Key Covers

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Side Door Audio Speaker Cover for Land Rover Discovery Sport 2015–2019 A precision-fit interior trim upgrade that brings a refined silver finish to your Discovery Sport's door speaker surrounds — no drilling, no fuss, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Direct Adhesive Fit Interior Trim Speaker Cover No Drilling Required Overview The Land Rover Discovery Sport (L550) occupies a unique position — practical enough for the school run, capable enough for a weekend trail, and refined enough to demand an interior that keeps up. From 2015 onwards, the Discovery Sport's cabin set a strong benchmark in its class, but like any vehicle, the small details are where character is either earned or lost. These ABS silver side door audio speaker covers are designed to replace the standard dark plastic surrounds on your Discovery Sport's door-mounted speakers, introducing a clean silver and black contrast that elevates the entire door card aesthetic. The result is an interior that looks intentionally specced — the kind of detail that owners notice, and passengers remark on. Constructed from high-grade ABS thermoplastic, these covers are engineered for the interior environment — resistant to heat, UV exposure from cabin light, and the daily wear that comes with an actively used vehicle. Installation requires no specialist tools and no permanent modification, making this one of the most satisfying upgrades you can make in under an hour. What's Included 🔊 Speaker Cover Set 1 complete set covering all relevant door speaker surrounds 🔧 Pre-Applied Adhesive Strong double-sided tape pre-fitted for clean, tool-free installation 📋 Installation Guide Step-by-step fitting instructions included in the package 🛡️ Protective Packaging Individually wrapped to prevent transit scratching Product Highlights High-grade ABS plastic construction — durable and cabin-safe in temperature extremes Silver and black dual-tone finish adds a premium, purposeful aesthetic to your door cards Precision-moulded for the Discovery Sport L550 door speaker surround geometry Pre-applied double-sided adhesive for a clean, tool-free installation Covers fit flush against the door card surface — no gaps, no movement Scratch and UV resistant surface coating maintains appearance long-term Does not obstruct or affect speaker acoustic performance in any way Reversible fitment — can be removed without damage to original trim Compatible with all Discovery Sport trims from 2015 to 2019 model years Consistent finish across all door positions for a factory-integrated look Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020 – 2024 Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 20–40 minutes  |  🔩 Tools Required: None Begin with a clean, dry interior. Use an IPA-based panel wipe or isopropyl alcohol cloth to thoroughly degrease the speaker surround area on each door card — this is the single most important step for adhesion longevity. Allow the cleaned surfaces to dry fully for at least 5 minutes before proceeding. Do not rush this step, particularly in cold or humid conditions. Dry-fit each cover piece against its corresponding speaker surround before removing the adhesive backing. Confirm alignment and orientation without committing. Peel the protective film from the pre-applied double-sided adhesive tape on the rear of the cover piece. Position the cover carefully against the speaker surround — starting from one edge and working across to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface of the cover for 30–60 seconds per piece to ensure full adhesive contact. Allow 24 hours for the adhesive to cure fully before subjecting the covers to any stress or cleaning. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F), as adhesive performance is significantly reduced in cold conditions. If fitting in winter, allow the vehicle to warm up to cabin temperature before beginning. Avoid contact with cleaning products containing silicone or wax on the bonded area for at least 48 hours post-installation. Complete Your Discovery Sport Interior Browse our full collection of Land Rover Discovery Sport interior and exterior accessories — curated for owners who take pride in every detail of their vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Center Console Navigation Frame Button Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-fit silver ABS trim panel that frames the center console navigation controls of your Discovery Sport, instantly elevating the interior's visual detail with a clean, factory-complementary finish. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish No-Drill Install Double-Sided Adhesive 2-Piece Set Interior Upgrade Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that balances everyday practicality with genuine character — and its interior reflects that. The centre console area, housing the navigation controls and surrounding button cluster, is one of the most visually prominent zones in the cabin. Over time, the stock plastic surround can look flat or worn, particularly against an otherwise refined interior. This silver ABS Navigation Frame Button Cover Trim is engineered specifically for the Discovery Sport's 2015–2019 centre console layout. Precision-cut to follow the exact contours of the button surround, each piece sits flush against the factory trim with no gaps, no rocking, and no proud edges. The silver finish introduces a subtle metallic quality that catches ambient light without being ostentatious — the kind of detail that looks considered rather than aftermarket. Made from high-grade ABS plastic, the trim is resistant to UV yellowing, temperature cycling, and the daily wear that comes from frequent contact. Installation requires no tools, no drilling, and no modification to the original panels — just a clean surface and a confident press. It's one of the most impactful low-effort interior upgrades available for the Discovery Sport at this model year range. What's Included 🪟 Navigation Frame Trim Panel × 2 Left and right centre console button surround covers, silver ABS finish 🔲 Pre-Applied Adhesive Backing Double-sided 3M-style tape pre-fitted to each panel for immediate installation 📋 Installation Guide Step-by-step fitting reference included with the set Product Highlights Precision-cut ABS panels designed specifically for the Discovery Sport 2015–2019 console layout Silver finish complements both light and dark interior colour schemes without clashing High-grade ABS construction — resistant to heat, UV fading, and surface wear Pre-applied double-sided adhesive for a confident, tool-free installation Flush-fit profile sits level with factory trim for a factory-integrated appearance 2-piece set covers the full navigation frame button surround area Lightweight panels add no perceptible weight or bulk to the console area 100% brand new — individually inspected before dispatch Reversible upgrade — can be cleanly removed without damaging OEM trim Worldwide shipping via DHL, FedEx, UPS, and TNT with tracked delivery Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Land Rover Freelander 2 L359 2006 – 2014 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–20 minutes  |  🔧 Tools Required: None Start with the engine off and the interior at room temperature. Ensure the centre console area is clean, dry, and free of any dust, oils, or residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit both trim panels onto the navigation frame button surround before removing the adhesive backing. Confirm the alignment and fit are correct before committing. Peel the protective liner from the pre-applied adhesive on the back of the first panel. Take care not to touch the adhesive surface. Carefully position the panel against the console surround, starting from one edge. Press firmly and evenly across the full surface for 20–30 seconds to activate the adhesive bond. Repeat the process for the second panel, ensuring both pieces align symmetrically across the console. Allow the adhesive to fully cure for a minimum of 2–4 hours before applying any pressure or cleaning products to the trim area. ⚠ Note: Do not install in cold conditions below 10°C — adhesive performance is significantly reduced at low temperatures. Ensure the OEM trim surface is fully dry before application. If removal is ever required, use a plastic trim removal tool and apply gentle, even pressure to avoid marking the original panel. Upgrade Your Discovery Sport Interior Explore the full range of Land Rover Discovery Sport interior accessories at Victorious Automotive — curated for owners who take their vehicles seriously. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle trim level and build date before purchase.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Centre Console Cup Holder Frame Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-cut silver ABS trim ring that brings a clean, refined finish to the Discovery Sport's centre console cup holder area — no tools, no mess, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Direct Fit No-Tool Install Interior Trim Centre Console Overview The Land Rover Discovery Sport L550 delivered genuine family-SUV versatility with a cabin that punched above its segment — but over time, the centre console trim can begin to show its age. The cup holder surround, subject to daily contact and constant wear, is often one of the first areas to look tired. This ABS silver frame cover trim is designed to address exactly that, slipping over the existing cup holder recess to instantly refresh the look of the console. Manufactured from high-grade ABS thermoplastic and finished in a brushed silver tone, the trim is engineered to sit flush against the factory contours of the 2015–2019 Discovery Sport centre console. The result is a seamless, factory-like appearance that elevates the interior without any permanent modification. The silver finish works particularly well alongside the Discovery Sport's original chrome and piano black interior accents, creating a coherent, upscale aesthetic. Installation requires no specialist tools and no prior experience. The trim ships with a pre-applied adhesive backing that bonds firmly to the existing console surface — simply clean, peel, and press into place. It's the kind of detail-driven upgrade that Discovery Sport owners who care about their interior will immediately notice and appreciate. What's Included 🪟 Cup Holder Frame Cover Trim 1 × silver ABS centre console trim ring 🔧 Adhesive Backing Pre-applied double-sided tape for secure fitment 📋 Fitment Guidance Basic installation instructions included Product Highlights Precision-moulded ABS construction for long-term durability and shape retention Silver finish complements factory chrome and piano black interior elements Pre-applied double-sided adhesive for a secure, rattle-free bond Custom-profile design ensures flush, gap-free fitment to the console No drilling, cutting, or specialist tools required for installation Resistant to everyday wear, UV exposure, and temperature variation 100% brand new — not a used or refurbished component Lightweight construction adds no perceptible weight to the console area Reversible upgrade — can be removed without damage to factory trim Immediately refreshes the appearance of a high-contact interior zone Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020 – 2024 Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature — cold conditions can reduce adhesive performance. Allow the car to warm naturally if stored in a cold environment. Thoroughly clean the cup holder surround area using an isopropyl alcohol wipe or similar solvent-based cleaner. Remove all dust, oils, and residue from the surface. Allow to dry completely before proceeding. Test-fit the trim ring over the cup holder recess without removing the adhesive backing. Confirm the profile sits flush with no lifting or gaps around the perimeter. Peel the protective backing from the double-sided adhesive tape. Carefully align the trim ring over the cup holder and press firmly from the centre outward, applying even pressure for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before exposing the trim to heat, liquids, or heavy contact for best long-term adhesion. ⚠ Note: Ensure the contact surface is completely clean and dry before applying the adhesive. Residual moisture, grease, or cleaning product will significantly reduce bonding strength. If in doubt, re-clean with isopropyl alcohol and allow an additional 10 minutes of drying time. Upgrade Your Discovery Sport Interior Every detail inside your Discovery Sport reflects the standard you hold your vehicle to. Browse the full range of Discovery Sport interior accessories and find the finishing touches your cabin deserves. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Product imagery is representative — minor variations in finish may occur between production batches.

Victorious · Discovery Sport · Interior Trim Navigation Frame Cover Trim for Land Rover Discovery Sport L550 Premium ABS trim ring that refreshes your infotainment surround with a seamless factory-finished look in silver or black. L550 2015–2019 ABS Plastic Silver / Black Adhesive Backed Overview The Land Rover Discovery Sport L550 is a capable compact SUV that balances luxury with practicality. Over time, the factory navigation frame can show wear or fade, detracting from an otherwise immaculate cabin. This Navigation Frame Cover Trim restores visual cohesion to your dashboard with a precision-fitted surround that integrates seamlessly with your existing interior architecture. Manufactured from premium ABS plastic, this trim ring arrives in your choice of Silver or Black to complement your Discovery Sport's color scheme and styling preferences. The durable material resists fading, cracking, and discoloration—essential qualities for a high-touch interior component exposed to UV light and daily use. ISO9001 manufacturing ensures consistent quality across every unit. Installation is straightforward: the cover comes with industrial-strength double-sided adhesive pre-applied, eliminating the need for fasteners, drilling, or adhesives. The entire job takes minutes, leaving no permanent modifications to your vehicle. It's the intelligent choice for owners seeking a quick, reversible interior upgrade. What's Included 📦 Navigation Frame Cover Single precision-cut trim ring, ready to install ✨ Pre-Applied Adhesive Factory-backed 3M double-sided tape for secure fit 🎨 Finish Options Silver or Black—choose your preferred aesthetic 📋 Installation Guide Clear instructions with positioning and technique tips Product Highlights Direct Fit: Engineered for L550 (2015–2019) models; no modification required Premium ABS Material: Durable, UV-resistant, resists fading and cracking Factory Finish: Satin Silver or Gloss Black—matches OEM quality perfectly Adhesive Backed: No drilling, no fasteners—clean installation in minutes ISO9001 Certified: Manufactured to international quality standards Reversible Upgrade: Won't damage original trim when removed with care Seamless Integration: Blends naturally with dashboard layout and design language Cabin Refresh: Instantly modernizes interior without replacing entire components Low-Maintenance: Easy to clean with standard interior detailing products Worldwide Warranty: 30-day money-back guarantee on all Victorious products Compatibility Model Year Range Compatibility Land Rover Discovery Sport 2015 Direct Fit Land Rover Discovery Sport 2016 Direct Fit Land Rover Discovery Sport 2017 Direct Fit Land Rover Discovery Sport 2018 Direct Fit Land Rover Discovery Sport 2019 Direct Fit Land Rover Discovery Sport 2020+ Not Compatible Installation Guide Difficulty: Beginner | Time: 5 minutes Clean the area: Use a microfiber cloth and interior detailing spray to thoroughly clean the existing navigation frame. Remove any dust, residue, or fingerprints. Allow to dry completely. Test fit: Carefully align the cover trim with the navigation frame opening. Check all edges for proper fit—there should be no gaps or overhang. Peel backing: Once satisfied with alignment, slowly peel back the adhesive backing, working from one end to the other (corner-to-corner works best). Apply firmly: Press the cover firmly onto the frame, applying steady pressure across the entire surface for 10–15 seconds to ensure full contact and bonding. Cure time: Allow 24 hours before interacting with the trim to ensure the adhesive reaches full strength. Important: If the vehicle has been in direct sunlight, warm the dashboard slightly with a heat gun (low setting, 6 inches away) to soften the adhesive and improve bonding. Do not force the cover into place—gentle, even pressure ensures the best result and prevents adhesive failure. Ready to Elevate Your Interior? Restore your Discovery Sport's cabin to showroom condition with this premium navigation frame trim. It's a small change that transforms the entire aesthetic. Shop Discovery Sport Trims Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews ✓ 30-Day Guarantee ⚡ DHL/FedEx Worldwide 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product fitment and compatibility are based on original equipment specifications; individual vehicles may vary. Warranty and support are provided exclusively by Victorious Automotive.

