Products

Victorious · Mercedes-Benz · Interior Trim 5-Piece Carbon Fiber Window Lift Switch Frame Trim for Mercedes-Benz Premium ABS carbon fiber accents transform your window control panel with a sleek, modern finish that elevates cabin aesthetics instantly. W176 / W204 / W212 / W166 2008–2023 Carbon Fiber Finish High-Grade ABS Direct-Fit 5-Piece Set Overview Whether you drive a Mercedes-Benz A-Class, B-Class, C-Class, E-Class, GLE, GLA, CLA, or GLK, the interior details matter. This 5-piece carbon fiber window lift switch frame trim set is engineered to give your cabin a refined, contemporary appearance while maintaining the premium feel of your vehicle. Crafted from high-quality ABS material with an authentic carbon fiber finish, each trim piece is precision-molded to fit your specific door panel. The finish resists fading and maintains its lustrous appearance for years, even in high-touch areas. Installation is straightforward—using adhesive backing, you'll have a factory-quality upgrade completed in under 30 minutes. This is an ideal choice for owners seeking a subtle yet impactful cabin refresh. The carbon fiber aesthetic complements both modern and classic Mercedes interiors, adding visual depth without overwhelming the dashboard. What's Included ⬚ Window Switch Trim Pieces 5 pre-cut ABS panels ready to install 🧴 Adhesive Backing Tape High-strength automotive-grade adhesive 🧻 Cleaning Cloth Prepare surfaces for optimal adhesion 📋 Installation Guide Step-by-step instructions with diagrams Product Highlights Authentic carbon fiber finish with protective UV coating Durable ABS construction resists cracking and warping Precision-fit design for seamless door panel integration Pre-applied automotive-grade adhesive tape for secure installation No drilling or modification required Maintains original switch functionality and accessibility Fade-resistant and easy to clean with standard panel wipes Compatible across multiple W-series chassis generations Adds perceived value and refresh to cabin aesthetics Backed by 30-day money-back guarantee Compatibility Chart Mercedes-Benz Model Chassis Code Years Fit Status A-Class W176 2012–2018 Direct Fit C-Class W204 2007–2014 Direct Fit E-Class W212 2009–2016 Direct Fit M-Class / GLE W166 2011–2019 Direct Fit GLA-Class C117 2013–2021 Direct Fit CLA-Class C117 2013–2019 Direct Fit GLK-Class C204 2008–2015 Direct Fit B-Class W246 2011–2018 Direct Fit Tip: Confirm your exact chassis code before ordering. Check your registration or door jamb label for the W-code. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation Difficulty: Beginner | Time: 20–30 minutes Prepare the surface: Clean the window switch panel thoroughly with the provided cloth to remove dust, oils, and debris. Dry completely and allow 5 minutes for alcohol-based cleaners to evaporate. Test fit each piece: Before removing adhesive backing, position each trim piece on the switch panel to confirm alignment and ensure proper fit across all five pieces. Remove backing tape: Carefully peel the adhesive backing from the first trim piece, starting from one corner to avoid air bubbles. Apply the trim: Press the piece firmly onto the switch panel using consistent pressure across the entire surface. Hold for 10–15 seconds to set the adhesive. Repeat for remaining pieces: Install the remaining four trim pieces using the same method, working systematically from top to bottom. Final check: Allow the adhesive to cure for 24 hours before using the window switches. Avoid contact with the newly installed trim during this period. Important: Do not force or flex the switches while the adhesive is curing. If a piece begins to lift, gently remove it and reapply fresh adhesive for best results. Why Choose This Trim Set Mercedes-Benz interiors demand precision. These trim pieces aren't afterthoughts—they're engineered to match OEM panel fitment standards while delivering the visual upgrade you're looking for. The carbon fiber finish pairs seamlessly with any Mercedes cabin, from minimalist modern design to layered luxury dashboards. Unlike cheap plastic overlays that yellow or peel, this ABS construction maintains colour fidelity and structural integrity. The adhesive is automotive-grade, tested for temperature fluctuations and humidity resistance across European climates. Plus, installation requires no tools, no drilling, and no dealer visits—just 20 minutes and your cabin feels brand new. Ready to Upgrade Your Cabin? Transform your Mercedes window controls with this premium carbon fiber trim set. Direct-fit, durable, and designed to impress every time you adjust your windows. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 Expert support: +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with Mercedes-Benz AG, Daimler, or any official Mercedes-Benz distributor. All vehicle names and logos are trademarks of their respective owners. This product is designed for fitment and aesthetic enhancement only and does not alter or compromise vehicle safety systems or structural integrity.

Victorious Automotive · Land Rover / Range Rover · Interior Trim Chrome Volume & Air Conditioning Knob Covers – Land Rover Discovery 4 LR4 · Range Rover Sport L320 · Freelander 2 A set of five precision-fit chrome trim rings that restore a premium, tactile feel to your climate and audio controls — permanently eliminating the notorious sticky rubber degradation found on these generation Land Rovers. L320 Range Rover Sport Discovery 4 / LR4 Freelander 2 2005–2013 Chrome / Silver 5-Piece Set No-Drill Fit Interior Trim Climate Controls Volume Knob Why These Knobs Matter Owners of the Range Rover Sport L320, Discovery 4, and Freelander 2 will be well familiar with one of the most irritating age-related issues these vehicles develop: the soft-touch rubber coating applied to the climate control and audio volume knobs begins to degrade, leaving behind a persistently tacky, unpleasant surface that attracts grime and simply cannot be cleaned away. It is not a fault of neglect — it is a characteristic of the OEM rubber compound used across this era of Land Rover interiors, and virtually every example of sufficient age will eventually suffer from it. These chrome knob covers are engineered specifically to address exactly that problem. Designed to slip directly over the existing knobs on your centre console, they introduce a hard-wearing, chrome-finished surface that feels solid and premium underhand — a significant step up from the original tactile coating even before it degraded. The five-piece set covers all key rotary controls across the climate and audio panel, giving the cabin a cohesive, refreshed appearance. Rather than sourcing individual OEM replacement knobs at significant cost, or living with the stickiness indefinitely, this set offers a clean, cost-effective, and visually superior resolution. Once fitted, the transformation is immediate — both in feel and in the overall impression the interior makes. For owners who take pride in the condition of their vehicles, these covers represent one of the most satisfying and practical interior upgrades available for these models. What's Included 🎚️ Volume Control Cover Chrome ring for main audio volume rotary knob ❄️ Air Con Knob Covers × 4 Chrome trim rings for climate control rotaries 📦 Full 5-Piece Set Everything needed to refresh all rotary controls 🔧 No Additional Hardware Clip-over fit — no tools or adhesives required Product Highlights Directly resolves the sticky rubber degradation on OEM knobs Chrome silver finish — cohesive with brushed trim on these models Set of 5 covers all climate and audio rotary controls No drilling, cutting, or permanent modification required Hard-wearing surface — far more durable than original rubber Precision moulded for exact fitment on L320, LR4, and FL2 Instantly elevates the look and feel of the centre console Easy to clean — does not accumulate residue like OEM coating Reversible installation — original knobs remain intact beneath Fraction of the cost of OEM replacement knob assemblies Compatibility Vehicle Code Years Fit Range Rover Sport L320 2005–2013 Direct Fit Land Rover Discovery 4 / LR4 L319 2009–2016 Direct Fit Land Rover Freelander 2 L359 2006–2014 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible If your vehicle is not listed above or you are unsure of your specific build, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and turn off the ignition. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight — this makes the existing knobs easier to work with. If the OEM knobs are visibly sticky, wipe them down lightly with an isopropyl alcohol cloth and allow to dry fully. This ensures the chrome cover seats cleanly against the base knob. Align each chrome cover over its corresponding rotary knob. The covers are designed to push on with light, even pressure — do not force. You should feel a positive seat as the cover locates correctly. Work through all five knobs methodically, confirming each cover is level and centred before moving to the next. Test each control to confirm full rotation and normal function is maintained. No function should be impeded by the covers. Note: Do not use excessive force when seating the covers. If a cover feels misaligned, remove and re-seat rather than pressing harder. Ensure the base knobs are clean and dry before fitting — any residue may prevent a flush seating. Restore Your Interior. Right Now. The sticky knob problem is one of the most common complaints from owners of this generation of Land Rovers — and one of the easiest to solve. These chrome covers ship worldwide via DHL, FedEx, UPS, and TNT, and are backed by our 30-day money-back guarantee. Shop Range Rover Sport L320 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Toyota Land Cruiser LC300 · Exterior Emblems 70th Anniversary Logo Emblem – Toyota Land Cruiser Prado 200 LC300 FJ200 (2008–2022) A premium silver electroplated 70th Anniversary emblem crafted to commemorate Toyota Land Cruiser heritage — a refined exterior detail for the discerning LC300 owner. LC300 FJ200 Prado 200 2008–2022 Silver Electroplated Adhesive Fit Exterior Emblem Anniversary Edition Style No Drilling Required Overview The Toyota Land Cruiser has earned its legendary status over seven decades of uncompromising engineering — a vehicle trusted across continents, terrain types, and generations. The LC300, FJ200, and Prado 200 represent the pinnacle of that lineage: refined, capable, and commanding in equal measure. Every detail on these vehicles carries meaning, and the exterior emblem is no exception. This 70th Anniversary Logo Emblem is designed to pay tribute to that remarkable heritage. Finished in a premium silver electroplated coating, the emblem carries the visual weight and precision you'd expect from a commemorative accessory — not a generic aftermarket add-on. Whether you're building a curated anniversary-spec build or simply want to acknowledge what your Land Cruiser represents, this emblem does it with restraint and class. Installation requires no specialist tools or vehicle modifications. The emblem mounts securely via industrial-grade adhesive, leaving no permanent marks and delivering a factory-flush finish when applied correctly. It's a small detail that makes a definitive statement — exactly how the best exterior modifications should work. What's Included 🏅 70th Anniversary Emblem 1x Silver Electroplated logo badge — ready to fit 🔧 Adhesive Mounting Tape Pre-applied or included adhesive for secure bonding 📋 Fitting Guidance Basic installation reference included with order Product Highlights Commemorates 70 years of Toyota Land Cruiser excellence Premium silver electroplated finish — resists tarnishing and UV fading Designed to complement factory exterior trim lines Compatible with 2008–2022 LC300, FJ200, and Prado 200 Adhesive installation — no drilling, no damage, no downtime Adds a distinctive anniversary-spec detail to any build Lightweight construction — no impact on panel integrity Suitable for bonnet, tailgate, door pillar, or interior application Sharp, defined badge lettering with premium raised profile An ideal finishing touch for modified and stock LC builds alike Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser LC300 / FJ200 2008–2022 All Variants Direct Fit Toyota Land Cruiser Prado 200 2008–2022 All Variants Direct Fit Toyota Land Cruiser LC250 2024+ All Variants Verify Before Purchase Toyota Land Cruiser 70 Series All Years All Variants Not Compatible Toyota Hilux / 4Runner All Years All Variants Not Compatible If your vehicle is not listed above, please contact us before ordering. Our team is happy to confirm compatibility. Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 Minutes  |  🔩 Tools Required: None Select your preferred mounting location — bonnet leading edge, tailgate panel, or door pillar are common choices on the LC300 and FJ200. Thoroughly clean the target surface using an isopropyl alcohol wipe to remove all wax, grease, and contaminants. Allow to dry completely — do not rush this step. Hold the emblem against the surface and mark your intended position with low-tack masking tape guides to ensure perfectly level alignment before committing. Peel the adhesive backing from the emblem. Do not touch the adhesive surface once exposed. Align carefully to your guide marks and press the emblem firmly onto the surface. Apply sustained hand pressure across the entire emblem for 30–60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the emblem to rain or moisture. ⚠ Important: Surface temperature should be between 15°C and 35°C for optimal adhesive performance. Do not attempt installation in direct sunlight, cold conditions, or on wet paintwork. Applying to freshly polished or ceramic-coated surfaces may reduce adhesion — lightly abrade the contact area if necessary. Explore More LC300 Accessories Building out your Land Cruiser? Browse our full range of LC300 exterior and interior upgrades — curated specifically for the FJ200, Prado 200, and LC300 platform. → Shop All LC300 Accessories Toyota LC250 Collection Victorious Automotive Over 12,300 verified owners trust Victorious for premium vehicle accessories. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop the LC300 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or officially associated with Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only.

