Key Covers

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Silver & Gold Door Window Switch Frame Trim for Range Rover Vogue L405 & Range Rover Sport L494 (2013–2021) Crystal-embellished door switch frame trims that bring Swarovski-style sparkle and bespoke character to your Range Rover's interior in under two minutes. Range Rover Vogue L405 Range Rover Sport L494 2013–2021 Silver & Gold Swarovski-Style Crystals Chrome Accents 4-Piece Set No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent two of the most respected luxury SUVs ever produced — cabins defined by clean lines, premium materials, and a sense of composed sophistication. For owners who want to take that interior aesthetic one step further, the door window switch surrounds are a subtle but immediately visible canvas for personalisation. These door window switch frame trims are precision-cut to sit flush over the existing switch panels on all four doors, replacing the factory-finish surround with a statement piece finished in your choice of Silver or Gold. Each trim is studded with Swarovski-style crystals and framed with chrome detailing — delivering a diamond-cut sparkle that catches the light beautifully without overwhelming the cabin's original character. The appeal here is in the detail. Whether you're stepping into your Vogue after a long day or chauffeuring guests in your Sport, these trims communicate care and individuality. They fit using pre-applied adhesive backing, meaning installation requires no tools, no drilling, and no specialist knowledge — just a clean surface and two minutes of your time. What's Included 💎 Front Left Door Trim Crystal & chrome switch frame surround 💎 Front Right Door Trim Crystal & chrome switch frame surround 💎 Rear Left Door Trim Crystal & chrome switch frame surround 💎 Rear Right Door Trim Crystal & chrome switch frame surround 🔧 Pre-Applied Adhesive 3M-style backing — no tools required 📋 Fitting Instructions Step-by-step guide included in packaging Product Highlights Precision-cut to match L405 Vogue and L494 Sport door switch panel geometry exactly Available in Silver and Gold finishes to complement both light and dark interior colourways Swarovski-style crystal embellishments for genuine luxury sparkle Chrome and diamond-cut detailing frames each trim for added visual depth Pre-applied adhesive backing means zero tools and zero damage to factory panels Full four-door coverage in a single set — front and rear doors included Slim profile sits flush to the door card surface without any unsightly gaps Durable construction resists daily contact, UV light, and interior temperature fluctuations Reversible upgrade — trims can be removed without leaving residue on factory panels Installation takes under two minutes per door — complete the full set in one go Compatibility Model Code Year Range Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 5–10 minutes (full set) Start with a clean, dry interior. Use an isopropyl alcohol wipe to degrease the existing door switch frame surround on each door — this ensures maximum adhesive bond. Unwrap each trim piece and identify which piece corresponds to each door (front left, front right, rear left, rear right). Test the fit dry before peeling the adhesive backing. Peel the protective film from the adhesive backing on the first trim piece. Align the trim carefully over the switch surround, starting from one edge and pressing down gradually to avoid air bubbles. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond fully. Repeat for all four doors. Allow 30 minutes for the adhesive to fully cure before operating the windows repeatedly. ⚠ Important: Please verify your vehicle's model code (L405 or L494) and model year before ordering. Switch panel geometry changed significantly with the 2022 model year refresh on both the Vogue (L460) and Sport (L461). This product is not compatible with 2022 and newer variants. Elevate Every Detail At Victorious Automotive, we believe the finest Range Rovers are defined by the details their owners choose. These door switch frame trims are a simple, reversible, and genuinely beautiful upgrade for any L405 or L494 interior. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Buying 2 or more items? Use code 22GET20 for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG; this product uses Swarovski-style crystals and is not affiliated with or endorsed by Swarovski AG.

Automotive · Porsche · Interior Styling Carbon Fiber Color Fob Remote Key Case Shell for Porsche Premium carbon fiber finish key fob replacement—authentic styling upgrade for 911, Boxster, Cayman, Panamera, Cayenne, and Macan models. Porsche Multi-Model Carbon Fiber Key Fob Shell Premium Finish Direct Fit Overview Whether you drive a Porsche 911 Carrera, Boxster, Cayman, Panamera, Cayenne, or Macan, your key fob is an extension of your vehicle's design language. This carbon fiber color key case shell delivers an instant aesthetic upgrade—transforming a standard plastic fob into a luxury-finish accent that complements your Porsche's engineering and attention to detail. Crafted from durable plastic with a convincing carbon fiber weave texture, this shell case offers the premium look of real carbon fiber without the premium price tag. The finish resists fingerprints and maintains its appearance over time, making it as practical as it is stylish. Installation is effortless: simply open your existing key fob, transfer the internal components, and snap this shell in place. No tools required, no modifications to your key mechanism. A perfect entry point for Porsche enthusiasts looking to add a touch of motorsport-inspired styling to their daily carry. What's Included 🔑 Carbon Fiber Key Shell Single replacement fob case with weave texture 📖 Installation Guide Step-by-step transfer instructions Product Highlights Carbon fiber weave finish—premium aesthetic upgrade Durable plastic construction—designed for daily use Universal fit—compatible with multiple Porsche key types Tool-free installation—no disassembly of key electronics Fingerprint-resistant coating—maintains appearance Motorsport-inspired styling—complements any Porsche interior Lightweight design—preserves original key functionality Precision-molded edges—seamless fit over existing fob Easy component transfer—preserves all key functions Professional finish—looks factory-integrated Compatibility Porsche Model Compatibility Porsche 911 / Carrera Direct Fit Porsche Boxster Direct Fit Porsche Cayman Direct Fit Porsche Panamera Direct Fit Porsche Cayenne Direct Fit Porsche Macan Direct Fit Installation Difficulty: Easy | Time: 5 minutes Gently pry open your existing Porsche key fob using a plastic spoon or flat tool—start at the seam between the two halves Carefully separate the fob halves and note the position of internal components (circuit board, battery, rubber pad) Transfer the circuit board and battery to the new carbon fiber shell case Align the rubber directional pad with its designated slot in the new shell Press the shell halves together firmly until you hear a soft click—ensure the fit is snug but don't force Test all key functions (lock, unlock, trunk release) before regular use Note: Do not use metal tools or apply excessive force when opening your original fob—this may damage internal components. If your key fob contains a mechanical blade, ensure it is properly repositioned before closing the new shell. Why Choose Victorious We're automotive enthusiasts who understand the Porsche owner's mindset: every detail matters, and authenticity runs deep. This carbon fiber key shell delivers genuine styling upgrade without compromise. 30-day money-back guarantee on every purchase. If it's not what you expected, we'll make it right—no questions asked. Ready to Upgrade Your Key Fob? Add motorsport-inspired styling to your daily carry. This carbon fiber shell transforms your Porsche key into a premium accessory that reflects your vehicle's engineering excellence. Shop Now Use code 22GET20 for 20% off any 2 items. 4.9/5 rating from 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS, TNT Call +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with Porsche AG, Porsche Cars North America, or Porsche Stuttgart. Porsche is a registered trademark of Dr. Ing. h.c. F. Porsche AG. This product is an aftermarket accessory designed for fitment to Porsche vehicles. All vehicle names and model designations are used for identification purposes only and do not imply endorsement or affiliation with their respective manufacturers.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Upgrades Terrain Response Control Panel Trim Upgrade for Range Rover Vogue & Sport (2013–2021) A precision-crafted, heavyweight chrome trim upgrade that transforms the Terrain Response control panel into a tactile, jewel-like centrepiece worthy of your Range Rover's cabin. L405 Vogue L494 Sport 2013–2021 Heavyweight Metal Chrome Finish Silver & Gold Options Laser-Cut Diamond Detail Direct Fit Sub-5 Min Install Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent a generation of vehicles that set the benchmark for luxury SUV interiors — refined materials, tactile controls, and an unmistakable sense of occasion. The Terrain Response system sits at the heart of the driving experience, and for owners who demand every detail to reflect the same standard as the vehicle itself, the factory selector trim can feel like a missed opportunity. This Terrain Response Control Panel Trim Upgrade is engineered specifically for the L405 and L494 platforms, replacing the standard adjustment knobs with components machined from heavyweight metal and finished in polished chrome. Each piece features laser-cut diamond embossing — a detail that catches light from every angle and adds genuine tactile depth to the centre console interaction. Available in classic silver or warm gold, the choice allows you to complement factory piano black, carbon fibre, or wood veneer trim packages with equal precision. What sets this upgrade apart from lesser alternatives is its material integrity. There is no plastic substrate, no peeling coating, and no compromise on feel. The weight of the metal communicates quality the moment your hand makes contact — exactly the kind of sensory detail that Range Rover ownership is built around. Installation requires no tools, no permanent modification, and under five minutes to complete. What's Included 🎛️ Terrain Response Trim Knobs Pair of heavyweight chrome-finished adjustment knobs with diamond embossing 📋 Installation Guide Step-by-step fitting instructions included in the box 📦 Protective Packaging Premium presentation packaging suitable for gifting Product Highlights Precision-engineered replacement knobs built specifically for L405 and L494 Terrain Response panels Heavyweight metal construction — no plastic, no compromise on tactile quality Polished chrome finish for a premium, factory-elevated appearance Laser-cut diamond embossing for refined grip texture and visual depth Available in silver or gold to suit your interior trim colour palette Direct-fit design — no drilling, cutting, or permanent modification required Sub-5 minute installation with no tools needed Resists fingerprints and daily wear — built for long-term use Compatible with both standard and HSE, Autobiography, and SVAutobiography trim levels Elevates the centre console from functional to focal — a natural complement to any interior upgrade Compatibility Model Code Years Trim Level Fitment Range Rover Vogue L405 2013–2021 SE, HSE, Autobiography, SVAutobiography Direct Fit Range Rover Sport L494 2013–2021 SE, HSE, HSE Dynamic, SVR, Autobiography Direct Fit Range Rover Vogue L460 2022–2026 All Not Compatible Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Defender L663 2020–2026 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 5 Minutes  ·  Tools Required: None Ensure your vehicle is parked safely with the engine off and the Terrain Response selector in a neutral or default position. Grip the existing factory Terrain Response knob firmly and pull upward with steady, even pressure to release it from the selector shaft. No clips or screws are used on the OEM unit. Inspect the selector shaft to ensure it is clean and free of debris before fitting the new trim knob. Align the new heavyweight chrome knob over the selector shaft, ensuring the internal collar is centred correctly. Apply firm downward pressure until the knob seats fully and securely onto the shaft — you will feel it click into position. Repeat the process for the second knob if your vehicle configuration features dual selectors. Cycle through the Terrain Response modes to confirm full functionality and secure fitment before driving. Note: If you are unsure which model year or variant your vehicle is, check your VIN plate or contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Fitting to an incompatible platform may result in poor retention or incorrect selector function. Upgrade Your Range Rover Interior Today Every detail matters inside a Range Rover. Browse our full collection of interior trim upgrades for the L405 Vogue and L494 Sport — and save 20% when you add any two items to your order. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Memory Seat Adjustment Trim – Silver & Gold Swarovski-Style Finish for Range Rover Vogue & Sport (2002–2013) A four-piece peel-and-stick trim set that transforms your memory seat controls into a polished, crystal-accented detail — installed in under two minutes, no tools required. L322 Vogue 2002–2012 L320 Sport 2005–2013 Silver & Gold Swarovski-Style Crystal Chrome Accent Peel & Stick Under 2 Minutes Four-Piece Set Overview The Range Rover Vogue L322 and Range Rover Sport L320 represented a generation of genuinely luxurious SUVs — cars whose interiors were designed to impress from the moment the door closed. After years of ownership, even the finest cabins can benefit from a refresh, and it's often the smallest details that make the biggest difference to how a space feels. These memory seat adjustment trims are designed specifically for the seat control panels found in 2002–2013 Range Rover Vogue and Range Rover Sport models. Each trim is finished in your choice of silver or gold, and features a Swarovski-style crystal detailing set alongside polished chrome elements — adding a refined, jewelled accent to controls you interact with every single journey. Engineered for a completely tool-free installation, the set uses pre-applied 3M-grade adhesive tape that bonds cleanly and securely to the existing control surrounds. There is no cutting, no drilling, and no risk of damage to your original trim. The result is a factory-quality appearance upgrade that takes less time to fit than it does to detail your steering wheel. What's Included 💎 Memory Seat Trim × 4 Complete four-piece set covering all seat memory control positions 🔲 Pre-Applied Adhesive 3M-grade double-sided tape fitted to each trim — ready to install 📋 Fitting Guide Step-by-step instructions for a clean, aligned installation ✨ Crystal Accents Swarovski-style stones set within each trim piece for premium finish Product Highlights Precision-cut to match OEM seat control panel dimensions on L322 and L320 models Available in silver and gold colourways to complement light and dark interior themes Swarovski-style crystal stones add genuine sparkle without appearing aftermarket Polished chrome finish resists fingerprints and maintains its lustre over time Pre-applied 3M adhesive ensures a secure, long-lasting bond with zero residue on removal Tool-free installation — no drilling, cutting or panel removal required Installs in under two minutes per trim piece — full set done in one sitting Crafted from high-quality ABS with a durable plated outer layer Ideal for owners looking to refresh an ageing interior or personalise a recently acquired vehicle Makes a considered, understated gift for any Range Rover enthusiast Compatibility Model Code Years Fit Range Rover Vogue L322 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: Under 10 minutes (full set)  ·  Tools Required: None Ensure the seat control panel surface is clean, dry and free from any dust, grease or polish residue. A quick wipe with an isopropyl alcohol wipe is ideal preparation. Dry-fit each trim piece before committing — hold it in position over the corresponding control to confirm alignment and coverage. Peel the backing from the pre-applied adhesive tape on the first trim piece, taking care not to touch the adhesive surface. Position the trim carefully over the seat control, aligning edges with the panel surround, then press firmly and hold for 30 seconds to allow the bond to set. Repeat for the remaining three trim pieces. Allow 60 minutes before any contact with the trim to ensure full adhesion. Note: Do not apply these trims over damaged, peeling or previously adhesive-treated surfaces — bond strength and finish quality may be compromised. If your existing control panel trim is lifting or cracked, we recommend addressing this before installation. Upgrade Your Interior Today Small details define great interiors. These memory seat trims are one of the simplest ways to bring a fresh, bespoke feel to your Range Rover Vogue or Sport — and they arrive ready to fit the moment the parcel lands. Shop Range Rover Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Steering Wheel Button Trim in Silver & Gold — Range Rover Vogue & Sport (2014–2017) Crystal-embellished chrome steering wheel button trim that brings a bespoke, jewelled finish to the L405 Vogue and L494 Sport cabin — fitted in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2017 Chrome Finish Swarovski-Style Crystals Silver & Gold No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 were built to a standard that few rivals could match — full-width instrument panels, Windsor leather, and a cabin that genuinely felt hand-crafted. But even in that environment, the steering wheel controls can feel like a missed opportunity. Small, functional, and largely overlooked, they sit front and centre of your driving view every single day. This two-piece steering wheel button trim addresses that gap with precision. Crafted in polished chrome and finished with Swarovski-style crystals, each piece slots over your existing steering wheel controls to create a jewelled surround that reads as factory-fitted. Available in both silver and gold to complement whichever interior palette your vehicle carries — from Ivory to Ebony, or Autobiography dark-themed builds that suit the warmer gold tone beautifully. Installation requires no tools, no adhesives beyond the pre-applied tape already bonded to the trim, and no expertise beyond a clean cloth and sixty seconds of your time. For owners who want the interior to feel as considered as the exterior, this is one of the simplest and most impactful upgrades available for the 2014–2017 generation. What's Included 💎 Steering Wheel Trim Set Two-piece chrome surround with crystal detailing 🔧 Pre-Applied Adhesive Tape Factory-bonded to each piece for clean, tool-free fitting 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Polished chrome construction with premium Swarovski-style crystal detailing Available in silver and gold to match any L405 or L494 interior scheme Precision-moulded two-piece design for seamless steering wheel integration Pre-applied 3M-grade adhesive tape — no drilling, no tools, no mess Installation completed in under two minutes with zero technical knowledge required Durable chrome finish resistant to everyday contact and UV exposure Crystals are individually set and quality-checked for alignment and brilliance Does not obstruct or interfere with steering wheel button functionality Fully reversible — removes cleanly without leaving marks on original trim Tailored specifically for 2014–2017 steering wheel button cluster geometry Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2018–2021 (facelift) Verify Steering Wheel Range Rover Sport L494 2018–2022 (facelift) Verify Steering Wheel Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Difficulty: Beginner  |  Time: Under 2 Minutes  |  Tools Required: None Park your vehicle safely and turn off the ignition. Allow the steering wheel to cool to room temperature if the cabin has been in direct sunlight. Using a clean microfibre cloth, thoroughly wipe down the steering wheel button surround area to remove all dust, fingerprints, and any polish residue. The surface must be completely clean and dry for optimal adhesion. Carefully peel the backing film from the pre-applied adhesive tape on both trim pieces — avoid touching the adhesive surface. Align the first trim piece over the left-hand button cluster, confirming it sits flush and centred before pressing down firmly for 10–15 seconds. Repeat the process for the right-hand piece, applying firm, even pressure across the full surface once positioned correctly. Allow the adhesive to cure for at least 30 minutes before normal driving — avoid touching or adjusting the trim pieces during this period. ⚠ Important: Do not clean the contact area with silicone-based products or wax prior to fitting — these will compromise adhesion. If removing the trim in future, use dental floss or thin fishing line to gently cut through the adhesive layer from left to right to avoid marking the original steering wheel surface. Elevate Every Mile Small details define the difference between a well-specified Range Rover and one that's been truly personalised. Browse the full collection of interior upgrades for your L405 Vogue or L494 Sport — and use the code below to save on your next two items. Shop L405 Vogue Accessories Shop L494 Sport Accessories Buy any 2 items and save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG — crystals featured are Swarovski-style and are not manufactured by or affiliated with Swarovski AG.

