DOHC Timing Chain Tensioner Guide arm for 3.0L 5.0L Land Rover Discovery 4 Range Rover Sport LR032048 LR051008 LR051011 012 013
from £ 197.56
Victorious · Land Rover Discovery 4 · Engine Timing
DOHC Timing Chain Tensioner & Guide Arm Kit – Discovery 4 | 3.0L / 5.0L
Complete OE-specification timing kit for Land Rover Discovery 4, Range Rover Sport, and Range Rover 2010–2018. Restore original engine performance.
Discovery 4 LR4
Range Rover Sport
Range Rover L405
3.0L V6 DOHC
5.0L V8 DOHC
2010–2018
Steel / Aluminium
Direct OE Fit
The Discovery 4 Timing Chain System
Your Land Rover Discovery 4, Range Rover Sport, or Range Rover relies on a precision timing chain assembly to synchronise your 3.0L supercharged V6 or 5.0L naturally aspirated V8 engine. Over time—especially in higher-mileage examples—tensioner wear and guide arm flex compromise engine timing accuracy, leading to rough idle, power loss, and potential internal damage.
This complete OE-specification kit restores factory timing geometry across all critical points: the primary timing chain, dual tensioners, and both left and right guide arms. Whether you're rebuilding after 100,000 miles or preventing failure during a major service, this kit delivers genuine peace of mind.
Every component is manufactured to Land Rover tolerances and validated against original part numbers LR032048, LR051008, LR051011, LR051012, and LR051013. Install with confidence.
What's Included
⛓️
Timing Chain (×2)
OE LR032048 – Primary synchronisation
🔧
Tensioner Assembly (×2)
OE LR051008 – Maintains optimal chain tension
🛡️
Guide Arm RH (×1)
OE LR051011 – Right-side alignment
🛡️
Guide Arm LH (×1)
OE LR051012 – Left-side alignment
🔗
Tensioner Guide Arm (×2)
OE LR051013 – Secondary tension control
📋
OE Part Reference Guide
Validates fitment across all variants
Product Highlights
OE Specification: Manufactured to Land Rover factory tolerances and material grades
Complete System: All critical timing components in one kit—no separate ordering
Dual Engine Support: Compatible with 3.0L supercharged V6 and 5.0L naturally aspirated and supercharged V8
Validated OE Numbers: Matches LR032048, LR051008, LR051011, LR051012, LR051013
Steel & Aluminium Construction: Durability and precision-engineered wear surfaces
Direct Replacement: Bolt-in fit—no modification or adaptation required
Long-Life Materials: Resists fatigue and stretch under sustained engine loads
VVT Compatible: Works seamlessly with variable valve timing systems on AJ133 and TDV6 engines
Tested Fitment: Validated across 2010–2018 model years (Discovery 4, Range Rover Sport, Range Rover)
Backed by Warranty: 12-month manufacturer guarantee on all components
Compatibility
Vehicle
Engine
Years
Fit Status
Land Rover Discovery 4 (LR4)
3.0L V6 TDV6 / 5.0L V8 AJ133
2010–2015
Direct Fit
Range Rover Sport L320
3.0L V6 Supercharged / 5.0L V8 AJ133
2010–2013
Direct Fit
Range Rover Sport L405 (Early)
5.0L V8 Supercharged AJ133
2010–2013
Direct Fit
Range Rover Sport L494
3.0L V6 Supercharged / 5.0L V8 AJ133
2014–2018
Direct Fit
Range Rover L405 (Vogue)
3.0L V6 Supercharged / 5.0L V8 AJ133
2010–2018
Direct Fit
Range Rover L495 (Classic)
3.0L V6 / 5.0L V8
2013–2017
Requires Verification
Discovery 5 (L462)
3.0L MHEV / 2.0L Petrol
2017–Present
Not Compatible
Defender L663
2.0L Petrol / 3.0L MHEV
2020–Present
Not Compatible
Always verify your OE part number against this kit before purchase. Contact us at +44 203 943 9919 with your VIN for definitive fitment confirmation.
Installation Notes
⏱️ Difficulty: Advanced | Time: 4–6 hours
This is an engine bay job best suited to experienced DIY enthusiasts or professional technicians. Timing chain work requires precision and correct tool usage.
Disconnect battery: Negative terminal first. Wait 10 minutes for system discharge.
Remove engine covers: Plastic and metal covers blocking access to timing bay. Document bolt locations.
Drain coolant (optional): If working near coolant passages, drain into a clean container for reuse.
Mark timing: Use paint marker to identify crankshaft, camshaft, and auxiliary shaft positions. Take reference photos.
Remove tensioner: Unbolt old tensioner assembly (OE LR051008). Note preload settings.
Release chain tension: Support timing chain with a wire to prevent damage to adjacent components.
Remove guide arms: Unbolt RH (LR051011) and LH (LR051012) guide arms from cylinder head. Clean mounting surfaces.
Remove old timing chain: Carefully lift away primary chain (OE LR032048). Inspect sprockets for damage.
Install new guide arms: Bolt RH and LH guide arms in place. Torque to manufacturer spec (typically 18–22 Nm).
Route new chain: Align with crankshaft and camshaft sprockets using reference marks. Ensure slack is removed gradually.
Install tensioner guide arms: Fit OE LR051013 components. Verify clearance to adjacent passages.
Install new tensioner: Secure OE LR051008. Prime tensioner per manufacturer procedure to ensure oil flow.
Verify timing: Rotate engine by hand (crankshaft pulley) 2–3 full turns. Check that camshafts track correctly with crankshaft.
Reconnect systems: Refill coolant if drained. Reconnect battery negative terminal last.
Test and bleed: Start engine, listen for timing noise. Run at idle for 5 minutes. Bleed any air from coolant system.
⚠️ Critical: Incorrect timing installation can cause catastrophic engine damage. If you are uncertain at any step, consult a qualified Land Rover technician or contact us for guidance. Do not force components into position.
Restore Timing Precision. Protect Your Engine.
A failing timing chain system doesn't announce itself loudly—it whispers through a rough idle, hesitant throttle response, and mounting dread in the engine bay. This OE-specification kit addresses the problem at its source, restoring the synchronisation your Discovery 4, Range Rover Sport, or Range Rover was engineered for.
Choose precision. Choose OE fitment. Choose proven compatibility across three decades of Land Rover engineering.
View Discovery 4 Timing Kits
Save 20% when you buy any 2 items:
22GET20
4.9★ 12,300+ verified reviews
✓ 30-day money-back guarantee
📞 Expert support Mon–Fri 9am–7pm
🌍 Worldwide shipping DHL, FedEx, UPS
Disclaimer: Victorious Automotive is an independent aftermarket parts supplier and is not affiliated with, endorsed by, or a subsidiary of Jaguar Land Rover Ltd, or any of its parent, subsidiary, or affiliate companies. All product names, logos, and brands are the property of their respective owners. Product descriptions and compatibility information are provided for reference only. Always verify OE part numbers and vehicle fitment before purchase. Installation of this product may require professional service. Victorious Automotive assumes no liability for improper installation, modifications, or use outside manufacturer specifications.
5.0 PETROL CYLINDER HEAD GASKET FOR LAND ROVER LR4 RANGE ROVER RR SPORT VELAR NEW DEFENDER LR010692 LR026141 / LR010693 LR026142
from £ 160.09
Victorious · Land Rover · Engine Gaskets
5.0L Petrol Cylinder Head Gasket — Land Rover & Range Rover
Premium multilayer steel construction engineered for 5.0L petrol engines across Range Rover, Discovery, and Defender platforms.
5.0L V8 Petrol
2010–2026
Multilayer Steel (MLS)
LR010692 / LR010693
Left & Right Sides
OEM Equivalent
Overview
This 5.0L petrol cylinder head gasket is engineered for Land Rover Discovery 4 (2010+), Range Rover Sport (2010–2013, 2014+), Range Rover Vogue (2010–2012, 2013+), Range Rover Velar (2017+), and Defender 110 (2020+). Delivering the precision seal your engine demands, this Partsmost-branded gasket maintains OEM performance specifications while offering excellent durability and heat resistance.
Built from multilayer steel (MLS) construction, this gasket resists warping, provides superior compression, and eliminates fuel seepage. The 4-notch design ensures perfect alignment and secure positioning against the cylinder head, reducing installation errors and guaranteeing long-term reliability. Whether you're performing a head gasket replacement after high mileage or rebuilding your engine, this gasket delivers the seal integrity your Land Rover deserves.
Available as a matched pair (left and right), this gasket comes with a 1-year warranty and meets or exceeds OEM specifications. Quick installation, zero chemical concerns, and stable performance make it the go-to choice for Land Rover and Range Rover enthusiasts who demand both quality and value.
What's Included
⚙️
Pair of Gaskets
Left and right cylinder head gaskets
✓
OEM Fit Guarantee
Direct replacement, no modifications required
🛡️
1-Year Warranty
Full coverage against defects and premature failure
📋
Technical Documentation
Complete part numbers and fitment data included
Product Highlights
Multilayer Steel (MLS) Construction — Superior durability and heat resistance across extended temperature ranges
Perfect OEM Fit — Replaces LR010692 (RH), LR010693 (LH), and all referenced part numbers seamlessly
4-Notch Design — Precision alignment ensures correct positioning and eliminates installation errors
Matched Pair — Left and right gaskets supplied together for complete head sealing
Zero Fuel Seepage — MLS technology prevents leaks around combustion chambers and coolant passages
Easy Installation — Works with standard head bolt torque specs; no special tools or modifications needed
High Reliability — Stable performance across 2010–2026 model years and engine variants
Aftermarket OEM Quality — Manufactured to OEM specifications at competitive aftermarket pricing
Comprehensive Fitment — Compatible with Discovery LR4, Range Rover, Range Rover Sport, Velar, and Defender platforms
Fast Shipping Worldwide — DHL, FedEx, UPS delivery to your door with full tracking
Compatibility Chart
Vehicle
Year Range
Engine
Fitment
Discovery 4 (LR4)
2010+
5.0L V8 Petrol
Direct Fit
Range Rover Vogue L405
2010–2020
5.0L V8 Petrol
Direct Fit
Range Rover Sport L494
2010–2013, 2014–2020
5.0L V8 Petrol
Direct Fit
Range Rover Velar L560
2017–2022
5.0L V8 Petrol
Direct Fit
Defender 110 L663
2020+
5.0L V8 Petrol
Direct Fit
Non-5.0L Petrol Models
Any
Diesel, smaller petrol
Not Compatible
Always verify your engine code and OEM part number before ordering. Contact us with your VIN for 100% fitment confirmation.
Installation & Fitment Notes
Difficulty Level: Intermediate
Head gasket replacement requires engine head removal and proper torque specifications. We recommend professional installation unless you have advanced engine knowledge.
Estimated Time: 6–10 hours (varies by model and prior experience)
Installation Overview
Remove engine valley cover and disconnect necessary hoses and electrical connectors
Remove cylinder head bolts in reverse order (follow torque sequence diagram for your model)
Carefully lift cylinder head off engine block
Clean mating surfaces thoroughly with gasket scraper and solvent
Position new gasket (left or right) onto engine block with notches facing correct direction
Install cylinder head and hand-tighten bolts in sequence
Torque head bolts to OEM specification (typically 40–50 Nm initial, then +90° angle tightening)
Reinstall all hoses, connectors, and valley cover
Fill coolant system, bleed air, and start engine to check for leaks
Allow engine to reach operating temperature and recheck all seals
Critical: Do not reuse old head bolts if they are stretch bolts (check OEM service manual for your model). Use a calibrated torque wrench and follow the factory torque sequence precisely to prevent gasket failure.
Part Numbers & Reference
Manufacturer Part Numbers (OEM Equivalent):
Right Side: LR010692, LR026141, LR084186, LR105294
Left Side: LR010693, LR026142, LR084185, LR105293
This product is brand-new, unused, and supplied with full warranty documentation. Material origin: Mainland China (manufactured to Land Rover OEM standards).
Ready to Restore Your Engine Seal?
Premium 5.0L cylinder head gasket engineered for Land Rover and Range Rover platforms. Precision fit, OEM-grade quality, worldwide delivery, and a 30-day money-back guarantee.
View on Shop
Use code 22GET20 for 20% off when you buy any 2 items
✓ 4.9/5 Stars — 12,300+ verified reviews
✓ 30-Day Guarantee — Full refund, no questions
✓ Worldwide Shipping — DHL, FedEx, UPS, TNT
✓ Expert Support — +44 203 943 9919 (Mon–Fri 9am–7pm)
Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Jaguar Land Rover PLC, Land Rover, Range Rover, Defender, Discovery, or any official Land Rover subsidiary. All product names, logos, and brands mentioned are the property of their respective owners and are used for compatibility and reference purposes only. This product is an aftermarket OEM-equivalent component and carries its own manufacturer warranty, separate from any factory warranty on your vehicle.
2.0L DRIVE BELT TENSIONER FOR LAND ROVER RANGE ROVER EVOQUE VELAR ALL NEW DISCOVERY SPORT JAGUAR XE XF E-PACE T2H38134 LR114017
£ 210.61
Land Rover · Multi-Vehicle · Engine
2.0L Drive Belt Tensioner – Land Rover Range Rover & Jaguar
Direct-fit OEM-spec tensioner for trouble-free serpentine belt operation across Range Rover Sport, Evoque, Discovery Sport, and Jaguar XE/XF lineups.
Discovery Sport
Range Rover Evoque
Range Rover Velar
Jaguar XE/XF
2.0L Petrol
OEM Compatible
12-Month Warranty
Overview
The serpentine belt on your Range Rover Discovery Sport, Evoque, Velar, or Jaguar XE/XF is engineered to run tight—and that's where the drive belt tensioner earns its keep. This critical component maintains consistent belt tension during cold starts, idle, and full-throttle acceleration, preventing slippage and power loss to alternator, water pump, and air conditioning.
Failure means alternator undercharge, overheating, and potential belt breakage on the motorway. This direct-fit OEM-specification tensioner restores factory belt tension and rides on a sealed roller bearing that outlasts aftermarket bolt-on designs. Built to Land Rover and Jaguar factory tolerances, it demands zero modification—drop it in and go.
Whether you're running a 2015+ Discovery Sport, 2016–2019 Evoque, 2018+ Velar, or 2015+ Jaguar XE/XF/F-Pace/E-Pace, this tensioner is your assured path to reliable belt operation and protected auxiliary components.
What's Included
⚙️
OEM-Spec Tensioner
Direct-fit sealed bearing assembly
✓
Full Compatibility List
12 Land Rover & Jaguar variants covered
🛡️
12-Month Warranty
Full manufacturer coverage
📖
Installation Support
Technical documentation & phone guidance
Product Highlights
Sealed roller bearing—no maintenance, longer lifespan vs. open designs
OEM tension calibration (factory spring rate matched to 2.0L load curve)
Direct bolt-in fit—zero modification, zero guesswork
Precision-cast housing resists corrosion and thermal fatigue
Compatible with serpentine belt replacement schedule
Prequalified for Range Rover Sport L494, Evoque L538, Velar, Discovery Sport
Meets Jaguar C2D53 and Land Rover LR114017 factory spec
Engineered for 2.0L Ingenium petrol engine load profile
Prevents belt creep, slippage, and alternator undercharge
Cold-start and high-load acceleration tested
Compatibility Matrix
Vehicle Model
Year Range
Engine
Fit
Land Rover Discovery Sport
2015–Present
2.0L Ingenium
Direct Fit
Range Rover Evoque
2016–2019
2.0L Ingenium
Direct Fit
Range Rover Sport
2016–2020
2.0L Ingenium
Direct Fit
Land Rover Discovery (All New)
2017–Present
2.0L Ingenium
Direct Fit
Range Rover Velar
2018–2019
2.0L Ingenium
Direct Fit
Jaguar F-Type
2014–Present
2.0L Ingenium
Direct Fit
Jaguar XE
2015–Present
2.0L Ingenium
Direct Fit
Jaguar XF
2016–Present
2.0L Ingenium
Direct Fit
Jaguar F-Pace
2016–Present
2.0L Ingenium
Direct Fit
Jaguar E-Pace
2017–Present
2.0L Ingenium
Direct Fit
Installation Notes
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect battery negative terminal and allow engine to cool for 20 minutes minimum.
Access the serpentine belt routing diagram (printed on radiator shroud or engine cover). Photograph or sketch it.
Remove serpentine belt using a breaker bar on the belt tensioner adjustment bolt—rotate clockwise to relieve tension.
Unbolt the old tensioner (typically 1–2 bolts, M12 or M14). Remove and set aside safely.
Install the new tensioner using factory bolt torque: 25–35 Nm. Ensure mounting surface is clean and dry.
Re-route and re-tension the serpentine belt per diagram. Use a belt tension gauge if available (preferred), or apply modest manual pressure to mid-belt span—deflection should be 6–10 mm under thumb force.
Reconnect battery, start engine, and run for 2 minutes. Listen for any belt chatter or chirp. If present, re-check tension and housing bolt tightness.
Road-test at varied RPM (1,200–4,000 rpm) for 15 minutes to confirm smooth belt tracking and no warning lights.
⚠️ Do not over-tension the belt. Excessive tension strains the alternator bearing and water pump seal, shortening their service life. Use a proper belt tension gauge if available. If belt slip occurs after 5 minutes of driving, stop immediately and re-tension.
Why Victorious Customers Choose This Tensioner
OEM Spec, No Compromise: We source direct from Tier-1 manufacturers who supply to Land Rover and Jaguar. Every tensioner is pressure-tested and bearing-certified before shipment.
Sealed Bearing Design: Unlike traditional split-ring tensioners, our sealed roller bearing resists moisture ingress and thermal cycling—critical in UK and European climates where humidity and temperature swing daily.
Factory Calibration: Spring rate and contact angle are matched precisely to the 2.0L Ingenium load curve. No guesswork, no fiddling with adjustment washers.
12-Month Full Warranty: Covers bearing wear, seal failure, and internal spring relaxation. Honored worldwide with no hassle.
Ready to Restore Belt Confidence?
A worn or failing drive belt tensioner isn't something to ignore. Alternator undercharge, water pump cavitation, and belt breakage are all real risks. Replace it now with factory-spec certainty.
Shop Drive Belt Tensioner
Use code 22GET20 for 20% off any 2 items.
4.9 / 5 – 12,300+ reviews
30-day money-back guarantee
Worldwide DHL shipping included
+44 203 943 9919 – Expert support
Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, or any subsidiary. Range Rover, Land Rover, Discovery, Defender, Evoque, and Jaguar are registered trademarks of Jaguar Land Rover Limited. All references are for fitment and compatibility purposes only. OEM and part numbers are cited for identification; this product is aftermarket and carries its own warranty independent of manufacturer coverage.
Rear Lower Engine Mount For Land Rover Freelander LR2 Range Rover Evoque 2012- Discovery Sport 2015- J9C1379 LR011835 LR039527
£ 154.53
```html
Victorious · Land Rover · Engine Mounts
Rear Lower Engine Mount for Land Rover LR2, Range Rover Evoque & Discovery Sport
OE-quality engine mount designed to eliminate vibration and restore NVH performance on Land Rover Freelander, Evoque, and Discovery Sport platforms.
LR2 / L538 / L540 / L558
2012–2024
Cast Metal
Direct Fit
OEM Quality
Overview
If your Land Rover Freelander LR2, Range Rover Evoque, or Discovery Sport is transmitting excessive engine vibration into the cabin—especially at idle or under light throttle—the rear lower engine mount is likely fatigued or degraded. This mount absorbs the primary fore-aft movement of your engine and gearbox assembly; when it fails, drivability suffers immediately.
This direct-replacement mount restores the original OEM specification and damping characteristics. Manufactured to match Land Rover factory tolerances, it uses a cast metal housing with a precisely tuned elastomer insert that absorbs vibration without transmission harshness. Installation is straightforward and requires no modification.
Fits all Evoque (L538, 2012–2019) and Discovery Sport (L558, 2015–2024) variants, as well as the Jaguar E-PACE (2017+) and Volvo S60/S80/V70/XC60/XC70 that share the same platform architecture.
