Products

Victorious Automotive · Toyota LC250 · Exterior Styling Upgraded Rear Spoiler for Toyota Land Cruiser 250 Prado LC250 2024–2025 A precision-engineered ABS spoiler that sharpens the roofline profile of the LC250, delivering a purposeful aesthetic upgrade with a factory-finish appearance. LC250 2024–2025 High-Grade ABS Direct Fit Adhesive Mount White / Black Exterior Styling Prado LC250 Overview The Toyota Land Cruiser 250 — sold in many markets as the Prado LC250 — represents a bold new generation of the iconic nameplate, combining modern SUV refinement with genuine off-road credibility. Its angular roofline and upright tailgate lend themselves naturally to a rear spoiler upgrade, where even a subtle addition makes a measurable visual difference from every angle. This upgraded spoiler has been designed from the ground up with the LC250's exact roofline geometry in mind. Unlike generic aftermarket alternatives, the contours follow the factory body curvature precisely — eliminating unsightly gaps or proud edges that can undermine an otherwise clean build. Manufactured from high-grade ABS thermoplastic, the spoiler is lightweight without compromise on structural rigidity, resisting warping, UV degradation, and the expansion cycles that come with daily outdoor use. Available in both Gloss Black and White, the finish is consistent and deep — ready for direct fitment or as a base for a professional colour-match paint job to your LC250's OEM code. Whether you're building an expedition-ready overlander or simply refining your daily driver, this spoiler adds a cohesive finishing touch that looks deliberate, not bolted-on. What's Included 🔲 Rear Spoiler Pre-formed ABS unit, vehicle-specific profile 🩹 3M Adhesive Tape Pre-cut, high-bond automotive-grade strips 📋 Fitment Guide Step-by-step installation instructions Product Highlights Engineered exclusively for the Toyota Land Cruiser 250 / Prado LC250 body shell High-grade ABS construction — lightweight, rigid, and UV-resistant Precision contour-matched to the LC250 roofline for a seamless fit Available in Gloss White and Gloss Black — both paint-ready No drilling required — clean adhesive-tape installation Factory-style appearance with no exposed fixings or visible hardware Resistant to temperature cycling, road vibration, and carwash chemicals Adds visual length and presence to the LC250's tailgate profile Ideal base for OEM colour-match respray for a fully integrated look Direct replacement or brand-new addition — suits stock and modified builds Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Prado LC250 LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Prado 150 Series J150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔧 Tools Required: None Thoroughly clean the spoiler mounting surface on the tailgate with isopropyl alcohol (IPA) — remove all wax, polish residue, and dust. Allow to dry fully. Dry-fit the spoiler against the roofline to confirm alignment and positioning before committing to adhesive placement. Peel the backing from the pre-cut 3M adhesive strips and apply evenly to the underside mounting flange of the spoiler. Carefully align the spoiler to the tailgate surface — work from the centre outward to avoid air pockets or misalignment. Apply firm, even pressure across the full length of the spoiler and hold for 60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain or high-pressure washing. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F) — cold surfaces significantly reduce adhesive bond strength. For a permanent finish, a professional installer can supplement the adhesive with automotive-grade panel adhesive or colour-matched sealant along the edges. Finish Your LC250 the Right Way At Victorious Automotive, every accessory we carry is selected for owners who refuse to settle. Whether you're building the ultimate overland rig or perfecting your daily drive, we've got the parts to get it right. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation, Land Cruiser, or any associated OEM brand. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious · Toyota Land Cruiser LC300 · Interior Storage Water Cup Storage Box 2021–2024 Toyota Land Cruiser LC300 Keep your LC300 cabin organised and clutter-free with this precision-engineered centre console storage solution. LC300 2021–2024 ABS Plastic Flocking Lined Dual Drive Overview The Toyota Land Cruiser LC300 deserves interior refinement that matches its adventure-ready capability. This Water Cup Storage Box fills the gap between your seats—literally and functionally—preventing loose items from disappearing into unreachable spaces while maintaining the clean, minimalist aesthetic that discerning LC300 owners demand. Engineered from durable ABS plastic with soft-touch flocking, this storage box sits flush with your seat frame and won't interfere with seat adjustment or reclining. It's the kind of thoughtful addition that transforms daily ownership: no more fishing for coins, pens, or small essentials. Available in beige or black to blend seamlessly with your interior colour scheme. Designed for both left and right-hand drive variants, this box installs without fasteners and is completely reversible. It's a five-minute upgrade that proves sometimes the best improvements are the simplest ones. What's Included 📦 Water Cup Storage Box Complete assembly, ready to install Product Highlights Keeps centre console organised and clutter-free Prevents items sliding into gaps between seats Compatible with both left and right-hand drive LC300s Soft-touch flocking interior protects cups and items Available in beige or black finishes Durable ABS plastic construction No tools required for installation Non-intrusive seat-mounted design Fully reversible if needed Factory-fit appearance and finish Compatibility Model Years Drive Status Land Cruiser LC300 2021–2022 LHD / RHD Direct Fit Land Cruiser LC300 2023–2024 LHD / RHD Direct Fit Land Cruiser LC250 All years LHD / RHD Not Compatible Other Land Cruiser models Pre-2021 Any Not Compatible Installation Difficulty: Beginner | Time: 5 minutes Open both front door panels and recline front seats fully forward to access the seat frame gaps. Position the storage box between the driver and passenger seats, ensuring it sits flush with the lower seat frame. Gently slide the box down until it catches and locks between the seat frames—no fasteners required. Test that the box is secure by applying gentle upward and lateral pressure. Adjust front seats to normal driving position and verify the box remains stable. Note: Confirm your LC300 model year and drive configuration before ordering. This box is designed exclusively for 2021–2024 LC300 models. If removing, store in a cool, dry place. Upgrade Your LC300 Interior Today Small details elevate ownership. This storage box is proof that thoughtful design doesn't require complexity—just precision engineering and attention to what matters. Shop LC300 Accessories Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, or Jaguar Land Rover. All trademarks, logos, and brand names are the property of their respective owners. This product is designed for aftermarket fitment and does not constitute an official Toyota or Land Rover product.

Victorious Automotive · Universal · Car Protection 5-Layer Universal Car Cover – Waterproof & UV Resistant for Sedan & SUV Military-grade all-weather protection for your vehicle, indoors and out. Blocks 80%+ UV rays, water pressure tested to 800mm, and shields against snow, dust, bird droppings, and road salt. 100% Waterproof UV Resistant 5-Layer Polyester Sedan & SUV Indoor & Outdoor S/M/L/XL Sizes Overview Whether you drive a luxury Range Rover, a practical Discovery, or any sedan or SUV up to 187 inches long, your vehicle deserves serious protection. This isn't your typical lightweight cover—it's a five-layer engineered barrier engineered to stand up to British weather and international elements. Built from premium polyester taffeta with military-grade water resistance (800mm water pressure rating), this cover stops rain, sleet, snow, and UV damage in their tracks. The 80%+ reflective summer finish keeps your paint cool when parked in direct sunlight. Winter? It shields against frost, snow accumulation, and road salt spray. The soft inner lining prevents scratching your clear coat, while the outer shell repels bird droppings, tree sap, dust, and airborne contaminants. At just 1kg and available in four sizes, it's light enough to deploy in seconds, yet durable enough to stay in place through wind and weather. Perfect for protected outdoor parking, long-term storage, or year-round garage use. What's Included 📦 5-Layer Car Cover Universal fit, S/M/L/XL 📋 Size Guide Card Measurement reference 🎯 Installation Tips Quick-start instructions 🛡️ 30-Day Guarantee Victorious Automotive promise Product Highlights 5-layer polyester taffeta construction with dual-protection design 800mm water pressure rating – tested against heavy rain and snow melt 80%+ UV reflectivity – keeps paint cooler in summer, blocks harmful rays Soft inner fleece lining – prevents scratches and swirls Fits sedans 360–490cm and SUVs up to 187 inches (460–480cm) Lightweight (1kg) for easy one-person deployment and removal Breathable weave prevents moisture and condensation buildup Elasticated hems and reinforced grommets for secure fitment Suits indoor storage, covered parking, or full outdoor exposure Available in S, M, L, and XL sizes – choose by vehicle length Sizing Guide Vehicle Type Size Vehicle Length Sedan S 360–420 cm Sedan M 420–450 cm Sedan L 450–475 cm Sedan XL 475–490 cm SUV M 420–460 cm SUV L 460–480 cm Installation & Care Deployment (2–3 minutes) Choose the correct size based on your vehicle's length from the guide above Park on level, clean ground away from sharp edges or protruding branches Unpack the cover and lay it flat on your vehicle's bonnet and roof Align the front grommets and secure elasticated hems under the bumper Pull the cover back evenly, securing side and rear hems under the rear bumper Check all edges are tucked and tight—no flapping in wind For outdoor storage, consider additional tie-down cords for high-wind areas Keep Clean: Remove heavy snow or leaf debris regularly to prevent weight buildup. Hose down with cool water monthly to remove dust and salt. Air dry before storage. Protect Your Investment Today Year-round weather protection, indoor or outdoor. Breathable, lightweight, proven. Choose your size and secure your vehicle against the elements—backed by our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back Guarantee ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ 4.9★ 12,300+ Reviews ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any OEM manufacturer. Vehicle names and model codes are used for compatibility reference only. All specifications, dimensions, and performance claims are based on manufacturer testing and real-world user feedback. Always verify size compatibility before purchase. See our full disclaimer at victorious.shop/legal.

