Victorious Automotive · Discovery 3 / Discovery 4 / Range Rover Sport · Spare Tyre System
Spare Tyre Winch – LR024145 | Discovery 3, Discovery 4 & Range Rover Sport (Standard Version)
OEM-specification steel spare wheel winch for Land Rover Discovery 3, Discovery 4, and Range Rover Sport L320 — the reliable, direct-fit solution to lower and raise your spare tyre under the load floor without tools or complexity.
LR024145
LR010453
KTI000017
Discovery 3 · 2005–2009
Discovery 4 · 2010–2016
Range Rover Sport L320 · 2005–2013
Metal Construction
Standard (No Anti-Theft)
Direct OE Fit
Black Finish
Overview
The Land Rover Discovery 3, Discovery 4, and first-generation Range Rover Sport L320 all carry their spare tyre mounted beneath the rear load floor via a cable winch mechanism — a practical system that keeps the spare fully concealed and out of the way until it's needed. Over time, this winch assembly is subject to significant wear from weather exposure, corrosion, and regular use, and a failed or seized winch can leave you stranded on the side of the road unable to retrieve your spare at the worst possible moment.
This LR024145 spare tyre winch is the standard OE-specification replacement for all three platforms, manufactured to the same dimensions and material tolerances as the original Land Rover unit. The assembly utilises a robust steel construction finished in black, operating via the vehicle's existing cable and drop-rod mechanism to smoothly lower and raise the spare wheel carrier. This is the non-anti-theft variant — the earlier, simpler version designed for vehicles that did not leave the factory with the locking winch upgrade.
Whether you're rebuilding a high-mileage Discovery 3 or refreshing the underbody of a Range Rover Sport before a longer expedition, replacing an ageing winch mechanism is a straightforward job that restores peace of mind and ensures your spare is always accessible when you need it most. Cross-references LR010453 and KTI000017 for easy identification across supplier catalogues.
What's Included
🔩
Spare Tyre Winch Assembly
Complete OE-spec unit, ready to fit
🪝
Winch Cable & Hook Mechanism
Pre-assembled steel cable retaining system
🧱
Mounting Bracket
Direct bolt-on fitment to OE mounting points
📄
Product Reference Sheet
Part numbers and fitment reference included
Product Highlights
- OEM part number LR024145 — direct Land Rover fitment reference
- Also cross-references LR010453 and KTI000017
- Full metal construction for durability and load-bearing integrity
- Black finish to resist corrosion in underbody conditions
- Standard (non-anti-theft) version — matches early factory specification
- Direct bolt-on replacement — no modification required
- Compatible with Discovery 3, Discovery 4 and Range Rover Sport L320
- Operates with existing drop-rod and cable retrieval system
- Restores full spare tyre lowering and raising functionality
- Competitively priced alternative to main dealer pricing
Compatibility
| Vehicle |
Code |
Years |
Fitment |
| Land Rover Discovery 3 |
L319 |
2005–2009 |
Direct Fit |
| Land Rover Discovery 4 |
L319 |
2010–2016 |
Direct Fit |
| Range Rover Sport (1st Gen) |
L320 |
2005–2009 |
Direct Fit |
| Range Rover Sport (1st Gen) |
L320 |
2010–2013 |
Direct Fit |
| Range Rover Sport (2nd Gen) |
L494 |
2013–2020 |
Not Compatible |
| Range Rover Vogue L405 |
L405 |
2013–2020 |
Not Compatible |
| Land Rover Discovery 5 |
L462 |
2017–2024 |
Not Compatible |
| Land Rover Defender (New) |
L663 |
2020–2026 |
Not Compatible |
⚠️ This is the standard non-anti-theft version. If your vehicle was fitted with a locking spare tyre winch from the factory, please verify your requirement before ordering. Anti-theft variants carry a different part number.
Installation Notes
Difficulty: Moderate · Estimated Time: 30–60 Minutes · Tools Required: Basic Hand Tools
- Open the rear tailgate and remove the load floor panel to access the spare tyre winch housing in the lower boot area.
- Using the vehicle's drop rod, fully lower the existing spare tyre and remove it from the carrier hook beneath the vehicle.
- Disconnect the winch cable from the carrier cradle and unclip any retaining hardware securing the cable to the chassis.
- Remove the winch assembly mounting bolts (typically two to three fasteners) and withdraw the old winch unit from its housing.
- Offer the new LR024145 winch into position, align with the OE mounting points, and torque the bolts to specification.
- Thread the new winch cable through the floor guide, attach the spare carrier, and test lowering and raising function before refitting the spare tyre.
- Refit the spare tyre securely, retest the winch operation, and reinstall the load floor panel.
⚠️ Note: Ensure the spare tyre is fully seated and locked in the raised position before driving. Do not operate the vehicle if the winch does not hold the spare securely at full height. If in doubt, have the installation inspected by a qualified technician.
Shop by Vehicle
Trusted by Land Rover Owners Worldwide
Victorious Automotive supplies OEM-quality Land Rover parts and accessories to enthusiasts across more than 50 countries. Every order is backed by our 30-day money-back guarantee and dispatched via DHL, FedEx, UPS, or TNT.
Shop Discovery 3 Parts
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
📦 Worldwide Shipping via DHL / FedEx / UPS
↩️ 30-Day Money-Back Guarantee
📞 +44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or authorised by Jaguar Land Rover Limited or any of its subsidiaries. Land Rover, Discovery, Range Rover, and Defender are registered trademarks of Jaguar Land Rover Limited. Part numbers are referenced for fitment identification purposes only. Always verify compatibility with your specific vehicle before ordering.
