Best selling products

Victorious · Defender 90/110 · Exterior Quad Lights Front Bumper with LED Lights for Land Rover Defender 90 110 Premium stainless steel front bumper with integrated quad LED lights, designed to enhance protection and visibility on your classic Defender. Defender 90/110 1990–2016 Stainless Steel LED Lights Twin Style Option Overview The Land Rover Defender 90 and 110 remain iconic workhorses—rugged, purposeful, and built to endure. This Quad Lights Front Bumper is engineered to match that heritage while adding contemporary protection and visibility. Whether you're navigating rough terrain or urban environments, this bumper shields your vehicle's front end while its integrated LED lighting system ensures you're seen, day or night. Constructed from premium stainless steel, this bumper resists rust and corrosion in extreme conditions. The quad LED light arrangement delivers superior illumination without the weight or complexity of aftermarket light bars, maintaining the Defender's authentic aesthetic while improving safety and functionality. Two style variants are available, allowing you to choose the configuration that best suits your driving demands. Each bumper is precision-engineered for direct fitment to both Defender 90 and 110 chassis, requiring no cutting or modification. What's Included 🛡️ Front Bumper Assembly Stainless steel construction, one piece 💡 Quad LED Light Units Integrated, warm white output 🔧 Hardware Kit Stainless fasteners and brackets included 📖 Installation Guide Step-by-step instructions with diagrams Product Highlights Stainless steel construction resists rust, salt, and harsh UV exposure Integrated quad LED lights for enhanced visibility and modern styling Direct fit for Defender 90 and 110 (1990–2016 models) Two style configurations to match your aesthetic preference Increased ground clearance and approach angle protection All mounting hardware and fasteners supplied Professional-grade welding and finishing LED light units are fully weatherproof and sealed No modification required to vehicle frame or wiring harness Maintains authentic Defender proportions and character Compatibility Model Year Range Fit Status Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2016 Not Compatible Defender L663 2020–2026 Not Compatible Discovery Series All Not Compatible Installation Notes Difficulty Level: Moderate | Time: 2–3 hours Support vehicle safely on ramps or jack stands. Ensure engine is cold. Remove existing front bumper by unbolting fasteners at mounting points (8–10 bolts). Disconnect wiring harness from factory lights and trim panel clips. Align new Quad Lights bumper with frame mounting brackets. Insert and hand-tighten all fasteners before final torque (12–14 Nm per bolt). Connect LED light wiring to vehicle's auxiliary power circuit or relay module (recommended: professional installation for electrical). Test all lights and perform final visual inspection before lowering vehicle. Important: LED light wiring should be installed by a qualified automotive electrician to ensure proper grounding and prevent short circuits. Factory wiring may require a relay or dedicated circuit breaker. Ready to Upgrade Your Defender's Front End? This Quad Lights Front Bumper combines classic Defender aesthetics with modern safety and lighting technology. Protect your investment while standing out on the road or trail. Add to Cart Use code 22GET20 for 20% off when you buy any 2 accessories. 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx ✓ Call +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket supplier. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for aftermarket use only.

Victorious Automotive · Defender L663 · Loadspace Trim Black Stainless Steel Loadspace Treadplate – Land Rover Defender 110 L663 (2020–2026) A precision-formed black stainless steel loadspace treadplate that protects the Defender 110's rear sill from daily wear while delivering a purposeful, finished aesthetic worthy of the L663's character. Defender L663 110 Wheelbase 2020–2026 Black Finish Stainless Steel Loadspace Protection Model: LLK2605 ISO9001 Certified No Drilling Required Overview The Land Rover Defender L663 110 was built to work as hard as it looks — and no area of the vehicle bears the brunt of daily use more than the loadspace sill. Whether you're loading gear for an overland trip, hauling dogs and kit across rural terrain, or simply using the Defender the way it was intended, that rear aperture takes a constant battering from boots, cargo, and equipment. This Black Loadspace Treadplate has been engineered specifically for the 2020-onwards Defender 110 L663 to sit flush against the rear load sill, providing a protective layer of high-grade stainless steel between your vehicle's body and the inevitable scuffs and scratches that come with ownership. The satin black finish is not simply a coating — it complements the Defender's bold lines and dark exterior trim options with a cohesive, factory-integrated appearance. Constructed to ISO9001-certified manufacturing standards and finished with automotive-grade adhesive tape backing, this treadplate installs cleanly without modification, drilling, or specialist tools. It's the kind of upgrade that rewards the detail-oriented owner — subtle enough to look deliberate, durable enough to last the life of the vehicle. What's Included 🪛 Loadspace Treadplate × 1 Black stainless steel, model LLK2605 🔧 Adhesive Tape Pre-Applied Automotive-grade backing for secure fit 📄 Installation Guide Step-by-step fitment instructions Product Highlights Purpose-engineered for the Defender 110 L663 loadspace sill profile High-grade stainless steel construction for lasting durability Satin black finish complements dark trim and exterior details ISO9001-certified manufacturing process for quality assurance No drilling, cutting, or modification to original bodywork required Automotive adhesive tape backing for a clean, bonded installation Protects against scuffs, scratches, and boot marks at the load sill Dimensions: 70cm (L) × 15cm (W) × 10cm (H) — 300g total weight Retains the Defender's working aesthetic without looking aftermarket Reversible installation — preserves original finish beneath Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Land Rover Defender (Original) L316 Pre-2016 Not Compatible Range Rover Sport L494 / L461 All Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Open the Defender 110's tailgate fully to expose the rear load sill area and gain clear access to the fitment surface. Thoroughly clean the sill surface using an isopropyl alcohol wipe or panel prep solution, removing all dirt, grease, wax, and residue. Allow to dry completely — this step is critical for adhesion performance. Dry-fit the treadplate against the sill to confirm alignment and positioning before removing the adhesive backing. Peel back the adhesive tape liner from the rear of the treadplate, taking care not to touch the adhesive surface. Starting from one end, carefully press the treadplate firmly into position along the sill, applying consistent pressure across the entire length for 30–60 seconds. Apply firm thumb pressure across all edges and corners to ensure full contact and eliminate any lifting points. Allow a minimum of 2–4 hours cure time before loading the vehicle or exposing the sill to moisture. ⚠ Important: Do not install in temperatures below 10°C / 50°F as adhesive performance may be compromised. Avoid washing the vehicle for 24 hours after installation to allow full bond strength to develop. Complete Your Defender's Interior Explore our full range of Defender L663 interior upgrades — from door sill plates and dashboard trim to loadspace liners and grab handle covers. Every product is selected for fit, finish, and long-term quality. Shop Defender 110 L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. "Defender" and "Land Rover" are registered trademarks of Jaguar Land Rover Limited.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Rear Trunk Trailer Button Frame Trim for Land Rover Defender 110 L663 (2020+) A precision-formed chrome frame trim that elevates the Defender 110's rear loading area with a polished, factory-coherent finish — fitted in minutes, no tools required. Defender L663 2020–2026 ABS Chrome Trailer Button Frame Rear Trunk Trim 3 Colour Options Adhesive Fit ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that demands accessories worthy of its character — purposeful, considered, and built to last. Every detail on the Defender has been resolved with intent, and the area surrounding the rear trunk trailer button is no exception. Left unfinished from the factory, it's a small but visible detail that enthusiast owners notice. This Rear Trunk Trailer Button Frame Trim is designed exclusively for the 2020-onwards Defender 110 L663. Formed from high-grade ABS and finished in either Pearl Chrome, Silver, or Oak Wood Grain, it frames the trailer coupling button recess with a clean, layered look that integrates naturally with the Defender's existing interior trim language. The result is a rear loadspace that looks considered from every angle — even when the tailgate is open and your kit is loaded. At just 17g, this trim adds zero meaningful weight while delivering a noticeable visual upgrade. The automotive-grade adhesive backing ensures a secure, rattle-free bond to the factory panel surface. If you're building out your Defender's interior to the standard it deserves, this is one of those small pieces that makes the whole look cohesive. What's Included 🔲 Rear Trunk Trailer Button Frame Trim 1 piece · ABS Chrome finish · pre-taped 🔧 Automotive Adhesive Tape Pre-applied to reverse face · strong bond 📋 Installation Guide Step-by-step fitment reference included Product Highlights Designed exclusively for the Land Rover Defender 110 L663 (2020 onwards) High-grade ABS construction — resistant to warping, UV, and temperature change Available in Pearl Chrome, Silver, and Oak Wood Grain finishes Pre-applied automotive adhesive tape for a clean, tool-free installation ISO9001 certified manufacturing — consistent quality across every unit Lightweight at just 17g — no structural or weight implications whatsoever Precise fitment to the factory trailer button recess — no trimming required Rattle-free bond when correctly applied to a clean, dry panel surface Complements other chrome or wood grain interior trim on the L663 100% brand new — not a refurbished or repackaged item Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Open the Defender 110 tailgate fully and locate the trailer coupling button recess on the rear interior panel. Thoroughly clean the panel surface around the button recess using an isopropyl alcohol wipe or similar degreaser. Allow to dry completely — adhesion depends on a clean, grease-free surface. Test-fit the trim piece without removing the adhesive backing to confirm alignment and positioning before committing. Peel the adhesive backing from the reverse of the trim piece carefully, ensuring the tape remains flat and undistorted. Align the trim precisely over the button recess and press firmly from the centre outward, applying sustained pressure for 30–60 seconds across the full surface. Allow the adhesive to cure for a minimum of 24 hours before exposing to moisture, extreme temperatures, or heavy use. ⚠ Note: Confirm fitment compatibility with your specific Defender variant before purchase. The button recess geometry may differ between 90, 110, and 130 body styles. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm before you order. Complete Your Defender's Interior This trim is one part of a wider collection of Defender L663 interior accessories at Victorious. Browse the full range — from door handle surrounds to dashboard bezels — all held to the same standard your Defender deserves. Shop Defender L663 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Defender L663 · Interior Trim Left-Hand Drive ABS Black Interior Window Lifter Switch Trim for 2020 Land Rover Defender 110 A precision-formed ABS black switch surround that refines the door panel aesthetic of the 2020 Defender 110 — clean lines, factory-level fitment, zero compromise. Defender L663 2020 Model Year Left-Hand Drive ABS Black Window Lifter Switch Trim Interior Trim No-Drill Install ISO9001 Certified Overview The 2020 Land Rover Defender L663 was a complete reimagining of one of the most iconic vehicles ever made — bold, capable, and designed with an interior that finally matched its exterior ambition. Yet for owners who want every detail to feel intentional, the door panel window lifter switch area is one of those subtle surfaces that benefits enormously from a well-fitted trim overlay. It's a small change that shifts the feel of the entire door card. This ABS Black Window Lifter Switch Trim is engineered specifically for the Left-Hand Drive Defender 110 (2020 onwards), offering a snug, factory-matched surround for the window control switch cluster. Formed from high-grade ABS material and finished in a clean gloss black, it integrates seamlessly with the Defender's existing interior language — adding definition without distraction. At 29cm long and weighing just 148g, the trim is lightweight yet rigid, built to resist flex, temperature variation, and daily door use without lifting or fading. Installation requires no tools, no drilling, and no professional fitting — automotive-grade adhesive tape is pre-applied, meaning this is a genuine weekend upgrade that takes minutes and lasts years. Whether you're building out a full interior refresh or simply want a more considered finish on your Defender's door panels, this trim is exactly the kind of detail-oriented accessory that separates a standard Defender from a truly personal one. What's Included 🪟 Window Lifter Switch Trim 1× full set — LHD Defender 110 fitment 🔧 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant backing 📄 Fitting Guide Step-by-step installation instructions included 📦 Protective Packaging Secure box — arrives scratch-free, ready to fit Product Highlights Precision-engineered for Left-Hand Drive Defender 110 (2020) — exact fitment, no gaps Premium ABS construction — rigid, lightweight, and resistant to daily wear Gloss black finish — complements both dark and light Defender interior colour packs ISO9001 certified manufacturing — consistent quality control at every stage No-drill, no-cut installation — adhesive-backed for a clean, reversible fit Dimensions: 29cm × 12cm × 4cm — purpose-sized for the LHD switch panel Weighs just 148g — no added bulk or door panel stress Heat and UV stable — maintains finish in all climates Compatible with Defender 110 standard and specification variants (LHD, 2020) Pairs with other Victorious Defender L663 interior trim pieces for a cohesive upgrade Compatibility Vehicle Year Drive Body Style Fit Land Rover Defender 110 (L663) 2020 Left-Hand Drive 110 (5-door) Direct Fit Land Rover Defender 130 (L663) 2020 Left-Hand Drive 130 (Extended) Direct Fit Land Rover Defender 90 (L663) 2020 Left-Hand Drive 90 (3-door) Verify Before Purchase Land Rover Defender 110 (L663) 2020 Right-Hand Drive 110 (5-door) Not Compatible Land Rover Defender (Pre-2020 / Classic) Pre-2020 Any Any Not Compatible Range Rover Sport / Vogue / Velar Any Any Any Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked and the door panel at room temperature. Avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Thoroughly clean the window lifter switch surround area using an isopropyl alcohol wipe or panel prep solution. Remove all dust, grease, and residue. Allow to dry completely — this step is critical for long-term adhesion. Dry-fit the trim piece against the switch panel to confirm alignment and coverage before committing. Note the natural orientation and any reference points on the door card. Peel back the protective film from the pre-applied adhesive tape on the reverse of the trim. Do not touch the adhesive surface. Carefully align the trim piece to the switch surround, starting from one edge and pressing firmly across the full surface. Apply sustained hand pressure for 30–60 seconds to activate the adhesive bond. Allow 24 hours for the adhesive to fully cure before operating windows repeatedly or subjecting the trim to heavy contact. ⚠ Important: This trim is designed for Left-Hand Drive Defender 110 models only. Attempting to fit on a Right-Hand Drive vehicle will result in incorrect alignment. If you're unsure of your vehicle's specification, check your VIN or contact us at +44 203 943 9919 before ordering. Complete Your Defender Interior This window lifter switch trim is just the beginning. Explore the full Victorious range of Defender L663 interior upgrades — from dashboard overlays to gear surround trims — and build an interior that feels entirely your own. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styled accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for the purpose of fitment compatibility.