Victorious · Universal · Interior Organizers Victorious Automotive Car Bin Organizer Keep your cabin clutter-free with a sleek, collapsible car trash bin designed for Land Rovers, Range Rovers, and Defenders. Universal Fit Interior Organizer Plastic Construction Pressing Type Rolling Cover Black · Dark Gray Overview Whether you're tackling a weekend expedition or managing daily commutes in your Land Rover, Discovery, or Defender, interior cleanliness matters. Crumbs, wrappers, and debris accumulate quickly in any premium cabin. This Victorious Car Bin Organizer solves that problem with a compact, discreet waste solution that blends seamlessly with modern automotive interiors. Engineered from durable plastic with a pressing-type design and convenient rolling cover lid, this bin keeps refuse contained and hidden from view. The round profile minimises dashboard or cupholderspace intrusion, while the collapsible construction allows for easy storage when not in use. Available in sleek black or dark gray to match your vehicle's aesthetic. Perfect for cup holders, door pockets, or console storage, this organiser serves double duty as a desktop waste bin for offices and workspaces. For the discerning enthusiast who refuses to compromise on cabin presentation, this is the upgrade you've been searching for. What's Included 🗑 Car Bin Organizer Rolling cover type, pressing operation 🎨 Colour Options Black or Dark Gray finish 📦 Ready to Install No tools or modifications needed Product Highlights Rolling cover lid design for quick and discreet waste disposal Compact round shape fits standard cup holders and console spaces Durable plastic construction withstands daily use and temperature changes Pressing-type mechanism—intuitive operation, no complicated mechanisms Collapsible design for convenient storage when travelling Blends seamlessly into Range Rover, Defender, and Discovery interiors Dual-purpose: car waste bin or office desktop organiser Available in black and dark gray to match your vehicle's tone Lightweight and non-intrusive—won't obstruct your driving space Easy to clean and maintain for long-term use Compatibility Model Vehicle Code Fitment Range Rover Sport L461 / L494 / L320 Universal Fit Range Rover Vogue L460 / L405 Universal Fit Defender L663 / 2004–2016 Universal Fit Land Rover Discovery 3 / 4 / 5 / Sport Universal Fit Range Rover Evoque L551 / L538 Universal Fit Range Rover Velar 2018–2022 Universal Fit Toyota Land Cruiser LC300 / LC250 Universal Fit Mercedes G-Class G-Wagon Universal Fit Jaecoo J7 J7 Universal Fit Installation & Use Installation Difficulty: Minimal This organiser requires no installation. Simply place it in your preferred location and begin using. Setup Steps Choose your preferred location: cup holder, door pocket, centre console, or desktop If using a cup holder, ensure the bin diameter fits snugly (round shape recommended for standard cup holders) For console placement, ensure it won't interfere with gear shift or controls Press the lid to open and dispose of waste Release the lid—it will roll shut automatically Empty contents as needed by lifting the bin and removing waste Pro Tip: Line the interior with a small plastic bag for easy emptying and maintenance. This prevents residue buildup and keeps your bin fresh between cleanings. Keep Your Cabin Pristine Maintain showroom condition inside your premium Land Rover or Range Rover with this elegant, practical car bin organiser. Discreet design. Intuitive operation. Built to last. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars · 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT UK support: +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Land Rover, Defender, or any official Land Rover entity. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is a third-party accessory designed for compatibility and enhancement only.

```html Victorious · Automotive Cleaning · Accessories Victorious Wireless Handheld Car Vacuum Hoover Ultra-portable cordless cleaning power for your cabin, seats, and hard-to-reach corners with 4KPA suction and wet-dry versatility. All Vehicles Cordless Handheld Wet & Dry 5000mAh Lithium 4KPA Suction Car Interior Cleaning Overview Whether you drive a Range Rover, Defender, Discovery, or any premium 4x4, maintaining a spotless interior is non-negotiable. Dirt, pet hair, dust, and spills accumulate in seats, footwells, and tight crevices—areas where traditional vacuum cleaners simply cannot reach. The Victorious Wireless Handheld Car Vacuum Hoover solves that problem with genuinely portable, powerful cordless cleaning engineered for automotive interiors. At just 550g and powered by a robust 4KPA motor, this handheld unit delivers consistent suction across carpets, upholstery, keyboards, and tight gaps. The 5000mAh lithium-ion battery provides up to 30 minutes of continuous use on a single charge—more than enough to detail a complete cabin. Crucially, it handles both dry debris and wet spills, with three interchangeable nozzles for different cleaning tasks. What sets this vacuum apart is its durability and versatility. The washable filter, durable construction, and wireless design mean you can tackle your cabin after a muddy adventure or a weekend of family travel without reaching for heavy corded equipment. Fully charged in just 2.5 hours via USB, it becomes an indispensable part of your detailing kit. What's Included 🔋 Portable Vacuum Cleaner Main unit with 5000mAh battery 🪥 Small Brush Nozzle For upholstery and tight spaces 🌪️ Suction Long Mouth Extended reach for floor mats and gaps 🧯 Extension Hose Reaches under seats and corners ⚡ USB Charging Cable Full charge in 2.5 hours Key Highlights 4KPA Powerful Motor – Thorough cleaning of floor debris, pet hair, dust, and fine particles Lightweight Design – Only 550g; ergonomic grip reduces hand fatigue during extended use 5000mAh Lithium Battery – Up to 30 minutes continuous runtime; 2.5-hour full charge Wet & Dry Capability – Handles both solid debris and liquid spills safely Three Nozzle Attachments – Brush, long mouth, and extension hose for diverse cleaning tasks 96% Cleaning Efficiency – High-performance suction captures 96% of particles Washable Filter – Durable, reusable filter reduces replacement costs Cordless Convenience – No tangled cables; clean anywhere in your vehicle or home Low Noise Operation – ≤70dB; won't disturb others while detailing 2-Year Battery Life – Reliable long-term performance; replaceable lithium cells Technical Specifications Specification Value Rated Voltage DC 12V Rated Power 120W Battery Type Lithium Ion 5000mAh Charge Time 2.5 hours (full) Runtime (Full Battery) Up to 30 minutes Battery Lifespan 1–2 years typical use Suction Power 4 KPA Noise Level ≤70 dB Usage Type Dry & Wet Dust Capacity ≥0.6L Cleaning Efficiency ≥96% Weight 550g (1.2 lbs) Vehicle Compatibility All Vehicles Using Your Vacuum Setup & Operation Charge the battery: Connect via USB cable. Full charge takes 2.5 hours. A full battery provides up to 30 minutes of continuous use. Select your nozzle: Choose the brush for upholstery, long mouth for crevices, or extension hose for under-seat access. Attachments clip firmly into place. Power on: Press the power button. Motor ramps to full 4KPA suction within seconds. Clean your interior: Start with seats and upper surfaces; finish with floor mats and footwells. The handheld design lets you maneuver into tight corners with ease. Empty the dust bin: After use, unclip the bin and tap debris into a waste bin. For wet debris, rinse and air-dry completely before recharging. Recharge: Return to USB charging between uses. Store in a cool, dry place. Filter is washable—rinse under water and let air-dry monthly. Tip: For spilled liquids, power down the unit immediately after wet use, empty the bin, and allow all components to air-dry for at least 4 hours before charging to prevent battery or motor damage. Keep Your Cabin Spotless Premium 4x4 ownership demands premium interior care. The Victorious Wireless Handheld Vacuum gives you the power and portability to maintain showroom condition anytime, anywhere—muddy countryside, dusty campsite, or your driveway at home. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ verified reviews 🚚 · Worldwide shipping via DHL, FedEx, UPS, TNT 💰 · 30-day money-back guarantee 📞 · +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Defender, Jaguar Land Rover (JLR), or any OEM manufacturer. Product compatibility is assessed independently. Always verify fitment before purchase. Modifications may void vehicle warranty; consult your retailer or manufacturer before installation. ```

Victorious Automotive · Defender L663 · Exterior Carbon Fibre Premium Carbon Fibre Rear Side Splitter — Land Rover Defender 110 L663 (2020+) Real carbon fibre precision-formed to the Defender 110's rear quarter — delivering motorsport-grade detailing with a factory-clean finish on every fitment. Defender L663 2020–2026+ 100% Carbon Fibre Rear Side Splitter High-Gloss Finish Direct Fitment UV Protected Left + Right Set Overview The Land Rover Defender 110 L663 is a vehicle that commands attention — a modern icon built on a legacy of capability, reimagined for those who want presence as well as performance. The rear quarter is one of its most defining angles, and it's precisely where detail-oriented owners choose to make a statement. Every line, every surface, every edge is an opportunity — and this splitter addresses it directly. The Victorious Premium Carbon Fibre Rear Side Splitter is constructed from authentic, woven carbon fibre — not a lookalike, not a wrap, and not an ABS facsimile. The visible weave is sealed beneath a high-gloss UV-resistant clear coat that protects the finish from the elements without compromising the depth and character of real carbon. It's the material choice of motorsport, applied to the road car you drive every day. Engineered specifically to the L663 body profile, this rear side splitter integrates cleanly into the vehicle's lower rear quarter without the need for cutting, grinding, or modification. Whether you're building out a full carbon kit or simply refining a single detail, this piece holds its own — and pairs flawlessly with rear diffusers, side skirts, and bonnet trims from the Victorious range. What's Included 🖤 Carbon Fibre Rear Side Splitters Left + Right — matched pair, one set per order 🔩 Fitting Hardware Bolts, fixings, or adhesive tape as applicable 📋 Installation Guide Step-by-step fitment reference included 🛡️ Protective Packaging Carbon surfaces protected for transit, worldwide shipping Product Highlights Authentic 100% real carbon fibre — not ABS, not wrapped, not simulated High-gloss UV-resistant clear coat prevents fading and surface degradation Precision-formed to L663 OEM body contours for seamless panel alignment Lightweight construction — adds visual weight without physical weight penalty Direct bolt-on or bond-on fitment — no cutting or permanent modification required Supplied as a matched left and right pair for balanced, symmetrical styling Compatible with all L663 110 trim levels including V8 and X-Dynamic Pairs cleanly with rear diffusers, skirts, and full Victorious carbon kits Impact-resistant weave construction — resilient against road debris and daily use Motorsport-inspired aesthetics without compromising the Defender's character Compatibility Vehicle Code Year Range Trim Fitment Land Rover Defender 110 L663 2020–2026+ S Direct Fit Land Rover Defender 110 L663 2020–2026+ SE Direct Fit Land Rover Defender 110 L663 2020–2026+ X-Dynamic SE Direct Fit Land Rover Defender 110 L663 2020–2026+ X Direct Fit Land Rover Defender 110 L663 2020–2026+ V8 / V8 Carpathian Direct Fit Land Rover Defender 90 L663 2020–2026+ All Trims Direct Fit Land Rover Defender 130 L663 2022–2026+ All Trims Not Compatible Defender 110 with Factory Body Kit L663 Any OEM Aero Pack Not Compatible Installation Notes 🔧 Difficulty: Intermediate  ·  ⏱ Estimated Time: 45–90 Minutes  ·  👤 1–2 People Recommended Thoroughly clean the rear lower quarter panel surfaces with isopropyl alcohol. Remove any wax, polish, or contaminants that may affect adhesion or alignment. Dry-fit both the left and right splitters to the vehicle without adhesive or bolts. Confirm panel alignment, gap consistency, and symmetry across both sides before committing. Mark the fitment position lightly with masking tape reference points on both sides to maintain consistency during final installation. Apply supplied adhesive tape or bolts in sequence, working from the centre outward to avoid misalignment or panel stress. Do not force fitment — the piece should seat naturally against the body line. Apply firm, even pressure across the full surface for a minimum of 60 seconds. For bond-on fitment, allow adhesive to cure for at least 24 hours before washing or driving at speed. Remove masking references, inspect panel gaps and surface alignment, and clean the carbon surface with a soft microfibre cloth. ⚠ Professional Installation Recommended: While this product is designed for direct fitment without modification, professional installation is strongly advised to ensure precise alignment, long-term bond integrity, and to avoid any potential damage to the vehicle's painted surfaces. Victorious Automotive accepts no liability for installation-related damage. Rear-End Precision. Carbon Fibre Authority. Every angle of your Defender tells a story. Make the rear quarter count — with genuine carbon fibre crafted to the same standard your vehicle was built to. Browse the full Defender L663 exterior range at Victorious Automotive and build the specification your Defender deserves. Shop Defender L663 Exterior → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended.

Victorious Automotive · Defender L663 · Exterior Styling Premium Gloss Black Front Lip Splitter – Land Rover Defender 110 L663 (2020+) A precision-moulded, gloss black front lip splitter engineered to sharpen the Defender 110's stance and amplify its road presence — with zero cutting and zero compromise. Defender L663 2020–2026 Gloss Black ABS Construction OEM Fitment No Cutting Required UV Resistant Bolt-On / Bond-On Overview The Land Rover Defender 110 L663 is one of the most visually commanding vehicles on the road — purposeful, upright, and unmistakably bold. But for owners who want to push that presence further, the factory front bumper leaves room to sharpen the lower profile and bring a more performance-orientated edge to the vehicle's front end. This is exactly what the Victorious Premium Gloss Black Front Lip Splitter is built for. Engineered specifically for the Defender 110 L663 platform, this front lip is precision-moulded in high-grade ABS to follow the exact contour lines of the OEM front bumper. The result is a factory-finished look that appears as though it left the production line that way — seamlessly integrated, visually cohesive, and impeccably fitted. The deep gloss black finish adds a refined, aggressive character that works particularly well alongside dark trim packs, blacked-out wheels, and tinted details. Whether your Defender is a daily driver, a weekend escape vehicle, or a show-standard build, this front lip delivers the kind of understated enhancement that separates a well-considered build from a standard example. It's the detail that owners notice — and the detail that others can't quite put their finger on, but know makes the vehicle look significantly sharper. What's Included 🖤 Front Lip Splitter 1 x Premium Gloss Black ABS front lip — full-width, precision-moulded 🔩 Fitting Hardware Mounting fixings or adhesive tape depending on configuration selected 📋 Installation Guide Step-by-step fitment instructions included in the box Product Highlights Deep gloss black finish that is both UV-resistant and scratch-resistant for long-term kerb appeal Precision-moulded ABS construction that mirrors the exact profile of the OEM Defender 110 front bumper Lightweight yet rigid material — strong enough for all-weather driving without adding unnecessary mass OEM-style fitment requiring no cutting, drilling, or permanent modifications to the factory bumper Complements factory black packs, aftermarket wheel upgrades, and dark exterior trim seamlessly Weather-resistant surface treatment engineered to withstand rain, road grime, and temperature variation Ultra-reflective gloss surface that adds visual depth and dimension to the lower front end Compatible with bolt-on or bond-on installation methods to suit different owner preferences Consistent panel gap alignment with factory bumper lines for a professional, show-ready appearance Designed and quality-checked specifically for the L663 platform — not a generic universal fitment Compatibility Vehicle Model Code Year Range Trim Level Fitment Land Rover Defender 110 L663 2020–2026 S Direct Fit Land Rover Defender 110 L663 2020–2026 SE Direct Fit Land Rover Defender 110 L663 2020–2026 X-Dynamic SE Direct Fit Land Rover Defender 110 L663 2020–2026 X Direct Fit Land Rover Defender 110 L663 2020–2026 V8 / V8 Carpathian Direct Fit Land Rover Defender 110 L663 2020–2026 Adventure Pack fitted Direct Fit Land Rover Defender 90 L663 2020–2026 All Trims Direct Fit Land Rover Defender 130 L663 2022–2026 All Trims Direct Fit Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 30–60 Minutes  ·  Tools: Basic Hand Tools or Adhesive Prep Kit Park the vehicle on a flat, level surface and ensure the front bumper is clean, dry, and free from wax or polish residue before beginning. Dry-fit the front lip against the bumper to confirm alignment and panel gap consistency before committing to any fixings or adhesive. For bolt-on configurations: locate the pre-existing bumper mounting points, align the lip bracket holes, and secure using the provided hardware — do not overtighten. For bond-on configurations: apply the provided adhesive tape or bonding compound to the inner lip flange, press firmly into position along the bumper's lower edge, and hold in place for the recommended cure time. Check all edges for consistent gap alignment and panel flush before the adhesive fully sets or hardware is fully torqued. Allow any adhesive to fully cure before driving — typically 24 hours at room temperature for optimal bond strength. Please Note: Professional installation is strongly recommended to ensure the best possible fitment and finish. This product is not compatible with vehicles fitted with the factory Adventure Pack or Urban Pack front lip kits. Always verify your vehicle's existing front bumper configuration before ordering. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Sharpen Your Stance. Define Your Presence. The Victorious Premium Gloss Black Front Lip Splitter is one of the cleanest, most effective exterior upgrades available for the Defender 110 L663. Precise fitment, premium finish, and a look that turns every road into a statement. Explore the full Defender 110 collection and build the Defender you've always had in mind. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification before purchasing.

Victorious Automotive · Defender L663 · Exterior Styling Gloss Black Rear Side Splitter for Land Rover Defender 110 L663 (2020+) A precision-engineered gloss black rear side splitter that sharpens the lower rear stance of your Defender 110 — adding visual weight, depth, and a street-ready edge that pairs flawlessly with any black pack build. Defender L663 2020–2026 ABS Construction Gloss Black Rear Styling OEM Fit Left + Right Set UV Resistant Overview The Defender 110 L663 is one of the most architecturally distinctive vehicles on the road today — its flat-panel bodywork and boxy proportions reward well-chosen exterior additions in a way few SUVs can. Every external upgrade either complements that geometry or fights it. The Victorious Rear Side Splitter is firmly in the former camp. Designed to follow the factory body lines of the Defender 110's lower rear quarters, these splitters visually extend the profile outward and downward, creating the impression of a wider, planted stance. The high-gloss black finish — deep, reflective, and durable — reads as an intentional OEM-style treatment rather than an afterthought. Moulded from impact-grade ABS with UV-stabilised coating, the surface retains its depth and shine through British winters and summer road trips alike. Whether you're running a full black pack, combining with a gloss rear diffuser, or simply finishing off a set of gloss wheel arch trims, the rear side splitter is the piece that ties the lower rear of the vehicle together. It's a small addition with a disproportionate visual return — exactly the kind of upgrade Defender owners tend to appreciate most. What's Included 🖤 Left Rear Side Splitter Gloss black ABS, driver's side 🖤 Right Rear Side Splitter Gloss black ABS, passenger side 🔩 Mounting Hardware Fixings and/or adhesive as required 📋 Installation Guide Step-by-step fitting reference Product Highlights High-gloss black ABS finish — deep reflective shine from every angle UV and weather-resistant coating — colour-stable in sun, rain, and salt exposure Precision-moulded to OEM body line tolerances — no visible gaps or misalignment Lightweight ABS construction — no structural load on body panels Visually widens and lowers the rear stance without modification Pairs seamlessly with gloss diffusers, lip kits, and wheel arch trims Supplied as a matched left and right set for uniform finish Bond-on or bolt-on fitment — no specialist tools required Compatible with all Defender 110 trim levels from S through to V8 Backed by Victorious's 30-day money-back guarantee Compatibility Vehicle Code Years Trim Fit Land Rover Defender 110 L663 2020–2026+ S Direct Fit Land Rover Defender 110 L663 2020–2026+ SE Direct Fit Land Rover Defender 110 L663 2020–2026+ X-Dynamic Direct Fit Land Rover Defender 110 L663 2020–2026+ X Direct Fit Land Rover Defender 110 L663 2020–2026+ V8 Direct Fit Land Rover Defender 90 L663 2020–2026+ All Not Compatible Defender 110 with Factory Body Kit L663 Any Built-in splitters Not Compatible Defender 130 L663 2022–2026+ All Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools: Basic hand tools or clean cloth Thoroughly clean the lower rear quarter panel surface where the splitter will be fitted — remove all wax, grease, and dirt using an isopropyl alcohol wipe for maximum bond adhesion. Dry-fit both splitters against the body panels and confirm alignment against factory body lines before committing to final fitment. If using supplied adhesive, apply evenly to the rear face of the splitter and press firmly into position, holding for 30–60 seconds. For bolt-on fittings, align mounting points and fasten to specified torque. Work from the centre outwards to avoid air pockets or uneven seating along the edge profile. Allow adhesive to cure fully (minimum 24 hours) before washing the vehicle or exposing to high-pressure water. ⚠ Note: Professional installation is recommended for best long-term results and optimal body-line alignment. Fitting to vehicles with factory-installed body kits or non-standard rear trim panels may require modification and is not covered under the standard fitment guarantee. Bold. Glossy. Unmistakably Defender. The Victorious Rear Side Splitter is the finishing detail your Defender 110's lower rear has been waiting for. Complete your gloss black build with a piece that looks factory-spec and performs like it was always meant to be there. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Exterior Styling Premium Gloss Black Wheel Flares & Arch Extensions – Land Rover Defender 110 L663 (2020+) Wide-body stance and bold kerb presence engineered specifically for the L663 Defender 110 — in a deep, UV-protected gloss black finish that commands attention from every angle. Defender L663 2020–2025+ Gloss Black ABS Plastic Set of 4 OEM-Style Fit No Drilling Required All Trim Levels Overview The Land Rover Defender 110 L663 is a vehicle that demands accessories worthy of its character — purposeful, robust, and unapologetically bold. Whether you're running the Defender in its standard form or have already begun tailoring it to your taste, the wheel arches are one of the most visually dominant features on the body. They're what give the Defender its planted, wide-track posture — and that's precisely why upgrading them makes such a dramatic difference. These Victorious Premium Gloss Black Wheel Arch Flares are precision-moulded to follow the exact contours of the L663 bodywork, integrating cleanly with the factory panel lines for a look that feels considered rather than bolted-on. Manufactured from heavy-duty ABS plastic and finished in a deep, showroom-quality gloss black, they add instant visual width and definition without compromising the Defender's distinctive silhouette. Beyond aesthetics, these arch flares serve a practical purpose. They extend outward coverage over your tyres, shielding the paintwork, sills, and lower body from stone chips, road debris, and mud thrown up under hard driving conditions — on road or off. A straightforward bond-on installation means there's no need to drill into the body, and the result is an upgrade that looks factory-specified and performs accordingly. What's Included 🖤 Front Wheel Arch Flares × 2 Left & right, precision-moulded for L663 front arches 🖤 Rear Wheel Arch Flares × 2 Left & right, matched profile for seamless rear fitment 🔧 Mounting Hardware Clips or automotive-grade adhesive tape included (design-dependent) 📋 Fitting Instructions Step-by-step guide for clean, confident installation Product Highlights Deep gloss black finish with UV-resistant coating to prevent fading and dulling over time Heavy-duty ABS plastic construction — lightweight yet highly resistant to impact and weathering Precision-moulded to the exact contours of the L663 Defender 110 body panels Wide-body aesthetic adds visual stance and presence without structural modification No drilling required — bond-on fitment preserves factory bodywork integrity Provides practical protection against stone chips, mud splash, and road debris OEM-style integration that looks at home on any factory or lightly modified Defender Compatible with all L663 Defender 110 trim levels including V8 and X-Dynamic Gloss finish complements dark factory trim, black pack options, and aftermarket detailing Full set of four arches included — front and rear, both sides, ready to fit Compatibility Model Code Year Range Trim Level Fitment Defender 110 L663 2020–2025+ S Direct Fit Defender 110 L663 2020–2025+ SE Direct Fit Defender 110 L663 2020–2025+ X-Dynamic SE Direct Fit Defender 110 L663 2020–2025+ X Direct Fit Defender 110 L663 2020–2025+ V8 / V8 Carpathian Direct Fit Defender 90 L663 2020–2025+ All Trims Not Compatible Defender 130 L663 2022–2025+ All Trims Not Compatible Defender 110 (Factory Extended Arches) L663 2020–2025+ Pre-fitted Extended Arches Not Compatible Installation Notes 🔧 Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–90 Minutes  ·  No Drilling Required Thoroughly clean and degrease the surface of each wheel arch using an isopropyl alcohol wipe or panel wipe solution. Remove all wax, polish, and road film residue. Dry all surfaces completely. Allow to reach ambient temperature — avoid fitting in direct sunlight or temperatures below 10°C for best adhesive performance. Dry-fit each arch flare into position before committing, confirming alignment with panel lines and wheel arch edges on all four corners. Apply the included mounting hardware — either automotive-grade adhesive tape or clips — as directed in the included fitting guide. Press firmly and hold for 30–60 seconds on each section. Allow full cure time before driving. For adhesive-backed fitments, 24 hours at room temperature is recommended before exposing the vehicle to water or harsh conditions. ⚠ Important: Professional installation is recommended for optimal panel alignment and to ensure long-term adhesion. Fitting to wet, cold, or contaminated surfaces may compromise bond strength. These flares are designed for the standard L663 Defender 110 arch profile — do not attempt fitment on vehicles already equipped with factory extended or aftermarket arches. Go Wider. Go Bolder. Go Victorious. The Defender 110 deserves accessories built to match its ambition. These gloss black wheel arch flares deliver the stance, the finish, and the protection your L663 deserves — designed and curated by specialists who drive these vehicles too. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔁 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Discovery 4 / Range Rover Sport L320 · Interior Trim Volume & Air Conditioning Knobs for 2010–2016 Land Rover Range Rover Sport, Discovery 4 / LR4 & Freelander 2 Restore or upgrade five of the most frequently touched controls in your cabin with precision-formed ABS knobs designed to fit your Land Rover exactly — available in Silver and Matte Black. Discovery 4 / LR4 Range Rover Sport L320 Freelander 2 2010–2016 ABS Plastic Silver & Matte Black 5-Piece Set No Drilling ISO9001 Manufactured Overview The Discovery 4, Range Rover Sport (L320) and Freelander 2 share a generation of Land Rover interior that remains hugely popular with owners who appreciate the combination of practicality and premium cabin presence. Over time, however, the original volume and climate control knobs are among the first components to show wear — fading, scuffing, or simply looking tired compared to the rest of the interior. These replacement knobs are purpose-built to the dimensions and profile of the original controls across all three platforms. Manufactured from high-quality ABS plastic to ISO9001 standards, they replicate the factory look and feel while giving you the option to introduce a subtle Silver or Matte Black finish — both of which pair exceptionally well with the standard Land Rover interior palette. The set of five covers all key rotary controls in the HVAC and audio cluster, meaning a single purchase restores the entire section uniformly. Installation is straightforward using the included double-sided adhesive — no tools, no drilling, and no modification to your original switchgear required. What's Included 🎛️ Volume Control Knob Replacement for the primary audio rotary dial ❄️ Air Con Knobs × 2 Left and right climate temperature/fan dials 🌀 Fan Speed Knob Blower/airflow rotary control replacement 📦 Double-Sided Adhesive Pre-cut strips included for clean fitment Total pieces in set: 5 decorative knob covers Product Highlights Precision-formed ABS plastic for a consistent, factory-like finish Available in Silver and Matte Black to suit your interior trim 5-piece set covers all primary HVAC and audio rotary controls Double-sided adhesive installation — no tools or drilling required Manufactured to ISO9001 quality management standards Direct-fit design for 2010–2016 Land Rover model range Resistant to everyday wear, UV exposure and cabin temperature cycles Uniform finish across all five knobs for a cohesive cabin look Low-profile cover design preserves the original knob function entirely Lightweight construction with no impact on rotary control feel Compatibility Vehicle Code Years Fitment Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Land Rover Freelander 2 L359 2010–2016 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 2011–2018 Not Compatible Unsure if this fits your exact build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm. Installation Notes 🔧 Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the existing knob surfaces are clean and free of grease or dust. Use an isopropyl alcohol wipe if available — this ensures the adhesive bonds firmly. Lay out all five knob covers and confirm the correct orientation for each position before applying adhesive. Peel the backing from the pre-cut double-sided adhesive strips and apply one strip to the back of each knob cover. Carefully centre each cover over the corresponding control knob, pressing firmly and holding for 10–15 seconds to allow the adhesive to bond. Allow 30–60 minutes before operating the controls to allow the adhesive to fully set. Avoid using the climate controls or audio volume immediately after fitting. ⚠ Note: These are decorative overlay covers and do not replace the underlying knob mechanism. If your existing knobs are cracked or physically damaged, we recommend replacing the original knob units first before applying these covers. Do not apply to wet or recently cleaned surfaces — allow to dry fully before installation. Upgrade Your Discovery 4 Interior Today Small details make a significant difference in a cabin you spend time in every day. Restore the look of your Land Rover's controls with a set that fits precisely, installs in minutes, and holds up to daily use. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious · Toyota Land Cruiser LC300 · Exterior Styling Waistline Pattern Decorative Color Stripes Sticker – LC300 Elevate your Land Cruiser's presence with dynamic body-line striping that adds instant visual depth and modern athletic character. LC300 2022–2024 Premium Vinyl Waistline Pattern Color Striping Body Graphic Overview The Toyota Land Cruiser LC300 commands respect on every terrain. From expedition overlanding to daily commutes, this generation establishes itself as a modern icon—and your sticker choice should match that pedigree. Our Waistline Pattern Decorative Color Stripes Sticker transforms the vehicle's profile with strategically positioned accent lines that follow the natural geometry of the body, creating the illusion of motion while standing still. This premium vinyl graphic is engineered for precision fitment to the LC300's 2022–2024 bodywork. The color stripe design bridges the gap between understated elegance and bold statement-making. Rather than covering large surfaces, the waistline pattern enhances the truck's proportions, emphasizing length and muscularity—exactly what discerning Land Cruiser owners want. Installation is straightforward using the wet-application method (water and detergent). The adhesive bonds progressively over several days, so we recommend avoiding vehicle washing for a full week post-installation. Once cured, the vinyl resists UV fade, weathering, and daily abuse, maintaining its colour saturation for years. What's Included 📋 1× Waistline Stripe Sticker Pre-cut for LC300 2022–2024 🧊 Installation Guide Step-by-step application instructions 🛡️ 30-Day Money-Back Guarantee Victorious Automotive protection Product Highlights Precise fitment engineered for LC300 body contours (2022–2024) Premium cast vinyl resists UV, moisture, and temperature extremes Enhances waistline geometry without overwhelming the design Wet-application installation—no heat gun required Creates depth and athletic presence instantly Maintains colour saturation for 5+ years outdoors Professional finish—looks factory-intended Complements both stock and modified LC300 builds Removable without adhesive residue (when applied correctly) Part of Victorious LC300 exterior styling range Compatibility Model Year Range Fitment Toyota Land Cruiser LC300 2022–2024 Direct Fit Toyota Land Cruiser LC300 2021 & Earlier Not Compatible Toyota Land Cruiser LC250 2024+ Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Prepare the surface: Wash the application area with soapy water and dry completely. Wipe with isopropyl alcohol to remove wax and oils. Position the sticker: Measure and mark the waistline placement using masking tape as a guide. Hold the sticker against the body to confirm positioning before application. Apply with slip solution: Spray the back of the sticker and the vehicle surface generously with a 50/50 water-and-detergent solution. Smooth and squeegee: Carefully position the wet sticker. Use a squeegee or plastic card to push out air bubbles, working from the centre outward. Final trim: Use a sharp craft knife to trim any excess vinyl at panel edges. Be careful not to cut the paint. Cure time: Allow 24–48 hours for the adhesive to set before exposing the vehicle to rain or pressure washing. Critical: Do not wash your Land Cruiser for at least 7 days after installation. The adhesive requires this time to fully cure. Premature washing may cause edge lifting or peeling. Why Choose Victorious We specialise in premium exterior styling for Land Cruiser, Land Rover, Range Rover, and Defender vehicles. Every product we stock is tested for fitment, durability, and aesthetic impact. Our 30-day money-back guarantee and 4.9/5 star rating (12,300+ verified reviews) reflect our commitment to your satisfaction. Ready to Transform Your LC300? Add visual punch to your Land Cruiser with our Waistline Pattern Decorative Stripes. Worldwide shipping via DHL, FedEx, UPS, and TNT. Order today and save 20% on any two items with code 22GET20. Shop LC300 Exterior Collection ✓ 30-Day Money-Back Guarantee ✓ 12,300+ Verified Reviews ✓ Worldwide Shipping ✓ Expert Support Questions? Call us at +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent accessory specialist and is not affiliated with Toyota, Land Rover, Jaguar Land Rover, or their parent companies. All vehicle names and model designations are registered trademarks of their respective manufacturers. Product compatibility confirmed for 2022–2024 Toyota Land Cruiser LC300 only.

