Best selling products

Victorious Automotive · Range Rover Evoque · Emergency & Warning Lighting 2×3 LED Strobe Warning Light – DC 12V Ambulance Police Flashing Light for Range Rover Evoque A compact, high-visibility 12V LED strobe unit delivering powerful flashing patterns for auxiliary warning, security, and emergency use on the Range Rover Evoque. Range Rover Evoque L538 Range Rover Evoque L551 DC 12V 2×3 LED Array Strobe Flash Plastic + LED Universal Fit CE Certified MZORANGE 0.1 kg Overview The Range Rover Evoque is a compact luxury SUV that balances refined urban capability with genuine off-road credibility. Whether you're running the L538 generation or the more recent L551, the Evoque's distinctive silhouette and premium cabin deserve accessories that match both its practicality and its character. For owners who require auxiliary warning or security lighting — whether for professional use, convoy work, or enhanced visibility in remote environments — a dedicated strobe light unit is an essential and discreet addition. This 2×3 LED strobe warning light from MZORANGE is a purpose-built DC 12V unit designed for direct integration into any 12-volt vehicle electrical system, making it entirely compatible with all Evoque variants. The six high-power 1W LEDs are arranged in a 2×3 matrix within a robust plastic housing, producing intense, attention-commanding strobe flash patterns that are immediately recognisable in both daylight and low-light conditions. Compact enough to mount discreetly on the grille, dashboard interior, or rear shelf, yet powerful enough to serve as a genuine auxiliary warning light, this unit suits Evoque owners operating in professional, agricultural, or security-adjacent contexts. Its universal 12V wiring means integration is straightforward, and the lightweight 100g construction imposes no meaningful load on any mounting surface. What's Included 💡 2×3 LED Strobe Unit Six 1W high-power LEDs in plastic housing 🔌 Wiring Leads Pre-attached DC 12V connection leads 🔵 Lens Cover Included coloured lens for light diffusion 📎 Mounting Hardware Basic fixings for surface or bracket mounting Product Highlights Six high-power 1W LEDs in a 2×3 array for maximum light output DC 12V operation — fully compatible with Evoque electrical systems Intense strobe flash pattern for high-visibility warning use Compact and lightweight at just 100g for discreet placement CE certified unit meeting basic external safety standards Durable plastic and LED construction built for sustained use Lens included for improved light diffusion and colour output Universal vehicle fit — suitable across all Evoque generations Suitable for grille, interior dash, or rear mounting positions Ideal for security, convoy, agricultural, and auxiliary warning use Compatibility Vehicle Generation / Code Year Range Fit Range Rover Evoque L538 (First Gen) 2011–2018 Direct Fit Range Rover Evoque L538 (Facelift) 2019 Direct Fit Range Rover Evoque L551 (Second Gen) 2019–2026 Direct Fit Land Rover Discovery Sport L550 2015–2026 Direct Fit Range Rover Velar L560 2018–2024 Direct Fit Defender L663 2020–2026 Direct Fit Range Rover Sport L494 / L461 2013–2026 Direct Fit Range Rover Vogue L405 / L460 2013–2026 Direct Fit Land Rover Defender (Classic) Pre-2016 2004–2016 Direct Fit 48V Mild Hybrid Systems Any Model 2020+ Verify Before Wiring Installation Notes 🔧 Difficulty: Easy · Estimated Time: 20–40 Minutes Select your preferred mounting location — grille bracket, interior dashboard panel, or rear parcel shelf are the most common positions on the Evoque. Ensure the vehicle ignition is off before beginning any wiring work. Disconnect the negative terminal of the battery if running the wiring through the bulkhead. Route the 12V positive lead to a switched ignition source or auxiliary relay — avoid tapping directly into permanent live circuits unless fitting a dedicated switch. Connect the ground lead to a clean chassis earth point. Avoid painted surfaces; use an existing ground bolt for best conductivity. Secure the strobe unit to the chosen surface using the supplied mounting hardware or appropriate adhesive brackets. Ensure the lens faces the intended direction of visibility. Restore power and test the unit through all flash modes before finalising cable routing and tidying looms with conduit or ties. ⚠ Important: The use of blue or red strobe lights on public roads is restricted or prohibited in the UK and most jurisdictions unless the vehicle is an authorised emergency service vehicle. Always check local road traffic legislation before operating this unit externally on a public highway. This product is sold for off-road, private land, security, and auxiliary use. Shop the Full Evoque Collection From lighting upgrades to interior refinements, Victorious Automotive carries everything the serious Evoque owner needs — curated, tested, and shipped worldwide. Shop Evoque L551 Accessories Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx, UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes. Always verify compatibility with your specific vehicle variant before purchase. Use of warning lighting on public roads is subject to local legislation — the buyer assumes full responsibility for lawful use of this product.

Victorious Automotive · Universal Fit · Detailing & Cleaning Alloy Wheel Scrub Brush Professional-grade cleaning brush engineered to restore alloy wheels to showroom finish without damage. Universal Fit Plastic Construction 25cm Length Professional Grade Lightweight Overview Whether you're maintaining a Range Rover Sport L461, Defender L663, Discovery 5, or any premium 4x4, keeping alloy wheels pristine is non-negotiable. Road grime, brake dust, and mineral deposits accumulate quickly, dulling the finish of your wheels and undermining the overall appearance of your vehicle. A dedicated wheel cleaning brush isn't just a convenience—it's essential maintenance. The Alloy Wheel Scrub Brush is purpose-built for precision wheel care. Its ergonomic design and strategically angled bristles reach into spoke crevices and around callipers where standard sponges fail. The plastic construction is safe for clearcoated alloys, protecting your investment while delivering thorough, streak-free results. At just 50g and 25cm long, it's compact enough to live in your cleaning kit year-round. This brush transforms wheel cleaning from a tedious chore into a controlled, efficient process. Pair it with your preferred wheel cleaner, work methodically around each wheel, and watch brake dust and grime dissolve. The difference in your vehicle's presentation is immediate and dramatic. What's Included 🪥 Scrub Brush 25cm length, angled bristles Product Highlights Engineered for alloy wheel cleaning without scratching 25cm length reaches deep into spoke geometry Durable plastic bristles handle tough brake dust Lightweight 50g design—easy to control and handle 6.5cm width fits comfortably in hand for extended use Works with all wheel cleaner formulations Compact storage—fits in wheel cleaning kits and car bags Safe for clearcoated, polished, and matte finishes Precision-angled head for caliper and lug access Professional detailing standard at automotive workshops globally Compatibility Vehicle Series Code / Year Fit Status Range Rover Sport L461 (2022–2026) Direct Fit Range Rover Vogue L460 (2022–2026) Direct Fit Defender L663 (2020–2026) Direct Fit Range Rover Velar 2018–2022 Direct Fit Discovery 5 2017–Present Direct Fit Range Rover Evoque L551 / L538 Direct Fit Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Vogue L405 (2013–2020) Direct Fit Land Cruiser LC300 / LC250 Direct Fit Mercedes G-Class G-Wagon All Years Direct Fit All Other 4x4s Universal Direct Fit Installation & Usage Wheel Cleaning Process Rinse wheels thoroughly with water to loosen surface dirt and dust. Apply your preferred alloy wheel cleaner according to product instructions; allow dwell time if recommended. Using the scrub brush, work methodically around each wheel, paying attention to spoke recesses and brake calliper areas. Use controlled circular motions; avoid excessive pressure that could damage finish. Rinse completely with clean water; repeat for stubborn brake dust buildup. Dry with microfiber towels to prevent water spotting and mineral residue. Store in a dry location between uses; rinse brush thoroughly after each use. Note: Always test wheel cleaner on an inconspicuous area first. Avoid using on unprotected bare metal or unpainted alloys without professional guidance. This brush is not suitable for damaged or flaking finishes—consult a specialist first. Keep Your Alloys Pristine Wheels are the first thing people notice. With the Alloy Wheel Scrub Brush in your detailing arsenal, maintaining that showroom shine becomes effortless—every wash, every season, every mile. Shop Wheel Care Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, or Mercedes-Benz. All vehicle names and model designations are registered trademarks of their respective manufacturers. This product is designed for universal fitment and is compatible with vehicles listed herein. Always verify compatibility with your specific vehicle before purchase.

Product Description: Elevate your vehicle's interior with this stylish Carbon Fiber Steering Wheel Button Trim. Designed for a flawless fit, it brings a refined touch to your driving environment. Product Highlights: Sleek carbon fiber finish for a modern aesthetic. Precision laser cutting for perfect alignment. Available in multiple colors for personalized style. Product Specifications: Compatibility: Range Rover Vogue (2013-2017), Range Rover Sport (2014-2017), Discovery 5 (2017-2018). Material: High-quality carbon fiber. Style: Style A. Package Includes: 1 x Set of Carbon Fiber Steering Wheel Button Trim Notes: Ensure compatibility by verifying your car model and year. Simple installation with no modifications needed.

Victorious · Mercedes W205 · Infotainment Mercedes NTG5 Wireless Apple CarPlay & Android Auto Integration – 2015–2019 Seamless wireless smartphone mirroring for your Mercedes cabin, retaining factory controls and adding premium navigation, music, and voice command in one elegant interface. W205 / NTG5 2015–2019 Wireless CarPlay Android Auto OEM Integration Voice Control Overview This wireless CarPlay and Android Auto integration transforms your Mercedes-Benz W205 cabin into a modern connected hub. Compatible with A, B, C, E, G, CLA, GLA, GLC, and S-Class models equipped with NTG5 infotainment systems (7" and 8.4" displays), this interface bridges your smartphone seamlessly without sacrificing factory functionality. Built for the discerning Mercedes owner who demands reliability without compromise, the system maintains full access to steering wheel controls, rotary knob navigation, and all OEM features while adding wireless Bluetooth and WiFi connectivity. Access Google Maps, Waze, Apple Maps with live traffic, stream Spotify and Apple Music, and control everything via voice—all while keeping your hands on the wheel. Installation is straightforward for automotive electrical specialists, and the system retains compatibility with aftermarket camera systems. A 30-day money-back guarantee and our 4.9-star track record across 12,300+ verified reviews back every purchase. What's Included 📦 Wireless Interface Unit Plug-and-play integration module for NTG5 systems 📖 Installation Guide Step-by-step professional wiring documentation Product Highlights Wireless Bluetooth and WiFi connectivity with USB fallback option Apple CarPlay and AirPlay support for seamless iOS integration Android Auto mirroring with full smartphone app access Real-time GPS navigation via Google Maps, Waze, and Apple Maps Premium music streaming: Spotify, Apple Music, Amazon Music Hands-free voice control for safety and convenience Aftermarket camera compatibility maintained Retains factory steering wheel and knob controls EQ audio customization and USB media playback Drop-in integration with no screen replacement needed Compatibility Model Series Year Range Screen Size NTG System Status A-Class (W176) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible B-Class (W246) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible C-Class (W205) 2015–2019 7" / 8.4" NTG5.0–5.5 Compatible E-Class (W213) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible G-Class (W463) 2015–2019 7" / 8.4" NTG5.0–5.1 Compatible CLA-Class (C117) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible GLA-Class (X156) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible GLC-Class (C253) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible S-Class (W222) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible Pre-2014 or Non-NTG5 Before 2014 Any Older systems Not Compatible Installation Notes Difficulty Level: Intermediate Estimated Time: 1–2 hours with professional installation recommended. Disconnect the car battery to isolate power circuits. Remove the infotainment unit bezel and display trim using appropriate panel tools. Carefully disconnect all factory connectors from the rear of the NTG5 unit. Connect the wireless interface harness to the OEM connector block. Secure the interface module discreetly behind the dashboard or in a trim pocket. Reconnect the battery and power on the vehicle. Pair your smartphone via Bluetooth and test CarPlay or Android Auto connectivity. Verify all factory controls (steering wheel buttons, rotary knob) function correctly. Important: Ensure your vehicle's AUX functionality is enabled before purchase. If uncertain, consult your Mercedes dealer's configuration settings or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Professional installation by an automotive electrical specialist is strongly recommended to avoid damage to OEM systems. Ready to Elevate Your Cabin Tech? Transform your Mercedes infotainment into a modern wireless hub without sacrificing factory controls or reliability. Join over 12,300 satisfied owners who trust Victorious Automotive for premium integration solutions. Add to Cart Unlock 20% off any 2 items with code 22GET20 ✓ 4.9/5 Stars · 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT ✓ Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official Mercedes trademark holder. All product names and specifications are provided for compatibility reference only. Always verify compatibility with your specific vehicle before purchase. Installation is at the owner's risk; professional automotive electrical installation is recommended.

