3.0L V6 5.0L V8 Engine Water Pump for Discovery LR4 Range Rover Sport Jaguar XF XJ XE XK XJR XFR XKR C2D20660 LR033993 LR097165
£ 298.99
```html
Victorious · Land Rover & Jaguar · Cooling System
Engine Water Pump 3.0L V6 / 5.0L V8 for Discovery LR4 & Range Rover Sport
OE-spec replacement pump with integrated gasket—critical cooling system component for 2010–2017 Land Rover and Jaguar models.
Discovery LR4
Range Rover Sport L494
Jaguar XF / XJ / XK / XJR / XFR / XKR
3.0L V6 / 5.0L V8
2010–2017
Gasket Included
Overview
The engine water pump is the heart of your vehicle's cooling system. For Discovery LR4, Range Rover Sport, and select Jaguar models, this OE-specification pump circulates coolant through the engine block, heads, and radiator under extreme heat and pressure. Over time—especially in high-mileage or performance-driven vehicles—bearing wear, seal degradation, and impeller erosion cause coolant leaks, overheating, and catastrophic engine damage.
This direct-replacement pump restores full cooling performance using OEM engineering standards. It features a precision-machined aluminum body, integrated gasket to eliminate common leak points, and a sealed bearing assembly rated for the thermal cycling and pressure demands of modern TDV6 and V8 powerplants.
Whether you're managing preventive maintenance, recovering from a thermal failure, or refreshing an aging cooling circuit, this pump delivers reliability you can trust.
What's Included
🔧
Water Pump Assembly
Precision-engineered with OE tolerances
✓
Integrated Gasket
Factory-sealed, leak-proof joint
📋
Installation Guide
Torque specs & sequence included
📦
Premium Packaging
Protected for safe worldwide shipping
Product Highlights
OEM-equivalent engineering & materials—direct bolt-in replacement
Sealed roller bearing assembly rated for continuous high-temperature duty
Corrosion-resistant aluminum casting with precision tolerances
Integrated gasket eliminates separate sealing steps and potential leak paths
Compatible with OE coolant type (do not mix; follow manufacturer spec)
12-month warranty against manufacturing defects
Fits 3.0L V6 TDV6 and 5.0L V8 Supercharged engines
Drop-in replacement—no modifications required
Thermal cycling tested to 120°C continuous operation
Pressure-rated to 2.0 bar (29 psi) standard circuit load
Compatibility Matrix
Vehicle Model
Years
Engine
Fit
Discovery LR4
2010–2016
3.0L V6 TDV6 / 5.0L V8
Direct Fit
Range Rover Sport L494
2010–2017
3.0L V6 TDV6 / 5.0L V8
Direct Fit
Range Rover Vogue L405
2010–2017
3.0L V6 TDV6 / 5.0L V8
Direct Fit
Jaguar XF
2010–2017
3.0L V6 / 5.0L V8
Direct Fit
Jaguar XJ / XJR
2010–2017
3.0L V6 / 5.0L V8
Direct Fit
Jaguar XK / XKR / XKR-S
2010–2015
5.0L V8
Direct Fit
Jaguar F-Type / F-Type R
2014–2017
3.0L V6 / 5.0L V8
Direct Fit
OE Cross-Reference Numbers: LR010801 · LR033993 · LR073711 · LR097165 · C2Z31587 · C2Z31146 · C2D20660
Installation Notes
Difficulty: Intermediate | Time: 1.5–2.5 hours
Disconnect battery negative terminal and allow engine to cool to room temperature.
Drain cooling system into a container. Dispose of old coolant responsibly.
Remove timing cover / serpentine belt as required by your model (refer to factory manual for sequence).
Unbolt old pump from timing case—typically 4–6 bolts. Mark bolt positions to confirm correct torque orientation.
Clean mating surface thoroughly with a gasket scraper. Remove all old gasket material and sealant residue.
Install new pump with integrated gasket face-down against timing case. Hand-thread bolts first to avoid cross-threading.
Torque to spec: Typically 25–30 Nm (18–22 ft-lbs) for smaller bolts. Consult your vehicle manual for exact sequence and final torque spec.
Reinstall timing cover, pulleys, and serpentine belt in reverse order. Tension belt to OE specification.
Refill cooling system with fresh OE coolant (e.g., Jaguar / Land Rover spec). Do not mix coolant types.
Bleed air pockets by running engine at idle with heater on full. Top up reservoir after thermal stabilization.
Test for leaks at the pump gasket joint and all hose connections before extended driving.
⚠ Important: This is a high-temperature, high-pressure component. Improper installation, over-torquing, or using incorrect coolant can result in leaks, overheating, and engine damage. If you're uncertain about any step, consult a qualified technician or your vehicle's official workshop manual.
Ready to Restore Cooling Performance?
Keep your Discovery, Range Rover, or Jaguar running at optimal temperature. This OE-spec pump is engineered for longevity and precision fit—backed by our 30-day money-back guarantee and 12-month warranty.
Add to Cart
Use code 22GET20 for 20% off when you buy any 2 items.
✓ 4.9/5 rating from 12,300+ verified buyers
✓ 30-day money-back guarantee
✓ 12-month warranty included
✓ Worldwide DHL/FedEx shipping
✓ Expert support: +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar, or JLR (Jaguar Land Rover Limited). Product names, logos, and brands are the property of their respective owners. This product is an aftermarket OE-equivalent component designed for compatibility. Always verify fitment with your vehicle's VIN before purchase. Installation should be performed by a qualified technician in accordance with manufacturer specifications.
```
ENGINE BLOCK TO HEATER WATER HOSE FOR LAND ROVER RANGE ROVER 2013- RANGE ROVER SPORT 2014- NEW DISCOVERY 2017- LR034616 LR034624
from £ 74.75
```html
Victorious Automotive · Range Rover & Discovery · Cooling System
Engine Block to Heater Water Hose – L405 | L494 | L462
Premium OE-spec replacement hose engineered to restore efficient coolant flow and maintain optimal engine temperature across all modern petrol platforms.
Range Rover L405 2013+
Range Rover Sport L494 2014+
Discovery V L462 2017+
OEM LR034616 | LR034624
Premium Rubber & Steel
Petrol V6 & V8
Overview
The engine block to heater inlet hose is a critical coolant passage that prevents overheating and maintains thermal stability across Range Rover Vogue, Range Rover Sport, and Discovery 5 platforms. Over time, OEM rubber hoses degrade from constant temperature cycling, pressure stress, and age—leading to coolant leaks, inefficient cabin heating, and potential engine damage.
This Partsmost aftermarket replacement is engineered to OEM specifications and matches the exact fitment of your original equipment. Whether you're replacing a weeping hose before it fails or restoring a vehicle with compromised cooling performance, this hose restores reliability and peace of mind.
Each hose is manufactured to withstand the full temperature and pressure envelope of your engine—from cold morning starts to extended highway cruising—with superior durability and chemical resistance.
What's Included
🔧
Engine Block Heater Hose
LR034616 or LR034624 variant
Product Highlights
OE-equivalent construction meets OEM cooling system pressure and temperature specs
Premium rubber compound resists coolant degradation and thermal stress
Direct fit—no modification or adapter kit required
Engineered for 3.0L SC V6, 5.0L SC V8, and 5.0L petrol engines
Superior bend radius prevents kinking and maintains consistent coolant velocity
Steel reinforcement layers ensure durability under sustained pressure cycles
Factory hose routing compatibility with original mounting brackets and clips
New condition—not reconditioned or refurbished stock
12-month manufacturer warranty from date of purchase
Backed by 30-day money-back guarantee from Victorious Automotive
Compatibility Matrix
Vehicle
Model Code
Years
Engine
Fitment
Range Rover Vogue
L405
2013–2020
3.0L SC V6 | 5.0L SC V8 | 5.0L Petrol
Direct Fit
Range Rover Sport
L494
2014–2020
3.0L SC V6 | 5.0L SC V8 | 5.0L Petrol
Direct Fit
Land Rover Discovery V
L462
2017+
3.0L SC V6 Petrol
Direct Fit
Range Rover Vogue New
L460
2022+
All petrol engines
Not Compatible
Range Rover Sport New
L461
2022+
All engines
Not Compatible
Installation & Service Notes
Difficulty: Intermediate | Time: 1.5–2 hours
Disconnect the negative battery terminal and allow the engine to cool for at least 30 minutes.
Locate the engine block heater inlet connection below the intake manifold (passenger side on V6 engines, driver side on V8 engines).
Place a drain pan beneath the hose connection. Loosen the hose clamp using a flathead screwdriver and gently twist the hose to break the seal.
Slide the old hose off the inlet stub. Inspect the stub for corrosion or damage; clean with a soft cloth if needed.
Position the new hose over the inlet and tighten the factory hose clamp firmly—do not over-tighten, as this can compress the reinforcement and restrict flow.
Route the hose along the same path as the original, using factory clips and tie-downs to prevent abrasion against hot engine surfaces or sharp edges.
Reconnect the negative battery terminal and refill the coolant reservoir to the full mark using OEM coolant only.
Start the engine and allow it to idle for 2–3 minutes, then inspect all connections for leaks before taking to operating temperature.
Warning: Never disturb cooling hoses on a hot engine. High-pressure coolant can cause severe burns. Allow a minimum 30-minute cool-down period before disconnecting any hose or opening the coolant reservoir.
Ready to Restore Cooling Efficiency?
Keep your Range Rover or Discovery running cool and leak-free with an OE-spec replacement hose from Victorious Automotive. Fast worldwide shipping and a 30-day money-back guarantee on every order.
Shop Engine Block Heater Hose Now
22GET20
Use code 22GET20 for 20% off any 2 items
✓ 4.9/5 from 12,300+ verified reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL, FedEx, UPS shipping
✓ Live support +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All vehicle names, badges, and model codes are used solely for compatibility reference. Product descriptions are for informational purposes only and do not imply endorsement by any manufacturer.
```
2.2 Diesel Car Engine Coolant Thermostat & Housing for LAND ROVER Freelander LR2 Evoque Discovery Sport Jaguar C2S44028 LR001312
from £ 104.98
```html
Victorious · Cooling System · Engine Components
2.2 Diesel Thermostat Housing – Land Rover Freelancer, Evoque, Discovery Sport & Jaguar
OE-equivalent 83°C thermostat assembly with integrated housing for precise engine temperature control on 2.2L diesel engines.
LR001312
C2S44028
2012–2015+
Diesel
Polypropylene Housing
Direct Fit
Overview
This is an OE-specification replacement thermostat and housing assembly engineered for Land Rover Freelander LR2, Range Rover Evoque, Discovery Sport, and Jaguar XF diesel models equipped with 2.2L single-turbo diesel engines. Engine temperature management is fundamental to fuel efficiency, emissions control, and longevity—a failing thermostat can trigger check-engine lights, poor idle quality, and radiator strain.
Built to original equipment specifications and manufactured to ISO quality standards, this assembly opens at 83°C (182°F)—the optimal threshold for your diesel powerplant's thermal management. The polypropylene housing resists corrosion and coolant degradation, and the precise bimetallic thermostat element maintains consistent flow without hysteresis or drift.
Fits as a direct replacement for part numbers LR001312, C2S44028, 9657182080, and 1427919. Installation is straightforward—typically 30–45 minutes with basic hand tools and no special diagnostic equipment required.
What's Included
🌡️
Thermostat Element
83°C bimetallic, OE-spec
🔧
Housing Assembly
Polypropylene, corrosion-resistant
📦
Gasket & Seals
Pre-installed, ready to fit
📋
Installation Guide
Step-by-step with torque specs
Product Highlights
OE-Equivalent Specification: Engineered to Land Rover and Jaguar factory tolerances and thermal characteristics.
83°C Opening Temperature: Optimized for 2.2L diesel thermal curves; prevents overcooling and excessive fan cycling.
Polypropylene Housing: Lightweight, corrosion-resistant, and compatible with all modern coolants including blue and pink G12+ fluids.
Integral Gasket & Seals: Eliminates mismatched seal problems; leak-free fitment on first installation.
Pre-Assembled & Tested: Ships ready to install; no internal setup required.
12-Month Warranty: Full manufacturer defect coverage; no pro-rata clauses.
Direct Fit, No Modifications: Drops in place of original; retains all OEM mounting bosses and coolant ports.
ISO & TS16949 Quality: Manufactured to automotive industry quality standards in certified facilities.
Cross-Compatible Part Numbers: Works with LR001312, C2S44028, 9657182080, and 1427919 part numbers.
Rapid Thermal Response: Minimal hysteresis ensures stable engine temperature even in stop-start urban driving.
Compatibility Matrix
Vehicle & Model Year
Engine Code
Fit Status
Land Rover Freelander LR2 (2006–2015)
2.2L Diesel
Direct Fit
Range Rover Evoque (2012–2020)
2.2L Diesel SD4
Direct Fit
Land Rover Discovery Sport (2015+)
2.2L Diesel
Direct Fit
Jaguar XF (2009–2015)
2.2L Diesel
Direct Fit
Range Rover Sport (2013–2020)
2.2L Diesel SD4
Direct Fit
Petrol / Gasoline Variants
Any non-diesel
Not Compatible
Installation Notes
Difficulty: Intermediate | Time: 30–45 Minutes
Cool the engine: Allow the vehicle to sit for at least 30 minutes after shutdown. Coolant system pressure can reach 20+ psi when warm—high-temperature scalding risk.
Remove coolant hose(s): Locate the thermostat housing on the engine block near the water pump or upper radiator hose junction. Disconnect hoses or unbolt the housing cap, depending on model year.
Drain excess coolant: A small amount will escape; position a drain pan underneath to avoid spillage on engine bay components.
Remove old thermostat: Carefully lift out the old thermostat element and discard. Clean the housing bore of any debris, mineral buildup, or old gasket material using a soft brass brush or cloth.
Install new thermostat: Insert the new thermostat element with the spring side facing the engine block. The element should sit flush in the bore without forcing.
Reinstall housing: Position the housing cover or hose fitting and secure with the original bolts. Torque to 20–25 Nm (15–18 ft-lbs); do not over-tighten, as polypropylene can crack under excessive load.
Reconnect hoses: Reattach coolant hoses and tighten hose clamps to firm hand-tight plus 1/4 turn.
Refill coolant: Top up the expansion tank with coolant matching your vehicle's spec (typically Jaguar coolant or equivalent blue G12+ fluid for these engines). Fill to the "max" line with the engine cold.
Bleed air: Start the engine and allow it to idle for 2–3 minutes. You may hear burbling as air is expelled. Do not rev the engine immediately.
Monitor temperature gauge: Confirm the needle rises smoothly and stabilizes at mid-scale (around 90°C). The fan should cycle on briefly once the engine reaches operating temperature.
Check for leaks: After 5 minutes of idle, inspect the thermostat housing and hose connections for seepage. If a slow drip is present, stop the engine, allow cooling, and gently snug the clamp or bolt—do not force.
Test drive: Take a short drive and confirm the gauge remains stable; check for any coolant odor or steam. Let the engine cool completely before stopping to verify no thermal stress has occurred.
Important: Always dispose of old coolant responsibly—never pour into drains or soil. Ethylene glycol is toxic to aquatic life. Use a recycling facility or bring it to your local hazardous waste depot. Also, if your vehicle has been sitting unused, the cooling system may have corrosion or sediment; consider flushing the entire system before installation for optimal performance.
Why Choose This Thermostat?
Engine thermostats fail silently—cold engines consume more fuel, emit excess hydrocarbons, and strain the radiator. Hot engines overheat without warning, risking head gasket failure and catastrophic engine damage. This assembly restores precise thermal management, ensures stable idle quality, and maintains your diesel engine's efficiency and lifespan. With a 12-month warranty and OE-matched performance, it's the definitive fix for overheating or cold-running diesel Land Rovers and Jaguars.
Ready to Restore Engine Temperature Control?
This OE-spec thermostat housing brings your diesel engine back to factory thermal performance. Direct fit, 12-month warranty, and free worldwide shipping on orders over £50.
Shop Now
Use code 22GET20 for 20% off any 2 items.
✓ 30-Day Money Back
✓ 4.9/5 Stars 12,300+ reviews
✓ Worldwide DHL shipping
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All product names, logos, and brands mentioned are the property of their respective owners. This product is designed for compatibility; fitment and performance outcomes depend on proper installation and vehicle condition.
```
3.0 V6 DIESEL OIL COOLER WITH O'RING GASKETS FOR LAND ROVER DISCOVERY 4 RANGE ROVER RR SPORT OIL RADIATOR BASE LR013149 LR040738
from £ 342.89
Victorious · Discovery 4 · Cooling System
Oil Cooler with O-Ring Gaskets – Discovery 4 3.0L V6 Diesel
OEM-specification cooling system replacement engineered for Land Rover 3.0L TDV6 engines. Restores stable oil temperatures and engine reliability.
LR013149
LR040738
Discovery 4 LR4
2009–2016
3.0L Diesel
Direct Fit
Overview
The Discovery 4 3.0L TDV6 is a workhorse engine, but prolonged towing, hot climates, and age take their toll on the oil cooler. A failing cooler leads to uncontrolled oil temperatures, carbon buildup, reduced fuel economy, and potential engine damage. This OEM-specification replacement cooler with integrated O-ring gaskets restores precise thermal management and protects your engine's longevity.
Engineered to Land Rover's original tolerances, this cooler integrates seamlessly with your Discovery 4's cooling and lubrication circuits. The included gasket set (LR013151, LR013161, LR013162) ensures a sealed, professional installation—no surprises, no leaks.
Built for reliability and backed by Victorious's 30-day guarantee, this is the cooling system component serious Discovery 4 owners choose when reliability matters.
What's Included
⚙️
Oil Cooler Assembly
LR013149 / LR040738
⭕
O-Ring Gasket Set
LR013151, LR013161, LR013162
📋
Installation Guide
Step-by-step reference
✅
30-Day Guarantee
Victorious assurance
Product Highlights
OEM-specification design: LR013149 & LR040738 fitment codes
Integrated O-ring gasket set included – no separate sourcing required
3.0L TDV6 diesel engine certified
Direct-fit installation – no modifications
Aluminum construction for efficient thermal dissipation
Prevents oil temperature creep & carbon buildup
Compatible with Range Rover Sport, Range Rover, & Jaguar XF diesel variants
1-year warranty from manufacturer
Worldwide shipping via DHL/FedEx/UPS
Tested on 2009–2016 Discovery 4 & LR4 models
Compatibility
Model
Year
Engine
Fit Status
Land Rover Discovery 4 / LR4
2009–2016
3.0L TDV6
Direct Fit
Range Rover Sport L320
2010–2013
3.0L TDV6
Direct Fit
Range Rover Sport L320
2014+
3.0L TDV6
Direct Fit
Range Rover Vogue L405
2013+
3.0L TDV6
Direct Fit
Jaguar XF / XJ
2014+
3.0L TDV6
Direct Fit
Always verify part numbers against your vehicle's service manual or contact our team at +44 203 943 9919 with your VIN for 100% confirmation.
Installation Notes
Difficulty Level: Intermediate
Requires basic mechanical skill, torque wrench, and coolant. Plan 2–3 hours.
Drain engine oil and coolant into suitable containers; dispose responsibly.
Remove undertray fasteners and lower plastic guards for access.
Disconnect hoses from the existing cooler using a hose clamp tool to prevent spillage.
Remove mounting bolts (typically 3–4 × M8 or M10) and lift the old cooler clear.
Clean the mounting surface and hose ports thoroughly with a lint-free cloth.
Install new O-ring gaskets onto the cooler ports – apply a light coat of fresh engine oil to aid sealing.
Position the new cooler on the mounting bracket; hand-tighten bolts first, then torque to 25 Nm (18 ft-lb).
Reconnect hoses; use hose clamps rated for coolant circuits (typically 80–100 mm diameter).
Refill coolant to the expansion tank mark; run the engine at idle for 3–5 minutes to bleed air.
Top up oil to the dipstick MAX mark and allow the engine to cool naturally (20 minutes).
Reinstate undertray fasteners and check for any leaks around hose connections.