Victorious Automotive · Defender L663 · Interior Trim Oak ABS Front Air Vent Cover Frame for Land Rover Defender 110 (2020–2026) L663 A precision-fit oak wood grain ABS overlay that brings warm, natural texture to the Defender 110's front air vent surrounds — no tools, no drilling, no compromise. Defender L663 2020–2026 Oak Wood Grain High-Quality ABS Direct Fit Peel & Stick LHD Only Interior Trim ISO9001 Certified Overview The Land Rover Defender 110 L663 represents a genuine reimagining of an icon — purposefully engineered, architecturally bold, and unmistakably modern inside. Its cabin is designed to be functional yet characterful, and the air vent surrounds sit front and centre on the fascia, making them one of the most visible surfaces in the entire interior. These Oak ABS Front Air Vent Cover Frames are designed specifically for that space. Finished in a warm oak wood grain, they introduce a natural, organic contrast against the Defender's industrial material palette. Whether your Defender is specced in Ebony, Lunar or Pimento, the oak finish adds a layer of crafted warmth that the standard trim simply doesn't offer. The ABS substrate ensures the panels are rigid, precisely contoured and built to last — not a flimsy film, but a structured overlay with genuine presence. Installation requires no specialist tools or professional fitting. Each panel is engineered to locate precisely over the existing vent frame and bonds cleanly using factory-grade adhesive backing. The result is a factory-finish appearance that looks like it came straight from a customisation workshop — because, in every meaningful sense, it did. What's Included 🪵 Oak ABS Vent Cover Frame × 2 Left and right front air vent surrounds in oak wood grain finish 🔖 Pre-Applied Adhesive Backing Factory-grade 3M-style adhesive — no additional fixings required 📋 Installation Guidance Step-by-step fitting instructions included in packaging Product Highlights Oak wood grain finish adds natural warmth to the Defender's industrial interior High-quality ABS construction — rigid, structured, and built for longevity Precision-moulded to match the exact contours of the L663 vent frames Peel-and-stick installation — no drilling, no clips, no professional fitting needed Factory-grade adhesive backing for a clean, flush bond to the original trim 100% brand new — supplied in protective packaging to prevent transit damage Manufactured in an ISO9001 certified facility for consistent quality assurance Covers both left and right front air vent surrounds — a complete front fascia upgrade Compatible with Defender 110 and 130 L663 models from 2020 onwards Designed exclusively for Left Hand Drive (LHD) Defender variants Compatibility Vehicle Model Code Year Range Drive Fitment Land Rover Defender 110 L663 2020–2026 LHD Direct Fit Land Rover Defender 130 L663 2022–2026 LHD Direct Fit Land Rover Defender 90 L663 2020–2026 LHD Verify Before Purchase Land Rover Defender 110 L663 2020–2026 RHD Not Compatible Land Rover Defender (Original) Pre-2020 All Years Any Not Compatible Range Rover / Discovery Any All Years Any Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Wipe down the existing air vent surrounds using an isopropyl alcohol wipe or interior detailer to remove any dust, oils or residue that could affect adhesion. Allow the surface to dry fully. Do not apply the covers to a damp or recently cleaned surface — a minimum of 5 minutes drying time is recommended. Dry-fit each cover frame against its corresponding vent surround before removing the adhesive backing. Confirm alignment and orientation — the panels are handed (left and right), so ensure each one is correctly positioned before committing. Peel back a small section of the adhesive liner, align the panel carefully to the vent surround edges, and press down from the centre outward to avoid air pockets. Once positioned, apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond. Work from the centre toward each corner. Repeat the process for the second panel. Leave the interior undisturbed for a minimum of 24 hours before exposing to heat or direct sunlight, to allow the adhesive to cure fully. ⚠ Important: These covers are designed exclusively for Left Hand Drive (LHD) Defender 110 and 130 L663 models. Right Hand Drive vehicles are not compatible. Please confirm your vehicle's drive configuration before ordering. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Upgrade Your Defender's Interior Today Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium interior accessories. Browse the full Defender L663 collection and refine every detail of your cabin. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm 🏭 ISO9001 Certified Manufacturing Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

NAPOKIT · Audi · Interior Accents Black Carbon Fiber Car Key Sticker for Audi Premium carbon fibre aesthetic upgrade for your Audi key fob—instant luxury detail with zero installation fuss. Audi Carbon Fiber Key Fob Adhesive Sticker 1-Piece Set Overview If you're an Audi enthusiast, you know every detail matters—from the exterior lines to the smallest interior touches. Your key fob is one of the most frequently handled objects in your daily routine, yet it's often overlooked as an opportunity to express your car's premium character. This Black Carbon Fiber Key Sticker transforms that utilitarian plastic into a statement piece that mirrors Audi's obsession with functional elegance. Crafted with a genuine carbon fiber finish and backed by precision engineering, this adhesive sticker applies directly to your Audi key fob without modification or permanent alteration. The 1-inch square format covers the primary face area, creating a subtle yet sophisticated visual upgrade that catches light and draws admiring glances whenever you reach for your keys. Whether you drive an A3, A4, A6, or Q-Series model, this universal fit sticker adds that Audi motorsport DNA to an often-forgotten accessory. It's the kind of detail that says you understand that true luxury lives in refinement, not excess. What's Included 🎨 1× Carbon Fiber Key Sticker Black gloss finish, 1-inch dimensions 📋 Application Instructions Step-by-step guide for perfect placement Product Highlights Authentic carbon fiber aesthetic with protective gloss finish 1-inch square size fits all standard Audi key fobs High-tack adhesive backing—secure permanent hold Customisable design option for personalization Lightweight (negligible impact on key fob weight) Weather-resistant and UV-stable material Removes cleanly without residue if needed Complements both interior and exterior Audi upgrades Luxury detail at entry-level price point Compatible with all Audi key fob generations Compatibility Audi Model Compatibility A1, A2, A3 (All Years) Direct Fit A4, A5, A6, A7 (All Years) Direct Fit Q2, Q3, Q5, Q7, Q8 (All Years) Direct Fit TT, R8, RS Models (All Years) Direct Fit Pre-2010 Audi Models Verify Fob Size Installation Difficulty: Beginner | Time: 2 minutes Clean the key fob surface with a dry, lint-free cloth. Remove any dust, oils, or debris. Peel back the protective backing from the sticker adhesive carefully. Align the sticker with the key fob face. Centre it for balanced appearance. Press firmly across the entire sticker surface, working from centre outward to eliminate air bubbles. Allow 24 hours for adhesive to fully cure before heavy use. Note: Ensure your key fob is completely dry before application. For best results, avoid exposing the sticker to extreme heat or water submersion within the first 48 hours. Why Choose Victorious We're not just accessories suppliers—we're Audi enthusiasts who understand that every detail contributes to how you feel when you turn that key. Our carefully curated collection bridges the gap between OEM quality and aftermarket innovation, so you can upgrade your Audi with confidence. Ready to Elevate Your Details? Transform your key fob into a luxury accessory. Add this carbon fiber sticker to your cart today and discover why Audi owners trust Victorious. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars – 12,300+ Verified Reviews ✓ 30-Day Money-Back Guarantee 📦 Worldwide Shipping – DHL, FedEx, UPS, TNT 📞 Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with Audi AG, Volkswagen Group, or Audi of America. All brand names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory and is not endorsed by or connected to the manufacturer. Vehicle compatibility information is provided for reference only; please verify fitment with your specific model year and key fob variant before purchase.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Range Rover Evoque Center Console Gear Panel ABS Decorative Cover Trim (2012–2018) A precision-fit decorative trim panel that elevates the center console of your Evoque L538 with a choice of premium finishes — installed in minutes, no tools required. Evoque L538 2012–2018 ABS Construction 5 Finish Options No-Drill Install Gear Panel Trim Interior Upgrade Direct Fit Overview The Range Rover Evoque L538 was designed with a bold, fashion-forward interior — a cabin that deserves accessories which match its ambition. From the 2012 launch through to the final 2018 model year, the Evoque's center console is one of the most prominent visual focal points in the car, and one of the most touched surfaces in daily use. Over time, standard plastic panels show wear, and even on pristine examples, owners often want to inject a more personalised feel into the cabin. This center console gear panel cover trim is specifically designed and manufactured to the exact contours of the L538 Evoque's gear surround area. Constructed from high-quality ABS plastic, each piece is finished to a consistent, tactile standard and offered in five distinct styles: Carbon Fibre, Silver Chrome, Oak Wood Grain, Black Wood Grain — giving you genuine flexibility to match your existing interior spec or create a bespoke contrast look. Installation is entirely adhesive-based — no drilling, no cutting, no professional fitting required. The automotive-grade double-sided tape bonds securely to the OEM plastic surface and holds under temperature and vibration cycles typical of everyday driving. Whether you're refreshing a daily driver or detailing a show vehicle, this trim delivers a noticeable upgrade to one of the Evoque's most visible interior zones. What's Included 🎛️ Gear Panel Cover Trim 1× ABS decorative trim piece, pre-cut to Evoque L538 spec 🔧 Automotive Adhesive Tape Pre-applied 3M-style tape on reverse for tool-free fitting 📋 Fitment Instructions Step-by-step guide included with each order Product Highlights Precision-moulded to the exact profile of the Evoque L538 gear panel surround Available in 5 finishes: Carbon Fibre, Silver, Oak Wood Grain, Black Wood Grain High-grade ABS construction — rigid, lightweight and heat-resistant Chrome and wood-grain variants feature multi-layer surface treatment for depth and durability Automotive adhesive tape pre-applied — no tools, no drilling, no bodywork impact Covers existing wear, scuffs or fading on the OEM gear panel trim Compatible with both left-hand drive and right-hand drive Evoque variants Direct overlay design — fits cleanly over factory panel without modification Resistant to UV fading and typical in-cabin temperature fluctuations Immediately enhances the perceived quality and visual character of the center console Compatibility Vehicle Code Year Range Fitment Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque (Facelift) L538 2015–2018 Direct Fit Range Rover Evoque Convertible L538 2016–2018 Direct Fit Range Rover Evoque (New Gen) L551 2019–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Thoroughly clean the existing gear panel trim surface using an isopropyl alcohol wipe or trim prep spray. Ensure the surface is completely free of dust, grease and moisture before proceeding. Dry-fit the cover trim piece against the panel to confirm alignment and positioning before committing to adhesion. Check all edges sit flush with no lifting at the corners. Peel back the protective liner from the pre-applied automotive adhesive tape on the rear of the trim piece, exposing the bonding surface. Carefully align the trim with the panel and press firmly from the centre outward, applying consistent pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure fully — ideally leaving the vehicle undisturbed for 24 hours at room temperature before driving in extreme conditions. Avoid washing the interior surface during this cure period. ⚠ Note: Surface temperature affects adhesion quality. Do not attempt installation in a cold environment (below 10°C / 50°F). If your vehicle has been sitting in direct sunlight, allow the cabin to cool before fitting. Failure to properly clean and dry the surface is the most common cause of adhesive bond failure. Upgrade Your Evoque Interior Today Explore the full range of Range Rover Evoque L538 accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover and related vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious · Tesla Model 3 · Interior Protection Matte Central Dashboard Cover for Tesla Model 3 Premium TPU protection with a refined matte finish—designed for 2017–2019 Model 3 owners who demand both style and durability. T3 2017–2019 TPU Material Matte Finish Laser-Cut Overview Your Tesla Model 3's central dashboard is one of the most visible and frequently touched surfaces in the cabin. From sunlight exposure to daily contact, it's vulnerable to scratches, scuffs, dust, and UV degradation. This premium matte dashboard cover protects that critical touchpoint while maintaining the modern, understated aesthetic of your interior. Crafted from high-quality TPU (thermoplastic polyurethane), this cover combines softness with durability. The matte finish delivers a sophisticated, non-reflective surface that complements the minimalist design language of the Model 3, while precision laser-cutting ensures every edge sits flush against the original dashboard contours. Installation takes under 5 minutes with a simple peel-and-stick application—no tools, no permanent adhesive, completely reversible. Whether you're protecting your investment or refreshing your interior aesthetic, this cover delivers both protection and understated style. What's Included 📦 Matte Central Dashboard Cover Precision laser-cut TPU with matte finish 📋 Installation Instructions Step-by-step guide with prep checklist Product Highlights High-quality TPU material resists scratches, scuffs, and UV fading Matte finish eliminates gloss and reflections for a refined look Precision laser-cut for perfect alignment with Model 3 dashboard Peel-and-stick application—installs in under 5 minutes Fully reversible, no permanent adhesive or damage to original finish Protects against fingerprints, dust, and daily wear Compatible with 2017–2019 Model 3 (all trim levels) Easy to clean—simply wipe with a soft, dry cloth Maintains dashboard functionality and touch sensitivity Modern aesthetic complements Tesla's minimalist interior design Compatibility Model Year Range Compatibility Tesla Model 3 2017–2019 Direct Fit Tesla Model 3 2020–Present Not Compatible All Other Models — Not Compatible Installation Difficulty Level: Easy | Time Required: Under 5 minutes Prepare the surface: Clean the central dashboard thoroughly with a soft, dry microfiber cloth. Ensure all dust, oils, and residue are removed. Wait 2–3 minutes to allow the surface to dry completely. Inspect the cover: Carefully remove the dashboard cover from its packaging. Check that all edges are intact and lay it flat on a clean surface. Position the cover: Align the cover with the edges of your central dashboard. Take your time to center it properly before pressing down. Apply gently: Starting from the center, slowly peel back the adhesive backing while pressing the cover firmly onto the dashboard with smooth, even pressure. Work outward toward the edges to avoid air bubbles. Secure the edges: Press firmly around all perimeter edges to ensure a strong, lasting bond. Allow the adhesive to set for 24 hours before washing or touching the cover. Note: Dashboard surface must be clean, dry, and free of oils for optimal adhesion. Do not apply in direct sunlight or temperatures below 10°C. Allow full cure time before cleaning. Protect Your Model 3 Today Upgrade your interior with the refined look and durability of a matte dashboard cover. Designed for Tesla Model 3 owners who care about their vehicle's appearance and longevity. Shop Now Code: 22GET20 — 20% off any 2 items ✓ 30-day money-back guarantee ✓ 12,300+ verified reviews ✓ Worldwide shipping ✓ Expert support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla Inc., Elon Musk, or any official Tesla entity. All product names, logos, and trademarks are the property of their respective owners. This dashboard cover is an aftermarket accessory designed for compatibility with the specified vehicle model and year range.

