Best selling products

Victorious Automotive · Range Rover Sport L494 · Tail Lights Smoked LED Rear Tail Light Assembly – Range Rover Sport L494 (2014–2020) Facelift Style A smoked, 2018 facelift-style LED tail light upgrade that transforms the rear presence of your L494 Sport — sold as a direct-fit pair with no modification required. L494 2014–2020 Smoked Finish Full LED Facelift Style ABS + PC Sold as Pair 12V Aftermarket Direct Fit Overview The Range Rover Sport L494 is one of the most visually commanding SUVs on the road — and the rear light signature plays a defining role in that presence. Whether you're running a pre-facelift 2014–2017 Sport or a later model looking to refresh the aesthetic, these smoked LED tail lights deliver an instantly recognisable upgrade without compromising function. Styled to replicate the refined 2018 facelift rear light design, these units combine a blacked-out smoked lens with a full LED light cluster — bringing a darker, more purposeful look to the Sport's rear end. The ABS and polycarbonate construction ensures durability in all conditions, while the 12V LED technology guarantees crisp, bright output for indicators, brake lights, and running lights alike. For pre-facelift L494 owners (2014–2017), this is one of the most impactful visual upgrades available — effectively bringing your Sport's rear styling in line with the 2018+ facelift specification. For 2018–2020 models, these units serve as a direct-fit, smoked-lens alternative to the OE units. Both left and right units are included, with precision-fit housings designed around the original mounting points. What's Included 💡 Left Tail Light Unit Driver side — smoked LED assembly 💡 Right Tail Light Unit Passenger side — smoked LED assembly 🔌 Wiring Connectors OE-matching plug connectors pre-fitted 🔩 Mounting Hardware Fixings compatible with OE apertures Product Highlights 2018 facelift-style LED design for all L494 model years Smoked blacked-out lens for a stealth, aggressive rear aesthetic Full LED cluster — running, brake, and indicator functions Sold as a matched pair — left and right included ABS + polycarbonate construction for long-term durability Precision moulded to OE mounting points — no drilling required 12V compatible — plug-and-play with factory wiring harness CCC externally tested and certified Direct upgrade for pre-facelift 2014–2017 L494 models Aftermarket replacement option for 2018–2020 L494 models Compatibility Vehicle Model Code Year Range Fit Type Notes Range Rover Sport L494 2014–2017 Direct Fit Tuning upgrade to 2018 facelift style Range Rover Sport L494 2018–2020 Direct Fit OE replacement with smoked finish Range Rover Sport L461 2022–2026 Not Compatible Different platform and rear architecture Range Rover Vogue L405 2013–2021 Not Compatible Different vehicle model Range Rover Vogue L460 2022–2026 Not Compatible Different vehicle model Defender L663 2020–2026 Not Compatible Different vehicle model Installation Notes Difficulty: Beginner–Intermediate  |  Estimated Time: 30–60 Minutes  |  Tools Required: Basic Hand Tools Open the tailgate and locate the access panel or trim covering the tail light mounting area on each side. Remove the retaining nuts or bolts securing the original tail light unit — typically 2–3 fixings per side. Carefully pull the OE tail light assembly away from the body, taking care not to stress the wiring loom. Disconnect the OE wiring connector from the back of the original unit — note the orientation before removal. Connect the new smoked LED tail light unit to the factory wiring connector — it should click securely into place. Position the new unit against the body, aligning with the OE mounting points, and secure with the original fixings. Repeat for the opposite side, then test all light functions — running, brake, and indicator — before reassembling trim panels. Important: Always disconnect the vehicle battery before working with electrical components. If your vehicle is under warranty, consult your dealership before making modifications. Some 2014–2017 pre-facelift vehicles may require a resistor or coding adaptation to prevent indicator hyper-flash — test all functions before finalising installation. Upgrade Your L494 Sport's Rear Signature These smoked LED tail lights are one of the most impactful visual modifications available for the Range Rover Sport L494 — bringing facelift aesthetics and a darker, more purposeful stance to any model year. Explore more Sport L494 accessories at Victorious. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. This product is an aftermarket part and is not manufactured by or sourced from JLR.

Victorious Automotive · Defender L663 · Interior Trim Carbon Fiber Decorative Strip for Central Control Armrest — Land Rover Defender L663 (2020+) Real carbon fiber craftsmanship that upgrades the Defender's central armrest with a sharper, more purposeful aesthetic — no drilling, no fuss. Defender L663 2020–2026 Real Carbon Fiber Central Armrest Trim Direct Fit Adhesive Install Interior Upgrade Handmade Overview The Land Rover Defender L663 redefined what a modern off-road icon could look like — blending rugged utility with a genuinely refined interior. For owners who want to push that interior a step further, the details matter. The central control armrest sits front and centre in the cabin, and it's exactly the kind of surface that rewards a considered upgrade. This carbon fiber decorative strip is precision-developed for the 2020-onwards Defender L663, shaped to follow the exact contours of the central armrest panel. Crafted from genuine woven carbon fiber — not a printed film or a vinyl wrap — the strip delivers the authentic weave texture and depth that enthusiasts can instantly recognise. Each piece is handmade, with individual attention given to edge finishing and surface clarity. Installation requires no specialist tools and no modification to your vehicle. The strip bonds securely using automotive-grade adhesive tape that's been matched to the surface material of the Defender's armrest. The result is a seamless, factory-quality finish that looks like it was always meant to be there. What's Included 🪄 Carbon Fiber Armrest Strip 1× decorative strip for central control armrest, L663-specific fitment 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style backing tape, factory-applied to reverse side 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine woven carbon fiber — not a film, wrap, or printed surface Handmade construction with precision edge finishing throughout Engineered specifically for the Defender L663 central armrest geometry Automotive adhesive backing for a clean, tool-free installation Lightweight by nature — adds zero perceptible weight to the interior UV-stable clear coat protects weave pattern from fading or yellowing Complements both standard and upgraded Defender L663 interior trims Zero drilling, cutting, or vehicle modification required Residue-free removal possible with careful application of heat Ships worldwide — securely packaged to prevent transit damage Compatibility Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature. Cold conditions can reduce adhesive bonding strength significantly. Thoroughly clean the central armrest surface using an isopropyl alcohol wipe or a lint-free cloth dampened with IPA solution. Remove any dust, oils, or residue completely. Allow the cleaned surface to air dry for a minimum of 2–3 minutes before proceeding. Dry-fit the carbon fiber strip against the armrest without removing the adhesive backing, confirming alignment and position before committing. Peel the adhesive backing carefully from the reverse of the strip, avoiding contact with the exposed adhesive layer. Align the strip precisely with the armrest panel and press firmly from the centre outward, applying consistent pressure for 20–30 seconds across the full surface. Allow the adhesive to cure for a minimum of 24 hours before exposing the surface to heavy use, moisture, or direct sunlight. Important: Do not attempt installation in temperatures below 10°C or in direct sunlight. Applying the strip to a damp, oily, or dusty surface will significantly compromise adhesion and may cause premature lifting. If in doubt, clean the surface a second time before fitting. Complete Your Defender Interior This carbon fiber armrest strip is just one part of a wider range of Defender L663 interior upgrades available at Victorious Automotive. Browse the full Defender collection to find trims, covers, and accessories crafted to the same standard. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Range Rover Sport L494 Carbon Effect Side Vents – 2014–2017 Sharpen the side profile of your L494 Sport with precision-fit carbon effect side vents — a direct OEM-replacement upgrade that delivers genuine visual impact without modification. L494 2014–2017 Carbon Effect ABS Side Vents Pair Included Direct Replacement Exterior Styling Overview The Range Rover Sport L494 is one of the most purposeful SUVs ever produced — a vehicle that balances genuine off-road capability with athletic, road-focused intent. Its wide front flanks and sculpted bodywork make it a natural canvas for exterior upgrades, and the side vents are one of the most visible and character-defining elements of the front quarter panels. These carbon effect side vents are engineered specifically for the 2014–2017 Range Rover Sport L494. Crafted from high-quality ABS plastic with a carbon fibre-style finish, they slot directly into the factory vent apertures — no cutting, no drilling, no permanent modification required. The result is a more aggressive, motorsport-influenced aesthetic that feels entirely at home on the Sport's dynamic bodywork. Supplied as a matched pair — left and right — these vents offer a consistent, symmetrical upgrade across both sides of the vehicle. Whether you're refreshing tired factory trim or simply elevating the Sport's exterior presence, this is a clean, considered modification with a result that punches well above its price point. What's Included 🔲 Left Side Vent Carbon effect ABS — driver's side 🔲 Right Side Vent Carbon effect ABS — passenger's side Product Highlights Designed exclusively for Range Rover Sport L494 2014–2017 Carbon fibre-effect finish for a premium, motorsport aesthetic High-quality ABS construction — durable and lightweight Direct OEM-replacement fitment — no modification needed Supplied as a matched left and right pair Consistent finish across both sides of the vehicle Strict quality control standards applied at manufacture Enhances the Sport's aggressive front quarter styling Ideal for refreshing faded or damaged factory vents Professional installation recommended for best results Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014 – 2017 Direct Fit Range Rover Sport L494 2013 Verify Before Purchase Range Rover Sport L494 2018 – 2022 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Vogue L405 2013 – 2020 Not Compatible Range Rover Vogue L460 2022 – 2026 Not Compatible Range Rover Velar L560 2018 – 2022 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Trim removal tools, clean cloths Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work. Using a plastic trim removal tool, carefully pry the existing factory side vent away from the front quarter panel aperture, working around the retaining clips to avoid cracking the surrounding trim. Once the original vent is free, clean the aperture area thoroughly to remove any adhesive residue, dust, or debris. Align the new carbon effect vent into the aperture, ensuring all retaining tabs are correctly positioned before applying pressure. Press firmly and evenly around the perimeter of the vent until all clips engage and the vent sits flush with the surrounding bodywork. Repeat the process on the opposite side, checking that both vents sit symmetrically and flush before completing the installation. Please note: No instructions are included with this product. Professional installation is recommended. Victorious Automotive accepts no liability for damage caused during fitting. If you are unsure, consult a qualified automotive technician or bodywork specialist. Complete Your L494 Sport's Look Explore our full collection of exterior and interior upgrades designed specifically for the Range Rover Sport L494 — curated by enthusiasts, for enthusiasts. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender L663 110 Trunk Door Slot Decorative Panel — Stainless Steel (2020–2021) A precision-cut stainless steel trunk door slot trim that brings polished definition to your Defender 110's rear interior — installed in minutes, built to last. Defender L663 2020–2021 Stainless Steel Bright Finish Peel & Stick ISO9001 Certified Interior Trim Trunk Door Panel Overview The Defender L663 110 is one of the most talked-about vehicles of its generation — a vehicle that bridges genuine off-road capability with a surprisingly considered, upscale interior. Land Rover's 2020 relaunch of the Defender brought an entirely new platform and an interior ethos that rewards careful customisation. Every surface matters, and the smaller details — those that catch the eye as you open the tailgate or load the boot — are exactly where quality accessories earn their place. This trunk door slot decorative panel is designed specifically for the Defender 110 L663 (2020–2021). Crafted from polished stainless steel with a bright mirror-like finish, the panel sits neatly within the door slot recess at the rear of the vehicle, replacing the bare unpanelled gap with a clean, purposeful strip of trim. At 64cm long and precisely contoured to the factory profile, it slots into position without modification and adheres securely using pre-applied automotive-grade adhesive tape. Where plastic trim and unfinished edges can undermine an otherwise premium interior, this panel adds exactly the kind of subtle, considered detail that enthusiasts notice. The stainless steel construction resists corrosion, handles temperature extremes, and holds its finish over time — making this a long-term upgrade rather than a short-lived cosmetic fix. It's the sort of finishing touch that looks like it should have come from the factory. What's Included 🪟 Trunk Door Slot Decorative Panel 1x stainless steel trim panel, 64cm × 10cm × 4cm 🔖 Pre-Applied Adhesive Tape Automotive-grade 3M-style mounting tape pre-fitted to rear 📄 Installation Guide Step-by-step fitment instructions included in packaging Product Highlights Polished stainless steel construction — resistant to corrosion and daily wear Bright mirror finish that complements the Defender's premium interior aesthetic Precision-cut to 64cm to match the Defender 110 L663 trunk door profile exactly Pre-applied automotive adhesive tape for a clean, tool-free installation No drilling, cutting, or modification required to your vehicle Lightweight at 273g — no added stress to door structure or hinges ISO9001 quality certified manufacturing for consistent finish and fitment Designed to withstand temperature cycling, humidity, and loading bay use Enhances the appearance of the boot area when the tailgate is open Direct-fit for Defender 110 L663 2020–2021 — no adaptation needed Compatibility Model Code Year Range Fitment Defender 110 L663 2020–2021 Direct Fit Defender 90 L663 2020–2021 Not Compatible Defender 130 L663 2022–2026 Not Compatible Defender 110 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Open the Defender 110's tailgate fully and locate the trunk door slot recess where the panel will be fitted. Using a clean microfibre cloth and isopropyl alcohol (IPA), thoroughly clean and degrease the mounting surface. Remove any dust, oils, or residue. Allow to dry completely — at least 3–5 minutes. Test-fit the panel without removing the adhesive backing to confirm alignment and positioning along the slot recess. Peel away the adhesive tape backing from the rear of the decorative panel, taking care not to touch the adhesive surface. Starting from one end, carefully align the panel and press firmly into position along the door slot, applying consistent pressure across the full length for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before exposing to heavy moisture or loading the boot aggressively. ⚠ Important: Surface temperature should be between 15°C and 35°C during installation for optimal adhesive performance. Do not install on a cold or damp surface. Always verify your exact model and build year before fitting. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Defender's Interior Today Explore our full range of Defender L663 interior accessories — each one selected and tested to meet the standards your vehicle deserves. Worldwide shipping via DHL, FedEx, UPS, and TNT. Backed by our 30-day money-back guarantee. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or associated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fibre Seat Adjustment Frame Side Covers – Land Rover Defender 110 (2020–2021) A precision-fit interior upgrade that shields your Defender's seat adjustment frames from daily wear while delivering a sharp, purposeful carbon fibre aesthetic. Defender L663 2020–2021 ABS Carbon Fibre Seat Frame Covers Peel & Stick No Drilling Interior Trim Direct Fit Overview The Land Rover Defender 110 in its L663 generation brought a genuinely modern interior to a vehicle that had long traded on its raw mechanical character. For owners who have invested in that interior — whether in SE, S, X-Dynamic, or First Edition trim — maintaining the quality of every surface matters. The seat adjustment frame area, subject to constant contact from shoes, bags, and daily use, is one of the first places wear begins to show. These ABS carbon fibre seat adjustment frame side covers are engineered specifically for the 2020 and 2021 model year Defender 110. Each piece is formed from high-grade ABS and finished in a woven carbon fibre texture that reads as genuinely premium in person. They sit flush against the seat frame surround, covering the exposed base sections on both the driver and front passenger sides, protecting the original plastic from scuffs, scrapes, and UV fading without altering the seat's adjustability in any way. Installation requires no tools, no drilling, and no professional fitting — automotive-grade adhesive tape is pre-applied to the reverse of each cover, creating a bond that holds firmly through temperature variation and vibration. It's the kind of detail that Defender owners notice immediately, and that passengers simply assume was there from the factory. What's Included 🪑 Driver Side Cover Carbon fibre ABS, left-hand seat frame 🪑 Passenger Side Cover Carbon fibre ABS, right-hand seat frame 🔧 Pre-Applied Adhesive Automotive-grade tape, no tools required 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for the 2020–2021 Defender 110 seat frame geometry High-grade ABS construction with woven carbon fibre surface finish Protects original seat frame plastic from scuffs, scratches, and wear Pre-applied automotive adhesive tape for a clean, tool-free installation Does not impede seat adjustment levers, rails, or mechanisms Colour-consistent carbon texture that complements factory interior trim Resistant to temperature fluctuation and interior UV exposure Low-profile fit — no visible gaps, no lifting edges once bonded Covers both front seats — driver and passenger included as a pair Reversible installation — removable without damage to original surfaces Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🟢 Difficulty: Beginner Begin with both front seats fully accessible. Push each seat back to expose the lower frame surround and give yourself clear working space. Thoroughly clean the seat frame surface using an isopropyl alcohol wipe or equivalent. Remove all dust, grease, and residue — adhesion quality depends entirely on surface preparation. Allow the cleaned surface to dry completely for at least 2–3 minutes before proceeding. Test-fit each cover dry before removing the adhesive backing. Confirm alignment with the seat frame contours on both sides. Peel the protective film from the adhesive tape on the reverse of the cover. Align carefully and press firmly into position, applying sustained pressure across the full surface for 30–45 seconds. Repeat for the second cover on the opposite seat. Avoid adjusting the seat aggressively for at least one hour to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation in temperatures below 10°C / 50°F as cold conditions significantly reduce initial adhesive bond strength. If fitted in winter, allow additional curing time before use. Complete Your Defender Interior Explore our full range of Defender 110 L663 interior accessories — designed for owners who hold their vehicle to a higher standard. Shop Defender 110 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Silver Aluminium Speaker Cover Set for 2020 Land Rover Defender L663 A precision-cut set of eight aluminium alloy speaker covers engineered to integrate seamlessly into the 2020 Defender's interior — elevating the cabin's tone with a brushed silver finish that feels factory-intentional. Defender L663 2020 Aluminium Alloy Silver Finish Set of 8 Adhesive Fit Interior Trim ISO9001 Certified Overview The 2020 Land Rover Defender L663 marked a defining moment for the nameplate — a thoroughly modern reinterpretation of an icon, with a cabin that balances rugged utility and refined detail in equal measure. Owners who appreciate that balance understand that every surface inside the Defender tells a story, and the speaker grilles are no exception. Left in their standard finish, they can feel like a missed opportunity. Upgraded, they become a quiet statement of intent. This Silver Speaker Cover Set has been developed specifically for the 2020 Defender, with each of the eight pieces precision-cut from aircraft-grade aluminium alloy and finished in a cool brushed silver that complements the Defender's existing interior colour palette. The result is a cohesive, upscaled look that reads as premium without ever feeling overdone — the kind of upgrade that makes you notice it immediately on installation, then forget it was ever any other way. Installation requires no specialist tools and no permanent modification to the vehicle. Each cover arrives with pre-applied automotive-grade adhesive tape, allowing a clean, confident bond to the existing speaker surrounds in a matter of minutes. Whether you drive a daily Defender 90 or a weekend Defender 110, this set delivers a tangible interior improvement that punches well above its price point. What's Included 🔊 Speaker Covers × 8 Full set — front and rear positions covered 🔖 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant bond included on each piece 📋 Installation Guide Step-by-step instructions for a clean, confident fit 📦 Protective Packaging Each cover individually protected to prevent transit damage Product Highlights Designed exclusively for the 2020 Land Rover Defender L663 interior Brushed silver aluminium alloy — premium material, lasting finish Set of 8 covers for comprehensive interior coverage Pre-applied automotive adhesive — no drilling, no damage ISO9001 certified manufacturing for consistent quality Lightweight construction — no added bulk or vibration risk Corrosion-resistant finish suited to varied climates Refined silver tone complements both dark and light Defender cabins Direct-fit design — no trimming or modification required Reversible install — leaves no lasting marks on OEM trim Compatibility Model Code Year Range Fit Land Rover Defender 90 L663 2020 Direct Fit Land Rover Defender 110 L663 2020 Direct Fit Land Rover Defender 130 L663 2020 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry interior. Remove any dust or grease from the existing speaker surrounds using an isopropyl alcohol wipe — this is the single most important step for a lasting bond. Allow the cleaned surfaces to dry completely for at least 2–3 minutes before proceeding. Dry-fit each cover to its corresponding speaker surround to confirm position and orientation before committing to adhesion. Peel back the protective film from the pre-applied adhesive tape on the first cover, aligning it carefully with the speaker surround before pressing into place. Apply firm, even pressure across the full surface of each cover for 30–60 seconds to activate the adhesive bond. Repeat for all remaining covers, working systematically around the cabin. Allow the adhesive to fully cure for a minimum of 24 hours before exposing the covers to moisture or extreme temperatures. ⚠ Note: Avoid installation in temperatures below 10°C — cold surfaces significantly reduce the initial adhesive bond strength. If your Defender has been stored in a cold garage, allow the interior to warm up to ambient room temperature before fitting. Complete Your Defender's Interior This speaker cover set is just one piece of a wider interior transformation. Explore our full range of Defender L663 accessories — from dashboard trim to door handle covers — all curated specifically for the 2020 Defender. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, vehicle model names, and codes referenced are used solely for the purpose of fitment identification. Product model: LLK2816. Dimensions: 30cm (L) × 15cm (W) × 10cm (H). Weight: 300g. Certification: ISO9001.