Victorious Automotive · Land Rover · Interior Trim Seat Adjustment Button Cover Trim Sticker — Range Rover Sport, Evoque, Discovery Sport & Discovery 5 (2015–2022) Precision-cut ABS seat control cover trims that refresh tired button surrounds across four Land Rover model lines — no drilling, no modification, just a cleaner cabin in minutes. Discovery Sport 2015–2022 Range Rover Sport L494 Range Rover Evoque L538 / L551 Discovery 5 L462 ABS Plastic Silver & Black Options Adhesive Fit No Drilling Interior Upgrade Overview The Land Rover Discovery Sport, Range Rover Sport L494, Range Rover Evoque, and Discovery 5 all share a driver-focused interior philosophy — but over time, the plastic seat adjustment button surrounds around the base of the seat are among the first areas to show wear, scuffs, and fading. These are high-contact zones that are handled daily, and the factory finish simply wasn't built to last the life of the vehicle. These seat adjustment button cover trim stickers are designed as a direct-fit interior enhancement for those exact panels. Engineered from high-grade ABS plastic and finished in either silver or black depending on your variant, each piece is profiled to match the original button layout precisely. The result is a refreshed, uniform appearance that looks factory-correct without requiring any disassembly or specialist tools. Whether you're refreshing a 2015 Discovery Sport with high mileage or simply want to elevate the tactile quality of your Evoque's cabin, these trims bridge the gap between standard specification and a noticeably more premium interior feel. Available in 8-piece and 4-piece kit configurations to suit different seat setups. What's Included 🪑 Seat Button Cover Trims 8-piece or 4-piece kit depending on variant selected 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-fitted to each trim piece 🧽 Cleaning Prep Wipe For surface preparation prior to fitting 📋 Fitment Guide Step-by-step placement reference included Product Highlights Precision-profiled to match OEM seat control button layouts High-grade ABS plastic construction for long-term durability Available in silver and gloss black finish options Pre-applied double-sided adhesive — no tools required Covers scuffs, fading, and wear on original plastic surrounds Fits over existing buttons without affecting functionality Compatible across four Land Rover model lines (2015–2022) 100% brand new — not refurbished or remanufactured Manufactured under strict quality control standards Available in 8-piece and 4-piece kit configurations Compatibility Vehicle Code Years Fitment Land Rover Discovery Sport L550 2015–2022 Direct Fit Land Rover Discovery 5 L462 2017–2022 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Evoque L538 2011–2019 Direct Fit Range Rover Evoque L551 2019–2022 Direct Fit Range Rover Sport L461 2022–2026 Verify Before Purchase Range Rover Vogue L405 2013–2020 Verify Before Purchase Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 15–25 minutes  |  🔧 Tools Required: None Ensure the vehicle interior is at room temperature — cold adhesive bonds less effectively. Allow the car to warm if recently parked outside in cold weather. Use the included prep wipe (or isopropyl alcohol on a lint-free cloth) to thoroughly clean the surface of each existing seat adjustment button surround. Remove any dust, grease, or residue and allow to dry completely. Dry-fit each trim piece over the corresponding button area before committing. Confirm alignment and button cutout registration without peeling the adhesive backing. Peel the protective film from the adhesive backing on the first trim piece. Carefully align to the button surround and press firmly from the centre outward, applying even pressure for 20–30 seconds per piece. Repeat for remaining trim pieces. Avoid pressing or operating the seat adjustment buttons for at least 30 minutes after installation to allow the adhesive to set fully. ⚠ Important: Always confirm your specific seat configuration matches the piece count of your chosen kit (8-piece or 4-piece) before installation. If your buttons differ from the standard layout shown, contact us on +44 203 943 9919 before fitting. Shop By Vehicle Looking for more interior upgrades for your Land Rover? Browse the full accessory collections below: 🚙 Discovery Sport Full accessory range for L550 🚙 Discovery 5 Interior & exterior for L462 🚙 Range Rover Sport L494 Upgrades for 2013–2020 🚙 Range Rover Evoque L538 Accessories for 2011–2019 🚙 Range Rover Evoque L551 Accessories for 2019–2022 🚙 Range Rover Sport L461 New generation 2022–2026 Elevate Every Detail At Victorious Automotive, we believe the interior details matter just as much as the exterior. These seat trim covers are a simple, affordable way to restore the premium feel your Land Rover was built with — and keep it there. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Land Rover Discovery Sport ABS Glove Box Handle Buckle Cover Trim — Carbon Fibre & Silver Finish (2015–2021) A precision-fit interior accent that instantly elevates the glove box area of your Discovery Sport — no cutting, no drilling, just a cleaner, more refined cabin. Discovery Sport L550 2015–2021 ABS Plastic Carbon Fibre Finish Silver Finish Glove Box Trim Interior Upgrade Adhesive Fit ISO9001 Certified Overview The Land Rover Discovery Sport L550 occupies a unique place in the Land Rover lineup — practical enough for the daily commute, capable enough for weekend adventures, and refined enough to satisfy those who expect a premium cabin environment at every touch point. Yet the standard glove box handle area, functional as it is, can feel unremarkable against the rest of the interior — particularly in vehicles that have had years of use. These glove box handle buckle cover trim stickers are designed specifically for the Discovery Sport produced between 2015 and 2021. Manufactured from high-grade ABS plastic with a precisely applied carbon fibre or silver surface finish, each piece is contoured to sit flush against the factory glove box handle surround. The result is a clean, intentional upgrade that looks like it belongs — because the geometry was engineered to fit exactly that area. Installation requires no tools and no modification to your vehicle. Each trim is backed with automotive-grade double-sided adhesive tape, meaning the process takes minutes and leaves no trace if removed. Whether you're refreshing a tired interior or building on an existing customisation theme, this is the kind of considered detail that Discovery Sport owners who care about their cabin will appreciate. What's Included 🧩 Glove Box Handle Buckle Cover Trim 1 piece — pre-cut to fit Discovery Sport L550 🔲 Pre-Applied Adhesive Backing Automotive-grade double-sided tape included 📋 Installation Guide Simple prep and fit instructions included Product Highlights Precision-engineered for Discovery Sport L550 (2015–2021) glove box handle surround High-quality ABS plastic construction — rigid, lightweight, and heat-resistant Available in carbon fibre and silver finishes to suit different interior themes Factory-matched contouring sits flush with no visible gaps or proud edges Pre-applied automotive-grade adhesive — no drilling or permanent fixing required ISO9001 certified manufacturing for consistent quality and dimensional accuracy Scratch-resistant surface finish maintains appearance through regular use Easy DIY installation — no specialist tools or mechanical knowledge required Reversible upgrade — can be removed cleanly without damage to factory trim Pairs naturally with other carbon fibre or silver interior accent upgrades Compatibility Vehicle Year Range Trim / Variant Fitment Land Rover Discovery Sport L550 2015–2021 All Trim Levels (SE, HSE, HSE Luxury, R-Dynamic) Direct Fit Land Rover Discovery Sport L550 2022–Present (Facelift) All Variants Not Confirmed Land Rover Discovery 5 L462 2017–Present All Variants Not Compatible Range Rover Evoque L538 2011–2018 All Variants Not Compatible Range Rover Evoque L551 2019–Present All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Begin with the interior at room temperature. Avoid fitting in cold conditions as adhesive bonding performance is reduced below 15°C. Thoroughly clean the glove box handle surround area using an isopropyl alcohol wipe or equivalent panel prep solution. Remove any dust, grease, or fingerprints and allow to dry completely. Before removing the adhesive backing, dry-fit the trim piece to confirm orientation and alignment. The trim should sit flush with no overhang on either side. Peel back the protective film from the adhesive backing on the trim piece. Take care not to touch the adhesive surface with your fingers. Align the trim carefully over the glove box handle surround and press firmly into place from the centre outward. Apply sustained pressure for 30–60 seconds across the full surface. Allow the adhesive to cure for a minimum of 24 hours before subjecting the trim to heavy use or cleaning. Please Note: Ensure the surface is completely clean and dry before application. Fitting over a dirty or oily surface will compromise adhesive strength and may result in the trim lifting over time. Do not use the glove box aggressively within the first 24 hours of installation. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — from dashboard trim overlays to gear selector surrounds — all selected and quality-checked by the team at Victorious Automotive. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Exterior Protection Rear Bumper Scuff Plate & Sill Guard Trim — Land Rover Discovery Sport (2015–2019) Precision-formed stainless steel protection for your Discovery Sport's rear bumper loading sill — available in silver and black finishes for a factory-integrated look. Discovery Sport L550 2015–2019 Stainless Steel Silver & Black No-Drill Install Rear Bumper Guard Scuff Plate 2-Piece Set Overview The Land Rover Discovery Sport (L550, 2015–2019) is built to live an active life — and that means the rear loading sill takes a constant beating. Whether you're loading mountain bikes, pushing dogs in and out, or sliding kit across the bumper, the painted surface underneath is one of the first areas to show the wear of everyday adventure use. It's a detail that's easy to overlook, and expensive to remedy once the damage is done. This rear bumper scuff plate and sill guard trim is engineered specifically for the 2015–2019 Discovery Sport. Manufactured from high-grade stainless steel, each piece is formed to match the contours of the rear bumper loading edge precisely — sitting flush against the surface for a clean, purposeful finish. Available in brushed silver and gloss black to complement both standard and contrast-roof specifications. Installation requires no drilling and no permanent modification. A professional-grade double-sided adhesive backing creates a firm, lasting bond on a clean surface, and the result looks entirely at home on the vehicle — as though it should have been there from the factory. A small investment that preserves resale value and keeps your Discovery Sport looking sharp for the long term. What's Included 🛡️ Rear Bumper Scuff Plate Main loading sill protector — stainless steel 🔩 Sill Guard Cover Trim Secondary sill edge guard piece 📎 Pre-Applied Adhesive Double-sided tape pre-fitted to both pieces 📋 Installation Guide Step-by-step fitting instructions included Product Highlights High-grade stainless steel construction for lasting durability Available in brushed silver and gloss black finish options Custom-profiled to match Discovery Sport L550 rear bumper geometry No drilling required — adhesive-backed for clean fitment Protects painted bumper surface from daily loading scuffs 2-piece set covers the full width of the rear loading sill Retains factory aesthetics with a discrete, integrated appearance Easy DIY installation — no specialist tools needed Manufactured in an ISO9001-certified production facility Helps preserve vehicle resale value by preventing surface damage Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020 – 2024 Not Confirmed Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2012 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean the rear bumper loading sill surface using an isopropyl alcohol wipe, removing all dust, wax, and grease residue. Allow to dry fully before proceeding. Dry-fit both scuff plate pieces against the bumper to confirm alignment and positioning before committing to adhesive. Mark alignment lightly with masking tape if needed. Peel back the adhesive protective film on the first piece. Starting from one end, carefully press the scuff plate into position along the loading sill edge, applying firm, even pressure across the full length. Repeat the process for the second piece, ensuring both sections are flush and properly aligned with each other and the bumper contour. Apply firm hand pressure across both pieces for 30–60 seconds to fully activate the adhesive bond. Avoid washing the vehicle or exposing the area to water for at least 24 hours after fitting. ⚠ Note: For best adhesion, install at temperatures above 10°C (50°F). Fitting in cold or damp conditions may reduce the initial bond strength. If the surface has any existing wax sealant or ceramic coating, ensure it is removed in the contact area before installation. The Right Fit for Your Discovery Sport At Victorious Automotive, every accessory we stock is chosen with one standard in mind: does it belong on a Land Rover? This scuff plate does. Browse our full Discovery Sport collection for more accessories selected specifically for your vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Tail Door Switch Frame Cover Trim for Land Rover Discovery Sport (2015–2019) A precision-cut, adhesive-backed silver ABS trim panel that replaces the bare plastic around your Discovery Sport's tail door switch with a clean, premium finish — no tools, no fuss. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Tail Door Switch Adhesive Fit Interior Trim ISO9001 Certified Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that rewards attention to detail. Its cabin is well-proportioned and functional, but the factory plastic trim around the tail door switch area — like many elements of the pre-facelift interior — can look unfinished or tired over time, particularly on higher-mileage examples or vehicles that have seen regular family use. This ABS silver tail door switch frame cover trim is designed specifically to address that. Precision-moulded to follow the exact contours of the switch surround, it sits flush against the panel and adheres cleanly using a pre-applied double-sided tape backing. The result is an immediate uplift in perceived quality — the kind of small change that makes the whole rear cabin feel more considered and complete. Manufactured in an ISO9001-certified facility from high-grade ABS plastic, the silver finish is consistent, durable, and resistant to the minor knocks and scuffs that rear door areas routinely encounter. For Discovery Sport owners who take pride in maintaining their vehicle's presentation, this is a straightforward, low-effort upgrade that delivers a genuinely noticeable result. What's Included 🪟 Tail Door Switch Frame Cover 1 × silver ABS trim panel, pre-cut to fit 🔲 Double-Sided Adhesive Tape Pre-applied to reverse — ready to install 📋 Installation Guide Basic fitting instructions included Product Highlights Precision-moulded ABS plastic — exact fit for L550 Discovery Sport Silver finish adds a clean, modern premium look to the tail door area Pre-applied double-sided adhesive — no drilling or modification required High-grade ABS construction resists daily wear, knocks and scuffs ISO9001-certified manufacturing for consistent quality and tolerances Designed specifically for 2015–2019 model year Discovery Sports Sits flush and seamlessly against the existing switch panel surround Lightweight construction — no impact on door mechanism or weight Reversible fitment — can be removed without damaging original trim A cost-effective interior refresh with immediate visual impact Compatibility Vehicle Code Year Range Fit Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020 – 2024 Verify Before Purchase Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 5 L462 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Open the tail door fully and ensure the switch surround area is clean, dry, and free from any grease, wax, or residue. A light wipe with isopropyl alcohol is recommended for optimal adhesion. Dry-fit the trim panel against the switch surround before removing the adhesive backing — confirm the panel sits flush and aligns precisely with all switch cutouts. Peel the protective film from the pre-applied double-sided adhesive tape on the reverse of the trim panel. Position the trim carefully against the switch surround, aligning from one edge and pressing progressively across the panel to avoid air bubbles or misalignment. Apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing the trim to heavy use or moisture for maximum bond strength. ⚠ Note: Ensure the trim is compatible with your specific Discovery Sport model year and body configuration before installation. If your vehicle has been previously modified or has non-standard trim panels, dry-fit carefully before committing the adhesive. Once bonded, removal may require a trim removal tool and gentle heat application. Upgrade Your Discovery Sport Interior Explore our full range of interior trim accessories for the Land Rover Discovery Sport — from door handle surrounds to dashboard accents, every piece is selected for quality, fitment and lasting finish. Shop Discovery Sport Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS B Pillar Air Conditioner Vent Frame Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-fit interior trim upgrade that adds a clean silver accent to the B pillar air conditioning vents of your Discovery Sport — no drilling, no fuss. Discovery Sport L550 2015–2019 High-Grade ABS Plastic Silver Finish Adhesive Fit Interior Trim Direct Fit No Drilling Required Overview The Land Rover Discovery Sport (L550) has always struck a balance between genuine off-road versatility and refined everyday usability. Its interior, while well-proportioned and practical, often benefits from carefully chosen trim accents — small details that elevate the overall feel of the cabin without disrupting its clean factory design language. These B Pillar Air Conditioner Vent Frame Cover Trims are precision-manufactured from high-grade ABS plastic with a silver finish that integrates naturally with the Discovery Sport's existing interior tones. They sit cleanly over the factory B pillar air vent surrounds, adding definition and a premium edge to an area that often goes unnoticed — but is very much visible to anyone in the rear seats. Installation is straightforward and tool-free. Each cover is pre-applied with 3M-grade double-sided adhesive tape, meaning the upgrade is genuinely achievable in minutes. Whether you're refreshing a well-used cabin or adding considered detail to a newer car, these covers are the kind of quiet upgrade that Discovery Sport owners will appreciate every time they open the door. What's Included 🪟 B Pillar Vent Frame Covers 2 pieces — left & right, pre-taped 📋 Adhesive Backing 3M-grade tape pre-applied to each cover Product Highlights Precision-engineered for 2015–2019 Discovery Sport L550 models High-grade ABS plastic construction — durable and heat-resistant Silver finish complements factory chrome and light interior trim elements Available in Silver, Black, Carbon Fibre and Black Wood Grain finishes Pre-applied 3M-grade double-sided adhesive for reliable, lasting fitment Tool-free installation — no cutting, drilling or professional fitting needed Covers both left and right B pillar vent surrounds (pair included) Lightweight design adds visual impact without adding bulk 100% brand new — not a used or refurbished part Easy to remove cleanly if needed without damaging factory trim Compatibility Vehicle Years Trim / Variant Fitment Land Rover Discovery Sport L550 2015–2019 All Trim Levels (SE, HSE, HSE Luxury) Direct Fit Land Rover Discovery Sport L550 2020–2024 Facelift Models Not Compatible Land Rover Discovery 5 L462 2017–2024 All Variants Not Compatible Range Rover Evoque L538 2011–2018 All Variants Not Compatible Range Rover Evoque L551 2019–2024 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 minutes  ·  🔧 Tools Required: None Thoroughly clean both B pillar vent surround surfaces using an isopropyl alcohol wipe. Remove any dust, grease or residue and allow to dry completely — this is the most important step for long-term adhesion. Dry-fit each cover over the vent surround before removing the adhesive backing. Check alignment and confirm the cover sits flush and centred on both sides. Peel the protective film from the pre-applied adhesive tape on the reverse of the first cover. Carefully position the cover over the vent surround, aligning from the centre outward. Press firmly and evenly across the full surface for 30–60 seconds. Repeat for the second cover on the opposite B pillar vent. Allow 24 hours for the adhesive to fully cure before exposing the trim to direct sunlight or temperature extremes. ⚠ Note: Do not install in temperatures below 10°C — adhesive performance is significantly reduced in cold conditions. For best results, install indoors or in a warm garage environment. Avoid cleaning the area with aggressive solvents after installation. More for Your Discovery Sport Browse our full range of interior and exterior accessories designed specifically for the Land Rover Discovery Sport — every part selected for fit, quality and finish. Shop Discovery Sport Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Land Rover Discovery Sport 2015–2018 Center Console Mode Button Frame — ABS Matte Black Sticker A precision-cut ABS matte black trim overlay that upgrades the center console mode button surround of your Discovery Sport with a clean, contemporary finish — no tools, no cutting, no compromise. Discovery Sport L550 2015–2018 ABS Plastic Matte Black Interior Trim Center Console Direct Fit No Drilling Overview The Land Rover Discovery Sport (L550, 2015–2018) occupies a unique space in the Land Rover lineup — practical, composed, and genuinely capable. Owners who care about keeping the cabin looking its best know that the details matter. The center console area, home to the drive mode selector buttons, is one of the most visually prominent and frequently touched surfaces inside the vehicle. Over time, the standard factory surround can show wear, fading, or simply lack the character the rest of the cabin deserves. This center console mode button frame sticker is engineered from high-grade ABS (Acrylonitrile Butadiene Styrene) plastic and finished in a refined matte black. Unlike generic overlays, this piece is cut and formed specifically for the Discovery Sport's console geometry, ensuring precise alignment around the mode button cluster without gaps, lifting edges, or misaligned cutouts. The matte black finish integrates seamlessly with both light and dark interior colour schemes — complementing the Sport's interior design language while adding a subtle, purposeful upgrade. Whether you're refreshing a tired console or simply elevating the interior aesthetic from day one, this is the cleanest way to do it. What's Included 🖤 Mode Button Frame Sticker × 1 ABS matte black center console trim overlay 🔧 Pre-Applied Adhesive Double-sided tape pre-fitted to reverse face 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-formed specifically for the Discovery Sport L550 (2015–2018) console geometry High-grade ABS plastic construction — rigid, lightweight, and durable Matte black finish — resistant to fingerprints and surface glare Pre-applied double-sided adhesive for fast, tool-free installation 100% brand new — supplied in protective packaging to prevent transit damage Covers existing wear, scuffs, or discolouration on the OEM surround Does not interfere with button operation or tactile feedback Works with both standard and premium Discovery Sport interior trims Reversible fitment — can be removed without damage to factory surface Complements other matte black interior upgrades for a cohesive cabin look Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015 – 2018 Direct Fit Land Rover Discovery Sport L550 (Facelift) 2019 – 2022 Verify Before Order Range Rover Evoque L538 2011 – 2018 Not Compatible Land Rover Discovery 5 L462 2017 – 2022 Not Compatible Land Rover Freelander 2 L359 All Years Not Compatible Not sure about your exact build year or interior configuration? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Beginner Begin with the vehicle off and the interior at room temperature. Cold surfaces reduce adhesive bond strength — if installing in winter, allow the cabin to warm slightly first. Thoroughly clean the existing mode button surround area using an isopropyl alcohol wipe (70% or higher). Remove all dust, oils, and residue. Allow to dry completely — this is the most important step for long-term adhesion. Dry-fit the trim piece over the console surround without removing the adhesive backing. Confirm alignment around all button cutouts and edges before committing. Once satisfied with positioning, peel back the adhesive liner from the reverse of the trim piece. Do not touch the adhesive surface. Align the piece carefully from one end and press down progressively across the surface, applying firm, even pressure with your thumb or a soft cloth to eliminate air bubbles. Apply sustained pressure across the entire piece for 30–60 seconds. Avoid operating the buttons for at least one hour to allow the adhesive to fully cure. ⚠ Note: Do not use abrasive cleaners or silicone-based dressings on or around the fitment area prior to installation, as these leave residue that prevents proper adhesion. If the trim piece ever needs to be removed, apply gentle heat from a hairdryer to soften the adhesive before peeling slowly from one corner. Explore More Discovery Sport Accessories Looking to continue the interior refresh? Browse the full range of Land Rover Discovery Sport accessories at Victorious — from dashboard overlays and door trim upgrades to exterior styling pieces, all designed to the same standard of fit and finish. → Shop All Land Rover Discovery Sport Accessories Upgrade Your Discovery Sport Interior Today Every detail inside your Land Rover is a reflection of how you maintain it. This matte black mode button frame is a simple, permanent-looking upgrade that takes minutes to fit and lasts for the life of the vehicle. Shop Discovery Sport Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim Land Rover Discovery Sport ABS Silver Fuel Tank Cover Trim Sticker — 2015–2019 A precision-moulded ABS silver fuel filler cap surround that brings a refined, purposeful finish to the Discovery Sport's exterior — no tools required. Discovery Sport 2015–2019 L550 ABS Plastic Silver Finish Exterior Trim Fuel Tank Cover No Drilling Direct Fit Overview The Land Rover Discovery Sport (L550) sits at the heart of the Discovery family — a capable, refined compact SUV that rewards owners who pay attention to the details. From the factory, the fuel filler area is left largely unadorned, offering little in the way of visual character for a vehicle that otherwise carries Land Rover's premium design language throughout. This ABS Silver Fuel Tank Cover Trim Sticker changes that. Engineered specifically for the 2015–2019 Discovery Sport, it wraps the fuel cap surround in a clean silver-finish ABS surround that integrates naturally with the vehicle's exterior bodywork. The result is a sharper, more considered look — one that feels factory-appropriate rather than aftermarket. Manufactured from high-grade ABS plastic, the trim offers genuine resistance to UV fading, temperature fluctuation, and everyday road debris. Installation is entirely adhesive-based — no drilling, no wiring, no specialist tools. Clean the surface, peel, and press. It's the kind of upgrade Discovery Sport owners appreciate precisely because it doesn't announce itself. What's Included 🔲 Fuel Tank Cover Trim 1x ABS silver surround sticker — precision cut for the Discovery Sport L550 fuel filler recess 🔧 Pre-Applied Adhesive High-bond double-sided tape pre-fitted to the reverse of the trim panel 📋 Installation Guide Step-by-step fitting instructions included in the packaging Product Highlights Precision-moulded ABS plastic construction for a factory-quality fit UV-stable silver finish resists fading and discolouration over time Pre-applied high-bond double-sided adhesive — no tools required Engineered exclusively for the Discovery Sport L550 fuel filler recess Resistant to road debris, temperature extremes, and car wash chemicals Lightweight profile adds visual detail without added bulk Silver finish complements both light and dark exterior colour schemes Clean, reversible installation — no permanent modification to bodywork Straightforward DIY fit achievable in under 15 minutes Packaged securely to prevent transit damage before installation Compatibility Vehicle Code Years Fitment Land Rover Discovery Sport L550 2015–2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020–2024 Verify Before Purchase Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 5 L462 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure your Discovery Sport has been parked and the engine is fully cool before starting. Avoid installation in direct sunlight or cold temperatures below 10°C, as this affects adhesive performance. Thoroughly clean the fuel filler recess area using isopropyl alcohol (IPA) or a panel wipe solution. Remove all traces of dirt, wax, polish, or moisture from the surface. Allow the cleaned surface to dry completely for at least 5 minutes before proceeding. Trial-fit the trim piece dry — without removing the adhesive backing — to confirm alignment and positioning before committing to the final fit. Peel back the adhesive liner from the rear of the trim and carefully align the piece over the fuel filler recess, starting from one edge and pressing down progressively to avoid trapping air bubbles. Apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Allow a minimum of 2 hours before exposing the vehicle to rain, washing, or extreme temperatures to allow the bond to fully cure. ⚠ Important: Do not attempt installation on a wet, waxed, or freshly painted surface. Failure to properly clean and dry the application area may result in reduced adhesive performance. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before fitting. Built for Discovery Sport Owners Who Care At Victorious Automotive, every accessory we stock is chosen with one thing in mind: doing justice to your Land Rover. Browse our full Discovery Sport collection for more exterior and interior upgrades, or get in touch — our team knows these vehicles inside out. Shop All Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Gear Shift Frame Cover Trim Sticker for Land Rover Discovery Sport (2015–2019) A precision-fit silver trim sticker that instantly elevates the centre console of your Discovery Sport — clean, sharp, and built to last. Discovery Sport L550 2015–2019 High-Grade ABS Plastic Silver Finish Gear Shift Trim No Drilling Required Direct Fit Interior Accessory Overview The Land Rover Discovery Sport is a machine built for those who refuse to compromise — capable on any terrain, yet refined enough for every day. Its interior deserves the same attention to detail that went into engineering the rest of the vehicle. Over time, the gear shift surround area can begin to look worn or simply feel uninspired against the rest of the cabin's design language. This trim sticker addresses that directly. Crafted from high-grade ABS plastic with a smooth silver finish, this gear shift frame cover is designed to sit flush against the existing centre console surround on 2015–2019 Discovery Sport models. The surface finish is consistent and reflective without being garish — it complements the factory interior rather than competing with it. Whether your Discovery Sport features a light or dark interior, the neutral silver tone integrates naturally with the surrounding switchgear and materials. Installation requires no specialist tools, no drilling, and no modification to the original interior. A pre-applied double-sided adhesive backing bonds cleanly to the OEM surface, providing a firm, rattle-free hold. It's the kind of upgrade that looks factory-fitted the moment it's in place — exactly as it should be. What's Included 🎛️ Gear Shift Frame Cover Trim 1 × silver ABS sticker trim, pre-cut and adhesive-ready 🔲 Pre-Applied Adhesive Backing Double-sided tape bonded to the rear of the trim panel Product Highlights Precision-cut to match the gear shift frame on 2015–2019 Discovery Sport models High-grade ABS plastic — resistant to heat, UV fading, and daily wear Polished silver finish complements both light and dark Discovery Sport interiors Pre-applied double-sided adhesive for a secure, rattle-free bond No drilling, cutting, or specialist tools required for installation Covers minor scuffs, scratches, or wear on the original gear surround Slim profile sits flush with surrounding trim for a factory-fitted appearance Does not interfere with gear selector operation or surrounding controls 100% brand new — supplied in protective packaging to prevent transit damage Worldwide delivery available via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim / Variant Fitment Land Rover Discovery Sport L550 2015–2019 SE, HSE, HSE Luxury Direct Fit Land Rover Discovery Sport L550 2015–2019 Dynamic, Black Edition Direct Fit Land Rover Discovery Sport L550 2020–2024 (Facelift) All Variants Not Confirmed Land Rover Discovery 5 L462 2017–2024 All Variants Not Compatible Range Rover Evoque L538 2011–2018 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the vehicle interior is at room temperature. Cold surfaces can reduce adhesive effectiveness — avoid installation in temperatures below 10°C. Thoroughly clean the existing gear shift frame surround using an isopropyl alcohol wipe or a lint-free cloth with interior cleaner. Remove all dust, grease, and residue. Allow to dry completely. Dry-fit the trim piece over the gear shift frame without removing the adhesive backing. Confirm the alignment and check that all edges sit flush with the surrounding interior surfaces. Peel back a small section of the adhesive backing and carefully position one edge of the trim against the gear shift frame, using your dry-fit reference points to guide placement. Press the trim firmly into place, working from one side to the other to eliminate any air pockets. Apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before subjecting the trim to heavy use or cleaning. ⚠ Note: Do not attempt to reposition the trim once the adhesive has made full contact with the surface. If adjustment is needed, act immediately before the bond sets. Avoid using harsh chemical cleaners directly on the trim surface, as these may affect the finish over time. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — each piece selected and tested to meet the standards Discovery Sport owners expect. Shop Discovery Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Aluminum Alloy Steering Wheel Button Stickers for Land Rover Discovery Sport 2015–2019 — Silver & Black A precision-cut, direct-fit upgrade that gives the Discovery Sport's steering wheel controls a richer, more premium finish — in just minutes, with no tools required. Discovery Sport L550 2015–2019 Aluminum Alloy Silver / Black Direct Fit No Drilling 10-Piece Set Interior Trim Overview The Land Rover Discovery Sport L550 was engineered as a refined, capable compact SUV — and for owners who love their vehicles, every detail of the cabin matters. The steering wheel is your most constant point of contact with the car, yet the factory button surrounds can look underwhelming when placed against a higher-spec interior or aftermarket upgrades. These aluminum alloy sticker overlays are designed to address that gap with a clean, confident upgrade. Each piece in this 10-part set is precision-cut from genuine aluminum alloy — not plastic, not chrome-effect film — and shaped to sit flush over the existing steering wheel button panels found on Discovery Sport models from 2015 through 2019. Available in silver and black finishes, they integrate naturally with both the light and dark interior trims common across SE, HSE, and HSE Luxury specification vehicles from this generation. Installation is entirely tool-free. A factory-grade double-sided adhesive backing holds each piece firmly in place without damaging the underlying buttons or trim. Whether you're refreshing a slightly tired cabin or simply elevating the feel of a well-maintained vehicle, these stickers deliver a result that's immediately noticeable — and built to last. What's Included 🎛️ Steering Wheel Button Stickers × 10 Full set — covers all primary steering wheel control zones 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-installed on each piece — ready to fit 🧤 Cleaning Prep Wipe For surface preparation prior to application 📋 Installation Guide Step-by-step fitment reference included in packaging Product Highlights Precision-cut aluminum alloy construction — not plastic or chrome film Available in silver and black to match your interior specification Direct-fit design for Discovery Sport L550 2015–2019 steering wheels Tool-free installation with pre-applied double-sided adhesive 10-piece complete set — covers all main control button areas No modification to original buttons, trim, or wiring required Resistant to everyday wear, UV exposure, and temperature variation Low-profile fit — does not impede button function or tactile feel Instantly refreshes cabin feel without a costly interior refurbishment Pairs well with other Discovery Sport interior trim upgrades Compatibility Vehicle Years Trim / Notes Fitment Land Rover Discovery Sport L550 2015–2019 SE, HSE, HSE Luxury — all standard steering wheels Direct Fit Land Rover Discovery Sport L550 2020–2024 Revised facelift steering wheel layout Not Compatible Land Rover Discovery 5 (L462) 2017–2024 Different steering wheel button configuration Not Compatible Range Rover Evoque L538 2012–2019 Shared platform but different wheel trim layout Not Compatible Range Rover Evoque L551 2019–2024 New generation — different steering wheel design Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  |  🔧 Difficulty: Beginner Begin with the steering wheel in its natural, centered position. Turn off the ignition and allow the wheel to cool if the vehicle has been recently driven. Use the included prep wipe to thoroughly clean each button surround area where the stickers will be applied. Remove any dust, oils, or residue and allow to dry completely — at least 60 seconds. Dry-fit each aluminum sticker against its corresponding button location before committing. Confirm orientation and alignment before removing the adhesive backing. Peel the protective backing from a single sticker. Carefully align it to the button surround and press down firmly from the centre outward to eliminate any air pockets. Hold firm pressure on each piece for 20–30 seconds. Repeat for all remaining stickers. Allow the adhesive to fully cure for 24 hours before heavy use or exposure to moisture for best long-term adhesion. ⚠ Note: Ensure the button surfaces are completely dry and free from silicone-based interior dressings or conditioners before applying. These products can significantly reduce adhesive bond strength. Do not apply in temperatures below 10°C (50°F). Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport accessories — from interior trim upgrades to exterior styling pieces — all curated specifically for your vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport & Range Rover Evoque · Interior Trim Stainless Steel Fuel & Brake Pedal Cover Trim for Land Rover Discovery Sport (2015–2019) & Range Rover Evoque (2012–2018) A precision-cut stainless steel pedal cover set that elevates the footwell of your Discovery Sport or Evoque with a clean, factory-premium finish — fitted in minutes, built to last. Discovery Sport 2015–2019 Range Rover Evoque 2012–2018 Stainless Steel Silver Finish No Modification Required 2-Piece Set Interior Trim Direct Fit Overview The Land Rover Discovery Sport and Range Rover Evoque were designed with a distinctly premium interior philosophy — refined materials, purposeful ergonomics, and an attention to detail that sets them apart in the compact SUV segment. For owners who appreciate that philosophy and want every surface of their cabin to reflect it, the factory rubber pedal faces can feel like an unfinished detail in an otherwise polished environment. These stainless steel pedal cover trims are machined and finished to complement the interior tone of both the Discovery Sport (2015–2019) and the Range Rover Evoque (2012–2018). The brushed silver surface resists scuffs, marks, and the general wear that rubber pedals accumulate over time, while the tactile surface pattern maintains confident grip underfoot during spirited or everyday driving. The fitment is straightforward and secure — each cover is designed to sit flush over the existing pedal face using a clip-and-adhesive retention system that requires no drilling, cutting, or professional installation. The result is an interior upgrade that looks intentional, costs little, and makes a tangible difference every time you slide behind the wheel. What's Included 🦶 Accelerator Pedal Cover Brushed stainless steel, direct fit over OEM pedal face 🛑 Brake Pedal Cover Matching stainless steel finish, shaped to brake pedal profile 🔧 Fitting Hardware Retention clips and adhesive pads included 📄 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Premium 304-grade stainless steel construction for exceptional longevity Brushed silver finish complements both black and light-coloured interior trims Precisely profiled to match the Discovery Sport and Evoque pedal geometry Anti-slip surface pattern provides confident foot placement in all conditions Clip-and-adhesive retention — no drilling or modification required Corrosion and tarnish resistant — maintains appearance over years of use Easy to clean — simply wipe with a damp cloth or interior detailer Significantly more durable than standard rubber pedal faces Pairs well with other stainless interior trim upgrades for a cohesive look 2-piece set covers both accelerator and brake for a complete footwell refresh Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery Sport L550 2015–2019 Direct Fit Range Rover Evoque L538 2012–2018 Direct Fit Land Rover Discovery Sport L550 2020–2024 (Facelift) Verify Before Purchase Range Rover Evoque L551 2019–2024 Not Compatible Land Rover Freelander 2 L359 All Years Not Compatible Range Rover Sport L494 All Years Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Ensure the existing pedal faces are clean, dry, and free from any grease, dust, or residue — use an interior cleaner and allow to dry fully before fitting. Test-fit both pedal covers over the accelerator and brake pedals without adhesive first to confirm positioning and alignment. Peel the backing from the adhesive pads and apply the retention clips to the rear of each cover as directed in the included instruction sheet. Press each pedal cover firmly onto the corresponding pedal face, applying even pressure for 30–60 seconds to ensure a secure bond. Allow the adhesive to cure for a minimum of 2 hours before driving — ideally leave overnight for maximum retention strength. Inspect both covers after the first drive to confirm fitment is secure. No further adjustment should be necessary. ⚠ Important: Always ensure pedal covers are fully and securely seated before driving. A loose pedal cover can interfere with pedal travel and create a safety hazard. If in doubt about fitment, have the covers inspected by a qualified technician before use. Explore More for Your Vehicle Looking to take your Discovery Sport or Evoque interior further? Browse our full collections of premium interior and exterior upgrades, curated specifically for your vehicle: 🚙 Discovery Sport Accessories Interior, exterior & protection upgrades 🏁 Range Rover Evoque L538 Full accessory range for the L538 generation ✨ Range Rover Evoque L551 Accessories for the 2019-onwards Evoque 🔍 Discovery 5 Accessories Upgrades for the full-size Discovery L462 Upgrade Your Footwell Today Trusted by over 12,300 Land Rover and Range Rover owners worldwide — Victorious Automotive delivers premium accessories with the attention to detail your vehicle deserves. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop Discovery Sport Accessories Use code below for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification. Fitment information is provided in good faith and should be verified against your specific vehicle prior to purchase.

