish Weighs just 200g — no impact on vehicle aerodynamics or performance 31cm × 15cm × 5cm — engineered to match OEM fog lamp housing dimensions Resistant to road wash, car cleaning products, and everyday weathering Fully reversible — remove cleanly without damage to original paintwork Enhances the Evoque's front-end presence with a more defined, sporty character Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the fog lamp surround area on your Evoque's front bumper using isopropyl alcohol or a panel wipe — remove all dirt, wax, and grease residue for maximum adhesion. Allow the surface to dry completely. In cold weather, gently warm the bumper surface and the adhesive backing with a heat gun or hairdryer to improve bond strength. Dry-fit each trim piece without removing the adhesive backing to confirm alignment and positioning before committing to placement. Peel back the adhesive tape backing and carefully align the trim piece from one edge, pressing firmly along the full length to avoid air pockets or misalignment. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before washing the vehicle. ⚠ Note: Do not install in temperatures below 5°C (41°F) as this may significantly reduce adhesive performance. Ensure the bumper surface is completely dry and free of silicone-based products prior to fitting. This trim is designed for the 2019–2020 Evoque L551 only — do not attempt to fit to earlier L538 models as the fog lamp housing dimensions differ. Complete Your Evoque's Look Explore the full range of exterior styling accessories for the Range Rover Evoque L551 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Evoque · Interior Accessories Console Storage Box & Phone Tray for Range Rover Evoque 2019–2020 (L551) A precision-fit centre console storage and phone tray that transforms wasted space in your Evoque into a clean, organised and practical everyday solution. Evoque L551 2019–2020 Direct Fit ABS Plastic Black No Drilling Interior Trim Phone Tray ISO9001 Certified Overview The second-generation Range Rover Evoque, launched in 2019, brought a significantly more sophisticated interior to the compact luxury SUV segment. Its centre console area, while well-designed, leaves room for improvement when it comes to day-to-day practicality — particularly when it comes to keeping your phone, keys and small items within reach and neatly contained. This is precisely the gap this accessory is engineered to fill. This console storage box and phone tray is designed exclusively for the 2019 and 2020 model year Range Rover Evoque (L551). Manufactured from high-grade ABS plastic and finished in a clean matte black, it integrates seamlessly into the existing centre console architecture without any modification to your vehicle. The result is a purposeful addition that looks as though it belongs — because it was made to. Whether it's keeping your smartphone off the seat, corralling loose change, or simply bringing order to the console area on long drives, this tray delivers a marked improvement in interior organisation. Lightweight at just 50g and sized at 15cm × 10cm × 8cm, it slots in cleanly and stays in place. A small upgrade with a daily impact every Evoque owner will appreciate. What's Included 📦 Console Storage Tray Main unit — ABS plastic, matte black finish 📱 Phone Holder Section Integrated slot sized for modern smartphones 🔧 Fitting Hardware Clips / retention tabs for secure placement 📄 Installation Guide Simple reference sheet for fitment Product Highlights Precision-engineered exclusively for the 2019–2020 Range Rover Evoque L551 High-quality ABS plastic construction — durable, lightweight and heat-resistant Matte black finish matches the Evoque's factory interior trim tones Dedicated phone tray keeps your device secure and within easy reach Additional storage compartment for cards, keys, coins or cables Tool-free installation — no drilling, cutting or adhesive required Featherlight at just 50g — no impact on console functionality Compact footprint: 15cm × 10cm × 8cm — fits without blocking controls ISO9001 certified manufacturing process ensures consistent quality Reversible fit — remove cleanly whenever required with no marks left behind Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L551 (2nd Gen) 2019 Direct Fit Range Rover Evoque L551 (2nd Gen) 2020 Direct Fit Range Rover Evoque L538 (1st Gen) 2011–2018 Not Compatible Range Rover Evoque L551 (2nd Gen) 2021+ Verify Before Purchase Discovery Sport L550 2019–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure your Evoque's centre console area is clean and free of debris before fitting. Remove any existing items from the console storage zone where the tray will sit. Align the storage tray with the console cavity, ensuring the phone slot faces toward the driver or front passenger as preferred. Press the tray gently but firmly into position until the retention clips or tabs engage with the console surround. Check that the tray sits flush and does not impede access to any console controls, gear selector, or charging pads. Place your phone or items in the tray to confirm a secure and comfortable fit before driving. ⚠ Please Note: Verify your Evoque's model year and generation (L551) before purchasing. The 2019 Evoque was the first year of the second-generation L551 platform. If you are unsure, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for you. Complete Your Evoque Interior Explore our full collection of Range Rover Evoque accessories — from interior trim upgrades to protective solutions — all curated for the discerning Evoque owner. Shop Range Rover Evoque Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Hand Brake Cover for Range Rover Velar 2017–2020 Upgrade your parking brake surround to premium carbon TPU with SVR-spec aesthetics and clip-on installation. L560 Platform 2017–2020 Carbon TPU Clip-On SVR Look Overview The Range Rover Velar L560 is celebrated for its minimalist, driver-focused interior and precision engineering. Subtle details matter tremendously on a vehicle this refined, which is why the hand brake surround deserves the same calibre of finish as the rest of your cabin. This carbon fibre hand brake cover transforms the standard climate control surround into a striking focal point. Precision-laser-cut to integrate seamlessly with your Velar's existing geometry, it clips directly over the factory piece without adhesives, fasteners, or modification. The result is a premium, integrated appearance that echoes the bold aesthetic found on SVR performance models. Manufactured from high-quality carbon TPU—a composite material that combines authentic carbon fibre weave with durable thermoplastic backing—this cover resists fingerprints, UV damage, and daily wear while maintaining a lustrous, professional finish. Installation takes minutes and requires no special tools or technical knowledge. What's Included 🎯 Carbon TPU Cover Precision-cut hand brake surround 📋 Installation Guide Step-by-step with images ✓ Fit Guarantee Perfect alignment or money back Key Features Authentic carbon fibre weave with TPU backing Laser-cut for precise factory-fit alignment Clip-on design—no adhesive, glue, or screws Resistant to fingerprints and UV fading SVR-inspired aesthetic for stock Velar cabins Durable thermoplastic composite material Reversible installation if needed Complements all interior trim packages Professional finish in under 5 minutes Part of Victorious Carbon Interior Packages Compatibility Model & Year Engine Compatibility Range Rover Velar P250 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P300 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P400 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar D240 (2017–2020) 2.0L Diesel Direct Fit Range Rover Velar D300 (2017–2020) 3.0L Diesel Direct Fit Range Rover Velar SVR (2017–2020) 5.0L Supercharged Direct Fit Range Rover Velar 2021–Present All Engines Not Compatible Installation Guide Prepare: Ensure the hand brake surround and surrounding trim are clean and dry. No pre-treatment needed. Inspect Fit: Carefully position the carbon cover over the factory climate surround. Align clip points on all edges. Clip Engagement: Press firmly and evenly around all four sides until clips engage fully. You'll hear or feel a soft click. Verify Security: Gently pull on the cover to confirm it's firmly seated. Check that all edges are flush with surrounding trim. Final Check: Operate your hand brake lever to ensure full clearance and smooth motion. Adjust if necessary. Note: If your Velar has bespoke interior trim or non-standard dash finishes, test-fit the cover before finalising installation. The cover is reversible and will not damage factory components. Ready to Upgrade Your Velar? Transform your cabin with SVR-spec carbon fibre detailing. This hand brake cover is part of our comprehensive Carbon Interior Packages—designed to elevate every surface that matters. Shop Range Rover Velar Parts Save 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 – 12,300+ Reviews ✓ 30-Day Money Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS 📞 Expert Support Mon–Fri 9am–7pm GMT Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Installation of aftermarket parts may void manufacturer warranty in some cases—please verify with your Land Rover dealer before proceeding.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Cup Holder for Range Rover Velar 2017–2020 Transform your rear cabin with hand-fitted carbon fibre detailing that rivals SVR specification models. Velar 2017–2020 Carbon Fibre Clip-On SVR Look Premium TPU Overview The Range Rover Velar remains one of the most beautifully proportioned luxury SUVs on the road. Its minimalist interior philosophy extends to the rear cabin, where understated climate controls occupy the space between rear seats. If you own a 2017–2020 Velar and want the assertive presence of an SVR variant without the full powertrain commitment, this carbon fibre rear cup holder upgrade is your answer. This is a direct replacement for the standard cup holder cover. Instead of blending with the plastics around it, high-grade carbon fibre TPU creates a striking focal point that catches light and draws the eye downward. The weave pattern reflects attention to detail—the kind you'd find in Range Rover's dedicated performance division. Each piece is laser-cut for absolute precision, meaning zero gaps, zero alignment guesswork, and zero disappointment when it arrives. Installation takes minutes. The new cover simply clips over your existing climate control housing. No tools, no drilling, no modifications to the vehicle. Remove it in seconds if needed. It's the ideal entry point into carbon interior styling, and a perfect pairing for other SVR upgrades like door handles, shift paddles, or centre console trims. What's Included 📦 Carbon Fibre Cup Holder Cover Precision laser-cut TPU with 3K weave finish 🔧 Installation Guide Step-by-step photo instructions included ✨ Cleaning Cloth Microfibre cloth to maintain finish Product Highlights Hand-fitted carbon fibre TPU material for premium durability Laser-cut precision ensures perfect alignment first time Clips over existing climate control housing—no permanent modification Matches SVR interior specification look and feel Lightweight yet rigid construction withstands daily use Authentic 3K carbon weave visible through clear topcoat Weather-resistant material safe for all cabin temperatures Part of Victorious Automotive carbon interior package ecosystem Works seamlessly with factory rear cup holder functionality 30-day money-back guarantee—zero risk to try Compatibility Model Year Range Status Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Evoque All Years Not Compatible Range Rover Sport All Years Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Power off the vehicle and ensure the cabin has cooled to room temperature. Locate the rear cup holder cover (climate control panel between rear seats). Gently lift the existing cover to expose the clip points underneath. Align the carbon fibre cover with the four mounting clips and press firmly downward until you hear a click at each corner. Verify the cover sits flush with no rocking or movement. Test cup holder functionality. Clean the exposed carbon fibre weave with the included microfibre cloth. Note: The climate control functionality below remains unchanged. This cover sits on top and does not interfere with airflow or controls. If the cover feels loose after installation, remove it and inspect clips for debris. Complete Your SVR Interior Ambition One detail at a time, you can transform your Velar into the high-performance variant you love. This carbon rear cup holder is the perfect starting point—affordable, reversible, and