Best selling products

Victorious Automotive · Range Rover Sport L494 · Interior Accessories Suede Gear Shift Knob Cover for Range Rover Sport L494 (2014–2021) A precision-fit suede gear knob cover that restores tactile refinement and protects your original shift knob — available in stealth Black or bold Red. Range Rover Sport L494 2014–2021 Premium Suede Direct Fit Black / Red Interior Upgrade No Drilling Required Sport Interior Overview The Range Rover Sport L494 is a vehicle that commands presence — both on the road and inside the cabin. Its interior is a space where material quality is immediately felt, and every touchpoint matters. For owners who use their Sport daily, the gear shift knob is one of the most frequently contacted surfaces in the cabin, and over time, original finishes can show wear that simply doesn't belong in a vehicle of this calibre. This Suede Gear Shift Knob Cover is designed specifically for the L494 Range Rover Sport, covering the 2014 through to the 2021 model year. Crafted from soft, tactile suede, it wraps the original knob with a material that is both visually refined and genuinely pleasant to hold — adding grip, warmth, and a sense of understated luxury that suits the Sport's performance-orientated character. The fit is precise and clean. Whether you choose the classic Black for a seamless match with most Sport interiors or opt for the Red variant to introduce a subtle sporting contrast, the cover sits flush and secure without the need for tools, adhesives, or professional installation. It's one of the simplest upgrades you can make to the Sport cabin — and one of the most noticeable. What's Included 🎁 Suede Gear Shift Knob Cover 1 x cover in your chosen colour — Black or Red 📋 Fitment Guide Basic installation reference included in packaging 📦 Protective Packaging Securely packed to arrive in perfect condition Product Highlights Precision-engineered fit for Range Rover Sport L494 (2014–2021) Soft suede material delivers superior grip and tactile comfort Available in Black for a refined look or Red for a sporting edge Protects original gear knob finish from daily wear and abrasion Tool-free installation — no adhesive, drilling, or modifications required Snug slip-on design stays firmly in place during normal driving Suede surface remains comfortable in both warm and cold conditions Elevates the tactile quality of the Sport's interior touchpoints Low-profile design preserves the original knob silhouette and ergonomics Durable construction designed to maintain appearance over extended use Compatibility Vehicle Model Code Years Fit Range Rover Sport L494 2014 – 2021 Direct Fit Range Rover Sport L461 (2022+) 2022 – 2026 Not Compatible Range Rover Vogue L405 2013 – 2021 Not Confirmed Range Rover Velar P538 2018 – 2022 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 2–5 Minutes  ·  Tools Required: None Ensure your vehicle is parked safely with the engine off and the gear selector in Park (P). Clean the existing gear shift knob with a dry or lightly damp cloth to remove any dust or oils. Allow to dry fully before fitting. Hold the suede cover with the open end facing downward, aligning it over the top of the gear knob. Apply gentle, even pressure and push the cover downward, working it around the knob in a smooth motion until it sits flush and secure at the base. Confirm the cover is evenly positioned on all sides with no bunching or lifting at the edges. Perform a gentle tug test to ensure the fit is snug before driving. ⚠ Note: This cover is designed for the standard automatic gear selector knob on L494 Range Rover Sport models (2014–2021). If your vehicle has been fitted with an aftermarket gear knob or a modified selector, fitment cannot be guaranteed. Please verify your vehicle's configuration before ordering. Upgrade Your Sport Interior Small details define great interiors. Explore the full range of Range Rover Sport L494 accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners. Always verify fitment compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Exterior Upgrades LED Air Intake System for Land Rover Defender 90/110 (2020–2024) – L663 A purpose-built bonnet air intake with integrated LED lighting that enhances both engine breathability and trail-ready visibility — engineered to complement the Defender's utilitarian character without compromise. Defender L663 2020–2024 90 & 110 ABS Plastic Matte Black Integrated LED No Coding Required Direct Fit Weather-Resistant Overview The Land Rover Defender L663 was built from the ground up as a vehicle that means business — whether navigating urban environments or pushing deep into remote terrain. Its bold, upright bonnet and angular surfacing are distinctly intentional, and any modification fitted to it needs to match that same standard of purpose-led design. This LED Air Intake System does exactly that. Crafted from high-grade ABS plastic with a matte black finish, this intake unit installs cleanly into your Defender's bonnet panel and serves a dual function: improving the volume and efficiency of airflow reaching your engine, while housing an integrated LED light bar that adds practical illumination for low-light driving, camp setups, or recovery situations where every lumen counts. Unlike aftermarket parts that simply look the part, this unit has been developed specifically around the Defender 90 and 110 body geometry — meaning you won't be trimming, adapting, or compromising fitment. No specialist coding is required, and no permanent modifications to the vehicle are necessary. It's the kind of upgrade that looks factory-fitted the moment it's on. What's Included 🔲 LED Air Intake Unit Matte black ABS with integrated LED bar 🔩 Mounting Hardware All fixings required for secure installation 💡 LED Wiring Loom Pre-terminated for straightforward connection 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered fit for Defender 90 and 110 L663 body panels Integrated LED light bar provides practical low-light illumination High-grade ABS plastic construction resists UV fade and impact Matte black finish matches OEM Defender trim and exterior styling Improves engine bay airflow during high-load and off-road driving No specialist coding or dealership visit required for installation Weather-sealed LED unit performs in rain, dust, and trail environments Retains factory bonnet function — no permanent modifications needed Aggressive, purposeful aesthetic consistent with Defender design language Straightforward DIY install achievable with basic tools in under an hour Compatibility Model Variant Year Range Fitment Land Rover Defender 90 All Trim Levels 2020–2024 Direct Fit Land Rover Defender 110 All Trim Levels 2020–2024 Direct Fit Land Rover Defender 130 All Trim Levels 2022–2024 Verify Before Order Range Rover Sport L494 All Trim Levels 2013–2020 Not Compatible Range Rover Vogue L405 All Trim Levels 2013–2020 Not Compatible Range Rover Velar All Trim Levels 2018–2022 Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 45–60 Minutes  ·  No Coding Required Ensure your Defender is parked on a level surface with the engine fully cool before beginning work. Open the bonnet and locate the existing intake panel area on the bonnet skin — refer to the included instruction guide for exact positioning on your specific variant (90 or 110). Carefully remove any factory trim clips or panels as directed, taking care not to scratch surrounding paintwork. Offer up the LED Air Intake unit to confirm alignment before committing to fixings — the mounting points should line up without force. Secure the intake housing using the supplied hardware, tightening to hand-firm before fully fastening to avoid stress on the ABS housing. Route the LED wiring loom along the bonnet to your chosen power source — a switched accessory feed is recommended to tie LED operation to ignition or a dedicated switch. Connect the wiring, test LED function, then close the bonnet and carry out a final visual check to confirm fitment is flush and secure. Note: If you are unsure about routing electrical wiring, we recommend having the LED connection completed by a competent auto-electrician. Always disconnect the vehicle battery before working with any electrical components. See It in Action Built for Defenders That Go Further Whether you're upgrading for the trail or sharpening the street presence of your L663, this LED Air Intake is one of those rare modifications that genuinely earns its place. Browse the full Defender L663 collection at Victorious Automotive — and use the code below to save on your next two items. Shop Defender L663 Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Defender L663 · Exterior Styling Forged Carbon Side Vents – Defender L663 2020+ (OCTA Design) Transform your Defender's flanks with OCTA-inspired forged carbon side vents — a direct-fit upgrade that delivers a genuinely purposeful visual statement in one of motoring's most distinctive materials. Defender L663 2020–2026 Forged Carbon OCTA Design Direct Fit Exterior Styling High Gloss Black Insert Set of Two Overview The Land Rover Defender L663 is one of the most recognisable vehicles on the road — a modern reinterpretation of an icon that carries real presence wherever it goes. For owners who want to push that presence further, the details matter. The factory side vents are functional and well-proportioned, but they represent an obvious opportunity to introduce a material with genuine character. These forged carbon side vents are modelled on the design language introduced with the Defender OCTA — Land Rover's most extreme factory expression of the L663 platform. Forged carbon, unlike woven carbon fibre, offers a fluid, almost organic texture that varies subtly across each panel. No two pieces look identical, which gives the material an exclusivity that sits perfectly alongside the Defender's utilitarian premium aesthetic. The surround is finished in forged carbon, complemented by a high gloss black insert that maintains visual depth without competing for attention. Engineered as a direct replacement for the standard black side vents, fitment is clean and precise. Whether you're building a full OCTA-inspired specification or simply elevating one detail at a time, these vents deliver a result that looks entirely factory-intentional — because the design reference is exactly that. What's Included 🪟 Forged Carbon Side Vent (Left) Direct replacement for driver-side factory vent 🪟 Forged Carbon Side Vent (Right) Direct replacement for passenger-side factory vent 📋 Fitment Hardware All necessary fixings included for installation 📄 Installation Guide Step-by-step reference for a clean, accurate fit Product Highlights Forged carbon surround with distinctive organic fibre texture — no two pieces identical Inspired by the Defender OCTA factory design language for an authentic, intentional look High gloss black insert provides visual contrast and depth without distracting from the carbon Direct OEM replacement fitment — no cutting, drilling, or modification required Lightweight construction adds visual upgrade without adding meaningful mass Improves airflow characteristics alongside the aesthetic enhancement Precision-moulded to match original vent aperture dimensions exactly UV-resistant clear coat finish protects the carbon surface from fading and yellowing Complements forged carbon bonnet vents, mirror caps, and other OCTA-spec accessories Supplied as a matched pair to ensure consistent appearance on both sides of the vehicle Compatibility Model Code Year Range Trim Fitment Defender 90 L663 2020–2026 All Trims Direct Fit Defender 110 L663 2020–2026 All Trims Direct Fit Defender 130 L663 2022–2026 All Trims Direct Fit Defender OCTA L663 2024–2026 OCTA Direct Fit Defender L316 L316 Pre-2020 All Trims Not Compatible Range Rover Sport L461 / L494 All Years All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal tools, panel clips Ensure the vehicle is parked on a level surface and the relevant body panels are clean and cool to the touch before beginning work. Using a trim removal tool, carefully release the factory side vent clips along the outer edge, working from one end to avoid cracking the surrounding bodywork. Gently pull the existing vent panel away from the body, disconnecting any retaining tabs at the rear of the unit without forcing the fit. Inspect the aperture and clean any residue from the mounting points to ensure the new vent seats flush against the body surface. Align the forged carbon vent into the aperture, pressing evenly along the perimeter until all clips engage with a firm, audible click. Repeat the process on the opposite side, then step back to verify both vents sit symmetrically and flush with the surrounding bodywork. Note: Professional installation is recommended to ensure optimal fit, finish, and to avoid any risk of damage to surrounding bodywork or trim. Clip alignment is critical — do not force the panel if resistance is felt before all tabs are correctly seated. Complete Your OCTA Build These side vents are designed to work as part of a cohesive exterior upgrade. For the full OCTA-inspired appearance, pair them with our forged carbon bonnet hood vents — the same material, the same finish, and the same design reference across both panels. Browse the full Defender L663 collection to explore further exterior and interior upgrade options. Upgrade Your Defender L663 Today Free worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee and trusted by over 12,300 verified Land Rover owners. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Product photography may vary slightly from final supplied item due to the natural variation inherent in forged carbon fibre manufacturing.