Important: Always use fresh OEM coolant (typically Pentosin or Castrol) to maintain corrosion inhibition. Never force hoses—modern diesel coolers are pressure-sensitive. If you lack experience, professional installation is recommended.
Why Victorious?
We've spent over a decade sourcing the right OEM-specification cooling parts for Land Rover and Range Rover diesel engines. This cooler has been verified on hundreds of Discovery 4s, Sport variants, and Jaguars. We don't sell cheap aftermarket guesses—we sell the parts we'd fit on our own vehicles.
Ready to Restore Your Cooling System?
Stop guessing about oil temperatures. This OEM cooler with gaskets is the professional's choice for Discovery 4 TDV6 reliability. Ships worldwide in 2–3 working days.
Shop Oil Cooler Now
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ verified reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL/FedEx/UPS shipping
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or their parent companies. All product names, logos, and trademarks referenced are the property of their respective owners. This product is sold as a compatible aftermarket component for the listed vehicles. Always verify compatibility with your vehicle's documentation before purchase.
NEW 2.2L DIESEL TURBO INTERCOOLER HOSE PIPE TO THROTTLE BODY FOR LAND ROVER RANGE ROVER EVOQUE DISCOVERY SPORT LR024304 LR066436
£ 157.22
```html
Victorious · Range Rover Evoque · Cooling System
2.2L Diesel Turbo Intercooler Hose to Throttle Body – Range Rover Evoque & Discovery Sport
OEM-spec replacement intercooler pipe with factory clamps for turbocharged diesel engines—direct bolt-on fitment, no modifications.
LR024304
LR066436
2.2L TDV6 Diesel
Turbo Intercooler
Rubber Hose Assembly
Direct Fit
Overview
The 2.2L TDV6 diesel turbocharged engine in your Range Rover Evoque L538 or Discovery Sport demands precision cooling line integration. This OEM-specification intercooler hose assembly connects the turbo charger outlet directly to the throttle body, channelling cooled compressed air into the intake manifold under high boost conditions. Factory clamps ensure zero-slip security and vibration isolation—critical when managing 300+ PSI of pressurised airflow.
This part (OE LR024304 / LR066436) is engineered to original equipment standards. The reinforced rubber compound resists thermal cycling, fuel vapour, and the aggressive temperature swings inherent to turbodiesel operation. OEM fitment means no adapter hunt, no fitment guesswork, no compromise on boost response or combustion efficiency.
Worn or cracked intercooler pipes cause measurable power loss, soot accumulation, and turbo strain. A factory replacement restores full boost delivery, cleaner combustion, and the responsive throttle feedback your diesel engine was designed to deliver. Partsmost quality meets Victorious Automotive standards—proven on thousands of Evoque and Discovery Sport applications worldwide.
What's Included
🔗
Intercooler Hose Assembly
OEM rubber construction, pre-formed geometry
⚙️
Factory Clamp Kit
Two OEM hose clamps (turbo & throttle body ends)
📋
Installation Guide
Fitment notes & torque specifications included
✔️
12-Month Warranty
Full coverage against defects & material failure
Product Highlights
OEM-spec reinforced rubber compound rated for 300+ PSI boost
Factory-fitted geometry—zero adapter or rerouting required
Pre-installed hose clamps for immediate installation
Direct replacement for OE LR024304 & LR066436
Thermal-resistant construction withstands turbo heat cycles
Aftermarket quality matching original equipment performance
Weighs ~1.36 kg—no added stress on engine bay
Proven fitment across 2015–2022 Evoque L538 models
Compatible with all 2.2L TDV6 turbodiesel Discovery Sport variants
Restores full boost response and combustion efficiency
Compatibility
Vehicle
Year Range
Engine
Fitment
Range Rover Evoque L538
2015–2022
2.2L TDV6 Diesel
Direct Fit
Land Rover Discovery Sport
2015–2022
2.2L TDV6 Diesel
Direct Fit
Range Rover Evoque L551 (Gen 2)
2019+
2.2L TDV6
Not Compatible
Range Rover Sport (gasoline)
All
Petrol engines
Not Compatible
Part Numbers: LR024304 · LR066436
Brand: Partsmost (Aftermarket, OEM-spec)
Origin: Mainland China — quality assured & tested
Installation Notes
Difficulty Level: Intermediate
Requires basic hand tools and engine bay access. Disconnect battery before starting. Budget 45–60 minutes.
Disconnect the negative battery terminal to disable engine management sensors.
Remove the top engine cover or air intake assembly to access the intercooler hose connections.
Locate the turbo charger outlet (upper) and throttle body inlet (lower) connection points.
Loosen the existing hose clamps using a screwdriver or socket set (typically M10–M12 diameter fittings).
Carefully slide off the old hose, noting the orientation and any gasket residue at connection points.
Clean both connection ports with a lint-free cloth; remove any old sealant or debris.
Position the new hose assembly so the upper end connects to the turbo outlet, lower end to the throttle body inlet.
Slide both factory clamps over the connection points and hand-tighten them until snug—do not over-torque.
Using a torque wrench, tighten each clamp to 1.8–2.2 Nm (16–19 lb-ft) for secure, vibration-proof fitment.
Reinstall the air intake assembly and engine cover in reverse order.
Reconnect the battery, start the engine, and listen for any hissing (air leaks) or unusual noises for 30 seconds.
Perform a visual inspection for clamp security; re-check tightness after the first 20 km of driving.
⚠️ Important: Do not operate the engine with a cracked or loose intercooler pipe. Uncontrolled boost leakage can trigger fault codes (P0400, P0403) and reduce combustion efficiency by up to 15%. If you hear persistent hissing after installation, stop the engine immediately and re-inspect clamp tightness.
Ready to Restore Full Boost Performance?
This OEM-spec intercooler hose puts your 2.2L TDV6 diesel back on factory power delivery. No guesswork, no delays. Direct fit, factory clamps, 12-month warranty.
Shop Cooling System Parts
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ verified reviews
🌍 Worldwide shipping via DHL, FedEx, UPS
✓ 30-day money-back guarantee
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or authorised by Jaguar Land Rover Limited, Tata Motors, or any other OEM manufacturer. All product names, logos, and brands are property of their respective owners. This product is designed for the listed vehicles; fitment compatibility is the purchaser's responsibility. We recommend professional installation by a qualified Land Rover technician.
```
Coolant Water Pipe Repair kit of LR049990 for Land Rover Range Rover 10-12 RR Sport 14- 5.0 V8 /All New Discovery 4 Velar 3.0 V6
from £ 32.10
Victorious · Cooling System · Repair Kits
Coolant Water Pipe Repair Kit – LR049990
OEM-specification replacement for Range Rover, Range Rover Sport, Discovery, and Velar cooling systems. Copper and rubber construction ensures durability and thermal reliability.
LR049990
2010–2022
Copper & Rubber
Engine Cooling
Direct Fit
Multiple Vehicles
Overview
The coolant water pipe assembly is a critical component in the engine cooling circuit of modern Range Rovers, Range Rover Sports, Discoveries, and Velars. Over time, rubber gaskets and seals degrade under thermal stress, leading to coolant leaks, overheating, and potential engine damage. This comprehensive repair kit addresses those wear points with OEM-specification copper and rubber parts, restoring coolant integrity without requiring a full system replacement.
Built to factory standards, this kit is engineered for the 5.0L V8 engines in Range Rover (2010–2012) and Range Rover Sport (2014–), as well as the 3.0L V6 petrol engines found in Discovery 4 (LR4), all-new Discovery (2017–), and Range Rover Velar (2017–). The premium copper components resist corrosion and maintain compatibility with all coolant types, while the reinforced rubber ensures a lasting seal under sustained heat and pressure.
Professional installation is recommended, though the modular design allows for staged replacement of individual components if needed. A complete restoration kit—available in single, 5-pack, or 10-pack quantities—makes this ideal for workshop environments or fleets requiring preventive cooling system overhauls.
What's Included
🔧
Main Pipe Assembly
Copper construction with reinforced threads and fittings
⭕
Rubber Gaskets & Seals
Heat-resistant compound rated for 130°C+ operation
📋
Installation Guide
Clear diagrams and torque specifications included
✓
12-Month Warranty
Full replacement coverage on manufacturing defects
Key Highlights
OEM Part Number LR049990 – direct replacement for factory-spec cooling systems
Copper and premium rubber construction resists corrosion and thermal degradation
Compatible with all OEM and approved aftermarket coolants
Temperature rated to 130°C; maintains seal integrity under sustained load
Modular design allows component-by-component installation or full-system overhaul
Fits Range Rover L405 (2010–2012) with 5.0L V8 petrol
Fits Range Rover Sport L494 (2014–) with 5.0L V8 petrol
Fits Discovery 4 LR4 (2010–) and all-new Discovery (2017–) with compatible engines
Fits Range Rover Velar (2017–2022) with 3.0L V6 petrol
Available in single unit, 5-pack, or 10-pack quantities for fleet maintenance
Compatibility Chart
Vehicle Model
Years
Engine
Fit
Range Rover Vogue L405
2010–2012
5.0L V8 Petrol
Direct Fit
Range Rover Sport L494
2014–2021
5.0L V8 Petrol
Direct Fit
Discovery 4 LR4
2010–2016
3.0L V6 Petrol
Direct Fit
Discovery (All-New)
2017–2022
3.0L V6 Petrol
Direct Fit
Range Rover Velar
2017–2022
3.0L V6 Petrol
Direct Fit
Range Rover Diesel Models
All Years
Diesel Engines
Not Compatible
Installation Guide
Difficulty Level: Intermediate | Time: 1–2 hours
Disconnect the negative battery terminal and allow the engine to cool completely.
Locate the coolant water pipe assembly beneath the inlet manifold (upper driver's side on V8 engines; center intake area on V6 engines).
Unbolt the old pipe assembly using a 10mm socket and secure the engine block with a jack and wood block if needed for access.
Remove all old gaskets and rubber seals; use a gasket scraper to clean the mating surfaces down to bare metal.
Inspect the new copper pipe for any manufacturing burrs; smooth with fine emery cloth if present.
Install new rubber gaskets on both ends, then slide the copper pipe into place, aligning all threaded holes.
Reinstall bolts in a star pattern, tightening to 24 Nm (18 ft-lb) on V8 engines and 20 Nm (15 ft-lb) on V6 engines.
Top up coolant reservoir with OEM-approved coolant and bleed the system at the highest bleed screw (typically on the thermostat housing).
Run the engine at idle for 10 minutes, then check all connection points for weeps under load.
Allow the engine to cool, then top up coolant level once more before road testing.
⚠ Important: Never open the coolant system on a hot engine. Always drain and dispose of coolant responsibly at an approved recycling facility. Check your vehicle's service manual for exact torque settings and bleed screw locations, as these vary by engine type.
Get Your Cooling System Back to Factory Spec
Coolant leaks don't resolve themselves—they escalate into overheating, head gasket failure, and expensive engine repairs. Order this OEM-specification repair kit now and restore your Range Rover, Discovery, or Velar to reliable, leak-free operation.
Shop Now
Use code 22GET20 for 20% off any 2 items
✓ 30-Day Money-Back Guarantee
✓ 12-Month Warranty
✓ Worldwide DHL Shipping
✓ 4.9★ — 12,300+ Reviews
✓ UK Support: +44 203 943 9919
Victorious Automotive is an independent aftermarket retailer. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed to meet or exceed OEM specifications and is compatible with the listed vehicles; fitment responsibility rests with the end user or installer. Always verify compatibility with your vehicle's VIN or service manual before purchase.
3.0 V6 5.0 V8 Petrol Coolant Thermostat Housing for LAND ROVER Discovery 4 Range Rover RR Sport Velar LR023429 LR032135 LR035124
from £ 125.56
Victorious · Land Rover · Engine Cooling
Coolant Thermostat Housing – 3.0L V6 & 5.0L V8 Petrol
OEM-grade precision cooling component for Discovery 4, Range Rover, Range Rover Sport, and Velar engines.
Discovery 4 LR4
Range Rover L405
Range Rover Sport L494
Range Rover Velar
2010–2022
V6 & V8 Petrol
Polypropylene Housing
Direct Fit
Overview
The thermostat housing assembly is the critical interface between your engine's cooling system and its temperature management. On Discovery 4, Range Rover, Range Rover Sport, and Velar models powered by 3.0L V6 or 5.0L V8 petrol engines, OEM-spec thermostats manage coolant flow with precision—maintaining optimal operating temperature under motorway speeds, off-road stress, and stop-start urban driving.
This replacement housing is engineered to factory specifications, sourcing the same polypropylene blend and internal geometry as the original. It includes the thermostat element and is ready to install, restoring proper temperature regulation if your current housing is cracked, leaking, or causing erratic gauge readings.
Overheating or cold-running engines are both serious. A worn thermostat can trigger limp-mode throttling and long-term engine wear. This direct-fit assembly gets your cooling system back on spec without guesswork or adaptation—exactly as Land Rover intended.
What's Included
🔧
Thermostat Housing Assembly
Complete unit with integrated thermostat element
📋
Part Number Reference Card
OEM numbers: LR035124, LR032135, LR023429
🛡️
30-Day Money-Back Guarantee
Full refund if not satisfied. No questions asked.
📞
Expert Support Line
+44 203 943 9919 Mon–Fri, 9am–7pm (UK time)
Product Highlights
OEM-equivalent polypropylene construction; handles peak engine temperatures without warping
Sealed thermostat element; maintains factory opening and closing temperatures
Integrated inlet and outlet ports; no adapters or modifiers needed
Compatible with both V6 TDV6 and V8 petrol powerplants across 2010–2022 model years
Cross-referenced to 7 factory part numbers for assured fitment verification
Pre-inspected; tested for leaks before dispatch
Compact 16 × 16 × 10cm; ships worldwide via DHL, FedEx, UPS, or TNT
Lightweight polypropylene reduces NVH transmission compared to metal housings
Fail-safe design prevents sudden overheating or cold-running conditions
Backed by 12-month warranty against manufacturing defects
Compatibility at a Glance
Vehicle Model
Engine Type
Year Range
Compatibility
Land Rover Discovery 4 (LR4)
3.0L V6 Petrol
2010–2016
Direct Fit
Land Rover Discovery 4 (LR4)
5.0L V8 Petrol
2010–2016
Direct Fit
Range Rover Vogue (L405)
3.0L V6 Petrol
2013 onwards
Direct Fit
Range Rover Vogue (L405)
5.0L V8 Petrol
2010–2012
Direct Fit
Range Rover Vogue (L405)
5.0L V8 Petrol
2013 onwards
Direct Fit
Range Rover Sport (L494)
3.0L V6 Petrol
2014 onwards
Direct Fit
Range Rover Sport (L494)
5.0L V8 Petrol
2010–2013
Direct Fit
Range Rover Sport (L494)
5.0L V8 Petrol
2014 onwards
Direct Fit
Range Rover Velar
3.0L V6 Petrol
2017 onwards
Direct Fit
Jaguar XF
3.0L V6 & 5.0L V8
2009–2015
Direct Fit
Jaguar XJ
3.0L V6 & 5.0L V8
2010–2019
Direct Fit
Jaguar F-TYPE
5.0L V8
2014 onwards
Direct Fit
Not sure? Cross-check your OEM part number against our reference list: LR035124, LR032135, LR029143, LR023429, LR010799, AJ812976, C2Z19929. Message us with your VIN and we'll confirm fitment instantly.
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
Engine Cool-Down: Allow engine to cool fully. Never work on a hot cooling system—risk of scalding coolant spray and engine damage.
Drain Coolant: Locate the lower radiator hose or drain plug. Drain coolant into a clean container. Dispose of old coolant responsibly; it is toxic.
Remove Old Housing: Unbolt the old thermostat housing from the engine block (typically 2–4 bolts). Carefully peel away the gasket and inspect the mounting surface for debris or corrosion.
Install New Housing: Clean mounting surface lightly. Position the new housing with gasket; hand-tighten bolts first, then torque to 25–30 Nm in a star pattern. Do not over-torque polypropylene.
Refill Coolant: Use OEM-spec coolant (typically pink/red Jaguar Land Rover blend). Fill to the cold-fill mark on the expansion tank. Never mix coolant types.
Bleed Air: Start the engine and allow it to warm. Open any bleed screws on the radiator or thermostat housing to purge trapped air. Top up as needed.
Test & Monitor: Check temperature gauge behavior over 15 minutes of running. The needle should climb smoothly and stabilise near centre. Listen for abnormal coolant sounds.
⚠️ Critical: Never remove the expansion tank cap while the engine is warm or running. Allow 30 minutes of cool-down time before any work. If coolant leaks during refill, check bolt torque and gasket seating—do not ignore drips.
Why Victorious?
We specialise in Land Rover, Range Rover, and Defender engineering. Every product is bench-checked against OEM geometry. We ship worldwide within 48 hours via tracked DHL, FedEx, UPS, or TNT. If this thermostat housing doesn't match your expectations, you have 30 days to request a full refund—no return postage charged on our side. And if you're buying two or more parts, use code 22GET20 for 20% off.
Ready to Restore Cooling Precision?
A properly functioning thermostat is non-negotiable. Overheating or cold-running engines lead to limp-mode, loss of power, and long-term block damage. This OEM-spec housing gets your cooling system back on target.
Shop Discovery 4 Parts
Shop Range Rover Sport Parts
Use discount code 22GET20 for 20% off any 2 items.
⭐ 4.9/5 – 12,300+ verified reviews
🚚 48-hour dispatch – Worldwide shipping
🛡️ 30-day money-back – Zero-risk guarantee
📞 Expert support – +44 203 943 9919
Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., JLR, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This description is for reference only. Fitment and compatibility are customer responsibility; we recommend verification via VIN before purchase. Warranty covers manufacturing defects only, not labour, installation, or indirect damage.
INTERCOOLER INLET MANIFOLD PIPE FOR LAND ROVER LR2 FREELANDER 2.2 INTERCOOLER TO MANIFOLD HOSE WITH CLAMPS NEW LR066429 LR002589
from £ 169.09
Victorious · Freelander LR2 · Cooling System
Intercooler Inlet Manifold Hose — Freelander LR2 2.2 TDi
OEM-specification turbo-to-manifold pipe assembly with stainless steel clamps. Direct replacement for worn or leaking intercooler hoses on 2008–2014 Freelander 2.2 diesel engines.
Freelander LR2
2008–2014
2.2 TDi Diesel
OEM-Spec
Cooling System
Overview
The Land Rover Freelander LR2 2.2 TDi is renowned for its refined diesel efficiency, but the turbocharger cooling circuit is among the most critical systems to maintain. The intercooler inlet manifold hose connects the turbo's boost pressure outlet directly to the inlet manifold, managing extreme temperature and pressure conditions on every drive.
This OEM-specification intercooler hose assembly delivers genuine performance and reliability. Built to Land Rover's original equipment standards (part numbers LR066429, LR002589, LR000927), it features reinforced rubber construction with dual stainless steel hose clamps rated for sustained boost pressure and thermal cycling. Perfect as a replacement for failed, cracked, or weeping hoses that compromise turbo efficiency.
Premium aftermarket engineering means it fits your Freelander exactly as the factory intended—no modifications, no guesswork. Whether you're addressing a boost leak or preventative maintenance, this hose restores full turbo responsiveness and protects downstream engine components from pressure loss.
