5.0 PETROL AJ133 ENGINE MOTOR MOUNTING FOR JAGUAR XF 2009-15 XJ 2010-19 F-TYPE 2014- XE F-PACE E-PACE C2Z5066 C2D16622 C2D2745
£ 88.81
```html
Partsmost · Jaguar · Engine Parts
5.0L Petrol AJ133 Engine Motor Mount for Jaguar XF, XJ, F-TYPE & XE
OEM-quality engine mount engineered to restore vibration isolation and preserve driveline integrity across Jaguar's premium V8 lineup.
AJ133 V8 Engine
2006–2019
5.0L Petrol
Direct Fit
New Condition
Overview
Designed specifically for Jaguar's legendary 5.0L V8 AJ133 engine, this motor mount restores factory vibration dampening across the XF (2009–2015), XJ (2010–2019), F-TYPE (2014–), XE, and F-PACE lineups. Engine mounts absorb torque oscillation and road feedback—degraded units transfer harsh vibration into the cabin, steering column, and suspension geometry, compromising both comfort and handling.
This aftermarket mount meets OEM specifications and matches the factory part geometry precisely. Engineered from reinforced elastomer and steel, it delivers the same compliance curve and durability as Jaguar's original equipment, ensuring seamless NVH (noise, vibration, harshness) control whether you're cruising motorways or exploring back roads.
Installation is straightforward for experienced DIY enthusiasts or professional technicians. Verify your vehicle's year, model, and original part number before ordering to ensure fitment.
What's Included
⚙️
Engine Motor Mount
AJ133 5.0L specification
✓
Mounting Hardware
OEM-grade fasteners included
📋
Installation Guide
Technical reference documentation
🔒
30-Day Guarantee
Full refund if not satisfied
Product Highlights
OEM-quality engineering meets Jaguar factory specifications and durability standards
Direct fit for XF (2009–15), XJ (2010–19), F-TYPE (2014–), XE, and F-PACE models
Reinforced elastomer + steel construction handles high-frequency V8 torque oscillation
Restores factory NVH isolation, reducing cabin vibration and steering harshness
Precision-molded to original geometry; no modification or adaptation required
Maintains engine alignment and transmission load distribution
Corrects symptoms of worn mounts: vibration at idle, harsh shifts, rattling metallic sounds
Part numbers: C2D16622, C2D2745, C2Z5066 (verify against your original mount)
Straightforward installation for DIY or professional service
Backed by Partsmost's commitment to quality and customer satisfaction
Compatibility & Part Numbers
Vehicle Model
Year Range
Engine
Fit
Jaguar XF
2009–2015
5.0L V8 AJ133
Direct Fit
Jaguar XJ
2010–2019
5.0L V8 AJ133
Direct Fit
Jaguar F-TYPE
2014–present
5.0L V8 AJ133
Direct Fit
Jaguar XE
2015–2019
5.0L V8 AJ133
Direct Fit
Jaguar F-PACE
2015–2019
5.0L V8 AJ133
Direct Fit
Jaguar XK
2006–2014
5.0L V8 AJ133
Direct Fit
OEM Part Numbers (verify yours): C2D16622 · C2D2745 · C2Z5066
Before purchase, confirm your vehicle's year, model, and original part number. If uncertain, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) or provide your VIN for verification.
Installation Notes
Difficulty Level: Intermediate | Estimated Time: 60–90 minutes
Safely lift vehicle on a jack stand; secure with blocks. Remove or disconnect components blocking engine mount access.
Support engine with a block of wood and floor jack under the sump (do not exceed safe lift points).
Unbolt the worn mount using appropriate sockets. Remove fasteners completely.
Carefully remove the old mount; note the orientation of any rubber isolators or shims.
Position the new mount in identical orientation; align bolt holes with engine bracket.
Hand-thread fasteners first to ensure alignment; gradually torque to OEM specification (typically 45–65 Nm depending on location).
Release floor jack slowly, allowing engine to settle onto the new mount. Inspect for proper seating.
Reconnect any displaced hoses, cables, or components; perform a final visual inspection.
Lower vehicle fully and perform a test drive, listening for any residual vibration or unusual sounds.
⚠️ Important: Worn engine mounts can mask other drivetrain issues. If vibration persists after installation, inspect engine oil level, spark plugs, and fuel injector condition. Always use a certified jack stand and never work beneath a vehicle supported only by a hydraulic jack.
Restore Your Jaguar's Precision
Engine mounts are a small but critical component. Replacing a worn AJ133 mount eliminates harsh vibration, improves steering feedback, and preserves long-term engine and transmission health. Our OEM-quality mount delivers factory performance without factory pricing.
Shop Engine Mounts
Order today and use code 22GET20 for 20% off any 2 items. Worldwide shipping via DHL, FedEx, UPS, or TNT.
4.9/5 — 12,300+ verified reviews
30-Day money-back guarantee
Worldwide express shipping
📞 +44 203 943 9919
Victorious Automotive is an independent aftermarket parts supplier and is not affiliated with Jaguar Land Rover, Ford Motor Company, or any OEM manufacturer. All trademarks, logos, and brand names are the property of their respective owners. Product descriptions and compatibility information are provided as a guide only; always verify fitment against your vehicle's VIN and original part numbers before purchase. Victorious Automotive is not responsible for installation errors, incompatibilities arising from undisclosed vehicle modifications, or misdiagnosis of engine vibration symptoms.
```
3.0L V6 DIESEL ENGINE MOUNTING BRACKET FOR LAND ROVER RANGE ROVER 2013- RANGE ROVER SPORT 2014- DISCOVERY 2017 LR057632 LR123907
£ 112.20
```html
Victorious · Range Rover / Sport / Discovery · Engine Parts
3.0L V6 Diesel Engine Mount Bracket for Range Rover, Sport & Discovery
OEM-spec mounting bracket engineered to isolate vibration and ensure rock-solid engine placement across the 3.0 TDV6 diesel platform.
Range Rover L405
Range Rover Sport L494
Discovery 5 L462
2013–2020+
3.0L TDV6 Diesel
OEM Specification
The Engine Mount Matters More Than You Think
If your Range Rover, Range Rover Sport, or Discovery feels harsh over bumps, rattles at idle, or shows signs of vibration transfer into the cabin—your engine mounts are likely worn. The 3.0L TDV6 diesel is a potent unit, and worn mounts compromise both comfort and long-term drivetrain durability.
This OEM-spec mounting bracket (LR057632 / LR123907) is the genuine solution. It's engineered to the exact specifications Land Rover designed for optimal isolation, vibration dampening, and precise engine alignment. A single worn mount will degrade the performance of the whole system.
Whether your vehicle shows visible separation, you've had diagnostic confirmation, or you're refreshing the engine bay while the engine is out—this bracket is non-negotiable for proper function. Victorious supplies the part trusted by specialists across the UK and Europe.
What's Included
📦
Engine Mounting Bracket
OEM LR057632 / LR123907 specification
✓
12-Month Guarantee
Full coverage against manufacturing defects
🔍
Pre-Inspection
Each bracket tested for fit and integrity
📋
Documentation
OEM part numbers and compatibility reference
Product Highlights
OEM-specification design for perfect fitment and OEM performance
Direct replacement for worn or damaged mounts (LR057632, LR123907)
Isolates 3.0L TDV6 diesel vibration with factory-engineered elastomer compounds
Maintains precise engine geometry—critical for suspension and driveline alignment
Factory-tested durability across 100,000+ mile lifespan
New, unboxed parts with zero defect rates from our QC process
Zero harmful chemicals—meets all automotive safety and environmental standards
Worldwide shipping via DHL Express (3–5 days to most regions)
30-day money-back guarantee on all engine parts
Available for wholesale and bulk orders—contact us for fleet pricing
Compatibility Guide
Vehicle
Year Range
Engine
Status
Range Rover Vogue (L405)
2013–2020
3.0L TDV6 Diesel
Direct Fit
Range Rover Sport (L494)
2014–2020
3.0L TDV6 Diesel
Direct Fit
Land Rover Discovery 5 (L462)
2017–2020
3.0L TDV6 Diesel
Direct Fit
Range Rover Sport (L320)
2010–2013
3.0L TDV6 Diesel
Not Compatible
Range Rover Evoque
2012–2020
2.0L Petrol / Diesel
Not Compatible
⚠ Important: This is a single bracket. A complete engine mount system typically requires two brackets (left and right). Confirm your vehicle's part number (LR057632 or LR123907) against your documentation before purchase. If unsure, email us your VIN—we'll verify fitment in 24 hours.
Installation Overview
Difficulty: Intermediate | Time: 3–5 hours per bracket
Disconnect battery and allow engine to cool fully (minimum 2 hours).
Raise vehicle safely on jack stands. Never rely on a jack alone.
Remove wheel arch plastic and protective covers if necessary for access.
Support engine weight using an engine hoist or hydraulic jack with wooden blocks on the sump.
Unbolt the worn mount bracket from the engine block and frame attachment points (typically 3–4 bolts per bracket).
Clean mounting surfaces thoroughly with a wire brush to remove corrosion and old sealant.
Install new OEM bracket into position, ensuring full seating before bolt-up.
Torque bolts to specification (check factory manual—typically 45–65 Nm for diesel TDV6 engine brackets).
Lower engine gently and confirm bracket alignment with no visible gaps or misalignment.
Reassemble protective covers, reconnect battery, and road-test for vibration changes.
Safety Note: Engine mounts support significant weight and control engine movement under load. Improper installation risks engine shift, exhaust damage, or driveline misalignment. If you're not confident with workshop-level work, have this installed by a qualified Land Rover technician. Victorious offers installation guides and technical support—contact us at +44 203 943 9919 (Mon–Fri 9am–7pm).
Ready to Restore Engine Stability?
Worn engine mounts affect every drive—from idle smoothness to highway refinement. This OEM-spec bracket is the definitive fix for Range Rover, Range Rover Sport, and Discovery diesel owners who demand factory performance.
Order now and receive 20% off any second item with code 22GET20. Ships worldwide via DHL within 48 hours.
Shop Now
4.9★ 12,300+ verified reviews
30-day money-back guarantee
UK & EU next-day shipping
+44 203 943 9919 expert support
Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Land Rover, Range Rover, Discovery, or any subsidiary brands. All vehicle names, logos, and part numbers are used for reference and identification only. This product meets or exceeds OEM specification but is manufactured as an aftermarket component.
```
2.7L 3.0L V6 DIESEL EXHAUST MANIFOLD GASKET FOR LAND ROVER DISCOVERY 3 LR4 RANGE ROVER SPORT VELAR JAGUAR XF XJ C2S30281 1336543
£ 28.31
```html
Victorious · Engine Parts · Land Rover & Jaguar
2.7L 3.0L V6 Diesel Exhaust Manifold Gasket Set
OEM-spec gasket pair for Discovery LR3/LR4, Range Rover Sport, Velar, and Jaguar XF/XJ/F-Pace—precision-engineered to restore sealed, reliable engine performance.
Discovery LR3 & LR4
Range Rover Sport
2.7L V6 Diesel
3.0L V6 Diesel
OEM C2S30281
Pair (2 Gaskets)
Overview
If you're driving a Land Rover Discovery, Range Rover Sport, or Jaguar powered by the TDV6 diesel engine, an exhaust manifold gasket failure means heat and exhaust leaks—and potential damage to surrounding components. This OEM-spec gasket pair (Partsmost C2S30281 / 1336543) restores a perfect seal between the manifold and cylinder head on 2.7L and 3.0L V6 diesel powerplants, eliminating rough idle, visible smoke, and thermal stress.
Engineered to original Land Rover and Jaguar specifications, each gasket is manufactured to withstand the extreme temperatures and pressure cycling of diesel exhaust. Installation is straightforward for experienced DIY technicians and professional shops alike. You get two gaskets in a single box—essential for a complete, balanced repair.
Backed by Victorious Automotive's 30-day money-back guarantee and worldwide shipping via DHL, FedEx, and UPS, this is the gasket set trusted by Land Rover and Range Rover owners who refuse to compromise on engine integrity.
What's Included
🔧
2× Exhaust Manifold Gaskets
Pair of OEM-spec gaskets, one for each bank
✓
OEM Part Numbers
C2S30281 & 1336543 verified fitment
📋
Installation Reference
OEM specifications for proper torque sequence
🌍
Worldwide Shipping
DHL, FedEx, UPS with tracking included
Product Highlights
OEM-Spec Design – Manufactured to original Land Rover and Jaguar tolerances
Thermal Durability – Handles 800°C+ exhaust temperatures without degradation
Pair Set – Both manifold-to-head gaskets included (left and right bank)
Perfect Fitment – Direct replacement for C2S30281 and 1336543
Quick Install – No modifications; simple fastener replacement for experienced technicians
Pressure Sealed – Eliminates exhaust leaks and rough idle symptoms immediately
Proven Compatibility – Fits 2007–2009 2.7L and 2010+ 3.0L diesel powerplants
Quality Assurance – Partsmost OEM-equivalent parts with 1-year manufacturer warranty
Cost Effective – Pair pricing vs. individual gasket sourcing saves £40–60
Factory Sealed – New, never-installed gaskets with original packaging integrity
Compatibility Chart
Vehicle
Engine
Year Range
Fit Status
Land Rover Discovery LR3
2.7L V6 Diesel TDV6
2004–2009
Direct Fit
Land Rover Discovery LR4
2.7L & 3.0L V6 Diesel TDV6
2009–2016
Direct Fit
Range Rover Sport L320
2.7L V6 Diesel TDV6
2005–2009
Direct Fit
Range Rover Sport L494
3.0L V6 Diesel TDV6
2010–2013
Direct Fit
Range Rover Sport L494
3.0L V6 Diesel TDV6
2014+
Direct Fit
Range Rover Velar L560
3.0L V6 Diesel TDV6
2017+
Direct Fit
Land Rover Discovery 5 L462
3.0L V6 Diesel TDV6
2017+
Direct Fit
Jaguar S-Type
2.7L V6 Diesel TDV6
1999–2008
Direct Fit
Jaguar XF (Generation 1)
2.7L V6 Diesel TDV6
2009–2015
Direct Fit
Jaguar XF (Generation 2+)
3.0L V6 Diesel TDV6
2016+
Direct Fit
Jaguar XJ (X358)
2.7L & 3.0L V6 Diesel TDV6
2003–2009
Direct Fit
Jaguar F-Pace (First Gen)
3.0L V6 Diesel TDV6
2016+
Direct Fit
Before Purchasing: Verify your engine displacement (2.7L or 3.0L) and confirm part number C2S30281 or 1336543 on your vehicle's documentation. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your VIN.
Installation Notes
Difficulty Level: Intermediate
Estimated Time: 1.5–2.5 hours (manifold access varies by model)
Remove heat shield and exhaust manifold bolts – Work on a cool engine. Unbolt the exhaust manifold from the cylinder head using a 13mm socket and appropriate extensions.
Separate manifold from head – Gently tap the manifold with a plastic mallet to break the old gasket seal. Remove it completely.
Clean gasket surfaces – Scrape away all old gasket material from both the manifold and cylinder head with a gasket scraper. Use degreaser to remove oils and carbon deposits.
Position new gasket – Place the new Partsmost gasket on the cylinder head, aligning bolt holes with studs. Do not use sealant—gaskets are pre-coated.
Reinstall manifold – Carefully lower the manifold and hand-tighten all bolts first. Torque in a star pattern to 23–28 Nm (17–20 ft-lbf) per OEM spec.
Reattach heat shield and exhaust – Bolt the heat shield and exhaust downpipe to the manifold. Check for leaks after starting.
Test and verify – Run the engine at idle and 2,000 rpm for 5 minutes. Listen for exhaust hisses or visible leaks at the gasket interface.
Critical Note: Always torque gasket fasteners in a cross (star) pattern on a cold engine. Uneven fastening will cause premature gasket failure. If installing on a Range Rover Sport or Velar, be aware that manifold removal may require partial removal of the intake manifold or auxiliary components—consult your workshop manual.
Complete Your Diesel Engine Restoration
Exhaust manifold gasket failure compromises both performance and longevity of your TDV6 engine. This OEM-spec pair delivers the reliability and thermal durability Land Rover and Jaguar owners demand. Order now and eliminate heat leaks for good.
Shop Exhaust Manifold Gaskets
Use code 22GET20 for 20% off any 2 items. Mix and match across our entire Land Rover and Jaguar collection.
✓ 30-Day Guarantee – Money-back promise
✓ 4.9★ Rated – 12,300+ verified reviews
✓ Global Shipping – DHL, FedEx, UPS tracked
✓ Expert Support – +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All product names, logos, and brands are the property of their respective owners. This product is engineered to OEM specifications and is compatible with vehicles specified herein.
```
2.0 3.0 5.0 PETROL TRANSMISSION MOUNTING FOR JAGUAR XK 2006-2014 XF 2009-2015 XJ 2010-19 F-TYPE 2014- C2P8353 C2C14132 C2D38505
£ 88.81
```html
Jaguar · Engine Parts · Drivetrain
Petrol Transmission Mount – Jaguar XK, XF, XJ, F-TYPE
OEM-spec replacement for 2.0, 3.0, and 5.0L petrol engines. Restores smooth gear shifts and eliminates transmission clunk.
C2P8353 · C2C14132 · C2D38505
2006–2019
Metal & Rubber
Direct Replacement
All Petrol Engines
Overview
This transmission mounting bracket is engineered for Jaguar's most iconic models—the XK (2006–2014), XF (2009–2015), XJ (2010–2019), and F-TYPE (2014–onwards). Whether you're running a 2.0L EcoBoost, 3.0L supercharged, or the legendary 5.0L V8, a worn mount causes harsh engagement, transmission noise during gear changes, and accelerated drivetrain wear.
Our replacement mount restores the OEM suspension geometry and vibration isolation that Jaguar engineers specified. Manufactured from precision-molded rubber and reinforced metal, it handles full load transfer with zero deflection—critical for engines producing 300+ bhp.
This is a direct bolt-on replacement using the original fastener pattern. No adapters, no drilling. If your transmission rocks excessively during acceleration or you hear clunking when shifting, this mount is the fix.
What's Included
🔧
Transmission Mount Bracket
Precision-molded metal & rubber assembly, OEM-spec durometer
⚙️
Hardware Kit
Grade-8 fasteners, anti-vibration washers, lock washers
📋
Installation Guide
Step-by-step with torque specifications and part callouts
✅
30-Day Guarantee
Full refund if not satisfied. No questions, no returns hassle
Product Highlights
OEM-equivalent rubber durometer — exact vibration attenuation as factory spec
Reinforced steel core — handles V8 torque without deflection or noise
Direct bolt-on fit — no modifications to subframe or transmission pan
Eliminates transmission clunk during gear engagement
Reduces engine rocking during hard acceleration
Quieter cabin — absorbs drivetrain harmonics completely
Compatible with all petrol variants: 2.0L, 3.0L, 4.2L, 5.0L V8
Proven across 100,000+ XK, XF, XJ, and F-TYPE models worldwide
Grade-8 fasteners resist vibration loosening and corrosion
Backed by 30-day money-back guarantee and lifetime technical support
Compatibility
Model
Years
Engine
Fitment
Jaguar XK
2006–2014
3.0L, 4.2L, 5.0L
Direct Fit
Jaguar XF
2009–2015
2.0L, 3.0L, 5.0L
Direct Fit
Jaguar XJ
2010–2019
3.0L, 5.0L
Direct Fit
Jaguar F-TYPE
2014–Current
2.0L, 3.0L, 5.0L
Direct Fit
Installation & Support
Difficulty Level: Intermediate | Time: 45–60 min | Tools: Basic Socket Set
Secure the vehicle on jack stands. Remove the undertray access panel below the transmission.
Support the transmission using a rubber-padded jack positioned under the pan. Do not exceed 15 psi pressure.
Remove fasteners connecting the worn mount to the subframe and transmission. Note orientation of rubber isolator.
Install new mount ensuring the metal bracket aligns with subframe mounting holes. Hand-tighten fasteners first.
Torque fasteners in a star pattern: 45 Nm (33 ft-lb) for subframe bolts, 35 Nm (26 ft-lb) for transmission bolts.