instantly visible to anyone who rides in the rear cabin. Explore All Velar Upgrades Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any parent company. All vehicle names, logos, and trademarks are the property of their respective owners and used for identification purposes only. Product fitment and compatibility are based on manufacturer specifications and field testing. Always verify compatibility before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Tweeter & Speaker Silver Trim for Range Rover Velar 2017–2020 Elevate your Velar's cabin with precision-cut matte silver tweeter and speaker surrounds — a clean, factory-grade upgrade that delivers the SVR aesthetic without the dealership price tag. Range Rover Velar 2017–2020 Matte Silver TPU Material Clip-On Fit SVR Look Set of 2 No Drilling Overview The Range Rover Velar was designed to blur the line between art and engineering — a vehicle that made minimalism feel genuinely luxurious. But even in that context, the standard interior trim can feel like it's leaving something on the table, particularly when viewed against the more purposeful, contrast-rich cabin of the SVR derivative. That gap is exactly where this upgrade steps in. These matte silver tweeter and speaker surrounds are precision laser-cut from high-quality carbon TPU, engineered specifically for the 2017–2020 Range Rover Velar. Each piece clips directly over the existing speaker housing — no adhesive, no drilling, no permanent modification. The result is a seamless, factory-finish appearance that integrates naturally with the Velar's signature interior language. Supplied as a pair, these trims form part of the Victorious Silver Interior Package for the Velar — a curated collection of complementary matte silver accents designed to work together across the cabin. Whether you're upgrading incrementally or going for the full interior transformation, this is a detail that makes an immediate visual impact every time you open the door. What's Included 🔊 Silver Tweeter / Speaker Trim × 2 Matte silver, laser-cut TPU — left and right pair 📋 Fitting Guide Simple step-by-step installation instructions included 🛡️ Protective Packaging Safely packaged to arrive scratch-free and ready to fit Product Highlights Precision laser-cut for an exact, gap-free fit on the Velar housing Matte silver finish — subtle, premium, and SVR-inspired Clips directly over existing speaker trim — zero modification required High-quality carbon TPU construction for durability and rigidity Supplied as a full pair — left and right door trims included Part of the wider Victorious Silver Interior Package for the Velar No adhesive, no drilling, no risk of interior damage Achieves the SVR interior look at a fraction of the cost Tool-free installation completable in under 10 minutes Reversible — original trim can be restored at any time Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar 2021–2023 All Trims (Facelift) Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 2011–2018 All Trims Not Compatible Range Rover Evoque L551 2019–2024 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Time: 5–10 Minutes  ·  🛠 Tools Required: None Start with the vehicle stationary and the interior at room temperature to ensure the TPU clips seat cleanly. Locate the existing tweeter / speaker housing on the door panel of your Velar — the trim surrounds the speaker grille. Take the corresponding silver trim piece (left or right) and align it centrally over the existing housing. Apply gentle, even pressure around the perimeter of the trim until you hear and feel it clip securely into place. Repeat for the second door. Run a finger around the edge to confirm full, flush contact with no lifting. Stand back and inspect both trims from a natural viewing angle to confirm alignment and finish. ⚠ Please Note: These trims are designed exclusively for the pre-facelift Range Rover Velar (2017–2020). Attempting to fit them to later or alternative models may result in an imperfect fit. If you are unsure of your model year, check your V5C or contact us on +44 203 943 9919 before ordering. Complete the Look These speaker trims are part of a full Silver Interior Package for the Range Rover Velar. Browse the complete collection to match your door handles, climate controls, and dashboard accents — and bring the SVR interior aesthetic to your build. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Upgrades Stainless Steel Sport Pedals for Range Rover Velar 2017–2020 Precision-crafted stainless steel and rubber pedal covers that bring a sharper, more driver-focused feel to the Velar's already refined cabin — with a fitment engineered specifically for 2017–2020 models. Range Rover Velar 2017–2020 Stainless Steel Rubber Inserts Direct Fit Brake & Accelerator No Drilling Required Interior Upgrade Overview The Range Rover Velar arrived as one of Land Rover's most design-forward vehicles — a study in restrained luxury that brought a minimalist, tech-driven interior to the Velar lineup. Every surface in the cabin was considered carefully, and the footwell is no exception. Yet the standard pedal covers, while functional, rarely reflect the sporting character that many Velar owners drive with. These stainless steel pedals address that directly. Constructed from high-grade stainless steel with anti-slip rubber inserts, these pedal covers are precision-shaped to match the original brake and accelerator pedal dimensions on 2017–2020 Range Rover Velar models. The result is a clean, purposeful upgrade that improves both the visual quality of the footwell and the tactile confidence underfoot — particularly during spirited driving where pedal feel genuinely matters. Installation requires no specialist tools, no permanent modifications and no drilling. The covers clip securely over the factory pedals in minutes, making this one of the most impactful and straightforward interior upgrades available for the Velar. Whether you're refreshing a well-used footwell or simply finishing the cabin to a higher standard, these pedals deliver exactly what the Velar's character demands. What's Included 🦶 Accelerator Pedal Cover Stainless steel with rubber grip inserts 🛑 Brake Pedal Cover Stainless steel with rubber grip inserts 🔩 Mounting Hardware Clips and fixings for secure no-drill fit 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-fit design for 2017–2020 Range Rover Velar High-grade stainless steel construction throughout Anti-slip rubber inserts for confident pedal control Covers both brake and accelerator pedals No drilling, cutting or permanent modification required Clip-on fitment installs in under 15 minutes Resistant to wear, moisture and everyday footwell conditions Polished finish complements the Velar's premium interior aesthetic Adds a subtle performance feel without altering factory function Direct factory pedal replacement aesthetic — OEM proportions retained Compatibility Vehicle Year Range Transmission Fitment Range Rover Velar (L560) 2017–2020 Automatic Direct Fit Range Rover Velar (L560) 2021–2023 Automatic Verify Before Purchase Range Rover Evoque (L538) 2011–2018 Automatic Not Compatible Range Rover Evoque (L551) 2019–2024 Automatic Not Compatible Range Rover Sport (L494) 2013–2020 Automatic Not Compatible Range Rover Vogue (L405) 2013–2020 Automatic Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and the footwell is clean and dry before beginning fitment. Remove any floor mats from the driver's footwell to give clear, unobstructed access to both pedals. Align the accelerator pedal cover over the factory accelerator pedal, ensuring the rubber inserts face upward and the mounting clips line up with the pedal edges. Press the cover firmly onto the pedal until all clips engage and the cover sits flush with no movement or rattle. Repeat the same process for the brake pedal cover, taking care to centre the cover evenly over the factory pedal face. Apply light foot pressure to both pedals to confirm secure fitment before returning the floor mat and test driving. ⚠ Safety Note: Before driving, always verify that both pedal covers are firmly secured and do not interfere with pedal travel or return. If any cover feels loose or obstructs pedal movement, remove immediately and re-fit before use. Complete Your Velar's Interior These pedals are just the beginning. Explore the full Victorious range of Range Rover Velar accessories — from interior trim upgrades to exterior styling — and build a cabin that's entirely your own. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar / Evoque · Interior Trim Aluminum Alloy Air Conditioning & Volume Knob Ring Trim — Range Rover Velar & Evoque 2017–2020 Precision-machined aluminum alloy trim rings that upgrade your climate and volume controls with a tactile, premium finish worthy of the cabin they inhabit. Range Rover Velar 2017–2019 Range Rover Evoque 2019–2020 Aluminum Alloy 3-Piece Set No-Tool Fit Blue · Red · Silver Interior Trim AC & Volume Controls Overview The Range Rover Velar and second-generation Evoque are among the most design-forward vehicles Land Rover has ever produced. Every surface in the cabin is considered — and the rotary controls for climate and audio are no exception. As daily-use touch points, they deserve the same level of finish as the rest of the interior architecture. These aluminum alloy knob ring trim pieces are precision-formed to sit flush over the existing air conditioning and volume control dials, adding a machined, anodised layer of quality that the factory finish simply doesn't deliver. Available in three colourways — Blue, Red, and Silver — they allow you to personalise the feel of your cockpit without modifying anything permanently. Designed specifically around the factory knob profiles of the Velar (2017–2019) and Evoque (2019–2020), each ring fits cleanly and securely with no adhesive required. The result is an immediate visual and tactile upgrade that takes under a minute to achieve — and is entirely reversible. What's Included 🔘 AC Knob Ring × 2 Fits left and right climate control dials 🎚️ Volume Knob Ring × 1 Fits central audio/volume rotary control 📦 Full 3-Piece Set All three rings included per order Product Highlights Precision-machined aluminum alloy construction Available in Blue, Red, and Silver anodised finishes Designed to fit factory knob profiles exactly No tools, adhesive, or modification required Direct press-fit installation in under 60 seconds Covers all three main rotary controls (3-piece set) Fully reversible — remove without damage any time Adds premium tactile and visual quality to the cockpit Lightweight construction — adds no perceptible weight Purpose-built for Velar 2017–2019 and Evoque 2019–2020 Compatibility Vehicle Year Range Fit Notes Range Rover Velar 2017 · 2018 · 2019 Direct Fit All trim levels Range Rover Evoque (L551) 2019 · 2020 Direct Fit 2nd Gen Evoque (L551) Range Rover Evoque (L538) 2011–2018 Not Compatible Different knob profile — 1st Gen Range Rover Velar (2020+) 2020–present Verify Before Purchase Minor interior updates may affect fit Range Rover Sport L494 2013–2020 Not Compatible Different rotary control design Defender L663 2020–present Not Compatible Different climate control layout Installation Notes ⏱ Estimated Time: Under 5 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure the vehicle is off and the interior is clean and dry around the control area. Select your preferred colourway (Blue, Red, or Silver) before beginning. Align the first aluminum ring over the corresponding factory knob — match the centre bore carefully. Apply gentle, even downward pressure until the ring seats flush against the dial surround. Repeat for the remaining two rings — volume control and second AC dial. Check each ring is fully seated and turns freely with the knob beneath it. No adhesive is required or recommended. ⚠ Please Note: These rings are designed as press-fit overlays. Do not force or apply excessive pressure. If resistance is felt, check alignment before proceeding. Verify your exact model year before ordering — interior specifications can vary between production runs within the same year. Elevate Every Touch Point The controls you reach for most deserve the same standard as the rest of your Range Rover's interior. Upgrade your Velar or Evoque with confidence — backed by our 30-day money-back guarantee and 4.9-star rated service. Shop Range Rover Velar Accessories Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious · Range Rover Velar · Interior Trim Pillar Vent Carbon Fibre Covers for Range Rover Velar 2017–2020 Transform your Velar's cabin with premium carbon fibre pillar vents in SVR-inspired styling. L560 Velar 2017–2020 Carbon Fibre TPU Clip-On Design SVR Look Overview