Victorious Automotive · Defender L663 · Exterior Upgrades Forged Carbon Hood Vents (OCTA Design) – Land Rover Defender L663 2020+ A precision-engineered forged carbon replacement for the Defender's bonnet vent slats — delivering unmistakable visual depth and improved thermal performance in the OCTA signature pattern. Defender L663 2020–2026 Forged Carbon OCTA Design High Gloss Finish Direct Fit Hood / Bonnet Exterior Overview The Land Rover Defender L663 is a vehicle that wears its character on the outside — every panel, vent, and graphic is a statement of purpose. For owners who want to push that character further, the factory black plastic bonnet vent slats represent one of the most visible and rewarding upgrade opportunities on the entire vehicle. It's a high-visibility detail that draws the eye immediately, and the right material makes all the difference. These forged carbon hood vents in the OCTA design bring genuine material quality to that focal point. Forged carbon — unlike standard woven carbon fibre — produces a fluid, marbled pattern unique to every piece. Paired with a high gloss black insert and formed to match the existing vent geometry precisely, the result is something that looks factory-correct in fitment while reading as unmistakably premium in finish. The OCTA pattern adds structured visual texture that complements the Defender's angular, architectural design language. Beyond aesthetics, the open vent design maintains and supports airflow through the bonnet, assisting cooling efficiency under the hood during demanding driving conditions. These vents are a direct drop-in replacement for the standard slats — no modification, no drilling, no guesswork. For Defender owners who care about the details, this is exactly the kind of upgrade that rewards close attention. What's Included 🔲 Forged Carbon Hood Vents Full set — OCTA design pattern, high gloss finish ⬛ High Gloss Black Insert Pre-fitted contrast insert included with each vent 🔧 Fitting Hardware All necessary clips and retention hardware 📋 Installation Guide Step-by-step fitting reference included Product Highlights Genuine forged carbon construction — no printed wraps or faux finishes Unique marbled pattern on every set — no two pieces are identical OCTA geometric design complements Defender's bold exterior architecture High gloss clear coat for long-term UV and weather resistance High gloss black insert provides sharp contrast definition Direct OEM replacement — slots into factory vent mounting positions No drilling, cutting, or permanent modification required Maintains original bonnet ventilation and airflow properties Significantly lighter than factory plastic equivalent Pairs perfectly with the matching Forged Carbon Side Vents Compatibility Vehicle Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Classic Defender L316 Pre-2020 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–40 Minutes  ·  🛠 Tools Required: Trim removal tool, clean microfibre cloth Ensure the bonnet/hood is fully open and supported. Allow the engine bay to cool completely before beginning work. Using a plastic trim removal tool, carefully release the retaining clips securing the existing factory vent slats. Work gently from one end to avoid cracking the surrounding trim. Remove the original vent slats fully and set aside. Clean the mounting channels with a microfibre cloth to remove any dust or debris. Align the new forged carbon hood vents with the factory mounting positions. Verify orientation — the OCTA design is directional. Press firmly and evenly along the length of each vent until all retaining clips engage with an audible click. Do not force — if resistance is felt, recheck alignment. Close the bonnet and inspect from the front of the vehicle to confirm even seating and flush fitment on both sides. ⚠ Note: Professional installation is recommended if you are unfamiliar with trim removal on the Defender L663. Incorrect removal of factory clips may cause damage to surrounding bodywork. Victorious Automotive accepts no liability for damage incurred during installation. Looking to complete the look? Pair these hood vents with the Forged Carbon Side Vents for the Defender L663 → Complete Your Defender Build Browse the full Victorious range of exterior upgrades for the Defender L663 — from forged carbon to gloss black trim, every piece is engineered to fit and finish like it belongs. Shop Defender L663 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim ABS Carbon Fiber Window Switches Trim — Range Rover Vogue L460 2023–2024 A precision-crafted door panel upgrade that brings a refined carbon fibre aesthetic to the window switch surrounds of your new-generation Range Rover Vogue L460. Range Rover Vogue L460 2023–2024 Carbon Fibre Finish ABS Material Direct Fit No Drilling Required Interior Trim Door Panel Upgrade Overview The fifth-generation Range Rover Vogue L460 sets an extraordinarily high bar for cabin quality, pairing its architecture of uncluttered surfaces with premium material choices throughout. For owners who want to go further — personalising those details that catch the eye every time a door is opened — the window switch panel is one of the most visible and tactile contact points in the entire cabin. This ABS Carbon Fiber Window Switches Trim has been developed with the exact contours of the L460's door panel in mind. The wrap-textured carbon fibre patterned surface introduces a sporting, contemporary contrast against the L460's softer interior tones, adding depth and visual interest without altering the clean lines that define the new generation. Whether you're building a blacked-out sport interior theme or simply elevating individual details, this trim delivers a meaningful upgrade at one of the most noticed points in the cabin. Constructed from high-grade ABS — the same material class used in OEM automotive trim manufacturing — this piece is engineered to resist daily handling, UV exposure, and the stresses of temperature fluctuation that come with a vehicle that transitions between heated garages and outdoor environments. The adhesive-backed fitting system means no permanent modification to your vehicle's door card whatsoever. What's Included 🪟 Carbon Fibre Window Switch Trim x1 — ABS with carbon fibre finish, pre-cut to L460 spec 🔲 Pre-Applied Adhesive Tape Double-sided automotive-grade tape, factory-applied to reverse 📄 Installation Guide Step-by-step fitment instructions included in packaging Product Highlights Precision-cut to match the L460 window switch panel geometry exactly Carbon fibre texture finish with a gloss-enhanced surface layer High-grade ABS construction resistant to warping and cracking No drilling, no permanent modification — fully reversible fit Pre-applied double-sided automotive adhesive for a seamless bond Protects the underlying trim panel from scratches and scuffs UV-stable finish designed to retain colour and gloss over time Compatible with both left and right-hand drive L460 configurations Manufactured in a quality-certified automotive trim facility Complements other carbon fibre interior upgrades for a cohesive look Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–15 Minutes  |  🔧 Tools Required: None Begin with the vehicle parked and the interior at room temperature. Avoid fitting in direct sunlight or very cold conditions, as this affects adhesive performance. Thoroughly clean the existing window switch trim panel using isopropyl alcohol (IPA) on a lint-free cloth. Remove all dust, oils, and residue, then allow to dry completely — approximately 2 to 3 minutes. Test-fit the carbon fibre trim piece over the switch panel without removing the adhesive backing, confirming alignment across all edges and cut-outs before committing to the bond. Peel back the adhesive liner carefully from the reverse of the trim piece, taking care not to touch the adhesive surface with bare fingers. Align the trim piece precisely from one end and press firmly into position, applying sustained pressure across the entire surface for 30 to 60 seconds to activate the adhesive bond. Allow the adhesive to cure fully for a minimum of 24 hours before exposing the trim to moisture, cleaning products, or significant temperature change. ⚠ Note: Ensure the door panel surface is completely dry and free of any silicone-based detailing products before application. Silicone residue will significantly reduce adhesive strength and may cause the trim to detach over time. If you have recently treated your interior with a conditioning product, clean with IPA before proceeding. Complete Your L460 Interior Browse our full collection of Range Rover Vogue L460 interior accessories — from dashboard trim to gear surround upgrades — all designed with the same commitment to precision fit and premium finish. Shop Range Rover Vogue L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Lighting LED Fog Lights Kit with Daytime Running Lights & Wiring Harness — Land Rover Defender L663 2020–2022 Sharper front-end presence and all-weather visibility in a single direct-fit LED upgrade, purpose-built for the L663 Defender's bumper architecture. Defender L663 2020 · 2021 · 2022 LED Fog Lights Daytime Running Lights ABS Lens Housing 12V System Includes Harness Front Fitment Overview The Land Rover Defender L663 is a vehicle defined by intention — every panel, every surface angle, every light cluster carries visual weight. If you're running the 2020–2022 model and the stock front-end foglights feel like an afterthought, this LED kit exists to correct that. Engineered to slot directly into the lower front bumper apertures of the L663, these lights deliver a crisper, more purposeful look that brings the Defender's face in line with its character. This kit combines high-output LED fog lamps with integrated daytime running light functionality, giving you two roles from a single unit. The LED array operates on the standard 12V system and draws significantly less current than conventional halogen fog units — meaning less load on the alternator and a longer service life without any sacrifice in forward light output. The ABS plastic lens housing is impact-resistant, well-suited to the debris and weather the Defender routinely encounters. The complete wiring harness is included, removing the need to source third-party connectors or splice directly into the loom. The result is a cleaner install with a factory-adjacent finish. This is the kind of upgrade that looks like it should have come from the factory — and that's precisely the point. What's Included 💡 LED Fog Light Units (x2) Left & right front fitment, ABS lens housing 🔌 Wiring Harness Pre-wired loom for direct connection, no splicing required 🔧 Mounting Hardware Fixings required for fitment to bumper aperture 📄 Fitment Instructions Step-by-step guide for installation reference Product Highlights Dual-function LED units — fog light and DRL in one 100% brand new — not refurbished or remanufactured ABS plastic lens — impact-resistant and weather-sealed 12V direct compatibility with L663 Defender electrical system Low power consumption — reduced alternator load vs. halogen Complete wiring harness included — no third-party loom needed Front bumper fitment — purpose-designed for L663 architecture High-intensity LED array — improved forward light throw Clean factory-style aesthetic — no exposed wiring or aftermarket look Straightforward two-light kit — symmetrical left and right units Compatibility Model Code Year Range Fitment Land Rover Defender 90 L663 2020 · 2021 · 2022 Direct Fit Land Rover Defender 110 L663 2020 · 2021 · 2022 Direct Fit Land Rover Defender 130 L663 2022 Direct Fit Land Rover Defender (Classic) L316 Pre-2020 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Trim removal tools, panel cutters, screwdrivers Ensure the vehicle is on level ground with the ignition off and the 12V system fully isolated before beginning any electrical work. Remove the lower front bumper trim panels using appropriate trim removal tools to expose the existing fog light apertures on both sides. Carefully cut out the relevant sections of the original plastic bumper insert as required to allow each LED unit to seat flush and securely — measure twice before cutting. Slot each LED fog light unit into the prepared aperture and secure using the supplied mounting hardware, ensuring a firm and rattle-free fit. Route the wiring harness through the bumper cavity, connecting each unit to the harness connectors and ensuring the loom is secured away from any heat or moving components. Connect the harness to the vehicle's existing fog light circuit and restore the bumper trim panels, checking alignment before final fixing. Restore power to the vehicle and test both the fog light and DRL functions before completing the installation. ⚠ Important: This installation requires permanent modification to the original plastic bumper insert. Please ensure you are comfortable with this before proceeding. If in doubt, we recommend having the fitment carried out by a qualified automotive technician. This modification cannot be reversed once the cutting is complete. Built for Defenders. Trusted by Enthusiasts. Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium exterior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product images are for illustrative purposes only; minor variations in finish or colour may occur.

Victorious Automotive · Range Rover Vogue L460 · Interior Accessories Black ABS Central Control Multi-Function Storage Organizer for Range Rover Vogue L460 (2023) A precision-fitted central console storage organizer crafted from premium ABS plastic — purpose-built to bring order and refinement to the L460 Vogue interior without compromise. Range Rover Vogue L460 2023 ABS Plastic Central Console Multi-Function Storage Gloss Black No-Drill Install Interior Organizer Overview The Range Rover Vogue L460 is a vehicle that demands an interior experience as considered as its exterior presence. Every surface, every material, and every detail matters — and the central console is no exception. As the primary interface between driver and cabin, keeping that space clean, functional, and elegant is not merely a preference; it's a reflection of how seriously you take ownership. This multi-function central control storage organizer has been engineered specifically for the 2023 Land Rover Range Rover Vogue L460. Formed from high-grade ABS plastic in a deep gloss black finish, it integrates seamlessly with the console's existing architecture, filling unused space with intelligent, practical compartmentalization. Whether it's housing your phone, key fob, sunglasses, or loose change, this organizer brings quiet order to the cockpit. Installation requires no tools and no permanent modification. The pre-applied double-sided adhesive tape provides a secure, vibration-resistant bond that feels factory-fitted from the moment it's in place. For L460 owners who expect every aftermarket addition to meet the same standard as the vehicle itself — this delivers exactly that. What's Included 🗂️ Central Control Storage Unit 1× ABS black organizer, pre-fitted with adhesive 🔧 Pre-Applied Adhesive Tape Industrial-grade double-sided tape, factory-fitted 📄 Installation Guide Simple step-by-step fitment instructions Product Highlights Precision-engineered for the 2023 Range Rover Vogue L460 central console Premium ABS plastic construction — durable, lightweight, and heat-resistant Deep gloss black finish complements the L460's interior colour palette Multi-compartment design for organised, accessible storage Pre-applied industrial double-sided adhesive for a secure, tool-free fit No drilling, cutting, or permanent modification required Vibration-dampening bond — stays firmly in place on all road surfaces Easy to remove and reposition if needed during installation 100% brand new — manufactured to high-tolerance OE-matching standards Subtle profile integrates naturally without disrupting the cabin aesthetic Compatibility Vehicle Code Years Fitment Range Rover Vogue L460 2023 Direct Fit Range Rover Vogue L460 2022, 2024, 2025, 2026 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  ·  ⏱️ Estimated Time: 5–10 Minutes  ·  🔩 Tools Required: None Before beginning, ensure the vehicle is parked, the ignition is off, and the interior is at or above room temperature to aid adhesive bonding. Thoroughly clean the central console surface where the organizer will be mounted. Use an isopropyl alcohol wipe and allow to dry completely — any residue, dust, or moisture will compromise adhesion. Dry-fit the storage organizer into the console area to confirm alignment and positioning before removing the adhesive backing. Once satisfied with the position, peel the protective film from the double-sided adhesive tape on the underside of the unit. Press the organizer firmly into the designated position, applying steady pressure across the entire base for 30–60 seconds to activate the adhesive bond. Allow 24 hours before placing heavy items in the organizer to allow the adhesive to fully cure and reach maximum holding strength. ⚠ Important: Do not install on a cold or damp surface. Adhesive performance is significantly reduced in temperatures below 10°C. If the surface finish on your console has any protective coating or is textured, lightly scuff with a microfibre cloth before cleaning to improve bonding. If in doubt, contact our team before fitting. Upgrade Your L460 Interior Every detail inside the Range Rover Vogue L460 is a statement. Browse our full collection of precision-fit interior accessories designed exclusively for your vehicle. Shop All L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Range Rover Vogue L460 / Sport L461 · Exterior Styling Wind Deflector Vents for Range Rover Vogue L460 & Sport L461 (2022–2026) Precision-fit ABS wind deflector vents engineered to complement the angular exterior language of the fifth-generation Range Rover and second-generation Sport — adding aerodynamic definition and a purposeful blacked-out finish with zero permanent modification. Range Rover Vogue L460 Range Rover Sport L461 2022–2026 ABS Plastic Gloss Black No-Drill Fit Adhesive Mount Exterior Styling ISO9001 Certified Overview The Range Rover Vogue L460 and Range Rover Sport L461 represent a significant evolution in Jaguar Land Rover's design philosophy — sharper lines, a more assertive stance, and a cabin-forward silhouette that demands equally considered exterior accessories. These are vehicles built for owners who pay attention to detail, and every visual element on them should reflect that standard. These wind deflector vents are designed from the ground up for the 2022-onwards L460 and L461 platforms. Formed from high-grade ABS plastic and finished in a deep gloss black, they integrate seamlessly with the vehicle's existing body panels — enhancing the exterior with an aerodynamically-inspired accent that looks factory-considered rather than aftermarket-added. The fitment profile has been closely matched to the bodywork geometry of both the standard Vogue and the Sport variant. Installation requires no drilling, cutting, or permanent bodywork alteration. The included professional-grade double-sided adhesive tape provides a secure, weather-resistant bond that holds confidently across motorway speeds and changing climates — making these an ideal upgrade for owners who want a clean result without workshop involvement. What's Included 🌬️ Wind Deflector Vent Set Full set matched