```html Tesla · Model 3 · Interior Privacy Webcam Cover for Tesla Model 3 2017–2019 Discreet sliding cover that protects your privacy without compromising interior aesthetics. Model 3 2017–2019 Interior Privacy Protection Slide Mechanism Overview Your Tesla Model 3 cabin camera is a clever safety feature—but that doesn't mean you need to live with constant surveillance in your personal space. This purpose-built webcam cover gives you complete control over when the camera operates, without removing or damaging the device. Engineered for the 2017–2019 Model 3, this cover slides silently into place with zero fuss. The slim profile means it sits flush against the interior trim, preserving the clean lines of your dashboard. Made from premium, durable material that resists wear and fingerprints, it's designed to become invisible once installed. Whether you're protecting your privacy during stationary moments or simply want peace of mind that your personal conversations stay private, this cover delivers effortless reassurance every time you get behind the wheel. What's Included 📦 1 × Webcam Cover Premium black finish, precision-fitted 📋 Installation Guide Step-by-step instructions with diagrams Product Highlights Smooth slide mechanism for one-handed operation Fits 2017–2019 Model 3 interior camera perfectly Ultra-thin design (0.03") blends seamlessly with trim Premium black finish matches factory aesthetic Durable material resists scratching and discolouration No permanent adhesive—fully reversible installation Clean surface preparation required for optimal grip Lightweight and balanced for silent operation Dimensions: 1.2 × 0.5 inches (precision engineered) Backed by 30-day money-back guarantee Compatibility Model Year Model Code Compatibility 2017–2019 Model 3 Base / Standard Range Direct Fit 2017–2019 Model 3 Performance Direct Fit 2020+ Model 3 All variants Not Compatible Installation Notes Difficulty: Beginner | Time: 2–3 minutes Clean the camera lens and surrounding area with a dry, lint-free cloth. Ensure the surface is completely dry before proceeding. Position the cover directly over the camera lens. Slide gently into place until you hear a soft click. Verify smooth operation by sliding back and forth once. Important: Do not force the cover. If resistance is felt, check alignment and reposition. Always use a clean, dry surface for best adhesion and longevity. Ready to Reclaim Your Privacy? Protect your personal space with a product engineered specifically for Tesla Model 3 owners. Simple to install, invisible when deployed, and backed by our 30-day guarantee. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping ✓ Expert Support Disclaimer: This product is not affiliated with, endorsed by, or produced in partnership with Tesla, Inc. Tesla is a registered trademark of Tesla, Inc. This cover is an aftermarket accessory designed for compatibility with Tesla vehicles. ```

