Toyota Land Cruiser LC250 Accessories

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Steering Wheel Insert for 2024 Toyota Land Cruiser 250 – Carbon Fibre & Silver Matte A precision-fit decorative insert that elevates the LC250's steering wheel with a premium carbon fibre or silver matte finish — no tools, no compromise, no trace of the original surface left unprotected. LC250 2024 Land Cruiser ABS Material Carbon Fibre Pattern Silver Matte Tool-Free Install Interior Upgrade Direct Fit Overview The 2024 Toyota Land Cruiser 250 represents a significant new chapter for one of the most respected off-road nameplates in history. With its redesigned interior placing greater emphasis on a refined, driver-focused cockpit, the LC250 cabin deserves accessories that match its ambition. The steering wheel sits at the heart of the driving experience, and its visual presence matters — especially when you spend hours behind it on long-distance touring or technical off-road terrain. This steering wheel insert has been developed specifically for the 2024 LC250, wrapping around the appropriate trim sections with an exact contour fit. Available in two finishes — a deep-weave carbon fibre pattern and a clean silver matte — the insert introduces a visual premium that the stock plastic trim simply cannot deliver. Both finishes are designed to complement the LC250's existing interior palette without clashing or looking aftermarket in the wrong way. Constructed from durable ABS with a hardwearing surface coating, this insert resists scratching, UV fading and daily contact wear. It applies via a clean adhesive bond directly to the original trim surface, leaving no permanent marks if removed. For LC250 owners who want an immediate interior upgrade that's reversible, refinished and ready in minutes, this is the most efficient starting point. What's Included 🎯 Steering Wheel Insert × 1 Precision-fit for 2024 Toyota Land Cruiser 250 🧽 Adhesive Pre-Applied Ready to install straight from the packaging 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Designed exclusively for the 2024 Toyota Land Cruiser 250 — precise contour fit with no gaps or overhang Available in Carbon Fibre Pattern and Silver Matte for two distinct interior aesthetics Premium ABS construction delivers rigidity without adding bulk to the steering wheel Surface coating resists scratching, UV exposure and everyday contact abrasion Adhesive installation requires no drilling, clipping or modification to OEM components Fully reversible — removes cleanly without damaging the original steering wheel trim Maintains airbag system integrity — no interference with safety components Adds genuine visual depth and finish quality to the LC250 cockpit environment Lightweight profile ensures no change to steering feel, balance or ergonomics Pairs seamlessly with other LC250 interior trim upgrades for a cohesive cabin finish Compatibility Vehicle Year Range Trim / Grade Fitment Toyota Land Cruiser 250 (LC250) 2024 All Grades (GX, VX, GR Sport) Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Grades Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Grades Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Park the vehicle safely, turn off the ignition and allow the interior to reach ambient temperature — avoid fitting in extreme cold or heat. Thoroughly clean the steering wheel trim surface using an isopropyl alcohol wipe or clean microfibre cloth. Ensure the area is completely dry and free from dust, oils or residue. Dry-fit the insert against the steering wheel without removing the adhesive backing. Confirm the alignment and contour match before proceeding. Peel back the adhesive protective liner carefully, taking care not to touch the adhesive surface. Align the insert precisely with the steering wheel trim contour, beginning from one end and pressing firmly along the length to eliminate any air gaps. Apply firm, even pressure across the entire insert surface for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 2 hours before normal use to let the adhesive bond cure fully — avoid touching or flexing the insert during this period. ⚠ Important: Do not apply the insert over cracked, peeling or damaged original trim. Surface contamination from polish, wax or silicone-based products will significantly reduce adhesive performance. If in doubt, wipe again with isopropyl alcohol before fitting. Upgrade Your LC250 Interior Today This steering wheel insert is part of our curated Toyota Land Cruiser LC250 interior collection — all designed to the same standard of fit and finish. Browse the full range or get in touch with our team if you need advice on pairing accessories. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Product images are for illustrative purposes — always verify fitment against your specific vehicle configuration before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Trunk & Cargo Retractable Trunk Cargo Cover & Curtain Partition for Toyota Land Cruiser 250 Prado LC250 (2024–2025) A precision-engineered retractable cargo cover that conceals your LC250's boot contents, blocks UV exposure, and integrates seamlessly into the vehicle's original trim — no gaps, no compromise. LC250 2024–2025 Retractable Cover Aluminium Alloy Frame Textured Canvas UV Protection No-Drill Fit Black / Fibre Pattern Direct Fit Overview The 2024 Toyota Land Cruiser 250 Prado is a vehicle built for those who refuse to compromise — combining genuine off-road capability with a cabin that competes at the premium end of the SUV spectrum. Whether it's navigating rugged terrain or carrying gear for extended overland trips, the LC250's cargo area works hard. Keeping that space organised and secure is not a luxury; it's a practical necessity for owners who use their vehicles as intended. This retractable trunk cargo cover has been engineered specifically for the LC250's boot geometry, making use of the factory side notches for a flush, gap-free installation. The cover extends and retracts on a smooth mechanism, allowing full or partial coverage depending on your load. When not in use, it tucks away cleanly without raising the boot floor or interfering with the vehicle's original headroom. Two finish options — Matte Black and Fibre Pattern — ensure it complements the interior's aesthetic rather than clashing with it. Constructed from a thickened aluminium alloy rail system paired with a durable textured canvas surface, this is not a lightweight aftermarket attempt. The material combination provides genuine rigidity when extended, effectively shielding items from view and from direct sunlight — reducing interior heat and protecting sensitive cargo. For LC250 owners who carry valuables, camera equipment, or simply prefer a tidy boot presentation, this cover delivers on every count. What's Included 📦 Retractable Cargo Cover 1× full-width unit with aluminium alloy frame and canvas surface 🔩 Mounting Hardware All required fixings for side-notch installation included 📋 Installation Guide Step-by-step instructions for a straightforward fit Product Highlights Direct-fit design engineered specifically for the 2024–2025 LC250 Prado Shields cargo from UV radiation to protect sensitive items and reduce heat build-up Conceals personal belongings, valuables, and equipment from prying eyes Smooth retractable mechanism extends and retracts with minimal effort Thickened aluminium alloy rail provides structural rigidity when deployed Textured canvas surface is durable, wipe-clean, and premium in finish Maintains the boot's original headroom — no raised floor height Seamless side-notch integration leaves no visible gaps in the trim Available in Matte Black and Fibre Pattern to suit interior preference No permanent modifications required — preserves factory interior integrity Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 Prado LC250 2024 – 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021 – 2025 Not Compatible Toyota Land Cruiser 200 LC200 2008 – 2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009 – 2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Remove any existing cargo tray liners or loose items from the boot area to ensure a clear working space. Identify the factory side notches located on the inner trim panels on both sides of the LC250's boot — these are the mounting points for the cover's end brackets. Align the cover's left and right end brackets with the corresponding side notches and press firmly until the unit clicks securely into position. Gently extend the cover across the full width of the boot to confirm it sits flush with no visible gaps along the edges or rear trim panel. Test the retract function several times to ensure smooth, consistent operation before replacing any removed items. Verify the cover sits level and does not interfere with the tailgate closing mechanism before use. ⚠ Before Purchase: This cover is engineered exclusively for the 2024–2025 Toyota Land Cruiser 250 Prado (LC250). Please confirm your exact model year and variant before ordering. It is not compatible with previous Prado generations or any LC300 variant. If you are uncertain, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before placing your order. Built for the LC250. Finished to Last. The LC250 deserves accessories that match its standard. Browse the full Toyota Land Cruiser LC250 interior collection at Victorious Automotive and equip your vehicle properly — with parts that fit first time, every time. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Windows Control Panel Decoration Protective Cover — Toyota Land Cruiser 250 Prado 2024 A precision-fit ABS overlay that shields your LC250's window control panel from daily wear while delivering an instant interior upgrade — available in Carbon Fibre, Wood Grain, and Gloss Black finishes. LC250 Prado 2024 ABS Material LHD & RHD Carbon Fibre Wood Grain Gloss Black Paste Fit No Drilling Interior Trim Overview The 2024 Toyota Land Cruiser 250 — sold in many markets as the Prado — represents a significant step forward in cabin refinement. Its interior balances genuine utility with elevated material quality, and owners who invest in the LC250 expect every touchpoint to feel intentional and considered. The window control panel, used dozens of times a day by every occupant, is one of the first areas to show signs of wear — scuffs, discolouration, and surface scratches accumulate quickly on unprotected trim. This Windows Control Panel Decoration Protective Cover is engineered to fit the 2024 LC250 precisely, dropping directly over the factory panel without modification. Constructed from high-grade ABS thermoplastic, it adds a tactile and visual layer that complements the vehicle's existing interior language. Whether you choose the Carbon Fibre pattern for a sporting aesthetic, the Wood Grain finish for classic warmth, or the understated Gloss Black for a sleek, monochromatic look — each option is designed to feel factory-fitted rather than aftermarket. The adhesive installation system uses automotive-grade 3M-style tape backing, meaning fitment is clean, residue-free on removal, and repeatable. There are no visible fixings, no drilling, and no risk to your factory panels. For LC250 owners who take pride in maintaining a pristine cabin, this cover represents a low-effort, high-impact upgrade that pays for itself in preserved resale value alone. What's Included 🪟 Window Control Panel Cover 1 × precision-fit ABS overlay for LC250 door panel 🔲 Pre-Applied Adhesive Automotive-grade tape pre-fitted to reverse of cover 📋 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Precision-moulded for the 2024 Toyota Land Cruiser 250 / Prado door panel geometry Available in Carbon Fibre Pattern, Wood Grain, and Gloss Black finishes Compatible with both Left Hand Drive and Right Hand Drive variants High-grade ABS construction — resistant to heat, UV fading, and impact Protects factory panel from scratches, scuffs, and daily contact wear Adhesive paste installation — no drilling, cutting, or modification required Low-profile design that integrates seamlessly with OEM interior styling Fully reversible — factory panel remains undamaged beneath the cover Maintains full access to all window control switches and buttons Elevates interior appearance with a premium, purposeful finish Compatibility Vehicle Year Drive Fit Toyota Land Cruiser 250 (Prado) 2024 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (Prado) 2024 Right Hand Drive (RHD) Direct Fit Toyota Land Cruiser 300 2021–2024 LHD / RHD Not Compatible Toyota Land Cruiser 200 2008–2021 LHD / RHD Not Compatible Toyota Prado 150 Series 2009–2023 LHD / RHD Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Select the correct finish variant (Carbon Fibre, Wood Grain, or Gloss Black) and confirm your vehicle's drive orientation (LHD or RHD) before beginning. Thoroughly clean the window control panel surface using an isopropyl alcohol wipe or clean microfibre cloth. Remove all dust, oils, and residue. Allow to dry fully — this step is critical to adhesion quality. Dry-fit the cover over the panel without removing the adhesive backing. Confirm alignment with all switch apertures and panel edges before committing. Peel the protective film from the adhesive tape on the reverse of the cover. Align carefully with the factory panel, starting from one edge and pressing down progressively to avoid air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact, paying particular attention to corners and edges. Allow the adhesive to cure for a minimum of 2 hours before operating the window switches to ensure a secure, lasting bond. ⚠ Note: Do not install in temperatures below 10°C / 50°F, as cold conditions significantly reduce adhesive performance. If the cover needs to be repositioned, do so immediately before the adhesive sets fully. Attempting to reposition after curing may reduce bond strength. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser 250 interior accessories — from dashboard trim covers to gear surround overlays — all engineered to the same standard of precision fit and finish. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Toyota, Land Cruiser, Prado, and LC250 are registered trademarks of Toyota Motor Corporation.