to L460/L461 body profile 🔲 Double-Sided Adhesive Tape Pre-cut, weather-resistant, high-bond grade 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-moulded ABS plastic for exact fitment to L460 and L461 body contours Deep gloss black finish complements both standard and Black Pack exterior trims No-drill, no-cut installation — zero permanent modification to bodywork High-bond double-sided adhesive rated for outdoor and high-speed use Weather-resistant construction — UV stable, corrosion-free, rain-proof Manufactured in an ISO9001 certified production facility Lightweight design adds visual impact without affecting handling balance Aerodynamic vent profile adds a purposeful, sporty exterior accent Compatible with both the Vogue L460 and Sport L461 from 2022 onwards Reversible fitment — can be removed without leaving visible damage Compatibility Model Code Years Fitment Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  Tools Required: None Before beginning, wash and degrease the intended mounting area on the vehicle body thoroughly. Allow the surface to dry completely — any moisture or residue will compromise adhesive bond strength. Dry-fit the deflector vents against the body panels to confirm positioning and alignment. Compare carefully against the product images to ensure correct orientation for your specific model variant. Mark the intended placement lightly if needed. Peel back a small section of the adhesive backing and position one end of the deflector carefully against the body panel. Once aligned, press firmly along the full length of the deflector for a minimum of 30 seconds, applying even pressure across the entire adhesive surface. Allow the adhesive to cure for at least 24 hours before exposing the vehicle to rain, a car wash, or motorway speeds. This ensures maximum bond strength is achieved before any stress is applied. ⚠ Important: Always cross-reference the product images with your specific vehicle before committing to installation. While this product is designed for both the L460 and L461, visual confirmation prior to fitment is strongly recommended. If you are unsure of compatibility, contact our team at +44 203 943 9919 before installing. Complete Your L460 or L461 Build These deflector vents are just the beginning. Explore our full range of exterior styling accessories designed specifically for the Range Rover Vogue L460 and Range Rover Sport L461 — curated by enthusiasts, for owners who demand precision. Shop Range Rover Vogue L460 → Shop Range Rover Sport L461 → Buying two or more items? Use code below for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Air Intake Grille Strip Trims — Carbon Fibre & Black Finish for Range Rover Sport L461 2023–2024 Precision-formed ABS grille accent strips that bring a sharper, more purposeful character to the front fascia of the new Range Rover Sport L461 — available in carbon fibre or gloss black finish. Range Rover Sport L461 2023–2024 ABS Construction Carbon Fibre Finish Gloss Black Finish No-Drill Fit Double-Sided Adhesive Exterior Styling ISO9001 Manufactured Overview The Range Rover Sport L461 is one of the most visually striking performance SUVs on the road — a vehicle that rewards owners who pay attention to detail. The L461 generation, launched in 2022 and refreshed through 2023 and 2024, features a more aggressive front end than any Sport before it, with prominent air intake apertures that define the car's visual width and stance. Those intakes are a natural focal point, and one that responds brilliantly to considered styling upgrades. These air intake grille strip trims are designed specifically for the L461 Sport, profiling directly to the geometry of the front lower grille sections with no cutting, drilling, or modification required. Manufactured from high-grade ABS and finished in either carbon fibre texture or gloss black, they add a layer of visual definition that elevates the car's exterior without altering its fundamental character. Whether you're running a full Autobiography specification or a subtly modified Dynamic, these strips integrate cleanly and confidently. Built to ISO9001 quality standards and exported globally, these trims are produced in a dedicated automotive accessories facility and carry the kind of fitment accuracy you'd expect from a product engineered around a single, specific vehicle. Installation takes minutes, and the result is a finished, purposeful front end that looks as though it left the factory this way. What's Included 🧩 Grille Strip Trim Set Pre-cut ABS strips designed for L461 air intake apertures 🔲 Double-Sided Adhesive Tape Pre-applied 3M-grade backing for secure, clean fitment 📦 Protective Packaging Individually boxed to prevent transit damage to finish 📋 Installation Reference Visual placement guide included in packaging Product Highlights Precision-profiled for the Range Rover Sport L461 front air intake geometry Available in carbon fibre texture or gloss black ABS finish High-grade ABS construction — scratch and wear resistant Pre-applied double-sided adhesive — no drilling or cutting required Manufactured to ISO9001 quality standards Enhances visual width and front-end aggression of the L461 Sport Lightweight fitment with no impact on vehicle aerodynamics UV-stable finish retains colour and texture in direct sunlight Exported and approved for global market fitment 100% new — supplied in box, ready to install Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L461 2023–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L460 2022–2024 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 Minutes  ·  Tools Required: None Thoroughly clean and degrease the air intake grille area of your L461 Sport using isopropyl alcohol. Allow to dry completely — any moisture or wax residue will compromise adhesion. Dry-fit each strip to the corresponding intake aperture before peeling the adhesive backing. Confirm alignment, profile match, and positioning against the product reference images. Once satisfied with placement, peel the adhesive liner from the first strip and apply firmly, working from the centre outward to avoid air pockets or misalignment. Apply even, sustained pressure across the full length of each strip for a minimum of 30 seconds to activate the adhesive bond. Repeat for all remaining strips. Allow a minimum of 24 hours before washing the vehicle or exposing the fitment to sustained water pressure. ⚠ Important: Please compare all strips carefully against the product images before beginning installation. Adhesive-backed trims cannot be repositioned cleanly once fully bonded. If you are unsure of fitment, contact our team on +44 203 943 9919 before installation. The Right Finish for the New Sport Small details define a great specification. Browse the full range of Range Rover Sport L461 exterior accessories at Victorious — curated for owners who demand precision in every element of their build. Shop Range Rover Sport L461 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L461 · Interior Trim ABS Carbon Fibre Centre Console Side Trim for Range Rover Sport L461 2023–2024 A precision-cut carbon fibre effect interior upgrade that elevates the Sport's cabin with a sportier, more bespoke aesthetic — installed in minutes with no tools required. Range Rover Sport L461 2023–2024 ABS Material Carbon Fibre Finish Centre Console Interior Trim No-Drill Fit 3M Adhesive Overview The Range Rover Sport L461 — launched in its third generation in 2022 — represents a genuine step change in driver-focused dynamics and interior sophistication. Its cabin is already one of the most premium spaces in its class, but for owners who want their Sport to feel truly individual, the details matter. The centre console is one of the most visually prominent areas of the interior, seen and touched on every journey — and it's one of the first places enthusiasts look to personalise. These centre console side trim panels deliver a sharp carbon fibre aesthetic using high-grade ABS material, moulded and finished to mirror the exact contours of the L461's centre console architecture. The carbon fibre weave pattern adds visual depth and a motorsport-inspired edge that sits naturally alongside the Sport's performance character — whether your interior is finished in light or dark tones. Manufactured in an ISO9001-certified facility and exported worldwide, these trim pieces are built to last. The scratch-resistant ABS surface resists daily wear, while the precision moulding ensures a seamless fitment with no visible gaps or misalignment. Installation requires no tools, no permanent modifications, and no mechanical knowledge — just a clean surface, the supplied 3M adhesive, and a few minutes of your time. What's Included 🔲 Centre Console Side Trim Set Carbon fibre finish ABS panels, left and right pair 🔧 Pre-Applied 3M Adhesive Double-sided tape pre-fitted to the rear of each panel 📦 Protective Retail Packaging Brand new, boxed and protected for safe transit Product Highlights Precision-moulded ABS for exact fitment on L461 console geometry Carbon fibre weave finish adds a motorsport-inspired interior aesthetic Scratch and abrasion resistant surface for long-term durability Pre-applied 3M double-sided adhesive for a clean, tool-free install No drilling, cutting or permanent modifications required ISO9001-certified manufacturing with global export quality standards Direct OEM-style fitment — no visible gaps or misalignment Lightweight ABS construction adds no perceptible weight Enhances the visual depth and premium feel of the Sport's interior 100% new condition, individually boxed and quality checked Compatibility Vehicle Code Year Range Fitment Range Rover Sport L461 2023 – 2024 Direct Fit Range Rover Sport L494 2013 – 2022 Not Compatible Range Rover Vogue L460 2022 – 2024 Not Compatible Range Rover Vogue L405 2013 – 2021 Not Compatible Defender L663 2020 – 2024 Not Compatible Range Rover Velar L560 2018 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Thoroughly clean the centre console side surfaces where the trim will be applied. Remove all dust, oils and residue — a microfibre cloth with isopropyl alcohol is recommended for best adhesive bonding. Dry-fit the trim panels against the console to confirm alignment and orientation before committing. Compare carefully with the product images to ensure correct positioning. Peel the protective backing from the pre-applied 3M double-sided adhesive on the rear of each trim panel. Carefully align the panel to the console surface and press firmly, applying consistent pressure across the full surface for 30–60 seconds to ensure a strong bond. Repeat for the opposite side. Avoid washing the vehicle or exposing the panels to moisture for at least 48 hours after installation to allow the adhesive to fully cure. ⚠ Important: Always confirm the trim panels match your vehicle's console layout by comparing with the product images prior to installation. Console configurations can vary by trim level and market specification. Once the adhesive is activated, repositioning may affect bonding strength. Complete Your L461 Interior Explore the full range of Range Rover Sport L461 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Range Rover Sport L461 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L461 · Interior Trim Rear Air Conditioning Vent Trims in ABS Carbon Fibre — Range Rover Sport L461 2023–2024 Elevate the rear cabin aesthetic of your new-generation Range Rover Sport with precision-cut ABS carbon fibre vent trims — a subtle but unmistakable interior upgrade. Range Rover Sport L461 2023–2024 ABS Carbon Fibre Rear AC Vent Trim No-Drill Fit Interior Upgrade Brand New ISO9001 Quality Overview The Range Rover Sport L461 represents a significant leap forward for Land Rover — sharper in design, more driver-focused in layout, and far more premium across every surface of the cabin. For owners who want to push that interior quality one step further, the details matter enormously. The rear air conditioning vent area, highly visible to rear passengers, is one such detail that benefits greatly from a considered upgrade. These rear air conditioning vent trims are precision-formed from high-quality ABS plastic finished in a carbon fibre aesthetic, designed to sit flush over the factory vent surround and add an immediate visual lift to the rear cabin environment. The carbon fibre pattern introduces a sporting, technical character to the interior without detracting from the refinement that defines the Sport L461's character. They're manufactured in an ISO9001-certified facility and carry a track record of export quality worldwide. Installation requires no drilling or permanent modification. Each trim is backed with professional-grade double-sided adhesive tape, allowing a clean, tool-free fit that holds firmly without marking the original trim. Whether you're building a full carbon fibre interior package for your L461 or simply looking for one well-chosen upgrade, these vent trims are a clean, confident place to start. What's Included 🪟 Rear AC Vent Trim Set ABS carbon fibre finish, pre-cut to fit L461 rear vents 🔲 Pre-Applied 3M-Style Adhesive Double-sided tape pre-applied to rear of each trim piece 📦 Retail Packaging Box Each unit ships brand new, boxed and protected 📋 Fitment Reference Visual reference images included for installation guidance Product Highlights Precision-formed ABS construction with carbon fibre surface finish Direct fit for Range Rover Sport L461 2023 and 2024 model years Tool-free installation via pre-applied double-sided adhesive Scratch and wear-resistant surface for long-lasting appearance No permanent modification or drilling required Manufactured in an ISO9001-certified production facility Lightweight trim pieces — no added weight or bulk Adds a performance-oriented aesthetic to the rear cabin Fully reversible — original trim remains undamaged beneath Brand new condition, individually boxed and quality-checked Compatibility Vehicle Code Year Range Fitment Range Rover Sport L461 2023–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L460 2022–2024 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible ⚠ Important: Please compare your existing rear air conditioning vent unit carefully against the product images before placing your order. The L461 Sport was produced in multiple interior configurations — visual confirmation is strongly recommended to ensure a correct fit. Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the rear cabin has been sitting at room temperature — cold surfaces reduce adhesive bond strength. Using a microfibre cloth lightly dampened with isopropyl alcohol (IPA), clean the surface of the existing rear AC vent surround thoroughly. Allow to dry completely. Dry-fit each trim piece without removing the adhesive backing to confirm correct alignment and positioning before committing. Once satisfied with placement, peel the protective film from the double-sided adhesive tape on the rear of the trim. Carefully align and press the trim firmly into position, applying even pressure across the full surface for 30–60 seconds to activate the adhesive bond. Allow 12–24 hours before exposing the trim to extreme temperature changes or pressure for best adhesion results. ⚠ Note: Avoid installation in very cold or humid conditions as this can compromise adhesive performance. Do not use steam cleaners or harsh chemical cleaners directly on the trim surface after fitting. Shop the Full Range Rover Sport L461 Interior Collection These vent trims are just one piece of a wider range of precision interior upgrades available for the new Range Rover Sport L461. Explore the full collection and build your ideal cabin specification. View All L461 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Climate Control Climate Control AC Upgrade Screen — Land Rover Discovery 5 LR5 L462 (2017–2020) A precision-fit climate control screen upgrade that modernises the AC interface of your Discovery 5 L462 with a cleaner, more responsive display — no cutting, no coding, no compromise. L462 2017–2020 Discovery 5 LR5 Climate Control AC Screen Upgrade Plug & Play Direct Fit Overview The Land Rover Discovery 5 L462 is one of the most capable and well-appointed family SUVs ever built — a vehicle that balances genuine off-road ability with a genuinely premium interior. For owners of 2017–2020 models, however, the factory climate control panel can feel dated compared to the rest of the cabin's ambitions. The physical buttons and limited display feedback are a subtle but persistent reminder that this generation's HVAC interface was conceived before the era of integrated touch-first cockpit design. This Climate Control AC Upgrade Screen is engineered specifically for the Discovery 5 L462 platform, replacing the OEM climate panel with a refined, higher-resolution display unit that delivers cleaner feedback and a noticeably more modern feel. The unit integrates directly into the existing dash architecture, maintaining the original control logic and wiring harness so nothing needs to be recoded or recalibrated at the dealership. At Victorious Automotive, we only carry fitment-verified upgrades for Land Rover and Range Rover vehicles. This unit has been selected for its build quality, ease of installation, and seamless visual integration with the Discovery 5's interior. If you take pride in how your L462 looks and feels on the inside, this is one of the most impactful cabin upgrades available at the price point. What's Included 🖥️ AC Upgrade Screen Unit Main climate control display, pre-assembled and ready to fit 🔌 Plug & Play Wiring Harness Connects directly to the factory connector — no splicing required 🔩 Mounting Hardware All fixings required for a secure, rattle-free installation 📄 Installation Guide Step-by-step instructions tailored to the L462 platform Product Highlights Precision-engineered for the Discovery 5 L462 dash architecture Upgraded display clarity over the OEM climate panel Plug & play installation — uses existing factory wiring No dealer recoding or software recalibration required Maintains full original climate control functionality Retains front and rear AC zone control operation Seamless integration with existing interior trim panels Durable construction built to withstand daily cabin use Clean, modern aesthetic that complements the Discovery 5 interior Fitment-verified by Victorious Automotive's technical team Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 SE L462 2017–2020 Direct Fit Land Rover Discovery 5 HSE L462 2017–2020 Direct Fit Land Rover Discovery 5 HSE Luxury L462 2017–2020 Direct Fit Land Rover Discovery 5 First Edition L462 2017–2018 Direct Fit Land Rover Discovery 5 (Facelift) L462 2021–onwards Verify Before Ordering Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tools, T20 Torx screwdriver Ensure the vehicle ignition is fully off and the key is removed before beginning any work. Using a trim removal tool, carefully prise away the centre console surround panel surrounding the existing climate control unit to avoid scratching the fascia. Locate and remove the screws or clips securing the factory climate control panel — typically T20 Torx fasteners on the L462 platform. Slide the OEM unit forward and disconnect the factory wiring harness connector(s) from the rear of the panel. Connect the included plug & play harness adapter to the factory connector, then connect the other end to the new AC upgrade screen unit. Slide the new unit into