Victorious Automotive · Defender L663 · Exterior Styling Gloss Black Wheel Arches / Fender Flares — Land Rover Defender 90 L663 (2020–2026) Purpose-built fender flares in a high-gloss black finish that sharpen the Defender 90's silhouette while adding meaningful protection against road debris and off-road wear. Defender 90 L663 2020–2026 Gloss Black High-Grade ABS Integrated LED Left & Right Direct Fit Full Set Overview The Defender 90 L663 is an icon reborn — a vehicle that balances genuine off-road capability with a modern, design-forward aesthetic. Its wide stance and upright body lines demand exterior upgrades that complement rather than compromise that identity. These gloss black wheel arches are engineered with exactly that philosophy in mind. Manufactured from high-grade ABS plastic and finished in a rich gloss black, these fender flares add a purposeful, muscular edge to the Defender 90's wheel arches. The integrated LED strips add an additional layer of presence — both on road and on the trail — while seamlessly blending into the overall profile of the vehicle. The fitment is direct and symmetrical, covering both the left and right sides for a factory-cohesive result. Whether you're running wider aftermarket wheels, seeking enhanced body protection, or simply refining the look of your L663, these wheel arches deliver on all fronts. Built for owners who expect their upgrades to look intentional — not afterthought. What's Included 🛡️ Front Left Wheel Arch Gloss black ABS, direct fit 🛡️ Front Right Wheel Arch Mirror-matched pair 🛡️ Rear Left Wheel Arch Integrated LED strip included 🛡️ Rear Right Wheel Arch Seamless aesthetic match 🔩 Fitting Hardware All mounting fixings included 📄 Installation Guide Step-by-step fitment reference Product Highlights Precision-engineered for the Defender 90 L663 2020 onwards High-grade ABS construction for durability in all conditions Gloss black finish for a bold, premium appearance Integrated LED lighting strips for enhanced visibility Covers both left and right sides — complete set Designed to accommodate wider wheel fitments Protects bodywork from stone chips and road debris No permanent modifications required for installation Available in NSA Spec (US) and EU/UK Spec variants Brand new, ready to install straight from the box Compatibility Vehicle Code Years Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Defender 90 (Pre-2020) L316 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Intermediate  |  ⏱ Estimated Time: 2–3 Hours  |  👥 Recommended: 2 People Park the vehicle on a flat, stable surface and ensure the engine is off. Gather all tools — trim removal tools, a torx set, and a clean microfibre cloth are recommended. Carefully remove the existing OEM wheel arch trim panels using a trim removal tool, working around the arch perimeter to avoid damaging clips or paintwork. Clean the exposed bodywork thoroughly to remove any road residue or adhesive from the original trims. Allow the surface to dry completely before proceeding. Align the new fender flare to the wheel arch opening. Confirm the positioning is correct before committing to any fixings — front and rear arches are different profiles. Secure the wheel arch using the provided hardware, ensuring all mounting points are engaged evenly. Do not overtighten fasteners to avoid stress cracking the ABS. If your arches include integrated LED strips, route the wiring through the inner arch liner and connect to the appropriate vehicle harness. Consult a qualified auto electrician if you are unsure. Repeat for all four arches. Once complete, step back and verify alignment and panel gaps are consistent on both sides of the vehicle. ⚠ Important: Ensure you select the correct regional specification before purchasing. If you are in the US region, select NSA Spec. If you are based in EU or UK, select EU/UK Spec. Installing an incorrect specification may result in fitment issues around indicator and lighting placement. Professional installation is recommended if you are unfamiliar with trim removal on the L663 platform. Complete Your Defender 90's Exterior Explore the full range of Defender L663 exterior upgrades at Victorious Automotive — from bonnet accessories and side vents to grille surrounds and door handle covers. Every piece is selected for fitment quality and aesthetic integrity. Shop Defender L663 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Lighting & DRL White DRL Board for 2020–2022 Land Rover Defender — Daytime Running Light Module CML-G5M3 5120-1 UBL3036 A precision-matched replacement DRL board engineered specifically for the L663 Defender headlight assembly — restoring crisp white daytime running light output with zero compromise on factory aesthetics. Defender L663 2020–2022 Direct Fit White LED CML-G5M3 UBL3036 OEM-Style Headlight Component Exterior Lighting Overview The Land Rover Defender L663 reintroduced an icon with a thoroughly modern character — and its distinctive full-width LED lighting signature plays a central role in that identity. Whether it's the 90, 110, or 130 body style, the Defender's daytime running light strip is one of the most recognisable elements of its face. When a single DRL board fails, the visual and functional impact is immediate: an uneven illumination pattern, a warning on the instrument cluster, and a vehicle that simply doesn't look right. This White DRL Board is a purpose-built replacement module for the 2020, 2021, and 2022 Land Rover Defender headlight assembly. Carrying the OEM-reference part number CML-G5M3 5120-1 UBL3036, it is designed to slot directly into the existing headlight unit without modification. The LED array delivers the same clean white output as the original fitment, ensuring the left and right lamps match in colour temperature and brightness the moment power is restored. At Victorious Automotive, we source lighting components that meet the standards Defender owners expect. This DRL board is built for longevity, with a robust circuit design that handles the thermal cycling inherent to daily-driven vehicles. If you're carrying out a headlight refurbishment or replacing a failed unit, this module provides the most straightforward path back to full factory-spec lighting performance. What's Included 💡 DRL Board Module × 1 White LED — CML-G5M3 5120-1 UBL3036 📦 Protective Packaging Securely packaged for safe international transit Product Highlights Direct-fit replacement for L663 Defender headlight DRL assemblies (2020–2022) OEM part reference CML-G5M3 5120-1 UBL3036 for confirmed compatibility White LED output matched to factory colour temperature for seamless pairing Precision PCB layout mirrors the original board dimensions and connector position High-quality LED diodes rated for extended operational lifespan Designed to eliminate instrument cluster DRL fault warnings on repair Thermal-resistant construction suitable for enclosed headlight environments No cutting, splicing, or modification required during installation Compatible with both left-hand drive and right-hand drive Defender variants Ideal for headlight refurbishment, repair, or faulty module replacement Compatibility Vehicle Code Year Range Body Style Fit Land Rover Defender L663 2020–2022 90 / 110 / 130 Direct Fit Land Rover Defender L663 2023–2026 90 / 110 / 130 Verify Before Purchase Range Rover Vogue L460 / L405 All Years All Not Compatible Range Rover Sport L461 / L494 All Years All Not Compatible Range Rover Velar L560 All Years All Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes Disconnect the vehicle battery and allow the headlight assembly to fully discharge before beginning work. Remove the Defender headlight unit from the vehicle by releasing the mounting hardware and disconnecting the wiring loom connectors. Open the headlight assembly carefully — use a heat gun on a low setting around the lens seal if the unit has not been previously opened. Locate the existing DRL board within the assembly and disconnect the board connector. Remove the faulty or damaged DRL board, taking note of the mounting orientation. Fit the new CML-G5M3 DRL board in the same orientation, securing it to the mounting points and reconnecting the board connector fully until it clicks. Reseal the headlight assembly, refit to the vehicle, and reconnect the wiring loom and battery. Power on the vehicle and verify full DRL function across the lamp. Clear any residual fault codes using a compatible diagnostic tool if required. ⚠ Important: Professional installation by a qualified auto-electrician or Defender specialist is recommended. Improper assembly of the headlight unit may compromise its weather sealing. Always confirm part number compatibility with your specific headlight assembly reference before fitting. The Right Part. The Right Fit. From Specialists Who Know Defenders. At Victorious Automotive, every component in our range is selected with one standard in mind — good enough for the vehicles we drive ourselves. Browse our full Defender L663 lighting and exterior collection, or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you need guidance before ordering. Shop Defender L663 Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All brand names, model designations, and part references are used solely for the purpose of fitment identification. The CML-G5M3 5120-1 UBL3036 part number is referenced for compatibility purposes only. Always verify fitment against your vehicle's headlight assembly reference prior to purchase.

Victorious Automotive · Toyota Land Cruiser · Exterior Wind Deflectors for Toyota Land Cruiser 300 LC300 2024 Refined air management meets premium aesthetics—factory-finish deflectors that enhance comfort and style without compromise. LC300 2021–2024 Acrylic Electroplated Easy Install Overview The Land Cruiser 300 Series demands purposeful design. These wind deflectors are engineered specifically for the LC300 platform, delivering functional ventilation control while maintaining the vehicle's commanding aesthetic. Whether you're highway cruising with windows down or managing crosswind pressure, these deflectors keep the cabin comfortable and the lines clean. Crafted from premium acrylic with electroplated finishing, they integrate seamlessly with your LC300's body lines. The secure buckle-glue installation method ensures durability without requiring drilling or permanent modifications—a true bolt-on refinement for serious Land Cruiser owners. Designed for both function and form, these deflectors reduce wind noise, allow controlled ventilation, and add a subtle professional touch to your 300 Series. They're the kind of detail that transforms your relationship with open-air driving. What's Included 🪟 Wind Deflector Set Complete front & rear deflectors for LC300 🔧 Installation Hardware Buckle glue & mounting accessories 📖 Installation Guide Step-by-step instructions with diagrams ✓ Fitment Verified Tested on 2021–2024 LC300 models Product Highlights Custom-engineered fit for seamless LC300 integration Premium acrylic material with electroplated metallic finish Secure buckle-glue installation—no drilling required Reduces wind noise during highway driving Allows controlled ventilation in all weather Maintains original body lines and proportions UV-resistant acrylic resists fading and cracking Improves climate control efficiency Professional factory appearance Reversible installation with adhesive removal Compatibility Model Year Range Status Land Cruiser 300 (LC300) 2021–2024 Direct Fit Land Cruiser 250 (LC250) 2024+ Not Compatible Land Cruiser 200 Series 2007–2021 Not Compatible Installation Difficulty: Beginner | Time: 45–60 Minutes Prepare the surface: Clean and dry the door frame and window edges thoroughly with rubbing alcohol. Allow to cure completely (10–15 minutes). Test fit the deflectors: Position each deflector on its mounting point. Ensure alignment with door and window edges—no gaps or overlaps. Apply adhesive: Following the included guide, apply buckle glue to the mounting surface. Work in small sections to prevent premature setting. Install deflectors: Press each deflector firmly into place. Hold for 30–45 seconds to ensure full adhesion contact. Allow cure time: Do not open windows or touch deflectors for a minimum of 24 hours while adhesive fully sets. Final inspection: Check for gaps, movement, or misalignment. Make adjustments if needed before full cure. Important: Surface preparation is critical. Contaminated or wet surfaces will compromise adhesion. If installing in temperatures below 10°C, allow extended cure time (36 hours). Do not attempt installation in direct sunlight. Ready to Refine Your LC300? These wind deflectors are the finishing detail your Land Cruiser 300 deserves. Thoughtful engineering. Premium materials. Lasting performance. Shop the complete LC300 collection at Victorious Automotive. Explore LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ reviews 🌍 Worldwide shipping · DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Range Rover, or Jaguar Land Rover. All trademarks remain the property of their respective holders. This product is designed for aftermarket use and does not alter the vehicle's factory warranty unless modified further.