Victorious Automotive · Range Rover & Discovery · Interior Trim Cup Holder Cover Mat Trim for Range Rover Sport, Vogue & Discovery (2005–2013) Stainless steel cup holder mats that replace tired plastic surrounds with a clean, precision-fitted upgrade — tool-free, permanent-looking, instantly effective. L320 · L322 · L319 2005–2013 Stainless Steel Tool-Free Fit Interior Trim Direct Fit Set of 2 No Modification Overview The 2005–2013 Range Rover Sport (L320), Range Rover Vogue (L322), and Discovery 3/4 (L319) were built to an exceptionally high standard — but years of daily use leave their mark on the interior, particularly in high-contact areas like the cup holders. Worn, scratched, or discoloured cup holder surrounds are one of the most common complaints from owners of this generation, and one of the easiest to address. These stainless steel Cup Holder Cover Mat Trims are precision-formed to sit cleanly inside the existing cup holder recesses, covering surface wear and immediately restoring the neat, considered appearance the interior deserves. The brushed stainless finish is understated rather than showy — it complements the factory trim rather than competing with it, which is exactly how an upgrade like this should behave. There's no drilling, no adhesive residue risk to worry about, and no specialist tools required. Each mat locates into position using the cup holder recess itself as a guide, producing a snug, rattle-free result. For any owner who takes pride in keeping their vehicle's interior looking as good as it drives, this is one of the simplest and most satisfying upgrades available. What's Included 🥂 Cup Holder Cover Mats × 2 Stainless steel, precision-formed pair for both cup holders 📄 Fitment Guide Step-by-step instruction card included in packaging Product Highlights Precision-formed stainless steel for exact cup holder fitment on L320, L322, and L319 Brushed finish that complements factory interior trim without overpowering it Covers surface scratches, scuffs, and discolouration on existing cup holder surrounds No tools required — locates securely using the existing recess geometry Rattle-free fitment thanks to snug, contour-matched profile Resistant to temperature cycling, moisture, and everyday drink spills Does not interfere with cup holder function — full drink diameter maintained Reversible upgrade — can be removed without marking the original surface Supplied as a matched pair ensuring consistent appearance across both holders Immediate visual result — full installation takes under five minutes Compatibility Model Code Years Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Vogue L322 2005–2012 Direct Fit Discovery 3 / LR3 L319 2004–2009 Direct Fit Discovery 4 / LR4 L319 2009–2016 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: ⬜⬜⬜⬜⬜ Very Easy  ·  Estimated Time: 3–5 Minutes  ·  Tools Required: None Remove any cups, bottles, or loose items from both cup holders. Wipe the cup holder recesses clean using a dry or lightly damp cloth and allow to dry fully before proceeding. Take one cup holder cover mat and orient it correctly by aligning the profile to the recess geometry — the mats are shaped to guide themselves into position. Lower the mat steadily into the cup holder recess, pressing gently around the perimeter to ensure it sits flush against all edges with no gaps or lifted sections. Repeat for the second cup holder. Both mats should sit level and stable with no movement or flex when light pressure is applied from above. Test by placing a cup or bottle in each holder to confirm full function is maintained and the mat remains in place during use. Note: Confirm your vehicle's model code and production year before ordering. Cup holder dimensions can vary between early and late production runs within the same model year — if you are unsure, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Upgrade Your Interior Today Small details define a well-kept interior. These cup holder trims are the kind of upgrade you notice every single time you get in — and so will anyone else who rides with you. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Window Visors Window Visor Vent Shades for 2014–2023 Range Rover Sport — Rain, Sun & Wind Guard Deflectors Precision-moulded side window deflectors that let you keep the windows cracked in any weather — rain, wind, or glaring sun — without compromising the Sport's refined interior environment. Range Rover Sport L494 2014–2023 High-Grade ABS Plastic No-Drill Fit Rain Deflector Wind Guard Sun Visor ISO 9001 Certified Set of 4 Overview The Range Rover Sport L494 is built for owners who demand performance without compromise — a vehicle equally at home on a motorway cruise as it is navigating demanding terrain. That same standard should extend to every accessory fitted to it. These window visor vent shades are engineered specifically for the L494 Sport's door aperture profile, sitting flush with the roofline and complementing the vehicle's aerodynamic silhouette rather than fighting against it. Crafted from high-impact ABS plastic and formed to match the exact curvature of the Range Rover Sport's door frames, these deflectors create a controlled gap that allows fresh air to circulate inside the cabin even when rain is falling. The result is a noticeably fresher interior environment, reduced fogging on cooler days, and a meaningful reduction in wind buffeting noise when windows are slightly open at speed. Unlike generic universal-fit deflectors that sit awkwardly on the glass and peel away over time, these are tailored to the Sport's door geometry and install via a secure channel-mount system that requires no drilling, no adhesive, and no modification to your vehicle. Once fitted, they present a clean, tinted finish that reads as a factory option — which is precisely the level of detail Range Rover Sport owners expect. What's Included 🪟 Front Left Visor Driver's side, pre-formed to door profile 🪟 Front Right Visor Passenger's side, mirror-matched fit 🪟 Rear Left Visor Rear door, full-length deflector 🪟 Rear Right Visor Rear door, full-length deflector 📋 Fitment Instructions Step-by-step installation guide included Product Highlights Precision-moulded to fit Range Rover Sport L494 door profiles exactly — no gaps, no overhang Deflects rain away from the window opening, keeping cabin dry with windows ajar Reduces wind buffeting noise when driving with windows cracked at motorway speeds Improves interior air circulation without exposing passengers to direct wind or rain No-drill, channel-mount installation — preserves your vehicle's factory door finish High-impact ABS plastic construction resists UV fading, cracking, and warping over time Tinted smoke finish integrates cleanly with the Sport's window line aesthetic ISO 9001 certified production process ensures consistent quality across every unit Helps reduce interior fogging in cooler, damp conditions by allowing controlled ventilation Suitable for both standard and SVR Sport variants across the full 2014–2023 model range Compatibility Vehicle Code Years Fit Range Rover Sport (Standard) L494 2014–2023 Direct Fit Range Rover Sport SVR L494 2015–2023 Direct Fit Range Rover Sport HSE / HST L494 2014–2023 Direct Fit Range Rover Sport SE / Autobiography L494 2014–2023 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2022–2026 Range Rover Sport L461, please visit our New Range Rover Sport L461 collection for compatible accessories. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Clean the door frame channel and window rubber seals on all four doors with a damp cloth. Ensure the surface is completely dry before proceeding. Lower each window fully before beginning fitment. This allows easier access to the door channel and prevents any pressure on the glass during installation. Starting at the front of the door, locate the leading edge of the visor and slide it into the upper door channel. Work gradually from front to rear, pressing the retention clips firmly into position as you go. Once seated, raise the window slowly to check that the visor does not obstruct window travel. The glass should pass smoothly without catching the visor's lower edge. Repeat for all four doors. No adhesive, drilling, or modifications to the door frame are required. ⚠ Note: Verify your exact model year before fitting. Vehicles produced in the 2022–2023 model year should be confirmed as L494 generation — not the newer L461 platform — as door profiles differ. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you fit. Built for the Range Rover Sport. Finished to Match. At Victorious Automotive, every product we list is selected for owners who care about the details. These window visors aren't an afterthought — they're a considered addition to one of the finest SUVs on the road. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque · Interior Accessories Electronic Handbrake Sticker for Range Rover Evoque (2011–2018) – Zinc Alloy Interior Trim Upgrade A precision-crafted zinc alloy overlay that transforms your Evoque's electronic parking brake button into a refined, premium-finish focal point — no tools, no fuss. Range Rover Evoque 2011–2018 Zinc Alloy Interior Trim Electronic Handbrake No-Drill Fit Direct Adhesive 80g Overview The Range Rover Evoque introduced a generation of drivers to compact luxury SUV ownership — a vehicle that pairs genuine Land Rover capability with sharp, design-forward interiors. From the 2011 debut through to the final run of the first-generation Evoque in 2018, owners have always known that the details inside the cabin matter just as much as the badge on the bonnet. This electronic handbrake sticker is a small upgrade that delivers an outsized visual impact. Machined from zinc alloy and finished to a premium standard, it sits directly over your existing electronic parking brake button, replacing the factory plastic surround with something that feels far more intentional. The weight and solidity of zinc alloy gives your fingertips an immediate sense of quality every time you engage or release the brake. It's the kind of detail that Evoque owners who appreciate their cabin notice immediately — and guests notice shortly after. Paired with other interior accents, it contributes to that layered, bespoke look that takes a factory-spec interior to something closer to a true personalisation project. What's Included 🔩 Zinc Alloy Handbrake Sticker 1× premium overlay, pre-finished and ready to fit 🔧 Adhesive Backing Pre-applied for clean, secure placement 📋 Fitting Guide Simple step-by-step placement instructions 📦 Protective Packaging Secured for transit to arrive damage-free Product Highlights Designed specifically for the first-generation Range Rover Evoque (2011–2018) Durable zinc alloy construction — resistant to scratching and daily wear Premium surface finish that complements factory interior trim tones Direct-fit overlay — no drilling, cutting, or modification required Pre-applied adhesive backing for clean, confident placement Lightweight yet substantial — 80g for a premium tactile feel Covers and enhances the factory plastic parking brake surround Reversible installation — removable without damage to OEM components Pairs seamlessly with other Evoque interior trim accessories Arrives fully finished — no polishing or preparation required Compatibility Model Years Variant Fitment Range Rover Evoque (L538) 2011–2018 Pure / Prestige / Dynamic / SE Direct Fit Range Rover Evoque Convertible 2016–2018 HSE Dynamic Direct Fit Range Rover Evoque (L551) 2019–present All Variants Not Compatible Range Rover Sport (L494) 2013–2020 All Variants Not Compatible Range Rover Velar 2018–2022 All Variants Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure the vehicle is parked with the electronic parking brake engaged and the ignition off. Clean the surface of the existing parking brake button surround thoroughly using an isopropyl alcohol wipe or lint-free cloth — remove any dust, grease, or fingerprints. Allow the surface to dry completely before proceeding. Carefully peel the protective film from the adhesive backing on the zinc alloy sticker. Align the overlay precisely over the factory parking brake button, taking care to match the positioning before pressing down. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure a strong bond. Allow the adhesive to cure for at least one hour before regular use. Note: Ensure the electronic parking brake function is not obstructed after fitting. The sticker is a decorative overlay only and must not interfere with the button's operation. If resistance is felt when engaging or releasing the brake after fitting, remove the overlay immediately. Elevate Every Detail of Your Evoque At Victorious Automotive, we believe the interior of your Range Rover deserves the same attention as the exterior. Browse our full range of Evoque accessories and build the cabin you've always wanted — one considered upgrade at a time. Shop All Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious · Porsche · Key Fob Protection Premium Porsche 3-Piece Chrome Silver Remote Key Case Professional-grade fob protection for Porsche 911, Panamera, Macan, and Cayman models. Keep your keyless entry secure in style. Porsche 911 · Panamera · Macan · Cayman Chrome Silver Plastic Construction 3-Piece Set Overview Your Porsche remote fob is one of the most frequently used and vulnerable components of your vehicle. Every pocket, bag, and center console drop risks damage to the sensitive internal electronics. This premium three-piece chrome silver key case provides professional-grade protection without compromising the iconic aesthetic of your Porsche. Engineered from durable plastic with a premium chrome silver finish, each case in this three-piece set offers custom fitment for Porsche's latest and most iconic models—including the 911, Panamera, Macan, and Cayman. The protective design shields your fob from impact, dust, and minor abrasion while maintaining full button accessibility and wireless range. Why it works: Unlike generic key cases, this set is specifically contoured for Porsche remotes, ensuring a precision fit that doesn't add bulk or interfere with your fob's functionality. The chrome silver finish complements any Porsche's interior, and the three-piece quantity gives you options for multiple vehicles or as backup protection. What's Included 🔐 3× Remote Key Cases Chrome silver finish, custom-fit for Porsche fobs ✓ Full Button Access All functions remain responsive and fully operational 🛡️ Impact Protection Absorbs drops and daily wear while protecting electronics Product Highlights Precision-fit design for Porsche 911, Panamera, Macan, and Cayman remotes Premium chrome silver finish matches Porsche interior styling Three-piece set—protect multiple fobs or keep spares Durable plastic construction resists scratches and impact Ultra-slim profile adds minimal bulk to your keychain Full wireless range maintained—no signal interference All buttons remain fully functional and responsive Easy snap-on installation—no tools required Lightweight and pocket-friendly design Lifetime durability for long-term remote protection Compatibility Porsche Model Year Range Fitment 911 2013–2026 Direct Fit Panamera 2013–2026 Direct Fit Macan 2013–2026 Direct Fit Cayman 2013–2026 Direct Fit Installation Notes Assembly & Fit — 2 minutes, no tools Remove your Porsche remote fob from your pocket or keychain. Align the fob with the interior contours of the chrome silver case. Gently press the fob into the case until fully seated and snug. Press all buttons to confirm full responsiveness and accessibility. Your fob is now protected. Repeat for remaining cases if using multiples. Note: This case is designed for Porsche factory remotes only. If you have a third-party or aftermarket fob, verify button layout and dimensions before installation. All buttons must remain fully pressable after fitting. Protect Your Porsche Fob Today Premium key case protection backed by Victorious Automotive's 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS, and TNT. Join 12,300+ verified customers with a 4.9/5-star rating. Add to Cart Use code 22GET20 for 20% off any 2 items 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide Shipping via trusted carriers ✓ 30-Day Money-Back Guarantee ⭐ 4.9/5 Stars from 12,300+ reviews Victorious Automotive is an independent accessory specialist and is not affiliated with Porsche AG, Dr. Ing. h.c. F. Porsche AG, or any official Porsche subsidiary. All product names and logos are trademarks of their respective owners. This product is designed for aftermarket use and compatibility with the models listed above.