position, ensuring it seats flush against the surrounding trim before securing with the provided mounting hardware. Reattach the centre console surround panel, ensuring all clips are firmly engaged. Power on the vehicle and test all climate control functions including fan speed, temperature zones, and defrost settings before completing the installation. ⚠ Please Note: Always verify your exact vehicle variant and build date prior to ordering. If your Discovery 5 L462 features a non-standard or dealer-fitted climate system, we recommend contacting our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Installation by a qualified automotive technician is recommended if you are unfamiliar with trim removal on the L462 platform. Upgrade Your Discovery 5 Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Worldwide shipping via DHL, FedEx, UPS and TNT — with a 30-day money-back guarantee on every order. Shop All Discovery 5 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT ↩️ 30-Day Money-Back Guarantee 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Defender L663 · Exterior Upgrades Gloss Black Raised Air Intake Snorkel – Land Rover Defender L663 (2020+) A high-mounted gloss black snorkel engineered specifically for the Defender L663 — delivering cleaner, cooler air to the engine while reinforcing the Defender's commanding off-road presence. Defender L663 2020–2026 Gloss Black Raised Air Intake Direct Bolt-On UV-Resistant Finish No Drilling Required 90 · 110 · 130 Overview The Land Rover Defender L663 was engineered from the ground up to be a genuine off-road tool — capable, composed, and ready for environments that most vehicles wouldn't dare enter. Yet for owners who venture beyond the tarmac in earnest, raising the air intake point is one of the most meaningful modifications you can make. It keeps dust, water spray, and fine debris away from the engine's intake, particularly during river crossings, muddy trails, or heavily rutted terrain where low-mounted intakes become a liability. This Gloss Black Raised Air Intake Snorkel has been precision-engineered to integrate cleanly with the Defender L663's bodywork. It mounts using existing factory points, meaning no cutting or drilling is required on the majority of vehicles — the fitment is purposeful and flush, not an afterthought. The gloss black finish has been UV-treated to resist fading and surface degradation, making it equally at home on daily-driven urban Defenders as it is on those seeing serious off-road use. Aesthetically, the snorkel pairs naturally with Black Pack trims, aftermarket bumpers, roof rack systems, and side steps — contributing to a cohesive, purposeful build rather than looking out of place. Whether your Defender is a genuine expedition vehicle or a meticulously specified street machine, this upgrade rewards both sides of the coin. What's Included 🌬️ Gloss Black Snorkel Unit Full raised air intake assembly, gloss black finish 🔩 Mounting Hardware Kit All fixings, brackets, and seals included 📄 Installation Guide Step-by-step fitting instructions Product Highlights Precision-engineered fitment for the Defender L663 platform with no structural modifications needed Raises the air intake point significantly above standard, reducing dust and water ingestion off-road Gloss black finish UV-treated for long-term resistance to fading and surface degradation Scratch-resistant exterior coating maintains appearance through regular off-road use Direct bolt-on installation using existing factory mounting locations No drilling required on most Defender 90, 110, and 130 variants Compatible with both petrol and diesel engine configurations Complements Black Pack, aftermarket bumpers, roof racks, and side steps Sealed junctions and weatherproof construction for all-season durability Improved airflow positioning delivers cleaner intake conditions in wet or dusty environments Compatibility Model Variant Year Range Fit Land Rover Defender 90 L663 – All Engines 2020 – 2026 Direct Fit Land Rover Defender 110 L663 – All Engines 2020 – 2026 Direct Fit Land Rover Defender 130 L663 – All Engines 2020 – 2026 Direct Fit Defender L663 – Petrol P300 / P400 / P525 2020 – 2026 Direct Fit Defender L663 – Diesel D200 / D250 / D300 2020 – 2026 Direct Fit Defender L663 – PHEV P400e 2021 – 2026 Direct Fit Defender with Factory Snorkel Any variant Any year Not Compatible Defender L316 (Classic) Pre-2020 Models Pre-2020 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5 – 2.5 Hours Confirm your vehicle does not have a factory-fitted snorkel before proceeding. Check around the A-pillar and front wing area on the driver's side. Carefully remove any relevant exterior trim panels or wing liner sections to access the factory mounting points along the A-pillar and front wing. Dry-fit the snorkel assembly against the vehicle to confirm alignment and identify all fixing locations before committing to the final installation. Where required, apply the supplied seals and weatherstripping to ensure a watertight junction between the snorkel body and the vehicle's bodywork. Secure the snorkel using the provided mounting hardware, tightening fixings progressively and evenly to avoid stressing the body panels. Refit all trim panels and liner sections. Inspect all junctions for gaps or misalignment and adjust as needed before taking the vehicle out. ⚠ Note: Professional installation is recommended for best results. While no drilling is required on most variants, some individual build specifications may vary. Always refer to the included installation guide and, if in doubt, consult a qualified automotive technician familiar with Defender L663 bodywork. Tackle Terrain. Elevate the Build. Explore the full range of exterior upgrades for the Defender L663 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Exterior Accessories Roof Rack for Land Rover Defender L663 90 & 110 (2020–2026) Purpose-built load-carrying platform that bolts directly to your Defender L663's OE roof rails — expanding rooftop capacity without compromising the vehicle's commanding aesthetic. Defender L663 2020–2026 90 & 110 Variants Silver & Black Finish OE Rail Mount Direct Fit Exterior Upgrade Aluminium Construction Overview The Land Rover Defender L663 was engineered from the ground up to reclaim the spirit of the original while meeting the demands of modern adventure. Whether you're running a 90 in urban environments or a 110 across extended overland routes, the roofline of the L663 is one of its most distinctive design features — and one of its most practical canvases for upgrading your load-carrying capability. This roof rack has been developed specifically for the Defender L663 platform, available in both the short-wheelbase 90 and the long-wheelbase 110 body configurations. Engineered to mount directly onto your vehicle's factory-fitted roof rails, it requires no drilling, no permanent modification, and no compromise to the structural integrity of your Defender. The clean, low-profile design sits flush with the roofline and is offered in both Silver and Black finishes to suit your spec. Whether you're loading up boards, rooftop tents, jerry cans, storage boxes, or expedition equipment, this rack provides a stable, secure, and well-distributed platform for the journey ahead. Built from durable materials and finished to withstand the elements, it's the kind of upgrade that earns its place every time you leave the tarmac — and looks the part when you don't. What's Included 🛠️ Roof Rack 1 x full roof rack platform, vehicle-specific fitment 📄 Installation Instructions Step-by-step fitting guide included in packaging 🔩 Mounting Hardware All required fixings for OE rail attachment included 🎨 Choice of Finish Available in Silver or Black — selected at checkout Product Highlights Engineered specifically for the Defender L663 90 and 110 platforms Mounts to factory OE roof rails — no drilling or permanent modification Available in Silver and Black finishes to complement any Defender spec Low-profile design preserves the Defender's distinctive roofline silhouette Heavy-duty construction rated for serious load-carrying across all terrain types Compatible with aftermarket accessories including rooftop tents and storage systems Corrosion-resistant finish designed to withstand prolonged outdoor exposure Clean, flush mounting points that integrate naturally with the vehicle's bodywork Suitable for both on-road touring and off-road overland adventure use Straightforward home installation — no specialist tools or workshop visit required Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 90 L663 2020–2026 3-Door SWB Direct Fit Land Rover Defender 110 L663 2020–2026 5-Door LWB Direct Fit Land Rover Defender 130 L663 2022–2026 5-Door XLWB Verify Before Purchase Land Rover Defender (Original) L316 Pre-2016 All Not Compatible Range Rover Sport L461 / L494 All Years All Not Compatible Range Rover Vogue L460 / L405 All Years All Not Compatible Installation Notes 🔧 Difficulty: Beginner · Estimated Time: 30–60 Minutes · Tools: Basic Hand Tools Confirm your Defender L663 is fitted with OE factory roof rails prior to beginning installation. This rack requires the original equipment rails to mount correctly. Clean the roof rail mounting points with a dry cloth to remove any debris, dust, or moisture before fitting. Position the roof rack centrally over the vehicle roof, aligning the mounting brackets with the OE rail slots on both sides of the vehicle. Hand-tighten all mounting hardware into position first, ensuring the rack sits level and symmetrically before applying full torque. Using the supplied fixings and a torque wrench or socket set, fully tighten all mounting points to the values specified in the included installation instructions. Perform a gentle shake test once fully tightened to confirm there is no movement or play in the rack before loading. Re-check all mounting points after your first 50 miles of driving and periodically thereafter, especially after off-road use or heavy loading. ⚠ Important: This roof rack requires OE factory-fitted roof rails for correct installation. Vehicles without original equipment roof rails will require rails to be fitted first. Do not exceed the maximum roof load rating stated in your Defender L663 owner's manual. Overloading can affect vehicle handling and void warranty coverage. Built for the Defender. Backed by Victorious. Every accessory we stock is selected to meet the standards Defender owners expect — proper fitment, real-world durability, and a finish worthy of the vehicle. Explore the full range of Defender L663 exterior upgrades at Victorious Automotive. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Real Carbon Fiber Center Console & Dashboard Trim Strips — Range Rover Vogue L460 (2023) Genuine woven carbon fiber trim strips precision-matched to the 2023 Range Rover Vogue L460 interior, delivering a motorsport-grade finish with no permanent modification required. L460 Vogue 2022–2026 Real Carbon Fiber Center Console Dashboard Trim Glossy Finish 3M Adhesive No Drilling Direct Fit Overview The Range Rover Vogue L460 is the definitive expression of British luxury — a cabin that sets the benchmark for refinement at every price point. Owners of this generation know the interior is exceptional from the factory, but for those who want to push personalisation further, the stock trim surfaces offer a natural canvas for upgrading to something with real material presence. These carbon fiber center console and dashboard trim strips are made from genuine woven carbon fiber — not a vinyl wrap, not a hydrographic print — with a high-gloss lacquer finish that catches light the way only real carbon does. Each strip is cut and profiled specifically for the L460's interior geometry, meaning the fitment is precise and the visual result is seamless rather than approximate. Installation is non-invasive and entirely reversible. The strips mount via pre-applied 3M automotive-grade adhesive tape, the same bonding system used in OEM interior production worldwide. No drilling, no clipping, no risk to your vehicle's surfaces. The result is an upgrade that looks factory-built but takes under an hour to complete. What's Included 🪢 Carbon Fiber Trim Strips Full set for center console & dashboard surfaces 🔲 Pre-Applied 3M Adhesive Automotive-grade bonding tape on each strip 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine woven carbon fiber — not vinyl, not hydrographic print High-gloss lacquer topcoat for depth and protection Pre-applied 3M automotive adhesive — no additional tools needed Precision-profiled for the L460 interior geometry Covers center console and dashboard trim zones Fully reversible — no permanent modification to your vehicle 100% brand new, quality-inspected before dispatch Lightweight — adds zero perceptible weight to trim surfaces Resistant to UV fade and interior heat cycles Compatible with all L460 trim specifications including Autobiography Compatibility Model Code Year Range Fitment Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 30–60 Minutes  |  🔧 Tools Required: None Thoroughly clean each trim surface with an isopropyl alcohol wipe and allow to dry completely. Dust, grease or silicone residue will compromise adhesion. Dry-fit each strip to its corresponding position before removing the adhesive backing — confirm alignment and orientation first. Peel the 3M adhesive backing and carefully position the strip onto the surface, starting from one end and working progressively to avoid air pockets. Apply firm, even pressure along the full length of each strip for a minimum of two minutes — pay particular attention to edges and corners. In ambient temperatures below 15°C (59°F), gently warm the adhesive side using a hair dryer on a low heat setting before pressing to improve bonding performance. Avoid any moisture contact on the bonded surfaces for at least 72 hours post-installation to allow the adhesive to fully cure. ⚠ Important: Surface preparation is the single most important factor in a long-lasting fit. Do not skip the cleaning step or apply strips to surfaces treated with interior dressings or conditioners. If you are unsure about fitment for your specific trim variant, contact us before installation. Built for Owners Who Care At Victorious Automotive, every product we stock is selected for one reason: it has to be worthy of the vehicle it goes on. These carbon fiber trim strips meet that standard — real material, proper fit, no compromises. Shop All L460 Vogue Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Sport L461 · Exterior SV Gloss Black Front Grille – Range Rover Sport 2022–2024 (L461) Give your L461 Sport the dark, commanding presence of the SV with a direct-fit gloss black grille that bolts on cleanly and transforms the front end in one upgrade. L461 2022–2024 Gloss Black SV-Style ABS Construction OEM Direct Fit UV-Resistant Exterior Upgrade Overview The Range Rover Sport L461 arrived as one of the most dynamically focused vehicles Land Rover has produced — and its front-end design reflects that intent. But for owners who want to push the aesthetic further, the standard factory grille leaves room for a more assertive statement. The 2022–2024 Sport sits in a class where visual presence matters just as much as performance, and the front grille is the single most defining element of that presence. This SV-style Gloss Black Front Grille is engineered to replace your factory unit with a direct OEM-specification fit, delivering the same commanding, blacked-out look as the top-of-range SV trim. Finished in a deep, high-gloss black coating that is both UV-resistant and weatherproof, it eliminates any chrome or silver detailing from the front fascia in favour of a stealth aesthetic that reads as intentional and premium — not an afterthought. Constructed from durable ABS plastic — the same category of material used across OEM interior and exterior trim on vehicles of this class — the grille is lightweight without compromising on rigidity or impact resistance. Whether you're building a full blackout specification Sport or simply replacing an ageing factory grille with something more considered, this is the cleanest way to do it. What's Included 🔲 SV Gloss Black Front Grille 1 x complete grille assembly, ready to fit 🔩 Mounting Hardware All clips and fixings required for installation 📄 Fitting Guide Step-by-step installation reference Product Highlights SV-inspired design — mirrors the top-trim front-end aesthetic Deep gloss black finish — rich, consistent shine across the full face UV-resistant coating — retains colour and gloss in all climates Weatherproof construction — tested against rain, heat, and road debris Direct OEM replacement — no cutting, drilling, or coding required ABS construction — lightweight, impact-resistant, and dimensionally stable Precise factory-spec fitment — aligns flush with all surrounding trim Removes all chrome detailing — ideal for blackout builds Compatible with all non-SV trim levels — SE, Dynamic SE, HSE, Autobiography Instant kerb presence upgrade — one of the highest-impact exterior changes available Compatibility Vehicle Code Year Range Trim Fitment Range Rover Sport L461 2022–2024 SE Direct Fit Range Rover Sport L461 2022–2024 Dynamic SE Direct Fit Range Rover Sport L461 2022–2024 HSE Direct Fit Range Rover Sport L461 2022–2024 Autobiography Direct Fit Range Rover Sport L461 2022–2024 SV (factory grille) Not Required Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tools, T20/T25 Torx, panel clip pliers Ensure the vehicle is parked on a level surface with the engine off and cooled. Open the bonnet for better access to the upper grille mounting points. Using trim removal tools, carefully release the upper and lower bumper cover clips that retain the front fascia surround — take care not to crack surrounding trim. Disconnect any active grille shutter connectors if present on your specific variant (Dynamic SE and above may have active shutters — note the wiring routing before removal). Remove the factory grille by releasing all retaining clips and Torx screws along the grille perimeter, working from the centre outward. Offer up the new SV Gloss Black Grille, ensuring all mounting tabs align correctly with the factory aperture and bumper surround. Secure from the centre outward, pressing all clips fully home until you feel a positive click. Refit and tighten all Torx fasteners to OEM torque — do not overtighten. Reconnect any shutter or sensor connectors disturbed during removal. Refit the bumper cover clips and confirm flush alignment before closing the bonnet. Note: This is a complete grille replacement, not an overlay. It is designed for vehicles that have not left the factory with an SV grille fitted. Professional installation is recommended to ensure correct panel alignment and to avoid damage to the bumper surround or adjacent trim. If in doubt, consult a qualified Land Rover specialist. Elevate the Front End. Define the Build. The grille is the first thing anyone sees. This upgrade makes sure what they see reflects the quality of everything behind it. Explore the full Range Rover Sport L461 exterior collection at Victorious Automotive — and use code 22GET20 to save 20% when you add any two items. Shop Range Rover Sport L461 → 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used solely for fitment reference purposes. Always verify compatibility with your specific vehicle specification before purchasing.