BMW · X1 / X2 · Interior Trim Carbon Fiber Rear Air Conditioning Vent Frame Trim for BMW X1 F48 & X2 F47 Premium carbon fiber interior upgrade that transforms your rear climate vents with precision engineering and lasting style. BMW X1 F48 BMW X2 F47 2016–2019 Carbon Fiber Finish ABS Plastic Custom Fit Overview This carbon fiber rear air conditioning vent frame trim is engineered specifically for the BMW X1 F48 (2016–2019) and BMW X2 F47 (2018–2019). It delivers a seamless, factory-appearance upgrade that elevates your interior aesthetic while protecting your climate control components from dust and wear. Crafted from high-quality ABS plastic with an authentic carbon fiber finish, this trim piece features precision fitment that requires no modification to your vehicle. Installation is straightforward and non-invasive, making it ideal for owners who want a premium upgrade without dealer involvement. The sleek design complements modern BMW interiors and adds a sophisticated technical accent to your cabin. Perfect for enthusiasts seeking that premium, finished look. What's Included 📦 1x Rear Air Vent Frame Carbon fiber finish ABS trim piece 🔧 Adhesive Tape Automotive-grade pre-applied backing 📋 Installation Guide Step-by-step application instructions Product Highlights Premium ABS plastic with authentic carbon fiber weave finish Precision-engineered custom fit for seamless integration Direct replacement – no drilling or modification required Automotive-grade adhesive tape for permanent, clean installation Protects air vents from dust, debris, and interior wear Adds sophisticated technical accent to your cabin design Lightweight construction (200g) with zero performance impact UV-stable finish resists fading and discoloration Complements factory BMW styling and modern interiors Easy removal without damage if needed in future Compatibility Vehicle Model Year Range Fitment BMW X1 F48 2016–2019 Direct Fit BMW X2 F47 2018–2019 Direct Fit BMW X1 F49 (New Gen) 2023+ Not Compatible BMW X2 F45 2018–2023 Not Compatible Important: Verify your vehicle's exact generation and year before purchase. F48 and F47 models only. Check your VIN or dashboard for model code confirmation. Installation Difficulty Level: Beginner | Time: 10–15 minutes Prepare the surface: Clean the rear air vent frame thoroughly with a microfiber cloth and mild detergent. Ensure the area is completely dry and free of dust, oils, and residue for maximum adhesion. Position the trim: Carefully align the carbon fiber vent frame trim with the existing vent opening. Dry-fit first to confirm perfect positioning. Apply adhesive: Peel back the automotive-grade adhesive tape backing in small sections and press the trim firmly into place, working from the center outward to avoid air bubbles. Secure and cure: Hold firm pressure for 30 seconds, then allow the adhesive to cure for 24 hours before using climate controls or touching the trim. Final check: Inspect all edges for secure bonding and confirm the trim sits flush with your interior panels. Pro Tip: If your climate vents are warm or in direct sunlight, allow the vehicle to cool for 30 minutes before installation. This ensures optimal adhesive activation and prevents premature curing. Upgrade Your X1 & X2 Interior Today Transform your rear climate vents with premium carbon fiber styling. Engineered for precision fit, designed for lasting impact. Join thousands of BMW owners who trust Victorious for interior refinement. Add to Cart Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars – 12,300+ verified reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✅ 30-day money-back – No questions asked 📞 Expert support – +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke AG, or Jaguar Land Rover Limited. All product names, logos, and brands are the property of their respective owners. This product is designed for fitment to the specified vehicle models and is sold as an aftermarket upgrade only.