Victorious · Porsche · Key Protection Porsche Key Case Cover – Premium Keyless Remote Protection Durable plastic fob case designed to shield your Porsche keyless remote from daily wear, impacts, and environmental damage. Porsche Vehicles Plastic Construction Keyless Remote All Years Fob Protection Overview Your Porsche's keyless remote is a precision instrument that works hard every day—exposed to pockets, drops, moisture, and the wear of daily life. This protective key case cover is engineered to absorb impact and shield your fob's casing and side shell from scratches, scuffs, and accidental damage. Made from robust plastic, this case slides over your existing Porsche remote, providing a discreet yet effective layer of defence without adding significant bulk. The form-fitting design ensures your key remains fully functional while the protective cap guards against the unexpected. Whether you're a daily driver or weekend enthusiast, this essential accessory keeps your fob in showroom condition and helps preserve its resale value. It's the kind of small detail that separates meticulous owners from the rest. What's Included 🔑 Key Case Cover Protective plastic shell for Porsche remote 🛡️ Impact Protection Absorbs shocks and drops ✓ Form-Fit Design Maintains full key functionality 🌍 Worldwide Shipping Fast delivery via DHL, FedEx, UPS, TNT Product Highlights Precision-engineered plastic construction for durability Direct-fit design for Porsche keyless remotes Protective side shell and casing coverage Lightweight and pocket-friendly Resists daily wear and scratches Simple slide-on installation—no tools required Maintains button responsiveness and function Protects against moisture and dust ingress Discreet appearance and low profile Affordable peace of mind for Porsche owners Compatibility Porsche Model Compatibility All Porsche Keyless Remote Models Direct Fit 911, Panamera, Cayenne, Macan, Boxster, Cayman Direct Fit All Production Years Compatible Installation Difficulty Level: Beginner | Time: 2 minutes Remove your Porsche keyless remote from pocket or bag. Position the protective case cover over your fob's main body. Slide gently until the case sits snugly around the casing and side shell. Test all buttons to confirm full functionality and responsive operation. Carry with confidence—your remote is now protected from daily wear. Note: Ensure the case does not obstruct button operation before regular use. If buttons feel stiff, gently reposition the cover for optimal fit. Protect Your Porsche Remote Today Small details matter when it comes to keeping your Porsche in pristine condition. This durable key case cover is an affordable way to preserve your remote's appearance and extend its lifespan. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ Phone support – +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with Porsche AG, Porsche Cars North America, or any official Porsche dealer or manufacturer. All product names and references are used for identification purposes only. Porsche is a registered trademark of Dr. Ing. h.c. F. Porsche AG.

Victorious · Premium Accessories · Key Protection Porsche Soft TPU Car Key Cover – Premium Remote Shell Case Precision-engineered protective key cover in soft-touch TPU for all major Porsche models. Shields against impact, scratches, and daily wear. Porsche Cayenne Porsche Boxster Porsche Panamera Porsche Macan TPU Material Soft Touch Overview Porsche owners understand that attention to detail matters—both mechanically and aesthetically. Your key fob is part of that precision engineering, and it deserves protection that matches the quality of your vehicle. This TPU key cover is engineered to shield your remote from the everyday hazards that compromise appearance and function. Manufactured from premium soft-touch TPU (thermoplastic polyurethane), this shell case wraps your Porsche key fob in a lightweight, flexible layer of protection. The material is engineered for durability: it resists cracking, absorbs minor impacts, and won't yellow or degrade over time like cheaper silicone alternatives. The soft-grip finish feels natural in hand and complements any Porsche interior aesthetic. Compatible across Porsche's modern lineup—Cayenne, Boxster (986/987), Panamera, and Macan—this cover installs without tools in under 60 seconds. Available in five finishes: classic Black, sporty Red, elegant Silver, vibrant Pink, and premium Gold. It's the small detail that protects your key investment while keeping your remote looking showroom-fresh. What's Included 🔐 TPU Key Cover Shell One-piece protective case for your Porsche remote ✓ Tool-Free Installation Slide-on design, no disassembly required 🎨 Five Colour Options Black, Red, Pink, Silver, or Gold finish 📦 Premium Packaging Secure shipping, worldwide delivery Product Highlights Soft-touch TPU construction resists cracking and yellowing Lightweight protection adds minimal bulk to your key Impact-absorbing design guards against drops and knocks Compatible with Cayenne, Boxster, Panamera, and Macan models Precision fit ensures buttons remain fully accessible Five premium colour finishes to match your taste Tool-free, one-piece slide-on installation in seconds Protects against scratches, scuffs, and UV fading Durable material outlasts standard silicone cases Aesthetically refined design complements Porsche styling Compatibility Porsche Model Year Range Status Cayenne (all generations) 2003–Present Direct Fit Boxster 986 1996–2004 Direct Fit Boxster 987 2004–2012 Direct Fit Panamera (all generations) 2009–Present Direct Fit Macan (all generations) 2014–Present Direct Fit 911 (modern) 2012–Present Direct Fit Cayman / Cayman S 2005–Present Direct Fit Installation Notes Installation Difficulty: Beginner | Time: 1–2 minutes Ensure your Porsche key fob is clean and dry Gently separate the two halves of the TPU cover Slide your key fob into the bottom half of the shell Press the top half down firmly until it clicks into place Test button responsiveness—all functions should operate smoothly Done. Your key is now protected Note: This cover is designed for standard Porsche remote keys. If you have a custom or aftermarket key, verify dimensions before purchase. To remove, gently pry the two halves apart—no tools needed. Protect Your Porsche Key Today Your key fob deserves the same precision and protection as your Porsche. This TPU cover is engineered to outlast lesser alternatives whilst maintaining the refined aesthetic you expect. Order now and keep your remote looking pristine. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars · 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Porsche AG, Porsche Cars North America, or any Porsche subsidiary. Porsche is a registered trademark of Dr. Ing. h.c. F. Porsche AG. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility and is sold as an aftermarket accessory only.

Victorious · Detailing · Cleaning Tools Car Auto Brush Dust Collector – Microfibre Detailing Tool Professional-grade microfibre dust removal brush designed to reach every crevice and corner of your vehicle's interior and exterior. Microfibre + PP + Nylon Universal Fit Lightweight Design Deep Cleaning Crevice Access Overview Whether you're maintaining a Land Rover Defender, Range Rover Sport, Discovery, or any premium vehicle, dust and debris accumulate in dashboard crevices, air vents, door panels, and hard-to-reach trim areas. Standard cloths simply push dust around—they don't extract it. This microfibre dust collector is engineered to capture and hold fine particles at the fiber level, leaving surfaces genuinely clean. The brush combines soft microfibre bristles with reinforced PP and nylon construction, giving you the precision of a detailer's tool without the professional-grade price tag. The universal design works on any vehicle interior or exterior. At just 30g, it's lightweight enough for extended use but durable enough for daily detailing routines. Professional detailers have used microfibre technology for years because it works. The fibers are split to a microscopic level, creating millions of tiny hooks that trap dust, oils, and allergens rather than scattering them. Use it dry for quick dust removal or with a light misting of detail spray for deeper cleaning on vents, trim, and panel gaps. What's Included 🧹 Microfibre Dust Brush Main cleaning tool with soft bristles 📦 Protective Packaging Safe storage and transit Product Highlights Microfibre construction captures fine dust at the fiber level PP and nylon core for durability and flex retention Reaches tight crevices, vents, and panel gaps easily Lightweight at 30g—comfortable for extended use Works dry or with detail spray for deeper cleaning Universal fit for all vehicle types and interiors Reduces allergens and airborne particles Safe on soft-touch materials and trim Professional detailer approved method Affordable alternative to electric dust tools Compatibility Vehicle Range Compatibility Range Rover Sport L461 (2022–2026) Direct Fit Range Rover Vogue L460 (2022–2026) Direct Fit Defender L663 (2020–2026) Direct Fit Range Rover Vogue L405 (2013–2020) Direct Fit Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Velar (2018–2022) Direct Fit Discovery 5 (2017–Present) Direct Fit Discovery 4 (2009–2016) Direct Fit Discovery Sport (2015–Present) Direct Fit Range Rover Evoque (All Models) Direct Fit Defender 90/110 (2004–2016) Direct Fit Toyota Land Cruiser LC300 / LC250 Direct Fit Mercedes G-Class (All Models) Direct Fit All Other Vehicles Universal How to Use Dust Removal & Detailing Dry Use: Gently brush across dashboards, air vents, and trim to capture surface dust. The microfibre fibers will trap particles rather than pushing them around. Crevice Work: Use the brush tip to access narrow gaps between panels, door seals, and air vents where standard cloths cannot reach. Wet Cleaning (Optional): Light mist the brush with interior detail spray and work into stubborn grime on soft-touch plastics and leather trim. Regular Maintenance: After each use, gently tap the brush over a waste bin to release captured dust. Rinse with lukewarm water if heavily soiled, then air-dry. Storage: Store in a dry location. The protective packaging keeps the bristles in optimal condition between uses. Tip: Microfibre works best when the bristles are clean and dry. A weekly tap-out or monthly rinse will keep this tool performing like new for years. Keep Your Vehicle Showroom Ready Professional detailing starts with the right tools. This microfibre dust collector is a detailer's staple—affordable, effective, and essential for any owner who takes pride in their Land Rover, Range Rover, or Discovery's interior. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent retailer specializing in Land Rover, Range Rover, Defender, Discovery, and premium vehicle accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Land Rover, Range Rover, Toyota, or Mercedes-Benz. All trademarks and vehicle names are the property of their respective manufacturers. This product is designed for universal automotive use and is compatible with all vehicle types.