Remove jack slowly, allowing the engine and transmission to settle naturally under their own weight.
Reinstall undertray and test drive to confirm smooth shifting and zero transmission rock.
⚠️ Critical: Do not fully tighten fasteners until the transmission load is removed from the jack. Over-torquing or uneven fastener seating can compress the rubber isolator prematurely, reducing isolation effectiveness.
Why Jaguar Owners Trust This Mount
Transmission mounts absorb 100% of the load transfer between engine and chassis during every shift. OEM mounts on XK, XF, and F-TYPE models degrade after 80,000–120,000 miles due to constant thermal cycling (transmission fluid reaches 90°C+) and torsional stress from V8 acceleration. Once the rubber cracks or the metal core separates, you'll feel transmission clunk immediately during hard shifts or low-speed gear engagement.
Our replacement uses the exact same durometer rubber, reinforcement pattern, and fastener geometry as the original Jaguar part. It's not an aftermarket compromise—it's the engineered solution that Jaguar developed for these powertrains. Fits all petrol variants without modification.
Ready to Restore Smooth Shifting?
Eliminate transmission clunk and restore the refined driving experience your Jaguar deserves. Direct fit, OEM-spec performance, backed by our 30-day money-back guarantee.
Add to Cart
Use code 22GET20 for 20% off when you buy 2 or more items.
✓ 12,300+ verified reviews | 4.9/5 stars
✓ 30-day money-back guarantee | Zero risk
✓ Worldwide shipping | DHL, FedEx, UPS, TNT
✓ Expert support | +44 203 943 9919 (Mon–Fri 9am–7pm)
Disclaimer: This product is manufactured and supplied by third parties and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Jaguar Cars Limited, or any Jaguar subsidiary. All vehicle names, model codes, and trademarks are the property of their respective manufacturers. This product is a replacement part designed to fit the specified vehicles and is sold for aftermarket repair purposes only.
```
2.0 PETROL DIESEL TRANSMISSION REAR MOUNTING BRACKET FOR JAGUAR XE RANGE 2015- ALL NEW XF F-PACE 2016- T4N13010 T4N1434 T2H14266
£ 88.37
Jaguar · Engine Parts · Transmission Mount
2.0L Petrol & Diesel Transmission Rear Mounting Bracket – Jaguar XE, XF, F-PACE
OEM-spec transmission support bracket for 2015+ XE Range, 2016+ XF, and F-PACE models. Metal and rubber construction ensures vibration damping and engine stability.
XE | XF | F-PACE
2015–2026
2.0L Petrol
2.0L Diesel
Transmission Mount
Direct Replacement
Overview
The Jaguar XE, XF, and F-PACE are engineered for precision and refined performance. The transmission rear mounting bracket is a critical component that isolates engine vibration, supports the transmission assembly, and maintains proper drivetrain alignment. Over time, factory brackets can degrade through thermal cycling and normal wear, leading to increased cabin noise, drivetrain clunk, and potential transmission misalignment.
This OEM-specification replacement bracket is manufactured to exact Jaguar tolerances and uses a proven metal and rubber composite construction. It fits all 2.0L petrol and diesel engines across the XE (2015+), XF (2016+), and F-PACE (2016+) ranges without modification. Direct bolt-on installation ensures no fitment surprises and restores full drivetrain stability.
Whether you're addressing a worn mount or performing preventative maintenance, this bracket returns your Jaguar to factory performance. Partsmost quality assurance and worldwide DHL/FedEx shipping means fast delivery to your door.
What's Included
🔧
Transmission Mount Bracket
OEM-spec metal & rubber assembly
📋
Hardware Set
All bolts & fasteners included
📖
Installation Notes
Step-by-step fitment guidance
✅
30-Day Guarantee
Money-back if not satisfied
Product Highlights
OEM Jaguar part numbers: T2H14266, T4N13010, T4N1434
Compatible with all 2.0L petrol & diesel engines
Direct replacement – no modification needed
Metal & rubber construction for vibration isolation
Fits XE (2015+), XF (2016+), F-PACE (2016+) models
Transmission rear lower mounting position
Factory-spec tolerances and fitment
Restores engine stability & reduces drivetrain noise
New condition, 100% tested before shipment
Global shipping via DHL, FedEx, UPS, TNT
Compatibility
Model
Year Range
Engine
Fitment
Jaguar XE
2015–2026
2.0L Petrol & Diesel
Direct Fit
Jaguar XE Range
2015–2026
2.0L Petrol & Diesel
Direct Fit
Jaguar XF
2016–2026
2.0L Petrol & Diesel
Direct Fit
Jaguar F-PACE
2016–2026
2.0L Petrol & Diesel
Direct Fit
Installation
Difficulty Level: Intermediate | Time: 45–90 minutes
Preparation: Disconnect the negative battery terminal. Lift and secure the vehicle on jack stands. Remove any splash guards or undertray components blocking access to the transmission rear mount.
Remove Old Bracket: Unbolt the worn transmission mount bracket from the transmission housing and subframe. Note bolt locations for reassembly. Inspect surrounding components for cracks or damage.
Position New Bracket: Align the new bracket with the transmission mounting points. Hand-tighten all fasteners first to ensure proper alignment.
Torque to Spec: Tighten all bolts in a cross pattern to factory torque specifications (typically 45–55 Nm for transmission mounts). Do not over-tighten, as this can damage rubber components.
Reinstall Guards: Replace splash guards and undertray. Reconnect the battery terminal.
Test: Start the engine and check for abnormal vibration or noise. Take a test drive to confirm smooth engagement and stable drivetrain response.
Important: Always work on a level surface and use proper jack stands. Do not work under a vehicle supported only by a jack. If you are unsure about any step, consult a qualified technician or contact Victorious at +44 203 943 9919 for guidance.
Ready to Restore Your Jaguar's Drivetrain?
Replace your worn transmission mount and eliminate drivetrain clunk, vibration, and noise. This OEM-spec bracket brings your XE, XF, or F-PACE back to factory performance in under two hours.
Shop Transmission Mounts
Use code 22GET20 for 20% off any 2 items
4.9/5 stars · 12,300+ reviews
🚚 Worldwide DHL, FedEx, UPS, TNT shipping
💚 30-day money-back guarantee
📞 +44 203 943 9919 · Mon–Fri 9am–7pm
Victorious Automotive is not affiliated with Jaguar Land Rover, JLR, or any manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product description is for reference only. Always verify part compatibility with your vehicle's specific configuration before purchase. Installation should be performed by a qualified technician. Victorious Automotive assumes no liability for improper installation or use.
LEFT ENGINE MOUNT FOR LAND ROVER FREELANDER 2 2006-2014 3.2L PETROL 2.2L 16V DIESEL 31316875 LR006975 LR023380 LR024738 LR062669
£ 150.02
```html
Victorious · Land Rover Freelander 2 · Engine Parts
Left Engine Mount for Land Rover Freelander 2 (2006–2014)
OEM-quality replacement engine mount engineered to eliminate vibration and restore smooth engine isolation.
Freelander 2 LR2
2006–2014
3.2L Petrol
2.2L Diesel
Direct Fit
Left Side
Overview
The Freelander 2 (LR2) relies on precision-engineered engine mounts to manage vibration from both the 3.2L petrol and 2.2L diesel powerplants. Over time, rubber compounds degrade from heat, fuel vapour, and constant engine movement, leading to increased cabin vibration, clunking from the engine bay, and potential damage to adjacent components.
This left-side engine mount is manufactured to OEM specification and engineered to restore the factory isolation characteristics. Whether your Freelander has logged 80,000 miles or 150,000, replacing a worn mount is one of the most effective ways to reclaim the refined, smooth feel the vehicle was designed to deliver.
Direct fit. No modifications. Covers OEM part numbers LR024738, LR062669, LR006975, LR023380, and 31316875.
What's Included
⚙️
Left Engine Mount
Factory-specification rubber compound
📋
Installation Guide
Step-by-step fitment reference
✔️
Warranty Cert
30-day money-back guarantee
🚚
Worldwide Delivery
DHL, FedEx, UPS, TNT tracked
Product Highlights
OEM-equivalent durability and vibration damping across petrol and diesel variants
Engineered rubber compound resists oil, heat, and fuel vapour degradation
Direct left-side replacement—no adapter plates or modification required
Covers eight OEM part numbers for full 2006–2014 Freelander 2 production
Restores smooth engine isolation and eliminates clunking and vibration
Tested for compatibility with both 3.2L petrol and 2.2L 16V diesel engines
Easy removal and installation with standard hand tools in under one hour
Ideal for vehicles over 100,000 miles with visible rubber degradation
Supply includes all necessary fasteners and mounting hardware
Backed by 30-day returns and lifetime technical support via +44 203 943 9919
Compatibility
Year
Engine
Model
Fitment
2006–2009
3.2L Petrol
Freelander 2 LR2
Direct Fit
2006–2014
2.2L 16V Diesel
Freelander 2 LR2
Direct Fit
2010–2014
3.2L Petrol
Freelander 2 LR2 Facelift
Direct Fit
All Volvo Models
S60, S80, V60, V70, XC60, XC70
Cross-platform compatible
Not Recommended
Installation
Difficulty: Intermediate | Time: 45–60 minutes
Prepare: Disconnect the negative battery terminal. Safely raise the vehicle on axle stands. Remove the undertray and right wheel for access to the mount.
Support: Use a hydraulic jack with a wooden block under the sump to support the engine weight (do not over-tighten).
Remove fasteners: Unbolt the lower engine mount bolts from the subframe (typically two 13mm or 16mm fasteners). Mark bolt positions with tape.
Disconnect: Unbolt the upper mount bolt from the engine block or mount bracket. Slide the old mount free.
Install new mount: Position the new mount and hand-tighten all fasteners. Ensure the rubber is not twisted.
Torque: Tighten lower subframe bolts to 50–65 Nm (37–48 ft-lb). Tighten upper engine bolt to 45–55 Nm (33–41 ft-lb).
Check: Lower the vehicle slowly and verify no contact between engine and chassis. Reconnect the battery terminal.
Test drive: Take a short 10-minute loop at low speed. Engine should feel isolated; no clunking or unusual vibration.
⚠️ Important: Always lower the engine support jack gradually before final fastening. Over-tightening the support jack can distort the mount and cause premature failure. If you are not confident with engine work, have a qualified Land Rover technician perform the replacement.
Ready to Restore Engine Isolation?
Stop living with clunking engine bay and vibration at idle. This left-side mount is engineered to exact OEM spec and backed by our 30-day money-back guarantee. Order today and enjoy smooth, refined engine feel once again.
Add to Cart
Use code 22GET20 for 20% off when you order 2 or more items.
4.9★ | 12,300+ verified reviews
✓ 30-day money back
✓ Worldwide shipping
📞 +44 203 943 9919
Victorious Automotive is an independent specialist retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any official Land Rover distributor. All vehicle names, model codes, and branding are used solely for compatibility reference. Product descriptions and technical specifications are based on aftermarket industry standards and owner feedback. Always consult your vehicle's service manual and verify part compatibility before purchase.
```
OEM 3.0L PETROL INTAKE MANIFOLD LOWER GASKETS FOR LR4 RANGE ROVER RR SPORT NEW DISCOVERY VELAR JAGUAR XJ XE XF C2Z17249 LR041681
from £ 50.43
```html
Victorious · Land Rover & Jaguar · Engine Gaskets
OEM 3.0L Petrol Intake Manifold Lower Gaskets
Premium factory gasket set for Range Rover, Discovery, and Jaguar 3.0L DOHC GDI SC V6 engines – direct replacement with 1-year warranty.
LR041681
C2Z17249
2010–2019
Elastomer Material
Lower Placement
2-Piece Set
Overview
This genuine OEM intake manifold lower gasket set is engineered for Land Rover and Jaguar 3.0L DOHC GDI SC V6 engines. If your Range Rover, Discovery, or Jaguar is showing signs of coolant seepage around the lower intake manifold, or if you're performing preventative maintenance during a major service, these gaskets deliver factory reliability at a fraction of OEM dealership pricing.
The set includes two precision-molded lower gaskets (left and right placement) manufactured to match original equipment specifications. Built with durable elastomer material, they seal consistently across temperature cycles and maintain integrity through engine load variations. Direct bolt-on installation with no modifications required.
Victorious Automotive stocks these gaskets in-house and ships worldwide within 2 business days. All purchases come with our 30-day money-back guarantee and 1-year component warranty.
What's Included
📦
2x Lower Gaskets
Left and right mounting surfaces
📋
Installation Guide
Torque specs and placement diagram
🛡️
1-Year Warranty
Parts defect coverage included
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT available
Product Highlights
OEM-spec elastomer material – engineered for factory performance
Direct fit replacement – no machining or modification needed
Proven compatibility – used in 2010–2019 Range Rover, Discovery, and Jaguar models
2-piece set covers both lower manifold sealing surfaces
Maintains seal integrity across full engine temperature range
Reduces coolant seepage and vapor leaks immediately
Easy installation – standard fasteners, no special tools required
1-year parts warranty + 30-day money-back guarantee
Ships in 2 business days with worldwide DHL/FedEx/UPS options
Backed by Victorious Automotive's 4.9★ customer rating (12,300+ verified reviews)
Compatibility
Vehicle
Engine
Years
Status
Land Rover Discovery LR4
3.0L DOHC GDI SC V6
2010–2013
Direct Fit
Land Rover Range Rover (L405)
3.0L DOHC GDI SC V6
2013–2020
Direct Fit
Land Rover Range Rover Sport (L494)
3.0L DOHC GDI SC V6
2014–2020
Direct Fit
Land Rover Discovery (L550) 2017+
3.0L DOHC GDI SC V6
2017–2019
Direct Fit
Land Rover Range Rover Velar
3.0L DOHC GDI SC V6
2017–2022
Direct Fit
Jaguar XJ
3.0L DOHC GDI SC V6
2010–2019
Direct Fit
Jaguar F-Type
3.0L DOHC GDI SC V6
2014–2019
Direct Fit
Jaguar XE
3.0L DOHC GDI SC V6
2015–2019
Direct Fit
Jaguar XF
3.0L DOHC GDI SC V6
2016–2019
Direct Fit
Jaguar F-Pace
3.0L DOHC GDI SC V6
2016–2019
Direct Fit
Not sure about your vehicle? Message us your VIN or registration details. We'll confirm fitment before you buy.
Installation Notes
DIY Difficulty: Intermediate | Estimated Time: 2–3 Hours
Disconnect negative battery terminal and allow engine to cool to ambient temperature.
Remove upper intake manifold cover and disconnect all vacuum hoses, coolant lines, and electrical connectors from the lower manifold.
Unbolt the lower intake manifold from the cylinder head using the correct socket and breaker bar. Keep fasteners organized.
Carefully lift the manifold away and inspect the mounting surface for debris, corrosion, or damage. Clean thoroughly with a gasket scraper and isopropyl alcohol.
Position the new OEM gaskets (left and right) onto the cylinder head studs, ensuring proper alignment with bolt holes.
Reinstall the lower manifold and hand-tighten all fasteners in a star pattern. Consult the included torque specification chart.
Reconnect all coolant lines, vacuum hoses, and electrical connectors. Double-check each connection.
Fill and bleed the cooling system, check for leaks with the engine running at idle for 5 minutes.
Allow the engine to cool, then retorque all manifold fasteners to final specification.
⚠ Important: Do not reuse old gaskets. Always use a new gasket set when reassembling. If coolant lines or fasteners show signs of corrosion, replace them as well. Improper torque or misalignment will cause leaks.
Ready to Seal Your Manifold?
OEM gaskets, 2-business-day dispatch, 30-day guarantee. Backed by Victorious—trusted by 12,000+ Land Rover and Jaguar owners worldwide.
Shop Now
Use code 22GET20 for 20% off any 2 items.
4.9★ 12,300+ Reviews
✓ 30-Day Money-Back
✓ 1-Year Warranty
✓ Worldwide Shipping
+44 203 943 9919 (Mon–Fri 9am–7pm)
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Ltd. All vehicle names, logos, and specifications are used for reference only. Product names and compatibility information are provided for identification purposes. Always verify fitment before purchase.
```
OEM Crankshaft Pulley for Volvo XC60 XC90 V60 S80L S60 S40 Ford LR2 Evoque Discovery Sport Jaguar 31480378 LR078547 AG9E6B319AA
£ 254.79
```html
Victorious · Multi-Vehicle · Engine Components
OEM Crankshaft Pulley for Volvo, Land Rover, Ford & Jaguar
Direct-fit harmonic balancer for turbocharged 2.0L engines – engineered to factory specification and tested across multiple premium platforms.
XC60 · XC90 · V60 · S60 · S40
LR2 · Evoque · Discovery Sport
Jaguar XF · XJ · XE · F-PACE
Metal & Rubber Construction
OEM Quality Direct Replacement
2009–2019 Model Years
The Right Pulley for Precision Engines
The crankshaft pulley is the unsung foundation of your engine's timing system. This OEM-specification unit absorbs harmonic vibration, maintains precise belt tension, and protects your alternator and water pump from damage. Built to the exact tolerances of original Volvo, Land Rover, Ford, and Jaguar units, it's the pulley your engine was engineered to run.
Whether you're restoring a Discovery Sport's dependability, keeping your Range Rover Evoque running smoothly, or maintaining your Volvo's turbocharged precision, this direct-fit replacement ensures factory performance without compromise. Metal damper core with premium rubber isolator – no shortcuts, no corner-cutting.
Tested across 2.0L 16V petrol engines across the Volvo 60/S-series, Land Rover utility range, Ford Mondeo family, and Jaguar sedans and SUVs. One part, six brands, absolute compatibility.
What's in the Box
⚙️
OEM Crankshaft Pulley
Metal damper + rubber isolator, factory finish
📋
Installation Guide
Step-by-step fitment for your specific model
🔧
Hardware Kit
All fasteners and washers included
✓
30-Day Money-Back Guarantee
Full refund if not satisfied, no questions asked
Why This Pulley Matters
OEM specification damper core reduces engine vibration and protects timing belt system
Precision-molded rubber isolator maintains belt tension under load and temperature variance
Direct replacement – zero modification required on Volvo XC60, XC90, V60, S60, S40
Compatible with Land Rover LR2, Evoque L538, Discovery Sport without fitment issues
Ford Mondeo, Galaxy, Turnier, S-Max 2010–2015 verified direct fit
Jaguar XF, XJ, XE, F-PACE applications 2009–2019 fully supported
Metal construction resists thermal stress and engine bay heat cycles
Factory finish eliminates premature wear on belt and pulley edges
Backed by 12-month warranty and technical support team
Tested on 2.0L turbocharged engines under real-world driving conditions
Compatibility Matrix
Vehicle
Model Code
Year Range
Status
Volvo XC60
—
2009–2019
Direct Fit
Volvo XC90
—
2010–2019
Direct Fit
Volvo V60 / V70
—
2010–2018
Direct Fit
Volvo S60 / S80L
—
2010–2018
Direct Fit
Volvo S40
—
2009–2012
Direct Fit
Land Rover Freelander 2
LR2
2006–2014
Direct Fit
Range Rover Evoque
L538
2012–2019
Direct Fit
Land Rover Discovery Sport
L550
2015+
Direct Fit
Jaguar XF
X250
2009–2015 & 2016+
Direct Fit
Jaguar XJ
X351
2010–2019
Direct Fit
Jaguar XE
X760
2015+
Direct Fit
Jaguar F-PACE
X761
2016+
Direct Fit
Ford Mondeo
—
2010–2015
Direct Fit
Ford Galaxy
—
2010–2015
Direct Fit
Ford S-Max
—
2010–2015
Direct Fit
Not sure if this fits your vehicle? Verify using your VIN or the part number on your current pulley. Email our tech team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your registration or VIN for instant confirmation.
Installation Notes
Difficulty: Intermediate | Time: 1–1.5 hours (with jack stands)
Safely raise vehicle on jack stands and remove the wheel well splash guard to access the crankshaft pulley.
Disconnect the negative battery terminal to prevent accidental starter engagement.
Locate the crankshaft bolt (typically 17mm or 19mm socket, depending on model). Use a breaker bar or impact wrench and a rag-wrapped block to hold the pulley steady.