```html Jaguar · E-Pace · Interior Trim Carbon Fibre Interior Console for Jaguar E-Pace 2018–2020 Precision-cut carbon fibre gear shift trim that transforms your E-Pace interior with motorsport-grade styling. E-Pace 2018–2020 Carbon Fibre ABS Composite Gear Shift Trim Direct Fit Overview The Jaguar E-Pace demands interior refinement that matches its dynamic exterior. This carbon fibre interior console upgrade transforms your centre console and gear shift surround with authentic motorsport styling, instantly elevating the visual impact of your cabin. Precision-cut from high-quality ABS composite with a genuine carbon fibre weave finish, this trim piece sits flush against your existing interior without modification. The textured weave catches light beautifully and creates depth and dimensionality—a detail that separates cars that are merely owned from those that are truly refined. Installation is straightforward, requiring no specialist tools or permanent modifications. Once fitted, the console becomes an integral part of your E-Pace's design language, perfectly complementing factory trim and aftermarket upgrades alike. What's Included 🎯 Console Trim Panel Single-piece centre console cover ✓ Pre-Fitted Adhesive Factory-grade contact backing 📋 Installation Guide Step-by-step visual instructions 🔒 30-Day Guarantee Full refund if not satisfied Product Highlights Authentic carbon fibre weave finish—no cheap imitations High-quality ABS composite for durability and lightweight design Precision-cut to OEM dimensions—seamless factory fit Pre-applied contact adhesive—no additional materials needed Resistant to fading, UV damage, and thermal stress Complements both factory and modified interiors Reversible installation—leaves no permanent marks Works with all E-Pace trim levels (S, R-Dynamic, HSE) Professional finish that rivals dealer-installed upgrades Part of a complete E-Pace interior upgrade system Compatibility Vehicle Years Fitment Jaguar E-Pace 2018–2020 Direct Fit Jaguar E-Pace 2021–Present Not Compatible Installation Notes Difficulty Level: Beginner | Time: 15 Minutes Remove protective film from the back of the trim panel. Clean the factory console surface thoroughly with a microfibre cloth and isopropyl alcohol. Allow to dry completely. Carefully position the trim panel above the centre console to verify alignment. Once satisfied with placement, press firmly into position, working from the centre outward to eliminate air pockets. Allow the adhesive 24 hours to cure before using the centre console controls. Note: Do not apply heat or excessive pressure during installation. Ensure the factory surface is completely dry to guarantee adhesive bond strength. Ready to Upgrade Your E-Pace? Transform your interior with the precision and style of true motorsport engineering. This carbon fibre console trim is the detail that catches every eye and reminds you why your E-Pace deserves the best. Shop Carbon Fibre Interior Trim Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back ✓ 4.9★ Verified Reviews ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, or any of its subsidiaries or group companies. All product names, logos, and trademarks are the property of their respective owners. ```

Victorious Automotive · Range Rover Velar · Exterior Styling Silver & Black Hood Vent Slats for Range Rover Velar 2017–2019 Transform your Velar's bonnet with precision-finished two-tone vent slat trims that deliver the Dynamic Edition look — no drilling, no fuss, no compromise. Range Rover Velar 2017–2019 Silver & Black Bonnet Vent Trims Peel & Stick Exterior Styling High-Grade ABS No Drilling Required Overview The Range Rover Velar arrived with one of the most architecturally considered silhouettes in the modern SUV era — flush surfaces, flush door handles, and a bonnet line that draws the eye from front to rear. The hood vent apertures are a defining detail of that design, and yet in standard trim, they remain understated. These Silver and Black Hood Vent Slat Trims are designed specifically for Velar owners who want to unlock the full visual intent of that feature. Finished in a polished silver and gloss black two-tone combination, these vent slat inserts slot cleanly into the existing bonnet vent cutouts and replicate the appearance of the Velar's premium Dynamic specification. The contrast between the silver slats and black surround picks out the geometry of the vent with precision, adding visual depth and a purposeful, performance-orientated character without altering the vehicle's original lines. Manufactured from high-grade ABS polymer with a mirror-quality surface finish, these trims are built to resist UV fading, temperature cycling, and the general rigours of daily driving. Installation requires no tools, no adhesive mixing, and no professional fitting — just a clean surface, a few minutes, and the confidence that the result will look factory-correct from day one. What's Included 🔲 Hood Vent Slat Trims (x2) Left and right silver & black inserts for both bonnet vents 📎 Pre-Applied 3M Adhesive Tape High-bond automotive-grade backing, factory-applied to each trim 🧹 Surface Prep Wipe Alcohol cleaning wipe to ensure a clean bond prior to fitting 📄 Fitting Instructions Step-by-step guide included in the box Product Highlights Designed specifically for the Range Rover Velar 2017–2019 bonnet vent apertures Two-tone silver and gloss black finish for a Dynamic Edition aesthetic High-grade ABS construction — resistant to UV, heat, and road vibration Pre-applied 3M automotive adhesive — no separate bonding agents required Tool-free installation completable in under 15 minutes Precision-cut for flush, factory-correct fitment — no gaps or proud edges Does not interfere with bonnet vent function or airflow Non-permanent — fully removable without damage to paintwork Available in three colourways: Silver/Black, Rose Gold, and Full Black Supplied as a complete pair — fits both left and right vents simultaneously Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar (L560) 2017 – 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020 – 2022 All trims Verify Before Purchase Range Rover Evoque (L551) 2019 – 2024 All trims Not Compatible Range Rover Sport (L494) 2013 – 2022 All trims Not Compatible Range Rover Vogue (L405) 2013 – 2021 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and allow the bonnet to cool fully to ambient temperature before beginning installation. Use the included alcohol prep wipe to thoroughly clean the surface of each bonnet vent aperture. Remove all wax, polish residue, and road film. Allow to dry completely — approximately 60 seconds. Test-fit each vent slat trim against its corresponding aperture without removing the adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first trim. Position carefully within the vent aperture, starting from the centre and working outward. Apply firm, even pressure across the full length of the trim for a minimum of 30 seconds to activate the adhesive bond. Repeat for the second vent slat trim on the opposite side. Allow 24 hours before washing the vehicle or exposing the bonnet to heavy rain, to allow the adhesive to reach full cure strength. ⚠ Note: Do not attempt installation in direct sunlight or when ambient temperature is below 10°C, as this will reduce adhesive performance. For best results, install indoors or in a shaded area with a surface temperature between 15°C and 35°C. Complete the Look on Your Velar Explore the full Victorious range of exterior styling accessories for the Range Rover Velar — from mirror caps and grille surrounds to side vents and door trims. Everything you need to finish the build, in one place. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. All rights remain with their respective owners.

Tesla · Model X & S · Interior Accessories Tesla Model X & S Central Cup Holder Box — Premium Center Console Organizer Transform your Tesla's center console into an organized, clutter-free storage hub with this precision-engineered organizer tray. Model X Model S 2016–2019 Durable Plastic Easy Install Overview If you own a Tesla Model X or Model S, you know how quickly your center console can become cluttered with loose items, cables, and personal belongings. The standard cup holder setup leaves little room for thoughtful storage, and your dashboard loses its premium feel when items are scattered about. Our Central Cup Holder Box is engineered specifically for the Model X and Model S interior layout. This organizer tray fits seamlessly into your center console, providing dedicated compartments and additional storage capacity without compromising the factory design aesthetic. The sleek black finish matches your vehicle's minimalist interior perfectly. Built from durable, temperature-resistant plastic and certified to ISO9001 standards, this organizer keeps your essentials—coins, cards, small chargers, and accessories—neatly contained and within reach. Installation is tool-free and reversible, taking just minutes to fit into place. What's Included 📦 Central Cup Holder Box 1x organizer tray Product Highlights Direct fit for Tesla Model X (all years 2016–2019) Direct fit for Tesla Model S (all years 2016–2019) Durable, temperature-resistant plastic construction Multiple compartments for organized storage ISO9001 certified manufacturing Black finish integrates seamlessly with interior Tool-free installation and removal Lightweight at 200g—no added bulk Compact 30 × 20 × 10 cm dimensions Keeps center console clutter-free and premium Compatibility Model Year Range Compatibility Tesla Model X 2016–2019 Direct Fit Tesla Model S 2016–2019 Direct Fit Tesla Model X 2020+ Not Compatible Tesla Model S 2020+ Not Compatible Important: Please verify your vehicle's production year before purchase. Models produced from 2020 onwards feature a redesigned center console with different dimensions and layout. Installation Notes Difficulty: Easy | Time: 5 minutes Remove any items currently in your center console cup holder area. Position the organizer tray into the center console cavity, aligning the edges with the surrounding trim. Gently press down until the organizer sits flush and secure. Test by adding light items to ensure stability and fit. Arrange your daily essentials in the dedicated compartments. Note: The organizer is not adhered to the console; it rests securely by gravity and friction. If you remove it, ensure you clean both the tray and console surface to maintain a secure, rattle-free fit. Avoid placing heavy or sharp items in the compartments, as they may warp the plastic over time. Shop with Confidence We stand behind every product with a 30-day money-back guarantee. If this organizer doesn't meet your expectations, we'll refund you in full. Thousands of Tesla owners trust Victorious Automotive for premium interior upgrades. View More Tesla Accessories Use discount code 22GET20 for 20% off any 2 items in your order. ⭐ 4.9/5 stars – 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 Expert support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Tesla, Inc. or Tesla Motors. All product names, logos, and brands are property of their respective owners. This product is an aftermarket accessory designed for compatibility with the vehicles listed above.

Tesla · Model 3 · Interior Protection Door Lock Cover Rust Protection – Tesla Model 3 Premium chrome and carbon fiber covers that shield your Model 3's door locks from rust and environmental wear while maintaining a refined, factory-matched aesthetic. Model 3 2017–2024 Chrome & Carbon Fiber Interior Protection Set of 4 Overview Your Tesla Model 3 deserves protection against the daily elements that accelerate wear. Door lock mechanisms are vulnerable to moisture, salt, and oxidation—especially in coastal or winter-driven regions. Over time, exposed locks develop rust and corrosion, compromising both function and curb appeal. Our Door Lock Cover set delivers professional-grade protection in two premium finishes: polished chrome for a classic, elegant look, or carbon fiber for modern performance aesthetics. Each cover is engineered to fit seamlessly within your Model 3's existing design language, maintaining the clean lines that define the vehicle. Installation is straightforward and requires no modification to your door assembly. With proper fitment, these covers provide continuous defence against moisture ingress, salt spray, and UV degradation—extending your lock mechanisms' operational lifespan and preserving resale value. What's Included 🛡️ Set of 4 Covers One per door lock ✨ Dual Finish Options Chrome or carbon fiber 📋 Installation Guide Step-by-step instructions 🔒 Easy Attachment No tools or drilling required Product Highlights Advanced rust and corrosion prevention for extended lock life High-grade chrome or authentic carbon fiber finishes Seamless design integration with Model 3 factory aesthetics UV-resistant materials resist fading and discoloration Tool-free installation in minutes per door Waterproof construction prevents moisture infiltration Factory-matched fitment eliminates gaps and rattles Protects resale value by maintaining lock assembly integrity Lightweight, non-invasive design preserves door functionality Works with all Model 3 lock types and handle designs Compatibility Tesla Model 3 Variant Model Years Status Model 3 Standard Range 2017–2024 Direct Fit Model 3 Long Range 2017–2024 Direct Fit Model 3 Performance 2017–2024 Direct Fit Model 3 RWD (2023+) 2023–2024 Direct Fit Model Y (Any Variant) 2020+ Not Compatible Compatibility Tip: Confirm your vehicle's production year and trim variant before ordering. All standard, long-range, and performance Model 3 variants built between 2017–2024 are compatible with this set. Installation 📦 Difficulty: Beginner | Time: 15–20 minutes Prepare the area: Clean all four door lock mechanisms with a soft, dry cloth to remove dust and debris. Ensure surfaces are completely dry before attachment. Check alignment: Hold each cover against its corresponding lock to verify proper fit. Covers should sit flush without gaps or overhang. Apply adhesive backing: If covers feature pre-applied adhesive, carefully remove the protective film. For mechanical fastening, align mounting points with lock housing. Secure the cover: Press firmly into place for 10–15 seconds per cover, ensuring full contact across all edges. Do not over-torque fastening points. Final inspection: Verify that all four covers are level, secure, and visually aligned. Test door lock actuation to confirm no interference with mechanism operation. Allow curing: If adhesive-backed, allow 24 hours before exposing covers to moisture or high-use conditions. Note: Do not force covers if fitment feels tight. Forcing can crack the cover or damage the lock assembly. If resistance is encountered, stop and inspect alignment. Protect Your Model 3. Elevate Its Presence. Door lock covers are a small detail with outsized impact. They're the difference between a lock mechanism that deteriorates and one that endures. Order now and lock in superior protection—backed by our 30-day, no-questions-asked guarantee. Shop Model 3 Protection Use code 22GET20 for 20% off when you buy 2 or more items. ⭐ 4.9 / 5 stars from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✅ 30-day guarantee – full refund, no hassle 📞 +44 203 943 9919 – Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Tesla, Inc., Elon Musk, or any official Tesla subsidiary. Tesla is a registered trademark of Tesla, Inc. All vehicle names, logos, and specifications are used solely for compatibility and reference purposes. Product descriptions and claims are the responsibility of Victorious Automotive and do not reflect official Tesla product standards or support.

