Victorious Automotive · Range Rover Sport L320 · Fog Lamp Covers
Primed Front Fog Lamp Hood Covers – Range Rover Sport L320 (2005–2009) | Left & Right Pair
OE-matched primed PP fog light bezels for the first-generation Range Rover Sport — precision-moulded to restore factory fitment and front-end protection on your L320.
Range Rover Sport L320
2005–2009
Part No. DXB000221LML
Part No. DXB000231LML
Primed PP Plastic
Direct Fit
Left & Right
New Condition
RALUX
Overview
The first-generation Range Rover Sport (L320, 2005–2009) established itself as one of the most dynamic and desirable SUVs of its era — a vehicle that rewarded owners who took pride in keeping every detail exactly right. The front fog lamp bezels sit prominently in the lower bumper and are among the first components to show the wear of road use, stone chips, or minor parking incidents. A cracked, discoloured, or missing fog lamp hood immediately undermines the Sport's composed, purposeful stance.
These replacement fog lamp hood covers — part numbers DXB000221LML (right) and DXB000231LML (left) — are precision-moulded from high-density polypropylene (PP) to replicate the exact geometry of the original OE units. Supplied in a paint-ready primed finish, they accept standard automotive body paint directly, allowing you to blend them seamlessly with your existing bumper colour for a factory-quality result.
Offered as a left and right set, this listing ensures your Sport gets a symmetrical, matched restoration in a single order. Whether you're addressing accident damage, UV degradation, or simply refreshing an ageing front end, these bezels deliver the kind of precise fit and finish that a vehicle of this calibre demands — without the dealership price tag.
What's Included
🔦
Right Fog Lamp Hood
Part No. DXB000221LML — driver-side bezel, primed finish
🔦
Left Fog Lamp Hood
Part No. DXB000231LML — passenger-side bezel, primed finish
📋
Fitment Reference
Vehicle application guide included with shipment
Product Highlights
- Precision-moulded PP construction mirrors OE part geometry exactly
- Paint-ready primed surface — compatible with all standard automotive body paints
- Complete left and right pair for a fully matched front-end restoration
- New condition — not refurbished or reconditioned
- Designed specifically for Range Rover Sport L320 lower bumper apertures
- Lightweight at 0.5 kg — no impact on vehicle dynamics or front-end balance
- Fog light protection function retained — correctly houses and shields fog lamp assembly
- Direct OE replacement — no cutting, drilling, or modification required
- Dimensions: approx. 13" (L) × 12" (W) × 12" (H) — matches original bumper recess profile
- Supplied by RALUX, a trusted supplier of Land Rover body restoration components
Compatibility
| Vehicle |
Code |
Year Range |
Fitment |
| Range Rover Sport |
L320 |
2005–2009 |
Direct Fit |
| Range Rover Sport |
L494 |
2013–2020 |
Not Compatible |
| Range Rover Sport |
L461 |
2022–2026 |
Not Compatible |
| Range Rover Vogue |
L322 |
2002–2012 |
Not Compatible |
| Range Rover Vogue |
L405 |
2013–2020 |
Not Compatible |
| Range Rover Velar |
L560 |
2018–2022 |
Not Compatible |
| Defender |
L663 |
2020–2026 |
Not Compatible |
Installation Notes
Difficulty: ⭐⭐☆☆☆ | Estimated Time: 30–60 minutes | Professional paint recommended
- Before fitting, prepare the primed surface by lightly sanding with 400-grit wet-and-dry paper to ensure a smooth, even base for paint adhesion.
- Apply a compatible automotive primer sealer coat if required by your chosen topcoat system, then paint to match your bumper colour. Allow full cure time per paint manufacturer's instructions before handling.
- With the vehicle on a flat surface, carefully remove the front bumper lower trim or access panel to reach the existing fog lamp bezel mounting points (refer to your workshop manual for L320-specific fastener locations).
- Unclip or unscrew the damaged fog lamp hood from the bumper aperture, disconnecting any retaining tabs carefully to avoid cracking the surrounding bumper material.
- Align the new fog lamp hood into the bumper aperture, ensuring all locating tabs and clip positions are correctly seated before applying pressure to secure.
- Refit any removed trim panels and fasteners. Verify the fog lamp lens is correctly seated and fully protected within the new bezel before completing reassembly.
⚠ Note: These covers are supplied primed and unpainted. Professional painting prior to fitting is strongly recommended to achieve a factory-quality finish. Ensure paint is fully cured before installation to prevent damage to the new surface during handling.
Restore Your Sport's Front End — The Right Way
At Victorious Automotive, we stock the parts that Range Rover owners actually need — precisely specced, properly described, and dispatched worldwide. Your L320 deserves better than a poorly fitting aftermarket part.
Shop Range Rover Sport Parts
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
🌍 Worldwide shipping via DHL, FedEx, UPS & TNT
↩ 30-day money-back guarantee
📞 +44 203 943 9919 Mon–Fri, 9am–7pm
Victorious Automotive is an independent aftermarket retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Part numbers are cited for reference only.