Victorious Automotive · Universal · Maintenance & Recovery 7500mAh Portable Car Air Compressor 12V Wireless, battery-powered tyre inflation for Land Rovers, Range Rovers, and adventure vehicles — inflate anywhere, anytime. Universal Fit 7500mAh Battery 54W Power 4-5 Hour Charge Aluminum Alloy Wireless Design Overview Whether you're exploring remote trails in your Defender, Range Rover, or Land Rover Discovery, roadside tyre pressure issues shouldn't stop your adventure. This 7500mAh Portable Car Air Compressor delivers professional-grade inflation capability without the bulk of traditional compressors, making it an essential addition to any serious 4x4 kit. The compressor features a robust 54W power output and aluminum alloy construction, designed to handle everything from car and SUV tyres to bicycles, motorcycles, and sports equipment. With a 7500mAh lithium battery rated for 4–5 hours of charging, you'll have multiple fill-ups stored between charges — perfect for multi-day expeditions or emergency roadside repairs. Its compact, wireless design means it stows easily in the glove box, door bin, or recovery kit without sacrificing durability. Pressure readings are simple and intuitive, letting you set exact PSI for your vehicle type — critical for maintaining tyre integrity on varied terrain and road speeds. What's Included ⚡ 7500mAh Battery Pack Rechargeable lithium battery with 4–5 hour charge cycle 🔌 12V Charging Cable USB or standard DC charger included for home and vehicle use 🎚️ Pressure Display Screen Digital readout with preset modes for cars, SUVs, bikes, and balls 🧰 Nozzle Adapter Set Three universal adapters for car valves, Schrader, and Presta compatibility 🎒 Compact Carry Pouch Protective neoprene case sized for glove box or recovery pack storage 📖 User Guide & Warranty Card Multi-language documentation with troubleshooting and pressure references Product Highlights 54W Peak Power Output — Rapid inflation cycles; fills most car tyres in 2–3 minutes 7500mAh Lithium Battery — Hold enough charge for 5–8 tyre fills between recharges Aluminum Alloy Housing — Lightweight, corrosion-resistant, built for rough handling Digital Pressure Gauge — Real-time PSI display with auto-shutoff at target pressure Universal Nozzle Adapters — Compatible with car, motorcycle, bicycle, and sports equipment valves Wireless & Portable — No hoses to manage; fits easily in glove box or recovery kit 4–5 Hour Full Charge — Standard USB or 12V car charger; ready in time for next trip Quiet Operation — Under 85dB; won't disturb camp or other trail users Preset Inflation Modes — Automatic profiles for cars, SUVs, bikes, and sports balls Cold Weather Rated — Functions reliably in temperatures down to –10°C Compatibility Vehicle Type Tyre Valve Compatibility Land Rover Defender L663 Schrader Direct Fit Range Rover Vogue L460 / L405 Schrader Direct Fit Range Rover Sport L461 / L494 Schrader Direct Fit Land Rover Discovery 5 / 4 Schrader Direct Fit Range Rover Evoque L551 / L538 Schrader Direct Fit Range Rover Velar Schrader Direct Fit Toyota Land Cruiser LC250 / LC300 Schrader Direct Fit Mercedes-AMG G Class Schrader Direct Fit Bicycles & Motorcycles Presta / Dunlop With Adapter Sports Equipment (Balls) Needle Valve With Adapter Installation & Use Notes Quick Setup Guide Charge the Battery: Connect the 12V USB cable to the compressor. Use a wall outlet (4–5 hours) or car charger (6–7 hours) for full charge. Status LED will turn green when ready. Select the Nozzle Adapter: Choose the correct valve adapter for your tyre type. Push firmly into the compressor outlet until it clicks. Attach to Tyre Valve: Screw or snap the adapter onto your tyre valve, ensuring a tight seal. Check for air leaks. Set Target Pressure: Use the digital display and control buttons to set your desired PSI. Consult your vehicle's door jamb placard or owner's manual for recommended pressures. Start Inflation: Press the start button. The compressor will inflate and automatically stop at your target pressure. Remove and Store: Disconnect from the tyre valve. Store the compressor and adapters in the included carry pouch in your vehicle. Important: Always verify your vehicle's correct tyre pressure before inflation. Over-inflation can damage tyres and affect handling. Check pressure monthly and before long journeys. Do not use on tyres showing visible damage or while driving on the motorway. Ready to Inflate Anywhere? Keep your Land Rover, Range Rover, or adventure vehicle mission-ready with wireless, battery-powered tyre inflation on demand. Whether you're expeditioning off-road or recovering from a slow puncture on the motorway, this compact compressor belongs in every serious 4x4 owner's kit. Shop Portable Air Compressor Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews 📞 +44 203 943 9919 – Mon–Fri 9am–7pm ✓ 30-day money-back guarantee 🌍 Worldwide shipping – DHL, FedEx, UPS, TNT Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, or Mercedes-Benz. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility is based on standard valve types; always verify before purchase. This compressor is designed for recreational and emergency roadside use and does not replace professional tyre service.

Mercedes · W213 E-Class · Exterior Trim 8-Piece Carbon Fiber Window Trim Set for Mercedes E-Class W213 2016–2019 Premium carbon fiber window moulding with direct-fit design—aggressive stance, flawless finish in minutes. W213 2016–2019 Carbon Fiber Window Trim E200 / E300L AMG Compatible Overview The Mercedes-Benz E-Class W213 is the definition of modern luxury—refined proportions, sculpted surfaces, premium engineering. This 8-piece carbon fiber window trim set takes that sophistication further. Each moulding traces the perimeter of your side windows, catching light and adding depth to your sedan's profile. It's the kind of detail only the driver notices until someone else asks about it. Constructed from genuine carbon fiber with a shiny silver accent finish, these trims integrate seamlessly with your E-Class's design language. ISO9001 certified manufacturing ensures consistency and durability. Installation is straightforward—precision-cut pieces, strong adhesive backing, no drilling required. Your windows will have presence. Perfect for E200, E300L, and AMG-trimmed variants. Whether you're keeping your E-Class factory-fresh or building a more assertive look, this set delivers understated aggression without compromise. What's Included ✦ 8× Carbon Fiber Window Mouldings Front and rear side windows, driver and passenger ⚙ Strong Adhesive Backing Premium pre-applied, ready to install 📋 Fitment Guide Vehicle-specific layout and prep instructions Product Highlights Genuine carbon fiber construction with shiny silver finish accent ISO9001 certified manufacturing—consistent quality, engineered to last Custom-designed for W213 E200, E300L, E300, E350, and AMG variants Pre-cut and pre-fitted for precise, gap-free alignment Strong adhesive backing—no drilling, no modification required Lightweight material adds visual impact without load penalty Easy 15–20 minute installation on clean, dry surface Weather-resistant and UV-stable finish Enhances side profile with aggressive, premium aesthetic Direct replacement—no tools or professional fitting needed Compatibility Model / Year Range Compatibility Mercedes E200 W213 (2016–2019) Direct Fit Mercedes E300L W213 (2016–2019) Direct Fit Mercedes E300 W213 (2016–2019) Direct Fit Mercedes E350 W213 (2016–2019) Direct Fit Mercedes AMG E63 W213 (2016–2019) Direct Fit Mercedes E-Class W212 (2009–2016) Not Compatible Mercedes E-Class W207 Coupe Not Compatible Installation Notes Difficulty: Easy · Time: 15–20 Minutes Clean the surface: Wash all window frame areas with mild soap and water. Dry completely with a microfiber cloth. Any dust or residue will reduce adhesive grip. Inspect the trims: Lay out all 8 pieces. Verify fit against your windows before removing backing tape. Remove backing tape: Starting with the driver's side front window, peel back the adhesive tape slowly. Apply the trim: Press firmly along the entire window moulding, working from top to bottom. Hold for 10 seconds per section to set the adhesive. Repeat for remaining windows: Apply to passenger side, then both rear windows. Take your time—adhesive sets quickly but benefit from firm, even pressure. Allow curing time: Leave your vehicle untouched for 24 hours before washing or exposing trims to moisture. Important: Ensure the application surface is thoroughly cleaned and completely dry. Do not install in direct sunlight or extreme heat. Optimal adhesion occurs in temperatures between 15–25°C. If you need to reposition a trim, gently peel it back and reapply within 2 minutes of initial contact. Elevate Your E-Class Carbon fiber window trims are the subtle detail that commands attention. Premium materials. Precision fit. Flawless finish. Transform your W213 E-Class profile in under 20 minutes. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes-Benz distributor. Mercedes, E-Class, AMG, and all related marks are registered trademarks of their respective owners. This product is designed for fitment and customization purposes only. Always verify compatibility with your vehicle's specific model year and configuration before purchase.

Victorious · Discovery 4 / Sport · Trim & Handles 8-Piece Door Handle Trim Set for Land Rover Discovery 4 & Range Rover Sport Premium ABS trim covers that refresh your interior door handles with a choice of four finishes. L319 / L320 2010–2016 ABS Construction 4 Finish Options 8-Piece Set ISO9001 Certified Overview Your Discovery 4 or Range Rover Sport's door handles see constant use—and over time, they show it. This eight-piece trim set modernises the interior handles with premium ABS covers available in matte silver, chrome silver, black, or gold finishes. It's a straightforward interior refresh that elevates the cabin without requiring major modification. Engineered from durable ABS plastic and certified to ISO9001 standards, these trim covers fit directly over existing handles on Discovery 4 (2010–2016), Range Rover Sport (2008–2013), and Freelander 2 (2011–2015) models. Each set covers all four doors plus additional trim points, giving your cabin a cohesive, finished appearance. Whether you're addressing cosmetic wear or simply want a sharper interior aesthetic, this trim set delivers an accessible upgrade that works with your vehicle's existing hardware. What's Included 🎯 8 Trim Covers Four doors, plus interior points ✨ Four Finish Options Matte silver, chrome, black, gold ⚙️ ABS Material Lightweight, impact-resistant polymer ✓ Certified Fit Direct application to OEM handles Product Highlights Covers all four interior door handle positions Available in matte silver, chrome silver, black, and gold ISO9001 certified manufacturing process Lightweight ABS construction minimises unsprung weight Protective design prevents handle wear and scratches No drilling or modification required Easy installation with fastener-free application Consistent finish across all eight pieces Direct fit for three Land Rover platforms 100-gram weight per set Compatibility Vehicle Model Year Range Fitment Land Rover Discovery 4 2010–2016 Direct Fit Range Rover Sport 2008–2013 Direct Fit Land Rover Freelander 2 2011–2015 Direct Fit Discovery 3 & Earlier Pre-2010 Not Compatible Range Rover Sport L494 2013+ Not Compatible Installation Difficulty: Beginner · Time: 15–20 minutes Open each door and clean the handle area with a soft cloth to remove dust and oils. Position the trim cover over the existing handle and align it with the mounting points. Press the cover firmly until it seats fully against the handle housing. Check all four doors and any additional trim points for even fit and finish. Allow 24 hours before heavy use to ensure adhesive (if applicable) has fully cured. Note: If trim covers use adhesive backing, ensure handles are completely dry before application. Some covers may require small fasteners—check your specific finish option for installation method. Ready to Refresh Your Interior? This eight-piece door handle trim set is an effortless way to elevate your Discovery 4 or Range Rover Sport's cabin finish. Choose your colour, install in minutes, and enjoy a sharper, more cohesive interior. Shop Discovery 4 Trim Shop Range Rover Sport Trim Use code 22GET20 for 20% off any two accessories. 4.9/5 – 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide DHL, FedEx, UPS, TNT Shipping UK +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket accessory designed for compatibility with the specified vehicles.

Vehicle Interior · Tesla Model 3 · Safety & Decoration 8-Piece Door Exit Sticker Decal Set for Tesla Model 3 Professional-grade vinyl decals that clarify door exit points and enhance interior safety in seconds. Tesla Model 3 Oracal Vinyl Weather-Resistant Interior Decoration Easy Install Overview Tesla Model 3 owners demand clarity and precision in every detail—from performance metrics to cabin aesthetics. These eight-piece door exit decals address a practical concern: passengers sometimes fumble with door handles or misidentify exit points, especially in low light. Our solution combines safety with style, delivering professional-grade vinyl decals that mark exit buttons clearly while adding a polished finish to your interior. Built from durable Oracal vinyl, each decal resists weather extremes and daily wear. Installation takes under five minutes with no tools required, and removal leaves zero residue. You receive two complete matched sets—four driver-side and four passenger-side decals—with transfer tape and step-by-step instructions included. Whether you're protecting first-time passengers or simply elevating your cabin's attention to detail, these decals are an essential addition to any Model 3 owner's accessory lineup. What's Included 📋 4× Driver Side Decals Exit point markers for driver doors 📋 4× Passenger Side Decals Exit point markers for passenger doors 🎯 Transfer Tape Aids precise, bubble-free application 📖 Installation Guide Clear visual step-by-step instructions Product Highlights Premium Oracal vinyl construction—engineered for durability Weather-resistant and UV-stable—no fading or peeling Minimizes accidental or confused door openings Clearly marks exit button location for all passengers Sub-5-minute installation—no tools, no mess Residue-free removal—no damage to interior trim Professional finish—elevates cabin aesthetics Includes complete matched set for entire vehicle Transfer tape supplied for flawless application Brand new and factory-sealed Compatibility Model Year Range Compatibility Tesla Model 3 2017–2024 Direct Fit Tesla Model 3 Performance 2017–2024 Direct Fit Tesla Model Y 2020–2024 Not Compatible Tesla Model S 2016–2024 Not Compatible Installation Notes Difficulty Level: Beginner | Time: 5 Minutes Clean the door panel surfaces with a dry, lint-free cloth. Allow to dry completely. Cut decals to size if needed using the supplied template as a guide. Apply transfer tape over the front of each decal to hold it together during application. Peel the backing from the decal and carefully position on the door exit button area. Smooth firmly from center outward to remove air bubbles using a squeegee or credit card edge. Gently peel away the transfer tape at a low angle, leaving the vinyl in place. Allow adhesive to cure for 24 hours before heavy contact. Note: Clean surface ensures maximum adhesion. If removal is needed, heat lightly with a hair dryer and peel slowly to avoid any potential paint damage. Test on an inconspicuous area first if concerned. Upgrade Your Model 3 Interior Today Simple, professional, practical. These door exit decals deliver safety and style in one seamless package. Order now and protect your passengers while elevating your cabin's attention to detail. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ Reviews ✓ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc., Elon Musk, or any Tesla subsidiaries. Tesla is a registered trademark of Tesla, Inc. Product names, logos, and brands mentioned herein are the property of their respective trademark holders and are used for identification purposes only. All product descriptions and claims are made independently by Victorious Automotive.