BMW · X1 F48 / X2 F47 · Interior Trim Aluminum Alloy Door Speaker Cover Trim for BMW X1 F48 & X2 Premium aluminum speaker covers that enhance your door panels with a modern, refined aesthetic while protecting your factory speakers. X1 F48 (2016–2019) X2 F47 (2018–2019) Aluminum Alloy Matte Finish Easy Install 4-Piece Set Overview If you own a BMW X1 F48 (2016–2019) or X2 F47, you already know that attention to detail separates a good interior from a great one. These Aluminum Alloy Door Speaker Cover Trims are engineered to elevate your cabin's visual presence while safeguarding your OEM audio components from dust and impact. Finished in a sophisticated matte aluminum, these covers integrate seamlessly with modern BMW interior design language. The clean lines and neutral tone complement factory trim, steering wheel buttons, and dashboard accents without looking like an afterthought. Whether your goal is subtle refinement or completing a wider interior refresh, these speaker trims deliver purposeful style. Installation is straightforward—double-sided adhesive tape does the heavy lifting, meaning no drilling, no wiring, and no trips to a BMW specialist. The adhesive bonds securely over 24 hours, providing long-term durability without damaging your original door panels. What's Included 📦 4x Speaker Cover Trims One pair (left/right) for each front door ✦ Double-Sided Adhesive Tape Pre-applied for hassle-free mounting 📋 Installation Guide Step-by-step instructions included 🔒 30-Day Guarantee Return or refund, no questions asked Highlights High-grade aluminum alloy construction for durability and premium feel Matte finish resists fingerprints and complements any interior color Engineered for precise fitment on X1 F48 and X2 F47 door panels Pre-applied double-sided adhesive—no tools or fasteners required Protects OEM speakers from dust accumulation and minor impacts Non-invasive installation preserves factory door panel integrity Achieves maximum adhesion within 24 hours of installation Lightweight design adds negligible weight to your vehicle Professional appearance suitable for show-winning cabin builds Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Year Range Fitment BMW X1 F48 2016–2019 Direct Fit BMW X2 F47 2018–2019 Direct Fit BMW 2 Series 218i Gran Tourer F46 2015–2018 Direct Fit All other BMW models Any year Not Compatible Always confirm your VIN and door panel design before ordering. Speaker cover dimensions vary between model generations. Contact us at +44 203 943 9919 if you're unsure of fitment. Installation Difficulty: Beginner | Time: 15 Minutes (per vehicle) Clean the door panel surface. Use a dry microfiber cloth to remove dust, fingerprints, and light oils from the speaker grille area. A mild IPA solution on a cloth works well for stubborn residue. Allow to dry completely. Position the cover trim. Carefully align the aluminum cover with the factory speaker opening. Ensure gaps are even on all sides and the cover sits flush against the door panel. Apply firm, even pressure. Once aligned, press down firmly across the entire trim for 10–15 seconds to activate the adhesive. Work from the center outward to avoid air bubbles. Allow curing time. Leave the vehicle undisturbed for 24 hours. The adhesive reaches maximum holding strength during this period—resist opening doors or applying pressure until fully cured. Repeat for all four doors. Follow steps 1–4 for the remaining three door speaker openings. Important: Do not operate window controls or allow passengers to lean against doors for at least 24 hours after installation. While the adhesive bonds quickly, full cure strength takes a full day. If your vehicle is parked in direct sunlight, cover the doors or park in shade to avoid heat-accelerated curing (which can cause uneven adhesion). Complete Your BMW Interior Precision engineering meets understated luxury. These speaker trims are the finishing touch that transforms a good cabin into one that turns heads. Order today and experience the Victorious Automotive difference. Shop Now Save 20% on any 2 items. Use code 22GET20 at checkout. ✓ 30-Day Guarantee ✓ 4.9/5 Stars · 12,300+ Reviews ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT ✓ Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent retailer and is not affiliated with BMW Group, Bayerische Motoren Werke AG, or any official BMW distributor. All product names, logos, and trademarks are the property of their respective owners. This product is designed for aftermarket fitment and customization purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Interior Trim Aluminum Alloy Dashboard Speaker Net Cover Sticker for Land Rover Defender 110 (2020) – Interior Modification A precision-engineered aluminum alloy speaker grille cover that elevates the Defender 110's dashboard with a refined, factory-quality finish — no drilling, no mess, no compromise. Defender L663 2020 Model Year Aluminum Alloy Peel & Stick Dashboard Trim Speaker Protection ISO9001 Certified Interior Mod Overview The 2020 Land Rover Defender 110 arrived as a modern reinterpretation of an icon — built tough but designed to impress. Its interior strikes a deliberate balance between utility and sophistication, and for owners who want to push that balance further, every detail matters. The dashboard speaker area, functional as it is, benefits enormously from a considered upgrade — and that's exactly where this cover steps in. Crafted from high-grade aluminum alloy and finished in a sleek matte black, this dashboard speaker net cover sticker is designed as a direct-fit solution for the 2020 Defender 110. It sits flush over the existing speaker grille, adding a layer of visual refinement and physical protection that feels entirely at home with the Defender's industrial-meets-premium aesthetic. The precision-cut net pattern mirrors the quality you'd expect from a factory-fitted accessory. Installation requires no tools and no specialist knowledge. The cover is backed with automotive-grade adhesive tape that bonds securely to the dashboard surface, creating a stable, rattle-free fit. It's the kind of upgrade that's subtle enough to look original, but significant enough that anyone who knows the Defender will notice — and appreciate — the difference. What's Included 🔲 Dashboard Speaker Net Cover 1× aluminum alloy sticker panel, matte black finish 🔗 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant bonding layer 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-engineered for a direct fit on the 2020 Defender 110 dashboard High-grade aluminum alloy construction — durable, lightweight, corrosion-resistant Sleek matte black finish complements all Defender interior colour schemes Automotive-grade peel-and-stick adhesive — no drilling or modification required Speaker net pattern provides physical protection without affecting sound quality ISO9001 certified manufacturing — consistent quality across every unit Rattle-free installation when applied to a clean, dry surface Heat and humidity resistant — built for real-world driving conditions Subtle, OEM-inspired aesthetic that doesn't disrupt the factory interior look Reversible modification — can be removed without damage to the dashboard surface Specifications Specification Detail Material Aluminum Alloy Finish Matte Black Dimensions 35cm (L) × 25cm (W) × 10cm (H) Weight 300g Fitment Type Peel & Stick – Automotive Adhesive Certification ISO9001 Application Dashboard Speaker Grille Cover Compatibility Vehicle Model Year Variant Fitment Land Rover Defender 110 2020 All Trim Levels (S, SE, HSE, X) Direct Fit Land Rover Defender 90 2020 All Variants Verify Before Purchase Land Rover Defender 110 2021–2024 All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 minutes  ·  🔧 Tools Required: None Begin with a clean workspace. Ensure your Defender is parked and the dashboard surface is at room temperature before you start. Using a microfibre cloth and isopropyl alcohol (IPA), thoroughly clean the speaker grille area on the dashboard. Remove any dust, oils, or residue and allow to dry completely — this is the most important step for long-term adhesion. Carefully peel away the protective backing from the adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface with your fingers. Align the cover precisely over the speaker grille, checking positioning before committing. The net pattern should sit centred and level with the surrounding dashboard trim. Apply firm, even pressure across the full surface of the cover for 30–60 seconds to activate the adhesive bond. Work from the centre outwards to avoid air pockets. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to moisture or extreme temperatures. ⚠ Important: Do not apply to a damp, dusty, or freshly cleaned surface that hasn't been allowed to dry fully. Avoid installation in temperatures below 10°C or above 35°C. If in doubt, professional fitting is recommended to ensure the best long-term result. Built for Defenders. Backed by Victorious. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium interior and exterior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is protected by our 30-day money-back guarantee. Shop All Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Automotive · Nissan Qashqai · Interior Lighting Interior LED Light Kit for Nissan Qashqai J10 J11 (2007–2020) Complete canbus LED lighting upgrade with 13 precision bulbs for dome, map, vanity, trunk, and licence plate lights—no error codes, plug-and-play installation. Qashqai J10 J11 2007–2020 Canbus Error-Free 13-Piece Kit Plug & Play 50,000 Hour Life Overview Transform your Qashqai's interior ambience with this comprehensive LED lighting kit, engineered specifically for J10 and J11 models spanning 2007 to 2020. Modern ownership demands that every detail—including cabin lighting—matches your vehicle's potential. This kit delivers 13 premium LED bulbs covering every critical interior lighting point: front and rear dome/map lights, vanity mirror lamps, trunk illumination, licence plate lighting, and backup spares. Each bulb is factory-engineered to integrate seamlessly with your Qashqai's onboard electronics, eliminating ECU errors and warning lights that often plague cheaper LED retrofits. The result is brighter, whiter, more modern cabin ambience with zero installation complexity. Turn off your lights, swap the old bulbs for new, and enjoy an immediate upgrade that makes every drive—day or night—more refined and functional. Superior heat management ensures longevity; your investment is backed by 50,000 hours of reliable operation. What's Included 💡 Front Dome/Map Lights 3 bulbs 💡 Rear Dome/Map Lights 2 bulbs (1 for sunroof models) 💄 Vanity Mirror Lights 4 bulbs (where fitted) 🚪 Trunk Light 1 bulb 📍 Licence Plate Lights 2 bulbs ⚡ Spare Bulbs 2 bulbs 🔧 Installation Tool Included Product Highlights 100% Canbus Error-Free — no ECU warnings or fault codes Super Bright Output — modern white tone, high lumen efficiency Direct Fit Design — drops into original sockets without modification Low Power Draw — reduces strain on vehicle battery and charging system Premium Heat Management — thermal-engineered for reliability in tropical and cold climates 50,000 Hour Lifespan — outlasts stock halogen and early LED alternatives Complete Coverage — 13 bulbs cover every interior and exterior light point Tool Included — plastic removal tool prevents damage to trim during installation Tested Compatibility — engineered for J10 (2007–2013) and J11 (2014–2020) platforms Money-Back Assurance — 30-day guarantee if you're not satisfied Compatibility Model Year Range Compatibility Nissan Qashqai J10 2007–2013 Direct Fit Nissan Qashqai J11 2014–2020 Direct Fit Nissan Qashqai +2 (J10) 2008–2014 Direct Fit Other Nissan/Non-Qashqai Any Not Compatible Note: Some models may lack vanity mirror lights in the original equipment. Select the correct trim type during checkout to ensure accurate kit contents. Installation Difficulty: Beginner | Time: 20–30 minutes Disconnect power: Switch off all cabin and exterior lights. Allow the vehicle to sit for 2–3 minutes to ensure bulbs are cool to touch. Remove trim (if needed): Using the supplied plastic tool, carefully prise dome light lens covers downward. Avoid twisting metal clips. Extract old bulbs: Gently twist the old halogen or incandescent bulb anticlockwise, then pull straight out of the socket. Insert LED bulb: Align the LED bulb with the socket and push straight in. Twist clockwise until seated firmly. Do not force. Secure metal clips: If the bulb feels slightly loose, carefully bend the metal retention clips closer together to grip the bulb housing tighter. Replace lens cover: Press the dome light cover back into place until it clicks. Ensure it sits flush with the headliner. Test all lights: Switch on ignition and activate each light circuit (dome, map, vanity, trunk, licence plate) to confirm operation. Verify no error codes: The canbus design eliminates ECU warnings, but a brief dashboard scan confirms no faults were triggered. Safety tip: Never touch halogen bulbs with bare skin. Natural oils cause premature failure and breakage. Always wear cotton gloves or use a clean cloth. Ready to Upgrade Your Qashqai's Interior? One kit. Thirteen bulbs. Complete cabin transformation. This is the simplest, most reliable way to modernise your Qashqai's interior lighting—and enjoy 50,000 hours of bright, error-free operation. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 – 12,300+ verified reviews 📞 +44 203 943 9919 – Mon–Fri 9am–7pm 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Nissan Motor Corporation, Renault Group, or any Land Rover and Range Rover entities. All vehicle names and badges are registered trademarks of their respective manufacturers. This product is an aftermarket accessory designed for fitment to compatible vehicles. Installation may void certain manufacturer warranties. Please consult your vehicle's manual or a qualified technician if unsure about compatibility or installation procedures.

Victorious · Volvo · Interior Lighting Canbus LED Interior Dome Reading Light Kit – Volvo V50–V90 Upgrade your entire cabin with error-free, ultra-bright LED bulbs engineered for Volvo's electrical architecture. Volvo Multi-Model 1996–2018 Canbus Compatible Plug & Play 50,000-Hour Lifespan Overview Volvo owners know their cars demand precision engineering and attention to detail. The interior of a V70, S60, XC90 or any Volvo in our lineup is a sanctuary—it should reflect the same build quality you expect under the bonnet. This Canbus LED Interior Dome Reading Light Kit transforms your cabin lighting while maintaining complete electrical harmony with your vehicle's OEM systems. Every bulb in this kit is engineered to eliminate the check-engine warnings that plague cheaper LED conversions. Unlike standard LED upgrades, our Canbus-compatible bulbs communicate seamlessly with your Volvo's onboard diagnostics, delivering no ECU errors, no flickering, no compromises. You get pure, white, daylight-quality illumination across front dome maps, rear reading lights, vanity mirrors, glove box, and cargo areas. With a 50,000-hour lifespan and minimal power draw, this is a permanent upgrade. Install once, enjoy for years. Whether you're restoring a classic S90 or modernising a 2018 V60, we've engineered a solution for your model year. What's Included 💡 Front Map/Dome LED Bulbs 2–4 pieces, depending on model 💡 Rear Dome Reading Lights 1–2 pieces for rear cabin 🪞 Vanity Mirror LEDs 2–4 pieces per model 📦 Glove Box & Trunk Lights Complete cargo area coverage 🔧 Installation Tools Removal clips and guides included Product Highlights 100% Canbus Error-Free – No ECU warnings or check-engine lights Ultra-Bright Daylight White – 6000K colour temperature for modern clarity Plug & Play Installation – Direct-fit original sockets; no modification required 50,000-Hour Lifespan – Outlasts multiple sets of halogen bulbs Low Power Draw – Reduces strain on battery and alternator Heat-Resistant Design – Engineered for extreme cabin temperatures Model-Specific Kits – Tailored bulb count and placement for your exact year/variant Premium Build Quality – High-grade LED emitters and driver circuitry Worldwide Shipping – DHL, FedEx, UPS, TNT to your door 30-Day Money-Back Guarantee – Zero-risk purchase promise Compatibility Guide Model & Year Range Kit Size Direct Fit Volvo C30 (2007–2013) 11 Pieces ✓ Direct Fit Volvo C70 Convertible (1998–2005) 8 Pieces ✓ Direct Fit Volvo C70 Convertible (2006–2013) 11 Pieces ✓ Direct Fit Volvo S60 (2000–2009) 13 Pieces ✓ Direct Fit Volvo S60 (2011–2018) 13 Pieces ✓ Direct Fit Volvo S70 (1998–2000) 6 Pieces ✓ Direct Fit Volvo S80 (1999–2006) 13 Pieces ✓ Direct Fit Volvo S80 (2007–2017) 13 Pieces ✓ Direct Fit Volvo S90 (1996–1998) 6 Pieces ✓ Direct Fit Volvo V50 (2004–2012) 12 Pieces ✓ Direct Fit Volvo V60 (2010–2018) 13 Pieces ✓ Direct Fit Volvo V70 (1996–2000) 10 Pieces ✓ Direct Fit Volvo V70 (2001–2007) 13 Pieces ✓ Direct Fit Volvo V70 (2008–2017) 12 Pieces ✓ Direct Fit Volvo V90 (1996–1998) 6 Pieces ✓ Direct Fit Volvo XC60 (2008–2018) 12 Pieces ✓ Direct Fit Volvo XC70 (2002–2007) 13 Pieces ✓ Direct Fit Volvo XC70 (2008–2017) 12 Pieces ✓ Direct Fit Volvo XC90 (2002–2011) 14 Pieces ✓ Direct Fit Volvo XC90 (2012–2014) 14 Pieces ✓ Direct Fit Installation Notes Difficulty: Beginner | Time: 30–45 minutes Turn off all interior lights and allow the vehicle to cool for 10 minutes. Halogen bulbs become extremely hot during operation. Locate the first light fixture (typically front dome or map light) and gently remove the lens or trim bezel if needed. Remove the old bulb by twisting counterclockwise or pressing inward, depending on the socket type. Handle with care. Insert the new LED bulb into the socket and secure by twisting clockwise or pressing fully until it clicks into place. Adjust the metal contact clips closer to the bulb (if applicable) to ensure a snug fit and eliminate any movement. Reinstall the lens or bezel and move on to the next fixture (rear dome, vanity mirrors, glove box, trunk). Turn on interior lights and verify all bulbs illuminate. If any bulb does not light, reseated it fully and try again. Clear any temporary error messages by driving for 10–15 minutes; the Canbus system will recalibrate automatically. ⚠ Safety First: Never install LED bulbs while lights are on or immediately after use. Hot halogen bulbs can cause severe burns. Wear light gloves if handling repeatedly. If you experience flickering after installation, ensure all clips are properly seated around the bulb base. Complete Your Interior Upgrade Transform your Volvo's cabin from dull to dazzling. Our Canbus LED kit is the upgrade your car's interior deserves—premium illumination, zero fuss, zero errors. Stock up on error-free lighting that works perfectly every time. Shop Volvo LED Kits Use code 22GET20 for 20% off any 2 items 📞 Expert Support: +44 203 943 9919 (Mon–Fri 9am–7pm) 🌍 Worldwide Shipping: DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee ⭐ 4.9/5 Stars: 12,300+ Verified Reviews Disclaimer: This product is not affiliated with, endorsed by, or connected to Volvo Car Corporation, Geely Holding, or Jaguar Land Rover. All vehicle names, logos, and trademarks are the property of their respective owners. This listing is for aftermarket accessory compatibility only. ```