Victorious · Tesla · Interior Car Phone Holder for Tesla Model 3 Premium dashboard-mounted phone holder engineered for Tesla Model 3 interiors—keeps your device secure, accessible, and distraction-free on every journey. Model 3 2021–2025 Carbon Fiber Dashboard Mount 4–7 inch Phones Overview The Tesla Model 3 demands thoughtful interior accessories that match its minimalist design philosophy and precision engineering. This Car Phone Holder is purpose-built to integrate seamlessly into your Model 3's dashboard, offering a secure mounting point that doesn't compromise the clean aesthetic you paid for. Advanced grip technology keeps your phone locked in position even during acceleration, cornering, and bumpy roads—so your device stays where it should be, not sliding across the cabin. The premium carbon fiber finish echoes the design language of your Model 3's trim and bezels, creating a cohesive, integrated appearance. Whether you're using navigation, taking calls via Bluetooth, or accessing vehicle controls, having your phone within sight and reach—without dashboard glare or steering wheel interference—is essential for safe, distraction-minimized driving. This mount delivers exactly that. What's Included 📱 Car Phone Holder Carbon fiber finish, ready to mount 📋 Installation Guide Step-by-step instructions included Product Highlights Advanced secure grip technology—stable on all road surfaces Accommodates phones 4–7 inches wide—universal compatibility Premium carbon fiber finish—matches Model 3 interior design Minimizes driver distraction—phone at glance, not in hand Durable composite materials—engineered for long-term reliability Dashboard integration—seamless fit without aftermarket appearance No drilling required—clean installation, no permanent damage Easy phone access—quick release, one-handed operation Vibration dampening—reduces phone rattle and noise Works with all phone brands—iPhone, Samsung, OnePlus, Google Pixel Compatibility Tesla Model 3 Generation Years Compatibility Model 3 (Standard Range) 2021–2025 Direct Fit Model 3 (Long Range) 2021–2025 Direct Fit Model 3 (Performance) 2021–2025 Direct Fit Model 3 (Pre-2021 versions) 2018–2020 Not Compatible Model Y / S / X All years Not Compatible Installation Notes Difficulty: Easy | Time: 5–10 minutes Locate the designated dashboard mount point on your Model 3 (typically centre console area). Clean the mounting surface with a dry, lint-free cloth to remove dust and oils. Carefully align the holder base with the pre-cut fixture on your dashboard. Press firmly until you hear or feel a secure click—the adhesive backing creates a permanent bond. Allow 24 hours for full adhesive cure before mounting your phone. Insert your phone into the grip mechanism and test stability by gently tugging the device. Important: Do not mount this holder in a position that obstructs your view of the road, the instrument cluster, or the centre touchscreen. Verify placement before final installation. If your Model 3 has a recent interior refresh, confirm compatibility before purchase. Ready to Mount? Keep your Tesla Model 3 cabin clean, organised, and distraction-free. This premium phone holder integrates with your interior design and keeps your device secure on every drive. Shop now and drive smarter. Shop Phone Holder Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT ✅ 30-day money-back guarantee Victorious Automotive is an independent automotive accessory specialist and is not affiliated with, endorsed by, or connected to Tesla, Inc., Elon Musk, or any official Tesla brand. Tesla is a registered trademark of Tesla, Inc. This product is designed for aftermarket use on Tesla vehicles and does not represent official Tesla manufacturing or design.

```html Tesla · Model 3 · Interior Privacy Webcam Cover for Tesla Model 3 2017–2019 Discreet sliding cover that protects your privacy without compromising interior aesthetics. Model 3 2017–2019 Interior Privacy Protection Slide Mechanism Overview Your Tesla Model 3 cabin camera is a clever safety feature—but that doesn't mean you need to live with constant surveillance in your personal space. This purpose-built webcam cover gives you complete control over when the camera operates, without removing or damaging the device. Engineered for the 2017–2019 Model 3, this cover slides silently into place with zero fuss. The slim profile means it sits flush against the interior trim, preserving the clean lines of your dashboard. Made from premium, durable material that resists wear and fingerprints, it's designed to become invisible once installed. Whether you're protecting your privacy during stationary moments or simply want peace of mind that your personal conversations stay private, this cover delivers effortless reassurance every time you get behind the wheel. What's Included 📦 1 × Webcam Cover Premium black finish, precision-fitted 📋 Installation Guide Step-by-step instructions with diagrams Product Highlights Smooth slide mechanism for one-handed operation Fits 2017–2019 Model 3 interior camera perfectly Ultra-thin design (0.03") blends seamlessly with trim Premium black finish matches factory aesthetic Durable material resists scratching and discolouration No permanent adhesive—fully reversible installation Clean surface preparation required for optimal grip Lightweight and balanced for silent operation Dimensions: 1.2 × 0.5 inches (precision engineered) Backed by 30-day money-back guarantee Compatibility Model Year Model Code Compatibility 2017–2019 Model 3 Base / Standard Range Direct Fit 2017–2019 Model 3 Performance Direct Fit 2020+ Model 3 All variants Not Compatible Installation Notes Difficulty: Beginner | Time: 2–3 minutes Clean the camera lens and surrounding area with a dry, lint-free cloth. Ensure the surface is completely dry before proceeding. Position the cover directly over the camera lens. Slide gently into place until you hear a soft click. Verify smooth operation by sliding back and forth once. Important: Do not force the cover. If resistance is felt, check alignment and reposition. Always use a clean, dry surface for best adhesion and longevity. Ready to Reclaim Your Privacy? Protect your personal space with a product engineered specifically for Tesla Model 3 owners. Simple to install, invisible when deployed, and backed by our 30-day guarantee. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping ✓ Expert Support Disclaimer: This product is not affiliated with, endorsed by, or produced in partnership with Tesla, Inc. Tesla is a registered trademark of Tesla, Inc. This cover is an aftermarket accessory designed for compatibility with Tesla vehicles. ```

Vehicle Interior · Tesla Model 3 · Safety & Decoration 8-Piece Door Exit Sticker Decal Set for Tesla Model 3 Professional-grade vinyl decals that clarify door exit points and enhance interior safety in seconds. Tesla Model 3 Oracal Vinyl Weather-Resistant Interior Decoration Easy Install Overview Tesla Model 3 owners demand clarity and precision in every detail—from performance metrics to cabin aesthetics. These eight-piece door exit decals address a practical concern: passengers sometimes fumble with door handles or misidentify exit points, especially in low light. Our solution combines safety with style, delivering professional-grade vinyl decals that mark exit buttons clearly while adding a polished finish to your interior. Built from durable Oracal vinyl, each decal resists weather extremes and daily wear. Installation takes under five minutes with no tools required, and removal leaves zero residue. You receive two complete matched sets—four driver-side and four passenger-side decals—with transfer tape and step-by-step instructions included. Whether you're protecting first-time passengers or simply elevating your cabin's attention to detail, these decals are an essential addition to any Model 3 owner's accessory lineup. What's Included 📋 4× Driver Side Decals Exit point markers for driver doors 📋 4× Passenger Side Decals Exit point markers for passenger doors 🎯 Transfer Tape Aids precise, bubble-free application 📖 Installation Guide Clear visual step-by-step instructions Product Highlights Premium Oracal vinyl construction—engineered for durability Weather-resistant and UV-stable—no fading or peeling Minimizes accidental or confused door openings Clearly marks exit button location for all passengers Sub-5-minute installation—no tools, no mess Residue-free removal—no damage to interior trim Professional finish—elevates cabin aesthetics Includes complete matched set for entire vehicle Transfer tape supplied for flawless application Brand new and factory-sealed Compatibility Model Year Range Compatibility Tesla Model 3 2017–2024 Direct Fit Tesla Model 3 Performance 2017–2024 Direct Fit Tesla Model Y 2020–2024 Not Compatible Tesla Model S 2016–2024 Not Compatible Installation Notes Difficulty Level: Beginner | Time: 5 Minutes Clean the door panel surfaces with a dry, lint-free cloth. Allow to dry completely. Cut decals to size if needed using the supplied template as a guide. Apply transfer tape over the front of each decal to hold it together during application. Peel the backing from the decal and carefully position on the door exit button area. Smooth firmly from center outward to remove air bubbles using a squeegee or credit card edge. Gently peel away the transfer tape at a low angle, leaving the vinyl in place. Allow adhesive to cure for 24 hours before heavy contact. Note: Clean surface ensures maximum adhesion. If removal is needed, heat lightly with a hair dryer and peel slowly to avoid any potential paint damage. Test on an inconspicuous area first if concerned. Upgrade Your Model 3 Interior Today Simple, professional, practical. These door exit decals deliver safety and style in one seamless package. Order now and protect your passengers while elevating your cabin's attention to detail. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ Reviews ✓ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc., Elon Musk, or any Tesla subsidiaries. Tesla is a registered trademark of Tesla, Inc. Product names, logos, and brands mentioned herein are the property of their respective trademark holders and are used for identification purposes only. All product descriptions and claims are made independently by Victorious Automotive.