Victorious Automotive · Range Rover Velar · Exterior Trim Dynamic Door Decoration Strips for Range Rover Velar (2017–2020) — 8-Piece Set Instantly elevate your Velar's exterior with precision-fit ABS decoration strips that deliver a Dynamic Pack aesthetic — without the dealership price tag. Range Rover Velar 2017–2020 High-Gloss ABS 8-Piece Set Peel & Stick Rose Gold / Silver / Black ISO9001 Tested No Drilling Required Overview The Range Rover Velar is one of the most design-forward vehicles in the Land Rover lineup — a vehicle that rewards attention to detail. From the flush door handles to the clean body lines, every element is considered. These Dynamic Decoration Strips are engineered to complement that philosophy, adding a layer of visual definition to the side door panels that feels entirely factory. Crafted from high-quality ABS plastic, these strips are available in three finishes — Piano Black, Rose Gold, and Silver — allowing you to tailor the trim to your Velar's colour scheme or simply add contrast to an all-black exterior. The finish quality is tight, consistent, and holds up to daily exposure without fading or peeling. Installation requires no drilling, no specialist tools, and no professional fitting. The strips are pre-backed with high-bond adhesive tape and conform precisely to the Velar's door profile. Whether you're updating a standard-spec Velar or adding a finishing touch to an already-specced car, this is one of the most impactful changes you can make to the exterior for under £50. What's Included 🚪 Door Decoration Strips × 8 Full set covering all four door panels 🔲 Pre-Applied Adhesive Tape High-bond 3M-style backing on each strip 📋 Installation Guide Step-by-step fitting instructions included 🎨 Choice of 3 Finishes Piano Black, Rose Gold, or Silver Product Highlights Direct-fit design for Range Rover Velar 2017–2020 High-gloss ABS construction — rigid, scratch-resistant surface Available in Piano Black, Rose Gold, and Silver finishes Full 8-piece set covers all four doors Pre-applied high-bond adhesive — no tools or drilling needed ISO9001 quality tested for material and adhesion performance Dynamic Pack aesthetic at a fraction of the cost Weather-resistant — UV stable and moisture-tolerant Residue-free removal when adhesive is gently heated Clean, factory-matched profile lines for a seamless fit Compatibility Vehicle Year Range Fit Range Rover Velar (All Variants) 2017 – 2020 Direct Fit Range Rover Velar (2021+) 2021 – Present Verify Before Purchase Range Rover Vogue L405 2013 – 2020 Not Compatible Range Rover Sport L494 2013 – 2020 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None (hairdryer optional) Lay all 8 strips alongside your vehicle's door panels to confirm the correct position and orientation for each piece before committing to installation. Thoroughly clean each installation area with an isopropyl alcohol wipe or equivalent degreaser. Ensure the surface is completely dry and free of wax, dust, or polish residue. Peel back the adhesive protective film on the rear of each strip. For best adhesion, gently warm the tape using a hairdryer on a low setting — this activates the adhesive and significantly improves bond strength. Carefully align the strip to the marked position on the door panel, pressing firmly from the centre outward to avoid air pockets. Apply sustained pressure for 20–30 seconds per strip. Allow the adhesive to cure at room temperature for a minimum of 2–4 hours before exposing the vehicle to water or extreme temperatures. Important: Do not install in temperatures below 10°C / 50°F. Cold conditions significantly reduce adhesive performance. For best long-term results, install indoors or in a heated garage. Complete Your Velar Browse our full Range Rover Velar accessories collection — from interior trim upgrades to exterior styling kits — all selected and tested by genuine Land Rover enthusiasts. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim ABS Air Conditioning Panel Cover Trim for Land Rover Discovery 5 L462 (2017–2023) A precision-fit centre console AC panel trim that instantly elevates the interior ambiance of your Discovery 5 — available in five premium finishes to match your cabin aesthetic. Discovery 5 L462 2017–2023 ABS Plastic Interior Trim No-Drill Install 5 Finish Options Adhesive Fit Direct Replacement Overview The Land Rover Discovery 5 L462 is one of the most capable and thoughtfully designed SUVs ever produced — a vehicle that balances serious off-road ability with a genuinely refined cabin experience. For owners who live with their Discovery every day, the interior details matter. The centre air conditioning panel is one of the most visible elements of the dashboard, and over time the standard finish can look tired, generic, or simply no longer in keeping with the rest of your specification. This ABS Air Conditioning Panel Cover Trim is custom-engineered to overlay the existing centre AC panel on the Discovery 5 L462, providing a clean, upmarket appearance upgrade without any permanent modifications. Offered in five distinct finishes — Rose Wood Grain, Silver, Oak Wood Grain, Carbon Fiber, and Black — there's an option to complement every interior colour and trim level, from base SE through to HSE and Landmark Edition variants. Manufactured from high-quality ABS plastic, the trim is lightweight yet robust, resistant to heat, UV degradation, and the general wear of daily use. The pre-applied double-sided adhesive backing ensures a confident, rattle-free bond that looks factory-fitted from the moment it's placed. It's the kind of detail that takes minutes to install but makes a lasting impression every time you sit behind the wheel. What's Included 🪟 AC Panel Cover Trim ×1 Pre-cut ABS overlay, finish as selected at checkout 🔲 Double-Sided Adhesive Pre-applied to rear of trim for immediate fitment 📄 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-cut for a seamless OEM-style fit on L462 Discovery 5 High-quality ABS plastic construction — durable and heat-resistant Available in 5 finishes: Rose Wood, Oak Wood, Carbon Fiber, Silver, Black Pre-applied adhesive backing for a clean, tool-free installation No drilling, cutting, or permanent modification required Resistant to UV fading and discolouration over time Rattle-free bond when correctly applied to a clean surface Covers existing panel for a fresh, upmarket appearance Compatible with all trim levels of the 2017–2023 Discovery 5 Lightweight design adds negligible weight to the dashboard area Compatibility Vehicle Code Years Trim Level Fitment Land Rover Discovery 5 L462 2017–2023 SE, HSE, HSE Luxury, Landmark Direct Fit Land Rover Discovery 4 L319 2009–2016 All Not Compatible Land Rover Discovery 3 L319 2004–2009 All Not Compatible Land Rover Discovery Sport L550 2015–2023 All Not Compatible Range Rover Sport L494 2013–2022 All Not Compatible Installation Notes ⚙️ Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Ensure the vehicle interior is at a comfortable ambient temperature — adhesive bonds most effectively between 18°C and 25°C. Thoroughly clean the existing AC panel surface using an isopropyl alcohol wipe or similar residue-free cleaner. Allow to dry completely before proceeding. Dry-fit the trim piece over the panel to confirm alignment and check all edges sit flush against the surrounding dashboard. Peel the protective backing from the pre-applied double-sided adhesive on the rear of the trim piece. Carefully position the trim over the AC panel, aligning from one edge and pressing down firmly across the entire surface to activate the adhesive bond. Apply firm pressure for 30–60 seconds across all areas, paying particular attention to the corners and edges. Allow a minimum of 2 hours before operating the air conditioning at high fan speeds to allow the adhesive to fully cure. ⚠ Important: Do not install on a cold or damp surface. Skipping the cleaning step is the most common cause of adhesive failure. If the trim is removed and re-applied, the adhesive may need to be replaced. Contact us if you need additional adhesive strips. Upgrade Your Discovery 5 Interior Today Browse our full range of Discovery 5 L462 interior accessories — from dashboard trim to door handle covers — and build the cabin you've always wanted. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Please verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 3 · Interior Trim ABS Black Console Gear Panel Frame Cover — Land Rover Discovery 3 LR3 (2004–2009) A precision-fitted ABS gear panel surround that refreshes the centre console of your Discovery 3 with a clean, purposeful finish — no cutting, no drilling, no compromise. Discovery 3 · LR3 2004–2009 ABS Plastic Gloss Black Direct Fit No Drilling Adhesive Install Interior Trim Overview The Land Rover Discovery 3 — sold as the LR3 in North America — is one of Land Rover's most celebrated platforms. Launched in 2004, it introduced the Integrated Body Frame architecture, a level of off-road sophistication that set it apart from its predecessors. Over time, however, the centre console plastics can show their age: scuffs, fading, and general wear that don't reflect the quality of the vehicle underneath. This ABS Console Gear Panel Frame Cover is designed as a direct overlay for the gear selector surround on all Discovery 3 and LR3 variants built between 2004 and 2009. The cover fits flush over the existing trim, replicating the factory panel geometry precisely — which means no modifications, no permanent changes, and a finish that looks entirely factory-fitted once installed. Constructed from high-quality ABS thermoplastic, the cover offers meaningful impact resistance and UV stability — qualities that matter in a cabin environment exposed to temperature cycling and sunlight. Whether you're refreshing a tired interior or simply want a cleaner, more uniform look around the gear selector, this is one of the most effective single-piece interior upgrades available for the Discovery 3. What's Included 🖤 Gear Panel Frame Cover 1 × ABS black surround, pre-cut to fit LR3 console 🔧 Automotive Adhesive Tape Pre-applied 3M-style bonding strip for secure fitment 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-moulded ABS plastic for exact panel geometry match Gloss black finish integrates cleanly with OEM interior plastics No drilling, no cutting — completely reversible installation Pre-applied automotive-grade adhesive for a lasting bond UV-stable material resists fading and discolouration over time Impact-resistant construction handles daily cabin flex and vibration Covers surface scratches, fading, and worn gear surround plastics Lightweight design adds no perceptible mass to the console Available in black, silver, and black wood grain finish variants Fits all Discovery 3 / LR3 build variants across the 2004–2009 model range Compatibility Vehicle Code Years Fitment Land Rover Discovery 3 L319 2004–2009 Direct Fit Land Rover LR3 (North America) L319 2004–2009 Direct Fit Land Rover Discovery 4 / LR4 L319 2009–2016 Not Compatible Land Rover Discovery 5 L462 2017–present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L322 L322 2002–2012 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Park the vehicle and allow the interior to reach ambient temperature — avoid fitting in cold conditions below 10°C as adhesive performance may be reduced. Thoroughly clean the existing gear panel surround using an isopropyl alcohol wipe or panel prep solution. Remove all dust, grease, and residue. Allow to dry completely — at least 5 minutes. Dry-fit the cover before committing to the adhesive. Offer it up to the panel and confirm all edges align correctly with the surrounding console geometry. Peel the backing from the pre-applied adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface. Align the cover carefully from one end, pressing it down progressively to avoid trapping air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before subjecting the area to significant heat or direct sunlight where possible. ⚠ Note: Do not attempt installation on a dirty, damp, or cold surface. Adhesion failure caused by improper surface preparation is not covered under the returns policy. If the panel surface has existing damage or is significantly contoured, test adhesion in a small area first. Upgrade Your Discovery 3 Interior Browse the full range of Land Rover Discovery 3 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide with a 4.9/5 star rating. Shop Discovery 3 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Land Rover® and Discovery® are registered trademarks of Jaguar Land Rover Limited.