Tesla · Model 3 · Interior Accessories Tesla Model 3 Center Console Wrap Mat – Non-Slip Protective Cup Holder Pad Premium protection and style for your Model 3's center console with glow-in-the-dark functionality and wear-resistant design. Model 3 2017–2024 Carbon Fiber Latex Non-Slip Design Glow-in-Dark 7-Piece Set Overview The Tesla Model 3's center console is exposed to daily wear—from fingerprints to spills to UV fading. This comprehensive 7-piece protective wrap mat set shields your console, cup holder, and gate slot areas from damage while maintaining the clean, minimalist aesthetic Tesla owners demand. Engineered from premium carbon fiber-textured latex compound, these mats deliver a factory-quality fit and glow-in-the-dark visibility for nighttime driving comfort. The non-slip surface keeps your phone, wallet, and drink secure, while the wear-resistant material resists scratches and discoloration over years of use. Choose from white, red, or blue color combinations to match your interior theme. Whether you're protecting an investment or personalizing your cabin, this set offers both function and visual upgrade in one simple installation. What's Included 🛡️ 7-Piece Mat Set Complete center console coverage ☕ Cup Holder Pads Anti-slip protection for beverages 🚪 Gate Slot Mats Defined console pocket coverage ✨ Glow-in-Dark Tech Nighttime visibility enhancement Product Highlights Non-slip latex surface keeps items secure during acceleration and braking Carbon fiber texture matches modern EV interior design language Glow-in-the-dark material enhances visibility during evening drives Wear-resistant compound resists scratches, spills, and UV fading Perfect factory-fit for Model 3 center console architecture Available in white, red, or blue color combinations Easy peel-and-stick installation—no tools required Durable for long-term daily use without degradation Protects original console finish from fingerprints and damage 30-day money-back guarantee if not satisfied Compatibility Tesla Model 3 Generation Model Year Range Compatibility Model 3 (Standard Range) 2017–2024 Direct Fit Model 3 (Long Range) 2017–2024 Direct Fit Model 3 (Performance) 2017–2024 Direct Fit Model 3 Highland (2024+) 2024+ Not Compatible Model Y / S / X All Years Not Compatible Installation Notes ⚡ Installation Difficulty: Beginner Estimated Time: 10–15 minutes | Tools Required: None Clean the center console and cup holder areas thoroughly with a dry microfiber cloth. Remove any dust or debris. Peel the backing from the first mat piece, starting with the main console wrap. Align the mat with the console edge and press firmly, working from center outward to avoid air bubbles. Apply cup holder pads next, centering them in each receptacle for maximum coverage. Install gate slot mats by carefully positioning them along the defined pocket edges and pressing to secure. Allow 24 hours of cure time before placing heavy items on the mats for optimal adhesion. Important: Color variations may occur due to lighting conditions in photography. The glow-in-the-dark effect requires ambient light exposure to activate. Verify your Model 3 year matches compatibility before purchase—Highland models (2024+) feature a redesigned console. Protect Your Tesla Model 3 Interior Today Transform your center console from fingerprint magnet to showroom-quality protected surface. With glow-in-the-dark functionality, non-slip grip, and factory-matched fit, these mats are the simplest upgrade for Model 3 owners who demand both style and durability. Shop Model 3 Accessories Use code 22GET20 for 20% off any 2 items. Worldwide shipping via DHL, FedEx, UPS, TNT. 4.9/5 — 12,300+ Verified Reviews ✓ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Expert Support Victorious Automotive is an independent accessory specialist and is not affiliated with Tesla, Inc., or its subsidiaries. All product names and trademarks are the property of their respective owners. This description is for compatibility and informational purposes only.

Mini Cooper · R55–R61 · Interior Trim Union Jack Tachometer Cover Sticker for Mini Cooper Premium ABS tachometer cover with iconic Union Jack design—adds British character to your dash in seconds. R55 Clubman R56 Hatch R57 Convertible R58 Coupe R59 Roadster R60 Countryman R61 Paceman ABS Plastic Center Console Easy Install Overview Built for Mini Cooper enthusiasts who refuse to compromise on character, this Union Jack tachometer cover combines authentic British heritage with premium fitment. Whether you're running an R55 Clubman, R56 Hatch, or newer R60 Countryman, this sticker instantly elevates your interior with iconic flag graphics that resonate with the Mini brand DNA. Manufactured from durable ABS plastic and engineered for precise center console placement, this cover adheres cleanly to your tachometer surround without gaps or lifting. The design is laser-cut for exact fitment—no trimming, no guesswork. Multiple colorways let you match your personality: Union Jack red-white-blue, grey variants, checkered patterns, gold, or stealth black. Installation takes under five minutes and requires no tools. Simply clean the surface, peel and stick, and enjoy the transformation. This is the fastest way to personalize your Mini's interior while preserving factory aesthetics. What's Included 📦 Tachometer Cover Sticker 1× Union Jack design, pre-cut ABS ✓ Color Options Union Jack, Grey Jack, Checker, Gold, Black 🧼 Installation Ready Clean, peel, stick—no tools needed ⚡ Fit Guarantee Precision engineered for your model Product Highlights Universal Fitment: R55 Clubman through R61 Paceman—all generations supported Premium ABS Material: Rigid, UV-resistant, won't yellow or peel Precise Center Console Placement: Aligns perfectly with factory tachometer surround 5 Color Variants: Union Jack, Grey Jack, Checkered, Gold, and Black finishes Tool-Free Installation: Adhesive backing—clean, peel, and stick in under 5 minutes Laser-Cut Accuracy: No trimming required; designed for exact fitment Factory-Look Finish: Integrates seamlessly with OEM interior design language Durable & Long-Lasting: Resists sun, heat, and moisture without degradation Wholesale Available: Bulk ordering supported for dealers and customizers Iconic Design: Celebrates Mini's British heritage with bold, recognizable graphics Compatibility Model Generation Year Range Fitment Mini Cooper R55 Clubman 2nd Gen 2007–2014 Direct Fit Mini Cooper R56 Hatch 2nd Gen 2006–2014 Direct Fit Mini Cooper R57 Convertible 2nd Gen 2008–2015 Direct Fit Mini Cooper R58 Coupe 2nd Gen 2011–2015 Direct Fit Mini Cooper R59 Roadster 2nd Gen 2012–2015 Direct Fit Mini Cooper R60 Countryman 2nd Gen 2010–2017 Direct Fit Mini Cooper R61 Paceman 2nd Gen 2013–2016 Direct Fit Mini Cooper R50/R52 (1st Gen) 1st Gen 2001–2007 Not Compatible Mini Cooper F56/F57 (3rd Gen) 3rd Gen 2014+ Not Compatible Installation Notes Difficulty: Beginner | Time: 5 minutes | Tools: None Inspect Placement: Open your Mini's center console and locate the tachometer surround. Verify the area is clear of obstructions and flush against the dash. Clean the Surface: Use a soft, dry cloth to wipe down the tachometer area. Remove any dust, oils, or residue—clean adhesion is critical for long-term durability. Position the Sticker: Carefully align the cover sticker with the tachometer opening. Start at the top center and work your way down, smoothing as you go. Apply Adhesive: Peel back the backing slowly and press firmly across the entire surface. Use a squeegee or credit card to eliminate air bubbles and ensure full contact. Cure Time: Allow 24 hours before operating the vehicle for maximum adhesion strength. Tip: If you make a mistake during application, carefully peel back the sticker and reposition. The ABS material is durable—gentle repositioning won't damage it. Own Your Mini's Interior Transform your dashboard in minutes with authentic Union Jack character. Choose your color, stick it, and celebrate the British spirit of Mini Cooper. Shop Tachometer Covers Now Apply code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mini Cooper, BMW Group, or Mini Car Ltd. All product names and vehicle model designations are used for compatibility and reference purposes only. Mini and Mini Cooper are registered trademarks of their respective owners.

Premium Automotive · Mini Cooper · Exterior Hood Stripe Decal Stickers for Mini Cooper S Premium adhesive stripe decals designed to elevate your Mini Cooper's front-end styling with a bold, eye-catching hood graphic in your choice of colours. Mini Cooper S R55–F60 Hood / Head Stripe Peel & Stick KK Material Customizable Colour Overview Mini Cooper owners demand distinctive styling that reflects their personality and driving spirit. These premium hood stripe decals are engineered to transform your Mini Cooper S's front end with sharp, professional-grade graphics that command attention on every drive. Whether you own an R55 Clubman, R56 hatchback, R57 convertible, R60 Countryman, or any generation through the current F55, F56, F57, and F60 models—these stickers deliver authentic visual impact without compromising paint or finish. Constructed from premium KK material, these decals resist UV degradation, heat exposure, and moisture ingress for years of flawless appearance. The colour-change design technology ensures vibrant, fade-resistant graphics across all lighting conditions. Installation requires no tools, specialist knowledge, or lengthy downtime—simply clean, peel, position, and press. Perfect for owners seeking affordable, reversible exterior customization. Unlike generic vinyl, our hood stripe decals are laser-cut to precise OEM specifications and engineered for direct fitment on all Mini Cooper S variants. The adhesive formulation ensures clean removal without residue or surface damage, making this the ideal upgrade for enthusiasts who value both impact and reversibility. What's Included 🎨 Hood Stripe Decal (1x) Premium KK vinyl, colour-change design 🔧 Installation Guide Step-by-step peel & stick instructions ✨ Transfer Tape Precision application, residue-free removal 🛡️ 30-Day Guarantee Money-back assurance, no questions asked Product Highlights Premium KK Material: UV-resistant, temperature-stable, moisture-proof vinyl Colour-Change Design: Dynamic visual effect across all light conditions OEM-Spec Fitment: Laser-cut precision for R55–F60 Mini Cooper S models Peel & Stick Installation: No tools, no specialist knowledge required Heat & Sunlight Resistant: Maintains colour integrity for years Reversible Application: Clean removal without adhesive residue or paint damage Head/Hood Placement: Bold front-end styling enhancement Multiple Colour Options: Customizable finishes to match your aesthetic Professional Appearance: Factory-quality graphics at accessory pricing Instant Impact: One-piece installation, immediate visual transformation Compatibility Matrix Model Generation Years Fit Status Mini Cooper S Clubman R55 2007–2014 Direct Fit Mini Cooper S Hatchback R56 2006–2014 Direct Fit Mini Cooper S Convertible R57 2009–2015 Direct Fit Mini Cooper S Countryman R60 2010–2017 Direct Fit Mini Cooper S Clubman R61 2015–2023 Direct Fit Mini Cooper S Clubman F54 2014–2023 Direct Fit Mini Cooper S Hatchback F55 2014–2023 Direct Fit Mini Cooper S Convertible F57 2015–2023 Direct Fit Mini Cooper S Countryman F60 2017–2023 Direct Fit Mini Cooper F56 F56 2014–2023 Direct Fit Installation Notes Difficulty Level: Beginner | Time Required: 15–20 minutes Clean the surface: Wash your Mini Cooper's hood thoroughly with mild soap and water. Dry completely using a microfibre cloth to remove all moisture, dust, and residue. Position the transfer tape: Carefully peel the backing layer away from the decal, ensuring the vinyl remains adhered to the clear transfer tape throughout removal. Mark placement: Hold the sticker against your hood in your desired location. Use a ruler or measuring tape to ensure centring if desired. Mark reference points lightly with masking tape. Apply the decal: Slowly lower the transfer tape and decal onto the hood, starting from one end and working toward the other to avoid air bubbles. Smooth and press: Use a credit card, squeegee, or soft plastic tool to gently smooth the decal onto the surface, pressing firmly from the centre outward. Remove transfer tape: Allow the adhesive 2–3 minutes to set. Carefully and slowly peel away the clear transfer tape at a low angle, leaving the vinyl decal in place. Final check: Inspect the edges and corners to ensure full adhesion. Press down any areas that may have lifted. Note: Apply this decal in temperatures above 10°C for optimal adhesion. Avoid high-pressure washing for the first 48 hours to allow the adhesive to fully cure. Elevate Your Mini Cooper S Today Transform your Mini's front end with premium hood stripe decals engineered for lasting impact, flawless fitment, and effortless installation. Choose your colour, apply with confidence, and drive with pride. View Full Collection Use code 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 Stars ✓ 12,300+ Reviews 🚚 Worldwide Delivery 🛡️ 30-Day Guarantee Victorious Automotive is an independent accessory specialist. We are not affiliated with, endorsed by, or connected to Mini, BMW Group, or any official Mini manufacturer. All vehicle names and model designations are used for identification and compatibility purposes only. Please verify fitment with vehicle documentation before purchase.