Victorious Automotive · Range Rover L460 & Sport L461 · Interior Upgrades Carbon Style Start Stop Button Cover for Range Rover Vogue L460 & Range Rover Sport L461 (2023–2024) A precision-crafted carbon fibre and aluminium alloy button surround that brings a motorsport-inspired finish to the ignition area of your new-generation Range Rover — no drilling, no modification, no compromise. Range Rover L460 Sport L461 2023–2024 Carbon Fibre Style Aluminium Alloy Scratch Resistant Adhesive Fit Interior Trim Overview The 2023–2024 Range Rover Vogue L460 and Range Rover Sport L461 already set the standard for modern luxury SUV interiors — but for owners who want to push that a step further, the details matter. The start/stop button sits at the heart of the cabin experience, touched at every journey's beginning and end. It deserves to look the part. This carbon style start stop button cover is purpose-built for the L460 and L461 platforms, designed to sit flush over the OEM button surround with no visible gaps, no misalignment and no need to touch a single screw. Constructed from genuine carbon fibre weave topped with a protective resin coat, and backed with a quality aluminium alloy core, it delivers a weight and rigidity that immediately sets it apart from lower-cost alternatives. The result is a subtly elevated interior detail that complements Sport or SE specification trim levels alike — adding that distinctive carbon texture that occupants notice without overwhelming the sophisticated aesthetic Land Rover has engineered into these vehicles. What's Included 🟫 Start Stop Button Cover 1 × carbon style surround, pre-cut for L460/L461 fitment 🔲 Double-Sided Adhesive Pre-applied 3M-grade tape for secure, residue-free bonding 🧼 Cleaning Wipe Alcohol prep wipe for surface preparation before fitting Product Highlights Genuine carbon fibre weave with protective resin coating Aluminium alloy core for structural rigidity and premium feel Precision-cut profile for flush fitment on L460 and L461 platforms Scratch and wear resistant surface for long-term durability Pre-applied 3M-grade double-sided adhesive for a clean install No drilling, no modification to OEM components required Fully reversible — OEM button untouched beneath the cover Compatible with both carbon fibre and silver colourways Lightweight addition with zero impact on button function Designed and tested specifically for 2023–2024 model years Compatibility Vehicle Platform Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Sport L461 2023–2024 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Beginner Ensure the vehicle is parked with the engine off and ignition disengaged. Use the included alcohol prep wipe to thoroughly clean the existing start stop button surround. Allow 60 seconds to dry completely — any residue or moisture will affect adhesion. Peel the protective backing from the double-sided adhesive on the rear of the carbon cover. Carefully align the cover over the start stop button, using the pre-cut profile to guide placement. Do not press down yet — confirm alignment first. Once positioned correctly, apply firm, even pressure for 30–60 seconds to activate the adhesive bond. Allow a minimum of 2 hours before subjecting the area to vibration or moisture for optimal cure. ⚠ Note: Ensure the button surround is completely dry and free of wax, polish or dashboard protectant before fitting. Applying the cover to a treated surface may reduce long-term adhesion. Images shown are for reference purposes — minor variation in exact profile may occur across different trim specifications within the L460 and L461 range. Elevate Every Detail At Victorious Automotive, we source interior upgrades that respect the engineering of your Range Rover — not fight it. This carbon style start stop cover is one of the simplest, highest-impact changes you can make to the cabin. Browse our full collection of L460 and L461 interior accessories and save when you bundle. Shop Range Rover L460 Accessories Shop Range Rover Sport L461 Accessories Buy any 2 items and save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Real Carbon Fiber Inner Door Panel Covers – Range Rover Vogue L460 2023 Precision-cut genuine carbon fiber door panel inserts, tailored for an exact fit on the 2023 Range Rover Vogue L460 — elevating your cabin with a motorsport-grade finish. Range Rover Vogue L460 2023 Model Year Real Carbon Fiber Interior Trim Door Panel Covers No Drilling Required Direct Fit Scratch Resistant Overview The 2023 Range Rover Vogue L460 represents a new generation of refinement — a cabin that blends clean, architectural surfaces with understated luxury. For owners who want to take that interior a step further, the factory finish, while exceptional, leaves room for personalisation that speaks to a more driver-focused aesthetic. These real carbon fiber inner door panel covers are engineered specifically for the L460 platform, matching the exact contours of each door trim surface. Unlike generic interior wraps or ABS imitation pieces, these covers are crafted from genuine woven carbon fiber, giving you authentic weight savings alongside the distinctive layered weave pattern that no vinyl alternative can replicate. The result is a subtle but immediately noticeable upgrade — the kind that complements the Vogue's luxury positioning without clashing with it. Whether you're building a full carbon interior or simply adding one well-chosen accent, these door panel covers are a precision-made, no-compromise choice for the discerning L460 owner. What's Included 🚪 Carbon Fiber Door Panel Covers Full set to cover inner door panels; quantity matches vehicle door configuration 🔧 Pre-Applied Adhesive Backing Industrial-grade double-sided tape pre-fitted to each panel 📦 Original Protective Packaging Panels shipped in rigid protective packaging to prevent transit damage 📋 Installation Guide Step-by-step reference to ensure a clean, flush fitment first time Product Highlights Genuine woven carbon fiber construction — not ABS plastic with a printed finish Precisely cut to match the door panel geometry of the 2023 Range Rover L460 High-gloss clear coat lacquer applied over carbon weave for depth and durability Scratch and wear-resistant surface maintains appearance through daily use Pre-applied double-sided adhesive for a clean, tool-free installation No drilling, cutting, or permanent modification to your vehicle required Lightweight by nature — carbon fiber adds visual impact without added bulk UV-stable finish resists fading and discolouration over time Manufactured to exacting tolerances in a quality-controlled facility Pairs perfectly with other L460 carbon fiber interior trim components Compatibility Model Generation / Code Year Range Fitment Range Rover Vogue L460 2023 Direct Fit Range Rover Vogue L460 2022 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 minutes  ·  🔩 Tools Required: None Thoroughly clean all door panel surfaces to be covered using an isopropyl alcohol wipe. Remove any dust, oils, or residue that could compromise adhesion. Allow all surfaces to dry completely and ensure the cabin temperature is above 15°C — cold surfaces can significantly reduce adhesive bond strength. Dry-fit each carbon fiber cover against the corresponding door panel to confirm alignment before removing the adhesive backing. Peel back a small section of the adhesive liner, align the top edge of the cover carefully, and press down progressively from one end to the other to avoid air pockets. Once positioned, apply firm, even pressure across the entire surface for 30–60 seconds per panel. Pay particular attention to corners and edges. For best results, avoid washing the interior surfaces or exposing the panels to direct moisture for 24 hours after installation to allow full adhesive cure. ⚠ Important: Always confirm your exact vehicle trim variant and model year before fitting. Interior panel profiles can vary between specification levels and build dates, even within the same model year. If in doubt, contact us before installation. Upgrade Your L460 Interior Today Explore the full range of Range Rover Vogue L460 interior accessories at Victorious Automotive — curated specifically for owners who demand precision, quality, and authenticity. Shop All L460 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Carbon Style Dash Trim – Range Rover Vogue L460 2023–2024 A precision-fit carbon fibre aesthetic upgrade that transforms the dashboard of your L460 Vogue with a refined, performance-inspired finish — no cutting, no drilling, no compromise. L460 Vogue 2023–2024 Carbon Style ABS Dash Trim Direct Fit Interior Upgrade Scratch Resistant No Drilling Required Overview The fifth-generation Range Rover Vogue — the L460 — is arguably the most refined and architecturally considered Range Rover ever built. Its interior sets a benchmark for luxury SUV cabins worldwide, with sweeping surfaces, precision-milled details, and a driver-focused cockpit that balances technology with restraint. For owners who want to build on that foundation without straying from it, the choice of interior accent trim matters greatly. This carbon style dash trim is engineered specifically for the 2023 and 2024 Range Rover Vogue L460. Produced from high-quality ABS with a detailed carbon fibre weave surface finish, each piece is contoured to follow the exact geometry of the L460's dashboard architecture. The result is a seamless integration that looks factory-considered rather than aftermarket-added — precisely the standard that L460 owners should expect. Where the standard trim presents a clean, neutral aesthetic, the carbon style finish introduces a layer of visual depth and sporting character without disrupting the cabin's premium feel. It's the kind of change that draws a second glance from those who know the car — and that's exactly the point. What's Included 🧩 Complete Dash Trim Set Full set of carbon style panels for the L460 dashboard 📋 Installation Guide Step-by-step instructions included in the box 📦 Protective Packaging Each piece individually wrapped to prevent transit damage 🔧 Fitting Hardware Pre-applied adhesive backing for tool-free installation Product Highlights Precision-engineered for the 2023–2024 Range Rover Vogue L460 dashboard High-quality ABS construction with a durable carbon fibre weave surface Scratch and wear-resistant finish for long-term interior integrity Direct OEM-profile fit — no trimming, cutting, or modification required Tool-free installation — fits over existing trim with pre-applied adhesive Adds sporting visual depth without altering the cabin's premium character Lightweight material that does not add stress to existing dashboard fixings UV-stable finish resists fading and discolouration over time 100% new — supplied in original branded packaging with box Compatible with both left-hand drive and right-hand drive L460 variants Compatibility Vehicle Code Year Range Trim Level Fitment Range Rover Vogue L460 2023–2024 Vogue / SE / Autobiography Direct Fit Range Rover Vogue L460 2022 All Trims Verify Before Purchase Range Rover Vogue L405 2013–2021 All Trims Not Compatible Range Rover Sport L461 2022–2024 All Trims Not Compatible Range Rover Sport L494 2013–2022 All Trims Not Compatible Defender L663 2020–2024 All Trims Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: None Begin with a clean, dry interior — wipe down existing dashboard trim panels using an isopropyl alcohol wipe to remove all oils, dust, and residue. Allow to dry fully before proceeding. Unpack each trim piece carefully and dry-fit it against the corresponding dashboard section before committing to adhesion. Confirm alignment and panel orientation at this stage. Peel back the protective film on the pre-applied adhesive strips. Align the trim piece from one edge, pressing firmly along the length of the panel to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of each fitted piece for 30–60 seconds to ensure the adhesive bonds fully to the underlying trim surface. Repeat for all remaining panels in the set. Allow the full installation to cure for a minimum of 2 hours before exposing the cabin to temperature extremes or pressure. ⚠ Important: Confirm your exact model year and trim specification before purchase. Early 2022 L460 models may have dashboard geometry variations that affect panel fitment. If you are unsure, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your L460 Interior Today Join over 12,300 Range Rover owners who trust Victorious Automotive for premium interior upgrades. Browse the full collection of L460 Vogue accessories — or call our specialists if you need fitment advice before ordering. Shop All L460 Vogue Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert advice Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and manufacturer references are used solely for fitment identification purposes. Range Rover, Vogue, L460, and all associated marks are trademarks of their respective owners.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Boot Trunk Switch Carbon Trim — Range Rover Vogue L460 (2023–2024) A precision-crafted ABS carbon fibre finish trim that upgrades your L460's boot switch panel with a sharp, consistent look that complements the Vogue's signature interior language. Range Rover Vogue L460 2023–2024 Carbon Fibre Finish ABS Material Direct Fit Interior Trim Boot Trunk Switch No Drilling Overview The Range Rover Vogue L460 sets a new benchmark for modern luxury SUVs. Its cabin is a carefully considered space — every surface, material, and detail curated to create a sense of calm refinement. For owners who want to take that experience one step further, precision interior trim upgrades offer a meaningful and lasting way to personalise the vehicle without compromising its factory character. This boot trunk switch carbon trim is engineered specifically for the 2023 and 2024 model year Range Rover Vogue L460. It fits directly over the existing boot switch surround panel, replacing the standard finish with a high-quality carbon fibre effect that integrates naturally with the darker tones and technical aesthetic common across the L460's interior trim palette. Constructed from durable ABS with a carbon fibre appearance finish, this trim resists everyday scratching and surface wear far better than standard factory plastics — particularly in a high-contact area like the boot switch. The result is a cleaner, more refined rear interior that holds its appearance over time and makes an impression every time the boot is opened. What's Included 🪄 Boot Trunk Switch Carbon Trim 1 piece — carbon fibre effect ABS finish 📦 Protective Packaging Brand new, boxed and ready to fit 🔧 Adhesive Backing Pre-applied for clean, tool-free fitment Product Highlights Precision-moulded ABS construction for a tight, factory-quality fit on the L460 boot switch panel Carbon fibre effect finish that complements dark interior trims and gloss accents throughout the Vogue cabin Scratch and abrasion resistant surface — engineered to maintain appearance in a high-use area No drilling, cutting, or permanent modifications required — fully reversible upgrade Pre-applied adhesive backing for a clean, professional installation without additional tools 100% brand new and boxed — never refurbished or remanufactured Lightweight and low-profile — adds zero bulk to the original panel geometry UV-stable finish prevents fading or discolouration from natural interior light exposure Designed to pair seamlessly with other L460 carbon interior trim upgrades from Victorious Ships worldwide via tracked courier — DHL, FedEx, UPS and TNT available at checkout Compatibility Model Code Years Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L460 2022 Verify Before Purchase Range Rover Sport L461 2022–2024 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Open the boot of your Range Rover Vogue L460 fully and locate the existing boot trunk switch panel surround. Clean the surface of the factory panel thoroughly using an isopropyl alcohol wipe, removing any dust, grease, or fingerprints. Allow