What's Included
📦
Rear Lower Engine Mount
OEM-spec cast metal assembly with elastomer core
✓
OE Hardware
Fasteners and washers included
📋
Installation Guide
Torque specs and fitment notes
🛡
30-Day Guarantee
Money back, no questions asked
Product Highlights
Eliminates NVH transmission into cabin and steering column
Reduces engine rock at idle and light throttle
OEM material specification and damping curve
No vehicle modifications or drilling required
Drop-in replacement for original Land Rover mount
Preserves factory engine geometry and alignment
Tested across platform variants: Evoque, Discovery Sport, E-PACE, Volvo
Manufactured in ISO 9001 facility with rigorous QC
Backed by 30-day money-back guarantee
Ships worldwide via DHL, FedEx, UPS, TNT (2–5 days)
Compatibility
Vehicle
Year Range
Code
Fitment
Land Rover Freelander LR2
2007–2014
L350
Direct Fit
Range Rover Evoque
2012–2019
L538
Direct Fit
Range Rover Evoque (Facelift)
2019–2024
L540
Direct Fit
Land Rover Discovery Sport
2015–2024
L558
Direct Fit
Jaguar E-PACE
2017–2024
X540
Direct Fit
Volvo S60 / S80 / V70 / XC60 / XC70
2010–2018
DZ
Direct Fit
Part Numbers: J9C1379 · LR004511 · LR011835 · LR032311 · LR039527
Not sure? Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) with your VIN or registration plate. We'll confirm fitment instantly.
Installation Notes
Difficulty: Moderate | Time: 45–90 minutes
Disconnect battery negative terminal and allow engine to cool for 20+ minutes.
Safely support vehicle on jack stands. Do not work under a car supported only by a jack.
Locate rear lower mount at the engine/gearbox junction, beneath the bellhousing.
Remove fasteners securing mount to engine block and subframe (typically 3–4 bolts, 16–18mm socket).
Support engine with a block of wood and a separate jack under the sump, keeping tension light.
Extract old mount and clean seating surfaces with degreaser and lint-free cloth.
Install new mount hand-tight first, then torque to OEM spec (typically 45–55 Nm for this assembly).
Remove support jack and reconnect battery. Start engine and verify no vibration transmission.
Recheck all fasteners after 30 minutes of idle running.
⚠ Important: Engine mounts work in concert. If vibration persists after installation, have the front and rear gearbox mounts inspected. Do not overtighten fasteners—elastomer cores can tear if compressed beyond OEM spec.
Ready to Restore NVH?
Stop living with engine vibration. Swap in this OEM-spec mount and reclaim the refinement your Land Rover was engineered to deliver. Fits Evoque, Discovery Sport, LR2, and Jaguar E-PACE. Ships worldwide in 2–5 days.
Shop Now
Use code 22GET20 for 20% off any 2 items.
✓ 4.9/5 stars — 12,300+ verified reviews
✓ 30-day guarantee — money back, no questions
✓ Free support — +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar, or Volvo. All vehicle names, logos, and brands are registered trademarks of their respective owners. This product is an aftermarket accessory engineered to OEM specification and is not an official Land Rover product.
```
3.0 5.0 PETROL SECONDARY DRIVE BELT FOR RANGE ROVER 2013 RR SPORT 2014 ALL NEW DISCOVERY 4 DEFENDER 20- JAGUAR JDE37859 LR071040
£ 111.72
```html
Victorious · Range Rover & Discovery · Engine Belts
Secondary Drive Belt 3.0L / 5.0L Petrol – Range Rover, Discovery & Defender
OEM-specification serpentine belt for petrol engines. Direct replacement for water pump, alternator, power steering, and air compressor drive systems.
L460 Vogue
L405 Vogue
L494 Sport
L663 Defender
Discovery 4 & 5
3.0L V6 / 5.0L V8
2010–2026
OEM Fit
Overview
The secondary drive belt is the unsung backbone of your Range Rover or Discovery's engine compartment. Running your water pump, alternator, power steering pump, and air compressor, this serpentine belt endures constant heat, tension, and flexing—making it one of the most critical yet easily overlooked maintenance items.
This Partsmost replacement belt meets original Land Rover specifications (LR071040 / JDE37859) and fits all petrol models from the Discovery LR4 (2010–) through the latest Defender 2020–. Whether you're running a 3.0L V6 or 5.0L V8, this belt is engineered to deliver the exact tension, flexibility, and durability your engine expects.
Symptoms of belt failure—squealing on cold starts, slipping, or sudden loss of alternator output—demand immediate replacement. Don't risk being stranded. Install this belt now and reclaim reliable charging, cooling, and power steering performance.
What's Included
🔧
Secondary Drive Belt
OEM-specification serpentine belt
📋
Fitment Guide
Vehicle compatibility checklist
✓
12-Month Warranty
Full replacement coverage
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT
Product Highlights
OEM-Specification Design – Matches Land Rover original dimensions and rib profile exactly
Dual Engine Compatibility – Engineered for 3.0L V6 and 5.0L V8 petrol engines
High-Tension Construction – Resists slipping and maintains consistent power delivery
Premium Material Grade – Chloroprene rubber compound for heat and UV resistance
Serpentine Multi-Rib Design – Powers water pump, alternator, power steering, A/C compressor simultaneously
Direct Fit Installation – No modifications, no routing changes required
Factory Tension Settings – Pre-engineered for OEM tensioner compliance
Extended Service Life – Outlasts economy alternatives; typical lifespan 40k–80k miles
Chemical-Free Composition – Non-toxic, environmentally safe materials
Full Fitment Verification – Cross-reference LR071040 or JDE37859 before purchase
Compatibility Chart
Vehicle Model
Year Range
Engine
Fitment
Range Rover Vogue (L460)
2022–2026
3.0L V6 Petrol
Direct Fit
Range Rover Vogue (L405)
2013–2021
3.0L V6 / 5.0L V8
Direct Fit
Range Rover Sport (L494)
2014–2021
3.0L V6 / 5.0L V8
Direct Fit
Range Rover Sport (L461)
2022–2026
3.0L V6
Direct Fit
Defender (L663)
2020–2026
3.0L V6 / 5.0L V8
Direct Fit
Discovery 5 (L462)
2017–2026
3.0L V6
Direct Fit
Discovery 4 (L319)
2010–2016
3.0L V6
Direct Fit
Jaguar (OEM Cross-Reference)
2013–2020
Supercharged / Naturally Aspirated
Compatible
Installation Notes
Difficulty: Intermediate | Time: 1–2 Hours
Disconnect the negative battery terminal to prevent accidental short circuits during work.
Remove the plastic engine cover (if equipped) to access the belt and tensioner.
Photograph the belt routing diagram clearly before removal—located on the fan shroud or intake manifold.
Release tension by rotating the spring-loaded tensioner (usually 15mm bolt) counterclockwise with a wrench.
Slide off the old belt from all pulleys: crankshaft, water pump, alternator, power steering pump, air compressor.
Inspect all pulley surfaces for cracks, glazing, or misalignment. Replace damaged pulleys to prevent premature belt wear.
Route the new belt exactly as photographed, starting at the crankshaft and moving counterclockwise around each pulley.
Rotate tensioner back to allow slack, then slide the belt fully onto the final pulleys.
Release the tensioner slowly so it springs back to proper tension automatically.
Reconnect the battery, start the engine, and listen for squealing (indicating improper routing or tension).
Run for 5 minutes and recheck belt alignment and tension with a visual inspection.
⚠ Warning: Ensure all pulleys (especially the crankshaft damper) are spinning freely without wobbling. A misaligned crankshaft dampener will destroy a new belt in minutes. If you detect any unusual vibration or squealing after installation, stop the engine immediately and recheck belt routing.
Ready to Restore Engine Reliability?
A failing secondary drive belt isn't just an inconvenience—it's a roadside emergency waiting to happen. Replace it now with OEM-specification confidence, backed by our 30-day money-back guarantee.
Shop Secondary Drive Belts Now
Use code 22GET20 for 20% off any 2 items.
4.9/5 · 12,300+ Reviews
✓ 30-Day Money-Back
✓ Worldwide DHL/FedEx
☎ +44 203 943 9919
Disclaimer: Victorious Automotive is an independent aftermarket parts retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, Discovery, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed to fit the vehicles listed and is supplied as a direct replacement part. Always verify part numbers before purchase. Your satisfaction is guaranteed with our 30-day return policy.
```
THROTTLE BODY FOR 3.0 SDV6 TDV6 JAGUAR XF XJ LAND ROVER LR4 RANGE ROVER 2013- RR SPORT 2010 L320 L494 JDE33221 LR013102 LR079230
£ 580.27
Victorious Automotive · Range Rover · Engine Control
Throttle Body Assembly – 3.0 SDV6 / TDV6 for Range Rover Sport L494 & Discovery LR4
OEM-quality throttle body with integrated sensor—restores smooth throttle response and engine stability on 3.0-litre diesel Range Rovers, Land Rover Discovery 4, and Jaguar XF/XJ models.
L494 / L405 / LR4
2010–2019
3.0 SDV6 / TDV6
Direct Fit Replacement
Sensor Included
Overview
If your Range Rover Sport L494, Range Rover L405, or Land Rover Discovery 4 is showing hesitant throttle response, rough idle, or electronic fault codes related to the throttle pedal position, the throttle body assembly is often the culprit. This OEM-specification replacement throttle body restores precise electronic throttle control on the 3.0-litre SDV6 and TDV6 diesel engines fitted to these vehicles between 2010 and 2019.
This is the complete assembly—not just the housing. It includes the integrated electronic sensor (part number LR019130), stepper motor, and all internal components necessary for full compatibility with your vehicle's engine management system. Drop-in fitment; no recalibration required on most vehicles.
Whether you're addressing a fault code, replacing a worn original unit, or upgrading after engine work, this throttle body delivers OEM durability and sensor accuracy without the £600+ main dealer premium.
What's Included
⚙️
Throttle Body Assembly
Complete unit with valve, butterfly, and housing
🔌
Electronic Sensor
LR019130 – integrated position feedback
📦
Gaskets & Seals
New gasket kit included for leak-free installation
📋
Installation Guide
Fitment notes and torque specifications
Key Highlights
OEM-specification design & materials for 3.0 SDV6/TDV6 engines
Integrated electronic sensor—no separate TAP module needed
Direct bolt-on fit—zero modification or adaptation required
Restores throttle response and eliminates hesitation
Compatible with factory diagnostic systems—clear fault codes
Complete assembly—internal components pre-aligned and tested
Aftermarket brand option available—£150+ less than OEM
Includes new sealing gaskets & hardware kit
No recalibration needed on most vehicles—plug-and-play on L405 models
12-month warranty covering manufacturing defects
Compatibility
Vehicle
Years
Engine
Fitment
Range Rover Sport L494
2010–2013
3.0 SDV6
Direct Fit
Range Rover Sport L494
2014–2019
3.0 TDV6
Direct Fit
Range Rover Vogue L405
2013–2020
3.0 SDV6 / TDV6
Direct Fit
Land Rover Discovery 4 (LR4)
2010–2016
3.0 SDV6 / TDV6
Direct Fit
Jaguar XF
2009–2015
3.0 V6 Diesel
Direct Fit
Jaguar XJ
2010–2019
3.0 V6 Diesel
Direct Fit
Part Numbers Covered: LR181136 · LR079230 · LR076022 · LR049446 · LR029144 · LR013102 · JDE41568 · JDE39856 · JDE36160 · JDE33221 · C2P22732 · C2P26028 · C2C39673
Sensor Part Number: LR019130
Installation Notes
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect the negative battery terminal and wait 5 minutes for systems to power down.
Remove the engine cover and intake ducting to access the throttle body mounting bolts.
Disconnect the electronic connector from the old throttle body sensor.
Unbolt the throttle body from the intake manifold (typically 4 × M8 bolts—10 Nm).
Remove the old gasket and clean the manifold seating surface with a soft cloth.
Install the new gasket from the kit onto the manifold.
Lower the new throttle body assembly into place and hand-thread the bolts.
Tighten bolts in a cross pattern to 10 Nm (7 ft·lb) using a calibrated torque wrench.
Reconnect the electronic sensor harness—ensure it clicks fully home.
Reconnect the negative battery terminal.
Start the engine and allow it to idle for 60 seconds while the system relearns throttle position.
Clear any existing fault codes using a diagnostic scanner (optional but recommended).
Important: Do not force the electronic connector—it must click into place smoothly. If fault codes reappear after installation, the battery may need disconnecting for 30 minutes to allow the engine control unit to complete its relearn cycle.
Why Choose Victorious
We've spent over a decade specializing in Range Rover and Land Rover engine components. This throttle body assembly has been tested on dozens of L494, L405, and Discovery 4 vehicles. We stock both OEM and premium aftermarket brands so you can choose the right balance of quality and value. Every unit ships tested and includes our no-hassle 30-day money-back guarantee.
Ready to Restore Your Throttle Response?
Order now and enjoy smooth, responsive throttle control on your Range Rover Sport L494, Range Rover Vogue L405, or Land Rover Discovery 4. Free worldwide shipping. 30-day guarantee.
Shop Throttle Body Assembly
Use code 22GET20 for 20% off any 2 items
4.9/5 – 12,300+ verified reviews
🌍 Ships to 180+ countries
📞 +44 203 943 9919 – expert support
✅ 30-day money back guarantee
Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is compatible with the vehicles listed but is not an original manufacturer part. Warranty and liability are limited to the terms set out at checkout. Vehicle modification voids certain manufacturer warranties—check your vehicle's documentation before installation.
5.0L V8 PETROL AJ133 ENGINE MOUNT FOR LAND ROVER RANGE ROVER 2013- RANGE ROVER SPORT 2014- LR056882 LR054850
£ 205.50
```html
Victorious · Range Rover · Engine Components
5.0L V8 Petrol AJ133 Engine Mount for Range Rover & Range Rover Sport
OEM-specification engine mount system engineered to maintain vibration isolation and support integrity on fifth-gen Range Rover (L405) and Range Rover Sport (L494) 5.0L supercharged engines.
L405 | L494
2013–2020
5.0L V8 Petrol
Direct Fit
12-Month Warranty
Overview
The fifth-generation Range Rover (L405) and Range Rover Sport (L494) are powered by Land Rover's potent 5.0L supercharged V8 petrol engine—a formidable unit that demands precision engineering in its support systems. Engine mounts are critical to your vehicle's structural integrity: they isolate vibration, maintain engine geometry, and protect downstream systems from harmonic stress.
This complete engine mount assembly meets original equipment specifications and is engineered to the same tolerances as OEM components. When a factory mount deteriorates—whether through age, heat cycling, or extended high-performance driving—replacing it restores the engine's isolation characteristics and eliminates excessive vibration transmission to the chassis and cabin.
Built to survive the thermal demands and dynamic loads of a 510 hp powerplant, this mount delivers the durability your Range Rover deserves. Whether you're diagnosing a known vibration issue or performing preventative maintenance, this is the direct-fit solution trusted by Land Rover specialists worldwide.
What's Included
📦
Engine Mount Assembly
OEM-spec single unit, ready to install
✓
Installation Hardware
All fasteners and mounting brackets included
📋
Technical Documentation
Part numbers, torque specs, compatibility reference
🛡️
12-Month Warranty
Full coverage against manufacturing defects
Product Highlights
OEM-specification engineering meets original Land Rover tolerances
Engineered for 5.0L supercharged V8 dynamic loads and thermal cycles
Direct-fit installation—no modification or adapters required
Eliminates vibration transmission to chassis and cabin
Maintains engine geometry and drivetrain alignment
Tested for durability across temperature extremes
Complete assembly with all fasteners and hardware
Part numbers LR056882 and LR054850 cross-reference support
Backed by Victorious 30-day money-back guarantee
Worldwide shipping via DHL, FedEx, UPS, or TNT
Compatibility
Vehicle
Engine
Year Range
Fitment
Range Rover Vogue (L405)
5.0L V8 Petrol (AJ133)
2013–2017
Direct Fit
Range Rover Vogue (L405)
5.0L V8 Petrol (AJ133)
2017–2020
Direct Fit
Range Rover Sport (L494)
5.0L V8 Petrol (AJ133)
2014–2017
Direct Fit
Range Rover Sport (L494)
5.0L V8 Petrol (AJ133)
2017–2020
Direct Fit
Range Rover Velar
3.0L Diesel / Petrol
2018–2022
Not Compatible
Range Rover Evoque (L551)
2.0L Petrol / Diesel
2020–2026
Not Compatible
📌 Verify your vehicle code and engine type before ordering. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure about compatibility.
Installation Notes
⚙️ Installation Overview
Difficulty: Intermediate | Time: 1.5–2 hours | Tools: Jack stands, torque wrench, socket set, engine hoist (recommended)
Safely support the vehicle on jack stands. Do not work under a vehicle supported only by a jack.
Disconnect the negative battery terminal to isolate electrical systems.
Remove undertray and belly pan to access the engine mount location.
Support the engine block with a transmission jack and wooden block to prevent damage during removal.
Remove fasteners securing the old mount to the engine block and subframe.
Carefully lower the engine slightly to access the mount fully and withdraw it.
Position the new mount assembly and install fasteners finger-tight first.
Torque all fasteners to specification (consult technical documentation or contact us for exact values).
Slowly release transmission jack support and verify smooth engine settling.
Reconnect belly pan and undertray; reconnect battery terminal.
Start engine and verify smooth idle with no unusual vibration or noise.
⚠️ Critical: Engine mounts support several hundred pounds. Never remove all mounts simultaneously. Always use proper jack stands and engine support. Over- or under-torquing fasteners can cause mount failure or engine damage. If you lack mechanical experience, professional installation is strongly recommended.
Why Choose Victorious Automotive?
We've been the trusted partner for Range Rover and Defender enthusiasts for over a decade. Our engine components are hand-selected for quality and tested against OEM specification tolerances. Every mount ships with comprehensive documentation and full access to our technical team.
With a 4.9/5-star rating from over 12,300 verified reviews and a 30-day money-back guarantee, your satisfaction is assured. We ship worldwide via DHL, FedEx, UPS, or TNT, and our advisors are available Monday–Friday 9am–7pm GMT.
Ready to Restore Engine Isolation?
This OEM-spec engine mount for your 5.0L Range Rover or Range Rover Sport is in stock and ready to ship today. Eliminate vibration, protect your drivetrain, and enjoy the refined driving experience your vehicle deserves.
Shop Engine Components
Use code 22GET20 for 20% off any 2 items
✓
30-Day Money-Back Guarantee
✓
12-Month Warranty
✓
Worldwide Shipping
✓
Expert Support +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover PLC, or any official OEM distributor. Range Rover, Range Rover Sport, and all associated marks are trademarks of Jaguar Land Rover Limited. This product is engineered to OEM specification and meets performance tolerances but is not manufactured by or for the original equipment manufacturer.
```
8PCS 508PS 5.0T PETROL SC PISTONS WITH RINGS FOR AJ133 ENGINE LR100470 DISCOVERY LR4 RANGE ROVER RR SPORT JAGUAR XJ XF XK F-TYPE
from £ 1,039.81
Victorious · Engine Parts · Pistons & Rings
AJ133 5.0T Supercharged Piston & Ring Set – Discovery LR4 · Range Rover · Sport · Jaguar
Complete 8-piece piston assembly with OEM-spec rings for Land Rover and Jaguar supercharged engines. Direct replacement. 12-month warranty.
AJ133 Engine
5.0T Supercharged
2010–2017
OEM Direct Fit
Includes Rings
Overview
If you're running a Discovery LR4, Range Rover Sport, Range Rover, or Jaguar XJ/XF/XK with the 5.0T supercharged AJ133 engine, a failed piston or worn ring set demands immediate attention. Catastrophic engine damage follows quickly if ignored.
This 8-piece piston and ring assembly restores compression, oil control, and long-term durability to your engine. Engineered to OEM specifications (part number LR100470), each piston is manufactured to precise tolerances and paired with properly sized compression and oil control rings.
Available in standard bore, +0.25mm oversize, or +0.50mm oversize—choose based on your engine block condition. Fully assembled, tested, and ready to install. 12-month warranty included.
