Range Rover Vogue L405 MY13-20 Accessories

Victorious Automotive · Range Rover Vogue L405 · Exterior Body Kits Range Rover Vogue L405 SVO Body Kit Upgrade — 2013–2017 to 2018–2021 Facelift Conversion Transform your pre-facelift L405 Vogue into the sharper, more commanding 2018 SVO aesthetic — with a complete front-to-rear body conversion kit engineered for a factory-quality finish. Range Rover Vogue L405 2013–2017 to 2018–2021 SVO Facelift Conversion Bare Plastic – Ready to Paint Full Body Kit Front & Rear Upgrade Direct Fit Professional Install Recommended Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs ever produced — but the 2018 facelift brought a genuinely elevated design language that set it apart from earlier model years. The redesigned front and rear bumpers, revised lighting signatures, refreshed grille, and updated bodywork details gave the facelift car a distinctly more composed, contemporary presence. If your L405 was built between 2013 and 2017, this conversion kit is the most comprehensive way to bring it fully in line with the post-facelift specification. This SVO-style body kit has been developed specifically for the pre-facelift L405 platform, encompassing every major exterior panel and styling element that changed in the 2018 update. From the revised front bumper and new-generation headlights through to the restyled rear end, updated fenders, bonnet vents, side vents and grille — this is a complete exterior transformation, not a partial refresh. Every component is precision-moulded in high-quality bare plastic, ready to be painted to your exact factory colour code or a bespoke finish of your choosing. Whether you're looking to modernise a high-mileage example before a sale, unify the appearance of a recently acquired pre-facelift vehicle, or simply want the cleaner, more aggressive look of the post-2018 specification, this kit delivers a thorough, cohesive result. Fitted correctly by a professional bodyshop, the transformation is indistinguishable from a factory facelift car. What's Included 💡 Front Lights (Pair) 2018-style headlight units, left & right 🔴 Rear Lights (Pair) 2018-style tail light units, left & right 🚗 Front Bumper 2018 facelift style, bare plastic 🔧 Rear Bumper 2018 facelift style, bare plastic 🪟 Front Fenders / Wings (Pair) Left & right, 2018 profile ◼️ 2018 Black Sport Grille Gloss black, facelift spec 🔲 Black Side Vents (Pair) 2018-style side vent inserts 🏁 Hood / Bonnet Vents 2018 bonnet vent set, bare plastic Product Highlights Complete front-to-rear facelift conversion for the L405 platform Updates 2013–2017 models to the refined 2018–2021 exterior specification Supplied in bare plastic — ready for any factory or custom paint code Precision-moulded for direct fitment to pre-facelift L405 mounting points Includes updated 2018-style front and rear lighting units New-generation sport grille in gloss black for a sharper front face Revised bonnet vents and side vents match factory facelift detailing Significantly enhances kerb appeal and potential resale value All eight conversion components included in a single kit Designed for professional bodyshop installation for a seamless OEM result Compatibility Vehicle Model Code Year Range Compatibility Range Rover Vogue L405 2013–2017 (Pre-Facelift) Direct Fit Range Rover Vogue L405 2018–2021 (Facelift) Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Installation Guide — SVO Facelift Body Kit · L405 Vogue Begin by removing the existing pre-facelift front bumper, grille, headlights, bonnet vents, and front fenders carefully to avoid damaging surrounding panels or wiring looms. Remove the existing rear bumper and tail light units, noting all wiring connector positions for re-connection during reassembly. Have all bare plastic components professionally prepared, primed, and painted to your chosen factory colour or custom finish before installation begins. Fit the new 2018-style front fenders first, aligning to OEM mounting points and verifying panel gaps are consistent before torquing fasteners. Install the new bonnet vents and side vent inserts, ensuring flush fitment with surrounding body panels. Fit the 2018 front bumper assembly, followed by the new sport grille, checking alignment across the full width of the vehicle. Connect and install the new front headlight units, verifying electrical connections and beam alignment post-installation. Install the 2018 rear bumper and connect the new tail light units, testing all lighting functions before completing the installation. ⚠ Professional Installation Strongly Recommended. This kit involves the removal and replacement of multiple structural and electrical body components. Incorrect fitment can affect panel gaps, paint integrity, and lighting alignment. We strongly recommend installation by an experienced bodyshop or Land Rover specialist. Components are supplied unpainted — painting prior to fitting is essential. The L405 Deserves the Facelift Look Browse the full range of Range Rover Vogue L405 upgrades at Victorious Automotive — the UK's most trusted specialist in Range Rover, Land Rover, and Defender accessories, with over 12,300 verified five-star reviews. Shop All L405 Vogue Upgrades → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or representing Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for identification and compatibility purposes only. All rights remain with their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Body Kits SVO-Style Full Body Kit – Range Rover Vogue L405 (2014–2017) A complete front-to-rear aerodynamic transformation for the L405 Vogue, engineered in OEM-grade polypropylene to deliver the commanding SVO aesthetic your Range Rover deserves. Range Rover Vogue L405 2014–2017 SVO Style PP Polypropylene Full Body Kit Front & Rear Bumpers Door Trim Front Grille Direct Fit 20kg Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that balances commanding road presence with refined British engineering. For owners who want to push that presence further without compromising the vehicle's purity of line, the SVO-style body kit offers a factory-coherent upgrade that reads as intentional rather than aftermarket. This full kit has been developed specifically for the 2014–2017 L405 Vogue facelift generation, covering every major exterior panel zone from the front bumper assembly through to the rear valance. The material specification mirrors that used by Land Rover on original bumpers — injection-moulded polypropylene — meaning fitment tolerances, flex characteristics, and paint adhesion all behave exactly as expected on a vehicle of this calibre. What distinguishes the SVO aesthetic is its restraint. Lower front air intakes are reshaped for improved visual mass. The rear diffuser gains definition. The grille surround sharpens the nose. Taken together, the kit doesn't shout — it focuses the L405's proportions into something more purposeful, more athletic, and undeniably more striking. What's Included 🔲 Front Bumper Assembly SVO-style lower fascia with integrated air intake reshaping and mounting hardware 🔳 Rear Bumper Assembly Redesigned rear lower valance with diffuser-style detail and all fixing accessories ⬛ Front Grille Surround SVO-spec grille frame with sharper profile and refined mesh integration 🟦 Door Trim Mouldings Side body lower trim panels for a cohesive full-perimeter transformation 🔩 Fitting Accessories Kit Clips, fasteners, and hardware required for clean OEM-style installation Product Highlights Precision-engineered for 2014–2017 Range Rover Vogue L405 — no cutting or modification required OEM-grade PP polypropylene — the same material used by Land Rover on original bumper assemblies SVO-inspired design language that complements the L405's factory proportions Lightweight at just 20kg for the complete kit — no adverse effect on vehicle dynamics or fuel economy Full front-to-rear coverage: bumpers, grille, door trim, and accessories in a single package Paintable surface finish — accepts standard automotive primer and topcoat for a factory-matched result Matching flex characteristics to original components — no cracking or stress fractures at panel joins Designed for direct bolt-on fitment using existing factory mounting points and fixings Ships fully protected in custom-formed packaging to prevent transit damage to panel surfaces Available with worldwide shipping via DHL, FedEx, UPS, and TNT to over 100 countries Compatibility Vehicle Model Code Year Range Trim Level Fitment Range Rover Vogue L405 2014–2017 Vogue / SE / Autobiography Direct Fit Range Rover Vogue L405 2013 Pre-facelift variants Verify Before Order Range Rover Vogue L405 2018–2021 Post-facelift variants Not Compatible Range Rover Vogue L460 2022–2026 All trims Not Compatible Range Rover Sport L494 2013–2022 All trims Not Compatible Range Rover Evoque L538 / L551 All years All trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 4–8 Hours  ·  Professional Fit Recommended Before beginning, dry-fit all panels against your vehicle to confirm alignment and identify any panel-specific adjustments needed prior to painting. Remove existing front and rear bumper assemblies, grille surround, and door trim mouldings using appropriate trim removal tools — retain all factory clips and fixings where possible. Clean, prime, and paint all new panels in your chosen colour match using a quality automotive primer and basecoat/lacquer system. Allow full cure time before fitting. Refit the front bumper assembly using existing factory mounting points. Ensure all tab locations align before applying final fixing torque. Reconnect any fog light or sensor wiring looms. Install the front grille surround, clipping into the front bumper carrier and bonnet lower edge as per the original fitment method. Fit door trim mouldings panel by panel, working front to rear, ensuring each clip locates fully before moving to the next section. Install the rear bumper assembly, reconnecting any parking sensor harnesses or tow bar components as applicable. Confirm panel gaps are even before finalising all fixings. Conduct a final visual inspection at eye level on all four sides to confirm panel alignment, consistent shut lines, and secure fitting throughout. ⚠ Important: If your vehicle is fitted with front or rear parking sensors, tow bar electrics, or active air suspension components behind the bumper, we strongly recommend professional installation to ensure all systems are correctly reconnected and remain fully operational. Painting should be completed before fitment — do not attempt to paint panels in situ. Elevate Your L405 Vogue Every detail of this SVO-style kit has been considered for owners who refuse to compromise. Explore the full Range Rover Vogue L405 accessory collection — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification before ordering. Professional installation is recommended for all bodywork components.

Victorious Automotive · Range Rover · Deployable Side Steps Deployable Electric Side Steps for Range Rover Vogue, Sport, Velar & Evoque — 2013 to 2021 Motorised aluminium running boards that automatically deploy on door open and retract flush to the sill — combining effortless entry with a cleaner, more aggressive stance. L405 · L494 · Velar · L538 / L551 2013–2021 Aluminium Alloy Auto-Deploy 800 kg Load Rated ISO9001 Certified Direct Fit Part: Star War-008 Overview The Range Rover family — from the full-size Vogue L405 to the Sport L494, Velar, and Evoque — sits high on purpose. That ride height is part of what makes these vehicles so commanding on road and off, but it can make daily boarding less than graceful for passengers. Factory side steps were never offered across most of these generations, and static aftermarket boards compromise the clean sill lines that define these designs. These deployable electric side steps solve both problems. Triggered by the door latch signal, they extend automatically when any door opens and retract tight to the undercarriage the moment the door closes — completely hidden from view when not in use. The result is a step that appears exactly when it's needed and disappears entirely when it isn't, maintaining the original profile of the vehicle without compromise. Built from extruded aluminium alloy with anti-corrosion stainless steel plating and a non-slip tread surface, these steps are engineered to the same durability standards expected of the vehicles they serve. With an 800 kg load rating, a robust motor assembly, and certification to ISO9001 and TS16949, this is not an accessory built to the lowest acceptable specification — it's one built to last the life of the vehicle. What's Included ⚙️ Motor Assembly Dual motor unit with deploy/retract mechanism 🪜 Side Step Boards (Pair) Anti-slip aluminium tread surface, left & right 🔩 Metal Support Brackets Heavy-gauge mounting arms for rigid fitment 🔌 Electric Wiring Loom Pre-terminated harness for door trigger integration 🛠️ Fixings & Accessories All hardware required for complete installation Product Highlights Auto-deploy triggered by door open signal — no switches or manual effort required Retracts flush to the underside of the sill when doors are closed, preserving the vehicle's stance Extruded aluminium alloy construction — lightweight yet rigid under load Anti-corrosion stainless steel plating for long-term protection against road salt and moisture Rated to 800 kg static load — comfortably supports occupants of any size Anti-vibration design prevents rattles during driving over rough terrain Non-slip tread surface provides secure footing in wet or muddy conditions Soft-deploy motor reduces mechanical noise and extends component life Custom-designed brackets for each specific vehicle model — no cutting or fabrication required ISO9001 & TS16949 certified — manufactured to automotive-grade quality standards Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2021 Direct Fit Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L551 2019–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not This Listing Range Rover Sport L461 2022–2026 Not This Listing Defender L663 2020–2026 Not Compatible Specifications Specification Detail Material Aluminium Alloy + Stainless Steel + ABS Part Number Star War – 008 Position Both sides of vehicle (pair) Unit Weight 26–28 kg (full set) Load Rating 800 kg Fitment Type Custom bracket, vehicle-specific direct fit Certification ISO9001 & TS16949 Trigger Method Door open / close electrical signal Installation Notes Difficulty: Intermediate  ·  Estimated Time: 3–5 Hours  ·  Two People Recommended Safely raise and support the vehicle on axle stands. Do not work under a vehicle supported only by a jack. Remove any existing sill trim or protective covers to expose the mounting points beneath the door sills. Trial-fit the metal support brackets to confirm alignment with factory mounting locations before final torquing. Mount the motor assembly to the bracket arms, ensuring the step board travel path is clear of obstructions. Route the wiring loom through the vehicle's undercarriage, keeping it clear of exhaust and moving components. Secure with supplied cable ties. Connect the wiring loom to the door trigger signal — typically tapped from the door latch switch or interior light circuit. Consult wiring diagrams for your specific model year. Power on the vehicle and test deploy/retract cycles through all doors before lowering the vehicle. Refit sill trim and conduct a final visual inspection for clearance and secure fitment. ⚠ Note: Professional installation by a qualified automotive electrician or 4x4 specialist is strongly recommended. Incorrect wiring connections may trigger fault codes or affect door module functionality. Always disconnect the battery negative terminal before working on electrical circuits. Upgrade Your Range Rover — The Right Way At Victorious Automotive, every product we stock is selected specifically for Land Rover and Range Rover owners who refuse to compromise. These deployable steps are one of the most functional upgrades you can make — and one of the most satisfying to live with every day. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle build before purchasing.

