Range Rover Evoque L538 Accessories

Victorious Automotive · Range Rover Evoque · Emergency & Warning Lighting 2×3 LED Strobe Warning Light – DC 12V Ambulance Police Flashing Light for Range Rover Evoque A compact, high-visibility 12V LED strobe unit delivering powerful flashing patterns for auxiliary warning, security, and emergency use on the Range Rover Evoque. Range Rover Evoque L538 Range Rover Evoque L551 DC 12V 2×3 LED Array Strobe Flash Plastic + LED Universal Fit CE Certified MZORANGE 0.1 kg Overview The Range Rover Evoque is a compact luxury SUV that balances refined urban capability with genuine off-road credibility. Whether you're running the L538 generation or the more recent L551, the Evoque's distinctive silhouette and premium cabin deserve accessories that match both its practicality and its character. For owners who require auxiliary warning or security lighting — whether for professional use, convoy work, or enhanced visibility in remote environments — a dedicated strobe light unit is an essential and discreet addition. This 2×3 LED strobe warning light from MZORANGE is a purpose-built DC 12V unit designed for direct integration into any 12-volt vehicle electrical system, making it entirely compatible with all Evoque variants. The six high-power 1W LEDs are arranged in a 2×3 matrix within a robust plastic housing, producing intense, attention-commanding strobe flash patterns that are immediately recognisable in both daylight and low-light conditions. Compact enough to mount discreetly on the grille, dashboard interior, or rear shelf, yet powerful enough to serve as a genuine auxiliary warning light, this unit suits Evoque owners operating in professional, agricultural, or security-adjacent contexts. Its universal 12V wiring means integration is straightforward, and the lightweight 100g construction imposes no meaningful load on any mounting surface. What's Included 💡 2×3 LED Strobe Unit Six 1W high-power LEDs in plastic housing 🔌 Wiring Leads Pre-attached DC 12V connection leads 🔵 Lens Cover Included coloured lens for light diffusion 📎 Mounting Hardware Basic fixings for surface or bracket mounting Product Highlights Six high-power 1W LEDs in a 2×3 array for maximum light output DC 12V operation — fully compatible with Evoque electrical systems Intense strobe flash pattern for high-visibility warning use Compact and lightweight at just 100g for discreet placement CE certified unit meeting basic external safety standards Durable plastic and LED construction built for sustained use Lens included for improved light diffusion and colour output Universal vehicle fit — suitable across all Evoque generations Suitable for grille, interior dash, or rear mounting positions Ideal for security, convoy, agricultural, and auxiliary warning use Compatibility Vehicle Generation / Code Year Range Fit Range Rover Evoque L538 (First Gen) 2011–2018 Direct Fit Range Rover Evoque L538 (Facelift) 2019 Direct Fit Range Rover Evoque L551 (Second Gen) 2019–2026 Direct Fit Land Rover Discovery Sport L550 2015–2026 Direct Fit Range Rover Velar L560 2018–2024 Direct Fit Defender L663 2020–2026 Direct Fit Range Rover Sport L494 / L461 2013–2026 Direct Fit Range Rover Vogue L405 / L460 2013–2026 Direct Fit Land Rover Defender (Classic) Pre-2016 2004–2016 Direct Fit 48V Mild Hybrid Systems Any Model 2020+ Verify Before Wiring Installation Notes 🔧 Difficulty: Easy · Estimated Time: 20–40 Minutes Select your preferred mounting location — grille bracket, interior dashboard panel, or rear parcel shelf are the most common positions on the Evoque. Ensure the vehicle ignition is off before beginning any wiring work. Disconnect the negative terminal of the battery if running the wiring through the bulkhead. Route the 12V positive lead to a switched ignition source or auxiliary relay — avoid tapping directly into permanent live circuits unless fitting a dedicated switch. Connect the ground lead to a clean chassis earth point. Avoid painted surfaces; use an existing ground bolt for best conductivity. Secure the strobe unit to the chosen surface using the supplied mounting hardware or appropriate adhesive brackets. Ensure the lens faces the intended direction of visibility. Restore power and test the unit through all flash modes before finalising cable routing and tidying looms with conduit or ties. ⚠ Important: The use of blue or red strobe lights on public roads is restricted or prohibited in the UK and most jurisdictions unless the vehicle is an authorised emergency service vehicle. Always check local road traffic legislation before operating this unit externally on a public highway. This product is sold for off-road, private land, security, and auxiliary use. Shop the Full Evoque Collection From lighting upgrades to interior refinements, Victorious Automotive carries everything the serious Evoque owner needs — curated, tested, and shipped worldwide. Shop Evoque L551 Accessories Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx, UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes. Always verify compatibility with your specific vehicle variant before purchase. Use of warning lighting on public roads is subject to local legislation — the buyer assumes full responsibility for lawful use of this product.

Victorious Automotive · Range Rover Evoque L551 · Headlamp Protection Headlamp Tint Pre-Cut Film for Range Rover Evoque 2020+ (L551) Pre-cut TPU headlamp tint film engineered to the exact lens profile of the 2020+ Range Rover Evoque — delivering smoked or clear protection that installs cleanly, self-heals from minor abrasions, and keeps your headlights looking factory-fresh. Range Rover Evoque L551 2020 – Present Top-Grade TPU Self-Healing Scratch Resistant Blackened & Transparent Pre-Cut Fit Set of 2 Overview The 2020-onwards Range Rover Evoque L551 represents a genuinely refined evolution of Land Rover's most urban, design-led SUV. With its flush Matrix LED headlights and sculpted front end, the Evoque commands attention — but those exposed polycarbonate lenses are vulnerable to stone chips, road debris, UV yellowing, and the kind of fine-surface scratching that accumulates over daily use and progressively dulls that sharp, purposeful look. This pre-cut headlamp tint film is manufactured from high-grade TPU (Thermoplastic Polyurethane) — the same class of material used in professional paint protection film. The film arrives precisely shaped to match the exact headlamp outline of the L551 Evoque, meaning no trimming, no guesswork, and a clean installation that sits edge-to-edge without visible overhang. Available in both a dark smoked blackened finish for an aggressive, contemporary aesthetic, or a clear transparent version for those who simply want invisible protection. The self-healing surface technology means light swirl marks and minor surface abrasions disappear with exposure to heat — keeping the film looking as good as the day it was applied. If you care about the long-term condition of your Evoque, this is one of the simplest and most cost-effective protective upgrades you can make. What's Included 💡 Pre-Cut Headlamp Film 2 pieces — driver & passenger side, L551 profile 🧰 Application Tools Kit Included as complimentary gift with every set 🎨 Choice of Finish Blackened smoked or transparent clear 📋 Installation Guide Step-by-step guidance for a clean, bubble-free fit Product Highlights Pre-cut to exact L551 Evoque headlamp dimensions — no trimming required Top-grade TPU material with genuine self-healing surface technology Available in blackened smoked finish for a stealth aesthetic Available in transparent clear for invisible, unobtrusive protection Scratch and abrasion resistant against stone chips and road debris UV resistant — prevents lens yellowing and surface degradation over time Conforms to the lens contour for a smooth, bubble-free application Does not impair headlamp light output or beam pattern Removable without adhesive residue — non-destructive to original lens 100% brand new — each set packaged and quality-checked before dispatch Compatibility Vehicle Years Fitment Range Rover Evoque L551 2020 – Present Direct Fit Range Rover Evoque L538 2015 – 2019 Direct Fit Land Rover Discovery Sport 2016 – Present Direct Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Vogue L405 2013 – 2017 Direct Fit Range Rover Vogue L405 2018 – Present Direct Fit Range Rover Sport L494 2014 – 2017 Direct Fit Range Rover Sport L494 2018 – Present Direct Fit Range Rover Sport L461 2022 – Present Check Variant Defender L663 2020 – Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools: Included Thoroughly clean both headlamp lenses with a mild soapy solution and allow to dry completely. Remove any wax, grease, or contaminants from the lens surface for maximum adhesion. Lightly mist the lens surface with a water and soap solution. This allows you to reposition the film during application before the adhesive fully sets. Carefully peel the backing from the pre-cut film and align it to the headlamp lens, starting from one edge and working progressively across the surface. Use the included squeegee tool to smooth the film outward from the centre, pushing out any air pockets or moisture as you go. Use a heat gun or hairdryer on a low setting to gently warm the edges of the film, encouraging it to conform tightly to any curved or contoured areas of the lens. Allow 24–48 hours for the film to fully cure and bond before washing the vehicle or exposing it to heavy rain. Note: Ensure the vehicle is parked in a clean, dust-free environment during installation. Avoid applying in direct sunlight or extreme cold, as both conditions will reduce working time and adhesion quality. The self-healing function activates with heat — minor surface marks will naturally diminish in warm conditions or with brief exposure to warm water. Shop the Full Range Rover Evoque Collection Browse our complete range of precision-fitted accessories for the Range Rover Evoque L551 — from exterior protection to interior upgrades, all selected and quality-checked by our team of Land Rover specialists. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L538 · Headlamp Protection Headlamp Tint Pre-Cut Film – Range Rover Evoque 2015–2019 (L538) Precision pre-cut TPU headlamp tint film that shields your Evoque's headlights from stone chips, UV damage, and road debris — available in Blackened or Transparent finish. Range Rover Evoque L538 2015–2019 Top-Grade TPU Self-Healing Scratch Resistant Pre-Cut Fit Blackened & Transparent No-Drill Install Overview The Range Rover Evoque L538 (2015–2019) is a design-led compact SUV that commands attention on both urban streets and open roads. Its slim, swept headlamp clusters are one of its most defining aesthetic details — and one of the first elements to show the cosmetic toll of daily driving. Stone chips, road grit, and UV exposure gradually dull and pit the lens surface, detracting from the Evoque's polished presence. These precision pre-cut headlamp tint films are laser-profiled to follow every contour of the Evoque's headlamp housings exactly — no trimming, no guesswork, and no risk of misaligned edges. Made from top-grade thermoplastic polyurethane (TPU), the film is genuinely self-healing at a molecular level; light surface scratches disappear under warmth, keeping the lens looking factory-fresh for years. Choose Transparent to retain the original headlamp colour and simply add an invisible armour, or opt for Blackened to give your Evoque a sharper, more sinister look without permanently modifying any component. Unlike cheap vinyl alternatives, this TPU film resists yellowing, resists peeling at the edges, and maintains optical clarity so your light output is never compromised. Installation requires no professional tools and leaves no permanent residue — meaning it's fully reversible whenever you choose. It's one of the most impactful yet understated upgrades available for the Evoque L538. What's Included 💡 2× Pre-Cut Headlamp Films Left and right, profiled for Evoque L538 2015–2019 🧰 Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step application instructions 🎨 Choice of Finish Blackened smoke or crystal transparent Product Highlights Precision pre-cut profile for exact fit on Evoque L538 headlamps Top-grade TPU construction — flexible, durable, optically clear Self-healing surface technology repairs light scratches with heat Available in Blackened smoke or Transparent protective finish Protects against stone chips, road debris, dust, and UV rays Fully reversible — removes cleanly with no adhesive residue No trimming required — direct application straight from the pack Does not reduce headlamp light output or beam quality Resistant to yellowing, peeling, and edge lifting over time DIY-friendly installation — no professional fitting required Compatibility Vehicle Year Range Fitment Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Separate SKU Range Rover Velar 2017–2020 Separate SKU Range Rover Vogue L405 2013–2017 Separate SKU Range Rover Vogue L405 2018–Present Separate SKU Range Rover Sport L494 2014–2017 Separate SKU Range Rover Sport L494 2018–Present Separate SKU Land Rover Discovery Sport 2016–Present Separate SKU This listing is pre-cut specifically for the Range Rover Evoque L538 (2015–2019). If your vehicle is listed above with a 'Separate SKU' badge, please browse our full Range Rover Evoque collection or Discovery Sport collection to find the correct fitment. Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Tools Required Thoroughly clean the headlamp lens surface with an alcohol-based solution and allow to dry completely. Remove any wax, polish, or silicone residue for best adhesion. Working in a warm, dust-free environment, carefully peel the backing layer from the TPU film — handle by the edges to avoid fingerprint contamination on the adhesive side. Using the included spray solution (or a light mist of soapy water), lightly dampen the headlamp surface to allow the film to be repositioned during application. Align the pre-cut film to the headlamp — the precision cut profile should follow the lens edge exactly. Work from the centre outward. Use the included squeegee to push out any air bubbles and water pockets, working from the centre toward the outer edges in firm, smooth strokes. Use a heat gun or hairdryer on low heat to gently warm the film over curved edges, encouraging the TPU to conform and bond fully. Allow 24–48 hours for the adhesive to cure fully before washing the vehicle or exposing to heavy rain. ⚠ Note: Do not apply in cold temperatures (below 10°C / 50°F) as this reduces film flexibility and may cause lifting at edges. Ensure the headlamp surface is completely dry before beginning. Do not use abrasive cloths during cleaning. Complete Your Evoque's Look Explore the full range of accessories curated specifically for the Range Rover Evoque L538 — from exterior protection to interior upgrades — all hand-selected by Land Rover enthusiasts. Shop Range Rover Evoque L538 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names and codes are referenced solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery / Range Rover · Steering Wheel Trim Steering Wheel Button Trim Frame in Black — Land Rover Vogue, Sport, Discovery & Evoque (2013–2017) A precision-fit black decorative frame that brings clean, consistent detail to your steering wheel's button surround — purpose-built for 2013–2017 Land Rover and Range Rover models. L405 · L494 · L538 · L462 2013–2017 Gloss Black Steering Wheel Trim No-Drill Fit Interior Upgrade Laser-Cut Direct Fit Overview The 2013–2017 generation of Land Rover and Range Rover interiors — spanning the L405 Vogue, L494 Sport, L538 Evoque, and L462 Discovery Sport — share a steering wheel design that remains refined but benefits from small, considered upgrades. The button surround area, in particular, is one of those details that separates a stock cabin from one that's been thoughtfully personalised. These Steering Wheel Button Trim Frames in Black are designed to sit flush over the existing button cluster surrounds on your steering wheel, introducing a clean gloss black border that ties directly into the dark tones popular across the interiors of this model range. The result is a more cohesive, finished look — the kind of detail you notice every time you sit behind the wheel. Precision laser-cut to match the exact dimensions of the factory button layout, they require no drilling, adhesive mess, or professional fitting. If you've been looking for a low-effort, high-impact upgrade that respects the original interior design while adding something genuinely your own, this is it. What's Included 🔲 Steering Wheel Button Trim Frame × 2 Left and right button surround frames, gloss black finish 📋 Fitting Guide Step-by-step installation reference included 🧤 Protective Packaging Individual foam-lined packaging to prevent transit damage Product Highlights Precision laser-cut for an exact, rattle-free fit on 2013–2017 steering wheels Gloss black finish complements both black and tan interior colour schemes Manufactured from durable ABS — resistant to heat, UV, and daily wear No drilling, cutting, or permanent modification required Clip-fit retention system holds firmly without adhesive Covers the full perimeter of the button cluster surround cleanly Slim-profile design maintains full button travel and tactile response Compatible across four distinct model lines from a single part Achieves a factory-integrated look rather than an obvious aftermarket addition Reversible upgrade — original trim can be restored at any time Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Evoque L538 2013–2017 Direct Fit Land Rover Discovery Sport L462 2015–2017 Direct Fit Land Rover Discovery 4 L319 2013–2016 Verify First Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your vehicle, switch off the ignition, and allow the steering wheel to return to its natural resting position for easy access. Clean the existing button surround area thoroughly using a dry microfibre cloth to remove any dust, grease, or residue that could affect fitment. Hold the trim frame up to the button cluster to confirm alignment before fitting — the frame should sit naturally with no forcing required. Starting from one edge, press the frame firmly into position over the existing surround, working gradually around the perimeter until the clip system engages fully. Apply even, gentle pressure across the full surface to confirm the frame is seated flush with no gaps or lifted edges. Repeat the process for the second frame on the opposite button cluster, then inspect both under natural light to confirm a consistent, rattle-free fit. ⚠ Important: Always verify your specific steering wheel variant matches the product images before fitting. Some early 2013 production vehicles may have a slightly different button surround profile. If in doubt, contact us before installation at +44 203 943 9919. Browse by Model Looking for additional interior upgrades for your specific vehicle? Explore our full curated collections below: 🔗 Range Rover Vogue L405 2013–2020 accessories 🔗 Range Rover Sport L494 2013–2020 accessories 🔗 Range Rover Evoque L538 Evoque accessories 🔗 Land Rover Discovery Sport Discovery Sport accessories Complete Your Interior Every detail matters. At Victorious Automotive, we stock the accessories that Land Rover owners actually want — refined, precise, and built to last. Explore our full interior range and use code below for 20% off any two items. Shop Interior Upgrades Use Code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover · Steering Wheel Trim Rose Gold Steering Wheel Button Trim for Range Rover Vogue, Sport, Discovery & Evoque (2013–2017) A precision-cut, peel-and-stick rose gold accent set that instantly elevates your steering wheel's button surround — no tools, no fuss, and a finish that looks factory-fitted. L405 Vogue 2013–2017 L494 Sport 2013–2017 L538 Evoque 2013–2017 Discovery 5 2017 Rose Gold ABS Peel & Stick 4-Piece Set No Tools Required Laser Cut Overview The Range Rover Vogue L405, Range Rover Sport L494, Range Rover Evoque L538, and early Land Rover Discovery 5 all share a similar interior design language — one that rewards carefully chosen accents. The steering wheel, being the most frequently touched surface in the cabin, is the first place owners look when considering a meaningful interior upgrade. This Rose Gold Steering Wheel Button Trim set consists of four precision laser-cut frames, designed to overlay the existing button surrounds on your multifunction steering wheel. Manufactured from high-quality ABS with a durable rose gold finish, each piece is engineered to mirror the contours of the original controls exactly — delivering a seamlessly integrated look rather than the afterthought appearance of generic overlays. Whether you're building out a full rose gold interior scheme or simply want a single focal point of warmth against a dark cabin, these button frames do the job with quiet confidence. Installation takes under ten minutes with no specialist tools, making this one of the most rewarding upgrades-per-pound available for these models. What's Included 🎛️ Button Frame Set (×4) Rose gold ABS overlay frames for steering wheel button surrounds 🔲 Pre-Applied 3M Adhesive Factory-applied double-sided tape on each piece for secure bonding 📋 Installation Guide Step-by-step fitting reference included in packaging 🛡️ Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Precision laser-cut ABS for an exact, gap-free fit on OEM button surrounds Durable rose gold PVD-style finish — resistant to everyday wear and UV fading Pre-applied 3M-grade adhesive backing for a strong, long-lasting bond Peel-and-stick fitment — no drilling, clipping, or professional installation required Specifically designed for 2013–2017 multifunction steering wheel layouts Four-piece set provides complete coverage of all button cluster surrounds Lightweight ABS construction adds negligible weight with no steering feel impact Complements other rose gold interior trim pieces for a cohesive cabin aesthetic Reversible install — removal leaves no residue on OEM surfaces when done correctly Compatible across four popular Land Rover and Range Rover nameplates Compatibility Vehicle Model Code Year Range Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Evoque L538 2013–2017 Direct Fit Land Rover Discovery 5 L462 2017 (Early) Direct Fit Range Rover Vogue L405 2018–2021 Verify First Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 4 L319 2009–2016 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Start with a clean, dry steering wheel. Using a microfibre cloth, wipe down all button surround areas with an isopropyl alcohol wipe (not included) to remove any oils, dust, or residue — this step is critical for adhesion. Dry-fit each of the four frame pieces onto their corresponding button clusters before removing any adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first piece. Position carefully over the button surround and press firmly for 10–15 seconds, working from the centre outward to eliminate air pockets. Repeat for the remaining three pieces. Apply consistent pressure across the full surface of each frame. Allow the adhesive to cure for 24 hours before heavy use or exposure to direct sunlight where possible — this ensures maximum long-term bond strength. ⚠ Important: Do not apply in temperatures below 10°C (50°F) as adhesive performance may be reduced in cold conditions. Verify your exact steering wheel variant matches the product images before installation. If your vehicle has a revised post-2017 steering wheel layout, please contact us before purchasing. Shop the Full Land Rover Collection Browse our complete range of interior upgrades for Range Rover Vogue, Range Rover Sport, Land Rover Discovery, and Evoque — all curated specifically for discerning Land Rover owners. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Shop Discovery 5 Accessories Buying two or more items? Use code below for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover (JLR), Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover / Land Rover · Interior Trim Black Steering Wheel Button Frame Trim for Range Rover Vogue, Sport, Discovery & Evoque (2017–2020) A precision laser-cut black trim frame that redefines the look of your steering wheel buttons — giving your 2017–2020 Range Rover or Land Rover interior a sharper, more refined finish. L405 Vogue 2017–2020 L494 Sport 2017–2020 Discovery 5 2017–2020 Evoque L538 2017–2020 Gloss Black Precision Laser Cut No Drilling Required OEM Fit Interior Trim Peel & Stick Overview The 2017–2020 Range Rover Vogue (L405), Sport (L494), Discovery 5, and Evoque (L538) share a steering wheel architecture that is functional and well-engineered — but the button surrounds, in stock form, lack the visual contrast that the rest of a premium interior deserves. Over time, the original plastic frames can appear faded, scuffed, or simply underwhelming compared to the cabin's overall standard. This Black Steering Wheel Button Frame Trim is designed to sit precisely over the existing button surrounds, transforming that overlooked detail into a deliberate design statement. The gloss black finish adds depth and contrast against the steering wheel's leather and stitching, creating a cohesive look that feels factory-intended rather than aftermarket. Whether your interior is finished in black, tan, or ebony, the contrast works cleanly across all trim levels. Each piece is laser cut to exact OEM tolerances, ensuring there are no gaps, misalignments, or adjustments needed on fitment. Installation requires no tools — the trim applies directly over the factory surround using a secure adhesive backing, making it one of the most accessible interior upgrades available for these models. What's Included 🖤 Steering Wheel Button Frame Set Full set of button surround trim pieces for left and right clusters 🔧 Installation Instructions Step-by-step guide included in the box 🧴 Adhesive Backing Pre-Applied High-bond 3M-style adhesive — no additional tools required 🧹 Prep Wipe Surface cleaning wipe for optimal adhesion before fitting Product Highlights Gloss black finish adds premium contrast to OEM button surrounds Precision laser cut for an exact, gap-free fit on all listed models Pre-applied high-bond adhesive — no drilling, no screws, no damage Durable ABS construction resists heat, UV, and daily wear Compatible with full 2017–2020 steering wheel layout including all button clusters Maintains full access and function to all steering wheel controls Complements other black interior trim upgrades across the cabin Installs in under 20 minutes with no professional help needed Removable without damage to original trim when care is taken Verified fitment across Vogue, Sport, Discovery 5, and Evoque variants Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 2017–2020 Direct Fit Range Rover Sport L494 2017–2020 Direct Fit Land Rover Discovery 5 L462 2017–2020 Direct Fit Range Rover Evoque L538 2017–2020 Direct Fit Range Rover Velar L560 2018–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Land Rover Discovery 4 L319 2009–2016 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 15–20 minutes  |  Tools Required: None Park your vehicle and ensure the steering wheel is centred and in its default position. Turn off the ignition completely. Use the included prep wipe to thoroughly clean the existing button surround area. Remove any dust, oils, or residue and allow to dry fully — approximately 60 seconds. Carefully peel the backing from the adhesive on the first trim piece. Do not touch the adhesive surface. Align the trim piece over the button surround, starting from one corner to ensure correct positioning before committing the full surface. Press firmly and evenly across the trim piece for 20–30 seconds to activate the adhesive bond. Work from the centre outward to avoid air pockets. Repeat for the remaining trim pieces. Allow the adhesive to cure fully for 30 minutes before operating the steering wheel controls. Check all buttons for unobstructed movement and confirm the trim sits flush with no lifting at the edges. ⚠ Important: Always verify your exact steering wheel variant against the product images before fitting. Steering wheel button layouts can vary between trim levels (SE, HSE, Autobiography, SVR) within the same model year. If you are unsure, contact us before installation at +44 203 943 9919 (Mon–Fri, 9am–7pm). Elevate Every Detail Your hands are on it every single drive. This is the kind of upgrade that rewards you every time you get behind the wheel — small in size, significant in feel. Shop the full interior trim collection for your model below. Shop Range Rover Vogue (L405) Accessories Shop Range Rover Sport (L494) Accessories Shop Discovery 5 Accessories Shop Evoque (L538) Accessories Buying 2 or more items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and associated vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Carbon Fiber Steering Wheel Button Trim Frame for Range Rover Vogue, Sport, Discovery 5, Evoque & Velar (2017–2020) A precision-cut carbon fiber upgrade that reframes your steering wheel controls with a sharper, more purposeful aesthetic — purpose-built for JLR interiors from 2017 to 2020. L405 Vogue 2018–2020 L494 Sport 2018–2020 Discovery 5 2019–2020 Evoque 2020 Discovery Sport 2020 Velar 2017–2020 Carbon Fiber Steering Wheel Trim No-Drill Fit Interior Upgrade Overview The steering wheel is the single most-touched surface in your Land Rover or Range Rover — it's where your hands rest every drive, where your thumbs navigate audio, telephony, and driver assistance controls. For owners of the L405 Vogue, L494 Sport, Discovery 5, Velar, Evoque, and Discovery Sport, the factory plastic button surrounds are functional but visually forgettable against an otherwise well-appointed interior. This carbon fiber steering wheel button trim frame addresses that directly. Precision laser-cut from high-quality carbon fiber composite, each frame is engineered to sit flush against the existing button clusters — bringing a motorsport-derived visual language to the cabin without requiring any modification to the original switchgear or wiring. The result is a cohesive, purposeful upgrade that reads as factory-specification to anyone who knows what they're looking at. Whether you're building out a full interior trim refresh or making a single targeted improvement, these frames offer one of the highest visual returns per pound of any interior accessory available for these platforms. Available in multiple colour finishes to complement your specific interior — black carbon, silver carbon, and more — so your upgrade matches, not clashes. What's Included 🎛️ Left Button Trim Frame Driver-side steering wheel control surround 🎛️ Right Button Trim Frame Passenger-side steering wheel control surround 🔧 Pre-Applied Adhesive 3M-grade backing tape for secure, residue-free fitment 🧤 Fitment Instructions Step-by-step guide included in packaging Product Highlights Precision laser-cut carbon fiber for an exact OEM-profile fit on JLR steering wheels High-gloss carbon fiber weave finish adds visual depth and tactile contrast Pre-applied 3M adhesive backing for tool-free, damage-free installation Does not obstruct or interfere with any existing steering wheel button functions Available in multiple finishes to complement both light and dark interior trims Lightweight composite construction adds no meaningful weight to the steering assembly Resistant to heat, UV fading, and everyday handling — built to last the vehicle's life Compatible across six JLR platforms sharing the same steering wheel button layout Reversible upgrade — removes cleanly without marking original plastic surfaces Designed and quality-checked specifically for 2017–2020 JLR platform steering wheels Compatibility Model Platform / Code Year Range Fitment Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Land Rover Discovery 5 L462 2019–2020 Direct Fit Range Rover Evoque L551 2020 Direct Fit Land Rover Discovery Sport L550 2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Park your vehicle and ensure the steering wheel is in the central, neutral position. Turn off the ignition and allow the wheel to cool if recently driven. Clean the existing button trim surround thoroughly using an isopropyl alcohol wipe. Remove any dust, skin oils, or polish residue. Allow to dry fully for 2–3 minutes. Test-fit the trim frame over the button cluster before committing — confirm the profile sits flush and all button apertures align correctly with no overhang. Peel the protective backing from the pre-applied adhesive tape. Align the frame carefully from one edge, pressing down progressively to avoid air pockets or misalignment. Apply firm, even pressure across the entire frame surface for 30–60 seconds. Allow the adhesive to cure for 1 hour before regular use. Repeat for the opposite side. Inspect both frames in good light to confirm even placement and consistent gap lines around each button. ⚠ Note: Do not stretch, flex, or force the trim frame during installation. Carbon fiber composite is rigid and will crack under bending stress. If fitment feels misaligned, remove carefully and reposition — do not apply additional pressure to compensate. Shop by Your Model Looking for more interior trim upgrades for your specific vehicle? Browse the full accessory collection for your platform below. 🔗 Range Rover Vogue L405 2013–2020 accessories 🔗 Range Rover Sport L494 2013–2020 accessories 🔗 Land Rover Discovery 5 L462 accessories 🔗 Range Rover Evoque L551 2019–2024 accessories 🔗 Range Rover Velar 2018–2022 accessories 🔗 Land Rover Discovery Sport L550 accessories Upgrade Every Detail This is the kind of upgrade that doesn't shout — it simply makes everything feel more considered. Add it to your basket alongside another Victorious favourite and use code below for 20% off both. Shop Discovery 5 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle make, model, and platform references are used solely for fitment compatibility purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery & Range Rover · Interior Trim Red Decorative Steering Wheel Button Frame — Land Rover Vogue, Sport, Discovery & Evoque (2017–2020) A precision laser-cut interior accent that brings a bold, personalised touch to your steering wheel — crafted specifically for Land Rover and Range Rover models from 2017 to 2020. Discovery 5 Range Rover Vogue L405 Range Rover Sport L494 Evoque L538 Velar 2017–2020 Steering Wheel Trim Red Finish Laser-Cut No-Drill Install Interior Accent Overview The Range Rover Vogue, Sport, Discovery 5, Evoque, and Velar represent some of the most refined interiors in the SUV segment — but for owners who want their cabin to feel truly their own, the factory finish only goes so far. The steering wheel, one of the most tactile surfaces in the vehicle, is one of the first places where a considered upgrade makes an immediate impression. These Red Steering Wheel Button Decorative Frames are engineered to sit flush over the existing button surrounds on your steering wheel, transforming the look of the controls with a sharp, colour-forward accent. Each frame is precisely laser-cut to ensure a factory-close fit — no gaps, no movement, no compromised aesthetics. The red finish adds a sporting character without feeling aftermarket or out of place against the premium trim levels these vehicles are known for. Compatible across a broad range of Land Rover and Range Rover models between 2017 and 2020, these frames install in minutes using adhesive backing — no tools, no drilling, no risk to your interior. Whether you're personalising a daily driver or finishing off a full interior refresh, this is one of the easiest, most impactful upgrades available for your steering wheel. What's Included 🔴 Steering Wheel Button Frames Full set of red decorative surrounds for steering wheel buttons 🔧 Pre-Applied Adhesive Clean adhesive backing for straightforward, tool-free fitting 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Precision laser-cut for exact button surround alignment Bold red finish adds a sporty, personalised cabin accent Tool-free installation — fits in under 15 minutes Pre-applied adhesive backing for secure, clean fitment Designed specifically for 2017–2020 Land Rover steering wheel profiles Does not interfere with button function or tactile feedback Durable, high-quality material resists fading and daily wear Removable without damage to the original steering wheel surface Compatible across five distinct Land Rover and Range Rover nameplates Available in additional colour options — check our other listings Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Evoque L538 2020 Direct Fit Land Rover Discovery 5 L462 2019–2020 Direct Fit Land Rover Discovery Sport L550 2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure your steering wheel surface is clean and completely free of dust, grease, and moisture. Use an isopropyl alcohol wipe for best adhesion results. Lay out the full set of frames and identify each piece against the corresponding button surround on your steering wheel. Peel the protective backing from the adhesive on the first frame, taking care not to touch the adhesive surface. Carefully align the frame over the corresponding button surround, pressing gently into position before applying firm pressure for 20–30 seconds. Repeat for all remaining frames, working methodically across the wheel. Leave undisturbed for a minimum of 30 minutes to allow the adhesive to fully bond before driving. Important: Verify your exact model year and steering wheel specification before fitting. Steering wheel button layouts can vary between facelift and pre-facelift builds within the same model year. If in any doubt, contact us on +44 203 943 9919 before ordering. Complete Your Interior Browse the full range of interior accessories for your Land Rover or Range Rover — from dashboard trims and gear surrounds to ventilation accents and door handle covers. Shop Discovery 5 Accessories Shop Range Rover Vogue L405 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for fitment identification and compatibility purposes. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Land Rover Discovery · Interior Trim Rose Gold Steering Wheel Button Decorative Frame — Land Rover Vogue, Sport, Discovery & Evoque 2017–2020 A precision-cut rose gold trim frame that transforms your steering wheel controls into a polished, luxury focal point — no tools, no hassle, no compromise. Discovery 5 (2017–2020) Range Rover Sport L494 Range Rover Vogue L405 Evoque L538 Rose Gold Finish Peel & Stick Laser Cut No Drilling Required Interior Trim 2017–2020 Overview The Land Rover Discovery 5, Range Rover Sport L494, Range Rover Vogue L405, and Range Rover Evoque L538 all share a refined interior philosophy — one where every surface, every detail, is expected to meet a high standard. The steering wheel, in particular, is the most tactile point of contact between driver and vehicle, and its button surrounds are among the most frequently noticed details in the cabin. This Rose Gold Steering Wheel Button Decorative Frame is designed to complement that philosophy precisely. Crafted with a premium rose gold finish and cut to exact tolerances using laser technology, each frame sits flush against the steering wheel button housing — eliminating the factory plain-plastic look and replacing it with something that genuinely looks like it belongs in a higher specification trim level. The application method is intentional: a high-strength peel-and-stick backing bonds cleanly to the existing surface without requiring removal of steering wheel components, adhesives, or specialist tools. The result is a lasting, rattle-free upgrade that looks factory-fitted from day one. What's Included 🔲 Decorative Frame × 2 Matching rose gold button surround frames for left and right steering wheel control clusters 📋 Pre-Applied Adhesive Backing High-bond 3M-style tape pre-fitted to each frame for immediate application 🧼 Cleaning Preparation Wipe Surface prep wipe included to ensure maximum adhesion on installation 📄 Installation Guide Step-by-step instruction sheet included in the package Product Highlights Precision laser-cut to match OEM steering wheel button housing dimensions exactly Premium rose gold finish — sophisticated, warm, and distinct from standard chrome trims Tool-free peel-and-stick installation — no disassembly of steering wheel required High-strength adhesive backing provides a permanent, rattle-free bond Compatible across four Land Rover and Range Rover model lines (2017–2020) Does not obscure, interfere with, or impede any steering wheel button function Resistant to UV fading and the temperature fluctuations typical of vehicle interiors Available in multiple colour options — rose gold, silver, carbon and gloss black variants Low-profile fit sits flush with surrounding trim for a factory-finished appearance Reversible upgrade — frames can be removed cleanly without damage to OEM surfaces Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Range Rover Vogue L405 2017–2020 Direct Fit Range Rover Sport L494 2017–2020 Direct Fit Range Rover Evoque L538 2017–2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 (2019+) 2019–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Easy — No Tools Required Park your vehicle and ensure the steering wheel is in a neutral, centred position with the engine off. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight. Use the included preparation wipe to thoroughly clean the surface of the steering wheel button housing. Remove any dust, oils, or residue and allow the surface to dry completely before proceeding. Test-fit both decorative frames against the button housings without removing the adhesive backing — confirm alignment, orientation, and that all button cutouts line up correctly. Peel the protective film from the adhesive backing on the first frame. Carefully align the frame over the button housing, starting from one edge and pressing firmly into place to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of the frame for 30–60 seconds to activate the adhesive bond. Repeat for the second frame on the opposite side. Allow the adhesive to cure for a minimum of 2 hours before regular use. Avoid operating the steering wheel controls forcefully during this initial cure period. ⚠ Please Note: Verify your specific vehicle's steering wheel button housing design before purchasing. While this frame is compatible with the 2017–2020 model years listed, minor manufacturing variations can occasionally exist across production runs and regional markets. If in doubt, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Elevate Every Drive At Victorious Automotive, every product we carry is chosen because it genuinely enhances the ownership experience of a Land Rover or Range Rover. This rose gold steering wheel frame is one of those rare upgrades — small in scale, significant in impact. Browse our full Discovery 5 and Range Rover collections to find everything your vehicle deserves. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Silver Interior Frame Trim for Range Rover Evoque L538 2012–2018 A precision-cut, glue-fit ABS silver trim overlay that refreshes the interior frame detailing of your Evoque with a clean, factory-finish aesthetic — no drilling, no damage. Evoque L538 2012–2018 ABS Material Silver Finish Glue-Fit Install Interior Trim OEM Sizing 100% New ONESTICKERS Overview The Range Rover Evoque L538, produced between 2012 and 2018, established itself as one of Land Rover's most design-forward vehicles — a compact SUV that blended urban style with genuine off-road capability. Inside, the cabin reflects that ambition, but over time interior trim pieces can fade, scuff, or simply begin to look dated against the overall character of the car. This Silver Interior Frame Trim is a direct-fit ABS overlay designed to sit seamlessly over the existing interior frame surfaces of the Evoque L538. Finished in a clean silver tone with a 3D profile, it restores a sharp, premium look to one of the most visually prominent areas of the cabin. The adhesive-backed fitment means installation is clean and reversible, with no permanent modification required. Manufactured to OEM dimensions under the ONESTICKERS brand, this trim piece is precision-engineered to match the exact contours of the Evoque's interior frame — so it sits flush, looks factory, and protects the underlying surface from everyday contact wear at the same time. What's Included 🪟 Silver Frame Trim Overlay ABS silver trim piece, OEM-matched sizing 🔧 Pre-Applied Adhesive Glue backing ready for fitment 🧹 Clean-Fit Design No drilling or cutting required 📦 Direct Dispatch Ships worldwide via DHL, FedEx, UPS, TNT Product Highlights Precision-cut to OEM Evoque L538 frame dimensions High-quality ABS construction — durable and lightweight Silver finish adds a premium, contemporary interior tone 3D profile sits flush with existing trim surfaces Pre-applied adhesive backing for clean installation Protects original trim from scuffs and contact wear No drilling, cutting or permanent modification needed Fully reversible — can be removed without damage 100% brand new — not a refurbished or remanufactured part Compatible with all Evoque L538 variants, 2012–2018 Compatibility Vehicle Code Year Range Fit Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque (Facelift) L538 2016–2018 Direct Fit Range Rover Evoque Convertible L538 2016–2018 Direct Fit Range Rover Evoque L551 2019–Present Not Compatible Range Rover Velar L560 2018–Present Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean the target interior frame surface using an isopropyl alcohol wipe. Remove all dust, grease, and residue, then allow to dry completely before proceeding. Dry-fit the trim overlay against the frame surface to confirm alignment and verify the OEM size is correct for your specific Evoque variant and year. Peel back a small section of the adhesive backing and carefully position the trim piece from one end, pressing firmly as you go to avoid air bubbles or misalignment. Once fully seated, apply firm, even pressure across the entire trim surface for 30–60 seconds to ensure the adhesive bonds correctly to the substrate. Allow the adhesive to cure for at least 24 hours before exposing the trim to moisture, cleaning products or direct sunlight for extended periods. ⚠ Note: Ensure the cabin temperature is above 15°C (59°F) at time of installation. Cold surfaces significantly reduce adhesive bond strength. Do not attempt to reposition the trim repeatedly once the adhesive has made contact. Finish Your Evoque Interior the Right Way At Victorious Automotive, we stock a full range of interior and exterior accessories for the Range Rover Evoque L538. Browse the complete collection or get in touch with our team if you need guidance on fitment or compatibility. Shop Range Rover Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar & Evoque · Interior Trim Aluminum Alloy Central Air Conditioning & Volume Knob Trim — Range Rover Velar 2017–2019 & Evoque 2019–2020 Precision-machined aluminum alloy knob ring trims that instantly elevate the tactile quality and visual refinement of your Velar or Evoque's central console. Range Rover Velar 2017–2019 Evoque 2019–2020 Aluminum Alloy 3-Piece Set Peel & Stick Install ISO9001 Certified 4 Colour Options Interior Trim Overview The Range Rover Velar and second-generation Evoque represent two of the most design-forward vehicles in the Land Rover lineup — clean surfaces, considered proportions, and an interior language that rewards those who notice the details. But the factory-finish plastic surrounding the climate and volume knobs has always been the one area where the interior falls just short of its own ambition. These aluminum alloy knob ring trims are engineered specifically for the Velar (2017–2019) and Evoque (2019–2020) centre console layout. Each ring is precision-formed from aerospace-grade aluminum alloy and finished to a standard that complements the vehicles' existing metalwork. Available in four colourways — silver, blue, rose gold, and red — there is an option to match whether your interior leans understated or expressive. ISO9001-certified manufacturing ensures dimensional accuracy for a flush, rattle-free fit. The result is a cabin upgrade that feels factory-intentional rather than aftermarket-applied — the kind of detail that Velar and Evoque owners will notice every single time they reach for the climate controls. What's Included ⭕ Knob Ring Trims × 3 Full set covering AC and volume knobs 🔵 Choice of 4 Finishes Silver, Blue, Rose Gold, or Red 🔧 Pre-Applied Adhesive 3M-style peel-and-stick backing included 📋 Fitment Guide Model-specific placement reference Product Highlights Precision-machined from durable aluminum alloy — not plastic ISO9001-certified production for consistent dimensional accuracy Direct-fit design — no cutting, drilling, or modification required Four finish options: Silver, Blue, Rose Gold, and Red Environmentally responsible materials throughout manufacture Rattle-free fit with flush surface alignment to factory trim Peel-and-stick installation — reversible and residue-minimal Elevates tactile feel every time you adjust climate or volume Complements existing brushed metal interior elements 3-piece set covers all central console knob positions in one kit Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2019 All Variants Direct Fit Range Rover Evoque (L551) 2019–2020 All Variants Direct Fit Range Rover Evoque (L538) 2011–2018 All Variants Not Compatible Range Rover Velar 2020+ All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes ⏱ Estimated Time: 10–15 Minutes  |  Difficulty: Beginner Ensure the vehicle interior is at room temperature — cold surfaces can reduce adhesive performance. Avoid installation