Victorious Automotive · Range Rover Evoque L551 · Exterior Styling ABS Black Front Fog Lamp Frame Trim – Range Rover Evoque L551 (2019–2020) A precision-formed ABS fog light surround trim that adds a purposeful, blacked-out finish to the front fascia of the 2019–2020 Range Rover Evoque L551 — no drilling, no fuss. Evoque L551 2019–2020 ABS Plastic Gloss Black Fog Lamp Trim Exterior Styling Adhesive Fit ISO9001 Certified 200g No Drilling Required Overview The Range Rover Evoque L551 — introduced in 2019 — represents Land Rover's most refined interpretation of the compact luxury SUV. Its sculpted front end, with its bold lower fascia and integrated fog lamp housings, is one of the most distinctive design features on the vehicle. Keeping that detailing looking sharp and intentional matters to owners who take pride in every visual aspect of their Evoque. This front fog lamp frame trim is precision-manufactured from high-grade ABS plastic in a deep gloss black finish. Engineered specifically for the 2019–2020 Evoque L551 platform, each piece is contoured to follow the exact profile of the factory fog lamp recess — ensuring a flush, factory-quality appearance that looks like it was always part of the vehicle's design language. Where the standard fog lamp surrounds can appear understated or, over time, show the effects of road grime and UV exposure, this ABS trim overlay introduces a clean, dark contrast that complements both the Evoque's body colour and its wider design intent. The result is a subtly sportier, more defined front end — without modification, body shop visits, or permanent changes to the vehicle. What's Included 🔲 Fog Lamp Frame Trim Set ABS gloss black surround pieces, pre-cut to fit 🔧 Automotive Adhesive Tape Pre-applied 3M-style backing tape for secure fitment 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-moulded specifically for the Evoque L551 (2019–2020) front fog lamp recess High-grade ABS plastic construction — durable, lightweight, and UV-resistant Gloss black finish adds a bold, blacked-out contrast to the front fascia Adhesive-backed installation — no drilling, cutting, or permanent modification ISO9001-certified production quality for consistent fit and finish Weighs just 200g — no impact on vehicle aerodynamics or performance 31cm × 15cm × 5cm — engineered to match OEM fog lamp housing dimensions Resistant to road wash, car cleaning products, and everyday weathering Fully reversible — remove cleanly without damage to original paintwork Enhances the Evoque's front-end presence with a more defined, sporty character Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the fog lamp surround area on your Evoque's front bumper using isopropyl alcohol or a panel wipe — remove all dirt, wax, and grease residue for maximum adhesion. Allow the surface to dry completely. In cold weather, gently warm the bumper surface and the adhesive backing with a heat gun or hairdryer to improve bond strength. Dry-fit each trim piece without removing the adhesive backing to confirm alignment and positioning before committing to placement. Peel back the adhesive tape backing and carefully align the trim piece from one edge, pressing firmly along the full length to avoid air pockets or misalignment. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before washing the vehicle. ⚠ Note: Do not install in temperatures below 5°C (41°F) as this may significantly reduce adhesive performance. Ensure the bumper surface is completely dry and free of silicone-based products prior to fitting. This trim is designed for the 2019–2020 Evoque L551 only — do not attempt to fit to earlier L538 models as the fog lamp housing dimensions differ. Complete Your Evoque's Look Explore the full range of exterior styling accessories for the Range Rover Evoque L551 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Storage ABS Black Central Storage Box Door for Land Rover Discovery 4 LR4 (2010–2016) – Phone & Glove Armrest Box A precision-fit central armrest storage box door that restores function, adds organisation, and keeps the Discovery 4's cabin looking sharp — no tools, no compromise. Discovery 4 / LR4 2010–2016 ABS Plastic Gloss Black Direct Fit Phone Storage Armrest Box Tool-Free Install Interior Upgrade Overview The Land Rover Discovery 4 — sold as the LR4 in North American markets — is a machine built around usability. Whether tackling green lanes on a Sunday or managing the school run through rush hour, the D4's cabin is your command centre. Over time, the central storage box door takes its share of wear: scratches, fading, or simply the fatigue that comes from years of daily use. This replacement piece is the clean, cost-effective solution. Manufactured from high-grade ABS thermoplastic, this central storage box door is purpose-designed for the Discovery 4 LR4 produced between 2010 and 2016. It slots neatly into the armrest centre console area, providing a secure lid over the internal storage cavity — ideal for keeping a phone, wallet, sunglasses, or other everyday essentials contained and protected. The sleek gloss black finish integrates cleanly with the D4's existing interior trim palette. Unlike universal aftermarket alternatives, this part is engineered to the correct geometry of the LR4 centre console, meaning fitment is precise and the closing action is smooth. If you take pride in a well-maintained interior — and Discovery 4 owners typically do — this is exactly the level of detail that makes the difference. What's Included 📦 Central Storage Box Door 1x ABS black replacement lid — ready to fit 🔧 Fitment Clips (if applicable) Retention clips pre-attached or included where required 📋 Installation Guide Basic fitment reference included in packaging Product Highlights Precision-engineered for Discovery 4 LR4 (2010–2016) — no modification needed Constructed from impact-resistant, high-grade ABS thermoplastic Gloss black finish designed to complement factory D4 interior trim Smooth open-and-close action matching OE feel and fitment tolerances Provides secure storage for phones, wallets, cards, and small accessories Replaces worn, cracked, or discoloured original central armrest lids Tool-free installation — clips or slides directly into existing aperture Lightweight construction — adds zero meaningful weight to the vehicle UV-stable ABS formulation resists fading in direct sunlight over time Cost-effective interior restoration without dealer pricing or lead times Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 4 / LR4 L319 2009 (pre-facelift) Verify Before Purchase Land Rover Discovery 3 / LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None With the vehicle parked and ignition off, fully open the existing central armrest storage compartment to expose the door hinge or clip points. Carefully flex or unclip the original storage box door from its mounting points — apply gentle, even pressure to avoid stressing the surrounding trim. If the original door uses retention clips, check whether these are reusable or whether new clips are included with your replacement unit. Align the new ABS storage box door with the hinge slots or clip points on the centre console aperture — ensure even seating on both sides before pressing home. Apply firm, even pressure until the unit clicks securely into position. Test the open and close action several times to confirm smooth, rattle-free operation. Inspect the fitment gap around the perimeter of the lid — it should sit flush and consistent with the surrounding console trim on all sides. ⚠ Note: If your Discovery 4's centre console has been previously modified, repaired, or fitted with non-standard trim, clip alignment may vary. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before fitting. Complete Your Discovery 4 Interior Explore the full range of Land Rover Discovery 4 accessories at Victorious Automotive — curated specifically for LR4 owners who won't settle for anything less than a factory-quality finish. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 / Discovery 5 / Range Rover Vogue · Interior Trim ABS Black Cup Holder Trim – Land Rover Discovery 4, Discovery 5, Range Rover Vogue L405 & LR4 / LR5 Water Drinks Holder Surround A precision-moulded ABS replacement trim that restores a clean, factory-fresh finish to your centre console cup holder — designed specifically for Land Rover and Range Rover interiors. Discovery 4 (2010–2016) Discovery 5 (2017–2023) Range Rover Vogue L405 (2013–2020) Range Rover Sport L494 (2013–2020) ABS Plastic Gloss Black Direct Fit No Drilling Required Interior Trim Cup Holder Surround Overview The Land Rover Discovery 4 and Discovery 5 are known for their commanding presence and thoughtfully engineered interiors — but over time, the original cup holder trim surrounding the centre console drinks holder can become scuffed, scratched, or simply tired-looking. The same applies to Range Rover Vogue L405 and Range Rover Sport L494 models, where high-contact areas like the cup holder surround see daily wear from mugs, bottles, and road trip companions. This ABS black cup holder trim has been designed as a direct-fit replacement or upgrade for these specific Land Rover and Range Rover platforms. Moulded from high-grade ABS plastic, it replicates the precise contours of the factory surround while delivering a consistently clean, gloss-black finish that sits flush with the existing console architecture. Whether you're refreshing a tired interior or simply prefer a darker, more uniform aesthetic throughout the cabin, this trim delivers an immediate visual uplift. Unlike generic universal trims, this piece is shaped to match the exact profile of the Discovery 4 (LR4), Discovery 5 (LR5), and Range Rover Vogue / Sport centre console — ensuring there are no gaps, misalignments, or proud edges once installed. The result is a finish that reads as factory-fitted rather than aftermarket. What's Included 🖤 Cup Holder Trim Piece(s) Available as 1-piece or 2-piece set — select your preferred option above 📋 Fitting Guide Basic installation reference included in packaging 🔒 Secure Packaging Protective wrap to prevent transit damage to gloss finish ✅ 30-Day Guarantee Covered by Victorious Automotive's money-back assurance Product Highlights High-grade ABS plastic construction — resistant to heat, UV fading, and everyday knocks Gloss black finish integrates seamlessly with existing black interior trim and piano black detailing Direct-fit design engineered for Discovery 4, Discovery 5, Range Rover Vogue, and Sport platforms No drilling, cutting, or permanent modification required for installation Snap-fit or adhesive-backed fitment — tool-free for most variants Available in both 1-piece and 2-piece configurations to suit your console layout Precision-moulded edges ensure zero visible gaps or misalignment once fitted Lightweight addition — no impact on console mechanics or cup holder function Easy to clean and maintain — wipe-clean surface resists staining from drinks and daily use Refreshes and elevates the centre console area without a costly interior refurbishment Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 5 LR5 / L462 2017–2023 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 (2020+) 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Unsure whether this trim suits your exact build date or specification? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None (in most cases) Ensure your centre console and existing cup holder surround area are clean and free from dust, oils, or residue. A dry microfibre cloth works well for this step. If removing the original trim, gently work around the edges using a plastic trim removal tool to unclip any retaining tabs without marking the surrounding console surfaces. Dry-fit the new ABS trim piece first — align it with the cup holder aperture and press gently to confirm all edges seat flush before final installation. For snap-fit variants, apply firm, even pressure around the perimeter until you feel or hear the retaining clips engage. For adhesive-backed versions, remove the backing film and press firmly for 30 seconds. Step back and inspect all four edges for uniformity. The trim should sit completely flush with no lifting corners or visible gaps. ⚠ Important: Always confirm your exact model year and console configuration before fitting. Console layouts can vary slightly between early and late production runs within the same generation. If in doubt, contact us before beginning installation. Shop By Vehicle Looking for more interior upgrades for your Land Rover or Range Rover? Browse our full curated collections below: 🚙 Discovery 4 Accessories LR4 · 2010–2016 🚙 Discovery 5 Accessories LR5 · 2017–2023 🏆 Range Rover Vogue L405 2013–2020 🏆 Range Rover Sport L494 2013–2020 Interior Details That Set Your Land Rover Apart At Victorious Automotive, we stock only parts we'd fit to our own vehicles. Every trim, accessory, and upgrade in our range is selected for quality, fitment precision, and longevity — because your Land Rover deserves nothing less. Shop Discovery 4 Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, authorised by, or in any way connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Exterior Trim ABS Black Rear Light Frame for Land Rover Defender 110 L663 (2020–2026) A precision-formed ABS rear light surround that integrates cleanly with the Defender 110's angular exterior, adding a purposeful blacked-out finish to the tail-light cluster without modification. Defender L663 2020–2026 ABS Plastic Gloss Black Rear Light Surround No Drilling Required Adhesive Fit Model: LLK2781 ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that commands attention on any terrain — its upright silhouette, exposed bolt detail, and utilitarian design language are instantly recognisable. For owners who want to sharpen that aesthetic without compromising the Defender's honest character, selective exterior trim upgrades offer the most considered approach. The rear light area, in particular, is a focal point of the Defender's tail-end — and the right surround can transform how the entire rear reads from a distance. This ABS Rear Light Frame has been purpose-built to the exact dimensional profile of the Defender 110 L663 rear light cluster. Manufactured from high-grade ABS thermoplastic and finished in a uniform gloss black, it wraps the perimeter of each light unit with clean, defined lines that complement the Defender's geometric styling. The result is a cohesive, blacked-out rear end that feels intentional rather than aftermarket. Engineered to ISO9001 quality standards, this frame delivers consistent fitment and finish quality you can rely on. The pre-applied automotive-grade adhesive tape on the reverse face means installation is straightforward and residue-free if removal is ever needed. No drilling, no cutting, no specialist tools — just a clean upgrade that looks like it was always there. What's Included 🔲 Rear Light Frame ABS gloss black surround, pre-taped rear 🔧 Adhesive Mounting Tape Automotive-grade, pre-applied to frame 📄 Fitment Guide Step-by-step installation reference Product Highlights Custom-profiled for the Defender 110 L663 rear light cluster — precise panel gap alignment High-grade ABS thermoplastic construction — impact-resistant and UV-stable Uniform gloss black finish — consistent sheen across the full frame profile Pre-applied automotive adhesive tape — no drilling or body modification required ISO9001 certified manufacturing — consistent quality across every unit produced Lightweight design at 1,025g — no perceptible added mass to the vehicle 65cm span covers the full width of the light unit perimeter cleanly Complements Defender black pack and dark exterior trim configurations Tool-free installation — achievable in under 30 minutes by a single person Reversible fitment — adhesive tape allows clean removal without paint damage Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Product Specifications Specification Detail Model Number LLK2781 Material ABS Thermoplastic Colour Gloss Black Item Length 65 cm Item Width 25 cm Item Height 10 cm Item Weight 1,025 g Certification ISO9001 Mounting Method Pre-applied automotive adhesive tape Installation Notes ⏱ Estimated Time: 20–30 minutes  ·  🔧 Difficulty: Beginner Thoroughly clean the rear light surround area on your Defender 110 using an IPA (isopropyl alcohol) wipe. Remove any wax, polish, or silicone residue. Allow to dry completely before proceeding. Dry-fit the rear light frame against the vehicle without removing the adhesive backing. Confirm the profile aligns cleanly with the light unit perimeter and all panel gaps sit evenly. Mark your positioning reference points lightly with a removable marker or masking tape if needed — particularly at the outer corners. Peel the protective backing from the pre-applied adhesive tape. Avoid touching the adhesive surface with bare fingers. Starting from the centre, press the frame firmly into position, working outward toward each end. Apply firm, even pressure across the full surface for at least 60 seconds. Allow a minimum of 24 hours cure time before exposing the vehicle to rain or a car wash. The adhesive bond will reach full strength within 48–72 hours. ⚠ Important: Do not attempt installation on a cold or damp surface. Ambient temperature should be above 10°C for the adhesive to bond correctly. If your vehicle has recently been resprayed, wait at least 30 days before applying any adhesive-backed trim to ensure paint has fully cured. Complete Your Defender's Exterior This rear light frame pairs perfectly with our full range