Victorious Automotive · Range Rover Vogue L405 · Exterior Trim 18-Piece High Gloss Black Exterior Trim Set — Range Rover Vogue L405 (2013–2017) A comprehensive full-exterior transformation kit engineered specifically for the L405 Vogue, delivering a unified gloss black aesthetic from bonnet to tailgate in a single package. Range Rover Vogue L405 2013–2017 High Gloss Black 18-Piece Set Exterior Trim Direct Replacement No Drilling Required Full Coverage Overview The Range Rover Vogue L405 is one of the most visually commanding vehicles on the road — a flagship SUV that rewards owners who take its appearance seriously. Whether your existing exterior trim has faded, chipped, or you simply want to elevate the look of your L405 beyond its factory specification, the exterior detail deserves the same level of attention as the interior. This 18-piece gloss black exterior trim set has been developed specifically for the Range Rover Vogue produced between 2013 and 2017. It covers every major exterior trim point — from the engine hood surround and front grille assembly through to the side vents, door trims, and tailgate finishers — ensuring the transformation is complete and consistent rather than piecemeal. The deep, mirror-like gloss black finish contrasts beautifully against the L405's bold body lines and works with any exterior colour in the Vogue palette. Rather than sourcing individual components over time, this full replacement pack gives you everything in one box. Each piece is pre-formed to match the original geometry of the L405's trim points, making fitment clean and straightforward without the need for cutting, drilling, or professional installation. For owners who want a blacked-out exterior presence with factory-level cohesion, this is the most efficient way to achieve it. What's Included 🔲 Engine Hood Trim Gloss black surround for the bonnet leading edge 🔳 Front Grille Full replacement grille surround in high gloss black ◼ Front Small Vents Pair of front bumper vent finishers 🔲 Side Vent Grilles Front quarter-panel vent surrounds, left and right 🚪 Door Side Trims Full set of door-line trim finishers across all doors ◼ Front Trims Additional front fascia accent trim pieces 🔲 Rear Trim Rear bumper and lower trim finisher in gloss black 🔳 Tailgate Trim Upper tailgate surround and handle area finisher 🔤 Range Rover Lettering Individual gloss black replacement letter badges Product Highlights Engineered exclusively for the Range Rover Vogue L405 2013–2017 body structure High gloss black finish — deep, mirror-polished surface with long-lasting clarity 18 pieces providing complete front-to-rear exterior coverage in one kit Direct replacement design — slots into factory trim positions without modification No drilling or cutting required for standard fitment Consistent finish across all components — no colour mismatch between pieces Compatible with all factory body colours including Fuji White, Santorini Black and Carpathian Grey Includes replacement Range Rover lettering for a fully blacked-out badge aesthetic Durable construction resistant to UV fade, water ingress, and road debris A cost-effective alternative to individual dealer-sourced or painted trim replacements Compatibility Vehicle Code Years Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–2021 Not Compatible – Facelift Trim Points Differ Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2018–2021 L405 Vogue or another vehicle in the Range Rover range, please contact us at +44 203 943 9919 and our team will advise on the correct kit for your specific build. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Trim removal tool, microfibre cloths, isopropyl alcohol Park the vehicle on a flat surface and allow all exterior panels to cool fully before beginning. Work in a clean, dry environment where possible. Using a plastic trim removal tool, carefully prise away the existing factory trim pieces starting from one corner to avoid cracking. Work methodically around each piece — do not force. Clean each mounting area thoroughly with isopropyl alcohol to remove any adhesive residue, wax, or contamination. Allow to dry completely before fitting new pieces. Dry-fit each replacement trim piece before final installation to confirm alignment and confirm clip or adhesive points line up correctly with the factory positions. Press each piece firmly into position, applying even pressure along the full length of each component until all clips or adhesive points are fully seated. For the Range Rover lettering, carefully align each individual letter using the existing badge positions or a level guide before pressing into place. Once all pieces are fitted, wipe down the entire exterior with a clean microfibre cloth and inspect all edges and joints for consistent fit and alignment. ⚠ Note: This set is designed as a full replacement for existing factory trim components. We recommend removing original trim pieces carefully and in sequence to avoid damage to the surrounding paintwork. If you are unsure at any stage, consult a professional detailer or bodywork specialist. Complete Your L405 Vogue This exterior trim set is one of the most impactful single upgrades you can make to your Range Rover Vogue L405. Browse our full collection of L405 accessories to find everything else your vehicle deserves. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue / Sport · Android Displays 13.3-Inch Floating Android Display Upgrade for Range Rover Vogue L405 & Sport L494 (2018–2022) A precision-engineered floating Android screen that transforms the infotainment experience in your 2018–2022 Range Rover — without touching the original system architecture. L405 Vogue L494 Sport 2018–2022 13.3-Inch Display Android 13 Wireless CarPlay Android Auto 4G RAM / 128G ROM DSP Audio Bluetooth 5.0 Direct Fit Overview The Range Rover Vogue L405 and Sport L494 are benchmarks in luxury motoring — refined, capable, and deeply satisfying to drive. But even these exceptional vehicles carry an infotainment system that, by 2024 standards, falls short of what modern technology offers. If you've found yourself wishing for wireless CarPlay, faster navigation, or a crisper display, this upgrade was designed precisely for you. This 13.3-inch floating Android display slots directly into your existing dashboard environment as a dedicated overlay screen, working alongside your factory system rather than replacing it. Your original climate controls, vehicle settings, and JLR interface remain fully intact — this unit simply adds an expansive, high-resolution touchscreen running a full Android OS above it. The result is a dramatically upgraded cabin that still feels like a Range Rover. Built with a 1920×1080 capacitive multi-touch panel, a Qualcomm-grade processor, 4GB RAM, and 128GB onboard storage, the screen performs with the kind of fluidity you'd expect from a flagship tablet. Wireless Apple CarPlay and Android Auto connect instantly. Google Maps, Waze, YouTube, and the full Play Store are available natively. The integrated DSP chip ensures your audio system sounds as good as the screen looks — and Bluetooth 5.0 keeps calls and music streaming effortless. What's Included 🖥️ 13.3-Inch Android Screen 1920×1080 capacitive multi-touch, floating mount design 🔧 Vehicle-Specific Installation Kit All harnesses, brackets, and fasteners included for L405/L494 📖 User Manual Step-by-step setup and pairing guide 🎧 DSP Audio Module Pre-integrated for enhanced sound output via 4×50W Product Highlights Direct-fit for Range Rover Vogue L405 and Sport L494 (2018–2022) with no dashboard cutting required Preserves full factory system functionality — climate, vehicle settings, and original JLR menus remain active Climate control information displayed directly on the new Android screen for seamless dual-zone operation Wireless Apple CarPlay and Android Auto — no cables, no dongles, instant pairing Full Google Play Store access — download navigation, streaming, and productivity apps freely Integrated DSP chip delivers audiophile-grade sound processing through your factory speaker system Bluetooth 5.0 for crystal-clear hands-free calls and high-fidelity music streaming GPS navigation with offline map support and Google Maps / Waze compatibility Steering wheel control retention — manage volume, calls, and media without leaving the wheel Supports 70+ UI languages including English, French, German, Spanish, Arabic, and more Technical Specifications Specification Detail Screen Size 13.3 inches Screen Resolution 1920 × 1080 (Full HD) Touch Type Capacitive Multi-Touch Operating System Android (latest supported build) RAM / Storage 4GB RAM / 128GB ROM Processor Octa-core Video Playback HD 1080P / 4K supported Audio Output 4 × 50W with DSP chip Bluetooth Version 5.0 Wi-Fi Built-in, supports hotspot connectivity Wireless CarPlay Yes — wireless, no cable required Android Auto Yes — wireless GPS Navigation Built-in with offline maps Languages Supported 70+ languages Steering Wheel Control Retained via OEM integration Climate Display Yes — dual-zone on-screen display Compatibility Vehicle Code Years Fit Range Rover Vogue L405 2018–2022 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Vogue L405 2013–2017 Verify Dashboard Range Rover Sport L494 2013–2017 Verify Dashboard Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Browse accessories for your specific vehicle: Range Rover Vogue L405 · Range Rover Sport L494 · Range Rover Vogue L460 · Range Rover Sport L461 Installation Notes 🛠 Difficulty: Intermediate  |  Estimated Time: 60–90 Minutes  |  No Cutting Required Confirm your dashboard matches the reference images provided — this unit is designed for the 2018–2022 facelift interior layout of the L405/L494. Disconnect the vehicle battery before beginning any work on the dashboard or wiring harness. Carefully remove the factory infotainment surround trim using the supplied trim tools — no permanent modification required. Connect the supplied harness to the factory wiring connectors behind the original screen area, ensuring climate and steering wheel control cables are seated fully. Mount the floating screen assembly to the provided bracket and secure using the included fasteners. Reconnect the battery, power on the system, and follow the on-screen setup wizard to configure language, CarPlay pairing, and audio settings. Test all functions — climate display, steering wheel controls, CarPlay, navigation, and audio — before reassembling the trim. ⚠ Important: Please verify your dashboard matches the product images before ordering. Pre-2018 L405/L494 models feature a different interior layout and may not be directly compatible. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) or watch the step-by-step installation video before fitting. A three-year guarantee and professional engineer support are included with every unit. Elevate Every Journey Your Range Rover deserves an infotainment experience to match its capability. This floating Android display is one of the most impactful upgrades available for the 2018–2022 L405 and L494 — and it installs without a trace. Backed by 12,300+ verified reviews and a 30-day money-back guarantee, it's the upgrade you can fit with confidence. Shop Range Rover Vogue Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm 🔧 3-Year Guarantee with Engineer Support Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or associated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used solely for fitment reference purposes.