What's Included
🔗
Intercooler Hose Assembly
Reinforced rubber with 74mm/67mm OD connectors
🔩
Stainless Steel Clamps (×2)
Pre-installed, ready to mount
📋
Installation Guide
Step-by-step, with torque specs
✅
12-Month Warranty
Material and workmanship guarantee
Product Highlights
OEM-Specification Design – Engineered to Land Rover's original equipment standards
Reinforced Rubber Construction – Handles sustained boost pressure and thermal cycles
Dual Stainless Steel Clamps – Corrosion-resistant, pre-torqued for security
74mm / 67mm Connectors – Exact OEM outer diameters for perfect fit
Front-Right Lower Placement – Replaces turbine-to-manifold section precisely
Weight: ~1.2kg – Minimal installation mass, no structural compromise
Direct Replacement – No cutting, adapting, or modifications required
Tested for 2008–2014 Freelander 2.2 TDi – Full model-year compatibility verified
Quick Installation – Typically completed in under 1 hour by experienced technicians
Restores Turbo Efficiency – Eliminates boost leaks, maintains peak responsiveness
Compatibility
Vehicle Model
Year Range
Engine
Fit
Land Rover Freelander LR2
2008–2014
2.2 TDi (Single Turbo)
Direct Fit
Land Rover Freelander LR2
2006–2007
2.2 TDi
Verify OEM#
Land Rover Freelander 1
All years
All engines
Not Compatible
Range Rover Sport / Vogue
All years
All engines
Not Compatible
Part Numbers Covered: LR066429 · LR002589 · LR000927. Always verify your existing part number before ordering. Contact us with your VIN for absolute confirmation.
Installation
Difficulty: Intermediate | Time: 45–60 minutes
Disconnect the battery negative terminal and allow the coolant system to cool completely.
Locate the intercooler hose running from the turbocharger outlet to the inlet manifold (front-right lower position).
Remove the two stainless clamps using a 10mm or 11mm socket wrench, working gently to avoid damaging the fittings.
Slide the old hose away from both connectors. Some coolant residue may drip—have a catch pan ready.
Inspect the turbo outlet and manifold inlet for debris, scoring, or corrosion. Clean lightly with a soft cloth if needed.
Position the new hose assembly over both connectors, ensuring full seating at each end.
Reinstall the stainless steel clamps with the bolts facing downward. Torque to 12–15 Nm (9–11 lb-ft) in a cross pattern for even pressure.
Refill the coolant reservoir to the minimum mark and check for leaks at idle for 5 minutes.
Reconnect the battery and clear any engine codes using a diagnostic scanner if necessary.
⚠ Important: Work only on a cold engine. Do not loosen the intercooler hose under pressure or while the engine is running. If you detect oil or fuel contamination in the coolant system, the turbocharger may require inspection. Always dispose of old coolant responsibly.
Why Victorious?
We specialise in precision OEM-specification cooling system parts for Land Rover and Range Rover models. This intercooler hose has been selected and tested for the Freelander LR2 community because it meets the same engineering tolerances as the original equipment—no compromise on fit, durability, or turbo protection.
Every part ships with our 30-day money-back guarantee. If it doesn't perform as described, we'll refund you in full, no questions asked.
Ready to Restore Turbo Efficiency?
This OEM-spec intercooler hose eliminates boost leaks and returns your Freelander LR2 2.2 TDi to factory turbo performance. Order now with worldwide DHL shipping.
Add to Cart
Use code 22GET20 for 20% off when you buy any 2 items.
✓ 30-Day Money Back
✓ Ships Worldwide
✓ 4.9★ Trusted
✓ Expert Support
Need help? Call +44 203 943 9919 (Mon–Fri 9am–7pm) or email us anytime.
Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and specifications are used for reference only. This product is an aftermarket component manufactured to OEM-equivalent standards and is not an official Land Rover part.
Throttle Body Heater Outlet Hose LR045239 Coolant Thermostat Water Pipe LR049990 For Range Rover 10-12 RR Sport 14- Discovery 4
from £ 48.34
```html
Victorious · Cooling System · OEM Parts
Throttle Body Heater Outlet Hose & Coolant Thermostat Water Pipe Set
Direct replacement cooling system components for Range Rover, Range Rover Sport, Discovery, and Defender models. OEM-spec fitment, 12-month warranty included.
Range Rover L405
Range Rover Sport L494
Discovery 4
2010–2022
Cooling System
OEM Equivalent
What You're Getting
This is a precision-engineered cooling system component set designed for Land Rover and Range Rover vehicles. Whether you're replacing a worn heater outlet hose or upgrading your thermostat water pipe, these parts restore cooling efficiency and prevent heat-related drivetrain issues.
Both components are manufactured to OEM specifications using high-grade polymers and reinforced rubber compounds. They're engineered to withstand the thermal and pressure cycles of supercharged and naturally aspirated engines across Range Rover and Discovery lineups.
Choose your configuration: throttle body heater outlet hose alone (LR045239), or pair it with the coolant thermostat water pipe (LR049990) for comprehensive cooling system maintenance.
What's Included
🔧
Heater Outlet Hose
LR045239 – Direct fit replacement
💧
Thermostat Water Pipe
LR049990 – Optional inclusion
📋
Installation Guide
Fitment verification & step-by-step
✓
12-Month Warranty
Defect coverage & replacement promise
Product Highlights
OEM equivalent engineering – matches original equipment specifications
Premium polymer construction – reinforced for high-temperature cycles
Direct bolt-on fit – no modifications required
Supercharger compatible – rated for SC engine thermal loads
Fast installation – 20–30 minutes with standard tools
Reduces overheating risk – restores thermostat regulation
Multiple model support – 2010–2022 Range Rover, Sport, Discovery
Cost-effective upgrade – complete cooling system refresh
Pressure tested – validated for OEM durability
12-month defect warranty included
Compatibility Matrix
Vehicle
Year Range
Engine
LR045239
LR049990
Range Rover Vogue
2010–2012
5.0L SC V8
✓ Fit
✓ Fit
Range Rover Vogue
2013–2020
5.0L / 3.0L SC
✓ Fit
N/A
Range Rover Sport
2010–2013
5.0L SC V8
✓ Fit
N/A
Range Rover Sport
2014–2022
5.0L / 3.0L SC
✓ Fit
✓ Fit
Discovery 4 (LR4)
2010–2016
3.0L SC V6
✓ Fit
✓ Fit
Discovery 5
2017–2022
3.0L SC V6
✓ Fit
✓ Fit
Range Rover Velar
2018–2022
3.0L / 5.0L SC
✓ Fit
✓ Fit
Defender 110
2020–2024
5.0L Petrol
✓ Fit
N/A
Before purchasing: Confirm your vehicle's year and engine type. Cross-reference your existing part number (should match LR045239 or LR049990). If uncertain, provide your VIN for instant fitment verification. Call us at +44 203 943 9919 Mon–Fri 9am–7pm GMT.
Installation Notes
DIY Installation – Intermediate | 20–30 Minutes
Prepare: Allow engine to cool completely. Disconnect the negative battery terminal. Drain coolant into a container (catch spillage).
Locate components: Heater outlet hose routes from throttle body to heater core. Thermostat water pipe connects to coolant jacket.
Remove old hose: Unbolt mounting brackets. Disconnect hose clamps (save for reuse or upgrade). Withdraw old component carefully—coolant residue expected.
Install new hose: Position new hose in same routing. Secure with original clamps or upgrade to stainless steel hose clamps (recommended). Ensure no kinks or twists.
For thermostat water pipe: Disconnect inlet and outlet lines. Remove fasteners. Install new pipe. Use OEM gaskets; apply thin layer of silicone sealer. Torque to 7–9 Nm.
Refill coolant: Pour fresh coolant (OEM spec: HOAT or equivalent). Bleed air from system per owner's manual. Top up reservoir.
Test: Start engine, monitor temperature gauge for 5 minutes. Check for leaks around connections. Recheck coolant level after 10 miles.
⚠ Warning: Coolant is toxic. Keep away from skin and eyes. Do not dispose in storm drains. Wear safety gloves and eye protection. If you lack tools or confidence, have a Land Rover specialist perform installation.
Ready to Restore Your Cooling System?
Choose between single-component replacement or full cooling system upgrade. Both configurations include OEM-spec engineering, direct fitment, and our 12-month defect warranty. Order now and ship worldwide via DHL, FedEx, or UPS.
Shop Cooling Components
Use code 22GET20 for 20% off any 2 items.
⭐ 4.9/5 from 12,300+ owners
🚚 Worldwide shipping via DHL/FedEx
✅ 30-day guarantee – refund if not satisfied
📞 +44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket parts specialist. We are not affiliated with, endorsed by, or a subsidiary of Jaguar Land Rover Ltd, Range Rover, Land Rover, or Defender brands. All product names and logos are the registered trademarks of their respective owners. Our products are designed to be compatible with these vehicles but are sold as aftermarket alternatives.
```
OIL COOLER GASKET FOR LAND ROVER 3.0L LR4 RR SPORT 14- NEW DISCOVERY / 5.0L V8 RANGE ROVER 10-12 VELAR JAGUAR AJ811904 LR010770
from £ 43.56
Victorious · Cooling System · OEM Components
Oil Cooler Gasket – LR4, Discovery, Range Rover Sport & Velar
Factory-spec seal for 3.0L V6 and 5.0L V8 engines. Prevent oil leaks and maintain thermal efficiency.
LR4 (L319)
Discovery (L405)
Range Rover Sport (L494)
Range Rover Velar
2010–2022
OEM Gasket
Cooling System
Overview
The oil cooler gasket is a critical thermal management component fitted to 3.0L TDV6, 3.0L petrol, and 5.0L V8 Land Rover and Range Rover engines. Located at the junction between the oil cooler unit and the engine block, this seal prevents oil migration and maintains pressure integrity across the cooling circuit.
Over time, factory gaskets degrade under thermal cycling and vibration, leading to seepage around the oil cooler mount. A failed seal compromises both engine protection and fuel economy, and can trigger warning lights on newer models. This OEM-spec replacement restores factory sealing performance and is essential maintenance on any high-mileage Discovery, LR4, Range Rover Sport, or Velar with the transverse-mounted cooler unit.
Partsmost supplies this gasket as a direct replacement matched to original equipment specifications. Installation is straightforward for any owner with basic mechanical skill or professional technician. Backed by a 12-month warranty and 30-day money-back guarantee from Victorious Automotive.
What's Included
⚙️
Oil Cooler Gasket
OEM replacement seal (LR010770 / AJ811904)
📋
Installation Guide
Step-by-step instructions & torque specs
Product Highlights
OEM gasket geometry – exact fit to OE cooler mounting surface
Thermal-rated material – withstands 140°C+ sustained oil temperatures
Cross-compatible – fits 3.0L V6 TDV6, 3.0L petrol, and 5.0L V8 engines
Eliminates oil weeping – prevents $400+ cooler replacement scenarios
Factory torque spec – ensures even clamp load and long seal life
1-year warranty – full defect coverage from Victorious Automotive
Fast dispatch – ships within 2 working days worldwide
No core exchange – plug-and-play replacement, no core return required
Thermal cycling tested – approved for seasonal temperature swings
Cost-effective prevention – avoids cascading engine damage costs
Vehicle Compatibility
Vehicle
Code
Years
Engine
Fit
Discovery
L405
2010–2016
3.0 TDV6 / 3.0 Petrol
Direct Fit
Discovery Sport
L550
2015–2024
2.0 Si4 / 2.0 D240
Not Compatible
LR4
L319
2010–2016
3.0 TDV6 / 3.0 Petrol
Direct Fit
Range Rover Sport
L494
2014–2022
3.0 Supercharged / 5.0 V8
Direct Fit
Range Rover
L405
2010–2022
5.0 V8 Supercharged
Direct Fit
Range Rover Velar
L560
2017–2024
3.0 Supercharged / 5.0 V8
Direct Fit
Jaguar F-Pace / XF
X761/X260
2015–2024
3.0 Supercharged / 5.0 V8
Direct Fit
Note: Confirm your OEM part number (LR010770 or AJ811904) before purchase. Contact us with your VIN for verification.
Installation Notes
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect the negative battery terminal and allow engine to cool completely (minimum 2 hours after last run).
Locate the oil cooler unit mounted transversely below the intake manifold (behind the water pump on 3.0L engines; behind the supercharger on 5.0L V8).
Remove the cooler inlet and outlet hoses using hose clamps and drain plug. Catch residual oil in a drip pan (approximately 1.5 litres).
Unbolt the cooler mounting brackets (typically 2–3 M10 bolts at 25 Nm each). Carefully slide the unit away from the engine block.
Remove the old gasket and clean the mounting surface on both the cooler and engine block with a soft brass brush or cloth. Ensure no debris remains in the oil passages.
Position the new gasket onto the engine block mounting surface, aligning the hose ports.
Reinstall the cooler unit and torque all mounting bolts to 25 Nm in a star pattern to ensure even clamp load.
Reconnect hoses and refill with fresh engine oil. Recheck oil level after a short test run.
Clear any fault codes (if present) using a diagnostic scan tool and verify no leaks around the cooler base.
⚠ Important: Do not reuse the old gasket. Always use a new seal to guarantee thermal and pressure integrity. If oil cooler lines appear corroded or damaged, consider flushing the entire cooling circuit before installation.
Ready to Restore Oil Cooler Integrity?
Prevent seepage, maintain thermal efficiency, and avoid costly cooler replacement. This OEM-spec gasket is the smart preventive choice for any Land Rover or Range Rover owner running high-mileage engines.
Shop Oil Cooler Gasket
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ reviews
30-day money-back guarantee
Worldwide DHL, FedEx, UPS
+44 203 943 9919 Mon–Fri 9am–7pm
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Tata Motors (JLR Group). All product names and trademarks are the property of their respective owners. This product is supplied as an aftermarket replacement part and carries a 12-month warranty from Partsmost / Victorious Automotive only.
3.0L V6 Heater Manifold Tube With Sensor For Land Rover Discovery LR4 Range Rover RR Sport Coolant Water Pipe LR041788 LR109401
from £ 130.52
Victorious Automotive · Land Rover Discovery / Range Rover · Cooling System
3.0L V6 Heater Manifold Tube with Integrated Sensor
Direct OEM-spec replacement for Land Rover Discovery LR4, Range Rover, and Range Rover Sport with AJ126 supercharged engines.
Discovery LR4
Range Rover L405
Range Rover Sport L494
2010–2020
AJ126 Engine
Coolant Water Pipe
Temperature Sensor
Overview
The heater manifold tube is a critical cooling system component that regulates coolant flow to your cabin heater and engine bay. On Land Rover Discovery LR4, Range Rover (L405), and Range Rover Sport (L494) models, the integrated sensor monitors coolant temperature in real time—essential data for engine management and climate control.
Over time, plastic housings can develop micro-fractures or internal corrosion, causing coolant leaks, cabin heating loss, or temperature warning codes. Replacing with a genuine OEM-spec part restores full cooling efficiency, eliminates leaks, and clears sensor-related faults.
This part is engineered to exact Land Rover and Jaguar (XJ, XF, F-TYPE, XE, F-PACE) specifications for the AJ126 3.0L supercharged V6 petrol engine, delivering the same fit, form, and function as the original factory component.
What's Included
📦
1× Heater Manifold Tube
Complete assembly with integrated temperature sensor
🔖
OEM Part Numbers
LR041788, LR075991, LR109401 verified
✓
Direct Replacement
No modifications required for installation
🛡️
12-Month Warranty
Full coverage against manufacturing defects
Product Highlights
OEM-spec plastic construction rated for high-temperature coolant cycles
Integrated NTC thermistor sensor for precise temperature monitoring
Direct bolt-on fit—no adapters or custom fabrication needed
Compatible with Discovery LR4, Range Rover L405, and RR Sport L494
Also fits Jaguar XJ, XF, F-TYPE, XE, and F-PACE with AJ126 engine
Seals front-mounted coolant gallery connections without leaks
Eliminates temperature warning codes and heater malfunction
Tested for 50,000+ mile durability under UK and European conditions
Supplied with sensor wiring pre-attached and ready to connect
Dimensions: 30cm L × 17.5cm W × 9.5cm H—compact, efficient design
Compatibility Table
Vehicle
Year Range
Engine
Fit
Land Rover Discovery LR4
2010–2016
AJ126 3.0L V6 Supercharged
Direct Fit
Range Rover Vogue (L405)
2013–2020
AJ126 3.0L V6 Supercharged
Direct Fit
Range Rover Sport (L494)
2014–2020
AJ126 3.0L V6 Supercharged
Direct Fit
Jaguar XJ
2010–2019
AJ126 3.0L V6 Supercharged
Direct Fit
Jaguar XF
2011–2020
AJ126 3.0L V6 Supercharged
Direct Fit
Jaguar F-TYPE
2013–2020
AJ126 3.0L V6 Supercharged
Direct Fit
Jaguar XE
2015–2020
AJ126 3.0L V6 Supercharged
Direct Fit
Jaguar F-PACE
2015–2020
AJ126 3.0L V6 Supercharged
Direct Fit
Discovery Sport
2015+
Petrol variants only
Not Compatible
Range Rover Evoque
All years
N/A—different coolant system
Not Compatible
Installation Notes
🔧 Installation Overview
Difficulty: Intermediate | Time: 45–90 minutes | Tools: Socket set, coolant drain pan, gasket scraper, torque wrench
Drain coolant: Place drain pan under the radiator. Open the bottom drain plug and lower hose clamp to empty the system (save 2–3 liters for refill).
Remove inlet/outlet hoses: Unbolt the heater inlet and outlet hoses from the manifold tube using a 10mm socket. Plug openings to prevent coolant loss.
Disconnect the sensor: Carefully unplug the temperature sensor wiring harness from the old tube.
Unbolt the manifold tube: Remove the three M8 bolts securing the tube to the cylinder head or engine bay bracket. Lift away the old assembly.
Clean gasket surfaces: Use a plastic gasket scraper to remove old sealant and debris from the cylinder head mounting points. Wipe clean with a lint-free cloth.
Install new tube: Position the new manifold tube and reinstall the three bolts. Torque to 23 Nm (17 ft-lbs) in a star pattern to ensure even seating.
Connect the sensor: Plug the temperature sensor wiring harness into the new assembly—it will click when fully seated.
Reattach hoses: Reconnect the inlet and outlet coolant hoses, securing hose clamps firmly (do not overtighten).
Refill coolant: Pour fresh coolant (Land Rover Approved Coolant or equivalent 50/50 mix) into the radiator filler neck. Bleed air by opening the thermostat housing bleed valve while filling until coolant flows steadily.
Test and check: Start the engine and allow it to idle for 5 minutes. Verify no leaks at hose connections or around the manifold sealing surface. Check that cabin heat reaches full temperature within 10 minutes of driving.
⚠️ Important: Always allow the engine to cool for 30+ minutes before draining coolant—pressurized hot coolant can cause severe burns. Wear eye protection and dispose of used coolant responsibly at an approved recycling center. Do not leave the system partially drained for extended periods, as this can introduce air and cause overheating.
Why Choose This Part
Unlike generic aftermarket tubes, this component is engineered to Land Rover and Jaguar OEM specifications with the exact sensor sensitivity and housing geometry needed for proper engine management. The integrated temperature sensor directly feeds your vehicle's ECU—an incorrectly calibrated or poorly sealed unit can trigger diagnostic trouble codes and cause heating or cooling faults.
Our part is manufactured to the same tolerances as the original, ensuring seamless integration with your existing cooling system, electrical harness, and diagnostic systems. The 12-month warranty backs every unit against manufacturing defects.
Ready to Restore Your Cooling System?
Stop dealing with cabin heat loss, coolant leaks, and temperature warning codes. Upgrade to a genuine OEM-spec heater manifold tube and get back to confident driving.
Shop Now
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ verified reviews
🌍 Worldwide shipping via DHL, FedEx, UPS
✓ 30-day money-back guarantee
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or a subsidiary of Jaguar Land Rover Limited, the JLR Group, or their parent company. All vehicle names, logos, and trademarks are the property of their respective owners. This product is designed for direct OEM replacement and compatibility only; fitment and installation are the sole responsibility of the customer. Always verify part numbers and vehicle specifications before purchase. Victorious Automotive assumes no liability for improper installation, modification, or use outside intended application.
2.2L TURBO DIESEL WATER BY-PASS HOSE FOR LAND ROVER FREELANDER 2 RANGE ROVER EVOQUE DISCOVERY SPORT JAGUAR XF AJ811151 LR001311
£ 592.15
```html
Victorious · Land Rover · Cooling System
2.2L Turbo Diesel Water Bypass Hose
OEM-spec thermostat-to-pump bypass hose for Freelander 2, Range Rover Evoque, Discovery Sport, and Jaguar XF diesel engines.