Victorious · Tesla Model 3 · Interior Aluminum Alloy Foot Pedals for Tesla Model 3 Premium aluminum foot pedals that elevate your Model 3 interior with sporty style and superior grip. Model 3 2017–2024 Aluminum Alloy Anti-Slip Rubber Tool-Free Install Overview Tesla Model 3 owners who take pride in their vehicle's interior know that small details create a complete cabin experience. These aluminum alloy foot pedals are designed to replace your factory pedals with a set that delivers both aesthetic refinement and practical performance. Crafted from high-grade aluminum alloy and paired with premium anti-slip rubber inserts, these pedals offer enhanced grip in all weather conditions while adding a contemporary, sportier dimension to your driving environment. The sleek finish complements the Model 3's minimalist design philosophy without feeling out of place. Installation requires no special tools—the pedals mount directly onto your existing hardware in minutes. Whether you're choosing the 2-piece or 3-piece configuration, you're getting a thoughtfully engineered upgrade that transforms an everyday control into a focal point of interior refinement. What's Included 📦 Foot Pedal Set 2-piece or 3-piece configuration 📋 Installation Guide Step-by-step photo instructions Product Highlights Aerospace-grade aluminum alloy construction Bonded anti-slip rubber insert pads Direct-fit design for Model 3 (all years) Tool-free, no-drill installation Corrosion-resistant finish Ergonomic pedal geometry Available in 2-piece or 3-piece sets Enhances cabin aesthetic instantly Durable rubber lasts 3–5 years 30-day money-back guarantee Compatibility Configuration Model 3 (2017–2024) 2-Piece Set (Accelerator & Brake) Direct Fit 3-Piece Set (Accelerator, Brake & Deadpedal) Direct Fit Installation Quick Swap – Under 10 Minutes Remove factory pedals: Locate the pedal mounting bracket beneath the dashboard. Use gentle pressure to release and slide out the existing pedal assembly. Position new pedal: Align the aluminum pedal with the mounting points. The rubberized backing will grip the bracket securely. Secure in place: Press down firmly until you hear or feel a click—no fasteners required. Test operation: Press gently to confirm smooth movement and proper positioning. Repeat for remaining pedals: Follow the same process for brake and (if selected) deadpedal. Before You Begin: Ensure your vehicle is powered down and in Park. Do not attempt removal while the car is in motion or with Autopilot active. Upgrade Your Model 3 Interior Today Premium aluminum pedals are the easiest way to personalize your cabin. In just minutes, you'll have a sportier, more refined driving environment that reflects your attention to detail. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🔄 30-Day Guarantee – Full Refund 🌍 Worldwide Shipping – DHL, FedEx, UPS 📞 Support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket supplier. We are not affiliated with Tesla, Inc., or any official Tesla subsidiary. All product names and vehicle designations are used for compatibility reference only. Modifications may affect your vehicle's warranty—consult your dealer before installation.

Victorious · Tesla Model 3 · Interior Protection 15 Inch Tempered Glass Screen Protector for Tesla Model 3 Navigation System Premium clarity and responsive touch sensitivity with an anti-fingerprint oleophobic coating designed specifically for your Model 3's central display. Model 3 2017–2026 Tempered Glass 15" Display Fingerprint Resistant Custom Fit Overview Your Tesla Model 3's centre display is the nerve centre of your vehicle—controlling navigation, climate, media, and vehicle settings. It takes constant contact from fingers, sun exposure, and dust ingress. A quality screen protector isn't optional; it's essential maintenance to preserve touch responsiveness and clarity. This 15-inch tempered glass protector is engineered specifically for the Model 3 touchscreen. Precision-cut to fit perfectly without gaps or overhang, it integrates seamlessly with your cabin's aesthetic while delivering industrial-grade hardness and optical clarity. The oleophobic coating minimises fingerprints and oil smudges, keeping your display looking crisp even under motorway sun. Unlike cheaper plastic alternatives, tempered glass preserves 99% light transmission and supports full-pressure touch input. Installation takes under 5 minutes and requires no adhesives—just careful alignment and light contact. One-time investment, years of protection. What's Included 🛡️ Tempered Glass Protector Precision-cut for Model 3, 229.2 × 349.99 mm ✨ Oleophobic Coating Anti-fingerprint, anti-smudge finish 🧹 Microfiber Cleaning Cloth Includes lint-free cloth for installation prep 📋 Installation Guide Step-by-step instructions and alignment tips Product Highlights Premium tempered glass with 9H surface hardness—resists scratches and minor impacts Crystal-clear optical transmission (99%)—preserves display colour vibrancy and contrast Full touch responsiveness—no pressure loss or lag compared to bare screen Oleophobic coating—minimises fingerprints and smudging for a cleaner look Perfect custom fit—pre-cut to Model 3 dimensions, no trimming required Dust-resistant edges—designed to sit flush, preventing debris accumulation Easy installation—dry application, no adhesive mess or curing time Simple maintenance—clean with microfibre cloth and distilled water only Precision alignment markers—printed guides help with first-time placement Backed by 30-day money-back guarantee—if you're not satisfied, we'll refund you Compatibility Model 3 Variant Years Status Model 3 (Standard Range / RWD) 2017–2026 Direct Fit Model 3 (Long Range / AWD) 2017–2026 Direct Fit Model 3 Performance 2017–2026 Direct Fit Model 3 Highland (Refreshed) 2024–2026 Direct Fit Other Tesla models (S, X, Y, Roadster) All years Not Compatible Installation ⚙️ Installation Overview Difficulty: Easy | Time Required: 5 minutes | Tools Needed: Microfibre cloth only Steps Power off your vehicle or place it in Park with the display active. Use the microfibre cloth to clean the screen thoroughly—remove dust, fingerprints, and oils. Allow 2 minutes for any moisture to evaporate. Carefully peel the protective backing from the tempered glass protector. Avoid touching the adhesive-free side. Align the protector using the edge markers printed on the glass. Start from the top centre and gently lower it onto the screen. Once positioned, press lightly from centre outward to ensure full contact. Avoid hard pressure—let the glass settle naturally. Allow the protector to set for 10 minutes before using the touchscreen. ⚠️ Note: If bubbles appear after installation, gently lift a corner and press again. Tiny air pockets (under 2mm) will disappear within 24 hours as the glass stabilises. Never use heat or hairdryers to accelerate curing. Protect Your Model 3's Display Today A small investment now prevents costly screen repairs later. This tempered glass protector keeps your navigation system crystal-clear and responsive for every journey. Shop Screen Protector Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm This product is not affiliated with, endorsed by, or a product of Tesla, Inc. Tesla is a registered trademark of Tesla, Inc. This screen protector is an aftermarket accessory designed for compatibility with Tesla Model 3 vehicles. ```

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Aluminum Alloy Door Speaker Cover Panel Trim – Range Rover Evoque 2019–2020 (Set of 4) Precision-machined aluminum speaker surrounds that replace the factory plastic covers, delivering a cleaner, more premium interior finish with zero permanent modification to your Evoque. Evoque L538 2019–2020 Aluminum Alloy Set of 4 Direct Fit No Drilling Interior Trim Speaker Panel Overview The Range Rover Evoque L538 — particularly in its 2019 and 2020 model year guise — is a vehicle that straddles the line between urban sophistication and genuine off-road capability. Its interior is well-appointed, but for owners who expect every surface to reflect the premium character of the Range Rover name, the factory door speaker surrounds leave room for improvement. The standard plastic covers, while functional, can look incongruous against the Evoque's more refined interior panels and contrast stitching. This set of four aluminum alloy door speaker cover panel trims is designed as a direct-fit upgrade for the 2019 and 2020 Range Rover Evoque. Each piece is formed from high-grade aluminum alloy, lightly machined and finished to complement the Evoque's interior aesthetic. The result is a more cohesive, premium look across all four doors — transforming one of the most frequently seen interior details into a genuine design statement. Fitting requires no permanent modification, no drilling, and no specialist tools. The panels locate precisely using the existing speaker apertures and surrounding trim geometry, making this one of the most rewarding interior upgrades per unit of effort. Whether you're refreshing a tired interior or simply elevating an already well-cared-for Evoque, these speaker trims deliver an immediately visible improvement in material quality and visual finish. What's Included 🔲 Front Left Speaker Cover Driver's door aluminum trim panel 🔲 Front Right Speaker Cover Passenger door aluminum trim panel 🔲 Rear Left Speaker Cover Rear driver-side aluminum trim panel 🔲 Rear Right Speaker Cover Rear passenger-side aluminum trim panel 📋 Fitting Guide Step-by-step installation reference Product Highlights CNC-machined aluminum alloy construction for a genuine premium feel Direct replacement for factory plastic speaker surrounds — no modifications required Precise fit engineered specifically for the 2019–2020 Evoque L538 Covers all four doors for a consistent, uniform interior upgrade Lightweight material that does not add measurable mass to door panels Corrosion-resistant finish suited to daily use and varying climates Retains full acoustic function — speaker performance is unaffected Clean, tool-light installation achievable in under 30 minutes Reversible — original panels can be refitted at any time without damage Pairs well with other aluminum interior trim upgrades for a cohesive finish Compatibility Vehicle Code Year Range Fit Range Rover Evoque L538 2019–2020 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2024 Not Compatible Range Rover Evoque L538 2011–2018 Not Confirmed Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Plastic trim pry tool, microfibre cloth Ensure the vehicle interior is clean and at room temperature before starting. Cold plastics can be more brittle and harder to disengage safely. Using a plastic trim removal tool, carefully disengage the existing factory speaker cover panel from each door. Work around the perimeter gently to release any clips without cracking the surrounding door card. Set the original panels aside in a safe location — retain them in the event you wish to return the vehicle to factory specification. Wipe the speaker aperture area with a clean microfibre cloth to remove any dust or residue before fitting the new aluminum panels. Align each aluminum speaker cover with the corresponding door aperture, ensuring the panel sits flush against the surrounding trim surface. Apply firm, even pressure around the panel perimeter to seat any retaining clips fully. Confirm each panel is secure and flush before moving to the next door. Repeat for all four doors. Check each cover from multiple angles in natural light to confirm uniform fit and finish. ⚠ Note: Take care when removing original speaker covers if the door cards are fitted with Meridian or premium audio speakers — avoid placing any pressure directly on the speaker cone or grille mesh during removal. If any panel does not locate cleanly, do not force-fit. Contact us on +44 203 943 9919 before proceeding. Upgrade Your Evoque Interior Small details define how a vehicle feels every day. These aluminum speaker covers are the kind of upgrade that Evoque owners notice immediately — and visitors notice without knowing quite why the interior looks so considered. Shop the full Range Rover Evoque accessories collection at Victorious and build the interior your Evoque deserves. Shop Evoque Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque · Interior Accessories Console Storage Box & Phone Tray for Range Rover Evoque 2019–2020 (L551) A precision-fit centre console storage and phone tray that transforms wasted space in your Evoque into a clean, organised and practical everyday solution. Evoque L551 2019–2020 Direct Fit ABS Plastic Black No Drilling Interior Trim Phone Tray ISO9001 Certified Overview The second-generation Range Rover Evoque, launched in 2019, brought a significantly more sophisticated interior to the compact luxury SUV segment. Its centre console area, while well-designed, leaves room for improvement when it comes to day-to-day practicality — particularly when it comes to keeping your phone, keys and small items within reach and neatly contained. This is precisely the gap this accessory is engineered to fill. This console storage box and phone tray is designed exclusively for the 2019 and 2020 model year Range Rover Evoque (L551). Manufactured from high-grade ABS plastic and finished in a clean matte black, it integrates seamlessly into the existing centre console architecture without any modification to your vehicle. The result is a purposeful addition that looks as though it belongs — because it was made to. Whether it's keeping your smartphone off the seat, corralling loose change, or simply bringing order to the console area on long drives, this tray delivers a marked improvement in interior organisation. Lightweight at just 50g and sized at 15cm × 10cm × 8cm, it slots in cleanly and stays in place. A small upgrade with a daily impact every Evoque owner will appreciate. What's Included 📦 Console Storage Tray Main unit — ABS plastic, matte black finish 📱 Phone Holder Section Integrated slot sized for modern smartphones 🔧 Fitting Hardware Clips / retention tabs for secure placement 📄 Installation Guide Simple reference sheet for fitment Product Highlights Precision-engineered exclusively for the 2019–2020 Range Rover Evoque L551 High-quality ABS plastic construction — durable, lightweight and heat-resistant Matte black finish matches the Evoque's factory interior trim tones Dedicated phone tray keeps your device secure and within easy reach Additional storage compartment for cards, keys, coins or cables Tool-free installation — no drilling, cutting or adhesive required Featherlight at just 50g — no impact on console functionality Compact footprint: 15cm × 10cm × 8cm — fits without blocking controls ISO9001 certified manufacturing process ensures consistent quality Reversible fit — remove cleanly whenever required with no marks left behind Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L551 (2nd Gen) 2019 Direct Fit Range Rover Evoque L551 (2nd Gen) 2020 Direct Fit Range Rover Evoque L538 (1st Gen) 2011–2018 Not Compatible Range Rover Evoque L551 (2nd Gen) 2021+ Verify Before Purchase Discovery Sport L550 2019–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure your Evoque's centre console area is clean and free of debris before fitting. Remove any existing items from the console storage zone where the tray will sit. Align the storage tray with the console cavity, ensuring the phone slot faces toward the driver or front passenger as preferred. Press the tray gently but firmly into position until the retention clips or tabs engage with the console surround. Check that the tray sits flush and does not impede access to any console controls, gear selector, or charging pads. Place your phone or items in the tray to confirm a secure and comfortable fit before driving. ⚠ Please Note: Verify your Evoque's model year and generation (L551) before purchasing. The 2019 Evoque was the first year of the second-generation L551 platform. If you are unsure, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for you. Complete Your Evoque Interior Explore our full collection of Range Rover Evoque accessories — from interior trim upgrades to protective solutions — all curated for the discerning Evoque owner. Shop Range Rover Evoque Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Audi · A6/A7 C7 · Exhaust Styling Stainless Steel Chrome Exhaust Pipe Cover – Audi A6 A7 C7 2016–2018 Premium dual-pipe exhaust trim that elevates your A6/A7 rear end with polished stainless steel styling and simple adhesive installation. Audi A6 C7 Audi A7 C7 2016–2018 Stainless Steel No Drilling Pair Included Overview The Audi A6 and A7 (C7) command attention on the road—and your exhaust detail should too. This dual stainless steel chrome pipe cover transforms the rear bumper zone into a sharp, purposeful focal point that mirrors the sportier S and RS trim packages. Precision-engineered from heavy-gauge stainless steel, these covers arrive as a matched pair and install in minutes using included premium-grade adhesive tape. No drilling, no modifications, no compromise. The high-gloss chrome finish resists oxidation and maintains its shine across seasons, while the alternative matte black option offers a darker, more understated aesthetic. Whether you're refining a stock A6 or adding visual depth to an already-tuned sedan, these pipe covers deliver immediate curb presence and long-term durability that matches the quality of your Audi engineering. What's Included 📦 Dual Pipe Covers Left and right stainless steel trim pieces 🔧 Premium Adhesive Tape High-strength 3M-grade bond strips included 📖 Fitment Guide Clear positioning and prep instructions ✨ Two Finish Options Chrome or high-gloss black finishes Product Highlights Heavy-gauge stainless steel construction resists rust and oxidation Dual-pipe styling mimics sportier S / RS trim appearance Available in polished chrome or matte black finish Sold as a pair – left and right covers included Precision fit for A6 and A7 C7 2016–2018 model years Adhesive installation – no drilling or permanent modification Premium-grade 3M tape ensures years of secure fitment Weather-resistant and UV-stable finish Enhances rear bumper visual presence and sporty appeal Easy removal if desired – leaves no residue or damage Compatibility Model Years Body Type Fit Status Audi A6 C7 2016–2018 Sedan Direct Fit Audi A7 C7 2016–2018 Fastback Direct Fit Audi A6 C8 2019+ Sedan Not Compatible Audi A7 C8 2019+ Fastback Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Prepare the surface: Clean the rear bumper exhaust area thoroughly with soap and water. Dry completely and lightly wipe with a clean microfibre cloth. Remove any dirt, tar, or residue with automotive degreaser if needed. Heat the adhesive: Briefly warm the included adhesive tape strips with a heat gun or lighter (hold 3–4 inches away). Do not overheat—warm to touch is sufficient. This activates the 3M bond. Position the covers: Align the left and right covers symmetrically around your existing exhaust pipe openings. Mark the position lightly with a chinagraph pencil for reference. Apply adhesive: Peel the backing from the tape and press firmly onto the bumper for 30 seconds per side, maintaining even pressure across the full contact area. Allow cure time: Wait 24 hours before exposing the vehicle to water or driving. The bond continues to strengthen over 48–72 hours. Important: Surface temperature matters. Install in ambient conditions above 10°C for optimal adhesive performance. If removal is ever needed, warm the cover gently and peel slowly to avoid bumper paint damage. Elevate Your A6 / A7 Today Premium stainless steel exhaust trim that speaks the language of your Audi's engineering. Installed in minutes. Built to last. Order now and step into the sporting aesthetic your sedan deserves. Add to Cart Save 20% when you bundle with another item Code: 22GET20 4.9/5 – 12,300+ reviews 🌍 Worldwide shipping via DHL / FedEx ✓ 30-day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Audi AG, Volkswagen Group, or Audi Sport. All vehicle names and logos are registered trademarks of their respective manufacturers and are used solely for identification and compatibility purposes. This product is designed to fit the specified Audi models and is not an OEM part.