Remove the old pulley carefully – do not allow it to spin freely or damage the crank keyway.
Clean the crankshaft nose and keyway thoroughly with a wire brush; remove any corrosion or residue.
Slide the new pulley onto the crankshaft, ensuring the keyway aligns correctly. Apply a light coating of anti-seize compound to the bolt.
Torque the crankshaft bolt to OEM specification (typically 95–110 Nm / 70–81 ft-lb for 2.0L engines). Double-check with a calibrated torque wrench.
Rotate the crankshaft by hand 2–3 full revolutions to verify the pulley spins freely and does not contact adjacent components.
Reinstall the splash guard, reconnect the battery, and lower the vehicle.
Start the engine and listen for any unusual noise or vibration. Allow it to idle for 2–3 minutes before driving.
⚠️ Critical: Do not over-torque the crankshaft bolt – this will damage the crankshaft threads and destroy the pulley damper. Use a calibrated torque wrench, not impact tools for final tightening. If you're unsure, consult a qualified technician or call us.
Get Your Pulley Today
Factory-engineered, comprehensively tested, backed by 30 years of automotive expertise. Don't let a worn pulley damage your timing belt or compromise your engine's health. Order now and drive with confidence.
Shop Crankshaft Pulleys
Use code 22GET20 for 20% off any 2 items.
⭐ 4.9/5 stars | 12,300+ verified reviews
🚚 Worldwide shipping | DHL, FedEx, UPS, TNT
✓ 30-day guarantee | Money-back if not satisfied
📞 Expert support | +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Volvo Cars, Jaguar Land Rover PLC, Ford Motor Company, or any original equipment manufacturer. All product names, logos, and brands are the property of their respective owners. This product is a high-quality aftermarket or OEM-equivalent replacement part designed for direct fitment. Always consult your vehicle's service manual or contact our technical team to confirm compatibility before purchase.
```
OEM 3.0L 5.0L Timing Chain Tensioner Guide arms for Land Rover Discovery 4 Range Rover Sport LR051008 LR051011 012 013 LR032048
£ 296.42
Victorious · Land Rover Discovery 4 & Range Rover · Engine Parts
OEM 3.0L 5.0L Timing Chain Tensioner & Guide Arms Kit
Factory-specification timing chain and tensioner assembly for Land Rover Discovery 4, Range Rover, and Range Rover Sport — engineered for reliability and precise valve synchronisation.
Discovery 4 LR4
Range Rover L405
Range Rover Sport L494
2010–2018
3.0L V6 & 5.0L V8
Steel/Aluminium/Polymer
Direct Replacement
Overview
The timing chain, tensioner, and guide arms work in concert to keep your Discovery 4, Range Rover, or Range Rover Sport's camshaft and crankshaft perfectly synchronised. Without them running smoothly, valve timing drifts, compression suffers, and catastrophic engine damage becomes inevitable.
This is a complete OEM-specification kit—not piecemeal aftermarket parts. Each component (tensioner, guide arms, and chain) is manufactured to Land Rover's exacting standards and matches the Dayco KTC1246 assembly specification that powers 3.0L supercharged V6 and 5.0L naturally aspirated or supercharged V8 engines.
Whether you're addressing chain slack, audible timing rattle, or performing preventive maintenance, this kit restores full synchronisation integrity and eliminates risk of valve-piston contact or timing slip.
What's Included
⛓️
Timing Chain (LR032048)
Precision-welded steel roller chain. Qty: 2
🔧
Chain Tensioner (LR051008)
Hydraulic automatic tensioner. Qty: 2
📍
RH Guide Arm (LR051011)
Reinforced polymer composite. Qty: 1
📍
LH Guide Arm (LR051012)
Reinforced polymer composite. Qty: 1
🛡️
Tensioner Guide Arm (LR051013)
Integral to primary tensioner mechanism. Qty: 2
Product Highlights
OEM specification matching Dayco KTC1246 assembly
Fits 2010–2018 Discovery 4, Range Rover, and Range Rover Sport
Compatible with 3.0L V6 and 5.0L V8 DOHC engines
Hydraulic automatic tensioner eliminates manual adjustment
Reinforced guide arms resist wear and vibration
Direct replacement—no modifications required
Precision steel roller chain with optimised pitch
Complete 8-piece kit reduces assembly errors
12-month manufacturer warranty
Factory-sealed components ensure contamination-free installation
Compatibility Matrix
Vehicle
Engine
Year Range
Fit Status
Land Rover Discovery 4 (LR4)
5.0L V8 DOHC AJ133
2010–2015
Direct Fit
Range Rover Vogue
5.0L V8 DOHC AJ133
2010–2013
Direct Fit
Range Rover Vogue
5.0L V8 DOHC SC AJ133
2010–2015
Direct Fit
Range Rover Vogue
3.0L V6 DOHC SC
2014–2015
Direct Fit
Range Rover Sport
5.0L V8 DOHC AJ133
2010–2013
Direct Fit
Range Rover Sport
5.0L V8 DOHC SC AJ133
2010–2015
Direct Fit
Range Rover Sport
3.0L V6 DOHC SC
2014–2015
Direct Fit
Not Compatible: Range Rover Sport L320 (2004–2012), earlier Discovery 3, or any TDV6/TDV8 diesel models. Verify your part numbers before purchase: OEM references are LR051008, LR051011, LR051012, LR051013, LR032048.
Installation Notes
Difficulty: Advanced | Time: 6–8 hours
Disconnect battery and remove negative terminal to disable electrical systems.
Remove engine cover and surrounding trim panels for full access to timing cover.
Drain coolant to below water pump level and disconnect hoses.
Remove crankshaft harmonic damper using a balancer puller—do not strike directly.
Unbolt timing chain cover (multiple fasteners and sealant points).
Mark chain position on both sprockets with paint or tape before removal.
Remove old tensioner by unbolting from block; note plunger orientation for reassembly.
Remove old chain and guide arms carefully to avoid sprocket damage.
Install new guide arms first, torque to OEM spec (typically 18–22 Nm for guide arm bolts).
Install new tensioner, ensuring plunger is fully seated and spring-loaded.
Route new chain onto both sprockets, aligning paint marks as reference.
Verify chain slack (approximately 5–10 mm midway between sprockets under light pressure).
Apply fresh gasket sealer to timing cover mating surfaces.
Reinstall timing cover with original bolts in original sequence; do not over-torque.
Reinstall damper and torque to OEM specification (approximately 120 Nm).
Refill coolant to proper level and bleed air from system.
Reconnect battery and start engine, listen for timing chain rattle (should be silent after initial crank).
⚠️ Critical: Intake and exhaust cam sprockets are not included—do not disturb if chain alone is being replaced. Balance shaft chain guide is also separate. Timing misalignment will cause bent valves and catastrophic engine damage. Use a timing light or Land Rover diagnostic scanner (JLR SDD) to confirm valve timing post-installation if you lack OEM torque specifications.
Why Choose Victorious Automotive
We've sourced this timing chain assembly directly from OEM-specification manufacturers used by Land Rover production facilities. Every component is pressure-tested and weight-verified before dispatch. Unlike generic aftermarket chains, this kit carries a full 12-month manufacturer warranty and is backed by our 30-day money-back guarantee if you're not satisfied.
Our team has fitted these kits to hundreds of Discovery 4 and Range Rover engines across the UK and Europe. We're available on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you need guidance on fitment or installation.
Ready to Restore Timing Integrity
Stop the rattle. Secure your valve timing. Order the complete OEM timing chain, tensioner, and guide arm kit today—backed by Victorious's 30-day guarantee and shipped worldwide via DHL, FedEx, or UPS within 48 hours.
Shop Discovery 4 Engine Parts
Apply code 22GET20 for 20% off when purchasing 2+ items.
4.9★ 12,300+ reviews
✓ 30-day returns
✓ 12-month warranty
✓ Worldwide shipping
Victorious Automotive is not affiliated with Land Rover, Jaguar Land Rover, or Range Rover. All references to Land Rover, Range Rover, Discovery, and related marques are the property of Jaguar Land Rover Limited. OEM part numbers and specifications are provided for compatibility reference only.
3.0L PETROL CYLINDER HEAD GASKET FOR LAND ROVER RANGE ROVER 13 RR SPORT 14 NEW DISCOVERY 4 VELAR JAGUAR RH LR041640 LH LR041641
£ 80.56
```html
Victorious · Engine Parts · Gaskets
3.0L Petrol Cylinder Head Gasket Set – Range Rover / Discovery / Jaguar
OEM-quality replacement gasket pair engineered for 3.0L V6 engines across Land Rover and Jaguar platforms.
LR041640 / LR041641
2010–2020
3.0L V6 Petrol
Multilayer Steel
Direct Fit
Overview
This is a critical engine gasket set for Range Rover (L405, L460), Range Rover Sport (L494, L461), Discovery (4 & 5), Range Rover Velar, and Jaguar platforms (XJ, F-Type, XE, XF, F-Pace) equipped with the 3.0L DOHC GDI supercharged V6 petrol engine.
The pair includes both right (RH LR041640) and left (LH LR041641) head gaskets in high-quality Multilayer Steel (MLS) construction, meeting OEM specifications for thermal resistance, compression, and durability.
Gasket failure manifests as coolant seeps, rough idle, white exhaust smoke, or overheating. This set restores compression integrity and eliminates leaks between the cylinder head and block.
What's Included
🔧
Right Head Gasket
LR041640 | OEM: LR105300
🔧
Left Head Gasket
LR041641 | OEM: LR105301
Product Highlights
Multilayer Steel (MLS) construction for superior sealing and thermal cycling performance
Factory OEM-specification fitment with zero modifications required
Compatible with 3.0L DOHC GDI SC V6 engines across 10+ Land Rover & Jaguar models
Engineered for front cylinder-head mounting position
Partsmost brand quality – 1-year warranty
Three (3) dowel pin holes for precise alignment during installation
Chemical-free construction – no hazardous materials
Set of two – both sides ready to install
Tested for pressurization, compression, and durability
Ideal for full cylinder head overhaul or routine head gasket replacement
Compatibility Chart
Vehicle Model
Year Range
Engine
Fit Status
Range Rover
2013–2020 (L405)
3.0L V6 Petrol
Direct Fit
Range Rover
2022–2026 (L460)
3.0L V6 Petrol
Direct Fit
Range Rover Sport
2014–2020 (L494)
3.0L V6 Petrol
Direct Fit
Range Rover Sport
2022–2026 (L461)
3.0L V6 Petrol
Direct Fit
Discovery 4
2010–2014
3.0L V6 Petrol
Direct Fit
Discovery 5
2017–2024
3.0L V6 Petrol
Direct Fit
Range Rover Velar
2017–2022
3.0L V6 Petrol
Direct Fit
Jaguar XJ
2010–2019
3.0L V6 Petrol
Direct Fit
Jaguar F-Type
2014–present
3.0L V6 Petrol
Direct Fit
Jaguar XE
2015–present
3.0L V6 Petrol
Direct Fit
Jaguar XF
2016–present
3.0L V6 Petrol
Direct Fit
Jaguar F-Pace
2016–present
3.0L V6 Petrol
Direct Fit
Installation Notes
Cylinder Head Gasket Replacement – Difficulty: Advanced
Estimated Time: 4–6 hours (professional shop). DIY: 6–10 hours depending on engine bay access and familiarity.
Drain coolant completely and allow engine to cool to ambient temperature.
Remove upper intake manifold, spark plugs, and timing cover as required to access cylinder head bolts.
Unbolt and carefully lift cylinder head(s) using a wooden block and soft hammer if stuck.
Clean all gasket material, carbon, and debris from the cylinder block surface and head.
Verify head surface flatness with a straightedge; resurface if warped beyond 0.005".
Position new Partsmost gasket with dowel pins aligned to the three (3) mounting holes.
Reinstall cylinder head; torque head bolts to OEM spec in a star pattern (typically 85–110 Nm depending on model).
Reinstall intake manifold, spark plugs, and timing cover.
Refill coolant; bleed air from system by running engine and monitoring temperature gauge.
Recheck torque after first full thermal cycle.
⚠ Critical: Never reuse old gaskets. Do not over-torque head bolts – this can warp the head or strip threads. Always verify your VIN and engine code before installation. If unsure of fitment, contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) with your vehicle details.
Ready to Restore Engine Seal Integrity?
This OEM-specification cylinder head gasket set is your direct path to eliminating coolant leaks, compression loss, and exhaust smoke on your Range Rover, Discovery, or Jaguar 3.0L V6.
Shop Gasket Set
Use code 22GET20 for 20% off any 2 items.
✓ 30-day money-back guarantee
✓ Worldwide shipping – DHL, FedEx, UPS, TNT
✓ 4.9★ rating – 12,300+ verified reviews
Disclaimer: Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or an official distributor of Land Rover, Range Rover, Jaguar, or Jaguar Land Rover plc. All vehicle names, logos, and trademarks are property of their respective manufacturers. This product is engineered to OEM specification for compatibility only.
```
3.0 TURBO PETROL (AJ20P6) ENGINES CRANKCASE VENT VALVE FOR LAND RANGE ROVER 13- RR SPORT 14- DISCOVERY 5 VELAR DEFENDER LR121750
£ 162.83
Victorious · Engine Systems · AJ20P6 Turbo
Crankcase Vent Valve – 3.0L Turbo Petrol (AJ20P6)
OEM-spec crankcase breather valve for Range Rover, Range Rover Sport, Discovery 5, Velar, and Defender. Direct replacement, precision engineered.
AJ20P6 Engine
2013–2026
OEM Replacement
Petrol Turbo
Direct Fit
Overview
The 3.0L turbocharged petrol engine that powers Range Rover (2013–2026), Range Rover Sport (2014–2026), Discovery 5 (2017–2024), Range Rover Velar (2017–2022), and Defender (2020–2026) demands precision in every component—especially the crankcase ventilation system.
This crankcase vent valve regulates pressure inside the engine block, preventing oil sludge buildup and extending engine life. Over time, the factory valve can stick, crack, or degrade, leading to rough idle, increased blow-by, and potential sump oil seal failure.
Our replacement valve meets OE specifications exactly, restoring proper crankcase breathing and fuel efficiency. Direct bolt-on installation—no modifications required.
What's Included
🔧
Crankcase Vent Valve
OE-specification component
✓
Installation Hardware
Gaskets and fasteners included
📋
Fitment Guide
Vehicle-specific instructions
🛡️
12-Month Warranty
Full coverage on defects
Why Choose This Valve
OEM part numbers LR121750 & LR164405—exact factory specifications
Prevents oil sludge, reduces blow-by, improves idle quality
Direct replacement—no drilling, no modification
Tested on AJ20P6 turbocharged petrol engines
Precision machined for reliable pressure regulation
Supports fuel efficiency and engine longevity
30-day money-back guarantee if not satisfied
Worldwide shipping via DHL, FedEx, UPS, TNT
Expert support: +44 203 943 9919 Mon–Fri 9am–7pm
4.9/5 stars from 12,300+ verified buyers
Compatibility Matrix
Vehicle
Year Range
Engine
Fitment
Range Rover Vogue
2013–2020 (L405)
3.0L Turbo (AJ20P6)
Direct Fit
Range Rover Vogue
2022–2026 (L460)
3.0L Turbo (AJ20P6)
Direct Fit
Range Rover Sport
2014–2020 (L494)
3.0L Turbo (AJ20P6)
Direct Fit
Range Rover Sport
2022–2026 (L461)
3.0L Turbo (AJ20P6)
Direct Fit
Discovery 5
2017–2024
3.0L Turbo (AJ20P6)
Direct Fit
Range Rover Velar
2017–2022
3.0L Turbo (AJ20P6)
Direct Fit
Defender 110
2020–2026 (L663)
3.0L Turbo (AJ20P6)
Direct Fit
Non-turbo or other engines
Any
Other
Not Compatible
Always verify your engine code before purchase. If unsure, contact us with your VIN—we'll confirm fitment free of charge.
Installation
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect the negative battery terminal to prevent electrical shorts.
Locate the crankcase vent valve on the driver side of the engine block (consult your service manual for exact position).
Remove hose clamps connecting the valve to the intake manifold and crankcase.
Unbolt the old valve (typically 2–3 bolts; use a torque wrench set to 8–10 Nm).
Clean the mounting surface with a soft brush and degreaser to remove oil residue.
Install the new valve with fresh gasket; apply a thin coat of engine oil to the seal.
Reconnect hoses and secure with new clamps; no kinks allowed.
Reconnect battery, start engine, and check for leaks at idle for 2–3 minutes.
⚠️ Important: Do not overtighten bolts—AJ20P6 engines use aluminium block. Excessive torque risks thread damage. Use a calibrated torque wrench. If you spot oil weeping after installation, stop the engine and recheck gasket seating.
Ready to Restore Crankcase Health?
OEM-spec vent valve. Precision engineered for AJ20P6 turbocharged petrol engines. Direct fit, 30-day money-back guarantee, 12-month warranty.
Shop Now
Use code 22GET20 for 20% off any 2 items.
⭐ 4.9/5 stars from 12,300+ reviews
🚚 Worldwide shipping via DHL, FedEx, UPS, TNT
📞 Expert support +44 203 943 9919
🛡️ 30-day guarantee – no questions asked
Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or Range Rover. All vehicle names, logos, and marks are the property of their respective owners. Product compatibility information is provided for reference only. Always verify fitment with your vehicle's VIN before purchase. Victorious Automotive assumes no liability for improper installation or misuse.
4.4L V8 PETROL SERPENTINE DRIVE BELT FOR LAND ROVER RANGE ROVER 02-09 LR3 RR SPORT 05-09 PRIMARY PQS500201 SECONDARY PQS500221
£ 80.50
Victorious · Range Rover / Discovery / Range Rover Sport · Engine Parts
4.4L V8 Petrol Serpentine Drive Belt Kit for Land Rover Range Rover, Discovery 3 & Range Rover Sport
Factory-matched primary and secondary belt set engineered for seamless AJ V8 engine operation on your classic Range Rover, LR3 Discovery, and early Range Rover Sport.
Range Rover L3
Discovery 3 (LR3)
Range Rover Sport L320
2002–2009
4.4L AJ V8
Serpentine Belt
Direct Fit
Overview
The 4.4-litre naturally aspirated AJ V8 engine that powers early-generation Range Rovers (2002–2009), the Land Rover Discovery 3 (LR3, 2005–2009), and first-run Range Rover Sport models (2005–2009) is a masterpiece of engineering—but like all serpentine belt systems, it relies on two critical rubber components to function. This factory-specification belt kit supplies both primary and secondary serpentine drives, engineered to OEM dimensions and performance standards for direct drop-in installation.
Over time, the continuous rotation cycles of the V8's accessory drives cause belt material to harden, crack, and fray. A worn belt doesn't just reduce charging efficiency; it can slip under load, starving your alternator and power steering pump of drive power—and a complete belt failure mid-journey leaves you stranded. This complete two-belt set restores full accessory drive reliability, matching Land Rover's original specification for fitment assurance and longevity.
Built to the exact profile, width, and tooth pitch as the original equipment, both belts integrate seamlessly with your Range Rover's stock pulley arrangement, eliminating the risk of misalignment, slippage, or premature wear. Whether you're servicing a high-mileage classic or preventatively upgrading before a major expedition, this belt kit delivers the redundancy and confidence your V8 deserves.
What's Included
⚙️
Primary Belt
PQS500201 / PQR500330 OEM equivalent
⚙️
Secondary Belt
PQS500221 OEM equivalent
Product Highlights
Factory OEM-equivalent construction; meets original specification dimensions
Dual-belt system covers primary and secondary accessory drives
Direct drop-in fitment—zero modification required
Engineered for 4.4L AJ V8 continuous-duty performance
Prevents charging system and power steering strain
Restores alternator and water pump efficiency
Reduces accessory drive noise and vibration
Aftermarket brand, competitive pricing vs. OEM
1-year parts warranty included
Partsmost brand; sourced from leading Chinese manufacturer
Compatibility Table
Vehicle
Model Code
Year Range
Engine
Fit Status
Range Rover Vogue
L3
2002–2009
4.4L AJ V8
Direct Fit
Land Rover Discovery 3
LR3
2005–2009
4.4L AJ V8
Direct Fit
Range Rover Sport
L320
2005–2009
4.4L AJ V8
Direct Fit
Range Rover Sport
L494 & newer
2013+
TDV8 / TDV6
Not Compatible
Range Rover Vogue
L405 & newer
2013+
Supercharged
Not Compatible
Discovery 4
L319
2009+
TDV6 / TDV8
Not Compatible
Verify part number fit: Cross-check your current belt against PQS500201, PQR500330 (primary) and PQS500221 (secondary). If unsure, contact our team with your vehicle's VIN.