of Defender 110 L663 exterior trim upgrades — from mirror caps and door handle surrounds to bonnet vents and side vents. Build a cohesive look across every panel. Shop Defender 110 (2020) Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and designations referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 · Interior Styling ABS Black Rear Reading Light Frame Sticker — Land Rover Discovery 4 LR4 (2010–2016) A precision-cut ABS black trim frame that refreshes the rear reading light surround on your Discovery 4 LR4, delivering a clean, factory-consistent aesthetic with zero permanent modification. Discovery 4 / LR4 2010–2016 ABS Plastic Gloss Black Rear Reading Light Adhesive Fit Interior Trim No Drilling Overview The Land Rover Discovery 4 — sold as the LR4 in North American markets — remains one of the most capable and characterful Land Rovers ever built. Owners who live with these vehicles day to day know how rewarding the right interior upgrade can be, particularly when it brings a cohesion to cabin details that the factory may have left understated. The rear reading light surround is one of those areas: functional, frequently visible to rear passengers, and ripe for a thoughtful refresh. This rear reading light frame sticker is formed from high-grade ABS plastic and finished in a deep, consistent gloss black. It sits precisely over the existing light surround, updating the look of the headliner-mounted unit without any cutting, drilling, or permanent alteration to the original trim. The result is a visually tidier rear overhead area that feels considered rather than aftermarket — exactly the kind of detail Discovery 4 owners appreciate. The adhesive backing is pre-applied and strong enough to hold permanently under normal cabin conditions, including summer heat cycles. Whether you're refining a high-mileage interior or simply adding definition to an already well-kept cabin, this trim piece earns its place through subtlety and fit quality rather than spectacle. What's Included 🔲 Rear Reading Light Frame 1 × ABS black trim surround, pre-cut to fit 🔧 Pre-Applied Adhesive Double-sided tape backing — no extra tools needed 🧴 Cleaning Prep Wipe Surface prep wipe included for clean adhesion Product Highlights Precision-cut specifically for the Discovery 4 LR4 rear reading light surround High-quality ABS plastic — resistant to warping, cracking, and UV fade Gloss black finish complements both light and dark interior colour schemes Pre-applied double-sided adhesive for a clean, tool-free installation No permanent modification — completely reversible if required Lightweight construction adds no stress to the headliner or original trim Consistent colour and sheen across the full face of the frame Sits flush against the original surround with no visible gaps or lifting edges Covers minor scuffs or discolouration on the original plastic surround Compatible across all trim levels of the Discovery 4 LR4 (2010–2016) Vehicle Compatibility Vehicle Code Years Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 4 / LR4 — All Trim Levels L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  ·  🛠 Difficulty: Beginner Ensure the vehicle interior is at room temperature — avoid installation in cold conditions below 10°C, as this can reduce initial adhesive tack. Clean the existing rear reading light surround thoroughly using the included prep wipe or isopropyl alcohol on a lint-free cloth. Allow to dry completely before proceeding. Dry-fit the frame over the surround to confirm alignment and orientation. Note which edge sits toward the front of the vehicle. Peel back the protective film from the double-sided adhesive tape on the reverse of the frame, taking care not to touch the adhesive surface. Align the frame carefully from one edge and press down progressively across the face of the trim, applying firm, even pressure for 30–60 seconds. Allow the adhesive to cure for at least 2 hours before exposing the trim to significant vibration or temperature extremes. ⚠ Note: Do not attempt to reposition the frame after the adhesive has made contact with the original trim surface. If unsure of alignment, use masking tape to mark your position before final application. Ensure the original surround surface is completely dry and free of any silicone-based conditioner products, which can prevent adhesion. More Discovery 4 Interior Upgrades Browse the full range of Land Rover Discovery 4 interior styling accessories at Victorious Automotive — trusted by over 12,300 owners worldwide with a 4.9-star rating. Shop Discovery 4 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Accessories ABS Black Rear Trunk Tail Storage Box for Land Rover Discovery 5 L462 (2017–2022) A precision-fitted rear trunk storage solution that brings order to the Discovery 5's load area — purpose-built for L462 owners who expect the same attention to detail inside as out. Discovery 5 L462 2017–2022 ABS Plastic Trunk Storage Interior Organiser Gloss Black No-Drill Fit Lightweight Overview The Land Rover Discovery 5 L462 is built for versatility — a vehicle equally at home on the school run and a weekend trail. But the generous boot space that makes it so capable can quickly become a disorganised jumble of gear, bags, and loose items. If you've ever opened the tailgate after a busy week and had something roll out at your feet, you'll understand exactly why a structured storage solution matters. This rear trunk tail storage box is designed specifically for the Discovery 5 L462 (2017–2022) and integrates cleanly into the existing boot architecture. Manufactured from high-quality ABS plastic in a clean matte black finish, the unit is both rigid enough to withstand daily use and light enough not to compromise your payload. It creates defined storage compartments in the tail of the boot, keeping smaller items contained, accessible, and protected from sliding around during cornering or off-road movement. Unlike generic boot organisers, this is a vehicle-specific fit — engineered to the L462's dimensions so it sits flush and stable without adhesive or drilling. It's the kind of understated upgrade that Discovery 5 owners immediately wonder how they lived without. What's Included 📦 Rear Trunk Storage Box 1 × ABS black unit, Discovery 5 L462 specific 🔧 Fitting Hardware All necessary clips and fixings included 📋 Installation Guide Step-by-step fitting reference Product Highlights Precision-engineered specifically for the Discovery 5 L462 platform High-quality ABS plastic — impact-resistant and long-lasting Gloss black finish complements the Discovery 5's interior trim Lightweight construction — no meaningful impact on payload Defined compartments prevent items shifting during travel No drilling or permanent modification required for fitting Stable, secure fit that doesn't rattle or shift in use Easy to remove and refit — fully reversible installation Brand new, 100% quality-checked before despatch Compatible with all trim levels of the L462 Discovery 5 Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 S L462 2017–2022 Direct Fit Land Rover Discovery 5 SE L462 2017–2022 Direct Fit Land Rover Discovery 5 HSE L462 2017–2022 Direct Fit Land Rover Discovery 5 HSE Luxury L462 2017–2022 Direct Fit Land Rover Discovery 5 First Edition L462 2017–2022 Direct Fit Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–20 Minutes  ·  Tools Required: None Open the tailgate of your Discovery 5 L462 and clear the boot area of any loose items. Unpack the storage box and familiarise yourself with the unit and any included clips or fixings. Position the storage box in the rear tail section of the boot, aligning it with the existing anchor points or trim channels. Press the unit firmly into position, engaging any retaining clips until you hear or feel them seat securely. Test the unit by applying gentle lateral pressure — it should remain stable without any movement or flex. Close the tailgate and verify the box does not interfere with the sealing or closing mechanism. Please Note: Verify your exact Discovery 5 trim level and model year before purchasing. If you are unsure of compatibility, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment for you before you order. More for Your Discovery 5 Browse our full range of Land Rover Discovery 5 L462 interior and exterior accessories — all curated for owners who refuse to compromise on quality or detail. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 3 & 4 · Interior Trim ABS Black Wood Grain Gear Shift Head Cover Stickers – Land Rover Discovery 3, Discovery 4, LR3, LR4 & Freelander 2 (2007–2015) Refresh your gear selector surround with a precision-fit black wood grain trim cover — a subtle, high-impact interior upgrade for Discovery and Freelander 2 owners who demand more from their cabin. Discovery 3 · LR3 Discovery 4 · LR4 Freelander 2 2007–2015 ABS Plastic Black Wood Grain Gear Shift Cover No-Drill Fit ISO9001 Certified Overview The Land Rover Discovery 3, Discovery 4, and Freelander 2 are renowned for their capability and commanding interior presence — but years of daily use can leave the gear selector area looking tired, scratched, or simply dated. It's one of the highest-touch points in any cabin, and one of the first areas owners notice when the interior starts to show its age. These ABS black wood grain gear shift head cover stickers are engineered to fit the selector surround precisely across the 2007–2015 Discovery 3, Discovery 4 (LR3/LR4), and Freelander 2 model range. Constructed from rigid, high-grade ABS plastic with a rich black wood grain surface texture, they deliver a refined, premium aesthetic that elevates the overall feel of the centre console without requiring any modification to the vehicle. Installation is entirely tool-free — each piece arrives pre-fitted with strong double-sided adhesive backing that bonds cleanly to the factory surface. The result is a seamless, factory-finish appearance that looks deliberate and considered rather than aftermarket. Sourced from an ISO9001-certified manufacturing facility, these trims meet the quality expectations of enthusiast Land Rover owners worldwide. What's Included 🎛️ Gear Shift Head Cover Stickers 2 pieces — ABS black wood grain finish, pre-cut to fit 🔧 Pre-Applied Adhesive Double-sided tape pre-installed on each piece for immediate fitment 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Precision-cut ABS construction for accurate panel alignment on Discovery and Freelander 2 gear surrounds Rich black wood grain texture adds a premium, luxury feel to the centre console area Rigid ABS material resists warping, heat distortion, and UV fading over time Tool-free installation — no drilling, no cutting, no permanent modification required Pre-applied double-sided automotive-grade adhesive for a clean, lasting bond Covers surface scratches, scuffs, and worn areas on the factory gear selector trim Compatible across the full 2007–2015 Discovery 3, Discovery 4, LR3, LR4, and Freelander 2 range Sourced from an ISO9001-certified factory — quality-controlled production throughout Low-profile fit that does not interfere with gear selector operation or adjacent switchgear Reversible upgrade — can be removed cleanly without damage to factory trim panels Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 3 LR3 / L319 2007–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2015 Direct Fit Land Rover Freelander 2 L359 2007–2015 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–Present Not Compatible If you are unsure whether this trim fits your specific build or regional specification, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Ensure the gear selector and surrounding trim area is clean, dry, and free from grease, dust, or any existing wax or polish residue. Use an IPA (isopropyl alcohol) wipe for best adhesive performance. Dry-fit each cover piece over the gear shift head surround before committing — confirm alignment with all edges and panel gaps before removing the adhesive backing. Peel back the protective liner from the double-sided adhesive on the first piece, taking care not to touch the adhesive surface. Align the cover carefully over the gear shift head trim, starting from the top or a clearly defined reference point, then press firmly downward across the full surface. Apply sustained hand pressure for 30–60 seconds across the entire panel to ensure full adhesive contact, paying particular attention to edges and corners. Repeat the process for the second piece. Allow 12–24 hours before exposing the trim to heavy use or cleaning to allow the adhesive to fully cure. ⚠ Note: Do not attempt installation on a cold surface or in low-temperature environments — adhesive performance is significantly reduced below 15°C (59°F). If the factory trim surface has been previously treated with silicone-based interior dressings, clean thoroughly with IPA before fitting to ensure a lasting bond. Explore More Discovery & Freelander Accessories Looking to continue your interior refresh? Browse the full range of trim, storage, and protection accessories for your specific vehicle below: 🔗 Discovery 3 Accessories Full range for LR3 / L319 owners 🔗 Discovery 4 Accessories Full range for LR4 / L319 owners 🔗 Discovery 5 Accessories Interior & exterior upgrades for L462 Upgrade Your Discovery Interior Today Join over 12,300 Land Rover owners who trust Victorious Automotive for premium accessories. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT ✅ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Jaguar · E-Pace · Interior Trim ABS Interior Door Handle Trim for Jaguar E-Pace 2018–2019 Premium OEM-style interior trim upgrade that transforms your E-Pace cabin with factory-finished aesthetics and seamless compatibility. E-Pace 2018–2019 ABS Material 4-Piece Set Interior Trim Direct Fit Overview The Jaguar E-Pace represents a bold statement in compact luxury SUV design. Every detail matters—from exterior styling to the tactile experience inside. Your door handles are among the most-touched surfaces in the cabin, yet they're often overlooked as an upgrade opportunity. This 4-piece ABS interior door handle trim set delivers a straightforward way to refresh your E-Pace's cabin. Manufactured from durable ABS plastic with a premium finish, these trim pieces slip over your existing handles to provide a cohesive, upscale appearance. Whether you're aiming for a subtle enhancement or a complete interior refresh, this set integrates seamlessly with your vehicle's existing aesthetics. Perfect for owners who care about interior detail and want an affordable, non-invasive upgrade that requires no cutting or modification. What's Included 🚗 4-Piece Trim Set All four door handles (2 front + 2 rear) ✓ Direct Fit Design No modifications required 🔧 Simple Installation 5–15 minutes per door 📦 Protective Packaging Secure transit, ready to install Product Highlights Premium ABS construction for durability and refined finish OEM-style design that matches factory interior aesthetics All four doors covered (front left, front right, rear left, rear right) No drilling, cutting, or permanent modifications needed Easy slide-on installation—no special tools required Enhanced tactile quality and grip comfort Scratch and UV-resistant finish Direct fit for 2018–2019 Jaguar E-Pace models Lightweight and maintains original door mechanism function Affordable way to refresh your cabin without dealer costs Compatibility Model Year Range Compatibility Jaguar E-Pace 2018–2019 Direct Fit Jaguar E-Pace 2020+ Not Compatible Other Jaguar Models Any Year Not Compatible Verify Your Model Year: This trim is engineered for 2018–2019 E-Pace models only. Check your vehicle registration or door jamb plate to confirm compatibility before purchase. Installation Notes Difficulty Level: Beginner | Time: 20–30 Minutes Open Each Door: Begin with the driver's door. Open it fully and ensure good lighting inside the cabin. Inspect Existing Handle: Note the current handle design and grip orientation. Ensure the door mechanism is clean and dry. Slide Trim Over Handle: Gently slide the ABS trim piece over your existing handle. It should fit snugly without forcing. Verify Alignment: Check that the trim sits flush and level. Press gently around all edges to ensure full contact. Repeat for All Doors: Move to the front right, then both rear doors. Use the same process for consistency. Test Grip and Function: Open and close each door several times to confirm the handle operates smoothly and the trim doesn't shift. Final Inspection: Step back and review the overall appearance. Gaps or misalignment indicate the need for minor repositioning. Safety Tip: Do not force trim pieces onto handles. If resistance occurs, remove and inspect for debris or manufacturing variances. A slight gap is normal and will close under light pressure during normal use. Elevate Your E-Pace Interior Premium cabin details don't have to demand a premium price. This 4-piece door handle trim set gives your Jaguar E-Pace a refined, cohesive look in under 30 minutes—with zero modification and maximum confidence. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews ✓ 30-day money-back guarantee 🌍 Worldwide DHL/FedEx shipping 📞 UK support: +44 203 943 9919 This product is not affiliated with Jaguar Land Rover plc, its subsidiaries, or dealers. All vehicle names and trademarks are property of their respective manufacturers. Product compatibility is provided for reference only. Always verify fitment before purchase. Victorious Automotive assumes no liability for incorrect installations or incompatible applications.