Victorious Automotive · Land Rover Discovery Sport L550 · Interior Trim Aluminum Alloy Window Button Cover Stickers for Land Rover Discovery Sport L550 (2019–2020) Precision-cut aluminium alloy covers that upgrade your Discovery Sport's window switch panel from factory plastic to a refined, metal-finished surface — with zero modification required. Discovery Sport L550 2019–2020 Aluminum Alloy Silver Finish Direct Adhesive Fit Interior Trim Window Button Cover No Drilling Required Overview The Land Rover Discovery Sport L550 is a refined compact SUV that walks a confident line between practicality and premium feel. The 2019 and 2020 model years brought meaningful interior upgrades, yet one area that still speaks plainly from the factory is the window switch surround — functional, but visually understated against the rest of the cabin's ambition. These Aluminum Alloy Window Button Cover Stickers are designed with that gap in mind. Machined from high-grade aluminium alloy and finished in a brushed silver tone, each cover lays cleanly over the existing window button panel, introducing a cool metallic contrast that reads immediately as an intentional, premium upgrade. The result is an interior that feels more cohesive — closer to the executive specification many Discovery Sport owners aspire to. Installation requires no tools, no drilling, and no specialist knowledge. A precision-grade adhesive backing bonds directly to the existing switch surface, holding securely without damaging the original trim underneath. Whether you're building out a full interior refresh or simply want one focused, visible improvement, this is one of the most rewarding upgrades available for the L550's cabin. What's Included 🪟 Window Button Cover Set Full set of aluminium alloy sticker covers for window switch panel 🔧 Pre-Applied Adhesive Precision adhesive backing pre-fitted to each cover piece 🧹 Cleaning Wipe Surface prep wipe for clean adhesion before fitting 📄 Fitting Guide Step-by-step instruction sheet for straightforward installation Product Highlights Precision-cut aluminium alloy construction built to last the life of the vehicle Brushed silver finish that integrates naturally with the L550's interior palette Pre-applied, high-bond adhesive backing for a firm, rattle-free fit Exact-fit design engineered specifically for the 2019–2020 Discovery Sport L550 Protects original window buttons from scratches, wear, and surface degradation Tool-free installation — no drilling, no cutting, no professional fitting required Lightweight material adds visual premium without altering ergonomics Fully reversible — can be removed without damaging factory trim beneath Corrosion-resistant alloy maintains its finish in all cabin temperature conditions Elevates the overall interior feel alongside other trim and switch upgrades Compatibility Vehicle Code Year Range Fit Land Rover Discovery Sport L550 2019–2020 Direct Fit Land Rover Discovery Sport L550 2015–2018 Not Confirmed Land Rover Discovery Sport L550 2021–2024 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Land Rover Discovery 5 L462 2017–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–15 Minutes  |  🔩 Tools Required: None Begin with your vehicle parked on a level surface with the ignition off. Allow the interior to reach ambient temperature — avoid fitting in very hot or very cold conditions. Use the included cleaning wipe to thoroughly clean the surface of each window button panel. Remove any dust, oils, or residue and allow to dry completely for at least two minutes. Carefully peel the protective film from the adhesive backing of the first cover piece, taking care not to touch the adhesive surface with your fingers. Align the cover precisely over the corresponding window button panel. Use the cutouts as guides — do not press down until you are fully satisfied with alignment. Once aligned, apply firm, even pressure across the entire cover surface for 20–30 seconds to activate the adhesive bond. Repeat the process for each remaining cover piece. Allow 30–60 minutes of settling time before regular use of the window buttons. ⚠ Important: Confirm your exact model year before fitting. The L550 Discovery Sport underwent interior panel revisions across its production run — these covers are confirmed for 2019–2020 specification only. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Discovery Sport Interior Explore our full range of Land Rover Discovery Sport accessories — from interior trim upgrades to exterior styling and protective accessories, curated specifically for L550 owners who take pride in every detail. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS B Pillar Hook Cover Trim Stickers for Land Rover Discovery Sport 2015–2019 A precision-cut, silver ABS trim upgrade that conceals the factory B pillar coat hooks and brings a clean, cohesive finish to your Discovery Sport's interior — no tools required. Discovery Sport 2015–2019 L550 ABS Plastic Silver Finish B Pillar Trim Hook Cover No-Tool Fit Interior Upgrade Direct Fit Overview The Land Rover Discovery Sport (L550) is built around a refined, practical cabin designed to accommodate everyday life without sacrificing quality. The B pillar area, home to the factory coat hooks, is one of those small details that the keenest owners notice — and when left uncovered, the hook surround can look unfinished against the rest of the interior's considered design. These silver ABS B Pillar Hook Cover Trim Stickers are engineered specifically for the Discovery Sport produced between 2015 and 2019. Each cover is precision-shaped to sit flush over the existing hook housing, creating a smooth, silver-accented detail that complements both dark and light interior colour schemes. The high-quality ABS plastic construction resists flexing, fading, and everyday wear — so they'll stay looking sharp for the long haul. Installation takes only a matter of minutes. A factory-grade double-sided adhesive backing is pre-applied to each cover, meaning no drilling, no clips, and no risk of damaging your existing trim. For Discovery Sport owners who prefer their cabin to reflect the same attention to detail as the rest of the vehicle, this is a simple, effective, and affordable upgrade. What's Included 🪝 B Pillar Hook Cover Trim (x2) One for each rear B pillar — left and right sides 🔲 Pre-Applied Adhesive Double-sided tape pre-fitted to each cover — ready to install 📄 Installation Guidance Simple step-by-step fitment instructions included Product Highlights Precision-engineered profile designed specifically for the Discovery Sport L550 B pillar hook housing High-quality ABS plastic construction — impact-resistant and built to last Silver finish adds a refined, cohesive accent to your vehicle's interior trim Pre-applied factory-grade double-sided adhesive for fast, tool-free installation Covers the existing hook surround cleanly with no visible gaps or lifting edges Compatible with both standard and upgraded Discovery Sport interiors from 2015 to 2019 Resistant to UV fading, heat, and everyday interior wear Lightweight design — zero additional weight burden on the B pillar area Reversible upgrade — can be removed carefully without damaging the original trim Supplied as a matched pair so both sides of the cabin are finished identically Compatibility Vehicle Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 2020 – 2024 (Facelift) Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin by thoroughly cleaning the B pillar hook housing area on both sides of the cabin. Use an alcohol-based cleaner or panel wipe to remove any dust, grease, or residue. Allow the surface to dry completely before proceeding. Test-fit each cover without removing the adhesive backing, holding it in position to confirm alignment and coverage over the hook surround. Peel back the adhesive liner from the first cover, taking care not to touch the adhesive surface with your fingers. Align the cover carefully over the hook housing and press it firmly into position, working from the centre outward to avoid air pockets. Apply firm, even hand pressure across the entire cover for 30–60 seconds to ensure full adhesive contact. Repeat for the second cover on the opposite B pillar. Allow the adhesive to cure for at least 24 hours before placing any load or stress on the covers. ⚠ Important: Do not install in cold conditions below 10°C / 50°F — adhesive performance is significantly reduced in low temperatures. If your vehicle has been parked in the cold, bring it to room temperature before fitting. Ensure the surface is completely dry; any moisture will compromise the bond. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — from dashboard trim and centre console upgrades to door handle covers and storage solutions. Every product is selected for fit, finish, and long-term quality. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim Silver ABS Side Air Vent Fender Trim — Land Rover Discovery Sport 2015–2019 A precision-matched fender vent trim that adds a purposeful, performance-inspired aesthetic to the Discovery Sport's front quarter panels — no cutting, no drilling, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Exterior Trim Side Air Vent Fender Accent Pair Included Overview The Land Rover Discovery Sport — introduced in 2015 as the spiritual successor to the Freelander — is a vehicle that straddles the line between family-friendly practicality and genuine off-road capability. It's a machine that rewards personalisation, and owners who know their car well are always looking for ways to sharpen its road presence without straying from the original design language. This Silver ABS Side Air Vent Fender Trim is designed specifically for the Discovery Sport produced between 2015 and 2019. Moulded from high-quality ABS plastic and finished in a clean silver tone, the trim attaches to the front fender area to simulate functional side vents — a design cue borrowed from performance and sporting derivatives across the Land Rover range. The result is a more assertive, athletic stance that looks factory-fitted rather than aftermarket. Available in silver, red, and yellow, this trim gives Discovery Sport owners a simple and reversible way to refresh the exterior without committing to a full body kit or expensive respray. The adhesive-backed fitment process is straightforward and tool-free, making this an ideal weekend upgrade for any enthusiast who wants a meaningful visual result in under an hour. What's Included 🔲 Side Air Vent Fender Trims × 2 Left and right matched pair, silver ABS finish 🔧 Pre-Applied Adhesive Tape 3M-grade backing for a secure, clean bond 📋 Fitment Guide Step-by-step installation reference included Product Highlights Precision-moulded ABS plastic with consistent wall thickness throughout Silver finish replicates the look of factory exterior chrome and satin accents Supplied as a matched left and right pair for balanced fitment Pre-applied adhesive backing ensures clean, rattle-free installation No drilling, cutting, or modification to the vehicle bodywork required Reversible upgrade — removable without damaging original paintwork UV-resistant ABS construction resists fading in direct sunlight Available in multiple colour options: Silver, Red, and Yellow Compatible with all trim levels of the Discovery Sport 2015–2019 Adds a performance-oriented, sporty aesthetic to the front quarter panels Compatibility Vehicle Code Years Fitment Land Rover Discovery Sport L550 2015–2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020–2024 Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Installation Notes 🛠 Difficulty: Beginner — Estimated Time: 20–30 Minutes Thoroughly clean the target area on both front fenders using an IPA (isopropyl alcohol) wipe to remove all wax, grease, and dirt. Allow to dry completely before proceeding. Dry-fit both trim pieces against the fender to confirm positioning and ensure you are satisfied with the placement and symmetry before committing to adhesion. Peel back the adhesive liner from the rear of the trim piece, exposing the bonding tape. Take care not to touch the adhesive surface. Align the trim carefully to your desired position on the fender vent area. Press firmly and evenly across the entire surface for 30–60 seconds to activate the adhesive bond. Repeat the process for the opposing side, ensuring symmetry between left and right trims. Allow a minimum of 24 hours before washing the vehicle or exposing the area to water. This allows the adhesive to cure fully and achieve maximum bond strength. ⚠ Note: Fitment quality is heavily dependent on surface preparation. Do not attempt installation in cold temperatures below 10°C, as adhesive performance may be significantly reduced. If in any doubt, contact our team before installation — we're happy to help. Upgrade Your Discovery Sport Today Browse our full range of Land Rover Discovery Sport accessories — from exterior styling to interior enhancements — all curated specifically for your vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for identification and compatibility purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim ABS Chrome Rear Windscreen Wiper Frame Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-cut chrome trim cover that frames the rear wiper housing with a polished, factory-finish aesthetic — no drilling, no fuss, no compromise. Discovery Sport L550 2015–2019 ABS Chrome Rear Wiper Trim Adhesive Fit 3-Piece Set Silver & Black Options Exterior Styling Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that rewards careful attention to detail — from its confident road presence to its meticulously resolved bodywork. For owners who take pride in maintaining or elevating every panel and surface, the rear tailgate area is often an overlooked opportunity. The factory-fitted rear wiper housing, while functional, lacks the visual refinement that the rest of the body deserves. This ABS chrome rear windscreen wiper frame cover trim changes that. Designed specifically for the Discovery Sport's rear wiper architecture, each piece wraps around the existing housing with a tight, gap-free fit. The chrome-plated ABS surface catches light cleanly, adding a bright metallic accent that reads as genuinely premium — not aftermarket. Whether you're finishing off a full exterior chrome kit or simply adding a single considered touch to the rear of your Discovery Sport, this trim delivers a visual upgrade that punches well above its price point. It requires no modification to your vehicle and can be installed in under ten minutes using the included 3M-grade adhesive backing. What's Included ✨ Wiper Frame Cover × 3 Full 3-piece chrome trim set for the rear wiper housing 🔲 Pre-applied Adhesive Tape 3M-grade double-sided tape pre-fitted to each piece 🧽 Cleaning Wipe Surface prep wipe for a clean, secure bond 📄 Fitting Guide Step-by-step instruction sheet included Product Highlights Precision-cut to match Discovery Sport L550 rear wiper housing geometry High-gloss chrome-plated ABS — resistant to UV fading and surface tarnish Lightweight construction — adds zero meaningful weight to the tailgate 3M-grade adhesive backing for a firm, rattle-free bond No drilling, cutting or professional fitting required Available in Silver Chrome and Gloss Black finish options 3-piece set for full coverage of the rear wiper surround Compatible with both petrol and diesel Discovery Sport variants Pairs perfectly with door handle, mirror and grille chrome trim kits Removable without paint damage when correct removal technique is used Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015–2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020–2024 Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Evoque L538 / L551 2011–2024 Not Compatible Range Rover Sport L494 / L461 2013–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 minutes  ·  🛠 Tools Required: None Thoroughly clean the rear wiper housing and surrounding paintwork using the included prep wipe. Ensure the surface is completely dry and free of wax, grease or polish residue. Dry-fit each of the three trim pieces against the wiper frame without removing the adhesive backing. Confirm alignment and panel coverage before committing. Remove the adhesive backing liner from the first trim piece. Starting from one end, carefully press the trim into position using firm, even pressure across the full length. Repeat for the remaining two trim pieces, ensuring tight joins between each section where applicable. Apply firm pressure across all surfaces for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing to rain or washing. ⚠ Note: Install in ambient temperatures above 10°C for optimal adhesive performance. Avoid installing in direct sunlight or on a hot surface. Do not use a pressure washer directly against the trim edges within the first 48 hours of installation. Explore More Discovery Sport Accessories Looking to extend the chrome detail further across your Discovery Sport? Browse our full collection of exterior and interior accessories — including door handle covers, mirror caps, grille surrounds and dashboard trim — all curated specifically for the L550. → Shop All Land Rover Discovery Sport Accessories Built for Land Rover Owners Who Notice the Details Trusted by over 12,300 Land Rover and Range Rover owners worldwide. Every order ships via DHL, FedEx or UPS — with worldwide delivery and a 30-day money-back guarantee. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by or approved by Land Rover, Jaguar Land Rover (JLR) or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Steering Wheel Trim Cover Strips — Land Rover Discovery Sport 2015–2019 A precision-fit interior upgrade that brings a polished, premium finish to the Discovery Sport's steering wheel — no tools required. Discovery Sport L550 2015–2019 Silver Finish ABS Plastic Direct Fit Self-Adhesive Interior Trim No Tools Required Overview The Land Rover Discovery Sport L550, launched in 2015, struck a balance between everyday practicality and considered design — an SUV built for owners who demand both capability and refinement. The interior, while well-appointed from the factory, offers real scope for personalisation, and the steering wheel is one of the most tactile focal points in the cabin. It's the surface you interact with on every single journey. These Silver ABS Steering Wheel Trim Cover Strips are designed specifically for the Discovery Sport produced between 2015 and 2019. Manufactured from high-grade ABS plastic with a silver chrome-effect finish, they clip and adhere cleanly onto the existing steering wheel trim strips, transforming the look of the wheel without any permanent modification. The result is a crisper, more premium aesthetic that complements both light and dark interior colour schemes. For Discovery Sport owners who appreciate the details — the kind who notice the difference between a standard cabin and one that's been thoughtfully refined — these strips deliver a meaningful visual upgrade at a fraction of the cost of OEM alternatives. Clean lines, secure adhesion, and a finish that holds its appearance over time. What's Included 🎛️ Steering Wheel Trim Strip 1× silver ABS cover strip, pre-cut to fit Discovery Sport 2015–2019 steering wheel 🔧 Pre-Applied Adhesive 3M-style backing tape pre-fitted — no additional adhesive or tools needed 📋 Fitment Guide Basic installation reference included with the product Product Highlights Precision-manufactured to match the Discovery Sport L550 steering wheel profile exactly Silver chrome-effect finish adds a premium, polished look to the cabin interior High-grade ABS plastic construction — resistant to heat, UV exposure, and daily wear Pre-applied self-adhesive backing ensures a secure, rattle-free installation No drilling, no cutting, and no specialist tools required for fitting Leaves no permanent marks — fully reversible if you choose to remove it Colour-stable finish that resists fading, peeling, and discolouration over time Slim profile integrates seamlessly without altering grip or steering feel 100% brand new — quality inspected before dispatch Compatible with all trim levels of the Discovery Sport 2015–2019 with matching steering wheel Compatibility Vehicle Year Range Trim Level Fitment Land Rover Discovery Sport L550 2015–2019 S, SE, HSE, HSE Luxury Direct Fit Land Rover Discovery Sport L550 2020–2024 (Facelift) All Not Compatible Range Rover Evoque L538 2011–2018 All Not Compatible Range Rover Evoque L551 2019–2024 All Not Compatible Land Rover Discovery 5 L462 2017–2024 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the steering wheel surface is clean and free from dust, oil, or residue. A wipe with isopropyl alcohol on a lint-free cloth is recommended for best adhesion. Allow the steering wheel surface to return to room temperature if the vehicle has been parked in cold conditions — adhesive bonds more effectively above 15°C. Carefully peel the protective backing from the adhesive strip on the trim cover, taking care not to touch the adhesive surface. Align the trim strip against the target section of the steering wheel, confirming correct positioning before making contact. Press firmly and evenly along the full length of the strip for 30–60 seconds to activate the adhesive bond. Allow a minimum of 1 hour before driving to ensure the adhesive has fully cured and the trim is securely seated. Note: Do not apply in direct sunlight or in temperatures below 10°C as this may compromise the adhesive bond. If repositioning is needed, do so within the first 10 seconds of contact before the adhesive sets. Complete Your Discovery Sport Interior Explore the full range of Land Rover Discovery Sport interior accessories at Victorious — crafted for owners who take the details seriously. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our support team before ordering.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Land Rover Discovery Sport 2015–2019 ABS Silver & Black Seat Adjust Button Switch Frame Cover Trim A precision-fit seat adjustment button surround crafted in ABS plastic with a silver and black finish — restoring or upgrading the interior detail of your Discovery Sport in minutes. Discovery Sport L550 2015–2019 ABS Plastic Silver & Black Seat Adjust Trim Direct Fit No Modification Required ISO9001 Manufactured Overview The Land Rover Discovery Sport — introduced in 2015 as an L550-generation compact SUV — brought a refined interior experience to the Discovery family. Over time, the seat adjustment button surrounds are among the first interior details to show wear: the factory plastic develops scuffs, fading, or surface cracking that, while subtle, immediately draws the eye of anyone who cares about their cabin's condition. This seat adjust button switch frame cover trim is engineered specifically for 2015–2019 Discovery Sport models. Constructed from high-grade ABS plastic and finished in a complementary silver and black tone that mirrors the Discovery Sport's factory interior palette, it sits flush against the original button cluster without modification, tools, or fuss. The result is a factory-fresh appearance that looks as though it left the production line that way. Whether you're addressing wear on an older example or simply upgrading the visual detail on a well-maintained Sport, this trim piece delivers a measurable improvement in perceived interior quality. It's the kind of small refinement that Land Rover enthusiasts appreciate — not flashy, simply correct. What's Included 🪄 Seat Adjust Button Frame Cover 1 × ABS silver/black trim piece, precision formed for Discovery Sport 🔲 Pre-Applied Adhesive Backing Double-sided tape included — no separate adhesive required 📋 Installation Guide Step-by-step instructions for a clean, professional result Product Highlights Precision-formed for 2015–2019 Discovery Sport L550 seat button cluster High-grade ABS plastic construction — durable, lightweight, and heat-resistant Silver and black finish mirrors OEM Discovery Sport interior tones Factory-fresh fit — sits flush with no gaps or proud edges Pre-applied double-sided adhesive for a tool-free installation Manufactured in an ISO9001 certified facility for consistent quality Protects underlying button surround from further wear or damage No drilling, cutting, or permanent modification required Resistant to UV fading and daily interior temperature cycles Reversible fitment — removable without marking the original surface Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020 – 2024 Not Confirmed Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Velar L560 2018 – 2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature — avoid fitting in direct sunlight or a cold garage, as extreme temperatures affect adhesive performance. Thoroughly clean the existing seat adjust button surround using an isopropyl alcohol wipe or interior-safe panel cleaner. Allow to dry completely — at least 3–5 minutes. Dry-fit the trim cover over the button cluster to confirm alignment and orientation before committing to adhesion. Peel the backing from the pre-applied double-sided tape, taking care not to touch the adhesive surface. Align the trim piece over the button cluster and press firmly from the centre outward, applying steady pressure for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure for a minimum of 24 hours before subjecting the trim to any stress or cleaning. ⚠ Note: Ensure the surface is completely free of polish residue, silicone-based protectants, or moisture prior to application. These will significantly reduce adhesive bond strength and may cause the trim to lift prematurely. Elevate Every Detail The best Land Rover interiors are defined by consistency — every surface, every surround, every switch cluster finished to the same standard. Browse the full Discovery Sport interior collection at Victorious Automotive and keep your cabin exactly as it should be. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Co-Pilot Armrest Storage Box Hook Cover Trim – Land Rover Discovery Sport 2015–2019 | ABS Silver A precisely engineered ABS silver trim cover that elevates the passenger-side armrest area of your Discovery Sport with a clean, factory-finish aesthetic — fitted in minutes, no tools required. Discovery Sport 2015–2019 ABS Silver Interior Trim Co-Pilot Armrest Storage Box Hook Cover Direct Fit No Drilling Required 100% Brand New Overview The Land Rover Discovery Sport — produced between 2015 and 2019 — struck a balance between genuine capability and refined cabin comfort. Owners of this generation know their vehicle well: they care about every detail, and the interior is no exception. The passenger-side armrest and storage box area is one of the most frequently used zones in the cabin, yet in standard trim it can feel understated compared to the rest of the vehicle's design language. This Co-Pilot Armrest Storage Box Hook Cover Trim is designed to address exactly that. Crafted from high-quality ABS plastic in a polished silver finish, it replaces the plain factory surround with a trim piece that adds visual depth and a more premium character to the centre console area. The silver tone is neutral and complementary — working equally well with black, grey, and light interior colourways found across the Discovery Sport range. Installation is straightforward and non-destructive. The trim is backed with automotive-grade double-sided adhesive tape, meaning it bonds securely to the factory surface without any drilling, cutting, or permanent modification. Whether you're refreshing a well-used interior or simply looking to add a more considered finish, this is one of the most impactful and accessible upgrades available for your Discovery Sport. What's Included 🪄 Armrest Storage Box Hook Cover Trim 1 × ABS Silver trim piece, precision moulded for Discovery Sport 2015–2019 🔲 Pre-Applied Adhesive Backing Automotive-grade double-sided tape pre-fitted to reverse of trim 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-moulded ABS plastic construction for a confident, rigid fit Polished silver finish that reads as a premium interior detail Designed specifically for the Discovery Sport 2015–2019 interior layout Pre-applied automotive-grade adhesive — no tools or hardware needed Non-destructive installation preserves the factory interior completely Lightweight design adds no meaningful weight to the vehicle Neutral silver tone complements black, grey and beige interior colourways Resistant to everyday wear, UV light, and interior temperature fluctuations Supplied brand new in protective packaging to prevent transit damage Easily removable with zero damage if you ever wish to revert to stock Compatibility Vehicle Year Range Trim Level Fitment Land Rover Discovery Sport 2015 All Trim Levels Direct Fit Land Rover Discovery Sport 2016 All Trim Levels Direct Fit Land Rover Discovery Sport 2017 All Trim Levels Direct Fit Land Rover Discovery Sport 2018 All Trim Levels Direct Fit Land Rover Discovery Sport 2019 All Trim Levels Direct Fit Land Rover Discovery Sport (Facelift) 2020–2024 All Trim Levels Not Confirmed Range Rover Evoque L538 2011–2018 All Trim Levels Not Compatible Land Rover Freelander 2 All Years All Trim Levels Not Compatible If your vehicle year or specification is not listed above, please contact us on +44 203 943 9919 before ordering — we're happy to confirm fitment. Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Begin by thoroughly cleaning the target surface on the co-pilot armrest storage box area using an isopropyl alcohol wipe or similar degreaser. Allow to dry completely — adhesion is significantly improved on a clean, grease-free surface. Dry-fit the trim piece to the mounting area without removing the adhesive backing. Confirm alignment and positioning before committing — check all edges sit flush with no gaps. Once satisfied with alignment, peel back the protective liner from the adhesive tape on the reverse of the trim piece. Carefully position the trim piece and press firmly onto the surface, working from the centre outward to eliminate any air pockets. Apply sustained pressure for 30–60 seconds across the full surface area. Allow the adhesive to cure for a minimum of 1 hour before exposing the area to significant movement or temperature change. Full cure is typically achieved within 24 hours. ⚠ Important: Do not install in cold ambient temperatures below 10°C — adhesive performance is reduced in cold conditions. Warm the surface slightly using a heat gun or hair dryer if fitting in cool weather, and allow to cure at room temperature where possible. Complete Your Discovery Sport Interior This trim piece is just the beginning. Explore our full collection of Land Rover Discovery Sport interior and exterior accessories — all curated and quality-checked by our team of Land Rover specialists. Shop Discovery Sport Accessories → Buying two items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used for identification and fitment purposes only. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Aluminum Alloy Silver Center Console Side Cover for Land Rover Discovery Sport 2015–2019 A precision-cut aluminum alloy upgrade that replaces tired plastic trim with a clean, brushed-silver finish — purpose-built for the Discovery Sport L550 interior. Discovery Sport L550 2015–2019 Aluminum Alloy Silver Finish Center Console No-Drill Fit 2-Piece Set Interior Trim Overview The Land Rover Discovery Sport (L550, 2015–2019) occupies a unique space in the Land Rover lineup — compact enough for daily use, capable enough for genuine off-road work, and refined enough to stand alongside its larger siblings. Owners who care about their vehicle's interior know that the factory plastic trim around the center console is one of the first areas to show wear, scuffs, and fading over time. It's a small detail, but in a cabin you spend hours in, it matters. These aluminum alloy center console side covers are designed as a direct, no-compromise replacement for that factory plastic trim. Manufactured from high-grade aluminum alloy with a clean brushed silver finish, they introduce a level of material quality to the cabin that feels genuinely premium — not an afterthought. The geometry is engineered specifically for the 2015–2019 Discovery Sport, meaning the panel edges, mounting points, and overall profile align precisely with OEM fitment tolerances. Installation requires no drilling, no modifications, and no specialist tools. Each cover is pre-fitted with strong double-sided automotive-grade adhesive tape on the reverse, allowing for a flush, rattle-free bond to the existing console surface. The result is an interior upgrade that looks factory-fitted while delivering a material and visual step up from the original plastic. What's Included 🔲 Console Side Cover × 2 Left and right panels, matched pair 🔧 Pre-Applied Adhesive Automotive-grade double-sided tape fitted to each cover 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Manufactured from high-grade aluminum alloy for long-lasting durability Brushed silver finish adds a refined, premium aesthetic to the cabin Precision-cut to match the exact profile of the Discovery Sport L550 console Pre-applied automotive-grade adhesive for a clean, tool-free installation No drilling, cutting, or permanent modification required Covers both left and right sides — complete set of 2 panels Resistant to daily wear, UV exposure, and temperature fluctuations Flush-fit design sits level with surrounding trim for a factory appearance Lightweight construction adds negligible weight to the vehicle interior Compatible with all trim levels and engine variants for 2015–2019 model years Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 (Facelift & Pre-Facelift) 2015–2019 Direct Fit Land Rover Discovery Sport L550 (2020 Facelift onwards) 2020–present Not Compatible Land Rover Discovery 5 L462 2017–present Not Compatible Range Rover Evoque L538 2011–2019 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Begin with the vehicle stationary and the center console area clean and dry. Use an isopropyl alcohol wipe to thoroughly degrease the surface areas where the covers will be bonded — this is critical for adhesive performance. Allow the cleaned surface to dry completely for 2–3 minutes before proceeding. Dry-fit each cover without removing the adhesive backing to confirm correct alignment, panel orientation (left and right), and edge flush with surrounding trim. Once satisfied with the fit, peel the protective film from the adhesive tape on the first cover. Carefully align the cover with the console surface and press firmly into position, applying even pressure across the full panel for 30–60 seconds. Repeat for the second cover on the opposite side. Allow a minimum of 2 hours before subjecting the covers to heavy contact or movement. Full adhesive cure is typically achieved within 24 hours at room temperature. ⚠ Note: Do not attempt installation in cold or damp conditions — adhesive performance is significantly reduced below 10°C. Ensure the cabin is at ambient room temperature for best results. If in doubt, contact us before fitting. Upgrade Your Discovery Sport Interior Small details define a well-kept cabin. These aluminum alloy console covers are one of the simplest, most impactful upgrades you can make to your 2015–2019 Discovery Sport — browse the full Discovery Sport accessories collection for more. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and brand references are used solely for compatibility identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Land Rover Discovery Sport Rear Reading Light Frame Cover Trim – ABS Silver & Carbon Fibre (2015–2019) A precision-crafted interior trim upgrade that transforms the rear overhead reading light surround of your Discovery Sport into a refined, bespoke-feeling finish — no tools, no modification, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Carbon Fibre Finish Silver Finish Interior Trim Reading Light Cover Adhesive Fit 2-Piece Set Overview The Land Rover Discovery Sport (2015–2019) is a capable, refined family SUV that balances everyday versatility with genuine off-road credibility. Inside, the cabin is well-appointed — but like many vehicles in this class, the factory overhead console and reading light surrounds are finished in plain, unpainted plastic that can look underwhelming against an otherwise well-equipped interior. It's one of those small details that Discovery Sport owners notice once they start improving the cabin. These rear reading light frame cover trims are designed to sit flush over the existing surround, covering the factory plastic with a precisely formed ABS shell finished in either satin silver or carbon fibre texture. The result is a clean, intentional look that feels like it belongs — not an aftermarket addition, but a detail you'd expect to find on a higher specification trim level. Available in two finishes to suit both classic Land Rover interior palettes and more contemporary, sportier cabin aesthetics. Installation requires no drilling, no wiring, and no specialist tools. Each piece is pre-fitted with automotive-grade double-sided adhesive on the reverse, allowing for accurate placement and a long-lasting bond. Whether you're refreshing a tired interior or working through a wider cabin upgrade, these covers are a low-effort, high-impact improvement that every Discovery Sport owner should consider. What's Included 💡 Rear Reading Light Frame Covers 2 pieces per set — left and right surrounds 🔲 Pre-Applied Adhesive Backing Automotive 3M-style double-sided tape included 📄 Installation Guidance Basic fitting instructions included in packaging Product Highlights Precision-moulded ABS plastic construction for a factory-accurate fit Available in satin silver and carbon fibre texture finishes Pre-applied automotive-grade adhesive for tool-free installation Covers factory plastic surround with a seamless, flush profile Elevates rear cabin ambience with minimal effort Resistant to UV discolouration and everyday interior wear Lightweight — adds no meaningful weight to the headliner area Does not obstruct reading light function or lens Supplied as a matched pair for consistent left/right finish 100% brand new — packaged and quality-checked before dispatch Compatibility Vehicle Code Years Fit Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 2020 – 2024 Not Compatible Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Begin with the interior at room temperature — cold cabins can reduce initial adhesive bond strength. Park in a garage or allow the vehicle to warm slightly if working in cold conditions. Clean the existing reading light surround thoroughly using an isopropyl alcohol wipe or lint-free cloth. Remove any dust, oils, or residue from the factory plastic surface and allow to dry completely. Dry-fit each cover piece into position without removing the adhesive backing — confirm alignment, light clearance, and panel edge contact before committing. Peel back the adhesive liner from the first cover piece. Align carefully with the surround edges and press firmly into position, applying sustained hand pressure for 30–60 seconds across the full surface. Repeat for the second cover piece, confirming symmetry between the left and right sides before pressing down. Allow 24 hours for the adhesive bond to fully cure before exposing the area to significant vibration, cleaning products, or temperature extremes. ⚠ Note: Do not stretch or force the covers into position — each piece is moulded specifically for the 2015–2019 Discovery Sport surround profile. Applying excessive pressure at the edges before the centre is set may cause misalignment. If repositioning is required, do so within the first few seconds of placement before the adhesive sets. Complete Your Discovery Sport Interior Browse the full range of Land Rover Discovery Sport interior and exterior accessories at Victorious Automotive — curated specifically for owners who care about the details. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Land Rover® and Discovery Sport® are registered trademarks of Jaguar Land Rover Limited.