Freelander LR2 2006–2014
Range Rover Evoque 2012+
Discovery Sport L550
2.2L Diesel
OEM Direct Fit
New Condition
Overview
The cooling system in your Land Rover Freelander 2, Range Rover Evoque, or Discovery Sport relies on critical circulation patterns to maintain optimal operating temperature. The bypass hose is the conduit connecting your thermostat housing directly to the water pump—a passage that manages coolant flow during warm-up cycles and steady running.
This is an OEM-spec bypass hose (Partsmost manufacture, original equipment matching) with part numbers LR001311 and AJ811151. It's engineered to exact factory specifications, ensuring seamless integration with your 2.2L turbo diesel engine's cooling circuit. Unlike generic hoses, this component maintains precise inner diameter tolerances and is resistant to diesel-engine heat and pressure cycles.
If your bypass hose shows signs of weeping, deterioration, or coolant leakage around the thermostat area, replacement is urgent—a compromised hose can trigger air pockets in the system, erratic temperature gauges, and thermal stress on the engine. This new hose restores reliability and protects your investment.
What's Included
📦
1× Bypass Hose Assembly
OEM-spec, direct-fit thermostat to pump
🔧
Ready-to-Install
No cutting, no modifications needed
✅
12-Month Warranty
Manufacturing defects covered
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT standard
Product Highlights
OEM-quality materials tested for 2.2L diesel thermal and pressure cycling
Direct-fit connector orientation—no adapters or re-routing required
Part numbers: LR001311 (Land Rover) / AJ811151 (Jaguar cross-reference)
High-temperature rubber compound rated for diesel engine operating range
Factory hose length and diameter—matches original equipment exactly
Compatible with both LR2 (2006–2014) and modern Evoque/Discovery Sport platforms
Protects thermostat housing and water pump connection from coolant weeping
Zero chemical concerns—safe for all coolant types (OAT, HOAT, conventional)
New condition, not refurbished or reconditioned
30-day money-back guarantee if incompatibility occurs (rare)
Compatibility Table
Vehicle
Year Range
Engine
Fit Status
Land Rover Freelander 2 (LR2)
2006–2014
2.2L TDi Diesel
Direct Fit
Range Rover Evoque
2012–2022
2.2L TDi Diesel
Direct Fit
Land Rover Discovery Sport (L550)
2015+
2.2L TDi Diesel
Direct Fit
Jaguar XF
2009–2015
2.2L TDi Diesel
Direct Fit
Other petrol/diesel variants
Any
Non-2.2L TDi
Not Compatible
Verify before purchase: Confirm your engine is a 2.2L turbo diesel. Petrol models use different hose routes. If unsure, provide your VIN or vehicle registration; we'll confirm fitment free of charge.
Installation Notes
Difficulty: Intermediate | Time: 30–45 minutes
Disconnect battery negative terminal and allow engine to cool fully (at least 2 hours after last running).
Drain coolant partially into a clean container. You'll lose roughly 1–1.5L when removing the hose. Save it for refilling if it's fresh.
Locate the thermostat housing on top of the engine (driver's side, adjacent to the cylinder head).
Remove hose clamps at both thermostat and water pump connections using a hose clamp tool or screwdriver. Note clamp orientation.
Carefully twist and slide off the old hose. Some seizing is normal; gentle pressure prevents cracking connection ports.
Inspect connection ports for debris or corrosion. Wipe clean with a lint-free cloth if needed.
Dry-fit the new hose to confirm alignment. It should sit without forcing.
Slide the new hose onto both connections and secure with original or new clamps. Tighten firmly but not excessively (hand-tight plus a quarter turn).
Refill coolant to the cold-fill line. Bleed air by running the engine on idle for 5 minutes with the expansion tank cap loose.
Check for leaks at both hose connections under idle and light load. Let sit for 10 minutes, then inspect again.
Reconnect battery and clear any fault codes if they appear.
⚠ Important: Never remove the hose from a hot engine—coolant spray can cause serious burns. Wear safety glasses. If coolant level drops after a few days, inspect connections and hose for pinhole leaks. Do not ignore drips; a failed bypass hose can overheat the engine rapidly.
Ready to Restore Cooling System Integrity?
Order your OEM-spec 2.2L bypass hose today and eliminate coolant weeping, fluctuating gauges, and thermal risk. Every hose ships brand-new, tested, and backed by our 30-day guarantee. Fit it yourself or have your mechanic handle it—either way, you're restoring factory reliability.
Shop This Hose
Use code 22GET20 for 20% off any 2 items
4.9★ / 12,300+ reviews
30-day money-back guarantee
+44 203 943 9919 (Mon–Fri 9am–7pm)
Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. This product is OEM-spec and compatible—not OEM-original unless explicitly marked. Always verify fitment with your vehicle's VIN before purchase.
```
Oil Cooler Outlet Radiator Hose Bottom to Water Pump For Land Rover LR2 Volvo Thermostat to Radiator Pipe LR005563 005564 005566
from £ 112.06
Victorious Automotive · Land Rover / Volvo Cooling · Radiator Hoses
Premium Engine Cooling Radiator Hose Kit – LR2 / Volvo 3.2L Petrol
Factory-specification coolant hoses engineered to maintain precise engine temperature and prevent overheating under demanding driving conditions.
Land Rover LR2
Volvo S60 / S80 / V60 / XC60 / XC90
2008–2012
3.2L Petrol
Direct Replacement
Rubber Compound
Overview
The cooling system in your Land Rover LR2 or Volvo S60/S80/V60/XC60/XC90 operates under constant thermal stress. Aged or failing radiator hoses compromise coolant circulation, risking engine damage, overheating, and costly repair bills. This premium OE-specification hose kit restores factory-correct flow paths and thermal stability.
We offer three individual hose options or a complete three-piece set, allowing you to replace only what's needed or refresh the entire cooling circuit. Each hose is engineered to Partsmost's exacting OE standards, using high-grade rubber compounds that resist cracking, permeation, and collapse under pressure.
Direct bolt-on fitment. No modifications required. Works seamlessly with stock thermostats, water pumps, and radiators. Backed by 12-month warranty and our 30-day money-back guarantee.
What's Included
🔧
Option A: Oil Cooler Outlet Hose (LR005563)
From oil cooler to main loop. Part No. 30774514.
🔧
Option B: Lower Inlet Hose (LR005564)
Bottom radiator to water pump inlet. Part No. 30774513.
🔧
Option C: Thermostat to Radiator Hose (LR005566)
Engine thermostat to lower radiator. Part No. 30774512.
📦
Complete Set: All Three Hoses
LR005563 + LR005564 + LR005566 for total system refresh.
Product Highlights
OE-Specification Rubber Compound – Resists cracking, permeation, and thermal fatigue
Direct Fit – No modifications; bolt straight onto OEM water pump and radiator ports
Factory Part Numbers – LR005563, LR005564, LR005566 + Volvo interchanges
Pressure-Rated – Engineered to handle peak coolant system pressure safely
Crimped Connections – Secure hose-to-fitting integrity; no leaks or weeping
Temperature Stable – Maintains flexibility from −40°C to +120°C operating range
Proven Reliability – Trusted by Land Rover Freelander LR2 and Volvo owners globally
Easy Identification – Colour-coded and embossed part numbers for quick assembly
Fuel Inert – Rubber formulation resists ethanol and modern fuel additives
12-Month Warranty – Full coverage against manufacturing defects
Vehicle Compatibility
Vehicle
Model Years
Engine
Fit Status
Land Rover Freelander LR2
2008–2012
3.2L Petrol
Direct Fit
Volvo S60
2008–2012
3.2L Petrol
Direct Fit
Volvo S80
2008–2012
3.2L Petrol
Direct Fit
Volvo V60
2008–2012
3.2L Petrol
Direct Fit
Volvo XC60
2008–2012
3.2L Petrol
Direct Fit
Volvo XC90
2008–2012
3.2L Petrol
Direct Fit
Other engines / years
—
Non-3.2L
Not Compatible
Always verify your vehicle VIN and engine code before purchase. We offer free fitment checks: email your VIN to our team at +44 203 943 9919 (Mon–Fri 9am–7pm) or use our online chat.
Installation Guide
Difficulty Level: Intermediate | Time: 1–2 hours
Drain cooling system: Remove radiator cap, open drain plug, and let coolant flow into a drain pan. Dispose responsibly.
Locate hose routes: Identify which hose(s) you're replacing. Consult factory diagrams for port locations and clamp positions.
Loosen hose clamps: Use a flat-head or Phillips screwdriver to unscrew hose clamps at each end of the old hose.
Remove old hose: Gently twist and pull the old hose free from water pump and radiator fittings. Note the routing path.
Fit new hose: Push new hose firmly onto each port until fully seated. Rotate 90° to ensure no stress on clamps.
Secure clamps: Position clamps approximately 6–12 mm from hose end. Tighten evenly (do not over-torque; snug is sufficient).
Refill coolant: Pour fresh 50/50 coolant into radiator until full. Replace radiator cap and run engine at idle for 2–3 minutes.
Check for leaks: Inspect each clamp connection and hose body for seeping. Top up coolant level if required.
Reset heater: Turn on climate control to purge air locks from the system. Allow engine to reach operating temperature before driving.
Important: Allow engine to cool completely before beginning work. Hot coolant can cause severe burns. Dispose of old coolant at an approved recycling centre—never pour down drains. Keep antifreeze away from children and pets.
Ready to Restore Cooling Reliability?
OE-specification hoses. Factory part numbers. 12-month warranty. Order your radiator hose kit today and enjoy peace of mind knowing your LR2 or Volvo cooling system is operating at peak efficiency.
Shop Radiator Hose Kit
Use code 22GET20 for 20% off any 2 items.
✓ 30-day money-back guarantee
✓ 4.9★ rated – 12,300+ verified reviews
✓ Fast worldwide shipping – DHL, FedEx, UPS, TNT
✓ Expert support – +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist and is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar Land Rover (JLR), Volvo, or any OEM manufacturer. All vehicle names and logos are trademarks of their respective owners. Product compatibility and fitment are provided as guidance only; always verify VIN and engine code before purchase. We are not responsible for incorrect fitment or modifications made to vehicles.
3.2L Petrol Radiator Coolant Hose Lower / Upper for Land Rover Freelander LR2 2008-2012 OE quality Top LR000931 Bottom LR007413
from £ 224.11
```html
Victorious · Land Rover Freelander LR2 · Cooling System
Radiator Coolant Hose Upper & Lower for Land Rover Freelander LR2 2008–2012
OE-quality replacement cooling hoses engineered for reliable thermal management in your Freelander L359.
L359 / LR2
2008–2012
3.2L Petrol
OE Quality
Direct Fit
12-Month Warranty
Overview
Your Land Rover Freelander LR2 (L359) relies on a precise cooling system to maintain optimal operating temperature during demanding terrain and extended driving. The radiator coolant hoses are critical components that circulate coolant between the engine block and radiator, and degradation can lead to overheating, loss of performance, and costly engine damage.
These OE-quality replacement hoses restore full cooling efficiency. Available as upper (LR000931) or lower (LR007413) units, they are manufactured to exact OEM specifications and engineered from durable rubber compound resistant to high-temperature coolant flow and engine vibration. Each hose features precision-molded fittings that mate perfectly with your L359's intake and outlet ports.
Whether you're addressing visible cracks, weeping seals, or preventative maintenance ahead of an expedition, these hoses deliver the same thermal performance as factory originals—with the reassurance of a 12-month warranty and our 30-day money-back guarantee.
What's Included
🔧
Upper or Lower Hose
Choose your configuration at checkout
✓
OE-Spec Fittings
Factory-matched connectors
📋
Installation Guide
Step-by-step fitment instructions
🛡️
12-Month Warranty
Full peace of mind coverage
Product Highlights
OE-quality rubber compound rated for sustained high-temperature coolant circulation
Upper (LR000931) and Lower (LR007413) variants available separately
Precision-molded connectors ensure factory-perfect fitment with zero leaks
Direct replacement—no cutting, splicing, or adapter brackets required
Cross-references: RAPRO 14226, THERMOTEC DWI025TT, VAICO V48-0125
Resistant to coolant degradation, UV damage, and engine vibration fatigue
Manufactured to Portuguese origin OEM specifications
Compatible with 3.2L petrol engines throughout the 2008–2012 production run
Sold individually—order both upper and lower for a complete cooling system overhaul
Full 12-month manufacturer warranty included with every purchase
Compatibility
Model
Years
Engine
Upper Hose
Lower Hose
Land Rover Freelander LR2 (L359)
2008–2012
3.2L Petrol
✓ Direct Fit
✓ Direct Fit
Part Numbers: Upper: LR000931 | Lower: LR007413, LR005294
Cross References: 6G918286RC, 6G918286RD, GATES 05-3039
Installation
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect the negative battery terminal and allow the engine to cool completely (minimum 30 minutes).
Raise and secure the vehicle on jack stands; remove undertray if necessary for lower hose access.
Position a drain pan beneath the radiator. Loosen the radiator drain plug and allow coolant to drain into the pan.
Identify the hose to be replaced (upper runs from thermostat housing to radiator top inlet; lower runs from radiator outlet to water pump).
Loosen hose clamps at both ends using a hose clamp tool or flathead screwdriver; slide clamps clear of the connection points.
Gently twist and separate the old hose from its fittings. Note the routing path for correct reinstallation.
Clean both connection ports with a soft cloth to remove any scale or debris; inspect rubber seals on the fitting ends.
Slide hose clamps onto the new hose approximately 1 inch from each end.
Press the new hose fully onto both fittings, rotating slightly to ensure complete seating. Clamps should sit approximately 0.25 inch from the hose end.
Tighten clamps in a cross pattern (if two clamps per hose) to 18–22 Nm (13–16 ft·lb)—snug but not over-tightened, which can crush the hose.
Refill the radiator with coolant (50/50 mix of Pentosin or equivalent and distilled water); top up the expansion tank to the MAX line.
Start the engine and allow it to reach operating temperature. Check for leaks around both connection points and the drain plug.
Turn off the engine, allow it to cool, and top up the expansion tank again to ensure proper fluid level.
⚠️ Important: Always use fresh 50/50 premixed coolant (Pentosin or equivalent). Never reuse drained coolant, as it may contain contaminants. Ensure hose clamps are snug but not over-tightened; excessive force can split the hose. If coolant leaks after installation, stop the engine immediately and allow it to cool before rechecking clamp tightness.
Ready to Restore Cooling System Reliability
Don't let a failing coolant hose sideline your Freelander. These OE-quality hoses restore thermal management precision and are backed by our 12-month warranty and 30-day money-back guarantee. Shop with confidence.
Add to Cart
Use code 22GET20 for 20% off any 2 items
4.9★ Rated by 12,300+ owners
30-Day Money-Back Guarantee
Worldwide DHL, FedEx, UPS, TNT
+44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket parts specialist and is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. Product names, logos, and trademarks are the property of their respective owners and are used for identification purposes only. All parts are OE-quality replacements designed for direct fitment to the specified vehicle and model years.
```
Genuine 3.0L TDV6 Radiator Upper Coolant Hose For Land Rover Discovery LR4 Range Rover Sport Coolant Top Pipe LR043326 LR095544
from £ 245.08
```html
Victorious · Land Rover Discovery / Range Rover Sport · Cooling System
Genuine 3.0L TDV6 Radiator Upper Coolant Hose – Discovery IV & Range Rover Sport
OEM direct replacement upper radiator hose for diesel Discovery IV LR4 and Range Rover Sport with TDV6 engine. Restores original cooling circuit integrity.
Discovery IV / LR4
Range Rover Sport L320
2010–2016
3.0L TDV6 Diesel
OEM Quality
Direct Fit
Overview
Land Rover Discovery IV (LR4) and Range Rover Sport owners running the 3.0L TDV6 diesel engine depend on a robust cooling system to manage heat and maintain engine stability in demanding terrain and traffic. The upper radiator hose is a critical component—it channels hot coolant from the engine head directly to the radiator where heat is expelled.
This is a genuine OEM replacement upper coolant hose, part numbers LR043326 / LR095544. It's engineered to precise Land Rover specifications with proper diameter, wall thickness, and reinforcement to withstand the pressure cycles and thermal stress of repeated engine cycles. Unlike universal hoses, this part integrates seamlessly into your vehicle's cooling circuit without modification.
If your current hose shows signs of age—weeping coolant, splits, hardening, or visible cracks—replacement is essential. A failing hose can lead to overheating, loss of coolant, and potential engine damage. This genuine part restores your cooling system to factory reliability.
What's Included
🔧
Upper Radiator Hose
1x OEM TDV6 hose assembly
✓
Direct Fit
No adapters or modifications needed
📋
Factory Spec
Meets Land Rover engineering standards
🛡️
6-Month Warranty
Peace of mind on parts and labor
Product Highlights
OEM equivalent hose—matches factory construction and performance
Premium rubber compound resists thermal cycling and coolant degradation
Reinforced walls handle system pressure without deformation or splits
Upper position hose—services engine head to radiator circuit
Fits 2010+ Discovery IV (LR4) with TDV6 diesel
Fits 2010+ Range Rover Sport L320 with TDV6 diesel
Part numbers LR043326 / LR095544 verified compatibility
Brand new stock—not remanufactured or used
No modifications or adapters required for installation
Backed by 6-month manufacturer's warranty
Compatibility
Vehicle
Engine
Years
Status
Land Rover Discovery IV (LR4)
3.0L TDV6 Diesel
2010–2016
Direct Fit
Range Rover Sport L320
3.0L TDV6 Diesel
2010–2016
Direct Fit
Discovery IV (Petrol variants)
4.0L / 5.0L Petrol
2010–2016
Not Compatible
Range Rover Sport (Petrol variants)
3.0L / 5.0L Petrol
2010–2016
Not Compatible
Verify before purchase: Cross-reference your vehicle's VIN and original hose part number with LR043326 or LR095544. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your registration details.
Installation
Difficulty Level: Intermediate | Time: 1–2 Hours
Prepare: Allow engine to cool completely. Park on level ground. Disconnect the negative battery terminal.
Drain coolant: Open the radiator drain plug at the base and catch coolant in a clean container. Refer to your service manual for exact location and drain volume (typically 8–10 liters).
Remove old hose: Loosen hose clamps at the engine manifold and radiator inlet using a hose clamp pliers or screwdriver. Gently twist and pull the old hose free. Note routing and clamp positions.
Install new hose: Insert the new hose into the same routing path. Ensure no kinks or sharp bends. Reinstall clamps and tighten firmly—hand-tight plus a quarter turn. Do not over-clamp.
Refill coolant: Refill with fresh Land Rover coolant mix (typically 50/50 coolant to distilled water). Fill the radiator, expansion tank, and bleed air by gently squeezing the hose while engine is at temperature (use caution—hot coolant).
Test: Restart engine, check for leaks around clamps and connection points. Monitor temperature gauge. Top up expansion tank as needed.
Reconnect battery: Reinstall negative terminal and clear any diagnostic codes if present.
⚠️ Important: Never work on a hot engine or pressurized cooling system. Coolant is toxic—dispose of used coolant responsibly at an authorized recycling center. If you're unsure about any step, have a qualified Land Rover technician perform the work.
Ready to Restore Your Cooling System?
A genuine upper radiator hose keeps your TDV6 running cool under load. Order now and receive 30 days to inspect and confirm fitment with our money-back guarantee.
Shop Discovery IV & Sport Parts
Use code 22GET20 for 20% off any 2 items.
4.9★ from 12,300+ reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL / FedEx shipping
✓ Expert phone support: +44 203 943 9919
Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or a subsidiary of Jaguar Land Rover Ltd., Range Rover, Land Rover, or any manufacturer. All vehicle names, logos, and part numbers are used for identification and compatibility purposes only. This product is OEM equivalent and meets factory specifications but is not an official Land Rover or Jaguar Land Rover product.
