Best selling products

Victorious Automotive · Range Rover Evoque · Interior Lighting Range Rover Evoque Additional Ambient Lighting Upgrade — Fiber Optic LED Interior Strip Kit Transform your Evoque's cabin atmosphere with a premium fiber optic LED band lighting system — delivering crisp, cool-white illumination along door panels and interior trim with a clean, factory-flush finish. Range Rover Evoque L538 Range Rover Evoque L551 Fiber Optic LED Interior Ambient Light 12000K Cool White 4W Low Draw Cree LED Chip Plug & Fit Door Panel Lighting 2400lm Output Overview The Range Rover Evoque occupies a unique space in the Land Rover lineup — compact enough for urban life, yet premium enough to demand a cabin that feels genuinely considered at every hour of the day. Whether you own the first-generation L538 or the refined L551, the factory ambient lighting spec often leaves enthusiasts wanting more depth, more presence, and more atmosphere once the sun goes down. This fiber optic LED ambient lighting kit is purpose-built to address exactly that. Using genuine Cree LED chip technology and a flexible fiber optic band format, the system layers soft, continuous illumination along your door panels and interior trim lines — creating a seamless glow that integrates naturally with the Evoque's interior architecture rather than looking like an afterthought. At 12000K colour temperature, the output reads as a clean, crisp cool white that complements the Evoque's contemporary design language without overpowering it. Each of the four included strips ships at one metre in length and carries its own dedicated light source, giving you independent control over placement and intensity across all four door panels. The result is a balanced, symmetrical lighting upgrade that elevates the Evoque cabin to a level that genuinely rivals far more expensive factory options — installed without the need for professional fitting or wiring specialists. What's Included 💡 Fiber Optic LED Strips × 4 1 metre each, individual light source per strip 🔌 Light Source Units × 4 Cree LED chip, 4W, 12000K per unit 📄 Installation Instructions Step-by-step printed fitting guide 🔧 Mounting Adhesive Pre-applied strip backing for clean fitment Product Highlights Genuine Cree LED chip technology for consistent, long-life output 12000K cool white colour temperature — sharp, premium cabin feel 2400 lumens total output across four strips Fiber optic band format for seamless, even illumination with no hotspots 4W total draw — negligible impact on vehicle battery and electrics Each strip ships at 1 metre — ideal for full door panel coverage Independent light source per strip for flexible installation routing Not EL (electroluminescent) wire — true LED fiber optic performance Lightweight 0.5kg kit — no structural modification required Compatible across multiple Range Rover and Land Rover variants Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–Present Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Classic MK1 1970–1996 Direct Fit Range Rover P38A MK2 1994–2002 Direct Fit Range Rover L322 MK3 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L461 2022–Present Verify Before Order Range Rover Vogue L460 2022–Present Verify Before Order Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 60–90 minutes  ·  No professional fitting required Gently remove door panel trim inserts or lower sill trim pieces to expose the routing channel. No permanent removal is necessary — light prying with a trim tool is sufficient on most Evoque variants. Clean the mounting surface thoroughly with an isopropyl alcohol wipe and allow to dry completely before applying the adhesive-backed fiber optic strips. This ensures a lasting bond. Route each fiber optic strip along the desired panel line — typically along the lower door card edge or accent trim groove — following the natural contour of the interior surface. Connect each strip's light source unit to a switched 12V feed, such as the courtesy light circuit or an existing interior lighting circuit, so the ambient lights activate with the cabin lighting. Tuck all wiring neatly behind trim panels using the existing cable routing channels and refit all trim pieces. Test each strip individually before final reassembly. Power on and verify uniform illumination across all four strips. Minor positional adjustments can be made within the first few minutes before the adhesive fully cures. ⚠ Note: Always disconnect the vehicle's negative battery terminal before working with interior wiring circuits. If you are unfamiliar with automotive electrics, we recommend having the wiring connection completed by a qualified auto electrician. The fiber optic strips themselves require no electrical connection and can be positioned independently of the light source units. Elevate Your Evoque Interior Browse the full collection of Range Rover Evoque interior upgrades at Victorious Automotive — curated specifically for owners who expect more from their cabin. Shop Evoque Accessories Shop Evoque L551 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes. Always verify fitment with your specific vehicle's VIN and build specification before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Real Carbon Fiber Cup Holder Coaster – Range Rover Evoque L551 Premium 3D carbon fiber coaster that adds depth and sophistication to your Evoque's interior while protecting your surfaces. L551 2019–2020 Real Carbon Fiber 3D Design Interior Trim Overview The Range Rover Evoque L551 (2019–2020) represents a pinnacle of modern compact luxury. Its refined interior demands accessories that match both its aesthetic and engineering standard. This Real Carbon Fiber Cup Holder Coaster does exactly that. Crafted from authentic 3D carbon fiber vinyl, this coaster integrates seamlessly into your Evoque's cupholders and storage zones. It's not merely decorative—it protects your vehicle's surfaces from moisture and scratches while elevating the tactile experience every time you interact with your interior. Installation takes minutes with automotive-grade adhesive tape. Once fitted, the depth and weave of the carbon fiber catches light beautifully, signaling the kind of attention to detail that separates true enthusiasts from casual owners. What's Included 📦 1 × Carbon Fiber Coaster Ready to install, pre-cut for L551 🧴 Adhesive Tape Included Automotive-grade, residue-free removal Product Highlights Real 3D carbon fiber vinyl—authentic weave pattern and depth Custom-engineered for Range Rover Evoque L551 (2019–2020) Seamless fit with factory cupholder dimensions Protects interior surfaces from spills, scratches, and UV fading Lightweight yet durable construction Premium aesthetic that complements Evoque's modern design language Non-invasive installation using automotive adhesive tape No drilling, cutting, or permanent modification required Easy cleaning with soft cloth and water 30-day money-back guarantee on all Victorious products Compatibility Model Year Compatibility Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2021+ Not Compatible Installation Difficulty: Easy | Time: 5–10 Minutes Clean the interior of your cupholder or storage tray thoroughly with a dry microfiber cloth. Remove any dust, debris, or residue. Ensure the surface is completely dry before proceeding. Wait 2–3 minutes if necessary. Peel back one corner of the adhesive tape backing and carefully position the coaster in your cupholder. Once aligned, press down firmly across the entire surface for 10–15 seconds to secure adhesion. Remove the protective film if present, and allow 24 hours for the adhesive to fully cure before placing items on the coaster. For additional durability, you may apply light pressure to the edges every few hours during the first day. Important: This product is not pre-installed. Ensure your vehicle's cupholder is clean and dry before application. The adhesive is permanent once fully cured—placement should be deliberate and precise. Store in a cool, dry environment before installation. Upgrade Your Evoque's Interior Today Small details define luxury. This carbon fiber coaster transforms your daily interaction with your Range Rover Evoque, adding texture, protection, and visual depth in one understated piece. Shop Range Rover Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 🛡️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover entity. All vehicle names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for fitment and compatibility only.

Premium Accessories · Mini Cooper · Mirror Covers Union Jack Rearview Mirror Cover for Mini Cooper Iconic British styling meets premium protection—add character to your Mini with flagship Union Jack designs and durable TPU construction. Mini Cooper R55 / R56 / R60 / R61 High-Grade TPU 3 Design Options Pre-Applied Adhesive Overview Mini Cooper owners understand the value of bold, individualistic styling. These Union Jack rearview mirror covers deliver authentic British character while protecting your mirrors from road debris, scratches, and UV damage. Engineered from premium TPU material, they combine form with lasting durability. Each cover features pre-applied adhesive tape for tool-free installation—no drilling, no permanent modifications. Available in three distinctive designs, these covers work seamlessly across Mini R55, R56, R60, and R61 models, fitting the standard 5.9×3.5-inch mirror format. Whether you're upgrading your Mini's visual presence or safeguarding your mirrors during extended ownership, these covers deliver both aesthetic impact and practical protection in a single upgrade. What's Included 🛡️ Mirror Cover Set One pre-cut cover per order 🔗 Pre-Applied Adhesive Ready to install—no additional tape needed 📐 Perfect Fit Dimensions 5.9 × 3.5 inches—engineered for precision ✨ Design Selection Choose from three iconic Union Jack styles Product Highlights Authentic Union Jack designs celebrate Mini's British heritage Premium TPU material resists UV fading and weathering Scratch and impact protection for mirror glass and frames Pre-applied adhesive tape—installation takes under 2 minutes No drilling, cutting, or permanent modifications required Seamless fit for R55, R56, R60, and R61 models Easy removal without residue or damage to mirrors Three distinct design options to match your style Lightweight and durable—maintains original mirror function Affordable way to refresh your Mini's visual identity Compatibility Mini Model Generation Years Compatibility Mini Cooper Clubman R55 2007–2015 Direct Fit Mini Cooper R56 2006–2014 Direct Fit Mini Countryman R60 2010–2017 Direct Fit Mini Countryman R61 2017–Present Direct Fit All Other Mini Models — — Not Compatible Installation Guide Installation Difficulty: Easy | Time Required: 2–3 Minutes Clean your mirrors: Wipe both mirror caps thoroughly with a dry, lint-free cloth. Remove any dirt, dust, or residue for optimal adhesion. Position the cover: Carefully align the Union Jack cover with your mirror cap, ensuring even spacing on all sides. Press firmly: Apply steady pressure across the entire cover surface for 30 seconds to activate the pre-applied adhesive. Allow curing: Wait 2 hours before exposing mirrors to water or direct sunlight to ensure full bond strength. Verify fit: Check all edges are secure and free from bubbles or creases. Note: Clean mirrors thoroughly before installation. Adhesion depends on a dust-free surface. If removal is needed, gently peel back the cover and clean any remaining residue with warm water and mild soap. Ready to Add British Character to Your Mini? Upgrade your rearview mirrors with iconic Union Jack styling. Premium TPU construction, pre-applied adhesive, and three design options make this the easiest way to refresh your Mini's appearance. Shop Now Use code 22GET20 for 20% off when you purchase any 2 items ⭐ 4.9/5 Stars – 12,300+ verified reviews ✓ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT 📞 UK Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mini Cooper, BMW, or any official manufacturer. All product names and trademarks are the property of their respective owners. This product is designed for enthusiast customization and does not void manufacturer warranties when installed correctly.