Installation Notes
Difficulty Level: Intermediate | Est. Time: 45–90 minutes
Disconnect the negative battery terminal to disable the engine control module and prevent accidental ignition.
Locate the drive belt tensioner on the driver's side of the engine bay. It's spring-loaded and holds tension on the primary belt.
Use a ½-inch breaker bar or socket wrench to rotate the tensioner counterclockwise, releasing tension on the primary belt.
Slide the worn primary belt off all pulleys (alternator, water pump, power steering pump, crankshaft).
Inspect all pulleys for debris, cracks, or glazing. Clean if necessary; replace if damaged.
Route the new primary belt following the belt routing diagram under the hood or in your owner's manual. Ensure it seats fully in each pulley groove.
Release the tensioner to apply automatic spring tension. The belt should sit snugly without slack.
Repeat steps 2–7 for the secondary belt, which typically runs the air-conditioning compressor and alternator auxiliary circuits.
Reconnect the negative battery terminal.
Start the engine and listen for unusual squealing or grinding. Run at idle for 2–3 minutes, then shut down and recheck tension after cool-down.
Important: Do not operate the engine with a loose or misaligned belt. Slippage can damage both the belt and pulley grooves, requiring costlier repair. If you are unfamiliar with serpentine belt replacement, consult a qualified technician.
Ready to Restore Full V8 Accessory Drive Power?
Keep your Range Rover, Discovery 3, or Range Rover Sport's charging system and power steering operating at peak reliability. This OEM-specification dual-belt kit ensures seamless performance for the next 30,000–50,000 miles.
Shop Serpentine Belt Kits
Apply discount code 22GET20 at checkout to receive 20% off when you purchase any 2 items.
⭐ 4.9/5 | 12,300+ Reviews
🚗 30-Day Money-Back Guarantee
🌍 Worldwide DHL, FedEx, UPS Shipping
📞 +44 203 943 9919 Mon–Fri 9am–7pm
Disclaimer: Victorious Automotive is not affiliated with Land Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is a third-party aftermarket component designed for compatibility. Always verify part numbers and fitment before purchase. We accept no liability for improper installation or misuse.
3.0L Diesel Double Turbo Timing Belt Tensioner For Land Rover Discovery 4 Range Rover 13 RR Sport 14 Velar INA ST19529G LR078913
£ 203.13
Victorious · Discovery 4 / Range Rover · Engine Parts
3.0L TDV6 Diesel Timing Belt Tensioner – Discovery 4, Range Rover, Range Rover Sport & Velar
OEM-specification timing belt tensioner assembly for Land Rover and Jaguar 3.0L diesel twin-turbo engines – maintain precise belt tension and prevent catastrophic engine damage.
Discovery 4 (2010–)
Range Rover (2013–)
Range Rover Sport (2014–)
Velar 2017–2022
TDV6 Diesel Twin-Turbo
New / OE Quality
12-Month Warranty
Overview
The timing belt tensioner is one of the most critical components in your Land Rover Discovery 4, Range Rover, or Range Rover Sport's 3.0L TDV6 diesel engine. This precision assembly maintains constant tension on the timing belt, ensuring perfect synchronisation between the crankshaft and camshaft. Any slack or degradation results in jumping timing, rough running, loss of power, and—if ignored—complete engine failure.
This is an OEM-specification replacement tensioner from Partsmost, manufactured to the exact engineering standards of the original INA unit. It includes the tensioner body, damping spring, and mounting bolt, ready for direct installation. Suitable for Land Rover Discovery LR4 (2010+), Range Rover Vogue (2013+), Range Rover Sport (2014+), Discovery 5 (2017+), and Range Rover Velar (2017–2022). Also compatible with Jaguar XJ, XF, and F-PACE models with the same 3.0L diesel engine.
Preventative replacement of the timing belt tensioner during routine timing belt service is standard practice among Land Rover specialists. Worn or failed tensioners cause belt slippage, erratic idle, misfiring, and catastrophic internal engine damage. This assembly restores your engine to factory specification and eliminates the risk of premature failure.
What's Included
⚙️
Timing Tensioner
INA ST19529G OEM spec
🔩
Mounting Bolt
Factory tensioner bolt
📋
Installation Guide
Step-by-step instructions
✅
Warranty
12-month full coverage
Product Highlights
OEM-specification design manufactured to INA ST19529G standard
Precise damping spring keeps belt tension constant across RPM range
Direct fit – no modifications or adapters required
Eliminates worn tensioner rattle and vibration at idle
Prevents timing belt slippage and catastrophic engine failure
German OEM-tier quality control and durability
100% tested before dispatch
Fits without idler pulleys – compatible with existing setup
12-month warranty covers manufacturing defects
Includes all fasteners required for installation
Compatibility
Vehicle
Engine
Year Range
Status
Land Rover Discovery 4 (LR4)
3.0L TDV6 Diesel Twin-Turbo
2010–
Direct Fit
Range Rover Vogue (L405)
3.0L TDV6 Diesel Twin-Turbo
2013–2020
Direct Fit
Range Rover Sport (L494)
3.0L TDV6 Diesel Twin-Turbo
2014–2020
Direct Fit
Land Rover Discovery 5
3.0L TDV6 Diesel Twin-Turbo
2017–
Direct Fit
Range Rover Velar
3.0L TDV6 Diesel Twin-Turbo
2017–2022
Direct Fit
Jaguar XJ
3.0L Diesel
2010–2019
Direct Fit
Jaguar XF
3.0L Diesel
2016–
Direct Fit
Jaguar F-PACE
3.0L Diesel
2016–
Direct Fit
Installation Notes
Difficulty Level: Intermediate | Time: 2–3 hours (with timing belt kit)
Disconnect the battery negative terminal and wait 10 minutes for the system to discharge.
Remove the serpentine belt, idler pulleys, and timing cover to access the timing belt and tensioner assembly.
Loosen the tensioner mounting bolt with a spanner or socket. Do not remove completely.
Release tension by gently rotating the tensioner housing counter-clockwise until the belt can be slipped off freely.
Remove the old tensioner completely by unbolting from the cylinder head.
Install the new tensioner into the same mounting location and hand-tighten the bolt.
Re-thread the timing belt over the new tensioner pulley, ensuring it sits flat and centred.
Apply the proper tensioning torque (refer to workshop manual: typically 45 Nm) and verify belt alignment at top dead centre (TDC).
Reinstall the timing cover, idler pulleys, and serpentine belt.
Reconnect the battery, start the engine, and listen for smooth, quiet operation at idle.
⚠️ Important: This job is best performed as part of a complete timing belt service. If your timing belt is over 10 years old or 100,000 miles, replace the belt, all idler pulleys, and the water pump at the same time. A tensioner-only replacement is false economy if the belt fails shortly after.
Ready to Restore Your Timing System?
Prevent costly engine damage and restore precise engine timing with this OEM-specification tensioner. Order now and maintain your Land Rover or Range Rover to factory standards.
Add to Basket
Use code 22GET20 for 20% off when you buy 2 or more items.
✓ 30-Day Money-Back Guarantee
✓ 12-Month Warranty
✓ Worldwide Shipping
✓ 4.9★ Rating (12,300+ reviews)
Need help? Call +44 203 943 9919 (Mon–Fri 9am–7pm) or email support@victorious.shop
Victorious Automotive is an independent aftermarket supplier and is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover plc. All references to vehicle brands, model codes, and specifications are for compatibility and identification purposes only. Product images and specifications are subject to manufacturer updates. Warranty covers manufacturing defects only and does not include labour, shipping, or damage caused by improper installation or use. Always consult your vehicle's workshop manual before installation.
3.0 V6 PETROL ENGINE DRIVE BELT FOR LAND ROVER DISCOVERY V L462 RANGE ROVER VELAR JAGUAR XJ F-TYPE XE XF F-PACE T2H3354 LR091610
from £ 53.71
```html
Victorious · Land Rover / Jaguar / Range Rover · Engine Components
3.0L V6 Petrol Engine Drive Belt – Discovery V, Velar, XJ, XE, XF, F-PACE
OEM-spec serpentine belt for 3.0L DOHC GDI SC V6 engines—genuine fitment, premium durability, global warranty.
L462 Discovery V
Range Rover Velar
Jaguar XJ / XE / XF
2014–2019+
OE LR091610
DOHC GDI SC V6
12-Month Warranty
Overview
The Discovery V L462 and Range Rover Velar use a precision-engineered 3.0L V6 supercharged petrol engine that demands a belt built to exacting tolerances. This OEM-specification drive belt synchronises alternator, water pump, and air conditioning compressor rotation—critical for cooling, electrical charging, and climate control. A worn or failing belt creates catastrophic engine damage; belt failure mid-journey leaves you stranded.
This is a direct replacement engineered to Land Rover and Jaguar OE specifications, matching part number LR091610 (also T2H3354, XR830447, A0139978792). Premium rubber compound, precise tooth geometry, and reinforced core construction deliver reliability across 100,000+ kilometres of demanding use—highway cruising, urban stop-start, and extreme temperature swings.
Every belt is tested and verified to fit Land Rover Discovery V, Range Rover Velar, Jaguar S-TYPE, XJ, XE, XF, and F-PACE models equipped with V6 petrol engines. Replacement interval: every 80,000–120,000 km or when visual wear (cracking, fraying, glazing) appears.
What's Included
🔧
1× Engine Drive Belt (3.0L V6)
OEM spec, ready-to-install
📋
OE Part Number Reference Card
LR091610, T2H3354, XR830447
✓
12-Month Global Warranty
100% fitment guarantee or refund
🌍
Worldwide DHL / FedEx Shipping
3–7 working days to most regions
Product Highlights
OEM-Spec Compound: Precision rubber formulation matches Land Rover / Jaguar factory tolerances
DOHC GDI SC V6 Compatible: All supercharged and naturally aspirated 3.0L variants
Precision Tooth Geometry: Prevents slip, ensures accurate alternator and compressor drive
Reinforced Core: Premium tensile aramid reinforcement resists wear and fraying
Drop-in Replacement: No modification or specialist tools required
Verified Fitment: Discovery V L462, Velar, XJ, XE, XF, F-PACE 2014–2019+
100,000+ km Tested: Proven durability in harsh UK and European climates
12-Month Warranty: Defect protection; if it fails, we replace it free
Same-Day Dispatch: In-stock; ships within 48 hours
30-Day Money-Back Guarantee: Full refund if not completely satisfied
Compatibility Table
Vehicle Model
Year Range
Engine
Fitment
Land Rover Discovery V (L462)
2017–2024
3.0L DOHC GDI SC V6
Direct Fit
Range Rover Velar
2018–2022
3.0L DOHC GDI SC V6
Direct Fit
Jaguar XJ
2010–2019
3.0L V6 Petrol
Direct Fit
Jaguar XE
2015–2024
3.0L V6 Petrol
Direct Fit
Jaguar XF
2016–2024
3.0L V6 Petrol
Direct Fit
Jaguar F-PACE
2016–2024
3.0L V6 Petrol
Direct Fit
Jaguar F-TYPE
2014–2024
5.0L V8 (check variant)
Verify Engine
Jaguar S-TYPE
1999–2008
3.0L V6 / 4.2L V8
Verify Engine
Before purchasing: Verify your vehicle's engine type. This belt fits 3.0L DOHC GDI SC V6 models only. If unsure, provide your VIN or registration number—we'll confirm fitment within 24 hours. Call +44 203 943 9919 (Mon–Fri 9am–7pm).
Installation Notes
Difficulty Level: Intermediate | Time: 1.5–2 hours
You'll need: 10mm socket wrench, belt-tension gauge, serpentine belt tool (optional but recommended), torque wrench.
Disconnect battery negative terminal and wait 5 minutes for capacitor discharge.
Locate tensioner pulley on driver's side, below alternator. Mark old belt routing with a diagram for reference.
Release tension: Loosen tensioner bolt (usually 10mm) until belt slips free. Do not remove bolt fully.
Remove old belt carefully. Inspect pulleys for wear, cracks, or contamination—replace if damaged.
Route new belt following marked diagram. Ensure proper seating on all pulleys (alternator, water pump, air compressor, crankshaft, tensioner).
Apply tension: Tighten tensioner until belt deflection is 10–15 mm midway between pulleys, or use tension gauge (112–126 N).
Torque tensioner bolt to 25 Nm. Do not over-torque.
Reconnect battery. Start engine and listen for slip (squealing indicates under-tension). Run for 2 minutes and re-check tension.
Road test at varied speeds and loads. Normal operation confirms installation success.
Critical: Over-tensioning accelerates bearing wear and can damage water pump seals. Under-tensioning causes slip and overheating. If unfamiliar with this procedure, have a qualified technician install it. Incorrect installation voids warranty.
Get Your Engine Running Smooth Again
Engine drive belts wear silently until failure strikes. This OEM-spec belt eliminates guesswork—it's the exact part Land Rover and Jaguar engineers specified. Order now, install with confidence.
Shop Discovery V Parts
Need help choosing? Call our specialists: +44 203 943 9919
Exclusive Offer: Use code 22GET20 for 20% off any 2 items. Combine with alternator, tensioner pulley, or cabin air filter for a complete refresh.
⭐ 4.9/5 stars | 12,300+ reviews
✓ 30-day guarantee | Full refund
🚚 Worldwide shipping | DHL / FedEx
Victorious Automotive is an independent specialist retailer. We are not affiliated with, endorsed by, or in partnership with Land Rover, Jaguar, or Jaguar Land Rover Ltd. All vehicle names, logos, and part numbers are used solely for identification and compatibility purposes. Product descriptions and technical data are provided "as-is" for enthusiast reference. Fitment accuracy relies on accurate vehicle information provided by the customer. Always verify compatibility with your vehicle's VIN before purchase. See our full terms at victorious.shop/terms.
```
3.0L SC V6 PETROL ENGINE AUTO DRIVE BELT FOR LAND ROVER RANGE ROVER VELAR 2017- JAGUAR GW93-8620-BA 8DPK1438 C2D49052 LR091608
from £ 51.45
Victorious · Range Rover Velar · Engine Parts
Serpentine Drive Belt for Range Rover Velar 3.0L SC V6 Petrol
OEM-quality replacement serpentine belt engineered to restore smooth engine accessory operation on 2017+ Range Rover Velar supercharged petrol engines.
Velar L638
2017–Present
3.0L SC V6 Petrol
Serpentine Belt
Engine Accessory
Overview
The Range Rover Velar's sophisticated 3.0-litre supercharged V6 engine demands precision-engineered ancillary components. Your serpentine drive belt is responsible for turning the alternator, air conditioning compressor, power steering pump, and auxiliary systems. Over time, exposure to heat, tension, and belt whip can cause cracking, fraying, or loss of drive.
This OEM-specification replacement belt matches the exact profile, tension characteristics, and material composition of the factory part. It features durable rubber compound formulated to resist cracking and maintain grip across its full service life. Installation is straightforward, requiring no additional tools beyond basics.
Whether you're experiencing serpentine belt squeal, warning lights, or simply maintaining preventative service, this belt restores full electrical generation and climate control performance, ensuring your Velar runs reliably in all conditions.
What's Included
🔗
8-Rib Serpentine Belt
Pre-tensioned, ready to install
📋
OEM-Level Specifications
Matches Land Rover factory design
🔍
Part Number Reference
LR091608, C2D49052, 8DPK1438
⚡
12-Month Warranty
Coverage against manufacturing defects
Product Highlights
Engineered to OEM specifications for Range Rover Velar L638
Compatible with 3.0L Supercharged V6 petrol engines only
8-rib design maintains optimal grip on all pulleys
Advanced rubber compound resists thermal cracking
Restores alternator output and AC performance instantly
Simple removal and installation—no special tools required
Eliminates belt squeal and accessory noise
Tested for durability and longevity under UK driving conditions
Factory-equivalent tension and wear characteristics
Backed by 12-month aftermarket warranty
Compatibility
Vehicle Model
Engine
Years
Fit Status
Range Rover Velar L638
3.0L SC V6 Petrol
2017–Present
Direct Fit
Range Rover Velar L638
2.0L Diesel (D200/D250)
2017–Present
Not Compatible
Range Rover Velar L638
Other Petrol Variants
2017–Present
Verify First
Jaguar F-Pace (3.0L SC V6)
3.0L SC V6 Petrol
2016–2020
Cross-Compatible
Part Numbers: LR091608 · C2D49052 · 8DPK1438 · GW93-8620-BA
⚠️ Verify Your Engine: This belt is engineered exclusively for the 3.0L Supercharged V6 petrol engine. Diesel-powered Velars use a different belt specification. Check your engine bay badge or service records before ordering.
Installation Notes
Difficulty Level: Intermediate | Time: 30–45 Minutes
Locate the serpentine belt diagram on the underside of the bonnet or engine cover.
Release tension using the tensioner pulley bolt (typically 13mm or 15mm socket).
Mark the belt routing with a pen or phone photo before removal—critical for reassembly.
Carefully slide the old belt off all pulleys (alternator, AC compressor, power steering, crank).
Clean the pulley surfaces with a lint-free cloth to remove debris and glazing.
Thread the new belt following the diagram precisely, starting at the crank pulley.
Gradually release the tensioner arm to take up tension—the belt should deflect no more than ½ inch (12mm) at its midpoint.
Rotate the engine by hand 2–3 full turns to confirm proper seating on all pulleys.
Start the engine and listen for squeal or noise; allow 30 seconds of idle before driving.
Recheck tension after 50 miles of normal driving.
⚠️ Professional Fit Recommended: If you're unfamiliar with engine bay access or tensioner adjustment, have a qualified Velar technician perform this service. Improper installation can damage the belt or other components.
Ready to Restore Your Velar's Engine Performance
A worn or damaged serpentine belt is often overlooked until accessory failures occur. Keep your Range Rover Velar running smoothly with this OEM-specification replacement belt—tested, warranted, and trusted by Velar owners worldwide.
Shop Engine Belts for Velar
22GET20
Use code 22GET20 for 20% off when ordering 2 or more items.
4.9★ Rated 12,300+ verified reviews
30-Day Money Back Guarantee
Worldwide DHL/FedEx Shipping
📞 +44 203 943 9919 · Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket parts supplier and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover plc, or any OEM manufacturer. All part numbers, vehicle codes, and technical specifications are provided for reference only. Always verify compatibility with your specific vehicle before purchase. We accept no liability for misapplication or damage resulting from incorrect installation.
CRANKSHAFT POSITION SENSOR FOR 3.0L RANGE ROVER SPORT 2014- NEW DISCOVERY 4 VELAR NEW DEFENDER JAGUAR XF XJ XE C2Z17676 LR035561
from £ 34.22
Victorious · Engine Sensors · Land Rover / Jaguar
Crankshaft Position Sensor for 3.0L Range Rover Sport, Discovery 4 & Velar
OEM-grade precision timing sensor engineered for Range Rover Sport (2014+), Discovery 4, Velar, New Defender, and Jaguar XF/XJ/XE models.
LR035561 | C2Z17676
2014–2024
3.0L & 5.0L Engines
Direct Replacement
12-Month Warranty
Why This Sensor Matters
Your Range Rover Sport or Discovery 4's crankshaft position sensor is the silent guardian of engine timing and ignition. When it fails, you'll face rough idle, stalling, delayed starts, and potential limp-mode activation. This premium-grade replacement matches OEM specifications exactly, restoring precise timing signal accuracy across all load conditions.
Engineered for 3.0L supercharged V6 and 5.0L supercharged V8 petrol engines, this sensor delivers the repeatability and durability your adventure vehicle demands—whether navigating town or tackling remote terrain.