Victorious Automotive · Range Rover L322 · Infotainment Upgrades Android 10 Screen Upgrade for Range Rover L322 (2002–2012) — 10.2" PRO-S9 Head Unit Breathe new life into your classic L322 with a direct-fit 10.2" Android 10 touchscreen — seamlessly integrated with your original steering wheel controls, CAN-Bus, and rear camera. Range Rover L322 2002–2012 Android 10 10.2" Touchscreen 6GB RAM / 128GB ROM CAN-Bus Integration Steering Wheel Control Built-in GPS Bluetooth & Wi-Fi Model: PRO-S9 Overview The Range Rover L322 — produced between 2002 and 2012 — remains one of the most revered expressions of the Range Rover lineage. Its combination of commanding presence, genuine off-road capability, and refined interior still resonates deeply with owners who choose to keep and cherish these vehicles. But the one area that inevitably shows its age is the infotainment system — and that's exactly where this upgrade changes everything. The PRO-S9 Android 10 head unit is engineered as a direct, lossless-dock replacement for the L322's original radio fascia. Running on a 6GB RAM, 128GB ROM platform with Android 10.0 OS, it delivers a crisp 1280×480 resolution across a wide 10.2" capacitive touchscreen — turning your cabin into a genuinely modern multimedia environment without altering the vehicle's core character or identity. What separates this unit from generic aftermarket screens is its deep integration with L322-specific systems. Full CAN-Bus support means it reads and displays door open/close information and original vehicle settings exactly as the factory unit would. Your original steering wheel multimedia buttons work without modification, and the factory rear-view camera input is retained. It's the upgrade that feels like it was always there. What's Included 📱 PRO-S9 Head Unit 10.2" Android 10 touchscreen, 6GB RAM / 128GB ROM 🔌 Vehicle-Specific Wiring Harness Plug-and-play connector for L322 loom 🧲 Mounting Brackets Precision-fit brackets for OEM dash aperture 📡 GPS Antenna External antenna for reliable satellite navigation 📻 DAB / FM Radio Antenna Adapter Maintains radio reception via existing aerial 🖊️ Installation Manual Step-by-step guide with wiring diagrams Product Highlights 10.2" capacitive touchscreen at 1280×480 resolution — crisp, wide, and responsive Android 10.0 OS with 6GB RAM and 128GB onboard storage for smooth, lag-free performance Full CAN-Bus support reads L322 vehicle data — door status, vehicle settings and more Original steering wheel multimedia controls retained with no additional adapters required Factory rear-view camera input supported — retain your OEM reversing camera Built-in GPS navigation with support for Google Maps, Waze, and offline map apps Bluetooth for hands-free calling and audio streaming from your smartphone Dual-band Wi-Fi with 4G/3G network support for live traffic and app connectivity 4 × 50W audio output — powerful, clean sound through your existing speaker system Micro SD slot (up to 128GB) and support for MP3, MP4, WMA, and JPEG media formats Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L322 2002–2012 Direct Fit Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2017–2022 Not Compatible Defender L663 2020–2026 Not Compatible Specifications Specification Detail Model PRO-S9 Operating System Android 10.0 RAM / ROM 6GB RAM / 128GB ROM Display Size 10.2 inches Resolution 1280 × 480 Audio Output 4 × 50W Operating Voltage 12V Din Format One Din Connectivity Bluetooth, Wi-Fi, 3G/4G, GPS External Storage Micro SD up to 128GB Interface Lossless docking Material Plastic + Alloy Item Weight 5kg Certification CE Certified Installation Notes 📋 Installation Overview — Difficulty: Moderate · Estimated Time: 1.5–3 Hours Disconnect the vehicle's negative battery terminal before beginning any work on the dashboard. Carefully remove the existing centre console trim panels using plastic trim tools to avoid cracking or scratching. The L322 dashboard is removable without specialist equipment but requires patience. Disconnect all connectors from the factory head unit — note or photograph each connection before removal. Slide out the original unit and install the PRO-S9 into the OEM aperture using the supplied mounting brackets. The unit is designed to sit flush within the factory recess. Connect the vehicle-specific wiring harness to the PRO-S9 — the lossless dock connector ensures no signal degradation across audio, CAN-Bus, and accessory feeds. Route the GPS antenna to the top of the dashboard or windscreen base for optimal satellite acquisition. Reconnect the battery, power on the unit, and verify steering wheel controls, rear camera, and vehicle data are functioning correctly before reassembling the trim. Refit all trim panels and confirm a clean, factory-finish installation. ⚠ Important: This unit does not support the original CD/DVD drive or rear headrest display screens. If you rely on either of these functions, please contact us before ordering. Professional installation is recommended for those unfamiliar with automotive electronics. Always ensure the battery is fully disconnected before working on in-cabin wiring. Upgrade Your L322. Elevate Every Journey. The Range Rover L322 deserves to be driven — and enjoyed. This Android 10 upgrade transforms the one area of the cabin that time hasn't been kind to, without compromising anything that made the L322 special in the first place. Shop All Range Rover Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 & Vogue L405 · Android Entertainment 13.3-Inch Floating Android Display Upgrade for Range Rover Sport L494 & Vogue L405 (2013–2022) A full-format 13.3-inch Android touchscreen that transforms your Range Rover's infotainment centre — bringing wireless CarPlay, Android Auto, and a modern interface to Sport L494 and Vogue L405 models without compromising any original vehicle functions. Sport L494 Vogue L405 2013–2022 13.3-Inch Screen Android OS Wireless CarPlay Android Auto 4K Video Bluetooth 5.0 DSP Audio GPS Navigation 4GB RAM / 128GB ROM Overview The Range Rover Sport L494 and Vogue L405 represent a landmark generation of Land Rover engineering — refined, capable, and built around a premium cabin experience. But the factory infotainment system, while functional at launch, increasingly falls short of the connected driving environment today's owners expect. Navigation lags, app limitations, and the absence of wireless smartphone integration are common frustrations that this upgrade resolves entirely. This 13.3-inch floating Android display is engineered specifically for the Sport L494 and Vogue L405 dashboard architecture. It slots into the factory location with a dedicated installation kit, retaining your original climate controls on-screen and preserving all steering wheel inputs. The result is a transformed centre console — expansive, responsive, and running a fully open Android platform with access to the Play Store, offline maps, streaming services, and more. With 4GB of RAM, 128GB of onboard storage, Bluetooth 5.0, built-in Wi-Fi hotspot support, and a DSP chip delivering audiophile-grade sound staging across your Range Rover's speaker system, this is not a compromise upgrade. It is a meaningful, lasting improvement to one of the cabin's most-used surfaces — delivered in a format that feels as though it should have been there from the factory. What's Included 🖥️ 13.3-Inch Android Screen 1920×1080 capacitive multi-touch display with floating panel design 🔧 Installation Kit All vehicle-specific brackets, harnesses, and fasteners required for fitting 📖 User Manual Step-by-step setup guide with pairing and configuration instructions Product Highlights Direct-fit design for Range Rover Sport L494 and Vogue L405, covering 2013–2022 model years Wireless Apple CarPlay and Android Auto — no cable required for smartphone mirroring Climate control system displayed on the new screen, maintaining full HVAC functionality DSP chip delivers enhanced sound quality with precise audio staging across all speaker channels Bluetooth 5.0 for stable, low-latency hands-free calling and music streaming Built-in GPS with offline map support and full Google Maps compatibility High-resolution 1920×1080 capacitive multi-touch display with dual-zone functionality Full steering wheel control integration for safe, distraction-free operation 4GB RAM and 128GB ROM for fast, responsive performance with ample app storage Supports up to 70 languages and 4K/HD 1080P video playback via built-in media player Compatibility Vehicle Code Years Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–2022 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Not sure which model you have? Check your V5C or contact us on +44 203 943 9919 and our team will confirm compatibility before you order. Installation Notes 📋 Difficulty: Intermediate  ·  Estimated Time: 2–3 Hours  ·  Tools Required: Trim tools, screwdrivers, basic wiring connectors Disconnect the vehicle battery and allow the system to fully power down before beginning any trim removal. Carefully remove the factory centre console trim panels using plastic trim tools to avoid scratching the surrounding surfaces. Disconnect the factory infotainment unit harnesses, taking note of each connector's position for reference during reinstallation. Connect the supplied vehicle-specific wiring harness to the new Android display unit, ensuring all connectors are fully seated. Secure the display into the dashboard using the included installation brackets, confirming the floating panel sits flush and level. Reconnect the vehicle battery and power on the system to verify display operation, climate control integration, and steering wheel controls. Pair your smartphone via Bluetooth or Wi-Fi and test CarPlay and Android Auto before completing final trim reassembly. ⚠ Important: Please verify your dashboard profile matches the product images before ordering. This product does not include the climate control screen shown in some reference images — the climate display is reproduced digitally on the new Android screen. A full installation video is available for guidance. Professional installation is recommended if you are unfamiliar with automotive trim and wiring work. Technical Specifications Specification Detail Screen Size 13.3 Inch Floating Capacitive Multi-Touch Resolution 1920 × 1080 (Full HD) Video Playback HD 1080P / 4K Supported RAM / ROM 4GB RAM / 128GB ROM Bluetooth Version 5.0 Wi-Fi Built-in, supports hotspot connectivity Output Power 4 × 50W with DSP chip Navigation Built-in GPS, offline maps, Google Maps CarPlay / Android Auto Wireless (both supported) Languages Up to 70 including English, French, German, Spanish Guarantee 3-Year Guarantee with engineer support Upgrade Your Range Rover's Cabin Today Your Sport L494 or Vogue L405 deserves a display that matches its character. This 13.3-inch Android upgrade brings modern connectivity, rich audio, and an intuitive interface to a platform built to last. Explore more upgrades for your vehicle below. Shop Range Rover Sport L494 Upgrades Shop Range Rover Vogue L405 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify dashboard compatibility using the provided product images prior to purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Lighting Range Rover Vogue L405 2013–2020 Full-Width Tailgate LED Light Strip Transform your L405's rear end with a striking full-width LED light bar — bringing Audi and Porsche-style continuity lighting to your Range Rover in a single, clean one-piece fitment. L405 Vogue 2013–2020 Full-Width LED Tailgate / Trunk ABS Construction Black or Silver Direct Fit Free Shipping Overview The Range Rover Vogue L405 is one of the most architecturally composed luxury SUVs ever made — and its rear profile deserves to match that ambition. The factory tail light arrangement, while perfectly competent, leaves a visual gap across the tailgate that more contemporary designs have since addressed with full-width LED continuity bars. This upgrade closes that gap, bringing a genuinely modern rear signature to your L405. This full-width LED light strip spans the entire width of the tailgate, integrating seamlessly into the rear of the vehicle to create a connected, unbroken light bar effect. The result is a rear aesthetic that draws immediate comparisons to flagship models from Audi and Porsche — vehicles that have made full-width rear lighting their visual trademark. On the L405, the effect is commanding and unmistakably upmarket. Manufactured from high-grade ABS and available in either Gloss Black or Silver (Grey) to complement your vehicle's existing trim, this is an evening and night-time statement as much as a daytime styling upgrade. Installation is straightforward — no cutting, no coding, no specialist tools required — making this one of the most impactful modifications you can make to your L405 for the effort involved. What's Included 💡 Full-Width LED Light Strip One-piece unit spanning the entire tailgate width 🔌 Wiring Harness Pre-terminated connectors for direct fitment 🔧 Mounting Hardware All clips and fasteners required for installation 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Full-width LED bar spanning the entire tailgate for a seamless, modern rear signature Precision-engineered ABS housing for durability and a factory-grade finish Available in Gloss Black or Silver (Grey) to suit your trim level Functions as a tail light, brake light, and turn signal indicator No cutting or permanent modification required — fully reversible Direct plug-and-play wiring — connects to your existing loom Compatible with all L405 Vogue variants across the 2013–2020 model range Elevates rear aesthetics to match contemporary luxury rivals One-piece construction ensures a clean, unbroken light line across the boot Worldwide delivery via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you're unsure whether this fits your specific vehicle build, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility before you order. Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 45–75 Minutes  ·  No Coding Required Open the tailgate fully and carefully remove the existing trim panel from the inside of the boot lid to access the rear lighting cavity. Locate and disconnect the factory tail light wiring connectors on both sides of the tailgate. Position the new full-width LED strip unit across the tailgate, aligning the mounting points with the factory apertures. Secure the unit using the supplied clips and fasteners — no drilling required. Confirm the strip sits flush and level across the full width. Connect the wiring harness to the existing factory connectors on both sides. Connectors are designed for direct plug-in; no splicing or soldering needed. Route any excess cabling neatly behind the trim panel and refit the trim, pressing firmly until all clips engage. Test all functions — tail light, brake light, and turn signals — before closing the tailgate and completing the installation. ⚠ Note: Ensure the vehicle ignition is off and the tailgate wiring is fully disconnected before beginning installation. Take care when removing trim clips to avoid cracking the panel — a trim removal tool is recommended. If in doubt, have this fitted by a qualified automotive technician. Built for L405 Owners Who Expect More At Victorious Automotive, every product we stock is chosen because it genuinely improves the ownership experience of your Range Rover. This LED tailgate strip is one of our most popular L405 upgrades — and once fitted, it's immediately obvious why. Shop All Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔁 30-Day money-back guarantee ✈️ Worldwide DHL · FedEx · UPS · TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used here solely for fitment reference purposes.