Product Description Enhance the interior of your vehicle with our Aluminum Alloy Red Car Air Conditioning Audio Knobs Ring Cover Trim. Designed for a sleek, modern look, these accessories perfectly fit your vehicle's controls, offering a touch of luxury and style. Product Highlights High-quality aluminum alloy construction for durability. Available in Red, Silver, and Black to match your style. Easy installation with a snug fit for seamless integration. Crafted in an ISO9001 certified facility ensuring top-tier quality. Designed to fit models from 2015-2019. Product Specifications Material: Aluminum Alloy Colors: Red, Silver, Black Compatibility: 2015-2019 Models Package Includes 4 x Knob Ring Covers Notes Items over €150 shipped to European countries may incur custom taxes. Please be aware that buyers are responsible for these fees. If you have any questions, don't hesitate to contact us for assistance.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim ABS Silver Front Seat Belt Cover Trim Sticker for Land Rover Discovery Sport 2015–2021 A precision-crafted silver ABS trim piece that wraps your Discovery Sport's front seat belt surrounds in a clean, polished finish — lifting the cabin aesthetic with zero permanent modification. Discovery Sport L550 2015–2021 ABS Plastic Silver Finish Seat Belt Trim No Drilling Required Direct Fit Interior Upgrade Overview The Land Rover Discovery Sport L550 (2015–2021) is one of the most capable and well-appointed compact SUVs Land Rover has ever produced. Its interior strikes a balance between practicality and refinement — but the seat belt pillar surrounds, finished in standard black plastic, can feel at odds with owners who have invested in upgrading the rest of their cabin. It's a small detail, but in a well-maintained interior, small details are exactly what define the overall impression. These ABS Silver Front Seat Belt Cover Trim Stickers are designed to address that gap. Contoured to sit flush against the seat belt anchor pillars on both front seats, they introduce a consistent silver metallic accent that ties naturally into the Discovery Sport's interior trim language — particularly in vehicles specced with silver or brushed finishes elsewhere in the cabin. The high-gloss ABS surface is smooth, uniform, and resistant to the everyday wear that comes with regular use. Installation is entirely adhesive-based, meaning there is no drilling, no clipping, and no risk of damage to existing plastics. The double-sided tape backing creates a firm, rattle-free bond when applied correctly to a clean surface. For Discovery Sport owners who want a factory-quality result without workshop time, this is one of the most straightforward interior upgrades available. What's Included 🪄 Seat Belt Cover Trims × 2 Left and right front seat belt surrounds, silver ABS finish 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-fitted to each trim piece Product Highlights Precision-moulded ABS plastic for a consistent, factory-quality profile on both front seat belt pillars High-gloss silver finish complements chrome, silver, and brushed metallic interior accents throughout the Discovery Sport cabin Pre-applied double-sided adhesive ensures a firm, vibration-free bond with no tools required Specifically sized and shaped for the Discovery Sport L550 front seat belt surrounds — not a generic fit Lightweight construction adds no perceivable mass and does not interfere with belt operation ABS material is resistant to UV fading, heat distortion, and surface scratching under normal cabin conditions Reversible installation — trim pieces can be carefully removed without damaging factory plastics underneath Paired set covers both driver and front passenger seat belt positions for a symmetrical, finished result No drilling, cutting, or modification to factory components required at any stage of installation A low-cost, high-impact interior detail that elevates cabin presentation without a full interior refresh Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery Sport L550 2015–2021 Direct Fit Land Rover Discovery Sport L550 Facelift 2019–2021 Direct Fit Land Rover Discovery Sport L550 (2022+) 2022–Present Verify Before Purchase Range Rover Evoque L538 First Generation 2011–2018 Not Compatible Range Rover Evoque L551 Second Generation 2019–Present Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 minutes  ·  🔧 Tools Required: None Begin with the vehicle parked in a clean, well-lit environment. Ensure the interior temperature is comfortable — adhesive bonds most effectively between 15°C and 30°C. Thoroughly clean both front seat belt pillar surfaces using an isopropyl alcohol wipe or a clean microfibre cloth lightly dampened with IPA. Remove all dust, grease, and any existing residue. Allow to dry completely before proceeding. Before committing, dry-fit each trim piece against its corresponding pillar to confirm alignment and orientation. The trims are not identical — check left versus right positioning carefully. Peel the protective backing from the double-sided adhesive on the first trim piece. Align carefully with the seat belt surround area and press firmly into position, applying even pressure across the full surface for 30–60 seconds. Repeat the process for the second trim piece on the opposite side, maintaining the same alignment approach for a symmetrical result. Allow the adhesive to fully cure for a minimum of 24 hours before subjecting the trims to any stress, cleaning, or extreme temperature exposure. ⚠ Important: Do not attempt to install on a cold or damp surface. Adhesive performance is significantly reduced below 10°C or on surfaces that retain moisture. Skipping the surface-cleaning step is the most common cause of poor adhesion — do not rush this stage. Complete Your Discovery Sport Interior Browse the full range of Land Rover Discovery Sport interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If you are unsure, contact our team before ordering.

Victorious Automotive · Land Rover Discovery 4 · Exterior Heated Rearview Mirror Glass Lenses for Land Rover Discovery 4 LR4 (2010–2013) Direct-fit heated mirror glass lenses that eliminate condensation and frost, restoring clear all-weather visibility to your Discovery 4 LR4. Discovery 4 LR4 2010–2013 Heated Glass Frost-Free Direct Fit ABS Construction Exterior Upgrade Sold Individually Overview The Land Rover Discovery 4 LR4 is a capable and composed machine — equally at home on motorway miles and demanding off-road terrain. But cold mornings, damp conditions, and rapid temperature changes can leave your door mirrors fogged or frost-covered, compromising rear visibility at the exact moment you need it most. That's a compromise no Discovery 4 owner should have to accept. These heated rearview mirror glass lenses are precision-manufactured to fit the Discovery 4 LR4 produced between 2010 and 2013. The integrated heating elements activate alongside your vehicle's existing heated mirror function, rapidly clearing condensation and ice from the mirror surface without any modification to your existing wiring. The result is clear, undistorted visibility in all weather conditions — every time you pull out of the driveway. Built from high-grade ABS plastic with optically correct glass, these lenses are a straightforward like-for-like replacement for worn, cracked, or delaminated originals. Whether you're replacing a damaged mirror or simply upgrading to a more reliable component, this is the clean, sensible solution built for Discovery owners who expect their vehicle to perform in every condition. What's Included 🪞 Heated Mirror Glass Lens 1 × lens with integrated heating element 🔌 Pre-Wired Heating Connector Plug-and-play connection to factory wiring 📦 Protective Packaging Individually packaged for safe transit Product Highlights Integrated heating elements eliminate condensation and frost rapidly in cold weather Optically correct glass provides clear, undistorted rear and side visibility Precision-manufactured for direct OEM-style fitment on Discovery 4 LR4 models Compatible with factory heated mirror switch — no additional wiring required High-grade ABS housing resists impact, UV degradation, and temperature extremes Like-for-like replacement for worn, cracked, or delaminated mirror glass Sold individually — replace one or both mirrors as needed Brand new condition — not a refurbished or reconditioned component Manufactured in an ISO9001 certified facility for consistent quality control Straightforward DIY installation requiring no specialist tools or equipment Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 4 LR4 / L319 2010 – 2013 Direct Fit Land Rover Discovery 4 LR4 / L319 2014 – 2016 Verify Before Purchase Land Rover Discovery 3 LR3 / L319 2004 – 2009 Not Compatible Land Rover Discovery 5 L462 2017 – Present Not Compatible Range Rover Sport L320 2005 – 2013 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: Trim removal tool, clean cloth Ensure the vehicle is parked on a level surface with the ignition off and the mirror heating system deactivated before beginning work. Carefully insert a plastic trim removal tool or flat-blade screwdriver (wrapped in tape) around the edge of the existing mirror glass to release the retaining clips without damaging the mirror housing. Gently pull the old mirror glass forward and away from the housing, taking care not to stress or detach the heating connector at the rear. Disconnect the factory heating connector from the back of the old mirror glass lens — note the orientation before removing. Connect the factory heating connector to the corresponding plug on the new heated mirror glass lens, ensuring a firm and secure connection. Carefully align the new mirror glass with the housing and press firmly until the retaining clips engage and the glass sits flush. Test the heated mirror function using the vehicle's interior controls to confirm correct operation before completing the installation. ⚠ Note: This listing is for one (1) mirror glass lens. If replacing both driver and passenger side mirrors, please order two units. If you are unsure of your exact variant or build date, contact our team at +44 203 943 9919 before ordering. Complete Your Discovery 4 Build Browse our full range of Land Rover Discovery 4 accessories — from exterior upgrades to interior refinements — all curated for LR4 owners who demand quality and precision. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 · Exterior Accessories Stainless Steel Rear Tailgate Radio Antenna Bracket Base — Land Rover Discovery 4 (2010–2016) A precision-formed stainless steel antenna bracket base engineered to restore or upgrade the tailgate-mounted antenna mount on your Discovery 4 — delivering lasting corrosion resistance and a clean, factory-consistent finish. Discovery 4 · L319 2010–2016 Stainless Steel Black Finish Rear Tailgate Radio Antenna Direct Fit Screw Fix 100% Brand New Overview The Land Rover Discovery 4 (L319) is one of the most capable and enduring off-road SUVs ever produced — a vehicle that demands accessories built to match its reputation for toughness. Whether your original antenna bracket base has succumbed to corrosion, sustained physical damage during off-road use, or simply needs replacing as part of a tailgate refresh, getting the right component matters. A poorly fitted or rusted bracket not only looks out of place but can compromise antenna signal performance and allow water ingress around the tailgate panel. This stainless steel rear tailgate radio antenna bracket base has been designed specifically for the Discovery 4, ensuring a precise, direct-fit installation to the existing mounting points on the tailgate. Formed from high-grade stainless steel with a smart black finish, it replicates the OEM mounting position exactly — keeping your radio antenna securely seated and correctly aligned whether you're on the motorway or deep in the field. Unlike cheaper pressed steel or plastic alternatives, the stainless steel construction here means genuine long-term resistance to rust, road salt, and the elements — exactly what Discovery 4 owners who use their vehicles as intended should expect. It's a small component that makes a real difference to the cleanliness and functionality of your tailgate area. What's Included 📡 Antenna Bracket Base × 1 Stainless steel, black finish — rear tailgate mount 🔩 Fixing Hardware Screw fixation system for secure tailgate attachment 📄 Installation Guide Basic fitting reference included Product Highlights Precision-engineered for the Discovery 4 (L319) rear tailgate antenna mount position High-grade stainless steel construction for maximum corrosion resistance Sleek black finish complements the Discovery 4's exterior trim and bodywork Direct-fit replacement — aligns with existing OEM mounting points, no modification required Screw fixation system ensures a secure, rattle-free installation Maintains correct antenna positioning for optimal radio signal reception Protects the tailgate panel from water ingress around the antenna aperture Suitable for all Discovery 4 variants across the full 2010–2016 production run 100% brand new — not a remanufactured or reconditioned part Manufactured in a quality-certified facility to strict dimensional and finish tolerances Compatibility Vehicle Code Years Trim / Engine Fit Land Rover Discovery 4 L319 2010–2016 All Trim Levels — 3.0 TDV6, 5.0 V8 Direct Fit Land Rover Discovery 3 L319 2004–2009 All Variants Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 All Variants Not Compatible Range Rover Sport L494 L494 2013–2022 All Variants Not Compatible Range Rover Vogue L405 L405 2013–2021 All Variants Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 15–30 Minutes  ·  🛠 Tools Required: Screwdriver Set Open the Discovery 4 rear tailgate fully and ensure the vehicle is on a stable, level surface with the ignition off. Carefully disconnect the existing antenna cable from the old bracket base. Take note of the routing before removal. Remove the existing antenna bracket base by undoing the retaining screws using the appropriate screwdriver — keep fixings safe for reference. Clean the mounting area on the tailgate panel to remove any residue, corrosion, or sealant from the previous bracket. Position