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Gear Head Cover for Toyota Land Cruiser 250 Prado 2024 – Premium ABS Interior Trim Upgrade A precision-fit gear head cover that protects and elevates the centre console of your 2024 Land Cruiser Prado 250 with a choice of refined finish options. LC250 2024 ABS Material Carbon Fibre Pattern Silver Matte Peach Wood Interior Trim No-Drill Fit Adhesive Install Direct Fit Overview The 2024 Toyota Land Cruiser Prado 250 is one of the most capable and refined SUVs on the market — a vehicle that rewards its owner with serious off-road ability and a genuinely premium cabin environment. For owners who want to take that interior a step further, the details matter. The gear head cover is exactly the kind of considered upgrade that makes the difference between a standard cabin and one that reflects your personal standard. Crafted from high-quality ABS plastic, this gear head cover has been designed specifically for the LC250 console architecture. Available in three distinct finishes — Carbon Fibre Pattern, Silver Matte, and Peach Wood — each option has been developed to complement the LC250's interior design language rather than clash with it. Whether you prefer a modern motorsport aesthetic or a warmer, more classic tone, there is a finish to match your preference. Installation uses a vehicle-specific adhesive bond, meaning no drilling, no permanent modification, and no compromise to your factory components. The cover sits flush against the OEM surface, protecting the original gear head from everyday wear while presenting a noticeably more refined finish every time you reach for the selector. What's Included 🎛️ Gear Head Cover × 1 Precision-fit ABS trim cover for LC250 gear selector head 🔧 Adhesive Tape Pre-Applied Vehicle-specific adhesive for secure, residue-free bonding 📄 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Designed exclusively for the 2024 Toyota Land Cruiser Prado 250 (LC250) Three premium finish options: Carbon Fibre Pattern, Silver Matte, and Peach Wood High-grade ABS construction for durability and heat resistance in the cabin environment No-drill, adhesive-bonded installation — no permanent modification required Precision-engineered for a flush, factory-style fit with zero visible gaps Protects the OEM gear head surface from wear, scratches, and UV fading Lightweight design adds visual impact without adding bulk or weight Carbon Fibre Pattern finish delivers a motorsport-inspired interior aesthetic Peach Wood finish introduces warmth and a classic premium interior tone Fully reversible — remove cleanly without damaging original components Compatibility Vehicle Year Range Code Fitment Toyota Land Cruiser Prado 250 2024–Present LC250 Direct Fit Toyota Land Cruiser Prado 150 2009–2023 LC150 Not Compatible Toyota Land Cruiser 300 2021–Present LC300 Not Compatible Toyota Land Cruiser 200 2007–2021 LC200 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure the vehicle is parked and the gear selector is in the Park position before beginning installation. Thoroughly clean the gear head surface with an isopropyl alcohol wipe and allow it to dry completely — a clean surface is essential for maximum adhesion. Dry-fit the cover against the gear head to confirm alignment and fitment before removing the adhesive backing. Peel the protective layer from the pre-applied adhesive tape on the reverse of the cover. Carefully align the cover with the gear head and press firmly into position, holding for 30–60 seconds to allow the adhesive to bond. Apply firm, even pressure across the entire surface of the cover and avoid operating the gear selector for at least 30 minutes to allow the adhesive to fully cure. ⚠ Important: Do not install in temperatures below 10°C / 50°F as adhesive performance may be reduced. Avoid cleaning the surface with silicone-based products prior to installation — these leave a residue that prevents proper bonding. If the cover needs to be repositioned, do so within the first 10 seconds of initial placement. Complete Your LC250 Interior Browse the full range of Toyota Land Cruiser 250 Prado interior accessories at Victorious Automotive — curated upgrades for owners who hold their vehicles to a higher standard. Shop All LC250 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. Toyota and Land Cruiser Prado are registered trademarks of Toyota Motor Corporation. All vehicle names, codes, and model references are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Side Window Shade Screens for Toyota Land Cruiser 250 Prado LC250 2024–2025 Custom-fit mesh window shades engineered specifically for the LC250, delivering UV protection, cabin privacy, and insect resistance — without permanent modification to your vehicle. LC250 Prado 250 2024–2025 High-Density Mesh UV Protection Tool-Free Install Privacy Screen Insect Guard Interior Upgrade Overview The Toyota Land Cruiser 250 — also known as the Prado 250 — represents a new generation of capable, refined expedition SUV. Whether you're running school runs, overlanding remote terrain, or making long highway crossings with family aboard, the LC250 cabin deserves protection from the elements that daily driving constantly throws at it. Strong sun angles, UV exposure, unwanted visibility, and insects through open windows are realities that standard glazing simply doesn't address. These custom side window shade screens are precision-engineered to the exact glass dimensions of the 2024–2025 Land Cruiser LC250. Unlike universal shades that bubble, sag, or leave gaps, these screens conform to each window opening using a high-retention cling system — no suction cups, no adhesives, no drilling. The high-density mesh fabric blocks the majority of UV radiation and solar glare while still maintaining outward visibility for passengers and drivers. The result is a noticeably cooler, more private, and more comfortable cabin environment — especially relevant for rear passengers and young children who are most exposed to side window sun. Installation takes minutes, leaves no marks, and the screens can be removed or repositioned as needed. A clean, functional interior addition that works as hard as the LC250 itself. What's Included 🪟 Front Side Window Shades Left & right, custom-cut for LC250 front doors 🪟 Rear Side Window Shades Left & right, precision-fit to rear door glass 🪟 Third-Row / Quarter Window Shades Full cabin coverage for extended body variants 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Custom-cut to exact LC250 window dimensions for a clean, gap-free fit High-density mesh fabric blocks UV rays and reduces solar heat build-up Cling-mount system — no tools, suction cups, or adhesives required Maintains outward visibility for passengers while blocking direct sun Acts as a fine insect screen when windows are slightly open Provides meaningful cabin privacy without opaque blackout material Protects rear-seat passengers and children from harsh side-window glare Reduces reliance on air conditioning, improving fuel efficiency on longer drives Removable and repositionable — leaves zero residue on glass Full front-to-rear cabin set included for complete coverage in a single purchase Compatibility Vehicle Code Year Range Fit Toyota Land Cruiser 250 Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Land Cruiser 70 Series LC70 All Years Not Compatible Toyota RAV4 / Fortuner / Hilux — All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure all side windows are thoroughly clean and dry before fitting. Any dust or moisture under the screen will reduce cling performance. Identify each shade panel by size — front door panels are typically larger than rear. Refer to the included guide if unsure. Starting from one corner, press the mesh panel firmly against the interior glass surface, smoothing outward toward the edges to eliminate air pockets. Ensure the screen sits flush around the rubber window seal for a secure, rattle-free fit. Repeat for all remaining windows. The full set should take no more than 15 minutes from start to finish. To remove, simply peel from one corner. Store flat or rolled in the packaging to maintain shape for reinstallation. Note: These shades are designed for interior glass mounting only. Do not apply to exterior surfaces. For optimal UV performance, ensure no gaps remain between the screen edge and the window seal when fitted. Upgrade Your LC250 Interior Browse the full range of Toyota Land Cruiser LC250 interior accessories at Victorious Automotive — built for owners who expect precision fit and premium quality in every detail. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. Toyota, Land Cruiser, Prado, LC250, and all associated model names are trademarks of Toyota Motor Corporation. All product fitment references are provided for compatibility purposes only.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Third Row Seat Back Protection for Toyota Land Cruiser 250 (2024+) Purpose-engineered third row seat back protection that shields your LC250's second-row upholstery from scuffs, kicks, and luggage contact — maintaining that factory-fresh interior for longer. LC250 2024+ Third Row Protection Interior Accessory Black Direct Fit No Tools Required Easy Clean Overview The Toyota Land Cruiser 250 represents a bold return to form — a genuine, body-on-frame workhorse wrapped in a refined, modern interior. For LC250 owners who regularly use all three rows, that rear cabin takes a significant amount of daily punishment: bags loaded against seat backs, children's feet making contact, sporting equipment sliding into upholstery. The wear accumulates quickly, and factory trim is not cheap to restore. This third row seat back protection panel has been developed specifically for the 2024+ Land Cruiser 250 to address exactly that problem. Fitted to the rear-facing surface of the third row seat backs, it acts as a durable shield between the boot area and your original upholstery — intercepting abrasion, dirt transfer, and impact before it reaches the fabric or leather beneath. Finished in a clean, understated black, the panel integrates naturally with the LC250's interior aesthetic without drawing attention to itself. It's the kind of accessory experienced 4x4 owners install on day one — not after the damage is already done. What's Included 🛡️ Third Row Seat Back Protection Panel 1 x full panel — black, direct-fit for LC250 2024+ 📎 Mounting Hardware / Fixings All necessary attachments included for secure fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut for direct fitment to the 2024+ Toyota Land Cruiser 250 Protects factory upholstery from scuffs, abrasion, and dirt transfer Durable, easy-to-wipe-clean surface material — ideal for daily use Slim profile that sits flush without altering cabin ergonomics Understated black finish complements the LC250 interior design No drilling, cutting, or specialist tools required for installation Fully removable — leaves no marks or residue on factory trim Shields against luggage, sporting kit, and boot-area contact Maintains long-term resale value by preserving interior condition Lightweight and low-profile — no impact on third-row usability Compatibility Vehicle Year Range Trim / Grade Fitment Toyota Land Cruiser 250 2024+ All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021+ All Variants Not Compatible Toyota Land Cruiser 200 Series 2007–2021 All Variants Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Variants Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🛠 Tools Required: None Ensure the third row seat backs are folded or in their upright position as required for access — no need to remove any seats. Clean the rear-facing surface of the third row seat back with a dry or lightly damp cloth to remove any dust or debris. Allow to dry fully. Align the protection panel against the seat back surface, using the pre-fitted fixings or attachment points to position it centrally and flush. Secure the panel using the included mounting hardware, pressing firmly at all contact points to ensure a stable, rattle-free fit. Check alignment and test that the panel is fully secure before loading the boot area. No adhesives or permanent fixings are used. ⚠ Note: This protection panel is designed exclusively for the 2024+ Toyota Land Cruiser 250. Do not attempt to fit this product to other Land Cruiser variants — panel geometry will not align correctly and fitment will be compromised. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser 250 interior accessories — designed for owners who expect the same attention to detail from their accessories as Toyota put into the vehicle itself. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way officially connected with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Dashboard Decoration Cover for Toyota Land Cruiser 250 Prado — 2024 & 2025 A precision-fit ABS trim cover that refreshes the LC250's dashboard with a cleaner, more premium finish — available in Silver, Gloss Black, and Carbon Fibre Pattern. LC250 Prado 250 2024–2025 ABS Construction LHD Only Silver / Black / Fibre No-Drill Install Interior Trim Overview The Toyota Land Cruiser 250 — sold globally as the Prado 250 in select markets — represents a generational leap for one of the world's most respected SUV nameplates. Launched for the 2024 model year, the LC250 brings a more modern, technology-led cabin than its predecessors, yet many owners still feel there's room to sharpen the interior's visual identity and elevate the premium feel of specific surfaces. This dashboard decoration cover is engineered specifically for the 2024 and 2025 Land Cruiser 250, designed to sit flush over the existing dashboard trim surface and instantly refresh the look of your interior. Constructed from high-grade ABS plastic with a precisely moulded profile, the cover integrates cleanly with the factory architecture — no gaps, no misalignment, no compromise. Choose from Silver, Gloss Black, or Carbon Fibre Pattern to match your LC250's interior colour scheme and personal preference. The adhesive-backed installation system means there's no drilling, no cutting, and no permanent modification required. Whether you're looking to personalise a new delivery or restore a sense of visual freshness to your LC250's cabin, this cover delivers a meaningful upgrade with minimal effort and maximum visual return. What's Included 🛡️ Dashboard Decoration Cover 1 × trim cover; finish selected at checkout 🔧 Pre-Applied Adhesive Backing Factory-applied 3M-style tape for secure fitment 🧹 Cleaning Prep Wipe Alcohol wipe included for surface preparation 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for the 2024–2025 LC250 dashboard profile High-grade ABS plastic — resistant to heat, UV, and vibration Three finish options: Silver, Gloss Black, Carbon Fibre Pattern Factory-matched panel gaps for a seamless, OEM-style appearance Adhesive paste installation — no drilling or permanent alteration Does not interfere with dashboard vents, controls, or displays Protects the underlying dashboard surface from scratches and wear Lightweight construction adds no meaningful weight to the vehicle Removable without damage when using correct removal technique Compatible with both standard and optioned LC250 dashboard layouts (LHD) Compatibility Vehicle Model Year Drive Configuration Fitment Toyota Land Cruiser 250 (LC250) 2024 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (LC250) 2025 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 / Prado 250 2024–2025 Right Hand Drive (RHD) Not Compatible Toyota Land Cruiser 300 (LC300) All Years All Not Compatible Toyota Land Cruiser 200 (LC200) All Years All Not Compatible Toyota Prado 150 Series All Years All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Ensure the vehicle interior is at room temperature. Avoid fitting in direct sunlight or in cold conditions below 10°C, as this affects adhesive performance. Use the included alcohol prep wipe to thoroughly clean the target area of the dashboard. Remove all dust, grease, and residue, then allow to dry completely for 2–3 minutes. Dry-fit the decoration cover against the dashboard without removing the adhesive backing to confirm alignment and positioning before committing. Peel back the adhesive liner from the cover, aligning carefully with the dashboard profile. Press firmly into position starting from the centre outward. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Pay particular attention to edges and corners. Allow a minimum of 24 hours before exposing the cover to moisture or extreme temperature cycling for full adhesive cure strength. ⚠ Important: This product is designed exclusively for Left Hand Drive (LHD) Toyota Land Cruiser 250 models. Do not attempt to fit this cover to a Right Hand Drive vehicle — the panel geometry will not align correctly. If you are unsure of your vehicle's configuration, please contact us before ordering. More for Your Land Cruiser 250 Explore our full collection of interior and exterior accessories engineered specifically for the Toyota Land Cruiser LC250 — each piece selected for quality, fit, and finish. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes. Ensure correct vehicle specification before ordering. For fitment queries, contact our team prior to purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Seat Bottom Air Vent Protective Cover for Toyota Land Cruiser 250 Prado LC250 2024–2025 A precision-fit ABS cover that shields the LC250's under-seat air vents from dust, debris, and daily wear — finished in a premium carbon-fibre-style pattern that integrates seamlessly with the cabin. LC250 Prado 2024–2025 ABS Material Carbon Fibre Finish Direct Fit No Drilling Required Velcro Install Interior Protection Overview The Toyota Land Cruiser 250 — sold globally as the new Prado — represents a significant leap forward in cabin refinement and technology. Its updated interior architecture includes under-seat climate vents designed to improve rear-passenger airflow comfort. But like any precision-cut aperture in a premium cabin, those vents are vulnerable: dropped coins, dirt, pet hair, and general debris inevitably find their way in, leading to blockages, odours, and in some cases, damage to internal duct components. This Seat Bottom Air Vent Protective Cover is engineered specifically to address that vulnerability. Cut to the exact profile of the LC250's vent opening, it sits flush against the seat base and acts as a barrier — stopping unwanted material from entering while preserving full airflow functionality. The carbon-fibre-effect ABS finish gives it a purposeful, premium look rather than the afterthought aesthetic of a generic grille. Whether you use your Land Cruiser 250 for long-range touring, city commuting, or family duties, this is one of those small upgrades that pays dividends every single day — quietly protecting a part of the cabin that most owners don't even think about until something goes wrong. What's Included 🛡️ Seat Bottom Air Vent Cover 1× precision-fit ABS protective cover with carbon-fibre-style finish 🔧 Velcro Fasteners Pre-applied adhesive Velcro strips for tool-free installation 📋 Installation Guide Step-by-step fitting reference included in the package Product Highlights Precision-engineered to fit the LC250 / Prado 2024–2025 seat base vent exactly Prevents dust, pet hair, coins, and debris from entering the air duct system Premium carbon-fibre-pattern ABS surface complements the LC250 interior trim Maintains full airflow — does not obstruct climate ventilation performance Tool-free Velcro installation — no drilling, no adhesive damage to OEM surfaces Removable and repositionable for cleaning or adjustment Easy to wipe clean — resists dust build-up and everyday grime Protects original seat upholstery from airflow-related dirt accumulation Lightweight and low-profile — completely invisible when seated Durable ABS construction for long-term cabin use without warping or fading Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (new gen) LC250 / J250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado (prev gen) J150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 5–10 minutes  |  🔩 Tools Required: None Locate the air vent opening on the underside of the front seat base in your LC250 — this is typically positioned facing toward the rear passenger footwell. Clean the area around the vent opening with a dry microfibre cloth to remove any dust or residue. Allow to dry fully before proceeding. Peel the protective backing from the pre-applied Velcro strips on the rear face of the cover. Align the cover carefully with the vent aperture, ensuring it sits flush and level against the seat base surface. Press firmly for 10–15 seconds across the full Velcro contact area to ensure a secure bond. Test the fitment by gently pulling at the edges — the cover should feel firm and stable with no flex or lift. ⚠ Note: Confirm your exact model year and trim level before ordering. The LC250 platform was introduced for the 2024 model year — this cover is not compatible with previous-generation Prado or Land Cruiser variants. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your LC250 Interior Today Shop the full range of Toyota Land Cruiser 250 interior accessories at Victorious Automotive — curated for owners who expect the same quality from their upgrades as their vehicle delivers from the factory. Shop LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Upgrades LED Crystal Gear Shift Knob – Toyota Land Cruiser 250 / Prado LC250 (2024–2025) A premium crystal gear shift knob with dynamic 5-colour LED ambient lighting, engineered as a direct-fit replacement for the 2024–2025 Toyota Land Cruiser 250 and Prado LC250. LC250 Prado LC250 2024–2025 Crystal Finish LED Ambient Lighting 5-Colour Dynamic Direct Fit Interior Upgrade Wood Grain Option Fibre Pattern Option Overview The Toyota Land Cruiser 250 and Prado LC250 represent a new era for one of the world's most respected off-road platforms. With a significantly elevated interior compared to its predecessor, the LC250 sets a higher expectation for cabin quality — and the shift knob, as the most-touched surface during any drive, deserves to reflect that standard precisely. This LED Crystal Gear Shift Knob is purpose-built for the 2024 and 2025 Land Cruiser 250. The high-permeability crystal housing catches and diffuses interior light beautifully at rest, while the integrated 5-colour dynamic LED system creates a controlled ambient glow around the base and logo that shifts fluidly through your chosen colour mode. It's a detail that reads as factory-intentional rather than aftermarket-obvious. Available in wood grain and fibre pattern finishes to complement your LC250's interior trim, this knob slots directly into the factory location — no modifications, no cutting, no guesswork. It's the kind of upgrade that rewards you every time you reach for the selector. What's Included 💎 LED Crystal Gear Shift Knob 1 x unit — direct replacement, ready to install 🔌 Wiring Connector Pre-fitted LED connection harness 📄 Installation Guide Step-by-step fitting instructions included 🔩 Mounting Hardware All required fixings for secure fitment Product Highlights Dynamic 5-colour LED system — customisable ambient glow around the shift knob base High-permeability crystal construction — refracts light beautifully in any cabin lighting Special luminous logo inlay — subtle branded detail that glows without being garish Direct OEM replacement fitment — no drilling, cutting or modification required Available in wood grain and fibre pattern — choose to match your interior trim Comfortable ergonomic grip geometry — shaped for natural hand placement during driving Durable construction — crystal and premium base materials built for daily use Colour modes cycle through — select or cycle colours to match your mood or cabin theme Low-profile LED integration — lighting is embedded, not surface-mounted Plug-and-play LED connection — connects to vehicle power via existing harness points Compatibility Model Year Variant Fitment Toyota Land Cruiser 250 2024 All trim levels Direct Fit Toyota Land Cruiser 250 2025 All trim levels Direct Fit Toyota Prado LC250 2024 All trim levels Direct Fit Toyota Prado LC250 2025 All trim levels Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All variants Not Compatible Toyota Land Cruiser 200 (LC200) All years All variants Not Compatible Toyota Prado 150 All years All variants Not Compatible Installation Notes Difficulty: Easy · Estimated Time: 20–40 Minutes · Tools Required: Trim removal pry tool, cloth Ensure the vehicle is switched off and in Park (P) before beginning any work around the gear selector area. Carefully unscrew or unclip the OEM gear shift knob from the selector shaft — refer to your LC250 owner's manual for the exact removal method for your trim level. Disconnect the factory wiring harness from the original knob if applicable and set the OEM unit aside safely. Route the LED wiring harness from the new crystal knob down through the selector shaft housing to your chosen power connection point. Connect the LED harness to vehicle power — typically via the 12V accessory or interior lighting circuit. Consult the included wiring guide for the correct connection. Thread the new LED Crystal Gear Shift Knob onto the selector shaft, ensuring it seats flush and locks securely in position. Power on the vehicle and test LED operation — cycle through colour modes to confirm all functions are working correctly. Refit any surrounding trim panels removed during installation and inspect the finished result. ⚠ Note: Confirm exact compatibility with your vehicle's year, trim and selector type before purchase. If you are unsure about any wiring connections, professional installation is strongly recommended. Incorrect wiring can affect vehicle electronics. Elevate Every Shift in Your LC250 Explore the full range of Toyota Land Cruiser LC250 interior accessories at Victorious Automotive — precision-selected upgrades for owners who expect more from their cabin. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Seat Bottom Air Vent Dust Cover – Toyota Land Cruiser 250 LC250 (2024–2025) A precision-engineered stainless steel dust cover that seals your LC250's seat bottom air vents from debris, keeping the interior cleaner and sharper-looking from day one. LC250 Prado 2024–2025 Stainless Steel Direct Fit Silver / Black No Drilling Interior Trim Dust Protection Overview The Toyota Land Cruiser 250 — sold in many markets as the new Prado — is a genuine step forward in the Land Cruiser lineage. Its refined cabin brings a level of interior quality that owners rightly want to protect and maintain over the long haul. One of the most overlooked vulnerability points in any modern SUV interior is the seat bottom air vent: an open grille directly exposed to foot traffic, dropped items, dust ingress and general debris accumulation that can quietly degrade both the aesthetics and the function of your ventilation system. This Seat Bottom Air Vent Dust Cover is engineered exclusively for the LC250 platform. Cut from durable stainless steel with a finish available in silver or gloss black, it slots over your existing seat bottom vent aperture with a clean, factory-flush appearance. The result is a sealed surface that prevents grit, crumbs and fine dust from working their way into the vent channel — while simultaneously giving the lower seat area a more purposeful, finished look that suits the cabin's premium character. Installation requires no drilling, no cutting and no permanent modification. The cover adheres via a high-bond paste method, meaning it can be applied cleanly in minutes and leaves no trace if ever removed. For LC250 owners who take pride in maintaining an immaculate interior, this is the kind of small detail that quietly makes a meaningful difference. What's Included 🛡️ Seat Bottom Air Vent Dust Cover × 1 Stainless steel, available in Silver or Black finish 📋 Installation Instructions Step-by-step guide included in packaging 🔧 Adhesive Paste High-bond paste for secure, residue-free fitment Product Highlights Precision-cut to match the exact seat bottom vent dimensions of the LC250 Durable stainless steel construction for long-term resistance to wear and corrosion Available in Silver and Gloss Black to suit your interior colour scheme Prevents dust, grit and debris from entering the seat ventilation channel Flush-fit design integrates seamlessly with the factory interior trim No drilling, no cutting — zero permanent modification required High-bond adhesive paste method for a firm, lasting hold Removable without leaving marks or residue on original surfaces Enhances the visual finish of the lower seat area with a clean, premium look Compatible with both standard and ventilated seat configurations on the LC250 Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser 250 (LC250) 2024–2025 All Trims Direct Fit Toyota Land Cruiser Prado (LC250 Platform) 2024–2025 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All Trims Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Trims Not Compatible Toyota Land Cruiser Prado 150 2009–2023 All Trims Not Compatible Installation Notes 🔩 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🛠 Tools Required: None Begin with a clean, dry seat base. Use a microfibre cloth to remove any dust or residue from the surface surrounding the air vent aperture. Test-fit the dust cover over the vent opening without adhesive to confirm alignment and confirm the fitment is flush with the surrounding trim panel. Apply a thin, even layer of the included high-bond paste to the rear contact surface of the dust cover. Press the cover firmly over the vent aperture, aligning it carefully with the trim edges. Hold in place with firm pressure for 30–60 seconds. Allow the adhesive to cure for a minimum of 2 hours before exposing the area to heavy contact or cleaning products. ⚠ Please Note: Ensure your vehicle model year is 2024 or 2025 LC250 before ordering — this cover is not compatible with earlier Land Cruiser or Prado platforms. Clean the application surface thoroughly before adhering; oils or wax residue will reduce bond strength. Do not apply in temperatures below 10°C. Explore the Full LC250 Interior Collection This dust cover is one part of a growing range of precision-fit interior upgrades for the Toyota Land Cruiser LC250. Browse the full collection and keep your build consistent from floor to ceiling. Shop LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used for compatibility identification purposes only. All rights remain with their respective owners.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Storage Dedicated Sunglasses Box Storage for Toyota Land Cruiser 250 Prado LC250 2024–2025 A precision-fit sunglasses storage unit designed exclusively for the LC250 interior — keeping your eyewear protected, scratch-free, and within arm's reach at all times. LC250 Prado 250 2024–2025 ABS Material Black / Beige Direct Fit No Drilling Interior Upgrade Overview The Toyota Land Cruiser 250 — known in many markets as the new Prado — represents a significant step forward for Toyota's legendary off-road lineage. Its interior is modern, well-appointed, and clearly designed with the driver in mind. Yet like many factory cabins, practical eyewear storage often remains an afterthought. That changes with this dedicated sunglasses box, engineered from the ground up for the LC250's specific interior architecture. This storage unit slots seamlessly into your LC250's interior, providing a dedicated home for your sunglasses that feels factory-fitted rather than retrofitted. The interior cradle is designed to grip your glasses without applying excessive pressure, preventing the micro-scratches that accumulate over time from loose storage in a centre console or door pocket. Whether you're switching between prescription glasses and sunglasses on a long road trip or simply need quick access to your shades at a traffic light, this unit delivers that convenience effortlessly. Manufactured from durable ABS plastic and available in Black and Beige to complement both dark and light interior trim configurations, this addition is as refined as it is functional. It's the kind of detail that LC250 owners appreciate — thoughtfully considered, neatly executed, and built to last the life of the vehicle. What's Included 🕶️ Sunglasses Storage Box 1x dedicated unit, LC250 custom fit 🔧 Fitting Hardware All clips and fasteners included 📄 Installation Guide Step-by-step fitting instructions Product Highlights Custom-engineered fit for the Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Scratch-resistant interior cradle protects lens coatings and frames Firm grip retention prevents glasses from rattling or shifting on rough terrain Available in Black and Beige to match factory interior trim options Constructed from high-grade ABS plastic for long-term durability Tool-free installation — no drilling, cutting, or permanent modification required Keeps eyewear within easy reach of the driver at all times Low-profile design maintains the clean, factory aesthetic of the LC250 interior Accommodates most standard and oversized sunglass frame sizes Designed to withstand heat, UV exposure, and daily open-and-close use Compatibility Vehicle Code Years Fit Toyota Land Cruiser 250 / Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Prado 150 Series J150 2009–2023 Not Compatible Toyota Fortuner / Hilux – All Years Not Compatible Installation Notes 📋 Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Confirm your vehicle is a Toyota Land Cruiser 250 / Prado LC250 (2024 or 2025 model year) before beginning. Remove any existing items from the designated overhead or console storage area where the unit will be fitted. Align the sunglasses storage unit with the mounting points specific to the LC250 interior — refer to the included guide for exact positioning. Press the unit firmly into place until the clips engage and the unit sits flush with the surrounding trim panel. Test the opening and closing mechanism to confirm smooth operation and secure retention. Place your sunglasses into the cradle and confirm they are held firmly without excessive pressure on the frames or lenses. ⚠ Important: Please verify your exact vehicle model and production year before purchasing. This unit is designed specifically for the LC250 platform and will not fit earlier Prado generations or other Land Cruiser variants. When in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for you. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser LC250 interior accessories — from protective seat covers to carbon trim upgrades — all selected and curated for the discerning LC250 owner. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or associated with Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Center Dashboard Console Storage Protection Sleeve — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) A precision-formed silicone sleeve that shields your LC250's center dashboard console from daily wear while adding discreet, accessible storage — installed in seconds, no tools required. LC250 Prado 2024–2025 Premium Silicone Scratch Protection Integrated Storage Direct Fit 3-Second Install Black Overview The 2024–2025 Toyota Land Cruiser 250 represents a significant generational step forward — a refined, capability-focused SUV that blends serious off-road credentials with a noticeably premium interior. Owners of the LC250 invest considerable thought into how their vehicle looks and functions day-to-day, and the center dashboard console is one of the most touched and most exposed surfaces in the cabin. This Center Dashboard Console Storage Protection Sleeve is engineered specifically for the LC250's interior geometry. Manufactured from durable, high-grade silicone, it wraps precisely around the console, creating a protective layer that absorbs contact, resists scratches, and keeps the original panel in showroom condition beneath. Where standard OEM surfaces show wear from keys, phones, and everyday use, this sleeve quietly absorbs that punishment instead. Beyond protection, the sleeve introduces practical, organised storage slots — ideal for cards, small cables, coins, or anything you'd otherwise drop into the cupholder. The fit is exact enough that there is zero interference with the vehicle's horn or surrounding controls, and the installation requires nothing more than positioning the sleeve correctly. It simply drops into place and stays there, ready to use immediately. What's Included 🛡️ Protection Sleeve × 1 Silicone center dashboard console sleeve, precision-fit for LC250 Product Highlights Precision-engineered fit specific to the 2024–2025 Land Cruiser 250 / Prado LC250 interior dimensions Premium durable silicone construction — soft to the touch, resistant to heat, UV, and daily abrasion Protects the original OEM dashboard panel from scratches, scuffs, and contact marks Integrated storage slots for cards, cables, coins, and small everyday carry items Zero interference with horn operation or surrounding console controls 3-second tool-free installation — position, press, and it's ready to use immediately Stays securely in place without adhesive — no residue risk to OEM surfaces Matte black finish blends seamlessly with the LC250's factory interior trim Fully reversible — remove and restore the original look at any time Adds practical cabin organisation without altering the vehicle's aesthetic character Compatibility Vehicle Code Years Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (250 Series) LC250 Prado 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 Series LC150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 1 minute  ·  Tools Required: None Remove any items currently resting on or around the center dashboard console area to give yourself a clear working surface. Unpack the silicone sleeve and orient it correctly — the storage slots should face upward and the sleeve contours should align with the panel edges. Lower the sleeve into position over the console, pressing gently along the edges to ensure full contact with the OEM panel surface. Confirm the sleeve sits flush and that all surrounding controls, buttons, and the horn remain fully unobstructed and operational. The sleeve is now installed and ready for immediate use — no curing, drying, or waiting required. Note: Ensure the console surface is clean and free from dust or debris before fitting the sleeve. This prevents any particles from being trapped beneath the silicone and causing the very scratches the sleeve is designed to prevent. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser LC250 interior and exterior accessories — curated for owners who expect their vehicle to perform and look its best, on-road and off. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Stainless Steel Seat Protection Kick Plate — 2024–2025 Toyota Land Cruiser Prado 250 Precision-formed 304 stainless steel kick plate that shields the LC250's seat bases and lower door surrounds from scuffs, dirt, and daily wear — without a single mark left on the vehicle. LC250 2024–2025 304 Stainless Steel No-Drill Fit Anti-Kick Protection Interior Trim Available in 3 Finishes Direct Fit Overview The 2024 Toyota Land Cruiser Prado 250 represents a significant generational step forward — a vehicle built for genuine capability without compromising interior refinement. Owners who invest in the LC250 understand that preserving its interior condition from the very first mile is not overcaution; it's ownership intelligence. The seat bases and lower cabin panels are among the first surfaces to suffer from boots, luggage, and passenger entry — areas that are awkward to clean and expensive to restore. This Stainless Steel Seat Protection Kick Plate is engineered specifically for the LC250's interior geometry. Formed from grade 304 stainless steel and finished in your choice of silver, black, or carbon pattern, each plate sits flush against the lower seat frame and adjacent trim, creating an unobtrusive barrier between the panel and whatever daily life throws at it. The result is a factory-clean look that stays that way — whether you're on a weekly school run or returning from a weekend on rough terrain. Installation is entirely damage-free — no drilling, no permanent adhesives, no risk to original panels. The plate adheres securely using automotive-grade 3M tape and precisely located clips designed to match the LC250's existing mounting points. It can be removed cleanly if needed, making it ideal for lease vehicles or owners who prefer reversible modifications. What's Included 🛡️ Seat Protection Kick Plate × 1 304 stainless steel, LC250-specific profile 🔧 Mounting Hardware Pre-applied 3M tape and locating clips included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed to match the LC250 seat base profile exactly Grade 304 stainless steel — corrosion-resistant and long-lasting Available in silver, black, and carbon pattern finishes No-drill, damage-free installation — safe for leased vehicles Shields lower panels from boot scuffs, mud, and heavy wear Preserves original flooring and upholstery beneath the seat Easy to clean — smooth steel surface wipes down in seconds Removable cleanly without residue or panel damage Low-profile design integrates with factory interior styling Ideal for both urban daily use and off-road adventure conditions Compatibility Vehicle Generation / Code Years Fit Toyota Land Cruiser Prado 250 Series (LC250) 2024–2025 Direct Fit Toyota Land Cruiser Prado 150 Series (LC150) 2009–2023 Not Compatible Toyota Land Cruiser 300 Series (LC300) 2021–2025 Not Compatible Toyota Land Cruiser 200 Series (LC200) 2007–2021 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean and degrease the mounting surface on the lower seat base and adjacent trim panel using an IPA wipe or similar prep solution. Allow to dry completely. Dry-fit the kick plate against the seat base to confirm alignment and check that all locating clips seat correctly in their designated positions. Peel the backing from the pre-applied 3M double-sided tape and carefully position the plate, pressing firmly from the centre outward to eliminate air pockets. Apply firm, even pressure along the entire plate for 30–60 seconds to ensure full tape adhesion and clip engagement. Allow a minimum of 1 hour before exposing the plate to heavy use, particularly in cold ambient temperatures, to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation on a damp, dusty, or freshly valeted surface. Ensure the panel temperature is between 10°C and 38°C for optimal adhesive bonding. Inspect all clips before fitting — do not force any component. Complete Your LC250 Interior Browse our full range of Toyota Land Cruiser LC250 accessories — from door sill protectors to interior trim upgrades — all selected and tested for the 250 Series platform. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Compatibility information is provided in good faith — please verify against your specific vehicle configuration before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Styling Door Waist Line Chrome Decoration Strip — Toyota Land Cruiser 250 / Prado LC250 (2024+) A precision-fitted chrome waist line strip that elevates the LC250's profile while shielding door flanks from everyday kerb marks and surface scuffs — no drilling, no fuss. LC250 Prado 2024+ Chrome Finish ABS Material No-Drill Fit Silver & Black Paint Protection Exterior Trim Overview The 2024 Toyota Land Cruiser 250 — and its Prado LC250 sibling — arrived as a bold reinterpretation of one of the world's most respected four-wheel drives. Its angular body lines and prominent door panels are a defining part of that character, and this chrome waist line decoration strip is designed to complement that aesthetic precisely, tracing the factory body crease with a refined metallic accent that feels factory-correct rather than aftermarket. Crafted from high-grade ABS material with a chrome or blacked-out finish, the strip runs along the door waist line to add visual depth and a premium two-tone contrast against the LC250's bodywork. Beyond the styling benefit, the strip acts as a practical barrier against the inevitable door dings, carpark scrapes and surface marks that accumulate on wide-bodied SUVs — protecting the paint underneath without any permanent modification to the body. Installation is entirely adhesive-based. The strip arrives pre-cut for the LC250's door profile, with a purpose-formulated 3M-style backing tape that bonds firmly to clean bodywork and holds through temperature cycling and washing. Whether you're refining a daily driver or completing a detailed exterior build, this is an understated upgrade that LC250 owners consistently rate as one of the most satisfying low-effort improvements available. What's Included ✦ Chrome Decoration Strip Set Full door waist line set, pre-cut for LC250 fitment 🔧 Pre-Applied Adhesive Tape High-bond 3M-style backing for permanent, clean fitment 🧹 Surface Prep Wipe IPA cleaning wipe for adhesion preparation 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-cut profile matched to the 2024 Toyota Land Cruiser 250 door line Available in Silver Chrome and Matte Black to suit different build styles High-grade ABS construction — resistant to UV fade, warping and cracking No drilling, no cutting — fully adhesive installation preserves bodywork integrity Acts as a physical barrier against door dings, kerb marks and surface scuffs Protects underlying factory paint from chips and micro-abrasion damage Chrome finish mirrors factory trim detailing for a seamless, OEM-style look Holds firm through car washes, temperature extremes and UV exposure Reversible upgrade — removal leaves no permanent marks when done correctly Compatible with both standard and Prado LC250 body variants (2024 onwards) Compatibility Vehicle Year Range Variant Fitment Toyota Land Cruiser 250 2024+ All Grades Direct Fit Toyota Land Cruiser Prado LC250 2024+ All Grades Direct Fit Toyota Land Cruiser 300 (LC300) 2021+ All Grades Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Grades Not Compatible Toyota Land Cruiser Prado 150 2009–2023 All Grades Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔩 Tools Required: None Wash and thoroughly dry the door panels. Pay particular attention to the waist line crease where the strip will sit — any wax residue or moisture will compromise adhesion. Use the included IPA prep wipe (or isopropyl alcohol) to clean the full length of the application area. Allow to dry completely — 2 to 3 minutes at room temperature. Dry-fit the strip against the door to confirm alignment before committing. The strip should follow the factory body crease naturally without forcing. Starting from one end, peel back approximately 10cm of the adhesive backing and press the strip firmly into position, working along the panel progressively — avoid pulling the strip taught, which can introduce flex stress. Once fully applied, run a soft cloth firmly along the entire strip to activate the adhesive bond evenly. Apply firm, consistent pressure for 30 seconds per section. Allow the adhesive to cure for a minimum of 24 hours before washing or exposing the vehicle to rain. Avoid using pressure washers directly over the strip edges for the first 72 hours. ⚠ Important: Install in ambient temperatures above 15°C (59°F) for optimal adhesive performance. Cold weather significantly reduces initial bond strength. If fitting in winter, warm the panel gently with a heat gun on a low setting before application. Always confirm panel fitment before removing the full adhesive backing. Explore More LC250 Exterior Upgrades Complement your new waist line strips with the full range of Toyota Land Cruiser LC250 exterior accessories available at Victorious — trusted by 12,300+ verified customers worldwide. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used solely for the purpose of indicating product compatibility. Please verify fitment against your specific vehicle configuration prior to purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Trim Tail Door Pedal Trunk Trim Exterior — Toyota Land Cruiser 250 (2024) A precision-cut stainless steel trunk sill guard that protects the Land Cruiser 250's rear entry point while adding a distinctly refined finish to the tailgate area. LC250 2024 Stainless Steel Exterior Trim Trunk Sill Guard 4 Colour Options Adhesive Fit No Drilling Required Overview The 2024 Toyota Land Cruiser 250 represents a landmark return to form — a capable, modern body-on-frame SUV built for those who demand both off-road performance and on-road presence. Owners invest heavily in their LC250 not just for what it can do, but for how it looks doing it. Every detail matters, and the rear tailgate area is one of the most exposed and frequently used parts of the vehicle. This Tail Door Pedal Trunk Trim is engineered specifically for the 2024 Land Cruiser 250, covering the lower edge of the tailgate aperture where wear, scratches, and scuffs inevitably accumulate during daily loading. Whether you're sliding gear into the boot after a weekend trail run or simply loading groceries, this trim acts as a permanent barrier between your cargo and the factory paintwork — while elevating the aesthetics of the rear entry in the process. Constructed from high-grade stainless steel and finished in your choice of four distinctive styles, this trim installs via a clean adhesive bond — no drilling, no permanent modification, and no specialist tools required. It sits flush against the factory panel, complements the LC250's angular exterior language, and adds a layer of premium finish that feels factory-appropriate from day one. What's Included 🪟 Trunk Sill Trim Panel 1 × stainless steel tail door pedal trim piece 🔧 Pre-Applied Adhesive Tape 3M-grade bonding strip pre-fitted to rear face 📋 Installation Guide Step-by-step printed instructions included 🧽 Surface Prep Wipe Alcohol cleaning cloth for bond preparation Product Highlights Precision-formed to match the exact contours of the 2024 LC250 tailgate sill High-grade stainless steel construction — corrosion-resistant and built to last Four finish options: Silver, Black, Fiber Pattern, and Silver Particle Pattern Adhesive installation — no drilling, no modification to factory bodywork Protects original paint from scratches, scuffs, and cargo contact Flush, factory-style fitment that integrates seamlessly with LC250 styling Resistant to UV fade, moisture, and temperature extremes Suitable for all body configurations of the 2024 Land Cruiser 250 Lightweight construction adds no meaningful weight to the tailgate Removable without paint damage if required — adhesive bond is clean and controlled Compatibility Vehicle Code Year Range Fit Toyota Land Cruiser 250 LC250 2024 Direct Fit Toyota Land Cruiser 300 LC300 2021–2024 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado J250 2024 Not Compatible Installation Notes Difficulty: Easy  |  Estimated Time: 15–20 minutes  |  Tools Required: None Open the tailgate fully and ensure the rear sill area is clean, dry, and free from wax, polish, or moisture. Use the included alcohol wipe to thoroughly clean the mounting surface — allow 2–3 minutes to fully dry before proceeding. Dry-fit the trim panel against the sill to confirm alignment and positioning before committing the adhesive bond. Peel the protective backing from the pre-applied adhesive tape, carefully aligning the trim from one end to the other. Press firmly along the full length of the trim for 30–45 seconds to ensure a strong, even bond across the surface. Allow a minimum of 2 hours before use in wet conditions or heavy loading. For best results, avoid loading overnight after installation. ⚠ Important: Ensure installation is carried out at temperatures above 10°C (50°F) for optimal adhesive performance. Do not install on freshly painted or repaired panels — allow new paintwork at least 30 days to fully cure before fitting. Complete Your LC250 Build Explore our full range of exterior and interior accessories for the 2024 Toyota Land Cruiser 250 — designed for owners who expect precision fit, premium finish, and lasting quality. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Engine Bay Accessories Engine Cover for Toyota Land Cruiser 250 – LC250 Prado (2024–2025) A precision-engineered ABS engine cover that delivers a factory-finished look under the bonnet of your LC250 — direct-fit, no modifications required. LC250 2024–2025 Land Cruiser Prado ABS Plastic Matte Black Direct Fit No Drilling Engine Bay Overview The Toyota Land Cruiser 250 — also known as the new-generation Prado — represents a significant leap forward in Toyota's flagship off-road lineage. With a redesigned platform, refined powertrain options, and a noticeably more premium interior, the LC250 attracts owners who expect excellence in every detail. That attention to detail shouldn't stop at the firewall. This engine cover has been developed specifically for the 2024 and 2025 LC250, engineered to sit flush over the engine bay with a clean, purposeful finish. Constructed from high-quality ABS — the same class of material used across OEM interior and exterior trim components — it delivers meaningful visual improvement without sacrificing the accessibility you need for routine maintenance. The cover aligns perfectly with the vehicle's original screw hole positions, meaning no drilling, no adhesive, and no guesswork. For LC250 owners who have invested in their vehicle's interior or exterior appearance, leaving an exposed, utilitarian engine bay feels inconsistent. This cover addresses that — discreetly, confidently, and without compromise. It's a small upgrade that reads clearly as the right decision every time you open the bonnet. What's Included 🛡️ Engine Cover × 1 ABS matte black, LC250-specific fitment 🔩 Mounting Hardware Aligns to OEM screw hole positions 📋 Fitment Guide Step-by-step installation reference Product Highlights Engineered exclusively for Toyota LC250 (2024–2025) Premium ABS construction — rigid, heat-resistant, durable Matte black finish — clean and consistent with OEM aesthetics Aligns to factory screw holes — zero modifications needed Improves the visual presentation of your engine bay instantly Lightweight design — no added stress on mounting points Resistant to engine bay heat and oil vapour exposure Tool-free or minimal-tool installation in under 15 minutes Removable for routine maintenance and servicing access Consistent finish that complements interior and exterior upgrades Compatibility Vehicle Code Years Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (250 Series) LC250 / J250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 Series J150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools: Screwdriver or trim tool (if required) Ensure the engine is fully cooled before beginning. Open the bonnet and secure it fully in the open position. Clear the engine bay area of any debris or loose items that may interfere with cover placement. Position the engine cover over the engine bay, aligning the mounting points with the vehicle's original OEM screw hole locations. Hand-tighten or clip the cover into place depending on the mounting mechanism — do not overtighten. Confirm the cover sits flush and level across all edges. Check for any contact with moving components or high-heat surfaces. Close the bonnet and verify clearance. Reopen and double-check fit before first drive. ⚠ Important: Verify your exact model year and engine variant before installation. This cover is designed for the LC250 (2024–2025) only. Always confirm the cover is fully secured and clear of any engine components before operating the vehicle. If unsure, consult a qualified technician. Complete Your LC250 Build Browse the full Victorious collection for the Toyota Land Cruiser LC250 — from interior enhancements to exterior protection. Every product is selected for fit, finish, and longevity. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and references are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Toyota LC250 · Interior Lighting Tailgate Lights for Toyota Land Cruiser 250 Prado LC250 — 2024 & 2025 A purpose-built tailgate lighting upgrade for the LC250 Prado — delivering white cargo illumination, red warning light, and flashing amber hazard signalling directly from the tailgate. LC250 Prado 250 2024–2025 Cargo Light Warning Light Tailgate Mounted Plug-and-Play Interior Upgrade Overview The Toyota Land Cruiser 250 — widely known in international markets as the Prado LC250 — launched in 2024 as a thoroughly modern interpretation of the iconic nameplate. Built for both serious overland work and refined daily use, the LC250 demands accessories that match its dual-purpose engineering ethos. Whether you're loading gear on a remote campsite after dark or parked roadside with the tailgate open, factory lighting rarely meets the practical demands of real-world use. These tailgate lights are engineered specifically for the 2024 and 2025 Land Cruiser 250 Prado, mounting cleanly to the tailgate area and offering three distinct lighting modes: bright white light to flood the cargo bay, steady red light to alert vehicles approaching from behind when stationary, and a flashing white-amber mode ideal as a hazard or attention signal. Each mode serves a genuine purpose — this is not decorative lighting. Installation follows a guided process with no permanent modification required to your LC250. The result is a functional, clean-looking upgrade that feels factory-integrated, adding real utility for overlanding, night-time loading, roadside stops, picnics, and off-road camping — exactly the scenarios this Land Cruiser was built for. What's Included 💡 Tailgate Light Unit Pre-wired LED module designed for LC250 tailgate fitment 🔌 Wiring Harness Vehicle-specific connector harness for clean integration 🔩 Mounting Hardware All fixings and brackets required for fitment 📄 Installation Guide Step-by-step instructions with video support available Product Highlights Designed exclusively for Toyota Land Cruiser 250 Prado (2024–2025) Three lighting modes: white cargo, red warning, white-amber flashing Illuminates boot interior for easy night-time loading and unloading Red steady light warns approaching vehicles when tailgate is open Flashing mode ideal for roadside hazard and campsite visibility Lights up the ground beneath the tailgate for added safety after dark No permanent modification required to the LC250 body or electrics Plug-and-play wiring integration — no specialist tools required Compact, low-profile design maintains the LC250's clean aesthetic Guided installation via included instructions or video walkthrough Compatibility Vehicle Code Year Range Fitment Toyota Land Cruiser 250 Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Toyota Hilux Surf / 4Runner — All Years Not Compatible Installation Notes Difficulty: Beginner-Friendly  ·  Estimated Time: 30–60 Minutes  ·  No Drilling Required Open the tailgate of your LC250 fully and locate the interior tailgate panel — no trim removal tools are needed beyond a basic trim pry tool. Carefully release the tailgate interior trim panel clips to access the rear wiring area — take care not to stress the panel. Route the supplied wiring harness to the appropriate power feed point as indicated in the installation guide or video walkthrough. Mount the LED light unit to the designated tailgate position using the supplied brackets and fixings — no permanent holes are required. Connect the wiring harness using the plug connectors provided and test all three lighting modes before refitting trim. Refit the tailgate interior trim panel, ensuring all clips are fully seated and the wiring is neatly routed away from any moving components. Note: Always disconnect the vehicle's 12V power supply before working with any automotive wiring. If you are unsure at any stage, consult a qualified auto-electrician. Installation video guidance is available — contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) for support. Upgrade Your LC250 Today Practical, clean, and purpose-built for the Land Cruiser 250 Prado — these tailgate lights are the after-dark upgrade your LC250 deserves. Order today with worldwide DHL, FedEx, UPS & TNT shipping and our 30-day money-back guarantee. Shop LC250 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Toyota Land Cruiser, or any of their subsidiaries. All product names, model codes, and vehicle references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Lighting Two-Color Gold Front Fog Lamp — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Switchable white and yellow LED fog lighting engineered for the LC250 — precision-fit, plug-and-play, and built to perform in every condition the road throws at you. LC250 2024–2025 Dual-Color LED ABS Construction Plug-and-Play Gold Finish Front Fog Lamp Prado Overview The Toyota Land Cruiser 250 — also known as the Prado LC250 — arrived for 2024 as one of the most capable and thoughtfully engineered SUVs on the market. Whether you're navigating tight mountain passes or pushing through poor-visibility lowland roads, the LC250 deserves lighting hardware that matches its capability. The factory fog lamps do their job, but enthusiasts who live in variable climates or tackle genuine off-road terrain know that adaptable lighting is not a luxury — it's a necessity. This Two-Color Gold Front Fog Lamp is purpose-designed for the 2024–2025 Land Cruiser 250, offering a seamless upgrade that slots directly into the original fog lamp housing with no cutting, no splicing, and no guesswork. The standout feature is its dual-mode illumination: a first-press delivers crisp white light for clear-weather visibility and a second-press switches to penetrating amber-yellow light — the preferred choice for fog, heavy rain, snow, and dust conditions where white light scatters and reduces clarity. Constructed from high-quality ABS with a premium gold finish, this fog lamp holds up to vibration, moisture, and temperature extremes without compromising on aesthetics. It uses the original OEM socket connection for a secure, rattle-free fit — meaning once installed, you won't know it wasn't there from the factory. For LC250 owners who refuse to compromise on either function or form, this is the upgrade that delivers on both fronts. What's Included 💡 Two-Color Gold Front Fog Lamp 1 x unit — dual-mode white/yellow LED, gold finish 🔌 OEM-Compatible Connector Plug-in harness matching original LC250 socket 🔩 Mounting Hardware All fixing hardware required for installation 📄 Installation Reference Basic fitting guide included in packaging Product Highlights Dual-color switching: white light on first activation, amber-yellow on second for optimised fog and rain penetration Gold decorative finish gives the LC250 front end a distinctive, premium look that complements the factory design language High-quality ABS housing resists cracking, UV fading, and road vibration for long-term reliability Direct OEM socket compatibility — no wiring modifications required, preserving factory electrics and warranty integrity Yellow light mode reduces backscatter in poor weather, significantly improving driver visibility in fog, snow, and rain Engineered specifically for 2024–2025 LC250 and Prado models — not a universal fit, ensuring precise alignment every time White light mode provides broad, clear beam spread for night-time driving on unlit roads and trails Lightweight ABS construction adds zero meaningful weight, keeping the front-end balance of your LC250 unchanged Simple two-step installation achievable with basic tools in under an hour — no specialist equipment needed Tested for moisture ingress resistance, making it suitable for river crossings, heavy rain, and off-road mud environments Compatibility Vehicle Code Year Range Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado LC250 (Prado) 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–60 Minutes  |  🛠 Tools: Basic Hand Tools Ensure the vehicle is parked on a flat surface with the ignition off and keys removed before beginning any work. Locate the existing front fog lamp assembly on the affected side. Remove the front bumper access panel or fog lamp retaining clips as required to access the unit. Disconnect the original fog lamp from the OEM wiring harness by pressing the connector release tab and pulling firmly but carefully. Remove the existing fog lamp from the housing by unscrewing the retaining fasteners and withdrawing the unit. Position the new Two-Color Gold Fog Lamp into the housing, aligning the mounting points. Secure with the original or supplied fasteners — do not overtighten. Connect the OEM-compatible plug from the new lamp directly into the vehicle's wiring harness until it clicks securely into place. Before reassembling, turn the ignition to the accessory position and test both light modes: press once for white, press again for yellow. Confirm both modes activate correctly. Refit the access panel or bumper trim, ensuring all clips are fully seated. Repeat on the opposite side if fitting a pair. ⚠ Important: Always test lighting functions fully before permanent reassembly. If your vehicle is within its manufacturer warranty period, confirm with your dealer that this accessory fitment is acceptable before installation. Ensure no wires are pinched during bumper trim refitting. Upgrade Your LC250 — The Right Way At Victorious Automotive, every product we list for the Land Cruiser LC250 is selected because it genuinely improves the driving experience without compromising the vehicle's integrity. This fog lamp is no exception — precise fitment, real-world function, and a finish that looks the part. Shop the full LC250 exterior collection below. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment compatibility identification. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Styling Headlight Below Decorative Strip — Toyota Land Cruiser 250 LC250 (2024–2025) A precision-formed stainless steel accent strip that frames the lower headlight aperture of the LC250, sharpening the front fascia with a subtle, factory-coherent finish. LC250 Land Cruiser 250 2024–2025 Prado FJ250 1958 First Edition Stainless Steel Silver Finish Paste Install Exterior Trim Overview The Toyota Land Cruiser 250 represents a significant generational step for the nameplate — bolder proportions, a more upright front face, and a design language that demands accessories built to the same standard. Every line on the LC250's fascia is deliberate, and the lower headlight zone is one of the most visible elements at eye level. Left bare, it can read as unfinished. Addressed correctly, it becomes a defining detail. This headlight below decorative strip is engineered exclusively for the 2024–2025 Land Cruiser 250 — covering all variants including the Prado, FJ250, and the limited 1958 First Edition. Formed from premium stainless steel with a polished silver finish, the strip sits flush beneath the headlight cluster, adding visual weight and a refined chrome-adjacent accent without looking afterthought or overdressed. The adhesive paste installation method means no drilling, no cutting, and no risk to the original bodywork. It bonds cleanly to the factory surface and sits with the precision of a factory-fitted trim — because the fit tolerance was developed specifically for this generation of Land Cruiser. If you care about the details of your LC250, this is the kind of modification that rewards that attention. What's Included ✦ Headlight Below Decorative Strip 1 piece · Stainless steel · Silver polished finish 🔧 Installation Adhesive Pre-applied or included paste · No tools required 📄 Installation Instructions Step-by-step fitting guide included in package Product Highlights Engineered exclusively for the 2024–2025 Toyota Land Cruiser 250 platform Compatible with all LC250 trim grades including Prado, FJ250 and 1958 First Edition Premium stainless steel construction — resistant to rust, UV, and temperature fluctuation Polished silver finish that complements the factory chrome and dark trim accents Precision-formed contours for a flush, factory-coherent fit against the headlight aperture No-drill adhesive paste installation — fully reversible with no damage to original paint Enhances the front fascia's visual definition and perceived quality at street level Lightweight stainless construction adds no meaningful mass to the vehicle Designed to retain visual integrity across all weather conditions and wash cycles Manufactured to exacting tolerances — no gaps, no flex, no rattling once fitted Compatibility Vehicle Year Variant / Grade Fit Toyota Land Cruiser 250 (LC250) 2024 All grades Direct Fit Toyota Land Cruiser 250 (LC250) 2025 All grades Direct Fit Toyota Land Cruiser Prado (LC250-based) 2024–2025 Prado variants Direct Fit Toyota FJ250 2024–2025 FJ250 Direct Fit Toyota Land Cruiser 1958 First Edition 2024–2025 1958 First Edition Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All grades Not Compatible Toyota Land Cruiser 200 (LC200) Pre-2022 All grades Not Compatible Toyota Land Cruiser 70 Series Any All grades Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  |  🔧 Difficulty: Beginner Thoroughly clean the lower headlight surround area with an isopropyl alcohol wipe, removing all wax, grease, and road film. Allow to dry completely before proceeding. Dry-fit the decorative strip against the headlight aperture to confirm alignment and familiarise yourself with the correct positioning before adhesive is applied. Peel the backing from the adhesive tape or apply the included paste evenly across the rear mounting surface of the strip — avoid the edges to prevent squeeze-out. Position the strip carefully from one end to the other, pressing firmly along the full length for 30–60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the fitment area to sustained water pressure. ⚠ Note: Ensure the vehicle surface temperature is between 10°C and 35°C during installation. Application in direct sunlight or extreme cold may compromise the adhesive bond. Verify your exact variant matches the listed compatible models before fitting. Complete Your LC250's Exterior Browse our full range of Toyota Land Cruiser LC250 exterior accessories — every piece is selected and tested to meet the standards LC250 owners expect. Shop LC250 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced on this page are the property of their respective owners and are used for fitment identification purposes only. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Styling Side Door Cover Strips — Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precision-moulded ABS door cover strips that sharpen the LC250's exterior profile while quietly defending your paintwork from everyday kerb-side contact and door dings. LC250 2024–2025 ABS Material Direct Fit Paint Protection No Drilling Gray & Black Exterior Trim Overview The Toyota Land Cruiser 250 Prado represents a significant step forward in the Land Cruiser lineage — a vehicle that blends genuine off-road capability with a considerably more refined, premium-feeling exterior. Owners of the 2024 and 2025 LC250 understand the importance of keeping that factory finish exactly as it left the production line, particularly along the door sills where everyday car parks and tight urban spaces pose a constant, low-level threat. These side door cover strips are engineered specifically to the body contours of the LC250 platform, sitting flush against the door panels with no gaps, no overhang, and no awkward fitment compromises. Moulded from high-grade ABS plastic and available in both Gray and Black, they integrate naturally with the LC250's exterior language — adding a purposeful, layered appearance that looks deliberate rather than aftermarket. Beyond aesthetics, the core function here is protection. The strips create a resilient contact buffer across the full length of each door, absorbing minor impacts from wayward trolleys, neighbouring car doors, and trail debris before they reach the painted surface beneath. It is the kind of understated modification that you will notice only when you realise your doors still look factory-fresh two years down the road. What's Included 🚪 Side Door Cover Strips Full set — all four doors covered 🔧 Pre-Applied Adhesive Tape 3M-grade mounting tape pre-fitted to each strip 🧹 Surface Prep Wipes Alcohol cleaning wipes for optimum adhesion 📋 Installation Guide Step-by-step printed fitment instructions Product Highlights Precision-moulded to match LC250 door panel curvature exactly High-grade ABS construction — impact-resistant and UV-stable Available in Gray and Black to suit both standard and dark exterior trims No drilling, no cutting — fully adhesive no-damage installation Protects paint from door dings, trolley strikes, and trail debris Flush fitment creates a seamless, factory-integrated appearance Enhances door panel depth and exterior visual presence Pre-applied 3M-grade tape ensures a long-lasting, secure bond Resistant to car wash environments and temperature fluctuations Reversible fitment — removable without damage to paintwork Compatibility Vehicle Code Year Range Fitment Toyota Land Cruiser 250 Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔩 Tools Required: None Park the vehicle in a shaded area or indoors — direct sunlight and extreme temperatures affect adhesive performance during fitment. Thoroughly clean each door panel with the supplied alcohol prep wipes, removing all wax, polish residue, and surface contaminants. Allow to dry completely. Dry-fit each strip to its corresponding door to confirm alignment before removing the adhesive backing. Starting from one end, carefully peel the adhesive backing while pressing the strip firmly along the door panel, working progressively to avoid air pockets. Apply firm, even hand pressure along the full length of each strip for 30–60 seconds to activate the adhesive bond. Allow a minimum of 24 hours before washing the vehicle or exposing the strips to sustained moisture. ⚠ Important: Do not attempt installation if ambient temperature is below 10°C (50°F). Cold conditions significantly reduce initial adhesive tack and can compromise long-term bond strength. Ensure all prep wipes have fully evaporated before applying strips. Complete Your LC250 Build These door cover strips are just the beginning. Explore the full Victorious range of Toyota Land Cruiser LC250 exterior accessories — every product engineered to the same standard of fit and finish. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Door Card Protection Covers – Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precision-engineered stainless steel door card covers that shield your LC250's interior panels from daily wear while adding a refined, factory-appropriate finish. LC250 Prado 250 2024–2025 Stainless Steel Black / Silver Interior Protection No-Drill Install Direct Fit Overview The Toyota Land Cruiser 250 — known globally as the Prado LC250 — represents a significant leap forward in the Land Cruiser lineage. Launched for the 2024 model year, the LC250 blends serious off-road capability with a noticeably more premium interior. For owners who've invested in this vehicle, maintaining that interior quality from day one isn't just an aesthetic choice — it's a practical one. Door card panels are among the highest-contact surfaces inside any SUV. Entry and exit cycles, incidental scuffs from keys, bags, and footwear all take a toll on exposed trim over time. These door card protection covers are purpose-built for the 2024–2025 LC250, wrapping critical panel zones in precision-cut stainless steel that absorbs the contact your original trim shouldn't have to. Available in Black or Silver, each set integrates cleanly with the LC250's existing interior language — sitting flush against the door panels without any modification to original components. The adhesive-backed installation system is clean, residue-free on removal, and takes minutes to complete. For owners who expect their interior to look as good in five years as it does today, this is an essential addition from the moment of delivery. What's Included 🚪 Door Card Cover Set Full set covering all applicable door panel zones 🔧 Pre-Applied Adhesive Strips 3M-grade adhesive backing for secure, clean fitment 🧽 Surface Prep Wipes Alcohol wipes for panel cleaning prior to installation 📋 Installation Guide Step-by-step printed instructions included in packaging Product Highlights Custom-designed exclusively for the 2024–2025 Toyota Land Cruiser LC250 Prado Premium stainless steel construction resists corrosion, warping, and discolouration Available in Black or Silver to complement both light and dark interior trims No drilling, cutting, or modification to original door panels required Adhesive installation system bonds securely without damaging factory surfaces Flush fitment preserves the OEM aesthetic without visual bulk or misalignment Protects against scuffs, scratches, and daily contact wear on door card trim Does not interfere with window controls, handles, or any original functions Easy to clean — wipe down with a damp cloth, no special products needed Engineered to maintain a like-new interior appearance for the life of the vehicle Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser 250 / Prado LC250 2024–2025 All Trim Levels Direct Fit Toyota Land Cruiser 300 / LC300 2021–2025 All Trim Levels Not Compatible Toyota Land Cruiser 200 / LC200 2008–2021 All Trim Levels Not Compatible Toyota Land Cruiser 150 / Prado LC150 2009–2023 All Trim Levels Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Begin with the vehicle parked on a level surface with all doors fully open and interior lighting adequate for visibility. Use the included alcohol prep wipes to thoroughly clean each door panel zone where the covers will be applied. Allow 2–3 minutes for surfaces to dry completely before proceeding. Dry-fit each cover against the door panel to confirm alignment and positioning before committing to adhesion. Note the correct orientation for each piece. Peel back the adhesive liner slowly from one end, beginning at a corner. Avoid touching the adhesive surface with fingers. Align the cover carefully against the panel from one edge, then press firmly and evenly across the full surface, working from the centre outward to eliminate any air pockets. Apply firm pressure across the entire cover for a minimum of 30 seconds to activate the adhesive bond fully. Repeat the process for each remaining door. Allow 24 hours before any heavy contact or cleaning for optimal adhesive cure. ⚠ Important: Do not install in temperatures below 10°C (50°F) as adhesive performance may be significantly reduced. Ensure panel surfaces are completely free of wax, polish, or silicone-based dressings before application. These covers are designed for interior use only and should not be exposed to prolonged moisture. Complete Your LC250 Interior Explore the full range of Toyota Land Cruiser LC250 interior accessories at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Images are for illustrative purposes only — minor variations in finish may occur between production batches.

Product Description: Enhance your vehicle's interior with these sleek door card inserts, tailored specifically for 2024-2025 models. Designed for style and protection, they are a must-have for any car enthusiast. Product Highlights: Available in fiber pattern, black, or silver finishes for an aesthetic upgrade. Precision fit to shield original panels from scratches and wear. Effortless paste installation ensures a seamless look. Product Specifications: Compatibility: LC250 models (2024-2025) Material: High-quality ABS material Package Includes: Set of door card inserts Notes: Check compatibility with your vehicle model before installation. Professional installation is recommended for optimal results.