Mini · R56 / F56 · Interior Comfort Mini Cooper Seat Belt Covers – Premium PU Leather Padding for R56, F56, F55, R60, F60, F54, R55 Add signature Mini style and comfort to your cabin with iconic design seat belt padding that protects and elevates every journey. R56 / F56 F55 / R55 Countryman R60 / F60 F54 Clubman PU Leather Union Jack Tool-Free Install Overview If you drive a Mini Cooper—whether you're piloting an R56, F56, F55 Hatchback, Countryman R60, F60, Clubman F54, or R55—you know that every detail matters. Your interior should reflect the bold personality and heritage of your car. These premium PU leather seat belt covers bring authentic Mini styling into your cabin while delivering the comfort your shoulders deserve on every drive. Engineered from high-quality PU leather in three iconic finishes—Red Union Jack, classic Checker, and Grey Union Jack—these covers slip on effortlessly without tools or modification. They transform the functional into the personal, adding texture, warmth, and that unmistakable Mini flair that makes you smile every time you buckle up. Perfect for enthusiasts who understand that the best upgrades are the ones you notice and use every single day. Two covers per set means both front seat belt paths are covered. Installation takes minutes. Impact on your driving experience is immediate. What's Included 📦 Two Seat Belt Covers Front position padding 🎨 Three Design Options Red Union Jack, Checker, Grey Union Jack ✨ Premium PU Leather Durable, comfortable, authentic finish ⚡ Zero-Tool Installation No instructions needed—just slip on Product Highlights Premium PU leather construction for durability and daily comfort Authentic Mini styling in Red Union Jack and Grey Union Jack designs Classic Checker pattern for timeless mini heritage appeal Universal fit across most Mini Cooper generations (R56–F60) Lightweight at just 0.16 kg per set—negligible impact on cabin weight Easy slip-on installation—no tools or professional fitting required Protects original seat belts from wear and sun fading Improves grip and reduces shoulder discomfort on long drives Perfectly complements other Mini interior upgrades and personalisation Pair with discount code 22GET20 for 20% off any 2 items Compatibility Mini Model Generation Year Range Fit Status Mini Cooper Hatchback R56 2006–2014 Direct Fit Mini Cooper Hatchback F56 2014–2019 Direct Fit Mini Cooper Hatchback F55 2014–2023 Direct Fit Mini Countryman R60 2010–2017 Direct Fit Mini Countryman F60 2017–2023 Direct Fit Mini Clubman F54 2015–2023 Direct Fit Mini Cooper R55 2008–2014 Direct Fit Always verify your exact model and year before ordering. If you're unsure, contact us: +44 203 943 9919 (Mon–Fri, 9am–7pm GMT). Installation Difficulty: Easy | Time: 2–3 Minutes Open your vehicle and locate the front seat belt anchor points (driver and passenger side). Gently slide the PU leather cover over the padded section of the seat belt strap. Adjust the cover so it sits evenly and smoothly along the belt path without bunching. Test the seat belt function to ensure smooth operation and proper retraction. Repeat for the passenger side seat belt. Note: These covers are designed for comfort and styling only. They do not alter the structural integrity or safety function of your seat belts. Always ensure belts retract and lock properly after installation. If you notice any resistance or malfunction, remove the covers immediately and contact a Mini-certified technician. Ready to Upgrade Your Mini's Interior? Transform your daily drive with premium seat belt padding that combines authentic Mini heritage, real comfort, and zero-fuss installation. These covers are the small touch that makes every journey feel more personal. Shop Seat Belt Covers Now Use code 22GET20 for 20% off when you buy any 2 items 🏆 4.9 / 5 Stars — 12,300+ verified reviews ✈️ Worldwide shipping — DHL, FedEx, UPS, TNT 🔄 30-day money-back guarantee — No questions asked 📞 Expert support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Mini, BMW Group, or Bayerische Motoren Werke AG. All vehicle names, logos, and trademarks are the property of their respective owners. This product is designed for use with the vehicles listed above and is sold as an accessory only. Always verify compatibility with your specific model and year before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Range Rover Door Trim Set — Silver Chrome Interior Decoration for 2018–2019 Models A precision-engineered ABS chrome door trim set that elevates the interior of your 2018–2019 Range Rover with a seamless silver finish and factory-matched fitment. 2018–2019 Models Chromium Styling ABS Material Silver Chrome Finish Door Air Vent Trim No Drilling Required CCC Certified 3kg Overview The Range Rover is one of the most considered vehicles on the road — every surface, every material choice, and every detail speaks to the owner's standards. The interior door panels are no exception. Whether you're stepping into a 2018 or 2019 model, the door trim lines are prominent, tactile, and immediately visible to every occupant in the cabin. This door trim decoration set introduces a polished silver chrome line finish across the side door surfaces, adding a layer of visual refinement that complements the Range Rover's existing design language without overwhelming it. Manufactured from durable ABS with a chromium-style coating, the trim is built to resist everyday wear, UV exposure, and the temperature swings that come with British and international climates alike. Designed specifically for 2018–2019 model year fitment, these trims align precisely with the factory door panel contours and air vent surrounds — no cutting, no modification, and no compromise on the finished result. For owners who want their interior to reflect the same attention to detail as the rest of the vehicle, this trim set is a straightforward and impactful upgrade. What's Included 🪟 Door Trim Set Full set — 1 complete kit for all door panels 📋 Installation Guide Step-by-step fitting instructions included 🔧 Adhesive Backing Pre-applied 3M-grade bonding tape for secure fit 🛡️ Protective Film Surface protection film to prevent transit scratches Product Highlights Precision-engineered for 2018–2019 Range Rover models — direct fit, no modifications needed Polished silver chrome finish adds a premium, bespoke quality to the door interior High-grade ABS construction offers durability against heat, UV, and daily use Designed to align perfectly with factory door air vent surrounds and panel lines Adhesive bonding system ensures a firm, rattle-free installation CCC certified — manufactured to recognised quality and safety standards Lightweight at 3kg — no impact on door operation or mechanism Reversible installation — can be removed cleanly without damaging original trim Compatible with both short and long wheelbase variants (verify before ordering) Immediately transforms the feel of the cabin with minimal effort or cost Compatibility Model Year Range Variant Fitment Range Rover Velar 2018–2019 Standard Wheelbase Direct Fit Range Rover Velar 2018–2019 R-Dynamic Direct Fit Range Rover Vogue L405 2018–2019 Standard Wheelbase Direct Fit Range Rover Vogue L405 2018–2019 Long Wheelbase Direct Fit Range Rover Sport L494 2018–2019 All Trims Direct Fit Range Rover Vogue L460 2022–2026 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: None Clean the target door trim surfaces thoroughly with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesion and a clean bond line. Dry-fit each trim piece to the door panel before committing to adhesion. Confirm alignment with the air vent surrounds and panel contours. Peel back a small section of the protective backing tape on the first trim piece and carefully position it against the door panel, working from one end to the other to avoid air bubbles. Apply firm, even pressure across the full length of each trim piece for at least 30 seconds. Use a soft cloth or trim tool to press into any contoured areas. Repeat for remaining door panels. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain or a car wash. Once all pieces are installed, inspect from multiple angles in natural light to confirm consistent alignment and finish. ⚠ Important: Please confirm your exact wheelbase and trim variant before installation. Applying adhesive trim to an incorrect panel position may affect fitment and removal. Professional installation is recommended if you are unsure of your vehicle's specific door panel configuration. Upgrade Your Range Rover Interior Today Trusted by over 12,300 Land Rover and Range Rover owners worldwide, Victorious Automotive is the go-to specialist for interior and exterior upgrades that match the standard your vehicle was built to. This door trim set ships globally via DHL, FedEx, UPS, and TNT — fully tracked and protected. Shop Range Rover Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Land Rover Discovery Sport · Interior Storage Central Console Multifunction Storage Box & Phone Tray — Land Rover Discovery Sport 2015–2017 A precision-fit interior organiser engineered specifically for the Discovery Sport L550, transforming the central console area into a clean, clutter-free workspace without a single permanent modification. Discovery Sport L550 2015 · 2016 · 2017 Direct Fit No Drilling Required Phone Tray Multifunction Storage Interior Accessory OEM-Style Finish Overview The Land Rover Discovery Sport (L550), launched in 2015, quickly became one of Land Rover's most versatile and best-selling compact SUVs. With its well-resolved interior architecture and family-forward design, the Discovery Sport set a new benchmark for practicality in the premium compact SUV segment. However, like many vehicles of its generation, the central console area was designed before smartphone dependency became the norm — leaving owners to manage phones, cards, coins, and cables in a space that simply wasn't built for the modern daily commute. This Central Console Multifunction Storage Box and Phone Tray is purpose-built for the 2015, 2016, and 2017 Discovery Sport. It slots neatly into the existing console architecture, creating dedicated compartments for your phone, small essentials, and everyday carry items — all without altering the original interior or requiring any tools. The result is an interior that feels considered, organised, and genuinely more functional. Finished to complement the Discovery Sport's factory interior trim, this storage solution maintains the premium feel Land Rover owners expect while adding a level of day-to-day practicality that the original spec simply didn't include. Whether you're managing a school run or a motorway commute, keeping your cabin clutter-free has never been this straightforward. What's Included 📦 Central Console Storage Box Main multifunction organiser unit — fits directly into the console recess 📱 Phone Tray Insert Dedicated slot sized for modern smartphones — keeps your device secure and accessible 🗂️ Multi-Compartment Dividers Integrated sections for cards, coins, keys and small accessories 📋 Fitting Instructions Simple step-by-step guide included for tool-free installation Product Highlights Precision-engineered fit for the Discovery Sport L550 (2015–2017) console recess Dedicated phone tray accommodates modern smartphones in cases Multiple compartments keep everyday carry items neatly separated No drilling, no adhesives — completely reversible installation OEM-complementary finish blends seamlessly with factory interior trim Rigid construction prevents rattles and movement during driving Improves in-cabin organisation without occupying additional space Protects the console surface from scratches caused by loose items Lightweight yet durable — built for daily use over the long term Ideal upgrade for family use, daily commuting or long-distance driving Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015 Direct Fit Land Rover Discovery Sport L550 2016 Direct Fit Land Rover Discovery Sport L550 2017 Direct Fit Land Rover Discovery Sport L550 2018–2024 Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 Not Compatible Land Rover Discovery 4 L319 2009–2016 Not Compatible Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Ensure the vehicle is parked and the central console area is clear of any existing items or debris. Remove any factory inserts or loose liners from the console recess if present — these typically lift free without tools. Orient the storage box unit so the phone tray faces toward the driver's seat, matching the natural reach angle from the driving position. Lower the unit into the console recess, guiding it into position. It should sit flush and snug against the existing console walls without forcing. Press gently on each corner to confirm the unit is seated evenly and there is no movement or rocking. Place your phone in the tray and verify access and clearance — adjust orientation if needed for your specific device size. ⚠ Please Note: Console recess dimensions can vary slightly between production runs and trim levels within the same model year. If you have an aftermarket centre console or a modified interior, please verify the fit dimensions before purchase. If in doubt, contact our team on +44 203 943 9919 before ordering. Upgrade Your Discovery Sport Interior Explore our full range of Discovery Sport accessories — from interior organisers to exterior protection — all curated specifically for Land Rover owners who won't compromise on quality or fit. Shop Discovery Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or officially associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Range Rover Sport (2014–2017) High Gloss Black Interior Trim Set — 8 Pieces A precision-engineered 8-piece ABS interior trim upgrade that delivers a polished, high gloss black finish tailored specifically for the Range Rover Sport L494 facelift generation. Range Rover Sport L494 2014–2017 High Gloss Black ABS Plastic 8-Piece Set Direct Fit Interior Trim No Drilling Required Overview The Range Rover Sport L494, produced between 2014 and 2017, carries a commanding presence both inside and out. Its interior was already a step forward from its predecessor — but for owners who want to push that aesthetic further, the factory trim finish can feel understated. This high gloss black interior trim set is built specifically for that generation, restoring a sense of sharpness and modernity to the cabin without the cost or complexity of an OEM upgrade. Crafted from high-grade ABS plastic, each of the eight pieces is individually moulded to mirror the geometry of your Sport's original trim panels. The deep, mirror-like gloss black finish reflects light cleanly and integrates seamlessly with both lighter and darker interior colour schemes — whether your Sport is finished in Ebony, Ivory, or any of Land Rover's other interior palettes from that era. Unlike generic trim kits, this set is designed with the L494 Sport's specific dash, door and console architecture in mind. Fitment is achieved via pre-applied adhesive backing, removing the need for any drilling, cutting or professional bodywork — making this one of the highest-impact, lowest-effort interior upgrades available for this generation of Sport. What's Included 🎛️ Dashboard Trim Piece Central fascia accent panel 🚗 Centre Console Trim Gloss surround for gear selector area 🚪 Door Panel Trim × 2 Driver and passenger side accents 🎚️ Air Vent Surround Trim Gloss accent ring for centre vents 🖐️ Armrest Trim Piece Centre console armrest accent 🔳 Infotainment Surround Screen bezel accent panel ⚙️ Gear Selector Trim Rotary gear selector surround 📦 Protective Packaging Each piece individually wrapped for safe transit Product Highlights 100% brand new — never fitted, zero compromise on finish quality Deep mirror-like high gloss black surface finish throughout Precision-moulded ABS plastic for exact L494 panel geometry Pre-applied 3M-grade adhesive backing for clean, tool-free installation Full 8-piece set covering key interior focal points in one purchase No drilling, cutting or modification required to your existing trim Reversible installation — original trim remains fully intact beneath Resistant to everyday wear, UV exposure and interior temperature fluctuation Compatible with all trim and interior colour variants of the 2014–2017 Sport Arrives individually packaged to prevent transit damage to the gloss surface Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (pre-facelift) Not Compatible Range Rover Sport L494 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a different generation of Range Rover Sport, browse our full Range Rover Sport L494 collection or our new Range Rover Sport L461 collection for compatible alternatives. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 30–60 Minutes  ·  🛠 Tools Required: None Thoroughly clean each target interior panel with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond strength. Dry-fit each trim piece against its corresponding panel before committing, confirming alignment and coverage against the existing trim geometry. Starting from the centre of the cabin, peel the protective backing from the adhesive layer and position carefully — trim pieces are not repositionable once contact is made. Apply firm, even pressure across the entire surface of each piece for 30–60 seconds to activate the adhesive bond fully. Work outward from the centre console toward the door panels, completing one piece at a time to maintain consistency. Allow a minimum of 12 hours before exposing the freshly installed trim to heat sources or direct sunlight — this allows the adhesive to fully cure. ⚠ Note: Ensure all panels are free of dust, grease and moisture prior to installation. Applying trim to a warm surface (e.g. a cabin warmed by sunlight) can slightly improve adhesion in cooler climates. If you are unsure about any step, professional installation is always recommended for the best long-term result. Upgrade Your Sport's Interior Today Trusted by over 12,300 Range Rover and Land Rover owners worldwide, Victorious Automotive delivers precision-engineered accessories backed by a 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS and TNT. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are the property of their respective owners and are used for fitment reference purposes only.