Victorious Automotive · Mercedes-Benz · Exterior Trim Chrome Front Fog Lamp Cover Trim for Mercedes-Benz E-Class W213 Premium polished chrome trim elevates your E-Class exterior with a refined, integrated aesthetic. W213 2016–2017 Chrome ABS E200/E300/E43 AMG Fog Lamp Trim Overview Designed specifically for the 2016–2017 Mercedes-Benz E-Class W213, these chrome front fog lamp cover trims are engineered to enhance the vehicle's forward-facing design language. The E-Class demands precision and elegance—these trims deliver both in equal measure, creating a cohesive, factory-finished appearance that elevates the entire front fascia. Manufactured from premium ABS chrome with a polished finish, each trim has been precisely custom-fitted to integrate seamlessly with your vehicle's contours. Installation is straightforward—double-sided adhesive backing means no drilling, welding, or permanent modifications. The result: a sophisticated upgrade that looks and feels like it left Stuttgart. Every set is manufactured in an ISO9001 certified facility, guaranteeing longevity and resistance to weathering, UV exposure, and road salt. These aren't generic trim pieces—they're meticulous recreations of OEM-style accessories built for discerning owners who expect nothing less than perfection. What's Included ✦ 4-Piece Chrome Fog Lamp Trim Set Direct-fit pair for each side, front passenger and driver 📦 Premium Adhesive Backing Pre-applied double-sided tape for tool-free installation 📋 Fitment Guide Step-by-step installation instructions included 🛡️ 30-Day Money-Back Guarantee Full refund if not entirely satisfied with fit or finish Product Highlights Polished ABS Chrome finish with UV-resistant coating Precision-engineered for W213 E-Class (2016–2017) ISO9001 certified manufacturing for assured quality Double-sided adhesive backing—no drilling required Compatible with E200, E300, and E43 AMG variants Factory-finished appearance, seamless integration Weather and salt-resistant design for longevity 4-piece set covers both front fog lamp areas Easy installation in under 30 minutes Professional detailing without professional installation costs Compatibility Model Year Range Variants Fitment Mercedes-Benz E-Class W213 2016–2017 E200, E300, E43 AMG Direct Fit E-Class W213 (2018+) 2018 onwards All variants Not Compatible C-Class, S-Class, GLC All years All variants Not Compatible Note: Always verify your vehicle's production year and chassis code (W213) before purchase. These trims are designed exclusively for 2016–2017 E-Class models. Installation Difficulty: Easy | Time: 20–30 minutes Prepare the surface: Clean the fog lamp area thoroughly with isopropyl alcohol and allow to dry completely. Remove any dirt, grease, or wax that could compromise adhesion. Position the trim: Carefully align the chrome trim piece with the fog lamp surround. Check alignment from multiple angles before committing to adhesive contact. Apply with pressure: Once positioned, press firmly across the entire trim for 30–60 seconds. The double-sided adhesive will begin bonding immediately. Repeat for all pieces: Apply the remaining three trim pieces following the same process. Ensure symmetrical spacing and alignment across both sides. Allow full cure: Leave the vehicle undisturbed for 24 hours before washing or driving in wet conditions. Full adhesive strength develops within this timeframe. Important: Do not wet-wash or apply pressure to trims within 24 hours of installation. Ensure the surface temperature is between 50–85°F during application for optimal adhesive performance. Finish Your E-Class Upgrade These chrome fog lamp trims are the finishing touch every detail-oriented E-Class owner deserves. Precision fit, premium materials, and a factory-finished appearance—all without the dealership price tag. Add to Cart Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ verified reviews 🚚 Worldwide — DHL, FedEx, UPS, TNT ✓ 30-Day — Money-back guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or an official partner of Mercedes-Benz, Daimler AG, or any official Mercedes distributor. All product names, logos, and brands are the property of their respective owners. This product is designed as an aftermarket accessory and is sold independently.

BMW · Fuel Tank · Exterior Trim Aluminum Alloy Fuel Tank Cap Cover Trim for BMW Premium anodized fuel cap trim that elevates your BMW's exterior with a refined, modern finish in your choice of striking colors. BMW 2011–2017 Aluminum Alloy 20g Lightweight Double-Sided Tape ISO9001 Certified Overview BMW owners who demand precision and aesthetic refinement will find this Aluminum Alloy Fuel Tank Cap Cover Trim an essential finishing touch. Engineered specifically for select BMW models between 2011 and 2017, it transforms a utilitarian component into a statement of design intent. Crafted from high-quality, lightweight aluminum alloy and finished with professional-grade anodizing, this cover combines durability with visual impact. Available in vibrant red and blue, each trim is precision-manufactured to exacting tolerances and certified to ISO9001 standards—the same benchmarks BMW itself employs. Installation is effortless: simply clean the fuel cap housing and apply the included double-sided tape. Within minutes, your BMW's fuel cap transitions from OEM plastic to a premium accent that catches light and commands attention. Perfect for those who refuse to overlook the details. What's Included 🛡️ 1× Fuel Tank Cap Cover Trim Anodized aluminum alloy construction 📎 Double-Sided Adhesive Tape Pre-applied for secure, lasting hold 📋 Installation Guide Step-by-step instructions included ✓ Quality Certification ISO9001 tested and verified Product Highlights High-grade lightweight aluminum alloy with anodized finish Available in striking red and vibrant blue colorways Precision-engineered for perfect fuel cap alignment ISO9001 manufacturing certification ensures quality consistency Pre-applied double-sided tape for tool-free installation Weighs only 20g—zero impact on vehicle performance Weather-resistant anodized coating resists corrosion and fading Designed for BMW 2011–2017 model year compatibility Professional finish elevates exterior detailing instantly No permanent modifications—easily removable if desired Compatibility Year Range Gas Models Diesel Models Status 2011–2017 ✓ Compatible ✓ Compatible Direct Fit 2018+ ✗ Not Compatible ✗ Not Compatible Not Recommended Pre-2011 ✗ Not Compatible ✗ Not Compatible Not Recommended Colour Options: Red or Blue. Please select your preferred finish at checkout. Both colours are available for 2011–2017 BMW gas and diesel models. Installation Time Required: 5–10 minutes | Difficulty: Beginner | Tools: None Locate the fuel tank cap: Open your fuel door and locate the fuel cap on the side of your BMW. Clean the surface: Wipe the fuel cap housing thoroughly with a clean, dry cloth to remove dust, dirt, and any residue. Allow to dry completely. Peel the backing: Carefully remove the protective backing from the double-sided tape on the trim. Align and press: Gently align the aluminum trim over the fuel cap housing, ensuring it sits flush and symmetrical. Press firmly for 10–15 seconds to establish a secure bond. Allow to cure: Wait 24 hours before refuelling to allow the adhesive to reach full strength. Enjoy: Step back and admire your BMW's elevated aesthetic. Important: Ensure the fuel cap housing is completely clean and dry before application. A contaminated surface will compromise adhesive bond strength. If the trim does not adhere properly, carefully peel it away and reapply following the steps above. Ready to Elevate Your BMW? This fuel tank cap trim is the kind of detail that separates meticulous ownership from the rest. Premium materials, flawless fit, and effortless installation—because every component of your BMW deserves to reflect your standards. Shop Fuel Tank Cap Trim Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to BMW AG, BMW North America, or any official BMW subsidiary. BMW is a registered trademark of Bayerische Motoren Werke AG. This product is designed for fit and compatibility purposes only and does not imply official endorsement or approval.

Victorious · Automotive · Keychain FORAUTO Wrench Key Chain – Premium Stainless Steel Spanner EDC Lightweight, durable stainless steel wrench keychain for everyday carry and vehicle maintenance access. Stainless Steel 6.5cm Length EDC Accessory FORAUTO Brand Spanner Design Overview For Land Rover, Range Rover, and Defender owners who take pride in their vehicles and their gear, every detail matters—including the tools you carry. This FORAUTO Wrench Key Chain is engineered as a practical EDC (everyday carry) accessory that combines form and function. Whether you're tending to your vehicle on the road or need a compact spanner within arm's reach, this keychain delivers reliable, no-fuss access. Built from premium stainless steel, this 6.5cm wrench keychain resists corrosion and weathering—essential for owners who frequently venture off-road or into challenging environments. At just 0.5g, it adds virtually no weight to your key ring or equipment bag, yet provides the mechanical advantage of a proper spanner when you need it most. The compact profile and durable construction make it an ideal companion for adventure, maintenance work, and everyday utility. Keep one on your keyring, toss one in your vehicle's glove box, or attach it to a carabiner on your adventure pack. It's the kind of small, thoughtful accessory that separates properly equipped enthusiasts from everyone else. What's Included 🔧 Wrench Key Chain FORAUTO Model 10759, premium stainless steel 📦 Packaging Secure retail packaging, ready to gift or deploy Product Highlights Precision-machined stainless steel construction for durability and corrosion resistance Lightweight design at 0.5g—barely noticeable on your keyring Functional spanner profile suitable for common fasteners and adjustments Compact 6.5cm × 2cm footprint for pocket or glove-box storage FORAUTO premium brand with reputation for automotive accessories Ideal EDC companion for overlanders, mechanics, and off-road enthusiasts Weather-resistant materials withstand rain, mud, and salt exposure Clean, minimal design that complements professional tool kits Versatile attachment—keyring, carabiner-compatible, or standalone carry Affordable, replaceable tool for multi-unit ownership or gifting Compatibility & Specifications Specification Detail Brand FORAUTO Model 10759 Item Type Key Ring / Spanner Material Premium Stainless Steel Length 6.5cm Width 2cm Weight 0.5g Finish Polished stainless steel Vehicle Compatibility Universal Compatible with all Land Rover, Range Rover, Defender, Discovery, Toyota Land Cruiser, Mercedes-G Class, and most automotive applications. Universal design works across all year ranges and trim levels. Installation & Deployment Getting Started Inspect the keychain. Remove from packaging and verify the stainless steel construction and spanner profile are undamaged. Choose your attachment method. Attach directly to an existing keyring, loop through a carabiner, or carry standalone in a pocket or glovebox. Position for access. Keep it where you're most likely to need it—vehicle key ring, equipment bag, or adventure pack. Test the function. Verify the spanner profile engages properly with common fasteners before relying on it in critical situations. Maintain regularly. Wipe clean after exposure to mud, salt, or moisture. Stainless steel resists corrosion but benefits from occasional care. Note: This wrench keychain is designed for light-duty, emergency, or supplementary use. For heavy mechanical work or primary tool kits, use full-size wrenches and professional-grade tools. Always ensure fasteners are properly tightened before driving or load-bearing applications. Ready to Upgrade Your EDC? Add this premium FORAUTO Wrench Key Chain to your vehicle setup, adventure pack, or gift collection. It's the small, thoughtful accessory that separates prepared owners from the rest. Add to Cart Use code 22GET20 for 20% off any 2 items. 4.9/5 · 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Defender, Toyota, Mercedes-Benz, or their parent companies. All trademarks, model names, and vehicle references are used for identification and compatibility purposes only. Product descriptions are for general informational use and do not constitute professional mechanical or technical advice. Always consult your vehicle's official service manual or a qualified technician for maintenance, repair, and installation guidance.