Victorious Automotive · Defender L663 · Exterior Accessories Wind Deflector Guard for Land Rover Defender L663 110 & 130 (2020–2026) A precision-engineered ABS wind deflector guard purpose-built for the Defender L663, reducing cabin turbulence and wind noise while keeping fresh air circulating — no drilling required. Defender L663 110 & 130 2020–2026 High-Quality ABS Direct Fit No Drilling Peel & Stick Install Window Vent Visor Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle built for those who demand capability without compromise — a reborn icon engineered for both serious off-road use and refined everyday driving. Whether you're running the 110 five-door or the long-wheelbase 130 with its expanded passenger configuration, the Defender's architecture benefits enormously from thoughtful exterior upgrades that enhance comfort without altering its purposeful character. These wind deflector guards are designed from the ground up to complement the angular, utilitarian bodywork of the L663. Manufactured from high-quality ABS (Acrylonitrile Butadiene Styrene), they integrate seamlessly into the window channel of each door, creating a low-profile aerodynamic barrier that deflects wind, rain, and road spray away from the cabin aperture. The result is noticeably reduced wind noise at motorway speeds, the ability to crack windows open during light rain without soaking the interior, and improved airflow management for a more pleasant driving environment. Unlike bulkier aftermarket visors, these deflectors keep a clean, factory-adjacent aesthetic that doesn't compromise the Defender's bold visual presence. The finish is carefully matched to suit the L663's window surround, and because the fitment is handled entirely via a peel-and-stick adhesive system, there is no requirement for drilling, cutting, or permanent modification to your vehicle. Installation is clean, reversible, and achievable in under thirty minutes on your driveway. What's Included 🪟 Front Left Deflector Driver-side window vent visor, pre-cut for L663 front door 🪟 Front Right Deflector Passenger-side window vent visor, pre-cut for L663 front door 🪟 Rear Left Deflector Rear driver-side visor, shaped for L663 rear door profile 🪟 Rear Right Deflector Rear passenger-side visor, shaped for L663 rear door profile 🔧 Adhesive Tape Strip Set Pre-applied 3M-grade double-sided tape on each deflector 📋 Installation Guide Step-by-step illustrated fitting instructions included Product Highlights Precision-cut for Land Rover Defender L663 110 and 130 body dimensions High-quality ABS construction — resistant to UV, heat, and impact Reduces wind noise and cabin turbulence at motorway speeds Allows windows to remain cracked open during light rain without water ingress Low-profile design preserves the Defender's bold, factory aesthetic No drilling, no cutting — fully non-invasive peel-and-stick installation Pre-applied 3M-grade adhesive tape for a secure, long-term bond Compatible with both standard and optional window glass configurations Improves interior ventilation, reducing reliance on air conditioning 100% brand new — supplied as a complete four-piece set for all main doors Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 130 L663 2020–2026 Long-Wheelbase SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Verify Before Purchase Defender 110 (Pre-2020) L316 Pre-2020 Classic Utility Not Compatible Range Rover Sport L461 / L494 Various 5-Door SUV Not Compatible Range Rover Vogue L460 / L405 Various 5-Door SUV Not Compatible Installation Notes ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Difficulty: Easy — No Tools Required Clean the window channel: Thoroughly clean the door frame and window surround with an isopropyl alcohol wipe. Remove all wax, polish, and dust residue. Allow to dry completely before proceeding. Dry-fit each deflector: Hold each deflector against the window channel without removing the tape backing. Confirm the profile aligns correctly with the door frame top rail before committing to placement. Peel and position: Remove the adhesive tape backing from the deflector. Starting at one end of the channel, carefully press the deflector into position, working gradually along its length to avoid bubbles or misalignment. Apply firm pressure: Once positioned, press firmly along the entire length of the deflector for 30–60 seconds to activate the adhesive bond. Pay particular attention to the ends and any curved sections. Cure time: Allow a minimum of 24 hours before operating the windows at high speed or washing the vehicle, to allow the adhesive to fully cure against the door surface. Repeat for all four doors: Follow the same process for each deflector in sequence — front left, front right, rear left, rear right — cross-referencing the fitting guide for any door-specific orientation notes. ⚠ Important: Do not attempt installation in temperatures below 5°C or in direct sunlight on a hot day, as extreme temperatures can affect adhesive performance. If your Defender has been previously fitted with aftermarket window tint or sealant near the channel area, clean thoroughly to ensure a clean bonding surface. If unsure about compatibility with your specific build variant, please contact our team before purchasing. Upgrade Your Defender L663 Today Every detail matters on a Defender. These wind deflector guards are a clean, functional upgrade that improves daily usability without compromising the vehicle's character. Browse our full range of Defender L663 exterior accessories and find everything your Land Rover deserves — all in one place. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Defender, L663, and Land Rover) are the property of their respective owners and are used solely for fitment identification and compatibility reference purposes. Please verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Range Rover Vogue L460 / Sport L461 · Exterior Styling Wind Deflector Vents for Range Rover Vogue L460 & Sport L461 (2022–2026) Precision-fit ABS wind deflector vents engineered to complement the angular exterior language of the fifth-generation Range Rover and second-generation Sport — adding aerodynamic definition and a purposeful blacked-out finish with zero permanent modification. Range Rover Vogue L460 Range Rover Sport L461 2022–2026 ABS Plastic Gloss Black No-Drill Fit Adhesive Mount Exterior Styling ISO9001 Certified Overview The Range Rover Vogue L460 and Range Rover Sport L461 represent a significant evolution in Jaguar Land Rover's design philosophy — sharper lines, a more assertive stance, and a cabin-forward silhouette that demands equally considered exterior accessories. These are vehicles built for owners who pay attention to detail, and every visual element on them should reflect that standard. These wind deflector vents are designed from the ground up for the 2022-onwards L460 and L461 platforms. Formed from high-grade ABS plastic and finished in a deep gloss black, they integrate seamlessly with the vehicle's existing body panels — enhancing the exterior with an aerodynamically-inspired accent that looks factory-considered rather than aftermarket-added. The fitment profile has been closely matched to the bodywork geometry of both the standard Vogue and the Sport variant. Installation requires no drilling, cutting, or permanent bodywork alteration. The included professional-grade double-sided adhesive tape provides a secure, weather-resistant bond that holds confidently across motorway speeds and changing climates — making these an ideal upgrade for owners who want a clean result without workshop involvement. What's Included 🌬️ Wind Deflector Vent Set Full set matched to L460/L461 body profile 🔲 Double-Sided Adhesive Tape Pre-cut, weather-resistant, high-bond grade 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-moulded ABS plastic for exact fitment to L460 and L461 body contours Deep gloss black finish complements both standard and Black Pack exterior trims No-drill, no-cut installation — zero permanent modification to bodywork High-bond double-sided adhesive rated for outdoor and high-speed use Weather-resistant construction — UV stable, corrosion-free, rain-proof Manufactured in an ISO9001 certified production facility Lightweight design adds visual impact without affecting handling balance Aerodynamic vent profile adds a purposeful, sporty exterior accent Compatible with both the Vogue L460 and Sport L461 from 2022 onwards Reversible fitment — can be removed without leaving visible damage Compatibility Model Code Years Fitment Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  Tools Required: None Before beginning, wash and degrease the intended mounting area on the vehicle body thoroughly. Allow the surface to dry completely — any moisture or residue will compromise adhesive bond strength. Dry-fit the deflector vents against the body panels to confirm positioning and alignment. Compare carefully against the product images to ensure correct orientation for your specific model variant. Mark the intended placement lightly if needed. Peel back a small section of the adhesive backing and position one end of the deflector carefully against the body panel. Once aligned, press firmly along the full length of the deflector for a minimum of 30 seconds, applying even pressure across the entire adhesive surface. Allow the adhesive to cure for at least 24 hours before exposing the vehicle to rain, a car wash, or motorway speeds. This ensures maximum bond strength is achieved before any stress is applied. ⚠ Important: Always cross-reference the product images with your specific vehicle before committing to installation. While this product is designed for both the L460 and L461, visual confirmation prior to fitment is strongly recommended. If you are unsure of compatibility, contact our team at +44 203 943 9919 before installing. Complete Your L460 or L461 Build These deflector vents are just the beginning. Explore our full range of exterior styling accessories designed specifically for the Range Rover Vogue L460 and Range Rover Sport L461 — curated by enthusiasts, for owners who demand precision. Shop Range Rover Vogue L460 → Shop Range Rover Sport L461 → Buying two or more items? Use code below for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Toyota · Land Cruiser 250 · Interior Accessories Window Control Panel Cover — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) A precision-moulded silicone cover that shields your LC250's door switch panel from daily wear — no adhesives, no fuss, and removable for cleaning in seconds. LC250 Prado 2024–2025 High-Grade Silicone Left Hand Drive No Adhesive Tool-Free Fit Interior Protection Black Overview The Toyota Land Cruiser 250 — sold globally as the Prado LC250 — represents a significant generational step forward from its predecessor, bringing a more refined interior with cleaner lines and higher-grade surface finishes. Owners who specify the LC250 do so because they demand both capability and quality, and keeping that interior looking as it did on day one is a priority that most enthusiasts share. The window control panel is one of the most frequently touched surfaces in any vehicle cabin. Over time, repeated contact causes micro-abrasions, discolouration, and a gradual degradation of the original finish — particularly on gloss and satin trims. This silicone window control panel cover wraps precisely around the OEM switch panel, acting as a protective layer that absorbs daily contact without altering the usability of a single button. Manufactured from high-quality silicone, the cover is dimensionally accurate for the 2024–2025 Land Cruiser 250 left-hand drive configuration. It drops into place without any adhesives or tools, preserving the panel beneath in factory condition. When it needs cleaning, simply lift it off, rinse it, and refit — a level of practicality that matches the LC250's character perfectly. What's Included 🪟 Window Control Panel Cover × 1 High-grade silicone, black finish, LHD specific Product Highlights Precision fit for Toyota Land Cruiser 250 / Prado LC250 (2024–2025) High-quality silicone construction — durable, flexible, and long-lasting Protects the OEM panel surface from abrasion and daily wear No adhesives required — preserves the original panel underneath Fully removable and washable — clean in seconds, refit instantly Colour-matched black finish integrates seamlessly with factory interior Soft-touch silicone does not interfere with button operation Prevents gloss surface degradation, discolouration, and fingerprint buildup Tool-free installation — drops directly onto the existing panel Enhances the interior aesthetic while retaining full OEM functionality Compatibility Vehicle Year Range Drive Configuration Fitment Toyota Land Cruiser 250 (LC250) 2024–2025 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser Prado (LC250) 2024–2025 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (LC250) 2024–2025 Right Hand Drive (RHD) Not Compatible Toyota Land Cruiser 300 (LC300) 2021–2025 All Not Compatible Toyota Land Cruiser 200 (LC200) All Years All Not Compatible Installation Notes Difficulty: ⬜⬜⬜⬜⬜  Very Easy  ·  Estimated Time: Under 2 minutes  ·  Tools Required: None Ensure your LC250's door panel and window control area are clean and free from dust or debris before fitting. Hold the silicone cover with the button cutouts aligned to your vehicle's corresponding window and mirror switch positions. Gently press the cover down over the OEM panel, working from one end to the other to ensure even seating across the surface. Confirm each button cutout is correctly aligned and that all switches operate freely without resistance. To remove for cleaning, simply peel back from one corner and lift away — no tools or force required. ⚠ Important: This cover is designed exclusively for Left Hand Drive (LHD) Toyota Land Cruiser 250 / Prado LC250 models (2024–2025). It is not compatible with Right Hand Drive configurations. Please verify your vehicle's drive orientation before purchasing. Protect What You've Invested In Your LC250's interior is built to impress. Keep it that way from day one — this is the kind of thoughtful, low-profile upgrade that makes a lasting difference without changing a thing about how the vehicle looks or feels. Shop LC250 Interior Accessories 🏷 Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only. Please verify your vehicle's exact specification — including drive configuration and model year — prior to purchase.

Victorious Automotive · Range Rover Sport L494 · Window Visors Window Visor Vent Shades for 2014–2023 Range Rover Sport — Rain, Sun & Wind Guard Deflectors Precision-moulded side window deflectors that let you keep the windows cracked in any weather — rain, wind, or glaring sun — without compromising the Sport's refined interior environment. Range Rover Sport L494 2014–2023 High-Grade ABS Plastic No-Drill Fit Rain Deflector Wind Guard Sun Visor ISO 9001 Certified Set of 4 Overview The Range Rover Sport L494 is built for owners who demand performance without compromise — a vehicle equally at home on a motorway cruise as it is navigating demanding terrain. That same standard should extend to every accessory fitted to it. These window visor vent shades are engineered specifically for the L494 Sport's door aperture profile, sitting flush with the roofline and complementing the vehicle's aerodynamic silhouette rather than fighting against it. Crafted from high-impact ABS plastic and formed to match the exact curvature of the Range Rover Sport's door frames, these deflectors create a controlled gap that allows fresh air to circulate inside the cabin even when rain is falling. The result is a noticeably fresher interior environment, reduced fogging on cooler days, and a meaningful reduction in wind buffeting noise when windows are slightly open at speed. Unlike generic universal-fit deflectors that sit awkwardly on the glass and peel away over time, these are tailored to the Sport's door geometry and install via a secure channel-mount system that requires no drilling, no adhesive, and no modification to your vehicle. Once fitted, they present a clean, tinted finish that reads as a factory option — which is precisely the level of detail Range Rover Sport owners expect. What's Included 🪟 Front Left Visor Driver's side, pre-formed to door profile 🪟 Front Right Visor Passenger's side, mirror-matched fit 🪟 Rear Left Visor Rear door, full-length deflector 🪟 Rear Right Visor Rear door, full-length deflector 📋 Fitment Instructions Step-by-step installation guide included Product Highlights Precision-moulded to fit Range Rover Sport L494 door profiles exactly — no gaps, no overhang Deflects rain away from the window opening, keeping cabin dry with windows ajar Reduces wind buffeting noise when driving with windows cracked at motorway speeds Improves interior air circulation without exposing passengers to direct wind or rain No-drill, channel-mount installation — preserves your vehicle's factory door finish High-impact ABS plastic construction resists UV fading, cracking, and warping over time Tinted smoke finish integrates cleanly with the Sport's window line aesthetic ISO 9001 certified production process ensures consistent quality across every unit Helps reduce interior fogging in cooler, damp conditions by allowing controlled ventilation Suitable for both standard and SVR Sport variants across the full 2014–2023 model range Compatibility Vehicle Code Years Fit Range Rover Sport (Standard) L494 2014–2023 Direct Fit Range Rover Sport SVR L494 2015–2023 Direct Fit Range Rover Sport HSE / HST L494 2014–2023 Direct Fit Range Rover Sport SE / Autobiography L494 2014–2023 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2022–2026 Range Rover Sport L461, please visit our New Range Rover Sport L461 collection for compatible accessories. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Clean the door frame channel and window rubber seals on all four doors with a damp cloth. Ensure the surface is completely dry before proceeding. Lower each window fully before beginning fitment. This allows easier access to the door channel and prevents any pressure on the glass during installation. Starting at the front of the door, locate the leading edge of the visor and slide it into the upper door channel. Work gradually from front to rear, pressing the retention clips firmly into position as you go. Once seated, raise the window slowly to check that the visor does not obstruct window travel. The glass should pass smoothly without catching the visor's lower edge. Repeat for all four doors. No adhesive, drilling, or modifications to the door frame are required. ⚠ Note: Verify your exact model year before fitting. Vehicles produced in the 2022–2023 model year should be confirmed as L494 generation — not the newer L461 platform — as door profiles differ. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you fit. Built for the Range Rover Sport. Finished to Match. At Victorious Automotive, every product we list is selected for owners who care about the details. These window visors aren't an afterthought — they're a considered addition to one of the finest SUVs on the road. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Windows Control Panel Decoration Protective Cover — Toyota Land Cruiser 250 Prado 2024 A precision-fit ABS overlay that shields your LC250's window control panel from daily wear while delivering an instant interior upgrade — available in Carbon Fibre, Wood Grain, and Gloss Black finishes. LC250 Prado 2024 ABS Material LHD & RHD Carbon Fibre Wood Grain Gloss Black Paste Fit No Drilling Interior Trim Overview The 2024 Toyota Land Cruiser 250 — sold in many markets as the Prado — represents a significant step forward in cabin refinement. Its interior balances genuine utility with elevated material quality, and owners who invest in the LC250 expect every touchpoint to feel intentional and considered. The window control panel, used dozens of times a day by every occupant, is one of the first areas to show signs of wear — scuffs, discolouration, and surface scratches accumulate quickly on unprotected trim. This Windows Control Panel Decoration Protective Cover is engineered to fit the 2024 LC250 precisely, dropping directly over the factory panel without modification. Constructed from high-grade ABS thermoplastic, it adds a tactile and visual layer that complements the vehicle's existing interior language. Whether you choose the Carbon Fibre pattern for a sporting aesthetic, the Wood Grain finish for classic warmth, or the understated Gloss Black for a sleek, monochromatic look — each option is designed to feel factory-fitted rather than aftermarket. The adhesive installation system uses automotive-grade 3M-style tape backing, meaning fitment is clean, residue-free on removal, and repeatable. There are no visible fixings, no drilling, and no risk to your factory panels. For LC250 owners who take pride in maintaining a pristine cabin, this cover represents a low-effort, high-impact upgrade that pays for itself in preserved resale value alone. What's Included 🪟 Window Control Panel Cover 1 × precision-fit ABS overlay for LC250 door panel 🔲 Pre-Applied Adhesive Automotive-grade tape pre-fitted to reverse of cover 📋 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Precision-moulded for the 2024 Toyota Land Cruiser 250 / Prado door panel geometry Available in Carbon Fibre Pattern, Wood Grain, and Gloss Black finishes Compatible with both Left Hand Drive and Right Hand Drive variants High-grade ABS construction — resistant to heat, UV fading, and impact Protects factory panel from scratches, scuffs, and daily contact wear Adhesive paste installation — no drilling, cutting, or modification required Low-profile design that integrates seamlessly with OEM interior styling Fully reversible — factory panel remains undamaged beneath the cover Maintains full access to all window control switches and buttons Elevates interior appearance with a premium, purposeful finish Compatibility Vehicle Year Drive Fit Toyota Land Cruiser 250 (Prado) 2024 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (Prado) 2024 Right Hand Drive (RHD) Direct Fit Toyota Land Cruiser 300 2021–2024 LHD / RHD Not Compatible Toyota Land Cruiser 200 2008–2021 LHD / RHD Not Compatible Toyota Prado 150 Series 2009–2023 LHD / RHD Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Select the correct finish variant (Carbon Fibre, Wood Grain, or Gloss Black) and confirm your vehicle's drive orientation (LHD or RHD) before beginning. Thoroughly clean the window control panel surface using an isopropyl alcohol wipe or clean microfibre cloth. Remove all dust, oils, and residue. Allow to dry fully — this step is critical to adhesion quality. Dry-fit the cover over the panel without removing the adhesive backing. Confirm alignment with all switch apertures and panel edges before committing. Peel the protective film from the adhesive tape on the reverse of the cover. Align carefully with the factory panel, starting from one edge and pressing down progressively to avoid air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact, paying particular attention to corners and edges. Allow the adhesive to cure for a minimum of 2 hours before operating the window switches to ensure a secure, lasting bond. ⚠ Note: Do not install in temperatures below 10°C / 50°F, as cold conditions significantly reduce adhesive performance. If the cover needs to be repositioned, do so immediately before the adhesive sets fully. Attempting to reposition after curing may reduce bond strength. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser 250 interior accessories — from dashboard trim covers to gear surround overlays — all engineered to the same standard of precision fit and finish. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Toyota, Land Cruiser, Prado, and LC250 are registered trademarks of Toyota Motor Corporation.