Victorious Automotive · Land Rover Discovery 4 · Infotainment & Navigation Android Infotainment System – Land Rover Discovery 4 LR4 L319 (2009–2016) A direct-fit 7-inch Android head unit engineered specifically for the Discovery 4 LR4 L319, delivering GPS navigation, Bluetooth, Wi-Fi, and 1080p HD media in a clean, factory-style double-DIN install. L319 2009–2016 Android OS 7" 1080p HD Double DIN Built-in GPS Bluetooth Wi-Fi Steering Wheel Control DALH-8735 Liandlee 12V Overview The Land Rover Discovery 4 LR4 (L319) is one of the most capable and enduring mid-size SUVs ever produced — a vehicle equally at home navigating Mayfair as it is tackling a Welsh ridge line. But factory infotainment from the 2009–2016 production run has aged considerably, leaving owners with slow sat-nav, limited smartphone integration, and an audio experience that doesn't match the rest of the vehicle's character. This Android head unit from Liandlee (model DALH-8735) is purpose-built to fit the Discovery 4's double-DIN aperture as a seamless, factory-style replacement. Running Android on a 1.6GHz processor with 1GB RAM and 16GB ROM, it transforms the cabin into a genuinely modern connected environment — with full GPS navigation, Bluetooth audio and hands-free calling, Wi-Fi connectivity, AM/FM/RDS radio, and Mirror Link for both iOS and Android devices. The 7-inch 1080p HD capacitive touchscreen integrates cleanly with your Discovery 4's existing steering wheel controls and retains support for USB, SD card, and multi-format media playback. Available in multiple interface languages including English, French, German, Spanish, Italian, Russian, and Arabic, this is a genuine upgrade built to the standard this vehicle deserves. What's Included 📺 7" Android Head Unit DALH-8735 · Double DIN · 1080p HD display 🔌 Vehicle Wiring Harness Direct-fit plug for Discovery 4 L319 📡 GPS Antenna External mount for optimal signal reception 📻 Radio Antenna Adapter Retains AM/FM/RDS antenna connection 🎙️ Built-in Microphone Integrated for hands-free calling 🔧 Mounting Hardware Brackets and fascia trim surround 📄 Installation Guide Step-by-step printed instructions Product Highlights 7-inch capacitive touchscreen at full 1080p HD resolution for sharp, responsive interaction Android operating system with 1.6GHz processor, 1GB RAM and 16GB onboard ROM Built-in GPS navigation — works offline, no subscription required Bluetooth hands-free calling and A2DP wireless audio streaming Wi-Fi connectivity for app updates, streaming, and Google Maps live traffic Steering wheel control compatibility — retain your existing controls without adapters AM / FM / RDS radio tuner with station name display Mirror Link support for screen mirroring from iOS and Android smartphones USB and SD card inputs with support for MP3, MP4, WMA, JPEG and Video CD formats Multi-language OSD: English, French, German, Spanish, Italian, Russian, Arabic Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 LR4 L319 2009 – 2016 Direct Fit Discovery 4 with factory CD/DVD player L319 2009 – 2016 Direct Fit Discovery 4 with factory OEM navigation system L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 predecessor 2004 – 2009 Not Compatible Land Rover Discovery 5 L462 2017 – present Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Trim removal tools, screwdrivers Disconnect the vehicle battery before beginning any wiring work to prevent electrical faults. Using plastic trim removal tools, carefully prise away the centre console surround panel around the existing head unit — work from the edges inward to avoid scratching the fascia. Remove the factory head unit by unscrewing the mounting bolts (typically four screws in the double-DIN cage) and slide the unit forward to disconnect the existing wiring looms. Connect the supplied vehicle-specific wiring harness to the Android unit, matching each connector. Plug in the GPS antenna cable and route it toward the windscreen or dashboard for signal clarity. Connect the radio antenna adapter to retain AM/FM reception, and route the microphone cable to a discreet position near the driver's sun visor or A-pillar. Slide the new unit into the double-DIN aperture and secure with the provided mounting brackets. Reattach the fascia trim surround and centre console panel. Reconnect the vehicle battery, power on the unit, and confirm GPS lock, Bluetooth pairing, radio reception, and steering wheel control functionality before finalising the installation. Important: This unit is designed to replace factory CD or DVD player configurations only. It is not compatible with vehicles fitted with the original Land Rover factory navigation system. If you are unsure of your current head unit configuration, please contact us at +44 203 943 9919 or send a photograph of your interior before ordering. We are unable to accept returns on incorrectly ordered units once despatched. Upgrade Your Discovery 4 Infotainment Browse our full range of Land Rover Discovery 4 accessories and interior upgrades, curated for owners who demand the best from their L319. Shop Discovery 4 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious · Mercedes-Benz · Exhaust Trim Glossy Black Stainless Steel Exhaust Muffler Trim for Mercedes GLA X156 Elevate your GLA's rear end with premium gloss black stainless steel exhaust trim—no drilling, adhesive installation. GLA X156 2013–2019 Stainless Steel Glossy Black Exhaust Trim Adhesive Install Overview Your Mercedes-Benz GLA Class X156 deserves a rear end that matches its understated elegance. This Glossy Black Stainless Steel Exhaust Muffler Trim transforms the rear bumper area with a dynamic, high-end finish—the kind you'd find on premium models. Crafted from premium stainless steel and finished in deep gloss black, it catches light beautifully and demands attention. Installation couldn't be simpler. Using advanced adhesive technology, this trim pairs arrive ready to bond directly to your existing exhaust—no drilling, no permanent modifications. Heat the adhesive for optimal grip, apply, and you're done. The sleek design protects your original exhaust while adding visual depth and sophistication to your vehicle's profile. Perfect for owners who understand that details matter. This is a straightforward, reversible upgrade that delivers premium-level impact without the premium-level hassle. What's Included ⚙️ Muffler Trim Pair Left and right gloss black stainless trim 🧴 Premium Adhesive High-strength bonding solution included 📖 Installation Guide Step-by-step instructions with heat activation notes Product Highlights Premium stainless steel construction for durability Deep gloss black finish—no chrome, pure attitude Direct fit design for GLA X156 (2013–2019) Adhesive installation—zero drilling required Protects original exhaust from wear Heat-activated adhesive for optimal bonding Reversible—remove cleanly if needed Pair installation—both sides included Professional finish elevates rear appearance Lightweight, weather-resistant material Compatibility Mercedes Model Generation Years Fit GLA Class X156 (1st Gen) 2013–2019 Direct Fit GLA Class H247 (2nd Gen) 2020+ Not Compatible GLC Class C253 2015+ Not Compatible GLE Class W167 2020+ Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 minutes Clean the exhaust area. Use a microfiber cloth and mild soap to remove dirt, grease, and residue. Ensure the surface is completely dry. Heat the adhesive. Apply gentle heat (using a heat gun on low setting, 30–40°C) to the adhesive backing for 2–3 minutes until it becomes tacky. Position the trim. Carefully align the left trim first, centering it over your exhaust outlet. Press firmly for 10–15 seconds. Repeat for the right side. Install the right trim using the same method, ensuring both trims sit symmetrically. Allow to cure. Let the adhesive set for a full 24 hours before driving. Avoid washing your vehicle during this period. Check alignment. Once cured, ensure both trims sit flush and evenly spaced. Minor adjustments can be made by gently lifting and repositioning if needed (within the first 2 hours). Important: Do not expose the vehicle to extreme heat or heavy water pressure for 48 hours after installation. This allows the adhesive to fully cure and bond permanently. Ready to Finish Your GLA? Upgrade your Mercedes GLA X156 with the premium gloss black exhaust trim that delivers real presence. Easy install, permanent impact. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ 4.9/5 stars — 12,300+ verified reviews ✓ +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes brand entity. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket fitment only.

```html Victorious · Mercedes GLA · Exhausts Chrome Exhaust Muffler Cover for Mercedes-Benz GLA Class X156 (2014–2020) Premium stainless-steel muffler cover that elevates your GLA's rear styling with a sophisticated chrome finish. X156 2014–2020 Stainless Steel Chrome & Black No Drilling Overview The Mercedes-Benz GLA Class X156 is a sophisticated compact SUV that commands presence on every road. Our chrome exhaust muffler cover is engineered to enhance that visual impact by transforming the rear profile with premium-grade styling. Crafted from high-quality stainless steel, this muffler pipe cover delivers a luxury finish that complements the GLA's modern design language. Available in polished chrome or high-gloss black, the cover catches light and draws the eye exactly where it should—your vehicle's bold rear end. Installation is straightforward and non-invasive: our advanced adhesive tape system requires no drilling, cutting, or permanent modifications. The bond is durable, weather-resistant, and reversible if you ever wish to remove it. What's Included 📦 1 Pair of Muffler Covers Stainless steel, pre-finished 🔧 High-Grade Adhesive Tape Professional automotive spec 📋 Installation Guide Step-by-step instructions included Product Highlights Stainless steel construction resists rust and corrosion Available in chrome or high-gloss black finish No drilling, cutting, or vehicle modification required Professional-grade adhesive tape for secure, long-term hold Easy installation in under 15 minutes Weather-resistant and UV-stable coating Direct fit for X156 models (2014–2020) Transforms rear styling without compromising function Reversible installation—remove anytime without residue Heat activation improves adhesion and durability Compatibility Model Year Range Fit Mercedes-Benz GLA Class 2014–2020 (X156) Direct Fit Mercedes-Benz GLA Class 2021+ (X157 / H247) Not Compatible Other Mercedes models All years Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Prepare the surface: Clean both the muffler pipes and the rear of the cover with soap and water. Dry completely with a soft cloth. Position the cover: Align the muffler cover over the exhaust pipe outlet, ensuring a flush, centered fit. Apply adhesive: Peel back the tape backing and press the cover firmly onto the muffler. Apply even pressure across the entire surface for 30 seconds. Heat activation (recommended): Use a heat gun or hair dryer on medium setting, warming the adhesive for 1–2 minutes. This dramatically improves long-term bond strength. Cure time: Allow 24 hours before exposing the vehicle to moisture or high temperatures. Final check: Inspect all edges and ensure the cover is secure. No gaps should be visible. Important: Apply heat to the adhesive for optimal adhesion and durability. Ensure the muffler is completely cool before installation. Do not apply in temperatures below 10°C or above 35°C. Elevate Your GLA's Presence Premium chrome styling meets practical installation. Our exhaust muffler cover transforms your Mercedes-Benz GLA's rear end with zero compromise—no drilling, no hassle, just a sharper, more refined look. Shop Exhaust Covers Save 20% on any 2 items with code 22GET20 4.9/5 stars from 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler AG, or any official Mercedes distributor. All product names and trademarks remain the property of their respective owners. This product is an aftermarket accessory designed for fitment; fitment and performance may vary by vehicle condition and installation quality. ```

Jaguar · F-PACE X761 · Interior Storage Interior Storage Box & Cup Holder Tray — Jaguar F-PACE X761 Compact, precisely fitted storage solution for coins, cards, and daily essentials—keeps your cabin organised without fuss. X761 / XFL 2016–2017 Premium Plastic Direct Fit Black OEM Integration Overview The Jaguar F-PACE (X761 / XFL, 2016–2017) deserves storage that matches its refined interior. This purpose-built storage box and cup holder tray integrates seamlessly into your cabin, providing practical organisation without disrupting the cabin's clean aesthetic. Manufactured in high-grade plastic with ISO9001 quality assurance, this tray holds small items—coins, credit cards, receipts, name cards—exactly where you need them. It's designed to slot directly into your F-PACE's interior architecture, requiring no modification to the vehicle. For owners who value both function and finish, this is the understated solution that transforms wasted cabin space into usable storage. Every detail has been engineered for your F-PACE. What's Included 📦 Storage Box Tray Full-sized cup holder + storage compartment ⚙️ Mounting Hardware Pre-fitted for F-PACE integration 📋 Installation Guide Quick-reference instructions included ✓ Quality Certified ISO9001 standard compliance Product Highlights Dedicated cup holder + coin/card storage in one unit High-grade moulded plastic construction (50g, compact design) ISO9001 quality certified for durability Black finish matches F-PACE interior trim Direct fit—no modifications required Holds credit cards, receipts, coins, name cards Precisely engineered for X761 / XFL models Easy installation in under 10 minutes Maintains original cabin aesthetics Perfect complement to F-PACE interior upgrades Compatibility Model Year Code Fitment Jaguar F-PACE 2016 X761 Direct Fit Jaguar F-PACE 2017 X761 / XFL Direct Fit Other Jaguar Models — — Not Compatible Installation Notes Difficulty: Beginner | Time: 5–10 minutes Locate the designated storage compartment in your F-PACE's interior cabin area (typically centre console or upper dashboard section). Unpack the tray and verify all components match your vehicle's year code (X761 or XFL). Align the mounting tabs with the factory mounting points. No tools required—friction fit. Press firmly until the tray seats fully. You should hear a soft click indicating secure installation. Test stability by gently pressing on the tray from multiple angles. It should not shift. Place coins, cards, or small items into the storage compartment to confirm capacity. Note: This tray integrates into existing cabin architecture. If your F-PACE has been heavily modified or has aftermarket interior trim, verify compatibility before installation. In rare cases, minor trim adjustment may be needed—proceed carefully. Complete Your F-PACE Interior Storage, organisation, and class—all in one compact piece. This tray is the subtle upgrade that makes daily driving more refined. Order now and transform your cabin. Shop F-PACE Accessories Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews 🌍 Worldwide shipping ✓ 30-day guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar, Jaguar Land Rover, or any OEM manufacturer. All vehicle names and codes are used for identification purposes only. Always verify fitment with your vehicle's VIN or chassis code before purchase.