below 10°C. Clean each knob base thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue from around the knob collar and allow to dry completely. Dry-fit each ring trim to confirm orientation and alignment before committing. The trims are shaped to sit flush — test the fit without removing the adhesive backing first. Peel the protective backing from one trim at a time. Position carefully over the knob base and press firmly from the centre outward for 30–60 seconds. Repeat for all three trims. Allow the adhesive to cure for at least one hour before subjecting the trims to heat from the climate system. ⚠ Note: Do not apply excessive rotational force directly to the trim rings — they are decorative overlays, not structural components. If a trim lifts at the edges after installation, reapply with a trim-safe adhesive promoter for a more permanent bond. Complete Your Velar or Evoque Interior These knob trims pair beautifully with our wider range of Velar and Evoque interior accessories. Browse the full collection or get in touch with our team for fitment advice — we know these vehicles inside out. Shop Range Rover Velar Accessories Shop Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque L538 · Interior Pedals & Footrests Stainless Steel Dead Pedal Foot Rest for Range Rover Evoque 2012–2019 (L538) — Left Hand Drive A precision-fit dead pedal upgrade that brings a factory-premium feel to your Evoque's driver footwell — crafted from brushed stainless steel with a durable black plastic base for a clean, lasting finish. Range Rover Evoque L538 2012–2019 Left Hand Drive Only Stainless Steel Black Plastic Base Dead Pedal / Foot Rest Interior Upgrade 150g Lightweight CE Certified No Drilling Required Overview The Range Rover Evoque L538 — produced between 2012 and 2019 — set a new benchmark for compact luxury SUVs when it arrived. With its distinctive coupé-inspired silhouette, premium interior appointments, and dynamic driving character, the Evoque attracted owners who demanded more from every detail of their vehicle. The driver's footwell is no exception: long motorway journeys and spirited driving both deserve a foot rest that feels as considered as the rest of the cabin. This dead pedal foot rest is designed specifically for the Evoque L538 in left hand drive configuration, slotting precisely into the driver's footwell to provide a solid, comfortable resting point for the left foot. The combination of brushed stainless steel and black plastic delivers both visual refinement and long-term durability — resisting scuffs, wear, and the kind of daily abuse that original rubber mats simply can't handle. At just 150g, this is one of those understated upgrades that you'll notice every single drive — a satisfying solidity underfoot that elevates the feel of the entire driving environment without altering the factory aesthetic. It's the kind of detail that separates a well-kept Evoque from an exceptional one. What's Included 🦶 Dead Pedal Foot Rest Cover Brushed stainless steel face with black plastic mount base 🔩 Fixing Hardware All necessary fixings included for a secure, rattle-free fit 📋 Installation Guide Step-by-step fitting instructions for a hassle-free install Product Highlights Precision-engineered for the Range Rover Evoque L538 (2012–2019) footwell dimensions Brushed stainless steel surface — resists scratching, scuffing, and long-term wear Black plastic base provides a secure, vibration-free mounting platform Left hand drive specific design — perfect fit for LHD driver footwells only Lightweight at 150g — no impact on pedal ergonomics or driving dynamics CE certified — independently tested and verified for quality and safety Complements factory interior trim without altering the OEM aesthetic Simple, tool-minimal installation — no permanent modifications or drilling Adds lasting comfort on long drives by providing a dedicated left foot rest point An affordable interior upgrade that delivers a noticeably premium feel every drive Compatibility Model Generation Year Range Drive Fitment Range Rover Evoque L538 (First Gen) 2012–2019 Left Hand Drive Direct Fit Range Rover Evoque L538 (First Gen) 2012–2019 Right Hand Drive Not Compatible Range Rover Evoque L551 (Second Gen) 2019–Present All Not Compatible Range Rover Sport L494 — 2013–2020 All Not Compatible Land Rover Discovery Sport — All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 minutes  ·  Tools Required: None / Minimal Ensure the driver's footwell is clean and free of debris before beginning installation — wipe down the existing foot rest area with a dry cloth. Remove any existing OEM rubber foot rest cover or mat from the driver's footwell if present. Align the new stainless steel foot rest cover over the mounting area, ensuring the black plastic base sits flush and level against the footwell floor. Secure using the provided fixing hardware — press or clip firmly into place until the unit is stable and rattle-free. No drilling or permanent modification is required. Apply light pressure across the surface to confirm the fitment is secure, then test by resting your foot naturally to verify comfort and stability before driving. ⚠ Important: This foot rest is designed exclusively for Left Hand Drive Range Rover Evoque L538 models (2012–2019). Attempting to fit this item to a Right Hand Drive vehicle or any other model will result in an incorrect fit. Please confirm your vehicle's drive configuration before ordering. Upgrade Your Evoque's Footwell Today Shop the full Range Rover Evoque L538 accessories collection at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Worldwide shipping via DHL, FedEx, UPS, and TNT. Protected by our 30-day money-back guarantee. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque · Interior Trim Black Aluminum Alloy Dashboard Speaker Cover Trim — Range Rover Evoque 2020 (Left Hand Drive) A precision-machined aluminum alloy speaker cover trim that brings a clean, blacked-out finish to the Evoque's dashboard, replacing factory plastic with a component that looks and feels like it belongs at a higher specification level. Range Rover Evoque 2020 Model Year Left Hand Drive Aluminum Alloy Black Finish Dashboard Trim Speaker Cover ISO 9001 Certified Direct Fit No Modifications Required Overview The Range Rover Evoque has always occupied a unique space in the Land Rover lineup — urbane, design-forward, and unmistakably premium in its intentions. The 2020 model year brought a refined second-generation interior that raised the bar considerably, yet certain factory trim pieces, particularly around the dashboard speaker area, leave room for improvement when it comes to material quality and visual presence. This black aluminum alloy dashboard speaker cover trim from metyoucar (model LLK2588) addresses exactly that. Machined from quality aluminum alloy and finished in a deep, consistent black, it replaces the factory plastic speaker surround with a component that adds genuine material substance to the dashboard environment. At 67cm in length and just 180g, it's engineered to sit flush with the original mounting points without adding bulk or requiring any cutting or adhesive work. The result is a subtle but immediately noticeable upgrade — the kind that other Evoque owners and passengers will register without necessarily knowing why the interior feels more considered. It's the right upgrade for drivers who want their Evoque's interior to match the ambition of its exterior design. What's Included 🔲 Speaker Cover Trim Panel Black aluminum alloy, 67cm length 🔩 Mounting Clips / Fixings Factory-compatible retention hardware 📋 Installation Reference Basic fitment guide included 📦 Protective Packaging Safely packaged to prevent transit damage Product Highlights Manufactured from durable aluminum alloy for a premium feel over factory plastic Deep, consistent black finish that integrates naturally with dark Evoque interiors Precision dimensioned at 67cm × 14cm × 3cm for an exact factory-replacement fit Lightweight construction at just 180g — no stress on mounting points Designed specifically for the 2020 Range Rover Evoque Left Hand Drive configuration ISO 9001 certified manufacturing process ensures consistent quality and finish Direct OEM-replacement clip fitment — no drilling, cutting, or adhesive required Retains full speaker functionality — trim only, no audio interference Sold as a complete dashboard speaker cover trim panel ready to install Ideal standalone upgrade or part of a wider Evoque interior refresh project Compatibility Vehicle Year Drive Configuration Fitment Range Rover Evoque (L551) 2020 Left Hand Drive Direct Fit Range Rover Evoque (L551) 2020 Right Hand Drive Not Compatible Range Rover Evoque (L551) 2019 & Earlier Any Not Compatible Range Rover Evoque (L551) 2021 & Later Any Verify Before Purchase Range Rover Evoque (L538) 2011–2018 Any Not Compatible ⚠ This trim is designed exclusively for the 2020 Range Rover Evoque L551 in Left Hand Drive specification. If you are unsure of your vehicle's drive configuration or model year variant, please contact us before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–40 Minutes  ·  Tools Required: Trim removal tool, clean microfibre cloth Ensure the vehicle is parked, engine off, and the dashboard area is cool to the touch before beginning. Using a plastic trim removal tool, carefully prise the factory speaker cover trim away from the dashboard fascia, working from one end to the other to release the retaining clips evenly. Remove the OEM trim panel fully and set aside. Clean the mounting surface with a dry microfibre cloth to remove any dust or debris from the clip housing area. Align the new black aluminum alloy trim panel with the mounting clip positions, ensuring the panel sits flush at both ends before applying pressure. Firmly press the trim along its length until all clips engage audibly — you should hear a clean click at each retention point. Run your fingertip along the full length of the installed trim to confirm there are no raised edges or uneven gaps against the dashboard surface. Important: This trim is designed for Left Hand Drive vehicles only. Attempting to fit this panel to a Right Hand Drive Evoque will result in an incorrect fitment. Always use a plastic trim tool — metal tools risk scratching the aluminum finish and the surrounding dashboard surfaces. Complete Your Evoque Interior Browse the full Victorious range of Range Rover Evoque interior accessories — from carbon fibre accents to gear surround trims and centre console upgrades — all curated for owners who refuse to settle for standard. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. Range Rover, Evoque, and all associated model names are registered trademarks of Jaguar Land Rover Limited. All product fitment information is provided in good faith; customers are responsible for confirming compatibility with their specific vehicle configuration prior to purchase.