Automotive · Skoda · Interior Lighting Interior LED Light Kit – Skoda Fabia MK1, MK2, MK3 (1999-2015+) Premium Canbus LED bulb set for Fabia dome, map, trunk and door lights with error-free installation and 50,000-hour lifespan. Skoda Fabia MK1 MK2 MK3 1999–2015+ Canbus Error-Free LED Overview The Skoda Fabia—from its 1999 debut through the current MK3 generation—deserves interior lighting that matches its clean, modern design. This comprehensive LED light kit transforms your cabin with bright, cool-white illumination across dome, map, trunk, door and glove box fixtures. Each bulb is engineered with full Canbus compatibility, eliminating the ECU errors and dashboard warnings that plague standard LED conversions. Installation takes minutes—everything is plug-and-play into original sockets. No wiring, no modifications, no regrets. With a certified 50,000-hour lifespan and robust thermal management, these bulbs deliver consistent brightness for the life of your Fabia. Whether you own a classic MK1 or the latest model year, we've included the exact bulb count your generation requires. What's Included 💡 Dome & Map Lights Front cabin illumination 🔦 Rear Cabin Lights Passenger area coverage 🚪 Door & Puddle Lights Entry lighting & ambience 📦 Trunk Light Boot visibility & load access 🧰 Installation Tool Safe bulb removal & fitting ⚡ Glove Box Light MK2 & MK3 models included Product Highlights 100% Canbus Compliant – Zero ECU errors, no dashboard warnings Super-Bright Output – Crisp white light, modern appearance Plug-and-Play Install – Direct fit into original sockets, no wiring 50,000-Hour Lifespan – Long-term reliability and value Advanced Thermal Design – Perfect heat resistance and durability Low Power Consumption – Minimal battery drain vs. halogen Generation-Specific Kits – MK1 (12pc), MK2 (13pc), MK3 (10pc) Premium LED Bulbs – High-quality electronics and optics Secure Fitting Clips – Adjustable metal pins prevent loose bulbs Complete Package – Everything needed; nothing extra to buy Compatibility & Kit Contents Generation Model Years Bulb Count Compatibility Fabia MK1 1999–2007 12 pieces Direct Fit Fabia MK2 2008–2014 13 pieces Direct Fit Fabia MK3 2015+ 10 pieces Direct Fit Installation Notes Difficulty Level: Beginner Estimated Time: 15–20 minutes Turn off all interior lights and allow bulbs to cool completely. Carefully remove the original halogen bulb from its socket—handle with care to avoid burns. Insert the new LED bulb into the socket until it clicks or seats fully. Gently adjust the metal pin clips to hold the bulb firmly in place, preventing any movement. Repeat for all dome, map, door, trunk, and glove box fixtures. Turn on lights and verify all fixtures illuminate correctly. Important: Always wait for the old bulbs to cool before removal. If a bulb feels loose after installation, carefully bend the retaining clips slightly inward to increase tension. Never force a bulb into place. Ready to Brighten Your Fabia? This premium LED interior kit gives your Skoda Fabia the modern, clean lighting it deserves—without compromise, complexity, or error codes. Direct fit, Canbus-safe, and backed by our 30-day guarantee. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars – 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Skoda, Volkswagen Group, or any official manufacturer. All product names and logos are trademarks of their respective owners, used only for identification and compatibility purposes. Vehicles and parts mentioned are sold for aftermarket accessory fitment only.

Audi · Interior · LED Lighting Canbus LED Interior Light Kit – Audi A3 A4 A5 A6 A7 A8 Q5 Q7 Error-free canbus LED interior lighting for all modern Audi models—superbright, plug-and-play, lifetime guaranteed. Canbus Compatible Error-Free LED Technology Easy Install 50,000h Lifespan The Kit That Transforms Your Audi's Interior Whether you drive an A3, A4, A5, A6, A7, A8, Q5, or Q7, the interior lighting sets the tone for the cabin experience. Factory dome lights are dim, yellowish, and feel dated. They're also the first thing passengers notice when you open a door or climb in for a night drive. This Canbus LED interior kit replaces every interior bulb—map lights, dome lights, vanity mirrors, trunk, and glove box—with premium white LEDs. Each bulb is engineered for direct compatibility with your Audi's factory wiring and CAN bus system. No error codes. No flickering. No ECU warnings. Just brilliant, modern illumination that transforms your cabin instantly. The kit includes everything you need and varies by model—from 9 pieces on newer A3 8V models to 20 pieces on the flagship Q7 4L. Installation takes less than an hour with basic tools, and the included metal clips ensure a perfect fit every time. What's Included in Your Kit 💡 Front Dome/Map Lights 3–4 pieces per model 💡 Rear Dome/Map Lights 2–5 pieces per model 🪞 Vanity Mirror Lights 2–4 pieces per model 🔦 Trunk/Cargo Lights 1–5 pieces per model 📦 Glove Box Light 1–2 pieces per model 🔧 Installation Tool Pry tool for safe removal Note: Exact quantities vary by model and generation. See the compatibility table below for your specific fitment. Why This Kit Works 100% Canbus Error-Free – Zero ECU warnings or dashboard alerts Super Bright & Modern – Clean white light, 50,000-hour lifespan Direct Fit Bulbs – Twist-in and festoon styles, both included where needed Plug-and-Play – No rewiring, no splicing, no modifications required Perfect Heat Resistance – Engineered for extended use in enclosed spaces Low Power Draw – Efficient LED technology saves your battery Pre-Tested – Each bulb verified before shipment Fits All Modern Audi Generations – A3 8L/8P/8V, A4 B5/B6/B7/B8, and more Includes Installation Guide – Step-by-step instructions with metal clips for security Premium Build Quality – Lifetime reliability backed by 4.9/5-star reviews Model-Specific Fitment & Package Contents Audi Model & Code Piece Count Compatibility A3 / S3 / RS3 (8L) 13 pieces Direct Fit A3 / S3 / RS3 (8P) 12 pieces Direct Fit A3 / S3 / RS3 (8V) 9 pieces Direct Fit A4 / S4 / RS4 (B5) 12 pieces Direct Fit A4 / S4 / RS4 (B6/B7) 12 pieces Direct Fit A4 / S4 / RS4 (B8) 12 pieces Direct Fit A5 / S5 / RS5 (8T) 12 pieces Direct Fit A6 / S6 / RS6 (C5) 14 pieces Direct Fit A6 / S6 / RS6 (C6) 12 pieces Direct Fit A6 / S6 / RS6 (C7) 11 pieces Direct Fit A7 / S7 / RS7 (4G) 10 pieces Direct Fit A8 / S8 (D2) 15 pieces Direct Fit A8 / S8 (D3) 14 pieces Direct Fit Q5 / SQ5 (All Generations) 14 pieces Direct Fit Q7 (4L) 20 pieces Direct Fit Important: Some models (notably A3 8P) include both twist-in and festoon-style bulbs to ensure compatibility with factory variations. Confirm your model code before purchase. Installation Notes Difficulty Level: Beginner Most owners complete this kit in 45–60 minutes. No electrical knowledge required. Power Off & Cool Down: Turn off all interior lights and allow 10 minutes for bulbs to cool completely. Locate Bulbs: Start with map lights (typically above seats) and work systematically through dome lights, vanity mirrors, trunk, and glove box. Remove Old Bulbs: Gently twist counterclockwise or pull straight out, depending on style. Be careful—they may still be warm. Install LED Bulbs: Insert the new LED bulb and twist clockwise (or push in for festoon-style). Test before moving to the next location. Secure Metal Clips: For festoon bulbs, slide the included metal clip closer to tighten the bulb in its socket and prevent looseness. Verify All Lights: Turn on all interior lights and verify that every bulb illuminates without flickering or error codes. ⚠ Safety Note: Do not force bulbs or clips. If a bulb is difficult to remove, gently warm the socket with a heat gun on low setting. If you encounter any error messages on the dashboard after installation, double-check that each bulb is fully seated in its socket. Ready to Brighten Your Audi's Interior? Premium canbus LED lighting is one of the most noticeable interior upgrades you can make—and the easiest to install yourself. Transform your cabin from tired to modern in under an hour. Select Your Audi Model Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars – 12,300+ verified reviews 🚗 Ships Worldwide – DHL, FedEx, UPS, TNT ✅ 30-Day Guarantee – Money-back guarantee 📞 Expert Support – Mon–Fri, 9am–7pm GMT Disclaimer: This product is not affiliated with Audi AG, Volkswagen Group, or their subsidiaries. Audi is a registered trademark of its respective owner. This kit is designed as an aftermarket accessory and does not carry any original manufacturer warranty. Always verify your specific model and generation before purchase. If in doubt, contact our team at +44 203 943 9919.