What's Included
🔧
8 × Pistons
AJ133 OEM spec, matched pair set
⭕
Compression Rings
8 sets included, pre-installed
💧
Oil Control Rings
8 sets included, pre-installed
📋
Installation Notes
Bore size & engine specs included
Product Highlights
OEM-equivalent specifications, AJ133-certified assembly
All 8 pistons matched for bore roundness and weight
Compression rings pre-gapped; oil rings pre-installed
Standard, +0.25mm, and +0.50mm bore sizes available
Compatible with Land Rover LR100470, LR104341, LR113583, LR113588
Fits 2010–2017 Discovery LR4, Range Rover, Range Rover Sport
Fits 2010–2017 Jaguar XJ, XF, XFR, XK, XKR, F-TYPE, XJR
Direct engine drop-in; no machine work required (with proper bore)
12-month manufacturer warranty; quality guaranteed
Ships with full documentation and torque specs
Compatibility Chart
Vehicle
Year
Engine
Fit
Land Rover Discovery LR4
2010–2013
5.0T Supercharged
Direct Fit
Land Rover Range Rover (L5)
2010–2017
5.0T Supercharged
Direct Fit
Land Rover Range Rover Sport (L494)
2010–2017
5.0T Supercharged
Direct Fit
Jaguar XJ (5.0T)
2010–2017
5.0T Supercharged
Direct Fit
Jaguar XF / XFR (5.0T)
2010–2015
5.0T Supercharged
Direct Fit
Jaguar XK / XKR (5.0T)
2010–2015
5.0T Supercharged
Direct Fit
Jaguar F-TYPE (5.0T)
2014–2017
5.0T Supercharged
Direct Fit
Jaguar XJR (5.0T)
2014–2017
5.0T Supercharged
Direct Fit
Note: Verify your engine block bore size before ordering. Standard, +0.25mm, and +0.50mm oversizes available. Confirm part number LR100470, LR104341, LR113583, or LR113588 on your engine.
Installation Overview
Difficulty Level: Advanced (Engine Removal Required)
Time Required: 6–10 hours (with experienced technician)
Remove engine from vehicle and secure on engine stand
Remove cylinder head and drain oil completely
Unbolt connecting rods and remove old pistons carefully
Clean cylinder bores and hone to proper finish (if oversize)
Install new pistons with rings; match rod orientation
Torque connecting rod bolts to OEM spec (typically 65–75 Nm, verify in documentation)
Reinstall cylinder head; torque to OEM sequence and spec
Prime engine with clean oil before starting
Reinstall engine and refill with OEM-spec 5W-30 synthetic oil
Run idle cycle; check for leaks and proper compression
Warning: This is a major engine assembly job. We recommend professional installation by a qualified Land Rover or Jaguar specialist. Improper piston installation can result in catastrophic engine failure, rod bearing damage, or complete engine seizure. Always refer to the factory service manual for your specific engine code and vehicle year.
Ready to Restore Your Engine?
Complete your AJ133 rebuild with factory-spec pistons and rings. OEM quality, 12-month warranty, fast worldwide shipping. Trusted by Land Rover and Jaguar specialists since 2013.
Add to Cart
Use code 22GET20 for 20% off any 2 engine parts.
4.9★ 12,300+ Reviews
✓ 30-Day Money Back
🚚 Worldwide DHL/FedEx
📞 +44 203 943 9919
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All product names, logos, and brands are the property of their respective owners. This product is designed for off-road and on-road use only. Always follow manufacturer installation guidelines and local safety regulations. Warranty excludes damage from improper installation, neglect, or misuse.
CAR DRIVE BELT FOR LAND ROVER RANGE ROVER EVOQUE DISCOVERY SPORT 2.0L 16V PETROL OEM DAYCO 6DPK2184 DRIVE BELT LR028851 LR066153
from £ 129.74
```html
Victorious · Range Rover Evoque / Discovery Sport · Engine Parts
Dayco Drive Belt for Range Rover Evoque & Discovery Sport 2.0L
OEM-specification serpentine belt engineered to restore crisp belt drive performance and eliminate squealing on your 2.0L petrol engine.
L538 / L551 Evoque
Discovery Sport
2012–2026
2.0L 16V Petrol
OEM Dayco
Overview
The Range Rover Evoque and Discovery Sport 2.0L petrol engines depend on a robust serpentine drive belt to power auxiliary systems—alternator, water pump, power steering, and air conditioning compressor. When the factory Dayco belt begins to age, cracking, fraying, or glazing will reduce grip, causing startup squealing, reduced alternator output, and potential accessory system failure.
This is the genuine Dayco 6DPK2184 belt—the same spec Land Rover engineers specified for these models. It features reinforced fabric backing, precisely molded ribs, and premium elastomer compounds to resist heat, ozone, and UV degradation. Direct fit means no modification, no hunting for the right tension, and no guesswork.
Whether you're addressing a worn belt on a 2012 Evoque or maintaining a newer Discovery Sport, a fresh Dayco belt restores efficient power transfer, quieter operation, and the reliability your Land Rover deserves.
What's Included
⚙️
1x Dayco Drive Belt
6DPK2184 / LR066153 / LR028851
📋
Fitment Guide
Part number cross-reference included
Product Highlights
OEM Dayco Engineering: Factory-specified belt used by Land Rover
6-Rib Design: Optimized groove pattern for positive grip and longevity
Heat & Ozone Resistant: Premium EPDM compound withstands engine bay temperatures
Direct Fit: No adjustment needed—exact OEM length and profile
Eliminates Squealing: Restores crisp, quiet belt drive operation
Proven Durability: 60,000–100,000 km typical service life
Alternator & AC Support: Full auxiliary system power and efficiency
Quick Install: Bolt-on replacement, no special tools required
Cross-Vehicle Compatibility: Fits both Evoque and Discovery Sport 2.0L
12-Month Warranty: Peace of mind backed by Victorious Automotive
Compatibility
Vehicle
Model Years
Engine
Fit Status
Range Rover Evoque L538
2012–2019
2.0L 16V Petrol
Direct Fit
Range Rover Evoque L551
2019–2026
2.0L 16V Petrol
Direct Fit
Land Rover Discovery Sport
2015–2026
2.0L 16V Petrol
Direct Fit
Range Rover Evoque Diesel
All
2.0L Diesel
Not Compatible
Discovery Sport Diesel
All
2.0L Diesel
Not Compatible
Confirm your part numbers match: LR066153, LR028851, or Dayco 6DPK2184. If unsure, message us your VIN and we'll verify fitment in minutes.
Installation Notes
Difficulty: Moderate | Time: 45–90 minutes
Disconnect the negative battery terminal to disable the alternator and prevent accidental shorting.
Locate the serpentine belt routing diagram on the underside of the hood or in your owner's manual.
Locate the belt tensioner (spring-loaded pulley). Insert a ratchet into the hex bolt and rotate to release tension.
Remove the old belt by sliding it off the alternator, water pump, crankshaft, and idler pulleys.
Inspect all pulleys for cracks, wear, or bearing noise. Replace any damaged pulleys before installing the new belt.
Route the new Dayco belt following the diagram exactly—improper routing will cause misalignment and premature failure.
While maintaining tensioner pressure, seat the belt around the crankshaft pulley first, then alternator, then remaining accessories.
Release the tensioner slowly to engage the belt. The tensioner spring should seat evenly; listen for a soft click.
Reconnect the battery terminal and start the engine. The belt should run smoothly and silently within 5 seconds.
⚠️ Critical: Do not operate the vehicle if the belt squeals continuously after installation. Stop immediately, re-check routing and tensioner alignment. A misaligned belt will fail within days.
Keep Your Evoque & Discovery Sport Running Strong
A worn belt is a silent threat to engine accessory reliability. Replace it now with Dayco's proven engineering and get the quiet, efficient power transfer your Land Rover was built for.
Shop Dayco Drive Belt
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ verified reviews
30-day money-back guarantee
Worldwide DHL/FedEx/UPS shipping
+44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover plc, or their parent companies. All vehicle names, logos, and part designations are for identification purposes only. This product is warranted to be free of defects in materials and workmanship for 12 months from the date of purchase. Warranty does not cover normal wear, improper installation, or misuse. Always verify fitment with your VIN before purchasing. Installation is at the purchaser's risk.
```
Intake / Exhaust Camshaft Sprocket Actuator for 2.0L Turbo Petrol New Discovery Range Rover Sport Velar Evoque LR091759 LR091760
from £ 296.44
Victorious · Engine · Camshaft Actuator
VVT Camshaft Sprocket Actuator – 2.0L Turbo Petrol (AJ200P)
Precision variable valve timing control for Land Rover and Jaguar 2.0L turbocharged engines.
AJ200P Engine
2014–2022
Metal Construction
Direct Fit
OEM Replacement
Why This Matters
The camshaft sprocket actuator is the heart of your engine's variable valve timing (VVT) system. It controls the precise opening and closing of intake and exhaust valves, directly affecting power delivery, fuel economy, and emissions. A worn or failing actuator causes rough idle, reduced responsiveness, and check engine lights.
This replacement unit maintains factory-correct VVT performance for 2.0L turbocharged Land Rover Range Rover Sport, Discovery, Velar, Evoque, and select Jaguar models. Available as intake actuator, exhaust actuator, or complete paired set.
Constructed from durable metal with precision engineering to original specification. Direct plug-and-play replacement—no modifications required. Backed by 30-day money-back guarantee and 12-month warranty.
What's Included
⚙️
Camshaft Sprocket Actuator
Intake or Exhaust – choose below
🔧
Installation Bolts
OEM-spec fasteners included
📋
Technical Documentation
Part numbers and fitment guide
Key Highlights
OEM-quality metal construction for durability
Variable valve timing precision control
Direct replacement—no engine modifications
Improves fuel efficiency and power response
Reduces emissions and check engine codes
Intake and exhaust versions available separately
Pair option for complete VVT system overhaul
Factory fitment for 2.0L Turbo Petrol (AJ200P)
12-month warranty included
Fits Range Rover Sport, Discovery, Velar, Evoque, Jaguar F-Type/XE/XF/F-Pace/E-Pace
Compatibility
Vehicle
Years
Type
Fit
Range Rover Sport
2014–2021
2.0L Turbo Petrol
Direct Fit
Discovery Sport
2015–2022
2.0L Turbo Petrol
Direct Fit
Land Rover Discovery (5th Gen)
2017–2022
2.0L Turbo Petrol
Direct Fit
Range Rover Velar
2017–2022
2.0L Turbo Petrol
Direct Fit
Range Rover Evoque (2nd Gen)
2019–2022
2.0L Turbo Petrol
Direct Fit
Jaguar F-Type
2014–2020
2.0L Turbo Petrol
Direct Fit
Jaguar XE
2015–2020
2.0L Turbo Petrol
Direct Fit
Jaguar XF
2016–2020
2.0L Turbo Petrol
Direct Fit
Jaguar F-Pace
2016–2021
2.0L Turbo Petrol
Direct Fit
Jaguar E-Pace
2017–2022
2.0L Turbo Petrol
Direct Fit
OEM Part Numbers Covered:
Intake: LR091759 · LR142279 · JDE38702 · JDE41016 · H4P36M288A2C · H6BG6C525AC
Exhaust: LR091760 · LR142281 · JDE38703 · JDE41018 · H4P36M288B2C · H4P36M288BB
Installation Guide
Difficulty Level: Moderate | Time: 1.5–2.5 hours
Disconnect battery – negative terminal first. Allow 10 minutes for systems to discharge.
Remove timing cover – unbolt and carefully lift away to access the camshaft sprocket.
Locate actuator – identify intake or exhaust unit at the camshaft pulley.
Remove old actuator – unbolt (usually 3–4 fasteners) and gently withdraw. Take a photo before removal for reference.
Clean mounting surface – wipe with lint-free cloth. No old gasket residue should remain.
Install new actuator – align splines, insert, and tighten bolts in a cross pattern to factory torque spec (typically 20–25 Nm).
Reconnect timing cover – refit all bolts and tighten evenly.
Reconnect battery – positive terminal first. Engine may run rough for 30 seconds as ECU relearns VVT parameters.
Clear fault codes – use OBD2 scanner to clear any stored DTC codes. Start engine and verify smooth idle.
Test drive – 10–15 minutes at varying loads to confirm VVT engagement and smooth throttle response.
⚠️ Important: Do not force the splines during installation. If resistance is felt, remove and inspect for debris. Always use factory-spec torque values and never reuse old bolts. If you are not comfortable with timing system work, have this performed by a qualified Land Rover or Jaguar technician.
Ready to Restore VVT Performance?
This OEM-quality camshaft sprocket actuator returns your 2.0L turbocharged engine to factory smoothness and efficiency. Whether you're dealing with rough idle, a check engine light, or preventive maintenance, this is the proven solution.
Shop Camshaft Actuators
Use code 22GET20 for 20% off when you buy any 2 items.
⭐ 4.9/5 from 12,300+ reviews
🚚 Worldwide shipping via DHL/FedEx
💰 30-day money-back guarantee
📞 +44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All product names, logos, and brands are the property of their respective owners. This product is an aftermarket replacement part designed to meet OEM specification. Fitment and performance validated independently. Vehicle compatibility subject to individual circumstances. Always verify part numbers before purchase.
Drive Belt Idler pulley Tensioner for 5.0L V8 Land Rover Range Rover 2013- RR Sport 2014- LR035542 LR035544 LR086058 LR035546
from £ 89.79
Victorious · Range Rover · Engine Parts
Drive Belt, Idler Pulley & Tensioner Kit – 5.0L V8 Range Rover / Sport
Factory-specification serpentine belt system for flawless V8 performance. Direct OE replacement for 2013+ Range Rover and 2014+ Range Rover Sport.
L405 / L494
2013–2020
5.0L Supercharged
Engine Critical
OE Spec
Complete Kit
Overview
The serpentine belt system on your 5.0L V8 Range Rover or Range Rover Sport is the circulatory backbone of your engine. It drives the alternator, power steering pump, and water pump—critical systems that demand precision engineering and flawless reliability.
This complete belt kit combines genuine OE-specification components: a reinforced primary drive belt (LR035542), precision-engineered idler pulleys (LR035544/LR086058), and a factory-matched belt tensioner (LR035546). Every piece is engineered to exact Land Rover tolerances, ensuring perfect tension, zero slip, and maximum component lifespan.
Whether you're replacing a worn belt proactively or addressing a failure, this kit delivers the robustness and longevity your V8 deserves. No compromise on accessory-driven performance.
What's Included
🔗
Primary Drive Belt
LR035542 – 6PK2447 profile, reinforced ribbing
⚙️
Idler Pulley
LR035544 / LR086058 / LR106769 – sealed bearing
🔧
Belt Tensioner
LR035546 / LR010756 – automatic spring mechanism
📋
Installation Guide
Step-by-step instructions with torque specs
Key Highlights
OE-equivalent tension and slip profile – zero accessory drag
Reinforced polymer composite – resists heat and UV degradation
Sealed bearing idler – extends service life to 100,000+ miles
Automatic spring tensioner – self-regulates throughout belt life
Tested on 5.0L SGDI SC (supercharged) engines – proven reliability
Drop-in fitment – no modifications or alignment required
Lower risk of serpentine failure – complete system replacement
Factory torque specifications included – professional installation standard
Works on Discovery LR4, Ranger Rover L405, Range Rover Sport L494
Peace of mind – 1-year manufacturer warranty
Vehicle Compatibility
Vehicle
Engine
Year Range
Status
Range Rover Vogue L405
5.0L SGDI SC V8
2013–2020
Direct Fit
Range Rover Sport L494
5.0L SGDI SC V8
2014–2020
Direct Fit
Range Rover Sport L494
3.0L V6 Petrol
2014–2020
Direct Fit
Discovery LR4
5.0L V8 Petrol
2010–2013
Direct Fit
Range Rover Vogue L405
3.0L V6 Petrol
2013–2020
Direct Fit
Not sure if this fits? Check your vehicle's part number against LR035542, LR035544, LR086058, or LR035546 in your service records. Or message our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) with your VIN and we'll confirm fitment in minutes.
Installation
Difficulty Level: Intermediate | Time: 45–90 minutes
Disconnect the negative battery terminal to disable the alternator and prevent accidental rotation.
Remove the plastic engine cover (if fitted) and locate the tensioner on the left side of the engine bay.
Rotate the tensioner counterclockwise using a 15mm socket to relieve tension on the old belt.
Carefully slide the worn belt off all pulleys: idler, alternator, power steering pump, water pump, and crankshaft.
Inspect all pulleys for cracks, misalignment, or bearing damage. Replace if necessary.
Install the new idler pulley (LR035544) using a 13mm socket. Torque to 45 Nm.
Install the new tensioner (LR035546) on the bracket. Torque the pivot bolt to 32 Nm and the locking bolt to 16 Nm.
Route the new belt exactly as shown on the under-hood diagram (usually affixed inside the bonnet). Start at the crankshaft pulley, working outward.
Rotate the tensioner counterclockwise again to create slack for final routing.
Verify the belt sits fully in every pulley groove – no twists, no cross-routing.
Release the tensioner slowly and allow it to auto-tension the new belt.
Rotate the engine by hand 2–3 complete revolutions to ensure the belt tracks straight and tensioner action is smooth.
Reconnect the battery terminal and start the engine. Listen for any squealing or rubbing for the first 10 seconds.
Let the engine idle for 5 minutes while observing the belt for slip or vibration.
⚠ Important: Over-torquing the tensioner bolt can damage the spring mechanism. Use a calibrated torque wrench set to the exact specification: pivot 32 Nm, lock 16 Nm. Do not attempt this on an engine that is hot—wait at least 30 minutes after shutdown.
Why This Matters
A worn or slipping serpentine belt doesn't just affect one system—it cascades across your entire engine bay. A failing belt forces the alternator to undercharge (dimming headlights, weak electronics), the power steering pump to lose pressure (heavy steering feel), and the water pump to slow (rising coolant temperature). You're one roadside breakdown away from a tow bill.
This complete kit eliminates that risk in one go. You're not patching a symptom; you're replacing the entire system to factory spec. Peace of mind worth far more than the cost.
Ready to Secure Your V8's Heart?
Order your complete serpentine belt kit today. We ship worldwide via DHL, FedEx, and UPS. Your 30-day money-back guarantee means zero risk.
Shop Drive Belt Kit Now
Use code 22GET20 for 20% off when you buy any 2 items
4.9/5 – 12,300+ verified reviews
30-day money-back guarantee
Worldwide DHL, FedEx, UPS shipping
1-year manufacturer warranty
Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Limited. All part numbers and OE references are used for compatibility identification only. Consult your vehicle's service manual or a qualified technician before installation. Improper installation may void your vehicle's warranty.
Aux Belt Tensioner For Land Rover Freelander LR2 Range Rover Evoque V-Ribbed Drive Belt Tensioner With Roller LR028880 LR034128
£ 143.20
Victorious · Multi-Vehicle · Engine Parts
Aux Belt Tensioner with V-Ribbed Roller – Land Rover Freelander LR2 | Range Rover Evoque
OEM-specification tensioner assembly with precision roller—maintains optimal serpentine belt tension for reliable ignition, charging, and accessory operation.
Freelander LR2 L359
Range Rover Evoque L538
Discovery Sport L550
2.0L Petrol Engines
2012–2015+
OEM Direct Replacement
12-Month Warranty
Overview
Whether you're pushing the Freelander LR2 through Welsh valleys or cruising in an Evoque around town, your auxiliary belt tensioner is working constantly. This component maintains precise pressure on the serpentine belt, which powers your alternator, power steering pump, and air-conditioning compressor. When it fails or wears, you'll notice charging issues, belt slippage, and eventual electrical instability.
Our replacement tensioner is engineered to OEM specifications and includes the original roller assembly—no simplified alternatives. It's designed for 2.0L petrol engines across the Freelander LR2 (L359), Range Rover Evoque (L538), and Discovery Sport (L550). Direct fit, no modifications required.
Partsmost delivers this as a complete unit with mounting hardware and detailed fitment documentation. A 12-month parts warranty covers defects, and our 30-day money-back guarantee ensures you can purchase with confidence. For Land Rover owners who demand reliability without compromise, this is the intelligent choice.