Victorious Automotive · Defender L663 · Interior Protection ABS Carbon Fiber Anti-Kick Tailgate Protection Panel Stickers — Land Rover Defender 110 (2020–2021) Precision-fit ABS carbon fiber trunk tailgate protection panels that guard your Defender 110's rear door from scuffs and kicks while adding a sharp, purposeful finish to the interior. Defender L663 2020–2021 ABS Carbon Fiber Anti-Kick Protection Tailgate Panel No-Drill Install Interior Trim Adhesive Fit Overview The Land Rover Defender 110 L663 reintroduced a legend for a new generation — blending rugged capability with a distinctly modern, purposeful interior. Every detail inside the Defender communicates intent, which makes the tailgate area — one of the most frequently used and most exposed surfaces in the cabin — worth protecting properly. These ABS carbon fiber anti-kick protection panels are designed specifically for the 2020–2021 Defender 110 trunk tailgate. Acting as a barrier against the everyday wear caused by loading, unloading, boots, and gear, they shield the factory trim from scratches, scuffs, and impact marks that accumulate over time. The carbon fiber texture finish integrates cleanly with the Defender's interior aesthetic without looking afterthought. Installation requires no drilling, no specialist tools, and no modification to the vehicle. Each panel arrives pre-cut to follow the exact profile of the Defender 110 tailgate and is backed with automotive-grade adhesive tape for a secure, residue-free bond. If you're particular about keeping your Defender's interior in the condition it deserves, this is a simple, effective upgrade. What's Included 🛡️ Carbon Fiber Tailgate Protection Panel 1× ABS carbon fiber anti-kick cover panel, pre-cut for Defender 110 trunk tailgate 🔧 Automotive Adhesive Tape Pre-applied 3M-style tape on the reverse for immediate, tool-free installation 📄 Installation Guide Step-by-step fitment instructions for a clean, bubble-free application Product Highlights Precision cut to fit the 2020–2021 Defender 110 trunk tailgate profile exactly ABS substrate with carbon fiber texture finish — lightweight yet impact-resistant Protects factory trim from kicks, scuffs, boot contact, and loading damage Sleek carbon fiber aesthetic complements the Defender's modern interior design Tool-free installation — no drilling, no cutting, no modifications required Automotive-grade adhesive backing ensures a strong, long-lasting bond Residue-free removal if repositioning is needed during installation UV-stable finish — will not fade, yellow, or crack over time Does not interfere with tailgate operation, hinges, or locking mechanism Adds a premium, purposeful look to a frequently overlooked area of the interior Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2024 Not Compatible Land Rover Defender 110 L663 2022–2024 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  |  🛠 Difficulty: Easy — No Tools Required Open the Defender 110 tailgate fully and ensure the interior panel surface is clean, dry, and free from dust, grease, or wax residue. Use an isopropyl alcohol wipe for best results. Dry-fit the carbon fiber panel against the tailgate trim area to confirm alignment and positioning before committing to adhesive contact. Peel back a small section of the adhesive backing tape, align one edge of the panel carefully, and press firmly into position. Gradually peel the remaining backing tape whilst pressing the panel flat against the surface — work from the centre outward to avoid trapping air bubbles. Apply firm, even pressure across the entire panel surface for 30–60 seconds. Allow the adhesive to cure for at least 2 hours before loading the vehicle. ⚠ Note: Do not install in temperatures below 10°C / 50°F — cold conditions reduce adhesive bond strength. Ensure the surface is completely dry before application. Once bonded, avoid removing and re-applying the panel as this may compromise adhesive performance. Complete Your Defender 110 Interior Explore our full range of precision-fit interior trim and protection accessories for the Defender L663 — every piece designed to complement the vehicle without compromise. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Range Rover Sport L461 · Interior Trim ABS Carbon Fibre Centre Console & Dashboard Trim Strips — Range Rover Sport L461 (2023–2024) LHD Precision-cut carbon fibre-effect ABS trim strips designed to elevate the interior of your new-generation Range Rover Sport L461 — a direct-fit, no-drill upgrade that installs in minutes. Range Rover Sport L461 2023–2024 Left Hand Drive Only ABS Material Carbon Fibre Finish Centre Console Dashboard Trim No-Drill Fitment Double-Sided Adhesive ISO9001 Quality Overview The Range Rover Sport L461 represents a significant leap forward for Land Rover's most dynamic model line — sharper styling, a more driver-focused cockpit, and premium materials throughout. Owners who spend time in the cabin quickly develop an appreciation for the details, which is exactly where these trim strips make their mark. These carbon fibre-effect ABS trim strips are precisely shaped to overlay the centre console and dashboard trim panels of the L461 Sport. The carbon weave pattern brings a motorsport-inspired aesthetic to the interior without compromising the factory finish beneath — an ideal choice for owners who want a sportier look that complements the vehicle's performance character, whether fitted with Autobiography, Dynamic SE, or HSE specification. Made from high-grade ABS under ISO9001-certified manufacturing conditions, each strip is scratch and wear resistant, and finished with pre-applied 3M-grade double-sided adhesive tape for a clean, secure installation that requires no tools, no drilling, and no professional fitting. The result is a factory-quality appearance that looks and feels like it belongs. What's Included 🎛️ Centre Console Trim Strips Carbon fibre-effect ABS overlay panels for the centre console area 📐 Dashboard Trim Strips Pre-shaped dashboard accent trims matched to L461 panel geometry 🔲 Pre-Applied Adhesive Double-sided 3M-grade tape applied to rear of each strip 📦 Retail Packaging Brand new, boxed and protected for transit Product Highlights Precision-engineered for the Range Rover Sport L461 2023–2024 interior geometry High-grade ABS construction — lightweight, rigid, and long-lasting Realistic carbon fibre weave finish — adds a dynamic, sport-forward aesthetic Scratch and abrasion resistant surface treatment for daily use Pre-applied double-sided adhesive — no tools, no drilling required Clean fitment that preserves the factory panel beneath Manufactured in an ISO9001-certified facility with global export quality standards Specifically designed for Left Hand Drive (LHD) models only Covers both centre console and dashboard trim areas in one kit Direct visual upgrade — improves interior appearance immediately upon fitment Compatibility Vehicle Code Year Range Drive Fitment Range Rover Sport L461 2023–2024 Left Hand Drive (LHD) Direct Fit Range Rover Sport L461 2023–2024 Right Hand Drive (RHD) Not Compatible Range Rover Sport L494 2013–2022 All Not Compatible Range Rover Vogue L460 2022–2024 All Not Compatible Defender L663 2020–2024 All Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–40 minutes  ·  🛠 Tools Required: None Begin with a clean, dry interior. Ensure cabin temperature is above 15°C for optimal adhesive bond. Dry-fit each trim strip to its corresponding panel before removing any adhesive backing — confirm alignment and positioning matches the product images exactly. Using a microfibre cloth and a small amount of isopropyl alcohol (IPA), thoroughly clean the target panel surface to remove any dust, oils, or residue. Allow to dry fully. Peel back the protective film from the double-sided adhesive tape on the rear of the trim strip. Carefully align the strip to the panel and press firmly from the centre outward, applying sustained pressure for 30–60 seconds along the full length of each piece. Allow the adhesive to cure for a minimum of 24 hours before exposing to extreme temperatures or moisture. Cross-reference each completed piece against the product images to confirm correct positioning before moving to the next trim strip. ⚠ Important: These trim strips are designed exclusively for Left Hand Drive (LHD) Range Rover Sport L461 models. The panel geometry on RHD vehicles differs — fitting on a right-hand drive vehicle will result in incorrect alignment and is not supported. Please confirm your vehicle's drive configuration before ordering. Upgrade Your L461 Sport Interior Explore our full collection of Range Rover Sport L461 interior accessories — from trim upgrades to seat covers, pedal sets, and storage solutions — all curated specifically for the new-generation Sport. Shop Range Rover Sport L461 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced (including Range Rover, Range Rover Sport, and L461) are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L461 · Interior Trim ABS Carbon Fibre Centre Console Lower Storage Trim — Range Rover Sport L461 2023–2024 A precision-fit interior upgrade that brings bold carbon fibre styling to the lower centre console storage area of your Range Rover Sport L461 — no modification required. Range Rover Sport L461 2023–2024 ABS Carbon Fibre Centre Console Trim Interior Upgrade Direct Fit 3M Adhesive Install Scratch Resistant Overview The Range Rover Sport L461 represents a generational leap in Land Rover's sporting lineup — sharper proportions, a dramatically reimagined interior, and a cabin that demands a higher standard of detail. Owners who have invested in this generation understand that every surface tells a story, and the centre console is one of the most tactile, most frequently engaged spaces in the entire cockpit. This centre console lower storage trim is engineered specifically for the L461 Sport, sitting precisely over the lower storage compartment in ABS finished with a carbon fibre pattern. The result is a clean, purposeful aesthetic upgrade that feels cohesive with the Sport's performance character rather than retrofitted onto it. Available in Carbon Fibre, Black, and Silver finishes to complement your existing interior palette. Manufactured in an ISO9001-certified facility and exported globally, this trim meets a consistent quality standard with tight tolerances — meaning the fit is accurate, the edges are clean, and the finish holds up against the daily wear that a frequently used storage area inevitably sees. What's Included 🪄 Centre Console Lower Storage Trim ABS carbon fibre panel, qty: 1 🔲 Pre-Applied 3M Double-Sided Tape Factory-applied to reverse face of trim 📦 Retail Protective Packaging Boxed and padded for transit protection 📋 Installation Reference Fit guide with position alignment notes Product Highlights Precision-moulded ABS to match the L461 Sport's centre console geometry Carbon fibre finish adds a performance-focused visual layer to the cabin Scratch and wear resistant surface coating for long-term durability Available in Carbon Fibre, Gloss Black, and Silver finish options Pre-applied 3M double-sided adhesive for clean, tool-free installation Manufactured in an ISO9001-certified production facility No drilling, cutting or permanent modification required Elevates the tactile feel of the most frequently used console area Lightweight ABS construction adds no meaningful weight to the interior Globally exported — verified fit across multiple right and left-hand drive markets Compatibility Model Generation / Code Year Range Fit Range Rover Sport L461 2023–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L460 2022–2024 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Begin with a clean, dry interior. Use an isopropyl alcohol wipe to thoroughly degrease the lower centre console surface where the trim will sit — this is critical for adhesion performance. Unbox the trim and hold it up to the console area without removing the adhesive backing. Confirm the shape, orientation, and edges align correctly with your vehicle's existing panel before proceeding. Compare the trim panel against the reference images provided to ensure you have the correct position and that it matches your specific vehicle's console configuration. Peel back the 3M double-sided adhesive liner from the reverse of the trim panel, taking care not to contaminate the adhesive surface. Carefully position the trim onto the console, starting from one edge and pressing progressively across the surface to eliminate air pockets. Apply firm, even pressure for 30–60 seconds. Allow the adhesive to cure at ambient temperature for a minimum of 30 minutes before use. For best results, avoid exposing the trim to extreme heat or direct sunlight during the initial curing period. ⚠ Important: Always compare the trim panel carefully against the product images and your vehicle's console before removing the adhesive backing. Fitment is specific to the Range Rover Sport L461 (2023–2024). Installation on incompatible vehicles or incorrect positioning may result in adhesive residue on interior surfaces. Complete Your L461 Sport Interior This trim is just one piece of a cohesive interior upgrade story for the Range Rover Sport L461. Browse our full collection of Sport L461 interior accessories — all engineered to the same standard of fit and finish. Shop Range Rover Sport L461 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Verify compatibility against your specific vehicle specification before purchase.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fiber Central Control Storage Box Partition Cover Trim — Land Rover Defender L663 90, 110 & 130 (2020–2023) Instantly refine your Defender's centre console with precision-fit carbon fibre-finish partition covers that blend seamlessly with the cabin's bold, functional aesthetic. Defender L663 2020–2023 90 · 110 · 130 ABS Carbon Fibre Finish Peel & Stick Install Interior Trim 2-Piece Set Brand New Overview The Land Rover Defender L663 is one of the most capable and characterful vehicles on the road — a machine built to perform as well as it looks. The interior of the 2020–2023 generation has been designed with purpose in mind, but for owners who want to push the cabin's finish a little further, the details matter. The central control storage area is one of the most frequently used spaces in the cabin, and a quality trim upgrade here makes a noticeable difference every time you sit behind the wheel. These ABS Carbon Fiber Central Control Storage Box Partition Cover Trims are designed specifically for the Defender L663 platform — covering all three body lengths: the compact 90, the versatile 110, and the long-wheelbase 130. Manufactured from high-grade ABS plastic with a precision carbon fibre texture finish, each piece delivers the visual weight of real carbon fibre without the associated fragility or cost, sitting cleanly against the factory surfaces for a result that looks like it left the factory that way. Installation requires no tools and no professional fitting. The double-sided adhesive backing means you can transform the look of your Defender's centre console in under ten minutes. Whether you're building out a full interior refresh or simply looking for a single, well-chosen upgrade, these covers offer strong visual impact with minimal effort — exactly how a Defender modification should work. What's Included 🪟 Partition Cover Trim × 2 Left and right pieces for full coverage of the central storage box partition 🔲 Pre-Applied Adhesive Double-sided tape pre-fitted to the reverse of each panel — no separate adhesive required 📋 Installation Guide Step-by-step fitting instructions included in the packaging 📦 Protective Packaging Each set is individually packaged to ensure safe, scratch-free delivery Product Highlights Precision-cut to fit the Defender L663 central control storage partition exactly High-grade ABS plastic construction — rigid, lightweight, and built to last Carbon fibre texture finish adds a premium, sporty character to the cabin Pair of covers supplied — complete left and right fitment in one purchase No tools required — installs in minutes with pre-applied double-sided adhesive Resistant to everyday wear, UV exposure, and temperature fluctuations inside the cabin Compatible with all 2020–2023 Defender L663 variants: 90, 110, and 130 Designed to sit flush against factory surfaces with no visible gaps or proud edges Brand new condition — quality-checked before despatch from our warehouse Pairs well with other L663 interior trim upgrades for a fully coordinated finish Compatibility Model Code Year Range Body Length Fitment Land Rover Defender 90 L663 2020–2023 Short Wheelbase Direct Fit Land Rover Defender 110 L663 2020–2023 Standard Wheelbase Direct Fit Land Rover Defender 130 L663 2020–2023 Long Wheelbase Direct Fit Land Rover Defender (Classic) Pre-L663 Pre-2020 All Not Compatible Range Rover Sport L461 / L494 All All Not Compatible Range Rover Vogue L460 / L405 All All Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry interior. Use an isopropyl alcohol wipe to thoroughly degrease the surface of the central control storage box partition where the covers will be applied — this is the most important step for long-term adhesion. Allow the cleaned surface to dry completely for 1–2 minutes before proceeding. Test-fit both partition covers in position without removing the adhesive backing to confirm correct placement and orientation. Peel the protective film from the double-sided adhesive on the back of the first cover, carefully align it to the partition surface, and press firmly into place, working from the centre outward to eliminate any air pockets. Repeat for the second cover on the opposite side. Apply firm, even pressure across the entire surface of each cover for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure at room temperature for a minimum of 24 hours before exposing the trim to extremes of heat or cold. ⚠ Note: Do not attempt installation in cold conditions below 10°C, as adhesive performance may be reduced. Avoid applying in direct sunlight or on a very hot dashboard surface. Once bonded, removal may affect the factory trim surface beneath — fit with care. Complete Your Defender L663 Interior These partition covers are just the beginning. Explore our full range of Land Rover Defender L663 interior accessories — all designed to the same standard of fit, finish, and material quality. Shop Defender L663 Interior Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory parts. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes are used solely for fitment reference purposes. Always verify compatibility with your specific vehicle before purchase. If you have any questions, our team is available on +44 203 943 9919 or via our website chat.