Victorious Automotive · Range Rover Sport L320 · Lighting Upgrades Ultra Bright SMD White LED Angel Eyes Halo Ring Daytime Running Light Kit — Range Rover Sport L320 (2003–2009) Transform the front-end presence of your early Range Rover Sport with crisp, high-output SMD LED halo rings that deliver both striking style and genuine DRL functionality — precision-fitted for the L320 platform. L320 2003–2009 SMD LED Angel Eyes Halo Ring Daytime Running Light 12V 3500LM CE Certified White HochiTech Plug & Play Overview The Range Rover Sport L320, produced between 2003 and 2009, remains one of the most purposeful and recognisable SUVs ever to wear the Land Rover badge. Its bold, squared-off headlight clusters gave it a distinctive road presence — but the era's halogen optics have always left room for improvement. For owners who want their L320 to look as commanding at standstill as it does on the road, this LED angel eye upgrade is one of the most effective and reversible modifications available. This kit from HochiTech features ultra-bright Surface Mounted Device (SMD) LED technology arranged in a precision halo ring format. Running at 12V and outputting a combined 3,500 lumens per set, the rings produce a clean, pure white light signature that integrates naturally into the L320's existing headlight housing. Whether used as daytime running lights, decorative illumination, or both, the visual impact is immediate and substantial — giving the front end a modern, premium feel without altering the factory aesthetic. Constructed from durable ABS housings with CE-certified LED arrays, this kit is built for long-term reliability. The lightweight design (just 350g for the full set) means there's no concern about placing additional load stress on your headlight assemblies. For any L320 owner who appreciates thoughtful, well-executed modifications, this halo ring DRL kit represents outstanding value and a meaningful visual upgrade. What's Included 💡 SMD LED Halo Rings Full set — one per headlight unit 🔌 Wiring Harness Pre-terminated leads for direct connection 🔩 Mounting Hardware ABS retention clips and brackets 📄 Installation Guide Step-by-step fitting reference Product Highlights Ultra-bright SMD LED technology for maximum light output 3,500 lumens per set — genuinely visible in all daylight conditions Pure white light output — clean, modern aesthetic Designed specifically for the Range Rover Sport L320 headlight cluster Functions as both decorative halo rings and daytime running lights Runs on standard 12V vehicle power — no relay modification required Durable ABS housing resists vibration and heat over time Lightweight at just 350g — no stress on headlight assembly CE certified for electrical safety and compliance Fully reversible installation — factory headlights unaltered Compatibility Vehicle Code Year Range Fitment Range Rover Sport L320 2003–2009 Direct Fit Range Rover Sport L320 2010–2013 Not Confirmed Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic hand tools, trim removal kit Safely disconnect the vehicle battery before beginning any work on the headlight assemblies. Remove the front bumper or access panel as required to gain clear access to the back of each headlight unit on the L320. Carefully detach the headlight assembly from its mounting points and disconnect the existing wiring loom connectors. Open the headlight housing (gentle heat from a heat gun may assist with sealed units) and position the SMD halo ring within the reflector bowl, securing with the supplied ABS clips. Route the wiring harness through the existing headlight grommet and connect to a switched 12V ignition feed or DRL circuit as preferred. Reassemble the headlight housing, refit the assembly, and reconnect all factory connectors before reattaching the battery. Test both halo rings before fully refitting any trim panels, confirming even illumination across each ring. ⚠ Important: This kit requires access to the interior of the headlight housing. Opening sealed headlight units may affect their weather resistance if not properly resealed. Use a suitable automotive adhesive sealant when reassembling. If in doubt, consult a qualified auto-electrician or lighting specialist. Always verify your local road traffic regulations regarding the use of additional lighting as DRLs. Upgrade Your L320's Lighting Today The Range Rover Sport deserves lighting that matches its character. This SMD LED angel eye kit is one of the simplest ways to modernise the front-end presence of your L320 — and we're here to help every step of the way. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes are used solely for fitment reference purposes. This product is an aftermarket accessory and is not a genuine Land Rover or JLR part.

Victorious · Tesla Model 3 · Interior Upgrades Red Carbon Indicator & Wiper Stalks for Tesla Model 3 Transform your Model 3's interior with premium red carbon fiber stalks that combine visual impact with enhanced durability. T3 2016–2019 Real Carbon Fiber Easy Install Overview Your Tesla Model 3 interior deserves components that match its precision engineering. These red carbon indicator and wiper stalks elevate your cockpit with a bold visual statement while maintaining OEM-quality fitment and durability. Machined from genuine carbon fiber rather than inferior wrap alternatives, these stalks deliver authentic texture and depth. The striking red finish creates contrast against the Model 3's neutral dashboard, catching light as you drive. Unlike painted finishes, real carbon fiber won't chip or fade—it improves with age and daily handling. Installation takes minutes using factory-grade double-sided adhesive. No drilling, no permanent modification. Remove them anytime without residue or damage. What's Included 🎯 Indicator Stalk Left side, directional control 💧 Wiper Stalk Right side, wiper operation 📋 Installation Guide Step-by-step photo instructions 🧹 Prep Cloth Isopropyl-treated for surface cleaning Product Highlights Genuine carbon fiber weave, not vinyl wrap or composite Seamless fit for Tesla Model 3 2016–2019 models Premium double-sided adhesive rated for high-contact areas Red finish complements OEM steering wheel and trim accents Increased tactile grip for daily directional and wiper control UV-stable finish resists fade and oxidation Lightweight—no added steering column strain Reversible installation with no permanent modifications Pairs seamlessly with carbon fiber steering wheels and trim kits 3-year warranty against manufacturing defects Compatibility Model & Year Status Tesla Model 3 (2016–2019) Direct Fit Tesla Model 3 (2020+) Not Compatible Tesla Model 3 Performance Direct Fit Tesla Model 3 Standard Range Direct Fit Installation Difficulty: Beginner | Time: 5–10 minutes Clean the stalk surfaces. Use the supplied prep cloth to wipe down both indicator and wiper stalks on your Model 3. Remove any dust, oils, or residue. Allow 1 minute to dry fully. Peel adhesive backing. Carefully remove the protective liner from the double-sided tape on the carbon fiber covers. Align and press. Position each stalk cover over its corresponding original stalk. Press firmly for 10 seconds to ensure full contact and adhesion. Allow curing time. Wait 24 hours before using the stalks to allow adhesive to reach full strength. ⚠️ Important: Ensure the dashboard surface temperature is between 60–80°F before installation. Cold conditions may reduce adhesive effectiveness. Do not force stalks into place; alignment should feel effortless. Complete Your Model 3's Carbon Interior Red carbon fiber stalks are just the beginning. Explore matching steering wheel wraps, door handle covers, and trim kits to create a fully integrated cockpit aesthetic. Shop All Model 3 Upgrades Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Tesla, Inc., or any official Tesla subsidiary. All product names and vehicle designations are used for identification and compatibility purposes only.

```html Jaguar · E-PACE / XE / XF / XJL · Interior Trim Mirror Trim for Jaguar XE, XF, XJL, F-Pace & E-Pace Premium interior mirror trim upgrade with precision-fit ABS construction for an instantly refined cabin aesthetic. E-PACE XE · XF · XJL · F-Pace ABS Trim Interior Easy Install Overview Jaguar owners understand that refined interiors demand attention to detail. This premium mirror trim set is engineered to elevate the cabin presence of your XE, XF, XJL, F-Pace or E-Pace with a factory-finished upgrade that catches light perfectly and transforms the mirror surrounds from standard trim to a statement piece. Each trim is precision-cut from high-quality ABS plastic, engineered to match original Jaguar panel gaps and profiles. The finish is designed to complement both modern and classic Jaguar interior palettes, enhancing perceived quality without requiring structural modifications. Installation is straightforward—this is a bolt-in enhancement that takes less than 30 minutes, with no tools beyond a basic trim removal set. Whether you're personalising a daily driver or adding finishing touches to an owned classic, this trim delivers professional results that rival dealer-installed options. What's Included 🪞 Mirror Trim Set 1x precision ABS mirror frame surround ⚙️ Fastening Hardware All clips and adhesive backing included Product Highlights Precision-cut ABS construction for durability and longevity Factory-finish appearance matches OEM interior trim lines Direct fit—no cutting, grinding, or panel modification needed Enhances cabin light reflection and perceived interior depth Professional installation in under 30 minutes Compatible with all XE, XF, XJL, F-Pace & E-Pace models listed Lightweight design—zero impact on vehicle dynamics or electronics Resists fading, UV exposure, and interior temperature swings Affordable cabin upgrade without dealer labour costs Pairs seamlessly with other Jaguar interior trim enhancements Compatibility Model / Variant Fit Status Jaguar E-Pace Direct Fit Jaguar XE (All Years) Direct Fit Jaguar XF (All Years) Direct Fit Jaguar XJL (All Years) Direct Fit Jaguar F-Pace (All Years) Direct Fit Jaguar X761 Direct Fit Installation Difficulty: Beginner · Time: 20–30 mins Prepare the mirror. Remove any existing trim or adhesive around the mirror frame using a trim removal tool or soft plastic pry bar. Clean the surface. Wipe the mirror surround with a microfibre cloth and isopropyl alcohol. Allow 2–3 minutes for complete drying. Position the trim. Carefully align the new ABS trim with the mirror frame, starting from one edge and working across. Secure the trim. Press firmly around the entire perimeter to activate the adhesive backing. Hold pressure for 10 seconds at stress points (corners and joints). Verify the fit. Step back and check alignment. The trim should sit flush with no visible gaps or lifting at edges. Allow curing. Leave the vehicle interior undisturbed for 24 hours to allow adhesive to set completely. Note: If your vehicle's climate control is set to high heat, postpone installation to cooler hours. Cold adhesive sets faster and bonds more securely. Ready to Refine Your Interior? This mirror trim is a quick, affordable way to add perceived craftsmanship to your Jaguar cabin. Order today and see why thousands of owners trust Victorious for quality interior upgrades. Shop Mirror Trim Now Use code 22GET20 for 20% off any 2 items ✓ 30-day Money-Back Guarantee ✓ 4.9/5 Stars • 12,300+ Reviews ✓ Worldwide DHL/FedEx Shipping 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessory supplier and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Jaguar Cars Limited, or any official Jaguar brand entity. All vehicle names and designations remain the property of their respective manufacturers. This product is designed for aftermarket fitment only. ```

Victorious Automotive · Range Rover Sport L494 · Mirror Accessories Range Rover Sport 2013–2020 Chrome Mirror Trim Surround A precision-fitted chrome mirror surround that elevates the exterior detailing of your L494 Range Rover Sport with a polished, factory-adjacent finish. Range Rover Sport L494 2013–2020 High-Quality TPU Chrome Finish Peel & Stick No Drilling Required Exterior Trim Mirror Surround Overview The Range Rover Sport L494 — produced from 2013 through 2020 — is a vehicle that commands presence by design. Its sculpted body lines, assertive stance, and premium exterior detailing set it apart from the moment it arrives. For owners who take that exterior seriously, every surface matters — including the door mirrors, which sit prominently at eye level and contribute significantly to the vehicle's overall visual character. This Chrome Mirror Trim Surround is engineered specifically for the L494 Range Rover Sport. Manufactured from high-quality TPU with a lustrous chrome finish, it wraps cleanly around the mirror housing to introduce a refined, upscale accent that complements both standard and upgraded exterior specifications. The result is a subtle but unmistakable transformation — the kind that catches the eye without shouting for attention. Installation requires no specialist tools, no drilling, and no professional fitting time. The adhesive-backed design means this is a genuine weekend upgrade — clean the surface, align carefully, press firmly, and the surround bonds flush and secure. It's the detail-focused upgrade that Range Rover Sport owners appreciate precisely because it looks like it should have come that way from the factory. What's Included 🪞 Chrome Mirror Surround One piece, pre-shaped for L494 mirror housing 🔧 Pre-Applied Adhesive 3M-grade adhesive backing included 📋 Installation Guide Step-by-step fitting instructions 🧹 Cleaning Prep Wipe Surface prep cloth for optimal adhesion Product Highlights Precision-moulded to fit the L494 Range Rover Sport mirror housing profile exactly High-gloss chrome finish delivers a premium, factory-quality aesthetic Constructed from durable TPU — flexible, impact-resistant, and long-lasting Peel-and-stick installation requires no tools, drilling, or professional fitting 3M-grade adhesive backing ensures a firm, weather-resistant bond UV-stable finish resists fading, oxidation, and discolouration