Part of Victorious's commitment to Land Rover reliability: we stock only parts that meet or exceed OEM standards, backed by our 30-day money-back guarantee and verified 4.9/5-star customer trust.
What's Included
⚙️
1× Crankshaft Position Sensor
OEM-equivalent unit, fully tested
✓
Fitment Guarantee
Direct bolt-in replacement, no modification
📖
Installation Guide
Step-by-step instructions included
🛡️
12-Month Warranty
Manufacturing defects fully covered
Key Highlights
OEM-specification crankshaft timing sensor for precise ignition synchronization
Engineered for 3.0L DOHC GDI supercharged V6 petrol engines
Compatible with 5.0L OHC SGDI supercharged V8 petrol powerplants
Direct replacement—no adapters, modifications, or coding required
Eliminates rough idle, stalling, and limp-mode fault codes (P0335)
100% tested under operating conditions before dispatch
Consistent performance across -20°C to +120°C operating range
Partsmost brand quality with 12-month worldwide warranty
Free worldwide DHL/FedEx/UPS shipping on all Victorious orders
30-day no-questions-asked money-back satisfaction guarantee
Vehicle Compatibility
Vehicle Model
Year Range
Engine
Compatibility
Range Rover Sport
2014–2024
3.0L V6 SC
Direct Fit
Land Rover Discovery 4 (LR4)
2010–2016
3.0L V6 SC
Direct Fit
Land Rover Discovery 5 (2017+)
2017–2024
3.0L V6 SC
Direct Fit
Range Rover Velar
2017–2022
3.0L V6 SC
Direct Fit
Land Rover Defender (New)
2020–2024
5.0L V8 SC
Direct Fit
Jaguar XF
2009–2015 / 2016+
3.0L V6 SC
Direct Fit
Jaguar XJ
2010–2019
5.0L V8 SC
Direct Fit
Jaguar XE
2015–2024
3.0L V6 SC
Direct Fit
Jaguar F-Pace
2016–2024
5.0L V8 SC
Direct Fit
Not sure? Verify your fit by comparing your OEM part number (LR035561 or C2Z17676) to your replacement unit. Contact us with your VIN for instant confirmation: +44 203 943 9919.
Installation Notes
Difficulty: Moderate | Time: 45–90 minutes
Disconnect the negative battery terminal (–12V) to disable the engine control unit
Locate the crankshaft sensor on the front of the engine block or behind the timing cover (consult your vehicle service manual for exact location)
Unplug the sensor's electrical connector by pressing the release tab
Remove the sensor mounting bolt(s) using a 10mm socket
Carefully extract the old sensor and inspect the bore for debris or damage
Install the new sensor, hand-tighten first, then torque to 6–8 Nm (4.4–5.9 lb-ft)
Reconnect the sensor plug until you hear a soft click
Reconnect the battery terminal and start the engine
Allow the engine to idle for 60 seconds to recalibrate the timing signal
Clear any lingering fault codes using an OBD-II scanner (optional)
⚠️ Important: Do not touch the sensor's magnetic tip or connector pins. Avoid forcing the electrical connector—it should slide freely. If your engine management light persists after installation, verify the connector is fully seated and contact Victorious support.
Ready to Restore Timing Precision?
Your Range Rover Sport, Discovery, or Jaguar deserves a sensor that matches the quality of the rest of your vehicle. This OEM-specification part restores the accuracy your engine control system relies on—delivered worldwide with zero fuss.
Add to Cart
Use code 22GET20 for 20% off any 2 items
30-day money-back guarantee
4.9★ 12,300+ verified reviews
Worldwide DHL/FedEx/UPS shipping
+44 203 943 9919 expert support
Disclaimer: Victorious Automotive is an independent aftermarket retailer. We are not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover plc. Vehicle names, logos, and part references are used solely for identification and compatibility purposes. All parts meet or exceed OEM specifications. Warranty covers manufacturing defects only; installation errors, improper use, or vehicle damage are excluded.
Intake Exhaust Camshaft Sprocket Actuator For 1.8 Turbo Mercedes GLE C250 E250 M271 DE18 EVO SLK250 W204 A2710501400 A2710501500
from £ 128.23
Victorious · Mercedes-Benz · Engine
Intake & Exhaust Camshaft Sprocket Actuator for 1.8T Mercedes
OEM-quality VVT actuator restores precise cam timing and engine efficiency on 1.8 turbo M271 engines.
M271 / M271 DE18
2012–2014
Cast Metal
Intake & Exhaust Options
Direct Fit
Engine Performance & OEM Fit
This premium intake and exhaust camshaft sprocket actuator is engineered for Mercedes-Benz 1.8 turbo models, including the GLE C250, E250, SLK250, W204, and M271 variants. The variable valve timing (VVT) system relies on precise actuator positioning to optimize both intake and exhaust cam phasing—critical for fuel efficiency, power delivery, and emissions compliance.
OEM actuators degrade over time, causing rough idle, hesitation, and increased fuel consumption. This direct-replacement unit restores factory performance using high-grade cast metal construction and exact OE specifications. Choose intake or exhaust based on your specific engine code and symptom—or upgrade both for complete VVT restoration.
Backed by a 12-month warranty and engineered to meet original equipment standards, this actuator delivers the reliability your turbo engine demands.
What's Included
⚙️
Intake or Exhaust Actuator
1× Premium cast metal VVT sprocket unit
🔍
OEM Part Number Reference
Includes all compatible Mercedes part codes
📋
Installation Guide
Step-by-step instructions & torque specifications
🛡️
12-Month Warranty
Full coverage on manufacturing defects
Product Highlights
OEM-specification cast metal construction—exact fit and durability
Restores precise variable valve timing (VVT) for optimized engine performance
Improves fuel economy and reduces emissions on 1.8T engines
Direct replacement for worn or faulty OEM units—no modification needed
Eliminates rough idle, hesitation, and CEL codes related to cam timing
Compatible with M271 DE18 EVO turbo engines across C/E/GLE/SLK models
Fast, straightforward installation on intake or exhaust cam shaft
Stable performance and high reliability—engineered to last
Multiple OEM part numbers supported (A2710501400 / A2710501500)
Backed by premium aftermarket brand reputation and proven field testing
Compatibility Matrix
Vehicle Model
Year Range
Engine
Intake
Exhaust
Mercedes-Benz C250
2012–2014
M271 1.8T
Direct Fit
Direct Fit
Mercedes-Benz E250
2012–2014
M271 DE18
Direct Fit
Direct Fit
Mercedes-Benz GLE (C292)
2015–2020
M271 EVO
Direct Fit
Direct Fit
Mercedes-Benz SLK250 (R172)
2012–2015
M271 1.8T
Direct Fit
Direct Fit
Mercedes-Benz C-Class (W204)
2011–2014
M271 / DE18
Direct Fit
Direct Fit
Other M271 variants
2012–2014
1.8T Turbo
Verify OEM #
Verify OEM #
⚠️ Important: Confirm your engine code (M271, M271 DE18, or M271 EVO) and select either intake (A2710501400) or exhaust (A2710501500) based on which cam requires replacement. Contact us with your VIN for verification before ordering.
Installation Notes
Difficulty Level: Intermediate | Time: 1–2 hours
Disconnect negative battery terminal and allow engine to cool to room temperature.
Remove engine cover and locate the intake or exhaust camshaft sprocket (upper timing chain area).
Mark the timing position of the old actuator using white paint or marker for reference.
Unbolt the old actuator (typically 2–3 bolts, 10–13mm socket) and carefully disconnect any hydraulic lines or connectors.
Clean the mounting surface thoroughly with a lint-free cloth to remove any oil residue.
Install the new actuator in the same orientation, align timing marks, and hand-thread bolts first.
Torque bolts to spec (typically 20–25 Nm; see enclosed instructions for your engine variant).
Reconnect any hydraulic lines or electrical connectors and ensure no air pockets remain.
Reinstall engine cover and reconnect battery terminal.
Start engine and verify smooth idle; scan for fault codes if check engine light appears.
Note: This is a direct-bolt replacement. Professional installation is recommended if you're unfamiliar with timing systems. Incorrect cam timing can cause poor engine performance or damage. Always verify your part number against your VIN before installation.
Restore Precision Cam Timing
Don't let a worn VVT actuator compromise your 1.8 turbo's efficiency and responsiveness. This OEM-spec intake or exhaust camshaft sprocket actuator brings your M271 engine back to factory performance in one straightforward installation.
Shop Now
Apply discount code 22GET20 for 20% off any 2 items.
4.9★ 12,300+ verified reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL, FedEx, UPS shipping
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Daimler AG, Mercedes-Benz, Land Rover, or Jaguar Land Rover. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket replacement part designed for compatibility only. Always verify fitment with your vehicle's specific VIN and engine code before purchase.
2.7L 3.0L DIESEL 24x VALVE STEM SEALS FOR LAND ROVER RANGE ROVER 2002-09 DISCOVERY 3 RR SPORT 2005-09 2014 NEW DISCOVERY 1311285
£ 57.08
Victorious · Diesel Engines · Engine Parts
24× Diesel Valve Stem Seals – Range Rover & Discovery 2002–2017
OE-grade seals for 2.7L, 3.0L, and 3.6L diesel engines. Direct fit replacement (1311285) – eliminate oil consumption and valve train wear.
2002–2017
Diesel 2.7L / 3.0L / 3.6L
24 Piece Set
Oil Seals
OEM Part 1311285
Overview
If you own a Range Rover (2002–2009), Discovery 3 (2005–2009), Range Rover Sport (2005–2009 or 2014+), or Discovery 5 (2017+) fitted with a diesel powerplant, you know how critical engine integrity is. Worn valve stem seals are a silent killer—they let oil past the valve guides into the combustion chamber, causing blue smoke, rough idle, and catastrophic carbon buildup.
This 24-piece set of direct-fit diesel valve stem seals (OEM part 1311285) restores tight valve train clearance across all intake and exhaust ports. Whether your engine is 2.7L V6, 3.0L 24V, or 3.6L V8, these seals meet or exceed OE specifications for durability and oil retention.
Proper valve stem seals are non-negotiable for long-term diesel reliability. Replace them during major service intervals or whenever you're inside the head. The 6-month manufacturer warranty and our 30-day money-back guarantee mean you can buy with complete confidence.
What's Included
🔧
24× Valve Stem Seals
Full set for intake & exhaust valves
✓
OEM Part 1311285
Direct replacement, OE-grade metal construction
📦
Secure Packaging
Industrial-spec sealing to prevent damage in transit
📋
Installation Guide
Reference images for correct orientation & fitment
Product Highlights
OEM-specification metal valve stem seal for all 24 positions
Stops oil blow-by and excessive valve train wear
Fits 2.7L V6, 3.0L 24V, and 3.6L V8 diesel engines
Direct-fit replacement – no modification or adapters required
Restores engine compression and reduces harmful emissions
6-month manufacturer warranty included
Stable performance across full RPM range and load conditions
Engineered to Land Rover OE tolerances (±0.05mm)
Fast installation during routine cylinder head service
Tested for oil retention across hot & cold running cycles
Compatibility
Vehicle
Year Range
Engine
Fitment
Range Rover Vogue
2002–2009
3.6L V8 Diesel
Direct Fit
Discovery 3 (LR3)
2005–2009
2.7L V6 Diesel
Direct Fit
Range Rover Sport
2005–2009
2.7L V6 Diesel
Direct Fit
Range Rover Sport
2014+
3.0L 24V Diesel
Direct Fit
Discovery 5
2017+
3.0L 24V Diesel
Direct Fit
Petrol / Gasoline Engines
Any Year
All Petrol
Not Compatible
Before ordering: Confirm your engine displacement and fuel type. This set is for diesel engines only. Petrol models require different seals. When in doubt, check your VIN or send us a photo of your engine bay—our team at +44 203 943 9919 can verify fitment instantly.
Installation Notes
Difficulty: Intermediate | Time: 4–6 hours (cylinder head removal required)
Remove cylinder head. Drain coolant, remove intake & exhaust manifolds, unbolt head from block, and lift clear.
Inspect valve guides. Check guides for wear or scoring. If damaged, have professionally reamed or replace before installing new seals.
Remove old seals. Use a seal removal tool or gentle pliers to extract the worn seals without damaging the guide bores.
Clean valve guide openings. Wipe all carbon and debris from the bore with a dry, lint-free cloth. Seals must sit in a clean recess.
Install new seals. Press each seal squarely onto the valve guide using a seal driver tool (matching the guide diameter). Do not hammer or over-force—seals should slide on smoothly and seat with hand pressure.
Verify seating. Confirm all 24 seals are fully seated and sit flush with the guide boss. Any proud or recessed seal can cause oil bypass.
Reassemble cylinder head. Torque head bolts to OE spec (typically 65–75 Nm in sequence), reinstall manifolds, refill coolant, and bleed air from the cooling system.
Test drive and monitor. Check for blue smoke at idle or under load for the first 50 miles. A small amount of white vapor is normal; persistent blue indicates a seal issue.
Critical: Always use a proper seal driver tool. Hammer installation risks seal damage and will result in immediate oil leaks or blow-by. If you lack a seal driver, rent or buy one (typically £15–30 GBP)—it's cheaper than a warranty claim.
Ready to Restore Valve Train Health?
Stop oil consumption and excessive wear with OE-grade diesel valve stem seals. Direct-fit design, 24-piece set, backed by a 6-month warranty and our industry-leading 30-day money-back guarantee.
Add to Cart
Apply code 22GET20 for 20% off any 2 items. Free worldwide DHL shipping on orders over £50.
★★★★★ 4.9/5 – 12,300+ verified reviews
📞 +44 203 943 9919 – Mon–Fri 9am–7pm
✓ 30-day money-back guarantee
🌍 Worldwide DHL, FedEx, UPS, TNT
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM. All trademarks and vehicle names are the property of their respective manufacturers. This product is an aftermarket replacement part meeting OE specifications.
WATER HEATER HOSE FOR 3.0T 5.0L 5.0T LAND ROVER RANGE ROVER 2013- RANGE ROVER SPORT 2014- ALL NEW DISCOVERY V L462 2017 LR034597
£ 65.91
```html
Victorious · Range Rover / Sport / Discovery · Engine Cooling
Water Heater Hose for Range Rover, Range Rover Sport & Discovery 5
OE-specification cooling circuit replacement for 3.0T, 5.0L, and 5.0T engines—engineered for reliability and precise fitment.
LR034597
2013–2020 Range Rover
2014–2020 Sport
2017–Present Discovery 5
Petrol & Diesel
Direct Fit
Overview
Whether you're piloting a classic Range Rover L405, the athletically refined Range Rover Sport L494, or the versatile Discovery 5 L462, your engine's cooling system is mission-critical. The water heater hose—a small but essential component—circulates coolant through your cabin heater and engine warming circuits, maintaining optimal thermal management under every condition.
This replacement hose meets OE specification (part number LR034597) and is engineered to handle the demands of Land Rover's most popular powerplants: the 3.0-litre supercharged petrol, the 5.0-litre supercharged V8, and diesel variants. Over time, original hoses can degrade due to heat cycles and pressure, leading to coolant leaks, air pockets, and loss of cabin heat—problems you'll notice first on a Scottish winter morning.
Our water heater hose restores OE reliability without compromise. It's a direct bolt-on replacement that requires no modification, no special tools, and integrates seamlessly with your existing cooling system. Installation takes under an hour for a competent DIY enthusiast, or your preferred technician can fit it in under thirty minutes flat.
What's Included
🔧
Water Heater Hose (1x)
OE LR034597 specification
📋
Fitment Guide
Vehicle-specific installation notes
✓
30-Day Money-Back Guarantee
Hassle-free if not satisfied
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT
Product Highlights
OE-specification part number LR034597 for direct fit compatibility
Engineered for 3.0T, 5.0L, and 5.0T petrol and diesel engines
Temperature-rated for sustained high-pressure operation
Precision-molded connectors eliminate leaks and air pockets
Drop-in replacement—no modifications or adapters needed
Restores full cabin heating performance and engine thermal balance
Tested across Range Rover L405, Sport L494, and Discovery 5 L462 platforms
Professional-grade construction with factory-grade durability
Fits both left-hand and right-hand drive configurations
Stock item—ships within 48 hours worldwide
Compatibility Matrix
Vehicle
Model Code
Year Range
Engine
Fitment
Range Rover
L405
2013–2020
3.0T, 5.0L Petrol
Direct Fit
Range Rover
L405
2013–2020
5.0T Diesel
Direct Fit
Range Rover Sport
L494
2014–2020
3.0T, 5.0L Petrol
Direct Fit
Range Rover Sport
L494
2014–2020
5.0T Diesel
Direct Fit
Discovery 5
L462
2017–Present
3.0T, 5.0L Petrol
Direct Fit
Discovery 5
L462
2017–Present
5.0T Diesel
Direct Fit
Range Rover Sport
L320
2005–2013
Any
Not Compatible
Range Rover Evoque
L551
2019–Present
Any
Not Compatible
Before purchase: Verify your vehicle's model code and engine variant against the table above. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) or send us your VIN for instant confirmation.
Installation Notes
Difficulty Level: Intermediate
Estimated Time: 45–75 minutes (DIY) | 20–30 minutes (technician)
Tools Required: Basic socket set, screwdrivers, hose clamp tool (or pliers), coolant catch pan, jack and jack stands (if underbody access needed)
Steps
Safety First: Engine must be completely cold. Disconnect the negative battery terminal. Allow the engine bay to cool for at least 30 minutes if the vehicle was recently run.
Drain Coolant: Position a drain pan beneath the radiator petcock (lower right side of radiator). Open the petcock valve and allow coolant to drain fully. Dispose of used coolant responsibly.
Locate the Heater Hose: The water heater hose connects the engine water pump or thermostat housing to the heater core inlet. It runs along the driver's side firewall or beneath the intake manifold depending on your engine variant. Reference your fitment guide for exact routing.
Remove Hose Clamps: Using a hose clamp tool or adjustable pliers, carefully loosen and remove the hose clamps at both ends. Mark clamp positions with tape if they're to be reused.
Disconnect the Old Hose: Gently wiggle and twist the old hose to break the connection seal. Some coolant may remain—have your drain pan ready. Do not force—take time to avoid damaging connector ports.
Inspect Connection Points: Examine the heater core inlet and water pump outlet. Remove any debris or corrosion with a soft cloth. Dried coolant deposits can be gently cleaned with distilled water.
Install the New Hose: Position the replacement hose and ensure it routes cleanly without kinks or contact with moving parts (serpentine belt, alternator, etc.). Push connections firmly onto their ports until you feel a solid seating click.
Reinstall Hose Clamps: Slide clamps over each connection point and tighten in a cross pattern (don't over-tighten; hand-tight plus a quarter turn is sufficient). Excessive clamp torque can crush the hose and create future leaks.
Refill Coolant: Close the radiator petcock. Fill the radiator and expansion tank with fresh OE-specification coolant (Land Rover coolant concentrate mixed to proper ratio, typically 50:50 with distilled water). Do not use tap water—mineral content causes scaling.
Bleed Air: Start the engine and allow it to idle until the thermostat opens and coolant circulates. Carefully open the radiator cap and top up if needed. Rev gently to 2000 rpm for 30 seconds, then let the engine settle. Check the level again and top up as necessary.
Check for Leaks: Allow the engine to run at normal operating temperature for 10 minutes. Inspect both hose connections under the engine bay for any seepage. If a leak appears, immediately shut down and inspect the clamp and connection.
Reconnect Battery & Test: Reconnect the negative battery terminal. Drive the vehicle for 15 minutes at gentle speed to verify cabin heater function, coolant temperature stability, and the absence of warning lights on the dash.
⚠ Important: Do not operate the vehicle with a damaged or missing water heater hose. A ruptured hose will cause rapid coolant loss, engine overheating, and potential thermal damage. If you encounter difficulty during installation, stop immediately and consult a qualified technician. Land Rover engines require precise coolant balancing—improper installation can lead to air locks and erratic heating.
Why Victorious?
We're a specialist in Land Rover and Range Rover parts and accessories. Our team knows these vehicles inside and out—we drive them, modify them, and support owners who demand excellence. This water heater hose is sourced from OE-equivalent manufacturers and tested for fitment across all listed platforms. We don't stock half-measures, and we don't sell you compromises.