Victorious · Universal · Vinyl Wraps 3D Carbon Fiber Vinyl Wrap – 500mm × 2000mm | Waterproof Adhesive Film for Cars, Motorcycles & DIY Premium carbon fiber vinyl with UV protection and heat-stretchable adhesive — delivers authentic texture and durability for any smooth surface. Universal Fit 500mm × 2000mm 3D Carbon Texture Waterproof Adhesive Heat Stretchable UV Protected Overview Whether you're upgrading a Range Rover Sport, Defender 110, Discovery, or any premium automotive, this 3D carbon fiber vinyl wrap delivers professional-grade aesthetics with genuine protection. The 500mm × 2000mm format provides ample coverage for trim pieces, accent panels, roof spoilers, door handles, mirror caps, and bespoke design applications across your vehicle's exterior. This waterproof vinyl film features an ultra-smooth surface with authentic carbon weave texture and premium pressure-sensitive adhesive that bonds cleanly to any flat or moderately curved surface—no residue, no damage to original paintwork. Heat activation makes installation forgiving: simply warm the vinyl with a heat gun to increase pliability and eliminate wrinkles, then secure with a soft squeegee. Built for longevity, the coating resists water, salt spray, road grime, UV radiation, and mild acids. Clean with soap and water; peel away whenever you choose without harming your vehicle's finish. Ideal for automotive detailing, motorcycle customization, laptops, mobile devices, and creative projects—professional results every time. What's Included 🎬 3D Carbon Fiber Vinyl Roll 500mm (W) × 2000mm (L) premium film with adhesive backing ✨ Authentic Carbon Weave Texture Realistic raised grain for premium visual depth 🛡️ UV Protective Coating Blocks harmful rays; prevents fading and color shift 💧 Waterproof Adhesive Resists water, salt, dirt, grease, oil—easy water rinse cleanup Product Highlights Extremely smooth, high-gloss surface with authentic 3D carbon texture Heat-stretchable for installation on curves and contoured panels Premium pressure-sensitive adhesive bonds instantly—no heat gun required UV protective layer extends lifespan in direct sunlight conditions Waterproof and resistant to salt spray, dirt, grease, mild acid, and oil Residue-free removal—no damage to original paint or clear coat Simple water-based cleaning—no harsh chemicals needed Versatile: cars, motorcycles, laptops, mobile devices, home décor Professional-grade material for DIY and commercial applications 500mm × 2000mm format covers multiple trim pieces or large accent areas Installation Notes Difficulty Level: Beginner–Intermediate | Time: 15–45 min Prepare Surface: Clean the target area thoroughly with rubbing alcohol or isopropyl cleaner. Remove all dirt, dust, grease, and contaminants to ensure strong adhesion and prevent imperfections. Measure & Cut: Measure your panel and cut vinyl to size with a sharp blade or utility knife. Leave 1–2mm margin for safety; trim carefully to avoid damage. Peel & Position: Carefully peel back a corner of the backing and align the vinyl on your surface. Work slowly to avoid trapping air bubbles. Heat & Stretch (Optional): Use a heat gun (300–350°F) at a 6-inch distance to warm the vinyl. This increases flexibility, helps it conform to curves, and aids in bubble removal. Smooth & Secure: Use a soft rubber squeegee to press the vinyl flat, working from the center outward. Apply firm, even pressure to eliminate wrinkles and bubbles. Final Trim: Once fully adhered, use a sharp blade to trim excess vinyl along panel edges. Allow 24 hours before heavy use or water exposure. ⚠️ Pro Tip: Always use a heat gun on low-to-medium settings. Excessive heat may damage the adhesive or the vinyl. Test on a small, inconspicuous area first. Do not install on uneven, textured, or damaged surfaces—optimal adhesion requires smooth, clean finishes. Compatibility Application Compatibility Range Rover Sport (All Models) Direct Fit Range Rover Vogue (All Models) Direct Fit Defender 110 / 90 (2020–2026) Direct Fit Discovery 3 / 4 / 5 Direct Fit Range Rover Evoque (All Models) Direct Fit Motorcycles (Fairings, Tanks, Panels) Direct Fit Laptops, Phones, Home Décor Direct Fit Textured or Uneven Surfaces Not Compatible Elevate Your Vehicle's Aesthetic Transform your Land Rover, Range Rover, Defender, motorcycle, or cherished device with premium 3D carbon fiber vinyl. Waterproof, UV-protected, and residue-free—professional results without the dealership cost. Use code 22GET20 for 20% off any 2 items. Shop Now 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All trademarks, logos, and brand names are the property of their respective owners. Product descriptions and fitment information are provided for reference only; always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fiber Seat Back USB Port Panel Frame for Land Rover Defender 110 (2020–2026) L663 A precision-fit carbon fibre panel overlay that brings a sharper, more customised presence to the Defender 110's rear seat USB port surrounds — no drilling, no compromise. Defender L663 2020–2026 ABS Carbon Fibre Direct Fit Interior Trim USB Port Panel Seat Back Adhesive Install No Drilling Overview The Land Rover Defender 110 L663 redefined what a modern off-road icon could look like — and owners who've invested in one know that every detail matters. The interior, while thoughtfully designed from the factory, offers genuine scope for personalisation, particularly in areas like the rear seat panel surrounds where OEM plastics can look understated relative to the rest of the cabin's character. This seat back USB port panel frame is engineered specifically for the 2020-onward Defender 110 L663. Constructed from high-grade ABS with a precision-applied carbon fibre finish, it overlays the existing USB port surround panels on the rear seat backs with a clean, textured look that adds depth and visual contrast. The result is a subtle but immediately noticeable upgrade — exactly the kind of refinement that discerning Defender owners appreciate. Fitment is handled through pre-applied automotive-grade adhesive tape, meaning the installation process is clean, reversible if needed, and requires no specialist tools. Whether you're building out a fully kitted interior or simply adding considered finishing touches, this panel is a low-effort, high-impact addition to your L663's cabin. What's Included 🪑 Seat Back USB Panel Frame × 2 Carbon fibre finish ABS overlays, one per seat back position 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape, factory-applied to each panel 📋 Installation Guidance Basic fitting instructions included with each order Product Highlights Precision-engineered to fit the Defender 110 L663 seat back USB port surround exactly High-quality ABS substrate with durable carbon fibre texture finish Lightweight construction — adds zero meaningful weight to the interior Pre-applied automotive adhesive tape for a clean, tool-free installation Retains full access and functionality of the USB ports beneath Resistant to UV fading and everyday interior wear and abrasion Adds visual contrast and a premium carbon accent to the rear cabin No permanent modification — fully reversible installation method Ships as a matched pair for left and right seat back positions Compatible across all trim levels of the 2020–2026 Defender 110 L663 Compatibility Model Code Year Range Trim Level Fitment Defender 110 L663 2020–2026 Standard / S / SE Direct Fit Defender 110 L663 2020–2026 HSE / X / X-Dynamic Direct Fit Defender 110 L663 2020–2026 First Edition / 75th Anniversary Direct Fit Defender 90 L663 2020–2026 All Trims Verify Before Purchase Defender 130 L663 2022–2026 All Trims Verify Before Purchase Range Rover Sport L461 / L494 All Years All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle parked and the interior at or above room temperature — cold surfaces can reduce adhesive bond strength significantly. Fold the rear seat forward or gain clear access to the seat back USB port panels you intend to trim. Using a clean microfibre cloth and isopropyl alcohol (IPA), thoroughly clean the plastic surface around the USB port surrounds. Remove any dust, oils, or residue and allow to dry completely for at least 2–3 minutes. Dry-fit each panel frame against the USB port surround to confirm alignment and orientation before committing. Note the correct position carefully. Peel the protective backing from the pre-applied adhesive tape on the first panel frame. Align the panel carefully over the USB port surround and press firmly into place, applying even pressure across the full surface for 30–60 seconds. Repeat for the second panel frame on the opposing seat back. Allow a minimum of 24 hours before exposing the panels to sustained pressure or cleaning products to allow the adhesive to fully cure. ⚠ Important: Do not attempt installation on a cold or damp surface. Adhesive performance is significantly reduced below 15°C (59°F). If removing panels in future, use a plastic trim pry tool and apply gentle heat with a heat gun or hairdryer to release the adhesive without marking the underlying trim. Complete Your Defender 110 Interior Browse our full range of precision-fit interior accessories designed exclusively for the Defender L663 — from dashboard trim overlays to door panel accents and centre console upgrades. Shop Defender L663 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Defender L663 · Interior Protection ABS Carbon Fiber Rear Armrest Box Anti-Kick Cover for Land Rover Defender 110 & 130 (2020+) A precision-formed ABS carbon fibre kick cover that guards the rear armrest box of your Defender L663 against everyday scuffs, scratches, and heel damage — with a factory-finish aesthetic that looks entirely at home. Defender L663 2020–2026 High-Quality ABS Carbon Fibre Finish Anti-Kick Protection No-Drill Install Rear Armrest Box Model: XYL1446 Overview The Land Rover Defender 110 and 130 (L663, 2020 onwards) represents an entirely new chapter for one of the most iconic vehicles ever made — and its interior reflects that ambition. Clean lines, purposeful surfaces, and a level of refinement that earlier Defenders never offered. Protecting those surfaces from the inevitable wear of daily life is where this rear armrest box anti-kick cover comes in. Engineered specifically for the rear centre armrest box panel area of the L663 Defender, this cover wraps the lower section in a durable, high-quality ABS shell finished in a striking carbon fibre texture. This is the zone that takes the most punishment from rear passengers — boots, bags, and casual contact all take their toll. Without protection, scuffs and scratches accumulate quickly and are disproportionately noticeable on an otherwise clean interior. The fit is precise and purposeful. Using automotive-grade adhesive tape, this cover applies cleanly without drilling, cutting, or any modification to the vehicle's original trim. The carbon fibre finish integrates naturally with the Defender's utilitarian-premium aesthetic, adding a layer of visual intent without looking out of place. A small upgrade with a quietly significant impact on the long-term condition of your interior. What's Included 🛡️ Anti-Kick Cover 1 × ABS carbon fibre rear armrest box protection panel 🔧 Adhesive Tape Pre-applied automotive-grade 3M-style mounting tape 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Designed exclusively for the Defender L663 110 & 130 (2020+) Premium ABS construction — rigid, lightweight, and durable Carbon fibre texture finish for a refined, sporty aesthetic Guards against scuffs, heel strikes, and surface scratches No-drill, no-modification installation — fully reversible Automotive-grade adhesive tape pre-applied for clean fitment Exact dimensions: 34cm (L) × 30cm (W) × 6cm (H) Lightweight at just 366g — no impact on vehicle dynamics Complements factory trim without looking aftermarket Maintains original panel access and armrest functionality Compatibility Vehicle Code Year Range Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Defender (Original) Pre-2016 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin by thoroughly cleaning the rear armrest box panel surface using an isopropyl alcohol wipe. Remove all dust, grease, and moisture, and allow to dry completely before proceeding. Offer the cover up to the panel to confirm alignment and fitment before removing any adhesive backing. Note the orientation and any contour points. Peel back a small section of the adhesive backing to expose the tape. Carefully position the cover from one edge, pressing firmly as you work across the surface to avoid air pockets. Once fully seated, apply firm and even pressure across the entire cover for 30–60 seconds to ensure maximum adhesive contact with the panel surface. Allow at least 72 hours before subjecting the cover to heavy use or pressure, giving the adhesive bond time to fully cure. Note: Do not apply in temperatures below 10°C — cold surfaces significantly reduce adhesive performance. Ensure the vehicle has been at room temperature for at least one hour before fitting. If your vehicle has been recently detailed or treated with a silicone-based product, clean the surface thoroughly before installation. Complete Your Defender's Interior Browse our full collection of Defender L663 interior accessories — from carbon fibre trims and armrest covers to dashboard overlays and door panel protectors. Every piece is selected to complement the Defender's character without compromising it. Shop Defender L663 Interior → 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or an authorised dealer of Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Defender L663 · Interior Organisation Defender 2020 Rear Trunk Storage Net – Cargo Organisation for L663 110 & 130 A precision-fit rear boot storage net for the Land Rover Defender L663, engineered to keep your cargo controlled, secure, and exactly where you left it. Defender L663 2020–2026 110 & 130 High-Duty Cloth Net ISO9001 Certified Adhesive Fit Black Model: XYL1446 17g Interior Moulding Overview The Land Rover Defender L663 was designed with purpose-led adventure at its core — and its boot space reflects that ambition. Whether you're loading kit for a weekend trail run, a long-distance touring expedition, or daily urban duty, the Defender's rear cargo area demands the same level of organisation that the rest of the cabin delivers. Loose items sliding across the boot floor aren't just frustrating — they're a distraction, and in a vehicle capable of this kind of terrain, that's worth addressing properly. This rear trunk storage net is purpose-designed for the Defender 110 and 130 L663 (2020 onward), fitting flush against the interior boot panelling to create an immediately accessible, low-profile storage pocket. Made from high-quality, durable cloth with a tight-weave construction, it holds soft bags, charging cables, emergency gear, maps, water bottles, and all the small-but-essential items that typically end up loose in the boot. The mounting solution uses automotive-grade adhesive tape — no drilling, no modification, no trace left behind if you ever choose to remove it. Certified to ISO9001 quality standards, this is not a generic aftermarket product. It is a considered interior addition built to the kind of specification that Defender owners expect — understated in black, complementary to the existing trim, and functional in every environment the L663 is designed to handle. What's Included 🪢 Rear Storage Net (×1) High-duty cloth net, black — model XYL1446 🔲 Adhesive Mounting Tape Automotive-grade — pre-applied for direct fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Custom-fit for Defender L663 110 and 130 boot configurations ISO9001 certified manufacturing for consistent quality assurance Durable high-duty cloth construction — resists stretch and sagging Tool-free installation using automotive-grade adhesive tape Discreet black finish complements factory Defender interior trim Lightweight at just 17g — no impact on boot load capacity Keeps loose items contained and accessible during off-road use Leaves no permanent marks — fully reversible if removed Ideal for cables, bags, maps, emergency kit, and travel essentials Low-profile design — does not impede boot access or loading Compatibility Vehicle Code Year Range Variant Fitment Land Rover Defender 110 L663 2020–2026 All trim levels Direct Fit Land Rover Defender 130 L663 2020–2026 All trim levels Direct Fit Land Rover Defender 90 L663 2020–2026 All trim levels Not Confirmed Range Rover Sport L494 L494 2013–2022 All variants Not Compatible Range Rover Vogue L405 L405 2013–2021 All variants Not Compatible Range Rover Velar L560 2018–2022 All variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Open the Defender's rear boot and identify the intended mounting surface on the boot interior panel — typically the side panel or rear quarter trim. Thoroughly clean the mounting surface with a dry, lint-free cloth to remove any dust, moisture, or residue. Allow to dry completely before proceeding. Peel the protective backing from the pre-applied automotive adhesive tape on the rear of the storage net mounting bracket. Press the net firmly against the cleaned surface, applying steady pressure for 30–60 seconds to ensure full adhesion contact. Allow the adhesive to cure for a minimum of 24 hours before placing any load in the net. Avoid exposure to moisture or direct heat during this period. Important: Do not install on surfaces that are damp, greasy, or freshly cleaned with chemical agents. Adhesion strength is significantly reduced on textured or porous surfaces. In cold conditions, allow the vehicle interior to warm before fitting. Incorrect surface preparation is the most common cause of fitment failure. Complete Your Defender's Interior The Defender L663 deserves more than just a tidy boot. Explore the full range of Victorious interior accessories — from boot liners and seat organisers to dash trim and cable management — built specifically for your vehicle. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Exterior Trim Land Rover Defender 110 Rear Bumper Plate Cover Trim Stickers — ABS Black, L663 2020+ A precision-formed ABS rear bumper plate cover that reinforces the Defender 110's bold exterior stance with a factory-matched black finish and a hassle-free adhesive installation. Defender 110 L663 2020–2026 ABS Black Rear Bumper Exterior Trim Adhesive Fit ISO9001 Certified Model LLK2841 Overview The Land Rover Defender 110 L663 is a vehicle built to make a statement — utilitarian, purposeful, and unmistakably bold. Every surface detail contributes to its commanding road presence, and the rear bumper area is no exception. Whether you're running a daily commute or heading off-road, the rear end of your Defender deserves the same attention to detail as the rest of the build. This Rear Bumper Plate Cover Trim is designed specifically for the 2020-onwards Defender 110 L663, engineered to sit flush against the bumper's lower plate section with no drilling or cutting required. Formed from high-grade ABS plastic and finished in a deep satin black, it integrates seamlessly with the Defender's existing exterior aesthetic — whether your vehicle is in Santorini Black, Carpathian Grey, or any other factory colour. The fitment uses purpose-selected automotive-grade adhesive tape, the same technology used in OEM trim applications across the industry. The result is a clean, rattle-free attachment that holds firmly through temperature extremes, road wash, and the kind of conditions a Defender genuinely encounters. It's a subtle upgrade that looks like it was always there. What's Included 🛡️ Rear Bumper Plate Cover Trim 1x ABS Black trim panel, model LLK2841 🔧 Adhesive Mounting Tape Pre-cut automotive-grade tape included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed for the 2020+ Defender 110 L663 bumper profile High-grade ABS construction — impact-resistant and lightweight Deep satin black finish complements all factory Defender colours ISO9001 certified manufacturing for consistent quality control No drilling, no cutting — clean adhesive-only installation Automotive-grade tape included; pre-cut for exact panel fitment Resistant to UV fading, water ingress, and road debris Rattle-free bond once cured — flush sit against bumper surface Dimensions: 79cm L × 20cm W × 10cm H | Weight: 300g Direct replacement aesthetic — looks factory-fitted from day one Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Defender 110 (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🛠 Tools Required: None Park the Defender 110 on a level surface and allow the bumper to cool to ambient temperature before starting — avoid installation in direct sunlight or below 10°C for best adhesive performance. Thoroughly clean the rear bumper plate surface using an isopropyl alcohol wipe or panel wipe solution, removing all road film, wax, and grease. Allow to dry completely before proceeding. Dry-fit the ABS trim cover against the bumper surface to confirm alignment and panel seating before committing the adhesive. The trim should sit flush with no raised edges. Peel the protective backing from the pre-cut adhesive tape strips. Position the trim carefully, starting from the centre and working outward to avoid air pockets. Apply firm, even hand pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Pay particular attention to corners and edges. Allow the adhesive to cure for a minimum of 24 hours before subjecting the vehicle to rain, washing, or high-speed motorway driving. ⚠ Note: Do not attempt to reposition the trim once the adhesive tape has made full contact with the bumper surface. Adhesive effectiveness is significantly reduced if the trim is removed and re-applied. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Complete Your Defender's Exterior This bumper trim is just the beginning. Explore the full range of Defender 110 L663 exterior accessories at Victorious Automotive — curated specifically for owners who hold their vehicles to the same standard we do. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L320 · Fog Lamp Covers Primed Front Fog Lamp Hood Covers – Range Rover Sport L320 (2005–2009) | Left & Right Pair OE-matched primed PP fog light bezels for the first-generation Range Rover Sport — precision-moulded to restore factory fitment and front-end protection on your L320. Range Rover Sport L320 2005–2009 Part No. DXB000221LML Part No. DXB000231LML Primed PP Plastic Direct Fit Left & Right New Condition RALUX Overview The first-generation Range Rover Sport (L320, 2005–2009) established itself as one of the most dynamic and desirable SUVs of its era — a vehicle that rewarded owners who took pride in keeping every detail exactly right. The front fog lamp bezels sit prominently in the lower bumper and are among the first components to show the wear of road use, stone chips, or minor parking incidents. A cracked, discoloured, or missing fog lamp hood immediately undermines the Sport's composed, purposeful stance. These replacement fog lamp hood covers — part numbers DXB000221LML (right) and DXB000231LML (left) — are precision-moulded from high-density polypropylene (PP) to replicate the exact geometry of the original OE units. Supplied in a paint-ready primed finish, they accept standard automotive body paint directly, allowing you to blend them seamlessly with your existing bumper colour for a factory-quality result. Offered as a left and right set, this listing ensures your Sport gets a symmetrical, matched restoration in a single order. Whether you're addressing accident damage, UV degradation, or simply refreshing an ageing front end, these bezels deliver the kind of precise fit and finish that a vehicle of this calibre demands — without the dealership price tag. What's Included 🔦 Right Fog Lamp Hood Part No. DXB000221LML — driver-side bezel, primed finish 🔦 Left Fog Lamp Hood Part No. DXB000231LML — passenger-side bezel, primed finish 📋 Fitment Reference Vehicle application guide included with shipment Product Highlights Precision-moulded PP construction mirrors OE part geometry exactly Paint-ready primed surface — compatible with all standard automotive body paints Complete left and right pair for a fully matched front-end restoration New condition — not refurbished or reconditioned Designed specifically for Range Rover Sport L320 lower bumper apertures Lightweight at 0.5 kg — no impact on vehicle dynamics or front-end balance Fog light protection function retained — correctly houses and shields fog lamp assembly Direct OE replacement — no cutting, drilling, or modification required Dimensions: approx. 13" (L) × 12" (W) × 12" (H) — matches original bumper recess profile Supplied by RALUX, a trusted supplier of Land Rover body restoration components Compatibility Vehicle Code Year Range Fitment Range Rover Sport L320 2005–2009 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: ⭐⭐☆☆☆  |  Estimated Time: 30–60 minutes  |  Professional paint recommended Before fitting, prepare the primed surface by lightly sanding with 400-grit wet-and-dry paper to ensure a smooth, even base for paint adhesion. Apply a compatible automotive primer sealer coat if required by your chosen topcoat system, then paint to match your bumper colour. Allow full cure time per paint manufacturer's instructions before handling. With the vehicle on a flat surface, carefully remove the front bumper lower trim or access panel to reach the existing fog lamp bezel mounting points (refer to your workshop manual for L320-specific fastener locations). Unclip or unscrew the damaged fog lamp hood from the bumper aperture, disconnecting any retaining tabs carefully to avoid cracking the surrounding bumper material. Align the new fog lamp hood into the bumper aperture, ensuring all locating tabs and clip positions are correctly seated before applying pressure to secure. Refit any removed trim panels and fasteners. Verify the fog lamp lens is correctly seated and fully protected within the new bezel before completing reassembly. ⚠ Note: These covers are supplied primed and unpainted. Professional painting prior to fitting is strongly recommended to achieve a factory-quality finish. Ensure paint is fully cured before installation to prevent damage to the new surface during handling. Restore Your Sport's Front End — The Right Way At Victorious Automotive, we stock the parts that Range Rover owners actually need — precisely specced, properly described, and dispatched worldwide. Your L320 deserves better than a poorly fitting aftermarket part. Shop Range Rover Sport Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Part numbers are cited for reference only.