Victorious Automotive · Land Rover Discovery 5 · Front Grille Front Middle Abs Grille — Land Rover Discovery 5 (2017–2018) A precision-moulded ABS front centre grille panel designed specifically for the Discovery 5, delivering a refreshed, purposeful look with no compromises to fitment or finish. Discovery 5 L462 2017–2018 ABS Material Direct Fit Front Centre Grille CCC Certified SVSPS No Cutting Required Overview The Land Rover Discovery 5 occupies a unique space in the LR lineup — it's the vehicle that blends genuine family versatility with serious off-road credibility. Launched with a bold, contemporary face, the Discovery 5 rewards owners who take an interest in its presentation. The front grille is one of the most immediately visible elements of the vehicle, and the condition or style of that grille sets the tone for everything else. This front middle centre grille is manufactured from high-grade ABS (Acrylonitrile Butadiene Styrene), a material widely used in OEM and aftermarket automotive trim for its resilience to UV exposure, temperature cycling, and low-speed impact. Measuring 112cm wide, 40cm tall, and 12cm deep, this grille has been dimensioned specifically for the 2017 and 2018 model year Discovery 5, ensuring the fitment precision that Land Rover owners rightly expect. Whether you're replacing a damaged factory grille, refreshing worn trim, or simply upgrading the front-end aesthetic of your Discovery 5, this unit delivers a clean, factory-consistent result. At 5kg, it carries the reassuring solidity of a quality component without adding unnecessary bulk to the front end. What's Included 🔲 Front Centre Grille Panel ABS moulded, dimensioned for Discovery 5 2017–2018 🔩 Mounting Hardware Clips and fasteners for secure OE-style fitment 📄 Fitment Guide Basic installation reference included 📦 Protective Packaging Secured for safe international transit Product Highlights Precision-moulded ABS construction for long-term durability Exact fitment for Discovery 5 L462 2017 and 2018 model years CCC certified — independently externally tested Dimensions: 112cm × 40cm × 12cm for accurate fitment 5kg unit weight — solid without excess mass UV and temperature resistant ABS material Direct OE-position replacement — no cutting or modification Clean, factory-consistent finish straight from the box Compatible with standard Discovery 5 front bumper assembly Ships worldwide via DHL, FedEx, UPS, or TNT Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017 Direct Fit Land Rover Discovery 5 L462 2018 Direct Fit Land Rover Discovery 5 L462 2019–2024 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Installation Notes Difficulty: Moderate  |  Estimated Time: 45–90 Minutes  |  Tools Required: Trim removal tools, T20/T25 Torx set, panel clips Ensure the vehicle is parked on a flat surface with the engine off and fully cooled. Disconnect the battery as a precaution before working on front-end trim. Using a trim removal tool, carefully release the existing front grille assembly from the bumper surround. Work from the outer edges inward to avoid stressing the mounting tabs. Locate and remove all factory fasteners, clips, and any secondary fixings holding the centre grille section in place. Note their positions for reassembly. Lift out the existing centre grille panel. Inspect the surrounding bumper trim for any damage before fitting the new unit. Align the new ABS front centre grille into the bumper aperture. Begin seating the mounting tabs from the centre outward to ensure even tension across the panel. Re-secure all fasteners and clips until you feel each one click firmly into position. Do not over-torque any fixings. Step back and visually inspect the panel for even gaps and flush alignment before reconnecting the battery and carrying out a final check. ⚠ Note: This grille is designed for 2017–2018 Discovery 5 variants. If your vehicle was registered in a different model year or has undergone a facelift, please confirm the front bumper specification before fitting. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Discovery 5 Today Victorious Automotive supplies premium Land Rover accessories to owners who refuse to settle. With 12,300+ verified reviews and a 4.9/5 star rating, we're trusted by enthusiasts across the world to get it right. Shop All Discovery 5 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle codes are referenced solely for fitment compatibility purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Body Kits SVO-Style Full Body Kit – Range Rover Vogue L405 (2014–2017) A complete front-to-rear aerodynamic transformation for the L405 Vogue, engineered in OEM-grade polypropylene to deliver the commanding SVO aesthetic your Range Rover deserves. Range Rover Vogue L405 2014–2017 SVO Style PP Polypropylene Full Body Kit Front & Rear Bumpers Door Trim Front Grille Direct Fit 20kg Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that balances commanding road presence with refined British engineering. For owners who want to push that presence further without compromising the vehicle's purity of line, the SVO-style body kit offers a factory-coherent upgrade that reads as intentional rather than aftermarket. This full kit has been developed specifically for the 2014–2017 L405 Vogue facelift generation, covering every major exterior panel zone from the front bumper assembly through to the rear valance. The material specification mirrors that used by Land Rover on original bumpers — injection-moulded polypropylene — meaning fitment tolerances, flex characteristics, and paint adhesion all behave exactly as expected on a vehicle of this calibre. What distinguishes the SVO aesthetic is its restraint. Lower front air intakes are reshaped for improved visual mass. The rear diffuser gains definition. The grille surround sharpens the nose. Taken together, the kit doesn't shout — it focuses the L405's proportions into something more purposeful, more athletic, and undeniably more striking. What's Included 🔲 Front Bumper Assembly SVO-style lower fascia with integrated air intake reshaping and mounting hardware 🔳 Rear Bumper Assembly Redesigned rear lower valance with diffuser-style detail and all fixing accessories ⬛ Front Grille Surround SVO-spec grille frame with sharper profile and refined mesh integration 🟦 Door Trim Mouldings Side body lower trim panels for a cohesive full-perimeter transformation 🔩 Fitting Accessories Kit Clips, fasteners, and hardware required for clean OEM-style installation Product Highlights Precision-engineered for 2014–2017 Range Rover Vogue L405 — no cutting or modification required OEM-grade PP polypropylene — the same material used by Land Rover on original bumper assemblies SVO-inspired design language that complements the L405's factory proportions Lightweight at just 20kg for the complete kit — no adverse effect on vehicle dynamics or fuel economy Full front-to-rear coverage: bumpers, grille, door trim, and accessories in a single package Paintable surface finish — accepts standard automotive primer and topcoat for a factory-matched result Matching flex characteristics to original components — no cracking or stress fractures at panel joins Designed for direct bolt-on fitment using existing factory mounting points and fixings Ships fully protected in custom-formed packaging to prevent transit damage to panel surfaces Available with worldwide shipping via DHL, FedEx, UPS, and TNT to over 100 countries Compatibility Vehicle Model Code Year Range Trim Level Fitment Range Rover Vogue L405 2014–2017 Vogue / SE / Autobiography Direct Fit Range Rover Vogue L405 2013 Pre-facelift variants Verify Before Order Range Rover Vogue L405 2018–2021 Post-facelift variants Not Compatible Range Rover Vogue L460 2022–2026 All trims Not Compatible Range Rover Sport L494 2013–2022 All trims Not Compatible Range Rover Evoque L538 / L551 All years All trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 4–8 Hours  ·  Professional Fit Recommended Before beginning, dry-fit all panels against your vehicle to confirm alignment and identify any panel-specific adjustments needed prior to painting. Remove existing front and rear bumper assemblies, grille surround, and door trim mouldings using appropriate trim removal tools — retain all factory clips and fixings where possible. Clean, prime, and paint all new panels in your chosen colour match using a quality automotive primer and basecoat/lacquer system. Allow full cure time before fitting. Refit the front bumper assembly using existing factory mounting points. Ensure all tab locations align before applying final fixing torque. Reconnect any fog light or sensor wiring looms. Install the front grille surround, clipping into the front bumper carrier and bonnet lower edge as per the original fitment method. Fit door trim mouldings panel by panel, working front to rear, ensuring each clip locates fully before moving to the next section. Install the rear bumper assembly, reconnecting any parking sensor harnesses or tow bar components as applicable. Confirm panel gaps are even before finalising all fixings. Conduct a final visual inspection at eye level on all four sides to confirm panel alignment, consistent shut lines, and secure fitting throughout. ⚠ Important: If your vehicle is fitted with front or rear parking sensors, tow bar electrics, or active air suspension components behind the bumper, we strongly recommend professional installation to ensure all systems are correctly reconnected and remain fully operational. Painting should be completed before fitment — do not attempt to paint panels in situ. Elevate Your L405 Vogue Every detail of this SVO-style kit has been considered for owners who refuse to compromise. Explore the full Range Rover Vogue L405 accessory collection — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification before ordering. Professional installation is recommended for all bodywork components.

Victorious · Premium Accessories · Key Protection Porsche Soft TPU Car Key Cover – Premium Remote Shell Case Precision-engineered protective key cover in soft-touch TPU for all major Porsche models. Shields against impact, scratches, and daily wear. Porsche Cayenne Porsche Boxster Porsche Panamera Porsche Macan TPU Material Soft Touch Overview Porsche owners understand that attention to detail matters—both mechanically and aesthetically. Your key fob is part of that precision engineering, and it deserves protection that matches the quality of your vehicle. This TPU key cover is engineered to shield your remote from the everyday hazards that compromise appearance and function. Manufactured from premium soft-touch TPU (thermoplastic polyurethane), this shell case wraps your Porsche key fob in a lightweight, flexible layer of protection. The material is engineered for durability: it resists cracking, absorbs minor impacts, and won't yellow or degrade over time like cheaper silicone alternatives. The soft-grip finish feels natural in hand and complements any Porsche interior aesthetic. Compatible across Porsche's modern lineup—Cayenne, Boxster (986/987), Panamera, and Macan—this cover installs without tools in under 60 seconds. Available in five finishes: classic Black, sporty Red, elegant Silver, vibrant Pink, and premium Gold. It's the small detail that protects your key investment while keeping your remote looking showroom-fresh. What's Included 🔐 TPU Key Cover Shell One-piece protective case for your Porsche remote ✓ Tool-Free Installation Slide-on design, no disassembly required 🎨 Five Colour Options Black, Red, Pink, Silver, or Gold finish 📦 Premium Packaging Secure shipping, worldwide delivery Product Highlights Soft-touch TPU construction resists cracking and yellowing Lightweight protection adds minimal bulk to your key Impact-absorbing design guards against drops and knocks Compatible with Cayenne, Boxster, Panamera, and Macan models Precision fit ensures buttons remain fully accessible Five premium colour finishes to match your taste Tool-free, one-piece slide-on installation in seconds Protects against scratches, scuffs, and UV fading Durable material outlasts standard silicone cases Aesthetically refined design complements Porsche styling Compatibility Porsche Model Year Range Status Cayenne (all generations) 2003–Present Direct Fit Boxster 986 1996–2004 Direct Fit Boxster 987 2004–2012 Direct Fit Panamera (all generations) 2009–Present Direct Fit Macan (all generations) 2014–Present Direct Fit 911 (modern) 2012–Present Direct Fit Cayman / Cayman S 2005–Present Direct Fit Installation Notes Installation Difficulty: Beginner | Time: 1–2 minutes Ensure your Porsche key fob is clean and dry Gently separate the two halves of the TPU cover Slide your key fob into the bottom half of the shell Press the top half down firmly until it clicks into place Test button responsiveness—all functions should operate smoothly Done. Your key is now protected Note: This cover is designed for standard Porsche remote keys. If you have a custom or aftermarket key, verify dimensions before purchase. To remove, gently pry the two halves apart—no tools needed. Protect Your Porsche Key Today Your key fob deserves the same precision and protection as your Porsche. This TPU cover is engineered to outlast lesser alternatives whilst maintaining the refined aesthetic you expect. Order now and keep your remote looking pristine. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars · 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Porsche AG, Porsche Cars North America, or any Porsche subsidiary. Porsche is a registered trademark of Dr. Ing. h.c. F. Porsche AG. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility and is sold as an aftermarket accessory only.