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim ABS Chrome Interior Door Trim for Range Rover Evoque L551 2019–2020 — Without Memory Button A precision-fit set of four chrome door decoration trims that elevate the cabin ambience of your Evoque L551 with a clean, contemporary silver finish — no modification required. Evoque L551 2019–2020 ABS Chrome Without Memory Button Set of 4 Direct Fit Adhesive Install Silver Finish Overview The second-generation Range Rover Evoque (L551) was a significant step forward for Land Rover — sharper styling, a more refined interior architecture, and an elevated standard of cabin quality that owners rightly take pride in. It's a vehicle that rewards attention to detail, and the door panel area is one of the most-touched, most-noticed surfaces inside the cabin every single day. These ABS Chrome Interior Door Trims are designed from the ground up for the 2019–2020 Evoque L551, specifically for vehicles specified without the memory seat button. Each piece is formed from high-grade ABS plastic with a polished chrome-effect silver finish that harmonises with the Evoque's existing interior brightwork — blending in naturally rather than standing out as an aftermarket addition. The result is a more cohesive, premium-looking door panel that feels as though it left the factory that way. Installation is entirely adhesive-based, using automotive-grade double-sided tape that bonds reliably to the door panel surface without drilling, cutting, or removing any trim. This is a genuine quality-of-life upgrade that takes minutes to fit and delivers a lasting visual improvement every time you open the door. What's Included 🪟 Chrome Door Trim × 4 One piece per door — full set for all four doors 🔧 Pre-Applied Adhesive Tape Automotive-grade bonding — no additional hardware needed 📋 Installation Guidance Step-by-step instructions for a clean, confident fit Product Highlights Precision-engineered for Evoque L551 2019–2020 without memory button High-gloss ABS chrome finish matches factory interior brightwork Full set of four trims — all doors covered in one purchase Pre-applied automotive adhesive tape for tool-free installation Durable ABS construction resists warping, cracking, and UV fade Lightweight at 400g total — no door mechanism impact Silver chrome tone complements both dark and light interior colour schemes Reversible installation — can be removed cleanly if required No drilling, cutting, or panel removal required Immediate visual upgrade to one of the most-used surfaces in the cabin Specifications Specification Detail Material ABS Plastic with Chrome Finish Colour Silver Chrome Item Length 46 cm Item Width 10 cm Item Height 8 cm Item Weight 400 g Quantity 4 pieces (full set) Fitment Type Direct Fit — adhesive mount Compatibility Vehicle Generation Years Trim Variant Fitment Range Rover Evoque L551 2019 Without Memory Button Direct Fit Range Rover Evoque L551 2020 Without Memory Button Direct Fit Range Rover Evoque L551 2019–2020 With Memory Button Not Compatible Range Rover Evoque L538 (1st Gen) 2011–2018 All Not Compatible Range Rover Evoque L551 2021+ All Verify Before Purchase Not sure which specification your Evoque is? Check your door panel around the seat adjustment controls — if there is no memory seat button present, this set is the correct fitment. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–25 minutes  ·  🔩 Tools Required: None Begin with all four door panels at room temperature. Cold surfaces can reduce initial adhesive bond strength — if your vehicle has been parked outdoors in cold weather, allow the interior to warm up for 10–15 minutes before starting. Thoroughly clean each door panel mounting area using an isopropyl alcohol wipe or clean microfibre cloth. Remove any dust, grease, or residue entirely and allow the surface to dry completely. Dry-fit each trim piece to its corresponding door panel to confirm alignment and positioning before removing the adhesive backing. Note any trim clips or panel edges that may affect final placement. Peel the adhesive backing from the first trim piece. Align carefully with the door panel — starting from one end and pressing firmly along the full length to eliminate air gaps and ensure full surface contact. Apply firm, even pressure across the entire trim for 30–60 seconds. This activates the adhesive bond and ensures a secure, lasting fit. Repeat for all four door trims. Avoid applying significant force or stress to the trims for at least 24 hours to allow the adhesive to fully cure. ⚠ Important: These trims are specifically designed for Range Rover Evoque L551 models without the memory seat button. Attempting to fit these trims on a vehicle with the memory button feature will result in incorrect fitment. If you are unsure of your vehicle's specification, please contact our team before ordering — we're happy to help confirm compatibility. Upgrade Your Evoque Interior Today Browse our full collection of Range Rover Evoque L551 accessories and find everything you need to personalise and protect your vehicle — curated by enthusiasts, trusted by owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Range Rover Evoque · Interior Trim Aluminum Alloy Tweeter Speaker Cover Trim – Range Rover Evoque L551 2020 A precision-matched set of two aluminium alloy tweeter speaker covers designed to replace the factory trim on the 2020 Range Rover Evoque L551, delivering a cleaner, more premium cabin finish with zero modification required. Evoque L551 2020 Aluminum Alloy ABS Chrome Interior Trim Tweeter Speaker Cover Set of 2 No Drilling Direct Fit Overview The Range Rover Evoque L551 is one of Land Rover's most design-conscious offerings — a compact luxury SUV that balances bold exterior styling with a refined, detail-led cabin. Owners who spend time inside the Evoque know that the interior details matter, and the factory tweeter speaker surrounds, while functional, can look understated compared to the quality of the rest of the trim. These aluminium alloy tweeter speaker cover trims are engineered specifically for the 2020 Range Rover Evoque, replacing the original surrounds with a more premium-looking finish that incorporates chrome-effect ABS detailing alongside the alloy construction. The result is a subtle but effective cabin upgrade that visually elevates the door or dashboard speaker area without disrupting the Evoque's clean interior design language. Supplied as a matched pair, these covers clip securely into the factory speaker positions using existing mounting points — no adhesives, no drilling, no permanent modification. For Evoque owners who appreciate the finer points of interior presentation, this is one of the most impactful and affordable upgrades available. What's Included 🔊 Tweeter Speaker Cover × 2 Left and right matched pair, aluminium alloy with chrome ABS finish 📦 Protective Packaging Securely packed to prevent transit damage 🔧 Fitting Hardware Clips and retention elements pre-fitted for direct installation Product Highlights Precision engineered for the 2020 Range Rover Evoque L551 High-grade aluminium alloy construction for lasting durability Chrome-effect ABS detailing for a premium OEM-plus appearance Supplied as a matched left and right pair Direct-fit design — uses existing factory mounting points No drilling, cutting, or permanent modification required Enhances the cabin's visual quality without altering acoustics Resistant to fading, cracking, and UV discolouration Simple clip-fit installation achievable in under 15 minutes Compatible with both standard and upgraded tweeter configurations Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 Direct Fit Range Rover Evoque L551 2019 (Pre-facelift) Verify Before Purchase Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery Sport L550 2020+ Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure the vehicle interior is clean and at ambient temperature before beginning installation. Locate the existing factory tweeter speaker covers on the door panel or dashboard — gently apply pressure to the outer edge to release the factory clips. Carefully remove the original covers without applying excessive force; a trim removal tool can be used if preferred to avoid any surface marking. Align the new aluminium alloy cover trim over the tweeter speaker housing, ensuring all clip points are correctly seated. Apply firm, even pressure across the cover until all clips engage and the trim sits flush with the surrounding panel. Repeat for the second cover on the opposite side, then inspect both fittings to confirm a secure, rattle-free installation. Note: Confirm your exact Evoque build year and trim level prior to ordering. The 2020 L551 model year is the confirmed direct fit — earlier L551 production vehicles (late 2018–2019) may differ in speaker housing dimensions. If in doubt, contact us at +44 203 943 9919 before purchasing. Elevate Every Detail Inside Your Evoque The interior of the Range Rover Evoque deserves the same attention to detail as its exterior. Browse the full range of Evoque L551 accessories at Victorious Automotive and save 20% when you pick up any two items together. Shop Range Rover Evoque L551 Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Interior Trim Chrome ABS Water Cup Holder Panel Trim for Range Rover Evoque L551 (2019–2020) A precision-fit chrome accent panel that instantly elevates the cup holder surround of your second-generation Evoque with a refined, factory-quality finish. Evoque L551 2019–2020 ABS Chrome Interior Trim Cup Holder Panel No-Drill Fit Silver Finish ISO9001 Certified Overview The second-generation Range Rover Evoque (L551) set a new benchmark for compact luxury SUVs when it arrived in 2019, introducing a more sophisticated interior architecture with cleaner lines and premium material choices throughout the cabin. It's a vehicle that rewards attention to detail — and the cup holder surround is one of those small areas where aftermarket refinement genuinely makes a difference to the perceived quality of the interior environment. This Chrome ABS Cup Holder Panel Trim is engineered specifically for the 2019–2020 Evoque L551. Manufactured from high-grade ABS with a durable chrome-effect surface treatment, it sits flush over the existing cup holder panel, adding a polished silver accent that complements the Evoque's interior trim lines. The result is a cohesion between centre console elements that feels deliberate and premium rather than afterthought. Installation requires no drilling, no cutting, and no specialist tools. The panel is secured using pre-applied automotive-grade adhesive tape, making it a clean and reversible upgrade that any Evoque owner can complete at home in a matter of minutes. For drivers who care about the details of their interior — this is exactly the kind of finishing touch that makes a difference every time you reach for a drink. What's Included ✦ Cup Holder Panel Trim 1× ABS Chrome decoration panel — pre-cut to fit L551 Evoque 🔲 Adhesive Tape Pre-applied automotive-grade 3M-style double-sided tape 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered for Range Rover Evoque L551 (2019–2020) High-grade ABS construction — impact resistant and lightweight Polished chrome-effect silver finish for a premium aesthetic No drilling, cutting, or modification required Pre-applied automotive adhesive for a secure, lasting bond Sits flush for a factory-integrated appearance ISO9001 certified manufacturing process Lightweight at 200g — no structural load on trim panels Reversible installation — removable without damage Complements OEM chrome and gloss interior accents Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 (1st Gen) 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Discovery Sport L550 2019–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Ensure the cup holder panel area is thoroughly clean and completely dry. Use an isopropyl alcohol wipe to degrease the surface and remove any dust, oils, or residue. Dry-fit the trim panel first — align it carefully to the cup holder surround to confirm positioning before committing to adhesion. Peel the protective backing from the pre-applied adhesive tape, taking care not to touch the adhesive surface. Starting from one end, press the panel firmly into position along the cup holder surround, applying steady pressure across the full length of the trim. Hold the panel in place with firm pressure for 30–60 seconds to allow the adhesive to bond properly. Allow the adhesive to cure at room temperature for a minimum of 2 hours before subjecting the panel to vibration or heat from direct sunlight. ⚠ Important: Do not install in cold or damp conditions — adhesive performance is significantly reduced below 10°C. Verify your exact Evoque model code (L551) before fitting. This panel is designed specifically for 2019–2020 production year vehicles; fitment on later facelifted models cannot be guaranteed without confirmation. Explore the Full Evoque L551 Collection We stock a curated range of interior and exterior accessories designed specifically for the Range Rover Evoque L551 — all engineered to the same standard of fit and finish you'd expect from a premium Land Rover specialist. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious · Range Rover Evoque L551 · Exterior Trim ABS Chrome Rear Trunk Handle Frame Trim – L551 Elevate your Evoque's tailgate with a premium chrome accent trim that's durable, beautifully finished, and installed in minutes. L551 2019–2020 ABS Material Chrome Finish Self-Adhesive No Tools Required Overview The 2019–2020 Range Rover Evoque L551 deserves details that match its refined character. This ABS Chrome Rear Trunk Handle Frame Trim transforms a functional piece into a statement element, catching light and adding visual depth to your tailgate. Manufactured from premium ABS plastic with a mirror-chrome or carbon fiber finish, this trim piece frames the trunk handle with understated elegance. The automotive-grade adhesive ensures a permanent, secure bond without drilling or fasteners—no permanent modification to your vehicle. Whether you're refining your Evoque's exterior or completing a broader customisation programme, this trim delivers the fit, durability, and presence that separates thoughtful owners from casual buyers. What's Included 📦 Rear Trunk Trim Frame Single-piece ABS component 🔧 Pre-Applied Adhesive Tape 3M automotive-grade backing 📋 Installation Guide Step-by-step photo instructions 💼 Victorious Packing Protective transit box Product Highlights Premium ABS construction with real chrome or carbon fibre finish Perfectly engineered for 2019–2020 L551 Evoque tailgate Pre-applied 3M automotive adhesive—no tools or expertise needed Dual finish options: polished silver or weave carbon fibre Lightweight at 200g—zero impact on performance Dimensions: 300mm L × 100mm W × 50mm H ISO9001 certified manufacturing process Resists UV fade and weather degradation 5-minute installation with minimal surface prep 30-day money-back guarantee—fit or return risk-free Compatibility Model Year Variant Status Range Rover Evoque 2019 All trim levels (L551) Direct Fit Range Rover Evoque 2020 All trim levels (L551) Direct Fit Range Rover Evoque 2021+ All variants Not Compatible Range Rover Evoque 2018 and earlier (L538) All variants Not Compatible Note: This trim is engineered exclusively for L551 platform (2019–2020). Fitment on adjacent model years or generation prior (L538) is not guaranteed and not recommended. Installation Difficulty: Very Easy | Time: 5–10 minutes Clean the surface. Use rubbing alcohol or a dedicated automotive cleaner on the rear trunk handle area. Wipe dry with a lint-free cloth and allow 5 minutes of air-drying. Peel the backing. Gently peel away the protective backing from the pre-applied adhesive tape on the trim piece. Avoid touching the adhesive. Align and press. Position the trim frame over the trunk handle, ensuring symmetrical placement. Press firmly from one end to the other, applying even pressure for 10 seconds. Secure bond. Allow the adhesive to cure for 24 hours before exposure to water or extreme temperature. Important: Surface temperature should be between 15–25°C during installation. Do not install in direct sunlight or on a wet surface. Allow the adhesive full cure time (24 hours) before washing the vehicle. Why Victorious We specialise in Range Rover and Land Rover finishing pieces. Every product is tested for fitment, durability, and finish quality before it ships. Our 4.9/5-star rating from over 12,300 verified owners reflects our commitment to detail. If you have any questions about fitment, finish options, or installation, our team is available Monday–Friday, 9am–7pm (GMT) at +44 203 943 9919. Worldwide shipping via DHL, FedEx, UPS, and TNT. Add Polish to Your Evoque Great exterior trim is about intention. This chrome rear trunk frame tells your Evoque's story—one of care and refinement. Ready to upgrade? Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping included ✓ UK support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or an official division of Jaguar Land Rover, the Range Rover brand, or their parent company. All vehicle names and logos are registered trademarks of their respective manufacturers. This product is designed to enhance and personalise your vehicle and does not alter its safety or structural integrity.

Victorious Automotive · Range Rover Evoque L551 · Exterior Styling ABS Black Front Fog Lamp Frame Trim – Range Rover Evoque L551 (2019–2020) A precision-formed ABS fog light surround trim that adds a purposeful, blacked-out finish to the front fascia of the 2019–2020 Range Rover Evoque L551 — no drilling, no fuss. Evoque L551 2019–2020 ABS Plastic Gloss Black Fog Lamp Trim Exterior Styling Adhesive Fit ISO9001 Certified 200g No Drilling Required Overview The Range Rover Evoque L551 — introduced in 2019 — represents Land Rover's most refined interpretation of the compact luxury SUV. Its sculpted front end, with its bold lower fascia and integrated fog lamp housings, is one of the most distinctive design features on the vehicle. Keeping that detailing looking sharp and intentional matters to owners who take pride in every visual aspect of their Evoque. This front fog lamp frame trim is precision-manufactured from high-grade ABS plastic in a deep gloss black finish. Engineered specifically for the 2019–2020 Evoque L551 platform, each piece is contoured to follow the exact profile of the factory fog lamp recess — ensuring a flush, factory-quality appearance that looks like it was always part of the vehicle's design language. Where the standard fog lamp surrounds can appear understated or, over time, show the effects of road grime and UV exposure, this ABS trim overlay introduces a clean, dark contrast that complements both the Evoque's body colour and its wider design intent. The result is a subtly sportier, more defined front end — without modification, body shop visits, or permanent changes to the vehicle. What's Included 🔲 Fog Lamp Frame Trim Set ABS gloss black surround pieces, pre-cut to fit 🔧 Automotive Adhesive Tape Pre-applied 3M-style backing tape for secure fitment 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-moulded specifically for the Evoque L551 (2019–2020) front fog lamp recess High-grade ABS plastic construction — durable, lightweight, and UV-resistant Gloss black finish adds a bold, blacked-out contrast to the front fascia Adhesive-backed installation — no drilling, cutting, or permanent modification ISO9001-certified production quality for consistent fit and finish Weighs just 200g — no impact on vehicle aerodynamics or performance 31cm × 15cm × 5cm — engineered to match OEM fog lamp housing dimensions Resistant to road wash, car cleaning products, and everyday weathering Fully reversible — remove cleanly without damage to original paintwork Enhances the Evoque's front-end presence with a more defined, sporty character Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the fog lamp surround area on your Evoque's front bumper using isopropyl alcohol or a panel wipe — remove all dirt, wax, and grease residue for maximum adhesion. Allow the surface to dry completely. In cold weather, gently warm the bumper surface and the adhesive backing with a heat gun or hairdryer to improve bond strength. Dry-fit each trim piece without removing the adhesive backing to confirm alignment and positioning before committing to placement. Peel back the adhesive tape backing and carefully align the trim piece from one edge, pressing firmly along the full length to avoid air pockets or misalignment. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before washing the vehicle. ⚠ Note: Do not install in temperatures below 5°C (41°F) as this may significantly reduce adhesive performance. Ensure the bumper surface is completely dry and free of silicone-based products prior to fitting. This trim is designed for the 2019–2020 Evoque L551 only — do not attempt to fit to earlier L538 models as the fog lamp housing dimensions differ. Complete Your Evoque's Look Explore the full range of exterior styling accessories for the Range Rover Evoque L551 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious · Range Rover & Discovery · Interior Trim Real Carbon Fiber Gear Shift Knob for Range Rover & Land Rover Discovery Premium carbon fiber shift knob that elevates your interior with authentic motorsport styling and a lightweight, durable finish. Carbon Fiber 2017–2018 Range Rover Discovery 50g Lightweight Easy Install Overview If you drive a Range Rover or Land Rover Discovery from 2017–2018, you know every detail matters. Your shift knob is one of the first things your hand touches every time you drive. Factory plastic simply doesn't cut it for owners who demand the same precision and refinement as their vehicle. This real carbon fiber gear shift knob replaces that stock cover with premium engineering. It's constructed from high-quality ABS with a genuine carbon fiber finish, delivering the aggressive aesthetic of a performance vehicle without compromising on durability or fit quality. At just 50 grams, it's lighter than it looks, and it bolts down with adhesive tape for a bulletproof installation—no tools, no risk of damaging your interior trim. Whether you're upgrading for daily driving confidence or preparing for a full interior refresh, this shift knob sets the tone. It's the kind of detail that separates owners who care about their vehicles from everyone else. What's Included ✦ Carbon Fiber Shift Knob Cover Ready to install, pre-fitted for 2017–2018 models ✦ Adhesive Mounting Tape 3M-grade automotive tape for permanent hold ✦ Installation Guide Step-by-step instructions for flawless fitment Product Highlights Genuine carbon fiber finish with ABS durability backbone Featherweight at 50g—no added mass to your shift mechanism Direct fit for Range Rover Vogue and Discovery 3/4/5 (2017–2018) Premium motorsport aesthetic with zero compromise on comfort Adhesive installation—no drilling, no permanent modification ISO 9001 certified manufacturing for consistent quality Resistant to daily wear, UV exposure, and heat cycling Maintains factory ergonomics while upgrading visual presence Perfect companion to carbon interior trim upgrades 30-day money-back guarantee from Victorious Automotive Compatibility Vehicle Model Year Range Fitment Range Rover Vogue 2017–2018 Direct Fit Land Rover Discovery 3 2017–2018 Direct Fit Land Rover Discovery 4 2017–2018 Direct Fit Land Rover Discovery 5 2017–2018 Direct Fit Range Rover Sport 2017–2018 Direct Fit Jaguar XE 2017–2018 Not Compatible Always verify your vehicle's exact year and model before checkout. Contact us at +44 203 943 9919 if you're unsure about fitment. Installation Difficulty: Beginner | Time: 5 minutes Remove your vehicle's existing shift knob cover by gently prying away from the base with a plastic lever tool. Clean the underlying shift knob surface with a soft microfiber cloth to remove dust and oils. Peel the adhesive tape backing and align the new carbon fiber knob cover with the shift mechanism. Press firmly into place, holding for 10 seconds to ensure full tape contact. Allow 24 hours for the adhesive to cure before normal driving. ⚠ Before you start: If your shift knob is particularly textured or dirty, wipe with a 50/50 isopropyl alcohol and water solution. Let dry completely before applying tape. This ensures maximum bond strength. Own Your Interior Premium interiors are built on details. This carbon fiber shift knob tells the world you don't settle for stock. Upgrade now and feel the difference every time you shift. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money Back ✓ 4.9★ Rated (12,300+ reviews) ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Ltd. All vehicle names and model designations are registered trademarks of their respective manufacturers, used solely for identification and compatibility purposes.