Victorious · Car Care · Detailing Auto Care Car Wash Detailing Magic Clay Bar 100g Professional-grade clay bar for streak-free, showroom-finish detailing on any vehicle exterior. Magic Clay Bar 100g Size Universal Fit Paint Decontamination All Vehicles Overview Whether you're maintaining a Range Rover Sport, Defender, Discovery, or Land Cruiser, protecting your vehicle's finish starts with proper surface preparation. This Auto Care Magic Clay Bar removes embedded contaminants—road fallout, industrial particles, tree sap, and brake dust—that washing alone cannot lift from clear coat. The 100g clay bar delivers professional detailer results without the learning curve. Its soft, malleable formula gently glides across paint surfaces, extracting microscopic contaminants while leaving zero scratches or swirls. After clay treatment, your finish will feel silky smooth and reflect light with renewed clarity. Perfect for pre-wax preparation or standalone decontamination, this clay bar is an essential step in any serious vehicle care routine. Available in multiple colors (Blue, Yellow, White, Red), each bar is individually packaged in a protective PP box to maintain integrity during storage and shipping worldwide via DHL, FedEx, UPS, and TNT. What's Included 🧼 Magic Clay Bar 100g professional-grade formula 📦 Protective PP Box Secure packaging for transit 🌍 Worldwide Shipping DHL, FedEx, UPS, TNT 🛡️ 30-Day Guarantee Money-back assurance Product Highlights Removes road contaminants without scratching Safe on all clear coat finishes Creates silky-smooth paint surface Improves wax and sealant adhesion Professional detailer-grade formula Compact 100g size lasts multiple applications Reusable with proper care and storage Available in 4 vibrant color options Simple, mess-free application process Enhanced gloss and clarity results Specifications Specification Details Material Type Magic Clay Bar (synthetic) Weight 100g Dimensions 8cm L × 6cm W × 1cm H Colors Available Blue, Yellow, White, Red Package Type PP protective box Compatibility All vehicles, all clear coats Application Paint decontamination Installation & Application How to Use Your Magic Clay Bar Prepare your vehicle. Wash thoroughly and dry completely. Work in a shaded area to prevent water spots. Knead the clay. Warm the clay in your hands until soft and pliable. Shape into a flat, manageable disc. Apply clay lubricant. Use a dedicated clay bar lubricant or quality car wash soap diluted with water on a 2ft² section of paint. Glide with light pressure. Using straight lines or gentle circular motions, move the clay across the lubricated area. Do not scrub aggressively. Fold and inspect. Fold the clay regularly to expose a clean surface. If it becomes too contaminated or picks up debris, discard and start fresh. Final rinse. Spray the entire vehicle with clean water and dry thoroughly with a microfiber towel. Apply protection. Follow with your preferred wax, sealant, or ceramic coating for lasting protection and gloss. Safety Note: Never use excessive pressure or dry clay on paint. Always use adequate lubrication to prevent marring. Test on a small, inconspicuous area first. Store clay in a cool, clean place between uses. Compatibility Vehicle Type Compatibility Range Rover Sport (L461, L494) Direct Fit Range Rover Vogue (L460, L405) Direct Fit Land Rover Defender (L663, 2004–2016) Direct Fit Land Rover Discovery (3, 4, 5) Direct Fit Range Rover Evoque (L551, L538) Direct Fit Range Rover Velar Direct Fit Land Cruiser (LC250, LC300) Direct Fit Mercedes G-Class Direct Fit Jaecoo J7 Direct Fit All other vehicles Universal Elevate Your Finish Professional detailing begins with clean, contamination-free paint. This Auto Care Magic Clay Bar is a proven step in the finishing process used by specialists worldwide. Add it to your care routine today and experience the difference a properly prepared surface makes. Shop Auto Care Detailing Use code 22GET20 for 20% off any 2 items 4.9/5 Stars 12,300+ Reviews 30-Day Money-Back Worldwide Shipping Victorious Automotive is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar Land Rover, Toyota, or Mercedes-Benz. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is compatible with vehicles from these brands but is independently designed and distributed by Victorious Automotive.

Victorious Automotive · Universal Fit · Detailing & Cleaning Alloy Wheel Scrub Brush Professional-grade cleaning brush engineered to restore alloy wheels to showroom finish without damage. Universal Fit Plastic Construction 25cm Length Professional Grade Lightweight Overview Whether you're maintaining a Range Rover Sport L461, Defender L663, Discovery 5, or any premium 4x4, keeping alloy wheels pristine is non-negotiable. Road grime, brake dust, and mineral deposits accumulate quickly, dulling the finish of your wheels and undermining the overall appearance of your vehicle. A dedicated wheel cleaning brush isn't just a convenience—it's essential maintenance. The Alloy Wheel Scrub Brush is purpose-built for precision wheel care. Its ergonomic design and strategically angled bristles reach into spoke crevices and around callipers where standard sponges fail. The plastic construction is safe for clearcoated alloys, protecting your investment while delivering thorough, streak-free results. At just 50g and 25cm long, it's compact enough to live in your cleaning kit year-round. This brush transforms wheel cleaning from a tedious chore into a controlled, efficient process. Pair it with your preferred wheel cleaner, work methodically around each wheel, and watch brake dust and grime dissolve. The difference in your vehicle's presentation is immediate and dramatic. What's Included 🪥 Scrub Brush 25cm length, angled bristles Product Highlights Engineered for alloy wheel cleaning without scratching 25cm length reaches deep into spoke geometry Durable plastic bristles handle tough brake dust Lightweight 50g design—easy to control and handle 6.5cm width fits comfortably in hand for extended use Works with all wheel cleaner formulations Compact storage—fits in wheel cleaning kits and car bags Safe for clearcoated, polished, and matte finishes Precision-angled head for caliper and lug access Professional detailing standard at automotive workshops globally Compatibility Vehicle Series Code / Year Fit Status Range Rover Sport L461 (2022–2026) Direct Fit Range Rover Vogue L460 (2022–2026) Direct Fit Defender L663 (2020–2026) Direct Fit Range Rover Velar 2018–2022 Direct Fit Discovery 5 2017–Present Direct Fit Range Rover Evoque L551 / L538 Direct Fit Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Vogue L405 (2013–2020) Direct Fit Land Cruiser LC300 / LC250 Direct Fit Mercedes G-Class G-Wagon All Years Direct Fit All Other 4x4s Universal Direct Fit Installation & Usage Wheel Cleaning Process Rinse wheels thoroughly with water to loosen surface dirt and dust. Apply your preferred alloy wheel cleaner according to product instructions; allow dwell time if recommended. Using the scrub brush, work methodically around each wheel, paying attention to spoke recesses and brake calliper areas. Use controlled circular motions; avoid excessive pressure that could damage finish. Rinse completely with clean water; repeat for stubborn brake dust buildup. Dry with microfiber towels to prevent water spotting and mineral residue. Store in a dry location between uses; rinse brush thoroughly after each use. Note: Always test wheel cleaner on an inconspicuous area first. Avoid using on unprotected bare metal or unpainted alloys without professional guidance. This brush is not suitable for damaged or flaking finishes—consult a specialist first. Keep Your Alloys Pristine Wheels are the first thing people notice. With the Alloy Wheel Scrub Brush in your detailing arsenal, maintaining that showroom shine becomes effortless—every wash, every season, every mile. Shop Wheel Care Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, or Mercedes-Benz. All vehicle names and model designations are registered trademarks of their respective manufacturers. This product is designed for universal fitment and is compatible with vehicles listed herein. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover L405 / L494 · Interior Upgrades Aluminum Paddle Shifters for Steering Wheel – Range Rover 2014–2021 Motorsport-inspired aluminum paddle shifters engineered for a direct-fit installation on Range Rover steering wheels — delivering sharper gear control with a premium, factory-finish look. Range Rover L405 Range Rover Sport L494 2014–2021 Aluminum Direct Fit No Drilling Interior Upgrade Adhesive Install Overview The Range Rover Vogue L405 and Range Rover Sport L494 are vehicles that reward attention to detail — from the way they ride to the way they feel in your hands. The stock steering wheel already sets a high standard, but for owners who want a more tactile, driver-focused connection to their ZF gearbox, the paddle shifters are the natural next step. These aluminum paddle shifters are precision-cut and shaped to complement the profile of Range Rover steering wheels from 2014 through 2021. The matte-finished aluminum construction replicates the kind of hardware you'd find in performance variants costing significantly more — adding genuine presence without altering the factory aesthetic. Whether you're overtaking on a motorway or descending a mountain pass, having manual shift control directly at your fingertips makes the driving experience considerably more engaged. Installation requires no tools, no drilling, and no modification to the steering column. A pre-applied industrial-grade adhesive bonds securely to the back of the existing paddle housing. It's a sub-two-minute fit that looks as though it left the factory that way. For owners who care about both form and function, this is one of the most cost-effective interior upgrades available for this generation of Range Rover. What's Included 🔧 Left Paddle Shifter Downshift — aluminum construction, pre-fitted adhesive pad 🔧 Right Paddle Shifter Upshift — mirror profile, matched finish 📋 Installation Guide Step-by-step instructions with surface prep guidance 🧹 Cleaning Wipe Pre-application surface preparation cloth Product Highlights Precision-cut aluminum body for a robust, premium feel in hand Designed to match the exact curve and profile of Range Rover steering wheels Industrial-grade pre-applied adhesive for a permanent, rattle-free bond No drilling, no wiring, no tools required for installation Compatible with both L405 Vogue and L494 Sport steering wheels (2014–2021) Matte aluminum finish complements both dark and light interior colour schemes Adds genuine manual shift functionality to your ZF automatic gearbox Low-profile design maintains airbag clearance and steering wheel ergonomics Upgrade completed in under 2 minutes with no specialist knowledge required Sold as a matched pair — left and right paddles included Compatibility Vehicle Code Year Range Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Velar L560 2018–2022 Direct Fit Range Rover Evoque L538 2014–2019 Direct Fit Range Rover Sport L461 2022–2026 Verify Fitment Range Rover Vogue L460 2022–2026 Verify Fitment Defender L663 2020–2026 Not Compatible Not sure about your specific build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes ⏱ Difficulty: Easy  |  Time: Under 2 Minutes  |  Tools Required: None Ensure your steering wheel is positioned at the 12 o'clock neutral centre before beginning installation. Use the included cleaning wipe to thoroughly degrease the surface area at the rear of both existing paddle housings. Allow to dry for 30 seconds. Peel the protective backing from the pre-applied adhesive pad on the rear of the left paddle shifter. Align the left (downshift) paddle over the existing housing and press firmly for 10–15 seconds, applying even pressure across the full surface. Repeat the process for the right (upshift) paddle shifter. Allow the adhesive to cure for a minimum of 30 minutes before use for optimal bond strength. ⚠ Surface Preparation is Critical: Any oil, dust, or residue on the paddle housing surface will significantly reduce adhesive performance. Do not skip the cleaning step. Avoid installation in temperatures below 10°C as this can impair initial adhesion. Shop by Vehicle Looking for more interior upgrades for your specific model? Browse our dedicated collections below: 🚙 Range Rover Vogue L405 2013–2020 accessories 🚙 Range Rover Sport L494 2013–2020 accessories 🚙 Land Rover Discovery 5 L462 accessories 🚙 Range Rover Velar 2018–2022 accessories Upgrade Your Range Rover Interior Today Free worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee and trusted by over 12,300 verified customers with a 4.9/5 rating. Shop Range Rover Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Mercedes · Exterior Styling Painted ABS Rear Bumper Splitter Spoilers – Mercedes W176 A-Class Aggressive rear styling meets durable ABS protection—direct fit for 2013–2016 Mercedes A200, A250, and A45 AMG. W176 2013–2016 ABS Plastic Pre-Painted Splitter DIY Install Overview These painted ABS rear bumper splitter spoilers are engineered specifically for the W176 Mercedes-Benz A-Class (2013–2016), delivering a purposeful aggressive stance to your hatchback's rear profile. Compatible with the A200, A250, and A45 AMG variants, they bolt directly to your factory bumper without modification. Crafted from impact-resistant ABS plastic and supplied pre-painted in vibrant red or classic black, these splitters elevate your A-Class with rally-inspired design while offering genuine protection against minor impacts and road debris. The lightweight construction (549g) means zero impact on handling or fuel economy. Installation is straightforward for enthusiasts—adhesive tape and bolt points mean you can complete the job in under an hour. Whether you're building an AMG-spec look or adding visual presence to your daily driver, these splitters deliver genuine impact without compromise. What's Included 🎨 Painted Splitter Pair Pre-finished in red or black 📌 Installation Tape Pre-applied for quick fit 📖 Fitting Guide Step-by-step instructions Product Highlights Direct-fit design for W176 A-Class (2013–2016) Compatible with A200, A250, and A45 AMG Durable ABS construction resists UV and weather Pre-painted in vibrant red or classic black Lightweight (549g per pair) Enhanced rear bumper protection Installation tape and hardware supplied DIY-friendly—no specialist tools required Aggressive rally-inspired aesthetic Bolt and adhesive mounting options Compatibility Guide Model Year Range Compatibility Mercedes-Benz A200 (W176) 2013–2016 Direct Fit Mercedes-Benz A250 (W176) 2013–2016 Direct Fit Mercedes-Benz A45 AMG (W176) 2013–2016 Direct Fit A-Class (W176) 2017+ Not Compatible Other W176 variants 2013–2016 Direct Fit Verify your model year and chassis code (W176) before ordering. Fitment is specific to 2013–2016 A-Class models. Later generations require different splitters. Installation Notes Difficulty: Beginner | Time: 45–60 minutes Clean the rear bumper surface thoroughly with isopropyl alcohol and allow to dry completely. Position the splitter pair on the bumper lower edge, centering left and right. Remove backing from adhesive tape and press firmly into place for 30 seconds each side. Align bolt holes with factory mounting points and hand-tighten bolts (if applicable to your variant). Allow adhesive to cure for 24 hours before driving. Check alignment and tightness after 100 miles. Caution: Do not drive through car washes or high-pressure rinses for 48 hours after installation. Avoid off-road use or aggressive speed bumps until fully cured. Dimensions & Specifications Specification Detail Material ABS Plastic (UV-stabilized) Length 40 cm Width 25 cm Height 11 cm Weight (per pair) 549 g Colors Red, Black (pre-painted) Mounting Adhesive tape + bolt hardware Complete Your A-Class Styling Transform your W176 Mercedes with precision-engineered rear styling. These splitters deliver aggressive presence and protection in one genuine upgrade. Order today and drive with confidence. Shop Now Use code: 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ verified reviews 🌍 Worldwide – DHL, FedEx, UPS, TNT ✓ 30-Day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler AG, or any official Mercedes brand entity. All vehicle names and model designations are used purely for fitment compatibility reference. Product design is original to Victorious and does not infringe any trademark or design patent. Always verify compatibility with your specific vehicle before purchase. Warranty applies to manufacturing defect only and does not cover improper installation, accident damage, or misuse.