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Metal Key Shell Leather Case for Toyota Land Cruiser 250 Prado LC250 — 2024–2025 A precision-fitted aluminum alloy and TPU key case that elevates the feel of your LC250's key fob while shielding it from everyday scratches, drops, and wear. LC250 Land Cruiser 250 2024–2025 Aluminum Alloy TPU Construction Direct Fit Gray & Silver Interior Upgrade Overview The Toyota Land Cruiser 250 — known globally as the Prado LC250 — is a vehicle built around capability, refinement, and longevity. Whether you're navigating urban environments or traversing remote terrain, every detail of the ownership experience matters. Your key fob is one of the most-handled components of your daily routine, and it deserves the same level of attention as the rest of your interior. This metal key shell case is engineered exclusively for the 2024–2025 Land Cruiser 250 key fob, ensuring a seamless, rattle-free fitment with no trimming or modification required. The dual-material construction — aircraft-grade aluminum alloy on the exterior and flexible TPU lining on the inside — creates a protective shell that absorbs impact without adding unwanted bulk. Available in understated gray and silver finishes that complement the LC250's premium interior palette. Beyond protection, this case transforms the tactile experience of holding your key. The metal shell introduces a satisfying weight and a premium look that replaces the standard plastic housing with something that feels genuinely considered. It's a small upgrade that makes a noticeable difference every time you reach into your pocket. What's Included 🔑 Metal Key Shell Case 1 unit — aluminum alloy + TPU construction, LC250-specific fitment 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights Precision-fit design specifically engineered for 2024–2025 Land Cruiser 250 (LC250) key fobs Dual-material build — rigid aluminum alloy shell with flexible TPU interior lining Guards against scratches, scuffs, drops, and everyday pocket wear No tools required — snap-on installation takes under a minute Available in refined gray and silver finishes to match your interior trim Lightweight design adds minimal bulk while significantly improving key feel All buttons, emergency key slot, and key ring port remain fully accessible TPU inner lining prevents rattling and protects the key fob's internal electronics Tactile metal exterior delivers a premium, weighted feel in hand Durable long-term construction — resists corrosion, fading, and UV degradation Compatibility Vehicle Year Range Key Type Fitment Toyota Land Cruiser 250 (Prado LC250) 2024–2025 Standard Smart Key Fob Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 Different Key Profile Not Compatible Toyota Land Cruiser 200 Series Pre-2021 Older Key Format Not Compatible Toyota Prado 150 Series Pre-2024 Different Key Profile Not Compatible Toyota RAV4 / Hilux / Other Models All Years Various Not Compatible Installation Notes 🔧 Difficulty: Very Easy  |  ⏱ Estimated Time: Under 2 Minutes  |  🛠 Tools Required: None Remove your existing key fob from any existing case or holder if applicable. Separate the two halves of the metal key shell case by gently flexing the TPU-lined interior section. Place the key fob electronics into the lower half of the case, aligning the button cutouts and key ring port carefully. Press the upper shell half firmly onto the lower section until you hear or feel a secure snap-fit engagement around the perimeter. Test all buttons and the emergency blade release to confirm full functionality and unobstructed access before use. ⚠ Important: Before purchasing, confirm your LC250 key fob matches the 2024–2025 Land Cruiser 250 key profile. Key fob designs can vary by market and region. If you are unsure of your key model, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will assist you in confirming compatibility. Shop the Full LC250 Interior Collection Explore our complete range of Toyota Land Cruiser LC250 interior accessories — hand-selected for owners who refuse to compromise on quality or detail. Browse LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Please verify key fob compatibility with your specific vehicle before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Seat Adjustment Panel Cover — Toyota Land Cruiser LC250 Prado (2024–2025) A precision-fit ABS trim cover in a carbon fibre-style finish that upgrades the seat adjustment panel of your LC250, protecting the original surface while adding a clean, purposeful aesthetic to the cabin. LC250 Land Cruiser 250 2024–2025 Prado First Edition ABS Material Fibre Pattern Finish LHD Only No-Drill Install Interior Trim Overview The Toyota Land Cruiser LC250 Prado is one of the most capable and well-appointed SUVs on the market — a vehicle that rewards owners who take the interior just as seriously as the off-road hardware. The cabin of the 2024 and 2025 LC250 is notably refined, and details like the seat adjustment panel are exactly the kind of surface that benefits from a considered trim upgrade. This seat adjustment panel cover is engineered to sit flush over the factory panel, offering a carbon fibre-style aesthetic through its precision-textured ABS construction. The result is a surface that reads as intentional and upscale — consistent with the elevated interior language of the LC250 First Edition and standard variants alike. Where the OEM panel can appear plain against the rest of the cabin, this cover introduces visual depth and a tactile quality that feels considered rather than added-on. Installation requires no tools, no drilling, and no modification to your vehicle. The adhesive-backed design bonds cleanly to the original panel and holds firmly without any risk to the underlying surface. For LC250 owners looking to personalise their interior in a subtle but meaningful way, this is one of the most straightforward upgrades available. What's Included 🪑 Seat Adjustment Panel Cover 1 × full kit, fibre pattern ABS finish 🔧 Pre-Applied Adhesive Ready-to-install, no tools required 📄 Installation Guide Step-by-step fitting reference Product Highlights Precision-engineered for LC250 Prado 2024–2025 seat adjustment panel Premium ABS construction with carbon fibre-style textured finish Direct-fit design — no drilling, no cutting, no modification required Pre-applied adhesive backing for a clean, secure bond Protects the OEM panel from daily wear, scratches, and scuffs Adds visual depth and a purposeful aesthetic to the cabin interior Designed and tested for Left Hand Drive (LHD) LC250 models Compatible with LC250 First Edition and standard variants Slim, low-profile fitment — no interference with seat adjustment function Reversible installation — OEM panel remains intact beneath the cover Compatibility Vehicle Year Range Drive Trim Level Fitment Toyota Land Cruiser LC250 Prado 2024–2025 LHD Standard Direct Fit Toyota Land Cruiser LC250 Prado 2024–2025 LHD First Edition Direct Fit Toyota Land Cruiser LC250 Prado 2024–2025 RHD All Variants Not Compatible Toyota Land Cruiser LC300 2022–2025 All All Variants Not Compatible Toyota Land Cruiser LC200 Pre-2022 All All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure the seat adjustment panel surface is clean, dry, and free from any dust, oil, or residue. Use an isopropyl alcohol wipe for best adhesion results. Remove the protective film from the adhesive backing on the seat adjustment panel cover. Carefully align the cover against the OEM panel, checking the fit before making contact with the adhesive surface. Press the cover firmly into position, applying even pressure across the full surface for 30–60 seconds to ensure a secure bond. Allow the adhesive to cure for a minimum of 30 minutes before operating the seat adjustment controls. ⚠ Important: This cover is designed exclusively for Left Hand Drive (LHD) LC250 models. Do not attempt to fit to Right Hand Drive vehicles — panel geometry differs and fitment will not be correct. Ensure the vehicle interior is at room temperature during installation; adhesive performance is reduced in cold conditions. More for Your Land Cruiser LC250 Browse the full range of interior and exterior accessories curated specifically for the Toyota Land Cruiser LC250 Prado — every product selected and tested for direct fit and quality that matches the vehicle's calibre. Shop All LC250 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Trim Rear Window Chrome Strip for Toyota Land Cruiser 250 Prado LC250 2024–2025 A precision-cut stainless steel chrome accent strip that frames the rear window of your LC250 Prado with a refined, factory-grade finish — available in Silver and Black. LC250 Prado 250 2024–2025 Stainless Steel Chrome Trim Rear Window Silver & Black Adhesive Fit Exterior Upgrade Overview The Toyota Land Cruiser 250 Prado is one of the most capable and visually commanding SUVs on the market today. Introduced for the 2024 model year, the LC250 delivers a sharper, more refined silhouette compared to its predecessor — and owners who care about the finer details know that the exterior trim makes all the difference between stock and something special. This rear window chrome strip has been designed specifically for the 2024–2025 Land Cruiser 250 Prado, cut to the exact profile of the rear glazing aperture. Manufactured from high-grade stainless steel with a polished or blacked-out finish, it adds a precise accent line that elevates the rear of the vehicle without overwhelming its clean design language. The adhesive-backed fitment means no drilling, no cutting, and no permanent modification to your vehicle. Whether you're building out a premium street presence or simply finishing the exterior to a higher standard, this chrome trim strip is one of those upgrades that looks like it was always meant to be there. What's Included 📦 Rear Window Chrome Strip × 1 Stainless steel, pre-cut for LC250 rear window aperture 🔧 3M Adhesive Pre-Applied Strong automotive-grade adhesive backing for permanent bond 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-cut to match the exact rear window profile of the 2024–2025 LC250 Prado High-grade stainless steel construction resists corrosion, rust, and UV fade Available in polished Silver and matte/gloss Black to suit your build style Adhesive installation — no drilling, no tools required, no damage to paintwork Enhances the visual grade of the rear exterior with a factory-premium aesthetic Protects the window surround edge from minor stone chips and surface abrasion Lightweight and low-profile — no impact on visibility or aerodynamics Direct-fit design ensures seamless alignment with the vehicle's body lines Colour-matched options allow coordination with chrome or blacked-out trim packages Compatible with both LHD and RHD Land Cruiser 250 Prado variants Compatibility Vehicle Code Year Range Fitment Toyota Land Cruiser 250 Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean the rear window surround area with an alcohol-based panel wipe or isopropyl alcohol (IPA) to remove all wax, grease, and dust. Allow to dry fully before proceeding. Dry-fit the chrome strip against the rear window aperture to confirm alignment and check the contour sits flush along its full length. Carefully peel back a small section of the adhesive backing tape — do not remove the entire backing at once. Starting from one end, progressively press the strip into position, peeling the backing as you go and maintaining firm, even pressure along the entire length. Once fully positioned, apply sustained firm pressure across the strip for 30–60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain, washing, or extreme temperatures. ⚠ Note: Do not attempt installation in direct sunlight or in temperatures below 10°C / 50°F, as this will reduce adhesive performance. Ensure the panel is completely dry before applying. Once the strip is pressed into position, reposition attempts may weaken the adhesive bond. Complete Your LC250 Exterior Build Browse the full range of Toyota Land Cruiser 250 Prado exterior accessories at Victorious — from body trim upgrades to protective finishing touches, all sourced and quality-checked for the 2024–2025 LC250. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Second Row Seat Bottom Protective Cover for Toyota Land Cruiser 250 Prado – LC250 2024–2025 A precision-engineered ABS seat base surround that shields your LC250's second row from daily wear while adding a sharp, textured finish to the cabin interior. LC250 Prado 2024–2025 ABS Material Fiber Pattern Finish Direct Fit No Drilling Required Interior Trim Seat Protection Overview The Toyota Land Cruiser 250 — sold in many markets as the new Prado — represents Toyota's most significant rethink of the iconic nameplate in years. With a thoroughly modernised interior, those who have invested in an LC250 understand how important it is to keep that cabin looking exactly as it left the factory floor. The second row seating area in particular sees considerable daily use, and the exposed base surrounds are among the first surfaces to show signs of scuffing, grime accumulation, and finish degradation. These Second Row Seat Bottom Protective Covers are designed exclusively for 2024 and 2025 Toyota Land Cruiser 250 and Prado LC250 models. Manufactured from durable ABS plastic with a premium carbon-style fibre pattern finish, they sit flush over the existing seat base panels — protecting the original trim from wear while introducing a purposeful, textured aesthetic that complements the vehicle's interior design language. Installation requires no tools, no drilling, and no specialist knowledge. The covers attach cleanly via adhesive tape to the existing surface, making the process straightforward and completely reversible. Whether you use your LC250 as a daily driver, a family hauler, or a capable overland machine, these covers are a practical and visually considered upgrade to one of the cabin's most overlooked areas. What's Included 🪑 Seat Bottom Cover Set 1 x full second row protective set, precision-moulded for the LC250 🔧 Pre-Applied Adhesive Tape High-bond 3M-style mounting tape included for secure fitment 📋 Installation Guide Step-by-step instructions for a clean, aligned install Product Highlights Engineered exclusively for the 2024–2025 Toyota Land Cruiser 250 / Prado LC250 Premium ABS construction — resistant to cracking, warping, and daily knocks Carbon-style fibre pattern finish elevates the interior's visual quality Precision moulded for a seamless, factory-matched fit Protects original seat base trim from scuffs, scratches, and staining No drilling, no cutting — fully adhesive installation in minutes Residue-free removal possible — original trim is fully preserved underneath Easy to wipe clean and maintain with standard interior care products Lightweight design adds no perceptible bulk or obstruction to seat function Ideal for owners using their LC250 as a family vehicle, daily driver, or off-road tourer Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (LC250) LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 J150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–25 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked on a level surface. Fold or move the second row seats as needed to gain clear access to the seat base surrounds. Thoroughly clean the seat base panel surfaces using an isopropyl alcohol wipe or equivalent interior panel cleaner. Remove all dust, grease, and residue. Allow to dry completely before proceeding. Dry-fit each cover piece against the seat base surround to confirm alignment and check coverage before committing to adhesion. Peel back the protective film from the pre-applied adhesive tape on the reverse of each cover piece. Carefully align the cover piece with the seat base panel and press firmly into position, applying even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure for at least 1–2 hours before regular use. Avoid applying direct pressure to the covers during this period. ⚠ Important: Surface preparation is critical for long-term adhesion. Do not install on damp, oily, or dusty surfaces. Installing in a warm environment (above 15°C / 59°F) will significantly improve adhesive bond strength. Do not use solvent-based cleaners directly on the ABS cover surface as this may damage the finish. Complete Your LC250 Interior Browse the full range of Toyota Land Cruiser LC250 interior and exterior accessories at Victorious Automotive — trusted by over 12,300 enthusiasts worldwide with a 4.9/5 star rating. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used for fitment and compatibility identification purposes only. Product images are representative; minor variations in finish may occur between production batches.