over time Enhances the exterior detailing of both standard and upgraded Sport variants Low-profile design sits flush with the mirror housing — no gaps or proud edges Removable without damage to paintwork when surface prep guidelines are followed Compatible with all L494 trim levels including SE, HSE, HSE Dynamic, and SVR-adjacent body styles Compatibility Vehicle Code Years Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean the mirror housing surface using the included prep wipe. Remove all traces of wax, dirt, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit the chrome mirror surround against the housing to confirm alignment and positioning. Take note of the correct orientation before applying adhesive. Carefully peel back the adhesive liner from the surround, exposing the adhesive surface. Avoid touching the adhesive with bare fingers. Starting from one edge, align the surround precisely with the mirror housing profile and press firmly into position. Work progressively across the piece to eliminate air pockets. Apply firm, sustained pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Pay particular attention to corners and edges. Allow a minimum of 2 hours before exposing to water or moisture. Full adhesive cure is achieved after 24 hours. ⚠ Important: Installation in temperatures below 10°C (50°F) may reduce adhesive performance. For best results, install indoors or in a garage environment. Always verify vehicle compatibility before fitting. Upgrade Your Sport's Detail Shop the full Range Rover Sport L494 accessories collection at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Buy any two items and save 20% with the code below. Shop Range Rover Sport L494 → Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and designations referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Premium Tesla Accessories Wireless Car Charger for Tesla Model 3 Fast, hands-free 10W wireless charging seamlessly integrated into your Model 3 centre console. Model 3 2017–2024 Wireless Charging 10W Dual Mode Stainless Steel Overview The Tesla Model 3 is engineered for precision and efficiency, and your interior deserves accessories that match that standard. This Wireless Car Charger integrates seamlessly into your centre console, delivering professional-grade charging without the clutter of cables or the distraction of hand-held mounting. With 10W dual-mode output, intelligent Foreign Object Detection, and automatic temperature management, this charger keeps your smartphone powered throughout your journey. The stainless steel core with premium thermoplastic silicone coating ensures durability and a refined aesthetic that complements Model 3 interiors perfectly. Whether you're commuting or road-tripping, this charger delivers reliable, fast power to any compatible Qi-enabled device—freeing your attention for the road ahead. What's Included ⚡ Wireless Phone Charger 10W dual-mode unit with FOD & temperature control 📍 Mounting Tape Pre-cut adhesive for secure centre console installation 🔌 USB Separators (×2) Organise cable management and routing 📖 User Manual Installation, troubleshooting, and safety guidelines Product Highlights 10W wireless dual-mode output for rapid, versatile charging Intelligent Foreign Object Detection (FOD) safeguards your device Real-time LED charging status indicator Automatic thermal management prevents overheating Stainless steel core for durability and premium finish Thermoplastic silicone rubber coating ensures enhanced stability Perfect fit for Model 3 centre console cavity Hands-free operation for safer driving Compatible with all Qi-enabled smartphones No metallic objects or interference required Compatibility & Fitment Model Year Range Fitment Tesla Model 3 2017–2024 Direct Fit Tesla Model 3 Performance 2017–2024 Direct Fit Tesla Model Y 2020–2024 Not Compatible Tesla Model S 2015–2024 Not Compatible Installation Guide Installation Overview Difficulty: Easy | Time Required: 10–15 minutes | Tools: None (tape mounting) Power off your Tesla and open the centre console lid carefully. Clean the console surface with a dry, lint-free cloth to ensure tape adhesion. Remove the backing from the pre-cut mounting tape. Align the Wireless Car Charger with the console cavity and press firmly for 30 seconds. Route the USB cable through the console to your 12V or USB power source. Use the included USB separators to organise cable runs neatly. Allow the adhesive to set for 2 hours before placing devices on the charger. Place your Qi-enabled phone on the charger—the LED will confirm charging status. Important: Do not place metallic objects (keys, coins, metal phone cases) on the charging pad during use. This may trigger Foreign Object Detection and interrupt charging. Ensure the charger is installed on a clean, dry surface for optimal adhesion. Specification Sheet Specification Detail Output Power 10W per charging side (20W total) Charging Modes Dual-mode wireless fast charging Core Material Stainless steel Surface Coating Thermoplastic silicone rubber Foreign Object Detection Yes (FOD intelligent protection) Temperature Control Automatic thermal management Status Indicator LED charging status light Vehicle Fit Tesla Model 3 centre console (2017–2024) Device Compatibility All Qi-enabled smartphones Installation Tape-mount (no drilling required) Complete Your Model 3 Interior Keep your phone charged, your hands free, and your attention on the road. Designed for Tesla owners who demand clean lines and seamless integration. Shop Wireless Charger Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ verified reviews 🛡️ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS 📞 UK Support +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla Inc., Elon Musk, or any Tesla subsidiary. Tesla and Model 3 are registered trademarks of Tesla Inc. All references are for fitment and compatibility purposes only. Product images and descriptions are property of Victorious Automotive. Always verify fitment with your vehicle's year, trim, and region before purchase.

Automotive · Tesla · Interior Organizers Headrest Hook Hanger Holder for Tesla Model 3 & Model X Premium aluminum headrest hooks engineered for seamless Tesla interior organization and cargo accessibility. Model 3 Model X 2017–2026 Aluminum Tool-Free Install Overview Tesla Model 3 and Model X owners understand the importance of maximizing interior space and maintaining a clean, organized cabin. Whether you're managing shopping bags, jackets, or daily essentials, your vehicle's headrest area remains one of the most underutilized storage opportunities. These precision-engineered aluminum headrest hooks deliver a robust yet elegant solution for hanging items securely without compromising your Tesla's premium aesthetic. Constructed from aircraft-grade aluminum with a refined black finish, they integrate seamlessly into both the Model 3's minimalist interior and the Model X's spacious cabin layout. Installation requires no tools or modifications—simply position and secure. The hooks support moderate loads while maintaining structural integrity, making them ideal for work clothes, shopping bags, or keeping backseat items within arm's reach during longer journeys. What's Included 🪝 Dual Headrest Hooks Premium aluminum, black finish ⚡ Tool-Free Installation No drilling or fasteners required ✓ Fitment Verified Tested for Model 3 & Model X Product Highlights Aircraft-grade aluminum construction resists corrosion and wear Precision-engineered for exact Tesla headrest compatibility Sleek black anodized finish complements modern interiors Tool-free installation—no modifications to vehicle required Supports moderate cargo loads securely Compact, unobtrusive design maintains cabin aesthetics Reversible mounting suitable for driver and passenger seats Durable finish resists fingerprints and weathering Quick removal if needed for deep cleaning Tested for durability across multiple drive cycles Compatibility Vehicle Model Year Range Fitment Tesla Model 3 (Standard, Long Range, Performance) 2017–2026 Direct Fit Tesla Model X (Standard, Long Range, Plaid) 2017–2026 Direct Fit Tesla Model S All Years Not Compatible Tesla Model Y All Years Not Compatible Installation Installation Difficulty: Easy | Time Required: 5 minutes Locate the headrest mounting points on the front seat backs (driver and passenger) Align hook bracket with existing headrest attachment points Press firmly until hook is fully seated and secured Gently tug to confirm stability before loading cargo Repeat for second headrest hook if installing both Weight Capacity: Each hook is rated for moderate loads (approximately 5–8 lbs). Avoid exceeding recommended weight to preserve headrest integrity and prevent damage to mounting points. Elevate Your Tesla's Interior Organization Transform underutilized headrest space into functional storage with premium aluminum hooks engineered for Tesla Model 3 and Model X owners who demand both form and function. Shop Headrest Hooks Apply code 22GET20 for 20% off any 2 items 4.9/5 stars – 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 – Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Tesla, Inc. or its subsidiaries. Tesla and Model 3/X are registered trademarks of Tesla, Inc. Product specifications and compatibility are verified independently and subject to change without notice. Always verify fitment with your specific vehicle before purchase.

Tesla · Model 3 · Interior Expander Black Water Cup Organizer Holder Adapter for Tesla Model 3 Secure your beverages and maximize your Model 3's cup holder functionality with premium-grade expandable design. Model 3 2017–2024 Premium Plastic Interior Organizer Expandable Design Overview Tesla Model 3 owners know that interior organization separates a well-ordered cabin from a cluttered one. The Expander Black Water Cup Organizer Holder Adapter transforms your Model 3's standard cup holders into versatile, secure beverage storage that accommodates everything from standard cans to oversized bottles. No drilling, no permanent modifications—just ingenious expandable design that works seamlessly with your vehicle's existing architecture. This adapter combines smart engineering with simplicity. The expanding mechanism grips your containers with equal pressure around the perimeter, eliminating the wobble and spillage risk that plague traditional cup holders. Whether you're commuting through city streets or tackling a road trip, your drinks stay exactly where you put them. Built from premium-quality, durable plastic, this organizer resists warping and maintains its grip over thousands of cycles. It's the detail that separates daily frustration from peace of mind—the kind of refinement that Model 3 enthusiasts expect from their interior accessories. What's Included 📦 Cup Holder Adapter 1 or 2 units (based on pack selection) 🎯 Universal Fit Design Expandable to fit standard cans and bottles ⚙️ Tool-Free Installation Pop in and go—no modifications required 🛡️ Durable Construction Premium plastic engineered for longevity Product Highlights Expandable design fits standard cans and oversized bottles Prevents beverage spillage and movement while driving Premium-quality plastic resists warping and degradation Pop-in installation—zero tools or drilling needed Sleek black finish complements Model 3 minimalist interior Available in single or dual-pack options Lightweight and non-intrusive design Works with all standard beverages and hydration bottles Long-lasting grip mechanism rated for thousands of cycles Maintains factory aesthetics while improving functionality Compatibility Tesla Model 3 Variant Cup Holder Fit Status Model 3 Standard Range (2017–2024) Front Center Console Direct Fit Model 3 Long Range (2017–2024) Front Center Console Direct Fit Model 3 Performance (2017–2024) Front Center Console Direct Fit Model 3 Door Panel Cubbies Side Compartments Direct Fit Note: Verify your cup holder dimensions before purchase. While this adapter fits standard Model 3 holders, measuring your existing cavity ensures optimal performance. Installation Notes Tool-Free Installation – 2 Minutes Locate your cup holder: Front center console or door panel cubby on your Model 3. Expand the adapter: Gently pull apart the expander to match your cup holder's width and depth. Insert into position: Carefully place the expanded adapter into the cup holder cavity. Secure in place: Release the expander slightly until it grips firmly without forcing or damaging your trim. Test fit: Place a beverage inside to confirm stability and alignment. Caution: Do not over-expand or force the adapter into undersized cavities. If resistance is felt, reduce expansion slightly. Forcing may damage your cup holder trim. Why Owners Choose This Adapter Model 3 owners appreciate simplicity, efficiency, and thoughtful design. Standard cup holders often fail to secure beverages during cornering or braking, leading to spills that distract from your drive. This adapter eliminates that compromise entirely. The expandable mechanism distributes pressure evenly, gripping containers of different sizes with equal reliability. Unlike rigid inserts that only fit specific bottle diameters, this organizer adapts to your actual beverage choices—cans, bottles, travel mugs. It's the kind of accessory that proves its worth every single day, turning a recurring minor frustration into a non-issue. Ready to Upgrade Your Model 3? Secure your drinks, organize your cabin, and drive with confidence. This cup holder adapter is a small change that delivers measurable peace of mind on every journey. Add to Cart Use code 22GET20 for 20% off when you purchase 2 items ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping (DHL, FedEx, UPS, TNT) ✓ 4.9/5 from 12,300+ Reviews ☎ +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with Tesla, Inc. or any official Tesla subsidiary. Tesla and Model 3 are registered trademarks of Tesla, Inc. All product compatibility information is provided for reference only; purchasers should verify fitment with vehicle specifications before ordering. This product does not modify vehicle performance or safety systems.