Victorious · Range Rover Vogue L460 · Door Protection ABS Carbon Fiber Door Anti-kick Panel – Range Rover Vogue L460 Premium door protection with authentic carbon fiber styling – guards against scuffs, scratches, and impact damage while elevating your Vogue's interior aesthetic. L460 Vogue 2023–2024 ABS Carbon Fiber Extended Version Peel & Stick Install Overview Designed exclusively for the 2023–2024 Range Rover Vogue L460, this anti-kick panel set protects your door cards from daily wear, impacts, and scuff marks while adding genuine carbon fiber visual depth to your cabin. Whether it's passenger feet during everyday driving or the occasional ding from opening doors in tight parking situations, these panels absorb impact and prevent unsightly damage to your interior trim. Engineered from premium ABS plastic with authentic carbon fiber surface treatment, they're lightweight yet durable, and manufactured to ISO9001 standards by a factory with a proven export track record. The extended version ensures full coverage where protection matters most. Installation is straightforward: clean the door card surface, peel the factory-applied 3M adhesive backing, and press firmly into place. No drilling, no permanence, and no learning curve. If you ever decide to remove them, the panels come away cleanly without residue. What's Included 🛡️ Door Anti-kick Panels (Set) Carbon fiber ABS, extended version 📦 Protective Packaging 100% new, factory sealed box ✔️ Pre-applied Adhesive 3M double-sided tape ready to install 📋 Installation Guidance Fitment verification before application Product Highlights Premium ABS construction with authentic carbon fiber finish Extended coverage version for maximum door card protection Impact and scratch-resistant surface treatment Factory-applied 3M adhesive backing – no tools required ISO9001 certified manufacturing standards Direct fit for Range Rover Vogue L460 (2023–2024) Clean removal without adhesive residue Enhances cabin aesthetics with modern carbon fiber look Lightweight design with durable impact resistance Globally exported quality – trusted by enthusiasts worldwide Compatibility Vehicle Model Code Year Range Fit Status Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L405 (Older Gen) 2013–2022 Not Compatible Range Rover Sport L461 2023–2026 Not Compatible Defender L663 2020–2026 Not Compatible Always verify fitment against provided product images before installation. These panels are engineered specifically for L460 door card geometry and will not fit earlier or later generations. Installation Notes Difficulty: Beginner | Time: 15–20 minutes Prepare the Surface: Clean the door card thoroughly with a dry cloth or isopropyl alcohol wipe. Ensure the area is dust-free and completely dry before proceeding. Verify Fitment: Lay out the panels against your door cards without removing adhesive backing. Confirm alignment and positioning match your vehicle's layout. Peel and Position: Starting at one corner, gently peel back the adhesive backing and press the panel firmly onto the door card. Work gradually across the panel to avoid air bubbles. Apply Pressure: Once positioned, apply steady hand pressure across the entire surface for 10–15 seconds to ensure solid adhesion. Let Cure: Allow 24 hours before closing doors forcefully or exposing the vehicle to direct sunlight to maximize adhesive set strength. ⚠️ Important: Test fit panels against your specific L460 door card before applying adhesive. If fitment is not exact, do not install. Victorious Automotive recommends photographing your door layout and comparing against product images to confirm compatibility. Ready to Protect Your Vogue's Interior? Upgrade your Range Rover Vogue L460 with premium carbon fiber door protection that looks as good as it performs. Order today and enjoy a cleaner, more refined cabin finish. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ 4.9★ rating from 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Expert support +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessories specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names, model codes, and design elements are the property of their respective manufacturers. This product is designed for enthusiasts seeking to customize and protect their vehicles and is sold as-is without warranty from the vehicle manufacturer.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim ABS Carbon Fiber Dashboard Side Decorative Panel Cover — Range Rover Vogue L460 (2023–2024) A precision-engineered interior trim upgrade that brings a bold carbon fibre aesthetic to the L460's dashboard flanks — with no cutting, no drilling, and a factory-clean finish. Vogue L460 2023–2024 ABS Carbon Fibre Finish Direct Adhesive Fit Interior Trim Dashboard Panel ISO9001 Certified No Drilling Required Overview The Range Rover Vogue L460 represents the most technologically advanced and design-forward iteration of the Range Rover bloodline to date. Its interior is a study in precision — sweeping surfaces, architectural detailing, and a cabin environment that rewards closer inspection. For owners who want to push that interior language even further, every detail matters. This ABS Carbon Fibre Dashboard Side Decorative Panel Cover is designed specifically for the 2023–2024 L460 Vogue, fitting with precision along the dashboard flanks to introduce a structured, textured contrast element into the cabin. The carbon fibre-effect surface finish commands attention in the right way — it feels intentional, not aftermarket. Manufactured in an ISO9001-certified facility from high-grade ABS plastic with a layered carbon fibre surface treatment, this panel is engineered to resist scratches, UV fading, and everyday wear. Installation requires no tools — the pre-applied double-sided adhesive bonds cleanly to the OEM surface, leaving no marks if removed carefully. It's the kind of upgrade that looks like it belongs. What's Included 🧩 Dashboard Side Panel Set Full pair — left and right covers included 🔲 Pre-Applied Adhesive Tape Double-sided tape bonded to rear of each panel 📦 Protective Packaging Individually wrapped, boxed for safe transit 📋 Installation Guidance Basic fitting reference included in box Product Highlights Precision-moulded specifically for the 2023–2024 Range Rover Vogue L460 dashboard profile Premium ABS construction with a high-definition carbon fibre surface treatment Scratch and wear resistant coating maintains appearance over time Pre-applied 3M-grade double-sided adhesive for clean, tool-free installation UV-stable finish resists fading from direct sunlight exposure Manufactured under ISO9001 quality management certification Supplied as a complete set — both dashboard side panels included No drilling, cutting, or modification to factory interior required Lightweight and low-profile — no visible thickness when fitted Reversible installation — can be removed without damage to OEM surfaces Compatibility Model Code Year Range Fit Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L460 2022 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 15–25 Minutes  |  🔧 Tools Required: None Begin with the vehicle parked and the interior at ambient temperature. Avoid installation in very cold or very hot conditions, as this can affect adhesive performance. Thoroughly clean the dashboard side surface using an isopropyl alcohol wipe or a clean, dry microfibre cloth. Remove all dust, grease, and residue — this step is critical to long-term bond strength. Dry-fit each panel before committing to adhesion. Hold each piece in position to confirm alignment with the contours of your specific dashboard. Peel the protective backing from the double-sided adhesive tape on the rear of the panel. Starting from one edge, press the panel firmly into position using steady, even pressure. Work across the full surface to eliminate any air gaps. Apply firm pressure across the entire panel for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing the surface to moisture or heavy cleaning. ⚠ Important: Do not attempt installation on a dirty, oily, or damp surface. Failure to clean the substrate properly is the most common cause of adhesion failure. If your dashboard features a textured or heavily grained surface, press firmly into recesses to ensure full contact. Complete Your L460 Interior Explore our full range of Range Rover Vogue L460 interior accessories — from door panel trims to centre console upgrades — all engineered to the same standard as this dashboard panel set. Shop All L460 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and designations are referenced solely for compatibility purposes. Verify your vehicle's dashboard variant before purchase — if in doubt, contact our team on +44 203 943 9919.

Victorious · Defender 110 · Door Protection ABS Carbon Fibre Door Protection Panel – Defender 110 (2020–2021) Premium anti-kick and mud protection with authentic carbon fibre finish for your Defender 110. L663 Defender 110 2020–2021 ABS Carbon Fibre Anti-Kick 4-Piece Set Adhesive Install Overview The Defender 110 (L663) demands protection as much as it demands respect. Whether you're navigating tight trails, working on-site, or parking in crowded urban spaces, your door panels are vulnerable to scuffs, kicks, and mud splash that permanently damage paintwork. These ABS carbon fibre door protection panels are engineered to absorb impact while adding aggressive visual definition. The premium carbon fibre finish complements the Defender's rugged aesthetic without looking aftermarket. Four pieces cover both front and rear door lower sections where damage occurs most—exactly where mud, stones, and careless kicks do the most harm. Installation uses automotive-grade adhesive tape: no drilling, no permanent modification, fully reversible. Each panel is precision-cut to fit the Defender 110 contours perfectly. The result is robust, authentic protection that works as hard as your vehicle does. What's Included 🛡️ Front Left Door Panel Pre-fitted adhesive, ready to install 🛡️ Front Right Door Panel Pre-fitted adhesive, ready to install 🛡️ Rear Left Door Panel Pre-fitted adhesive, ready to install 🛡️ Rear Right Door Panel Pre-fitted adhesive, ready to install Product Highlights Genuine ABS carbon fibre construction Protects against mud, scratches, and impact damage OEM-quality fitment for Defender 110 L663 Automotive-grade adhesive tape (no drilling required) Fully reversible—no permanent modification Aggressive aesthetic enhances factory design Covers high-impact door lower sections Easy 30-minute installation UV-stable finish resists fading Complete 4-piece set included Compatibility Vehicle Year Range Fitment Land Rover Defender 110 (L663) 2020–2021 Direct Fit Land Rover Defender 110 (L663) 2022+ Not Compatible Land Rover Defender 90 (L663) 2020–2021 Not Compatible Land Rover Defender 130 (L663) 2020–2021 Not Compatible Installation Guide Adhesive Tape Installation – 30 Minutes Clean door surfaces: Wash and dry all door lower panels thoroughly. Use isopropyl alcohol on a clean cloth to remove any residue or wax. Allow 10 minutes to dry completely. Position panels: Test-fit each panel on its corresponding door. Align with factory body lines and door edges. Mark alignment points lightly with tape if needed. Apply adhesive: Remove backing from pre-applied adhesive tape on panel reverse. Press firmly onto door, starting from the top and working downward to avoid air pockets. Secure for 24 hours: Do not open doors or subject to vibration for 24 hours while adhesive sets fully. Park on level ground. Final inspection: Check all four panels are flush with door surfaces and fully adhered around edges. ⚠️ Important: Adhesive strength depends on clean, dry surfaces. Poor surface preparation will result in premature separation. Do not install in temperatures below 10°C or above 35°C. Protect Your Defender. Order Today. These carbon fibre door protection panels are engineered for the serious Defender owner who refuses to compromise on aesthetics or durability. Add them to your build now. Shop Defender 110 Accessories Use code 22GET20 for 20% off when you buy 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or any official Land Rover entity. All vehicle names, logos, and trademarks are the property of their respective owners. Product descriptions are for compatibility reference only.

Victorious · Mercedes G Class · Interior Trim ABS Carbon Fiber Interior Door Handle Cover Trim for Mercedes-Benz G Class W463 Elevate your G-Wagon's cabin with premium carbon fiber door handle trims that blend motorsport aesthetics with refined German engineering. W463 (2019–2022) Carbon Fiber Finish ABS Plastic Interior Upgrade Direct Fit Overview The Mercedes-Benz G Class W463 demands interior touches that respect its legendary legacy whilst adding contemporary flair. These ABS carbon fiber door handle cover trims are engineered to transform your cabin's visual presence, delivering a cohesive upgrade that catches light and elevates tactile feedback every time you operate your doors. Each trim combines genuine carbon fiber finish aesthetics with durable ABS construction, ensuring resistance to daily wear, UV exposure, and temperature fluctuation. The precise-fit design guarantees zero gaps or misalignment, maintaining the OEM quality standard your G-Wagon deserves. Installation requires no modifications to your vehicle. Double-sided adhesive tape provides a secure, tool-free fit that respects your interior's original finish and can be safely removed if needed without residue or damage. What's Included 🏷️ 4x Door Handle Trims All four doors covered 🔌 Adhesive Tape Pre-applied for quick fit 📋 Fitting Guide Step-by-step instructions ✓ Quality Checked Pre-delivery inspection Product Highlights Premium ABS plastic with authentic carbon fiber weave finish Engineered for 2019–2022 Mercedes G Class W463 models Secure adhesive installation—no drilling, tools, or modifications required UV-resistant coating protects against fading and discoloration Precision-moulded to match OEM door handle geometry Lightweight construction maintains cabin balance and dynamics Removable installation preserves original interior finishes Temperature-stable material resists warping in extreme conditions Complements factory alloy trims and leather upholstery Professional finish elevates perceived cabin quality and exclusivity Compatibility Vehicle Model Year Range Status Mercedes-Benz G Class (W463) 2019–2022 Direct Fit Mercedes-Benz G Class (W463A) 2023+ Not Compatible Mercedes-Benz G Class (W460) Pre-2019 Not Compatible We recommend verifying your vehicle's exact production year via VIN before purchase. Contact our team for clarification on boundary years or regional variants. Installation Difficulty: Easy | Time: 15–20 minutes Prepare the surface: Clean each door handle cover area with a microfibre cloth and isopropyl alcohol. Allow 2 minutes to dry completely. Remove backing tape: Peel the white backing strip from the pre-applied adhesive tape on each trim. Position the trim: Align the cover with the door handle surround. Start from the top and press downward firmly, holding pressure for 10 seconds per trim. Repeat on all doors: Apply remaining three trims to driver, passenger, and rear doors using identical technique. Allow cure time: Do not operate doors for 2 hours. Adhesive reaches full strength after 24 hours. Important: Ensure all surfaces are clean and dry before application. Adhesive will not bond to dirt, moisture, or factory protective film. If removal is necessary, gently peel from corners using a plastic scraper. Test in a hidden area first to confirm adhesive compatibility with your cabin's finish. Complete Your G-Wagon Interior Today These carbon fiber door handle trims are the perfect foundation for a comprehensive cabin refresh. Pair with matching steering wheel trim, gear surround, or dashboard accents for a fully coordinated cockpit aesthetic. Browse G Class Collection Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any OEM manufacturer. All product names, logos, and trademarks mentioned remain the property of their respective owners. This product is designed for fitment purposes only and does not imply endorsement by any original equipment manufacturer.