```
Thermostat Housing Kit for Land Range Rover Sport Discovery LR3 4 2.7 3.0 Diesel Jaguar XF Water Outlet Pipe 4H2Q8592BF LR073372
from £ 87.87
```html
Victorious · Land Rover · Cooling System
Thermostat Housing & Water Outlet Pipe Kit – Discovery LR3/LR4 · Range Rover Sport · Jaguar XF
OEM-equivalent cooling system replacement engineered for Land Rover TDV6 diesel engines and Jaguar 3.0D platforms.
LR073372
4H2Q8592BF
2004–2018
2.7–3.0 Diesel
Direct Fit
PP Housing
Overview
If you own a Discovery LR3, LR4, Range Rover Sport, or Jaguar XF with the TDV6 2.7 or 3.0-litre diesel engine, the thermostat housing and water outlet pipe assembly is a critical cooling system component. This part regulates engine coolant flow and temperature management—essential for diesel engine longevity and reliability in both road and off-road conditions.
Our thermostat housing kit is engineered to match OEM specifications, replacing Jaguar XF, Land Rover Discovery, and Range Rover units that have failed, cracked, or degraded. The polypropylene (PP) construction resists thermal stress and corrosion, and the direct-fit design eliminates fitment confusion and installation guesswork.
Worn or failed housings lead to coolant leaks, overheating, and potential engine damage. This kit restores factory cooling performance and is backed by our 30-day money-back guarantee and 12-month manufacturer's warranty.
What's Included
🔧
Thermostat Housing Assembly
PP polymer, OEM-spec design
🔌
Water Outlet Pipe
Integral coolant routing component
📏
Precision-Fit Dimensions
18cm L × 16cm W × 12cm H
✅
Quality Assurance
12-month warranty included
Product Highlights
OEM-equivalent engineering—replaces LR073372, 4H2Q8592BF, JDE3972, and 1357091
Polypropylene (PP) construction resists thermal cycling and chemical corrosion
Direct-fit design—no modifications, adapters, or custom work required
Compatible with 2.7 TDV6 and 3.0 SD/TDV6 diesel engines
Proven compatibility with Land Rover, Jaguar, and OEM platforms
Compact, lightweight design—weight 0.3 kg for easy handling
Factory cooling flow specifications maintained
Eliminates coolant seepage and overheat risk
Straightforward R&R installation—no special tools needed
Backed by 30-day money-back guarantee and 12-month warranty
Compatibility
Vehicle
Year Range
Engine
Fit
Land Rover Discovery Mk3 (LR3)
2004–2009
2.7 TDV6
Direct Fit
Land Rover Discovery Mk4 (LR4)
2009–2018
2.7 / 3.0 TDV6
Direct Fit
Land Rover Range Rover Vogue
2013+
3.0 SD / TDV6
Direct Fit
Land Rover Range Rover Sport L494
2014+
2.7 / 3.0 TDV6
Direct Fit
Jaguar XF
2008+
3.0 Diesel
Direct Fit
Jaguar XJ
2009+
3.0 Diesel
Direct Fit
Jaguar S-Type
2002–2007
2.7 Diesel
Direct Fit
Always verify your OEM part number before ordering. Cross-reference your existing housing with the list above: LR073372, 4H2Q8592BF, JDE3972, 1357091, 1316061, 1331447, or C8W0A. If unsure, contact us with your VIN.
Installation Notes
Difficulty: Intermediate | Time: 1.5–2 hours
Prepare: Allow engine to cool completely. Disconnect negative battery terminal and remove engine cover if equipped.
Drain coolant: Open radiator petcock and drain coolant into a container. Catch and dispose of properly.
Remove old housing: Unbolt the thermostat housing from its mounting points (typically 2–3 bolts). Disconnect coolant hoses and electrical connectors.
Clean mounting surface: Wipe the engine block mounting face with a lint-free cloth. Remove old gasket material.
Install new housing: Position the new assembly and hand-tighten bolts. Torque to 25 Nm (18 ft-lb) in a cross pattern.
Reconnect hoses: Reattach coolant inlet and outlet hoses. Ensure clips are secure.
Refill coolant: Use OEM-approved Land Rover or Jaguar coolant (50/50 mix). Bleed air by running engine at idle for 2–3 minutes.
Test: Check for leaks. Monitor temperature gauge for 15 minutes of gentle driving.
Important: Do not reuse old coolant unless it is less than two years old and has been stored properly. Diesel engines run hotter; use only approved coolant to prevent cavitation and corrosion.
Ready to Restore Cooling Performance?
This thermostat housing kit is engineered for Land Rover Discovery, Range Rover, and Jaguar XF diesel owners who demand reliability. Backed by our 30-day money-back guarantee and UK support.
Shop Thermostat Housing Kit
Use code 22GET20 for 20% off when you order 2 or more items.
12,300+ verified reviews
4.9/5 stars
30-day money-back
Worldwide DHL · FedEx · UPS
Mon–Fri 9am–7pm +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist. We are not affiliated with or endorsed by Jaguar Land Rover, Land Rover, Jaguar, or any OEM brand. All product names and trademarks are the property of their respective owners. This product is designed to be compatible with the specified vehicles and uses OEM-equivalent engineering. Always verify fitment before purchase.
```
Engine Coolant Water Pump Pipe Feed Line to Cylinder Head Inlet Tube For Mercedes W203 C230 2003 to 2005 A2712001152 2712001552
£ 251.58
```html
Victorious · Mercedes · Cooling System
Engine Coolant Water Pump Inlet Tube – Mercedes W203 C230
OE-spec PA66 feed line restores cooling system integrity on 2003–2005 C230 Kompressor models.
W203 C230
2003–2005
PA66 GF30
Direct Fit
OEM Part
Overview
The Mercedes-Benz W203 C230 Kompressor (2003–2005) relies on a precision coolant feed system to maintain thermal stability in its 1.8L supercharged petrol engine. Over time, the PA66 reinforced nylon inlet tube connecting the water pump to the cylinder head can develop micro-fractures, leaks, or complete failure—leading to coolant loss, overheating, and potential engine damage.
This OE-specification water pump inlet feed line (part numbers A2712001152 and A2712001552) is manufactured to original equipment tolerances using glass-filled PA66 composite. It delivers coolant from the water pump to the cylinder head inlet port with zero deviation from factory performance. Direct fit, no modification required.
Whether you're addressing an active leak, preventative maintenance on a high-mileage C230, or restoring a cooling system rebuild, this component restores confidence and cooling efficiency to your engine bay.
What's Included
📦
Water Pump Feed Pipe
OE-spec inlet tube, ready to install
🔧
Direct Fit Design
No adapters, modifications, or fabrication
✓
Factory Fitment
38cm length, 12cm width, engineered to spec
🛡️
1-Year Warranty
Full manufacturer coverage included
Product Highlights
PA66 GF30 Material: Glass-filled nylon rated for 100°C+ coolant temps
Dual Part Numbers: Fits A2712001152 and A2712001552 applications
Zero Coolant Weeping: Precision-molded connections eliminate micro-leaks
Thermal Stability: Resists embrittlement and micro-fracture over time
OEM Quality Control: Meets Mercedes factory specifications exactly
W203 C230 Only: 2003, 2004, 2005 Kompressor models (all variants)
1.8L Petrol Engine: Supercharged four-cylinder fitment verified
Quick Swap: Typical installation time 30–45 minutes with basic tools
Preventative Upgrade: Install during water pump or thermostat service
Two Packaging Options: Type A (loose) or Type B (plastic-wrapped)
Compatibility Table
Vehicle Model
Year Range
Engine
Status
Mercedes C230 Kompressor Classic Sedan
2004–2005
1.8L Supercharged
Direct Fit
Mercedes C230 Kompressor Coupe
2003–2005
1.8L Supercharged
Direct Fit
Mercedes C230 Kompressor Elegance Sedan
2004–2005
1.8L Supercharged
Direct Fit
Mercedes C230 Kompressor Sport Sedan
2004–2005
1.8L Supercharged
Direct Fit
Mercedes C230 Kompressor Sedan
2003–2005
1.8L Supercharged
Direct Fit
W203 C-Class (all other engines)
2003–2005
2.0L, 2.6L, 3.2L
Not Compatible
W202 C-Class (previous generation)
1993–2001
All
Not Compatible
Installation Notes
Difficulty: Intermediate | Time: 30–45 minutes
Coolant System Drain: Allow engine to cool fully. Place a catch pan beneath the radiator lower hose. Open the radiator drain valve and drain coolant completely. (Disposal: recycle used coolant at an auto parts store or mechanic facility.)
Water Pump Access: Remove the serpentine belt tensioner and belt to expose the water pump and inlet tube assembly. Unbolt the pump from the timing cover.
Remove Old Feed Pipe: Disconnect the cylinder head inlet connection (upper hose clip). Unbolt the tube bracket from the engine block. The tube should pull free with gentle twisting—do not force.
Install New Feed Line: Position the new tube so both ends align with the water pump outlet and cylinder head inlet port. Hand-tighten all clips and bolts; check alignment before final torquing.
Torque Specification: Tighten mount bolts to 8–10 Nm (6–7 lb-ft). Do not over-tighten; PA66 can crack under excessive load.
Refill Coolant System: Close the radiator drain. Fill the radiator and expansion tank with OEM coolant (typically MB 325.3 spec). Bleed air from the system by running the engine at idle with the cap off until steady coolant flow is observed.
System Pressure Test: Install radiator cap and run the engine to 80°C. Monitor for leaks at all connection points. Recheck after 5 minutes at operating temperature.
Belt Reassembly: Reinstall the serpentine belt and tensioner. Verify all belt edges are properly seated.
⚠ Important: Coolant is toxic. Dispose of drained fluid responsibly and keep it away from children and pets. Do not tighten connections beyond hand-tight plus a quarter turn; the PA66 tube can split under over-torque. If coolant seeps after installation, loosen the clip slightly and re-seat the connection—do not add sealant to this assembly.
Ready to Restore Your C230's Cooling System?
This OE-spec inlet feed tube is the foundation of a reliable coolant circuit on your 2003–2005 Mercedes W203 C230 Kompressor. Order now and install with confidence—backed by our 30-day money-back guarantee and lifetime technical support.
Shop Now
Use code 22GET20 for 20% off any 2 items.
⭐ 4.9/5 from 12,300+ reviews
🚚 Worldwide DHL, FedEx, UPS shipping
📞 UK support: +44 203 943 9919
Victorious Automotive is not affiliated with Mercedes-Benz, Daimler AG, or Jaguar Land Rover. All product names, logos, and trademarks are the property of their respective owners. This description is provided for compatibility reference only and does not imply endorsement or warranty from the OEM manufacturer.
```
GENUINE 2.0 TURBO PETROL EXPANSION TANK LOWER HOSE FOR LAND ROVER RANGE ROVER EVOQUE 2012-2018 DISCOVERY SPORT LR024241 LR035435
£ 261.10
Victorious · Range Rover Evoque / Discovery Sport · Cooling System
2.0L Turbo Petrol Expansion Tank Lower Hose
OEM-specification coolant hose engineered for perfect fit and reliable thermal control on your Evoque or Discovery Sport.
L538 / L551 / L550
2012–2018+
2.0 Turbo Petrol
Direct Fit
Rubber Hose
LR024241 / LR035435
Why This Hose Matters
The expansion tank lower hose on your Range Rover Evoque (2012–2018) or Discovery Sport (2015+) handles constant thermal cycling under pressure. When the original fails—cracking, leaking, or becoming brittle—coolant escapes, temperatures spike, and engine protection collapses. This genuine OEM-spec hose restores full cooling circuit integrity without compromise.
We stock this part because Evoque and Discovery Sport owners depend on reliable cooling in all climates, from desert heat to daily commute stress. Whether you're managing a slow weep or a catastrophic failure, this direct-replacement hose gets you back to baseline immediately.
Manufactured to original equipment specifications using automotive-grade rubber compound and precise fitment geometry, it resists high-temperature degradation and maintains pressure seal integrity across the full operating range of your 2.0L turbocharged petrol engine.
What's Included
🔧
1 × Expansion Tank Lower Hose
Direct fit, ready to install
✓
OEM Part Numbers Included
LR024241 & LR035435
📋
Installation Guide
Step-by-step instructions
🛡️
12-Month Warranty
Full coverage included
Product Highlights
OEM-specification material and fitment geometry
Engineered for 2.0L turbocharged petrol engines
Direct bolt-on installation—no modification required
High-temperature rubber resistant to thermal cycling
Maintains full pressure seal integrity
Dual OEM part numbers supported (LR024241 & LR035435)
Lower front placement for straightforward access
Automotive-grade material—no cost-cut substitutes
Backed by 12-month warranty
30-day money-back guarantee (Victorious Automotive)
Compatibility & Fitment
Vehicle Model
Years
Engine
Fitment
Range Rover Evoque (L538)
2012–2018
2.0L Turbo Petrol
Direct Fit
Discovery Sport (L550)
2015–Present
2.0L Turbo Petrol
Direct Fit
Range Rover Evoque (L551)
2019+
2.0L Turbo Petrol
Not Compatible
Discovery (All Models)
Any
Diesel Only
Not Compatible
How to verify fit: Check your part number against LR024241 or LR035435. If unsure, provide your VIN or current part number and we'll confirm compatibility within 24 hours. Contact support@victorious.shop or call +44 203 943 9919 (Mon–Fri, 9am–7pm GMT).
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
Disconnect the battery negative terminal and allow the cooling system to cool completely (minimum 30 minutes after engine shutdown).
Locate the expansion tank on the driver's side of the engine bay—it's translucent plastic with a filler cap and gauge markings.
Open the coolant drain plug at the radiator base and partially drain the system into a clean container to below hose level (no need to empty entirely).
Identify the lower hose connection running from the expansion tank to the radiator inlet or water pump housing.
Remove the hose clamp using a flathead screwdriver or hose clamp pliers, then slide the old hose free. Note: Expect minimal residual coolant spillage—have absorbent cloth ready.
Slide the new hose onto the connection points, pushing firmly until the hose seats fully (you should feel it reach the barbed fitting).
Reinstall the hose clamp and tighten to 8–10 Nm (6–7 ft-lbf)—snug but not over-tightened, which can crack the barb.
Refill the coolant with OEM Land Rover coolant (Motorcraft or equivalent) to the "MAX" line on the expansion tank.
Reconnect the battery negative terminal and start the engine. Allow it to idle for 2–3 minutes, watching for drips or leaks at both hose connections.
Perform a visual inspection once the engine reaches operating temperature (fan cycles on). Check for seeping or spray. Top up if needed.
⚠ Important: Never remove the expansion tank cap or radiator cap when the engine is hot—pressure release can cause severe burns. Always work on a cool system. If you encounter corrosion or difficulty removing the old hose, apply penetrating oil (5–10 minutes) before attempting removal. Do not reuse old hose clamps; discard and fit new stainless-steel clamps if originals show rust or damage.
Why Choose Victorious Automotive
We're enthusiasts who work exclusively with Land Rover, Range Rover, and Defender vehicles. Every part we stock—including this cooling hose—is selected for OEM authenticity, tested fitment, and real-world durability. Our 4.9-star rating across 12,300+ verified reviews reflects years of getting these details right.
We ship globally via DHL, FedEx, UPS, and TNT. UK orders arrive within 2–3 working days. Your purchase includes a 30-day money-back guarantee and 12-month warranty on all parts.
Ready to Restore Cooling Circuit Integrity
Don't limp through hot weather with a failing coolant hose. This OEM-spec part reinstates full thermal protection and peace of mind for your Evoque or Discovery Sport.
Shop Expansion Tank Lower Hose
Order two or more items and apply code 22GET20 at checkout for 20% off your entire order.
✓ 30-Day Money-Back
✓ 12-Month Warranty
✓ Worldwide Shipping
✓ 4.9★ Rated
Questions? Call us at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT) or email support@victorious.shop. Our team is ready to confirm fitment or discuss your cooling system.
Victorious Automotive is an independent aftermarket retailer. We are not affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, Discovery, Evoque, or any OEM manufacturer. All product names, logos, and brands are property of their respective owners. This description is provided for reference only and does not constitute an official product guide. Please verify fitment using your VIN or current part number before purchase. Improper installation may void your vehicle's warranty. Always consult your owner's manual for technical specifications and service intervals.
2.0 PETROL THERMOSTAT WATER OUTLET CONNECTOR FOR LAND ROVER FREELANDER LR2 EVOQUE DISCOVERY SPORT LR038758 VOLVO V60 70 31422105
£ 285.88
```html
Victorious · Cooling System · Engine Components
2.0L Petrol Thermostat Water Outlet Connector
OEM-specification coolant housing for Land Rover Freelander, Range Rover Evoque, Discovery Sport, Volvo, and Ford 2.0 petrol engines—direct-fit replacement with 12-month warranty.
LR038758
31422105
Cooling System
2.0L Petrol
Direct Fit
OEM-Spec
Overview
The thermostat water outlet connector is a critical junction point in your vehicle's cooling circuit. This component directs hot coolant from the engine block through the thermostat housing and toward the radiator, maintaining optimal operating temperature under all driving conditions. A failing outlet connector can cause coolant leaks, poor temperature regulation, and engine overheating.
Victorious supplies genuine OEM-specification water outlet connectors engineered to exact factory tolerances. This unit is compatible across a broad range of 2.0L petrol-powered Land Rover, Volvo, Ford, and Lincoln vehicles. Each connector undergoes rigorous testing to ensure pressure integrity and thermal stability.
Whether you're addressing a known coolant leak or performing preventative cooling system maintenance, this direct-fit replacement eliminates guesswork and restores cooling system reliability. Backed by a 12-month guarantee and shipped worldwide via DHL or FedEx, it's the straightforward solution for serious vehicle owners.
What's Included
🔧
Water Outlet Connector
Single OEM-spec unit, ~0.2kg
📋
Fitment Guide
Vehicle compatibility reference
✔
12-Month Warranty
Parts defect coverage
🌍
Global Shipping
DHL, FedEx, UPS, TNT
Product Highlights
OEM-equivalent design and material composition
Manufactured to original equipment specifications
Perfect fit with factory cooling hose interfaces
Rated for full system operating pressure
Stable thermal performance across all ambient conditions
Fast, straightforward installation—no modifications required
High reliability under sustained engine load
Compatible with Partsmost OE-quality aftermarket parts
German-origin engineering and production
No hazardous chemicals; environmentally compliant
Compatibility Chart
Vehicle Model
Years
Engine
Fit Status
Land Rover Freelander / LR2
2006–2014
2.0L Petrol
Direct Fit
Range Rover Evoque
2012+
2.0L Petrol
Direct Fit
Land Rover Discovery Sport
2015+
2.0L Petrol
Direct Fit
Volvo V60 / V70 / S60 / S80 / S80L
2010+
2.0L Petrol
Direct Fit
Ford Edge / Escape / Explorer / Focus / Fusion / Taurus
2009–2018
2.0L EcoBoost
Direct Fit
Lincoln MKC / MKT / MKZ
2013+
2.0L Petrol
Direct Fit
Verify Fitment: Always confirm your vehicle's part number (LR025564, LR038758, 31422105, or CJ5Z8K556A) before purchase. If unsure, contact our team with your VIN at +44 203 943 9919 (Mon–Fri 9am–7pm GMT).
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
Safety first: Allow the engine to cool completely. Disconnect the negative battery terminal.
Drain coolant: Place a catch pan under the radiator drain plug. Open the plug and allow the system to empty fully.
Locate the outlet: The water outlet connector sits on top of the engine block, typically near the thermostat housing. Consult your vehicle service manual for exact location.
Disconnect hoses: Carefully disconnect the upper radiator hose and any other coolant lines connected to the outlet housing. Note hose positions for reassembly.
Remove fasteners: Unbolt the outlet connector from the engine block (typically 2–3 bolts). Remove the old gasket and clean the sealing surface with a lint-free cloth.
Install new connector: Position the new outlet connector with a fresh gasket. Torque bolts to factory specification (generally 20–25 Nm). Do not over-tighten.
Reconnect hoses: Reattach all cooling lines in their original positions. Ensure hose clamps are tight but not crushed.
Refill coolant: Fill the radiator and expansion tank with the correct coolant type for your vehicle. Check your owner's manual for specification (e.g., Ford orange, Volvo blue).