Victorious Automotive · Range Rover Vogue L405 · Interior Upgrades Digital Instrument Cluster & Speedo Upgrade — Range Rover Vogue L405 (2014–2017) Replace the factory analogue cluster with a full high-resolution digital display — a seamless, OEM+ interior transformation purpose-built for the pre-facelift L405. L405 2014–2017 Full Digital LCD Plug & Play RHD Compatible OEM+ Fitment Petrol & Diesel Pre-Facelift Overview The Range Rover Vogue L405 is one of the most distinguished luxury SUVs ever built — but for owners of pre-facelift 2014–2017 models, the factory analogue instrument cluster can feel noticeably behind the times, particularly when compared to the sweeping digital cockpits found in post-2018 models. The cabin is otherwise exceptional, which makes that dated binnacle all the more apparent. This digital instrument cluster upgrade is engineered specifically to address that discrepancy. Replacing the original cluster entirely, it introduces a crisp full-resolution LCD display with smooth animations, a modern UI, and comprehensive vehicle data readouts — all presented in a design language that sits comfortably alongside the L405's premium interior aesthetic. The result is an OEM+ finish that looks as though it could have left the factory this way. Designed with the pre-facelift L405 owner in mind, this upgrade pairs beautifully with Apple CarPlay screen replacements, ambient lighting kits, and carbon fibre interior trim — making it the natural starting point for any serious interior refresh. Fitment follows factory mounting points, and core vehicle functions are fully retained throughout. What's Included 🖥️ Digital LCD Cluster Unit Full-resolution display, pre-configured for L405 🔌 Wiring Harness / Adaptor Direct plug-in connector for factory loom 🔩 Mounting Hardware OEM-style fixings for secure installation 📄 Installation Guide Step-by-step instructions included Product Highlights Full digital LCD instrument cluster — high-resolution, crisp readout in all lighting conditions Displays speed, RPM, fuel level, coolant temperature, trip data and more OEM-style housing and fitment — no modification to the dashboard surround required Smooth animated transitions and modern UI styling throughout Plug & play design — connects directly to the factory wiring loom Right-hand drive compatible — designed for UK and RHD market vehicles Retains all core factory vehicle functions and warning indicators Dramatically modernises the interior, matching newer L405 and L460 aesthetic Compatible with both petrol and diesel drivetrain variants (spec dependent) Pairs seamlessly with Apple CarPlay upgrades, ambient lighting and trim kits Compatibility Vehicle Year Range Drivetrain Fitment Range Rover Vogue L405 2014–2017 Petrol Direct Fit Range Rover Vogue L405 2014–2017 Diesel Direct Fit Range Rover Vogue L405 2018–2021 (Facelift) Petrol / Diesel Verify Before Purchase Range Rover Vogue L460 2022–2026 All Not Compatible Range Rover Sport L494 2013–2020 All Not Compatible Installation Notes ⏱ Estimated Time: 45–90 Minutes  |  🔧 Difficulty: Intermediate Disconnect the vehicle battery and allow the system to fully power down before beginning any work. Remove the instrument cluster surround trim panel using appropriate trim tools — take care not to mark the dashboard leather or plastic surfaces. Unclip and remove the original factory cluster unit from the binnacle housing. Disconnect the factory wiring loom connectors from the rear of the OEM cluster. Connect the supplied adaptor harness to the factory loom, then connect the new digital cluster unit. Seat the digital cluster into the binnacle housing and secure using the provided mounting hardware. Refit the trim surround panel and reconnect the battery. Power on the vehicle and verify all display functions, warning indicators and vehicle data readouts are operating correctly. ⚠ Important: Compatibility may vary depending on vehicle specification, optional equipment level and regional market configuration. If you are unsure whether this cluster is suited to your specific vehicle, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Professional installation is recommended for those unfamiliar with automotive electrical systems. Elevate Your L405 Interior This digital cluster upgrade is one of the most impactful single changes you can make to the interior of a pre-facelift Range Rover Vogue. Explore our full collection of L405 interior upgrades — from Apple CarPlay screens to ambient lighting systems and carbon fibre trim. Shop All L405 Upgrades Use code 22GET20 for 20% off when you add any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover · Rear Entertainment 11.8" Android Rear Entertainment Screens for Land Rover Range Rover A matched pair of ultra-thin 11.8" Full HD Android 12 headrest screens — pre-loaded with a Land Rover interface theme, ready for Netflix, YouTube, and more via a simple 12V connection. L405 · L460 · L461 · L494 Android 12 11.8" Full HD IPS Sold as a Pair Google Play Store WiFi + Bluetooth Plug-and-Play 12V Aluminium Alloy Body Overview The Range Rover cabin is engineered around comfort — and for rear passengers, that expectation extends well beyond legroom. Whether you're covering motorway miles, heading to an airport, or keeping younger passengers occupied on longer journeys, the back of a Range Rover deserves entertainment that's genuinely worthy of the vehicle around it. These 11.8" Android Rear Entertainment Screens are built specifically for that brief. Running Android 12 with the full Google Play Store, they put Netflix, Prime Video, YouTube, Spotify, games, and more directly in front of rear passengers — on a cinema-quality 1920×1280 IPS display with a 2.5D curved aluminium alloy body that sits cleanly and confidently behind the front headrests. The pre-installed Land Rover interface theme ensures nothing about the experience looks or feels out of place inside a premium cabin. Connectivity options are comprehensive: built-in WiFi, 3G/4G dongle support, Bluetooth audio output, FM transmission, IR headset compatibility, and a 3.5mm audio jack give each passenger complete individual control. Power runs from any 12V source, and mounting brackets slip over existing headrest posts — no drilling, no permanent modifications, no specialist tools. Fit both screens in under an hour and transform every rear seat into something significantly more engaging. What's Included 📺 11.8" IPS Screens × 2 Full HD 1920×1280, Android 12, pre-paired as a set 🔧 Adjustable Mounting Brackets × 2 Headrest post mount, height-adjustable, tool-free fit 🔌 12V Power Cables & Hardware Full power connection accessories for both screens 📶 3G/4G Dongle Support Stream via phone hotspot or USB mobile data dongle 📄 Installation Guide Step-by-step printed setup instructions included Product Highlights 11.8" IPS Full HD display — 1920×1280 resolution, 15:10 aspect ratio for immersive viewing Android 12 OS with full Google Play Store access — Netflix, YouTube, Spotify and more Pre-installed Land Rover interface theme for a seamless, factory-consistent cabin feel Ultra-thin 2.5D curved aluminium alloy body — premium finish, minimal visual intrusion Built-in WiFi and 3G/4G dongle support — stream on the move without a separate device Bluetooth audio, FM transmission, 3.5mm jack, IR headset, and 2W built-in stereo speakers USB and SD card support with 1080p and 4K video decoding for offline media playback Smart ambient light sensor — display brightness auto-adjusts to cabin and external light Quad-Core ARM Cortex-A53, 1.5GB RAM, 8GB ROM — responsive, fluid everyday performance Sold as a matched pair — one dedicated full-featured screen per rear passenger seat Tech Specifications Operating System Android 12.0 Display 11.8" IPS, 1920×1280, 15:10 aspect ratio Processor Quad-Core ARM Cortex-A53 RAM / Storage 1.5GB RAM / 8GB ROM External Storage SD card support up to 128GB Connectivity WiFi, 3G/4G dongle (USB), Bluetooth, AV In/Out Audio Output Built-in 2W stereo speakers, 3.5mm jack, FM, IR headset, Bluetooth Power Input 12V DC Body Material Aluminium alloy, 2.5D curved glass Video Decoding 1080p Full HD / 4K supported Languages English, French, Spanish, German, Chinese, Japanese, Russian, Portuguese & more Quantity Sold as a pair (× 2 screens) Compatibility Model Generation Years Fitment Range Rover Vogue L405 2013–2021 ✓ Compatible Range Rover Sport L494 2013–2021 ✓ Compatible Range Rover Vogue L460 2022–2026 ✓ Compatible Range Rover Sport L461 2022–2026 ✓ Compatible Range Rover Evoque L538 2012–2018 ✓ Compatible Range Rover Evoque L551 2019–2026 ✓ Compatible Range Rover Velar L560 2018–2024 ✓ Compatible Land Rover Discovery 5 L462 2017–2026 ✓ Compatible Land Rover Defender L663 2020–2026 ⚠ Verify Headrest Type Mounting brackets are designed for standard dual-post headrest configurations. Compatible across all listed models and trim levels including SE, HSE, Autobiography, and SVR/SV. If you are unsure whether your specific vehicle or seat configuration qualifies, call our team on +44 203 943 9919 before ordering. Installation Notes ⚡ Easy  ·  30–60 Minutes  ·  No Special Tools Required Remove the front headrests. Lift both front seat headrests straight up and out of their guide posts. The mounting brackets will fit over these same posts — no modification to the seat, frame, or trim is required. Attach the mounting brackets. Slide the adjustable mounting brackets down over the headrest guide posts. Set the height so the screen will sit at a comfortable eye level for rear passengers, then tighten the thumbscrews firmly to lock the bracket in position. Mount the screens. Clip each screen unit onto its respective bracket. Use the bracket arm pivot to angle each display face toward the rear passenger for an optimal viewing position — typically a slight downward tilt works best. Refit the headrests. Slide the front headrests back into their guide posts above the brackets. The bracket body sits cleanly between the seat back and headrest with no interference to height adjustment or safety function. Connect the power. Route the supplied 12V power cable to the nearest available power source. The rear 12V socket is the simplest connection point. For a cleaner finish, the cable can be routed discreetly through the seat base gap or along the sill trim. Connect to WiFi and complete setup. Power on both screens, connect to your phone hotspot, in-car WiFi, or 4G dongle, sign into a Google account, and install your chosen apps directly from the Play Store. Both screens operate independently. Note: For a fully concealed cable run with no visible wiring, we recommend having a car audio or accessories specialist route the power feed through the seat base or door sill trim. This typically takes under 30 minutes and gives the installation a completely factory-fitted appearance. Every Journey. First Class. Whether it's the school run, a cross-country drive, or an airport transfer in the dark — rear passengers deserve an experience that genuinely matches the vehicle they're riding in. These screens deliver exactly that, without a single compromise to the cabin's premium look or feel. Backed by a 30-day money-back guarantee, 4.9★ from 12,300+ verified reviews, and worldwide shipping via DHL, FedEx, UPS, and TNT. Shop the Full Range Rover Collection → Use code 22GET20 for 20% off any two items ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide shipping · DHL, FedEx, UPS, TNT ↩️ 30-day money-back guarantee 📞 Expert advice Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and designations are referenced solely for product fitment identification purposes. Android and Google Play are trademarks of Google LLC. Netflix, YouTube, Spotify, Prime Video, and all other referenced app or service names are trademarks of their respective owners. App availability is subject to individual account and subscription requirements. Screen images shown are for illustration purposes only.