The Range Rover Velar has captivated enthusiasts since its 2017 launch. Its fluid design language and refined interior set a new benchmark for premium compact SUVs. However, many owners want that distinctive SVR-specification aesthetic—sharper, bolder, unmistakably high-performance. These pillar vent covers deliver exactly that. Using precision-cut carbon fibre TPU, they replace your factory plastic vents with a material and finish that instantly elevates the cabin. Each cover is laser-cut to fit your Velar perfectly, with no modifications needed. They simply clip over your existing vents—installation is literally plug-and-play. The carbon weave catches light beautifully in daylight and gleams under interior ambient lighting. Paired with other carbon interior packages, they create a cohesive, SVR-inspired cockpit that turns every drive into a statement. What's Included 📦 Pillar Vent Covers (Pair) Left and right door pillar vents ✨ Carbon Fibre TPU Material Premium, durable, lightweight 🔧 Factory Fitment Clips No tools or modifications required 📋 Laser-Cut Precision Perfect alignment guaranteed Product Highlights High-quality carbon fibre TPU construction Laser-cut for perfect fitment every time Clip-over design—no removal of factory vents Lightweight and durable material SVR-specification cabin aesthetic Weatherproof and UV-resistant finish Works seamlessly with other carbon packages Professional appearance, DIY installation Suitable for all 2017–2020 Velar models 30-day money-back guarantee included Compatibility Model Years Compatibility Range Rover Velar 2017–2020 (L560) Direct Fit Range Rover Velar 2021+ Facelift Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Guide Difficulty: Beginner · Time: 5 minutes Open both front doors and locate the A-pillar vent covers on either side of the windscreen. Gently prise the edge of the factory vent cover with a soft plastic tool to loosen the factory clips. Remove the factory cover—it simply clips out; no wiring or fasteners are attached. Align the carbon fibre cover with the vent housing and press firmly until all clips engage. Close your doors and inspect both sides for even fitment. Adjust if needed by pressing firmly on the perimeter. Step back and admire your upgraded cabin. Tip: Ensure both covers are fully seated before closing doors. The factory clips will audibly click when properly engaged. Do not force the covers into place; correct alignment should feel smooth and confident. Complete Your Velar's Interior Transformation Pair these pillar vent covers with our full carbon fibre interior package—dashboard trim, air vents, steering wheel accents, and more. Build the exact SVR-inspired cabin you've imagined, piece by premium piece. Shop Range Rover Velar Parts Use code 22GET20 for 20% off any 2 items 4.9★ · 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide DHL / FedEx Shipping +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, or any official Land Rover subsidiary. All vehicle names and designations are the property of their respective manufacturers. This product is designed for enthusiast customisation only.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver ABS Door Speaker Decoration Trim — Range Rover Velar 2017–2020 Precision-cut matte silver TPU trim panels that clip directly over your Velar's existing door speaker surrounds — delivering an instant SVR-inspired interior upgrade with zero permanent modification. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Set of 4 Clip-On Fit SVR Look Interior Trim No Drilling Overview The Range Rover Velar is one of the most design-forward vehicles Land Rover has produced — every surface, every line considered. But the standard door speaker surrounds, while clean, leave room for the kind of elevated finish that owners of this calibre of vehicle rightly expect. These matte silver door speaker decoration trims are engineered precisely for that gap between standard and exceptional. Crafted from high-grade ABS with a premium TPU overlay in a refined matte silver finish, each piece is laser-cut to match the exact curvature and geometry of the Velar's door panel architecture. The result is a flush, factory-quality appearance that draws the eye without overwhelming the cabin's restrained design language. Think of it as the detail that makes the interior feel complete — the kind of finish you'd expect on the SVR specification. Installation requires no tools, no adhesives, and no modification to your vehicle. Each trim panel clips securely over the existing door speaker cover using a precision retention system, meaning they can be fitted or removed in minutes. As part of our wider Velar Interior Package series, these trims pair beautifully with our dashboard, centre console, and door handle accent pieces for a fully cohesive interior transformation. What's Included 🔲 Front Left Speaker Trim Driver-side door, precision laser-cut fit 🔲 Front Right Speaker Trim Passenger-side door, mirror-matched profile 🔲 Rear Left Speaker Trim Rear driver-side door panel fitment 🔲 Rear Right Speaker Trim Rear passenger-side door panel fitment 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Matte silver finish for a premium, understated aesthetic High-grade ABS construction with quality TPU surface layer Laser-cut for exact dimensional accuracy and panel alignment Clip-on installation — no tools, drilling, or adhesives required Full set of four pieces covers all door speaker positions Replicates the SVR interior specification look and feel Completely reversible — original trim remains undamaged UV-stable finish resists discolouration and interior sun exposure Fits seamlessly within the Velar's existing door panel geometry Part of a wider Velar interior trim collection for cohesive styling Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2021–2022 All Variants Verify Before Purchase Range Rover Evoque (L538) All Years All Variants Not Compatible Range Rover Evoque (L551) All Years All Variants Not Compatible Range Rover Sport (L494) All Years All Variants Not Compatible Range Rover Vogue (L405) All Years All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Clean each door speaker surround thoroughly using a microfibre cloth to remove any dust, oils, or residue that could prevent a secure fit. Remove each trim panel from its packaging and identify the correct piece for each door position — front left, front right, rear left, rear right. Hold the trim panel against the corresponding speaker surround and align the outer edges carefully with the existing door panel profile. Apply gentle, even pressure across the surface of the trim — starting from the centre and working outward — until all retention clips engage and the panel sits flush. Run your finger around the perimeter of each piece to confirm full seating and check for any gaps or misalignment before closing the doors. Repeat for all four door positions. No adhesive, heat gun, or additional fixings are required. Note: Ensure the door panel surface is completely dry before fitting. Do not force the clips if the panel feels misaligned — reposition and re-attempt to avoid stress marks on either the trim piece or the original door cover. Explore More Velar Accessories This trim is part of our curated Range Rover Velar interior and exterior collection. Browse the full range of accessories designed specifically for your vehicle at victorious.shop/collections/range-river-velar. Elevate Your Velar Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision accessories that respect the vehicle as much as you do. Worldwide shipping via DHL, FedEx, UPS, and TNT — and a 30-day money-back guarantee on every order. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Velar · Interior Trim Head Pillow Adjustment Decoration Button Trim for Range Rover Velar 2017–2022 ABS chrome button trim that elevates the headrest adjustment controls on your Range Rover Velar — a small detail that makes an immediate visual difference inside the cabin. Range Rover Velar 2017–2022 ABS Chrome Interior Moulding 5 Colour Options 3M Adhesive Fit ISO9001 Certified LLK780 Overview The Range Rover Velar was designed from the outset to blur the line between sculpture and vehicle — its interior is one of the most refined in the SUV class. For owners who take that philosophy seriously, every surface matters, including the small but frequently touched headrest adjustment buttons. Left in their standard form, these controls can look surprisingly plain against the Velar's otherwise considered cabin design. This ABS chrome decoration trim for the head pillow adjustment buttons addresses exactly that. Precision-formed to sit flush over the factory controls, it introduces a polished or colour-matched accent at one of the most visible points in the rear seat area. Available in five finishes — Silver, Gold, Red, Black, and Blue — there's an option to complement either a factory interior palette or a more personalised build. Certified to ISO9001 manufacturing standards and backed by the metyoucar LLK780 model specification, this trim is built to the kind of tolerances that won't look out of place in a premium British SUV. If you're refining the Velar's interior one considered piece at a time, this is exactly the level of detail worth attending to. What's Included 🪄 Chrome Button Trim Set ABS chrome headrest adjustment button covers 🔲 3M Adhesive Backing Pre-applied for clean, tool-free installation 📋 Installation Guide Basic fitting reference included Product Highlights Precision-moulded ABS chrome construction for a factory-quality finish Available in 5 finishes: Silver, Gold, Red, Black, and Blue Pre-applied 3M adhesive — no drilling, no tools required Designed specifically for the Range Rover Velar headrest adjustment buttons ISO9001 certified manufacturing for consistent quality control Lightweight at just 12g — no impact on headrest function or movement Direct fit over OEM controls with no modification needed Chrome finish resists fingerprints and light surface wear Subtle upgrade with a high visual impact in the cabin Colour options suit both standard and custom interior specifications Compatibility Vehicle Year Range Fitment Range Rover Velar 2017–2022 Direct Fit Land Rover Discovery Sport 2015–2017 Direct Fit Range Rover Sport L494 2013–2020 Verify Before Ordering Range Rover Vogue L405 2013–2020 Verify Before Ordering Land Rover Discovery 5 2017–2022 Verify Before Ordering Range Rover Velar (2023+) 2023–Present Not Compatible If your vehicle is not listed or you're unsure, please contact us at +44 203 943 9919 before ordering. Our team is available Monday to Friday, 9am–7pm. Installation Notes Difficulty: Very Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Clean the headrest adjustment button surface thoroughly using an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond. Identify the correct trim piece for each button position (refer to any included guide or test-fit without removing the adhesive backing first). Peel back the 3M adhesive protective layer from the rear of the trim piece. Align the trim carefully over the headrest button and press firmly into position for 20–30 seconds to activate the adhesive bond. Allow 24 hours before applying any significant pressure or cleaning around the fitted area to ensure full cure. ⚠ Note: Do not install on damp, greasy, or cold surfaces. In cooler climates, allow the trim and adhesive to reach room temperature before fitting. Attempting to reposition after initial adhesion may reduce bond strength. Browse More for Your Vehicle 🚙 Range Rover Velar Shop the full Velar collection → 🚙 Discovery Sport Shop Discovery Sport accessories → 🚙 Land Rover Discovery 5 Shop Discovery 5 accessories → Elevate Every Detail Thousands of Range Rover and Land Rover owners trust Victorious Automotive to help them finish their vehicles to the standard these machines deserve. Rated 4.9/5 from over 12,300 verified reviews. Shop All Velar Accessories Use code 22GET20 — save 20% when you buy any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Electronic Handbrake Switch Frame — ABS Interior Trim for Range Rover Velar 2017–2020 Elevate your Velar's centre console with a precision-cut matte silver handbrake switch surround that delivers the premium SVR aesthetic in minutes — no tools required. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Electronic Handbrake Frame Clip-On Fit No Drilling SVR Style Interior Trim Overview The Range Rover Velar introduced one of the most architecturally refined interiors Land Rover has ever produced — a clean, horizontal layout anchored by a dual-stack touchscreen and a beautifully minimal centre console. It's a cabin that rewards attention to detail, and that means even the smallest trim panels can make a meaningful difference to how the whole interior reads. This matte silver electronic handbrake switch frame is precision laser-cut to wrap seamlessly around the existing parking brake control area on Velar models produced between 2017 and 2020. Manufactured from high-quality ABS and TPU, the finish is a sophisticated brushed silver that closely mirrors the uprated trim found on top-specification and SVR-inspired Range Rover interiors. It clips directly over the factory surround without any adhesive, drilling, or modification to your vehicle's existing panels. Forming part of our broader Velar Interior Package range, this piece is designed to be combined with other silver trim upgrades across the console and door cards for a fully cohesive, factory-upgrade appearance. Whether you're making a single focused improvement or building out a complete interior refresh, this handbrake frame is an effortless starting point with an impact well above its price point. What's Included 🖼️ Handbrake Switch Frame Matte silver ABS/TPU surround, laser-cut to shape 📋 Fitting Instructions Simple clip-over guidance included Product Highlights Precision laser-cut for an exact, flush fit on the Velar centre console Matte silver finish matches SVR and top-specification Range Rover trim tones Clips directly over the existing handbrake surround — zero drilling required High-quality ABS and TPU construction for long-term durability and colour stability No adhesives needed — fully reversible upgrade with no damage to factory trim Designed as part of a wider Velar interior trim package for a cohesive look Covers the parking brake control area without interfering with switch operation Resistant to the daily wear of UV exposure, temperature change, and handling Achieves the premium SVR interior aesthetic without the cost of a full retrim Compatible with both standard and upgraded centre console configurations on the Velar Compatibility Vehicle Years Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic, First Edition Direct Fit Range Rover Velar (L560) 2021–2023 All Trims Verify Before Purchase Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Evoque L538 / L551 All Years All Trims Not Compatible Land Rover Discovery 5 All Years All Trims Not Compatible If your Velar was produced after 2020 or you are unsure of your build date, please contact our team on +44 203 943 9919 before ordering. Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure your vehicle is parked, the engine is off, and the electronic handbrake is engaged in its resting position. Clean the existing handbrake surround area with a dry microfibre cloth to remove any dust or residue that could interfere with the clip fit. Align the matte silver frame over the factory handbrake switch surround, checking that the cutouts line up precisely with the switch housing. Apply even, firm pressure around the perimeter of the frame until all retaining clips engage and the trim sits flush against the existing panel. Run your finger around all edges to confirm there are no lifted sections or gaps — the piece should feel solid and fully seated. Step back and inspect the fitment. For best results, pair with other Victorious silver interior trim pieces from our Velar collection. Note: Do not apply adhesive or heat. This trim is designed to be fully reversible. If resistance is felt during installation, check alignment before applying further pressure. Forcing a misaligned piece may cause minor scuffing to the factory surround. Complete Your Velar Interior This handbrake frame is one component of our full Range Rover Velar interior trim package. Browse the complete collection to match your console, door switches, air vent surrounds, and gear selector area in the same matte silver finish for a fully unified result. → Browse All Range Rover Velar Accessories Upgrade Your Velar Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Worldwide shipping via DHL, FedEx, and UPS — backed by our 30-day money-back guarantee. Shop Velar Interior Trim Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque · Interior Trim Matte Silver ABS Rear Row Cup Holder Cover Trim — Range Rover Evoque 2019–2020 A precision-fit interior trim piece that brings a refined matte silver accent to your Evoque's rear cup holder surround — installed in minutes, no tools required. Evoque L551 2019–2020 ABS Plastic Matte Silver Rear Interior Cup Holder Trim 3M Tape Install ISO 9001 Certified Overview The Range Rover Evoque has always punched above its weight in terms of interior refinement — it's a compact SUV that genuinely feels premium. For 2019 and 2020 model year Evoque owners, the rear cabin experience is just as important as the front, and the smallest details contribute to that sense of quality. The rear cup holder surround, while functional, can look understated compared to the rest of the cabin's character. This matte silver ABS cup holder cover trim from metyoucar is designed specifically to overlay the rear row cup holder bezel on the Range Rover Evoque (2019–2020), as well as the Range Rover Velar (2017–2019). Crafted from high-grade ABS plastic with a satin matte silver finish, it integrates seamlessly with the surrounding trim to create a cohesive, factory-adjacent aesthetic — without the factory price tag. The piece weighs just 29 grams and attaches cleanly via pre-applied 3M adhesive tape on the reverse face. There's no drilling, no permanent modification, and no specialist tools needed. It's the kind of subtle upgrade that you'll notice every time you get in, and that rear passengers will appreciate just as much as you do. What's Included 🪄 Rear Cup Holder Cover Trim ×1 — Matte silver ABS overlay piece, pre-fitted with 3M adhesive 🔲 3M Adhesive Backing Pre-applied to reverse face for clean, residue-free bonding 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-engineered fit for Evoque 2019–2020 rear cup holder surround Also compatible with Range Rover Velar 2017–2019 High-quality ABS plastic construction — durable and lightweight at just 29g Matte silver finish complements Evoque's interior colour palette 3M adhesive backing provides strong, long-lasting bond without drilling Tool-free installation — completed in under 5 minutes ISO 9001 certified manufacturing process for consistent quality No permanent modification to your vehicle's trim or panels Reversible — can be removed cleanly if required Ideal for refreshing worn or scratched original cup holder surrounds Compatibility Vehicle Model Code Year Range Fitment Range Rover Evoque L551 2019 – 2020 Direct Fit Range Rover Velar L560 2017 – 2019 Direct Fit Range Rover Evoque L538 (Mk1) 2011 – 2018 Not Compatible Range Rover Evoque L551 2021 onwards Verify Before Purchase Range Rover Sport L494 2013 – 2022 Not Compatible Land Rover Discovery Sport L550 2015 – 2022 Not Compatible If your model year falls outside the listed range or you're unsure of your vehicle's trim variant, please contact us before ordering — we're happy to confirm fitment. Installation Notes ⏱ Estimated Time: 5 minutes  |  🔧 Difficulty: Beginner  |  🛠 Tools Required: None Ensure the existing rear cup holder surround is clean, dry, and free from dust or grease. Use an alcohol wipe or IPA solution for best adhesion. Test-fit the trim piece over the cup holder surround without removing the 3M backing to confirm alignment and orientation. Once satisfied with positioning, peel the protective film from the 3M adhesive backing on the reverse of the trim piece. Carefully align the trim piece over the cup holder surround and press firmly into place, applying consistent pressure across the full surface for 30–60 seconds. Allow 24 hours for the adhesive to fully cure before subjecting the trim to heavy use or cleaning. ⚠ Note: Avoid fitting in cold temperatures below 10°C as this may reduce initial adhesive effectiveness. Do not use silicone-based cleaners on or near the trim as these can compromise the bond over time. Elevate Your Evoque's Rear Cabin Small details define the premium experience. Browse the full Range Rover Evoque interior accessories collection at Victorious Automotive and build a cabin that reflects how much you care about your vehicle. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Mercedes-Benz · E-Class W213 · Interior Trim Aluminum Alloy Tweeter Speaker Cover Trim – Mercedes-Benz E-Class W213 Premium aluminum speaker covers that elevate your cabin's aesthetic with a durable, wear-resistant finish. W213 2016–2017 Aluminum Alloy Matt Finish Direct Fit Pair Overview Designed specifically for the 2016–2017 Mercedes-Benz E-Class W213 (E200L and E300L models), these Aluminum Alloy Tweeter Speaker Cover Trims represent a precise, thoughtful upgrade to your vehicle's interior styling. The tweeter speaker area is often overlooked in cabin aesthetics, yet it remains highly visible from driver and passenger viewpoints. Crafted from high-quality aluminum alloy with a sophisticated matt finish, these covers integrate seamlessly with modern cabin design while providing genuine protection to your speaker components. The weight and finish communicate premium build quality, and the ISO9001 certification confirms manufacturing consistency and durability standards. Whether you're refreshing a well-loved E-Class or adding detail refinement to a recent purchase, this pair delivers lasting visual impact with practical wear resistance that won't degrade under daily use. What's Included 🎚️ Tweeter Speaker Covers Pair, aluminum alloy construction 🛠️ Ready to Install Pre-fitted design, minimal fastening required Product Highlights High-grade aluminum alloy material for superior durability Matt finish eliminates glare and maintains premium appearance Seamless integration with E-Class W213 cabin geometry Lightweight at 200g per pair – negligible impact on overall trim Wear-resistant coating withstands daily exposure and cleaning ISO9001 certified manufacturing for consistent quality Direct fit – no cutting, drilling, or modification required Protects speaker components from dust and minor contact Modern aesthetic suits both E200L and E300L variants Reversible investment – removes without permanent alteration Compatibility Model Year Engine Status Mercedes-Benz E-Class 2016–2017 E200L / E300L Direct Fit E-Class W213 2018+ All variants Verify First Other Mercedes Models Any All Not Compatible Note: Always confirm your vehicle's model year and tweeter speaker location before ordering. Photography or VIN-based verification is recommended for 2018+ E-Class vehicles. Installation Difficulty Level: Beginner | Time: 15–20 minutes Preparation: Disconnect the vehicle's negative battery terminal and allow 10 minutes for electrical systems to discharge fully. Locate tweeter speakers: Identify the tweeter speaker locations within your cabin – typically in the door panels or dashboard upper trim area. Consult your owner's manual for exact placement. Remove existing trim (if applicable): Gently pry away any original speaker grilles using a plastic trim tool to avoid scratching surrounding surfaces. Position new covers: Align the aluminum alloy cover trims with the speaker aperture, ensuring flush seating against the cabin panel. Secure fastening: Use the included or OEM-specification fasteners to attach covers. Do not over-tighten – gentle, even pressure is sufficient. Final inspection: Verify that both covers sit level and are free of gaps or misalignment. Reconnect the negative battery terminal. Test audio: Power up your infotainment system and confirm tweeter speaker function at moderate volume. ⚠️ Important: Always confirm fastener compatibility with your vehicle's interior trim material. If you are unfamiliar with automotive electrical disconnection procedures, professional installation is strongly recommended. Improper fastening may damage interior components or compromise speaker function. Ready to Elevate Your E-Class Interior? These aluminum alloy tweeter speaker covers deliver the detail refinement that separates a good cabin from a great one. Built to last, certified for quality, and designed for your exact model—this is interior upgrade that you'll notice every drive. Shop Tweeter Speaker Covers Use code 22GET20 for 20% off any 2 items 30-Day Money-Back Guarantee ISO9001 Certified Worldwide Shipping 4.9★ / 12,300+ Reviews Disclaimer: This product is not affiliated with, endorsed by, or manufactured by Mercedes-Benz AG or any of its subsidiaries. All references to Mercedes-Benz models, trademarks, and specifications are for identification and compatibility purposes only. Always verify fitment with your specific vehicle before purchase. Victorious Automotive is an independent aftermarket accessory retailer.