Victorious Automotive · Range Rover Vogue L405 · Exterior Trim Front Fog Lamp Decorative Trim in Silver — Range Rover Vogue L405 2018–2020 A precision-cut silver ABS trim surround that sharpens the front bumper aesthetic of the L405 Vogue — six pieces, zero modification, lasting finish. Range Rover Vogue L405 2018–2020 ABS Construction Silver Finish 6-Piece Set Adhesive Fit ISO9001 Certified Model: CY1279 Overview The Range Rover Vogue L405 in its 2018–2020 specification represents the pinnacle of the fourth-generation platform — a vehicle with sculpted lines, purposeful proportions, and a front end that commands attention. The fog lamp clusters sit prominently within the lower bumper, and for owners who want that area to carry the same considered detail as the rest of the vehicle, standard plastic surrounds simply don't do it justice. These Silver Front Fog Lamp Decorative Trims are engineered specifically for the L405 Vogue facelift. Each of the six pieces is formed from high-grade ABS — the same class of thermoplastic used throughout premium automotive trim manufacturing — finished in a clean, satin silver that integrates naturally with both the standard chrome pack and the contrast black styling options. The result is a front end that reads sharper, more resolved, and more intentional. Installation requires no tools, no drilling, and no permanent modification. Each trim is pre-cut to the exact contour of the fog lamp recess and secured via industrial-grade adhesive tape that bonds firmly to the painted bumper surface. Whether you're refreshing a daily driver or preparing a vehicle for resale, this is the kind of detail that makes the difference. What's Included 🔲 Silver Fog Lamp Trim Pieces 6 pieces — full set for both fog lamp clusters 🔧 Pre-Applied Adhesive Backing Industrial-grade tape pre-applied to each piece 📋 Installation Guidance Step-by-step fitment instructions included 📦 Protective Packaging Each piece individually wrapped for transit safety Product Highlights Custom-profiled for the L405 Vogue 2018–2020 fog lamp recess — no trimming or modification required High-grade ABS construction resists UV degradation, temperature cycling, and road vibration Satin silver finish complements chrome, gloss black, and contrast trim specifications 6-piece complete set covers both fog lamp surrounds in a single purchase Industrial adhesive backing provides a permanent, rattle-free bond to the bumper surface No drilling, no wiring, no professional fitting — clean DIY installation in under 30 minutes Adds a layer of surface protection to the fog lamp surround against minor stone chips ISO9001 certified manufacturing process ensures consistent quality across every unit Lightweight ABS adds negligible weight — no impact on bumper function or aerodynamics Reversible fitment — trims can be removed cleanly without damage to the original paintwork Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 Facelift 2018–2020 Direct Fit Range Rover Vogue L405 Pre-Facelift 2013–2017 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If your vehicle is not listed or you are unsure of your build date, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔩 Tools Required: None Park your Range Rover Vogue on a flat surface and allow the front bumper to cool to ambient temperature if the vehicle has recently been driven. Thoroughly clean the fog lamp surround area with an isopropyl alcohol wipe or panel wipe solution. Remove all traces of wax, polish, grease, and road contamination. Allow to dry fully — at least 5 minutes. Dry-fit each trim piece to the fog lamp recess without removing the adhesive liner. Confirm the profile sits flush and the contours align correctly before committing. Starting with one side, peel back the adhesive liner from the first trim piece. Align carefully to the fog lamp surround, beginning at one edge and pressing progressively across the surface to avoid air pockets. Apply firm, even pressure across the entire face of each piece for 30–60 seconds to fully activate the adhesive bond. Repeat for all remaining pieces. Allow 24 hours before washing the vehicle to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation in temperatures below 10°C (50°F) — cold temperatures significantly reduce initial adhesive tack and can result in premature lifting. For best results, install indoors or in direct sunlight on a warm day. Upgrade Your L405 Vogue Today Browse the full Victorious range of exterior trim, styling, and protection accessories engineered for the Range Rover Vogue L405 — every piece chosen and tested by enthusiasts who own and drive these vehicles. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle build before purchase.

Victorious Automotive · Range Rover Sport L494 · Interior Accessories Carbon Fiber Gear Shift Knob Cover for Range Rover Sport 2014–2017 (L494) A precision-fit, gloss carbon fiber effect gear shift cover that instantly elevates the interior of your Range Rover Sport L494 — installed in under two minutes, no tools required. Range Rover Sport L494 2014–2017 Carbon Fiber Effect ABS Plastic Gloss Finish Interior Upgrade No-Drill Fit Sporty Feel Overview The Range Rover Sport L494 (2014–2017) is a vehicle that commands presence — both on road and off. Its interior is designed to reflect that character, but for many owners, the standard gear shift knob feels like a missed opportunity. It's functional, yes, but it doesn't quite match the level of sporting intent that the rest of the cabin aspires to. This carbon fiber effect gear shift knob cover is designed specifically for the L494 Sport — engineered to slip over the existing shifter and lock into place without modification. The gloss carbon finish is rendered in high-quality ABS plastic with a tactile TPU outer layer, delivering a noticeably thicker, more substantial grip that transforms an everyday interaction — every gear change — into something that feels genuinely premium. It's a small upgrade by any measure, but one that punches well above its size. If you're incrementally refining your interior — matching carbon trim on the centre console, steering wheel accents, or door surrounds — this cover ties the whole story together at the shifter. Clean, purposeful, and built to complement rather than clash. What's Included ⚙️ Gear Shift Knob Cover 1x carbon fiber effect ABS cover with gloss finish 📄 Fitting Guide Basic installation instructions included Product Highlights Precision-designed for Range Rover Sport L494 (2014–2017) — direct fit, no modification needed Gloss carbon fiber effect finish delivers a high-end aesthetic that complements OEM interior trim High-quality ABS plastic construction — rigid, durable, and resistant to daily wear TPU outer layer is soft to the touch, adding grip and comfort with every gear change Thicker shifter profile promotes a more engaged, sporty driving feel Tool-free installation — clips securely over the existing knob in under 2 minutes No drilling, no adhesives, no permanent changes to the vehicle's interior Ideal companion to other carbon effect trim upgrades across the L494 cabin Shipped worldwide via DHL, FedEx, UPS, and TNT — tracked and insured Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Model Code Year Range Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2018–2022 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure your vehicle is parked with the engine off and the gear selector in Park (P). Clean the existing gear shift knob with a dry or slightly damp microfibre cloth to remove any dust or oils. Align the carbon fiber cover with the top of the gear shift knob, ensuring the orientation is correct and any logos or seams face rearward. Apply gentle, even pressure downward until the cover clicks or seats firmly over the knob — no tools or adhesive required. Test for any movement or rotation. If the cover feels loose, apply light additional pressure to ensure a full, secure seat. Note: This cover is designed to fit over the factory gear shift knob of the Range Rover Sport L494 (2014–2017). If your vehicle has an aftermarket or replacement shifter, fitment cannot be guaranteed. Please contact us before ordering if you are unsure of your vehicle's specification. Upgrade Your L494 Interior Today Browse our full collection of Range Rover Sport L494 accessories — from carbon trim kits to protective accessories — all curated for owners who refuse to settle. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. This product is an aftermarket accessory and does not carry OEM or JLR approval.

Victorious Automotive · Range Rover Sport L494 & Jaguar F-Type · Interior Trim Carbon Fiber Gear Shift Knob Overlay for 2018–2020 Range Rover Sport & Jaguar F-Type A precision-fit carbon fiber effect gear shift knob overlay that elevates the tactile and visual quality of your centre console — installed in under two minutes, no tools required. Range Rover Sport L494 Jaguar F-Type 2018–2020 Carbon Fiber Effect ABS + Carbon Overlay Gloss Finish Tool-Free Fit Interior Trim Overview The 2018–2020 Range Rover Sport L494 is a vehicle that commands attention both on and off road — its interior should reflect that same standard. While the factory gear shifter is well-engineered, the standard knob finish can feel understated for owners who demand a more driver-focused, performance-oriented cabin aesthetic. This carbon fiber overlay addresses that directly. Crafted from high-quality ABS plastic with a carbon fiber effect surface and gloss topcoat, this gear shift knob overlay slips cleanly over your existing shifter head to deliver an immediate visual and tactile upgrade. The added girth of the overlay provides a more substantial, purposeful grip — the kind of feel you'd expect from a factory sport specification or bespoke interior package. Equally at home in the Jaguar F-Type cabin, this overlay shares compatibility across both platforms, making it one of the more versatile trim upgrades available at this price point. Whether you're refreshing a daily driver or building out a fully bespoke interior, this is a clean, no-compromise starting point. What's Included ⬛ Carbon Fiber Shift Knob Overlay 1x unit — gloss carbon effect ABS finish 📋 Fitment Instructions Simple step-by-step guide included Product Highlights Striking carbon fiber effect surface with high-gloss lacquer topcoat Precision-moulded to fit Range Rover Sport L494 and Jaguar F-Type shifter heads Tool-free installation — clips securely into place in under 2 minutes Adds tactile depth and a more substantial grip diameter to the shifter Premium soft-touch feel — a noticeable step up from the factory finish Lightweight construction — no added load or mechanical interference Resists everyday wear, UV exposure, and interior heat Complements other carbon interior trim upgrades seamlessly Reversible fit — removes cleanly with no adhesive or damage to OEM parts Compatible with both petrol and diesel transmission variants Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2018–2020 Direct Fit Jaguar F-Type X152 2018–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: Under 2 Minutes  ·  🛠 Tools Required: None Ensure your vehicle is parked, engine off, and the gear selector is in the neutral or park position. Clean the existing gear shift knob head with a dry microfibre cloth to remove any dust, oils, or residue. Align the carbon fiber overlay with the top of the shift knob, noting the orientation so any logos or lines run correctly. Apply firm, even pressure downward from the top of the overlay until you feel it click or seat securely around the knob. Check all edges are flush and the overlay sits evenly with no gaps. The fit should feel solid with no rattle or movement. ⚠ Please Note: Always confirm your exact model year and shifter variant before purchasing. Some facelift or pre-facelift variants within the 2018–2020 production window may have minor differences in knob geometry. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Interior the Right Way Every detail matters inside a Range Rover Sport. This carbon fiber shift knob overlay is a small change that delivers an outsized impact — the kind of refinement that owners notice every single drive. Backed by our 30-day money-back guarantee and 4.9-star rating from over 12,300 verified customers. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx & UPS 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Victorious.shop · +44 203 943 9919