to dry completely before proceeding. Remove the protective backing from the adhesive on the carbon trim piece and dry-fit it against the panel first to confirm alignment and positioning. Once satisfied with the alignment, press the trim firmly into place from the centre outward, applying even pressure across the entire surface for 30–60 seconds to ensure a secure bond. Allow the adhesive to cure for a minimum of 24 hours before operating the boot switch repeatedly or exposing the vehicle to water. ⚠ Note: Installation instructions are not included in the package. If you are unsure about any step, we recommend consulting a professional installer. Ensure your vehicle model year is confirmed before fitting. This trim is designed for the L460 2023–2024 specifically — fitting on an incompatible variant may result in poor alignment or adhesive failure. Upgrade Your L460 Interior Today Every detail counts in the Range Rover Vogue. This boot trunk switch carbon trim is a small change that makes an immediate, lasting impression — and it's backed by our 30-day money-back guarantee and 4.9-star rated service. Shop All L460 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or in any way connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All brand names, vehicle codes, and model references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Chrome Stainless Steel Quad Exhaust Covers for Range Rover Sport L461 2023–2024 A precision-fit quad exhaust styling upgrade that brings instant visual impact to the rear diffuser of the new Range Rover Sport L461 — no tools required. Range Rover Sport L461 2023–2024 Chrome Finish ABS Construction Quad Exhaust Adhesive Fit Exterior Styling Brand New Overview The Range Rover Sport L461 is a vehicle that commands attention from every angle — and few details define the rear of a performance SUV more clearly than the exhaust outlets. The L461 generation introduced a bolder, more sculpted rear design, and these quad exhaust covers are engineered specifically to complement that visual language, adding a layer of definition and contrast that the standard finish simply doesn't offer. Each cover is moulded from high-grade ABS and finished in a deep chrome that mirrors the aesthetic of factory performance trim packages. The result is a rear end that reads as more aggressive and more premium at the same time — a balance the Range Rover Sport wears naturally. Whether your Sport is finished in a dark satin or a bold gloss, chrome at the exhaust outlets is a classically effective contrast. What makes this upgrade particularly compelling for Sport owners is the installation method. Using a professional-strength double-sided adhesive, these covers fit directly over the existing exhaust surrounds without any cutting, drilling or modification. The finish is clean, the fitment is snug, and the transformation is immediate. It is the kind of detail that looks factory-fitted once in place. What's Included 🔩 Exhaust Covers × 4 Full quad set covering all four outlets 🔲 Pre-Applied Adhesive Double-sided tape pre-fitted to each piece 📄 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Chrome surfaces protected for transit Product Highlights Precision-engineered specifically for the L461 Range Rover Sport rear diffuser Deep chrome ABS finish that holds its lustre in all weather conditions Full quad set — covers all four exhaust outlets for a balanced, uniform look Adhesive installation requires no drilling, cutting or mechanical work Lightweight construction adds zero perceptible weight to the vehicle Chrome finish complements both dark and light exterior colour combinations Resistant to heat, moisture and car wash chemicals when correctly fitted 100% brand new — not refurbished, not second-hand Removable without permanent damage to the factory exhaust surround Visually aligns the rear of the Sport with higher-spec performance trim aesthetics Compatibility Vehicle Code Years Fit Range Rover Sport L461 2023–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L460 2022–2024 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 minutes  ·  🔧 Tools Required: None Ensure the vehicle has been stationary and the exhaust system is fully cool before beginning. Never work near a hot exhaust. Thoroughly clean the exhaust surround area using an isopropyl alcohol wipe or similar degreaser. Allow the surface to dry completely before proceeding. Dry-fit each cover against its corresponding exhaust outlet to confirm alignment and confirm the correct cover for each position. Peel the protective backing from the double-sided adhesive tape on the first cover. Press the cover firmly and evenly onto the exhaust surround, holding for 30–60 seconds to allow the adhesive to bond. Repeat for all remaining covers, checking alignment as you go. Allow 2–4 hours before washing or driving through wet conditions to allow the adhesive to fully cure. ⚠ Important: Always allow the exhaust to cool completely before handling or fitting these covers. Installation on a warm or hot surface may affect adhesive bonding and could cause surface distortion. Clean the mounting surface thoroughly — any grease or wax residue will reduce adhesion significantly. Complete the Look of Your Range Rover Sport Explore the full Victorious range of exterior styling accessories designed exclusively for the Range Rover Sport L461 — from gloss black trim finishers to bespoke body kit components. Shop Range Rover Sport L461 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Aftermarket · Dodge RAM · Infotainment Qualcomm Android 11 Tesla Screen Radio Receiver – Dodge RAM 1500/2500 (2020–2021) Transform your RAM 1500/2500 with a premium 11.8-inch Tesla-style display, Android 11 performance, and seamless CarPlay integration—the ultimate modern infotainment upgrade. Dodge RAM 1500/2500 2020–2021 Android 11 11.8-inch Display CarPlay High-Res Touch Overview Your 2020–2021 Dodge RAM 1500 and 2500 deserve infotainment technology that matches their capability and presence on the road. Factory systems often feel dated and limited—this Qualcomm Android 11 Tesla Screen Radio Receiver is engineered to replace all that with something genuinely modern. The centrepiece is a stunning 11.8-inch touchscreen with 1920×1080 resolution, powered by a high-performance GT6 CPU, 4GB DDR3 RAM, and 64GB Nand Flash storage. It's not just a pretty interface—it's a fully-featured Android 11 multimedia system designed for real-world driving. Stream music, run navigation apps, take hands-free calls, and manage your vehicle via CarPlay, all with lightning-fast response times and no stuttering. Installation is straightforward for most owners; the unit drops into your existing dashboard opening. Whether you're commuting in the city or towing across state lines, this system keeps you connected, entertained, and in control—a transformative upgrade that redefines every journey. What's Included 📺 11.8-inch Tesla Screen Display 1920×1080 resolution, capacitive touch ⚙️ Qualcomm GT6 CPU High-performance processor 💾 4GB DDR3 RAM + 64GB Storage Smooth multitasking, ample app space 📱 Apple CarPlay Integration Seamless iPhone connectivity 🔧 Installation Hardware Brackets, connectors, and wiring harness 📖 User Manual & Support Full documentation and online guides Product Highlights 11.8-inch Tesla-Style Display – 1920×1080 HD, ultra-responsive capacitive touchscreen Android 11 Operating System – Intuitive, fast, and regularly updated platform GT6 Processor – Handles multitasking, gaming, and navigation without lag 4GB DDR3 RAM – Effortless app switching and real-time performance 64GB Nand Flash Storage – Load your entire music library, podcasts, and apps Apple CarPlay Ready – Mirror iPhone for hands-free calls, navigation, music streaming Plug-and-Play Installation – Direct fit; no custom fabrication required Steering Wheel Controls Compatible – Retain factory steering wheel button functionality Backup Camera Input Support – Integrate existing or new reverse camera Premium Audio Output – High-quality speakers and subwoofer-ready connectivity Compatibility Model Year Fitment Dodge RAM 1500 (Crew Cab) 2020–2021 Direct Fit Dodge RAM 1500 (Quad Cab) 2020–2021 Direct Fit Dodge RAM 1500 (Regular Cab) 2020–2021 Direct Fit Dodge RAM 2500 (All Cabs) 2020–2021 Direct Fit Dodge RAM 3500 2020–2021 Not Compatible Dodge RAM 1500 / 2500 2019 or earlier Not Compatible Installation 📌 Installation Overview Difficulty: Intermediate | Time: 1.5–2.5 hours | Tools Needed: Panel removal tools, screwdrivers, wire crimpers (optional) Disconnect the negative battery terminal to cut all power to the vehicle's electrical system. Remove the dashboard trim panels and bezel around the original radio unit using panel removal tools. Take care to avoid scratching the plastic. Unbolt the factory radio from the mounting bracket and unplug all connectors (antenna, power, speaker, steering wheel controls). Install the new unit into the dashboard opening, ensuring it sits flush and secure in the mounting bracket. Connect the power harness to the vehicle's power supply; match the wiring diagram included with the unit. Plug in the antenna connector and speaker connectors, ensuring each is seated firmly. If using a backup camera, connect the camera input to the designated port on the rear of the unit. Route all wiring harnesses neatly behind the dashboard to avoid pinching or obstruction. Reinstall the dashboard trim panels, ensuring all clips and screws are secure. Reconnect the battery, power on the unit, and test all functions: touchscreen, CarPlay, microphone, and steering wheel controls. ⚠️ Important: If you are not confident with vehicle electronics or dashboard removal, we strongly recommend professional installation by a qualified car audio technician. Improper installation can result in electrical issues or damage to your RAM's dashboard. Victorious Automotive is not liable for installation errors. Ready to Upgrade Your RAM? Transform your 2020–2021 Dodge RAM 1500/2500 with cutting-edge infotainment technology. Every drive becomes smarter, faster, and infinitely more enjoyable. Order your Qualcomm Android 11 Tesla Screen Radio Receiver today. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT ☎ +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Dodge, Chrysler Corporation, or FCA US LLC. All product names, logos, and trademarks are the property of their respective owners. This product is designed to be compatible with vehicles listed; fitment may vary by trim, region, and factory options. Installation is at your own risk. We recommend professional installation if you lack experience with vehicle electronics. Victorious Automotive bears no responsibility for improper installation, electrical damage, or warranty voidance on your vehicle.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fiber Central Control Storage Box Partition Cover Trim — Land Rover Defender L663 90, 110 & 130 (2020–2023) Instantly refine your Defender's centre console with precision-fit carbon fibre-finish partition covers that blend seamlessly with the cabin's bold, functional aesthetic. Defender L663 2020–2023 90 · 110 · 130 ABS Carbon Fibre Finish Peel & Stick Install Interior Trim 2-Piece Set Brand New Overview The Land Rover Defender L663 is one of the most capable and characterful vehicles on the road — a machine built to perform as well as it looks. The interior of the 2020–2023 generation has been designed with purpose in mind, but for owners who want to push the cabin's finish a little further, the details matter. The central control storage area is one of the most frequently used spaces in the cabin, and a quality trim upgrade here makes a noticeable difference every time you sit behind the wheel. These ABS Carbon Fiber Central Control Storage Box Partition Cover Trims are designed specifically for the Defender L663 platform — covering all three body lengths: the compact 90, the versatile 110, and the long-wheelbase 130. Manufactured from high-grade ABS plastic with a precision carbon fibre texture finish, each piece delivers the visual weight of real carbon fibre without the associated fragility or cost, sitting cleanly against the factory surfaces for a result that looks like it left the factory that way. Installation requires no tools and no professional fitting. The double-sided adhesive backing means you can transform the look of your Defender's centre console in under ten minutes. Whether you're building out a full interior refresh or simply looking for a single, well-chosen upgrade, these covers offer strong visual impact with minimal effort — exactly how a Defender modification should work. What's Included 🪟 Partition Cover Trim × 2 Left and right pieces for full coverage of the central storage box partition 🔲 Pre-Applied Adhesive Double-sided tape pre-fitted to the reverse of each panel — no separate adhesive required 📋 Installation Guide Step-by-step fitting instructions included in the packaging 📦 Protective Packaging Each set is individually packaged to ensure safe, scratch-free delivery Product Highlights Precision-cut to fit the Defender L663 central control storage partition exactly High-grade ABS plastic construction — rigid, lightweight, and built to last Carbon fibre texture finish adds a premium, sporty character to the cabin Pair of covers supplied — complete left and right fitment in one purchase No tools required — installs in minutes with pre-applied double-sided adhesive Resistant to everyday wear, UV exposure, and temperature fluctuations inside the cabin Compatible with all 2020–2023 Defender L663 variants: 90, 110, and 130 Designed to sit flush against factory surfaces with no visible gaps or proud edges Brand new condition — quality-checked before despatch from our warehouse Pairs well with other L663 interior trim upgrades for a fully coordinated finish Compatibility Model Code Year Range Body Length Fitment Land Rover Defender 90 L663 2020–2023 Short Wheelbase Direct Fit Land Rover Defender 110 L663 2020–2023 Standard Wheelbase Direct Fit Land Rover Defender 130 L663 2020–2023 Long Wheelbase Direct Fit Land Rover Defender (Classic) Pre-L663 Pre-2020 All Not Compatible Range Rover Sport L461 / L494 All All Not Compatible Range Rover Vogue L460 / L405 All All Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry interior. Use an isopropyl alcohol wipe to thoroughly degrease the surface of the central control storage box partition where the covers will be applied — this is the most important step for long-term adhesion. Allow the cleaned surface to dry completely for 1–2 minutes before proceeding. Test-fit both partition covers in position without removing the adhesive backing to confirm correct placement and orientation. Peel the protective film from the double-sided adhesive on the back of the first cover, carefully align it to the partition surface, and press firmly into place, working from the centre outward to eliminate any air pockets. Repeat for the second cover on the opposite side. Apply firm, even pressure across the entire surface of each cover for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure at room temperature for a minimum of 24 hours before exposing the trim to extremes of heat or cold. ⚠ Note: Do not attempt installation in cold conditions below 10°C, as adhesive performance may be reduced. Avoid applying in direct sunlight or on a very hot dashboard surface. Once bonded, removal may affect the factory trim surface beneath — fit with care. Complete Your Defender L663 Interior These partition covers are just the beginning. Explore our full range of Land Rover Defender L663 interior accessories — all designed to the same standard of fit, finish, and material quality. Shop Defender L663 Interior Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory parts. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes are used solely for fitment reference purposes. Always verify compatibility with your specific vehicle before purchase. If you have any questions, our team is available on +44 203 943 9919 or via our website chat.