What's Included
🔧
Drive Belt Tensioner Assembly
Complete unit with precision roller, ready to install
📋
Installation Documentation
Fitment guide with OEM part number reference
🛡️
12-Month Warranty
Coverage against defects in materials and workmanship
✓
Mounting Hardware
All fasteners included; no additional purchases needed
Product Highlights
OEM-equivalent specification for Freelander LR2, Evoque, and Discovery Sport 2.0L petrol
Precision roller assembly maintains consistent belt pressure and eliminates slip
Direct replacement—no bracket modifications or re-engineering required
New condition with factory-sealed packaging and tamper-evident seals
Cross-compatible with Gates T39405 and INA 534059510 reference standards
Part numbers LR028880 and LR034128—verify against your vehicle documentation
Durable metal housing resists thermal cycling and vibration-induced failure
Zero chemical hazards; safe for all workshop and mobile technician environments
Backed by 30-day money-back guarantee from Victorious Automotive
Ships worldwide via DHL, FedEx, UPS, TNT with full tracking and signature
Compatibility Matrix
Vehicle Model
Years
Engine
Fit Status
Land Rover Freelander LR2 (L359)
2006–2014
2.0L 16V Petrol
Direct Fit
Range Rover Evoque (L538)
2012–2015
2.0L 16V Petrol
Direct Fit
Land Rover Discovery Sport (L550)
2015–2024
2.0L 16V Petrol
Direct Fit
Diesel or other engine variants
Any
Non-petrol
Not Compatible
⚠️ Verify your OEM part number before purchase. Check your service history or owner's manual. Cross-reference against LR028880 or LR034128. If uncertain, contact our team on +44 203 943 9919 (Mon–Fri 9am–7pm) with your VIN.
Installation
Difficulty: Intermediate | Time: 45–60 minutes
Disconnect the negative battery terminal and secure it away from the battery post.
Remove the serpentine belt using a 15mm wrench on the tensioner lock bolt. Rotate the tensioner anti-clockwise to relieve pressure, then carefully slide the belt off all pulleys. Mark the routing with a photo for reassembly.
Locate the tensioner mounting bolts (typically two M8 bolts on the engine block). Support the tensioner arm with one hand to prevent sudden spring release.
Remove the old tensioner by unbolting both fasteners in sequence. Lift the assembly clear and inspect the mounting surface for corrosion or damage.
Position the new tensioner onto the mounting brackets. Hand-thread both bolts to ensure correct alignment, then torque in sequence to 45 Nm (33 ft-lbs).
Reinstall the serpentine belt by routing it around the new tensioner roller first. Follow your reference photo. Rotate the tensioner anti-clockwise again to thread the final section under the crankshaft pulley.
Release the tensioner slowly—the spring will engage and apply pressure uniformly. Manually rotate the engine two full revolutions to confirm smooth operation.
Reconnect the battery and start the engine. Listen for belt noise (grinding, squealing) for 10 seconds. If silent, you're complete.
⚠️ Warning: Do not over-torque the mounting bolts—this can crack the tensioner housing. Use a calibrated torque wrench. If the belt continues to slip after installation, the belt itself may be worn and require simultaneous replacement.
Why Choose Victorious Automotive?
We specialise in Land Rover, Range Rover, and Defender accessories and service parts for owners who refuse to compromise on reliability or heritage. Every product is rigorously tested and sourced from OEM-equivalent suppliers. Our team has logged over 12,300 verified five-star reviews and maintains a 4.9/5 average rating—because your vehicle deserves nothing less.
Ready to Restore Charging System Stability?
Order this OEM-specification tensioner assembly now and enjoy a fully warranted, risk-free installation. Enjoy free worldwide delivery via DHL, FedEx, or UPS, and peace of mind with our 30-day money-back guarantee.
Shop Now
Apply code 22GET20 for 20% off any 2 items
✓ 30-Day Money Back
✓ Free Worldwide Shipping
✓ 4.9★ Verified Reviews
✓ 12-Month Warranty
Victorious Automotive is not affiliated with, endorsed by, or an official agent of Land Rover, Range Rover Evoque, or Jaguar Land Rover plc. All vehicle names, logos, and specifications are the property of their respective manufacturers and are used for identification and compatibility reference only. Product warranties are issued solely by Victorious Automotive and do not substitute for manufacturer coverage.
CRANKCASE VENT VALVE FOR 2.0T AJ200P LAND ROVER NEW RANGE ROVER EVOQUE DISCOVERY SPORT JAGUAR E-PACE JDE40122 LR094438 LR110464
£ 165.48
Victorious · Evoque · Engine
Crankcase Vent Valve for Range Rover Evoque & Discovery Sport 2.0T
OEM-spec vent valve for 2.0L turbocharged engines – direct replacement with 1-year warranty.
L538 / L551
2012–2026
AJ200P Turbo
Direct Fit
Cylinder Head
1-Year Warranty
Overview
The crankcase vent valve is a critical component in the Evoque's emission control system, responsible for routing blow-by gases back to the intake manifold while preventing oil mist from escaping. Over time, carbon buildup and normal wear reduce flow efficiency, causing rough idle, increased oil consumption, and potential engine damage.
This replacement vent valve fits the 2.0L turbocharged AJ200P engine found in the Range Rover Evoque (2012–2026), Discovery Sport (2015–2026), and Jaguar E-PACE. It meets OEM specifications and replaces parts LR110464, LR094438, JDE40122, and JDE39605 directly.
Restoring proper crankcase ventilation improves combustion efficiency, reduces emissions, and extends engine life—especially important in turbocharged engines running higher pressures.
What's Included
🔧
Crankcase Vent Valve
AJ200P cylinder head – OEM direct replacement
📋
Installation Guide
Step-by-step instructions included
✅
1-Year Warranty
Manufacturer defect coverage
🚚
Express Shipping
Worldwide via DHL, FedEx, UPS
Product Highlights
OEM-specification direct replacement for LR110464 & LR094438
Fits 2.0T AJ200P engines across Evoque, Discovery Sport, E-PACE
Reduces blow-by gases & improves combustion efficiency
Prevents oil mist escape & lowers emissions
Simple bolt-on installation at cylinder head
1-year manufacturer warranty on all defects
New condition – never used or refurbished
Fast worldwide shipping within 2–3 working days
Compatible with 2012–2026 Evoque (L538, L551)
30-day money-back guarantee from Victorious
Compatibility
Vehicle
Model Years
Engine
Fit
Range Rover Evoque (L538)
2012–2019
2.0L Turbo (AJ200P)
Direct Fit
Range Rover Evoque (L551)
2019–2026
2.0L Turbo (AJ200P)
Direct Fit
Discovery Sport (L550)
2015–2026
2.0L Turbo (AJ200P)
Direct Fit
Jaguar E-PACE
2017–2026
2.0L Turbo (AJ200P)
Direct Fit
Land Rover Discovery 3 & 4
2004–2015
Various (non-AJ200P)
Not Compatible
Range Rover Vogue (L405)
2013–2020
Various (non-AJ200P)
Not Compatible
Note: Always verify your engine code (AJ200P) before purchasing. Check your VIN or consult your service manual. Not sure? Contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT).
Installation
Difficulty Level
Intermediate – 45–90 minutes. No engine removal required, but cylinder head access needed.
What You'll Need
Torx bit set (T20, T25)
Socket set (metric)
Gasket scraper (plastic, not metal)
Gasket sealant (Loctite 243 or equivalent)
Engine oil (for refill if drained)
Steps
Disconnect the negative battery terminal to reset engine fault codes.
Allow engine to cool completely. Do not work on a hot engine.
Locate the crankcase vent valve on top of the cylinder head (passenger-side area).
Disconnect the hose clamp and carefully remove the intake hose.
Remove the old vent valve using appropriate sockets or Torx bits. Note orientation.
Clean the gasket surface on the cylinder head with a gasket scraper. Remove all old gasket residue.
Apply a thin bead of gasket sealant to the new valve seating surface.
Install the new vent valve, torque fasteners to OEM spec (typically 8–10 N⋅m).
Reconnect the intake hose to the vent valve outlet. Secure the hose clamp.
Reconnect the negative battery terminal. Start engine and check for leaks.
Clear any fault codes with a diagnostic scanner (optional but recommended).
⚠️ Important: If you have never removed cylinder head components, we recommend consulting your Haynes or Bentley manual, or having this work performed by a Land Rover-qualified technician. Improper installation can lead to oil leaks and engine damage.
Ready to Restore Engine Performance
Stop rough idle and oil consumption—install this OEM-spec crankcase vent valve today. Direct fit, 1-year warranty, shipped within 48 hours worldwide.
Shop Range Rover Evoque Parts
Apply discount code at checkout:
22GET20
20% off when you buy any 2 items
4.9★ 12,300+ reviews
30-day money-back guarantee
Worldwide DHL/FedEx/UPS
Expert UK support
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or a subsidiary of Jaguar Land Rover Ltd. or any of its parent companies. Land Rover, Range Rover, Discovery, Defender, and Evoque are registered trademarks of Jaguar Land Rover Ltd. This product is an independent replacement part and is not original equipment. Use is at the customer's discretion. Victorious Automotive assumes no liability for improper installation or misuse.
OEM 3.0 Diesel Alternator Drive Belt Pulley Tensioner For Land Rover Range Rover RR Sport Discovery 4 LR071038 LR036304 LR079293
£ 448.95
```html
Victorious · Land Rover Discovery · Engine Parts
OEM 3.0 Diesel Alternator Drive Belt, Idler Pulley & Tensioner Kit
Complete factory-spec serpentine belt assembly for 3.0L TDV6 engines. Direct-fit replacement with OEM quality and 1-year warranty.
Discovery 4 (2010–2016)
Range Rover (2013+)
Range Rover Sport (2014+)
3.0L Diesel TDV6
Rubber & Metal
Direct Fit
Overview
If you own a Discovery 4, Range Rover Vogue, Range Rover Sport, or newer Discovery with a 3.0-litre TDV6 diesel engine, the serpentine belt assembly is working hard every time you start the engine. The drive belt, idler pulley, and tensioner work as an integrated system to manage alternator output, power steering, air conditioning, and coolant circulation.
This OEM-spec kit delivers all three components together—drive belt (LR071038), idler pulleys (LR036304), and tensioner (LR079293)—so you're not swapping parts piecemeal. Engineered to OEM DAYCO KPV1435 standards, it restores proper belt tension and pulley alignment, eliminating slippage, noise, and premature wear.
Recommended if your engine shows signs of belt wear, pulley wobble, alternator undercharge, or if you're performing preventative maintenance at service intervals. Professional fitment takes 1–2 hours.
What's Included
🔗
Drive Belt (LR071038)
6PK1930S serpentine profile. Factory rubber blend with reinforced cord.
⚙️
Idler Pulley (LR036304)
APV4383. Qty: 2. Dual-bearing design. Smooth tracking, zero slack.
🎯
Tensioner (LR079293)
APV3900. Hydraulic-spring damped. Auto-adjusts belt tension under load.
📋
OEM DAYCO Kit Reference
KPV1435. Matched set. No compatibility mix-and-match needed.
Product Highlights
OEM specification and DAYCO engineering—same as factory-fitted parts
All three components matched and tensioned to work as one system
Rubber and metal construction designed for 3.0L TDV6 diesel torque curve
Eliminates belt slip, squealing, and undercharge faults
Restores alternator efficiency and power steering response
1-year manufacturer warranty. 30-day money-back guarantee from Victorious
Front-end engine bay fitment. No interior trim removal required
Sold as complete kit—purchase once, install once
Fits Discovery LR4, Range Rover L405, Range Rover Sport L494, Discovery 5, Range Rover Velar
Use OEM part numbers for insurance, dealer cross-reference, or resale documentation
Compatibility Matrix
Vehicle Model
Model Code
Years
Engine
Fit Status
Land Rover Discovery 4
LR4
2010–2016
3.0L TDV6
Direct Fit
Range Rover Vogue
L405
2013–2020
3.0L TDV6
Direct Fit
Range Rover Sport
L494
2014–2021
3.0L TDV6
Direct Fit
Land Rover Discovery 5
L462
2017–2024
3.0L TDV6
Direct Fit
Range Rover Velar
L560
2018–2023
3.0L TDV6
Direct Fit
Range Rover Sport Velar
L494 Velar variant
2019–2022
3.0L TDV6
Direct Fit
Range Rover Evoque
L538 / L551
2012–2020 / 2020+
2.0L Petrol / Diesel
Not Compatible
Other Models
—
—
Non-3.0L TDV6
Not Compatible
Note: Verify part numbers against your vehicle documentation before purchase. If uncertain, contact us with your VIN or vehicle registration and we'll confirm fitment.
Installation Guide
Difficulty: Intermediate | Time: 1.5–2 hours | Tools: Socket set, pulley holder, belt routing diagram
Disconnect battery negative terminal. Wait 10 minutes for residual electrical discharge.
Remove engine plastic cover if present. Locate the serpentine belt routing diagram (on radiator shroud or inner wing).
Release belt tension using the tensioner adjustment bolt. Rotate counterclockwise until belt slack permits removal.
Remove old belt by unthreading it from all pulleys. Do not force—work systematically.
Inspect all pulleys and tensioner housing for cracks, corrosion, or bearing play. Replace if damaged.
Install new idler pulleys (×2) if your old units show scoring or wobble. Use thread-lock compound on bolts.
Install new tensioner (LR079293). Align hydraulic piston rod. Hand-tighten, then torque to spec (typically 45 Nm).
Route new belt (LR071038) following the diagram. Ensure belt sits fully in all pulley grooves. No twisting.
Adjust tensioner until belt deflection at mid-span is 10–15 mm under thumb pressure. Lock tensioner bolt.
Reconnect battery. Start engine and listen for squealing. Run at idle for 2 minutes. Belt should bed-in silently within 50 miles.
⚠️ Important: Do not install the belt with the engine running. Ensure ignition is off and battery disconnected throughout fitment. Improper tensioning will cause premature wear and alternator undercharge. If unfamiliar with belt routing, download the Land Rover service manual or consult a qualified mechanic.
Ready to Restore Engine Efficiency?
This OEM DAYCO 3.0L diesel belt kit is engineered to factory spec and trusted by Discovery, Range Rover, and Range Rover Sport owners worldwide. Get the complete assembly now and drive with confidence.
Shop Now
Use code 22GET20 for 20% off when you order any 2 items.
⭐ 4.9 / 5 from 12,300+ reviews
🚚 Worldwide shipping via DHL, FedEx, UPS
🛡️ 30-day money-back guarantee
📞 Expert support: +44 203 943 9919
Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with Land Rover, Jaguar Land Rover (JLR), Jaguar, Tata Motors, or DAYCO. All part numbers, specifications, and compatibility information are provided for reference only. Vehicle fitment should be verified by qualified technicians or through official OEM documentation before installation. We assume no liability for incorrect fitment or damage resulting from installation error.
```
5.0 V8 Drive Belt Kit Primary Serpentine Belt LR064185 Secondary Belt LR012663 for Land Rover Discovery LR4 Range Rover RR Sport
from £ 82.92
Victorious · Discovery LR4 / Range Rover / Sport · Engine Parts
5.0L V8 Drive Belt Kit – OEM-Spec Serpentine & Secondary Belts
Factory-engineered replacement belt set for flawless power delivery on your 5.0L V8 engine.
LR4 / RR / Sport 2010–2013
5.0L V8 Petrol
Direct Fit
OEM-Equivalent
Dual Belt System
Overview
If you own a Land Rover Discovery LR4, Range Rover Full Size, or Range Rover Sport with the 5.0L V8 petrol engine, your drive belts are among the hardest-working components under the bonnet. These serpentine belts drive alternator, water pump, power steering, and air conditioning—simultaneously. When a belt begins to slip, fray, or crack, everything downstream suffers: electrical charging drops, coolant circulation weakens, and cabin comfort vanishes.
This Partsmost belt kit delivers direct-fit replacements engineered to OEM specification. You get a primary serpentine belt (LR064185) and secondary belt (LR012663)—the exact same units your vehicle shipped with. Installation is straightforward, and the performance gain is immediate: whisper-quiet operation, confident power steering response, and ice-cold A/C again.
Whether you're at 80,000 miles or 150,000, belt replacement is preventative maintenance that costs a fraction of the alternative. Keep your V8 running like factory-new.
What's Included
🔧
Primary Serpentine Belt
LR064185 / 6PK2457 – drives alternator, water pump, P/S, A/C
⚙️
Secondary Belt
LR012663 / 9H23-8620-FA – auxiliary cooling & component drive
📋
Installation Guide
Easy-to-follow reference with torque specs and routing diagram
✓
Partsmost Warranty
1-year manufacturer guarantee; 30-day money-back promise
Product Highlights
OEM-equivalent composition; passes Land Rover durability standards
Dual-belt system covers all 5.0L V8 accessory drives in one kit
Reduces serpentine slippage and restores alternator charging output
Quieter operation; eliminates squealing and noise on cold starts
Enhanced A/C compressor drive; faster cool-down cycles
Stronger power steering response under load and turning
Direct replacement—zero modification required; plug-and-play fit
Compatible with Discovery LR4, Range Rover L405, Range Rover Sport L494
Stable rubber compound; resists UV and ozone degradation
Trusted by LR specialists; used on thousands of V8 installations
Compatibility
Vehicle
Years
Engine
Fit Status
Land Rover Discovery LR4
2010–2013
5.0L V8 Petrol
Direct Fit
Range Rover Full Size (L405)
2010–2012
5.0L V8 Petrol
Direct Fit
Range Rover Sport (L494)
2010–2013
5.0L V8 Petrol
Direct Fit
Other Models & Engines
—
Non-V8 / Other Years
Not Compatible
Verify your VIN or engine displacement before purchase. Message us with your registration details if unsure.
Installation
Difficulty: Moderate | Time: 1–2 hours
Safety First: Disconnect the negative battery terminal. Allow engine to cool for 15–20 minutes.
Remove Trim & Guards: Detach plastic splash guards and trim pieces providing access to the belt runs. Mark their location with tape.
Locate Tensioner Pulley: Identify the serpentine belt tensioner (spring-loaded arm) on the driver side of the engine bay. This is your starting point.
Release Tension: Using a breaker bar, rotate the tensioner counterclockwise (relaxing spring pressure) and slide the old belt off all pulleys. Note the routing diagram on your fan shroud or owner's manual.
Inspect Pulleys: Check all pulleys—alternator, water pump, crank, power steering, A/C—for wear, cracks, or uneven wear patterns. Replace any damaged pulleys before installing new belts.
Install Primary Belt: Begin at the crank pulley. Route the new serpentine belt following the diagram, passing over alternator, water pump, power steering pump, and A/C compressor. Carefully thread it around each pulley.
Tension & Secure: Once fully seated, use the breaker bar to rotate the tensioner arm counterclockwise again, sliding the belt into the tensioner pulley. Release slowly; the spring should auto-tension the belt. If equipped with a manual tensioner bolt, tighten to factory spec (typically 25–35 Nm).
Install Secondary Belt: Repeat steps 4–7 for the auxiliary/secondary belt (LR012663), following its separate routing diagram.
Spin by Hand: Manually rotate the engine 3–4 full rotations (via crank bolt) to ensure belts track straight, don't slip, and clear all surrounds. Listen for rubbing or grinding.
Reconnect Battery & Test: Reconnect the negative battery cable. Start the engine and listen for 30 seconds. Belt noise should be minimal or absent. If chirping or squealing persists, recheck tension and pulley alignment.
Reattach Guards & Trim: Replace all plastic shrouding and trim in reverse order.
Final Check: Allow 5 minutes of idle running. Check alternator output (battery voltage should hold 13.5–14.5V). Confirm A/C and power steering are responsive.
⚠️ Belt Tension: Over-tightening causes premature bearing wear and pulley damage. Under-tensioning causes slippage and squealing. If unsure, consult a professional technician or use a belt tension gauge (typically 50–60 kg-force for serpentine drives).
Why Victorious?
We stock OEM-spec and premium-equivalent engine parts for every Discovery, Range Rover, and Defender model. Our team has fitted thousands of these kits; we know the fitment, the tolerances, and the real-world performance. Every product ships with our 30-day money-back guarantee and a full 1-year warranty.
Need Help? Call our specialist team at +44 203 943 9919 (Mon–Fri 9am–7pm GMT). We can confirm fitment, advise on ancillary replacements (tensioner, pulleys), or field any technical question—before or after your purchase.
Ready to Restore Your V8?
Belt replacement is one of the smartest preventative investments you can make. Enjoy whisper-quiet operation, restored charging output, and flawless A/C performance again.
Add to Cart
Use code 22GET20 for 20% off any 2 items.
✓ 30-Day Money Back
✓ 1-Year Warranty
✓ 4.9★ (12,300+ Reviews)
✓ Worldwide Shipping
Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. Product names and references are used for compatibility and identification purposes only. All trademarks are property of their respective owners. Always verify fitment with your vehicle's VIN before purchase.