Victorious Automotive · Range Rover Vogue L405 · Exterior Trim Front Fog Lamp Decorative Trim in Silver — Range Rover Vogue L405 2018–2020 A precision-cut silver ABS trim surround that sharpens the front bumper aesthetic of the L405 Vogue — six pieces, zero modification, lasting finish. Range Rover Vogue L405 2018–2020 ABS Construction Silver Finish 6-Piece Set Adhesive Fit ISO9001 Certified Model: CY1279 Overview The Range Rover Vogue L405 in its 2018–2020 specification represents the pinnacle of the fourth-generation platform — a vehicle with sculpted lines, purposeful proportions, and a front end that commands attention. The fog lamp clusters sit prominently within the lower bumper, and for owners who want that area to carry the same considered detail as the rest of the vehicle, standard plastic surrounds simply don't do it justice. These Silver Front Fog Lamp Decorative Trims are engineered specifically for the L405 Vogue facelift. Each of the six pieces is formed from high-grade ABS — the same class of thermoplastic used throughout premium automotive trim manufacturing — finished in a clean, satin silver that integrates naturally with both the standard chrome pack and the contrast black styling options. The result is a front end that reads sharper, more resolved, and more intentional. Installation requires no tools, no drilling, and no permanent modification. Each trim is pre-cut to the exact contour of the fog lamp recess and secured via industrial-grade adhesive tape that bonds firmly to the painted bumper surface. Whether you're refreshing a daily driver or preparing a vehicle for resale, this is the kind of detail that makes the difference. What's Included 🔲 Silver Fog Lamp Trim Pieces 6 pieces — full set for both fog lamp clusters 🔧 Pre-Applied Adhesive Backing Industrial-grade tape pre-applied to each piece 📋 Installation Guidance Step-by-step fitment instructions included 📦 Protective Packaging Each piece individually wrapped for transit safety Product Highlights Custom-profiled for the L405 Vogue 2018–2020 fog lamp recess — no trimming or modification required High-grade ABS construction resists UV degradation, temperature cycling, and road vibration Satin silver finish complements chrome, gloss black, and contrast trim specifications 6-piece complete set covers both fog lamp surrounds in a single purchase Industrial adhesive backing provides a permanent, rattle-free bond to the bumper surface No drilling, no wiring, no professional fitting — clean DIY installation in under 30 minutes Adds a layer of surface protection to the fog lamp surround against minor stone chips ISO9001 certified manufacturing process ensures consistent quality across every unit Lightweight ABS adds negligible weight — no impact on bumper function or aerodynamics Reversible fitment — trims can be removed cleanly without damage to the original paintwork Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 Facelift 2018–2020 Direct Fit Range Rover Vogue L405 Pre-Facelift 2013–2017 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If your vehicle is not listed or you are unsure of your build date, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔩 Tools Required: None Park your Range Rover Vogue on a flat surface and allow the front bumper to cool to ambient temperature if the vehicle has recently been driven. Thoroughly clean the fog lamp surround area with an isopropyl alcohol wipe or panel wipe solution. Remove all traces of wax, polish, grease, and road contamination. Allow to dry fully — at least 5 minutes. Dry-fit each trim piece to the fog lamp recess without removing the adhesive liner. Confirm the profile sits flush and the contours align correctly before committing. Starting with one side, peel back the adhesive liner from the first trim piece. Align carefully to the fog lamp surround, beginning at one edge and pressing progressively across the surface to avoid air pockets. Apply firm, even pressure across the entire face of each piece for 30–60 seconds to fully activate the adhesive bond. Repeat for all remaining pieces. Allow 24 hours before washing the vehicle to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation in temperatures below 10°C (50°F) — cold temperatures significantly reduce initial adhesive tack and can result in premature lifting. For best results, install indoors or in direct sunlight on a warm day. Upgrade Your L405 Vogue Today Browse the full Victorious range of exterior trim, styling, and protection accessories engineered for the Range Rover Vogue L405 — every piece chosen and tested by enthusiasts who own and drive these vehicles. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle build before purchase.

```html Victorious · Jaguar · Interior Trim Carbon Fiber ABS Center Console Trim for Jaguar XE, XEL, XF, XFL & F-Pace Premium precision-cut carbon fiber console trim elevates your Jaguar's interior with a modern, aggressive finish. XE & XEL XF & XFL F-Pace 2016–2020 ABS Carbon Fiber Direct Fit Overview This carbon fiber ABS center console trim is engineered for Jaguar owners who demand precision and visual impact. Whether you're upgrading a Jaguar XE, XEL, XF, XFL, or F-Pace, this trim transforms your dashboard with a sophisticated, modern aesthetic that commands attention. High-quality ABS construction mimics the appearance of authentic carbon fiber while delivering superior durability and scratch resistance. Each trim is precision-cut to fit seamlessly into your console, with no modification required. Installation is straightforward using automotive-grade adhesive tape—no tools, no fuss. This is one of the most cost-effective ways to refresh your Jaguar's interior. It catches light beautifully, adds depth to your dash, and signals that you care about the details. What's Included 📦 Center Console Trim Precision-cut ABS carbon fiber panel 🔧 Adhesive Tape Factory-spec automotive-grade backing Product Highlights Precision-cut ABS construction mimics carbon fiber finish Direct fit—no drilling, cutting, or modifications Pre-applied automotive adhesive tape for secure mounting Seamless integration with OEM Jaguar interior design Scratch-resistant surface maintains finish over time Simple installation in under 15 minutes Instantly upgrades cabin aesthetics and perceived quality Compatible with XE, XEL, XF, XFL & F-Pace 2016–2020 Single-piece trim—simplified installation Engineered for daily durability and long-term retention Compatibility Jaguar Model Year Range Fit Status XE 2016–2020 Direct Fit XEL 2016–2020 Direct Fit XF 2016–2020 Direct Fit XFL 2016–2020 Direct Fit F-Pace 2016–2020 Direct Fit E-Pace 2018–2020 Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Prepare the area: Clean the center console trim surface with a damp microfiber cloth. Allow to dry completely (5 minutes minimum). Peel adhesive backing: Carefully remove the adhesive tape backing from the trim panel. Align and press: Position the trim over your console, starting from the top. Press firmly in sections, working downward to avoid air bubbles. Secure edges: Once positioned, apply firm pressure across the entire trim for 30 seconds to ensure full adhesion. Allow cure time: Leave the vehicle undisturbed for 24 hours before operating the climate controls or adjusting console components. Note: Adhesive reaches full strength after 24 hours. Avoid touching or moving the trim during this period for optimal durability. Upgrade Your Jaguar Interior Today Transform your XE, XF, or F-Pace with this premium carbon fiber center console trim. Modern, durable, and installed in minutes. Shop the complete collection of Jaguar interior upgrades now. View All Jaguar Trim Use code 22GET20 for 20% off any 2 items 4.9/5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx & UPS shipping ✓ UK support: +44 203 943 9919 Victorious Automotive is not affiliated with Jaguar Land Rover, Jaguar Cars Limited, or any official Jaguar distributor. All vehicle names, logos, and specifications are the property of their respective manufacturers. This product is designed for aftermarket fitment only. Always consult your vehicle's manual before installation. Victorious Automotive accepts no liability for improper installation or damage resulting from use. ```

```html Jaguar · E-Pace & Multi-Model · Exterior Trim ABS Chrome Door Handle Trim Set – Jaguar XE, XF, F-Pace & E-Pace Elevate your Jaguar's exterior with precision-engineered chrome door handle covers. Direct-fit styling in just minutes. E-Pace XE X760 XF X260 F-Pace X761 ABS Chrome 8pc Set Exterior Trim Overview Jaguar owners demand refinement in every detail. This chrome door handle trim set delivers the premium finish your E-Pace, XF, XE, or F-Pace deserves—combining sophisticated aesthetics with durable, weather-resistant engineering. The set includes eight precision-cut ABS chrome pieces that frame your door handles in elegant contrast. Each piece is engineered for exact fitment across Jaguar's contemporary lineup, transforming your vehicle's exterior presence without modification or permanent alteration. Whether you're refreshing a daily driver or maintaining concours-level presentation, this trim set represents practical luxury. Install in under 15 minutes with no tools required. The hardened ABS material resists UV fading, road salt, and thermal stress—keeping your Jaguar looking showroom-fresh for years. What's Included 🚪 Door Handle Covers 8× ABS chrome trim pieces ✨ Pre-Fitted Design Ready to install, no cutting 🛡️ UV & Salt Resistant Durable ABS material 📋 Installation Guide Step-by-step instructions Product Highlights Complete 8-piece set covers all door handles Premium ABS construction with chrome finish Direct fit—no modification required Installs in under 15 minutes Resistant to UV fading and road salt Enhances exterior elegance instantly OEM-quality precision engineering Compatible with all trim levels Non-permanent application Weather-tested durability Compatibility Jaguar Model Generation / Code Fit Status E-Pace All years Direct Fit XE X760 Direct Fit XF X260 Direct Fit F-Pace X761 Direct Fit Installation Difficulty: Beginner | Time: 10–15 minutes | Tools: None required Clean the door handle area with a damp cloth and allow to dry completely. Remove the adhesive backing from each chrome trim piece. Align the first trim piece carefully over the door handle frame. Press firmly for 5 seconds to ensure full contact and adhesion. Repeat steps 3–4 for all remaining pieces on all four doors. Allow adhesive to cure for 24 hours before touching handles. Inspect all seams for proper alignment and full contact. Note: Clean surfaces thoroughly with rubbing alcohol before application for maximum adhesion. Avoid installation in temperatures below 50°F or above 85°F. Elevate Your Jaguar Today Premium exterior detailing starts with thoughtful trim upgrades. This chrome door handle set delivers the refinement every Jaguar deserves—without compromise. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping ☎ +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Jaguar Cars Limited, or their parent companies. All vehicle names and model designations are the property of their respective manufacturers. This product is designed for aftermarket fitment only. ```

Premium Automotive · Mercedes-AMG · Aerodynamic Styling Carbon Fiber Rear Trunk Spoiler – W205 C63 AMG Coupe Aggressive aerodynamic styling and authentic carbon fiber construction for the 2015–2017 Mercedes-AMG C63 2-Door Coupe. W205 2015–2017 Carbon Fiber 3x3 Twill Weave Vacuum Molded Plug & Play Overview The Mercedes-AMG W205 C63 Coupe commands attention from every angle—and this carbon fiber rear trunk spoiler amplifies that aggressive stance. Built with authentic vacuum-molded carbon fiber, it delivers the visual presence of factory AMG performance while reducing unsprung weight at the rear axle. Engineered for direct fitment on 2015–2017 C63 2-door models, this spoiler combines functional aerodynamic improvement with the unmistakable visual signature of genuine carbon. The 3x3 twill weave pattern catches light and shadow, creating depth and dimension that synthetic alternatives simply cannot replicate. At just 0.7 kg, it's a weight-conscious upgrade that does more than look the part. Installation is straightforward thanks to included 3M adhesive tape. No drilling, no permanent modifications—only reversible styling and aerodynamic gain. Whether you're track-focused or street-oriented, this spoiler signals serious intent and genuine engineering. What's Included 🪨 Carbon Fiber Spoiler Vacuum molded, 3x3 twill pattern 📌 3M Adhesive Tape Industrial-grade bonding system Product Highlights Genuine carbon fiber construction via vacuum molding Lightweight 0.7 kg, minimal unsprung weight 3x3 twill weave for authentic appearance Improves rear aerodynamic balance and downforce Reduces lift at highway and track speeds Direct fit—no modifications required Professional-grade 3M adhesive tape included Sleek matte black finish 125 x 30 x 4 cm dimensions Reversible installation, no drilling Compatibility Model Years Body Style Status Mercedes-AMG C63 Coupe 2015–2017 W205 2-Door Direct Fit Mercedes-AMG C63 Sedan 2015–2017 W205 4-Door Not Compatible Mercedes-AMG C63 Cabriolet 2015–2017 W205 Convertible Not Compatible Mercedes-AMG C43 / C450 2016–2017 W205 Coupe Not Compatible Installation Difficulty: Beginner | Time: 20–30 minutes Preparation: Park on level ground. Clean the rear trunk lid and surrounding area thoroughly with isopropyl alcohol and allow to dry completely. Remove protective release film from 3M tape. Alignment: Dry-fit the spoiler on the trunk. Center it horizontally and position vertically according to personal preference. Mark alignment points lightly with tape or dry-erase marker. Bonding: Carefully peel back one section of the 3M tape backing and press the spoiler firmly into position. Work methodically across the entire contact surface to ensure uniform adhesion. Curing: Allow 24 hours for adhesive curing before exposing the vehicle to extreme temperatures, car washes, or highway driving. Verification: Inspect all edges and corners after 24 hours to confirm solid bond. No additional fasteners or drilling required. Important: Professional installation is strongly recommended to guarantee proper alignment and finish. Poor surface preparation or misalignment can compromise both aesthetics and adhesion longevity. If unfamiliar with carbon fiber handling, defer to a certified installer. Specifications Specification Detail Material Carbon Fiber (Vacuum Molded) Finish Matte Black, 3x3 Twill Weave Weight (Net) 0.7 kg Weight (Packaged) 1.8 kg Product Dimensions 125 × 30 × 4 cm (L × W × H) Packing Dimensions 160 × 50 × 25 cm Installation Method 3M Adhesive Tape (No Drilling) Fit Type Direct Fit – W205 2-Door Coupe Only Ready to Elevate Your C63? Carbon fiber aerodynamic styling isn't just about looks—it's about engineering intent, weight efficiency, and the confidence that comes with genuine craftsmanship. This spoiler delivers all three. Shop Now Use code 22GET20 for 20% off any 2 items 4.9 / 5 · 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, AMG, Daimler AG, or their subsidiaries. All product names, logos, and brands are property of their respective owners. Product descriptions are for reference only and do not constitute endorsement or sponsorship. Always verify compatibility before purchase.