Victorious · Toyota Land Cruiser LC300 · Interior Control Panel Decoration Protective Stickers – LC300 2021–2023 Elevate your LC300 interior with premium protective trim that combines style, durability, and precision fitment. LC300 2021–2023 Stainless Steel ABS Plastic 3 Finishes Easy Install Overview The Toyota Land Cruiser 300 demands respect. It's a machine built for purpose, engineered for adventure, and trusted by enthusiasts worldwide. Your LC300's interior deserves the same attention to detail as every other component—and this is where precision protective trim makes all the difference. Our Control Panel Decoration Stickers are engineered specifically for the 2021–2023 LC300, transforming the cabin with a refined, bespoke upgrade. Available in three distinct finishes—Black Brushed, Silver Matte, and Carbon Fiber Pattern—these stickers protect the original control panel from scratches, dust, and wear while delivering a premium aesthetic that complements both stock and modified interiors. Built from either durable Stainless Steel (A Style) or lightweight ABS Plastic (B Style), each set features precision adhesive for secure, permanent installation. Unlike cheap alternatives, our stickers are engineered to last, resist thermal stress, and maintain their finish over years of daily use. What's Included 📦 Complete Panel Set All trim pieces for full coverage 🔧 Precision Adhesive Professional-grade for secure fit 📋 Installation Guide Step-by-step instructions included Product Highlights Custom-fit design engineered for LC300 (2021–2023) Black Brushed finish for modern, understated elegance Silver Matte option for contemporary minimalism Carbon Fiber Pattern for aggressive, technical styling A Style: Premium Stainless Steel construction B Style: Lightweight ABS Plastic alternative Thermal-resistant materials withstand cabin temperature extremes Special-formula adhesive ensures permanent, bubble-free application Protects original panel from scratches, dust, and UV damage Premium finish that enhances resale value and interior appeal Compatibility & Variants Variant Style Material Colour LC300 2021–2023 A Style Premium Stainless Steel Black Brushed / Silver Matte Direct Fit B Style Standard ABS Plastic Carbon Fiber / Silver Matte Direct Fit Installation Difficulty: Beginner | Time: 30–45 Minutes Prepare the surface: Clean the control panel thoroughly with a microfiber cloth and isopropyl alcohol. Allow to dry completely for optimal adhesive contact. Position the sticker: Carefully align the decorative sticker with the panel edges, starting from the centre and working outward to avoid air bubbles. Apply with pressure: Use steady, even pressure with a soft applicator tool, working from the middle toward the edges to ensure full contact. Final inspection: Check all edges and seams for secure adhesion. Allow 24 hours of cure time before using the vehicle. Avoid moisture: Do not expose to water or humidity during the first 48 hours of installation. Important: Ensure the control panel surface is completely clean and dry before installation. Any dust or residue will compromise adhesion and finish quality. Upgrade Your LC300 Interior Today Transform your cabin with precision-engineered protective trim that elevates both aesthetics and durability. Every LC300 deserves better. Order now and experience the Victorious difference. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars — 12,300+ reviews 🚚 Worldwide shipping — DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover, or any other manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket enhancement only.

Victorious Automotive · In-Car Technology · Android Entertainment Wireless Android Auto Adapter — Plug-and-Play Dongle for Factory Wired Android Auto Systems Convert your car's factory wired Android Auto connection to fully wireless in minutes — no apps, no cables, no compromises. Android Auto Wireless Plug & Play 5GHz Wi-Fi 600+ Car Models Auto-Connect Voice Control No App Required 12-Month Guarantee Overview Modern Land Rover, Range Rover, and Defender models equipped with factory-fitted Android Auto are exceptionally capable infotainment platforms — but the requirement to plug in your phone every single journey chips away at that premium feel. A trailing USB cable across the centre console is the last thing a Range Rover Vogue or Defender owner should have to tolerate. This Wireless Android Auto Adapter is a compact, intelligent dongle that slots directly into your car's USB port and seamlessly upgrades your wired Android Auto system to a fully wireless experience. Your phone connects automatically the moment the engine starts — whether it's in your pocket, your bag, or the wireless charging pad. Navigation, calls, music, and voice control all work exactly as before, simply without the wire. Built around a 5GHz Wi-Fi module for fast, stable connectivity, the adapter requires a single initial setup and then runs entirely autonomously. It supports touch screen, steering wheel controls, knob operation, and voice commands — preserving every feature of your factory system with zero compromise to the driving experience. What's Included 📦 Wireless Android Auto Adapter The core dongle unit — compact and discreet 🔌 USB Connection Cable For connecting the dongle to your car's USB port 📄 Quick Start Guide Simple step-by-step setup instructions 🛡️ 12-Month Warranty Card Backed by dedicated after-sale support Product Highlights Converts wired Android Auto to wireless — zero cable clutter in the cabin Single initial setup — automatically reconnects every time you start the car 5GHz Wi-Fi module for fast, reliable, low-latency wireless connection Compatible with 600+ car models including Land Rover, Range Rover, and Defender Supports full Android Auto functionality — navigation, calls, music, and more Retains all control inputs — touch screen, steering wheel, knob, and voice Plug and play — no additional apps, drivers, or firmware updates required Connects even with your phone in a pocket, bag, or on a wireless charging pad Voice control fully supported via Google Assistant through Android Auto 12-month after-sale warranty with 24-hour email support response guarantee Compatibility Your vehicle must have a factory-fitted wired Android Auto system to work with this adapter. This adapter is for Android Auto only and is not compatible with Apple CarPlay systems. Vehicle Code Years Compatibility Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Defender L663 2020–2026 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Velar L560 2018–2022 Direct Fit Range Rover Evoque L551 2019–2026 Direct Fit Range Rover Evoque L538 2011–2018 Check Factory Fit Land Rover Discovery 5 L462 2017–2026 Direct Fit Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2019–2026 Direct Fit Land Rover Defender 2004–2016 Pre-2016 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Toyota Land Cruiser LC300 2021–2026 Direct Fit Toyota Land Cruiser LC250 2024–2026 Direct Fit Mercedes G-Class W463A/W464 2018–2026 Direct Fit Installation Notes ⚡ Difficulty: Easy  ·  Setup Time: Under 5 Minutes  ·  No Tools Required Ensure your vehicle has a factory-fitted wired Android Auto system. If in doubt, plug your Android phone into the car's USB port — if Android Auto launches, you're compatible. Plug the Wireless Android Auto Adapter into your car's USB port (the same port you previously used for your wired Android Auto connection). Start your engine. The adapter will power on and enter pairing mode — indicated by a solid or flashing LED on the dongle. On your Android phone, enable Bluetooth and Wi-Fi. Open the Android Auto app if it does not launch automatically. Follow the on-screen prompts to pair your phone with the adapter via Bluetooth. The adapter will then switch to a 5GHz Wi-Fi connection for full wireless operation. Once the initial pairing is complete, your phone will connect automatically every time you start the car — no further action required. ⚠ Important: This adapter is designed exclusively for Android Auto. It will not function with Apple CarPlay systems. Your vehicle must have factory Android Auto — aftermarket head unit compatibility is not guaranteed. Only one phone can be actively paired at a time; to switch to a different phone, repeat the initial pairing process. Shop by Vehicle 🚙 Range Rover L460 2022–2026 Vogue 🚙 Range Rover Sport L461 2022–2026 🚙 Defender L663 2020–2026 🚙 Discovery 5 2017–2026 🚙 Evoque L551 2019–2026 🚙 Range Rover Velar 2018–2022 Upgrade Your Drive Today Cut the cable and enjoy the seamless, premium in-car experience your Land Rover or Range Rover was always meant to deliver. Free your centre console, keep your eyes on the road, and let Android Auto connect the moment you turn the key. Shop Android Entertainment → Save 20% when you buy any 2 items — use code: 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Jaguar Land Rover (JLR), Land Rover, Range Rover, Toyota, Mercedes-Benz, or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Always verify compatibility with your specific vehicle configuration before purchase. If you have any questions, contact our team at +44 203 943 9919.

Victorious Automotive · Mercedes W222 S-Class · Connectivity Upgrades Wireless Apple CarPlay & Android Auto Adapter — Mercedes W222 S-Class (2013–2020) Bring full wireless CarPlay and Android Auto connectivity to your W222 S-Class factory screen — no permanent modifications, no compromises. W222 S-Class 2013–2020 NTG 5.0 Wireless CarPlay Android Auto Plug & Play Screen Mirroring Voice Control Bluetooth AUX Audio Overview The Mercedes-Benz W222 S-Class is one of the most accomplished luxury saloons ever produced — a vehicle built around the idea that technology and refinement should coexist seamlessly. From its air suspension to its Burmester audio system, every detail is deliberate. Yet for owners who live by Apple or Android ecosystems, the factory COMAND infotainment system — while capable — falls short of the fluid, connected experience that modern smartphones now demand. This wireless CarPlay and Android Auto interface adapter changes that entirely. Designed specifically for the W222 S-Class running Mercedes NTG 5.0, it integrates directly with your factory screen without cutting a single wire or voiding your vehicle's configuration. Once connected, your existing display becomes the home screen for Waze, Google Maps, Apple Maps, Spotify, WhatsApp, and every other app you rely on — all controlled via your car's native touchscreen, steering wheel controls, or voice command. The wireless capability is the standout feature here. Your phone connects automatically via Bluetooth the moment you enter the cabin — no cables, no fumbling, no delay. Wired USB connection is also fully supported for those who prefer it. Whether you're heading into the City or navigating cross-country, this adapter turns your W222 into the connected, intelligent machine it was always meant to be. What's Included 📦 CarPlay / Android Auto Interface Main adapter unit — plug and play fitment for NTG 5.0 🔌 USB Cable For wired phone connection and device charging 📋 Installation Manual Step-by-step guide for straightforward self-installation Product Highlights Wireless CarPlay — connects automatically via Bluetooth, no cable required Full Android Auto support, both wired and wireless modes Integrates with factory W222 screen — no permanent modifications Superior audio output via AUX integration into the factory sound system Screen mirroring for both iPhone and Android smartphones Hands-free calling and message reading via Siri or Google Assistant Supports Google Maps, Waze, Apple Maps and all major navigation apps Camera input compatibility — front, rear, and 360-degree camera support Additional USB port for simultaneous charging and media playback Multilingual interface — 15 languages including English, Arabic, German, and more Compatibility Model Years System Fitment Mercedes W222 S-Class 2013–2020 NTG 5.0 Direct Fit Mercedes C-Class (W205) 2014–2018 NTG 5.0 Direct Fit Mercedes E-Class (W213) 2016–2020 NTG 5.0 Direct Fit Mercedes A-Class (W176) 2015–2018 NTG 5.0 Direct Fit Mercedes GLE (W166) 2015–2019 NTG 5.0 Direct Fit Mercedes GLB (X247) 2019–2021 NTG 5.0 Direct Fit Mercedes CLA (C117) 2013–2019 NTG 5.0 Direct Fit Mercedes W222 S-Class (post-2020 MBUX) 2021+ MBUX Not Compatible Mercedes W222 S-Class (pre-NTG 5.0) Pre-2013 NTG 4.x Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  No Tools Required Ensure your Mercedes W222 S-Class is fitted with the NTG 5.0 COMAND system (model years 2013–2020). Check your infotainment version in the COMAND settings menu if unsure. Locate the USB and AUX ports in your vehicle's centre console or glovebox area — the adapter connects via these existing ports. Plug the interface adapter into the factory USB and AUX inputs as directed in the included installation manual. Power on your vehicle and allow the COMAND system to boot fully. The adapter interface will appear on the factory screen. On your smartphone, enable Bluetooth and pair with the adapter. For wireless CarPlay, ensure Wi-Fi is also enabled on your iPhone. Select CarPlay or Android Auto from the on-screen menu. The interface will launch on your factory display within seconds. For subsequent journeys, your phone will reconnect automatically — no manual pairing needed. ⚠ Compatibility Note: This adapter is designed exclusively for Mercedes NTG 5.0 systems. It is not compatible with the newer MBUX infotainment platform found in post-2020 S-Class models. Please confirm your system version before ordering. If you are unsure, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm). Technical Specifications Specification Detail Installation Type Plug and Play — no wiring modification required CarPlay Audio Output AUX via factory sound system Phone Connection Bluetooth (wireless) / USB (wired) iPhone Compatibility iPhone 5 and above (iOS support) Android Compatibility Android smartphones with Android Auto support Voice Control Siri, Google Assistant Camera Inputs Front, rear, 360-degree camera support Additional USB Port Charging + media playback Language Support English, Chinese, Japanese, French, Korean, Portuguese, Russian, Spanish, Thai, German, Indonesian, Turkish, Arabic, Hebrew, Ukrainian Compatible System Mercedes NTG 5.0 Upgrade Your W222 S-Class Today Wireless CarPlay and Android Auto — factory screen, zero modifications, instant connectivity. A straightforward upgrade that transforms how you interact with your S-Class every single day. Shop the W222 Adapter Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Mercedes-Benz AG, Daimler AG, or any of their subsidiaries. All vehicle model names, codes, and trademarks are used for reference and compatibility purposes only. Please verify your vehicle's infotainment system version prior to purchase. For assistance, contact our team directly.