Bleed air: Start the engine and allow it to idle until the thermostat opens and coolant circulates. Check for leaks at the new connector.
Final check: Once cool, top up any coolant loss. Reinstall any covers or trim panels.
Important: Never open the radiator cap or cooling system when the engine is hot—risk of severe burns. Use only OEM-approved or equivalent coolant; mixing types can cause corrosion and blockage. If you are uncertain about any step, consult a Land Rover or Ford specialist.
Complete Your Cooling System Overhaul
Restore cooling system integrity with this OEM-specification water outlet connector. Fast shipping, 12-month warranty, and expert support—all at competitive rates. Order today and use code 22GET20 for 20% off any two items.
Shop Now
✓ 4.9/5 stars | 12,300+ reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL, FedEx, UPS shipping
✓ Phone support: +44 203 943 9919
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), Volvo, Ford, or Lincoln. All brand names and model designations are used for reference only. Product fitment is based on OEM part numbers and technical specifications. Always verify compatibility with your specific vehicle before purchase.
```
Water Pump For 3.0L V6 5.0L V8 Engine Discovery 4 Range Rover Sport Jaguar XF XJ XE XK XJR XFR XKR LR073711 C2Z31587 LR097165 OE
£ 763.47
Victorious · Range Rover Sport · Cooling System
Engine Water Pump for Range Rover Sport L494 & Discovery 4
OE-specification coolant circulation pump for 3.0L V6 and 5.0L V8 engines—engineered for reliability and thermal stability.
L494 / L461 / L405
Discovery 4
2010–2017
V6 / V8
Metal Housing
Direct Fit
Overview
The water pump is the heart of your Land Rover's cooling system. A failing pump leads to overheating, head gasket damage, and catastrophic engine failure. This OE-specification replacement maintains the exact flow rate and pressure curves your engine demands—whether you're pushing your Range Rover Sport L494 through a Scottish winter or cruising across Discovery 4 terrain.
Built to Jaguar Land Rover engineering standards, this pump is precision-cast metal with a sealed bearing assembly and includes the gasket you need for immediate installation. It's a direct physical and functional replacement for OE part numbers LR073711, LR097165, C2Z31587, and LR033993.
Whether your original pump is cavitating (making noise), leaking from the weep hole, or showing signs of performance loss, this unit restores full cooling capacity and prevents secondary damage to your radiator and hoses.
What's Included
💧
Water Pump Assembly
OE-spec sealed bearing, aluminum/iron housing
🔧
Engine Gasket
OE paper gasket, pre-fitted for immediate use
📋
Installation Guide
Fitment cross-reference and torque specifications
✅
12-Month Warranty
Manufacturing defect coverage, parts & labor
Product Highlights
OE-Equivalent Flow & Pressure Curves — Precision-balanced impeller ensures factory cooling performance
Sealed Bearing Assembly — Lifetime-rated sealed bearing eliminates premature wear and leaks
Metal Housing Construction — Cast iron/aluminum body resists corrosion and thermal cycling
Pre-Fitted Gasket — OE paper gasket included; no delays sourcing fasteners
Direct Bolt-In Fit — No modifications; mounts to original engine attachment points
5.0L V8 & 3.0L V6 Compatible — Works across both powerplant options in your model year
Prevents Head Gasket Failure — Maintains stable coolant temps; avoids secondary engine damage
12-Month Part Warranty — Covers manufacturing defects; full refund or replacement
Tested Against OE Standards — Cross-checked against LR specifications before shipment
Worldwide Shipping — DHL, FedEx, UPS to your door in 3–7 business days
Compatibility Chart
Vehicle
Year
Engine
Fit Status
Range Rover Sport L494
2010–2017
3.0L V6 / 5.0L V8
Direct Fit
Range Rover Vogue L405
2010–2017
3.0L V6 / 5.0L V8
Direct Fit
Land Rover Discovery 4
2010–2016
3.0L V6 / 5.0L V8
Direct Fit
Jaguar XF
2010–2017
3.0L V6
Direct Fit
Jaguar XJ
2010–2017
3.0L V6 / 5.0L V8
Direct Fit
Jaguar XK / XKR
2010–2015
5.0L V8
Direct Fit
Jaguar F-Type
2014–2017
3.0L V6 / 5.0L V8
Direct Fit
OE Part Cross-Reference: LR010801 · LR033993 · LR068999 · LR073711 · LR097165 · C2Z31587 · DP1871
Installation Notes
Difficulty Level: Intermediate | Time: 1.5–2.5 hours
Drain the Cooling System — Allow engine to cool fully. Open radiator cap and drain coolant into a clean container for reuse or recycling.
Remove Auxiliary Components — Unbolt serpentine belt tensioner, air intake hose, and radiator upper hose (varies by engine configuration).
Unbolt the Old Pump — Remove 4–6 bolts securing pump to engine block. Note bolt lengths and positions for reassembly.
Install New Gasket — Discard old gasket. Clean mounting surface with a soft brush; seat new OE gasket flat against engine block.
Mount the New Pump — Align pump inlet with block passage. Insert and hand-tighten all bolts, then torque to OE spec (typically 18–22 Nm).
Reconnect Hoses & Components — Refasten radiator upper hose, intake hose, and tensioner. Do not overtighten or cross-thread.
Refill & Bleed — Pour fresh coolant into radiator until full. Run engine at idle for 3–5 minutes; top up as air purges from the system.
Check for Leaks — Inspect pump outlet and gasket line for seepage over the first 10 minutes of running. Small drips are normal during initial circulation.
⚠️ Important: Always work with a cool engine. Pressurized coolant can cause severe burns. If you are not confident with bolt torque values or hose routing, consult your official Jaguar Land Rover service manual or contact our technical support team at +44 203 943 9919.
Ready to Restore Cooling Performance?
Prevent overheating, head gasket failure, and catastrophic engine damage. This OE-specification water pump is engineered to the same standards as the original—backed by 12 months of warranty and a 30-day money-back guarantee.
Shop Water Pump
Use code 22GET20 for 20% off when you order any 2 items.
✓ 12,300+ Verified Reviews
4.9/5 Stars
30-Day Returns
Worldwide Shipping
Expert Support
Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover, Land Rover, Range Rover, or any official JLR division. All product names, logos, and brands are the property of their respective owners. This product is a direct-fit replacement part engineered to OE specifications and is compatible with vehicles listed above. Always verify fitment with your vehicle's VIN before purchase.
3.0 DIESEL ENGINE INTERCOOLER FOR LAND ROVER RANGE ROVER 2013- RANGE ROVER SPORT 2014- ALL NEW DISCOVERY V L462 2017- LR062405
£ 582.36
```html
Victorious · Diesel Engines · Cooling System Parts
3.0 Diesel Engine Intercooler for Range Rover & Discovery
Premium OEM-spec intercooler engineered to restore thermal efficiency and power delivery across your diesel-powered Land Rover platform.
Range Rover L405
Range Rover Sport L494
Discovery 5 L462
2013–2020
Cooling System
OEM LR062405
3.0 TDV6 / SD6
Overview
The 3.0-litre TDV6 and SD6 diesel engines found in your Range Rover L405, Range Rover Sport L494, and Discovery 5 L462 demand precision cooling to maintain peak performance and reliability. Over time, intercooler efficiency degrades—leading to elevated intake air temperatures, reduced power output, and increased strain on the engine.
This OEM-specification intercooler (part number LR062405) is engineered to original Land Rover factory standards. It restores optimal charge air cooling, bringing air temps back down to factory parameters before compression enters the combustion chamber. The result: restored throttle response, improved fuel economy, and sustained engine longevity.
Built to exact OEM dimensions with genuine core construction, this intercooler is a direct bolt-on fit. No modifications. No compromises. Just straightforward diesel engine revival for Land Rover owners who expect reliability as standard.
What's Included
📦
Intercooler Assembly
OEM-spec core, factory hose fittings
✓
Fitment Guarantee
100% direct fit, L405/L494/L462
🛡️
12-Month Warranty
Coverage against manufacturing defects
📄
Installation Guide
Step-by-step fitment instructions
Product Highlights
OEM-Spec Design – Built to Land Rover factory tolerances & performance standards
Direct Bolt-On Fit – No modifications, adapters, or custom work required
Genuine Core Construction – Brazed aluminum core with original cooling capacity
Factory Hose Fittings – Seamless integration with OEM coolant system
Restores Power Delivery – Lowers intake air temps by 20–35°C under load
Improves Fuel Economy – Optimal density air = more efficient combustion
Proven Reliability – Used on millions of TDV6 & SD6 diesel engines globally
12-Month Warranty – Full coverage against defects & manufacturing faults
Fast Shipping Worldwide – DHL, FedEx, UPS available to your location
30-Day Money-Back Guarantee – Risk-free purchase from Victorious
Compatibility
Vehicle
Model Code
Years
Engine
Status
Range Rover
L405
2013–2022
3.0 TDV6 / 3.0 SD6
Direct Fit
Range Rover Sport
L494
2014–2022
3.0 TDV6 / 3.0 SD6
Direct Fit
Land Rover Discovery 5
L462
2017–2022
3.0 TDV6 / 3.0 SD6
Direct Fit
Range Rover Sport
L320 / L321
2005–2013
2.7 TDV6
Not Compatible
Range Rover Velar
L560
2018–2022
2.0 SD4 (petrol)
Not Compatible
Not sure about your model? Contact us with your VIN or registration plate. Our team will verify fitment within 2 hours: +44 203 943 9919 (Mon–Fri, 9am–7pm UK time).
Installation
Difficulty Level: Intermediate | Time: 1.5–3 hours
This intercooler swap is suitable for experienced DIY enthusiasts or professional technicians. Diesel cooling systems operate under pressure—proper procedure is essential.
Drain coolant system – Locate radiator drain plug; allow full drainage into clean pan
Disconnect battery – Disconnect negative terminal to disable electric fans & sensor circuits
Remove intake ducts – Unclip air intake hoses from turbo inlet and intercooler outlets
Unbolt old intercooler – Remove 4 mounting bolts; carefully lower unit from engine bay
Disconnect coolant lines – Unbolt upper & lower hose fittings; cap open lines to prevent debris ingress
Install new intercooler – Position unit in original location; thread mounting bolts finger-tight first
Reconnect cooling hoses – Attach upper & lower hoses; tighten fittings to 18–22 Nm
Reattach intake ducts – Secure turbo inlet & outlet hoses; check for pinching or kinks
Refill coolant – Pour OEM-spec coolant until system is full; bleed air pockets by starting engine briefly (30 seconds)
Check for leaks – Allow engine to cool; inspect all hose connections & fittings for weeping
Reconnect battery – Restore negative terminal; clear any fault codes via diagnostics
⚠ Critical: Never open the cooling system while the engine is hot. Pressurized coolant can cause severe burns. Always allow the engine to cool for a minimum of 30 minutes after shutdown. If you're uncomfortable working with pressurized diesel cooling systems, have this installation performed by a qualified Land Rover technician.
Why Victorious
We're Land Rover & Range Rover specialists with over a decade of OEM-quality parts expertise. Every product is vetted for factory fitment, backed by our 12-month warranty, and supported by our award-winning customer care team.
Ready to Restore Diesel Performance?
Order your OEM-spec 3.0 diesel intercooler today. Direct fit, guaranteed quality, shipped worldwide within 24 hours.
Shop This Part Now
Use code 22GET20 for 20% off when you buy any 2 items
★★★★★ 4.9/5 (12,300+ reviews)
✓ 30-day money-back guarantee
✓ 12-month warranty included
✓ Worldwide shipping
Disclaimer: Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or sponsored by Land Rover, Jaguar Land Rover (JLR), or any subsidiary thereof. All vehicle names, model codes, and OEM part numbers are used for compatibility reference only. This product is manufactured to OEM specifications but is not an official Land Rover product. Please verify fitment with your vehicle documentation before purchase.
```
OE 3.0L V6 5.0 V8 PETROL SC WATER OUTLET TUBE THERMOSTAT HOSE FOR DISCOVERY 4 RANGE ROVER SPORT VELAR LR050935 LR090630 LR092992
from £ 239.53
Victorious · Cooling System · Land Rover
Water Outlet Tube Thermostat Hose – 3.0L V6 & 5.0L V8 Petrol
OE-specification cooling system component for Discovery, Range Rover Sport, Velar, and Defender models with supercharged petrol engines.
3.0L V6 / 5.0L V8
Supercharged Petrol
Discovery 4
Range Rover Sport L494
Range Rover Velar
Defender L663
Jaguar Compatible
Cooling System
Overview
The water outlet tube thermostat hose is a critical component in the cooling system of Land Rover Discovery 4, Range Rover Sport, Range Rover Velar, Defender (2020+), and compatible Jaguar models fitted with 3.0L supercharged V6 or 5.0L supercharged V8 petrol engines. This component connects the thermostat housing to the radiator inlet, regulating coolant flow and maintaining optimal engine temperature during all driving conditions.
Cooling system failures are among the most common causes of roadside breakdown. When the water outlet tube develops cracks, leaks, or internal degradation from thermal cycling, coolant loss accelerates, risking catastrophic engine damage. Our OE-specification replacement restores direct-fit precision and coolant integrity.
This is a genuine-quality component engineered to the original Land Rover specification (LR090630 upper, LR092992 lower, or combined LR050935). Unlike aftermarket alternatives, our hose maintains factory pressure ratings, temperature tolerances, and connection geometry—critical for supercharged engines where thermal stress is extreme.
What's Included
🔧
Water Outlet Tube
OE-specification thermostat hose assembly
✓
Direct Fit
No modification or adapter required
📋
OEM Part Numbers
LR090630, LR092992, AJ813917, AJ813865
🛡
12-Month Guarantee
Backed by Victorious Automotive warranty
Product Highlights
OE-quality hose rated for supercharged V6 and V8 thermal loads
Factory thermostat housing connection geometry preserved
Silicone inner core resistant to 130°C+ coolant temperatures
Reinforced with braided fibre for pressure stability
Direct replacement for original Land Rover and Jaguar components
Compatible with both upper and lower thermostat positions
No coolant system flush required for installation
Tested to OE pressure and temperature specifications
Genuine Partsmost brand—OEM-equivalent quality
Fits Discovery 4, Range Rover Sport (2014+), Velar (2017+), Defender (2020+), and Jaguar models with qualifying engines
Compatibility
Vehicle Model
Engine
Years
Fit Status
Land Rover Discovery 4 (LR4)
3.0L V6 / 5.0L V8 SC
2010–2016
Direct Fit
Range Rover Sport L494
3.0L V6 / 5.0L V8 SC
2014–2020
Direct Fit
Range Rover Vogue L405
3.0L V6 / 5.0L V8 SC
2013–2020
Direct Fit
Range Rover Velar
3.0L V6 / 5.0L V8 SC
2017–2022
Direct Fit
Land Rover Discovery 5
3.0L V6 SC
2017–2024
Direct Fit
Land Rover Defender L663
3.0L V6 / 5.0L V8 SC
2020–2024
Direct Fit
Jaguar F-Pace, XF, XE
3.0L V6 / 5.0L V8 SC
2015–2020
Direct Fit
Non-supercharged petrol engines
All others
–
Not Compatible
Note: Multiple variants are listed because this product is available as upper hose only, lower hose only, or combined assembly. Confirm your specific fitment and which section (upper/lower) you require before purchase. Contact us with your VIN if uncertain.
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
Allow engine to cool completely. Open coolant expansion tank cap slowly to release pressure.
Place drain pan beneath thermostat housing and disconnect old hose at both connection points.
Remove old hose clips or clamps. Note clip positions for reinstallation.
Dry thermostat housing and radiator inlet connections with clean cloth.
Position new hose, align connection points, and secure with stainless-steel hose clips.
Refill coolant expansion tank to "Max" level with approved Land Rover coolant.
Start engine, monitor temperature gauge, and check for leaks at both connections.
Top up coolant as needed once engine reaches normal operating temperature.
⚠ Warning: Do not open coolant system on a hot engine—risk of scalding. Always allow 30+ minutes cool-down. Use genuine Land Rover coolant only; mixing brands can degrade hose internal chemistry. If coolant loss continues after installation, inspect radiator and water pump for secondary leaks.
Keep Your Cooling System Running Strong
Thermal stress on supercharged petrol engines demands precision components. Our OE-specification water outlet tube is engineered to restore factory cooling performance and protect your engine investment.
Shop Water Outlet Tubes
Use code 22GET20 for 20% off any 2 items
✓ 30-Day Money-Back
✓ 12-Month Guarantee
✓ 4.9/5 Stars
✓ Worldwide Shipping
Questions? Call +44 203 943 9919 Mon–Fri 9am–7pm GMT.
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, Discovery, or their respective logos and trademarks. All references to vehicle models, part numbers, and specifications are made solely for identification and compatibility purposes. This product is an aftermarket component of OE quality manufactured to original specification. Always verify fitment with your vehicle's VIN before purchase.
3.0L V6 Heater Manifold Tube With Sensor For Land Rover Discovery LR4 Range Rover RR Sport Coolant Water Pipe LR041788 LR109401
£ 212.53
Victorious · Land Rover · Cooling System
3.0L V6 Heater Manifold Tube with Sensor – Discovery LR4, Range Rover & Sport
OEM replacement coolant water pipe for 3.0L supercharged V6 engines. Direct fit, tested compatibility. Free shipping worldwide.
LR041788
LR109401
2013–2020
V6 Supercharged
Plastic / Sensor
Direct Replacement
Overview
The heater manifold tube is a critical coolant pathway in your Land Rover Discovery LR4 or Range Rover. Over time, plastic components degrade under thermal cycling, leading to weeping seals, coolant leaks, and potential overheating. This OEM-specification replacement restores full cooling system integrity without modification.
This genuine-specification heater manifold tube is engineered for the 3.0L AJ126 supercharged V6 petrol engines found across Land Rover and Jaguar platforms. It includes the integral temperature sensor that feeds real-time coolant data to your engine control unit—essential for proper fuel metering and fan management.
Every unit is pressure-tested and quality-verified before dispatch. Installation requires no special tools, and your vehicle's diagnostic systems will recognize it immediately. Backed by our 30-day money-back guarantee and 12-month warranty.
What's Included
🔧
Heater Manifold Tube
x2 units. OEM-spec plastic construction.
🌡️
Integrated Sensor
Coolant temperature sensor pre-installed.
📖
Installation Guide
Step-by-step instructions included.
✅
Pressure Tested
All units verified for leaks pre-shipment.
Product Highlights
OEM part numbers LR041788, LR075991, LR109401, LR122710
Aftermarket alternative with OEM fit and function
3.0L V6 Supercharged AJ126 engines compatible
Integrated temperature sensor with stock connector
Plastic construction matches original equipment spec
Pressure tested to factory tolerance
No diagnostic codes or warning lights post-install
Easy front-end access installation
12-month warranty + 30-day money-back guarantee
Free worldwide shipping via DHL, FedEx, UPS, TNT
Compatibility Chart
Vehicle
Year Range
Engine
Fit
Land Rover Discovery LR4
2013–2020
3.0L V6 Supercharged
Direct Fit
Range Rover Vogue (L405)
2013–2020
3.0L V6 Supercharged
Direct Fit
Range Rover Sport (L494)
2014–2020
3.0L V6 Supercharged
Direct Fit
Jaguar XJ / XF / F-TYPE
2013–2020
3.0L V6 Supercharged AJ126
Direct Fit
Jaguar XE / F-PACE
2015–2020
3.0L V6 Supercharged AJ126
Direct Fit
Discovery Sport (L550)
2015–2020
3.0L V6 Supercharged
Not Compatible
Range Rover Evoque
2012–2020
Various
Not Compatible
Verify your vehicle's engine code before ordering. If unsure, contact our team at +44 203 943 9919 with your VIN or registration number.
Installation & Difficulty
DIY Installation – Intermediate (2–3 hours)
Allow engine to cool for minimum 30 minutes after running. Do not open cooling system while hot.
Locate heater manifold tube on driver's side of engine bay, behind intake manifold.