Victorious · Range Rover Evoque L551 · Interior Trim Carbon Fiber Gear Shift Surround Trim – Range Rover Evoque L551 Elevate your Evoque's cabin with authentic carbon fiber accents that add premium presence to your gear surround area. L551 2019–2020 Carbon Fiber Interior Trim Peel & Stick Overview If you own a Range Rover Evoque L551 from 2019 or 2020, you understand the importance of refined interior details. The gear surround area is one of the first things your hand touches every time you shift—it deserves to reflect your standards. Our Carbon Fiber Gear Shift Surround Trim transforms that critical touchpoint into a statement of quality and taste. This isn't a generic trim piece. It's engineered specifically for your Evoque's geometry, with a finish that matches the sophistication of the cabin. Real carbon fiber construction delivers both visual depth and durability, resisting fading and wear far better than cheaper alternatives. The tactile quality instantly communicates "premium" to every passenger. Installation is genuinely straightforward—pre-applied adhesive backing means no tools, no mess, no guesswork. The piece bonds cleanly to your original surround, creating a factory-finished appearance in under five minutes. This is the kind of upgrade that changes how your interior feels every single day. What's Included 🎁 Carbon Fiber Surround Trim Pre-fitted, ready to install on L551 ✓ Pre-Applied Adhesive Backing Peel and stick installation, no tools needed 📋 Installation Guide Step-by-step instructions included Product Highlights Genuine carbon fiber construction, not vinyl wrap Precision-molded to fit L551 geometry perfectly High-gloss finish resists fingerprints and UV fading Pre-adhesive backing eliminates installation guesswork Factory-finished appearance when installed correctly Complements all interior trim packages and leather options Lightweight, adds zero weight to your vehicle Long-lasting durability under daily use Simple removal if refinishing your cabin later Enhances perceived interior quality significantly Compatibility Model Year Generation Fit Range Rover Evoque 2019 L551 Direct Fit Range Rover Evoque 2020 L551 Direct Fit Range Rover Evoque 2018 & Earlier L538 Not Compatible Range Rover Evoque 2021+ L551 (Facelift) Not Compatible Installation Difficulty: Easy | Time: 5 minutes Prepare the surface: Clean the existing gear surround with a dry, lint-free cloth. Remove any dust or debris. Ensure the surface is completely dry. Position the trim: Carefully align the carbon fiber piece above the surround, checking alignment before committing adhesive to contact. Apply gradually: Peel the backing tape slowly, pressing down firmly with the palm of your hand as you work from top to bottom. Use light, even pressure. Secure the edges: Pay special attention to corners and edges. Press firmly for 10–15 seconds to ensure full contact and adhesion. Allow curing time: Avoid touching, shifting, or placing any weight on the trim for 24 hours after installation. Important: Keep the trim dry for the first 24 hours. Do not wash your vehicle's interior or expose the installation to moisture during the adhesive curing period. Premature contact with water can compromise bonding. Why Victorious Carbon fiber trim is only as good as its fitment and finish. We source materials from suppliers who understand Range Rover's exacting standards. Every piece is quality-checked before shipment. We back every purchase with our 30-day money-back guarantee—if it doesn't meet your expectations, we'll refund you without questions. Over 12,300 verified reviews at 4.9 stars prove our commitment to excellence. Ready to Upgrade Your Evoque's Interior? Transform your gear surround from ordinary to exceptional. This small change delivers outsized impact every time you drive. Shop Range Rover Evoque L551 Trim Use code 22GET20 for 20% off when buying 2 items 4.9★ 12,300+ verified reviews ✓ 30-day guarantee 📦 Worldwide shipping ☎ +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any official Land Rover subsidiary. All vehicle names and trademarks are the property of their respective owners. Our products are designed for fitment and aesthetic enhancement only.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Cup Holder for Range Rover Velar 2017–2020 Transform your rear cabin with hand-fitted carbon fibre detailing that rivals SVR specification models. Velar 2017–2020 Carbon Fibre Clip-On SVR Look Premium TPU Overview The Range Rover Velar remains one of the most beautifully proportioned luxury SUVs on the road. Its minimalist interior philosophy extends to the rear cabin, where understated climate controls occupy the space between rear seats. If you own a 2017–2020 Velar and want the assertive presence of an SVR variant without the full powertrain commitment, this carbon fibre rear cup holder upgrade is your answer. This is a direct replacement for the standard cup holder cover. Instead of blending with the plastics around it, high-grade carbon fibre TPU creates a striking focal point that catches light and draws the eye downward. The weave pattern reflects attention to detail—the kind you'd find in Range Rover's dedicated performance division. Each piece is laser-cut for absolute precision, meaning zero gaps, zero alignment guesswork, and zero disappointment when it arrives. Installation takes minutes. The new cover simply clips over your existing climate control housing. No tools, no drilling, no modifications to the vehicle. Remove it in seconds if needed. It's the ideal entry point into carbon interior styling, and a perfect pairing for other SVR upgrades like door handles, shift paddles, or centre console trims. What's Included 📦 Carbon Fibre Cup Holder Cover Precision laser-cut TPU with 3K weave finish 🔧 Installation Guide Step-by-step photo instructions included ✨ Cleaning Cloth Microfibre cloth to maintain finish Product Highlights Hand-fitted carbon fibre TPU material for premium durability Laser-cut precision ensures perfect alignment first time Clips over existing climate control housing—no permanent modification Matches SVR interior specification look and feel Lightweight yet rigid construction withstands daily use Authentic 3K carbon weave visible through clear topcoat Weather-resistant material safe for all cabin temperatures Part of Victorious Automotive carbon interior package ecosystem Works seamlessly with factory rear cup holder functionality 30-day money-back guarantee—zero risk to try Compatibility Model Year Range Status Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Evoque All Years Not Compatible Range Rover Sport All Years Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Power off the vehicle and ensure the cabin has cooled to room temperature. Locate the rear cup holder cover (climate control panel between rear seats). Gently lift the existing cover to expose the clip points underneath. Align the carbon fibre cover with the four mounting clips and press firmly downward until you hear a click at each corner. Verify the cover sits flush with no rocking or movement. Test cup holder functionality. Clean the exposed carbon fibre weave with the included microfibre cloth. Note: The climate control functionality below remains unchanged. This cover sits on top and does not interfere with airflow or controls. If the cover feels loose after installation, remove it and inspect clips for debris. Complete Your SVR Interior Ambition One detail at a time, you can transform your Velar into the high-performance variant you love. This carbon rear cup holder is the perfect starting point—affordable, reversible, and instantly visible to anyone who rides in the rear cabin. Explore All Velar Upgrades Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any parent company. All vehicle names, logos, and trademarks are the property of their respective owners and used for identification purposes only. Product fitment and compatibility are based on manufacturer specifications and field testing. Always verify compatibility before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver ABS Door Speaker Decoration Trim — Range Rover Velar 2017–2020 Precision-cut matte silver TPU trim panels that clip directly over your Velar's existing door speaker surrounds — delivering an instant SVR-inspired interior upgrade with zero permanent modification. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Set of 4 Clip-On Fit SVR Look Interior Trim No Drilling Overview The Range Rover Velar is one of the most design-forward vehicles Land Rover has produced — every surface, every line considered. But the standard door speaker surrounds, while clean, leave room for the kind of elevated finish that owners of this calibre of vehicle rightly expect. These matte silver door speaker decoration trims are engineered precisely for that gap between standard and exceptional. Crafted from high-grade ABS with a premium TPU overlay in a refined matte silver finish, each piece is laser-cut to match the exact curvature and geometry of the Velar's door panel architecture. The result is a flush, factory-quality appearance that draws the eye without overwhelming the cabin's restrained design language. Think of it as the detail that makes the interior feel complete — the kind of finish you'd expect on the SVR specification. Installation requires no tools, no adhesives, and no modification to your vehicle. Each trim panel clips securely over the existing door speaker cover using a precision retention system, meaning they can be fitted or removed in minutes. As part of our wider Velar Interior Package series, these trims pair beautifully with our dashboard, centre console, and door handle accent pieces for a fully cohesive interior transformation. What's Included 🔲 Front Left Speaker Trim Driver-side door, precision laser-cut fit 🔲 Front Right Speaker Trim Passenger-side door, mirror-matched profile 🔲 Rear Left Speaker Trim Rear driver-side door panel fitment 🔲 Rear Right Speaker Trim Rear passenger-side door panel fitment 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Matte silver finish for a premium, understated aesthetic High-grade ABS construction with quality TPU surface layer Laser-cut for exact dimensional accuracy and panel alignment Clip-on installation — no tools, drilling, or adhesives required Full set of four pieces covers all door speaker positions Replicates the SVR interior specification look and feel Completely reversible — original trim remains undamaged UV-stable finish resists discolouration and interior sun exposure Fits seamlessly within the Velar's existing door panel geometry Part of a wider Velar interior trim collection for cohesive styling Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2021–2022 All Variants Verify Before Purchase Range Rover Evoque (L538) All Years All Variants Not Compatible Range Rover Evoque (L551) All Years All Variants Not Compatible Range Rover Sport (L494) All Years All Variants Not Compatible Range Rover Vogue (L405) All Years All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Clean each door speaker surround thoroughly using a microfibre cloth to remove any dust, oils, or residue that could prevent a secure fit. Remove each trim panel from its packaging and identify the correct piece for each door position — front left, front right, rear left, rear right. Hold the trim panel against the corresponding speaker surround and align the outer edges carefully with the existing door panel profile. Apply gentle, even pressure across the surface of the trim — starting from the centre and working outward — until all retention clips engage and the panel sits flush. Run your finger around the perimeter of each piece to confirm full seating and check for any gaps or misalignment before closing the doors. Repeat for all four door positions. No adhesive, heat gun, or additional fixings are required. Note: Ensure the door panel surface is completely dry before fitting. Do not force the clips if the panel feels misaligned — reposition and re-attempt to avoid stress marks on either the trim piece or the original door cover. Explore More Velar Accessories This trim is part of our curated Range Rover Velar interior and exterior collection. Browse the full range of accessories designed specifically for your vehicle at victorious.shop/collections/range-river-velar. Elevate Your Velar Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision accessories that respect the vehicle as much as you do. Worldwide shipping via DHL, FedEx, UPS, and TNT — and a 30-day money-back guarantee on every order. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Electronic Handbrake Switch Frame — ABS Interior Trim for Range Rover Velar 2017–2020 Elevate your Velar's centre console with a precision-cut matte silver handbrake switch surround that delivers the premium SVR aesthetic in minutes — no tools required. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Electronic Handbrake Frame Clip-On Fit No Drilling SVR Style Interior Trim Overview The Range Rover Velar introduced one of the most architecturally refined interiors Land Rover has ever produced — a clean, horizontal layout anchored by a dual-stack touchscreen and a beautifully minimal centre console. It's a cabin that rewards attention to detail, and that means even the smallest trim panels can make a meaningful difference to how the whole interior reads. This matte silver electronic handbrake switch frame is precision laser-cut to wrap seamlessly around the existing parking brake control area on Velar models produced between 2017 and 2020. Manufactured from high-quality ABS and TPU, the finish is a sophisticated brushed silver that closely mirrors the uprated trim found on top-specification and SVR-inspired Range Rover interiors. It clips directly over the factory surround without any adhesive, drilling, or modification to your vehicle's existing panels. Forming part of our broader Velar Interior Package range, this piece is designed to be combined with other silver trim upgrades across the console and door cards for a fully cohesive, factory-upgrade appearance. Whether you're making a single focused improvement or building out a complete interior refresh, this handbrake frame is an effortless starting point with an impact well above its price point. What's Included 🖼️ Handbrake Switch Frame Matte silver ABS/TPU surround, laser-cut to shape 📋 Fitting Instructions Simple clip-over guidance included Product Highlights Precision laser-cut for an exact, flush fit on the Velar centre console Matte silver finish matches SVR and top-specification Range Rover trim tones Clips directly over the existing handbrake surround — zero drilling required High-quality ABS and TPU construction for long-term durability and colour stability No adhesives needed — fully reversible upgrade with no damage to factory trim Designed as part of a wider Velar interior trim package for a cohesive look Covers the parking brake control area without interfering with switch operation Resistant to the daily wear of UV exposure, temperature change, and handling Achieves the premium SVR interior aesthetic without the cost of a full retrim Compatible with both standard and upgraded centre console configurations on the Velar Compatibility Vehicle Years Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic, First Edition Direct Fit Range Rover Velar (L560) 2021–2023 All Trims Verify Before Purchase Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Evoque L538 / L551 All Years All Trims Not Compatible Land Rover Discovery 5 All Years All Trims Not Compatible If your Velar was produced after 2020 or you are unsure of your build date, please contact our team on +44 203 943 9919 before ordering. Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure your vehicle is parked, the engine is off, and the electronic handbrake is engaged in its resting position. Clean the existing handbrake surround area with a dry microfibre cloth to remove any dust or residue that could interfere with the clip fit. Align the matte silver frame over the factory handbrake switch surround, checking that the cutouts line up precisely with the switch housing. Apply even, firm pressure around the perimeter of the frame until all retaining clips engage and the trim sits flush against the existing panel. Run your finger around all edges to confirm there are no lifted sections or gaps — the piece should feel solid and fully seated. Step back and inspect the fitment. For best results, pair with other Victorious silver interior trim pieces from our Velar collection. Note: Do not apply adhesive or heat. This trim is designed to be fully reversible. If resistance is felt during installation, check alignment before applying further pressure. Forcing a misaligned piece may cause minor scuffing to the factory surround. Complete Your Velar Interior This handbrake frame is one component of our full Range Rover Velar interior trim package. Browse the complete collection to match your console, door switches, air vent surrounds, and gear selector area in the same matte silver finish for a fully unified result. → Browse All Range Rover Velar Accessories Upgrade Your Velar Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Worldwide shipping via DHL, FedEx, and UPS — backed by our 30-day money-back guarantee. Shop Velar Interior Trim Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque L538 · Exterior Styling Carbon Fibre Mirror Cover Frame for Range Rover Evoque L538 2012–2017 Precision-formed carbon fibre mirror cover frames that replace your factory housings with a sharper, motorsport-inspired finish — no cutting, no drilling, no compromise. Evoque L538 2012–2017 Carbon Fibre Direct Fit No Modification ISO9001 Certified Bosoner · AJLN1009 Decoration & Protection Overview The Range Rover Evoque L538 arrived as one of Land Rover's most design-forward products — a compact SUV that blurred the line between urban style and genuine off-road pedigree. Its sculpted flanks and bold shoulder line made exterior details matter more than on almost any other vehicle in the Land Rover range. Owners who care about that visual identity understand that even the mirror housings contribute meaningfully to the overall stance of the car. These carbon fibre mirror cover frames from Bosoner are engineered specifically for the first-generation Evoque (L538, 2012–2017) and are formed to the exact profile of the factory housings. The real carbon fibre weave finish is applied under high-pressure moulding to deliver the depth, clarity, and cross-hatched texture that separates genuine carbon from the vinyl wraps and plastic imitations that flood the market. Up close, the difference is immediate and unmistakable. Beyond aesthetics, the carbon fibre construction provides meaningful surface protection — guarding against stone chips, UV fade, and the micro-abrasions that dull painted mirror caps over time. Whether you're building a blacked-out stealth look or simply want to inject a motorsport material into the Evoque's exterior, these covers are a considered, high-impact upgrade that takes under an hour to fit. What's Included 🪞 Left Mirror Cover Frame Driver-side housing, pre-formed to L538 profile 🪞 Right Mirror Cover Frame Passenger-side housing, matched pair 🔧 Fitting Adhesive Tape Pre-applied 3M-grade bonding tape 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine carbon fibre construction with visible weave texture Precision moulded to original Evoque L538 mirror dimensions ISO9001 quality certified manufacturing process No drilling, cutting, or modification required UV-resistant clear coat lacquer over carbon weave Pre-applied 3M-grade adhesive for a secure, lasting bond Significant weight reduction versus OEM painted plastic caps Adds surface protection against stone chips and abrasion Sold as a matched pair — left and right included Compatible with all trim levels of the 2012–2017 Evoque Compatibility Vehicle Code Year Range Fit Range Rover Evoque 3-Door L538 2012–2017 Direct Fit Range Rover Evoque 5-Door L538 2012–2017 Direct Fit Range Rover Evoque Convertible L538 2016–2017 Direct Fit Range Rover Evoque (Facelift) L538 2015–2019 Direct Fit Range Rover Evoque L551 2019–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2017–Present Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: None Thoroughly clean the existing mirror housings with an isopropyl alcohol wipe to remove all wax, grease, and road film. Allow to dry fully before proceeding. Dry-fit both carbon fibre covers against the mirror housings to confirm alignment and check for any fitment anomalies before committing to the bond. Peel the backing from the pre-applied adhesive tape on the reverse of each cover, taking care not to touch the adhesive surface. Align the cover carefully at the top edge of the mirror housing and press firmly into position, working downward to avoid trapping air bubbles beneath the surface. Apply firm, sustained pressure across the entire cover surface for approximately 60 seconds to activate the adhesive bond. Repeat for the second mirror cover. Allow a minimum of 2 hours cure time before driving — 24 hours is recommended in cold or damp conditions. ⚠ Important: Do not wash the vehicle or expose the covers to high-pressure water for at least 24 hours after fitting. Surface temperature should be above 10°C during installation for optimal adhesive performance. Shop the Full Evoque Collection Explore our complete range of interior and exterior upgrades built specifically for the Range Rover Evoque L538 — from carbon trim to protective accessories, all curated by specialists who know these vehicles inside out. Shop Range Rover Evoque L538 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Mercedes G-Class · 2015-2017 · Carbon Fiber Mercedes-Benz C-Class W205 C63 AMG Carbon Fiber Trunk Spoiler – 2015–2017 Aggressive PS Style high-kick spoiler crafted from genuine 3K carbon fiber for unmistakable AMG presence and lightweight performance. W205 C63 AMG 2015-2017 Real Carbon Fiber PS Highkick Design Direct Fit Overview The 2015–2017 Mercedes-Benz C-Class W205 sits at the intersection of compact luxury and raw AMG performance. The C63 variant demands visual aggression that matches its turbocharged engine note. This carbon fiber trunk spoiler delivers that statement without compromise. Built from genuine 3K twill weave carbon fiber, this PS Style high-kick spoiler transforms the C63's rear profile into something unmistakably track-focused. The glossy UV-resistant clear coat protects against sun fade while maintaining that mirror-finish shine that catches every angle. It's not just styling—the aerodynamic profile adds functional downforce on higher speeds, keeping your sedan planted. Installation is straightforward adhesive application to the stock trunk lid, with no drilling or cutting required. The result is a bolt-on upgrade that elevates C63 presence without sacrificing subtlety. Whether parked or at speed, this spoiler announces your commitment to performance aesthetics. What's Included 📦 Carbon Fiber Trunk Spoiler Genuine 3K twill, glossy finish ✓ Pre-Fitted Hardware Adhesive backing included 📋 Installation Guide Step-by-step with diagrams 🛡️ UV Protection Coating Prevents color fade over time Product Highlights Genuine 3K twill weave carbon fiber—lightweight yet rigid PS Style high-kick design for aggressive AMG aesthetics UV-resistant clear coat prevents yellowing and fade Direct adhesive installation—no drilling required Enhanced rear aerodynamic profile for improved downforce Glossy finish maintains mirror-bright reflection 1–3mm tolerance variation due to hand-finish manufacturing Compatible with all 2015–2017 W205 C-Class 4-door sedans Designed for sedan body styles only Professional installation recommended for optimal fit Compatibility Model Years Body Style Fitment C63 AMG 2015–2017 4-Door Sedan Direct Fit C400 2015–2017 4-Door Sedan Direct Fit C300 2015–2017 4-Door Sedan Direct Fit C200 2015–2017 4-Door Sedan Direct Fit C180 2015–2017 4-Door Sedan Direct Fit C63 / All Models 2015–2017 Coupe Not Compatible C63 / All Models 2015–2017 Convertible Not Compatible Installation ⏱️ Difficulty: Moderate | Time: 45–60 minutes Clean the trunk lid surface thoroughly with isopropyl alcohol and allow to dry completely. Test-fit the spoiler without adhesive to confirm alignment and position. Mark reference points on the trunk using painter's tape for precise repositioning. Remove protective backing from adhesive pads on the spoiler base. Align the spoiler carefully and apply firm pressure across the entire base for 2–3 minutes. Allow adhesive to cure for 24 hours before driving or exposing to moisture. Inspect seams and edges for any gaps; reapply pressure if needed. Installation Note: Professional installation is highly recommended to ensure proper alignment and adhesive bond. Incorrect installation may void warranty. Allow full 24-hour cure time before car wash or moisture exposure. Elevate Your C63 Presence This carbon fiber spoiler transforms your 2015–2017 W205 C63 AMG from sleek sedan to unmistakable performance statement. Genuine 3K carbon fiber, PS Style aggression, and professional-grade durability—all in one piece. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars – 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💰 30-day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz, AMG, Daimler AG, or any official Mercedes-Benz entity. All product names, logos, and trademarks are the property of their respective owners. This product is designed as an aftermarket accessory and is sold as-is for customization purposes only. Fitment accuracy depends on correct vehicle identification and professional installation. Warranty excludes damage from improper installation, accidents, or weather exposure.