Victorious Automotive · Defender L663 · Interior Protection ABS Carbon Fiber Rear Armrest Box Anti-Kick Cover for Land Rover Defender 110 & 130 (2020+) A precision-formed ABS carbon fibre kick cover that guards the rear armrest box of your Defender L663 against everyday scuffs, scratches, and heel damage — with a factory-finish aesthetic that looks entirely at home. Defender L663 2020–2026 High-Quality ABS Carbon Fibre Finish Anti-Kick Protection No-Drill Install Rear Armrest Box Model: XYL1446 Overview The Land Rover Defender 110 and 130 (L663, 2020 onwards) represents an entirely new chapter for one of the most iconic vehicles ever made — and its interior reflects that ambition. Clean lines, purposeful surfaces, and a level of refinement that earlier Defenders never offered. Protecting those surfaces from the inevitable wear of daily life is where this rear armrest box anti-kick cover comes in. Engineered specifically for the rear centre armrest box panel area of the L663 Defender, this cover wraps the lower section in a durable, high-quality ABS shell finished in a striking carbon fibre texture. This is the zone that takes the most punishment from rear passengers — boots, bags, and casual contact all take their toll. Without protection, scuffs and scratches accumulate quickly and are disproportionately noticeable on an otherwise clean interior. The fit is precise and purposeful. Using automotive-grade adhesive tape, this cover applies cleanly without drilling, cutting, or any modification to the vehicle's original trim. The carbon fibre finish integrates naturally with the Defender's utilitarian-premium aesthetic, adding a layer of visual intent without looking out of place. A small upgrade with a quietly significant impact on the long-term condition of your interior. What's Included 🛡️ Anti-Kick Cover 1 × ABS carbon fibre rear armrest box protection panel 🔧 Adhesive Tape Pre-applied automotive-grade 3M-style mounting tape 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Designed exclusively for the Defender L663 110 & 130 (2020+) Premium ABS construction — rigid, lightweight, and durable Carbon fibre texture finish for a refined, sporty aesthetic Guards against scuffs, heel strikes, and surface scratches No-drill, no-modification installation — fully reversible Automotive-grade adhesive tape pre-applied for clean fitment Exact dimensions: 34cm (L) × 30cm (W) × 6cm (H) Lightweight at just 366g — no impact on vehicle dynamics Complements factory trim without looking aftermarket Maintains original panel access and armrest functionality Compatibility Vehicle Code Year Range Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Defender (Original) Pre-2016 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin by thoroughly cleaning the rear armrest box panel surface using an isopropyl alcohol wipe. Remove all dust, grease, and moisture, and allow to dry completely before proceeding. Offer the cover up to the panel to confirm alignment and fitment before removing any adhesive backing. Note the orientation and any contour points. Peel back a small section of the adhesive backing to expose the tape. Carefully position the cover from one edge, pressing firmly as you work across the surface to avoid air pockets. Once fully seated, apply firm and even pressure across the entire cover for 30–60 seconds to ensure maximum adhesive contact with the panel surface. Allow at least 72 hours before subjecting the cover to heavy use or pressure, giving the adhesive bond time to fully cure. Note: Do not apply in temperatures below 10°C — cold surfaces significantly reduce adhesive performance. Ensure the vehicle has been at room temperature for at least one hour before fitting. If your vehicle has been recently detailed or treated with a silicone-based product, clean the surface thoroughly before installation. Complete Your Defender's Interior Browse our full collection of Defender L663 interior accessories — from carbon fibre trims and armrest covers to dashboard overlays and door panel protectors. Every piece is selected to complement the Defender's character without compromising it. Shop Defender L663 Interior → 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or an authorised dealer of Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase.

BMW · Interior · Carbon Fiber Trim ABS Carbon Fiber Roof Dome Microphone Cover Trim for BMW X3, X5, 3/4/5/6 Series (2023+) Premium carbon fiber finish microphone covers that elevate interior aesthetics with a sophisticated, modern touch for newer BMW models. BMW X3 BMW X5 2023+ Carbon Fiber ABS Material Roof Dome Overview Designed for modern BMW X3, X5, and sedan owners who demand refined interior upgrades, these roof dome microphone covers transform a functional component into a stylish accent piece. The 2023+ generation of BMW vehicles features prominent roof dome mics—this trim elevates them from purely utilitarian to design-forward. Each cover is precision-engineered in high-quality ABS material with an authentic carbon fiber texture finish. The lightweight construction ensures zero additional stress on roof-mounted hardware while the matte black carbon aesthetic complements factory finishes across the 3, 4, 5, and 6 Series lineup as well as X3 and X5 models. Installation is straightforward—simple alignment and secure fit without drilling or permanent alteration. These covers work because they address a gap in factory styling: microphone domes were never meant to be visual focal points. Our trim shifts that reality, giving detail-oriented BMW owners a way to integrate every surface into their vehicle's design language. Paired with other carbon fiber accents or kept standalone, they deliver noticeable interior refinement. What's Included 🎯 1 Pair of Covers Left & right roof dome microphone trim pieces ✓ Pre-Cut & Ready Precision-fit for immediate installation 📋 Installation Guide Step-by-step instructions included 🛡️ Protective Packaging Secure transit protection Product Highlights Premium ABS composite with authentic carbon fiber texture Lightweight design—negligible weight addition Matte black finish complements modern BMW interiors Custom-fit for perfect alignment on roof dome Durable and resistant to UV degradation No drilling, adhesive-backed installation Enhances vehicle sophistication and detail appeal Compatible with factory microphone operation Easy to clean and maintain Precision manufacturing tolerances Compatibility Model Series Generation / Code Year Range Status BMW 3 Series F30 (Sedan) 2023+ Direct Fit BMW 4 Series F32 (Coupe/Gran Coupe) 2023+ Direct Fit BMW 5 Series F10 (Sedan) 2023+ Direct Fit BMW 6 Series F12 (Coupe) 2023+ Direct Fit BMW X3 F25 (SUV) 2023+ Direct Fit BMW X5 F15 (SUV) 2023+ Direct Fit BMW 7 Series F07 (Gran Turismo) 2023+ Direct Fit Pre-2023 Models All Codes –2022 Not Compatible Installation Notes Installation Difficulty: Beginner | Time: 10–15 Minutes Locate roof dome microphone covers on your BMW's interior headliner. Clean the microphone dome surfaces thoroughly with a microfiber cloth to remove dust and oils. Carefully peel the adhesive backing from the carbon fiber cover trim piece. Align the left cover with the left microphone dome, ensuring centered, straight positioning. Press firmly across the entire surface for 10–15 seconds to activate adhesive bond. Repeat Steps 4–5 for the right microphone dome cover. Allow 24 hours of cure time before handling or cleaning the roof area. Important: Do not install on wet or dirty surfaces. Microphone function is not affected by these trim covers; however, ensure covers do not obstruct any sensor points on the dome. Upgrade Your BMW Interior Today Transform overlooked microphone domes into design details. These carbon fiber covers deliver the refined finish your BMW deserves—the kind of attention to detail that separates vehicles cared for with precision from the rest. Shop Roof Dome Covers Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm This product is manufactured by Victorious Automotive and is not affiliated with, endorsed by, or connected to BMW Group, Bayerische Motoren Werke AG, or any official BMW brand entity. All vehicle names, logos, and specifications referenced are the property of their respective manufacturers and are used for identification purposes only. Victorious Automotive is an independent aftermarket accessory supplier.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fiber Seat Back USB Port Panel Frame for Land Rover Defender 110 (2020–2026) L663 A precision-fit carbon fibre panel overlay that brings a sharper, more customised presence to the Defender 110's rear seat USB port surrounds — no drilling, no compromise. Defender L663 2020–2026 ABS Carbon Fibre Direct Fit Interior Trim USB Port Panel Seat Back Adhesive Install No Drilling Overview The Land Rover Defender 110 L663 redefined what a modern off-road icon could look like — and owners who've invested in one know that every detail matters. The interior, while thoughtfully designed from the factory, offers genuine scope for personalisation, particularly in areas like the rear seat panel surrounds where OEM plastics can look understated relative to the rest of the cabin's character. This seat back USB port panel frame is engineered specifically for the 2020-onward Defender 110 L663. Constructed from high-grade ABS with a precision-applied carbon fibre finish, it overlays the existing USB port surround panels on the rear seat backs with a clean, textured look that adds depth and visual contrast. The result is a subtle but immediately noticeable upgrade — exactly the kind of refinement that discerning Defender owners appreciate. Fitment is handled through pre-applied automotive-grade adhesive tape, meaning the installation process is clean, reversible if needed, and requires no specialist tools. Whether you're building out a fully kitted interior or simply adding considered finishing touches, this panel is a low-effort, high-impact addition to your L663's cabin. What's Included 🪑 Seat Back USB Panel Frame × 2 Carbon fibre finish ABS overlays, one per seat back position 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape, factory-applied to each panel 📋 Installation Guidance Basic fitting instructions included with each order Product Highlights Precision-engineered to fit the Defender 110 L663 seat back USB port surround exactly High-quality ABS substrate with durable carbon fibre texture finish Lightweight construction — adds zero meaningful weight to the interior Pre-applied automotive adhesive tape for a clean, tool-free installation Retains full access and functionality of the USB ports beneath Resistant to UV fading and everyday interior wear and abrasion Adds visual contrast and a premium carbon accent to the rear cabin No permanent modification — fully reversible installation method Ships as a matched pair for left and right seat back positions Compatible across all trim levels of the 2020–2026 Defender 110 L663 Compatibility Model Code Year Range Trim Level Fitment Defender 110 L663 2020–2026 Standard / S / SE Direct Fit Defender 110 L663 2020–2026 HSE / X / X-Dynamic Direct Fit Defender 110 L663 2020–2026 First Edition / 75th Anniversary Direct Fit Defender 90 L663 2020–2026 All Trims Verify Before Purchase Defender 130 L663 2022–2026 All Trims Verify Before Purchase Range Rover Sport L461 / L494 All Years All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle parked and the interior at or above room temperature — cold surfaces can reduce adhesive bond strength significantly. Fold the rear seat forward or gain clear access to the seat back USB port panels you intend to trim. Using a clean microfibre cloth and isopropyl alcohol (IPA), thoroughly clean the plastic surface around the USB port surrounds. Remove any dust, oils, or residue and allow to dry completely for at least 2–3 minutes. Dry-fit each panel frame against the USB port surround to confirm alignment and orientation before committing. Note the correct position carefully. Peel the protective backing from the pre-applied adhesive tape on the first panel frame. Align the panel carefully over the USB port surround and press firmly into place, applying even pressure across the full surface for 30–60 seconds. Repeat for the second panel frame on the opposing seat back. Allow a minimum of 24 hours before exposing the panels to sustained pressure or cleaning products to allow the adhesive to fully cure. ⚠ Important: Do not attempt installation on a cold or damp surface. Adhesive performance is significantly reduced below 15°C (59°F). If removing panels in future, use a plastic trim pry tool and apply gentle heat with a heat gun or hairdryer to release the adhesive without marking the underlying trim. Complete Your Defender 110 Interior Browse our full range of precision-fit interior accessories designed exclusively for the Defender L663 — from dashboard trim overlays to door panel accents and centre console upgrades. Shop Defender L663 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover Vogue L460 · Exterior Styling ABS Carbon Fiber Side Fender Frame Cover Sticker — Range Rover Vogue L460 2023 A precision-engineered carbon fibre fender trim that sharpens the exterior presence of your Range Rover Vogue L460 with zero compromise on fit or finish. Range Rover Vogue L460 2023 Model Year ABS Material Carbon Fibre Finish Side Fender Trim Adhesive Fit Exterior Styling No Drilling Overview The fifth-generation Range Rover Vogue L460 is one of the most architecturally refined SUVs ever produced — a vehicle where every surface detail contributes to an overall sense of restrained authority. Owners who choose to personalise their L460 understand that any addition must meet that same exacting standard. Poorly fitted or visually mismatched trim has no place on a vehicle of this calibre. These ABS Carbon Fiber Side Fender Frame Cover Stickers are engineered specifically for the 2023 Range Rover Vogue L460, following the exact body contours of the fender aperture to deliver a flush, factory-coherent result. The carbon fibre surface finish adds a motorsport-inspired layer of visual depth that contrasts beautifully against both body colour and the L460's signature flush glazing architecture. Constructed from high-grade ABS — a material chosen for its dimensional stability, UV resistance, and impact tolerance — these covers won't warp, fade, or peel under the demands of everyday driving. Installation requires no specialist tools and no modification to your vehicle's bodywork, making this one of the most accessible yet impactful exterior upgrades available for the L460. What's Included 🪄 Side Fender Frame Cover Stickers 2 pieces — left & right pair 🔲 Pre-Applied Double-Sided Adhesive Factory-grade bonding tape pre-fitted 📋 Fitment Reference Guide Alignment imagery for precise positioning Product Highlights Precision-moulded specifically for the Range Rover Vogue L460 2023 body profile Premium ABS construction — resistant to impact, UV degradation, and warping Carbon fibre surface finish adds visual depth and a performance-inspired aesthetic Pre-applied double-sided adhesive tape for a clean, tool-free installation Full left and right pair included — no need to purchase separately Flush fitment follows the fender frame line for a factory-integrated appearance Lightweight design adds no meaningful mass to the vehicle No drilling, no cutting, and no permanent modification to your bodywork Colour-consistent carbon weave pattern across both pieces for a matched finish Enhances kerb presence without altering the L460's signature design language Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L460 2023 Direct Fit Range Rover Vogue L460 2022 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Thoroughly clean the fender frame area with an isopropyl alcohol wipe and allow to dry completely. Any residual wax, polish, or road film will compromise adhesion. Hold the cover against the fender without removing the adhesive backing and reference the fitment guide to confirm correct positioning and orientation for each side. Starting from one end, carefully peel back a small section of the adhesive liner. Align the leading edge of the cover with the fender frame profile. Progressively peel the liner while pressing the cover firmly into position, working along the full length to eliminate any air pockets or lifting edges. Apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond. Pay particular attention to corners and ends. Allow the adhesive to cure for a minimum of 24 hours before the vehicle is exposed to rain, car washing, or pressure cleaning. ⚠ Note: Do not attempt installation in temperatures below 10°C (50°F) as cold conditions significantly reduce adhesive performance. If unsure about alignment, perform a dry-fit test and photograph your reference points before committing to the final bond. Complete Your L460's Exterior Explore our full collection of precision-engineered exterior accessories designed exclusively for the Range Rover Vogue L460 — from mirror caps and grille surrounds to door handle covers and bonnet trim. Shop Range Rover Vogue L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.