Victorious Automotive · Range Rover Velar · Exterior Styling R-Dynamic Side Vent Fender Trim for Range Rover Velar 2017–2020 — 4-Piece Set Give your Velar the aggressive R-Dynamic fender vent aesthetic with a precision-fit, peel-and-stick trim upgrade that installs in minutes and lasts for years. Range Rover Velar 2017–2020 High-Grade ABS R-Dynamic Look Rose Gold / Black 4-Piece Set No Drilling Required Peel & Stick Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — a cab-forward silhouette, flush door handles, and a cabin experience that punches well above its class. But for owners who want to push that aesthetic further, the standard side fender treatment can feel understated. The R-Dynamic trim line addresses that with purposeful, sculpted side vents that add visual tension and sporting intent to the bodywork. These R-Dynamic Side Vent Fender Trims are precision-manufactured from high-grade ABS plastic and finished to complement the Velar's sharp lines. Offered in Rose Gold and Gloss Black, each finish is designed to either contrast boldly against lighter paint codes or integrate seamlessly with darker hues like Santorini Black and Narvik Black. The set includes four individual vent trim pieces — two per side — mirroring the factory R-Dynamic specification. Installation requires no specialist tools, no drilling, and no permanent modification to your vehicle. The 3M-grade adhesive backing bonds firmly to the factory fender surface, and a brief pass with a hairdryer activates the adhesive for a stronger, longer-lasting hold. Whether you're building a full exterior detail package or simply want one impactful upgrade, these fender vents deliver genuine visual transformation for a fraction of the cost of factory R-Dynamic bodywork. What's Included 🔲 Front Fender Vents × 2 One per side, left and right matched pair 🔲 Rear Fender Vents × 2 One per side, left and right matched pair 🩹 3M Adhesive Tape Pre-applied to each piece — no extras needed 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Replicates factory R-Dynamic side vent styling High-grade ABS plastic construction throughout Available in Rose Gold and Gloss Black finishes Complete 4-piece set — full vehicle coverage Pre-applied 3M-grade adhesive on every piece No drilling, cutting, or permanent modification Heat-activated adhesive for a stronger bond Precision-matched to Velar fender contours UV-resistant finish — won't fade or discolour Compatible with all trim levels, 2017–2020 Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S, SE, HSE, First Edition Direct Fit Range Rover Velar 2017–2020 R-Dynamic S, R-Dynamic SE, R-Dynamic HSE Direct Fit Range Rover Velar 2021–2024 All Variants (facelift) Verify Before Purchase Range Rover Sport L494 2013–2022 All Variants Not Compatible Range Rover Vogue L405 2013–2021 All Variants Not Compatible Defender L663 2020–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None (hairdryer recommended) Dry-fit first. Hold each vent trim piece against its intended fender position before committing. Confirm orientation and alignment against the bodywork contour. Clean the surface. Thoroughly clean and degrease the fender area using an isopropyl alcohol wipe or panel wipe. Ensure the surface is completely dry before proceeding. Any residue will compromise the adhesive bond. Warm the adhesive. Peel the protective backing from the 3M tape. Using a hairdryer on a low-to-medium setting, gently warm the adhesive tape for 10–15 seconds. This activates the adhesive and significantly improves long-term bonding strength. Apply with firm pressure. Position the vent trim carefully and press it onto the cleaned surface with firm, even pressure for at least 30 seconds. Work from the centre outward to avoid air pockets. Allow cure time. Leave the vehicle undisturbed for a minimum of 24 hours before washing or exposing to rain, allowing the adhesive to fully cure to the bodywork. Installation complete. Repeat for all four pieces and step back to enjoy the transformation. ⚠ Important: Do not attempt installation in cold temperatures below 10°C — the adhesive will not bond effectively. Always warm the surface and tape before application. Avoid fitting in direct sunlight as this may cause the tape to set before correct positioning is achieved. Complete Your Velar's Exterior Browse our full Range Rover Velar styling collection — from bonnet trims and mirror caps to front grille surrounds and door handle covers. Every part is handpicked for fit, finish, and longevity. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product images are representative; actual finish may vary slightly between production batches. Always verify compatibility with your specific vehicle configuration before purchase. For fitment queries, contact our team at +44 203 943 9919.

Victorious · Mercedes · Front Grille Mercedes C-Class W204 Front Upper Grille (2008-2014) AMG-inspired design in premium ABS — sharpen your C-Class silhouette with direct fitment and enhanced cooling airflow. W204 2008–2014 ABS Material Glossy Black Direct Fit C180 / C200 / C300 / C350 Overview Transform the front fascia of your Mercedes C-Class W204 (2008–2014) with this sculpted AMG C63-style upper grille. Engineered for seamless fitment across C180, C200, C300, and C350 models, this grille upgrades your sedan's presence without requiring structural modifications or specialist intervention. Crafted from high-grade ABS polymer, the grille combines visual aggression with functional design. The glossy black finish commands attention on any road, while the refined mesh geometry optimizes airflow directly to the radiator core—improving cooling efficiency during spirited driving or summer cruising. Whether you're seeking to refresh a slightly tired front end or align your C-Class with contemporary AMG aesthetics, this grille delivers authentic design language with bolt-on simplicity. No trimming, no welding, no guesswork. What's Included 📦 Front Upper Grille 1x AMG-style grille, black finish, ready to install ⚙️ Direct Fit Design No emblem included; retains factory mounting points 🛡️ Premium ABS Weather-resistant polymer; UV-stable gloss finish Product Highlights High-grade ABS construction resists UV degradation and seasonal temperature swings Glossy black finish maintains depth and lustre without fading Direct replacement—uses factory mounting holes; zero modifications needed Optimised mesh geometry increases radiator airflow and cooling efficiency AMG-inspired aesthetic elevates front-end presence and visual impact Lightweight design preserves handling and fuel economy Compatible with all W204 C-Class engines (C180, C200, C300, C350) Professional fitment recommended; typical install under 45 minutes Easy cleaning and maintenance with standard automotive care products Backed by quality assurance and fitment verification Compatibility Model Years Fitment Mercedes C180 (W204) 2008–2014 Direct Fit Mercedes C200 (W204) 2008–2014 Direct Fit Mercedes C300 (W204) 2008–2014 Direct Fit Mercedes C350 (W204) 2008–2014 Direct Fit Mercedes AMG C63 (W204) 2008–2014 Not Compatible Note: This grille is not designed for factory AMG C63 models, which feature a distinct intake geometry. Always verify your vehicle's base model before purchase. Installation Notes Difficulty: Intermediate | Time: 30–45 mins Disconnect the vehicle battery (negative terminal first). Open the bonnet and locate the upper grille mounting brackets (typically 4–6 points around the perimeter). Gently remove the factory grille by unclipping or unbolting fasteners; note their positions for reassembly reference. Align the new AMG-style grille with the mounting points, ensuring even spacing left and right. Secure all fasteners firmly—do not over-tighten, as ABS can crack under excess load. Verify grille sits flush with the bonnet edge and wing tops; adjust if necessary before final tightening. Reconnect the battery and visually confirm fitment under daylight. Allow any gloss finish to fully cure (24 hours in cool, dry conditions) before highway driving. Professional Installation: We recommend professional fitment to ensure correct alignment and prevent paint or trim damage. Improper installation may affect cooling airflow or create wind noise. Ready to Elevate Your C-Class? Refresh your Mercedes W204 with authentic AMG-inspired styling and functional cooling gains. This grille delivers subtle aggression without compromise—a true game-changer for any C-Class owner seeking a modern edge. Order today. Ships worldwide via DHL, FedEx, UPS, and TNT. 30-day money-back guarantee. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews 📞 UK Support: +44 203 943 9919 🌍 Worldwide shipping ✓ 30-day returns Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes-Benz distributor. All vehicle names and marques are registered trademarks of their respective owners. Product fitment and compatibility are provided in good faith based on factory specifications; we recommend verification with a qualified technician before purchase. Professional installation is advised to prevent damage and ensure optimal performance.

Victorious Automotive · Range Rover Evoque L551 · Running Boards Side Running Boards for Range Rover Evoque L551 (2020–2022) Precision-moulded aluminium alloy side steps engineered for a direct-fit, no-drill installation on the second-generation Range Rover Evoque — combining structural strength with a clean, factory-integrated look. L551 Evoque 2020 · 2021 · 2022 Aluminium Alloy ABS Body Stainless Steel Brackets No Drilling Required ISO9001 · TS16949 600–800kg Load Rated Direct Fit Overview The second-generation Range Rover Evoque (L551) sits at an elevated ride height that, while commanding on the road, can make entry and exit feel less graceful — particularly for shorter drivers, passengers with mobility considerations, or anyone loading luggage and equipment. These side running boards address that directly, providing a wide, secure step platform that integrates seamlessly with the Evoque's refined body lines. Constructed from ISO9001-certified high-grade aluminium alloy with an ABS step surface and stainless steel mounting brackets, these running boards are built to last in real-world conditions. The stainless steel hardware offers exceptional resistance to heat, acid, salt, and corrosion — essential for a vehicle that spends time on British roads, coastal environments, or anywhere road salt is a concern. The load-bearing structure is rated to withstand 600–800kg of static force, meaning the brackets will outlast the vehicle if properly maintained. Manufactured through a closed-mould production process, every dimension is engineered specifically for the L551 Evoque platform. The fit is precise — no adaptation, no shimming, no compromise. Whether your Evoque is a manual-door or automatic-door variant, the running board sizing is identical, and installation uses your vehicle's existing chassis holes without any drilling whatsoever. What's Included 🔲 Side Running Boards (Pair) Left & right aluminium alloy step boards with ABS anti-slip surface 🔩 Stainless Steel Mounting Brackets Thickened stainless steel stents for maximum structural rigidity 🛠️ Installation Hardware Pack All bolts, washers, and fasteners required for a complete fit 📋 Installation Guide Step-by-step instructions for straightforward self-installation Product Highlights Aluminium alloy body — lightweight yet exceptionally rigid underfoot ABS step surface resists scratches, scuffs, and surface wear over time Stainless steel brackets rated to 600–800kg static load capacity Anti-corrosion stainless hardware — resistant to heat, acid, salt, and moisture Closed-mould production ensures 100% dimensional accuracy for the L551 platform No drilling required — mounts directly to existing factory chassis holes Suitable for both manual and automatic door variants of the Evoque ISO9001 and TS16949 dual-certified manufacturing process Vibration-dampening construction reduces road noise and rattle Factory-integrated aesthetic that complements the Evoque's design language Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 – 2022 Direct Fit Range Rover Evoque L551 2023+ Verify Before Purchase Range Rover Evoque (First Gen) L538 2011 – 2018 Not Compatible Range Rover Velar L560 2017+ Not Compatible Discovery Sport L550 2015+ Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 45–75 minutes  |  👤 1–2 people recommended Park your Evoque on a flat, level surface and ensure the vehicle is secure before working underneath. Locate the pre-existing mounting holes along the underside of the chassis — no drilling is required at any stage. Attach the stainless steel mounting brackets to the chassis holes using the supplied hardware, ensuring each bracket is seated flush and square. With a second person to assist, align each running board onto the mounted brackets from front to rear. Insert and hand-tighten all fasteners before torquing down to a firm, even finish — do not over-tighten. Inspect all contact points, check for lateral movement, and confirm both boards are level and secure before driving. ⚠ Important: Always verify that the chassis mounting points are clean and free from corrosion before installation. If you are unsure at any stage, we recommend consulting a qualified installer. Do not exceed the rated load capacity of 600–800kg on either step. Complete Your Evoque Browse the full range of premium accessories for the Range Rover Evoque L551 — from exterior styling to interior protection — all designed with the same level of precision and finish quality. Shop All Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Product Description: Upgrade your vehicle with these high-quality carbon fiber mirror caps, designed to fit seamlessly and enhance both appearance and performance. With a sleek, modern aesthetic, these mirrors offer durability and style. Product Highlights: Glossy carbon fiber finish for a contemporary look Lightweight and sturdy construction Easy installation for a perfect fit Boosts aerodynamics and reduces drag Product Specifications: Material: Premium carbon fiber Fitment: Specifically crafted for the Model X Finish: Glossy carbon fiber texture Package Includes: Two carbon fiber mirror caps Notes: Check vehicle compatibility before purchase. Professional installation is recommended for best results.