Victorious · Jaguar · Interior Trim Carbon Fibre Central Console Gear Shift Frame Cover for Jaguar XE & XF Premium carbon fibre interior trim that elevates your Jaguar's cockpit with motorsport-inspired styling and lasting protection. XE X760 XF X260 2015–2018 Carbon Fibre Direct Fit 3D Sticker Overview The Jaguar XE and XF are built for drivers who demand precision and presence. This carbon fibre central console gear shift frame cover trim panel transforms your interior with authentic 3D carbon fibre texture—adding depth, contrast, and technical elegance to one of the most-viewed areas of your cabin. Unlike flat decals, this premium 3D sticker features genuine colour-change technology that reveals subtle shifts in tone as light plays across the weave. Crafted from durable ABS with self-adhesive backing, it installs flush with OEM panels and requires no tools, drilling, or modification. Built for XE (X760, 2015–2018), XF (X260, 2016–2018), and F-Pace (X761, 2016–2018) models, this trim panel protects against scuff marks and wear while delivering the visual impact of a full interior upgrade in minutes. What's Included 🎨 Carbon Fibre Frame Cover 3D textured sticker, OEM-size fit ✓ Self-Adhesive Installation No tools or permanent modification 🛡️ Protection & Decoration Shields against scratches and UV fade 📦 Ready to Install Ships unpacked for freshest adhesive Product Highlights Authentic 3D Carbon Fibre Texture – Woven weave pattern with tactile depth Colour-Change Finish – Responds to light for dynamic visual appeal Premium ABS Material – Hard-wearing, UV-resistant, long-lasting durability OEM-Spec Fitment – Engineered to OEM dimensions for XE, XF, F-Pace Self-Adhesive Installation – No cutting, drilling, or modification required Seamless Integration – Sits flush with factory panels, looks factory-fitted Interior Protection – Guards against scuffs, marks, and daily wear Motorsport Aesthetic – Elevates cabin ambience with technical precision styling Reversible Application – Removable without residue (clean surface required) Model-Specific Design – Tailored to central console layout of each platform Compatibility Chart Model Year Range Engine Fitment Jaguar XE (X760) 2015–2018 All Direct Fit Jaguar XF (X260) 2016–2018 All Direct Fit Jaguar F-Pace (X761) 2016–2018 All Direct Fit XE Pre-2015 Before 2015 All Not Compatible XF Pre-2016 Before 2016 All Not Compatible Installation Guide Difficulty: Easy | Time: 10–15 minutes Prepare the surface: Clean the central console gear shift frame thoroughly with mild soap and water. Dry completely with a soft cloth. Any dust or oils will compromise adhesion. Test fit (optional): Hold the sticker in place without removing backing to ensure alignment and coverage. Remove backing: Peel away the protective backing slowly, exposing the self-adhesive surface. Apply the sticker: Carefully position the frame cover onto the central console, starting from one edge and pressing down gradually to avoid air bubbles. Press and smooth: Use gentle, even pressure (soft cloth or hand) to ensure complete contact across the entire surface. Allow to set: Leave untouched for 24 hours before operating the gear shift to allow adhesive to cure fully. ⚠️ Important: Application on hot or dirty surfaces will reduce adhesion. Ensure the gear shift frame is at room temperature and clean before installing. Do not remove or reposition within 24 hours of application. Ready to Upgrade Your Jaguar Interior? This carbon fibre frame cover delivers premium aesthetics and protection in a single, self-adhesive application. Transform your XE or XF's cockpit with motorsport-inspired styling that turns heads and stands the test of time. Shop Now Apply code 22GET20 for 20% off when you order any 2 items. 4.9/5 – 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 UK support: +44 203 943 9919 Victorious Automotive is an independent automotive accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Jaguar Cars Limited, or any official Jaguar brand entity. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket customisation and does not modify or void any manufacturer warranty when installed correctly.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Silver & Gold Gear Shift Button Cover Trim for Range Rover Vogue & Sport (2014–2023) A precision-fit chrome and Swarovski-style diamond accent trim that transforms your gear selector area into a genuine focal point of your Range Rover's cabin — installed in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2023 Chrome Finish Swarovski-Style Accents Silver & Gold Adhesive Fit Interior Trim Gear Shift Cover Overview The Range Rover Vogue L405 and Sport L494 occupy a class of their own — vehicles where interior quality is scrutinised as closely as on-road performance. From 2014 through to the 2023 model year, both platforms share a cabin language built around layered surfaces, contrast detailing, and restrained luxury. It's a space where even the smallest upgrade, placed correctly, can feel completely factory-intended. This Gear Shift Button Cover Trim is designed precisely for that philosophy. Finished in polished chrome with Swarovski-style crystal accents, it overlays your existing gear selector button surround and immediately elevates the visual weight of the centre console area. Available in both silver and gold finishes, it complements dark interior colourways and contrasts beautifully against lighter leathers — giving owners a genuine choice of character rather than a single forced aesthetic. The trim is constructed from high-grade chrome-plated material that resists fingerprints and maintains its lustre over time. Pre-applied adhesive tape on the reverse face means fitment is clean, repeatable, and completely reversible — no drilling, no cutting, no risk to your vehicle's original surfaces. For owners who want a more bespoke interior without committing to a full retrofit, this is one of the most impactful single-piece upgrades available. What's Included ⚙️ Gear Shift Button Cover Trim One-piece chrome unit with Swarovski-style accents — silver or gold finish as selected 🔧 Pre-Applied Adhesive Tape Factory-bonded to the reverse face — no separate adhesive preparation required 📄 Fitment Guide Step-by-step instructions for a clean, confident installation Product Highlights Precision-designed to fit the gear selector button surround of L405 Vogue and L494 Sport models from 2014–2023 Available in polished silver chrome and warm gold chrome — both complementary to OEM interior palettes Swarovski-style crystal diamond detailing adds tactile depth and genuine sparkle to the centre console High-grade chrome-plated construction resists tarnishing, smudging, and daily wear Pre-applied automotive-grade adhesive tape ensures a secure, vibration-resistant bond No tools, no drilling, no permanent modification — fully reversible installation Installed in under two minutes — a genuine weekend upgrade with lasting visual impact One-piece design sits flush against the OEM surface with no visible gaps or proud edges Enhances the perceived quality of the centre console without altering button function Pairs naturally with other chrome interior trim upgrades for a cohesive, elevated cabin aesthetic Compatibility Model Code Years Compatibility Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2026 Not Compatible Unsure about your specific model year or build? Call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes 🛠 Difficulty: Very Easy  ·  ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Tools Required: None Thoroughly clean the existing gear shift button surround using an isopropyl alcohol wipe or a lint-free cloth. Ensure the surface is fully dry before proceeding — any residue or moisture will affect adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse face of the trim piece. Handle the chrome face carefully to avoid fingerprints. Align the trim piece carefully over the gear selector button surround, confirming the orientation matches before contact is made. Apply firm, even pressure across the entire surface for 30–60 seconds, working from the centre outward to eliminate any air pockets beneath the trim. Allow the adhesive to cure for at least one hour before exposing the area to direct sunlight or elevated cabin temperatures. ⚠ Important: Do not apply to surfaces that are damp, freshly conditioned with leather products, or recently cleaned with silicone-based dressings. These will prevent the adhesive from bonding correctly. If you need to reposition the trim, do so gently and immediately — once fully cured, repositioning may reduce bond strength. Elevate Every Detail At Victorious Automotive, we believe the interior of your Range Rover should reflect the same standard of finish as the exterior. This gear shift trim is a small change with a disproportionate visual return — and it's backed by our 30-day money-back guarantee. Shop All Range Rover Vogue Accessories Shop All Range Rover Sport Accessories Buying two items? Use code 22GET20 at checkout for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Swarovski® is a registered trademark of Swarovski AG — crystal-style accents included with this product are decorative aftermarket elements and are not manufactured by or affiliated with Swarovski AG.