5.0 PETROL ENGINE OVERHAUL GASKET SET FOR RANGE ROVER SPORT DISCOVERY VELAR LR026141 LR026142 LR010882 010789 LR043721 LR078819
£ 555.04
```html
Victorious · Multi-Fit · Engine Components
5.0L V8 Petrol Engine Overhaul Gasket Set
Complete gasket and seal kit for Range Rover, Range Rover Sport, Discovery, and Velar 5.0 petrol engines — factory-spec materials, guaranteed fit.
Range Rover L405
Range Rover Sport L494
Range Rover Sport L461
Discovery LR4
Range Rover Velar
2010–2026
OEM-Grade Seals
Overview
Whether you're performing a full engine overhaul on your Range Rover L405, Range Rover Sport L494/L461, Discovery LR4, or Range Rover Velar, this complete 5.0L V8 petrol gasket and seal set delivers the reliability and precision fit that serious Land Rover owners demand. Engineered to OEM specifications using proven materials, this kit includes every gasket, seal, and O-ring needed for a textbook engine rebuild.
Engine overhauls demand zero compromise. Inferior gasket sets lead to oil leaks, air ingress, coolant loss, and catastrophic engine damage. This set replaces original equipment from Land Rover (LR026141, LR026142, LR010882, LR010789, and more), matched to your exact engine architecture and torque specifications.
Comprehensive coverage. Professional-grade execution. The confidence that comes from knowing your investment is protected by a 30-day money-back guarantee and 12-month manufacturer warranty.
What's Included
🔲
RH & LH Cam Cover Gaskets
LR026141 & LR026142
🔲
Oil Pan Gasket Set
LR010882 & LR010789
🔲
Rocker Cover Seals
LR011220 & LR014345
🔲
Throttle Body & Plenum Gaskets
LR011585 & LR011586
🔲
Water Pump & Thermostat Seals
LR010706, LR010735, LR010770
🔲
Intake & Exhaust Manifold Gaskets
LR043721, LR048165, LR078819
🔲
PCV & Breather System Seals
LR012685, LR030593, LR049370
Why This Kit Matters
OEM-Spec Compounds — proven fluorocarbon and nitrile elastomers for extreme heat tolerance
Complete Coverage — every major sealing point from cam cover to oil pan, nothing left behind
Torque-Ready — gaskets pre-formed for correct crush, eliminating guesswork on final assembly
Dual-Bank Fitment — separate RH and LH components for symmetrical engine balance
Direct Replacement — matches OEM part numbers across all 5.0L platforms
Zero Remanufacturing — new-only components, never reconditioned or reclaimed
12-Month Warranty — manufacturer-backed durability from first mile
Multi-Generational Fit — compatible with 2010–2026 model year vehicles
Professional-Grade Packaging — color-coded seals and organized layout for assembly reference
Pressure-Tested — all gaskets validated at operating temperature and load before shipment
Compatibility Chart
Vehicle
Model Years
Engine Code
Fit Status
Range Rover Vogue
2010–2012
5.0L OHC SGDI NA V8
Direct Fit
Range Rover Vogue
2013–2020
5.0L OHC SGDI NA V8
Direct Fit
Range Rover Vogue L460
2022–2026
5.0L OHC SGDI SC V8
Direct Fit
Range Rover Sport
2014–2020
5.0L OHC SGDI SC V8
Direct Fit
Range Rover Sport L461
2022–2026
5.0L OHC SGDI SC V8
Direct Fit
Discovery LR4
2010–2016
5.0L OHC SGDI NA V8
Direct Fit
Range Rover Velar
2017–2022
5.0L OHC SGDI SC V8
Direct Fit
Defender 110 L663
2020–2026
5.0L OHC SGDI SC V8
Direct Fit
Always verify fitment: Cross-check your vehicle's VIN and original gasket part numbers against the OEM reference list before purchase. Contact us at +44 203 943 9919 if you're unsure.
Installation Notes
Difficulty: Advanced · Estimated Time: 16–24 hours
Engine overhauls require specialized tools (torque wrench, gasket scraper, compression tester), engine stand access, and intermediate mechanical experience. If unfamiliar with engine work, engage a qualified technician.
Drain fluids: Engine oil, coolant, and transmission fluid. Capture and dispose per local regulations.
Remove ancillaries: Air intake, throttle body, alternator, water pump, and intake manifold per FSM sequence.
Document teardown: Photograph and label all fastener locations, particularly cam cover and rocker cover bolts.
Clean mating surfaces: Use gasket scraper and isopropyl alcohol; ensure zero contamination before applying new gaskets.
Install gaskets: Follow OEM torque specs (typically 18–24 Nm for cam cover, 8–12 Nm for rocker covers). Apply fresh RTV to threaded holes per Land Rover specifications.
Torque sequence: Always work in a spiral or cross pattern to ensure uniform compression and seal integrity.
Pressure test: Once reassembled, run low-RPM idle for 10 minutes; inspect all gasket joints for weeping.
Final check: Verify coolant level, oil level, and electrical connections before full power-on.
Critical: Never reuse original gaskets. Even minor deformation or debris can cause leaks and internal damage. Use the complete new set provided.
Complete Your Engine Rebuild
Engine overhauls define the ownership experience. Spec the right parts from the start—no shortcuts, no comebacks, no regrets.
Shop Engine Gasket Sets
Use code 22GET20 for 20% off any 2 items
30-Day Money-Back Guarantee
12-Month Manufacturer Warranty
4.9★ 12,300+ Verified Reviews
Worldwide DHL · FedEx · UPS · TNT
Questions? Call our technical team: +44 203 943 9919 (Mon–Fri, 9am–7pm GMT)
Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover plc, or any OEM manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This description is for reference and informational purposes only. Always verify fitment with your vehicle's VIN and consult your owner's manual before installation.
```
3.0 V6 5.0 V8 SUPERCHARGED PRIMARY SECONDARY BELT FOR LAND ROVER DISCOVERY 4 RANGE ROVER RR SPORT NEW DEFENDER LR035543 LR011327
from £ 102.71
Victorious · Supercharged Engines · Belts & Pulleys
Supercharged Primary & Secondary Drive Belt for Range Rover, Discovery & Defender
OEM-specification serpentine belt engineered for 3.0L V6 and 5.0L V8 supercharged engines—direct replacement for critical drivetrain components.
LR035543 / LR011327
2010–2026
Supercharged
6DPK / 6PK Ribbed
Engine Parts
12-Month Warranty
Overview
The Range Rover, Range Rover Sport, Discovery 4, and Defender lineup rely on two critical serpentine belts to drive the supercharger, alternator, power steering, and air-conditioning compressor. As these components age, the primary (LR035543) or secondary (LR011327) belt degrades—cracking, fraying, or slipping under load. A failed belt can trigger limp-mode, loss of charging, steering assist, and complete system failure.
This belt set pairs OEM-specification 6-rib polyester construction with genuine tension profiles to match your supercharged engine's demand. Whether you run a 3.0L V6 or 5.0L V8 unit, these belts restore full accessory drive efficiency and eliminate noise, slip, and electrical strain.
Partsmost supplies both primary and secondary options as a single replacement or paired set—perfect for proactive maintenance or emergency repair. Aftermarket equivalent to OEM quality; backed by a 12-month warranty.
What's Included
🔩
Primary Drive Belt
LR035543 – 2355mm circumference
🔩
Secondary Drive Belt
LR011327 – 1444mm circumference
📋
Installation Guide
Component location & torque specs
✓
12-Month Warranty
Covers material defects & premature wear
Product Highlights
OEM-equivalent polyester 6-rib construction for all supercharged drivetrains
Precise tension profile eliminates slip and charging system strain
Dual-option availability: Primary (2355mm) or Secondary (1444mm)
Direct fit—no modification or custom routing required
Low-noise operation; engineered for Jaguar Land Rover specifications
Withstands supercharger boost demands and extreme thermal load
Factory OE number cross-reference (6PK2355 / 6DPK1444)
Aftermarket quality with proven long-term reliability
Quick-change design for workshop or DIY installation
Backed by expert UK technical support (+44 203 943 9919)
Compatibility Table
Vehicle Model
Year Range
Engine
Primary (LR035543)
Secondary (LR011327)
Range Rover Vogue
2013–2020
5.0L V8 SC
—
Direct Fit
Range Rover Vogue
2013+
5.0L V8 SC
Direct Fit
Direct Fit
Range Rover Sport
2010–2013
5.0L V8 SC
—
Direct Fit
Range Rover Sport
2014+
5.0L V8 SC / 3.0L V6 SC
Direct Fit
Direct Fit
Discovery 4 (LR4)
2009–2016
3.0L V6 SC
—
Direct Fit
Discovery 5
2017+
3.0L V6 SC
Direct Fit
—
Defender 110
2020+
5.0L V8 SC
Direct Fit
—
Note: Belt selection depends on your specific engine variant and model year. Before ordering, confirm your current part number (stamped on the existing belt or listed in your service record).
Installation Notes
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect battery – Negative terminal first to prevent accidental starter engagement.
Locate serpentine belt diagram – Found on the radiator fan shroud or inner engine cover (note routing before removal).
Release belt tension – Use a 15mm or 16mm socket on the automatic tensioner pivot bolt; rotate counterclockwise to relieve load.
Remove old belt – Slide off pulleys working from the largest pulley outward (alternator or crankshaft).
Inspect pulleys and tensioner – Check for wear grooves, glazing, or bearing noise. Replace if damaged or grinding.
Route new belt – Follow the diagram exactly; ensure even seating on all ribs and no twists.
Tension the belt – Rotate tensioner counterclockwise until the new belt seats fully. Do not over-tension (causes premature wear and pulley wear).
Reconnect battery and start engine. Listen for squealing or chirping; idle for 2 minutes to seat the belt.
⚠ Warning: Never attempt belt removal or routing with the engine warm or running. Always disconnect the battery before working on the supercharger drivetrain. If the automatic tensioner is faulty (belt re-slips after installation), replace it immediately—a worn tensioner will destroy a new belt.
Ready to Restore Supercharger Performance?
Whether your Range Rover, Discovery, or Defender has lost charging efficiency, developed belt noise, or thrown a drivetrain warning—this direct-fit replacement ends the guesswork. Ship worldwide via DHL, FedEx, or UPS. 30-day money-back guarantee. Expert support by phone Mon–Fri 9am–7pm.
Shop Belts & Pulleys
Code: 22GET20 — 20% off any 2 items
⭐ 4.9/5 – 12,300+ verified reviews
🚚 Worldwide shipping via DHL, FedEx, UPS
💬 Expert UK support +44 203 943 9919
✓ 30-day money-back guarantee
Victorious Automotive is not affiliated with Land Rover, Jaguar Land Rover, or Range Rover. Product names and part numbers are used solely for compatibility and identification purposes. LR035543, LR011327, 6PK2355, and 6DPK1444 are OEM reference numbers only. Always verify fitment with your vehicle identification number (VIN) before purchase. This is an aftermarket part equivalent to OEM quality, not a genuine Land Rover component.
3.0L PETROL INTAKE MANIFOLD GASKET FOR LR4 RANGE ROVER 13- RR SPORT 14- NEW DISCOVERY VELAR JAGUAR XJ XE XF LR041680 or LR041681
from £ 169.30
Victorious · 3.0L Petrol Engines · Engine Gaskets
3.0L Petrol Intake Manifold Gasket for Land Rover & Jaguar
Direct replacement upper or lower gasket for Land Rover Discovery, Range Rover, and Jaguar sports cars with 3.0L V6 petrol engines.
LR041680 / LR041681
Discovery LR4 / RR Sport L494
Range Rover L405
Jaguar XF / XJ / XE
2010–2019
Premium Gasket Material
Overview
If you own a Land Rover Discovery LR4, Range Rover (2013+), Range Rover Sport (2014+), or Jaguar with a 3.0L DOHC GDI supercharged V6 petrol engine, intake manifold gasket failure will eventually occur. Symptoms include vacuum leaks, rough idle, check engine light, and reduced fuel economy. This is a wear item—not a question of if, but when.
This intake manifold gasket kit offers a direct replacement for either the upper or lower gasket position. OEM-equivalent specification ensures proper sealing, thermal stability, and compatibility with your engine bay. Available in both upper (LR041680) and lower (LR041681) configurations, so you can repair one gasket or both simultaneously to prevent future issues.
Installation is straightforward for owners with basic mechanical skill; service can be completed in 1–2 hours with standard hand tools. This is a cost-effective preventive maintenance item that will eliminate vacuum leaks, restore smooth idle, and extend engine component life.
What's Included
✓
Upper or Lower Gasket
Genuine OEM-spec replacement
📋
Installation Notes
Detailed service steps included
🛠
Tool List
Everything you need to know
30
30-Day Guarantee
Money-back, no questions asked
Product Highlights
OEM Specification: Meets all original equipment dimensions, material, and thermal ratings
Vacuum Seal Performance: Eliminates intake leaks and rough idle conditions instantly
Heat Resistance: Engineered for 3.0L supercharged V6 operating temperatures (120–150°C)
Long Service Life: Premium gasket material resists oil saturation and deformation
Direct Fit, No Modification: No trimming, no filler, no guessing—drops straight in
Upper and Lower Options: Choose single gasket repair or do both for maximum reliability
Fits Multiple Models: Land Rover Discovery, Range Rover, Jaguar XF/XJ/XE, and more
Affordable Preventive Maintenance: Fraction of the cost of engine damage from vacuum leaks
UK-Based Support: Phone +44 203 943 9919 Mon–Fri 9am–7pm for fitment advice
Worldwide Shipping: DHL, FedEx, UPS—typically 3–7 working days
Compatibility Matrix
Vehicle Model
Years
Engine
Fit
Land Rover Discovery LR4
2010–2016
3.0L DOHC GDI SC V6
Direct Fit
Range Rover Vogue (L405)
2013–2021
3.0L DOHC GDI SC V6
Direct Fit
Range Rover Sport (L494)
2014–2021
3.0L DOHC GDI SC V6
Direct Fit
Land Rover Discovery (2017+)
2017–2019
3.0L DOHC GDI SC V6
Direct Fit
Range Rover Velar
2017–2022
3.0L DOHC GDI SC V6
Direct Fit
Jaguar XF (2009–2015)
2009–2015
3.0L DOHC GDI SC V6
Direct Fit
Jaguar XJ (2010–2019)
2010–2019
3.0L DOHC GDI SC V6
Direct Fit
Jaguar F-TYPE (2014+)
2014+
3.0L DOHC GDI SC V6
Direct Fit
Jaguar XE (2015+)
2015+
3.0L DOHC GDI SC V6
Direct Fit
Jaguar F-PACE (2016+)
2016+
3.0L DOHC GDI SC V6
Direct Fit
Note: Part numbers vary by position. Upper gasket = LR041680 (C2Z17248). Lower gaskets = LR041681 (C2Z17249). Verify your original part number before purchasing.
Installation & Service
Upper or Lower Intake Manifold Gasket Replacement
Difficulty: Intermediate | Time: 1–2 hours | Tools Required: Standard socket set, torque wrench, gasket scraper, new fasteners
Disconnect battery and allow engine to cool completely. Remove battery negative terminal to prevent accidental starting.
Remove intake manifold cover (if equipped) and locate gasket position—upper sits between manifold and cylinder head; lower sits between manifold runners and cylinder block.
Unbolt manifold carefully. Use a socket set to remove all fastening bolts. Keep bolts organized by location; they may vary in length.
Clean gasket surfaces. Use a plastic gasket scraper to remove all old gasket material and carbon buildup. Do not gouge or scratch mating surfaces.
Install new gasket. Position gasket carefully onto clean surface. Ensure all bolt holes align and gasket sits flat without twisting.
Torque fasteners to specification. Reinstall bolts in sequence (typically center to edge, then outward). Torque wrench is essential—over-tightening can warp manifold.
Reconnect fuel rail, intake hoses, and electrical connectors. Double-check all connections before starting engine.
Start engine and listen for vacuum leaks. Rev to 2000 RPM and listen for hissing. Idle should be smooth and consistent.
Clear check engine light (if present) using OBD2 scanner or by disconnecting battery for 15 minutes.
⚠ Important: If you are not confident with gasket replacement, we strongly recommend professional installation. Improper gasket seating or torque sequencing can lead to vacuum leaks, misfires, and check engine codes. Victorious offers specialist installation guides—contact us at +44 203 943 9919 for detailed walk-throughs.
Why Choose This Gasket Kit
Vacuum leaks are the silent killer of 3.0L petrol performance. When intake manifold gaskets age and fail, they allow unmetered air into the combustion chamber, lean out the fuel mixture, and cause rough idle, hesitation, and increased emissions. This gasket directly prevents that issue by restoring a perfect seal between the manifold and cylinder head.
Unlike cheap aftermarket options, this kit is engineered to OEM specification. The material composition, thickness, and thermal rating match the original equipment exactly—meaning it will survive 100,000+ miles of supercharged V6 operation without degradation.
Installation is within the skill level of any owner with a socket set and basic mechanical confidence. Victorious includes detailed installation notes, and our specialist team is available via phone Monday–Friday if you have questions during service.
Ready to Restore Your Engine Seal?
Eliminate rough idle, vacuum leaks, and check engine lights with this direct replacement 3.0L intake manifold gasket. OEM-spec, proven quality, backed by 30 days money-back guarantee.
Shop Engine Gaskets
Use code 22GET20 for 20% off any 2 items
✓ 30-Day Guarantee
✓ 4.9★ Rated (12,300+ reviews)
✓ UK Support +44 203 943 9919
✓ Worldwide Delivery
Victorious Automotive is an independent specialist in Land Rover, Range Rover, Defender, and Jaguar accessories. We are not affiliated with, endorsed by, or authorized by Jaguar Land Rover Ltd. or Jaguar Cars Ltd. "Land Rover," "Range Rover," "Discovery," "Defender," and "Jaguar" are registered trademarks of Jaguar Land Rover Limited. All product names, logos, and trademarks mentioned are the property of their respective owners. This product is sold as a replacement part; fitment and compatibility remain the responsibility of the buyer. Always verify part numbers and vehicle identification before purchase.
5.0L PETROL VALVE COVER GASKET LR010882 LR010789 SPARK PLUG HOLE SEAL LR011220 LR014345 FOR LR4 RANGE ROVER SPORT VELAR DEFENDER
from £ 49.71
Victorious Automotive · Multi-Vehicle · Engine Seals
5.0L Petrol Valve Cover Gasket & Spark Plug Hole Seals
OEM-spec engine bay sealing kit for Range Rover, Range Rover Sport, Defender, Velar, and Discovery—eliminates oil weeping and restores engine integrity.
LR4 / L405 / L494 / L460 / L461
2010–2026
5.0L V8 Petrol
OEM-Spec Rubber
Direct Fit
The Challenge
Valve cover gaskets and spark plug hole seals on 5.0L petrol engines degrade over time, allowing oil to seep into the engine bay and around the spark plug wells. Left unchecked, this leads to oil buildup, potential electrical corrosion, and rough idle conditions. Original seals harden in the heat and lose their compression after 50,000–80,000 miles.
Our Solution
This complete gasket and seal kit replaces both the main valve cover gasket and all four spark plug hole seals with OEM-specification rubber compounds. Compatible across a broad range of 5.0L naturally aspirated and supercharged Land Rover powertrains, this kit delivers the same factory performance at a fraction of the cost—with no modifications required.
Why It Works
Victorious Automotive sources OEM-profile gaskets moulded to the exact dimensions of the original Land Rover parts. The rubber formulation resists thermal cycling, maintains compression under boost, and seals reliably in both ambient and engine bay temperatures. One kit covers both sides of the engine, so you'll eliminate oil weeping in one service.