Victorious Automotive · Range Rover Sport / Vogue / Evoque · Infotainment Upgrades 10.25-Inch Android Screen Upgrade for Range Rover Sport, Vogue & Evoque Replace your factory infotainment display with a stunning 10.25-inch high-resolution Android screen — unlocking Apple CarPlay, Android Auto, Google Maps, Waze, Spotify and more, while keeping all original Land Rover functions fully intact. Range Rover Sport L494 Range Rover Vogue L405 Range Rover Evoque L538 2012–2017 10.25" Display Android 6.0 Apple CarPlay Android Auto Built-in WiFi Direct Fit Overview The Range Rover Sport, Vogue and Evoque models from 2012 to 2017 are exceptional vehicles — composed, capable and refined in almost every respect. But their factory infotainment systems were designed in an era before Waze, Spotify, Apple CarPlay and Android Auto became everyday essentials. The standard Land Rover InControl interface simply wasn't built to accommodate the apps and connectivity features that drivers now rely on daily. This 10.25-inch Android screen upgrade is engineered specifically to replace the factory unit with a seamless, high-resolution display that brings your Range Rover's interior firmly into the modern age. Running Android 6.0 on a Quad Core Cortex A9 processor with 2GB RAM and 32GB onboard storage, this head unit delivers tablet-grade performance within a factory-fit form factor — no cutting, no bodywork modifications, no compromise. The upgrade includes a free Apple CarPlay USB dongle, enabling full CarPlay and Android Auto functionality alongside native Android app access. Critically, your original Land Rover interface remains fully accessible at any time — simply press the NAV button to toggle back. Everything from your climate controls to your vehicle settings stays exactly as it was. This is an enhancement, not a replacement of character. What's Included 🖥️ 10.25" Android Head Unit 1280×480 anti-glare, anti-blue ray capacitive touchscreen 📱 Apple CarPlay USB Dongle Enables wired CarPlay and Android Auto connectivity 🔌 Vehicle-Specific Wiring Harness Plug-and-play fitment, no splicing required 🔧 Trim Surround & Fascia Matched to factory dash aesthetic for a clean finish 📋 Installation Guide Step-by-step printed instructions included 🎧 3.5mm Audio Output DSP EQ control with original sound system retained Product Highlights 10.25-inch 1280×480 high-resolution capacitive touchscreen with anti-glare nano-optical coating Apple CarPlay and Android Auto support via included USB dongle — iPhone and Android compatible Android 6.0 OS with Quad Core Cortex A9 processor — run Waze, Google Maps, Spotify and WhatsApp natively Full original Land Rover InControl interface preserved — press NAV at any time to switch back Built-in WiFi for real-time traffic, online music streaming and over-the-air app updates Bluetooth hands-free calling, music streaming and synchronised address book integration Mirror Link support for both iOS and Android — wired and wireless modes with mutual control 1080P video playback via USB 2.0 — supports MP4, AVI, MKV, MOV and more High-speed CAN bus integration — seamlessly communicates with your vehicle's original electronics 360° panorama camera and DVR input support — blind-spot monitoring and FCWS compatible Compatibility Vehicle Year Range Fitment Range Rover Vogue L405 2013–2015 Direct Fit Range Rover Sport L494 2013–2015 Direct Fit Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Sport HSE 2013–2016 Direct Fit Range Rover Vogue L405 2016–2020 Verify First Range Rover Sport L494 2016–2020 Verify First Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your exact specification? Send photos of your dashboard to us before ordering and we'll confirm fitment. Call +44 203 943 9919 Mon–Fri, 9am–7pm. Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–120 minutes Carefully remove the factory infotainment unit using trim removal tools to avoid damaging the surrounding dash panels. Disconnect the original wiring harness connectors from the rear of the factory unit. Connect the supplied vehicle-specific wiring harness to the new Android head unit — all connectors are keyed and labelled for straightforward installation. Seat the new 10.25-inch unit into the dash aperture and secure using the provided mounting hardware. Refit the trim surround and fascia panels, ensuring all clips engage cleanly. Connect the Apple CarPlay USB dongle to the designated USB port on the head unit. Power on the vehicle and run through the initial setup wizard to configure WiFi, language and display preferences. Test all original vehicle functions — climate, audio, navigation — by pressing the NAV button to verify the factory interface remains fully operational. ⚠ Important: Installation requires an intermediate level of DIY competence. We strongly recommend professional installation to protect both your vehicle and this product. Victorious Automotive cannot accept responsibility for damage resulting from non-professional installation. Installation support is available — contact us directly if you need guidance. Technical Specifications Specification Detail Screen Size 10.25 inches Resolution 1280 × 480 Operating System Android 6.0.1 Processor AC8227L Quad Core Cortex A9 @ 1.6GHz RAM 2GB DDR3 Storage 32GB eMMC 5.0 Wireless Built-in WiFi + Bluetooth CarPlay / Android Auto Via included USB dongle Video Playback Up to 1080P — MP4, AVI, MKV, MOV, FLV, TS Audio Formats MP3, WMA, APE, FLAC, AAC Languages English, French, German, Spanish, Italian, Russian, Portuguese, Swedish, Turkish, Korean, Japanese DVD Not included Upgrade Your Range Rover's Interior Today Over 12,300 verified customers trust Victorious Automotive for premium Range Rover and Land Rover upgrades. Worldwide shipping via DHL, FedEx and UPS. Backed by our 30-day money-back guarantee. Shop Range Rover Sport Upgrades Shop Range Rover Vogue Upgrades Shop Range Rover Evoque Upgrades Buy any 2 items and save 20% with code 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by or approved by Jaguar Land Rover Limited, Land Rover, Range Rover or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Vogue L405 · Exterior Lighting Rear Tail Lights for Range Rover SVO Autobiography Vogue L405 2013–2017 A direct-fit tail light upgrade that blends SVO Autobiography aesthetics with enhanced road visibility — purpose-built for the Range Rover Vogue L405 generation. Range Rover Vogue L405 2013–2017 SVO Autobiography Style Polycarbonate PC Lens 12V Direct Fit 6kg Per Pair CCC Certified Sold as a Pair Overview The Range Rover Vogue L405 is a vehicle that commands presence — a flagship SUV that set new benchmarks in luxury, refinement, and design when it launched in 2013. Whether you're running a standard SE, HSE, or Autobiography specification, the rear of this vehicle is one of its most recognisable design statements. Keeping those tail lights in optimal condition — both functionally and aesthetically — is an essential part of maintaining the standard this vehicle deserves. These SVO Autobiography-style rear tail lights are engineered as a precision replacement for the Range Rover Vogue L405, covering model years 2013 through to 2017. Constructed from high-grade polycarbonate (PC), the lenses offer outstanding clarity and long-term resistance to UV degradation, heat, and road debris — common failure points on factory units that have seen years of service. The housing is built to match OE fitment exactly, ensuring the assembly locates cleanly without modification or adapter brackets. The SVO Autobiography lamp cluster aesthetic elevates the rear of your Vogue with a look that mirrors the exclusive specification offered on top-tier L405 variants. If your current tail lights are faded, cracked, or simply no longer doing justice to the vehicle, this is the upgrade that restores — and improves — the rear presence your Range Rover was designed to project. What's Included 🔴 Left Rear Tail Light Driver-side assembly, SVO Autobiography style 🔴 Right Rear Tail Light Passenger-side assembly, matched pair 🔌 OE-Style Wiring Connectors Plug-and-play fitment, no splicing required 🔩 Mounting Hardware Fixing bolts and retaining clips included Product Highlights SVO Autobiography-inspired cluster design for a flagship rear appearance Direct replacement fit for Range Rover Vogue L405 2013–2017 High-grade polycarbonate (PC) lens construction for lasting clarity UV-resistant lens coating to prevent yellowing and hazing over time CCC certified — independently tested for quality and performance standards 12V system compatible — works with standard L405 electrical architecture Plug-and-play wiring connector for straightforward installation Robust housing withstands vibration, temperature cycling, and road impact Improved luminosity for enhanced road presence and rearward visibility Sold as a complete pair — left and right assemblies included Compatibility Vehicle Code Year Range Trim Fit Range Rover Vogue L405 2013–2017 SE / HSE / Autobiography Direct Fit Range Rover Vogue L405 2018–2021 All Trims (Facelift) Verify Before Purchase Range Rover Vogue L460 2022–2026 All Trims Not Compatible Range Rover Sport L494 2013–2022 All Trims Not Compatible Range Rover Velar L560 2018–2022 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Moderate  |  ⏱ Estimated Time: 45–90 Minutes  |  👤 1 Person Required Open the tailgate and locate the access panel on the interior trim lining behind each tail light assembly. Remove the trim panel carefully using a plastic pry tool to avoid cracking or scratching the interior finish. Disconnect the existing wiring harness connector from the rear of the OE tail light unit by pressing the locking tab and pulling firmly. Remove the retaining nuts (typically three per side) securing the tail light assembly to the bodywork. Keep these in a safe place. Gently pull the old tail light assembly forward and away from the body panel. Take care not to scratch the surrounding paintwork. Position the new tail light assembly into the aperture, ensuring the locating pins seat correctly before applying any pressure. Refit and hand-tighten the retaining nuts, then torque to the manufacturer's recommended setting. Do not over-tighten. Reconnect the wiring harness — the connector should click firmly into place. Test all lighting functions before refitting the trim panel. Refit the interior trim access panel and close the tailgate. Perform a final full lighting check before returning the vehicle to road use. ⚠ Important: Professional installation is strongly recommended if you are unfamiliar with automotive electrical work or trim removal on the L405 platform. Incorrect fitment may result in poor sealing, water ingress, or electrical faults. Always verify your exact model year and specification before fitting. If in doubt, contact us on +44 203 943 9919 before proceeding. Upgrade Your Range Rover's Rear Presence Victorious Automotive supplies premium lighting and exterior upgrades to Range Rover owners worldwide. With 12,300+ verified reviews and a 4.9/5 star rating, you're in trusted hands. Every order ships globally via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx / UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification. Always verify fitment against your specific vehicle VIN and specification before purchasing.