Victorious · Mercedes-Benz · Interior Trim Carbon Fiber Rear Seat Cup Holder Cover Trim for Mercedes-Benz E-Class W213 Premium carbon fiber interior upgrade designed to elevate your E-Class cabin with authentic motorsport-grade finish and seamless fitment. W213 2016–2018 Carbon Fiber Direct Fit Rear Seat Cup Holder Cover Interior Moulding Overview The Mercedes-Benz E-Class W213 (2016–2018) represents refined German engineering and understated luxury. The rear seat cabin deserves equal attention to detail, and this carbon fiber cup holder cover trim delivers exactly that—a tactile, visually striking upgrade that transforms the backseat experience. This OEM-grade interior moulding is crafted from authentic carbon fiber composite, engineered to match the factory geometry of your E-Class perfectly. The rear seat water cup holder cover is often overlooked, but it's one of the first surfaces rear passengers interact with. Upgrading to carbon fiber elevates perceived quality and adds a motorsport aesthetic to your cabin without modification. Installation is straightforward using factory-approved automotive adhesive tape on the back. No drilling, no fasteners, no permanent modifications. The 150g component mounts flush against the OEM cup holder surround, creating a seamless integration that looks factory-delivered. ISO 9001 certified manufacturing ensures consistent quality and durability under daily use and temperature variation. What's Included 📦 Carbon Fiber Trim 1× rear seat cup holder cover moulding 🔗 Adhesive Tape Pre-applied automotive-grade tape on reverse 📋 Installation Guide Simple step-by-step fitting instructions ✓ Quality Guarantee ISO 9001 certified manufacturing Product Highlights Genuine carbon fiber construction for authentic motorsport appeal Direct fit for 2016–2018 Mercedes-Benz E-Class W213 rear seat Factory-matched geometry ensures flush, seamless installation Pre-applied automotive adhesive tape—no drilling or fasteners required Lightweight design at only 150g, zero impact on performance or dynamics ISO 9001 certified production for consistent quality and durability Temperature and moisture resistant for long-term cabin stability Transforms interior aesthetic without permanent modification Professional finish matches premium E-Class interior standards 30-day money-back guarantee on all Victorious products Compatibility Vehicle Model Year Range Fitment Mercedes-Benz E-Class Sedan W213 2016–2017 Direct Fit Mercedes-Benz E-Class Sedan W213 2018 Direct Fit Mercedes-Benz E-Class Coupe/Cabriolet W207 2009–2017 Not Compatible Mercedes-Benz C-Class W205 2015–2021 Not Compatible Installation Notes Difficulty: Beginner | Time: 5–10 minutes Prepare the surface. Open the rear doors and locate the existing cup holder cover trim on the rear seat backrest. Clean the area with a soft, dry cloth to remove dust and oils. Position the carbon fiber trim. Carefully align the new carbon fiber moulding against the OEM cup holder surround. Ensure all edges sit flush and match factory geometry. Apply pressure evenly. Press firmly across the entire surface for 15–20 seconds to activate the adhesive tape bond. Start from the center and work outward to avoid air pockets. Allow curing time. Leave the installation undisturbed for 24 hours before using the cup holders to ensure maximum adhesive strength. Final inspection. Verify that all edges are flush, the trim sits level, and no gaps exist between the carbon fiber and factory plastic surround. ⚠ Note: Do not stress the adhesive bond for 24 hours after installation. Avoid placing weight or pressure on the cup holder area during the curing period. In cold climates below 10°C, allow 48 hours for full adhesive set. Why Victorious? Own Your Interior. Own Your Story. Every detail matters when you're passionate about your Mercedes-Benz. This carbon fiber cup holder cover trim is engineered for drivers who refuse to compromise on quality, fit, or aesthetics. Upgrade your E-Class cabin today with confidence backed by our 30-day money-back guarantee and award-winning customer support. Add to Cart Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ☎ Expert support: +44 203 943 9919 💰 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz AG, Daimler, or any official Mercedes-Benz distributor. All vehicle names and trademarks are the property of their respective manufacturers. This product is designed for the W213 E-Class platform (2016–2018) and is sold for cosmetic enhancement purposes only.

Victorious · Mercedes-Benz · Exterior Trim Glossy Black ABS Chrome Fender Trim for Mercedes-Benz E-Class W213 & C-Class W205 Premium side fender trim upgrade that adds aggressive styling and seamless integration for modern Mercedes luxury saloons. W213 / W205 2016–2023 ABS Chrome E63s AMG Compatible Glossy Black Direct Fit Overview Designed specifically for the Mercedes-Benz E-Class W213 (2016–2023) and C-Class W205 platform, this two-piece glossy black ABS chrome fender trim set delivers a factory-finished upgrade that elevates your vehicle's presence. Compatible with E63s AMG variants, these trims integrate seamlessly with OEM body lines for a cohesive, premium aesthetic. Precision-engineered from high-quality ABS material with chrome detailing, this set offers exceptional durability against weather, UV exposure, and daily road use. The glossy black finish pairs beautifully with both light and dark paintwork, while the polished chrome accents add a touch of understated luxury that catches light beautifully. Installation is straightforward and non-invasive, requiring no drilling or permanent modification. Whether you're aiming for a subtle performance upgrade or planning a comprehensive exterior refresh, these fender trims are a game-changer for discerning Mercedes enthusiasts. What's Included 🎨 2 × Side Fender Trims Left and right, glossy black finish ✓ Chrome Detail Accents Pre-installed, factory appearance 📋 Model Code LLK2293 – verified fitment ⚖️ Total Weight 200g – lightweight, no stress on body Product Highlights Precision-engineered for W213 and W205 platform fitment High-quality ABS material with exceptional durability Glossy black finish resists fading and UV damage Chrome detailing adds premium aesthetic depth Compatible with E63s AMG and base model variants Non-invasive installation – no drilling required Factory-finished appearance, OEM-style integration Lightweight design at 200g per set Enhanced side profile and aggressive styling 30-day money-back guarantee on all purchases Compatibility Model Generation Year Range Status Mercedes-Benz E-Class W213 2016–2023 Direct Fit Mercedes-Benz E63s AMG W213 2016–2023 Direct Fit Mercedes-Benz C-Class W205 2016–2023 Direct Fit Pre-2016 E-Class W212 –2015 Not Compatible Post-2023 E-Class W214 2024+ Not Compatible Note: Always verify your vehicle's model year and generation code before ordering. Check your registration document or contact us at +44 203 943 9919 if unsure. Installation Guide Difficulty: Moderate | Time: 30–45 Minutes per Side Clean the fender area thoroughly with soapy water and dry completely. Test-fit both trims on the vehicle to confirm alignment and body contours. Mark adhesive tape positions lightly with a marker for reference. Remove backing from 3M automotive-grade adhesive tape (pre-applied). Carefully align the trim to the fender edge and press firmly along the entire length. Apply additional pressure at corners and edges for 60 seconds to ensure grip. Allow 24 hours of curing time before exposure to moisture or car wash. Inspect all seams and edges for gaps; re-press if necessary. Important: Professional installation is highly recommended. Improper application may affect fitment. If uncertain, contact a certified Mercedes specialist or reach out to our team for installer recommendations in your region. Why Choose Victorious for Your Mercedes? We specialise in premium exterior and performance upgrades for luxury and adventure vehicles. Every product is tested for fitment accuracy, material longevity, and visual impact. We're trusted by thousands of enthusiasts worldwide—4.9/5 stars from over 12,300 verified reviews. Our 30-day money-back guarantee means you can buy with complete confidence. If these trims don't meet your expectations, we'll refund you in full, no questions asked. Ready to Upgrade Your Mercedes? Add these glossy black fender trims to your cart today and transform your E-Class or C-Class into the head-turner you know it can be. Shop Now Use code 22GET20 for 20% off when you buy any 2 items ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ 4.9★ Trusted 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, Daimler AG, or Jaguar Land Rover Limited. All references to vehicle models, generation codes, and trademarks are used for identification and compatibility purposes only. Product descriptions are based on manufacturer specifications and customer feedback. Always verify compatibility with your specific vehicle before purchase.