What's Included
🔧
Valve Cover Gasket (RH)
LR010882 or LR011220 profile
🔧
Valve Cover Gasket (LH)
LR010789 or LR014345 profile
⚙️
Spark Plug Hole Seals (×4)
RH bank, OEM rubber
⚙️
Spark Plug Hole Seals (×4)
LH bank, OEM rubber
Product Highlights
OEM-specification rubber; factory compression profiles
Fits naturally aspirated and supercharged 5.0L units
Eliminates oil weeping at valve cover and spark plug wells
One-service solution for both engine banks
No custom machining or modification needed
Temperature stable from –20°C to +130°C under load
Sourced from Tier-1 Chinese OEM supplier
Approved for Discovery, Range Rover, Defender lineups
12-month parts warranty included
Outperforms budget aftermarket; matches OEM quality
Compatibility
Vehicle
Years
Engine
Fit Status
Range Rover (Vogue)
2010–2012
5.0L NA V8
Direct Fit
Range Rover (Vogue)
2013–2020
5.0L NA V8
Direct Fit
Range Rover Sport
2014–2021
5.0L SC V8
Direct Fit
Range Rover Velar
2017–2022
5.0L SC V8
Direct Fit
Land Rover Discovery LR4
2010–2016
5.0L NA V8
Direct Fit
Land Rover Defender
2020–2026
5.0L SC V8
Direct Fit
Not all variants listed above come in every kit option. Select your specific vehicle code and year range at checkout to confirm exact part numbers (LR010882, LR010789, LR011220, LR014345).
Installation Notes
Difficulty: Intermediate | Time: 2–3 hours per bank
Disconnect battery negative terminal and allow engine to cool to ambient temperature.
Remove coil pack assemblies from both valve covers (note orientation).
Unbolt valve cover using a 10mm socket; remove old gasket and inspect mating surface.
Clean mating surface thoroughly with degreaser and lint-free cloth; no residue.
Position new gasket on the cover; do not use sealant unless specified by gasket edge.
Reinstall valve cover bolts in a crisscross pattern; torque to 8–10 N⋅m (6–7 ft⋅lbf).
Replace spark plug hole seals by carefully pressing new rubber seals into each well (hand pressure only).
Reinstall coil packs and torque to spec (typically 4–5 N⋅m).
Reconnect battery and start engine; check for oil leaks at idle and under light load for 5 minutes.
⚠ Torque Warning: Over-tightening valve cover bolts can crack the cover or strip threads. Use a calibrated torque wrench and tighten in a star pattern. If you're unsure of your torque spec, consult your service manual or a qualified technician.
Warranty & Support
12-month parts warranty covers defective gaskets or seals due to manufacturing fault. We do not cover damage from over-torquing, incorrect installation, or use of incompatible sealants. If you have any fitment questions before purchasing, call us at +44 203 943 9919 (Mon–Fri 9am–7pm) or message with your VIN.
Ready to Seal Your Engine Bay?
Stop oil weeping and restore your engine's factory integrity with OEM-spec valve cover gaskets and spark plug hole seals. Choose your vehicle code, order today, and enjoy 30 days to make sure it's a perfect fit.
Shop Gasket Kits Now
Use code 22GET20 for 20% off any 2 items
4.9/5 — 12,300+ verified reviews
30-day money-back guarantee
Worldwide DHL, FedEx, UPS, TNT shipping
Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Defender, or Discovery brands. All product names, logos, and trademarks are the property of their respective owners. This product is offered as an aftermarket alternative for repair and maintenance purposes only.
3.0 PETROL ENGINE OVERHAUL GASKET SET FOR RANGE ROVER SPORT DISCOVERY VELAR LR105300 105301 LR041681 41868 41869 043721 LR078819
£ 534.41
Victorious · Multi-Model · Engine Gaskets
3.0L Petrol Engine Overhaul Gasket Set
Complete factory-spec gasket kit for 3.0 DOHC GDI SC V6 engines — ensures perfect seal and reliability.
3.0L V6 Petrol
2010–2022
OEM Compatible
Direct Fit
12-Month Warranty
Overview
This engine overhaul gasket set is engineered for Land Rover's proven 3.0L DOHC GDI supercharged V6 petrol engine, used across Discovery LR4, Range Rover (L405), Range Rover Sport (L494), and the all-new Discovery and Velar platforms. Whether you're rebuilding a high-mileage engine or refreshing seals after major work, this comprehensive kit delivers OEM-grade reliability without compromise.
The set includes all critical gaskets—cylinder head covers, oil pan, intake manifold, and auxiliary components—each precision-cut to factory tolerances. Constructed from premium materials with excellent temperature and fuel resistance, every gasket is engineered to maintain a perfect seal under boost and sustained load.
Designed by Partsmost and built to direct-fit OEM specifications, this kit eliminates the need for sourcing individual gaskets piecemeal. One complete order covers your entire engine seal refresh, reducing installation time and ensuring consistent quality across all contact surfaces.
What's Included
🔧
Cylinder Head Covers
RH & LH, complete sealing
⛽
Oil Pan Gasket
Full perimeter seal
💨
Intake Manifold Gaskets
Boost-rated materials
🔩
Auxiliary Gaskets
All remaining seals included
Product Highlights
OEM-spec materials engineered for 3.0 DOHC GDI SC V6
Covers Discovery LR4, Range Rover L405, Sport L494, Velar, Discovery 2017+
Temperature stable up to 200°C continuous operation
Fuel and coolant resistant across all contact surfaces
Factory precision-cut to eliminate custom fitting
Complete kit—no hunting for individual gaskets
12-month manufacturer warranty on all components
Direct replacement for OEM part numbers LR105300, LR105301, LR041868, LR041869
Ideal for engine rebuilds, high-mileage refresh, or major service
Reduces leak risk and improves engine stability long-term
Compatibility
Vehicle Model
Year Range
Engine
Fit Status
Land Rover Discovery LR4
2010–2016
3.0 DOHC GDI SC V6
Direct Fit
Range Rover Vogue L405
2013–2022
3.0 DOHC GDI SC V6
Direct Fit
Range Rover Sport L494
2014–2022
3.0 DOHC GDI SC V6
Direct Fit
Land Rover Discovery 5 (L462)
2017–2022
3.0 DOHC GDI SC V6
Direct Fit
Range Rover Velar
2017–2022
3.0 DOHC GDI SC V6
Direct Fit
Discovery Sport (all years)
N/A
Other engine sizes
Not Compatible
Defender (all years)
N/A
Non-3.0L engines
Not Compatible
Part Numbers Covered: LR041640, LR041641, LR041868, LR041869, LR011220, LR014345, LR041681, LR010706, LR010735, LR010770, LR043721, LR048165, LR078819, LR012685, LR030593, LR049370
Installation
Difficulty: Advanced | Time: 4–6 hours
Professional engine work recommended. Requires removal of intake manifold, oil pan, and cylinder head covers.
Disconnect negative battery terminal; allow engine to cool fully.
Drain engine oil into a suitable container; remove oil pan and gasket.
Remove intake manifold and associated gaskets from cylinder head.
Unbolt cylinder head covers (RH and LH); lift off old gaskets.
Clean all gasket surfaces thoroughly with appropriate solvent; allow to dry.
Install new gaskets in reverse order, torquing per OEM specification (typically 8–12 Nm).
Refill oil to specification; reinstall drain plug and tighten.
Reconnect battery; start engine and check for leaks at all seal points.
Allow engine to idle 10 minutes; recheck gasket seals for any weeping.
Clear any diagnostic codes if triggered; perform test drive to confirm stability.
⚠ Important: Do not reuse old gaskets. Always clean contact surfaces meticulously—residual gasket material or debris will cause premature leaks. Refer to your vehicle's service manual for torque specs and tightening sequence. If you're unfamiliar with engine work, have a qualified technician perform the installation.
Ready to Refresh Your Engine?
Whether you're tackling a major rebuild or preventive maintenance on a high-mileage Land Rover, this complete gasket set delivers OEM quality without the Land Rover dealer price tag.
Shop Engine Gasket Set
Save 20% on any 2 items: Use code 22GET20 at checkout.
4.9★ Rating · 12,300+ Reviews
30-Day Money Back · No Questions
Worldwide Shipping · DHL / FedEx / UPS
Expert Support · +44 203 943 9919
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is engineered for compatibility and is sold as an aftermarket replacement part. Always verify fitment with your VIN before purchase. Warranty excludes damage from improper installation, misuse, or accident.
3.0L V6 DIESEL THROTTLE BODY HOUSING & MOTOR FOR LAND ROVER RANGE ROVER SPORT VELAR ALL NEW DISCOVERY JAGUAR JDE39855 LR078546
£ 483.26
Victorious · Range Rover / Land Rover · Engine Control
3.0L V6 Diesel Throttle Body Housing & Motor
Factory-spec throttle body assembly with integrated motor and sensor for 3.0L V6 diesel powerplants across Range Rover Sport, Range Rover Velar, Discovery, and Jaguar platforms.
L494 / L494E
L560 / L561
L550
2015–2022
OEM-Spec
Direct Replacement
Vehicle Application
This throttle body housing and motor assembly is engineered for Land Rover's premium 3.0L V6 diesel engine family, serving as the critical intake control valve across a broad range of performance and luxury SUVs.
Compatible Range Rover & Land Rover Models:
Range Rover Sport (L494) 2015–2022
Range Rover Velar (L560) 2017–2023
Range Rover Vogue (L405 TDV6) 2013–2020
Land Rover Discovery 5 (L550) 2017–2023
Jaguar XF / XJ (TDV6 variants)
The throttle body regulates intake air volume to the diesel engine, working in concert with the engine control module (ECM) to optimize fuel injection timing, emission control, and power delivery across all driving conditions.
What's Included
⚙️
Throttle Body Housing
Cast aluminium body with integrated intake valve
🔌
Electric Motor Assembly
Stepper motor with factory calibration
📡
Position Sensor (LR077148)
Integrated potentiometric feedback sensor
⚡
Pre-Assembled Harness
OEM-type electrical connector, ready to fit
Key Highlights
Factory-spec engineering meets OEM part numbers LR078546 and JDE39855
Direct plug-and-play replacement—no ECM coding required
Integrated stepper motor delivers precise intake valve positioning
Position sensor feedback ensures real-time ECM communication
Cast aluminium construction resists thermal stress and corrosion
Optimises fuel atomisation, emission control, and idle stability
Compatible across diesel and hybrid TDV6 variants
1-year manufacturer warranty against defects
100% tested before dispatch from our UK warehouse
Backed by Victorious 30-day money-back guarantee
Compatibility Overview
Vehicle
Model Code
Year Range
Fit Status
Range Rover Sport
L494 TDV6
2015–2022
Direct Fit
Range Rover Sport
L494 MHEV
2018–2022
Direct Fit
Range Rover Velar
L560 TDV6
2017–2022
Direct Fit
Range Rover Vogue
L405 TDV6
2013–2020
Direct Fit
Land Rover Discovery 5
L550 TDV6
2017–2023
Direct Fit
Jaguar XF
X260 TDV6
2015–2020
Direct Fit
Jaguar XJ
C2D33 TDV6
2015–2020
Direct Fit
⚠️ Verify fitment: Always confirm your engine code (TDV6, MHEV, or Hybrid) and model year before ordering. Contact us with your VIN for certainty.
Installation Notes
Difficulty: Intermediate | Time: 45–90 minutes
Disconnect the battery negative terminal and allow the engine to cool for 30 minutes.
Remove the engine cover by unclipping fasteners and gently lifting clear.
Disconnect the electrical harness from the faulty throttle body by pressing the release tab and sliding backward.
Remove the intake plenum bolts (typically 4 × M8 fasteners). Keep fasteners in a labelled container.
Carefully lift the old throttle body clear, noting the gasket position and any vacuum hose connections.
Clean the intake plenum mounting surface with a soft cloth and IPA to remove carbon residue and old gasket material.
Install a new gasket (not included; recommend OEM reference GJ32-9D381-AA or equivalent) onto the plenum.
Position the new throttle body over the gasket and engage the mounting holes.
Insert and hand-tighten all bolts evenly, then torque to 10–12 N⋅m in a star pattern.
Reconnect the electrical harness until the clip seats firmly with an audible click.
Reconnect any vacuum hoses in their original positions (reference photos taken before removal).
Refit the engine cover and secure all clips.
Reconnect the battery and start the engine.
Allow the ECM to relearn idle parameters over 2–3 minutes of gentle running. Do not drive aggressively until the system has stabilised.
⚠️ Warning: Throttle body replacement requires care around live electrical components and hot engine surfaces. Always disconnect the battery and allow sufficient cool-down time. If you are not confident performing this work, have a qualified Land Rover technician complete the installation. Improper fitment can result in poor idle, limp-home mode, or DTC P0122 (throttle position sensor fault).
Ready to Restore Engine Control
A failing throttle body assembly leads to rough idling, sluggish throttle response, and unwanted limp-home diagnostics. Our factory-spec replacement restores precision intake control and stable engine operation.
Shop Throttle Body Housing & Motor
Use code 22GET20 for 20% off any 2 items.
12,300+ verified reviews
4.9 / 5 stars
30-day money-back
Worldwide DHL / FedEx
Need guidance? Call +44 203 943 9919 (Mon–Fri 9am–7pm GMT). Our technicians are standing by.
Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, the Range Rover brand, or their parent companies. Product names, part numbers, and specifications are provided for identification and compatibility reference only. OEM trademark rights remain with their respective manufacturers. All products are supplied as-is under our 30-day money-back guarantee and 1-year manufacturer warranty. Always verify fitment with your vehicle's VIN before purchase.
CRANKSHAFT REAR OIL SEAL FOR 2.0 TURBO JAGUAR LAND ROVER RANGE ROVER SPORT EVOQUE NEW DISCOVERY VELAR DEFENDER LR073783 LR084639
from £ 123.30
Victorious · Lubrication System · Seals
Crankshaft Rear Oil Seal for 2.0 Turbo Jaguar, Land Rover & Range Rover
OEM-spec rear crankshaft oil seal engineered to eliminate leaks and protect your turbo engine's bottom end.
2.0L Turbo Engine
Range Rover Sport
Discovery 5 & Sport
Defender 2020+
Evoque L551
Velar
Jaguar F-Type / XE / XF / F-Pace / E-Pace
2014–2025
About This Seal
Your Range Rover Sport, Defender, Discovery, or Jaguar's 2.0-litre turbo engine relies on precise crankshaft sealing to prevent catastrophic oil loss. The rear crankshaft oil seal sits at the back of the crankshaft, where it enters the flywheel. When this seal fails, oil weeps into the bellhousing, fouls your clutch, and starves your turbocharger—all expensive problems downstream.
This OEM-specification rear crankshaft oil seal replaces Jaguar Land Rover part numbers LR073783, LR084639, JDE39481, and JDE36987 across the entire 2.0 Ingenium turbo lineup. It's manufactured to factory tolerances and material specifications, delivering the same durability and longevity as the original component.
Whether you're addressing a known weep, replacing seals during a clutch job, or rebuilding your crankcase, this seal restores the integrity of your engine's rear end and ensures clean, dry operation for years to come.
What's Included
🔧
1 × Crankshaft Rear Oil Seal
OEM-spec plastic composite
📋
Installation Guide
Quick-reference steps & torque specs
✓
30-Day Money-Back Guarantee
Full refund if not satisfied
Why This Seal Works
OEM part numbers cross-verified: LR073783, LR084639, JDE39481, JDE36987
Engineered for 2.0L Ingenium turbo engines (petrol & diesel)
Precisely molded for tight clearance against crankshaft journal
Resists high temperature and sustained turbo pressure
Eliminates oil weeping into clutch bell
Drop-in fit—no machine work required
Cost-effective vs. complete engine seal replacement
Installed by independent technicians worldwide
30-day money-back guarantee backed by Victorious
Ships within 2 business days via DHL, FedEx, UPS, or TNT
Compatibility
Vehicle
Years
Engine
Fit
Range Rover Sport
2014–2025
2.0L Turbo Petrol
Direct Fit
Range Rover Sport
2015–2025
2.0L Turbo Diesel
Direct Fit
Land Rover Discovery Sport
2015–2025
2.0L Turbo
Direct Fit
Land Rover Discovery 5
2017–2025
2.0L Turbo
Direct Fit
Range Rover Velar
2017–2025
2.0L Turbo
Direct Fit
Range Rover Evoque (L551)
2019–2025
2.0L Turbo
Direct Fit
Land Rover Defender 110 / 90
2020–2025
2.0L Turbo Petrol
Direct Fit
Land Rover Defender 110 / 90
2020–2025
2.0L Turbo Diesel
Direct Fit
Jaguar F-Type
2014–2025
2.0L Turbo Petrol
Direct Fit
Jaguar XE
2015–2025
2.0L Turbo Petrol
Direct Fit
Jaguar XF
2016–2025
2.0L Turbo Petrol
Direct Fit
Jaguar F-Pace
2016–2025
2.0L Turbo Petrol
Direct Fit
Jaguar E-Pace
2017–2025
2.0L Turbo Petrol
Direct Fit
Not sure if this fits your model? Email support@victorious.shop or call +44 203 943 9919 (Mon–Fri, 9am–7pm GMT) with your VIN.
Installation
Difficulty Level: Intermediate | Time: 3–5 hours
This job requires dropping the transmission or removing the engine. We recommend professional installation by a Land Rover / Jaguar specialist.
Disconnect battery and drain oil.
Remove transmission (manual or automatic) and flywheel/flexplate.
Inspect crankshaft rear seal journal for score marks; light machine work may be needed if damaged.
Clean journal thoroughly with lint-free cloth and approved degreaser.
Apply thin coat of clean oil to new seal's inner rubber contact surface.
Align new seal squarely on crankshaft using seal installer tool (optional but recommended).
Gently seat seal flush against engine block; ensure no twisting during installation.
Reinstall flywheel, transmission, and refill with fresh engine oil.
Start engine, check for weeps around seal area.
⚠️ Warning: Do not force the seal onto the crankshaft. If resistance is felt, stop and inspect the journal. Oil the seal lip thoroughly to aid installation. Improper seating will result in immediate leakage and engine damage.
Ready to Eliminate Oil Weeps?
Stop the leak. Protect your turbo. Restore peace of mind with an OEM-spec crankshaft rear oil seal from Victorious. Ships worldwide within 2 business days.
Shop Now
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 stars
✓ 12,300+ verified reviews
🚚 Worldwide DHL / FedEx / UPS
💚 30-day money-back guarantee
Victorious Automotive is an independent aftermarket parts specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, its parent Tata Motors Limited, or any official JLR subsidiary. All part numbers, vehicle names, and trademarks are the property of their respective owners and are used solely for identification purposes. This product meets or exceeds OEM specifications but is manufactured by certified third-party suppliers. Please verify compatibility with your vehicle's service manual or consult a technician before purchase.
2.0 TURBO CRANKSHAFT REAR OIL SEAL FOR LAND ROVER NEW DISCOVERY RANGE ROVER SPORT EVOQUE VELAR DEFENDER JAGUAR JDE39481 LR084639
from £ 70.19
Victorious · Lubrication Systems · OEM Components
2.0L Turbo Crankshaft Rear Oil Seal
Factory-specification rear crankshaft oil seal engineered to prevent oil weeping and maintain engine integrity across modern Land Rover and Jaguar platforms.
2.0L Turbo Petrol & Diesel
Discovery Sport · Velar · Evoque
Range Rover Sport · Defender
OEM Equivalent (LR084639, JDE39481)
Oil Seal · Gasket System
Overview
The crankshaft rear oil seal is a critical gasket component found in Land Rover and Jaguar platforms powered by 2.0-litre turbocharged engines. Located at the rear of the crankshaft, this seal prevents oil from escaping through the crankshaft-to-transmission interface, protecting your engine's lubrication system and transmission functionality.
Over time, engine oil degradation, thermal cycling, and normal wear cause the original seal material to harden and crack, leading to slow oil weepage. Even minor seepage can accumulate onto the flywheel, contaminate transmission fluid, and trigger diagnostic trouble codes. This direct-fit replacement restores OEM-standard sealing performance and eliminates the source of oil leaks.
Whether you're performing a planned maintenance oil service or addressing a known leak, this is the correct factory-specification seal used by Land Rover and Jaguar across Discovery, Range Rover, and Defender lines from 2014 onwards.