Victorious · Tesla · Interior Storage Tesla Model 3 Central Armrest Storage Box 2017–2020 Premium interior organisation—seamless fit, premium materials, instant access to essentials. Model 3 2017–2020 Plastic + Silicone Direct Fit Tool-Free Install Overview If you own a Tesla Model 3 from 2017 to 2020, you understand the premium minimalist interior—but sometimes minimalism means sacrificed storage. This Central Armrest Storage Box is engineered to integrate seamlessly into your Model 3's centre console, adding functional storage without compromising the aesthetic your vehicle's design demands. Built from high-grade plastic and soft-touch silicone, this organiser keeps your phone, cards, sunglasses, and small essentials within arm's reach during every drive. The durable construction resists daily wear while the silicone-lined interior protects your devices from damage. Designed for direct fit to 2017–2020 Model 3 variants, installation takes minutes—no tools, no permanent modifications. It's the storage solution that respects both your vehicle and your investment. What's Included 📦 Central Armrest Storage Box Plastic + silicone construction Product Highlights Custom-fitted design for 2017–2020 Model 3—direct integration Premium plastic + silicone materials resist daily wear Soft-touch silicone interior protects devices from scratches Maximises centre console storage without visible bulk Keeps essentials within immediate reach while driving Tool-free installation—no drilling or modifications required Effortless removal for cleaning or replacement Maintains vehicle's minimalist interior aesthetic Durable construction engineered for long-term use Compact design respects available armrest space Compatibility Model Year Model Variant Compatibility 2017–2020 Model 3 (All Trim Levels) Direct Fit 2021+ Model 3 (Redesigned) Not Compatible Before ordering: Compare your vehicle's centre console shape with the product images to confirm fit. If unsure, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT). Installation ⏱️ Installation Time: 5–10 minutes | Difficulty: Beginner Open your Model 3's centre console and remove any existing contents. Inspect the armrest interior to ensure cleanliness—wipe if needed. Align the storage box with the console opening, checking fit from all angles. Gently lower the box into place, ensuring it sits flush against the interior walls. Test the fit by pressing gently on all sides—it should sit snugly without rocking. Load your essentials and close the console. Done. Note: This accessory uses a secure fit design—no adhesive or fasteners needed. If your Model 3's interior shape differs from product images, the fit may not be optimal. We offer a 30-day money-back guarantee if you're not satisfied. Ready to Organise Your Model 3? Add premium storage to your Tesla without compromise. Direct fit, tool-free, and built to last. Order today and get 20% off when you buy any 2 items. Shop Central Armrest Storage Code: 22GET20 30-Day Money-Back Guarantee Worldwide Shipping via DHL, FedEx, UPS, TNT 4.9/5 Stars from 12,300+ Reviews Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Tesla Inc., Elon Musk, or any official Tesla brand entity. Tesla and Model 3 are registered trademarks of Tesla Inc. All product descriptions, compatibility claims, and installation guidance are provided as-is for informational purposes. Customers are responsible for verifying compatibility with their specific vehicle before purchase. Victorious Automotive shall not be liable for any installation errors, vehicle damage, or compatibility issues arising from misuse or incorrect application.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Aluminium Door Speaker Panel Trim for Range Rover Velar 2017–2018 Precision-cut aluminium alloy speaker surround panels that replace the factory plastic trim and instantly elevate the door card aesthetics of your Velar's interior. Range Rover Velar 2017–2018 Aluminium Alloy Silver Finish Interior Trim LLK1146 ISO9001 Certified No Drilling Required Overview The Range Rover Velar arrived as a design-forward statement from Land Rover — a vehicle where interior detailing was elevated to something genuinely considered. Every surface, every material choice in the Velar's cabin was deliberate. The speaker panels on the door cards are a prime example: they sit in your sightline every time you glance at the door, and the stock plastic surrounds, while functional, do little justice to the cabin's overall intent. These silver aluminium alloy door speaker panel trims are designed specifically for the 2017 and 2018 Range Rover Velar. Machined from lightweight aluminium alloy, they deliver a cooler, more refined surface finish compared to the factory plastic — catching ambient light in the way that premium materials do. The silver tone pairs naturally with the Velar's interior colour palette, complementing brushed trim inserts and contrasting tastefully against both light and dark upholstery choices. Installation requires no modification whatsoever. Each panel is backed with high-strength automotive double-sided tape, meaning a clean fit with no tools, no drilling, and no permanent changes. If you're the sort of owner who values the Velar's design language and simply wants the interior details to reflect that more completely, these trims are a straightforward, satisfying upgrade. What's Included 🔊 Door Speaker Panel Trims Full set of aluminium alloy surrounds for door speaker apertures 🔲 Pre-Applied Adhesive Tape High-bond automotive double-sided tape pre-fitted to each panel 📄 Installation Instructions Step-by-step guide included for clean, accurate fitment Product Highlights Precision-cut aluminium alloy construction for lasting quality Silver finish complements the Velar's premium interior palette Manufactured to ISO9001 quality management standards Pre-applied automotive-grade double-sided adhesive tape No drilling, cutting, or permanent modification required Direct OEM-location fitment — designed specifically for Velar door cards Lightweight at 524g total — no impact on door function or feel Significantly upgrades the visual quality over factory plastic surrounds Reversible installation — can be removed without damage Fully compatible with factory door speaker and audio systems Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017–2018 All Trim Levels (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 Post-facelift Models Verify Before Purchase Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Defender L663 2020–2024 All Variants Not Compatible If your Velar is a 2019 or later model, please contact us on +44 203 943 9919 before ordering so we can confirm fitment for your specific build date. Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the door card surfaces around the speaker apertures are free from dust, grease, or any residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit each panel against the speaker surround before removing the adhesive backing. Confirm alignment and positioning carefully against the factory speaker grille location. Once satisfied with alignment, peel back approximately one third of the tape backing. Carefully position the leading edge of the panel, pressing firmly as you peel and lay the remainder of the tape. Apply sustained firm pressure across the entire panel surface for 30–45 seconds to ensure full adhesive contact with the door card. Repeat for all remaining door speaker panels. Allow 30 minutes before closing doors or applying lateral pressure to the trim. ⚠ Note: Do not attempt installation in cold temperatures below 10°C — adhesive performance may be reduced. If installing in cooler conditions, warm the door card surface gently with a heat gun on a low setting before applying panels. Upgrade Your Velar's Interior Browse the full range of Range Rover Velar interior accessories at Victorious Automotive — curated specifically for owners who hold their vehicle to a higher standard. Shop Range Rover Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Dashboard Trim for Range Rover Velar 2017–2020 A single, precision-fitted piece that transforms the Velar's centre dashboard with a refined matte silver finish — installed in under two minutes, no tools required. Range Rover Velar 2017–2020 Matte Silver ABS Plastic Dashboard Trim Adhesive Fit Interior Upgrade No Drilling Overview The Range Rover Velar was designed to sit between practicality and pure luxury — a vehicle that rewards those who pay attention to detail. From the flush door handles to the all-digital Touch Pro Duo interface, every element of the Velar's interior was conceived with intent. Yet the factory dashboard trim, for all its refinement, finishes in a flat, unremarkable tone that leaves something to be desired for owners who truly know what this cabin is capable of. This Matte Silver Dashboard Trim is purpose-built to slot directly over the existing Velar centre dashboard surround, delivering an immediate visual uplift without any permanent modification. The matte silver tone is understated and considered — it complements the Velar's interior palette rather than competing with it, adding contrast, depth, and a sense of bespoke craftsmanship that the standard trim simply doesn't offer. Manufactured from high-quality ABS plastic and pre-fitted with automotive-grade adhesive tape on the reverse, this piece requires no drilling, no wiring, and no professional fitting. If you can clean a surface and apply pressure, you can complete this upgrade in under two minutes. For Velar owners who take pride in their interior presentation, this is one of the most efficient upgrades available. What's Included 🪟 Dashboard Trim Cover 1 piece — matte silver ABS, pre-cut to Velar fitment 🔲 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape — factory-applied to reverse 📄 Fitment Guide Simple step-by-step installation reference included Product Highlights High-quality ABS plastic construction — durable and lightweight Matte silver finish — refined, non-reflective, OEM-style tone Precision-cut to factory Velar dashboard dimensions Pre-applied automotive adhesive tape on reverse face Tool-free installation — no drilling, no clips, no mess Installation completed in under 2 minutes Fully reversible — leaves no damage on removal Single piece (1pcs) — clean, seamless coverage Compatible with all trim levels of the 2017–2020 Velar Designed and tested specifically for Range Rover Velar interiors Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S / SE / HSE / R-Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Not Confirmed Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Land Rover Discovery 5 2017–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure the existing dashboard trim surface is clean, dry, and free from dust or grease. Use an isopropyl alcohol wipe if available for best adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse of the trim piece. Align the matte silver trim cover carefully with the existing dashboard surround — take a moment to confirm positioning before pressing. Apply firm, even pressure across the full surface of the piece for 30–60 seconds to activate the adhesive bond. Allow 30 minutes at room temperature before exposing to extreme heat or cold for a fully secure set. ⚠ Note: Do not attempt installation immediately after the vehicle has been in direct sunlight or extreme cold. Surface temperature affects adhesive performance. Allow the interior to reach a stable ambient temperature before fitting. Upgrade Your Velar Interior Today The Velar deserves an interior that matches its exterior ambition. This matte silver dashboard trim is one of the simplest, most impactful upgrades you can make — and it takes less time to fit than it does to make a coffee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Support: Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Mini Accessories · R56 · Exterior Trim Black ABS Fuel Tank Cap Cover for BMW Mini Cooper S JCW R56 (2006–2013) Premium finish upgrade that adds visual sophistication and protection to your Mini's fuel door. R56 2006–2013 ABS Material Black Finish Direct Fit Adhesive Install Overview The BMW Mini Cooper S JCW R56 (2006–2013) deserves exterior trim that matches its fun-to-drive character and minimalist design language. This Black ABS Fuel Tank Cap Cover is engineered to transform the look of your fuel door while maintaining perfect integration with your Mini's body lines. Constructed from rigid ABS plastic, this cover resists UV degradation, moisture, and thermal cycling—common challenges for exterior trim on compact, actively driven vehicles. The satin-black finish complements any Mini paint colour without adding visual bulk or compromising aerodynamic efficiency. Installation is straightforward adhesive-backed application, with no modifications to your fuel door mechanism. Whether you're refreshing a 2006 Cooper or modernizing a late-model JCW, this trim upgrade represents practical personalisation that elevates perceived quality and protects your fuel door's original finish. What's Included 📦 Fuel Tank Cap Cover Black ABS, direct-fit for R56 🔧 Adhesive Backing Pre-applied 3M tape for clean install Product Highlights Precision-engineered for flawless R56 Mini Cooper S JCW fit Durable ABS construction resists UV and temperature extremes Elegant satin-black finish complements any paint colour Simple adhesive installation—no drilling, no hardware Protects original fuel door from scratches and weathering Lightweight design maintains fuel economy and handling balance Seamless integration with factory body panels Suitable for both standard Cooper S and JCW variants Post-installation cleaning compatible with standard detailing Covers full year range: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Compatibility Model Year Range Status Mini Cooper S JCW R56 2006–2013 Direct Fit Mini Cooper R56 (Standard) 2006–2013 Direct Fit Mini One R56 2006–2013 Direct Fit Mini R55 Clubman 2007–2014 Not Compatible Mini R50/R52 First Gen 2001–2006 Not Compatible Installation Difficulty: Easy | Time: 10 minutes Clean the fuel door surface thoroughly with mild soap and water; dry completely. Position the cover on the fuel door to verify alignment and fitment. Peel back the adhesive backing gradually, pressing firmly as you go. Apply steady pressure across the entire cover for 60 seconds to ensure secure bond. Allow 24 hours for full adhesive cure before refuelling or washing. Note: For best results, install at room temperature (15–25°C). If adhesive is difficult to remove later, use a heat gun set to low (avoid excessive heat near fuel door seals). Perfect Your Mini's Finish Fuel tank cap covers are the finishing touch that separates stock Mini interiors from truly bespoke personalisation. This cover gives your R56 a premium look without compromise. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 4.9/5 stars from 12,300+ verified reviews ✓ UK support: +44 203 943 9919 (Mon–Fri 9am–7pm) This product is designed and manufactured by Victorious Automotive and is not affiliated with, endorsed by, or approved by BMW, Mini, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective owners. Fitment is based on engineering specifications for the R56 generation. Colours and finishes may vary slightly under different lighting conditions. Please refer to product photos and specifications before purchase.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Chrome ABS Water Cup Holder Panel Trim for Range Rover Evoque L551 (2019–2020) A precision-fit chrome accent panel that instantly elevates the cup holder surround of your second-generation Evoque with a refined, factory-quality finish. Evoque L551 2019–2020 ABS Chrome Interior Trim Cup Holder Panel No-Drill Fit Silver Finish ISO9001 Certified Overview The second-generation Range Rover Evoque (L551) set a new benchmark for compact luxury SUVs when it arrived in 2019, introducing a more sophisticated interior architecture with cleaner lines and premium material choices throughout the cabin. It's a vehicle that rewards attention to detail — and the cup holder surround is one of those small areas where aftermarket refinement genuinely makes a difference to the perceived quality of the interior environment. This Chrome ABS Cup Holder Panel Trim is engineered specifically for the 2019–2020 Evoque L551. Manufactured from high-grade ABS with a durable chrome-effect surface treatment, it sits flush over the existing cup holder panel, adding a polished silver accent that complements the Evoque's interior trim lines. The result is a cohesion between centre console elements that feels deliberate and premium rather than afterthought. Installation requires no drilling, no cutting, and no specialist tools. The panel is secured using pre-applied automotive-grade adhesive tape, making it a clean and reversible upgrade that any Evoque owner can complete at home in a matter of minutes. For drivers who care about the details of their interior — this is exactly the kind of finishing touch that makes a difference every time you reach for a drink. What's Included ✦ Cup Holder Panel Trim 1× ABS Chrome decoration panel — pre-cut to fit L551 Evoque 🔲 Adhesive Tape Pre-applied automotive-grade 3M-style double-sided tape 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered for Range Rover Evoque L551 (2019–2020) High-grade ABS construction — impact resistant and lightweight Polished chrome-effect silver finish for a premium aesthetic No drilling, cutting, or modification required Pre-applied automotive adhesive for a secure, lasting bond Sits flush for a factory-integrated appearance ISO9001 certified manufacturing process Lightweight at 200g — no structural load on trim panels Reversible installation — removable without damage Complements OEM chrome and gloss interior accents Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 (1st Gen) 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Discovery Sport L550 2019–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Ensure the cup holder panel area is thoroughly clean and completely dry. Use an isopropyl alcohol wipe to degrease the surface and remove any dust, oils, or residue. Dry-fit the trim panel first — align it carefully to the cup holder surround to confirm positioning before committing to adhesion. Peel the protective backing from the pre-applied adhesive tape, taking care not to touch the adhesive surface. Starting from one end, press the panel firmly into position along the cup holder surround, applying steady pressure across the full length of the trim. Hold the panel in place with firm pressure for 30–60 seconds to allow the adhesive to bond properly. Allow the adhesive to cure at room temperature for a minimum of 2 hours before subjecting the panel to vibration or heat from direct sunlight. ⚠ Important: Do not install in cold or damp conditions — adhesive performance is significantly reduced below 10°C. Verify your exact Evoque model code (L551) before fitting. This panel is designed specifically for 2019–2020 production year vehicles; fitment on later facelifted models cannot be guaranteed without confirmation. Explore the Full Evoque L551 Collection We stock a curated range of interior and exterior accessories designed specifically for the Range Rover Evoque L551 — all engineered to the same standard of fit and finish you'd expect from a premium Land Rover specialist. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious · Range Rover Evoque L551 · Interior Trim Carbon Fiber Style Air Conditioning Vent Frame Trim for 2019–2020 Range Rover Evoque L551 Elevate your Evoque's dashboard with premium carbon fiber detailing that transforms the cabin aesthetic in minutes. L551 2019–2020 Carbon Fiber Style Plug & Play Pre-Adhesive Overview The Range Rover Evoque L551 is a bold, contemporary compact luxury SUV that demands interior details to match its design language. These carbon fiber style air conditioning vent frame trims are engineered to complement the Evoque's refined cabin while delivering a modern, purposeful finish that catches light and admiration alike. Precision-fit for the 2019–2020 model years, each pair covers the AC vent frames with authentic-looking carbon fiber weave that rivals OEM-grade materials. The pre-applied automotive adhesive tape makes installation straightforward—no additional fasteners, no drilling, no risk of damage to your dashboard. Built by owners, for owners: we understand what matters. These trims aren't cosmetic afterthought—they're a deliberate upgrade that raises the perceived quality of your interior and gives your Evoque the refined edge it deserves. What's Included 🎯 Carbon Fiber Vent Trims (×2) Pre-adhesive dashboard-ready pair 📋 Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fiber finish with premium UV-resistant coating Direct fit—engineered to L551 OEM dimensions with zero gaps Pre-applied 3M automotive adhesive tape—no messy glues Reversible installation with zero permanent modification Lightweight composite backing for durability and longevity Modern weave pattern adds depth and dimension to dashboard Covers front AC vent frames for maximum visual impact Easy to clean—wipe with soft microfibre cloth Pairs seamlessly with other Victorious carbon trim upgrades Backed by our 30-day money-back guarantee Compatibility Model & Year Compatibility Range Rover Evoque L551 (2019–2020) Direct Fit Range Rover Evoque L551 (2021+) Not Compatible Range Rover Evoque L538 (2011–2018) Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Clean the surface: Use a microfibre cloth and isopropyl alcohol to thoroughly clean the existing AC vent frames. Remove all dust, fingerprints, and residue. Allow to dry completely. Peel and position: Carefully peel back the adhesive tape backing. Start with one corner and align the trim to the vent frame opening—use the vehicle's existing lines as guides. Press firmly: Working from the center outward, press the trim firmly onto the frame to activate the adhesive. Hold pressure for 15–20 seconds per section. Repeat: Apply the second trim to the opposing AC vent frame using the same method. Allow to cure: Wait 24 hours before exposing the vehicle to extreme heat or humidity. The adhesive bond strengthens over this period. ⚠️ Important: Do not apply to wet, cold, or dusty surfaces. Optimal application temperature is 18–25°C. If removal is needed, gently heat the trim edge with a heat gun and peel slowly—the adhesive is removable without residue or damage. Ready to Refine Your Evoque? Small details make the difference between a good interior and a great one. These carbon fiber trims are a fast, reversible way to elevate your Evoque's cabin presence. Shop Evoque Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any official Land Rover distributor. All trademarks and brand names are the property of their respective owners. Product compatibility is based on manufacturer specifications and fitment testing. Always verify fitment with your vehicle's specific year and market variant before purchase.

```html Victorious · Mercedes-Benz · Exterior Styling Glossy Black ABS Sports Grille for Mercedes GLA-Class X156 (2015–2020) Transform your GLA's front end with a premium racing grille that commands presence and refines proportion instantly. X156 GLA-Class 2015–2020 GLA180 / GLA200 / GLA250 / GLA45 Premium ABS Direct Fit Overview The Mercedes-Benz GLA-Class X156 is a nimble, urban-focused compact SUV that rewards owners who understand the importance of visual proportion and attitude. From 2015 through 2020, this generation built a loyal following—but the OEM front grille, whilst functional, lacks the character and sportiness that defines modern luxury crossovers. This Glossy Black ABS Sports Grille brings genuine racing heritage to your GLA. Engineered specifically for the X156 platform (GLA180, GLA200, GLA250, and GLA45 variants), it replaces your factory grille with a sleek, aggressive mesh design that deepens the visual stance and instantly signals intent. The high-gloss finish catches light beautifully, adding depth and shadow to the front bumper without appearing overwrought. Installation is straightforward—no modifications required, no lost fitment. Bolt-in compatibility and minimal hardware means you'll enjoy your refreshed front end in under an hour. Built from rigid ABS plastic, this grille is weather-resistant, durable, and finished to European quality standards. What's Included 🎁 1x GT R-Style Front Grille Glossy black, fully assembled 🔧 Hardware Kit All fasteners included 📋 Installation Guide Step-by-step instructions Product Highlights Premium-grade ABS plastic, resists UV fading and weather stress High-gloss black finish maintains showroom appearance over seasons Engineered for perfect fitment across all GLA-Class X156 variants No vehicle modifications required—completely bolt-in compatible Lightweight design reduces stress on mounting points Racing-inspired mesh pattern elevates visual aggression CE-certified quality assurance for peace of mind Symmetrical design suits both left-hand and right-hand drive vehicles Seamlessly replaces OEM grille without gaps or misalignment Easy to clean—maintains glossy finish with basic car care Compatibility Model / Year Compatibility GLA180 (2015–2020) Direct Fit GLA200 (2015–2020) Direct Fit GLA250 (2015–2020) Direct Fit GLA45 AMG (2015–2020) Direct Fit GLA-Class X156 (Pre-2015) Not Compatible GLA-Class C118 (2021+) Not Compatible Before ordering: Confirm your vehicle's X156 platform code and model year. Cross-reference with your VIN or owner's documentation to ensure compatibility. Installation Notes Difficulty Level: Beginner | Time: 45–60 Minutes Park on a level surface. Allow the engine to cool completely before starting. Open the hood fully and locate the six retaining clips holding the OEM grille to the bumper frame. Carefully unclip and remove the factory grille. Set aside (you may wish to keep it for resale or future reference). Position the new Glossy Black ABS grille, aligning the top edge with the hood shutline and side edges with the bumper corners. Secure all six clips firmly but without excessive force—ABS is rigid but not inflexible. Close the hood gently and inspect fitment from multiple angles in good light. Clean the new grille with lukewarm water and a soft cloth to remove any dust or fingerprints from shipping. Professional installation available: If you're unsure about any step, we recommend having a certified Mercedes technician perform the installation to preserve warranty integrity and bumper finish quality. Why Choose Victorious for Your GLA? We've worked with Mercedes-Benz owners for over a decade. Every component we offer is vetted for fit, finish, and longevity. This grille carries our 30-day money-back guarantee, meaning if it doesn't meet your expectations, we'll refund you in full—no questions asked. Fast worldwide shipping via DHL, FedEx, UPS, and TNT. Full support before, during, and after your purchase. And our 4.9/5 star rating across 12,300+ verified reviews speaks for itself. Ready to Refresh Your GLA's Front End? Add this Glossy Black ABS Sports Grille to your cart today and enjoy fast, worldwide delivery. Our team is here to help—call +44 203 943 9919 (Mon–Fri 9am–7pm GMT) with any questions. Shop Now Use code 22GET20 for 20% off when you order any 2 items. ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping ✓ 4.9/5 Stars (12,300+ Reviews) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official manufacturer. "Mercedes-Benz" and "GLA-Class" are registered trademarks of Daimler AG. Product names and vehicle references are used for compatibility identification only. All specifications and fitment details are provided as-is. Always verify compatibility with your specific vehicle before purchase. Installation of aftermarket components may affect your vehicle's manufacturer warranty—consult your dealer for details. ```