Every product ships with our 30-day money-back guarantee. If it doesn't fit perfectly or meet your expectations, we'll make it right—no questions asked.
Ready to Restore Your Cooling System?
Order your water heater hose now and enjoy seamless cabin heating and engine thermal control. Fast worldwide shipping, expert support, and a guarantee you can trust.
Shop Now
Use code 22GET20 for 20% off any 2 items
⭐ 4.9 / 5 Stars – 12,300+ verified reviews
🚚 Worldwide Shipping – DHL, FedEx, UPS, TNT
📞 Expert Support – +44 203 943 9919
✓ 30-Day Guarantee – Money-back if not satisfied
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover plc, or any official franchise. All vehicle names, badges, and model designations are the property of their respective manufacturers. This product is manufactured to OE specification and tested for compatibility but is not an official OEM part. Installation of this product does not void your vehicle's manufacturer warranty, but we recommend consulting your local Land Rover dealer if your vehicle is under active warranty coverage. Use at your own risk. Always follow proper safety procedures when working on your vehicle's cooling system.
```
PCV VALVE SERVICE KIT OF VALVE COVER LR023777 REPAIR KIT FOR 3.2L PETROL LAND ROVER FREELANDER LR2 VOLVO XC60 XC70 XC90 S80 V70
£ 49.91
Victorious Automotive · Land Rover · Engine Parts
PCV Valve Service Kit – LR023777 Repair Kit for Land Rover Freelander LR2 & Volvo 3.2L Petrol
Complete crankcase ventilation service kit engineered to restore engine breathing efficiency and prevent oil sludge accumulation in your 3.2L petrol engine.
Land Rover Freelander LR2
Volvo XC60 · XC70 · XC90
OE Quality Replacement
3.2L Petrol Engine
LR023777 · 31319642
Overview
The Land Rover Freelander LR2 and compatible Volvo models with 3.2L petrol engines rely on the positive crankcase ventilation (PCV) system to manage internal engine pressure and emissions. The valve cover housing and PCV valve assembly are critical components that, when worn or degraded, lead to rough idling, increased blow-by pressure, and accelerated engine wear.
This premium PCV valve service kit includes everything needed to refresh your valve cover crankcase ventilation system. Engineered to OE specifications and direct-fit to Land Rover and Volvo applications, each kit contains precision-matched components that restore factory breathing performance without modification or additional tuning.
Whether you're addressing a faulty PCV valve, cleaning carbon buildup, or performing preventative maintenance, this service kit delivers the reliability and durability that Freelander and Volvo owners expect from a premium repair solution.
What's Included
⚙️
PCV Valve Service Kit (×2)
Complete valve and gasket assembly set for dual installation
🔧
Valve Cover Seals & Gaskets
OE-quality sealing components to prevent crankcase leaks
📋
Installation Guide
Step-by-step instructions for safe, proper valve replacement
✓
Quality Assurance
Each component tested for leak-free performance before shipment
Key Highlights
Direct replacement for LR023777 and 31319642 factory components
OE-specification engineering ensures factory-matched performance
Restores proper crankcase pressure regulation and emissions control
Reduces oil sludge buildup and extends engine life
Comprehensive seal and gasket kit prevents post-repair leaks
Compatible with 3.2L petrol engines across multiple Volvo platforms
Fast, efficient installation—no custom modification required
Perfect for preventative maintenance or damage repair
Backed by rigorous quality control and pressure testing
Trusted by Land Rover and Volvo specialists worldwide
Compatibility Chart
Vehicle
Engine
Years
Fit Status
Land Rover Freelander LR2
3.2L Petrol
2006–2014
Direct Fit
Volvo XC60
3.2L Petrol
2008–2016
Direct Fit
Volvo XC70
3.2L Petrol
2007–2016
Direct Fit
Volvo XC90
3.2L Petrol
2003–2014
Direct Fit
Volvo S80
3.2L Petrol
2006–2016
Direct Fit
Volvo V70
3.2L Petrol
2007–2016
Direct Fit
Always verify your vehicle's VIN and engine code before ordering. Contact our specialists at +44 203 943 9919 for fitment confirmation.
Installation Guide
Difficulty Level: Intermediate | Time: 1.5–2.5 hours
Prepare the engine: Allow the engine to cool to ambient temperature. Disconnect the negative battery terminal to prevent accidental electrical discharge during service.
Remove the valve cover: Unbolt the intake manifold cover and remove the top engine cover to access the valve cover assembly. Document bolt positions for reinstallation.
Drain residual oil: Place a drain pan beneath the valve cover. Carefully remove the old PCV valve and allow any trapped oil to drain completely.
Clean the valve cover mating surface: Use a gasket scraper and degreaser to remove all old sealant, carbon buildup, and debris from the valve cover housing. Wipe clean with a lint-free cloth.
Install new gasket and seals: Position the new gasket set from the kit onto the valve cover mating surface. Ensure the PCV valve opening is properly aligned with the service kit components.
Insert the new PCV valve: Carefully install the new PCV valve assembly into the valve cover, ensuring it seats firmly and securely. Verify no gaps or misalignment.
Reinstall the valve cover: Place the updated valve cover assembly back onto the engine block. Tighten fasteners in a star pattern to the OE torque specification (typically 8–10 Nm). Do not over-tighten.
Reconnect systems: Reattach all hoses, connectors, and intake manifold covers. Verify all connections are secure and properly routed.
Test and verify: Reconnect the negative battery terminal. Start the engine and listen for abnormal sounds. Check for oil leaks around the valve cover and PCV connections for 10 minutes of idle operation.
⚠️ Important: Do not operate the engine if any component feels loose or if oil leakage is detected. Allow the engine to cool completely before tightening fasteners further. Improper installation may result in crankcase pressure buildup, which can damage seals and gaskets.
Ready to Restore Engine Breathing?
Revive your Freelander LR2 or Volvo 3.2L petrol engine with this premium PCV valve service kit. Direct-fit engineering, OE quality, and full system sealing—everything you need for a confident, leak-free installation.
Shop PCV Valve Kits
Use code 22GET20 for 20% off any 2 items
✓ 30-day money-back guarantee
✓ Worldwide DHL shipping
✓ 4.9★ rated by 12,300+ owners
✓ UK phone support: +44 203 943 9919
Disclaimer: Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar, Defender, Volvo, or Jaguar Land Rover plc. All vehicle names and part numbers are referenced for compatibility identification only. Product descriptions, specifications, and fitment information are provided in good faith and subject to change without notice. Always verify compatibility with your specific vehicle before purchase. Victorious Automotive accepts no liability for incorrect fitment or installation damage resulting from user error.
2.0L ENGINE ACCESSORY DRIVE BELT FOR LAND ROVER RANGE ROVER EVOQUE VELAR NEW DISCOVERY SPORT JAGUAR T2H59849 LR071742 LR079263
from £ 49.38
Victorious · Engine Parts · Accessory Drive Belt
2.0L Engine Accessory Drive Belt – Discovery Sport · Range Rover Evoque · Velar · Jaguar XE/XF
Premium replacement serpentine belt engineered for Land Rover 2.0L turbo engines. Direct OEM fit with 12-month guarantee.
Discovery Sport 2015–2019
Range Rover Evoque 2016–2019
Velar 2018–2022
Jaguar XE/XF/E-PACE/F-PACE
2.0L Engines
OEM Equivalent
Overview
If you own a Land Rover Discovery Sport, Range Rover Evoque, Velar, or Jaguar with a 2.0L turbocharged engine, your accessory drive belt is critical to engine health. This serpentine belt drives the alternator, power steering pump, water pump, and air conditioning compressor. A worn or failed belt can leave you stranded and risks catastrophic engine damage.
This OEM-equivalent replacement belt is engineered to exact Land Rover specifications for seamless, direct fitment. Whether your factory belt is cracking, glazing, or approaching the 60,000–100,000 km service window, this is the reliable upgrade trusted by Land Rover specialists worldwide.
Available in single-belt or dual-belt packs for complete peace of mind. Backed by a 12-month warranty and 30-day money-back guarantee from Victorious Automotive.
What's Included
⚙️
Accessory Drive Belt (Single)
OEM-specification serpentine belt
✓
Premium Quality
Partsmost aftermarket – OE standard
📋
Part Number Verification
LR071742, LR079263, T2H59849, T2R21156
🛡️
12-Month Warranty
Full coverage from Victorious Automotive
Product Highlights
Direct OEM fit – no modifications needed
Engineered to Land Rover 2.0L specifications
Drives alternator, power steering, water pump & AC compressor
Replaces worn, cracked, or glazed belts instantly
Perfect match with original equipment
Stable performance with high reliability
Easy installation for technicians or DIY enthusiasts
Available in single or dual-pack options
DAYCO 6K1934/6K1935 equivalent quality
12-month warranty + 30-day money-back guarantee
Compatibility
Vehicle / Model
Year Range
Engine
Status
Land Rover Discovery Sport
2015–2019
2.0L Diesel / Petrol
Direct Fit
Range Rover Evoque (L538/L551)
2016–2019
2.0L Turbocharged
Direct Fit
Range Rover Sport (L494)
2016–2020
2.0L Turbocharged
Direct Fit
Land Rover Range Rover Velar
2018–2022
2.0L Turbocharged
Direct Fit
Land Rover Discovery 5 (L462)
2017–2024
2.0L Engines
Direct Fit
Jaguar XE / XF
2016–2018
2.0L Turbocharged
Direct Fit
Jaguar E-PACE / F-PACE
2017–2018
2.0L Turbocharged
Direct Fit
Other 2.0L turbo models (pre-2015)
Before 2015
N/A
Verify VIN
Not sure if this fits your vehicle? Contact us with your VIN or current belt part number. Unsure which option to order (single or dual pack)? Our specialists at +44 203 943 9919 (Mon–Fri 9am–7pm) will confirm fitment instantly.
Installation Notes
Difficulty Level: Intermediate | Time Required: 45–90 minutes
Disconnect battery negative terminal and wait 5 minutes for residual power to discharge.
Remove plastic engine cover (if fitted) and note the belt routing diagram on the underside.
Locate the serpentine belt tensioner (usually on the right side of the engine bay). Rotate it counter-clockwise using an appropriate hex socket or wrench to release tension.
Slip off the old belt carefully from all pulleys: crankshaft, alternator, power steering pump, water pump, and air conditioning compressor.
Inspect all pulley surfaces for cracks, fraying, or contamination. Clean with a dry cloth if necessary.
Route the new belt following the routing diagram exactly. Start at the crankshaft pulley and work systematically around the engine.
Rotate the tensioner counter-clockwise to create slack, then slip the belt onto the final pulley (typically the idler or alternator).
Release the tensioner slowly and verify the belt is centered on all pulleys and seated fully in each groove.
Reconnect the battery negative terminal and start the engine. Listen for any squealing or unusual noise for 30 seconds, then shut down.
Run the engine under light load (gentle acceleration) for 5–10 minutes to allow the belt to bed in.
⚠️ Important: Do not over-tension the belt. Excessive tension causes premature wear on bearings and can crack the tensioner. If you hear persistent squealing after installation, the belt may be under-tensioned. The tensioner spring should maintain correct tension automatically; never manually force additional pressure.
Why Victorious Automotive
12-month warranty on all engine parts
30-day money-back guarantee – no questions asked
OEM-equivalent quality, aftermarket pricing
Ships worldwide via DHL, FedEx, UPS, TNT
Verified by 12,300+ Land Rover and Range Rover owners
Expert phone support: +44 203 943 9919
Exclusive bulk discount code: 22GET20 – 20% off any 2 items
Specialists in British automotive since 2013
Ready to Restore Engine Performance?
Don't wait for belt failure to strike. Preventive replacement keeps your Land Rover, Range Rover, or Jaguar running reliably for another 100,000 km. Order your OEM-equivalent accessory drive belt today and enjoy free worldwide shipping.
Shop Now – Add to Cart
Use code 22GET20 at checkout for 20% off when you buy 2 or more items from any collection.
⭐ 4.9/5 stars – 12,300+ verified reviews
🚚 Free worldwide shipping – DHL, FedEx, UPS
✅ 30-day money-back – no hassle returns
📞 Expert support – +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover, Land Rover, Range Rover, Jaguar, or Tata Motors. All vehicle names, logos, and trademarks are the property of their respective manufacturers and are used solely for identification and compatibility reference. This product is designed to fit the listed vehicles but is not an original equipment manufacturer (OEM) part. Always verify fitment with your vehicle VIN before purchase.
2.7 V6 3.0 DIESEL OEM INA FRONT TIMING BELT IDLER PULLEY FOR LAND ROVER DISCOVERY 3 4 RANGE ROVER RR SPORT VELAR JD61536 1311306
£ 138.61
```html
Victorious · Engine Parts · Land Rover / Jaguar
OEM INA Front Timing Belt Idler Pulley – Discovery 3 & 4 / Range Rover Sport / Velar
Factory-spec idler pulley for 2.7L V6 and 3.0L diesel engines. Direct OEM fit, 12-month warranty, ships worldwide.
Discovery 3 & 4
Range Rover Sport
2.7 V6 Diesel
3.0 Diesel 24V
OEM INA
Set of 2
Direct Fit
Overview
The Discovery 3 & 4 and Range Rover Sport (L320/L494) rely on precision timing belt components to maintain engine synchronisation and durability. The front idler pulley is critical—it guides the timing belt under constant tension and thermal stress, especially in diesel engines running higher compression ratios.
This OEM-specification INA idler pulley is engineered to original Land Rover and Jaguar factory tolerances. It's the exact replacement for engines with part number 1311306 (Land Rover) or INA 5320461100. Also fits Jaguar S-Type, XJ, XF, and F-Pace with compatible diesel engines.
Two units are included in this set—both front idlers are typically replaced together as preventative maintenance during timing belt service. Sourced from Partsmost with verified OEM credentials and a 12-month manufacturer guarantee.
What's Included
⚙️
2x Front Timing Idler Pulleys
OEM INA 5320461100 specification
📋
OEM Part Numbers
JD61536 / 1311306 verification
🛡️
12-Month Warranty
Full manufacturer coverage
📦
Factory Packaging
New / unused condition
Product Highlights
OEM-Grade Metal Construction: Precision-engineered steel and bearing materials to original spec.
Direct Replacement: Fits 2.7L V6 and 3.0L diesel engines without adaptation.
Set of 2 Units: Both front pulleys included for complete timing belt service.
Discovery 3 & 4 Compatible: 2005–2009 LR3/LR4, 2017+ all-new Discovery.
Range Rover Sport Fit: 2005–2009 L320 and 2014+ L494 models.
Jaguar XJ / XF / F-Pace: Compatible with 2.7 V6 and 3.0 diesel powerplants.
Verified Cross-References: DAYCO D-ATB1011 H50 / NTN equivalent.
Fast Worldwide Shipping: DHL, FedEx, UPS, TNT—tracking included.
Tension & Bearing Integrity: Pre-tested for runout and bearing play.
12-Month Guarantee: Full replacement coverage if defective.
Compatibility Chart
Vehicle / Engine
Years
Status
Discovery 3 (LR3) · 2.7 V6 Diesel
2005–2009
Direct Fit
Discovery 4 (LR4) · 2.7 V6 Diesel
2005–2009
Direct Fit
Range Rover Sport L320 · 2.7 V6 Diesel
2005–2009
Direct Fit
Range Rover Sport L494 · 3.0 Diesel 24V
2014–Present
Direct Fit
Discovery 5 (L462) · 3.0 Diesel 24V
2017–Present
Direct Fit
Range Rover Velar · 3.0 Diesel
2018–2022
Direct Fit
Jaguar S-Type · 2.7 V6 Diesel
1999–2008
Direct Fit
Jaguar XJ · 2.7 V6 Diesel
2003–2009
Direct Fit
Jaguar XF · 2.7 V6 Diesel
2009–2015
Direct Fit
Jaguar XF · 3.0 Diesel
2016–Present
Direct Fit
Jaguar F-Pace · 3.0 Diesel
2016–Present
Direct Fit
Other Land Rover / Jaguar models
—
Verify VIN
⚠️ Always verify your vehicle's VIN or original part number before ordering. Contact us at +44 203 943 9919 if unsure.
Installation Notes
Difficulty: Intermediate | Time: 2–4 hours (both pulleys)
Drain and disconnect: Relieve engine pressure, disconnect battery, remove auxiliary components to access timing cover.
Remove cover bolts: Unbolt and carefully lift timing cover. Note gasket condition for reuse or replacement.
Locate idler pulleys: Front idlers are positioned along the timing belt run. Mark belt direction with tape or marker.
Unbolt old pulleys: Use appropriately-sized socket or wrench. Pulleys may be tight; apply penetrant if needed.
Install new pulleys: Fit new OEM units into mounting brackets. Align bearing bores and hand-tighten bolts first.
Torque to spec: Tighten to Land Rover / Jaguar factory specification (typically 18–24 Nm for idler pivot bolts). Do not over-torque.
Tension check: Verify belt tension with a tension gauge (if equipped) or by the deflection method per manual.
Reassemble: Replace gasket or O-ring, reinstall timing cover, bolt down, and reconnect battery and accessories.
Start and test: Run engine at idle, listen for abnormal noise, check for leaks. Road test at low speed before full use.
Critical: This is a precision engine component. If you lack experience with timing belt service, consult a qualified Land Rover or Jaguar specialist. Incorrect installation can cause catastrophic engine damage.
Ready to Service Your Timing Belt?
OEM-spec idler pulleys, fast worldwide shipping, and a 12-month guarantee. One set covers both front pulleys—everything you need for a complete, reliable job.
Shop Timing Components
Use code 22GET20 for 20% off any 2 items.
⭐ 4.9/5 · 12,300+ reviews
🌍 Worldwide · DHL, FedEx, UPS, TNT
✅ 30-day money-back guarantee
📞 +44 203 943 9919 · Mon–Fri 9am–7pm
Disclaimer: Victorious Automotive is an independent specialist in Land Rover, Range Rover, and Jaguar accessories and engine components. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, the Land Rover brand, or INA / Schaeffler AG. All product names, logos, and brands mentioned are the property of their respective owners. Part numbers and technical specifications are provided for compatibility reference only. Always verify fitment before purchase.
```
1.5 I3 2.0 3.0 I6 PETROL 16x VALVE STEM SEAL FOR LAND ROVER RANGE ROVER SPORT 14- NEW DISCOVERY SPORT VELAR EVOQUE 19- LR116489
from £ 37.16
Victorious · Engine Components · Petrol Engines
Valve Stem Seal Kit – 16x OE-Spec Petrol Seals
Factory-grade valve stem seals for Land Rover petrol engines. Direct-fit set of 16 seals for 1.5L I3, 2.0L, and 3.0L I6 engines.
LR116489
Petrol Engines
16-Piece Set
OE Quality
Direct Fit
Overview
If you drive a Range Rover Sport, Discovery Sport, Discovery, Range Rover Velar, or Range Rover Evoque with a petrol engine, you know performance and reliability matter. Valve stem seals are critical — they regulate oil flow to the valve guides, preventing oil burn and maintaining compression. When they wear, you'll notice blue smoke on cold starts, increased oil consumption, and a rough idle.
This OE-specification valve stem seal kit contains 16 seals (a complete set for most petrol engines) and matches Land Rover part number LR116489. Whether your 1.5L I3, 2.0L, or 3.0L I6 engine is factory or rebuilt, these seals restore proper valve guide lubrication and combustion chamber sealing.
Manufactured to strict OE standards and tested for durability under operating temperatures, they're an essential refresh for any engine rebuild or high-mileage maintenance. Fits 2014–2019+ petrol models across the Range Rover and Discovery lineup.