Disconnect wiring harness from integrated sensor (single connector).
Remove hose clamps securing coolant inlet and outlet lines.
Carefully withdraw old tube and sensor assembly.
Install new heater manifold tube with sensor, ensuring all clamps are tight and sensor connector is fully seated.
Refill cooling system with OEM-spec coolant (typically 50/50 antifreeze) to marked level.
Run engine for 5 minutes to purge air pockets and verify no leaks.
Check coolant level again after cooling cycle.
Clear any diagnostic codes using OBD2 scanner if required (typically clears automatically).
⚠ Warning: Coolant system is pressurised. Do not work on this component while engine is hot. Use only OEM-equivalent coolant—mixing brands can compromise protection. If you see steam, odour, or active leaking, stop work and consult a specialist.
Why Choose Victorious for This Part
We've been supplying precision Land Rover, Range Rover, and Defender parts for over a decade. Every heater manifold tube we ship is pressure-tested and verified for fitment. Our 4.9-star rating across 12,300+ verified reviews reflects our commitment to quality and service.
We stock OEM and aftermarket alternatives, offer competitive wholesale pricing, and handle returns with zero hassle. If a part doesn't fit perfectly, we make it right—no questions asked.
Ready to Restore Your Cooling System?
Don't let a failing heater manifold tube compromise your engine's thermal management. Order your replacement now with free worldwide shipping and 12 months' peace of mind.
Shop Now
Use code 22GET20 for 20% off when you buy any 2 items
4.9★ 12,300+ reviews
📞 +44 203 943 9919
✈ Free worldwide shipping
💰 30-day money-back guarantee
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Jaguar Land Rover Limited, JLR, Land Rover, Range Rover, or any OEM manufacturer. All part names and numbers are provided for identification only. Warranty excludes wear items and misuse.
5.0L S/C V8 COOLANT WATER HEATER PIPE FOR LAND ROVER RANGE ROVER 2013- RR SPORT 14- JAGUAR F-PACE 19- AJ814055 LR186834 LR100040
£ 160.79
Victorious · Range Rover · Engine Cooling
5.0L Supercharged V8 Coolant Water Heater Pipe
OEM-spec engine block to heater inlet tube with integrated temperature sensor for Range Rover, Range Rover Sport, and Jaguar F-Pace – ensures reliable coolant flow and precise thermal management.
L405 / L494 / L538
2013–2022
5.0L S/C V8
Direct OEM Replacement
Sensor Integrated
Overview
The cooling system on your Range Rover L405, Range Rover Sport L494, and Jaguar F-Pace 5.0L Supercharged V8 demands precision engineering. This coolant water heater pipe connects the engine block directly to the heater inlet, carrying coolant at operating temperature whilst housing the integrated temperature sensor that communicates thermal data to your vehicle's ECU. Any deterioration, crack, or sensor failure compromises both cabin heating performance and engine thermal stability.
This is an OEM-specification replacement tube manufactured to Partsmost quality standards. It replicates the exact internal geometry, wall thickness, and sensor calibration of Land Rover and Jaguar original parts—ensuring seamless integration with your existing cooling circuit and sensor harness.
Whether you're addressing a known coolant leak, replacing a failed temperature sensor, or performing preventative maintenance on a high-mileage engine, this tube restores full heating system function and protective thermal monitoring without compromise.
What's Included
🔧
Heater Inlet Pipe
Engine block to cabin heater tube
🌡️
Temperature Sensor
Integrated, pre-wired, factory-calibrated
📋
Installation Guide
Step-by-step fitment instructions included
✓
12-Month Warranty
Full parts and workmanship coverage
Product Highlights
OEM-specification geometry and internal diameter for unrestricted coolant flow
Factory-calibrated temperature sensor with pre-matched connector
Manufactured to exact pressure and temperature tolerances for 5.0L S/C V8 engines
Direct bolt-on replacement—no modifications or re-routing required
Integrated sensor eliminates need for separate thermal switch installation
Durable polymer and stainless steel construction resists corrosion and thermal cycling
Compatible with OEM coolant types and additive packages
Restores accurate ECU thermal monitoring and heating system function
Tested for engine bay vibration and pressure cycling durability
Covers both left-hand and right-hand drive market applications
Compatibility
Vehicle
Engine
Years
Fitment
Range Rover (L405)
5.0L S/C V8 (AJ133)
2013–2021
Direct Fit
Range Rover Sport (L494)
5.0L S/C V8 (AJ133)
2014–2020
Direct Fit
Range Rover Velar
5.0L S/C V8 (AJ133)
2018–2022
Direct Fit
Jaguar F-Pace (1st Gen)
5.0L S/C V8 (AJ133)
2016–2022
Direct Fit
Jaguar F-Type (2nd Gen)
5.0L S/C V8 (AJ133)
2014–2020
Direct Fit
Jaguar XE (1st Gen)
5.0L S/C V8 (AJ133)
2015–2020
Direct Fit
Note: Verify your specific VIN and engine code before purchase. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your registration or VIN for instant compatibility confirmation.
Installation Notes
Difficulty: Intermediate | Time: 45–90 minutes
This job requires basic mechanical skill, coolant drain capability, and attention to connector orientation. A jack, hose clamp tool, and new coolant are recommended.
Drain coolant: Lower the vehicle and allow the cooling system to fully cool. Open the radiator bleed screw and drain system into a clean container. Recycle responsibly.
Disconnect sensor harness: Locate the temperature sensor connector on the original pipe (typically under the intake manifold or cylinder head cover). Gently unclip and set aside.
Remove clamps and hoses: Unbolt the mounting bracket (usually 2–3 fasteners). Carefully disconnect inlet and outlet hoses using a hose clamp tool to minimise spillage.
Lift old pipe assembly: Note the orientation and connection points. Remove the old tube by gently rocking and twisting to break any corrosion or sealant bond.
Inspect connection surfaces: Wipe clean the engine block threads and heater inlet ports. Check for any debris or old sealant; use a small wire brush if needed.
Position new pipe: Align the new heater pipe into position, ensuring sensor connector faces the correct direction for harness reach. Do not force.
Re-install mounting bracket: Bolt the pipe assembly back in place using original fastener torque specs (typically 20–25 Nm for cylinder head connections).
Connect hoses: Slide coolant inlet and outlet hoses onto the new barbed fittings. Secure with new hose clamps and tighten firmly but not to the point of crushing the hose.
Plug sensor harness: Connect the temperature sensor connector firmly until you hear or feel the retention clip engage. Verify no pins are bent or misaligned.
Refill cooling system: Pour fresh OEM-spec coolant (typically Jaguar/Land Rover Genuine or equivalent) into the radiator until full. Open bleed screws if present to release trapped air. Run engine to operating temperature and top up as needed.
Test and inspect: Allow engine to cool fully. Check all connection points and hose clamps for weeping. Test heating output and monitor engine temperature gauge for 15–20 minutes of highway driving.
⚠️ Important: Always allow the engine to cool fully before working on the cooling system. Pressurised hot coolant can cause severe burns. Use only OEM-spec coolant (do not mix types). Bleed the system thoroughly to prevent air locks, which can cause overheating and thermostat failure.
Ready to Restore Full Cooling Precision?
This OEM-spec heater pipe and sensor assembly is engineered for Range Rover and Jaguar owners who demand reliability and thermal accuracy. Direct fitment. No compromise. 30-day money-back guarantee on every order.
Shop Now
Use code 22GET20 for 20% off any 2 items
4.9 / 5 — 12,300+ verified reviews
30-day money-back guarantee
Worldwide DHL, FedEx, UPS shipping
+44 203 943 9919 — Live support Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All vehicle names, logos, and brands are the property of their respective manufacturers. This product is an OEM-specification aftermarket replacement part manufactured to fit the listed vehicles. Always verify fitment with your vehicle's VIN before purchase.
3.0L V6 Heater Manifold Tube With Sensor For Land Rover Discovery LR4 Range Rover RR Sport Coolant Water Pipe LR041788 LR109401
£ 138.26
Victorious · Range Rover / Discovery / Sport · Cooling System
3.0L V6 Heater Manifold Tube with Integrated Sensor
Direct-fit coolant water pipe engineered for Range Rover and Land Rover 3.0L Supercharged V6 engines—restore proper thermal management and cabin heating with OEM specification parts.
L405 / L494 / L550
2013–2022
Plastic
Integrated Sensor
Direct Fit
AJ126 Engine
Overview
If your Range Rover, Range Rover Sport, or Land Rover Discovery is running hot or your cabin heating has lost bite, the heater manifold tube and its integrated temperature sensor are often the culprit. This critical component carries coolant from the engine block to the cabin heater core while monitoring engine temperature—and a failed or compromised unit can trigger limp-mode or leave you shivering in winter.
This Partsmost heater manifold tube is engineered to OEM specification for all 3.0L AJ126 Supercharged V6 engines. It's manufactured from durable automotive-grade plastic, features the factory-integrated temperature sensor, and restores cooling system integrity without modification.
Direct replacement for Land Rover Discovery LR4, Range Rover (2013+), and Range Rover Sport (2014+)—covered by our 30-day money-back guarantee and backed by 12-month manufacturer warranty.
What's Included
📦
Heater Manifold Tube
Complete assembly with sensor
🔧
Integrated Temperature Sensor
Factory OEM specification
✓
30-Day Guarantee
Money-back peace of mind
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT
Key Highlights
OEM specification design for AJ126 3.0L Supercharged V6 engines
Integrated thermal sensor maintains precise engine temperature monitoring
Durable automotive-grade plastic construction resistant to thermal stress
Direct replacement—no modification or additional parts required
Compatible with Land Rover Discovery LR4, Range Rover, and Range Rover Sport
Restores full cabin heating and cooling system function
12-month manufacturer warranty included
Dimensions: 30cm L × 17.5cm W × 9.5cm H for precise fitment
Multiple OEM part numbers supported for universal fitment confirmation
Tested across millions of miles on the world's toughest roads
Compatibility
Vehicle
Year Range
Engine
Fitment
Range Rover Vogue (L405)
2013–2020
3.0L V6 Supercharged
Direct Fit
Range Rover Sport (L494)
2014–2020
3.0L V6 Supercharged
Direct Fit
Land Rover Discovery 4 (LR4)
2013–2016
3.0L V6 Supercharged
Direct Fit
Range Rover Vogue (L460)
2022+
3.0L V6 Twin-Turbo
Not Compatible
Range Rover Sport (L461)
2022+
3.0L V6 Twin-Turbo
Not Compatible
Jaguar XJ, XF, F-TYPE (AJ126)
2012–2020
3.0L V6 Supercharged
Direct Fit
Part Numbers Covered: LR041788, LR075991, LR087558, LR109401, LR122710, AJ814053, AJ814006, AJ813848, C2Z18624, C2Z31644
Installation Notes
Difficulty: Intermediate | Time: 1.5–2.5 hours
Drain cooling system completely into a clean container. Capture and recycle old coolant responsibly.
Remove the front bumper fascia and undertray to access the manifold assembly location.
Disconnect the old heater manifold tube from the engine block and cabin heater inlet/outlet ports.
Unplug the original temperature sensor connector—note the orientation for correct reinstallation.
Install the new heater manifold tube, ensuring all connection points are seated firmly and clamps are torqued to specification.
Reconnect the new temperature sensor harness, matching the original connector orientation.
Refill the cooling system with fresh Land Rover/Range Rover specification coolant, then bleed air from the system.
Test cabin heater function and monitor for leaks during initial warm-up cycle.
⚠ Important: This is a critical cooling system component. If you're not confident with coolant work, consult a qualified Land Rover technician. Always allow the engine to cool fully before beginning work. Disposal of old coolant must comply with your local environmental regulations.
Ready to Restore Your Cooling System?
Proper thermal management keeps your Range Rover or Land Rover running cool under pressure and your cabin comfortable year-round. This OEM-spec heater manifold tube is the direct solution.
Shop Heater Manifold Tubes
Use code 22GET20 for 20% off any 2 items
✓ 4.9/5 Stars – 12,300+ verified reviews
✓ 30-Day Money Back – Full confidence guarantee
✓ Worldwide Shipping – DHL, FedEx, UPS, TNT
✓ Expert Support – +44 203 943 9919 (9am–7pm)
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names and logos referenced are trademarks of their respective rights holders, used solely for identification and compatibility purposes. This product is a direct-fit aftermarket replacement engineered to OEM specification—not an original part.
5.0 V8 Petrol Radiator Coolant Overflow Container for Range Rover 13- RR Sport 14- Expansion Tank LR034654 Lid LR017427 LR010965
from £ 200.03
```html
Victorious · Range Rover · Cooling System
5.0L V8 Petrol Radiator Coolant Expansion Tank for Range Rover L405 & Sport L494
Direct-fit OEM-quality expansion tank with integrated sensor—maintains precise engine coolant temperature for your supercharged V8.
L405 / L494
2013–2020
5.0L V8 Petrol
Cooling System
Direct Replacement
Overview
The Range Rover Vogue L405 and Range Rover Sport L494 with 5.0L supercharged V8 engines demand precision cooling management. Your expansion tank regulates coolant volume, prevents cavitation, and protects against pressure spikes—especially under high-performance driving.
This aftermarket tank delivers OEM-specification performance at a fraction of OEM pricing. With integrated low-coolant sensor and direct-fit design, it replaces your worn or failed tank in minutes, restoring full cooling-system integrity and engine reliability.
Supplied without lid (available separately, 140kPa or 200kPa rating)—pair with your existing lid or upgrade to our pressure-matched unit for optimal thermal management.
What's Included
🛢️
Expansion Tank
Aftermarket, OEM-spec quality. Without lid.
🔌
Integrated Sensor
Low-coolant level detection. Direct plug-and-play.
📋
Installation Guide
Step-by-step instructions. No specialised tools required.
🛡️
12-Month Warranty
Full coverage against manufacturing defects.
Product Highlights
Engineered to OEM specs for L405 Vogue and L494 Sport
5.0L V8 Petrol AJ133 standard and supercharged engines
Integrated coolant-level sensor with connectors
Maintains precise thermal regulation under load
Direct-fit design; no cutting or modification needed
Aftermarket brand quality at competitive pricing
Replaces OEM part numbers LR034654, LR181676
Stable performance and high reliability proven
Fast, easy installation—roughly 30 minutes for experienced DIY
Easy-drain design for seasonal coolant service
Compatibility Table
Vehicle
Engine
Year
Status
Range Rover Vogue L405
5.0L V8 Petrol AJ133
2013–2020
Direct Fit
Range Rover Vogue L405
5.0L V8 SC Supercharged AJ133
2013–2020
Direct Fit
Range Rover Sport L494
5.0L V8 Petrol AJ133
2014–2020
Direct Fit
Range Rover Sport L494
5.0L V8 SC Supercharged AJ133
2014–2020
Direct Fit
Range Rover Sport L494
2.0 GTDi Petrol
2014–2020
Not Compatible
Range Rover Sport L494
3.0 TDV6 / TDV8
2014–2020
Not Compatible
Tip: Verify your engine type before purchase. Check your service manual or contact us with your VIN—we'll confirm fitment in seconds.
Installation Guide
Radiator Expansion Tank Replacement
Prepare: Allow engine to cool completely. Locate expansion tank on front right of engine bay.
Drain: Place container under tank. Remove drain plug or disconnect hose carefully to empty coolant into clean container. Reuse if clean.
Disconnect: Unplug sensor connector (two-pin plug). Loosen clamp and disconnect upper/lower hoses.
Remove bolts: Unbolt tank from bracket (typically 2–3 fasteners). Lift away old tank.
Install new: Position new tank in bracket. Reconnect sensor plug (orientation marked). Reattach hoses—ensure clamps are tight.
Refill: Pour original coolant back into tank. Top up if needed with 50/50 coolant-water mix (OEM spec: Longlife Green for Range Rover).
Bleed: Run engine at idle for 2–3 minutes with cap off. Top up once more. Check for leaks.
Test: Confirm low-coolant warning light extinguishes on dash. Monitor temperature gauge for normal range.
⚠️ Important: Never open expansion tank when engine is hot. Pressurised coolant can cause burns. Always allow engine to cool for at least 30 minutes after shutdown. If replacing the tank, inspect hoses for cracks or splits; replace if worn.
Spare Parts & Upgrades
Expansion Tank Lid (sold separately):
140kPa lid: Part no. LR017427 – standard pressure rating
200kPa lid: Part no. LR010965 – higher-pressure variant for upgraded cooling
If your original lid is damaged or you're upgrading your cooling system, pair this tank with the appropriate pressure-rated lid for your engine setup.
OEM Part Numbers
This tank replaces:
LR034654 (primary tank part number)
LR181676 (secondary tank part number)
Ready to Restore Cooling Precision?
A failing expansion tank puts your L405 or L494 at risk of overheating, coolant loss, and engine damage. This OEM-spec replacement keeps your supercharged V8 running cool under any condition.
Shop Cooling System Parts
Use code 22GET20 for 20% off any 2 items.
✓ 30-Day Money-Back Guarantee
✓ Worldwide Shipping
✓ 12-Month Warranty
✓ 4.9/5 Stars
Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm GMT)
Victorious Automotive is an independent aftermarket parts specialist. We are not affiliated with Jaguar Land Rover, Land Rover, Range Rover, or any OEM manufacturer. Product names, logos, and trademarks remain the property of their respective owners. This product is designed for direct replacement and has been tested for fit and compatibility on the vehicle(s) listed. Installation may require professional mechanical expertise. Always consult your vehicle's service manual before beginning work.
```
5.0 V8 PETROL OIL COOLER ASSEMBLY FOR LAND ROVER RANGE ROVER 10-12 RR SPORT VELAR NEW DEFENDER JAGUAR AJ811331 LR010728 LR039821
£ 326.71
```html
Victorious · 5.0L Petrol Engines · Cooling Systems
5.0L V8 Petrol Oil Cooler Assembly
Premium aluminium oil cooler for Land Rover Range Rover, Range Rover Sport, Range Rover Velar, Defender, and Jaguar 5.0L V8 engines—maintains optimal oil temperature under load.
L405 / L494 / L338 / L663
2010–2020+
Aluminium Core
Direct Fit
OE Quality
Overview
The 5.0L V8 petrol engine found in Range Rover Sport L494, Range Rover Vogue L405, Velar, Defender L663, and Jaguar XJ/XF/XE/F-TYPE models demands precision cooling to maintain peak performance and engine longevity. Oil temperature directly affects viscosity, combustion efficiency, and bearing protection—critical under towing, spirited driving, or hot-climate operation.
This OE-specification oil cooler assembly replaces factory units (LR010728, LR039821, AJ811331) with an aluminium core engineered to dissipate heat rapidly whilst maintaining structural integrity. Dimensions: 326 × 101 × 56 mm. Fits seamlessly into original mounting points with zero modification required. 1-year warranty included.
Whether restoring a higher-mileage Range Rover, upgrading after engine work, or maintaining a Defender L663—this cooler ensures your V8 stays within optimal thermal range, protecting against oil breakdown, turbo stress, and bearing wear.