Victorious · Defender L663 · Exterior Real Carbon Fibre Front Bumper Grille Covers – Defender 90 / 110 / 130 Authentic carbon fibre grille panels that elevate your Defender's front-end aesthetic with precision engineering and uncompromising quality. L663 2020–2026 Real Carbon Fibre Direct Fit 90 / 110 / 130 Overview The modern Defender 90, 110, and 130 (L663) have redefined what a working 4x4 can be. With their bold, purposeful grille design, they command presence on any terrain. These Real Carbon Fibre Front Bumper Grille Covers are engineered to amplify that statement—replacing the standard plastic inserts with authentic woven carbon, instantly sharpening your Defender's stance. Machined from premium real carbon fibre composite, these covers slot directly into your existing bumper grille openings without modification. They're lightweight, UV-resistant, and finished to automotive standards. No drilling. No brackets. Just precision engineering that transforms your Defender's front end into something unmistakably premium. Whether you're speccing a 90 for weekend adventures or a 110 for serious expedition work, these grille covers signal that your Defender has been properly sorted. They're the kind of detail that catches light, catches eyes, and tells a story about the owner's commitment to craftsmanship. What's Included 📦 Real Carbon Fibre Grille Covers Complete set for your model 📋 Installation Guide Clear, step-by-step instructions 🛡️ Mounting Hardware All clips and fixings included ✅ 30-Day Money-Back Guarantee Backed by Victorious Automotive Product Highlights Authentic woven carbon fibre construction Direct fit – no drilling or fabrication required Lightweight and structurally rigid UV-resistant finish for long-term durability Compatible with Defender 90, 110, and 130 L663 Precision-engineered for factory-quality tolerances Enhances front-end presence and kerb appeal Easy installation in under 30 minutes Maintains OEM grille proportions and symmetry Backed by Victorious 30-day guarantee Compatibility Model Year Range Compatibility Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2020–2026 Direct Fit Defender 110 Heritage (classic) 2014–2016 Not Compatible Range Rover Sport / Velar All years Not Compatible Installation Difficulty Level: Beginner | Time: 20–30 minutes Prepare: Ensure your Defender is on level ground and engine is cool. Gather the included mounting hardware and grille covers. Inspect Fitment: Dry-fit each carbon cover against the corresponding grille opening to verify alignment and snap-fit tolerances. Clean Surfaces: Wipe down the grille frame and contact points with a microfibre cloth to remove dust and debris. Install Clips: Attach the provided mounting clips to the rear edge of each carbon cover, ensuring they're flush and secure. Position Covers: Carefully guide each cover into its opening, starting from the top. Press firmly until clips engage and you hear/feel a click. Verify Alignment: Check that all covers sit flush with the bumper frame and are symmetrical. Make micro-adjustments as needed. Final Check: Step back and inspect the overall appearance. Test light pressure on each cover to confirm they're locked in place. Note: These are direct-fit components. If your Defender has an aftermarket bumper or non-standard grille frame, test-fit before committing. Contact us at +44 203 943 9919 if you need clarification on compatibility. Ready to Elevate Your Defender? Real carbon fibre grille covers are the finishing touch that transforms a standard Defender into a properly sorted, thoughtfully specified machine. Order now and experience the difference premium materials make. Shop Defender Upgrades Use code 22GET20 for 20% off when you buy any 2 items. 4.9/5 stars · 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee ☎ +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover Limited. All product names, logos, and vehicle designations are trademarks of their respective owners used solely for identification and compatibility purposes.

Victorious · Defender L663 · Exterior Real Carbon Fibre Taillight Protection Panel – Defender 90/110/130 OEM-style carbon fibre protection for your Defender's rear lights, engineered for direct fit and lasting durability. Defender 90/110/130 2020–2025 Real Carbon Fibre Direct Fit ISO9001 Certified Easy Install Overview The new Defender 90, 110, and 130 (2020–2025) have set a benchmark for modern utility design. Yet the rear lights remain one of the most vulnerable areas during off-road work and everyday wear. This Real Carbon Fibre Taillight Protection Panel adds both structural safeguard and a purposeful, refined aesthetic that complements your Defender's contemporary lines. Constructed from genuine woven carbon fibre, this panel delivers authentic material quality and visual depth you won't find in plastic alternatives. Whether you're navigating tight trails or highway driving, the panel shields your light assemblies from stone chips, debris, and minor impact—while maintaining perfect optical clarity for safe operation. Pre-fitted with premium automotive-grade adhesive, installation takes under 10 minutes and requires no drilling, cutting, or permanent modification to your vehicle. Every panel is ISO9001 certified and undergoes rigorous quality control before shipment worldwide. What's Included ⬚ Real Carbon Fibre Panel Genuine woven material, genuine weight 🧴 Pre-Applied Adhesive Premium automotive-grade, repositionable 📋 Installation Guide Step-by-step instructions in 5 languages ✓ Quality Guarantee 30-day money-back guarantee, 12-month warranty Product Highlights Genuine 3K twill-weave carbon fibre construction Protects OEM taillight assembly from stone chips and debris Direct fit – no cutting, drilling, or modification required ISO9001 certified manufacturing facility Pre-applied premium automotive adhesive Clear optical properties – no light obstruction Lightweight – adds negligible weight penalty Fits Defender 90, 110, and 130 models (2020–2025) Easy repositioning during first install (72-hour cure) Backed by Victorious 30-day money-back guarantee Compatibility Model Year Range Fit Status Defender 90 2020–2025 Direct Fit Defender 110 2020–2025 Direct Fit Defender 130 2020–2025 Direct Fit Defender 90 (2004–2016) Pre-2020 Not Compatible Range Rover / Sport / Evoque All years Not Compatible Note: Please confirm your vehicle's build year and taillight design before purchase. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure about fit. Installation Difficulty Level: Beginner | Time Required: 10 Minutes Prepare the surface. Clean the taillight area thoroughly with soap and water. Dry completely with a clean cloth or compressed air. Remove any residue, wax, or protective film. Test fit first. Position the carbon fibre panel over the taillight without removing the backing. Ensure alignment and centering. Adjust if needed before committing adhesive. Apply the panel. Carefully peel back a small corner of the adhesive backing. Press the panel into position, then gradually remove the rest of the backing while pressing firmly. Press firmly for 2+ minutes. Apply sustained pressure across the entire panel, especially along the edges. Use a squeegee or plastic card if available to eliminate air pockets. Allow full cure before exposure. Do not wash, touch, or expose to water for a minimum of 72 hours. If weather is cold, gently apply heat from a hair dryer to aid adhesive flow. Final inspection. After 72 hours, inspect the edges and seams. The panel should sit flush and show no lifting or gaps. ⚠ Important: The adhesive requires 72 hours to fully set in normal conditions (15–25°C). Exposure to water, humidity, or cold temperatures during this period may compromise bonding. If installation occurs in wet or cold weather, extend cure time to 120 hours and use gentle heat to accelerate resin flow. Ready to Protect Your Defender? Genuine carbon fibre meets precision engineering. This taillight panel isn't just a cosmetic upgrade—it's an investment in long-term protection and authentic material quality. Shop All Defender Exterior Upgrades Add 2 items and save 20% instantly: Code: 22GET20 4.9 / 5 Stars 12,300+ verified reviews 30-Day Money Back No questions asked Worldwide Shipping DHL, FedEx, UPS, TNT UK Support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any official Land Rover entity. All vehicle names and brands are the property of their respective manufacturers. Product fitment and compatibility are provided as a guide; buyers are responsible for confirming fit with their vehicle before purchase.

Victorious · Defender L663 · Exterior Styling Fog Lamp Cover For Land Rover Defender 90, 110, 130 Premium ABS rear fog light covers with integrated styling and seamless installation via dual-adhesive backing. Defender L663 2020–2025 ABS Material Matte Black Direct Fit No Drilling Overview If you own a Defender 90, 110, or 130 from 2020 onwards, you know that subtle exterior refinements make all the difference. The factory fog lamp surrounds are functional but uninspired. These premium ABS rear fog lamp covers deliver a purposeful, modern aesthetic—reshaping the rear end profile with a sleek matte-black finish that reads intentional and cohesive. Engineered from high-grade ABS plastic, these covers are injection-molded for precise fitment and dimensional accuracy. The matte finish resists gloss fade and minor scratching better than painted alternatives, while the dual-adhesive backing eliminates the need for fasteners, clips, or drilling. Installation takes minutes and leaves zero permanent modification to your Defender. Whether you're building a stealth aesthetic or simply upgrading from basic plastic trim, these fog lamp covers integrate seamlessly with modern and classic Defender styling packages. Tried-and-tested by thousands of L663 owners, they've been exported globally and manufactured to ISO 9001 standards—the same benchmark used across the automotive accessory industry. What's Included 🛡️ ABS Rear Fog Lamp Covers (Pair) Matte black finish, precision-molded 🔗 3M Dual-Adhesive Backing Pre-applied and ready to install 📋 Installation Guide Step-by-step fitment instructions ✅ QC Certified 100% brand new, inspected before shipment Product Highlights Premium ABS material – UV-resistant, scratch-resistant matte finish Direct fit for Defender 90, 110, 130 (2020–2025) No drilling, no fasteners, no modifications required 3M dual-adhesive backing for permanent, clean installation ISO 9001 manufactured – global automotive standard Precision injection-molded for exact fitment Lightweight and integrated design Enhances rear end aesthetic and visual cohesion Easy cleaning and maintenance 30-day money-back guarantee from Victorious Compatibility Defender Model Year Range Fitment Defender 90 (L663) 2020–2025 Direct Fit Defender 110 (L663) 2020–2025 Direct Fit Defender 130 (L663) 2020–2025 Direct Fit Defender (2004–2016) Pre-2020 Not Compatible Installation Difficulty: Beginner | Time: 5–10 Minutes Prepare the surface: Clean the rear fog lamp surround area thoroughly with soap and water. Ensure no dust, dirt, or residue remains. Dry completely with a microfiber cloth. Inspect fitment: Lay the covers in place (without adhesive) to verify alignment and gap consistency on both sides. Remove adhesive backing: Slowly peel away the 3M backing paper, exposing the adhesive strip. Apply with pressure: Press the cover firmly onto the fuel door, working from the center outward to eliminate air pockets. Apply steady pressure for 30 seconds per cover. Cure time: Wait a minimum of 48 hours before washing your Defender or exposing the covers to water or high humidity. This allows the adhesive to fully bond. Important: Do not wash your Defender for at least 48 hours after installation. Premature water exposure may compromise adhesive bond strength. Ready to Elevate Your Defender's Rear End? These fog lamp covers are a no-fuss, high-impact upgrade that transforms the rear aesthetic of your L663 in under 10 minutes. Premium materials, precision engineering, and a 30-day guarantee—everything you expect from Victorious. Shop Defender Upgrades Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) ✅ 30-day money-back guarantee Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Land Rover, or any JLR entity. All vehicle names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory and is designed for fitment compatibility only. ```