Victorious · Mercedes-Benz · Interior Trim ABS Chrome Side Air Conditioning Vent Trim Cover for Mercedes-Benz E-Class W213 Elevate your cabin aesthetics with premium carbon fiber vent rings—sophisticated detailing that transforms your E-Class interior. W213 2016–2017 Carbon Fiber ABS Adhesive Installation Lightweight Design Overview Mercedes-Benz E-Class W213 owners know the value of thoughtful interior refinement. Your cabin is where you spend every journey, and every detail matters. These ABS Chrome Side Air Conditioning Vent Trim Covers deliver the premium finish your E-Class deserves—a subtle yet impactful upgrade that signals attention to quality. Designed specifically for 2016–2017 E-Class models, these vent rings feature authentic carbon fiber detailing combined with chrome accents. The lightweight ABS plastic construction ensures durability without adding weight, while the sleek profile complements OEM styling. Installation is straightforward using automotive-grade adhesive tape, requiring no tools or modifications to your vehicle. Why these covers work: They fill the visual gap in your climate control zone with a cohesive, luxury aesthetic. The carbon fiber finish pairs beautifully with modern dashboard trim, while the chrome elements catch light and add depth. For owners who value understated elegance, this is the detail that transforms your interior. What's Included 📦 Vent Ring Cover Set Complete set of side AC vent trim covers ✦ Adhesive Tape Pre-applied automotive-grade installation tape 📋 Instructions Step-by-step installation guide included Product Highlights Carbon fiber finish with premium lustre and authentic texture Chrome accents for sophisticated visual contrast and light reflection Lightweight ABS plastic construction—durable and impact-resistant Pre-applied adhesive tape for tool-free installation in under 5 minutes Precision fit for 2016–2017 E-Class W213 models ISO9001 certified manufacturing for quality assurance No drilling, cutting, or OEM modification required Complements factory climate control design seamlessly Resistant to fading and UV exposure 30-day money-back guarantee—risk-free upgrade Compatibility Model Year Range Engine Compatibility Mercedes-Benz E-Class W213 2016–2017 All Direct Fit Mercedes-Benz E-Class W213 2018+ All Check Fitment E-Class W212 (Pre-2016) 2009–2015 All Not Compatible Other Mercedes Models — — Not Compatible Installation Difficulty Level: Beginner | Time: 5 minutes Prepare surfaces: Clean and dry both the vent ring area and the back of the cover with a soft cloth. Remove any dust or residue. Test fit: Position the cover over the vent opening to confirm alignment before removing adhesive backing. Apply cover: Peel back the adhesive tape and press the cover firmly into place, starting from the centre and working outward to avoid air bubbles. Secure: Apply even pressure across the entire surface for 10–15 seconds to ensure a permanent bond. Cure: Allow 24 hours before adjusting your climate control vents to let adhesive fully set. ⚠ Important: Ensure the surface is completely clean and dry before installation. Do not install in cold conditions (below 10°C) as adhesive performance may be compromised. If repositioning is needed, gently peel away and reapply to a clean surface. Upgrade Your E-Class Interior Today Transform your cabin with these premium carbon fiber vent covers. A small detail. A significant upgrade. Experience the Victorious difference. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day guarantee – risk-free returns ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or Jaguar Land Rover. All brand names and trademarks are the property of their respective owners. Product descriptions, compatibility, and fitment information are provided for reference only. Always verify fitment with your vehicle's specific VIN or consult a qualified technician before purchase. Victorious Automotive assumes no liability for improper installation or use.

Victorious · Mercedes-Benz · Interior Trim Chrome AC Vent Trim Cover for Mercedes-Benz E-Class W213 (2016–2017) Elevate your dashboard with precision-engineered matte chrome accents that blend German engineering refinement with contemporary design. W213 2016–2017 ABS Chrome Matte Finish Direct Fit ISO9001 Overview The Mercedes-Benz E-Class W213 represents the pinnacle of luxury sedan design. Between 2016 and 2017, Mercedes refined the W213 platform with meticulous attention to interior detail—and this chrome AC vent trim cover completes that vision. Whether you drive the E200L, E300L, or another W213 variant, this accent elevates your dashboard with understated elegance. Crafted from premium ABS chrome with a contemporary matte finish, this trim cover transforms your air conditioning vents from utilitarian to intentional. The finish resists fingerprints and maintains its luster through years of daily use. Every edge is precision-cut for a flawless fit that requires no modification to your existing dashboard. Unlike aftermarket trim that clashes with factory design language, this cover honors Mercedes's commitment to cohesive aesthetics. ISO9001 certification ensures consistent quality across every unit produced. What's Included ✦ Dashboard AC Outlet Cover LLK96 Model · Matte Chrome Finish Product Highlights Premium ABS chrome construction engineered for durability Matte chrome finish resists fingerprints and oxidation Precision-cut for direct fit on 2016–2017 W213 models Compatible with E200L, E300L, and select E-Class variants ISO9001 certified manufacturing process Contemporary design complements factory dashboard aesthetics Lightweight at just 50g—negligible impact on vehicle dynamics Easy installation requiring only hand tools Long-lasting finish maintains appearance through daily use Adds subtle premium accent without aggressive modification Compatibility Model Year Compatibility E200L 2016–2017 Direct Fit E300L 2016–2017 Direct Fit E350 2016–2017 Direct Fit E400 2016–2017 Direct Fit W213 (Pre-2016) 2015 & Earlier Not Compatible W213 (Post-2017) 2018+ Not Compatible Always verify your model year and series against your V.I.N. before purchase. Installation Notes Difficulty: Beginner | Time: 10–15 Minutes Ensure the vehicle is parked on a level surface with the engine off and cool to the touch. Locate the air conditioning vents on your dashboard (driver and passenger sides). Gently insert a trim removal tool or soft plastic card into the seam between the existing vent trim and the dashboard. Apply gradual, even pressure to release the existing trim clips without forcing. Once removed, clean the mounting area with a microfiber cloth to eliminate dust and residue. Align the new chrome vent cover with the mounting points and press firmly until you hear or feel the clips lock into place. Verify the cover is seated evenly and does not rock or shift when gently pressed. Note: Professional installation is strongly recommended if you are unfamiliar with interior trim removal. Improper installation may damage your dashboard. Ready to Refine Your W213? This chrome AC vent trim is the finishing touch for owners who demand cohesion between factory design and thoughtful upgrades. Add it today and experience the subtle luxury that sets your E-Class apart. Shop Now Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Mercedes-Benz, Daimler, or any official Mercedes manufacturer. All product names, logos, and brands are the property of their respective owners. Product compatibility is based on research and customer feedback; always verify fitment before purchase.

Premium Accessories · BMW 5 Series · Interior Storage BMW 5 Series G30/G38 Front Console Storage Box (2017–2018) Premium-grade interior organization that transforms your dashboard with seamless, custom-fit storage. G30/G38 2017–2018 High-Grade Plastic Direct Fit ISO9001 Certified 300g Lightweight Overview The BMW 5 Series G30 and G38 (2017–2018) deserves interior detailing that matches its engineering precision. This front console storage box transforms wasted dashboard space into functional, accessible storage—keeping phone chargers, sunglasses, and small essentials within arm's reach without cluttering your cabin. Engineered from premium-grade plastic and ISO9001 certified for durability, this storage solution integrates perfectly with your 5 Series' interior design language. At just 300g, it adds zero perceptible weight while maximizing every inch of usable space. Installation is tool-free and reversible—no drilling, no permanent modification. For owners who demand OEM-level fit and finish, this console box is the understated upgrade that rewires your daily experience. It's the kind of detail that catches your own eye every time you sit behind the wheel. What's Included 📦 Console Storage Box Custom-molded for G30/G38 fitment ✓ Ready to Install No tools or modifications required Product Highlights ISO9001 certified manufacturing for quality assurance Engineered for BMW 5 Series G30 and G38 models only Premium plastic construction—rigid yet lightweight Direct-fit integration without cutting or drilling Maximizes wasted dashboard storage real estate Effortless installation and removal Designed for daily organizational demands Maintains original interior aesthetics Perfect for small items: keys, coins, cables, sunglasses Model: llk992 — premium specification Compatibility Model Years Fit Status BMW 5 Series G30 2017–2018 Direct Fit BMW 5 Series G38 2017–2018 Direct Fit BMW 5 Series (Other gens) Before 2017 / After 2018 Not Compatible Compatibility note: This box is precision-engineered for G30/G38 models (2017–2018 only). Verify your vehicle's generation before purchase. Other 5 Series generations have different console geometries. Installation Notes Difficulty: Beginner | Time: 5 minutes Open your center console and locate the designated storage cavity Align the storage box with the opening—no force required Gently press downward until it seats flush with the surrounding trim Test by opening and closing the console—movement should be smooth No adhesive, fasteners, or tools needed Tip: If removal is ever needed, simply lift straight up. The box is fully reversible with zero permanent changes to your vehicle. Complete Your 5 Series Interior Premium storage shouldn't require compromise. This console box brings OEM-grade integration to your G30/G38, keeping your cabin organized, your essentials accessible, and your design language intact. One small detail. One significant difference. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 Stars · 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide Shipping via DHL, FedEx, UPS +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW distributor. All vehicle references are for fitment compatibility only.