Victorious Automotive · Range Rover / Land Rover · Infotainment Upgrades Apple CarPlay & Android Auto Upgrade for Range Rover & Land Rover (2012–2018) — Plug & Play Android Box Bring full Apple CarPlay, Android Auto, Waze, Spotify and Netflix to your Range Rover or Land Rover infotainment screen — no cutting, no coding, true plug-and-play installation. Apple CarPlay Android Auto Plug & Play 2012–2018 Range Rover Vogue Range Rover Sport Range Rover Evoque Discovery 4 Land Rover Freelander 2 Jaguar XF / XJ Android 6.0 Quad Core 1.6GHz 2GB RAM / 16GB ROM Overview Range Rover and Land Rover vehicles produced between 2012 and 2018 came equipped with the InControl Touch infotainment platform — a capable system for its era, but one that was never designed with today's connected driving in mind. Native support for Spotify, Waze, Google Maps, WhatsApp or any third-party app simply isn't possible through the factory interface, leaving owners of some of the finest SUVs on the road with a surprisingly limited digital experience. This Android Box upgrade resolves that entirely. Wiring directly into your vehicle's existing infotainment harness, it overlays a fully functional Android 6.0 environment onto your factory screen — no screen replacement, no permanent modification. From the moment it's connected, your Range Rover or Land Rover gains access to Apple CarPlay and Android Auto via the included USB dongle, plus standalone Android tablet functionality including streaming apps, browser access, and full Google Play compatibility. Crucially, your original InControl system remains completely intact. The Android overlay can be exited at any time simply by pressing the NAV button on your factory controls, returning the vehicle to its standard interface. Climate controls, parking sensors, vehicle settings and all factory functions continue to operate exactly as Land Rover intended — this upgrade adds capability, it doesn't remove anything. What's Included 📦 Android Interface Box Quad Core 1.6GHz, 2GB RAM, 16GB ROM 🔌 CarPlay / Android Auto USB Dongle Enables wireless CarPlay & Android Auto interface 🔗 Vehicle-Specific Wiring Harness Direct-fit plug connection — no cutting required 🗺️ Pre-loaded Navigation Maps IGO9, TomTom, Garmin or Sygic (advise region required) 📖 Installation Support Video guides included; email support available Product Highlights Full Apple CarPlay support via included USB dongle — iPhone mirror on factory screen Full Android Auto support — Google Maps, Waze, Spotify, WhatsApp and more Standalone Android 6.0 tablet mode — YouTube, Netflix, browser, Google Play One-press return to factory InControl interface via NAV button — no settings menu required Powerful T3 Quad Core 1.6GHz CPU for fast, responsive performance 2GB DDR3 RAM and 16GB internal storage for smooth multitasking Internal Mirror-Link for direct smartphone screen mirroring Dual USB input slots — connect phone and storage simultaneously Supports external hard drives up to 1TB for media playback TPMS built-in support and dynamic reversing sensor integration Vehicle Compatibility Vehicle Year Range Fitment Range Rover Vogue (L405) 2012–2017 Direct Fit Range Rover Sport (L494) 2013–2017 Direct Fit Range Rover Evoque (L538) 2011–2015 Direct Fit Land Rover Discovery 4 2012–2016 Direct Fit Land Rover Discovery Sport (Dual View) 2015+ Direct Fit Land Rover Freelander 2 2013–2015 Direct Fit Jaguar XF 2012–2015 Direct Fit Jaguar XJ 2012–2015 Direct Fit Range Rover Sport (L461) 2022+ 2022–2026 Not Compatible Range Rover Vogue (L460) 2022+ 2022–2026 Not Compatible Defender L663 (2020+) 2020–2026 Not Compatible Not sure if this fits your exact vehicle? Send dashboard photos to sales@victorious.shop and our team will confirm fitment before you order. Installation Notes Difficulty: Intermediate  |  Estimated Time: 45–90 minutes Remove the factory infotainment head unit from the dashboard using appropriate trim tools (refer to vehicle-specific guides). Locate the factory infotainment harness connector at the rear of the head unit. Connect the vehicle-specific wiring harness from the Android box inline between the factory connector and the head unit — no cutting required. Mount the Android box in a suitable location behind the dashboard with adequate ventilation. Insert the CarPlay / Android Auto USB dongle into one of the dual USB ports on the Android box. Reassemble the dashboard trim and power on the vehicle to confirm the interface loads correctly. Pair your iPhone or Android device via the dongle and launch your preferred CarPlay or Android Auto session. Press NAV at any time to return to the standard Land Rover InControl interface. ⚠ Important: Installation requires a degree of confidence working behind vehicle trim panels and infotainment hardware. We strongly recommend professional installation by a qualified auto electrician. Victorious Automotive accepts no responsibility for damage caused during DIY installation. Full email installation support is available at sales@victorious.shop — we're here to help. Technical Specifications Specification Detail Operating System Android 6.0.1 Processor T3 Quad Core 1.6GHz RAM 2GB DDR3 Internal Storage 16GB iNAND External Storage Support Up to 1TB via USB CarPlay / Android Auto Via included USB dongle Smartphone Compatibility iOS 9.1+ / Android 5.1+ USB Inputs Dual USB slot Mirror-Link Internal (included) Navigation Maps IGO9, TomTom, Garmin, Sygic Touchscreen Five-point touch via factory screen TPMS Built-in support Reversing Sensor Dynamic overlay supported Media Formats JPG, JPEG, BMP, GIF, MP4 and more Upgrade Your Range Rover's Infotainment Today Your Range Rover deserves a connected experience that matches its capability. This plug-and-play upgrade is one of the most impactful changes you can make to a 2012–2018 InControl-equipped Land Rover or Range Rover — without touching a single factory wire permanently. Shop Range Rover Vogue Upgrades Shop Range Rover Sport Upgrades Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Apple Inc., or Google LLC. All vehicle model names, trademarks and brand identifiers are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC.

Victorious Automotive · Range Rover Velar · Interior Trim Range Rover Door Trim Set — Silver Chrome Interior Decoration for 2018–2019 Models A precision-engineered ABS chrome door trim set that elevates the interior of your 2018–2019 Range Rover with a seamless silver finish and factory-matched fitment. 2018–2019 Models Chromium Styling ABS Material Silver Chrome Finish Door Air Vent Trim No Drilling Required CCC Certified 3kg Overview The Range Rover is one of the most considered vehicles on the road — every surface, every material choice, and every detail speaks to the owner's standards. The interior door panels are no exception. Whether you're stepping into a 2018 or 2019 model, the door trim lines are prominent, tactile, and immediately visible to every occupant in the cabin. This door trim decoration set introduces a polished silver chrome line finish across the side door surfaces, adding a layer of visual refinement that complements the Range Rover's existing design language without overwhelming it. Manufactured from durable ABS with a chromium-style coating, the trim is built to resist everyday wear, UV exposure, and the temperature swings that come with British and international climates alike. Designed specifically for 2018–2019 model year fitment, these trims align precisely with the factory door panel contours and air vent surrounds — no cutting, no modification, and no compromise on the finished result. For owners who want their interior to reflect the same attention to detail as the rest of the vehicle, this trim set is a straightforward and impactful upgrade. What's Included 🪟 Door Trim Set Full set — 1 complete kit for all door panels 📋 Installation Guide Step-by-step fitting instructions included 🔧 Adhesive Backing Pre-applied 3M-grade bonding tape for secure fit 🛡️ Protective Film Surface protection film to prevent transit scratches Product Highlights Precision-engineered for 2018–2019 Range Rover models — direct fit, no modifications needed Polished silver chrome finish adds a premium, bespoke quality to the door interior High-grade ABS construction offers durability against heat, UV, and daily use Designed to align perfectly with factory door air vent surrounds and panel lines Adhesive bonding system ensures a firm, rattle-free installation CCC certified — manufactured to recognised quality and safety standards Lightweight at 3kg — no impact on door operation or mechanism Reversible installation — can be removed cleanly without damaging original trim Compatible with both short and long wheelbase variants (verify before ordering) Immediately transforms the feel of the cabin with minimal effort or cost Compatibility Model Year Range Variant Fitment Range Rover Velar 2018–2019 Standard Wheelbase Direct Fit Range Rover Velar 2018–2019 R-Dynamic Direct Fit Range Rover Vogue L405 2018–2019 Standard Wheelbase Direct Fit Range Rover Vogue L405 2018–2019 Long Wheelbase Direct Fit Range Rover Sport L494 2018–2019 All Trims Direct Fit Range Rover Vogue L460 2022–2026 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: None Clean the target door trim surfaces thoroughly with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesion and a clean bond line. Dry-fit each trim piece to the door panel before committing to adhesion. Confirm alignment with the air vent surrounds and panel contours. Peel back a small section of the protective backing tape on the first trim piece and carefully position it against the door panel, working from one end to the other to avoid air bubbles. Apply firm, even pressure across the full length of each trim piece for at least 30 seconds. Use a soft cloth or trim tool to press into any contoured areas. Repeat for remaining door panels. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain or a car wash. Once all pieces are installed, inspect from multiple angles in natural light to confirm consistent alignment and finish. ⚠ Important: Please confirm your exact wheelbase and trim variant before installation. Applying adhesive trim to an incorrect panel position may affect fitment and removal. Professional installation is recommended if you are unsure of your vehicle's specific door panel configuration. Upgrade Your Range Rover Interior Today Trusted by over 12,300 Land Rover and Range Rover owners worldwide, Victorious Automotive is the go-to specialist for interior and exterior upgrades that match the standard your vehicle was built to. This door trim set ships globally via DHL, FedEx, UPS, and TNT — fully tracked and protected. Shop Range Rover Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Lighting Range Rover Vogue L405 2013–2020 Rear Tail Light Aftermarket Upgrade — 2018 Facelift Style Give your pre-facelift L405 the refined rear-end aesthetic of the 2018 model year — with a precision-fit pair of aftermarket tail lights built to OEM standards. Range Rover Vogue L405 2013–2020 2018 Facelift Style Rear Tail Lights Left & Right Pair OEM Quality ISO 9001 Certified Direct Fit No Modification Required Overview The Range Rover Vogue L405 is one of Land Rover's most celebrated full-size luxury SUVs — a vehicle that commands presence on every road it travels. Introduced in 2013 and comprehensively refreshed in 2018, the L405 facelift brought with it a distinctly sharper, more sculpted rear light signature that transformed the vehicle's after-dark identity. If your Vogue is a 2013–2017 model, you'll know exactly what we're talking about. These aftermarket rear tail lights are engineered to replicate the 2018 facelift design language in precise detail — giving your earlier L405 a thoroughly modern rear appearance without any structural modification to your vehicle. Every lens, housing contour, and light element has been developed to mirror the factory facelift unit, ensuring the visual upgrade is seamless and convincing from every angle. Built to ISO 9001 certified manufacturing standards with OEM-grade materials, these lights aren't a cosmetic compromise — they're a genuine quality upgrade. Whether you're refreshing an older Vogue for personal satisfaction or preparing it for resale, this is one of the most impactful single changes you can make to the exterior of the L405. What's Included 🔴 Left Rear Tail Light Driver-side unit, 2018 facelift style housing 🔴 Right Rear Tail Light Passenger-side unit, matched facelift design 📦 Protective Packaging Individually secured for safe international transit 🔧 Fitment Hardware Mounting points align with OEM positions Product Highlights Replicates the 2018 L405 facelift rear light design in precise detail ISO 9001 certified manufacturing — quality assured at every stage OEM-grade materials ensure durability across all weather conditions Direct-fit installation — no cutting, drilling, or modification required Supplied as a matched left and right pair for consistent appearance Factory wiring connector compatibility for plug-and-play fitment UV-stabilised lens housing resists yellowing and fading over time Significantly updates the rear-end aesthetic of pre-facelift models Ideal for owners upgrading a 2013–2017 Vogue to facelift specification Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 (Pre-Facelift) Direct Fit Range Rover Vogue L405 2018–2020 (Post-Facelift) Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Intermediate  |  ⏱ Estimated Time: 45–90 Minutes  |  👤 1 Person Required Open the tailgate fully and locate the interior trim panel covering the tail light mounting points on both sides of the boot aperture. Carefully remove the trim panel using a trim removal tool to expose the rear light retaining bolts and wiring connector. Disconnect the factory wiring harness connector from the existing tail light unit — press the release tab firmly before pulling. Remove the retaining bolts (typically 3 per side) and gently pull the original tail light unit away from the body aperture. Align the new facelift-style tail light unit into the aperture, ensuring all mounting studs are correctly seated before applying torque. Reconnect the wiring harness until the connector clicks firmly into place, then refit the retaining bolts and trim panel. Repeat on the opposite side, then test all light functions — stop, indicator, reverse, and running lights — before driving. ⚠ Important: Professional installation is recommended if you are unfamiliar with automotive electrical systems. Always verify that all light functions operate correctly before using the vehicle on public roads. Check local regulations regarding aftermarket lighting compliance in your region prior to installation. Upgrade Your L405 — The Right Way Join over 12,300 Range Rover owners who trust Victorious Automotive for premium, precision-engineered upgrades. Browse the full L405 collection or speak to our team directly. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Range Rover Vogue 2018–2020 Full Autobiography Exterior Pack (L405) Transform your L405 Vogue into a full Autobiography-specification presence with this precision-fitted five-piece exterior styling pack — finished in gloss black and silver. L405 Vogue 2018–2020 Autobiography Style ABS Construction Black + Silver Finish 5-Piece Kit No Drilling Required Direct Fit Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs ever built — a vehicle that carries its presence with quiet authority. From its 2018 facelift through to the final 2020 production year, the L405 platform refined an already exceptional formula, and for owners who want their exterior specification to reflect the pinnacle Autobiography grade, this exterior pack delivers exactly that. This Full Autobiography Exterior Pack is engineered as a complete five-piece styling upgrade that mirrors the visual language of the factory Autobiography trim. The kit covers the front grille surround, mesh side vents, side grille inserts, and rear door trim moulding — five carefully considered components that together create a cohesive, elevated look across the vehicle's exterior. The dual-tone black and silver finish complements both lighter and darker factory body colours with equal effect. Constructed from high-grade ABS — the same class of material used in OEM exterior trim — each piece is moulded to match factory panel lines with precision. The result is a finish that reads as factory-fitted rather than aftermarket, which is exactly what the most discerning Range Rover owners expect. Installation requires no drilling or permanent modification, making this one of the most impactful and reversible exterior upgrades available for the 2018–2020 L405. What's Included 🔲 Front Grille Surround Autobiography-style gloss black and silver finish 🔳 Mesh Side Vents Precision-cut mesh inserts, left and right ▪️ Side Grille Inserts Replaces standard side grille trim pieces 🚪 Rear Door Trim Moulding Kit Completes the Autobiography exterior look at the rear 📦 Fitting Hardware All necessary clips and adhesive included Product Highlights Replicates factory Autobiography exterior specification High-grade ABS construction for durability and rigidity Gloss black and silver dual-tone finish throughout Five-piece complete kit — front, sides, and rear covered No drilling or permanent modification required Direct panel-line fitment for an OEM-quality appearance Brand new — supplied in original packaging Resistant to UV fading and standard road conditions Compatible with both standard and long-wheelbase L405 Reversible installation — original trim fully restorable Compatibility Vehicle Year Range Trim Grade Fitment Range Rover Vogue L405 2018–2020 Vogue / SE / HSE Direct Fit Range Rover Vogue L405 2018–2020 Autobiography (factory) Not Required Range Rover Vogue L405 2013–2017 (Pre-facelift) All Grades Not Compatible Range Rover Sport L494 2013–2022 All Grades Not Compatible Range Rover Vogue L460 2022–2026 All Grades Not Compatible Range Rover Velar 2018–2022 All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tool, clean microfibre cloth Thoroughly clean all exterior trim areas where the new pieces will be fitted. Remove any wax, grease, or polish residue using an isopropyl alcohol wipe to ensure strong adhesion. Using a plastic trim removal tool, carefully unclip and remove the existing front grille surround trim from the vehicle. Work gently from each corner inward to avoid stressing the factory clips. Align the new Autobiography-style front grille surround and press firmly into the factory clip positions until all retention points are fully seated and flush. Remove the existing mesh side vent covers from both the driver and passenger sides. Fit the new mesh vent inserts by aligning the tabs and pressing into place — no adhesive required for these pieces. Replace the side grille inserts by unclipping the originals and snapping the new inserts into position. Check alignment against the body panel before applying full pressure. Fit the rear door trim moulding kit by peeling the protective backing from the adhesive strip, aligning carefully with the existing factory trim line, and pressing firmly across the full length for 30 seconds to ensure bonding. Step back and visually inspect all five pieces for alignment and fitment. Apply light pressure to any panel that does not sit fully flush. ⚠ Important: This kit is designed exclusively for the 2018–2020 L405 Range Rover Vogue post-facelift. Attempting to fit this pack to pre-facelift or alternative models may result in poor fitment. Always confirm your vehicle's production year before installation. Fitting in temperatures below 10°C may reduce adhesive performance — allow the vehicle to warm in a garage before fitting if necessary. Elevate Your L405 to Autobiography Standard For 2018–2020 Range Rover Vogue owners, this is one of the most complete and visually impactful exterior upgrades available. Browse our full L405 collection for complementary interior and exterior accessories. Shop All L405 Vogue Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Range Rover Vogue 2018-Style Front Grille for L405 Model Years 2013–2017 Bring your early L405 Vogue in line with the refined facelift aesthetic — a precise, direct-fit grille upgrade engineered in premium TPU with zero compromise on fitment or finish. L405 Vogue 2013–2017 Premium TPU Black / Silver Direct Fit Facelift Style Exterior Upgrade No Cutting Required Overview The Range Rover Vogue L405 is one of the most architecturally composed full-size SUVs ever produced. Launched in 2013, its pre-facelift front end remains elegant — but Land Rover's 2018 refresh brought a more assertive, horizontal grille design that sharpened the entire face of the vehicle. For owners of 2013–2017 L405 models, that visual gap between generations has always felt within reach. Now it is. This 2018-style front grille is precision-engineered to replace the original pre-facelift unit on the L405 Range Rover Vogue without modification to the vehicle's bodywork. Constructed from high-grade TPU — a flexible yet structurally resilient polymer — it replicates the refined horizontal slat profile of the post-facelift grille in both Black and Silver finishes, allowing you to match or contrast your exterior colour scheme exactly as you choose. This isn't a cosmetic shortcut. The fitment has been designed with the pre-facelift L405 mounting points in mind, meaning no drilling, no cutting, and no permanent alteration to your vehicle. Whether you're refreshing a daily driver or preserving the investment of a cherished Vogue, this upgrade delivers a measurable, head-turning improvement in presence — at a fraction of the cost of a factory facelift conversion. What's Included 🔲 2018-Style Front Grille 1 unit — Black or Silver finish as selected 📋 Fitment Guide Installation reference included in packaging Note: The Range Rover brand logo badge is not included. Your existing badge can be transferred from the original grille where applicable. Product Highlights Engineered to match 2018 facelift grille dimensions precisely Premium TPU construction — flexible, durable, temperature-resistant Available in Gloss Black and Silver to suit any exterior Direct-fit replacement — no drilling or cutting required Retains original mounting points for a clean, factory-style install Horizontal slat design mirrors the post-facelift L405 aesthetic Lightweight construction — no added stress on bumper mounts Weather-resistant finish maintains appearance in all climates Badge aperture accommodates standard L405 emblem transfer Significant visual refresh at a fraction of a full facelift cost Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 2013–2014 Direct Fit Range Rover Vogue L405 2015–2016 Direct Fit Range Rover Vogue L405 2017 Direct Fit Range Rover Vogue (Facelift) L405 2018–2021 Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Beginner  |  ⏱ Estimated Time: 45–75 Minutes  |  Tools Required: Trim removal tool, T20 Torx screwdriver Ensure the vehicle is parked on a flat surface and the engine is fully off and cool before beginning. Open the bonnet and locate the upper grille retaining clips and screws along the top edge of the front bumper assembly. Using a plastic trim removal tool, carefully release the grille clips working from the centre outward to avoid stressing the surrounding paintwork or bumper trim. Remove any Torx fasteners securing the grille to the bumper frame. Retain all hardware for reinstallation. Detach the original grille and transfer your existing Range Rover badge (if applicable) to the new 2018-style grille unit. Align the new grille into position, ensuring all clip points and mounting tabs are seated correctly before applying pressure. Refit Torx fasteners and press all clips firmly until fully engaged. Check alignment from a distance before closing the bonnet. ⚠ Important: Take time to verify alignment before fully securing all fixings. Asymmetric fitment can affect both appearance and the integrity of the surrounding bumper trim. If you are unsure at any stage, we recommend consulting a professional installer. Complete Your L405 Vogue Browse our full collection of Range Rover Vogue L405 exterior accessories — curated for owners who expect more from every detail. Shop L405 Vogue Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners. Always verify fitment against your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling 5-Piece Black Front Bumper Hood Centre Grille with Air Vents — Range Rover Vogue L405 (2014–2016) A precisely engineered, full front-end grille kit that delivers a bold, cohesive aesthetic upgrade to your Range Rover Vogue L405 — with integrated air vents to maintain optimal airflow at every speed. Range Rover Vogue L405 2014–2016 ABS Material Gloss Black 5-Piece Kit Integrated Air Vents Direct Replacement No Drilling Required Overview The Range Rover Vogue L405 — produced between 2013 and 2020 — is one of the most recognisable luxury SUVs on the road. Its commanding proportions and precisely sculpted front end set expectations high from the first glance. For owners of the 2014 to 2016 model year, the factory front grille and air vent arrangement, while refined, can benefit from a more assertive, purposeful appearance — particularly as the wider Range Rover design language has continued to evolve. This 5-piece Black Front Bumper Hood Centre Grille with Air Vents Kit is engineered specifically for the L405 Vogue. The centre grille and four matching air vents are crafted from high-grade ABS thermoplastic and finished in a deep gloss black — a finish that reads as intentional and factory-level in its execution. The Transformers-inspired design adds structured geometry to the front fascia without compromising the vehicle's inherent elegance. Each piece in this kit is shaped to the contours of the 2014–2016 L405 front bumper, meaning fitment is clean and alignment is consistent. The integrated air vents are not merely decorative — they maintain the functional purpose of the original openings, ensuring your engine and braking systems continue to receive adequate cooling airflow. This is an upgrade that respects the engineering of your vehicle while elevating what the eye first encounters. What's Included 🔲 Front Hood Centre Grille 1x gloss black ABS grille panel — main centrepiece of the kit 🌬️ Bumper Air Vents 4x matching black ABS air vents for left, right, upper and lower positions 🔩 Mounting Hardware Clip and fixing hardware for secure, rattle-free fitment 📄 Fitment Guide Reference instructions to assist with correct alignment during installation Product Highlights Engineered exclusively for Range Rover Vogue L405 2014–2016 — no universal fitment compromises High-grade ABS thermoplastic construction — resistant to UV degradation, moisture and road debris Deep gloss black finish — consistent sheen that holds up over time without peeling or fading Integrated air vents maintain active airflow — no compromise on engine bay or brake cooling Transformers-inspired geometry adds structural drama to the front fascia Direct replacement fitment — mounts to OEM fixing points without drilling or cutting Lightweight ABS construction — no added load on front bumper support structure Complete 5-piece coordinated kit — no mixing of finishes or sourcing individual pieces separately Enhances visual continuity between the bonnet, bumper and lower fascia Pairs cleanly with other black exterior trim upgrades for a cohesive front-end transformation Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2016 Direct Fit Range Rover Vogue L405 2013 Verify Before Purchase Range Rover Vogue L405 2017–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Trim removal tools, flathead screwdriver, clean microfibre cloths Ensure the vehicle is parked on a flat, stable surface with the engine fully cooled. Disconnect the battery if your bumper features integrated sensors or lighting. Using a trim removal tool, carefully unclip the existing front centre grille from the bumper assembly. Work methodically from the outer edges inward to avoid cracking the surrounding trim. Remove each of the four factory air vents using the same technique — note the orientation of each vent before removal to ensure the replacements are seated correctly. Clean all mounting channels and recesses with a microfibre cloth to remove dust and debris before fitting new components. Begin with the centre grille — align to the OEM fixing points and press firmly until each clip engages with an audible click. Do not force; if resistance is felt, recheck alignment. Fit each of the four air vents in turn, ensuring flush alignment with the surrounding bumper surface. Check from the front of the vehicle to confirm even gaps on all sides. Reconnect the battery if disconnected. Step back and inspect the completed fitment from distance to confirm visual alignment across all five pieces. Note: Professional installation is recommended if you are unfamiliar with trim removal on the L405 platform. Forcing clips or misaligning panels can cause stress fractures to the bumper surround. If your vehicle is fitted with front parking sensors or active grille shutters, consult a qualified technician before proceeding. Upgrade Your Range Rover Vogue Explore the full range of exterior styling accessories for the Range Rover Vogue L405 — from bonnet trim to side vents and beyond. Every piece is selected to meet the standards your vehicle was built to. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover · Front Grilles Front Mesh Grille for Range Rover 2018–2019 — Black & Silver ABS Upgrade A precision-engineered mesh front grille that refreshes the face of your 2018–2019 Range Rover with a sharper, more aggressive stance — without compromising fit or finish. Range Rover 2018–2019 Direct Fit ABS Construction Black & Silver Mesh Design No Drilling Required Racing Grille Style Exterior Styling Overview The 2018–2019 Range Rover is already one of the most commanding presences on the road — an icon of British engineering that blends luxury with genuine capability. But for owners who want their vehicle to reflect a more purposeful, contemporary aesthetic, the factory grille can feel understated. This mesh front grille replacement is designed specifically for those who want to sharpen the visual signature of their Range Rover without embarking on a full bodywork project. Manufactured from high-grade ABS polymer, this grille is built to withstand the rigours of daily use — resistant to UV degradation, minor road debris impact, and the thermal stress that comes with year-round driving. The black and silver mesh finish is clean and considered, sitting sympathetically alongside the existing chrome and body-coloured trim lines of the 2018–2019 model year rather than clashing with them. Fitment is designed to be a direct replacement for the original grille assembly, using existing mounting points for a seamless, rattle-free result. No specialist tools or modifications to the bumper structure are required. If you're comfortable with basic trim removal, this is a genuine weekend upgrade that transforms how your Range Rover looks at the kerb — and on the road. What's Included 🔲 Front Mesh Grille Pre-finished in black & silver, individually packed and ready to fit 📦 Protective Packaging Individually boxed to prevent transit damage 📋 Fitting Guidance General installation instructions included Note: Front badge / emblem is not included. Existing badge from your original grille can be transferred where compatible. Product Highlights Precision-engineered for a direct OEM-style fit on 2018 and 2019 Range Rover models High-grade ABS construction — lightweight, impact-resistant and UV stable Black and silver finish complements factory chrome and body trim lines Contemporary mesh pattern adds a sportier, more aggressive front-end character No drilling, cutting or permanent modifications required for installation Uses existing mounting points for a secure, vibration-free fitment Aerodynamically neutral design — no negative effect on cooling or airflow Easy to clean and maintain alongside standard exterior wash routines Shipped individually packed to arrive in showroom condition Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Year Range Trim / Variant Fitment Range Rover Vogue (L405) 2018–2019 SE, HSE, Autobiography, SVAutobiography Direct Fit Range Rover Vogue (L405) 2013–2017 All Variants Verify Before Purchase Range Rover Vogue (L405) 2020 All Variants Verify Before Purchase Range Rover Sport (L494) 2018–2019 All Variants Not Compatible Range Rover Velar 2018–2019 All Variants Not Compatible Range Rover Vogue (L460) 2022–2026 All Variants Not Compatible Defender (L663) 2020–2026 All Variants Not Compatible If your exact model year or build is not listed above, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. We're happy to confirm fitment. Installation Notes 🔧 Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tool, flathead screwdriver, clean cloth Ensure the vehicle is parked on a flat, stable surface with the engine off and cooled down. Open the bonnet for easier access to upper grille mounting points. Using a plastic trim removal tool, carefully unclip the factory grille from the front bumper assembly. Work from one edge inward to avoid cracking the surround — do not force any clips. Disconnect any wiring if applicable (e.g. sensors or camera harnesses routed behind the grille). Note the connector positions before removal. Remove any badges or emblems from the original grille that you wish to transfer. Set them aside in a safe location. Align the new mesh grille with the factory mounting points. Press firmly and evenly along each clip until you hear and feel it seat fully — check each point twice. Reattach any wiring connectors that were disconnected in Step 3. Ensure no cables are pinched or tensioned behind the grille. Refit any badges you wish to carry over. Step back and visually confirm panel alignment with the bumper and bonnet line before closing the bonnet. ⚠ Important: The front badge is not included with this grille. If your original badge uses adhesive backing, it may not transfer cleanly — have a suitable adhesive promoter available. If you are not confident with trim removal, we recommend having the grille fitted by a detailer or bodyshop to protect surrounding panels. Complete Your Range Rover's Look Thousands of Range Rover owners across the UK and worldwide trust Victorious Automotive to supply the parts that make a real difference — parts that fit properly, look the part, and last. Browse our full Range Rover Vogue collection for complementary exterior upgrades. Shop Range Rover Vogue Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styled accessories for Land Rover, Range Rover and Defender vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle build before purchase.