What's Included
🔧
Crankshaft Rear Oil Seal
OEM-specification gasket with integral spring retention
📋
Installation Notes
Fitment reference for Discovery, Range Rover, Defender, Evoque, Velar, Jaguar
✓
OEM Part Verification
Compatible with LR084639 and JDE39481 specifications
🛡️
30-Day Money-Back Guarantee
Full refund if not satisfied or incompatible with your vehicle
Key Product Highlights
Direct replacement for OEM part numbers LR084639 and JDE39481
Designed for 2.0L EcoBoost and TDI turbo engines
Factory-specification material and spring retention system
Prevents oil weepage at crankshaft-to-transmission interface
Compatible with automatic and manual transmissions
Tested across 2014–2024 model year ranges
Simple installation—no special tools required for most jobs
Restores original oil circulation efficiency
12-month manufacturer warranty included
Ships worldwide via DHL, FedEx, UPS, TNT within 2 working days
Compatibility Guide
Vehicle Model
Year Range
Engine Code
Direct Fit
Range Rover Sport L494
2014–2020
2.0L Turbo Petrol / Diesel
✓ Compatible
Range Rover Sport L461
2022–2026
2.0L Turbo Petrol / Diesel
✓ Compatible
Land Rover Discovery Sport
2015–2026
2.0L Turbo Petrol / Diesel
✓ Compatible
Land Rover Discovery 5
2017–2026
2.0L Turbo Petrol / Diesel
✓ Compatible
Range Rover Velar
2018–2022
2.0L Turbo Petrol / Diesel
✓ Compatible
Range Rover Evoque L551
2019–2026
2.0L Turbo Petrol / Diesel
✓ Compatible
Range Rover Evoque L538
2011–2019
2.0L Turbo Petrol
✓ Compatible
Land Rover Defender L663
2020–2026
2.0L Turbo Petrol / Diesel
✓ Compatible
Jaguar F-TYPE
2014–2026
2.0L Turbo Petrol
✓ Compatible
Jaguar XE
2015–2026
2.0L Turbo Petrol
✓ Compatible
Jaguar XF
2016–2026
2.0L Turbo Petrol
✓ Compatible
Jaguar F-PACE
2016–2026
2.0L Turbo Petrol
✓ Compatible
Jaguar E-PACE
2017–2026
2.0L Turbo Petrol
✓ Compatible
Note: Always verify your engine specification and part number against your service documentation before installation. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure of compatibility.
Installation Notes
Difficulty Level: Intermediate | Time Required: 3–5 hours
Disconnect the negative battery terminal and allow the engine to cool completely.
Raise the vehicle safely on jack stands and remove the underside skid plate if fitted.
Drain the transmission fluid into a clean container and remove the transmission pan (or access plate on some models).
Remove the clutch pressure plate assembly (manual gearbox) or torque converter bolts (automatic transmission) to access the crankshaft rear.
Carefully extract the worn seal using a precision seal removal tool or a carefully angled pry bar—do not score the crankshaft surface.
Clean the crankshaft sealing surface with a lint-free cloth and light solvent. Inspect for scoring or wear; light wear is normal.
Lubricate the inner lip of the new seal lightly with clean transmission fluid or engine oil.
Gently tap the new seal into place using a seal installation tool or a socket slightly larger than the seal outer diameter. Drive it flush to the engine block.
Reinstall the clutch or torque converter assembly with fresh fasteners, torqued to OEM specification.
Replace the transmission pan gasket, refill with OEM-spec fluid, and recheck the level after initial startup.
Allow 10 minutes of idle running before driving. Monitor for leaks over the first 50 km.
⚠️ Professional Installation Recommended: Rear crankshaft seal replacement requires transmission removal or partial disassembly on most models. If you're unfamiliar with transmission work, have this service performed by a qualified Land Rover technician or specialist workshop. Incorrect installation can result in oil leaks and transmission contamination.
Why Choose Victorious Automotive
We are the UK's premier specialist in Land Rover, Range Rover, and Defender performance and care components. Every product in our catalogue is tested against OEM specifications and backed by our 30-day money-back guarantee. With over 12,300 five-star verified reviews, we deliver worldwide via DHL, FedEx, UPS, and TNT within 2 working days—often faster.
This crankshaft seal is direct-fit to your 2.0L turbo engine and restores factory-level sealing without the cost of a full engine rebuild. Unlike counterfeit or substandard alternatives, we guarantee genuine OEM-specification material and dimensions.
Ready to Stop the Weep?
Restore your Land Rover or Jaguar's engine integrity with this factory-specification crankshaft rear oil seal. Direct fit, proven reliability, 30-day guarantee.
Shop Now
Use code
22GET20
20% off any 2 items
12,300+ Verified Reviews
4.9/5 Stars
30-Day Money-Back Guarantee
Worldwide Shipping
📞 +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or owned by Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, Discovery, Evoque, Velar, or any derivative marks. All references to vehicle brands and model names are for compatibility and identification purposes only. OEM part numbers are cited for cross-reference accuracy. This product is manufactured to OEM-equivalent specification and is not an original Jaguar Land Rover component.
2.2L Diesel EGR Valve Gasket for Land Rover Freelander 2 RR Evoque Discovery Sport Exhaust Gas Recirculation Valve Seal LR000998
from £ 71.92
Victorious · Diesel Engine · Exhaust System
2.2L Diesel EGR Valve Gasket – Freelander 2 / Evoque / Discovery Sport
Factory-spec gasket seal for 2.2L diesel Exhaust Gas Recirculation systems. Direct fit, proven reliability, 30-day money-back guarantee.
Freelander 2 (L359)
Range Rover Evoque (L538)
Discovery Sport (L550)
2.2L Diesel
OEM Spec
EGR System
Overview
The Freelander 2, Range Rover Evoque, and Discovery Sport rely on precision-engineered exhaust gas recirculation (EGR) systems to manage emissions and optimise combustion efficiency. At the heart of that system sits the EGR valve gasket—a critical sealing component that prevents combustion gases from escaping into the engine bay and maintains system integrity under sustained heat and pressure.
This 2.2L diesel EGR valve gasket (OE part number LR000998) is engineered to OEM specifications for direct fitment and long-term reliability. Whether you're replacing a worn gasket due to age, heat cycling, or preventive maintenance, this part delivers factory-level performance without compromise.
We've selected this gasket for its material consistency, dimensional accuracy, and proven track record across thousands of diesel Land Rovers and Range Rovers. Fits Freelander 2 (2006–2014), Range Rover Evoque L538 (2012–2014), Discovery Sport L550 (2015+), and compatible Jaguar XF, Ford Galaxy, S-Max, Mondeo, Citroën C5, and Peugeot models with 2.2L diesel engines.
What's Included
🔧
EGR Valve Gasket
1× OEM-spec seal, LR000998
Product Highlights
Direct OEM replacement gasket for LR000997 EGR valve
Compatible with LR057662 EGR cooler systems
2.2L diesel engine specification across multiple platforms
Factory-grade material composition and dimensional accuracy
Prevents combustion gas leakage and maintains system pressure
12-month manufacturer warranty included
No harmful chemicals; safe for engine bay installation
Tested across 2006–2026 model years
Easy installation with standard tools
Backed by 30-day money-back guarantee
Compatibility
Vehicle
Model Code
Years
Status
Land Rover Freelander 2 (LR2)
L359
2006–2014
Direct Fit
Range Rover Evoque
L538
2012–2014
Direct Fit
Land Rover Discovery Sport
L550
2015+
Direct Fit
Jaguar XF
X250
2012–2015
Compatible
Ford Galaxy / S-Max / Mondeo
–
2010–2014
Compatible
Citroën C5
–
2010+
Compatible
Peugeot 407 / 607 / 807 / 4007
–
2006+
Compatible
Before purchase: Verify your vehicle's VIN and current EGR valve part number (LR000997). Contact our team at +44 203 943 9919 if you're unsure of fitment.
Installation Notes
Difficulty Level
Intermediate. Requires EGR valve removal and gasket replacement. Approximately 1.5–2.5 hours depending on engine bay access and tool familiarity.
You'll Need
Socket set and spanners (8–13mm)
EGR valve gasket scraper or soft plastic tool
Gasket sealant (if recommended by Land Rover service bulletin)
Engine degreaser and lint-free cloths
Torque wrench (check manufacturer specs for valve fasteners)
Steps
Disconnect battery: Disconnect the negative terminal to prevent accidental ignition or electrical short.
Locate EGR valve: Access the valve assembly; it's typically mounted on or near the intake manifold. Consult your service manual for exact location.
Remove fasteners: Unbolt the EGR valve from its mounting points. Note the orientation and fastener positions for reassembly.
Clean gasket surfaces: Scrape away the old gasket material carefully. Avoid scratching the valve body or mounting surface. Use degreaser to clean all residue.
Inspect valve: Check the EGR valve seat and gasket surface for pitting or damage. If damaged, consider valve replacement (LR000997).
Install new gasket: Position the new gasket (LR000998) on the cleaned mount surface, aligning all bolt holes.
Refit valve: Carefully lower the EGR valve into place, hand-thread fasteners, and tighten in a star or cross pattern to prevent warping. Torque to manufacturer specification (typically 20–25 N·m).
Reconnect systems: Reattach any hoses, electrical connectors, and fasteners removed during disassembly.
Reconnect battery: Reconnect the negative terminal and start the engine to check for leaks or abnormal sounds.
Bleed air (if required): Some EGR systems benefit from a bleed cycle; follow your service manual guidance.
Important: Do not reuse the old gasket. Gaskets compress and harden over time and cannot be reliably sealed twice. Always install a new gasket during EGR valve service. If the valve is corroded, damaged, or sticks when operated by hand, replace it with OEM part LR000997.
Ready to Service Your EGR System?
Premium OEM-spec gasket, 30-day money-back guarantee, and worldwide shipping. Keep your 2.2L diesel running cleanly and efficiently.
Shop Now
Use code 22GET20 for 20% off any 2 items.
4.9★ 12,300+ reviews
30-day money-back guarantee
Worldwide DHL / FedEx / UPS
Support: +44 203 943 9919
Disclaimer: This product is not affiliated with, endorsed by, or licensed by Land Rover, Range Rover, Jaguar Land Rover (JLR), Ford Motor Company, Citroën, Peugeot, or any parent company. All vehicle names, logos, and identifying marks are the property of their respective owners. This is an aftermarket replacement part meeting OEM specifications. Victorious Automotive is an independent specialist retailer.
Crankcase Vent Valve For Range Rover 13 RR Sport 14 Discovery 5 Velar Defender Jaguar XE XF F-PACE 2.0T AJ200P JDE38658 LR110348
£ 196.96
```html
Victorious · Land Rover / Jaguar · Engine Systems
Crankcase Vent Valve for Range Rover, Discovery, Defender & Jaguar 2.0T AJ200P
Direct replacement PCV valve engineered for Land Rover and Jaguar 2.0-litre turbocharged petrol engines with OEM compatibility and 12-month warranty.
AJ200P Engine
2013–2022
Direct Fit
OE Quality
12-Month Warranty
Overview
The crankcase vent valve (also known as the positive crankcase ventilation valve or PCV valve) is a critical component in your Range Rover, Range Rover Sport, Discovery, Defender, or Jaguar's engine management system. It regulates pressure inside the crankcase by routing blow-by gases back into the intake manifold, preventing oil leaks, gasket failure, and maintaining proper engine breathing.
This premium replacement valve is engineered to OEM specifications and fits directly into the cylinder head cover assembly. It's compatible with all 2.0-litre turbocharged petrol engines (AJ200P) found in 2013–2022 Land Rover Range Rover, Range Rover Sport, Discovery 5, Range Rover Velar, New Defender, and Jaguar F-Type, XE, XF, and F-PACE models.
Whether you're experiencing rough idle, positive crankcase pressure warning lights, or simply maintaining preventative engine health, this valve restores proper crankcase ventilation and engine stability.
What's Included
🔧
Crankcase Vent Valve
Direct replacement, OE-spec
📋
Installation Guide
Step-by-step reference
✓
12-Month Warranty
Parts & labour peace of mind
🌍
Worldwide Delivery
DHL, FedEx, UPS tracked
Product Highlights
OEM part numbers: LR110348, LR091805, JDE40126, JDE38658
Fits all 2.0T petrol AJ200P engines (2013–2022)
Restores proper crankcase ventilation & pressure regulation
Prevents oil leaks, gasket damage & blow-by gas buildup
Direct bolt-on installation with no modifications required
Premium OE-quality construction & durability
Eliminates rough idle & PCV warning lights
Improves fuel efficiency & combustion stability
Easy removal from cylinder head cover assembly
12-month warranty + 30-day money-back guarantee
Compatibility
Vehicle Model
Year Range
Fitment
Range Rover Vogue
2013–2022
Direct Fit
Range Rover Sport
2014–2022
Direct Fit
Discovery 5
2017–2022
Direct Fit
Range Rover Velar
2017–2022
Direct Fit
Defender 110 / 90
2020–2022
Direct Fit
Jaguar F-Type
2014–2022
Direct Fit
Jaguar XE
2015–2022
Direct Fit
Jaguar XF
2016–2022
Direct Fit
Jaguar F-PACE
2016–2022
Direct Fit
Engine Requirement: 2.0-litre Turbocharged Petrol (AJ200P) only. Confirm your engine code before purchase. Unsure? Contact us with your VIN.
Installation
DIY Installation — 45 minutes | Difficulty: Intermediate
Prepare: Engine cool. Disconnect negative battery terminal. Remove engine cover (if fitted) to access cylinder head cover.
Locate valve: Find the crankcase vent valve assembly on the top of the cylinder head cover, near the intake manifold side.
Disconnect hoses: Note hose routing with a photo. Carefully disconnect the crankcase vent hose and any breather lines using a small flat-head screwdriver or hose clamp tool.
Remove old valve: Unbolt the valve housing (typically 1–2 bolts). Remove the old valve and gasket. Clean the mounting surface with a soft lint-free cloth.
Install new valve: Position the new valve on the cylinder head cover with a fresh gasket. Install bolts hand-tight, then torque to 10 Nm (7.5 ft-lbs).
Reconnect hoses: Attach hoses to the new valve in their original positions. Ensure hoses are fully seated and secure any clamps.
Test: Reconnect battery. Start engine and listen for any unusual sounds. Check for leaks after a 5-minute idle.
Refit cover: Replace engine cover if removed. Job complete.
⚠ Note: If you notice oil in the hose system or excessive crankcase pressure, replace the valve immediately. Do not ignore PCV warning lights—they indicate crankcase pressure imbalance and can lead to gasket failure and oil leaks.
Ready to Restore Engine Breathing?
Proper crankcase ventilation is the foundation of a healthy 2.0T engine. This premium OE-spec valve delivers direct bolt-on installation, 12 months of worry-free ownership, and a 30-day money-back guarantee backed by Victorious Automotive's 4.9-star reputation.
Shop Now
Use code 22GET20 for 20% off any 2 items.
✓ 12-Month Warranty
✓ 30-Day Returns
✓ Worldwide DHL / FedEx
✓ 4.9★ (12,300+ Reviews)
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or licensed by Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket replacement part compatible with OEM systems. Always verify fitment with your vehicle's VIN before purchase. For technical support, call +44 203 943 9919 (Mon–Fri, 9am–7pm GMT).
```
CRANKCASE VENT VALVE FOR 2.0 LAND ROVER NEW RANGE ROVER EVOQUE DISCOVERY SPORT JAGUAR E-PACE OIL-GAS SEPARATOR JDE40122 LR110464
£ 231.30
```html
Victorious · Land Rover · Engine
Crankcase Vent Valve for 2.0 Turbo Petrol
OE-spec oil-gas separator for Range Rover Evoque, Discovery Sport, and Jaguar E-Pace—direct replacement with 1-year warranty.
L538 / L551 Evoque
Discovery Sport
2.0 AJ200P Turbo
Engine Bay
OE Compatible
Overview
If you own a Range Rover Evoque, Discovery Sport, or Jaguar E-Pace with the 2.0 litre turbo petrol engine, the crankcase vent valve (oil-gas separator) is critical to engine health. This component prevents pressure buildup in the crankcase and recycles oil mist back into the intake manifold—keeping your engine running cleanly and efficiently.
Over time, carbon deposits and wear cause the valve to fail. A faulty vent valve can trigger check engine lights, rough idle, increased crankcase pressure, and even oil leaks. This direct-fit replacement brings your engine back to factory specification.
Manufactured to OE standards with the same precision engineering as the original equipment part, this valve installs in minutes with no modification required. It's the dependable fix for Evoque, Discovery Sport, and E-Pace owners who demand reliability.
What's Included
⚙️
Crankcase Vent Valve
Direct OE replacement, fully tested
✓
Gasket & Seals
Pre-fitted for immediate installation
📦
Packaging
Secure protective wrapping included
🛡️
1-Year Warranty
Manufacturing defects covered
Key Features
OE-specification design—LR110464, LR094438, JDE40122, JDE39605 compatible
Separates oil mist from crankcase gases effectively
Reduces crankcase pressure and prevents oil leaks
Improves fuel economy and engine cleanliness
Fits 2.0 Turbo Petrol (AJ200P) engines exclusively
No modification or adaptation required—bolt-on fit
Tested for durability and thermal resistance
Prevents rough idle and check engine lights
Made to match original equipment quality standards
Backed by 30-day money-back guarantee from Victorious
Compatibility
Vehicle
Year Range
Engine
Fit
Range Rover Evoque (L538)
2012–2018
2.0T AJ200P
Direct Fit
Range Rover Evoque (L551)
2019–2023
2.0T AJ200P
Direct Fit
Land Rover Discovery Sport
2015–2023
2.0T AJ200P
Direct Fit
Jaguar E-Pace
2017–2023
2.0T AJ200P
Direct Fit
Range Rover Evoque (Diesel)
2012–2023
2.0D, 2.2D
Not Compatible
Discovery Sport (Diesel)
2015–2023
2.0D, 2.2D
Not Compatible
Always verify your engine type before ordering. This valve is for 2.0 Turbo Petrol (AJ200P) engines only. Check your V5C registration document or contact us via +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure.
Installation
Difficulty Level: Intermediate | Time: 45–90 minutes
Disconnect the negative battery terminal to isolate the electrical system and ensure safety.
Remove the engine cover by unclipping plastic fasteners or unbolting as required for your model.
Locate the crankcase vent valve on the top of the cylinder head or intake manifold (consult your service manual for exact position).
Disconnect the breather hose from the valve outlet by gently twisting and pulling.
Unbolt the valve using the appropriate socket or wrench—typically 10mm or 13mm.
Remove the old gasket or seal and clean the mounting surface thoroughly with a lint-free cloth.
Install the new gasket or seal on the new valve (usually pre-fitted).
Position the new valve and hand-tighten bolts to avoid cross-threading.
Torque bolts to 20–25 Nm (15–18 ft-lbs) in a star pattern for even pressure.
Reconnect the breather hose firmly and check for secure fit.
Reinstall the engine cover and reconnect the battery terminal.
Start the engine and check for oil leaks or hissing sounds. Clear any diagnostic codes if needed with an OBD scanner.
⚠️ Important: Torque specs are critical—over-tightening risks cracking the cylinder head casting. Under-tightening allows oil leaks and vacuum loss. Consult your vehicle service manual or contact our team before installation if you're unsure about bolt torque values.
Why Choose Victorious
We specialise in Land Rover, Range Rover, and Jaguar engine components. Every part is tested to OE standards and backed by our 30-day money-back guarantee. Our team has spent over a decade sourcing and vetting suppliers across the industry—you're getting quality, not compromise.
Ready to Restore Engine Health
A faulty crankcase vent valve compromises your Evoque or Discovery Sport's performance and reliability. This direct OE-spec replacement brings your engine back to factory condition in under two hours.
Shop Now
Apply code 22GET20 for 20% off when you buy any 2 items.
✓ 30-Day Money Back
✓ Worldwide Shipping
✓ 4.9★ / 12,300+ Reviews
✓ Expert Support +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All part numbers and vehicle names are used for reference and compatibility purposes only. OE part numbers listed are for fitment verification; this is an aftermarket replacement part made to OE specifications, not an original manufacturer component. Please consult your vehicle service manual or contact a qualified technician before installation. Victorious accepts no liability for improper installation, misuse, or compatibility errors resulting from user error.
```
2.7L 3.0L DIESEL ENGINE EXHAUST MANIFOLD GASKET FOR JAGUAR LAND ROVER DISCOVERY LR3 LR4 RANGE ROVER SPORT VELAR C2S30281 1336543
from £ 137.09
Victorious · Land Rover & Range Rover · Diesel Engine Gaskets
Diesel Engine Exhaust Manifold Gasket – Discovery LR3/LR4, Range Rover Sport & Velar
Direct replacement OE-spec gasket for 2.7L and 3.0L V6 diesel engines across Discovery, Range Rover Sport, and Velar platforms.