Victorious · Range Rover Velar · Exterior Styling Carbon Fiber Door Handle Covers – Range Rover Velar 2017–2018 Upgrade to SVR-inspired carbon fiber door handles in minutes—laser-cut precision, premium TPU, perfect fit every time. L560 Velar 2017–2018 Carbon Fiber 4-Piece Set Clip-On Install Overview Your Range Rover Velar deserves to look as premium as it drives. These carbon fiber door handle covers transform the exterior in seconds, delivering the aggressive, modern aesthetic of the top-tier SVR models without the price tag. Perfect for owners who want individual styling that commands attention on the road. Each set comprises four precision-laser-cut covers engineered to clip seamlessly over your factory handles. We've engineered them from high-quality carbon fiber TPU—a material that balances authentic visual impact with durability and longevity. The adhesion is exceptional; once fitted, they stay exactly where they belong. Installation takes minutes. No drilling, no permanent modifications, no dealer visit required. If you ever want to revert to stock, simply remove them. It's the fastest way to personalize your Velar's exterior. What's Included 🎨 4× Carbon Fiber Covers Front and rear door handle set ✓ Pre-Cut & Ready to Fit Laser-aligned for perfect fitment 📋 Installation Guide Step-by-step instructions included 🛡️ Quality Assurance 30-day money-back guarantee Product Highlights Authentic carbon fiber TPU material with premium finish Laser-cut precision for flawless alignment on all four doors SVR-inspired aesthetic—aggressive, modern, purposeful Clip-on design—zero modifications to factory handles Exceptional adhesion—stays secure in all weather conditions Simple 5-minute installation—no tools, no expertise required Reversible upgrade—remove anytime without residue Lightweight construction—no impact on vehicle dynamics UV-resistant finish maintains color and depth long-term Direct fit for 2017–2018 Range Rover Velar models Compatibility Vehicle Model Year Range Compatibility Range Rover Velar L560 2017–2018 Direct Fit Range Rover Velar L560 2019–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty Level: Beginner | Time Required: 5–10 minutes Clean your factory door handles thoroughly with mild soap and water. Dry completely. Carefully position the first carbon fiber cover over the front-left door handle, ensuring alignment with handle edges. Apply firm, even pressure across the entire cover surface to activate adhesion. Hold for 10 seconds. Repeat steps 2–3 for the remaining three handles (front-right, rear-left, rear-right). Allow adhesive to cure for 24 hours before opening doors or exposing to moisture. Pro Tip: Warm the adhesive slightly (blow dryer on low heat, 30 seconds) to enhance bonding on cold days. Do not force installation—if a cover doesn't sit flush, remove and reposition. Upgrade Your Velar Today Premium carbon fiber styling shouldn't require a dealer visit or a premium price. These handles prove it. SVR-level aesthetics, genuine materials, and install-it-yourself simplicity. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names and trademarks belong to their respective rights holders.

Victorious Automotive · Range Rover Velar · Interior Trim Carbon Fiber Dashboard Trim for Range Rover Velar 2017–2020 Genuine carbon fiber aesthetic upgrade that elevates your Velar's interior with a premium motorsport finish. Velar 2017-2020 Carbon Fiber Dashboard Trim ABS Material Adhesive Install ISO9001 Certified Overview The Range Rover Velar represents British design at its finest—clean lines, minimalist interiors, and a focus on refinement. This carbon fiber dashboard trim builds on that philosophy by introducing a subtle but unmistakably premium touch to your cabin. Manufactured from high-quality ABS composite with an authentic carbon fiber weave finish, this trim piece measures 20cm in length and fits precisely into the Velar's dashboard topography. It's not about making a loud statement; it's about the discerning driver who appreciates quality details. The material is durable, UV-resistant, and will maintain its appearance through years of use. Installation is straightforward: backed with premium automotive adhesive tape, no drilling or fasteners required. Once in place, it transforms your dashboard from standard to bespoke in seconds—exactly what Velar owners expect. What's Included 📦 Carbon Fiber Dashboard Trim 20cm × 8cm trim piece with carbon weave 🔖 Pre-applied Adhesive Backing Premium automotive-grade tape, ready to install 📋 Installation Guide Simple step-by-step instructions included ✓ ISO9001 Certification Manufactured to international quality standards Product Highlights Authentic carbon fiber weave design—not a printed graphic Lightweight ABS construction—only 40g, zero impact on weight distribution Perfect fit for Velar 2017, 2018, 2019, and 2020 model years UV-resistant finish maintains appearance in direct sunlight Pre-applied automotive adhesive—no additional tape or fasteners needed Measures 20cm × 8cm × 3cm—designed for dashboard contours Removable without damage to original trim (adhesive tape cleans off cleanly) Certified to ISO9001 manufacturing standards Complements both black and light cabin interiors OEM-grade finishing—professional appearance, premium feel Compatibility Model & Year Compatibility Range Rover Velar 2017 Direct Fit Range Rover Velar 2018 Direct Fit Range Rover Velar 2019 Direct Fit Range Rover Velar 2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Sport (All) Not Compatible Range Rover Evoque (All) Not Compatible Installation Difficulty Level: Beginner | Time Required: 5–10 minutes Prepare the surface: Clean your dashboard trim area with a microfiber cloth and isopropyl alcohol. Allow to dry completely. Position the trim: Carefully align the carbon fiber trim piece on your dashboard. Use the existing dashboard lines as a visual guide. Apply pressure: Once positioned, press firmly along the entire length for 10–15 seconds to activate the adhesive bond. Allow cure time: Wait 24 hours before exposing the trim to heat, direct sunlight, or heavy vibration for maximum adhesion strength. Inspect: Check all edges for secure contact. If any edge lifts, gently peel back and reapply pressure. Note: This trim is designed for interior use only. Ensure dashboard surface is clean and free of dust or residue for best adhesion. Do not install in temperatures below 10°C or above 35°C. Ready to Elevate Your Velar's Interior? Premium carbon fiber trim is a signature touch of refinement. Add this to your Velar and experience the difference attention to detail makes. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket supplier. This product is not manufactured, endorsed, or affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover entity. All vehicle names, logos, and model designations are the property of their respective manufacturers and are used for identification purposes only.

Victorious · Mini · Interior Protection Carbon Fibre Door Panel Protection for Mini Premium protective styling that safeguards your Mini's door panels from daily wear while elevating interior aesthetics. Mini All Models Carbon Fibre Door Protection Set of 2 or 4 Overview Your Mini deserves interior details that match its personality. Door panels take a beating—from door edge impacts to scuffs from everyday use. This carbon fibre protection addresses that vulnerability while adding a genuine upgrade to your cabin. Crafted from advanced composite materials with a premium gloss carbon fibre finish, these protectors deliver scratch resistance and visual depth. The scratch-proof surface maintains its appearance for years, shielding the vulnerable areas where doors meet door jambs and sills—exactly where minor impact damage occurs. Installation is straightforward: clean, dry, position, and press. No drilling, no permanence, full reversibility. Available in sets of two (both doors) or four (all doors plus rear), so you can protect as much as you need. What's Included 📦 Door Panel Protectors Set of 2 or 4 pieces 📋 Installation Guide Step-by-step instructions 🧹 Cleaning Prep Surface prep guidance 🛡️ Long-Term Durability Scratch-resistant coating Product Highlights Premium carbon fibre composite finish for authentic styling Scratch-proof, impact-resistant surface coating Compatible with all Mini model variants Available in 2-piece or 4-piece configurations Glossy, durable gloss finish maintains appearance Non-permanent adhesive backing—fully reversible Professional installation or easy DIY application Protects vulnerable door edge and sill areas Advanced composite materials resist daily wear Elevates cabin aesthetics with premium look Compatibility Mini Model Compatibility Mini Cooper (All Generations) Direct Fit Mini Clubman Direct Fit Mini Countryman Direct Fit Mini Convertible Direct Fit Mini Paceman Direct Fit Mini Roadster Direct Fit Installation Notes Difficulty Level: Easy | Time: 15–20 Minutes Clean door panel and surrounding area thoroughly with soap and water; dry completely. Use isopropyl alcohol on installation surface to remove any residue or oils. Carefully position protector on door panel edge, aligning with existing trim. Press firmly into place, working from centre outward to avoid air bubbles. Allow 24 hours for adhesive to cure fully before opening doors repeatedly. Repeat for additional panels as required (rear doors, etc.). Important: Ensure surface is completely dry and free from dust before application. Poor surface preparation will compromise adhesion. Do not install in temperatures below 10°C. Why Victorious? We've equipped thousands of Mini owners across Europe with premium interior and exterior upgrades. Every product is tested for fitment, durability, and real-world performance. Our 4.9-star rating (12,300+ verified reviews) reflects our commitment to quality and customer care. Ready to Protect Your Mini's Interior? Upgrade your door panels with premium carbon fibre protection. Scratch-resistant, stylish, and built to last. Order today and enjoy worldwide shipping via DHL, FedEx, or UPS. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars – 12,300+ Reviews ✓ Expert Support – +44 203 943 9919 ✓ Worldwide Shipping – Next Business Day Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Mini, BMW Group, or any original equipment manufacturer. All product names and logos are trademarks of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Front Centre Grille Hood Insert for Range Rover Vogue L405 (2014–2017) – Gloss Black Bumper Upgrade A precision-formed ABS grille insert that replaces the factory front bumper centre trim with a sharper, more aggressive aesthetic — engineered to fit your 2014–2017 Range Rover Vogue L405 without modification. Range Rover Vogue L405 2014–2017 ABS Construction Gloss Black Direct Replacement Front Bumper Hood Insert No Drilling Required Exterior Styling Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that rewards considered modifications with a look that genuinely distinguishes itself from the factory standard. The front fascia, in particular, is one area where subtle upgrades deliver outsized visual impact. The centre grille insert sits at the heart of that first impression. This Front Centre Grille Hood Insert is designed specifically for the 2014–2017 Range Rover Vogue L405 facelift generation. Formed from durable ABS thermoplastic and finished in a deep gloss black, it replaces the factory bumper centre surround with a cleaner, more assertive profile. The result is a more cohesive front-end appearance — particularly effective on vehicles already running black pack trim, darkened badges, or upgraded alloy wheels. The fitment is engineered as a direct replacement, meaning no cutting, drilling, or permanent modification to your vehicle. Installation is clean and reversible — making this an ideal first step in a broader exterior styling programme, or simply a standalone refresh for owners looking to modernise the Vogue's front end without straying from its inherent elegance. What's Included 🔲 Front Centre Grille Insert Gloss black ABS — qty 1, pre-formed to OEM profile 📄 Installation Guide Step-by-step fitting instructions included 🔩 Mounting Hardware Clips and fixings for secure, rattle-free attachment Product Highlights Designed exclusively for Range Rover Vogue L405 (2014–2017) — no universal fitment compromises Deep gloss black ABS finish complements black pack, dark chrome, and stealth styling packages Direct OEM-replacement fit — installs into existing mounting points without modification Lightweight yet rigid ABS thermoplastic construction withstands road vibration and weather exposure Enhances the front fascia with a more purposeful, contemporary aesthetic Fully reversible installation — original grille can be refitted at any time No specialist tools or workshop equipment required for fitting UV-stabilised finish resists fading and surface degradation over time Pairs naturally with gloss black badge overlays, window tint, and black alloy upgrades Clean, factory-level finish from the front — no visible fixings or gaps when installed correctly Compatibility Vehicle Code Year Range Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Vogue L405 2013 (pre-facelift) Verify Before Order Range Rover Vogue L405 2018–2021 (facelift) Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Park the vehicle on a flat surface with the engine off and fully cooled. Ensure you have adequate lighting and clear access to the front bumper. Carefully locate and remove the factory front bumper centre grille insert by releasing the OEM retaining clips — use a trim removal tool to avoid scratching surrounding surfaces. Fully remove the original insert and set aside. Clean the mounting area with a damp cloth and allow to dry before fitting the new grille. Align the new gloss black grille insert into the bumper aperture, ensuring all mounting tabs are correctly seated in their corresponding clip positions. Apply firm, even pressure across the grille face to engage all retaining clips until you hear or feel them click into place. Check for any gaps or flex along the perimeter. Step back and inspect the fitment from multiple angles under good light before considering the installation complete. No adhesive is required. ⚠ Please Note: Confirm your exact model year and bumper variant before purchasing. The 2013 pre-facelift L405 uses a slightly different front bumper profile that may not accept this insert without modification. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Vogue's Front End Thousands of Range Rover owners trust Victorious Automotive for exterior upgrades that look factory-correct and fit without compromise. Browse our full Range Rover Vogue L405 collection for complementary styling pieces — or call our specialists if you need guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment and compatibility purposes. All trademarks remain the property of their respective owners.