Victorious Automotive · Defender L663 · Exterior Accessories Foldable Liftable Stainless Steel Roof Ladder – Land Rover Defender L663 (2020–2026) A precision-engineered, corrosion-resistant roof ladder purpose-built for the Defender L663 — making roof rack access effortless without compromising the vehicle's commanding exterior. Defender L663 2020–2026 Stainless Steel Foldable Design Quick-Release CE Certified Rustproof Left Placement Exterior Upgrade Overview The Land Rover Defender L663 was reborn as a vehicle that blends authentic off-road capability with a modern, purposeful design language. Whether you're loading gear onto a rooftop tent platform, accessing a roof rack, or navigating demanding terrain with expedition-grade kit, seamless roof access is not just convenient — it's essential. The Defender's high roofline demands a solution that's both robust and thoughtfully integrated. This Foldable Liftable Stainless Steel Roof Ladder is designed exclusively for the 2020–2026 Defender L663. Fabricated from premium-grade stainless steel, it offers a direct-fit installation on the left-hand side of the vehicle, aligning cleanly with the Defender's body profile. The foldable and liftable mechanism means the ladder tucks away when not in use, preserving both aesthetics and departure clearance on the trail. The quick-release system ensures the ladder can be deployed and stowed without tools, making it an ideal companion for real-world adventure use. CE certified and built to resist corrosion across all climates — from coastal salt spray to alpine snow — this is a ladder that earns its place on a working Defender. What's Included 🪜 Roof Ladder Kit Full stainless steel ladder assembly with all mounting hardware included 🔩 Mounting Hardware All necessary fixings, brackets, and fasteners for secure installation 📋 Installation Guide Step-by-step fitting instructions for straightforward installation Product Highlights Premium stainless steel construction for exceptional strength and long-term durability Foldable and liftable design allows compact storage when not in active use Quick-release mechanism enables tool-free deployment and stowing in seconds Rustproof and fully corrosion-resistant across all weather environments Direct-fit engineering specific to the Defender L663 (2020–2026) body structure CE certified — meets European safety and quality standards Left-side placement aligns naturally with driver-side roof access workflow Rigid and stable underload, providing confident footing at height Clean integration that complements the Defender's utilitarian exterior aesthetic Suitable for expedition, overlanding, and everyday practical use Compatibility Vehicle Code Year Range Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Defender 90/110 (Classic) L316 1983–2016 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes 🔧 Difficulty: Moderate  ·  ⏱ Estimated Time: 45–90 Minutes  ·  👤 1–2 People Recommended Lay out all components from the kit and verify all hardware is present before beginning installation. Park the Defender on a level surface and ensure the vehicle is stationary and secure throughout the process. Identify the left-side mounting points on the Defender L663 body — refer to the included installation guide for precise locations. Position the ladder assembly against the vehicle and align the mounting brackets with the designated fixing points. Secure the brackets using the supplied hardware, tightening to the torque specification noted in the guide. Do not overtighten. Test the fold-and-lift mechanism through several cycles to confirm smooth, unobstructed operation. Engage the quick-release function to verify secure locking in both the deployed and stowed positions. Conduct a final visual inspection of all fixings and confirm no components are loose before use. ⚠ Important: Professional installation is recommended if you are unfamiliar with vehicle bodywork fixings. Always verify your specific Defender variant (90, 110, or 130) is compatible before fitting. Do not exceed the rated load capacity of the ladder. Periodically inspect all fixings after off-road use. Built for Defenders That Actually Work At Victorious Automotive, we stock accessories chosen for real-world performance — not just aesthetics. This roof ladder is exactly the kind of purposeful addition your L663 deserves. Explore our full Defender exterior range or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for fitment advice. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle variant prior to purchase.

Porsche · Cayman · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayman 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay, Android Auto, and full mirror-linking into your Porsche Cayman's factory PCM3.1 system — no head unit swap, no permanent modifications. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Plug & Play iOS 9+ Aluminium Housing 12V Siri Voice Control Overview The Porsche Cayman built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — capable for its era, but without the native smartphone integration that modern driving demands. Whether you're navigating unfamiliar roads, streaming music, or simply keeping your phone out of your hand, the absence of CarPlay is a daily frustration for many Cayman owners. This PCM3.1 Wireless Apple CarPlay Adapter is engineered specifically for Porsche's factory system architecture. It integrates directly into your existing head unit, retaining all original controls — steering wheel buttons, screen, and interface logic — while adding full wireless Apple CarPlay, Android Auto, and Android Mirror-linking capability. There is no requirement to replace your factory system or drill any new holes. Designed as a true plug-and-play solution, the adapter connects via the factory harness and communicates over CAN-Bus, meaning it works seamlessly with your car's electronics. Once paired, your iPhone connects automatically every time you get in — no cable, no fuss. Siri voice control, real-time navigation, hands-free calling, Spotify, Waze, and more are all available at a touch or a word. What's Included 📦 CarPlay Adapter Module PCM3.1-specific, aluminium housing 🔌 Wiring Harness Factory-matched CAN-Bus connection 🎙️ External Microphone Required — replaces factory SOS-integrated mic 📡 Bluetooth Antenna Enables wireless iPhone pairing 🔧 Mounting Hardware Including screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step printed instructions Product Highlights Wireless Apple CarPlay — iPhone connects automatically via Bluetooth, no cable required Wired CarPlay also supported for maximum stability when preferred Full Android Auto compatibility for Google Maps, Spotify, and more Android Mirror-linking to cast your Android screen to the factory display Retains all original steering wheel and dashboard button controls Siri voice control for completely hands-free operation while driving Supports aftermarket and OEM reverse or front camera integration Offline video and music playback via USB flash drive (up to 32GB) Airplay support for wireless HD video streaming from iOS devices Plug-and-play CAN-Bus integration — no permanent modifications to your Porsche Compatibility This adapter is designed for Porsche vehicles fitted with the PCM3.1 infotainment system. Compatibility requires a NAVI button on the control panel. Vehicles with a CD-AUX button only are not supported. Model Years System Fit Cayman 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit Boxster 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any model with CD-AUX only Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes Confirm your vehicle has a NAVI button on the PCM3.1 control panel before beginning installation. Power down the vehicle and remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Locate the factory harness connector on the rear of the head unit and connect the supplied wiring harness from the adapter module. Mount the adapter module in a suitable location behind the dashboard, ensuring adequate ventilation and no pinched cables. Route and connect the supplied external microphone to a discreet location on the A-pillar or sun visor area. Reinstall the head unit and trim panels, then power on the vehicle to verify the system initialises correctly. Pair your iPhone via Bluetooth — subsequent connections will be fully automatic and wireless. ⚠ Important: If your Porsche is equipped with Sirius Satellite Radio, additional mounting screws are required. Please notify us at the time of ordering and we will include them at no charge. The supplied external microphone must be used — the factory microphone cannot be retained due to its integration with the Porsche SOS emergency system. Upgrade Your Drive Your Porsche Cayman deserves a connected cockpit. This wireless CarPlay adapter brings modern smartphone integration to your PCM3.1 system without compromising the factory look or feel. Shop This Adapter Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model references, and trademarks are used for fitment identification purposes only. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended where required.

Porsche · Cayenne PCM3.1 · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayenne 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full mirror-linking to your Porsche PCM3.1 system — with zero permanent modifications and plug-and-play simplicity. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Hands-Free Calling iOS & Android Aluminium Housing Overview The Porsche Cayenne built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — a capable unit for its era, but one that was never designed for the smartphone-connected world we now live in. Navigation has moved on, streaming music is the norm, and hands-free communication is an expectation rather than a luxury. This adapter bridges that gap entirely. This PCM3.1 CarPlay retrofit module slots directly into your existing head unit via the Can-Bus interface, preserving your original steering wheel controls and factory buttons while unlocking wireless Apple CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. There's no cutting of wires, no permanent alterations, and no compromise to your vehicle's existing functionality — just a clean, professional upgrade that feels like it should have been there from day one. Whether you're routing through Waze, streaming Spotify, making a hands-free call via Siri, or monitoring a reversing camera feed, this adapter handles it all through the screen you already have. The aluminium housing keeps heat dissipation efficient, and with iOS 9 or above supported — including all current iPhone models — compatibility is essentially universal. What's Included 📦 CarPlay Adapter Module PCM3.1-specific retrofit box, aluminium housing 🔌 Can-Bus Interface Harness Plug-and-play vehicle connection loom 🎙️ Dedicated Microphone Included to preserve SOS/factory mic compatibility 📡 Wireless Bluetooth Receiver For wireless iPhone pairing without USB 🔧 Mounting Hardware Installation screws and fixings included 📋 Installation Guide Step-by-step instruction sheet Product Highlights Wireless Apple CarPlay — connect iPhone without a cable via Bluetooth pairing Wired Apple CarPlay also supported for stable, low-latency connection Android Auto compatible — full Google Maps, Assistant & media access Android screen mirroring for full device display on the factory screen Original steering wheel controls fully retained via Can-Bus integration Supports front and reverse aftermarket camera feeds Siri voice control for hands-free navigation, calls, and messaging Offline video and music playback via USB flash drive (up to 32GB) HD video streaming via Airplay and Android Mirror-Link Supports Sirius Satellite Radio vehicles — contact us for fitment screws Compatibility Model Years System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Vehicles with CD-AUX button (no NAVI) Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Fit Recommended Confirm your PCM head unit has a NAVI button on the control panel before beginning. If your vehicle only has a CD-AUX button, this product is not compatible. Remove the centre console trim panels to access the back of the PCM3.1 unit — refer to your vehicle-specific trim removal guide. Connect the Can-Bus interface harness from the adapter module to the corresponding port on the rear of the PCM3.1 unit. Route and connect the dedicated microphone to the adapter module, positioning it near the A-pillar or overhead console for best call quality. Secure the adapter module in a suitable location behind the dash using the included mounting hardware, ensuring adequate ventilation. Refit all trim panels, power on the vehicle, and follow the on-screen pairing instructions to connect your iPhone wirelessly via Bluetooth. ⚠ Important: If your vehicle is fitted with Sirius Satellite Radio, please contact us before installation. We will include the specific additional screws required to ensure a clean, secure fit. A dedicated microphone is included in the box as the factory microphone is integrated with the OEM SOS system and cannot be reused. Upgrade Your Porsche. No Compromise. Join over 12,300 verified customers who've transformed their driving experience with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop All Upgrades Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used for compatibility identification purposes only. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Defender L663 · Exterior Accessories Wind Deflector Guard for Land Rover Defender L663 110 & 130 (2020–2026) A precision-engineered ABS wind deflector guard purpose-built for the Defender L663, reducing cabin turbulence and wind noise while keeping fresh air circulating — no drilling required. Defender L663 110 & 130 2020–2026 High-Quality ABS Direct Fit No Drilling Peel & Stick Install Window Vent Visor Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle built for those who demand capability without compromise — a reborn icon engineered for both serious off-road use and refined everyday driving. Whether you're running the 110 five-door or the long-wheelbase 130 with its expanded passenger configuration, the Defender's architecture benefits enormously from thoughtful exterior upgrades that enhance comfort without altering its purposeful character. These wind deflector guards are designed from the ground up to complement the angular, utilitarian bodywork of the L663. Manufactured from high-quality ABS (Acrylonitrile Butadiene Styrene), they integrate seamlessly into the window channel of each door, creating a low-profile aerodynamic barrier that deflects wind, rain, and road spray away from the cabin aperture. The result is noticeably reduced wind noise at motorway speeds, the ability to crack windows open during light rain without soaking the interior, and improved airflow management for a more pleasant driving environment. Unlike bulkier aftermarket visors, these deflectors keep a clean, factory-adjacent aesthetic that doesn't compromise the Defender's bold visual presence. The finish is carefully matched to suit the L663's window surround, and because the fitment is handled entirely via a peel-and-stick adhesive system, there is no requirement for drilling, cutting, or permanent modification to your vehicle. Installation is clean, reversible, and achievable in under thirty minutes on your driveway. What's Included 🪟 Front Left Deflector Driver-side window vent visor, pre-cut for L663 front door 🪟 Front Right Deflector Passenger-side window vent visor, pre-cut for L663 front door 🪟 Rear Left Deflector Rear driver-side visor, shaped for L663 rear door profile 🪟 Rear Right Deflector Rear passenger-side visor, shaped for L663 rear door profile 🔧 Adhesive Tape Strip Set Pre-applied 3M-grade double-sided tape on each deflector 📋 Installation Guide Step-by-step illustrated fitting instructions included Product Highlights Precision-cut for Land Rover Defender L663 110 and 130 body dimensions High-quality ABS construction — resistant to UV, heat, and impact Reduces wind noise and cabin turbulence at motorway speeds Allows windows to remain cracked open during light rain without water ingress Low-profile design preserves the Defender's bold, factory aesthetic No drilling, no cutting — fully non-invasive peel-and-stick installation Pre-applied 3M-grade adhesive tape for a secure, long-term bond Compatible with both standard and optional window glass configurations Improves interior ventilation, reducing reliance on air conditioning 100% brand new — supplied as a complete four-piece set for all main doors Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 130 L663 2020–2026 Long-Wheelbase SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Verify Before Purchase Defender 110 (Pre-2020) L316 Pre-2020 Classic Utility Not Compatible Range Rover Sport L461 / L494 Various 5-Door SUV Not Compatible Range Rover Vogue L460 / L405 Various 5-Door SUV Not Compatible Installation Notes ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Difficulty: Easy — No Tools Required Clean the window channel: Thoroughly clean the door frame and window surround with an isopropyl alcohol wipe. Remove all wax, polish, and dust residue. Allow to dry completely before proceeding. Dry-fit each deflector: Hold each deflector against the window channel without removing the tape backing. Confirm the profile aligns correctly with the door frame top rail before committing to placement. Peel and position: Remove the adhesive tape backing from the deflector. Starting at one end of the channel, carefully press the deflector into position, working gradually along its length to avoid bubbles or misalignment. Apply firm pressure: Once positioned, press firmly along the entire length of the deflector for 30–60 seconds to activate the adhesive bond. Pay particular attention to the ends and any curved sections. Cure time: Allow a minimum of 24 hours before operating the windows at high speed or washing the vehicle, to allow the adhesive to fully cure against the door surface. Repeat for all four doors: Follow the same process for each deflector in sequence — front left, front right, rear left, rear right — cross-referencing the fitting guide for any door-specific orientation notes. ⚠ Important: Do not attempt installation in temperatures below 5°C or in direct sunlight on a hot day, as extreme temperatures can affect adhesive performance. If your Defender has been previously fitted with aftermarket window tint or sealant near the channel area, clean thoroughly to ensure a clean bonding surface. If unsure about compatibility with your specific build variant, please contact our team before purchasing. Upgrade Your Defender L663 Today Every detail matters on a Defender. These wind deflector guards are a clean, functional upgrade that improves daily usability without compromising the vehicle's character. Browse our full range of Defender L663 exterior accessories and find everything your Land Rover deserves — all in one place. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Defender, L663, and Land Rover) are the property of their respective owners and are used solely for fitment identification and compatibility reference purposes. Please verify compatibility with your specific vehicle variant prior to purchase.