the new stainless steel bracket base over the tailgate aperture, aligning it precisely with the existing mounting holes. Secure the bracket using the supplied screw fixings — tighten evenly to ensure a flush, rattle-free fit without overtightening. Reconnect the antenna cable, ensuring it follows the original routing through the tailgate panel. Test radio reception on multiple frequencies to confirm the antenna is correctly seated and signal is unimpaired. ⚠ Note: Always verify your Discovery 4's build year and tailgate configuration before installation. If your vehicle has a pre-facelift or late-production tailgate variant, minor dimensional differences may exist. If in doubt, contact our team on +44 203 943 9919 before fitting. Complete Your Discovery 4 Build Browse our full range of Discovery 4 exterior accessories — curated specifically for L319 owners who demand quality, fitment accuracy, and lasting durability from every component they fit. Shop All Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes. Please verify fitment with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery · Exterior Trim Black TPE Windshield Wiper Bottom Trim Panel for Land Rover Discovery 3 & 4 / LR3 & LR4 (2004–2016) A precision-formed TPE trim panel that seals and refines the base of the windshield scuttle area — restoring a factory-fresh finish to your Discovery's glasshouse and protecting against water ingress and UV degradation. Discovery 3 / LR3 Discovery 4 / LR4 2004–2016 TPE Material Direct Fit Double-Sided Adhesive ISO 9001 Certified Gloss Black No Drilling Required 2-Piece Set Overview The Land Rover Discovery 3 and Discovery 4 — spanning model years 2004 through 2016 — are among the most capable and enduring SUVs ever produced. Whether you run yours as a daily driver, a towing workhorse, or a weekend off-road tool, the exterior trim around the windshield base is one of the first areas to show wear. Constant exposure to road wash, UV rays, and seasonal temperature swings causes the original panel to fade, crack, and lift — leaving an unsightly gap that can also allow water to track into the scuttle tray. This replacement windshield wiper bottom trim panel is manufactured from high-grade TPE (thermoplastic elastomer) — a material chosen specifically for its balance of rigidity and flex. Unlike cheaper ABS alternatives, TPE retains its deep gloss-black finish under prolonged sun exposure and resists the micro-cracking that plagues plastic trims in cold climates. The pressed edge profile is engineered to mirror the OEM contour of the Discovery 3 and 4 scuttle line, sitting flush against the glass and bodywork without any visible gaps. Installation requires no specialist tools and no drilling — the panel bonds via a pre-applied double-sided automotive adhesive tape that provides a permanent, vibration-resistant hold. If you're refreshing a tired exterior or simply bringing your Discovery back to standard appearance before a sale or service, this trim panel delivers a clean, confident result in under fifteen minutes. What's Included 🪟 TPE Windshield Trim Panel × 2 Left and right sections — full lower windshield coverage 🔲 Pre-Applied Adhesive Backing Double-sided automotive-grade tape included on each piece 📄 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Premium TPE construction resists UV fading, cracking, and warping over years of use Pressed edge profile mirrors the OEM scuttle line geometry of the Discovery 3 and 4 Pre-applied double-sided automotive adhesive — no additional materials required Gloss black finish complements factory trim across all Discovery exterior colour options Flexible material conforms to minor surface variations for a gap-free fitment Protects the scuttle tray area from water ingress and debris accumulation No drilling, cutting, or specialist tools required for installation ISO 9001 certified manufacturing process ensures consistent quality control Supplied as a full 2-piece set covering both the driver and passenger sides Compatible with all trim levels of Discovery 3 (2004–2009) and Discovery 4 (2010–2016) Compatibility Model Market Code Year Range Fit Land Rover Discovery 3 LR3 (L319) 2004–2009 Direct Fit Land Rover Discovery 4 LR4 (L319) 2010–2016 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Land Rover Freelander 2 L359 2006–2014 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–20 minutes  ·  🔧 Tools Required: None Ensure the vehicle is parked on a level surface with the wipers in the parked (down) position and the ignition off. Thoroughly clean the lower windshield trim area using an isopropyl alcohol wipe or panel prep solution. Remove all old adhesive residue, dirt, wax, and moisture. Allow to dry completely. Dry-fit each TPE trim panel against the scuttle line to confirm alignment and position before committing to adhesive bond. Peel the protective liner from the double-sided adhesive tape on the rear of the first panel. Starting from the centre of the panel, press firmly along the length of the trim, working outwards to avoid air pockets or misalignment. Apply firm hand pressure for 30–60 seconds along the entire panel edge. Repeat the process for the second panel on the opposite side, ensuring both panels are evenly aligned and flush with the glass. Allow the adhesive to cure for a minimum of 2 hours before operating the wipers or washing the vehicle. ⚠ Important: Do not attempt installation in temperatures below 5°C or above 35°C, as adhesive bond strength may be compromised. Avoid washing the vehicle for at least 24 hours after installation for maximum adhesive cure. If your original trim has caused any paint damage beneath, address this before fitting the new panel. Complete Your Discovery's Exterior Browse the full range of exterior trim, protection, and styling accessories for your Land Rover Discovery 3 and Discovery 4 at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 4 Accessories   Shop Discovery 3 Accessories Use code 22GET20  for 20% off when you purchase any 2 items. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team at +44 203 943 9919.

Victorious Automotive · Land Rover Discovery 4 · Exterior Trim ABS Chrome Rear Window Wiper Nozzle Cover Trim — Land Rover Discovery 4 LR4 (2010–2016) A precision-fitted chrome nozzle cover trim that adds a polished, factory-refined finish to the rear wiper assembly of your Discovery 4 — no drilling, no fuss. Discovery 4 LR4 2010–2016 ABS Chrome Exterior Trim Adhesive Fit Rear Wiper 2-Piece Set No Drilling Overview The Land Rover Discovery 4 LR4 is a vehicle that commands presence — a no-compromise SUV built for those who demand capability without sacrificing refinement. Whether it's navigating urban streets or challenging terrain, every detail of the D4 contributes to its commanding character. The exterior deserves the same level of attention that Land Rover put into its engineering. This chrome rear window wiper nozzle cover trim is crafted from high-grade ABS plastic with a silver chrome finish, designed to seamlessly cover and enhance the rear wiper nozzle area — one of the few exterior details that often goes overlooked. The mirror-like chrome surface integrates naturally with the Discovery 4's existing trim lines, elevating the overall aesthetic without appearing aftermarket. Installation requires nothing more than a clean surface and the included double-sided adhesive — no tools, no modifications, no compromise to your vehicle's bodywork. It's a subtle upgrade with an immediate visual impact, particularly appreciated by owners who take pride in every inch of their Discovery. What's Included ✦ Chrome Nozzle Cover Trim ×2 ABS chrome-finished rear wiper cover pieces 🔧 Pre-Applied Adhesive Double-sided tape pre-fitted for easy install 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-formed ABS plastic for long-term structural integrity High-gloss silver chrome finish resists fading and tarnishing Specifically designed for Discovery 4 LR4 wiper nozzle geometry Double-sided adhesive backing ensures a firm, lasting bond No drilling, cutting, or permanent modification required 2-piece set provides full coverage of the rear nozzle area Complements existing chrome exterior trim on the Discovery 4 100% brand new — manufactured in a quality-certified facility Lightweight construction adds no meaningful weight to the tailgate Weather-resistant finish suitable for all climates and conditions Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Not Confirmed Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Thoroughly clean the rear wiper nozzle area using an alcohol-based surface cleaner or isopropyl wipe. Remove any wax, grease, or road grime to ensure maximum adhesion. Allow the surface to dry completely before proceeding. Do not apply in temperatures below 10°C / 50°F — the adhesive performs best in moderate to warm ambient conditions. Test-fit both trim pieces against the nozzle area without removing the adhesive backing to confirm correct positioning and alignment. Peel back the adhesive protective film from the first piece and carefully align it to the nozzle. Press firmly for 30–60 seconds, applying even pressure across the full surface. Repeat for the second piece. Once applied, avoid washing the vehicle or exposing the trim to sustained water pressure for at least 24 hours to allow the adhesive to cure fully. ⚠ Note: Ensure both pieces are correctly positioned before pressing firmly — repositioning after adhesive contact may reduce bonding strength. If in doubt, use a mild heat gun on the lowest setting to slightly warm the adhesive before final placement for improved flexibility. Explore the Full Discovery 4 Collection This chrome trim is just one of dozens of precision accessories available for the Land Rover Discovery 4. Browse the complete range at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 · Exterior Trim Stainless Steel Front Bumper Sill Plate Protector Trim — Land Rover Discovery 4 LR4 (2014–2017) A precision-formed stainless steel bumper sill protector that shields your Discovery 4's front lower bumper from road debris and scuffs — while adding a clean, purposeful finish to the exterior. Discovery 4 LR4 2014–2017 Stainless Steel Front Bumper Sill Protector Silver & Black Finish No-Drill Fit ISO9001 Certified Overview The Land Rover Discovery 4 — sold as the LR4 in North American markets — is a vehicle built around capability without compromise. Whether you're navigating urban streets or tackling trails, the front bumper area is one of the first surfaces to attract stone chips, kerb scuffs, and general wear. Over time, that lower bumper lip tells a story you'd rather not display. This stainless steel front bumper sill plate protector is engineered specifically for the 2014–2017 Discovery 4 facelift generation, covering the lower front bumper lip with a contoured panel that follows the original body lines precisely. Available in both brushed silver and gloss black finishes, it integrates naturally with the Discovery 4's exterior aesthetic without looking like an afterthought. Constructed from high-grade stainless steel to ISO9001 manufacturing standards, this trim piece is resistant to corrosion, road salt, and UV degradation. The double-sided adhesive backing ensures a firm, rattle-free bond that requires no drilling, cutting, or modifications to your vehicle's bodywork whatsoever. What's Included 🛡️ Front Bumper Sill Plate 1 × stainless steel protector panel, pre-cut to fit 🔧 Adhesive Backing Pre-applied industrial double-sided tape 🧹 Surface Prep Wipe Alcohol cleaning pad for optimal adhesion 📄 Fitting Guide Basic illustrated installation reference Product Highlights Precision-formed to match the Discovery 4 LR4 front bumper profile exactly High-grade stainless steel resists corrosion, road salt, and UV exposure Available in brushed silver and gloss black to suit your exterior colour ISO9001 certified manufacturing for consistent quality and dimensional accuracy No drilling, cutting, or permanent modification required Industrial double-sided adhesive provides a firm, rattle-free bond Protects lower bumper lip from stone chips, kerb scuffs, and debris Retains factory look while adding a purposeful, premium finish Suitable for both daily drivers and weekend-use Discovery 4s Brand new and ready to install straight from the box Compatibility Vehicle Generation Years Fit Land Rover Discovery 4 / LR4 L319 Facelift 2014–2017 Direct Fit Land Rover Discovery 4 / LR4 L319 Pre-Facelift 2009–2013 Not Confirmed Land Rover Discovery 3 / LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your Discovery 4 on a level surface and allow the front bumper area to reach ambient temperature — avoid fitting in direct sunlight or in cold conditions below 10°C for best adhesive performance. Thoroughly clean the lower front bumper sill surface using the included alcohol prep wipe. Remove all dust, grease, wax, and road film, then allow the surface to dry completely for at least 5 minutes. Dry-fit the sill plate protector against the bumper without removing the adhesive liner. Confirm alignment with the bumper edges and note any reference points. Peel back a small section of the adhesive liner from one end of the panel. Carefully align and press that end firmly into position on the bumper surface. Slowly peel the remaining adhesive liner away while pressing the panel progressively across the bumper, working from one side to the other to avoid air pockets or misalignment. Apply firm, even pressure along the entire length of the panel for 30–60 seconds, paying particular attention to the edges and corners. Allow the adhesive to cure undisturbed for a minimum of 24 hours before washing the vehicle or exposing the panel to prolonged moisture. ⚠ Important: Do not attempt installation on a wet, waxed, or recently polished bumper surface — adhesion will be significantly compromised. If your vehicle has been recently resprayed, allow paint to cure for a minimum of 30 days before fitting adhesive trim pieces. More for Your Discovery 4 Explore our full range of exterior accessories designed specifically for the Land Rover Discovery 4 LR4 — from door sill guards to mirror covers and bonnet trim strips. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.