Victorious Automotive · Universal Fit · In-Car Technology Universal Apple CarPlay & Android Auto Receiver — Works With Any Car A 7-inch wireless touchscreen display that brings Apple CarPlay and Android Auto to any vehicle with a 12V port — no head unit replacement required. Universal Fit Apple CarPlay Android Auto 7" IPS Display Wireless Connectivity Bluetooth FM Transmitter 12V Plug-In Dash Mount Voice Control Overview Whether you're driving a Range Rover L405, a Defender L663, a Discovery 4, or any other vehicle that predates integrated smartphone mirroring, the absence of Apple CarPlay or Android Auto is one of the most frustrating cabin compromises. Modern navigation, music streaming, messaging, and hands-free calling are now essential — and retrofitting factory infotainment is often expensive, invasive, and warranty-affecting. This Universal CarPlay and Android Auto Receiver from Victorious Automotive solves that problem cleanly. The 7-inch IPS touchscreen mounts directly to your dashboard or windshield via a secure suction mount, plugs into your 12V cigarette lighter socket, and connects to your iPhone or Android device via your standard charging cable. No wiring looms, no dashboard disassembly, no coding required. Within minutes, your vehicle gains a fully functional CarPlay or Android Auto interface — complete with Google Maps, Waze, Apple Maps, Spotify, WhatsApp, Siri, and Google Assistant. The built-in FM transmitter broadcasts audio wirelessly to your car's existing speakers on any FM frequency you choose, while Bluetooth pairing covers calls and music independently of the CarPlay or Android Auto session. It powers on automatically with your ignition, charges your phone via the onboard USB port while in use, and includes ventilation ports to manage heat during long drives or in high-temperature climates. A genuinely practical upgrade for any vehicle owner who wants smartphone integration without compromising their original interior. What's Included 📺 7" IPS Touchscreen Receiver Main display unit with CarPlay & Android Auto 🔧 Suction Dashboard Mount Windshield or dash-top mounting arm 🔌 12V Cigarette Lighter Adapter Powers the unit from any 12V port 📖 User Instruction Guide Setup and pairing reference Note: Phone charging cable (Lightning or USB-C) not included. Use your standard device cable. Product Highlights Wireless Apple CarPlay and Android Auto via 7" IPS touchscreen Wired USB connection for CarPlay, Android Auto, and simultaneous phone charging Built-in FM transmitter — broadcasts audio to your car's existing speakers Bluetooth pairing for calls and music independently of CarPlay/Android Auto Voice control via Siri or Google Assistant — fully hands-free operation Auto power-on with ignition — no manual button press required Built-in USB charging port on the side of the unit Ventilation ports for heat management in warm climates and direct sunlight Compatible with any vehicle with a 12V port and FM radio Supports Waze, Google Maps, Apple Maps, Spotify, SiriusXM, WhatsApp & more Vehicle Compatibility Vehicle Years Compatibility Notes Range Rover Vogue L460 2022–2026 Direct Fit Supplemental display — use 12V port Range Rover Sport L461 2022–2026 Direct Fit Supplemental display — use 12V port Defender L663 2020–2026 Direct Fit Supplemental display — use 12V port Range Rover Vogue L405 2013–2020 Direct Fit Ideal retrofit for pre-CarPlay models Range Rover Sport L494 2013–2020 Direct Fit Ideal retrofit for pre-CarPlay models Range Rover Velar 2018–2022 Direct Fit Supplemental display — use 12V port Land Rover Discovery 5 2017–2024 Direct Fit Works alongside existing InControl Land Rover Discovery 4 2009–2016 Direct Fit Ideal retrofit — no factory CarPlay Land Rover Discovery 3 2004–2009 Direct Fit Ideal retrofit — no factory CarPlay Land Rover Discovery Sport 2015–2024 Direct Fit Works alongside existing system Range Rover Evoque L551 2019–2024 Direct Fit Supplemental display — use 12V port Range Rover Evoque L538 2011–2018 Direct Fit Ideal retrofit — no factory CarPlay Range Rover Sport L320 2005–2013 Direct Fit Ideal retrofit — no factory CarPlay Land Rover Defender (Classic) 2004–2016 Direct Fit Works with any 12V outlet Toyota Land Cruiser LC300 2021–2026 Direct Fit Supplemental display — use 12V port Toyota Land Cruiser LC250 2024–2026 Direct Fit Supplemental display — use 12V port Mercedes G Class / G-Wagon 2019–2026 Direct Fit Supplemental display — use 12V port Any Vehicle Without FM Radio — Check First FM transmitter requires car FM radio Installation Notes Setup Guide — Estimated Time: 5–10 Minutes · No Tools Required Attach the suction mount to a clean section of your dashboard or windshield in a position that does not obstruct your primary view. Avoid placing directly over existing screens if you use a reversing camera on your factory display. Plug the 12V adapter into your vehicle's cigarette lighter socket. The unit will power on automatically when the ignition is turned on. Connect your iPhone or Android smartphone to the USB port on the side of the unit using your standard charging cable (Lightning for iPhone, USB-C for most Android devices). On your phone, accept the CarPlay or Android Auto prompt. The interface will appear on the 7-inch display immediately. Tune your car's FM radio to a clear, unused frequency. Set the same frequency on the unit's FM transmitter to route audio through your car speakers. For Bluetooth-only use (calls and music without CarPlay/Android Auto), navigate to the device's Bluetooth settings and pair your phone directly. Important: This is a supplemental, external display — it does not replace or integrate with your factory head unit or existing touchscreen. It will not interfere with your vehicle's electronics, CANBUS system, or existing InControl/MBUX interfaces. A wired USB connection to your phone is required to use CarPlay or Android Auto; the wireless label refers to the absence of a separate data cable beyond your charging cable. Steering wheel controls are not supported. SiriusXM requires app installation and an active subscription. Common Questions Answered Question Answer Does it replace my factory screen? No — it is an external supplemental display only Does it need a phone to function? Yes — it is not a standalone GPS or media player Does it work without a cable? CarPlay/Android Auto require a USB cable; Bluetooth works wirelessly Does it have a built-in AM/FM tuner? No — audio is routed via FM transmitter or AUX from your phone Does it support steering wheel controls? No — voice control via Siri or Google Assistant is recommended Does it auto-start with the car? Yes — powers on automatically with ignition Does it support Waze and Google Maps? Yes — via Android Auto; via CarPlay with iOS compatibility Will it get hot in direct sunlight? Ventilation ports help manage heat; dash placement advised over windshield Bring Your Cabin Into the Modern Era Whether you're upgrading a classic Defender, a pre-2015 Discovery, or simply adding a secondary display to a newer Range Rover, this receiver delivers the smartphone integration your drive deserves — in under ten minutes, with zero modifications. Shop All In-Car Technology Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Apple Inc., Google LLC, or any original equipment manufacturer. Apple CarPlay and Android Auto are trademarks of their respective owners. Always ensure mounted accessories do not obstruct driver visibility or violate local road safety regulations. Installation is at the owner's discretion.

Victorious Automotive · Range Rover Vogue L460 · Exterior Styling Gloss Black Exterior Pack – Replacement Pattern Kit for Range Rover Vogue L460 (2023+) A complete five-piece gloss black trim kit engineered to replace the standard silver exterior finishers on the Range Rover Vogue L460 — delivering a cohesive, stealthy presence with zero compromise on fit. L460 2023–2024+ Gloss Black ABS Plastic UV-Resistant De-Chrome Kit OEM-Style Fitment Replacement Pattern Parts Exterior Trim Direct Fit Overview The Range Rover Vogue L460 is one of the most architecturally considered luxury SUVs ever produced — and the exterior trim plays a defining role in how it reads on the road. For owners who want to move beyond the factory silver detailing, the contrast between polished chrome-effect finishers and the body's more sculpted, contemporary surfacing can feel at odds with the vehicle's otherwise bold character. This Gloss Black Exterior Pack from Victorious Automotive addresses that directly. Comprising five key trim components — front grille, side fender fins, front bumper inserts, rear side fins, and rear boot trim panel — the kit has been precision-moulded in high-grade ABS plastic and finished in a deep, UV-stabilised gloss black. Each piece is engineered to replace its factory counterpart using existing mounting points, with no cutting, drilling, or permanent modification required. Whether you're building a full de-chrome conversion or simply replacing a single damaged panel, this kit gives your L460 a sharper, more purposeful look — the kind of understated aggression that feels entirely at home on a vehicle of this calibre. It is the logical starting point for any serious exterior styling build on the 2023+ Range Rover Vogue. What's Included 🔲 Front Grille Deep gloss black finish; SV-style optional variant available ◀▶ Side Fender Fins (Left + Right) Paired gloss black quarter-panel fins; replaces factory silver finishers 🔳 Front Bumper Inserts Lower front apron inserts finished in matching gloss black 🔙 Rear Side Fins Gloss black rear quarter fins to complete the side profile 🔚 Rear Boot Trim Panel Tailgate-level trim panel in gloss black; ties the rear aesthetic together Product Highlights Deep gloss black finish with a consistent, mirror-like sheen across all five components UV-stabilised coating prevents fading, yellowing, or surface degradation over time Precision-moulded ABS plastic construction — lightweight, rigid, and impact-resistant OEM-style fitment using all factory mounting points — no drilling or cutting required Direct replacement for standard silver or chrome-effect factory trims on the L460 Weatherproof construction suitable for all-season, all-climate use Ideal for full de-chrome builds or targeted panel replacement after damage Compatible with all standard L460 Vogue trim levels (excluding factory Black Pack and SV models) Ships as a complete matched kit — all five pieces finished to the same gloss specification Professional installation recommended for optimal panel alignment and finish quality Compatibility Vehicle Code Year Range Trim Level Fitment Range Rover Vogue L460 2023–2024+ Standard / SE / HSE / Autobiography Direct Fit Range Rover Vogue L460 2023–2024+ Factory Black Pack Models Not Compatible Range Rover Vogue SV L460 2023–2024+ SV Bespoke Not Compatible Range Rover Vogue L405 2013–2021 All Variants Not Compatible Range Rover Sport L461 / L494 Any All Variants Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Trim removal tools, microfibre cloths, isopropyl alcohol Thoroughly clean all factory trim surfaces with isopropyl alcohol and allow to dry fully before beginning removal. Using a plastic trim removal tool, carefully release the factory silver or chrome-effect finishers from their mounting clips. Work from one edge progressively to avoid cracking the surrounding body panels. Inspect the underlying mounting points for damage or debris, cleaning each one before proceeding. Align each gloss black replacement component to its corresponding mounting points, pressing firmly until all clips engage fully. Begin with the front grille, then work rearward across the vehicle. Once all five pieces are fitted, inspect each panel under direct light to confirm consistent alignment and gap uniformity across all edges. Clean finished surfaces with a soft microfibre cloth to remove any fingerprints or handling marks before returning the vehicle to service. ⚠ Installation Note: Professional installation is strongly recommended to ensure correct panel alignment and to avoid stress marks on surrounding bodywork. Incorrect removal of factory trims may damage original clips — a small stock of replacement clips is advisable before beginning. Refined Styling. Bold Identity. The L460 deserves more than factory standard. This Gloss Black Exterior Pack is the most complete and cohesive way to transform the exterior character of your Range Rover Vogue — available exclusively through Victorious Automotive. Shop All L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. This is a high-quality replacement pattern part and is not a genuine Land Rover product.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Real Carbon Fiber Rear Air Vent Panel Cover – Range Rover Vogue L460 2023 Genuine woven carbon fibre trim engineered to replace the factory rear air vent surround on the L460 Vogue — a precise, no-compromise interior upgrade. L460 2023 Real Carbon Fibre Rear Air Vent Interior Trim 3-Piece Set Direct Fit Adhesive Install Overview The Range Rover Vogue L460 represents the pinnacle of Land Rover's design philosophy — a cabin engineered around refinement, restraint, and material integrity. Every surface is deliberate. Which is precisely why the details matter so much. The factory rear air vent surround is functional, but for owners who want that interior to feel truly bespoke, it leaves something on the table. This real carbon fibre rear air vent panel cover is designed to sit flush over the existing L460 vent surround, delivering the visual weight and texture of genuine woven carbon without modification to the underlying trim or structure. Unlike carbon-look vinyl or ABS with printed patterns, this cover is constructed from actual carbon fibre layup — the same material used across motorsport and high-performance automotive applications. The weave is tight, the lacquer is deep, and the finish catches light in a way that no imitation can replicate. The three-piece set covers the rear air vent panel comprehensively, maintaining the geometric precision the L460's interior demands. Installation is straightforward and non-destructive, using high-bond 3M-grade double-sided adhesive. Whether you're building out a full carbon interior or simply refining one key touchpoint, this panel cover delivers a result that looks factory — just considerably sharper. What's Included 🪟 Carbon Fibre Vent Panel Cover — Left Fits left-side rear air vent surround, L460 specific 🪟 Carbon Fibre Vent Panel Cover — Centre Fits centre rear air vent surround, L460 specific 🪟 Carbon Fibre Vent Panel Cover — Right Fits right-side rear air vent surround, L460 specific 🔳 Pre-Applied Adhesive Tape High-bond double-sided tape, factory applied to each piece Product Highlights Genuine woven carbon fibre construction — not vinyl, not ABS with print Deep gloss lacquer finish for a premium, showroom-quality result Engineered specifically for the Range Rover Vogue L460 2023 rear vent panel Three-piece set for full rear air vent surround coverage Pre-applied high-bond adhesive — no drilling, no permanent modification Lightweight material — adds zero meaningful mass to the vehicle Resistant to heat cycles, UV exposure, and interior cleaning products Flush, factory-style fitment with precise cutouts for vent louvers Non-destructive installation — fully reversible without damage to OEM trim Pairs cleanly with other L460 carbon fibre interior accessories Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L460 2023 Direct Fit Range Rover Vogue L460 2022 (pre-facelift check advised) Verify First Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2025 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Begin with the vehicle at ambient temperature. Avoid installation in direct sunlight or cold environments below 10°C, as this affects adhesive performance. Thoroughly clean the rear air vent surround panel using an IPA (isopropyl alcohol) wipe. Remove all dust, grease, and residue. Allow to dry fully — typically 2–3 minutes. Dry-fit each of the three carbon fibre covers against their respective vent positions to confirm alignment and seating before committing adhesive. Peel the backing from the pre-applied adhesive tape on the first piece. Align carefully with the vent panel surround and press firmly, holding for 30–60 seconds to seat the bond. Repeat for the remaining two pieces, working left to right or centre outward for the cleanest visual alignment. Apply firm, even pressure across the full surface of each piece for a final 60 seconds. Avoid disturbing the covers for at least 2 hours to allow the adhesive to cure fully. ⚠ Important: Do not use steam cleaners, abrasive cloths, or solvent-based cleaning products directly on the carbon fibre surface. A microfibre cloth with a mild interior detailer is all that's needed to maintain the finish. Complete the L460 Interior This rear air vent cover is one piece of a broader interior transformation. Explore our full Range Rover Vogue L460 accessories collection — curated for owners who hold their vehicles to the same standard as the engineers who built them. Shop L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue L405 · Exterior Body Kits Range Rover Vogue L405 SVO Body Kit Upgrade — 2013–2017 to 2018–2021 Facelift Conversion Transform your pre-facelift L405 Vogue into the sharper, more commanding 2018 SVO aesthetic — with a complete front-to-rear body conversion kit engineered for a factory-quality finish. Range Rover Vogue L405 2013–2017 to 2018–2021 SVO Facelift Conversion Bare Plastic – Ready to Paint Full Body Kit Front & Rear Upgrade Direct Fit Professional Install Recommended Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs ever produced — but the 2018 facelift brought a genuinely elevated design language that set it apart from earlier model years. The redesigned front and rear bumpers, revised lighting signatures, refreshed grille, and updated bodywork details gave the facelift car a distinctly more composed, contemporary presence. If your L405 was built between 2013 and 2017, this conversion kit is the most comprehensive way to bring it fully in line with the post-facelift specification. This SVO-style body kit has been developed specifically for the pre-facelift L405 platform, encompassing every major exterior panel and styling element that changed in the 2018 update. From the revised front bumper and new-generation headlights through to the restyled rear end, updated fenders, bonnet vents, side vents and grille — this is a complete exterior transformation, not a partial refresh. Every component is precision-moulded in high-quality bare plastic, ready to be painted to your exact factory colour code or a bespoke finish of your choosing. Whether