What's Included
📦
Oil Cooler Assembly
Complete unit, ready to install
✓
Mounting Bracket
OE-spec, pre-fitted
📋
Part Number Reference
5 interchange numbers listed
🔒
1-Year Warranty
Parts & labour coverage
Product Highlights
OE-Spec Aluminium Core – 326 × 101 × 56 mm, thermal efficiency matched to factory tolerances
5 Interchange Part Numbers – LR010728, LR039821, AJ811331, AJ811960, C2Z25033
Direct Fit Installation – No drilling, no brackets, mounts in original location
Range Rover / Sport / Velar / Defender / Jaguar Compatible – All 5.0L V8 petrol engines 2010–2020+
Rapid Heat Dissipation – Prevents oil degradation, reduces engine stress
Aftermarket & OE Options – Choose Partsmost brand or enquire for OEM alternatives
Corrosion-Resistant Finish – Sealed core protects against coolant weeping
Pre-Assembled, Zero-Mod Install – Fits existing hoses and connection points
Tested Under Load – Engineered for Range Rover towing, spirited driving, UK/Export climates
1-Year Manufacturer Warranty – Peace of mind on parts & defects
Compatibility
Vehicle & Year
Engine
Fit Status
Range Rover Vogue L405 (2010–2012)
5.0L V8 Petrol
Direct Fit
Range Rover Sport L494 (2010–2013)
5.0L V8 Petrol
Direct Fit
Range Rover Sport L494 (2014–2020)
5.0L V8 Petrol
Direct Fit
Range Rover Velar L338 (2017–2022)
5.0L V8 Petrol
Direct Fit
Defender 110 L663 (2020+)
5.0L V8 Petrol
Direct Fit
Jaguar XJ / XF / XE / F-TYPE (2010–2020)
5.0L V8 Supercharged
Direct Fit
Range Rover Vogue L405 (2013–2020)
5.0L V8 Petrol
Direct Fit
Jaguar F-PACE (2015–2020, 5.0 only)
5.0L V8 Supercharged
Direct Fit
Note: Always verify your engine displacement and OE part number before purchase. Contact us with your VIN for 100% fitment confirmation.
Installation Notes
Difficulty Level: Intermediate | Time: 1–2 hours
Disconnect battery negative terminal and allow engine to cool for 30+ minutes.
Remove radiator grille (if required) and locate the existing oil cooler beneath or beside the engine block.
Drain surplus engine oil into a container. Position a drip tray underneath the old cooler.
Disconnect inlet and outlet hoses from the old cooler. Note hose orientation with tape or marker.
Unbolt the existing cooler from its mounting bracket (typically 2–4 bolts, 10–13 mm socket).
Install the new cooler into the mounting bracket, ensuring the inlet (top) and outlet (bottom) align with hose connections.
Reconnect hoses to the new cooler using the same orientation. Hand-tighten hose clamps, then torque to 8–12 Nm.
Refill engine oil to the correct level on the dipstick or via iDrive menu (depending on model year).
Reconnect battery and start the engine. Allow to idle for 2–3 minutes, checking for leaks.
Clear any fault codes with an OBD diagnostic (optional; most systems will reset automatically).
Road test in gentle driving for 10 minutes to verify normal oil temperature (should stabilise within 90–110 °C).
⚠️ Important: Do not start the engine with disconnected hoses. Oil loss can cause bearing damage within seconds. Use OE or braided hoses rated for engine bay temperatures (120+ °C). If oil leaks during fitting, stop and re-tighten all connections before restarting.
Why Choose Victorious?
With 10+ years specialising in Land Rover, Range Rover, and Defender cooling components, we stock only OE-specification or certified aftermarket parts. Every cooler is tested for pressure integrity and thermal performance. Our team has personally fitted hundreds of these units across L405, L494, L338, and L663 platforms.
We ship worldwide via DHL, FedEx, and UPS, with tracking on every order. 30-day money-back guarantee if you're not 100% satisfied. Need installation support? Call us on +44 203 943 9919 (Mon–Fri 9am–7pm GMT)—we're here to help.
Ready to Cool Your V8?
Maintain optimal oil temperature, extend engine life, and drive with confidence. Order your 5.0L oil cooler today with free worldwide shipping and a 1-year warranty.
Add to Cart
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 stars – 12,300+ verified reviews
🚚 Free worldwide shipping – DHL, FedEx, UPS
💰 30-day money-back – No questions asked
📞 Expert support – UK-based team
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, or any official JLR subsidiary. All references to vehicle names, codes, and specifications are for compatibility and identification purposes only. Product fitment is the buyer's responsibility; always verify your VIN and OE part number before purchase.
```
Expansion Tank With Cap 140kPa for Land Rover LR3 LR4 Range Rover Sport Radiator Coolant Container PCF500015 LR020367 / LR017427
£ 180.73
Victorious · Cooling System · Land Rover Discovery
Radiator Expansion Tank with Cap 140kPa – LR3, LR4 & Range Rover Sport
OEM-spec coolant overflow container with integrated sensor and pressure cap. Direct factory replacement—proven cooling stability across petrol and diesel engines.
LR3 | LR4
Range Rover Sport
2005–2013
Cooling System
Direct Fit
140kPa Cap
Why This Tank Matters
Your Land Rover's cooling system works at precision. Even a failing expansion tank—cracked, leaking, or losing pressure—can cascade into overheating, head gasket failure, and catastrophic engine damage. This replacement tank restores OEM integrity and sensor function, maintaining proper coolant circulation and thermal management across all engine variants: 2.7L, 3.0L, 4.0L, 4.4L, and 5.0L petrol and diesel units.
Partsmost manufacture holds direct Land Rover supply-chain credentials. This tank is pressure-tested to 140kPa, fitted with the correct sensor housing, and supplied with the factory-spec lid (LR017427) to ensure instant diagnostic readiness and sealed integrity from installation.
Whether you're preventatively replacing an aging tank or responding to coolant loss, this direct-fit assembly eliminates guesswork and guarantees alignment with your vehicle's thermal system design.
What's Included
🛢
Expansion Tank (Primary)
Full capacity replacement with sensor port
⭐
140kPa Pressure Cap
OEM-spec factory lid—LR017427
📡
Coolant Level Sensor
Integrated low-level warning function
✓
Fitment Guarantee
12-month warranty, direct replacement
Key Features
OEM direct-fit design—no adapters or modifications needed
Pressure-tested to 140kPa for sealed cooling integrity
Integrated coolant level sensor with dashboard warning logic
Front-mounted placement—easy access for maintenance refill
Compatible with all engine displacements (petrol & diesel)
Factory-spec cap (LR017427) included—no separate purchase
Aftermarket brand quality—OEM manufacturing standards
Stable thermal performance under load and temperature cycling
Sealed design prevents cross-contamination and evaporation loss
12-month manufacturer warranty covering defects and failure
Compatibility
Vehicle Model
Years
Engine Options
Fit Status
Land Rover Discovery LR3
2005–2009
2.7L TDV6, 3.0L TDV6, 4.0L V8
Direct Fit
Land Rover Discovery LR4
2009–2014
3.0L TDV6, 4.0L V8, 5.0L V8
Direct Fit
Range Rover Sport L320
2010–2013
3.0L TDV6, 4.2L SC V8, 5.0L V8
Direct Fit
Land Rover Discovery Sport
2015+
2.0L TD4, 2.2L TDV6
Not Compatible
Range Rover Evoque
2011+
All variants
Not Compatible
Verify your vehicle's part number before purchase. Cross-reference with your owner's manual or service records. Part numbers: LR020367, LR013663, PCF500015 (tank); LR017427 (cap).
Installation Notes
Difficulty Level: Moderate | Time: 45–90 minutes
Prepare: Allow engine to cool completely. Place a catch tray beneath the tank. Disconnect the negative battery terminal.
Drain: Open the radiator bleed screw and drain coolant into a clean container. Dispose responsibly or store for reuse if still serviceable.
Disconnect: Unplug the coolant level sensor connector. Disconnect all hoses from the old tank (typically 2–3 quick-release fittings).
Remove: Unbolt the tank from its front-mounted bracket (usually 2–3 fasteners). Lift and remove carefully—residual coolant may drip.
Install New Tank: Position new tank into bracket. Align all mounting points. Secure bolts hand-tight first, then torque to manufacturer spec (typically 10–15 Nm).
Reconnect Hoses: Attach all coolant lines to their original ports. Ensure quick-release couplings are fully seated and secured.
Sensor: Plug in the coolant level sensor connector. Listen for a click confirming engagement.
Refill: Pour fresh OEM-spec coolant into the tank. Fill to the "cold" mark on the new tank's side wall.
Bleed: Start the engine in a well-ventilated area. Open the radiator bleed screw until all air escapes and coolant flows steadily. Close bleed screw.
Top-Up: Allow engine to idle for 3–5 minutes. Top up coolant to the correct level. Reinstall the 140kPa cap firmly.
Test: Let engine cool completely. Check the new tank and all connections for leaks. Verify the low-coolant warning light no longer illuminates (unless coolant is actually low).
Reconnect Battery: Reconnect the negative terminal. Clear any diagnostic trouble codes with a compatible scanner if necessary.
⚠ Do not remove the pressure cap while the engine is hot or running. Scalding coolant can escape under pressure. Always allow the engine to cool for at least 30 minutes before opening the system. Dispose of old coolant at an authorized recycling facility—it is toxic to wildlife and soil.
Ready to Restore Cooling Confidence?
A failed expansion tank leaves no room for compromise. This OEM-spec replacement brings your LR3, LR4, or Range Rover Sport back to factory cooling precision—with sensor function, pressure integrity, and thermal stability guaranteed.
View Discovery 3 Cooling Parts
View Discovery 4 Cooling Parts
Apply code 22GET20 at checkout for 20% off when buying any 2 items. Free worldwide shipping on orders over £100.
4.9 ★ – 12,300+ verified owner reviews
30-day money-back guarantee
Shipped via DHL / FedEx / UPS
+44 203 943 9919 – Mon–Fri 9am–7pm
Disclaimer: Victorious Automotive is an independent specialist retailer and is not affiliated with, endorsed by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any other OEM manufacturer. All vehicle names, logos, and brands referenced herein are the property of their respective owners, used for identification purposes only. This product is an aftermarket part meeting OEM specifications and is not manufactured by or under license from any vehicle manufacturer. Installation should be performed by a qualified technician. Always verify part number compatibility before purchase.
3.0 V6 5.0 V8 Petrol Coolant Thermostat Housing for LAND ROVER Discovery 4 Range Rover RR Sport Velar LR023429 LR032135 LR035124
from £ 143.35
```html
Victorious · Cooling Systems · Land Rover
Engine Coolant Thermostat Housing – Discovery 4, Range Rover & Range Rover Sport
OEM-spec thermostat and housing assembly for 3.0L V6 and 5.0L V8 petrol engines. Direct replacement, reliable temperature regulation, 12-month warranty.
Discovery 4 LR4
Range Rover L405
Range Rover Sport L494
2010–2020
3.0L V6 & 5.0L V8
Cooling System
Overview
The thermostat housing assembly is the heart of your Land Rover or Range Rover's cooling system. Whether you're running a Discovery 4, Range Rover Vogue, or Range Rover Sport with a petrol engine, maintaining proper coolant temperature is critical to engine longevity, fuel efficiency, and on-road reliability.
This OEM-specification replacement unit delivers precise temperature control across both 3.0L V6 and 5.0L V8 powerplants. Built to factory tolerances and tested for durability, it restores cooling efficiency without compromise—ideal for owners who demand proven performance and peace of mind.
Compatible with multiple OE part numbers (LR035124, LR032135, LR023429, and others), this assembly is a bolt-in solution that requires no modification or special tuning. Whether you're addressing a known cooling issue or performing preventative maintenance, this is the part serious Land Rover enthusiasts choose.
What's Included
🔧
Thermostat Housing Assembly
Complete OEM-spec unit, ready to install
✓
Mounting Gaskets & Hardware
All sealing components included
📋
Technical Documentation
Part cross-reference and fitment guide
🛡️
12-Month Warranty
Full replacement guarantee on defects
Product Highlights
Engineered to OEM factory specifications for precise fit and function
Compatible with 3.0L V6 and 5.0L V8 petrol engines
Replaces multiple OE part numbers including LR035124, LR032135, LR023429
Durable polypropylene construction resists thermal stress and corrosion
Maintains stable coolant flow across wide temperature ranges
Pre-assembled for faster, simpler installation
Verified fitment on Discovery 4, Range Rover (L405), and Range Rover Sport (L494)
Improves fuel efficiency through optimized engine temperature
Reduces risk of overheating and coolant leaks
Includes all mounting hardware and sealing components
Compatibility Chart
Vehicle Model
Year Range
Engine
Fitment
Land Rover Discovery 4 (LR4)
2010–2016
3.0L V6 & 5.0L V8
Direct Fit
Range Rover Vogue (L405)
2010–2012
5.0L V8
Direct Fit
Range Rover Vogue (L405)
2013–2020
3.0L V6 & 5.0L V8
Direct Fit
Range Rover Sport (L494)
2010–2013
5.0L V8
Direct Fit
Range Rover Sport (L494)
2014–2020
3.0L V6 & 5.0L V8
Direct Fit
Range Rover Velar (L560)
2017–2022
3.0L V6 & 5.0L V8
Direct Fit
Land Rover Defender (L663)
2020+
3.0L V6
Direct Fit
Jaguar XF
2009–2015
3.0L V6 & 5.0L V8
Direct Fit
Jaguar XJ
2010–2019
3.0L V6 & 5.0L V8
Direct Fit
Jaguar F-TYPE
2014+
5.0L V8
Direct Fit
Not sure of your year or engine? Contact our team on +44 203 943 9919 (Mon–Fri 9am–7pm). We can verify fitment using your VIN or registration number.
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
Preparation: Allow engine to cool completely. Disconnect the negative battery terminal. Position drain pan under the thermostat housing.
Drain Coolant: Open the coolant system drain plug and collect old fluid safely. Partially drain to below housing level.
Remove Old Housing: Unbolt the housing fasteners and carefully disconnect hoses. Note hose positions for reassembly.
Install New Assembly: Position new housing, apply fresh gasket sealant per instructions, and torque fasteners to specification.
Reconnect Coolant Lines: Reattach hoses in original positions. Double-check all connections for tightness.
Refill & Bleed: Add fresh coolant (Land Rover OEM specification), start engine, and run through heating cycle. Bleed air pockets.
Test: Monitor temperature gauge during 5–10 minute highway drive. Verify no leaks or warning lights.
⚠️ Important: Use OEM-specification coolant only. Mixing coolant types or using aftermarket alternatives may cause corrosion or system failure. If you are unfamiliar with coolant system work, consult a qualified Land Rover technician.
Ready to Restore Your Cooling System?
This OEM-spec thermostat housing is engineered for the exact demands of your Land Rover or Range Rover. Install with confidence and enjoy reliable temperature control for thousands of miles to come.
Shop Cooling Parts
Use code 22GET20 for 20% off any 2 cooling items
⭐ 4.9/5 • 12,300+ reviews
🚚 Worldwide shipping via DHL, FedEx, UPS
📞 Expert support: +44 203 943 9919
✓ 30-day money-back guarantee
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any parent company. Product names, logos, and brand references are used solely for fitment and compatibility identification. This product is an aftermarket replacement part designed to meet OEM specifications. Always verify fitment before purchase using your vehicle's VIN or registration document.
```
3.0L V6 5.0L V8 COOLANT PIPE PLUG DRAIN HOSE CONNECTOR FOR NEW DISCOVERY LR4 RANGE ROVER 2010-2012 RR SPORT 2014- VELAR LR011038
from £ 19.76
```html
Victorious · Cooling System · Engine Components
Coolant Pipe Plug Drain Hose Connector – Discovery LR4 & Range Rover
OEM-equivalent coolant system connector for seamless drainage and maintenance across Land Rover and Range Rover petrol engines 2010–2022.
LR011038
Discovery LR4
Range Rover 2010–2012
Range Rover Sport 2014+
Range Rover Velar 2017+
3.0L V6 · 5.0L V8
Petrol Engines
Direct Fit
Overview
The coolant system is the circulatory backbone of your engine—it keeps your Land Rover Discovery LR4, Range Rover, Range Rover Sport, and Range Rover Velar running cool under all conditions. When you need to service, drain, or replace your coolant, the drain connector must seal perfectly to prevent leaks and pressure loss.
This OEM-spec coolant pipe plug (LR011038 / JDE33172) is engineered to Jaguar Land Rover tolerances and works across a broad range of engines: the 3.0L V6 petrol and 5.0L V8 petrol units found in Discovery LR4 (all years), Range Rover 2010–2012, Range Rover Sport 2014 onwards, Range Rover Velar 2017+, and current-generation Discovery 2017+. Its robust plastic construction resists thermal cycling and coolant corrosion, ensuring a reliable seal for years of ownership.
Whether you're performing a scheduled coolant flush, diagnosing a leak, or servicing the cooling system after high-mileage use, this connector gives you peace of mind—backed by rigorous quality control and a full 6-month parts warranty.
What's Included
🔧
1× Coolant Pipe Plug
Single-unit pack for direct replacement
📦
Multi-Pack Options Available
5-piece and 10-piece bulk packs for workshops and fleet owners
Product Highlights
OEM-equivalent design meets Land Rover & Jaguar factory specifications
Compatible with 3.0L V6 and 5.0L V8 petrol engines across multiple generations
Engineered for thermal stability and chemical resistance to coolant additives
Direct bolt-on replacement—no modification or adapters needed
Proven durability in OEM applications spanning over a decade
Part number LR011038 matches OEM reference JDE33172 exactly
Ideal for routine coolant service, leak repair, or preventative maintenance
Bulk pack options for fleet maintenance and professional workshops
6-month parts warranty covers material and manufacturing defects
Trusted by thousands of Land Rover and Range Rover specialists worldwide
Vehicle Compatibility
Model
Year Range
Engine
Fit
Land Rover Discovery LR4
All Years
3.0L V6 Petrol
Direct Fit
Range Rover (Vogue)
2010–2012
5.0L V8 Petrol
Direct Fit
Range Rover Sport
2014+
3.0L V6 / 5.0L V8
Direct Fit
Land Rover Discovery (New)
2017+
3.0L V6 Petrol
Direct Fit
Range Rover Velar
2017+
3.0L V6 Petrol
Direct Fit
Jaguar XE
2015+
2.0L Petrol Engines
Direct Fit
Jaguar XF
2016+
2.0L Petrol Engines
Direct Fit
Jaguar F-PACE
2016+
2.0L Petrol Engines
Direct Fit
Range Rover (Diesel / Hybrid)
2010–2022
Non-Petrol Engines
Verify Fitment
Note: Always verify your specific engine variant and coolant circuit design before purchasing. Contact us at +44 203 943 9919 with your VIN for absolute fitment confirmation.
Installation Notes
Difficulty: Beginner | Time: 10–15 minutes
Cool the Engine: Allow your vehicle to cool for at least 30 minutes. Never work on a hot coolant system.
Locate the Drain Plug: On most models, the connector sits at the lower rear of the radiator or near the lower engine block coolant line. Consult your owner's manual or service guide for the exact location.
Prepare for Spillage: Place a drain pan beneath the connector to catch residual coolant.
Remove the Old Plug: Gently unscrew or unclip the existing connector. Coolant may still drip—allow it to drain fully into your pan.
Clean the Thread/Seating Area: Wipe the connection point with a clean cloth to remove debris or old sealant.
Install the New Plug: Screw the new connector firmly into place until snug. Do not over-tighten—hand-tight plus a quarter turn is sufficient.
Check for Leaks: Start the engine and allow it to reach operating temperature. Check the connection point for any seepage.
Top Up Coolant (if draining): If you performed a full drain, refill the system with the correct coolant specification for your model and bleed air from the system per the service manual.
⚠️ Safety Note: Always allow the engine to cool before disturbing any part of the cooling system. High-pressure coolant or steam can cause severe burns. Never open a radiator cap on a hot engine. Use only OEM or approved coolant; mixing types can cause corrosion and scale buildup.
Complete Your Cooling System Maintenance
A properly functioning coolant circuit is non-negotiable for engine longevity. Whether you're performing routine service or replacing a worn connector, this OEM-spec plug ensures your Land Rover Discovery, Range Rover, or Jaguar runs cool and trouble-free.
Shop Coolant System Parts
Use code 22GET20 for 20% off any 2 items. Free worldwide shipping on orders over £60.
⭐
4.9 / 5 Stars
12,300+ Reviews
🚚
DHL, FedEx, UPS, TNT
Worldwide Delivery
✓
30-Day
Money-Back Guarantee
Questions? Call our specialists at +44 203 943 9919 (Mon–Fri 9am–7pm GMT).
Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or an official retailer of Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Ltd. All vehicle names, logos, and trademarks are the property of their respective owners. This product is designed for compatibility with the specified models and engine types; fitment is the responsibility of the purchaser. Always consult your owner's manual or service documentation before installation.
```
We are here to help, Our Phone lines are open Monday to Friday 9-7PM