Victorious · Range Rover Evoque · Infotainment Wireless Apple CarPlay & Android Auto for Range Rover Evoque 2013–2017 Upgrade your Evoque's factory infotainment with seamless wireless smartphone integration, navigation, and hands-free control. L538 · Evoque 2013–2017 Apple CarPlay Android Auto Wireless + USB GPS Navigation Overview The Range Rover Evoque L538 deserves infotainment that matches its refined design and capable nature. This factory-integrated wireless CarPlay and Android Auto system replaces the limitations of your standard entertainment unit with a modern, smartphone-centric interface—all while retaining your original screen and steering wheel controls. Connection is effortless: pair via Bluetooth and Wi-Fi for true wireless functionality, or use USB for wired connectivity and simultaneous charging. Your iPhone's Siri voice control activates with "Hey Siri," allowing complete hands-free operation of calls, messages, navigation, and music. Android users enjoy the same seamless integration with Google Assistant. The system mirrors your phone's navigation apps—Apple Maps, Google Maps, Waze—with live traffic data. Stream music from Spotify, Apple Music, Amazon Music, and others through your factory speakers. Optional aftermarket camera integration (360° views with dynamic guidelines) transforms parking and reversing. A powerful, adjustable EQ lets you tailor audio to your preference. Home/Back button instantly returns to the original Range Rover interface if needed. What's Included 📱 Wireless CarPlay Module Bluetooth & Wi-Fi enabled 🔌 USB Connection Cable Wired mode + charging support 📍 GPS Navigation Ready Maps, Waze, live traffic 🎚 Equaliser Control Pop, Rock, Soft, Standard presets 📖 Installation Manual Step-by-step printed guide 🎥 Camera-Ready Interface Front, rear, 360° compatible Product Highlights Wireless pairing via Bluetooth & Wi-Fi; USB fallback mode included Apple CarPlay & Android Auto fully integrated into factory screen Hands-free voice control with Siri & Google Assistant Live GPS navigation: Apple Maps, Google Maps, Waze all supported Stream Spotify, Apple Music, Amazon Music through factory speakers Optional aftermarket camera integration (360° & dynamic lines) Powerful adjustable EQ with multiple audio presets Full steering wheel & control knob compatibility—original buttons work Phone charging via USB port; USB media playback also available One-button return to factory interface (Home/Back button) Compatibility Model Year Range Status Range Rover Evoque L538 2013–2017 Direct Fit Range Rover Evoque L551 (2018+) 2018–Present Not Compatible Other Range Rover models Various Not Compatible Pre-Purchase Check: Verify that your Evoque's AUX input is activated or that the armrest box has an AMI interface. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if unsure. Installation Difficulty Level: Intermediate | Time: 1–2 hours Disconnect the negative battery terminal for safety. Remove the dashboard trim panels around the factory infotainment unit using trim removal tools (included with many aftermarket kits, or available separately). Carefully disconnect the factory unit's power, ground, and antenna connectors. Install the new CarPlay module in the designated location (typically behind or integrated with the factory screen mount). Connect the power harness to the vehicle's ACC and Ground circuits; connect antenna to the module. Route the USB connection cable to your preferred mounting location (cup holder, armrest, or centre console). Reinstall dashboard trim panels, ensuring all clips and screws are secure. Reconnect the battery terminal and power on the vehicle. Pair your smartphone via Bluetooth in the system menu, then test wireless and USB connectivity. Calibrate EQ settings and verify steering wheel controls respond correctly. Note: Installation may void your factory warranty. We recommend professional fitment by a qualified Land Rover technician if you are unfamiliar with vehicle electrical systems. A printed step-by-step manual is included; refer to it and contact support if you encounter any issues. Ready to Elevate Your Evoque's Infotainment? Transform your Range Rover Evoque L538 with wireless CarPlay and Android Auto. Enjoy seamless navigation, hands-free calls, and premium audio control—all while keeping your eyes on the road and your hands on the wheel. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent specialist retailer and is not affiliated with Land Rover, Jaguar Land Rover plc, or any of their subsidiaries. Land Rover, Range Rover, Evoque, and related marks are registered trademarks of Jaguar Land Rover Limited. This product is designed for compatibility with the specified models and is sold as an aftermarket accessory. Installation may affect your vehicle's manufacturer warranty. Always consult your vehicle's handbook and a qualified technician before installation.

Porsche · Boxster 2010–2016 · Infotainment Upgrade Wireless Apple CarPlay Adapter for Porsche Boxster 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full smartphone mirroring to your Porsche Boxster's factory PCM3.1 screen — no head unit replacement required. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Aluminium Housing Overview The Porsche Boxster is a driver's car in every sense — precise, communicative, and deeply rewarding. But for all its engineering brilliance, the PCM3.1 infotainment system found in 2010–2016 examples was never designed with modern smartphone integration in mind. Navigation felt dated, music playback was cumbersome, and hands-free calling was far from seamless. This Wireless Apple CarPlay adapter plugs directly into your Boxster's existing PCM3.1 architecture and unlocks a completely transformed in-car experience. Using your car's native display and original controls, you gain full access to wireless Apple CarPlay, wired CarPlay, Android Auto, and Android Mirroring — without touching your factory head unit or voiding your setup. Designed as a true plug-and-play module, the adapter communicates via CAN-Bus, preserving your steering wheel controls and original button layout. Installation requires no cutting or splicing — it simply slots into place, making it as clean as it is capable. Whether you're navigating via Waze, streaming Spotify, or simply taking a call hands-free with Siri, this adapter makes every drive measurably better. What's Included 📦 CarPlay Adapter Module PCM3.1 compatible, aluminium housing 🎙️ External Microphone Dedicated mic for hands-free calls 🔌 Wiring Harness Direct-fit CAN-Bus connector 🔩 Mounting Hardware Includes screws for Sirius Radio fitments 📄 Installation Guide Step-by-step fitment instructions Product Highlights Wireless Apple CarPlay — no cable needed once paired Wired Apple CarPlay also supported for stable connections Android Auto compatibility for Google-ecosystem users Android Mirroring to cast your phone screen directly Siri voice control for fully hands-free operation Original steering wheel controls remain fully functional Supports aftermarket front and reverse cameras Offline media playback via USB flash drive (up to 32GB) Airplay and Android Mirror-linking for HD video streaming Plug-and-play CAN-Bus integration — no head unit swap required Compatibility Model Years System Fitment Boxster 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Cayman 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any Porsche with CD-AUX button — Non-PCM3.1 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Confirm your Boxster's PCM system has a NAVI button on the control panel. If your car features a CD-AUX button instead, this adapter is not compatible — please contact us before ordering. If your vehicle has Sirius Satellite Radio installed, contact us prior to ordering — we will include the additional screws needed to accommodate this fitment. Remove the factory PCM3.1 unit following standard Porsche trim removal procedures (no cutting or permanent modification required). Connect the adapter's CAN-Bus harness to the factory wiring loom using the included plug-and-play connector. Route and secure the dedicated external microphone — this replaces the original mic, as the factory microphone is integrated with the SOS emergency system. Reassemble the trim, power on the system, and follow the on-screen pairing guide to connect your iPhone or Android device. ⚠ Important: A dedicated external microphone is included and must be used. The factory microphone is integrated into Porsche's SOS emergency system and cannot be repurposed for CarPlay calls without compromising that functionality. Upgrade Your Porsche. Drive Smarter. Victorious Automotive brings you premium in-car technology upgrades trusted by enthusiasts worldwide. Rated 4.9/5 stars from over 12,300 verified reviews — and backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx / UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All manufacturer names, model designations, and trademarks are used solely for fitment reference purposes. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC.

Porsche · Cayenne PCM3.1 · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayenne 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full mirror-linking to your Porsche PCM3.1 system — with zero permanent modifications and plug-and-play simplicity. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Hands-Free Calling iOS & Android Aluminium Housing Overview The Porsche Cayenne built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — a capable unit for its era, but one that was never designed for the smartphone-connected world we now live in. Navigation has moved on, streaming music is the norm, and hands-free communication is an expectation rather than a luxury. This adapter bridges that gap entirely. This PCM3.1 CarPlay retrofit module slots directly into your existing head unit via the Can-Bus interface, preserving your original steering wheel controls and factory buttons while unlocking wireless Apple CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. There's no cutting of wires, no permanent alterations, and no compromise to your vehicle's existing functionality — just a clean, professional upgrade that feels like it should have been there from day one. Whether you're routing through Waze, streaming Spotify, making a hands-free call via Siri, or monitoring a reversing camera feed, this adapter handles it all through the screen you already have. The aluminium housing keeps heat dissipation efficient, and with iOS 9 or above supported — including all current iPhone models — compatibility is essentially universal. What's Included 📦 CarPlay Adapter Module PCM3.1-specific retrofit box, aluminium housing 🔌 Can-Bus Interface Harness Plug-and-play vehicle connection loom 🎙️ Dedicated Microphone Included to preserve SOS/factory mic compatibility 📡 Wireless Bluetooth Receiver For wireless iPhone pairing without USB 🔧 Mounting Hardware Installation screws and fixings included 📋 Installation Guide Step-by-step instruction sheet Product Highlights Wireless Apple CarPlay — connect iPhone without a cable via Bluetooth pairing Wired Apple CarPlay also supported for stable, low-latency connection Android Auto compatible — full Google Maps, Assistant & media access Android screen mirroring for full device display on the factory screen Original steering wheel controls fully retained via Can-Bus integration Supports front and reverse aftermarket camera feeds Siri voice control for hands-free navigation, calls, and messaging Offline video and music playback via USB flash drive (up to 32GB) HD video streaming via Airplay and Android Mirror-Link Supports Sirius Satellite Radio vehicles — contact us for fitment screws Compatibility Model Years System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Vehicles with CD-AUX button (no NAVI) Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Fit Recommended Confirm your PCM head unit has a NAVI button on the control panel before beginning. If your vehicle only has a CD-AUX button, this product is not compatible. Remove the centre console trim panels to access the back of the PCM3.1 unit — refer to your vehicle-specific trim removal guide. Connect the Can-Bus interface harness from the adapter module to the corresponding port on the rear of the PCM3.1 unit. Route and connect the dedicated microphone to the adapter module, positioning it near the A-pillar or overhead console for best call quality. Secure the adapter module in a suitable location behind the dash using the included mounting hardware, ensuring adequate ventilation. Refit all trim panels, power on the vehicle, and follow the on-screen pairing instructions to connect your iPhone wirelessly via Bluetooth. ⚠ Important: If your vehicle is fitted with Sirius Satellite Radio, please contact us before installation. We will include the specific additional screws required to ensure a clean, secure fit. A dedicated microphone is included in the box as the factory microphone is integrated with the OEM SOS system and cannot be reused. Upgrade Your Porsche. No Compromise. Join over 12,300 verified customers who've transformed their driving experience with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop All Upgrades Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used for compatibility identification purposes only. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC. Always verify compatibility with your specific vehicle configuration before purchase.