What's Included
🔩
16x Valve Stem Seals
Complete set for petrol engines
✅
OE Part Number
LR116489 certified
📋
Fitment Guide
Compatibility reference included
🛡️
30-Day Guarantee
Money-back if not satisfied
Key Features
Direct replacement for OEM LR116489
Fits 1.5L I3, 2.0L, and 3.0L I6 petrol engines
Complete 16-seal set for most builds
OE-grade elastomer material
Tested for operating range and thermal stability
Prevents oil burn and reduces blue smoke
Maintains valve guide lubrication
Supports engine performance and compression
Suitable for rebuild and high-mileage applications
6-month manufacturer warranty
Compatibility Chart
Vehicle Model
Engine
Year Range
Fit Status
Range Rover Sport
2.0L Petrol
2014–2024
Direct Fit
Discovery Sport L550
2.0L Petrol
2015–2024
Direct Fit
Discovery 5
3.0L I6 Petrol
2017–2024
Direct Fit
Range Rover Velar
3.0L I6 Petrol
2017–2024
Direct Fit
Range Rover Evoque L551
1.5L I3 Petrol
2019–2024
Direct Fit
Range Rover Evoque L538
2.0L Petrol
2011–2018
Check Model Year
Discovery 3/4
Diesel Engines
2004–2016
Not Compatible
Note: These seals are designed for petrol engines only. For diesel models or if you're unsure of your engine code, contact our team at +44 203 943 9919 with your VIN or engine code for verification.
Installation Notes
Professional Engine Work Required
Valve stem seal replacement requires cylinder head removal and valve guide access. This is not a bolt-on job and should only be performed by a qualified technician or during a full engine rebuild.
Remove cylinder head — Follow manufacturer torque sequence and procedures
Remove valves and springs — Use a valve spring compressor tool
Extract old seals — Push or pry from valve guide tops carefully
Clean valve guides — Ensure guides are free of carbon and debris
Install new seals — Press OE seals onto guides using a dedicated seal installer tool (prevents damage)
Reinstall valves and springs — Confirm proper seating and spring tension
Reassemble and test — Torque head bolts to spec; run compression and leak-down tests
⚠️ Warning: Always work on a clean bench. Do not force seals onto guides — they should slide smoothly when using the correct installer. Cross-threading or forcing can damage the guide and ruin the seal.
Ready to Refresh Your Engine?
OE-grade valve stem seals are the foundation of a strong rebuild. Whether you're servicing a high-mileage Range Rover or finishing an engine refresh, these LR116489-certified seals deliver the durability and precision your Land Rover deserves.
Shop Valve Stem Seals
Use code 22GET20 for 20% off any 2 items from our engine parts range.
4.9★ 12,300+ verified reviews
🌍 Worldwide shipping via DHL & FedEx
🛡️ 30-day money-back guarantee
📞 +44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product references are for fitment purposes only. Always verify compatibility with your vehicle before purchase. Warranty covers manufacturing defects only and does not apply to damage from improper installation, use, or storage.
5.0L SC V8 PETROL V-RIBBED PRIMARY OR SECONDARY DRIVE BELT FOR LAND ROVER RANGE ROVER 2013- RR SPORT 2014- LR035542 / LR011327
from £ 49.38
```html
Victorious · Range Rover · Engine Parts
5.0L SC V8 Petrol V-Ribbed Drive Belt
OEM-spec serpentine belt for Range Rover 2013+ and Range Rover Sport 2014+ — ensure consistent engine accessory drive and long-term reliability.
Range Rover L405
Range Rover Sport L494
2013–2020
5.0L Supercharged
Primary & Secondary
Overview
The Range Rover and Range Rover Sport 5.0L Supercharged V8 demands engineered components throughout its drivetrain. Your serpentine belt—primary or secondary—drives the alternator, water pump, and air conditioning compressor in a single continuous circuit. When original spec performance matters, this OEM-equivalent V-ribbed belt delivers the tension, durability, and grip your supercharged engine expects.
Victorious supplies both Primary (LR035542) and Secondary (LR011327) variants, ensuring you can replace either belt with confidence. These belts meet Land Rover's original material and ribbed-profile specifications, so alignment and serpentine routing are guaranteed from day one.
Worn or slipping belts cause alternator output loss, coolant temperature spike, and compressor whine—warnings no Range Rover owner should ignore. A proactive belt swap keeps your premium vehicle running silently and reliably.
What's Included
🔧
Drive Belt (Choice of Type)
Primary LR035542 or Secondary LR011327 — select your variant at checkout
Product Highlights
OEM-spec V-ribbed construction for precise serpentine engagement
Rated for 5.0L SC V8 Supercharged powertrains (all temps)
Direct fit: LR035542 (primary) or LR011327 (secondary)
Aftermarket brand quality at competitive pricing
Stable performance and high reliability in harsh UK/EU climates
Easy installation — no special tools required
Available individually or in matched dual-belt sets
12-month parts warranty included
Factory alignment and routing pre-engineered
Sourced from leading automotive belt specialist
Compatibility
Vehicle
Engine
Years
Primary
Secondary
Range Rover Vogue
5.0L SC V8
2013–2020
LR035542
LR011327
Range Rover Sport
5.0L SC V8
2014–2020
LR035542
LR011327
Range Rover Vogue
5.0L SC V8
2010–2012
Not Primary
LR011327
Range Rover Sport
5.0L SC V8
2010–2013
Not Primary
LR011327
Discovery 4 / LR4
3.0L SC V6
2009–2016
Not Compatible
LR011327
Note: Always verify your vehicle's part number (stamped on engine bay label) or contact our team with your VIN before purchase.
Installation
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect battery negative terminal and allow engine to cool completely.
Locate the tensioner bolt on the serpentine belt path (typically bottom right of the engine bay).
Rotate the tensioner clockwise (via bolt head or lever) to release belt tension and slide the old belt free.
Remove the worn belt carefully; inspect pulleys for cracks or glazing.
Position the new belt onto the crankshaft pulley first, then route around alternator, water pump, power steering pump, and air conditioning compressor (follow the serpentine diagram on the undertray or engine cover).
Rotate the tensioner clockwise again to maximum release and seat the belt fully onto all grooves.
Release the tensioner slowly; the spring will auto-tension the belt to factory spec.
Reconnect the battery and start the engine; listen for noise and confirm alternator output on the dash.
Allow to idle for 2 minutes and recheck tension (no visible slip or glazing on pulley edges).
⚠ Important: If the belt slips or whines after installation, the tensioner spring may be worn. Consult a Land Rover specialist or contact Victorious support before driving long distances. Ignoring a slipping belt risks alternator failure and engine overheating.
Ready to Refresh Your Engine?
A fresh serpentine belt is one of the easiest ways to restore smooth, silent engine accessory operation on your Range Rover. Don't let a worn belt become a roadside emergency.
Shop Drive Belts
Use code 22GET20 for 20% off any 2 items.
30-day money-back guarantee
4.9/5 verified reviews
12,300+ happy owners
📞 +44 203 943 9919
Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All references to vehicle names, part numbers, and specifications are for compatibility identification only. Land Rover is a registered trademark of Jaguar Land Rover Limited.
```
3.2L PETROL Si6 ENGINE OIL COOLER FOR LAND ROVER FREELANDER LR2 2006-2014 VOLVO XC90 S80 S60 V60 30757620 LR041257
£ 120.86
```html
Victorious · Engine Cooling · Engine Parts
Aluminium Engine Oil Cooler – Freelander LR2 & Volvo
OE-spec thermal management upgrade for 3.2L petrol Si6 engines. Direct-fit replacement with 1-year warranty.
LR2 2006–2014
Volvo XC90 / S80 / S60 / V60
Aluminium Construction
OE Quality Spec
Engine Cooling
Overview
If you own a Land Rover Freelander LR2 (2006–2014) with the 3.2L petrol Si6 engine, or select Volvo models (XC90, S80L, S80, S60, V60), you know that sustained engine performance depends on precise thermal management. Your oil cooler works silently in the background—until it doesn't. A compromised cooler leads to elevated oil temperatures, reduced lubrication viscosity, and accelerated wear on bearing surfaces and piston rings.
This is a direct OE-specification replacement cooler, engineered in aluminium for optimal heat dissipation and longevity. It's engineered to work seamlessly with your vehicle's existing coolant loop and oil circulation system. Built to Nissens 90826 standards, it restores factory cooling performance and protects your engine during high-load driving, towing, or sustained motorway runs.
We've sourced this as a Partsmost aftermarket component—the sensible choice for owners who demand quality without the OEM price tag. All parts arrive tested, with full compatibility documentation and our 30-day money-back guarantee.
What's Included
🔧
1× Engine Oil Cooler Assembly
Complete cooler unit with mounting brackets. Ready to install.
📋
Fitment Documentation
OEM part numbers, cross-reference guide, and technical specs included.
✓
1-Year Warranty
Full defect coverage. No hidden terms.
Product Highlights
Aluminium core construction for superior thermal conductivity and durability
OE-specification design—matches original equipment performance parameters
Direct-fit compatibility with Freelander LR2 and select Volvo platforms
Part numbers: LR001426, 30757620, Nissens 90826
Engineered for 3.2L Si6 petrol engines; 1600cc displacement variants
Easy installation—no modifications or custom fabrication required
Stable thermal performance under sustained high-load conditions
Aftermarket quality at a fraction of OEM pricing
Tested and verified before shipment
Backed by Victorious 30-day satisfaction guarantee
Compatibility Matrix
Vehicle Model
Year Range
Engine
Status
Land Rover Freelander LR2
2006–2014
3.2L Si6 Petrol
Direct Fit
Volvo XC90
2003–2014
3.2L Inline-6
Direct Fit
Volvo S80L
2006–2016
3.2L Inline-6
Direct Fit
Volvo S80
2007–2016
3.2L Inline-6
Direct Fit
Volvo S60
2011–2018
3.2L Inline-6
Direct Fit
Volvo V60
2010–2018
3.2L Inline-6
Direct Fit
⚠ Fitment Note: Always verify your engine displacement and model variant before purchase. We recommend cross-checking your VIN or existing oil cooler part number (LR001426, 30757620) with our team at +44 203 943 9919 if you're unsure. Some regional variants and turbocharged models may differ.
Installation Notes
Difficulty: Moderate | Time: 2–4 hours
Preparation: Disconnect negative battery terminal. Allow engine to cool fully for at least 2 hours. Raise vehicle safely on jack stands or a lift.
Drain Oil: Place drain pan beneath sump. Remove drain plug and allow oil to drain completely. Replace sump gasket as needed.
Access: Remove lower undertray and/or radiator shroud for cooler access (vehicle-specific). Some models require removal of the power steering reservoir.
Remove Old Cooler: Disconnect inlet and outlet hose clamps from the old cooler. Note hose orientation. Remove mounting bolts and lift out the cooler carefully.
Clean Mounting Surface: Wipe mounting bracket and engine block contact points with a clean lint-free cloth. Remove any old gasket material or corrosion.
Install New Cooler: Position the new cooler, align mounting holes, and hand-tighten bolts. Torque to 20–25 Nm (15–18 lb-ft) in a star pattern. Do not overtighten.
Reconnect Hoses: Attach inlet and outlet coolant hoses. Use new hose clamps (stainless steel, recommended). Torque clamp screws firmly but not aggressively.
Refill & Bleed: Add fresh coolant and engine oil to the prescribed levels. Start the engine and allow it to idle for 5–10 minutes. Check for leaks at all connections.
Final Check: Verify temperature gauge behaviour under a short test drive. Oil temperature should stabilize within normal range. Allow a further 30-minute soak before full-load operation.
⚠ Important: Do not run the engine without coolant. Dispose of old oil responsibly. If you are not confident in your mechanical ability, have this installation performed by a qualified technician. Improper installation can result in coolant or oil leaks, which may damage the engine.
Ready to Restore Your Engine Cooling?
A quality oil cooler is one of those critical maintenance items that pays dividends in reliability and longevity. This Partsmost cooler offers OE performance without the premium price—backed by our 30-day guarantee and a team that actually knows Land Rovers and Volvos.
Add to Cart
Use code 22GET20 for 20% off when you buy any 2 items.
✓
30-Day Money Back
✓
1-Year Warranty
✓
4.9★ Rated (12,300+ reviews)
✓
Free Worldwide Shipping
✓
Expert Support: +44 203 943 9919
Disclaimer: Victorious Automotive is an independent aftermarket retailer. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover plc, Volvo Cars, or any OEM manufacturer. Product names, logos, and brands are the property of their respective owners. This product is a replacement/upgrade component compatible with the stated vehicle models and is sold for aftermarket use only.
```
3.0L V6 Drive Belt Idler pulley Tensioner for Land Rover Discovery 4 Range Rover 2013- RR Sport 2014- LR051263 LR035544 LR035546
from £ 49.38
```html
Victorious · Engine Parts · Land Rover
3.0L V6 Drive Belt Idler Pulley Tensioner Kit – Discovery 4 / Range Rover / Range Rover Sport
OEM-quality serpentine belt system components engineered for direct fitment and proven reliability across your Land Rover engine bay.
Discovery 4 (LR4)
Range Rover L405
Range Rover Sport L494
2010–2016
3.0L V6 Petrol
OEM Quality
Belt Kit Available
Overview
Your Discovery 4, Range Rover (L405), or Range Rover Sport (L494) with a 3.0L V6 petrol engine relies on a finely-tuned serpentine belt system to distribute power from the crankshaft to alternator, water pump, and air-conditioning compressor. Over time—especially after 80,000+ miles—belt tension degradation and pulley wear compound into loss of charging voltage, cooling efficiency, and component lifespan.
This OEM-equivalent kit delivers three precision-engineered components manufactured to original equipment specifications: the serpentine belt (LR051263), idler pulley (LR035544), and belt tensioner (LR035546). Each part restores factory performance and resynchronizes the entire drivetrain accessory chain.
Sourced and tested for Land Rover diesel and petrol powerplants, these parts carry a 1-year warranty and are backed by Victorious' 30-day money-back guarantee. Installation takes 45–90 minutes with common hand tools; no special equipment required.
What's Included
🔗
6PK Serpentine Belt
OEM Part LR051263 / 6PK2434 – resists cracking and slip
⚙️
Idler Pulley
OEM Part LR035544 – sealed ball bearing, zero runout
🔧
Belt Tensioner Assembly
OEM Part LR035546 – automatic spring-loaded adjustment
Note: You may purchase individual components or the complete 3-piece kit. Select your preferred option at checkout.
Product Highlights
OEM-quality materials tested to 100,000+ mile durability
Tensioner auto-adjusts for consistent belt load across RPM range
Idler pulley features sealed ball bearing construction
Serpentine belt resists UV, ozone, and thermal cracking
Direct fit—no drilling, cutting, or modifications needed
Restores alternator output and A/C compressor performance
Eliminates belt slip and squealing on cold start
Warranty: 1 year parts + Labour support
Fits 3.0L V6 and compatible 5.0L V8 Discovery/Range Rover variants
Installation time: 45–90 minutes with hand tools only
Fitment & Compatibility
Vehicle & Model Year
Engine
Fitment
Land Rover Discovery 4 (LR4) 2010–2016
3.0L V6 Petrol
Direct Fit
Land Rover Discovery 4 (LR4) 2010–2013
5.0L V8 Petrol
Direct Fit
Range Rover Vogue (L405) 2013–2020
3.0L V6 Petrol
Direct Fit
Range Rover Vogue (L405) 2010–2012
5.0L V8 Petrol
Direct Fit
Range Rover Sport (L494) 2010–2013
5.0L V8 Petrol
Direct Fit
Range Rover Sport (L494) 2014–2020
3.0L V6 Petrol
Direct Fit
Range Rover Sport (L541) 2022–Present
All Engines
Not Compatible
Range Rover Evoque / Velar
All Engines
Not Compatible
Unsure about your vehicle? Email us your VIN or registration plate at support@victorious.shop or call +44 203 943 9919 (Mon–Fri 9am–7pm UK time) for instant fitment confirmation.
Installation Notes
⏱ Difficulty: Intermediate | Time: 45–90 minutes
Disconnect battery. Locate negative terminal on battery and remove clamp. Allow engine to cool to ambient temperature.
Remove upper engine cover. Unclip plastic trim panels above serpentine belt to expose pulley system and routing diagram.
Release belt tension. Using a ½-inch breaker bar, rotate the automatic tensioner clockwise to decompress spring load. Slide worn belt free from all pulleys.
Remove idler and tensioner. Unbolt (typically two 13mm bolts each). Inspect mounting surfaces for corrosion; clean with wire brush if present.
Install new tensioner and idler. Hand-torque all fasteners first, then final-tighten to 25 Nm (18 ft-lb) using a calibrated torque wrench.
Route new serpentine belt. Begin at crankshaft pulley. Follow the routing diagram embossed on the engine cover or printed on your new belt. Ensure all serpentine teeth seat fully in each pulley groove.
Tension belt. Rotate tensioner clockwise to allow belt to settle. Release tension gradually—the spring will auto-adjust within 30 seconds.
Hand-check belt run. Rotate engine manually (wrench on crankshaft bolt) through two full revolutions. Belt should track straight with no binding or edge rub.
Start engine and listen. After cold start, you should hear smooth belt operation within 2–3 seconds. No squealing means correct tension.
Reconnect battery and clear any fault codes. If your vehicle logged a serpentine belt warning, use an OBD-II scanner to reset the diagnostic trouble code.
⚠️ Critical: Do not over-tension the belt. Over-tension accelerates bearing wear and can snap the belt under load. The automatic tensioner is calibrated at the factory; trust the spring action.
Ready to Restore Your Engine's Heart?
Your Discovery 4 or Range Rover deserves OEM-quality serpentine belt components that'll keep your alternator charging, water pump circulating, and A/C compressor humming for another 100,000 miles. This kit does exactly that—with Victorious support every step of the way.
Browse Discovery 4 Parts
Use code 22GET20 for 20% off any 2 items.
★★★★★
4.9/5 Stars
✓
12,300+ Verified Reviews
🌍
Worldwide Shipping via DHL, FedEx, UPS
💰
30-Day Money-Back Guarantee
Disclaimer: Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All trademarks, logos, and vehicle names remain the property of their respective owners. This product is designed for use with the vehicles listed above and is supplied as an aftermarket replacement component. Always verify fitment with your vehicle's documentation or consult our sales team before purchase.
```
OEM Intake Exhaust Camshaft Sprocket Actuator for LR2 Range Rover Evoque Discovery Sport Jaguar Ford LR095897 033733 CJ5E6C524AE
from £ 148.98
Victorious · Engine Parts · OEM Powertrain Components
OEM Intake & Exhaust Camshaft Sprocket Actuator
Variable valve timing precision for 2.0L Ecoboost engines across Land Rover, Range Rover, and Ford platforms.
LR095897 | LR033733
2007–2017
Powertrain
Direct OEM Fit
Dual Actuator Set
Overview
This is a precision-engineered OEM camshaft sprocket actuator set designed for Land Rover Freelancer LR2, Range Rover Evoque, Range Rover Sport, Discovery Sport, Jaguar XF/XJ, and Ford Mondeo / Focus / Galaxy platforms running the 2.0L 16-valve turbocharged petrol engine. The variable valve timing (VVT) system is critical to engine efficiency, fuel economy, and emissions control—and this actuator assembly delivers OEM-grade performance without OEM pricing.
Each set comprises both intake and exhaust camshaft sprocket actuators. The intake unit features a 33.1mm thickness, while the exhaust measures 36.5mm, both engineered to exacting tolerances. Direct replacement for part numbers LR095897, LR033733, CJ5E6C524AE, and CJ5E6C525AE.
Built from durable metal construction with a 12-month warranty. OEM-grade quality control, delivered with full international fitment assurance and 30-day money-back guarantee.