Victorious · Defender L663 · Exterior Protection Rear Brake Light Protective Net Cover – Defender 90 & 110 Premium ABS protection for your tail lights. Guard against impacts, dust, and debris with a direct-fit glossy black finish. Defender 90 L663 Defender 110 L663 2020–2025 Glossy Black ABS Polymer Direct Fit Why Your Defender Needs Rear Light Protection Your Land Rover Defender 90 and 110 spend their lives working—whether towing, off-road touring, or daily drive. Your rear brake lights face constant exposure: flying stones, mud spray, towing contact, and UV degradation. This protective net cover shields those expensive OEM lights while maintaining stock aesthetics. These glossy black ABS guards are engineered for durability and form-fitted for your 2020–2025 Defender L663. They arrive pre-assembled and ready for installation with adhesive backing. No cutting, no drilling, no permanent modifications to your vehicle. Victorious sources only ISO 9001–certified components. Each cover undergoes quality inspection before dispatch, and we back every order with a 30-day money-back guarantee. Built for owners who treat their Defenders as companions, not commodities. What's Included 🛡️ Rear Light Cover Set One pair, glossy black ABS. Left & right fitted. 🔧 Installation Hardware Pre-assembled. Double-sided adhesive tape backing. 📦 Retail Packaging Arrives safely boxed. Import-ready for resale. 📋 Fitment Guide Vehicle-specific installation notes included. Product Highlights Direct fit for Defender 90 & 110 (L663, 2020–2025) Premium ISO 9001–certified ABS construction Glossy black finish matches modern Defender aesthetics Protective mesh guards against impact and debris Pre-installed double-sided adhesive tape No drilling or permanent modifications required UV-resistant polymer compound Factory-sealed and ready to install Lightweight (minimal vehicle impact) Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Code Years Fitment Defender 90 L663 2020–2025 Direct Fit Defender 110 L663 2020–2025 Direct Fit Defender 130 L663 2021–2025 Check Fitment Classic Defender Pre-2020 2004–2016 Not Compatible Installation Guide Difficulty: Beginner | Time: 15–20 minutes Clean the surface: Wipe the rear light housing and surrounding body panel with a lint-free cloth. Use isopropyl alcohol to remove any dust, grease, or residue. Position the cover: Dry-fit the protective net cover to your rear light. Ensure alignment with the light perimeter and body contours. Peel and apply: Remove the backing from the double-sided adhesive tape. Press firmly onto the light housing, working from top to bottom to avoid air pockets. Cure time: Allow 24 hours for the adhesive to cure fully before washing or driving aggressively. Inspect: Check all edges for secure contact. If any area lifts, re-press and allow additional cure time. ⚠️ Fitment Check: Before installation, verify that the cover matches the contour of your specific Defender model (90 vs. 110). Consult the provided fitment guide or contact us at +44 203 943 9919 if unsure. Ready to Protect Your Defender's Tail Lights? Order now and secure your rear light covers with Victorious Automotive's industry-leading guarantee. Free worldwide shipping on orders over £50. Use code 22GET20 for 20% off when you buy any 2 items. Shop Defender Accessories 30-Day Money BackNo questions asked Worldwide ShippingDHL, FedEx, UPS, TNT 4.9★ Rating12,300+ verified reviews Expert Support+44 203 943 9919 Victorious Automotive is an independent aftermarket parts supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All trademarks and vehicle names are property of their respective owners. Product specifications subject to change without notice. Always verify fitment with your vehicle's build and year before purchase.

Victorious · Defender L663 · Lighting 2026 Style LED Tail Lights for Defender L663 Modern LED rear lighting with integrated brake, turn signal, and reverse functions for your Defender. L663 2020–2026 LED Technology OEM-Style Fitment Plug-and-Play Overview The Defender L663 is built for serious terrain and serious style. Your rear lighting should match that capability—and these LED tail lamps deliver the performance and modern aesthetic your Defender deserves. Engineered with premium LED technology, these tail lights offer superior luminous intensity, faster response times, and reliability that outlasts traditional halogen assemblies. The integrated design combines brake light, high-mounted stop light, turn signals, and reverse light into one cohesive unit—keeping your Defender looking contemporary while improving visibility and safety on and off the road. Built to withstand vibration, shock, and the extremes of adventure. Maintenance-free, low-energy consumption, and engineered for longevity. This is how modern Defender lighting should work. What's Included 💡 LED Tail Light Assembly (Pair) 2026 new design, direct fitment L663 🔧 Mounting Hardware Stainless fasteners, gaskets included 📋 Installation Guide Step-by-step with wiring diagram ✓ Lifetime Support Contact our team via +44 203 943 9919 Key Features Premium LED light source with optimised intensity distribution Integrated brake, turn signal, reverse, and high-mount stop light Rapid illumination rise—millisecond response time Extended service life—maintenance-free operation Low energy consumption vs. traditional halogen High durability switch mechanism rated for 100,000+ cycles Exceptional vibration and shock resistance Weather-sealed design with gasket protection 2026 contemporary styling for modern Defender aesthetic Direct OEM-style fitment—no modification required Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender L663 2020–2026 Direct Fit Land Rover Defender 110 2020–2026 Direct Fit Land Rover Defender 90 2020–2026 Direct Fit Land Rover Defender 130 2020–2026 Direct Fit Range Rover Sport L461 / L494 Any Not Compatible Range Rover Vogue L460 / L405 Any Not Compatible Installation Difficulty: Intermediate | Time: 45–60 minutes Disconnect the vehicle battery at the negative terminal. Remove existing tail light assembly by unscrewing mounting bolts (typically 4–6 bolts per side). Disconnect the wiring harness from the OEM assembly. Note connector positions for reference. Connect the new LED assembly harness to the vehicle connectors. Match colour-coded wires: red (brake/stop), amber (turn), white (reverse), black (ground). Align the new assembly with the mounting bracket and secure with provided stainless hardware. Check gasket seating to prevent water ingress. Apply silicone sealant around the perimeter if needed. Reconnect the battery and test all light functions (brake, turn, reverse, high-mount stop) before closing the tailgate. Allow any applied sealant 24 hours to cure before off-road use. ⚠ Important: Do not force connectors. If resistance is felt, verify connector alignment. Incorrect wiring may damage the LED module or vehicle electronics. When in doubt, consult a qualified Land Rover technician or contact our team. Upgrade Your Defender Lighting Today Modern technology, purpose-built reliability, and a look that matches your Defender's attitude. These LED tail lights transform your rear end into a beacon of contemporary style and safety. Shop Defender L663 Lighting Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Phone support +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective owners. Product specifications subject to change without notice. Always verify fitment with your vehicle VIN before purchase. ```

Victorious · Defender L663 · Wheels & Tyres 20" Forged Alloy Wheel 9J – Defender L663 Premium forged construction with precision 5×120 PCD fitment. Lightweight, responsive handling, and a refined finish designed for the modern Defender. Defender L663 2020–2026 Forged Alloy 20" Diameter 9J Width PCD 5×120 ET38 Offset CB 72.6mm Overview The New Land Rover Defender L663 (2020–2026) demands wheels that balance rugged capability with contemporary design. This 20-inch forged alloy wheel delivers both—engineered with a centre bore of 72.6mm and a precise ET38 offset that sits flush with your Defender's geometry. Forged construction means greater strength-to-weight ratio than cast alternatives. Your wheel absorbs impacts better, transfers steering inputs more directly, and reduces unsprung mass for improved suspension response and fuel efficiency. The 9J width provides a confident stance while maintaining clearance for brake systems and suspension articulation. Ideal for owners who refuse to compromise between aesthetics and function, these wheels transform your Defender's appearance whilst genuinely improving how it drives—smoother ride quality, sharper turn-in, and reduced tyre wear over time. What's Included ⚙️ Forged Alloy Wheel 20" × 9J, precision-cast 🔩 Mounting Hardware Stainless steel lug bolts 📋 Fitment Guide Technical specs & torque values 🛡️ Victorious Guarantee 30-day money-back promise Product Highlights Forged alloy construction for superior strength and reduced weight 5×120 PCD fitment matches Defender L663 bolt pattern exactly ET38 offset maintains correct track geometry and brake clearance 72.6mm centre bore ensures zero vibration and perfect centering 20-inch diameter fits standard Defender tyre profiles without modification 9J width provides aggressive stance without rubbing or clearance issues Lightweight design improves acceleration, braking, and fuel economy Enhanced steering response and handling precision on and off-road Modern aesthetic complements Defender's contemporary design language Backed by Victorious 30-day money-back guarantee and expert support Compatibility Vehicle Model Years Code Fitment Land Rover Defender 2020–2026 L663 Direct Fit Land Rover Defender 2004–2016 Pre-L663 Not Compatible Range Rover Sport All Years L494/L461 Not Compatible Range Rover Vogue All Years L405/L460 Not Compatible Installation Notes Difficulty Level: Moderate | Time: 45–60 minutes (per wheel) Secure your Defender on level ground using axle stands and wheel chocks Remove the existing wheel using a cross-pattern loosening technique Clean the hub face and inspect the brake system for wear Position the new forged wheel, ensuring the centre bore aligns with the hub Install lug bolts by hand first, then tighten in a star pattern to 110 Nm Double-check all bolts after 10 minutes of light driving Perform a visual wheel alignment and balance check at a trusted tyre specialist Important: Wheel fitment on the Defender L663 requires precision. If you're unsure about centre bore clearance or offset compatibility, consult a Land Rover specialist before installation. Incorrect fitment can affect braking performance and suspension geometry. Ready to Upgrade Your Defender? These forged 20-inch wheels aren't just a visual refresh—they're a genuine performance upgrade that transforms how your L663 handles, accelerates, and brakes. Precision engineering. Responsive driving. Timeless design. Shop Defender Wheels Use code 22GET20 to get 20% off any 2 items from our Defender collection. ✓ 4.9★ Rated – 12,300+ Reviews ✓ 30-Day Guarantee – Money Back ✓ Worldwide Shipping – DHL, FedEx, UPS ✓ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names and vehicle codes are used for identification purposes only. Always verify fitment with technical specifications before purchase.

Victorious · Defender L663 · Exterior Air Intake Grille for Defender 90 & 110 (2020–2026) Premium aluminium insect mesh screen keeps debris and flying insects out of your engine bay while maintaining clean aesthetics. Defender L663 2020–2026 Aluminium Alloy Black Finish Insect Proof Anti-Blocking Overview The 2020-onwards Defender 90 and 110 are serious workhorses, designed to tackle any terrain. Whether you're navigating country lanes or exploring more remote environments, engine protection matters—and this air intake grille is engineered exactly for that. This aftermarket air intake mesh is machined from high-grade aluminium alloy in a satin black finish that complements modern Defender aesthetics. Its fine mesh construction blocks insects, debris, and road spray from entering your engine's intake while maintaining optimal airflow. No performance compromise, no weight penalty—just straightforward protection. Installation is straightforward, taking 15–20 minutes without tools. Whether you're a weekend adventurer or daily commuter, this upgrade pays for itself in peace of mind. What's Included 📦 Air Intake Grille Aluminium alloy, black finish 🔧 Installation Guide Step-by-step instructions included ✓ Factory Tested ISO9001 certified manufacturing Product Highlights High-grade aluminium alloy construction for durability and corrosion resistance Fine mesh design blocks insects and debris without restricting airflow Satin black finish integrates seamlessly with modern Defender design Direct-fit design—no modifications required to your vehicle Tool-free installation in under 20 minutes Anti-blocking mesh prevents clogging during off-road use Lightweight—no impact on fuel economy or performance ISO9001 certified manufacturing and quality control Protects engine bay during towing, dust storms, and highway driving Covers both Defender 90 and 110 models seamlessly Compatibility Vehicle Model Year Range Compatibility Land Rover Defender 90 2020–2026 Direct Fit Land Rover Defender 110 2020–2026 Direct Fit Land Rover Defender 130 2020–2026 Direct Fit Defender 90 (Pre-2020) –2019 Not Compatible Defender 110 (Pre-2020) –2019 Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Open your bonnet and locate the air intake area on your Defender's front fender. Align the air intake grille mesh with your vehicle's existing intake port. Secure the grille using the provided clips or adhesive backing (method depends on your model year). Press firmly to ensure a seated fit and allow adhesive to set for 24 hours if applicable. Close your bonnet and verify the grille is secure. No further adjustments needed. Note: Always ensure your engine is cool before installation. If you're uncomfortable with any step, contact our support team at +44 203 943 9919. Ready to Protect Your Defender? Shop with Confidence Over 12,300 verified five-star reviews from Land Rover and Defender owners. 30-day money-back guarantee on every order. Worldwide shipping via DHL, FedEx, UPS, and TNT. Shop Defender Accessories Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars ✓ 12,300+ Reviews ✓ 30-Day Guarantee ✓ Worldwide Shipping Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names and trademarks are the property of their respective owners. This product is designed as an aftermarket enhancement and does not constitute a factory modification. Always verify compatibility with your specific vehicle before purchase. ```