Tefanball · Mini Cooper · Steering Wheel Trim Carbon Fiber Steering Wheel Trim Ring – Mini Cooper R55 R56 R60 R61 Premium carbon fiber ring accent for Mini steering wheels. Pre-applied 3M adhesive, direct fit, showroom finish. R55 / R56 / R60 / R61 2009–2018 Carbon Fiber + Epoxy 119mm Diameter 3M Adhesive Overview Mini Cooper owners who prize interior refinement know that small details define character. The R55 Clubman, R56, R60 Countryman, and R61 Paceman all share a common weakness: that plastic steering wheel ring. This trim piece endures constant hand contact, fades under UV, and screams plasticity against modern cabin materials. The Tefanball Carbon Fiber Steering Wheel Trim delivers motorsport-grade looks without complexity. Genuine carbon fiber laminated in aerospace epoxy, it's lighter and stiffer than OEM plastic, with zero flex. The 119mm diameter hugs the stock ring perfectly. Pre-applied 3M tape means installation takes under 5 minutes—no tools, no adhesive mess, no guesswork. Fits Clubman R55, Cooper Hatch R56, Countryman R60, and Paceman R61 variants seamlessly. Genuine enthusiast upgrade that transforms your steering column from ordinary to genuinely special. What's Included 🎯 Carbon Fiber Ring 119mm diameter, precision-molded 🔧 3M Pre-Applied Adhesive Zero-mess, permanent bond 📋 Installation Guide Step-by-step with temperature notes ✓ Fitment Verified All R-series variants tested Product Highlights Genuine carbon fiber laminate with epoxy resin 119mm diameter, direct fit all Mini R-series Pre-applied 3M industrial-grade adhesive tape Lightweight yet rigid construction UV-stable finish resists fading No modification to steering wheel required Professional appearance, zero sacrifice 5-minute installation, ambient cure Slight elliptical shape allows micro-adjustment Backed by Tefanball quality guarantee Compatibility Model Generation Year Range Fitment Mini Cooper Clubman R55 2009–2014 Direct Fit Mini Cooper / Cooper S R56 2007–2014 Direct Fit Mini Countryman R60 2010–2017 Direct Fit Mini Paceman R61 2013–2018 Direct Fit Later-gen Mini (F55/F56+) F-Series 2015+ Not Compatible Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Clean the Ring: Wipe the existing steering wheel ring with a microfiber cloth. Remove any dust, grease, or residue with a mild IPA solution. Allow to dry completely (≥5 minutes). Inspect Fit: Hold the carbon fiber ring against the steering wheel. Note that the ring may appear slightly elliptical—this is intentional for flexible fit across variants. Rotate gently to find optimal positioning. Align & Position: Identify the alignment marks on the steering wheel. Position the carbon ring symmetrically, centered on the existing plastic ring. Mark reference points lightly with painter's tape if needed. Peel & Apply: Carefully peel back a corner of the 3M adhesive backing. Start at the 12 o'clock position and slowly press the ring onto the wheel, working around in both directions to avoid air bubbles. Set & Pressure: Press firmly and evenly across the entire ring for 30 seconds. Apply extra pressure to edges and seams for maximum bond strength. Cure Time: Allow the adhesive to cure undisturbed for 24 hours. Avoid steering wheel use, water exposure, or vibration during this period. In cold conditions (below 20°C / 68°F), pre-heat the adhesive gently with a heat gun (no more than 2–3 minutes at low setting) before application for optimal stick. ⚠️ Important: If the ring appears asymmetrical after installation, do not force it. Instead, gently rotate it by 2–3mm until it sits flush. This is a feature, not a flaw. The slight elliptical shape allows the trim to accommodate minor steering wheel variations across production runs. Ready to Upgrade? Transform your Mini's steering column in minutes. Premium carbon fiber, pre-taped, engineered for R-series perfection. Ships worldwide. 30-day money-back guarantee on all orders. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars 📦 Worldwide shipping 🔄 30-day guarantee ☎️ +44 203 943 9919 Disclaimer: This product is not affiliated with, endorsed by, or licensed by BMW Group, Mini, or Bayerische Motoren Werke AG. Mini, Cooper, Clubman, Countryman, and Paceman are registered trademarks of BMW. Victorious Automotive is an independent aftermarket specialist. All specifications and fitment claims are made in good faith based on community testing and OEM dimensions.