What's Included
🔧
Intake Camshaft Actuator
33.1mm precision assembly
⚙️
Exhaust Camshaft Actuator
36.5mm precision assembly
📋
Fitment Documentation
Full part number cross-reference
✅
12-Month Warranty
Full parts & labour coverage
Product Highlights
Direct OEM replacement – swap-in compatibility, zero modification
Dual intake & exhaust actuators – comprehensive VVT system repair
2.0L Ecoboost certified – proven across 100,000+ Land Rover vehicles
Metal construction – superior durability vs. plastic alternatives
OEM tolerances – 33.1mm & 36.5mm precision engineered
Cold & hot start reliability – optimised for harsh climates
Fuel economy improvement – corrects timing drift, restores MPG
Emissions-compliant – meets Euro 5 / Euro 6 standards
Installation-ready – fits with standard OEM tools
30-day money-back guarantee – full confidence assurance
Compatibility Matrix
Vehicle Model
Year Range
Engine
Fit Status
Land Rover Freelancer LR2
2007–2017
2.0L EcoBoost
Direct Fit
Range Rover Evoque
2012+
2.0L EcoBoost
Direct Fit
Range Rover Sport
2014+
2.0L EcoBoost
Direct Fit
Range Rover Vogue
2013+
2.0L EcoBoost
Direct Fit
Land Rover Discovery Sport
2015+
2.0L EcoBoost
Direct Fit
Jaguar XF
2009–2015
2.0L EcoBoost
Direct Fit
Jaguar XJ
2010+
2.0L EcoBoost
Direct Fit
Ford Mondeo
2007–2016
2.0L EcoBoost
Direct Fit
Ford Focus
2011–2017
2.0L EcoBoost
Direct Fit
Ford Galaxy / S-Max
2006–2016
2.0L EcoBoost
Direct Fit
Installation Notes
Difficulty: Intermediate | Estimated Time: 2–3 hours
Disconnect negative battery terminal and allow cooling (engine off minimum 30 minutes).
Remove engine cover and unbolt camshaft actuator retaining bolts (M6 or M8 depending on model).
Withdraw old intake actuator and discard sealing rings. Mark oil lines for reinstallation.
Clean mounting surface with cloth and light degreaser. Inspect for debris or corrosion.
Install new intake actuator with fresh O-rings supplied. Tighten to 8–12 Nm.
Repeat steps 3–5 for exhaust actuator (36.5mm assembly). Verify line routing before final torque.
Reconnect battery, start engine, and monitor for warning lights for 10 minutes (limp-mode check).
Perform dealer-level diagnostic scan to clear any residual fault codes and confirm VVT system calibration.
⚠️ Important: Always use a calibrated torque wrench. Over-tightening can strip threads or damage soft metal housings. If you're unfamiliar with camshaft work, we recommend professional installation via a qualified Land Rover / Ford specialist.
Complete Your Powertrain Refresh
Variable valve timing precision restores fuel economy, cold-start response, and engine smoothness. Invest in OEM-grade reliability for a fraction of dealer cost.
Shop Now
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ reviews
30-day money-back guarantee
Worldwide DHL / FedEx shipping
+44 203 943 9919 support
Victorious Automotive is not affiliated with Jaguar Land Rover Ltd., Ford Motor Company, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This listing provides fitment data for reference only. Always verify part numbers before purchase. Prices and availability subject to change.
2.0L 16V Timing Chain Guide arm Crankshaft Sprocket Tensioner for Land Rover LR2 Evoque RRS LR025000 025263 025632 025264 095137
from £ 160.72
Victorious · Timing Systems · Engine
2.0L 16V Timing Chain Kit with Guide Arm, Tensioner & Crankshaft Sprocket
Complete timing drive overhaul for 2013+ Land Rover Freelander LR2, Evoque, and Range Rover models—premium-grade parts with 12-month warranty.
LR025000 · LR025263 · LR025632 · LR095137
2013–2022
Timing System
Engine Parts
2.0L Petrol 16V
OEM-Quality
Overview
If you own a 2013+ Land Rover Freelander LR2, Range Rover Evoque, Range Rover Sport, Discovery Sport, or compatible Jaguar or Ford 2.0L 16V petrol engine, timing chain wear is inevitable. The original chain, guide arm, and tensioner accumulate stress over miles, leading to increased wear noise, reduced efficiency, and potential catastrophic engine damage if left unchecked.
This complete timing chain kit replaces all critical components in one service interval. You get a main timing chain guide (LR025000), precision-cut timing chain (LR025263), secondary tensioner arm (LR025632), and electronically controlled tensioner (LR095137). For comprehensive rebuilds, we also offer the crankshaft sprocket and washers separately.
Built to OEM specification by Partsmost with 12-month warranty coverage, this is the professional choice for Land Rover and Range Rover timing system overhauls—eliminating the false economy of piecemeal repairs.
What's Included
⛓️
Main Timing Chain Guide
LR025000 / AJ813113
🔗
Timing Chain
LR025263 / AJ813088
🎯
Tensioner Arm
LR025632 / AJ813111
⚙️
Chain Tensioner
LR095137 / C2D53040
🔄
Crankshaft Sprocket (Optional)
LR025264 / AJ813107
🪛
Sprocket Washers (Optional)
LR025011 (qty 2)
Product Highlights
OEM-matched specification for 2013–2022 Freelander LR2, Evoque, Range Rover Sport, Discovery Sport
Tension electronics calibrated for Land Rover factory tolerances
Includes all four primary timing drive components
Compatible with Jaguar XE, XF, XJ and Ford Focus, Mondeo, Galaxy 2.0L engines
Prevents catastrophic timing slip and engine damage
Reduces valve timing noise and improves fuel efficiency
Direct replacement for worn, stretched, or noisy chains
12-month manufacturer's warranty on all parts
Professional-grade fitment—no modifications required
Available as 4-piece core set or 7-piece complete rebuild kit
Compatibility
Vehicle Model
Year Range
Engine
Fit Status
Land Rover Freelander 2 (LR2)
2013–2022
2.0L 16V Petrol
Direct Fit
Range Rover Evoque (L538)
2011–2018
2.0L 16V Petrol
Direct Fit
Range Rover Evoque (L551)
2019–2022
2.0L 16V Petrol
Direct Fit
Range Rover Sport (L494)
2013–2020
2.0L 16V Petrol
Direct Fit
Range Rover Sport (L461)
2022+
2.0L 16V Petrol
Direct Fit
Range Rover Vogue (L405)
2013–2020
2.0L 16V Petrol
Direct Fit
Discovery Sport (L550)
2015–2022
2.0L 16V Petrol
Direct Fit
Jaguar XE (X760)
2015–2022
2.0L 16V Petrol
Direct Fit
Jaguar XF (X250, X260)
2008–2020
2.0L 16V Petrol
Direct Fit
Jaguar XJ (X351)
2009–2019
2.0L 16V Petrol
Direct Fit
Ford Focus Mk3
2010–2018
2.0L 16V Petrol
Direct Fit
Ford Mondeo Mk4
2007–2014
2.0L 16V Petrol
Direct Fit
Ford Galaxy
2006–2015
2.0L 16V Petrol
Direct Fit
Before purchasing: Cross-reference the OE part numbers listed (LR025000, LR025263, LR025632, LR095137, LR025264, LR025011) with your vehicle documentation, or contact our team with your VIN for instant fitment verification.
Installation Notes
Difficulty & Time Estimate
Difficulty: Advanced (Requires engine bay access, timing tool familiarity, and OEM service manual reference.)
Estimated Time: 4–6 hours (Professional workshop: 2–3 hours.)
Installation Steps
Remove engine covers and auxiliary components to access timing chain cover.
Drain coolant; disconnect hoses and disconnect battery negative terminal.
Unbolt timing chain cover and gasket; inspect crankshaft and camshaft timing marks.
Release tensioner arm spring tension (use OEM timing lock tool to prevent rotation).
Remove old timing chain, guide arm, and tensioner assembly.
Fit new main timing chain guide (LR025000) and secure bolts to OEM torque spec.
Thread new timing chain (LR025263) around crankshaft and camshaft sprockets, aligning timing marks precisely.
Install new tensioner arm (LR025632) and electronic tensioner (LR095137); verify free movement.
Refit timing chain cover with fresh gasket; apply OEM-spec sealant.
Refill coolant, reconnect battery, and run engine to verify correct timing and tensioner activation.
Perform OBD scan to clear any pending timing codes; test-drive for noise confirmation.
Critical: Incorrect timing chain installation or tensioner calibration will cause valve timing errors, misfiring, and potential engine damage. If uncertain, engage a Land Rover-certified technician. Do not attempt without access to OEM service manual and timing tools.
Ready to Restore Your Timing?
Stop guessing about timing chain wear. This complete kit eliminates the risk of catastrophic engine failure—backed by our 12-month warranty and the expertise of 12,300+ satisfied Land Rover and Range Rover owners.
Shop This Kit
Use code 22GET20 for 20% off when you order any 2 items.
✓ 4.9/5 · 12,300+ reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL, FedEx, UPS shipping
✓ Call +44 203 943 9919
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar, Ford, or their parent companies. All brand names and vehicle model designations are used for identification and compatibility reference only. OEM specifications and technical data sourced from manufacturer service bulletins. Always verify fitment with your vehicle documentation or consult a certified technician before purchase.
NEW 3.0 DIESEL ALTERNATOR DRIVE BELT TENSIONER PULLEY FOR LAND ROVER RANGE ROVER 2013- RR SPORT 2014- LR062006 LR035493 LR036304
from £ 45.24
Victorious · Engine · Drivetrain
3.0L Diesel Alternator Drive Belt Tensioner Pulley Set – Range Rover & Sport
Complete OE-spec belt drive system for 2013+ Range Rover and 2014+ Range Rover Sport diesel engines.
L405 / L494
2013–2020
Diesel Engine
3.0L 24V
Engine Accessory
OE Compatible
Overview
The Range Rover Vogue L405 and Range Rover Sport L494 have earned their reputation for capability, but the 3.0L TDV6 diesel engine demands precision maintenance. A worn or failing belt tensioner, idler pulley, or drive belt compromise engine reliability and can lead to serpentine belt failure—risking alternator shutdown and stranded journeys.
This complete drive belt system delivers OE-specification components engineered to meet Land Rover's original performance tolerances. Whether you're replacing a single worn component or performing preventive maintenance, this set ensures your diesel Range Rover runs with the dependability your investment deserves.
Factory-equivalent fitment, stable performance under load, and simplified installation make this an essential refresh for any owner looking to keep their diesel Range Rover or Sport running strong.
What's Included
⚙️
Alternator Drive Belt
LR062006 – 3.0L diesel engine
🔧
Belt Tensioner
LR035493 – Dynamic tension control
🔄
Idler Pulley (70mm)
LR036304 – Dual-role compatibility
✓
Installation Support
Step-by-step guidance included
Product Highlights
OE-specification design matching Land Rover factory tolerances
Direct fit for L405 Range Rover Vogue (2013+) and L494 Sport (2014+)
Engineered for 3.0L TDV6 diesel and compatible petrol engines
Tensioner maintains optimal belt load and reduces vibration
70mm idler pulley compatible with multiple accessory drives
Stable performance under high torque and sustained load
Easy and fast installation with standard tools
Complete preventive maintenance solution
Backed by Victorious 30-day money-back guarantee
Global shipping via DHL, FedEx, UPS with track and trace
Compatibility
Model / Year
Engine
Drive Belt (LR062006)
Tensioner (LR035493)
Pulley (LR036304)
Range Rover Vogue L405 (2013–2020)
3.0L TDV6 Diesel
Direct Fit
Direct Fit
Direct Fit
Range Rover Sport L494 (2014–2020)
3.0L TDV6 Diesel
Direct Fit
Direct Fit
Direct Fit
Range Rover Sport L494 (2014–2020)
3.0L V6 Petrol
Not Included
Compatible
Compatible
Discovery LR4 (2010+)
3.0L TDV6 Diesel
Not Included
Compatible
Compatible
Discovery 5 (2017+)
3.0L Diesel / Petrol
Not Included
Not Compatible
Compatible
Range Rover Velar (2018–2022)
3.0L Engines
Not Included
Not Compatible
Compatible
Defender (2020+)
3.0L Diesel / V8
Not Included
Not Compatible
Compatible
Always verify your vehicle's VIN and original part number before ordering. Contact us for fitment confirmation: +44 203 943 9919 (Mon–Fri 9am–7pm).
Installation
Difficulty: Intermediate
Estimated Time: 60–90 minutes (with mechanical experience; longer if unfamiliar with engine bay layout). Requires basic hand tools and serpentine belt tool (optional but recommended).
Steps
Disconnect the negative battery terminal to prevent accidental engagement.
Remove the plastic engine cover and access panel to expose the belt drive area.
Using a belt tool or 13mm socket, rotate the automatic tensioner to relieve tension and remove the old drive belt.
Unbolt the tensioner assembly (typically 1–2 bolts) and remove the idler pulley if worn or damaged.
Install the new tensioner in reverse order, ensuring it seats firmly and moves freely.
Install the new idler pulley (70mm), confirming proper alignment and no runout.
Route the new drive belt according to the routing diagram (usually under the radiator shroud or driver-side fender area). Verify no twists or misalignment.
Release the tensioner tool to allow spring pressure to automatically tension the new belt.
Rotate the engine by hand 2–3 times to confirm smooth belt tracking and no binding.
Reconnect the battery terminal, run the engine at idle for 30 seconds, and check for vibration or noise.
Allow the belt to settle for 30 minutes before running at highway speeds.
⚠️ Important: Do not attempt this work if unfamiliar with engine bay layout. Incorrect tensioner or pulley installation can lead to belt slip, loss of alternator charging, and engine shutdown. If in doubt, consult a Land Rover specialist or certified mechanic. Improper installation voids this guarantee.
Ready to Keep Your Diesel Range Rover Running Strong?
A properly maintained belt drive system is the foundation of diesel engine reliability. This OE-spec set ensures your 2013+ Range Rover Vogue or 2014+ Range Rover Sport diesel operates at factory performance—no compromise.
Shop Now
Use code 22GET20 for 20% off when you buy any 2 items
4.9/5 – 12,300+ verified reviews
30-day money-back guarantee
Worldwide DHL, FedEx, UPS shipping
+44 203 943 9919 – Expert support
Victorious Automotive is an independent aftermarket supplier. This product is not affiliated with, endorsed by, or manufactured by Land Rover, Jaguar Land Rover, or any official Land Rover importer. All vehicle and brand names are used for identification and compatibility reference only. Always confirm fitment with your vehicle's VIN and original part numbers before purchase.
ALTERNATOR DRIVE BELT / IDLER PULLEY / TENSIONER FOR RANGE ROVER SPORT VELAR NEW DISCOVERY 4 DEFENDER LR091608 LR035545 LR079294
from £ 38.55
```html
Victorious · Engine Parts · Drive Systems
Alternator Drive Belt, Idler Pulley & Tensioner Kit for Range Rover Sport, Velar & Discovery
Complete serpentine system replacement for 3.0L V6 and 5.0L V8 petrol engines—OE-equivalent quality with direct fitment.
LR091608
LR035545
LR079294
2010–Present
3.0L / 5.0L Petrol
Rubber & Metal
Front-Mounted
Complete Kit
Overview
Range Rover Sport, Velar, Discovery 4, and Defender owners know that the alternator drive belt, idler pulley, and tensioner form the backbone of your engine's accessory system. Over time, these components wear, crack, and lose tension—reducing charging efficiency, increasing electrical strain, and risking complete failure on the road.
Our Partsmost alternator drive belt and pulley kit delivers OE-equivalent performance across three essential components. Engineered from premium rubber, cast metal, and reinforced compound materials, each piece meets the precise specifications of Land Rover and Range Rover powerplants, ensuring reliable belt tension, smooth idler action, and stable alternator output.
Whether you're maintaining a Range Rover Velar 3.0L SC V6, a Discovery 4 with petrol engine, or a new Defender 5.0L V8, this kit eliminates the hassle of sourcing parts individually. Direct fitment, comprehensive coverage, and 1-year warranty included.
What's Included
🔧
Alternator Drive Belt
LR091608 / LR184662 / C2D49052 – serpentine replacement
⚙️
Idler Pulley
LR035545 / LR010724 – smooth belt guidance
🔩
Tensioner Assembly
LR079294-T / LR091612 – automatic tension control
📋
Installation Guide
Step-by-step instructions for 3.0L and 5.0L engines
Product Highlights
OE-Equivalent Quality – Meets all original Land Rover and Range Rover engine specifications
Aftermarket Brand – Premium alternative to dealership pricing; proven reliability
Complete System – Belt, pulley, and tensioner in one purchase—no separate sourcing
3.0L & 5.0L Compatible – Covers V6 petrol and V8 petrol engines across model range
Easy Installation – Front-mounted components; tool-friendly design for DIY or pro fitting
Durable Materials – Rubber, cast metal, and polypropylene for long-term performance
Improved Charging – Proper tension ensures stable alternator output and battery health
Silent & Smooth – Reduces belt slip noise and vibration under load
1-Year Warranty – Comprehensive coverage and peace of mind
Global Shipping – Worldwide delivery via DHL, FedEx, and UPS
Compatibility Chart
Vehicle Model
Year Range
Engine
Part Number
Status
Range Rover Velar
2017–2023
3.0L SC V6 Petrol
LR091608
Direct Fit
Range Rover Sport (Gen 3)
2014–2023
3.0L V6 Petrol
LR035545
Direct Fit
Discovery 4 / LR4
2010–2016
3.0L V6 Petrol
LR035545
Direct Fit
Range Rover (L405)
2013–2020
5.0L V8 Petrol
LR079294-T
Direct Fit
Discovery (Gen 5)
2017–2023
3.0L V6 Petrol
LR035545
Direct Fit
Defender (L663)
2020–Present
5.0L V8 Petrol
LR079294-T
Direct Fit
Range Rover Sport (Gen 2)
2010–2013
3.0L V6 Petrol
LR035545
Direct Fit
Jaguar XJ, XE, XF, F-Type, F-Pace
2010–2019
3.0L & 5.0L Petrol
LR091608
Direct Fit
Diesel Engines (Any)
—
TDV6, TDV8
—
Not Compatible
⚠️ Important: Verify your vehicle's exact part number before purchase. Cross-reference with your service handbook or contact us with your VIN to confirm compatibility. Diesel engines require alternative components.
Installation Notes
Difficulty Level: Intermediate | Time: 1–2 hours
Disconnect battery negative terminal to prevent accidental starter engagement.
Remove engine cover and locate serpentine belt routing diagram (usually affixed to underside of hood).
Release tensioner spring using a suitable wrench to relieve belt tension; support with a block or jack if required.
Slide old belt off pulleys and inspect idler pulley for damage, wobbling, or bearing play.
Remove idler pulley bolts (typically 1–2 bolts per pulley) and lift clear. Note bolt positions.
Remove tensioner assembly bolts and carefully disconnect hydraulic or spring-loaded mechanism.
Install new tensioner first, then idler pulley, aligning all bolt holes precisely.
Route new serpentine belt carefully around all pulleys, following diagram. Ensure belt sits fully in pulley grooves—no edge run-out.
Release tensioner to auto-tension new belt. Spin engine by hand 2–3 revolutions to seat components.
Reconnect battery and start engine. Listen for abnormal noise. Check belt tension using a belt-tension gauge if available (typically 110–140 lbf for new belts).
Reinstall engine cover and test drive at idle and under light load.
⚠️ Safety: Never work on a running engine. If your tensioner is hydraulic, do not attempt to re-pressurize—replace as a unit. If belt slips after installation, check pulley alignment and re-seat belt immediately; do not drive.
Why Choose Victorious?
We partner with trusted aftermarket suppliers to bring you OE-equivalent components at fair pricing. Every alternator drive belt, pulley, and tensioner is tested for fit and durability before shipping. Our 30-day money-back guarantee and 4.9★ rating (12,300+ reviews) reflect our commitment to your satisfaction.
Questions about compatibility? Contact us on +44 203 943 9919 (Mon–Fri 9am–7pm). We'll verify your VIN and confirm the exact parts you need.
Ready to Restore Charging Performance
Don't let a worn belt reduce your electrical system reliability. Shop our complete alternator drive belt, idler pulley, and tensioner kit today—backed by Victorious warranty and worldwide shipping.
Add to Cart
Use code 22GET20 for 20% off when you buy any 2 items.
🚚 Worldwide Shipping
🔄 30-Day Returns
⭐ 4.9★ Rated
📞 Expert Support
Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or any official Land Rover/JLR entity. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility is offered as reference only; always verify fitment with your vehicle's documentation or contact us directly. Installation of this product may require professional expertise; improper installation can cause engine damage. Victorious accepts no liability for incorrect installation, damage to vehicles, or injuries resulting from use or misuse of this product.
```
We are here to help, Our Phone lines are open Monday to Friday 9-7PM