Victorious Automotive · Range Rover L405 / Velar · Interior Trim Upgrades Range Rover 2017–2020 Central Air Conditioning Control Knob Trim Rings Upgrade Precision-machined chrome trim rings that wrap your climate and audio knobs in genuine luxury — fitted in under two minutes, no tools required. L405 Vogue SE L494 Sport L560 Velar 2017–2020 Chrome Finish Silver & Gold Options Tool-Free Fit Interior Trim Under 2 Minutes Direct Fit Overview The 2017–2020 Range Rover lineup — spanning the flagship Vogue SE L405, the driver-focused Sport L494, and the design-forward Velar — represents a generation defined by refined restraint. These vehicles were engineered with an interior philosophy that prioritises tactile quality and visual calm. Every surface detail matters, and the central climate control cluster sits directly in the driver's sightline throughout every journey. These knob trim rings are precision-engineered to sit flush over your existing air conditioning and audio volume controls, transforming a functional element into a deliberate style statement. Available in Silver and Gold chrome finishes, they add a jewellery-like quality to the centre console — echoing the premium detailing found in higher-specification factory configurations. The heavyweight chrome construction gives each ring a satisfying presence that matches the OEM standard you expect from a Range Rover interior. What separates this upgrade from decorative add-ons is how naturally it integrates. There are no adhesive residues to worry about, no drilling, and no modification to existing components. The result is an interior that looks considered and elevated, not customised — exactly how it should feel in a vehicle of this calibre. What's Included 💨 AC Control Knob Trim Rings Full set for central climate control dials 🔊 Audio Volume Knob Trim Ring Matching ring for the audio/media volume dial ✨ Chrome Finish (Silver or Gold) Selected at checkout — both available 📋 Fitting Guide Simple step-by-step installation reference Product Highlights Precision-fit design engineered for 2017–2020 Range Rover climate and audio knobs Available in Silver and Gold chrome — both finishes complement OEM interior tones Heavyweight chrome construction for a premium, substantial feel Tool-free installation completed in under two minutes No adhesives, no drilling, no damage to existing controls Covers AC control knobs and audio volume dial in a matching set Elevates the centre console to a higher-spec visual standard Durable chrome surface resists daily wear, fingerprints, and UV fading Direct fitment — no cutting or modification of factory components required Replicates the jewellery-like detailing of top-tier luxury specification interiors Compatibility Model Code Year Range Fit Range Rover Vogue SE L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Velar L560 2017–2018 Direct Fit Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Sport L461 L461 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure your vehicle is parked with the ignition off and the interior at room temperature for best fitment. Remove each trim ring from its packaging and identify the correct ring for each knob position — AC control versus audio volume. Align the trim ring centrally over your existing knob, ensuring the inner diameter seats flush around the base of the dial. Apply gentle, even pressure until the ring clicks or sits firmly in position. No adhesive is required — the rings are retention-fit. Repeat for each remaining knob and step back to confirm even alignment across the console. Test each dial to confirm full rotational movement is retained without restriction from the trim rings. ⚠ Note: Confirm your vehicle's climate control knob style before ordering. Some regional specification variants or late-facelift 2020 models may feature updated knob profiles. If you are unsure, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility before you purchase. Upgrade Your Interior the Right Way Small details define great interiors. These knob trim rings are the kind of upgrade that Range Rover owners notice every time they sit in the driver's seat — understated, purposeful, and exactly right. Shop Range Rover L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Evoque · Interior Trim Range Rover Evoque Volume Control Rotary Knob Covers – Aluminium Alloy Audio Trim Upgrade A precision-machined aluminium alloy cover set that transforms the look of your Evoque's audio volume and control knobs — available in Silver, Black, Red, and Blue. Range Rover Evoque 2013–2018 Aluminium Alloy Interior Trim Volume Control Knobs 4 Colour Options No-Tool Install OEM Fitment Overview The Range Rover Evoque has always punched above its weight in the design stakes — a compact SUV with a genuinely premium cabin identity. But like any vehicle with a few years on the clock, small interior details can start to look tired. The factory plastic rotary knobs around the audio and climate control area are a prime candidate for a subtle but meaningful refresh. These Volume Control Rotary Knob Covers are precision-formed from high-quality aluminium alloy and designed to sit directly over your existing Evoque knobs, instantly elevating the tactile and visual quality of one of the most frequently touched areas of your interior. Choose from Silver, Black, Red, or Blue finishes to complement your cabin trim or introduce a bold personalised accent. At approximately 1 inch in diameter, these covers are sized specifically for Evoque audio control applications and use a secure adhesive bond that keeps them firmly in place without permanent modification. The result is a factory-clean finish that looks intentional, not aftermarket. What's Included 🎛️ Rotary Knob Covers Set of aluminium alloy audio control covers 🔧 Pre-Applied Adhesive Glue-type bond, no tools required 📋 Installation Guide Simple step-by-step fitting instructions 🎨 Choice of Finish Silver, Black, Red or Blue variants Product Highlights Precision-formed high-quality aluminium alloy construction Available in Silver, Black, Red and Blue finishes Designed specifically for Range Rover Evoque audio controls Secure adhesive bond — no drilling or permanent modification Fits 2013, 2014, 2015, 2016, 2017 and 2018 Evoque models Approximately 1 inch diameter — precise OEM-spec sizing Internal cabin placement for a clean, factory-integrated look Tactile improvement over standard factory plastic knobs Quick installation — typically under 10 minutes Ideal complement to other interior trim upgrades Compatibility Vehicle Years Fitment Range Rover Evoque (L538) 2013–2018 Direct Fit Range Rover Evoque (L551 — 2019+) 2019–present Not Confirmed Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure the existing rotary knobs are clean, dry and free from dust, oils or residue. Use an isopropyl alcohol wipe for best adhesion. Select your desired colour finish cover and remove the protective backing from the pre-applied adhesive. Carefully align the cover over the existing factory rotary knob, ensuring it is centred and level before pressing down. Apply firm, even pressure to the cover for 30–60 seconds to activate the adhesive bond fully. Allow a minimum of 1 hour before use to allow the adhesive to cure and bond securely to the knob surface. Note: Ensure the vehicle interior is at room temperature before installation. Fitting in cold conditions can reduce initial adhesive performance. Avoid using solvents or harsh cleaners on the covers once installed. Elevate Every Detail of Your Evoque The smallest upgrades often make the most lasting impression. These aluminium rotary knob covers are the kind of finish-focused detail that Evoque owners who care about their cabin will notice every single drive. Shop More Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle names, model codes, and trademarks remain the property of their respective owners and are referenced solely for the purpose of fitment identification.

Victorious Automotive · Range Rover L322 · Interior Trim Climate Control & Audio Dial Trim Upgrade for Range Rover L322 (2002–2012) Precision-machined aluminium alloy dial covers that transform the look of your Range Rover L322's climate and audio controls — fitted in under two minutes, no tools required. Range Rover L322 2002–2012 Aluminium Alloy Interior Trim Climate Control Audio Dial Covers Tool-Free Fit Red · Silver · Blue Overview The Range Rover L322 — produced from 2002 through to the 2012 model year — carries one of Land Rover's most enduring and recognisable interiors. The sweeping centre console, dual-zone climate controls and audio dial cluster remain functional and well-considered, but years of use can leave the original plastic surrounds looking worn, faded, or simply underwhelming compared to the commanding presence the vehicle still projects on the road. These climate control and audio dial trim covers are engineered specifically for the L322's dial arrangement and snap cleanly over the existing controls without modification or disassembly. Constructed from solid aluminium alloy, they introduce a premium, weighted feel to every interaction with your dashboard — whether adjusting cabin temperature on a cold morning or reaching for the volume. The finish options — Red, Silver, and Blue — allow you to tailor the accent to your interior's existing tone, whether that's warm Tan leather, dark Ebony, or something in between. This is one of the most cost-effective interior upgrades available for the L322 generation. The transformation is immediate, tactile and — once installed — surprisingly hard to go back from. If you spend time in your Range Rover, small details like these matter more than most people expect. What's Included 🎛️ Climate Control Dial Covers Full set for temperature and fan speed dials 🔊 Audio Dial Trim Covers Designed for the L322 head unit dial cluster 📦 Protective Packaging Secure transit packaging to prevent surface damage 📋 Fitting Reference Guided installation support via video Product Highlights Precision-fit design for Range Rover L322 dial layout (2002–2012) Solid aluminium alloy construction — substantial, premium feel in hand Tool-free installation — clip-on fitment in under 2 minutes Available in Red, Silver and Blue to complement any interior colour Instantly refreshes aged or worn dashboard controls Anodised finish resists scratching, fingerprints and daily wear Retains full dial functionality — no interference with operation Direct replacement over factory plastic — no drilling or adhesives Compatible with Vogue, HSE, Autobiography and Sport variants of L322 Worldwide shipping via DHL, FedEx, UPS and TNT Compatibility Vehicle Code Years Trim / Grade Fitment Range Rover Vogue L322 2002–2012 Vogue, HSE, Autobiography Direct Fit Range Rover Sport L320 2005–2013 All Grades Verify Before Order Range Rover Vogue L405 2013–2020 All Grades Not Compatible Range Rover Sport L494 2013–2020 All Grades Not Compatible Land Rover Discovery 3 L319 2004–2009 All Grades Verify Before Order Land Rover Discovery 4 L319 2009–2016 All Grades Verify Before Order Defender L663 2020–2026 All Grades Not Compatible If your vehicle is not listed or you are unsure of compatibility, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Time: Under 2 Minutes  ·  🛠 Tools Required: None Ensure your vehicle is parked and the ignition is off. Allow the interior to reach a comfortable temperature — cold conditions can make clip-on trims slightly stiffer to seat. Identify the climate control and audio dials on your L322's centre console. Clean each dial and the surrounding area with a dry microfibre cloth to remove dust or residue that could affect seating. Align the first trim cover with its corresponding dial, ensuring the orientation matches the dial's directional markings. Press firmly and evenly around the circumference until you feel or hear it click into place. Repeat the process for each remaining dial cover. Once seated, test each dial for full rotational travel and confirm no binding or resistance. Stand back and assess the alignment across all covers — minor adjustments can be made by carefully pulling back a cover and reseating if required. ⚠ Note: Do not force covers onto dials if resistance is felt — recheck alignment before applying pressure. These covers are designed for L322 dial diameters; using on incorrect vehicles may result in poor fitment or dial binding. Watch the Installation Specifications Attribute Detail Material Aluminium Alloy Available Colours Red, Silver, Blue Installation Time Under 2 minutes Tools Required None Fitment Type Direct clip-on — no adhesive or drilling Primary Compatibility Range Rover L322 (2002–2012) Shipping Worldwide — DHL, FedEx, UPS, TNT Guarantee 30-Day Money-Back Guarantee Elevate Every Drive The details you interact with most deserve to reflect the quality of the vehicle around them. Join over 12,300 Land Rover and Range Rover owners who've upgraded their interiors with Victorious Automotive. Shop Range Rover Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL & FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle before ordering.