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Window Controls Frame for Land Rover Range Rover Evoque 2012–2017 A precision-cut carbon fibre interior trim panel designed to replace the factory window controls surround on the Range Rover Evoque L538 — adding a distinctly sporting, high-tech aesthetic to one of the cabin's most-touched surfaces. Evoque L538 2012–2017 Carbon Fibre Interior Trim Window Controls Frame Direct Fit No Drilling ISO9001 Certified AJLN1009 Overview The Range Rover Evoque L538 arrived in 2011 as a bold, design-forward compact SUV that quickly built a loyal following among drivers who wanted Range Rover presence in a more agile package. The interior — in particular the door panel area surrounding the window and mirror controls — is a highly visible surface that owners interact with on every journey. Over time, the factory finish can show wear or simply feel at odds with a more personalised cabin aesthetic. This carbon fibre window controls frame from Bosoner (model AJLN1009) is engineered specifically to the original dimensions of the Evoque L538's door panel, covering the factory surround with a clean, genuine-look carbon fibre finish. The weave pattern delivers that characteristic depth and sheen associated with motorsport-grade materials, transforming a frequently touched detail into a visual focal point without any permanent modification to your vehicle. Manufactured to ISO9001 quality standards, the trim uses a 3M-grade adhesive backing that bonds securely to the factory surface and resists vibration, UV fading, and everyday handling. If you're building a cohesive dark or sport-themed interior, this piece sits naturally alongside carbon fibre gear surround trims, dashboard overlays, and door handle covers — all available in the Evoque collection at Victorious. What's Included 🪟 Window Controls Frame Carbon fibre overlay panel, cut to OEM dimensions for the Evoque L538 door panel 🔲 Pre-Applied Adhesive 3M-grade backing tape pre-fitted for clean, tool-free installation 🧽 Cleaning Wipe Surface prep wipe included to ensure a strong, lasting bond 📄 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine-look carbon fibre weave finish with deep gloss clarity Precision-cut to OEM dimensions — no trimming or modification required Pre-applied 3M-grade adhesive for a secure, lasting bond Tool-free installation — no drilling, no clips, no professional fitting needed ISO9001 certified manufacturing for consistent quality control UV-resistant coating prevents fading and dulling over time Scratch and abrasion resistant surface — ideal for high-touch areas Fully reversible — can be removed without damaging the factory panel Pairs seamlessly with other Evoque carbon fibre interior trim pieces Lightweight construction — zero impact on door mechanism or electrics Compatibility Vehicle Model Code Year Range Compatibility Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Evoque L538 2018–2019 Verify Before Purchase Range Rover Evoque L551 (2nd Gen) 2019–2025 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Park your Evoque in a clean, dry environment at room temperature. Cold or damp conditions can reduce initial adhesive strength. Use the included cleaning wipe (or isopropyl alcohol) to thoroughly degrease the factory window controls surround on the door panel. Allow to dry completely — at least 60 seconds. Dry-fit the carbon fibre frame over the factory panel to confirm alignment before committing. Note the orientation and any cutouts around buttons or controls. Peel back a small section of the adhesive backing and carefully align the trim piece to the top or one edge of the factory surround before pressing down progressively across the surface. Apply firm, even pressure across the entire panel for 30–60 seconds to fully activate the adhesive bond — use the heel of your hand rather than fingers to avoid uneven pressure points. Allow 24 hours before washing the vehicle or exposing the trim to prolonged moisture, giving the adhesive time to fully cure. Note: If your Evoque has an aftermarket door panel, a previous adhesive residue, or a textured fabric insert around the controls area, surface adhesion may vary. Clean thoroughly and consider a small patch test before full application. For late 2017 or 2018 facelift Evoque models, please confirm your door panel style matches the pre-facelift design prior to ordering. Upgrade Your Evoque Interior Browse the full Range Rover Evoque L538 interior collection at Victorious — from carbon fibre dashboard trims to gear surround overlays, curated for owners who care about every detail. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify fitment against your specific vehicle's build date and trim specification before purchase.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Gear Shift Surround for Range Rover Evoque L538 (2012–2017) A precision-cut carbon fibre gear shift surround that brings a purposeful, motorsport-inspired aesthetic to the Evoque's centre console — with a factory-fit finish and no permanent modification required. Range Rover Evoque L538 2012–2017 Carbon Fibre Gear Shift Surround Interior Trim No Drilling Required ISO9001 Certified Direct Fit Model: AJLN1009 Overview The Range Rover Evoque L538 — launched in 2011 and built through to 2018 — established itself as a design-forward compact SUV that balanced urban composure with genuine Land Rover capability. Its interior, while well-appointed from the factory, offers a strong foundation for owners who want to personalise and elevate their cabin without compromising its premium character. The centre console in particular is a focal point — one of the most visually prominent surfaces in daily use. This carbon fibre gear shift surround is designed specifically for the 2012–2017 Evoque L538, machined and finished to replicate the exact contours of the OEM surround piece. The real carbon fibre weave construction — not a carbon-look vinyl wrap or printed film — delivers a genuine depth and texture that the factory plastic simply cannot match. It adds a layer of visual sophistication that feels like it belongs, not like an afterthought. Whether you spend your weekday commute or weekend escapes inside this cabin, small details like this shift the whole atmosphere. The carbon weave catches light differently at every angle, the trim aligns flush with surrounding surfaces, and the fit is secure without drilling, adhesive residue risk, or professional installation. It's the kind of upgrade that Evoque owners notice on first glance and appreciate every time they reach for the gear selector. What's Included 🔲 Carbon Fibre Gear Shift Surround Pre-cut to OEM shape for direct replacement 🔧 Fitting Hardware Clips and adhesive backing for secure fitment 📄 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Individually packaged to prevent transit damage Product Highlights Genuine carbon fibre construction — not a printed film or vinyl wrap Precision-cut to match the OEM gear shift surround profile exactly Finished with a high-gloss lacquer for depth, clarity and durability ISO9001 certified manufacturing process for consistent quality control Secure fitment using clips and adhesive — no drilling or cutting required Designed specifically for the Range Rover Evoque L538 2012–2017 Lightweight material adds no meaningful weight to the cabin Protects the underlying console surface from daily wear and scuffing Compatible with both left-hand and right-hand drive configurations Reversible installation — original trim can be refitted if required Compatibility Vehicle Code Year Range Fitment Range Rover Evoque (Original) L538 2012–2017 Direct Fit Range Rover Evoque (Original) Facelift L538 2018–2019 Verify Before Purchase Range Rover Evoque (Second Gen) L551 2019–2025 Not Compatible Range Rover Velar L560 2017–2025 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Land Rover Discovery Sport L550 2015–2025 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Ensure the centre console and gear shift surround area is clean, dry and free from dust or grease before beginning. Carefully remove the original gear shift surround trim piece from the console — it is typically held in place by retaining clips and can be gently prised free using a trim tool or flat-bladed implement wrapped in cloth to protect surrounding surfaces. Dry-fit the carbon fibre surround to confirm alignment with the console opening and all surrounding trim edges before committing to final fitment. Where adhesive backing is used, remove the protective film and press the surround firmly into position, applying even pressure across the surface for a minimum of 30 seconds. Where clips are provided, engage each clip fully until you hear or feel a secure click into the corresponding recess. Step back and inspect the fit from multiple angles. Ensure no edges are proud of the surrounding surface and that alignment is consistent on all sides. Note: If your Evoque is a 2018 facelift model, please verify the console layout against your existing trim piece before fitting. Minor design changes were introduced during the late L538 production run that may affect clip alignment. If in any doubt, contact us on +44 203 943 9919 before installation. Upgrade Your Evoque's Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-crafted interior upgrades. Browse the full Evoque L538 collection or speak with our team Monday to Friday, 9am–7pm. Shop All Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L538 · Lighting Upgraded Facelift-Style Rear Tail Light Assembly — Range Rover Evoque L538 (2010–2018) Bring your Evoque's rear lighting in line with the post-2016 facelift aesthetic — supplied as a complete pair, ready to fit in under an hour. Evoque L538 2010–2018 Facelift Style Sold as Pair PC + ABS Housing 12V OE Ref: LR072649 / LR072648 3 & 5 Door Pure · Prestige · Dynamic Overview The Range Rover Evoque L538 remains one of Land Rover's most recognisable compact SUVs — its sharp lines and premium detailing have aged gracefully since the model's 2011 debut. For owners of the pre-facelift variants (2011–2015), the rear lighting is one of the most visible styling differences between their car and the refreshed 2016-onwards version. The facelift brought a more sophisticated square inner light design that gave the Evoque a noticeably more modern, upmarket rear-end presence. This tail light assembly set replicates that 2016 facelift style exactly — supplied as a matched left and right pair, finished in PC+ABS composite housing for durability and clarity. Whether you're replacing a damaged unit or simply upgrading the look of an earlier Evoque, these lights deliver a seamless, factory-style result. They cross-reference directly to OE part numbers LR072649 and LR072648, ensuring correct fitment geometry and connector compatibility. Crucially, these fit all body styles and all trim levels of the Evoque L538 — Pure, Prestige and Dynamic, in both 3-door and 5-door configurations. No wiring modifications are required. If you're bringing your pre-2016 Evoque up to facelift spec, this is one of the most impactful and cost-effective changes you can make. What's Included 🔴 Driver Side Tail Light Right-hand rear assembly, facelift square design 🔴 Passenger Side Tail Light Left-hand rear assembly, matched pair 🔌 OE-Style Connectors Plug-and-play compatibility with existing loom 📦 Protective Packaging Each unit individually packed for safe transit Product Highlights Facelift 2016+ square inner light design replication Supplied as a complete left and right pair Fits all Evoque L538 trims — Pure, Prestige, Dynamic Compatible with both 3-door and 5-door body styles PC+ABS composite housing — impact and UV resistant 12V direct plug-and-play — no wiring modifications needed Cross-references OE part LR072649 / LR072648 Ideal upgrade for 2011–2015 pre-facelift Evoque owners Straight replacement for 2016–2018 facelift Evoque owners CCC externally tested and certified Compatibility Vehicle Year Range Body Style Trim Fitment Range Rover Evoque L538 2016–2018 3-Door & 5-Door All Trims Direct Fit Range Rover Evoque L538 2011–2015 3-Door & 5-Door Pure, Prestige, Dynamic Upgrade Fit Range Rover Evoque L538 2010 3-Door & 5-Door All Trims Upgrade Fit Range Rover Evoque L551 2019–2026 All All Not Compatible Range Rover Velar 2017–2026 All All Not Compatible Discovery Sport L550 2014–2026 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: T20 Torx, Trim Removal Tool Open the tailgate and locate the trim panel covering the inner tail light mounting points on each side of the load bay. Using a trim removal tool, carefully prise away the inner boot trim panel to expose the rear light securing bolts or clips. Using a T20 Torx driver, remove the retaining fasteners holding the tail light assembly to the body. Gently pull the light assembly rearward away from the body panel. Avoid forcing — some adhesive sealant may be present on older units. Disconnect the wiring loom connector from the back of the existing assembly. Note the connector orientation. Connect the wiring loom to the new light assembly and confirm the connector clicks securely into place. Position the new assembly into the aperture, ensuring the alignment tabs locate correctly, then re-secure the fasteners. Refit the boot trim panel and test all light functions — brake, indicator, reverse and fog — before driving. ⚠ Note: These are aftermarket assemblies and are not sourced from Land Rover or Jaguar Land Rover. Always test all light functions thoroughly before returning the vehicle to normal use. If in doubt, consult a qualified automotive electrician or Land Rover specialist. Upgrade Your Evoque's Rear End Today One of the most impactful visual changes you can make to a pre-facelift Evoque — supplied as a complete pair and ready to fit. Explore the full Range Rover Evoque L538 accessories collection at Victorious Automotive. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. OE part numbers LR072649 and LR072648 are referenced for fitment identification purposes only. All trademarks remain the property of their respective owners.