BMW · 5 Series G30 · Interior Trim Silver Air Conditioning Vent Trim for BMW 5 Series G30 (2018–2019) Elevate your cabin aesthetics with premium matt silver AC vent trim engineered for seamless fit and lasting durability. G30 2018–2019 ABS Plastic Matt Silver Direct Fit Overview The BMW 5 Series G30 (2018–2019) demands interior accessories that match its refined engineering and premium aesthetic. This Silver AC Vent Trim is precisely engineered to integrate seamlessly with your cabin's climate control surround, replacing OEM trim with a more sophisticated matt silver finish that catches light without gloss distraction. Machined from high-grade ABS plastic and ISO9001-certified for durability, this trim piece resists UV degradation, thermal stress, and the micro-abrasion that comes from years of cabin climate changes. The matt silver colorway complements both light and dark interiors, working with everything from tan leather to carbon fiber accents. Installation is straightforward—no drilling, no modifications to your dashboard. This is the kind of detail upgrade that separates carefully maintained examples from the rest: visible proof that you care about your interior as much as your performance specs. What's Included 🎨 AC Vent Trim Surround Matt silver ABS plastic, precisely fitted ✓ Pre-Tested Fit Quality-assured and ready to install Product Highlights Precisely engineered for BMW 5 Series G30 (2017–2019) compatibility Premium matt silver finish for sophisticated cabin upgrade High-grade ABS plastic ensures durability and thermal stability ISO9001-certified manufacturing standards Lightweight design at just 50g—no impact on weight distribution Direct fit—no modifications or drilling required Resistant to UV fading and temperature cycling Complements both light and dark interior color schemes Easy installation integrates with existing interior components Ideal companion to other G30 interior refinements Compatibility Model Generation Year Range Status BMW 5 Series G30 2017–2019 Direct Fit BMW 5 Series G30 LCI 2020+ Not Compatible BMW 5 Series F10/F11 2010–2017 Not Compatible Please verify your vehicle's model year and generation before ordering. Fitment is guaranteed only for 2017–2019 G30 models without aftermarket dashboard modifications. Installation Notes Difficulty Level: Easy | Time: 10–15 minutes Power off the vehicle and allow the cabin to cool to room temperature. Locate the AC vent surround trim on your dashboard center stack. Using a soft plastic trim removal tool, gently pry the existing trim away from its mounting points. Work methodically to avoid cracking. Disconnect any integrated switches or controls if present on your trim variant. Clean the mounting surface with a microfiber cloth and isopropyl alcohol. Allow to dry completely. Align the new Silver AC Vent Trim with the mounting points and press firmly until all clips engage. Reconnect any integrated controls and verify that the trim sits flush with the surrounding dashboard. Start the vehicle and test climate control function to confirm proper reassembly. Note: If your trim includes integrated controls, photograph connector positions before removal. Forcing connections can damage control modules. Ready to Refine Your G30? Small details define ownership. This Silver AC Vent Trim is the kind of upgrade that reminds you—every time you adjust climate control—that you drive a car worth caring for. Add to Cart Apply code at checkout: 22GET20 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ Expert support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke AG, or any subsidiary thereof. All trademarks, logos, and brand names are the property of their respective owners. This product is designed for compatibility with the specified vehicle model only.

BMW · 5 Series G30 · Interior Trim BMW 5 Series Carbon Fiber Center Console Mode Button Cover Trim Elevate your center console with premium carbon fiber that adds motorsport-grade sophistication to your G30's cockpit. G30 / G31 2017–2023 Carbon Fiber LHD Pre-Adhesive ISO9001 Certified Overview The BMW 5 Series G30 is a benchmark for executive driving—refined, precise, and built for those who notice every detail. Your center console deserves finishes that match that commitment. This premium carbon fiber mode button cover panel trim replaces the factory plastic surround with genuine visual and tactile upgrade. Weighing just 100g and engineered to OEM fitment specs, it integrates seamlessly with your cabin's ergonomics while adding that unmistakable carbon weave texture. Pre-applied automotive adhesive tape means installation is effortless—no drilling, no permanent modifications. Just clean, position, and secure. The result is a center console that looks workshop-fresh and feels intentional. What's Included ◆ Carbon Fiber Mode Button Cover Pre-cut, pre-adhesive, ready to fit 📋 Installation Guide Step-by-step instructions included ✓ Quality Certificate ISO9001 certified manufacturing Product Highlights High-grade carbon fiber weave with protective UV-resistant clear coat Custom-engineered fit for G30 / G31 center console geometry Pre-applied 3M automotive-grade adhesive tape for secure, tool-free installation Weighs just 100g—no impact on vehicle dynamics or suspension ISO9001 certified manufacturing ensures quality control and durability Non-invasive design—fully reversible if desired Dimensions: 35cm × 10cm × 8cm (fits standard LHD consoles) Resistant to temperature fluctuation and UV fade Complements OEM trim upgrades and bespoke interior packages Model reference: LLK1481 (direct fitment assurance) Compatibility Model Generation Year Range LHD Fit Status BMW 5 Series G30 Sedan 2017–2023 Yes Direct Fit BMW 5 Series G31 Touring 2017–2023 Yes Direct Fit BMW 5 Series G30 / G31 RHD Versions No Not Compatible BMW 7 Series G11 / G12 2015–2023 Yes Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Prepare the surface: Use a microfiber cloth and isopropyl alcohol to clean the existing center console mode button surround. Allow to dry completely (2–3 minutes). Peel backing: Carefully remove the protective backing from the pre-applied adhesive tape on the carbon fiber panel. Position carefully: Align the trim panel with the factory surround, starting from one edge and working slowly across to avoid air bubbles. Apply pressure: Once positioned, press firmly and evenly across the entire surface for 30 seconds to activate the adhesive bond. Final check: Verify all edges are seated and the trim sits flush with the console. Allow adhesive 24 hours to cure before heavy use. Note: Do not force fit. If the panel feels misaligned, carefully peel back and reposition. The pre-adhesive allows repositioning if done within the first minute of contact. Why Choose This Trim Carbon fiber isn't just aesthetics—it's a statement of intent. It says your 5 Series deserves finishes that reflect its engineering precision. This cover transforms a utilitarian plastic panel into a detail that elevates every drive, whether you're daily-driving or weekend touring. And because it's reversible, you're investing in an upgrade that travels with your vehicle, not against it. Ready to Upgrade Your Center Console? Add that workshop-grade carbon fiber detail to your G30. Order now and experience the difference quality trim makes. Add to Cart Use code 22GET20 for 20% off when you add 2 items to your cart. 4.9/5 — 12,300+ verified reviews 🌍 Worldwide shipping — DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to BMW Group, Bayerische Motoren Werke AG, or Jaguar Land Rover Limited. All vehicle names, logos, and brands are the property of their respective owners. This product is an aftermarket accessory designed for fitment compatibility only.

Automotive · BMW · Interior Trim Carbon Fiber Rear AC Vent Trim for BMW 5 Series G30 Elevate your 5 Series interior with authentic carbon fiber styling and seamless direct fit installation. BMW G30 2018–2023 ABS Carbon Fiber Rear AC Vent Plug & Play Overview The BMW 5 Series G30 is engineered for sophistication, and every detail matters. This Carbon Fiber Rear AC Vent Trim replaces the factory plastic surround with a high-grade ABS plastic shell finished in authentic carbon weave, adding premium visual depth and contemporary sportiness to your cabin. Lightweight yet durable, this trim is ISO9001 certified for quality assurance and installs in under 5 minutes using automotive-grade adhesive tape. No drilling, no trim removal required—a genuine direct-fit upgrade that transforms the rear climate control area from utilitarian to aspirational. Perfect for owners who demand cohesion between their vehicle's engineering excellence and its aesthetic presence. Whether you're building a full carbon fiber interior package or starting with a single standout accent, this piece delivers authentic motorsport styling without compromise. What's Included 📦 Carbon Fiber AC Trim Single piece, pre-cut for G30 🔧 Pre-Applied Adhesive Tape 3M automotive-grade backing 📋 Installation Guide Visual step-by-step instructions ✓ Quality Guarantee 30-day money-back assurance Product Highlights ISO9001 certified manufacturing quality control Authentic carbon fiber weave finish Direct fit for 2018–2023 BMW 5 Series G30 Pre-applied adhesive tape—no tools required Lightweight ABS construction (46g total weight) Durable and long-lasting material composition Seamless integration with factory interior design Professional motorsport aesthetic impact No drilling, cutting, or modification needed Complements full carbon fiber interior packages Compatibility Vehicle Model Year Range Fit Status BMW 5 Series G30 2018–2023 Direct Fit BMW 5 Series G31 (Touring) 2018–2023 Direct Fit BMW 5 Series F10/F11 2010–2017 Not Compatible BMW 5 Series G60 (New) 2024+ Not Compatible BMW 7 Series G11/G12 2016–2023 Not Compatible Installation Difficulty Level: Beginner | Time: 5 minutes Prepare the Surface: Clean the rear AC vent surround thoroughly with a microfiber cloth. Ensure all dust, debris, and oils are removed. Allow to air dry completely for 2 minutes. Position the Trim: Carefully align the carbon fiber trim with the factory vent opening. Check fitment from all angles before proceeding. Apply Adhesive: Peel back the protective film from the pre-applied adhesive tape on the back of the trim. Press firmly into place, starting from the center and working outward to avoid air bubbles. Secure & Set: Apply consistent downward pressure for 30 seconds. Allow the adhesive to cure for 24 hours before using climate controls in that area. Final Check: Verify all edges are flush and secure. The trim should sit perfectly flush with the factory panel. Note: Do not operate the AC vent for 24 hours after installation. Ensure the installation surface is completely clean and dry—any residual moisture or contaminants will compromise adhesion. Complete Your G30 Interior Carbon fiber detailing elevates the driving experience—it's not just visual, it's tactile proof of engineering excellence. Add this rear AC vent trim to your collection today and join thousands of BMW enthusiasts who demand premium finishes. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with, endorsed by, or manufactured by BMW Group, Bayerische Motoren Werke AG, or any official BMW subsidiary. All trademarks and brand names remain the property of their respective owners. Product compatibility is verified for 2018–2023 BMW 5 Series G30 models; always confirm your specific vehicle variant before purchase.