Victorious Automotive · Range Rover Velar · Exterior Protection Headlamp Tint Pre-Cut Film – Range Rover Velar 2018–2020 Precision pre-cut TPU headlamp tint film engineered to protect and transform the front lighting signature of your Range Rover Velar — available in Blackened Smoke or Crystal Clear. Range Rover Velar 2018–2020 Top TPU Material Self-Healing Scratch Resistant Blackened & Clear Pre-Cut Fit 2-Piece Kit Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — its flush LED headlamps and sleek frontal architecture are central to its visual identity. Keeping those headlamp lenses in pristine condition against stone chips, road debris, UV degradation and daily wear is something every Velar owner should prioritise from day one. This pre-cut headlamp tint film is manufactured from premium Top TPU — the same grade of thermoplastic polyurethane used in professional paint protection applications. Unlike adhesive vinyl films, TPU is optically clear at a molecular level, meaning light output is never compromised. The self-healing surface actively closes minor swirl marks and surface abrasions when exposed to heat, keeping the film looking factory-fresh for years. Available in two finishes — Blackened Smoke for a blacked-out, stealth aesthetic that complements the Velar's already dramatic lines, and Crystal Clear for invisible protection that maintains the OEM look — both options are precision pre-cut to the exact headlamp contours of the 2018–2020 Range Rover Velar, ensuring a seamless, bubble-free install with no trimming required. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels for the Velar headlamps 🛠️ Application Tool Kit Included as a gift to assist with installation 📋 Installation Guide Step-by-step instructions for a clean finish 🎨 Choice of Finish Blackened Smoke or Crystal Clear — select at checkout Product Highlights Precision pre-cut for the Range Rover Velar 2018–2020 — no trimming needed Top-grade TPU material — flexible, durable and optically superior Self-healing surface technology — minor scratches disappear with heat Scratch and abrasion resistant — protects against stone chips and road debris UV-stabilised formula — prevents lens yellowing and hazing over time Available in Blackened Smoke for a stealth look or Crystal Clear for OEM finish Maintains full headlamp light output — zero optical interference Bubble-free adhesive backing — clean, professional finish every time Residue-free removal — will not damage or stain OEM headlamp lenses Includes application tools — everything you need in one package Vehicle Compatibility Vehicle Year Range Fitment Range Rover Velar 2018–2020 Direct Fit Range Rover Velar 2017 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–Present Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2018–Present Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L461 2022–Present Verify Before Purchase Range Rover Vogue L460 2022–Present Verify Before Purchase Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Tools Required Thoroughly clean the headlamp lens surface with an isopropyl alcohol solution and allow to dry completely — any dust or grease will affect adhesion. Work in a warm, dust-free environment. A garage or sheltered area at 15–25°C is ideal. Warmer conditions improve film flexibility and conformity. Lightly mist the headlamp surface with a water and soap solution (wet application method) to allow repositioning during placement. Carefully peel the backing from the pre-cut TPU film, keeping the adhesive side away from surfaces. Align the film to the headlamp contour before committing. Apply the film from the centre outward using the included squeegee tool, working any air bubbles towards the edges progressively. Use a heat gun or hairdryer on a low setting to gently warm the film around curves and edges — this improves adhesion and conformity to complex shapes. Allow 24–48 hours for the adhesive to fully cure before washing the vehicle or exposing the film to heavy rain. ⚠ Note: Ensure the headlamp surface is completely free of wax, polish or ceramic coating residue before application. Residual coatings will significantly reduce adhesive bond strength and may cause lifting at the edges. If your lenses have been previously coated, lightly decontaminate with a clay bar or isopropyl wipe before fitting. Complete Your Velar Build Explore the full Victorious range of Range Rover Velar accessories — from interior refinements to exterior protection — curated exclusively for owners who refuse to compromise. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Head Pillow Adjustment Button Cover Trim for Land Rover Defender 90 & 110 L663 (2020+) A precision-cut chrome accent trim that transforms the headrest adjustment controls of your Defender into a cohesive, premium detail — the finishing touch every thoughtfully specified interior deserves. Defender L663 2020+ ABS Chrome Direct Fit No Drilling Interior Trim Silver / Chrome ISO9001 Certified Model LLK2620 Overview The Land Rover Defender L663 is a vehicle that rewards attention to detail. From its purposeful exterior stance to its carefully considered interior layout, every surface contributes to the overall experience. But even from the factory, there are small opportunities to elevate — areas where a considered upgrade elevates the cabin from functional to genuinely refined. The headrest adjustment button surround is one of those moments. Factory-spec, it can look purely utilitarian against an otherwise well-appointed interior. This ABS Chrome Head Pillow Adjustment Button Cover Trim is engineered to address exactly that — cladding the button surround in a polished chrome-finish ABS fascia that harmonises with the metallic accents already present throughout the Defender's cabin architecture. Manufactured to ISO9001 quality standards and constructed from high-grade ABS, this trim is designed for durability as much as aesthetics. Installation requires no tools and no modification — a clean, confident upgrade that any Defender owner can complete in minutes, with results that look entirely factory-fitted. What's Included 🪞 Chrome Button Cover Trim x1 — ABS chrome-finish headrest adjustment surround 🔧 Automotive Adhesive Tape Pre-applied — strong bond, clean removal if needed 📄 Installation Guide Step-by-step fitment reference included Product Highlights Polished chrome ABS finish that mirrors factory metallic cabin accents Precision-cut for seamless integration with Defender 90 & 110 L663 headrests High-grade ABS construction — resistant to UV fading and cabin heat Pre-applied automotive-grade adhesive for a clean, tool-free install ISO9001 certified manufacturing for consistent quality assurance Lightweight at 200g — no impact on headrest function or adjustment Silver chrome colour complements both dark and light interior themes No drilling, cutting, or permanent modification required Instantly elevates the perceived quality of the rear and front headrest area Compatible with both Defender 90 and Defender 110 L663 variants Compatibility Model Variant Year Range Fitment Land Rover Defender 110 L663 — All Trims 2020 – 2026 Direct Fit Land Rover Defender 90 L663 — All Trims 2020 – 2026 Direct Fit Land Rover Defender 130 L663 — All Trims 2022 – 2026 Verify Before Ordering Range Rover Sport L494 All 2013 – 2022 Not Compatible Range Rover Vogue L405 All 2013 – 2021 Not Compatible Range Rover Velar All 2018 – 2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked and the interior at ambient temperature — avoid installation in extreme cold or direct sunlight, as this affects adhesive performance. Thoroughly clean the headrest adjustment button surround area using an isopropyl alcohol wipe. Remove all dust, oils, and residue. Allow to dry completely for at least 60 seconds. Dry-fit the chrome trim cover to the button surround before committing — confirm alignment, orientation, and clearance around the adjustment button itself. Peel back the protective film from the pre-applied adhesive tape on the reverse of the trim piece. Carefully align the trim to the surround and apply firm, even pressure for 30–60 seconds across the entire surface to activate the adhesive bond. Allow a minimum of 2 hours before applying any cleaning products to the area. Full adhesive cure is achieved after 24 hours. ⚠ Important: The automotive adhesive is strong and placement is largely permanent once bonded. Take your time with alignment during the dry-fit stage. Do not attempt to forcibly remove the trim after bonding, as this may affect the underlying surface finish. Complete Your Defender Interior This trim is part of a wider collection of precision interior upgrades designed exclusively for the Defender L663. Every piece is selected to integrate seamlessly — so your cabin looks considered, not modified. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Chrome Gear Shift Surround Trim for Land Rover Defender 110 L663 (2020–2026) A precision-formed chrome accent that frames the Defender 110's gear selector surround with a clean, upmarket finish — transforming one of the most-touched areas of the cabin without a single tool. Defender L663 2020–2026 Chrome-Plated Interior Trim Gear Shift Surround No-Tool Fit Direct Fit Peel & Stick Overview The 2020-onward Land Rover Defender 110 L663 represents a bold reimagining of one of the most iconic 4x4s ever built. Its interior is a purposeful blend of utilitarian design and modern technology — but for owners who want to push the cabin's visual quality a step further, the factory plastic surrounding the gear selector can feel like an opportunity left on the table. This Chrome Gear Shift Surround Trim is engineered specifically to the L663 Defender 110's centre console geometry. The chrome-plated surface catches the ambient light beautifully, drawing the eye toward the gear selector area and adding a layer of premium detail that reads as OEM-quality rather than aftermarket. It sits flush against the factory surround with no raised edges, gaps, or misalignment — because it was designed for exactly this vehicle, not adapted from a generic template. For Defender owners who have already upgraded their door handles, steering wheel trim, or dashboard accents, this piece completes the chrome accent language across the console. It's the kind of detail that's immediately noticeable to anyone who knows the Defender interior well — and entirely invisible to anyone who doesn't. What's Included 🪄 Chrome Gear Shift Surround Trim 1 × pre-formed chrome-plated trim piece, L663-specific profile 🔧 Installation Instructions Step-by-step guide for a clean, confident fit first time 🩹 Pre-Applied Adhesive Backing Industrial-grade 3M-style tape already applied to reverse face 🧤 Protective Packaging Chrome surface protected during transit to prevent scuffs Product Highlights Precision-cut to match the exact L663 Defender 110 gear surround profile High-gloss chrome-plated ABS plastic — durable and resistant to daily wear Pre-applied industrial adhesive backing for a clean, tool-free installation Flush-mounted fit with no visible gaps, overhang, or lifting edges Complements existing chrome or brushed accents throughout the L663 cabin Resistant to UV fading and interior temperature fluctuations Fully reversible — removes cleanly without damaging factory plastic Adds a premium visual focal point to the centre console area Lightweight construction — no added weight or interference with gear operation Designed and quality-checked for the Defender 110 L663 specifically Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Ensure the vehicle is parked, ignition off, and the gear selector is in Park (P). Allow the centre console to reach room temperature if the vehicle has been parked in cold conditions. Thoroughly clean the factory gear shift surround with an isopropyl alcohol wipe. Remove all dust, oils, and residue. Allow the surface to dry completely before proceeding — this is the single most important step for long-term adhesion. Dry-fit the chrome trim piece over the surround without removing the adhesive backing. Confirm alignment and check that all edges sit flush against the factory plastic. Peel the protective film from the adhesive backing. Starting from one end, carefully position the trim piece and press it firmly into place using the heel of your palm. Work from the centre outward to prevent air pockets. Apply firm, sustained pressure across the entire trim surface for 30–60 seconds. Pay particular attention to the corners and edges. Allow the adhesive to cure undisturbed for a minimum of 1 hour before normal use. Full bond strength is achieved after 24 hours. ⚠ Note: Do not apply in temperatures below 10°C (50°F) as this reduces adhesive performance. Avoid cleaning the trim with solvent-based products after installation — a damp microfibre cloth is sufficient for ongoing maintenance. Complete Your Defender 110 Interior This trim pairs perfectly with our full range of Defender L663 interior accessories — from door handle surrounds to dashboard accent sets. Explore the complete collection and build the cabin your Defender deserves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment and compatibility identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Silver Aluminum Alloy Air Conditioning & Audio Control Knobs Trim — Land Rover Defender 110 (2020) A precision-machined aluminium upgrade that replaces the factory plastic knobs with a refined, tactile finish that suits the Defender's rugged-yet-premium character. Defender L663 2020 Model Year Aluminum Alloy Silver Finish AC Knobs Audio Control Trim Direct Fit No Drilling Required Overview The 2020 Land Rover Defender 110 (L663) marked a watershed moment for the nameplate — a thoroughly modern reinterpretation of an icon, built around a premium interior that blends utilitarian durability with genuine luxury. The centre console and climate control panel occupy a commanding position in the cabin, and the quality of every surface you touch directly shapes how the space feels on long drives and off-road adventures alike. These Silver Aluminum Alloy Air Conditioning and Audio Control Knobs Trim pieces are engineered as a direct-fit replacement for the 2020 Defender 110. Machined from high-grade aluminium alloy and finished in a clean, brushed silver, they bring a noticeably more substantial, purposeful feel to the controls you interact with every time you adjust your climate or audio settings. Where the factory plastic can feel at odds with the rest of the cabin's premium ambition, these knobs close that gap with minimal effort. Installation requires no cutting, drilling, or specialist tools — the trim is designed to locate precisely onto the existing control stalks and secure without modification. For Defender owners who appreciate their vehicle and want every detail to reflect that, this is one of the most satisfying interior upgrades available for the money. What's Included 🔩 AC Control Knobs Trim Full set, silver aluminium alloy finish 🎚️ Audio Circle Trim Rings Matching finish for audio control interface 📦 Protective Packaging Securely packed to prevent transit damage 📋 Fitment Guide Basic installation reference included Product Highlights Precision-machined from high-grade aluminium alloy for lasting durability Brushed silver finish complements the Defender 110's premium interior palette Direct-fit design engineered specifically for the 2020 Defender L663 Replaces factory plastic with a noticeably more premium, tactile feel No drilling, cutting, or permanent modifications required Resistant to wear, heat, and UV fading from daily use Lightweight aluminium construction — adds no meaningful weight to controls Manufactured to international quality standards for consistent finish Fully covers existing control bases for a clean, factory-integrated look 100% brand new — not refurbished or remanufactured Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020 Direct Fit Land Rover Defender 90 L663 2020 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 15–30 Minutes  |  🔧 Tools Required: None Ensure your Defender 110 is switched off and the interior is at ambient temperature before beginning. Carefully examine the existing factory plastic knobs on your AC and audio control panel to familiarise yourself with their position and orientation. Gently grip the factory knob and pull firmly but evenly away from the panel to release it from the control shaft. Do not twist — pull straight out. Align the new aluminium alloy knob trim with the corresponding shaft, ensuring correct orientation for any directional markers. Press the new knob firmly and evenly onto the shaft until it seats securely and sits flush against the panel surface. Repeat for all remaining knobs in the set, then test each control for smooth, full-range operation before completing. ⚠; Please Note: This product is listed as a confirmed direct fit for the 2020 Land Rover Defender 110 (L663). If you own a Defender 90, Defender 130, or a different model year, please verify compatibility with our team before purchasing. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment for your specific vehicle. Complete Your Defender Interior These knobs are just the start. Explore our full range of Defender L663 interior upgrades — from gear selector surrounds to dashboard trim — all designed to the same standard of fit and finish. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. Vehicle model names, codes, and trademarks are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle before installation.

Victorious · Universal · Interior Comfort Car Seat Headrest Neck Rest Cushion – Premium Memory Foam Support Transform your daily commute with ergonomic neck support designed for long-distance comfort and reduced fatigue. Universal Fit Memory Foam Neck Support Car Interior Portable Overview Whether you're driving your Range Rover Sport L461 across challenging terrain or settling in for a long motorway journey, neck fatigue and poor posture can quickly undermine your comfort and focus. The Car Seat Headrest Neck Rest Cushion is engineered to provide targeted cervical support, reducing strain during extended drives and making every journey more enjoyable. Built with premium memory foam technology and wrapped in soft PU/cloth upholstery, this headrest cushion conforms to your neck's natural contours. The synthetic fibre filling ensures lasting durability and washable convenience—ideal for the demands of daily automotive use and long expeditions. Installation is instantaneous: simply position over your existing headrest. No tools, no modifications, no fuss. Perfect for Land Rover Defenders, Range Rovers, Discovery models, and any vehicle where comfort matters. What's Included 🛫 1x Headrest Cushion Premium memory foam, ready to install Product Highlights Memory foam contours to your neck shape for personalised support PU/cloth and synthetic fibre construction for durability and comfort Universal fit—works with any standard vehicle headrest Washable cover for easy maintenance and long-term hygiene Reduces cervical strain on long drives and daily commutes Lightweight and portable—take it between vehicles if needed Enhanced cabin ergonomics without permanent modification Breathable fabric minimises heat buildup during summer drives Affordable upgrade for Range Rover, Defender, Discovery, and Evoque owners Backed by Victorious' 30-day money-back guarantee Compatibility Vehicle Status Range Rover Sport L461 (2022–2026) Direct Fit Range Rover Vogue L460 (2022–2026) Direct Fit Defender L663 (2020–2026) Direct Fit Range Rover Vogue L405 (2013–2020) Direct Fit Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Velar (2018–2022) Direct Fit Land Rover Discovery 5 (2017–Present) Direct Fit Land Rover Discovery Sport (2015–Present) Direct Fit Range Rover Evoque L551 (2019–Present) Direct Fit Toyota Land Cruiser LC300 / LC250 Direct Fit Mercedes G-Class (All Generations) Direct Fit Jaecoo J7 Direct Fit All Other Vehicles with Standard Headrests Compatible Installation ⏱ Difficulty: Beginner | Time: 2 minutes Remove the cushion from packaging and inspect for any damage. Locate your vehicle's existing headrest—usually on the driver or passenger seat back. Slide the neck rest cushion cover over the top of the headrest, ensuring even coverage on both sides. Adjust the cushion height and angle to suit your preferred neck support position. Sit back and enjoy enhanced comfort on your next journey. Note: This cushion is designed to fit standard OEM headrests. If your vehicle has oversized or non-standard headrests, measure the headrest width (typically 25–35 cm) before ordering. For custom fitment queries, contact our team on +44 203 943 9919. Elevate Your Comfort Today Long drives shouldn't mean neck pain. Our premium headrest cushion has transformed the comfort of thousands of Land Rover and Range Rover owners. Experience the difference memory foam support can make on your next expedition—or your daily school run. Add to Basket Use code 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ 4.9/5 stars from 12,300+ reviews ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ UK support: +44 203 943 9919 Victorious Automotive is an independent aftermarket supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any OEM manufacturer. Product names and vehicle codes are used for compatibility and identification purposes only. All trademarks are the property of their respective owners.

Victorious · Defender 90/110 · Exterior Protection Front Bumper U Bar Bull Bar Cover for Land Rover Defender 90 110 Heavy-duty polypropylene bull bar combining rugged protection with refined aesthetics for classic and modern Defenders. Defender 90 Defender 110 1990–2016 Polypropylene Direct Fit Off-Road Ready Overview The Land Rover Defender 90 and 110 are workhorses that demand equally capable protection. Whether you're traversing challenging terrain or navigating urban environments, the front fascia faces constant exposure to impacts, debris, and weathering. A proper bull bar isn't just cosmetic—it's essential infrastructure for your vehicle. This front bumper U bar and cover assembly delivers both. Engineered from high-quality polypropylene, it provides genuine impact protection while maintaining clean, proportional design language that complements the Defender's classic proportions. The integrated U-channel structure distributes force across a wider contact area, reducing localized damage to the chassis. Installation is straightforward with included mounting hardware. The design accounts for factory bumper integration, meaning no permanent modifications to your Defender. It's the kind of accessory that looks like it should have been factory-fitted from day one. What's Included 🛡️ Front Bumper Cover Complete polypropylene assembly 🔧 U Bar Structure Integrated protective channel ⚙️ Mounting Hardware Stainless fasteners and brackets 📋 Fitting Instructions Step-by-step installation guide Product Highlights Precision-engineered for Defender 90 and 110 fitment Durable polypropylene resists UV, salt, and impact Integrated U bar design maximises structural strength Bolt-on installation—no welding required Factory-style integration with minimal aesthetic compromise Protects radiator, cooling system, and chassis from frontal impacts Lightweight design does not compromise fuel economy Compatible with standard accessory mounting points Weather-resistant finish maintains appearance long-term Cost-effective alternative to chassis damage repair Compatibility Model Year Fitment Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 90 (2020–2026) 2020–2026 Not Compatible Defender 110 (2020–2026) 2020–2026 Not Compatible Installation Notes Difficulty: Easy | Time: 45–90 minutes Ensure vehicle is on a level surface with engine off and cooled. Remove the factory bumper cover by unbolting fasteners (8–12 bolts depending on year). Position the new U bar assembly against the front chassis, aligning mounting holes with factory points. Install provided stainless steel fasteners, tightening in a cross pattern for even pressure. Verify all attachment points are secure; bump test the assembly gently before driving. Inspect fitment around edges for gaps; minor adjustment may be required. Note: If your Defender has been modified with a non-standard suspension or bumper height, test fitment before fully securing. Some winch-equipped vehicles may require spacer modification. Why Victorious This bull bar represents the kind of thoughtful engineering you expect from Victorious. We source materials that survive UK weather and tough off-road environments. Every Defender owner who has chosen our accessories knows that quality protection doesn't mean compromising on style—and this front bumper assembly proves it. Protect Your Defender Quality front protection is an investment in longevity. Add this U bar assembly to your Defender today and drive with confidence. Shop Defender Exterior Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All vehicle names and trademarks are property of their respective owners. Product compatibility is based on standard factory specifications; modifications to your vehicle may affect fitment.