you're looking to modernise a high-mileage example before a sale, unify the appearance of a recently acquired pre-facelift vehicle, or simply want the cleaner, more aggressive look of the post-2018 specification, this kit delivers a thorough, cohesive result. Fitted correctly by a professional bodyshop, the transformation is indistinguishable from a factory facelift car. What's Included 💡 Front Lights (Pair) 2018-style headlight units, left & right 🔴 Rear Lights (Pair) 2018-style tail light units, left & right 🚗 Front Bumper 2018 facelift style, bare plastic 🔧 Rear Bumper 2018 facelift style, bare plastic 🪟 Front Fenders / Wings (Pair) Left & right, 2018 profile ◼️ 2018 Black Sport Grille Gloss black, facelift spec 🔲 Black Side Vents (Pair) 2018-style side vent inserts 🏁 Hood / Bonnet Vents 2018 bonnet vent set, bare plastic Product Highlights Complete front-to-rear facelift conversion for the L405 platform Updates 2013–2017 models to the refined 2018–2021 exterior specification Supplied in bare plastic — ready for any factory or custom paint code Precision-moulded for direct fitment to pre-facelift L405 mounting points Includes updated 2018-style front and rear lighting units New-generation sport grille in gloss black for a sharper front face Revised bonnet vents and side vents match factory facelift detailing Significantly enhances kerb appeal and potential resale value All eight conversion components included in a single kit Designed for professional bodyshop installation for a seamless OEM result Compatibility Vehicle Model Code Year Range Compatibility Range Rover Vogue L405 2013–2017 (Pre-Facelift) Direct Fit Range Rover Vogue L405 2018–2021 (Facelift) Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Installation Guide — SVO Facelift Body Kit · L405 Vogue Begin by removing the existing pre-facelift front bumper, grille, headlights, bonnet vents, and front fenders carefully to avoid damaging surrounding panels or wiring looms. Remove the existing rear bumper and tail light units, noting all wiring connector positions for re-connection during reassembly. Have all bare plastic components professionally prepared, primed, and painted to your chosen factory colour or custom finish before installation begins. Fit the new 2018-style front fenders first, aligning to OEM mounting points and verifying panel gaps are consistent before torquing fasteners. Install the new bonnet vents and side vent inserts, ensuring flush fitment with surrounding body panels. Fit the 2018 front bumper assembly, followed by the new sport grille, checking alignment across the full width of the vehicle. Connect and install the new front headlight units, verifying electrical connections and beam alignment post-installation. Install the 2018 rear bumper and connect the new tail light units, testing all lighting functions before completing the installation. ⚠ Professional Installation Strongly Recommended. This kit involves the removal and replacement of multiple structural and electrical body components. Incorrect fitment can affect panel gaps, paint integrity, and lighting alignment. We strongly recommend installation by an experienced bodyshop or Land Rover specialist. Components are supplied unpainted — painting prior to fitting is essential. The L405 Deserves the Facelift Look Browse the full range of Range Rover Vogue L405 upgrades at Victorious Automotive — the UK's most trusted specialist in Range Rover, Land Rover, and Defender accessories, with over 12,300 verified five-star reviews. Shop All L405 Vogue Upgrades → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or representing Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for identification and compatibility purposes only. All rights remain with their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Body Conversion Range Rover Sport SVR Body Conversion Kit — 2013–2018 Facelift Upgrade (L494) Give your pre-facelift Range Rover Sport L494 a complete 2018 SVR-inspired exterior transformation — from the front bumper to the rear lights — in bare plastic ready for your choice of finish. L494 2013–2018 SVR Style Bare Plastic Facelift Conversion Full Body Kit Front & Rear Fenders Included Sport Exterior Overview The Range Rover Sport L494 arrived in 2013 as one of the most dynamic and desirable SUVs on the road — refined, purposeful, and unmistakably Sport. When Land Rover refreshed the model in 2018 with an updated front and rear aesthetic, sharper lighting signatures, and revised body detailing, the visual gap between earlier and later examples became immediately apparent. For owners of 2013–2017 models, that gap no longer needs to exist. This SVR-style body conversion kit is engineered specifically for the pre-facelift Range Rover Sport L494, delivering a comprehensive update to every major exterior panel that defines the 2018 appearance. From the restyled SVR-influenced front bumper and updated grille to the revised rear bumper and 2018-spec lighting front and rear, this kit replaces the original old-style components with modern, cohesive alternatives that genuinely transform how the vehicle reads on the road. Supplied in bare plastic throughout, each component arrives ready for professional preparation, priming, and painting to your exact specification — whether you're matching an existing factory colour or creating something entirely bespoke. This is a high-commitment, high-reward upgrade for Sport owners who want their vehicle to look exactly as current as it feels to drive. What's Included 🔆 Front Lights — 2018 Style Updated LED-style units matching 2018 facelift signature 🔴 Rear Lights — 2018 Style Revised rear light cluster design for a cohesive facelift look 🚘 Front Bumper — 2018 Style SVR-influenced lower section and air intake styling 🔁 Rear Bumper — 2018 Style Updated rear diffuser-style bumper for a Sport facelift finish 🛡️ Front Fenders / Wings (L & R) Left and right updated fender panels for seamless panel fit ⬛ Black Grille — 2018 Style Dark finish SVR-inspired front grille surround 💨 Side Vents — 2018 Style Updated side vent inserts for both sides of the vehicle 🔩 Hood / Bonnet Vents — 2018 Style Revised bonnet vent inserts for the complete facelift look Product Highlights Complete exterior transformation from 2013–2017 spec to 2018 facelift appearance SVR-inspired styling throughout — front bumper, grille, vents, and rear Supplied in bare plastic — ready for professional painting to any colour Includes both front and rear bumpers for a fully cohesive conversion Front and rear 2018-style lights included — no need for separate purchases Left and right fenders/wings included for a seamless panel line continuation 2018 black grille surround adds depth and a modern, aggressive character Side vents and bonnet vents complete the full-body visual refresh Designed for models equipped with old-style (pre-facelift) headlights Engineered to L494 specification for accurate panel fitment and alignment Compatibility Vehicle Model Code Year Range Headlight Type Fitment Range Rover Sport L494 2013–2017 Old-style (pre-facelift) Direct Fit Range Rover Sport L494 2018 Facelift headlights Not Required Range Rover Sport L461 2022–2026 New generation Not Compatible Range Rover Vogue L405 2013–2020 Various Not Compatible Defender L663 2020–2026 N/A Not Compatible Installation Notes Difficulty: Advanced  ·  Estimated Time: 1–2 Full Days (Professional) Before fitment, dry-fit all components against the vehicle to confirm panel alignment and identify any preparation requirements. Have all bare plastic components professionally prepared, primed, and painted to your specification prior to installation — this will prevent colour mismatch after fitting. Disconnect the vehicle battery before removing or connecting any lighting components (front and rear lights). Remove the original front bumper, grille, side vents, bonnet vents, and front fenders carefully — retain all original hardware and mounting clips where possible. Remove the original rear bumper and rear light clusters, ensuring all wiring looms are safely disconnected and protected. Install the 2018-style front bumper, grille insert, fenders, and bonnet vents — align to factory mounting points and torque all fixings to manufacturer specification. Install the 2018-style rear bumper and connect the updated rear light clusters, ensuring secure wiring connections throughout. Fit the side vents to both sides and perform a full panel gap inspection before reconnecting the battery and verifying all lighting functions. ⚠ Important: This is a complex multi-panel body conversion. Professional installation by a qualified bodywork specialist is strongly recommended. Incorrect fitment may affect panel alignment, water ingress sealing, and lighting compliance. Always confirm legal road compliance requirements for lighting in your region before use. The Sport, Exactly As It Should Look The Range Rover Sport L494 deserves to wear the sharpest version of itself. This conversion kit is how you get there — every panel, every light, every vent replaced with the 2018 facelift design you've been looking at. Browse the full Range Rover Sport L494 collection for further exterior and interior upgrades. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always consult a qualified professional before undertaking bodywork modifications and verify road legality requirements in your jurisdiction.

Victorious Automotive · Defender L663 · Exterior Styling LED Hood Bonnet Deflector & Protector for Land Rover Defender L663 (2020–2026) A three-piece bonnet deflector engineered specifically for the Defender L663, combining active LED lighting modes with genuine road debris protection for an elevated exterior presence. Defender L663 2020–2026 Direct Fit Integrated LED 4 LED Modes Bonnet Protection 3-Piece Kit Exterior Accessory Overview The Land Rover Defender L663 occupies a unique position in the modern SUV landscape — it is simultaneously a precision-engineered on-road performer and a genuinely capable off-road tool. Owners who choose to personalise their Defender expect accessories that respect that duality: purposeful in function, considered in design, and built to last beyond the showroom floor. This LED Hood Bonnet Deflector Protector has been developed exclusively for the L663 platform. The three-piece assembly — two flanking side protectors and a central LED-integrated middle section — sits along the leading edge of the bonnet, shielding it from stone chips, road grit, and debris that accumulate at speed. The integrated LED strip elevates the visual identity of the Defender at night, with four selectable lighting effects that respond to vehicle events including startup, indicator activation, and hazard signalling. Rather than a generic universal-fit deflector, this kit uses mounting points tailored to the L663 body line, ensuring a flush, factory-cohesive appearance. The result is an accessory that looks as though it belongs — because it was designed to. What's Included 🔲 Left Side Protector Flanking deflector panel — driver's side 🔲 Right Side Protector Flanking deflector panel — passenger's side 💡 Centre LED Protector Middle section with integrated LED strip and wiring 🔌 LED Wiring & Cables Pre-routed cable set for LED connection 🔩 Mounting Hardware Vehicle-specific fixings and clips included Product Highlights Precision-engineered direct fit for Defender L663 (2020–2026) Integrated LED strip housed within the centre protector piece Four configurable LED modes for dynamic exterior lighting Indicator effect — LED follows turn signal activation Start-up/unlock effect — lights animate on ignition or remote unlock Hazard/double flash effect — syncs with vehicle hazard lights Static ambient mode for constant low-level illumination Protects bonnet leading edge from stone chips and debris Factory-cohesive aesthetic — no visible bolts or exposed brackets Three-piece modular design for precise fitment and easy installation Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Installation Recommended Ensure the vehicle is parked, switched off, and the bonnet is cool before beginning. Clean the bonnet leading edge thoroughly with an isopropyl alcohol wipe to remove wax, oil, or debris from mounting surfaces. Dry-fit all three protector pieces along the bonnet edge to confirm alignment and verify that the mounting points correspond correctly before any adhesive or fasteners are applied. Begin with the two side protector pieces. Align each one to the outer bonnet edge and secure using the supplied mounting hardware, ensuring clips seat fully without flex. Position the centre LED protector section and carefully route the LED wiring through the bonnet gap or firewall conduit to reach the vehicle's fuse/indicator circuit. Do not trap or kink the cable during routing. Connect the LED wiring to the appropriate vehicle circuits following the supplied wiring diagram. Test all four LED modes prior to finalising the cable routing and securing any excess cable with supplied ties. Once all three sections are secured and lighting is confirmed functional, press each piece firmly along its full length to ensure adhesive contact is complete. Allow a minimum of 2 hours before driving. ⚠ Important: Incorrect wiring can affect vehicle electronics or LED warranty. If you are not confident routing and connecting to vehicle circuits, we strongly recommend professional installation by a qualified auto electrician or Land Rover specialist. Retain all original packaging and hardware until installation is confirmed complete and functioning. Built for Defender Owners Who Expect More Every accessory at Victorious Automotive is selected with the same standard you hold your Defender to. Explore the full Defender L663 exterior collection and find everything you need to complete your build. Shop Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of compatibility identification.

Victorious Automotive · Defender L663 · Exterior Trim Carbon Fiber Front Windshield Pillar Trim for Land Rover Defender L663 110 & 90 (2020–2023) A precision-matched carbon fibre pillar overlay that elevates the Defender's front A-pillar with a purposeful, contemporary edge — no modifications, no mess. Defender L663 2020–2023 110 & 90 Carbon Fibre ABS Peel & Stick Exterior Trim Direct Fit Black Finish Overview The Land Rover Defender L663 arrived as a complete reimagining of an icon — blending genuine off-road credibility with a bold, modern design language that demands attention both on tarmac and on the trail. Every surface of the Defender has been considered, and the front windshield pillars are no exception. For owners who want their Defender to reflect that same attention to detail, the right exterior trim upgrade makes all the difference. This Carbon Fiber Front Windshield Pillar Trim is purpose-designed for the 2020–2023 Defender L663, available in both 110 and 90 body configurations. Crafted from high-quality ABS plastic with a convincing carbon fibre weave finish, each piece is contoured to sit flush against the original pillar profile — delivering the visual drama of real carbon fibre without the cost or complexity. The result is a cleaner, more aggressive roofline transition that suits everything from a standard Defender to a lifted, accessorised build. Installation requires no drilling, no specialist tools, and no trips to a bodyshop. The included double-sided automotive adhesive backing bonds firmly to the factory surface, making this one of the most impactful and accessible exterior upgrades available for the L663. Clean the surface, peel, align, press — your Defender's exterior changes permanently for the better. What's Included 🪟 Pillar Trim Panels × 2 Left & right carbon fibre ABS overlays, pre-cut to Defender L663 profile 🔲 Pre-Applied Adhesive Tape Double-sided automotive-grade adhesive pre-installed on reverse of each panel 📋 Installation Guide Step-by-step fitment instructions included in packaging Product Highlights Precision-cut to match the exact contour of the Defender L663 front windshield pillars High-quality ABS plastic construction — durable, lightweight, and weather-resistant Realistic carbon fibre weave finish with a sophisticated gloss black appearance Pre-applied double-sided automotive adhesive for a clean, fuss-free installation Compatible with both Defender 110 and Defender 90 body styles (2020–2023) No drilling, cutting, or professional fitting required — fully DIY-friendly Resistant to UV fading, road vibration, and temperature fluctuation Pairs seamlessly with other carbon fibre trim upgrades across the L663 exterior Supplied as a matched pair — driver and passenger side included as standard Reversible upgrade — remove cleanly with no damage to factory paint or surfaces Compatibility Model Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2023 5-Door Direct Fit Land Rover Defender 90 L663 2020–2023 3-Door Direct Fit Land Rover Defender 130 L663 2022–2023 6-Door Verify Before Order Range Rover Sport L494 L494 2013–2022 5-Door Not Compatible Range Rover Vogue L405 L405 2013–2021 5-Door Not Compatible Range Rover Velar L560 2018–2022 5-Door Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Tools Required: None Park the Defender on a level surface and allow the exterior panels to reach ambient temperature — avoid installation in direct sunlight or cold conditions below 10°C. Thoroughly clean both front windshield pillar surfaces using an isopropyl alcohol (IPA) wipe or panel preparation solution. Remove all wax, grease, dust, and moisture completely. Allow the cleaned surface to dry fully for at least 5 minutes before proceeding. Dry-fit each trim panel against the corresponding pillar — left side first — to confirm alignment and positioning before committing to adhesion. Peel back a small section of the adhesive backing tape, align the top edge of the panel with the pillar, and press firmly into position from top to bottom, smoothing out as you go. Apply firm, even pressure across the entire panel surface for 30–60 seconds to activate the adhesive bond. Repeat on the opposite side. Allow the adhesive to cure undisturbed for a minimum of 24 hours before washing the vehicle or exposing the trim to heavy rain. ⚠ Important: Do not attempt to reposition the panels once the adhesive has made full contact with the surface. Ensure the application area is completely clean and dry — any contamination will significantly reduce bond strength and long-term durability. Complete the Look of Your Defender This pillar trim is just the beginning. Explore the full Victorious range of carbon fibre and exterior upgrades for the Defender L663 — designed to work together for a cohesive, premium finish. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.