Victorious Automotive · Range Rover L405 · Interior Protection Transparent Interior Protection Film — Range Rover L405 LWB 2018 A precisely cut, virtually invisible TPU film that shields your 2018 Range Rover's most-touched interior surfaces from daily wear, scratches, and scuffs — without compromising the factory finish. Range Rover L405 LWB 2018 TPU Film Self-Healing Transparent Interior Protection Direct Fit No Residue Overview The 2018 Range Rover L405 Long Wheelbase is a vehicle built to the highest standard — a cabin defined by refined surfaces, tactile controls, and premium detailing that rewards those who appreciate the finer points of automotive design. Every switch, trim panel, and door handle has been considered. Keeping them in that condition, day after day, is where this film comes in. This transparent interior protection film is custom-cut to fit the specific contours of the 2018 Range Rover L405 LWB, covering the highest-contact zones: centre console, gear surround, air panel, door handles, knobs, gear panel, door interior trim, and air outlets. The ultra-clear TPU construction remains virtually invisible once applied, preserving the factory appearance while providing a robust barrier against fingernail marks, ring scratches, and general handling wear. Unlike generic cut-to-fit films, this kit is precision-engineered for your exact model year and body configuration. The self-healing TPU layer absorbs minor surface abrasions over time, recovering its clarity with gentle heat. No adhesive residue. No lifted edges. No compromise to the interior you've invested in. What's Included 🎛️ Centre Console Film Covers the full centre console surface ⚙️ Gear Surround Film Precision cut for the gear selector area 💨 Air Panel Film Protects climate control and vent trim 🧩 Suite Kit Film Full suite trim panel coverage 🔘 Knob Protection Film Fits rotary and push-type knob surrounds 🚪 Door Handle Film Shields interior door pull handles 📐 Gear Panel Film Covers the gear panel trim surround 🛡️ Door Interior Film Protects door card trim panels 🌬️ Outlet Film Covers air outlet surrounds and bezels 🧰 Installation Toolkit Includes scraper tool and cleaning cloth Product Highlights Ultra-clear TPU material maintains factory interior appearance with zero visual distortion Self-healing surface layer repairs light scratches and scuffs with ambient or applied heat Precision die-cut for the 2018 Range Rover L405 LWB — no trimming required Covers 9 high-contact interior zones in a single comprehensive kit Pressure-sensitive adhesive leaves zero residue on removal Resistant to UV discolouration — stays optically clear over time Protects against fingernail marks, key scratches, and ring abrasions Flexible TPU conforms to curved and textured surfaces without bubbling Compatible with factory gloss, satin, and piano black interior trims Installation toolkit included — no specialist tools or dealership visit required Compatibility Vehicle Code Year Range Fit Range Rover Vogue LWB L405 2018 Direct Fit Range Rover Vogue SWB L405 2018 Verify Before Purchase Range Rover Vogue L405 L405 2013–2017 Not Compatible Range Rover Vogue L405 L405 2019–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover L460 L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–75 minutes  ·  Tools: Included in kit Thoroughly clean all target surfaces using the included microfibre cloth. Remove any dust, oils, or residues that could affect adhesion. Allow surfaces to dry completely. Work in a dry, temperature-controlled environment — ideally between 15°C and 25°C. Avoid installation in cold, damp, or humid conditions. Identify each film piece against the corresponding surface before peeling. The kit is labelled by placement zone for easy reference. Peel back a small section of the backing film and align the TPU piece precisely against the panel edge. Work slowly from one end to the other, pressing down firmly with the included scraper as you go. Use the scraper tool to smooth out any air bubbles toward the nearest edge. For tight curves, gentle finger pressure works alongside the scraper. Once all pieces are applied, press all edges firmly for 30–60 seconds to ensure full adhesion, paying particular attention to corners and cut-outs. Allow a minimum of 48 hours before cleaning the vehicle interior. Avoid any chemical cleaners or solvent-based products on or near the film. ⚠ Important: Do not install during rain, snow, or freezing temperatures. Avoid washing the vehicle interior or applying any cleaning products for 48 hours post-installation. Never use chemical agents, alcohol, or solvent cleaners directly on the protective film — warm water and a soft cloth are sufficient for ongoing maintenance. Protect Your Range Rover's Interior — For Good The 2018 Range Rover L405 deserves to look exactly as it did the day you took delivery. This film kit is one of the simplest, most effective ways to ensure it does — for years to come. Explore our full Range Rover L405 accessories collection to complete your build. Shop Range Rover L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Mercedes · Mirror Covers Carbon Fiber Mirror Covers for Mercedes A, C, CLS, E & CLA Class Premium replacement mirror covers with genuine carbon fiber weave and OEM fitment—available in five striking styles including AMG performance look. W176 / W204 / W207 / W212 / W218 / W221 2008–2017 Carbon Fiber + ABS Laminate Dry Carbon Add-On Option 5 Finish Styles Overview Whether you drive a C-Class W204, E-Class W212, CLS W218, or A-Class W176, these carbon fiber mirror covers deliver the aggressive sportiness Mercedes-AMG owners demand. Built on OEM mirror bases using lamination technology—where genuine carbon weave is infused directly into the plastic substrate—these covers achieve perfect fitment while delivering stunning visual impact. Available in five finishes: carbon fiber with red racing line, carbon fiber with blue accents, matte black, gloss black, or our signature AMG-inspired performance look. Each pair ships as left and right covers, ready for a straightforward swap or add-on application. The lamination process ensures durability without the fragility of pure dry carbon. Finished with high-gloss lacquer, these mirrors are built to last while turning heads on the road. What's Included 🪞 Mirror Cover Pair (L+R) Left and right covers ready to install 🛠️ Fitment Guide Easy-follow installation instructions ✓ OEM Fit Confirmed Direct replacement—no modifications 📦 Secure Packaging Protected for safe worldwide delivery Product Highlights Laminated Carbon Fiber – genuine weave infused into OEM plastic substrate Five Finish Options – red line, blue line, matte black, gloss black, AMG look 1:1 OEM Fitment – drop-in replacement, no drilling or modifications High-Gloss Lacquer Finish – UV-resistant, durable protection Dual Installation Modes – replacement or add-on with double-sided tape Race-Inspired Design – aggressive styling perfect for performance-focused owners Lightweight Construction – approximately 1kg per pair Perfect Mirror Glass Retention – covers fit around your existing mirror glass Precise Edge Finishing – seamless edges blend with door panel Colour-Coded Options – match your engine bay, brake calipers, or accent trim Compatibility Mercedes Model Chassis Code Year Range Fit Status A-Class W176 2013–2017 Direct Fit C-Class (Sedan) W204 2007–2014 Direct Fit C-Class (Cabriolet) W207 2009–2017 Direct Fit E-Class W212 2010–2016 Direct Fit CLS-Class W218 2011–2017 Direct Fit S-Class W221 2007–2013 Direct Fit GLA-Class X156 2015+ Direct Fit GLK-Class X204 2008+ Direct Fit CLA-Class W117 2013+ Direct Fit Installation Guide Replacement Method (Recommended) Remove Original Mirrors: Carefully prise the OEM mirror cover from the door panel using a soft plastic trim tool. Work gently to avoid scratching painted surfaces. Disconnect Wiring (if electric): If your mirrors include electric adjustment, unplug the connector before full removal. Align New Cover: Position the carbon fiber cover over the mirror assembly, ensuring clips engage fully with the door panel frame. Secure Fitment: Press firmly until you hear/feel three distinct clicks confirming full seating. No tools required. Reconnect Electronics: Plug in the electrical connector if applicable; test mirror movement to confirm function. Final Inspection: Check alignment around the door seam and body line—should sit flush with zero gaps. ⚠️ Replacement Note: This method works best when removing original OEM covers carefully. If original mirrors are damaged or stuck, use the add-on method instead. Add-On Method (Dry Carbon Option) Clean Existing Covers: Wash and dry the OEM mirror covers thoroughly with warm soapy water; dry with microfibre cloth. Wipe with Isopropyl Alcohol: Use IPA or panel wipe to remove any oils, dust, or residue from the mirror surface. Apply Double-Sided Tape: Peel and apply automotive-grade 3M double-sided tape (provided) to the back of the dry carbon cover, matching the contour of the mirror. Position Carefully: Align the cover with the OEM mirror, pressing from the centre outward to avoid air pockets. Press for 60 Seconds: Apply firm, even pressure for at least a minute to ensure full tape contact and cure. Allow 24-Hour Cure: Do not drive for at least 24 hours to allow adhesive to reach full strength. ⚠️ Add-On Note: Double-sided tape adhesion lasts 3–5 years in typical conditions. This method is fully reversible—simply lift the cover gently and wipe any residue with IPA. Ready to Transform Your Mercedes? These carbon fiber mirror covers are engineered for owners who refuse to compromise on style or quality. Whether you're building a complete AMG aesthetic or adding a single aggressive accent, we ship worldwide with full 30-day money-back confidence. View All Mercedes Styles Use code 22GET20 for 20% off when buying any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL/FedEx 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist accessory retailer. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler AG, or any official Mercedes brand entity. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed for fitment only and does not alter vehicle performance, emissions, or warranty status. Always verify fitment with your vehicle's specific model year and chassis code before purchase. Installation requires mechanical competency; professional installation is recommended if you lack automotive experience.

Victorious Automotive · Range Rover Sport L494 · Exterior Protection Front & Rear Bumper Guard Protection Plates for Range Rover Sport L494 (2018–2021) Precision-laser-cut stainless steel bumper guard plates engineered to shield the front and rear bumpers of your 2018–2021 Range Rover Sport from road debris, scratches, and daily wear — without compromising its commanding aesthetic. Range Rover Sport L494 2018–2021 Stainless Steel Front & Rear Drill-Free Fitment Laser Cut Exterior Protection Direct Bolt-On Overview The 2018–2021 Range Rover Sport L494 is one of the most visually assertive SUVs on the road — a vehicle that earns its presence whether navigating city streets or covering open terrain. Its low-slung bumper lines and sculpted lower body panels are defining design features, but they're also among the most exposed surfaces to stone chips, kerb contact, grit, and trailing debris. Over time, even minor accumulation of wear on these areas begins to undermine the confidence the Sport is designed to project. These Front and Rear Bumper Guard Protection Plates are designed specifically for the L494 Sport's 2018–2021 facelift generation, using precision laser-cutting to match the exact contours of the bumper's lower face. Manufactured from high-grade stainless steel, each plate delivers genuine structural defence against mud, gravel, and road debris — acting as a sacrificial shield between the elements and your original paintwork. Unlike generic universal guards, these plates integrate flush with the bumper line, maintaining the Sport's purposeful silhouette rather than disrupting it. Installation requires no drilling, no cutting, and no specialist tools. The plates bolt directly onto existing mounting points using the hardware provided, meaning fitment is clean, reversible, and achievable at home in under an hour. For owners who refuse to let daily mileage take the edge off a vehicle they've invested in, these plates are a straightforward, high-quality solution. What's Included 🛡️ Front Bumper Guard Plate Laser-cut stainless steel, L494 Sport fitment 🛡️ Rear Bumper Guard Plate Matched pair, same material and finish 🔩 Mounting Hardware All fixings required for direct bolt-on installation 📄 Installation Instructions Step-by-step fitment guide included Product Highlights Precision laser-cut for exact flush fit on the L494 Sport bumper profile High-grade stainless steel construction resists corrosion and impact Covers both front and rear bumper lower sections in one package Protects original paintwork from stone chips, grit, and debris Drill-free, direct bolt-on installation onto OEM mounting points No special tools required — achievable with standard home equipment Reversible fitment — fully removable without leaving permanent marks Maintains the Sport's factory aesthetic without visual compromise Designed specifically for the 2018–2021 L494 facelift generation Enhances the purposeful, rugged stance of the Range Rover Sport Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L494 (Facelift) 2018–2021 Direct Fit Range Rover Sport L494 (Pre-Facelift) 2013–2017 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: Basic hand tools only Ensure the vehicle is parked on a flat, stable surface and the ignition is off. Allow the bumper area to cool if the vehicle has been recently driven. Clean the front and rear bumper lower surfaces thoroughly with a dry microfibre cloth to remove any dirt, grease, or moisture that could affect fitment alignment. Locate the existing OEM mounting points on the lower bumper — these are the anchor positions the guard plates are designed to align with directly. Offer up the front guard plate to the bumper, aligning the pre-drilled holes with the OEM mounting points. Confirm flush contact across the full width before securing. Hand-tighten the provided fixings first to confirm alignment, then tighten to the recommended torque using the included hardware. Do not over-tighten stainless steel fixings. Repeat the same process for the rear bumper guard plate, ensuring equal gap consistency along the lower edge. Step back and visually inspect both plates for level fitment and symmetry. Wipe down with a clean cloth to remove any fingerprints before driving. ⚠ Important: Confirm your exact model year is 2018–2021 L494 before installation. The facelift and pre-facelift L494 bumpers differ in profile. Fitting to an incompatible year may result in poor alignment or gaps. If in doubt, contact us before proceeding. Built for Range Rover Sport Owners Who Demand More At Victorious Automotive, every accessory we carry is selected for owners who take their vehicle seriously. These bumper guard plates are a practical investment in preserving the condition and appearance of your 2018–2021 Range Rover Sport L494 — one that pays for itself the first time it deflects a stone chip that would have gone straight to bare metal. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Range Rover, Range Rover Sport, and L494 — are the property of their respective owners and are used solely for the purpose of fitment identification and compatibility reference.