Victorious · BMW · Interior Trim BMW 5 Series G30 Carbon Fiber Style Door Lock Cover Trim Premium ABS trim with carbon fiber finish elevates your 5 Series G30 interior with contemporary styling and precision fit. G30 2017–2019 Carbon Fiber ABS Material Door Locks Plug & Play Overview The BMW 5 Series G30 (2017–2019) represents one of BMW's most refined expressions of modern luxury and engineering. Its thoughtfully appointed interior deserves components that honour that standard—and this Carbon Fiber Style Door Lock Cover Trim delivers exactly that. This set of four trim pieces transforms the appearance of your door lock bezels with a contemporary carbon fiber aesthetic. Manufactured from premium ABS material, each cover is engineered to integrate seamlessly with your G30's existing door furniture, creating a cohesive, modern look that complements both the stock design language and any interior upgrade path you choose. Installation is straightforward via automotive-grade adhesive tape, requiring only surface preparation and careful alignment. Once installed, these trims appear factory-fitted and resist the wear, UV degradation, and thermal cycling common to interior plastics—ensuring your investment remains visually sharp for years of daily driving. What's Included 🎯 Door Lock Covers (×4) One per door, carbon fiber finish 🔧 Adhesive Tape Pre-applied or included separately 📋 Installation Guide Step-by-step instructions included ✓ Quality Assurance ISO9001 certified manufacturing Product Highlights Premium carbon fiber appearance for contemporary interior aesthetics Durable ABS material resists cracking, warping, and UV degradation Precision fit engineered specifically for G30 door lock bezels Quick, tool-free installation using automotive adhesive tape Factory-finished edges and flush alignment when installed correctly Lightweight design—no impact on door mechanisms or electronics ISO9001 certified for consistent quality and durability Complements both stock and upgraded interior trim packages Covers four doors; one complete interior set included Cures to maximum bond strength within 24 hours of installation Compatibility Model Year Range Generation Compatibility BMW 5 Series 2017–2019 G30 Direct Fit BMW 5 Series 2020+ G30 (LCI) Not Compatible BMW 5 Series 2009–2016 F10 / F11 Not Compatible BMW 7 Series All Years Various Not Compatible Installation Notes Difficulty Level: Easy | Estimated Time: 15–20 minutes Prepare the surface: Clean each door lock bezel thoroughly with mild soap and water, then dry completely. Use isopropyl alcohol on a cloth to remove any residual oils or contaminants. Test fit: Without removing the adhesive backing, position each trim cover on its corresponding lock bezel to confirm alignment and fit. Remove backing: Carefully peel away the adhesive tape backing, starting from one corner. Apply trim: Press the cover firmly onto the lock bezel, applying steady pressure across the entire surface for 30 seconds per piece. Cure time: Allow the adhesive to cure for 24 hours before adjusting door locks or exposing the trims to moisture or direct sunlight. Important: Do not operate door locks excessively during the first 24 hours after installation. Ensure adequate ventilation and temperature stability (16–25°C) during curing. If adhesive fails to cure properly, surface contamination is the most common cause—repeat cleaning steps and try again. Complete Your 5 Series G30 Interior Upgrade your BMW with interior trim that matches the precision engineering BMW owners expect. These carbon fiber door lock covers are the perfect starting point for a cohesive, modern cabin refresh—or the ideal complement to a larger interior customisation project. Shop Now Use code 22GET20 for 20% off any 2 items—add another G30 trim to your order and save. 4.9★ 12,300+ Verified Reviews ✓ 30-Day Money-Back Guarantee ✈ Worldwide Shipping via DHL, FedEx, UPS 📞 Expert Support: +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke AG, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility information is provided for reference only; always verify fitment with your specific vehicle before purchase. This product is an aftermarket accessory and is not an OEM component.

BMW · 5 Series G30 · Interior Trim BMW 5 Series G30 ABS Carbon Fiber Interior Trim Kit with Chrome Accents Elevate your G30 cabin with premium carbon fiber styling and precision-fit chrome trim details. G30 2017–2018 ABS Carbon Fiber Chrome Accents Full Interior Set Overview The BMW 5 Series G30 (2017–2018) represents a pinnacle of executive German engineering. This generation demands interior detailing that matches its sophistication—which is precisely what this ABS Carbon Fiber Interior Trim Kit delivers. Every piece is engineered to complement the G30's minimalist, tech-forward cabin design. Our full trim kit replaces factory moldings with carbon fiber-style ABS components accented with chrome finishes. The finish is indistinguishable from genuine carbon at close range, delivering that modern motorsport aesthetic without the premium price tag or installation complexity. ISO9001-certified production ensures every piece meets automotive durability standards. Installation is straightforward thanks to pre-applied automotive adhesive tape. Most owners complete the job in under an hour without specialist tools. The result: a cabin that feels refreshed, contemporary, and unmistakably premium. What's Included 🎨 Carbon Fiber Trim Pieces Complete molding set for dashboard and interior panels ✨ Chrome Accents Integrated chrome highlights on key trim edges 🔧 Adhesive Installation Pre-applied automotive-grade adhesive tape 📋 Fitment Documentation Model LLK1191 with placement guide Product Highlights Premium carbon fiber-style finish with authentic texture Lightweight ABS construction resists cracking and warping Chrome-accented edges add sophisticated contrast Pre-applied automotive adhesive—zero additional materials needed ISO9001 certified for consistent quality Designed specifically for G30 cabin geometry Non-permanent installation—fully reversible Resistant to UV fading and temperature extremes Professional finish indistinguishable from factory upgrades Full interior trim coverage in one kit Compatibility Model Year Generation Fitment 2017 G30 (5th Gen) Direct Fit 2018 G30 (5th Gen) Direct Fit 2019+ G30 (Updated) Check Before Order F10 / F11 Previous Gen Not Compatible Note: 2019+ G30 models may have revised dashboard geometry. Confirm your vehicle's production date before ordering. Contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) if unsure. Installation Difficulty Level: Beginner | Time: 45–60 minutes Clean all interior trim surfaces with mild soap and water. Dry completely with microfiber cloth. Wipe surfaces with isopropyl alcohol to remove residual oils and ensure adhesive bonding. Identify trim piece locations using the included fitment guide. Start with largest dashboard panels. Carefully peel backing from adhesive tape and align first piece precisely. Press firmly for 10 seconds. Work systematically around cabin, maintaining consistent pressure on each piece. Allow 24 hours for full adhesive cure before aggressive cleaning or temperature extremes. Important: Do not apply trim pieces in direct sunlight or environments below 10°C. Adhesive requires moderate warmth to cure properly. If pieces shift during installation, carefully lift and reposition within the first 5 minutes. Transform Your G30 Cabin Today This trim kit is the fastest way to deliver modern, premium aesthetics to your 5 Series interior. No drilling, no permanent modifications—just instant cabin elevation. Shop Interior Trim Kits Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars • 12,300+ reviews 🚚 Worldwide shipping • DHL, FedEx, UPS, TNT ✅ 30-day returns • Money-back guarantee 📞 Expert support • +44 203 943 9919 Disclaimer: Victorious Automotive is an independent specialist retailer and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW distributor. All product names, logos, and trademarks are the property of their respective owners. This product is designed for aesthetic customization only and does not modify vehicle performance or safety systems.

Victorious · BMW · Exterior Trim Gloss Black ABS Door Side Strips Cover Trim for BMW 5 Series G30 Premium ABS plastic door edge protection with aggressive styling for your 2017–2019 G30. G30 2017–2019 ABS Plastic Gloss Black Door Protection Easy Install Overview The G30 5 Series is built for refinement, but the door edges remain vulnerable to parking lot dings and daily wear. These Gloss Black ABS side strips deliver both protection and aggression—covering vulnerable door edges with sleek, modern bodywork detailing that complements the G30's proportional design language. Manufactured from ISO9001-certified ABS plastic, these trims are rigid enough to absorb minor impacts while flexible enough to accommodate the G30's body contours. The gloss black finish integrates seamlessly with factory trim or contrasts beautifully against metallic paint for added visual depth. Installation is straightforward, requiring no cutting, drilling, or permanent modification to your vehicle. Adhesive backing ensures a secure, long-lasting bond that won't creep or lift. What's Included 📦 Door Side Strips Set Complete front and rear trim pieces 📖 Installation Guide Step-by-step photo instructions ✦ Pre-Applied Adhesive Factory-grade backing tape Product Highlights ISO9001-certified ABS plastic for durability and UV resistance Gloss Black finish with hard-wearing surface coating Custom-fit design for BMW G30 2017–2019 models Prevents door edge dings, scuffs, and paint damage Pre-applied industrial adhesive backing for secure bond No drilling, cutting, or modification required Lightweight construction at 1.4kg total weight Maintains factory appearance when properly installed Professional-grade finish for showroom quality Compatible with all G30 trim levels and paint finishes Compatibility Model Years Compatibility BMW 5 Series G30 2017–2019 Direct Fit BMW 5 Series G30 (2020+) 2020–Present Not Compatible BMW 5 Series F10 2010–2017 Not Compatible BMW M5 G30 2017–2019 Direct Fit Tip: Confirm your model year and body style before ordering. G30 sedans and Gran Tourismo variants use identical door strips. Installation Difficulty: Beginner | Time: 20–30 mins per side Prepare the surface: Thoroughly clean all door edges with isopropyl alcohol. Dry completely and allow 15 minutes for any residual moisture to evaporate. Dry-fit the trim: Remove backing tape from one strip and position along the door edge. Ensure alignment and proper fit before final adhesion. Apply the trim: Peel away backing tape fully. Press the strip firmly onto the door edge, working from top to bottom to eliminate air bubbles. Set the adhesive: Allow 24 hours before exposing the trim to moisture or high heat. Repeat for all edges: Follow the same process for remaining door edges and trim locations. Warning: Do not wash your vehicle for 48 hours after installation. Adhesive requires full cure time for maximum durability. Ready to Protect Your G30? These ABS door trims combine genuine protection with understated aggression. Add them to your cart today and complete your G30's exterior detailing. Add to Cart Use code 22GET20 for 20% off when you add any 2 items. 4.9/5 · 12,300+ reviews ✦ 30-day money-back guarantee ✦ Worldwide shipping via DHL ✦ +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessories manufacturer and retailer. We are not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke AG, or any official BMW dealer. All product names, logos, and vehicle designations are used for identification and compatibility purposes only.