Victorious Automotive · Range Rover Velar · Interior Storage Central Armrest Storage Box for Range Rover Velar 2017–2018 Keep your Velar's cabin immaculate with a precision-fit ABS storage box that replaces console clutter and protects your lacquered interior surfaces on every journey. Range Rover Velar 2017–2018 ABS Plastic Direct Fit Central Console Interior Moulding ISO 9001 Certified No Drilling 200g Overview The Range Rover Velar was designed with one of the most beautifully minimal interiors in the segment — sweeping surfaces, flush controls, and a jewel-like attention to material quality. It's precisely that refinement that makes loose items on the central console so jarring. Coins, cables, sunglasses, and cards left sitting on lacquered trim can cause hairline scratches that are difficult and costly to remedy. This central armrest storage box is engineered specifically for the 2017–2018 Range Rover Velar, slotting neatly into the centre console area to provide a dedicated, contained space for the everyday essentials you want close at hand. Manufactured from ISO 9001-certified ABS plastic, the unit is lightweight at just 200g, resistant to UV discolouration, and finished to complement the Velar's sophisticated interior aesthetic without drawing attention to itself. Rather than a generic aftermarket tray, this is a model-specific fitment designed around the Velar's geometry. No adhesives, no drilling, and no compromise to the OEM look — it simply drops into place and immediately elevates the functionality of your interior. For Velar owners who demand the same standard of detail from their accessories as Land Rover applies to the vehicle itself, this is the upgrade that makes sense. What's Included 📦 Central Storage Box ABS plastic, model-specific fitment for Velar 2017–2018 📄 Fitting Guide Basic instruction reference included in packaging 🔒 Secure Packaging Protective box to prevent transit damage Product Highlights Precision-engineered fit for Range Rover Velar 2017–2018 centre console High-quality ABS plastic construction — durable and lightweight at 200g ISO 9001 manufacturing certification for consistent quality control Protects original lacquered console surfaces from scratches and scuffs No drilling, no adhesives — clean, reversible installation UV-stable finish resists fading and discolouration over time Discreet, OEM-sympathetic design that complements Velar's interior Keeps everyday items — keys, cards, cables — neatly contained and accessible Ideal for long journeys where organisation and cabin clarity matter Model-specific moulding ensures no movement, rattles, or misalignment Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017–2018 All Trims (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 Post-facelift variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure the centre console area is clean and free from debris before fitting. Remove any loose items from the console surface. Remove the storage box from its protective packaging and inspect for any transit damage before proceeding. Orient the storage box to align with the central console recess, ensuring the moulding faces in the correct direction as per the fitting guide. Gently lower the unit into position, applying light, even pressure to seat it flush with the surrounding trim. No tools, adhesives, or clips are required. Check for stability by applying light pressure to each corner. The unit should sit firmly with no movement or rattle. Wipe down with a soft cloth if needed and begin using immediately. Note: This product is designed exclusively for the 2017–2018 Range Rover Velar. If you are unsure of your vehicle's exact model year or console specification, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Do not force the unit into position — if significant resistance is felt, recheck orientation before proceeding. Elevate Your Velar's Interior The smallest details define the driving experience in a Range Rover Velar. This storage box is a simple, considered upgrade that protects your surfaces and keeps your cabin exactly as it should be — clean, ordered, and premium. Explore the full Velar accessories collection at Victorious Automotive. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover L405 / L494 / Discovery · Interior Upgrades Range Rover 2013–2023 SV Autobiography Style Gear Shifter Selector Upgrade Elevate your centre console instantly — a factory-precise, heavy-duty metal gear shifter trim that brings SV Autobiography presence to your Range Rover or Discovery interior without a trip to the dealer. L405 Vogue 2013–2020 L494 Sport 2013–2020 Discovery 4 & 5 2013–2023 Heavy-Duty Metal SV Autobiography Style Silver / Black / Red 5-Min Install No Tools Required Direct Fit Overview The Range Rover L405 Vogue, L494 Sport, and Land Rover Discovery models produced between 2013 and 2023 share one of the most admired interior architectures in the SUV world — but even in SE and HSE trim, the standard gear shifter selector trim can look underwhelming when placed alongside the extraordinary cabin detailing found in the flagship SV Autobiography specification. For owners who expect every detail to match their vision of what a Range Rover should be, that gap matters. This SV Autobiography style gear shifter selector upgrade is precision-engineered to replace the factory selector trim with a component that looks and feels as though it left the production line on one of JLR's most exclusive builds. Constructed from high-strength metal with exacting tolerances, it presents a commanding, weighted aesthetic that sits perfectly in harmony with leather, piano black, and wood veneer finishes across these model generations. Available in Silver, Black, and Red — each finish chosen to complement the most popular Range Rover and Discovery interior colour palettes. Installation requires no special tools and takes under five minutes, making this one of the most impactful interior upgrades available per minute of effort invested. Whether you're refreshing a daily driver or completing a full interior transformation, this single component delivers an immediate, noticeable change that owners consistently describe as long overdue. What's Included 🎛️ SV Autobiography Style Gear Shift Selector Trim One unit — heavy-duty metal construction, precision cut 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Replicates the SV Autobiography gear selector aesthetic at a fraction of the cost Heavy-duty metal construction for a premium, solid feel in hand Available in Silver, Black, and Red to suit your interior colour scheme Precision cut for a factory-flush, gap-free fitment Installs in under 5 minutes with no special tools required Direct clip-fit replacement — no drilling, cutting, or adhesives needed Compatible across a broad 2013–2023 model range including L405, L494, and Discovery variants Weighted metal feel enhances every gear selection interaction Pairs seamlessly with other Victorious interior upgrade components Arrives fully finished — no additional prep, painting, or assembly required Compatibility Vehicle Code Years Fitment Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Land Rover Discovery 4 L319 2013–2016 Direct Fit Land Rover Discovery 5 L462 2017–2023 Direct Fit Range Rover Velar L560 2018–2023 Verify Before Purchase Range Rover Evoque L538 / L551 2013–2023 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes ⏱ Estimated Time: 5 Minutes  |  🔧 Difficulty: Easy  |  🛠 Tools Required: None Ensure your vehicle is stationary, ignition off, and the gear selector is in the Park (P) position. Grip the existing gear shifter selector trim firmly and apply gentle upward pressure to disengage the factory clips — no tools are required at this stage. Lift the original trim clear of the selector assembly and set it aside in a safe location. Align the new SV Autobiography style trim over the selector base, ensuring the orientation matches the factory position. Press the new trim down firmly and evenly until all clips engage with a clear, audible click — confirming a secure, flush fit. Cycle through the gear positions to confirm smooth, unobstructed movement and verify fitment before driving. ⚠ Important: Always confirm full compatibility with your specific vehicle variant, trim level, and model year before fitting. If your interior features a bespoke or SVAutobiography factory spec, minor differences in the selector assembly may affect fitment. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installing. Shop the Full Range Rover Interior Collection This gear shifter upgrade is just one piece of a complete interior transformation. Explore our full collection of premium interior components for Range Rover L405, L494, and Land Rover Discovery — hand-selected for owners who refuse to compromise on detail. Shop Range Rover Vogue L405 → Shop Range Rover Sport L494 → Shop Land Rover Discovery 5 → Buying two or more items? Save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, Range Rover, or any of their subsidiaries. All brand names, model names, and vehicle codes referenced on this page are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover & Jaguar · Key Accessories Metallic Jaguar & Land Rover Key Cover — Premium TPU Key Fob Protector A precision-fit metallic TPU key cover engineered to shield your Land Rover or Jaguar key fob from peeling, cracking, drops, and daily wear — available in six bold finishes. Land Rover Jaguar Discovery Soft TPU Metallic Finish 6 Colours Key Fob Protection Direct Fit Overview Land Rover and Jaguar key fobs share a well-documented weakness: the outer plastic shell is prone to peeling, cracking, and splitting over time — often starting at the edges where the key is gripped most frequently. For owners who take pride in every detail of their vehicle, a deteriorating key fob is an unwelcome eyesore that's entirely preventable. This Metallic Key Cover has been designed to slip precisely over your existing Land Rover or Jaguar key fob, creating a durable second skin that absorbs daily shocks, repels spills, and eliminates the plastic peel problem entirely. Crafted from high-quality soft TPU, it conforms to the original key shape without adding unnecessary bulk, keeping button travel crisp and signal transmission completely uninterrupted. Available in six premium metallic finishes — Blue, Gold, Pink, Silver, Black, and Red — the cover lets you personalise your key to match your vehicle's colour, contrast it boldly, or simply keep it clean and classic. It's the small upgrade that gets noticed every time you reach for your keys. What's Included 🔑 TPU Key Fob Cover One cover in your chosen metallic finish ✨ Metallic Finish Coating Pre-applied premium metallic surface treatment 📦 Protective Packaging Delivered securely to avoid transit damage 📋 Fitting Guide Simple step-by-step fitment instructions included Product Highlights Prevents the common Land Rover & Jaguar key plastic peel and split issue Premium soft TPU construction — flexible, durable, and impact-resistant Six metallic colour options: Blue, Gold, Pink, Silver, Black, Red Precision-moulded for a direct, snug fit over your original key fob Maintains full button functionality — no loss of press sensitivity Does not interfere with key signal or remote locking range Protects against drops, scratches, spills, and everyday wear Adds a personalised, premium aesthetic to your key fob Slim profile — no added bulk in pocket or bag No tools required — clips on and off in seconds Compatibility Vehicle Model / Code Years Fit Land Rover Discovery 3 L319 2004–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2024 Direct Fit Land Rover Discovery Sport L550 2015–2024 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Velar L560 2017–2022 Direct Fit Jaguar F-Pace / E-Pace / XE / XF Various 2015–2022 Direct Fit Land Rover Defender L663 (2020+) 2020–2024 Check Key Type Range Rover L460 / Sport L461 New Generation 2022–2026 Check Key Type ⚠ The L663 Defender and new-generation L460/L461 models use a revised key fob profile. Please verify your key shape matches before ordering. Contact us at +44 203 943 9919 if unsure. Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 minutes  ·  Tools Required: None Remove your Land Rover or Jaguar key fob from any existing case or cover. Clean the surface of the key fob with a soft dry cloth to remove dust and oils. Align the TPU cover with the key fob, matching the button cutouts to the correct positions. Press the cover firmly around the edges of the key fob until it clicks snugly into place on all sides. Test all buttons to confirm full functionality and check that the cover sits flush with no lifting at the edges. Note: Ensure all button apertures are correctly aligned before fully pressing the cover into place. Misalignment may restrict button travel. The cover is designed to be removable — simply flex the TPU gently at one corner and peel back to remove. Protect Your Key. Elevate Every Detail. Your Land Rover or Jaguar deserves precision care from the ignition key outward. This metallic TPU cover is the simplest, most affordable way to stop the plastic peel problem before it starts — and look exceptional doing it. Shop All Discovery Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Jaguar, or any of their subsidiaries. All vehicle names, model codes, and brand references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

BMW · 1 Series · Key Protection BMW Aluminium Gold Smart Remote Key Cover Case – 1 Series 2017–2020 Premium aluminium alloy protection with sophisticated gold finish for your BMW smart key fob. BMW 1 Series 2017–2020 Aluminium Alloy Gold Finish Smart Remote Compatible Overview The BMW 1 Series 2017–2020 deserves accessories that match its refined engineering and design language. Your smart key fob is constantly in your pocket, on tables, and at risk of daily wear—scratches, scuffs, and impact damage accumulate quickly on plastic surfaces. This Aluminium Gold Smart Remote Key Cover Case transforms your key into a durable, visually stunning accessory. Precision-engineered from premium aluminium alloy, it delivers lightweight protection without bulk. The luxe gold finish adds sophistication to every interaction with your vehicle, elevating the tactile experience of ownership. Installation is straightforward, requiring only the included screwdriver. Protective padding ensures your key's internals stay secure, whilst the precision fit maintains full access to all buttons and functions. It's the small detail that signals you care about your BMW. What's Included 🔑 Aluminium Gold Key Cover Precision-fitted case with full button access 🔗 Keychain with Fastening Loop Secure attachment to your keyring 🔧 Installation Screwdriver Everything needed for tool-free setup 🛡️ Protective Pads Set Interior cushioning prevents internal damage Product Highlights Premium aluminium alloy construction—lightweight yet exceptionally durable Sophisticated gold finish adds luxury aesthetic to your daily interactions Precision-fitted for BMW 1 Series smart key fobs with perfect button access Protective interior padding guards against internal component damage Corrosion-resistant materials extend product lifespan Minimal bulk—maintains pocket-friendly form factor Tool-included installation takes under two minutes Reversible design—easily remove for key service or battery changes Complementary gold finish pairs with most BMW interiors 30-day money-back guarantee—risk-free investment Compatibility BMW Model Year Range Fitment 1 Series (3-Door) 2017–2020 Direct Fit 1 Series (5-Door) 2017–2020 Direct Fit 1 Series M Sport 2017–2020 Direct Fit Pre-2017 1 Series Models 2007–2016 Not Compatible Post-2020 1 Series (F40) 2021+ Not Compatible Always verify your vehicle's build date and smart key fob model before ordering. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation Notes ⏱️ Installation Time: 2 Minutes | Difficulty: Beginner Power off your BMW smart key (no batteries to remove—this is a passive case). Using the included screwdriver, carefully separate the case halves by locating the seam. Place protective pads inside both halves, positioning them around the button areas. Gently insert your smart key fob into the bottom half of the aluminium case. Align the top half and secure with the screws—hand-tight is sufficient. Attach the keychain loop to your keyring for secure daily carry. Test all buttons to ensure full functionality before regular use. ⚠️ Note: Do not over-tighten screws. The precision fit requires only gentle pressure to close. Over-tightening may damage the case or restrict button operation. Invest in Your BMW's Details Your key fob is the first touchpoint with your vehicle every single day. Protect it with materials worthy of your BMW's engineering—and enjoy the subtle luxury of a gold-finished accessory that reflects your attention to quality. Add to Cart Apply code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars – 12,300+ Reviews ✓ 30-Day Guarantee – Money Back ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ UK Support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent automotive accessory specialist and is not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke, or any official BMW entity. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket use only.