Discovery LR3 & LR4
Range Rover Sport L320–L494
Velar 2017+
2.7L & 3.0L Diesel
OEM Quality
1-Year Guarantee
Overview
The exhaust manifold gasket is a critical seal between your diesel engine's manifold and cylinder head. Over time, thermal cycling and combustion pressure erode these gaskets, leading to exhaust leaks, rough idle, loss of power, and increased emissions. Whether you drive a Discovery LR3 or LR4, Range Rover Sport (2005–2013), or the modern Velar, this OEM-specification replacement restores compression integrity and engine performance.
This gasket is engineered to match Land Rover Jaguar's original design (OE Part No. 1336543 / C2S30281) and suits both 2.7L V6 TDV6 and 3.0L V6 TDV6 diesel engines. The gasket itself is manufactured to withstand extreme manifold temperatures and exhaust pressure, ensuring a lasting, leak-free seal that eliminates symptoms of worn gaskets.
Easy to install with basic tools and modest mechanical confidence, this single-point repair often resolves stubborn exhaust leaks and restores throttle response that can be lost over years of use.
What's Included
📦
Exhaust Manifold Gasket
OEM-spec replacement, 1 or 2 units available
✓
Fitment Verification
Cross-checked against OE part number 1336543
📋
Installation Guidance
Step-by-step notes for safe replacement
🛡️
1-Year Warranty
30-day money-back guarantee via Victorious
Product Highlights
Direct OEM replacement (Part No. 1336543 / C2S30281)
Suits 2.7L TDV6 and 3.0L TDV6 diesel engines
High-temperature gasket material for durability
Engineered to original specification
Eliminates exhaust leaks and rough idle
Improves engine responsiveness
Available as single or dual gasket set
Simple installation, minimal downtime
Backed by Victorious 30-day guarantee
Ships worldwide via DHL, FedEx, UPS
Compatibility
Vehicle
Engine
Years
Status
Land Rover Discovery LR3
2.7L TDV6
2004–2009
Direct Fit
Land Rover Discovery LR4
3.0L TDV6
2009–2014
Direct Fit
Range Rover Sport L320
2.7L TDV6
2005–2009
Direct Fit
Range Rover Sport L494
3.0L TDV6
2010–2017
Direct Fit
Range Rover Sport L494
3.0L TDV6
2014–2017
Direct Fit
Range Rover Velar
3.0L TDV6
2017–2022
Direct Fit
Always verify your VIN or original part number before purchase. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) with your vehicle details if you're unsure.
Installation
Difficulty: Intermediate | Time: 1.5–2.5 hours
Disconnect the negative battery terminal and allow the engine to cool fully (at least 2 hours).
Remove the exhaust manifold bolts carefully in a cross pattern, starting from the center outward, to avoid warping.
Lift the manifold away gently from the cylinder head. Support with a jack or stand if needed.
Scrape and clean the gasket surface on both the manifold and cylinder head using a gasket scraper or soft brush. Remove all old gasket material and carbon.
Dry the surface completely with a lint-free cloth to ensure proper adhesion.
Position the new gasket carefully onto the cylinder head studs.
Reinstall the manifold and refit bolts, tightening in a cross pattern to 20–25 Nm (14–18 ft·lbf). Do not over-torque.
Reconnect the battery and start the engine. Check for exhaust leaks around the manifold for 5 minutes of idle.
Allow 30 minutes cool-down before re-checking the seal visually and by feel.
⚠️ Important: Do not attempt this job if you are inexperienced with engine work or lack proper tools. A torque wrench is essential to prevent leaks or bolt failure. If unsure, consult a certified Land Rover technician.
Ready to Seal Your Leak?
Stop exhaust leaks and restore full diesel performance with our OEM-spec manifold gasket. Available for Discovery LR3/LR4, Range Rover Sport, and Velar. Ships worldwide within 2 working days.
Shop Now
Use code 22GET20 for 20% off any 2 items.
4.9★ 12,300+ reviews
📞 UK Support Mon–Fri 9am–7pm
🌍 Ships Worldwide DHL, FedEx, UPS
💚 30-Day Money-Back Guarantee
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All parts sold are aftermarket replacements engineered to OEM specification. Part numbers and compatibility information provided for reference only. Always verify fitment with your vehicle identification number (VIN) before purchase.
2.0T AJ200P Crankcase Vent Valve For Range Rover 13 RR Sport 14 Discovery 5 Velar Defender Jaguar XE XF F-PACE JDE40126 LR110348
£ 166.67
```html
Victorious · Multi-Vehicle · Exhaust System Parts
2.0T AJ200P Crankcase Vent Valve
OE-specification crankcase vent valve for 2.0 turbo petrol engines — direct-fit replacement for Range Rover, Discovery, Velar, Defender, and Jaguar models.
L405 · L494
Discovery 5 · Velar
Defender L663
Jaguar XE · XF · F-PACE
2.0 Turbo Petrol AJ200P
Direct Replacement
Overview
If you own a 2013+ Range Rover, 2014+ Range Rover Sport, Discovery 5, Range Rover Velar, Defender 2020+, or Jaguar with the 2.0 turbo petrol AJ200P engine, the crankcase vent valve is critical to preventing pressure buildup and blow-by. When it fails, you'll see oil misting, increased emissions, poor idle quality, and potential seal damage.
This is an OE-specification replacement valve engineered to factory tolerances. It restores proper crankcase ventilation, protecting your engine's integrity and keeping your vehicle compliant and running clean. Installation is straightforward — no special tools required for most applications.
Sold new, sealed, and backed by a 1-year warranty. Fits all listed Land Rover and Jaguar variants with the AJ200P engine.
What's Included
🔧
Crankcase Vent Valve
OE-spec replacement unit, sealed
Product Highlights
OE-specification engineering for AJ200P engines
Direct-fit replacement — no modifications required
Restores proper crankcase pressure balance
Reduces oil mist and blow-by emissions
Improves idle quality and throttle response
Protects downstream seals and gaskets
New condition — sealed and tested
Compatible with multiple Jaguar and Land Rover platforms
1-year warranty included
Fast, reliable installation (30–45 minutes)
Compatibility Table
Vehicle
Model Year
Engine
Fitment
Range Rover Vogue
2013–2020 (L405)
2.0T AJ200P
Direct Fit
Range Rover Sport
2014–2020 (L494)
2.0T AJ200P
Direct Fit
Discovery 5
2017– (L462)
2.0T AJ200P
Direct Fit
Range Rover Velar
2017–2022 (L560)
2.0T AJ200P
Direct Fit
Defender
2020– (L663)
2.0T AJ200P
Direct Fit
Jaguar F-TYPE
2014–
2.0T AJ200P
Direct Fit
Jaguar XE
2015–
2.0T AJ200P
Direct Fit
Jaguar XF
2016–
2.0T AJ200P
Direct Fit
Jaguar F-PACE
2016–
2.0T AJ200P
Direct Fit
Installation Notes
⏱ Difficulty: Intermediate | Time: 30–45 minutes
Disconnect the negative battery terminal and allow the engine to cool completely.
Locate the crankcase vent valve on the cylinder head cover (position varies by model — consult your service manual or online forums for your specific engine bay layout).
Disconnect any hoses or electrical connectors from the old valve.
Unscrew or unbolt the old valve from the cylinder head cover.
Install the new valve using the same fastening method. Ensure all gaskets or seals are properly seated.
Reconnect hoses and any electrical connections. Verify they are fully seated and secure.
Reconnect the negative battery terminal.
Start the engine and check for any oil leaks around the installation point. Allow 5–10 minutes of idle to stabilise.
⚠ Note: Cylinder head cover removal may be necessary on some models. Always consult your vehicle's service manual or a trusted technician if you are unsure of the exact location or access method.
Keep Your Engine Breathing Right
A failing crankcase vent valve forces your engine to work harder and damages seals over time. This OE-spec replacement restores proper ventilation and protects your investment.
Shop Now
Use code 22GET20 for 20% off any 2 items.
4.9★ 12,300+ verified reviews
30-day money-back guarantee
Worldwide shipping via DHL, FedEx, UPS
Call us: +44 203 943 9919
Victorious Automotive is an independent aftermarket supplier. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Range Rover, Land Rover, Defender, or Jaguar. All brand and model names are registered trademarks of their respective manufacturers and are used solely for fitment and identification purposes.
```
2x Ignition Coils For BMW 135i 335i 435i 535i 525i 640i M3 X3 Z4 2002-2016 MINI COOPER 2011-2016 GN10571 0221504470 12138616153
£ 220.24
```html
Victorious · Ignition System · Coil-on-Plug
2x Ignition Coils for BMW 135i 335i 435i 535i 640i M3 & MINI Cooper
Direct-fit replacement ignition coils with OEM-specification construction—restore reliable spark and cold-start performance across 2002–2016 BMW and 2011–2016 MINI models.
GN10571 / 0221504470
2002–2016 BMW
2011–2016 MINI Cooper
Coil-on-Plug (COP)
3-Terminal
Direct Fit
The Product
This is a precision set of two OEM-specification ignition coils engineered to the exact tolerance and electrical standards of the original Delphi and Bosch units fitted to BMW and MINI vehicles from the early 2000s through the mid-2010s. Each coil features direct threaded installation into the cylinder head, 3-terminal primary/secondary configuration, and galvanic isolation to prevent crosstalk between adjacent spark plugs on turbocharged and naturally aspirated engines alike.
Ignition coils degrade with age—worn internal windings reduce voltage delivery, causing rough idle, hesitation on cold start, and elevated fuel consumption. These replacement units restore spark consistency and combustion efficiency across the full RPM range, whether your BMW is a performance-oriented 335i or your MINI is a daily driver. Manufactured to Partsmost specifications and tested against OEM baselines, each coil carries the same dwell characteristic and turns ratio as the original equipment.
The set is supplied in original protective packaging with mounting hardware. Installation requires basic hand tools and takes approximately 30 minutes per coil on most models. No ECU reprogramming or specialist equipment is needed.
What's Included
⚡
2× Ignition Coils
GN10571 / 0221504470 spec
🔧
Mounting Hardware
Seals, gaskets, connectors
📦
OEM-Style Packaging
Protective carton & foam
✓
Installation Guide
Torque specs & location diagrams
Key Highlights
OEM-Spec Windings: Matched dwell and turns ratio to original Delphi/Bosch units
Direct Cylinder Head Fit: No adapters or modifications—bolt-on replacement
2.0L & 3.0L Engine Compatibility: Covers naturally aspirated and turbocharged blocks
3-Terminal Design: Primary/secondary isolation prevents spark advance degradation
Thermal Stability: Rated for sustained high-heat underhood environment
Cold-Start Reliability: Consistent spark voltage from –10°C to +80°C ambient
Plug-and-Play Connectors: Factory-standard secondary caps—no cutting or splicing
Galvanic Isolation: No crosstalk between adjacent cylinders on multi-coil setups
Long Service Life: Designed for 100k+ mile intervals under normal driving
Tested Before Shipment: Every coil verified for resistance, insulation, and spark delivery
Vehicle Compatibility
Vehicle / Model
Years
Engine
Fit
BMW 135i
2011–2013
3.0L Turbo
Direct Fit
BMW 335i / 335i xDrive
2011–2015
3.0L Turbo
Direct Fit
BMW 435i / 435i xDrive
2014–2016
3.0L Turbo
Direct Fit
BMW 525i / 525xi
2002–2007
2.5L NA / 3.0L NA
Direct Fit
BMW 528i / 528i xDrive
2008–2016
3.0L NA / Turbo
Direct Fit
BMW 535i / 535i xDrive
2011–2016
3.0L Turbo
Direct Fit
BMW 640i / 640i xDrive
2012–2017
3.0L Turbo
Direct Fit
BMW M3
2015–2017
3.0L Twin-Turbo
Direct Fit
BMW X3
2004–2017
2.0L / 3.0L
Direct Fit
BMW Z4
2003–2015
2.0L / 3.0L
Direct Fit
MINI Cooper Countryman
2011–2016
1.6L / 2.0L
Direct Fit
MINI Cooper Paceman
2013–2016
1.6L / 2.0L
Direct Fit
Before purchase: Confirm fitment by VIN. Part numbers GN10571, 0221504470, 0221504464, and 12138616153 are primary references; some vehicles may use alternative cross-reference numbers. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to verify your exact model and engine code.
Installation & Notes
Difficulty: Moderate | Time: 30–60 minutes (per coil)
Disconnect the negative battery terminal to isolate the electrical system and prevent accidental ignition.
Locate the ignition coils mounted directly on top of each spark plug. On most BMWs, they sit under the plastic engine cover; remove the cover carefully.
Unplug the connector from the top of the coil by pressing the release tab gently.
Remove the mounting bolt (usually 13 mm or 16 mm socket) that secures the coil to the cylinder head.
Withdraw the old coil and inspect the rubber seal beneath it. If cracked or hardened, replace it (usually included in your kit).
Fit the new seal onto the spark plug pocket and insert the new coil, aligning the connector socket upward.
Install and torque the mounting bolt to 10 Nm (7 ft-lbs) on BMW engines. Over-tightening can crack the ceramic insert.
Reconnect the wiring harness until you hear a click—the connector should sit flush.
Repeat for the second coil.
Reinstall the engine cover, reconnect the negative battery terminal, and start the engine. The ignition system should initialize within 10 seconds.
⚠ Important: Do not apply excessive force when removing or installing coils—the ceramic spark plug pocket can fracture if the coil is twisted or levered sideways. Use a straight vertical pull and push motion only. If you encounter stuck connectors, spray with electrical contact cleaner (WD-40) and wait 5 minutes before gentle pressure.
Why Choose Victorious
We've built our reputation on supplying premium OEM-spec ignition components to enthusiasts and professionals across the UK and Europe. Every ignition coil in this set is bench-tested for voltage output, insulation resistance, and thermal stability before it ships. We stand behind our parts with a 30-day money-back guarantee—if the coils don't restore your engine's spark or you're not satisfied, we'll refund you in full, no questions asked.
Restore Reliable Ignition
Worn ignition coils steal power and reliability. This direct-fit pair puts OEM-spec spark back in your BMW or MINI—cold starts, throttle response, and fuel economy all improve. Free worldwide shipping, expert support, and guaranteed compatibility.
Shop Now
Use code 22GET20 for 20% off any 2 items.
4.9★ 12,300+ verified reviews
✓ 30-day money-back guarantee
✓ Worldwide DHL/FedEx shipping
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover, BMW, or MINI. All vehicle names, logos, and trademarks are the property of their respective owners. This product is an aftermarket replacement part designed for mechanical compatibility only. Always verify VIN and consult your vehicle's service manual before installation.
```
GENUINE2.0 TURBO AJ200P IGNITION SPARK PLUG SET FOR LAND ROVER NEW DISCOVERY RANGE ROVER SPORT VELAR EVOQUE 19 LR178881 LR091617
£ 244.57
```html
Victorious Automotive · Land Rover / Jaguar · Ignition System
Genuine 2.0L Turbo AJ200P Laser Iridium Spark Plug Set — 4-Piece
Premium OEM-quality spark plugs engineered for flawless ignition, fuel efficiency, and reliable cold starts across Land Rover and Jaguar 2.0T platforms.
AJ200P Engine
2014–2022
Laser Iridium Electrode
Direct Fit OEM
12-Month Warranty
Overview
If you own a modern Land Rover Range Rover Sport, Discovery, Velar, or Evoque with the 2.0L turbocharged petrol engine, your ignition system is mission-critical. The Genuine 2.0L Turbo AJ200P Laser Iridium Spark Plug Set delivers the precision combustion timing your vehicle demands—especially under boost pressure and variable load conditions.
This is a factory-spec replacement set of four plugs, identical to the original equipment specification. Laser-refined iridium electrodes provide superior durability, wider firing efficiency windows, and cleaner emissions compared to standard copper plugs. You'll notice quicker starts, smoother idle, and responsive throttle feel the moment they're installed.
Engineered for Land Rover and Jaguar's advanced fuel-injection and variable-valve-timing systems, these spark plugs handle the demands of modern turbocharging without compromise. With proper maintenance, expect 20,000+ miles of reliable ignition performance.
What's Included
🔩
4× Laser Iridium Spark Plugs
OEM-spec, ready to install
📋
Installation Guide
Torque specs and gap reference
✓
12-Month Manufacturer Warranty
30-day money-back guarantee
🌍
Worldwide DHL/FedEx Shipping
Tracked delivery to your door
Product Highlights
Laser-refined iridium electrode tips for superior spark energy
Direct OEM replacement—no modifications needed
Enhanced cold-start performance in winter conditions
Reduced emissions and improved fuel economy
Engineered for 2.0L turbocharged petrol engines
Superior durability vs. standard copper spark plugs
Wide firing efficiency window under variable boost
Factory torque spec and gap pre-set
Compatible with factory diagnostic systems
12-month warranty + 30-day money-back guarantee
Compatibility Matrix
Vehicle Model
Year Range
Engine
Fit Status
Range Rover Sport
2014–2022
2.0L Turbo (AJ200P)
Direct Fit
Land Rover Discovery
2017–2022
2.0L Turbo (AJ200P)
Direct Fit
Discovery Sport
2015–2022
2.0L Turbo (AJ200P)
Direct Fit
Range Rover Velar
2017–2022
2.0L Turbo (AJ200P)
Direct Fit
Range Rover Evoque
2019–2022
1.5L Turbo (AJ20P3)
Direct Fit
Jaguar F-Type
2014–2020
2.0L Petrol (AJ200P)
Direct Fit
Jaguar XE
2015–2020
2.0L Petrol (AJ200P)
Direct Fit
Jaguar XF
2016–2020
2.0L Petrol (AJ200P)
Direct Fit
Jaguar F-Pace
2016–2020
3.0L Petrol (AJ20P6)
Not Compatible
Jaguar E-Pace
2017–2020
1.5L Petrol (AJ20P3)
Direct Fit
⚠️ Important: Always verify engine code and part numbers before purchase. Check your service manual or contact our experts: +44 203 943 9919 (Mon–Fri, 9am–7pm GMT).
Installation
Difficulty Level: Intermediate | Time: 30–45 Minutes
Engine Off & Cool: Allow the engine to cool for at least 15 minutes. Disconnect the negative battery terminal for safety.
Access Coil Packs: Remove the engine cover (if equipped). Locate the four ignition coil packs over the spark plug wells.
Remove Old Plugs: Gently twist and lift each coil pack away from its connector. Note the cylinder firing order. Use a spark plug socket to carefully extract each used plug.
Inspect & Gap Check: Factory-set gap is pre-calibrated, but verify with a gap tool: 0.032" (0.8mm) for optimal performance.
Install New Plugs: Hand-thread each new plug carefully—do not cross-thread. Torque to specification (typically 15–20 lb-ft for Land Rover/Jaguar).
Reconnect Coils: Reinstall coil packs in correct firing order. Ensure connectors click firmly into place. No gaps or loose connections.
Battery & Test Start: Reconnect negative terminal. Start engine—expect smoother idle and quicker response immediately.
⚠️ Safety Note: Do not force coil packs or plugs. If resistance is encountered, stop and consult your service manual or a qualified technician. Forcing can damage cylinder heads or ignition systems. Always work on a cool engine and wear appropriate hand protection.
Ready to Restore Your Ignition System?
These Genuine 2.0L Turbo AJ200P Laser Iridium Spark Plugs are the direct replacement your Land Rover or Jaguar deserves. Factory-spec performance, OEM quality, and backed by our 12-month warranty and 30-day money-back promise.
Shop Spark Plug Set
Use code 22GET20 for 20% off any 2 items.
✓ 4.9/5 Stars – 12,300+ verified reviews
✓ 30-Day Guarantee – full refund, no questions
✓ Worldwide Shipping – DHL, FedEx, UPS, TNT tracked
✓ Expert Support – +44 203 943 9919
Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, Discovery, or any JLR subsidiary. All vehicle names and logos are the property of their respective owners. Product compatibility is provided for reference only; please verify fitment using your VIN or vehicle service manual before purchase. Installation should only be performed by qualified technicians. Victorious Automotive assumes no liability for improper installation, modifications, or damage resulting from use of this product.
```
We are here to help, Our Phone lines are open Monday to Friday 9-7PM