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Trim Front Windscreen Chrome Window Strip — Toyota Land Cruiser 250 Prado LC250 (2024–2025) A precision-fitted stainless steel chrome accent strip that sharpens the roofline and windscreen surround of the LC250 Prado — available in silver or black finish. LC250 / Prado 250 2024–2025 Stainless Steel Chrome Finish Silver & Black Paste-On Install Exterior Trim No Drilling Overview The Toyota Land Cruiser 250 — sold in many markets as the Prado LC250 — is one of the most significant off-road and luxury SUV launches of the decade. With its bold, angular bodywork and refined interior, the LC250 has reset expectations for what a modern Prado can be. Owners who choose this vehicle are discerning — they value detail, durability, and the confidence that every element of their truck has been chosen with care. This front windscreen chrome strip has been developed specifically to complement the LC250's windscreen surround and A-pillar profile. Crafted from high-grade stainless steel, it adds a precisely defined chrome accent along the front window trim line — elevating the exterior from standard to genuinely distinguished. Whether you opt for classic silver chrome or the increasingly popular black finish, the result is a vehicle that looks considered and complete. The adhesive paste installation system means there is no drilling, no cutting, and no risk of damaging factory paint or seals. Clean the surface, align the strip, and bond it in place — the result holds firmly through extremes of temperature, rain, and road dust that LC250 owners will encounter whether they're crossing a city or a continent. What's Included 🪟 Front Windscreen Chrome Strip × 1 Pre-cut stainless steel trim piece, ready to install 🔧 Adhesive Backing Pre-applied 3M-style tape for secure, clean bonding 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Engineered specifically for the Toyota Land Cruiser 250 / Prado LC250 windscreen surround profile Premium stainless steel construction — corrosion-resistant and built to last Available in silver chrome and gloss black to suit your LC250's colour and spec No-drill adhesive installation — no damage to factory paintwork or seals Pre-formed to match the exact curvature of the LC250 A-pillar and window trim Weather-resistant finish — unaffected by UV, rain, road salt, or temperature swings Adds a defined, premium edge to the windscreen surround without looking aftermarket Complements other chrome or black exterior trim upgrades on the LC250 platform Reversible — can be removed cleanly without marking factory surfaces if required Packaged securely to arrive scratch-free and installation-ready Compatibility Vehicle Code Years Fit Toyota Land Cruiser 250 Prado LC250 / FJ250 2024, 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean the windscreen surround and A-pillar trim area using an isopropyl alcohol wipe. Remove all dust, wax, and residue — adhesion depends entirely on a clean, dry surface. Allow the surface to dry completely. In cold conditions, allow the vehicle exterior to reach at least 15°C before proceeding — this ensures maximum bond strength. Dry-fit the chrome strip without removing the adhesive backing to confirm alignment and positioning before committing. Peel back a small section of the adhesive liner from one end of the strip. Begin aligning from one corner of the windscreen surround, pressing firmly as you work along the length. Once fully positioned, apply firm, even pressure along the entire length of the strip for 30–60 seconds to activate the adhesive bond. Allow a minimum of 2 hours before driving or exposing to rain, to ensure the bond has cured fully. Note: Do not apply in direct sunlight or on an extremely hot surface — this can cause the adhesive to cure too quickly and affect alignment. If removing the strip at any stage, use a plastic trim removal tool and apply gentle heat from a hair dryer to soften the adhesive rather than pulling forcefully. Complete Your LC250 Exterior This chrome windscreen strip pairs beautifully with our full range of Toyota Land Cruiser LC250 exterior accessories — from bonnet trim to mirror covers. Explore everything we offer for the LC250 platform and build out the exterior finish your Prado deserves. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. Toyota, Land Cruiser, Prado, and LC250 are trademarks of Toyota Motor Corporation. All references are for fitment compatibility purposes only.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Interior Door Handle Protection Kit – Toyota Land Cruiser 250 / Prado LC250 (2024+) Precision-moulded ABS door handle guards that shield your LC250's interior from daily scratches, scuffs, and wear — without touching a single tool. LC250 Prado 250 2024+ ABS Material Carbon Fibre Pattern Silver Finish Anti-Scratch No-Drill Install Interior Accessory Overview The Toyota Land Cruiser 250 — also marketed as the Prado LC250 in select markets — represents a significant step forward in Toyota's legendary 4x4 lineage. With a redesigned interior that places greater emphasis on premium materials and clean surfaces, it's an environment worth protecting from day one. Every time a hand reaches for a door handle, that surrounding trim is at risk of micro-scratches, fingernail marks, and progressive surface dullness. This interior door handle protection kit is engineered specifically for the LC250's cabin geometry. Formed from high-grade ABS plastic with a precision surface finish, each guard sits flush against the door panel surround and acts as a barrier between daily use and your vehicle's factory trim. Available in a Carbon Fibre Pattern for a sportier look, or a clean Silver finish for those who prefer a more understated, OEM-adjacent aesthetic. Unlike generic fitments, these guards are designed to align exactly with the LC250's existing panel contours and factory hole positions — preserving the original lines of the interior without compromise. The peel-and-stick installation method means no drilling, no damage, and no residue. Clean, confident, and built to last. What's Included 🛡️ Door Handle Protection Kit Full set of interior door handle guards for LC250 🔧 Pre-Applied Adhesive 3M-grade adhesive backing — no tools required 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Custom-moulded to fit the Toyota Land Cruiser 250 / Prado LC250 exactly High-grade ABS construction — rigid, lightweight, and durable Anti-scratch surface coating protects both guard and surrounding trim Available in Carbon Fibre Pattern or Silver — two distinct aesthetics Preserves all factory hole positions and interior panel lines No-drill, no-cut paste-on installation — clean and reversible Protects against daily fingernail marks, keys, and general abrasion Seamless flush fitment — looks factory-integrated, not aftermarket UV-stable finish — won't fade, yellow, or degrade in cabin heat Ideal for both personal ownership and fleet/lease vehicle protection Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024 onwards Direct Fit Toyota Land Cruiser Prado (LC250 Generation) Prado 250 2024 onwards Direct Fit Toyota Land Cruiser 300 Series LC300 2021 onwards Not Compatible Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 LC150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin with all four door panels accessible. Ensure the vehicle has been parked and interior surfaces are at room temperature. Thoroughly clean the door handle surround areas with an isopropyl alcohol wipe or a lint-free cloth with a mild interior cleaner. Remove any grease, dust, or residue that may compromise adhesion. Allow the surfaces to dry completely — at least 5 minutes — before proceeding. Do not rush this step. Dry-fit each guard against its corresponding panel to confirm alignment with factory contours and any pre-existing hole positions before peeling the adhesive backing. Peel the adhesive backing from the first guard and carefully align it in position, starting from one edge and pressing progressively to avoid air bubbles. Apply firm, even pressure across the entire surface of each guard for 30–60 seconds to activate the adhesive bond fully. Repeat for all remaining guards. Allow 2–4 hours before the first use for the adhesive to fully cure. ⚠ Important: Do not install in cold or damp conditions — adhesive performance is significantly reduced below 10°C or on surfaces with any moisture present. For best results, install indoors at ambient temperature. Complete Your LC250 Interior Browse the full range of Toyota Land Cruiser 250 accessories at Victorious Automotive — trusted by 12,300+ owners worldwide with a 4.9-star rating and a 30-day money-back guarantee. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL / FedEx / UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota LC250 · Interior Protection Door Sill Protection Cover for Toyota Land Cruiser 250 Prado LC250 2024–2025 Custom-moulded ABS door sill guards with carbon-fibre pattern finish — designed to shield the LC250's original entry panels from daily scuffs, scratches, and wear. LC250 / Prado 2024–2025 ABS Plastic Carbon Fibre Pattern Direct Fit Adhesive Install Interior Protection No Drilling Required Overview The Toyota Land Cruiser 250 — sold internationally as the Prado LC250 — represents one of the most anticipated 4x4 launches in recent years. Its redesigned interior raises the bar for refinement in the segment, making it all the more important that high-contact areas like the door sills are properly protected from day one. The entry point of any door is one of the first places to show wear, and the LC250's wide cabin openings mean the sills take a regular battering from boots, equipment, and everyday loading. These door sill protection covers are precision-engineered to fit the 2024 and 2025 Toyota Land Cruiser 250 Prado exactly. Manufactured from high-grade ABS plastic and finished in a sophisticated carbon-fibre-effect pattern, they sit flush against the original sill panel and act as a sacrificial layer between your vehicle's trim and the outside world — absorbing the scuffs and scratches that would otherwise mark your factory finish permanently. Installation is entirely tool-free. Each cover uses a robust automotive-grade adhesive backing that bonds cleanly to the original sill surface, leaving no damage on removal. The result is a factory-finish appearance that simultaneously upgrades the interior aesthetic and maintains the long-term condition of your LC250's bodywork — exactly the kind of detail that protects resale value over time. What's Included 🛡️ Door Sill Cover Set Full set covering all door entry points 🔧 Adhesive Tape Pre-Applied Automotive-grade backing, no tools needed 📋 Installation Guide Step-by-step fitting instructions included 🧹 Cleaning Prep Wipe Surface prep included for optimal adhesion Product Highlights Precision-moulded for a flush, factory-finish fit on the LC250 Prado High-grade ABS construction — durable, lightweight, and impact-resistant Carbon-fibre pattern finish elevates interior aesthetics Protects original factory sill panels from permanent scratching Tool-free installation via automotive-grade adhesive backing No drilling, cutting, or modification required Removable without damage to original trim surface Resistant to UV fading, moisture, and daily wear Helps preserve interior condition and long-term resale value Compatible with both 2024 and 2025 model year LC250 builds Compatibility Vehicle Model Code Years Fit Toyota Land Cruiser 250 (Prado) LC250 2024, 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 (Prado) LC150 2009–2023 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–25 Minutes  |  🛠 Tools Required: None Begin by thoroughly cleaning each door sill panel using the included prep wipe or isopropyl alcohol. Ensure all dust, wax, and grease residue is removed before proceeding. Allow the surface to dry completely for a minimum of 5 minutes at room temperature. Do not attempt installation in cold or damp conditions. Dry-fit each cover in position first to confirm alignment before removing any adhesive backing. Peel back the adhesive tape and carefully position the cover from one end, pressing firmly along the full length as you lay it down to prevent air bubbles. Apply sustained firm pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure for at least 2–4 hours before the vehicle is used or exposed to moisture. ⚠ Note: For best adhesion results, install at temperatures above 15°C (59°F). Avoid cleaning the sill covers with solvent-based products after fitting, as this may degrade the adhesive bond over time. Protect Your LC250 From Day One The interior of your Land Cruiser 250 deserves to stay in the same condition it left the showroom. These door sill covers are one of the smartest first upgrades you can make — invisible in the right way, and working hard every time a door opens. Shop All LC250 Interior Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Badging Body Logo Decoration for Toyota Land Cruiser 250 Prado LC250 – 1958 First Edition Style (2024–2025) Elevate the exterior presence of your LC250 with precision-crafted body lettering and logo decoration finished in silver or gold — a subtle upgrade that makes an unmistakable statement. LC250 Land Cruiser 250 Prado 2024 – 2025 ABS Material Silver & Gold Finish Adhesive Fit 1958 First Edition Exterior Badging No Drilling Overview The Toyota Land Cruiser 250 — known globally as the Prado LC250 — represents a return to form for the nameplate: rugged capability wrapped in a more refined, modern silhouette. It's a vehicle with genuine heritage, and the 1958 First Edition trim pays direct homage to the original Land Cruiser lineage that made this name legendary. Owners who choose the LC250 aren't just buying a vehicle — they're investing in a statement of purpose and provenance. This body logo decoration set has been designed specifically for the 2024 and 2025 LC250 to complement that heritage narrative. The lettering and logo pieces are precision-moulded from durable ABS and finished in either polished silver or warm gold to integrate naturally with the vehicle's existing trim lines. Available in a 1958 First Edition configuration, these pieces draw a visual thread between the modern LC250 and the vehicle that started it all over six decades ago. Installation requires no drilling, no cutting, and no professional fitting — a quality 3M-style adhesive backing bonds firmly to the bodywork and holds securely through all weather conditions. Whether you're adding a touch of distinction to a daily driver or refining a show-ready build, this is one of the cleanest exterior upgrades available for the LC250 platform. What's Included 🔠 Body Logo Decoration Set 1 x full set of body lettering and logo pieces for the LC250 🔧 Pre-Applied Adhesive 3M-style adhesive backing pre-installed on each piece 📋 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Precision-moulded ABS construction for durability and exact fit Available in polished silver or warm gold finish options Designed specifically for the 2024–2025 Toyota LC250 Prado platform 1958 First Edition styling pays homage to the original Land Cruiser lineage No-drill adhesive installation — preserves factory bodywork integrity Weather-resistant finish — UV stable and moisture resistant Enhances exterior grade and visual distinction without modification Trim-matched design integrates with existing LC250 body lines Lightweight construction — no added load or stress on bodywork Reversible installation — removable without damaging factory paint Compatibility Model Code Year Range Fit Toyota Land Cruiser 250 Prado LC250 2024 – 2025 Direct Fit Toyota Land Cruiser 250 – 1958 First Edition LC250 2024 – 2025 Direct Fit Toyota Land Cruiser 300 Series LC300 2021 – 2025 Not Compatible Toyota Land Cruiser 200 Series LC200 2007 – 2021 Not Compatible Toyota Land Cruiser Prado 150 Series LC150 2009 – 2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–40 Minutes  ·  👤 No Professional Required Thoroughly clean the target area on the vehicle bodywork using an isopropyl alcohol wipe. Ensure the surface is completely free of wax, polish, grease, and moisture before proceeding. Dry fit each piece against the bodywork to confirm position and alignment. Use masking tape as a guide line if needed to ensure straight, even placement. Peel the protective backing from the adhesive on the first piece. Do not touch the adhesive surface with bare fingers. Press firmly into position starting from one end, applying steady even pressure along the full length of each piece for a minimum of 30 seconds. Repeat for each remaining piece, checking alignment against adjacent pieces before pressing down permanently. Allow a minimum of 24 hours before exposing the vehicle to water, rain, or a car wash. This curing period ensures a permanent bond. ⚠ Important: Installation should be performed at an ambient temperature above 15°C (59°F). Cold bodywork significantly reduces adhesive bonding strength. Do not attempt installation in direct sunlight or on a hot vehicle surface as this may cause premature adhesive activation and misalignment. Upgrade Your LC250 Today Join over 12,300 enthusiasts who trust Victorious Automotive to deliver premium exterior upgrades — backed by a 30-day money-back guarantee and worldwide DHL, FedEx, UPS, and TNT shipping. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars – 12,300+ Reviews 🌍 Worldwide Shipping – DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the property of their respective owners.