Victorious Automotive · Land Rover Discovery 5 & Range Rover 2018 · Key Protection Aluminium Alloy Key Cover – Range Rover 2018 & Discovery 5 A precision-machined aluminium shell that shields your Range Rover or Discovery 5 key fob from cracks, peeling, and everyday damage — fitted in seconds, built to last. Discovery 5 L462 Range Rover 2018 Aluminium Alloy Screw-Fit 6 Colours Worldwide Shipping 30-Day Guarantee No Tools Required Why Your Key Fob Needs Protection Land Rover and Range Rover key fobs are a known weak point across the model range. The OEM plastic casing is prone to cracking, peeling, and splitting over time — a frustratingly common problem that owners of the Discovery 5 and 2018 Range Rover family encounter long before their vehicles show any signs of wear. The internal electronics are left exposed the moment the casing compromises, which can mean costly dealer repairs or a full key replacement. This aluminium alloy key cover from Victorious Automotive is engineered specifically to address that vulnerability. Machined from lightweight yet extremely durable aluminium, it wraps around your existing key fob shell with a tight, secure fit — forming an armour-like outer casing that absorbs impact, repels moisture, and prevents the plastic beneath from ever splitting in the first place. Unlike silicone slip-on cases that add bulk and slip off under pressure, this cover screws directly onto the key body in seconds. It sits flush, feels premium in hand, and adds virtually no weight. Available in six finishes to complement your vehicle — from stealth black to brushed silver and bold gold — it's the kind of detail that Discovery 5 and Range Rover owners appreciate immediately. What's Included 🔑 Aluminium Key Cover Shell Precision-machined alloy casing, full fob wrap 🔩 Securing Screws Included hardware for a tight, rattle-free fit 🪛 Mini Screwdriver Everything you need, straight out of the box 📦 Protective Gift Box Presented neatly — ideal as a gift for any LR owner Product Highlights Precision-machined lightweight aluminium alloy construction Prevents OEM plastic peeling and cracking at the source Screws directly onto key fob — zero adhesives or guesswork Protects key electronics from moisture, drops, and impact Available in 6 finishes: Black, Silver, Gold, Blue, Pink, Red No signal interference — full remote and keyless function retained Adds minimal weight and virtually no extra bulk to the key Durable enough to outlast multiple key fob battery cycles Fits neatly in pocket or bag — no snagging or added thickness Designed specifically for the 2018 Range Rover key profile Compatibility Vehicle Year Range Key Type Fit Land Rover Discovery 5 (L462) 2017–2022 Smart Key Fob Direct Fit Range Rover Vogue (L405) 2018+ 2018–2020 Smart Key Fob Direct Fit Range Rover Sport (L494) 2018+ 2018–2020 Smart Key Fob Direct Fit Range Rover Velar 2018–2022 Smart Key Fob Direct Fit Range Rover Evoque (L538) 2018+ 2018–2019 Smart Key Fob Direct Fit Range Rover Evoque (L551) 2019–2024 Updated Key Profile Verify Before Order Range Rover Vogue (L460) 2022–2026 New Generation Key Not Compatible Range Rover Sport (L461) 2022–2026 New Generation Key Not Compatible Land Rover Defender (L663) 2020–2026 New Generation Key Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Time: Under 3 Minutes  |  🔧 Tools: Included Remove your existing key from any keyring or lanyard and place it on a clean, flat surface. Align the aluminium cover shell around the front face of your key fob, ensuring the button cutouts are correctly oriented. Press the rear cover plate firmly into position so both halves sit flush against each other with no gaps. Use the included mini screwdriver to tighten the securing screws — do not overtighten, hand-firm is sufficient. Test all buttons and the emergency blade key operation before returning to use. ⚠ Note: Ensure your key fob is clean and dry before fitting the cover. Any grit or moisture trapped under the shell may cause minor cosmetic wear over time. If your key's plastic casing is already cracked or peeling, this cover will prevent further deterioration but will not repair existing damage. Protect Your Key. Protect Your Investment. For Discovery 5 and Range Rover owners who refuse to compromise on the details — this is the upgrade your key fob deserves from day one. Browse the full range of Land Rover Discovery 5 accessories at Victorious Automotive. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious · BMW M · Keyrings & Accessories BMW M Chrome Keyring with Leather Belt – Premium Car Accessory Elevate your BMW with this sophisticated leather and chrome keyring—engineered for enthusiasts who demand both style and durability. BMW M Series 2015–2024 Premium Leather Chrome Accents Compact Design Overview Purpose-built for BMW M devotees, this leather belt chrome keyring combines German engineering aesthetics with refined practicality. Whether you're an M340i, M440i, M550i, or M760i owner, this accessory reflects your passion for the marque while keeping your keys secure and stylish. Crafted from premium full-grain leather with polished chrome detailing, the keyring delivers a premium tactile experience every time you engage it. Its compact 13cm profile fits effortlessly into pockets, jacket sleeves, or attached to your BMW keyfob without bulk. The stitching is precise, the material supple yet resilient—built to age gracefully like a fine watch. This is more than a key holder. It's a statement piece for those who understand that even the smallest details define the ownership experience. Lightweight yet substantial, it pairs flawlessly with BMW's minimalist interior philosophy and stands up to daily wear across all climates thanks to premium leather conditioning. What's Included 🔑 Leather Belt Keyring Premium full-grain leather with chrome ring ✓ Polished Chrome Hardware Corrosion-resistant finish for longevity Product Highlights Full-grain leather construction with superior durability and patina development Polished chrome accents for a refined, premium appearance Lightweight yet sturdy design—35g total weight for everyday carry Compact dimensions: 13cm length, 2cm width, 1.7cm diameter Fits all BMW M models (2015–2024 and compatible generations) Hand-finished stitching for enhanced strength and aesthetics Resists wear, moisture, and daily handling stress Timeless design that complements any BMW interior aesthetic Easy attachment to keyfobs or belt loops for flexible use Backed by 30-day money-back guarantee for complete peace of mind Compatibility BMW Model Year Range Compatibility M340i / M440i 2021–2024 Direct Fit M550i / M560i 2018–2024 Direct Fit M760i 2020–2024 Direct Fit M235i / M240i 2014–2023 Direct Fit M335i / M340i 2012–2019 Direct Fit M440i xDrive 2017–2021 Direct Fit All Other BMW Models Any Year Universal Fit Installation & Use Getting Started Unbox the keyring and inspect the leather and chrome components for quality assurance. Attach the chrome ring to your BMW keyfob using the supplied attachment loop. Alternatively, loop the leather belt through a belt carrier or pocket for standalone use. Condition the leather with a premium leather balm once monthly to maintain suppleness and patina. Keep away from extreme heat sources and allow natural air drying if exposed to moisture. Tip: The leather will develop a unique patina over time. This is natural aging and adds character—avoid over-polishing to preserve authenticity. Own Your Passion Every detail counts when you're a BMW enthusiast. This leather chrome keyring isn't just functional—it's a daily reminder of why you chose a marque that refuses compromise. Premium materials, timeless design, and built for the long drive ahead. Shop Now Use code 22GET20 for 20% off when you purchase 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🚚 Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back Guarantee 📞 Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory retailer. This product is not affiliated with, endorsed by, or manufactured by BMW AG, BMW M GmbH, or Jaguar Land Rover Limited. All vehicle names, logos, and references are used for compatibility identification only. BMW, BMW M, and all related marks are registered trademarks of their respective owners.

Victorious Automotive · Range Rover & Discovery · Interior Trim SVO Autobiography Style Armrest Adjuster Knobs for Range Rover Sport, Vogue & Discovery (2005–2022) Precision-machined chrome metal armrest adjustment knobs in the SVO Autobiography style — a direct-fit upgrade that brings a noticeably more premium feel to your interior in under five minutes. L320 · L322 · L494 · L405 · L319 2005–2022 Chrome Metal SVO Autobiography Style Direct Fit Laser Cut Pair Included 5-Min Install Interior Upgrade Overview The Range Rover Sport, Vogue, and Discovery have always carried a reputation for refined interior quality — but for owners of models built between 2005 and 2022, the original armrest adjustment knobs are one of those small details that quietly undermine the premium experience. Plastic, basic in form, and prone to showing wear, they're a detail most owners notice but rarely think to address. These SVO Autobiography Style Armrest Adjusters are purpose-built to resolve exactly that. Machined from metal and finished in a polished chrome, they replicate the elevated aesthetic of Land Rover's in-house SVO (Special Vehicle Operations) Autobiography specification — bringing a tactile, upmarket quality to a component you interact with every single journey. The precision laser-cut patterning adds visual depth and grip, making them as functional as they are refined. Installation is genuinely tool-free and takes under five minutes. The knobs thread directly onto the existing adjuster stems as an exact replacement — no modifications, no adhesives, no guesswork. For owners who care about every detail of their cabin, this is the kind of upgrade that rewards close attention. What's Included 🔩 Armrest Adjuster Knobs × 2 One pair — left and right seat fitment 📄 Fitment Guide Basic installation reference included Product Highlights Durable metal construction for long-lasting wear resistance Polished chrome finish matching Autobiography interior hardware Precision laser-cut patterning for grip and visual detail Direct replacement for factory plastic knobs — no modifications needed Installs in under 5 minutes with no tools required SVO Autobiography style design for a factory-spec premium look Sold as a pair — covers both driver and passenger armrests Compatible across a wide 2005–2022 model year range Adds tactile quality to one of the cabin's most-touched components A subtle upgrade with a disproportionately high visual impact Compatibility Model Code Years Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L322 2005–2012 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Discovery L319 (Disco 4) 2009–2016 Direct Fit Discovery L462 (Disco 5) 2017–2022 Direct Fit Range Rover Sport L461 2022–2026 Verify Before Purchase Range Rover Vogue L460 2022–2026 Verify Before Purchase Range Rover Velar L560 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5 Minutes  ·  Tools Required: None Locate the existing armrest adjustment knobs on both driver and passenger seats — typically positioned at the rear base of each armrest. Grip the factory knob firmly and rotate counter-clockwise to unscrew it from the adjuster stem. It should release with minimal resistance. Clean the exposed stem with a dry cloth to remove any dust or residue before fitting the new knob. Thread the new SVO Autobiography Style knob clockwise onto the stem, tightening by hand until secure and flush against the armrest base. Repeat for the second seat. Test the adjustment mechanism to confirm smooth, full operation before use. ⚠ Compatibility Note: These knobs are designed to thread onto specific OEM adjuster stems. Stem diameter and thread pitch can vary between model years and trim levels. Please compare the existing knob thread to the product specifications or contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) to confirm fitment before ordering. The Detail That Sets Your Interior Apart It's often the smallest changes that define a truly well-kept cabin. These SVO Autobiography Style Armrest Adjusters are a quiet, considered upgrade — the kind that other Range Rover owners notice immediately. Order today and ship worldwide via DHL, FedEx, UPS, or TNT. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes. SVO and Autobiography are registered trademarks of Jaguar Land Rover. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim SVO Autobiography Black Start/Stop Switch Surround for Land Rover Range Rover 2013–2023 A factory-grade SVO Autobiography Black engine start button surround that elevates your Range Rover's cabin with an OEM-matched, precision-cut finish — fitted in under two minutes, no tools required. L405 2013–2020 L494 2013–2020 SVO Autobiography Black Start/Stop Switch Surround Precision Laser Cut Self-Adhesive Fit Interior Trim Upgrade No Tools Required Overview The Range Rover Vogue L405 and Range Rover Sport L494 — produced from 2013 through to 2023 — represent the pinnacle of British luxury SUV design. Every interior surface is considered, and owners who choose these vehicles care deeply about the quality and cohesion of what surrounds them inside the cabin. Even the smallest details, like the engine start button surround, contribute to the overall sense of craftsmanship. This SVO Autobiography Black Start/Stop Switch Surround is engineered specifically to complement the premium aesthetic of the Range Rover interior. Modelled after Land Rover's own SVO Autobiography Black specification, it delivers a refined, darkened finish that contrasts beautifully against lighter interior trims or sits seamlessly within an all-black cabin environment. The result is a cleaner, more purposeful look around one of the most-touched components in your vehicle. Designed for a direct, clip-and-press installation, this surround uses pre-applied 3M-grade self-adhesive tape to bond securely to the existing start button housing — no drilling, no modification, and no risk to your interior. It's the kind of upgrade that looks like it came from the factory, because it was designed with exactly that standard in mind. What's Included 🔲 Start/Stop Switch Surround SVO Autobiography Black finish, precision laser cut 🔧 Pre-Applied Adhesive Tape 3M-grade, factory-bonded to rear surface 📄 Installation Guide Step-by-step instructions included 🛡️ Protective Packaging Secured for safe international transit Product Highlights SVO Autobiography Black specification finish for a factory-matched look Precision laser cut for exact fitment around the OEM start/stop button Pre-applied 3M-grade adhesive tape — no tools or fixings required Installs in under 2 minutes with no interior disassembly needed No drilling, cutting, or permanent modification to your vehicle Durable high-grade material resistant to heat, UV, and daily wear Direct fit for Range Rover Vogue L405 and Range Rover Sport L494 Covers the 2013–2023 model year span across both platforms Adds a premium darkened accent to one of the cabin's focal points Designed and quality-checked to meet OEM visual standards Compatibility Model Code Years Fitment Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  ·  🛠 Difficulty: Easy — No Tools Required Ensure the area around your existing start/stop button surround is clean and free of dust, grease, or moisture. A dry microfibre cloth works well. Remove the protective film from the pre-applied adhesive tape on the rear of the new surround. Carefully align the surround over the OEM start/stop button housing, ensuring all edges are flush before making contact. Apply firm, even pressure across the entire surround for 10–15 seconds to activate the adhesive bond. Avoid touching or stressing the surround for at least 30 minutes after installation to allow the adhesive to fully cure. ⚠ Note: Do not attempt installation immediately after washing your vehicle or in very cold temperatures below 10°C, as this may reduce initial adhesion. For best results, install at room temperature with a clean, dry surface. Upgrade Your Range Rover Interior Today Join over 12,300 Range Rover and Land Rover owners who trust Victorious Automotive for premium interior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.