Porsche · Cayman · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayman 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay, Android Auto, and full mirror-linking into your Porsche Cayman's factory PCM3.1 system — no head unit swap, no permanent modifications. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Plug & Play iOS 9+ Aluminium Housing 12V Siri Voice Control Overview The Porsche Cayman built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — capable for its era, but without the native smartphone integration that modern driving demands. Whether you're navigating unfamiliar roads, streaming music, or simply keeping your phone out of your hand, the absence of CarPlay is a daily frustration for many Cayman owners. This PCM3.1 Wireless Apple CarPlay Adapter is engineered specifically for Porsche's factory system architecture. It integrates directly into your existing head unit, retaining all original controls — steering wheel buttons, screen, and interface logic — while adding full wireless Apple CarPlay, Android Auto, and Android Mirror-linking capability. There is no requirement to replace your factory system or drill any new holes. Designed as a true plug-and-play solution, the adapter connects via the factory harness and communicates over CAN-Bus, meaning it works seamlessly with your car's electronics. Once paired, your iPhone connects automatically every time you get in — no cable, no fuss. Siri voice control, real-time navigation, hands-free calling, Spotify, Waze, and more are all available at a touch or a word. What's Included 📦 CarPlay Adapter Module PCM3.1-specific, aluminium housing 🔌 Wiring Harness Factory-matched CAN-Bus connection 🎙️ External Microphone Required — replaces factory SOS-integrated mic 📡 Bluetooth Antenna Enables wireless iPhone pairing 🔧 Mounting Hardware Including screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step printed instructions Product Highlights Wireless Apple CarPlay — iPhone connects automatically via Bluetooth, no cable required Wired CarPlay also supported for maximum stability when preferred Full Android Auto compatibility for Google Maps, Spotify, and more Android Mirror-linking to cast your Android screen to the factory display Retains all original steering wheel and dashboard button controls Siri voice control for completely hands-free operation while driving Supports aftermarket and OEM reverse or front camera integration Offline video and music playback via USB flash drive (up to 32GB) Airplay support for wireless HD video streaming from iOS devices Plug-and-play CAN-Bus integration — no permanent modifications to your Porsche Compatibility This adapter is designed for Porsche vehicles fitted with the PCM3.1 infotainment system. Compatibility requires a NAVI button on the control panel. Vehicles with a CD-AUX button only are not supported. Model Years System Fit Cayman 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit Boxster 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any model with CD-AUX only Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes Confirm your vehicle has a NAVI button on the PCM3.1 control panel before beginning installation. Power down the vehicle and remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Locate the factory harness connector on the rear of the head unit and connect the supplied wiring harness from the adapter module. Mount the adapter module in a suitable location behind the dashboard, ensuring adequate ventilation and no pinched cables. Route and connect the supplied external microphone to a discreet location on the A-pillar or sun visor area. Reinstall the head unit and trim panels, then power on the vehicle to verify the system initialises correctly. Pair your iPhone via Bluetooth — subsequent connections will be fully automatic and wireless. ⚠ Important: If your Porsche is equipped with Sirius Satellite Radio, additional mounting screws are required. Please notify us at the time of ordering and we will include them at no charge. The supplied external microphone must be used — the factory microphone cannot be retained due to its integration with the Porsche SOS emergency system. Upgrade Your Drive Your Porsche Cayman deserves a connected cockpit. This wireless CarPlay adapter brings modern smartphone integration to your PCM3.1 system without compromising the factory look or feel. Shop This Adapter Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model references, and trademarks are used for fitment identification purposes only. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended where required.

Victorious Automotive · Porsche Macan · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche Macan 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay and Android Auto to your Porsche Macan's factory PCM3.1 system — plug-and-play, no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Porsche Macan Plug & Play Siri Voice Control Camera Support Steering Wheel Control iOS & Android Overview The Porsche Macan (2010–2016) equipped with the PCM3.1 infotainment system is a driver's machine — precise, purposeful and beautifully engineered. But its factory connectivity falls short of what today's drivers expect. Native Apple CarPlay or Android Auto simply wasn't available at the time of manufacture, leaving owners relying on outdated Bluetooth audio or cable workarounds that feel out of place in a car of this calibre. This PCM3.1 wireless Apple CarPlay adapter resolves that entirely. Engineered specifically for Porsche's factory head unit, it integrates seamlessly behind the scenes — no screen replacement, no head unit swap, no permanent wiring changes. Once installed, your existing PCM3.1 display becomes a fully functional CarPlay and Android Auto interface, accessible wirelessly from your iPhone the moment you get in the car. Steering wheel controls continue to function as expected, original buttons retain their factory behaviour, and a dedicated microphone is included to preserve safe hands-free calling — since the factory microphone is tied to Porsche's SOS system. This is the clean, factory-grade upgrade your Macan deserves. What's Included 📦 CarPlay Adapter Module PCM3.1-specific interface box 🎙️ Dedicated Microphone For hands-free calls, replaces SOS-integrated mic 🔌 Wiring Harness Direct plug-in, no splicing required 🔧 Mounting Hardware Includes screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step instructions included 🖥️ USB Cable For wired CarPlay connection option Product Highlights Wireless Apple CarPlay — no cable needed, connects automatically via Bluetooth Wired Apple CarPlay support also available for maximum stability Android Auto compatibility for all major Android smartphones Android screen mirroring for full device display on PCM3.1 Siri voice control for safe, hands-free operation while driving Original steering wheel and factory PCM buttons remain fully functional Front and reverse aftermarket camera support built in Airplay and Android mirror-linking for HD video streaming USB flash drive playback for offline music and video True plug-and-play installation — no permanent vehicle modifications Compatibility Model Years System Fitment Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Porsche Models with CD-AUX Button Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic trim tools, screwdrivers Confirm your Porsche's control panel has a NAVI button — this adapter requires PCM3.1 with NAVI functionality. If your vehicle has a CD-AUX button instead, this unit will not be compatible. Remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Disconnect the factory connectors carefully. Connect the included wiring harness to the rear of the factory PCM3.1 unit and to the adapter module — no wire cutting or permanent modification is required. Fit the dedicated microphone in a discreet location near the driver (sun visor or A-pillar area recommended) and route the cable tidily behind trim panels. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation — additional screws will be dispatched to ensure correct fitment. Refit the PCM3.1 unit and all trim panels. Power on the vehicle and pair your iPhone or Android device via Bluetooth to activate wireless CarPlay or Android Auto. Important: The factory microphone in PCM3.1-equipped Porsche models is integrated with the vehicle's SOS emergency system. This adapter includes a separate microphone to maintain hands-free calling functionality without disrupting the SOS system. Always use the supplied microphone. Upgrade Your Porsche's Connectivity Join over 12,300 satisfied customers who've transformed their driving experience with Victorious Automotive. Every order ships worldwide via DHL, FedEx, UPS or TNT — and is backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 🚚 Worldwide Shipping · DHL / FedEx / UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG, Apple Inc., or Google LLC. Apple CarPlay and Android Auto are trademarks of their respective owners. All product names and vehicle references are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase. Installation should be carried out by a qualified technician where appropriate.

Victorious Automotive · Porsche Panamera · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Panamera (2010–2016) – PCM 3.1 Bring full wireless Apple CarPlay and Android Auto to your 2010–2016 Porsche Panamera PCM 3.1 system — plug-and-play fitment, zero permanent modification. Porsche Panamera PCM 3.1 2010–2016 Wireless CarPlay Android Auto Plug & Play Siri Voice Control Reverse Camera Support Android Mirroring Aluminium Housing Overview The Porsche Panamera built between 2010 and 2016 came equipped with Porsche Communication Management 3.1 — a competent system for its era, but one that predates the smartphone integration that modern driving demands. If you've grown accustomed to using Apple Maps, Waze, Spotify, or hands-free calling through CarPlay in other vehicles, returning to PCM's native interface can feel like a step back. This wireless Apple CarPlay adapter is engineered specifically for the PCM 3.1 platform found across the 2010–2016 Panamera lineup. It connects directly into the existing architecture of your Porsche's infotainment system without replacing the head unit, preserving all OEM functionality while layering in full wireless CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. Your Porsche retains its factory look — there are no aftermarket screens, no cut wires, and no evidence of modification. The adapter communicates with your iPhone via Bluetooth for the initial pairing handshake, then switches automatically to a stable Wi-Fi connection for full wireless CarPlay performance. Steering wheel controls, the PCM NAVI button, and your original microphone circuit all remain functional — with a dedicated replacement microphone included to maintain hands-free call quality since the OEM unit shares circuitry with the SOS system. What's Included 📦 PCM 3.1 CarPlay Module Main adapter unit, aluminium housing, silver finish 🎙️ Replacement Microphone For hands-free calling, bypasses SOS-integrated OEM mic 🔌 Vehicle Harness Cable Direct-connect loom for PCM 3.1 interface 🔩 Mounting Hardware Includes additional screws for Sirius Satellite Radio-equipped vehicles 📄 Installation Guide Step-by-step printed instructions 💾 USB Flash Support Play offline media directly via USB input (up to 32GB) Product Highlights Wireless Apple CarPlay — connect via Bluetooth + Wi-Fi, no USB cable needed Wired Apple CarPlay also supported for maximum stability preference Android Auto compatibility for Google Maps, Assistant, and media apps Android screen mirroring for full phone display on PCM screen Original PCM steering wheel and dashboard button controls retained Siri voice control for safe, hands-free iPhone interaction Supports aftermarket front and reverse cameras via camera input AirPlay and Android Mirror-Link for HD video and music streaming USB Flash Drive playback for offline video and music without internet Plug-and-play installation — no permanent modification to OEM wiring Compatibility Model Year Range PCM Version Fitment Panamera 2010–2016 PCM 3.1 Direct Fit Cayenne 2010–2016 PCM 3.1 Direct Fit Macan 2010–2016 PCM 3.1 Direct Fit Cayman 2010–2016 PCM 3.1 Direct Fit Boxster 2010–2016 PCM 3.1 Direct Fit 911 / 991 2010–2016 PCM 3.1 Direct Fit 718 2010–2016 PCM 3.1 Direct Fit Any model with CD-AUX button (no NAVI) — Non-PCM 3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Confirm your Porsche PCM has a NAVI button on the control panel. If only a CD-AUX button is present, this adapter will not function — do not proceed. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation. We will include specific supplementary screws required for your configuration. Remove the PCM 3.1 head unit from the dash using appropriate trim removal tools — take care not to damage surrounding trim panels. Disconnect the OEM wiring harness from the rear of the PCM unit and connect the supplied adapter harness in-line between the PCM and the vehicle loom. Route and connect the replacement microphone to the adapter — do not reconnect the original OEM microphone, as it shares circuitry with the vehicle's SOS emergency system. Secure the CarPlay module in an accessible cavity behind the dash. Ensure no pinched cables before refitting the head unit. Refit the PCM unit, power up the vehicle, and follow the on-screen pairing instructions to connect your iPhone via Bluetooth for the initial wireless CarPlay setup. ⚠ Important: The original factory microphone must not be reused. It is integrated with the Porsche SOS emergency call system. The included replacement microphone provides equivalent call quality without interfering with safety systems. Driven by Detail. Built for Enthusiasts. At Victorious Automotive, every product we list is selected because it genuinely improves the ownership experience. If you have questions about fitment, PCM version, or installation for your specific Panamera, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop All In-Car Technology Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification. Apple CarPlay® is a registered trademark of Apple Inc. Android Auto™ is a trademark of Google LLC.

Premium Infotainment · Porsche PCM 3.1 · 2010–2016 Wireless Apple CarPlay for Porsche PCM 3.1 Transform your Porsche's factory infotainment with seamless wireless CarPlay and Android Auto integration. PCM 3.1 Compatible 2010–2016 Wireless + Wired Steering Wheel Control Camera Support Hands-Free Siri Overview Built for Porsche owners who demand connectivity without compromise. This wireless CarPlay system integrates directly into your PCM 3.1 head unit, replacing the factory interface while preserving all original controls and functionality. Simply connect your iPhone or Android phone via Bluetooth or USB, and instantly access Apple Maps, Spotify, Waze, Google Maps, and phone controls through the factory touchscreen and steering wheel buttons. No adaptation period. No compromises. This is the upgrade Porsche Cayenne, Macan, 911, Panamera, Boxster, and Cayman owners have been waiting for—modern smartphone integration that respects your car's design and your driving experience. What's Included 📱 Wireless CarPlay Module Plug-and-play integration 🎛️ Full Button Control OEM steering wheel integration 🎤 Dedicated Microphone For Siri and hands-free calls 📸 Camera Support Ready Rear/front/360 compatible 🔌 USB + Bluetooth + AUX Triple connection option 📖 Installation Manual Step-by-step guide included Key Features Wireless Apple CarPlay — Bluetooth pairing; no cable required Wired CarPlay Mode — USB connection for iOS devices Android Auto & Mirroring — Full Android platform support GPS Navigation — Google Maps, Waze, Apple Maps with live traffic Streaming Audio — Apple Music, Spotify, Amazon through factory speakers Siri Voice Control — Hands-free operation; "Hey Siri..." activation OEM Controls Intact — Steering wheel buttons and control knob fully functional Professional EQ — Adjustable equalizer (Pop, Rock, Soft, Standard presets) USB Media Playback — Direct music and video from external drives Factory Integration — Retains original PCM interface; press Home to return anytime Compatibility Porsche Model Year Range Status Cayenne 2010–2016 Direct Fit Macan 2010–2016 Direct Fit 911 / 991 2010–2016 Direct Fit Panamera 2010–2016 Direct Fit Boxster / Cayman / 718 2010–2016 Direct Fit Important: Before ordering, confirm your car has a "NAVI" button on the control panel. If your car has "CD-AUX" button instead, this system is not compatible. If you have Sirius Satellite Radio installed, contact us—we'll provide additional hardware. Installation Difficulty: Intermediate | Time: 45–60 minutes Power down your vehicle and disconnect the negative battery terminal (safety first). Remove the PCM 3.1 head unit from the dashboard using the provided removal keys or plastic pry tools. Disconnect the factory harness and locate the USB port connections behind the unit. Connect the wireless CarPlay module to the USB port and secure harness connections to the factory connectors. Reinstall the PCM unit into the dashboard and reconnect the battery terminal. Power on the system and perform the initial Bluetooth pairing with your smartphone. Test all functions: CarPlay, steering wheel controls, microphone, and factory buttons. Fine-tune EQ settings to your preference using the onscreen menu. Note: This system includes a dedicated microphone to maintain safety features. The original factory microphone cannot be reused due to integrated SOS emergency functionality. Full installation instructions are provided in the box. Ready to Upgrade Your Porsche? Say goodbye to dated infotainment. This wireless CarPlay system brings your PCM 3.1 into the modern era while preserving the authentic Porsche driving experience. Seamless integration. Full smartphone control. Your way. Add to Cart Use code 22GET20 for 20% off when ordering 2+ items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping — DHL, FedEx, UPS, TNT ✓ Expert support — +44 203 943 9919 Have questions? Call our team Mon–Fri, 9am–7pm GMT at +44 203 943 9919, or email support@victorious.shop. We're here to help you get the most out of your Porsche. Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Porsche AG, Porsche Cars North America, Inc., Jaguar Land Rover Limited, or their subsidiaries. All product names, logos, and brands are the property of their respective owners. Product fitment and compatibility are subject to individual vehicle specification and condition. We recommend professional installation. Victorious Automotive assumes no liability for installation errors or vehicle damage resulting from improper use or installation. Please verify vehicle specifications before purchase.