Victorious Automotive · Land Rover Discovery 5 & Range Rover · Exterior Trim Carbon Fiber Door Handle Covers for 2017–2021 Land Rover Discovery 5 & Range Rover A precision-fit carbon fiber upgrade that transforms your door handles into a visual focal point — no paint, no professional fitting, no compromise. Discovery 5 L462 Range Rover L405 2017–2021 Real Carbon Fiber 3M Adhesive Fit UV Resistant Set of 4–8 No Drilling Overview The 2017–2021 Land Rover Discovery 5 and Range Rover are vehicles built with a clear design language — commanding, considered, and refined. The door handles, while functional, are one of the few exterior details that benefit most from a well-chosen upgrade. These carbon fiber door handle covers are engineered specifically for that purpose: to close the gap between factory specification and the kind of finish that turns heads at a standstill. Each cover is crafted from genuine carbon fiber with a high-gloss lacquer finish, capturing the distinctive woven texture that carbon fibre enthusiasts expect. Lightweight by nature yet rigid under daily use, the material resists UV degradation, moisture ingress, and the kind of road debris that dulls lesser finishes over time. The result is a component that looks purposeful and performs quietly — exactly how a Land Rover owner prefers it. Fitment is handled via pre-applied 3M automotive-grade adhesive tape, meaning the entire installation process takes place on your driveway without tools, specialists, or risk to your vehicle's paintwork. Whether you're refining a daily driver or building a specification-level Discovery 5, these covers deliver a noticeable visual step-up with minimal effort required. What's Included 🪶 Carbon Fiber Door Handle Covers Set of 4–8 covers depending on configuration; genuine carbon fiber with gloss lacquer 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade 3M tape bonded to each cover for a clean, tool-free installation 📄 Installation Guide Step-by-step instructions for a professional finish from first attempt 🧹 Surface Prep Wipe Included cleaning wipe to degrease door handle surfaces prior to fitting Product Highlights Genuine carbon fiber construction — not ABS with carbon-look wrap High-gloss lacquer protects the weave and adds depth to the finish UV-resistant coating prevents fading, yellowing, or surface degradation Waterproof and resistant to road grime, bird lime, and light impacts Lightweight profile adds no meaningful weight to your door panels No drilling, cutting, or modification to your vehicle required 3M automotive adhesive provides a permanent, weather-proof bond Precision-moulded to follow the exact contour of Discovery 5 handles Compatible with both 4-door and extended configurations as applicable Brand new — supplied in protective packaging, ready to install Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2022 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 / L551 2011–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your vehicle in a dry, sheltered environment. A garage or covered driveway is ideal — avoid fitting in direct sunlight or cold temperatures below 10°C as this affects adhesive performance. Thoroughly clean each door handle with the included prep wipe, removing all grease, wax, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit each carbon fiber cover to its corresponding handle to confirm alignment and coverage. Each cover is shaped to a specific position — take a moment to familiarise yourself before committing. Peel the backing from the 3M adhesive tape on the underside of the first cover. Align the cover carefully to the handle, press firmly from the centre outward, and hold for 30–60 seconds to activate the bond. Repeat for all remaining covers. Do not wash the vehicle or expose the adhesive to water for at least 24 hours following installation to allow full cure. ⚠ Important: Confirm your exact vehicle variant and year of manufacture before ordering. Handle profiles can vary between model years and trim levels. If you are unsure of compatibility, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Upgrade Your Discovery or Range Rover Today Join over 12,300 verified Land Rover and Range Rover owners who trust Victorious Automotive for premium exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purposes of fitment identification. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Range Rover Vogue L405 / Sport L494 · Steering Controls Steering Wheel Switch Upgrade for Range Rover L405 & L494 — 2013–2017 (2018-Style Fitment) Restore and refine your steering wheel controls with premium ABS and metal switches engineered to slot directly into your 2013–2017 Range Rover — delivering the clean, responsive feel your cabin deserves. L405 Vogue L494 Sport Discovery 5 LR5 2013–2019 ABS & Metal Direct Plug-In No Gaps Fast Response OEM-Style Fitment Overview The Range Rover Vogue L405 and Sport L494 represent two of Land Rover's most accomplished generations — vehicles that reward their owners with a cabin environment that feels genuinely curated. Over time, however, the steering wheel controls are among the first touchpoints to show wear. Faded legends, sluggish button response, or physical deterioration can quietly undermine the experience every time you get behind the wheel. These steering wheel switches are purpose-built for 2013–2017 L405 and L494 models, and are also compatible with the Discovery 5 LR5 from 2017–2019. Constructed from a combination of high-grade ABS and metal, they replicate the original form factor with precision — sitting flush within your steering wheel's existing cutouts without gaps, misalignment, or compromise. The button legends are crisp and clear, the travel is satisfying, and the electrical response is immediate. Unlike aftermarket parts that require wiring modifications or bracket adapters, these switches connect directly through your vehicle's existing wiring harness. The result is a factory-fresh feel that restores confidence to one of the most frequently used interfaces in the entire cabin — with no evidence that a replacement was ever needed. What's Included 🎛️ Left Steering Switch Driver-side control panel — media, phone & cruise functions 🎛️ Right Steering Switch Passenger-side panel — volume, voice & menu navigation Product Highlights Precision-engineered fitment for L405 and L494 steering wheel housings 2018-style switch design — a subtle, modern upgrade over the original Premium ABS shell with metal contacts for long-term durability Clear, legible button legends with excellent tactile definition Direct plug-in installation — uses your vehicle's existing wiring harness No gaps, no misalignment — seats flush within original steering wheel cutouts Fast electrical response with no input lag or interference Wear-resistant surface finish maintains appearance over extended use Compatible with Discovery 5 LR5 (2017–2019) as a direct replacement Sold as a pair — complete left and right switch set included Compatibility Vehicle Code Years Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Discovery 5 / LR5 L462 2017–2019 Direct Fit Range Rover Vogue L405 2018–2021 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: Trim removal tool, clean cloth Ensure your vehicle is parked safely with the ignition switched off and the key removed before beginning any work near the steering column. Using a trim removal tool, carefully prise the existing steering wheel switch panels away from their housing — working from the edges inward to avoid cracking the surrounding trim. Locate the wiring connectors on the rear of each switch and gently disconnect them by pressing the release tab and pulling straight back — do not tug on the wiring itself. Compare the new switches against the originals to confirm orientation, then connect each new switch to its corresponding wiring plug until you hear or feel it click into place. Seat each switch panel back into the steering wheel housing, applying even pressure across the face until it sits flush and all retaining clips engage. Restore the ignition and test all switch functions — cruise control, media, volume, and voice commands — to confirm full operation before driving. ⚠ Please Note: Always confirm your exact vehicle year and steering wheel variant before fitting. If your vehicle has a heated steering wheel or a sport multifunction wheel with additional paddle controls, verify connector compatibility first. Professional installation is recommended if you are unfamiliar with trim removal on this platform. Upgrade Your Range Rover Interior Today Explore the full range of premium interior upgrades for your L405 or L494 at Victorious Automotive — trusted by over 12,300 Range Rover owners worldwide. Shop L405 Vogue Accessories Shop L494 Sport Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover L405 & L494 · Interior Upgrades 2018-Style Window Switch Upgrade Kit for Range Rover L405 & Sport L494 (2013–2017) Bring your pre-facelift Range Rover's interior into the modern era with a direct-fit 2018-style window switch set — no wiring, no cutting, no compromise. L405 2013–2017 L494 2013–2017 Direct Clip-On Fit Silver & Black Illuminated Buttons Push Button Switches Weather Resistant 4-Piece Set Overview The Range Rover L405 Vogue and Range Rover Sport L494 produced between 2013 and 2017 represent some of Land Rover's most accomplished vehicles — refined, capable, and effortlessly commanding on any road. Yet for owners who've spent time in a post-facelift 2018 model, one detail stands out immediately: the updated window switch panel. It's a small change that carries a noticeable visual weight, and it's exactly the kind of detail that separates a well-kept interior from one that's been truly elevated. This window switch upgrade kit delivers that 2018-onwards aesthetic to pre-facelift L405 and L494 owners without any permanent modification. The four-piece set replaces your existing door-mounted switch surrounds and buttons with the cleaner, more contemporary design introduced with the facelift — complete with illuminated black push buttons and a refined silver and black finish that feels native to the Range Rover interior. Engineered for a precise clip-on fit, this kit requires no drilling, no wiring changes, and no specialist tools. It preserves every function of your existing switches while delivering a meaningful visual upgrade to one of the most-used touchpoints in your cabin. Whether you're prepping for sale, refreshing a tired interior, or simply bringing your L405 or L494 in line with later-model aesthetics, this is one of the cleanest upgrades available at this price point. What's Included 🪟 Window Switch Set (×4) Full set of four door switches — driver, passenger, and rear pair 💡 Illuminated Black Buttons Built-in illumination on each switch for night-time visibility 📄 Installation Instructions Step-by-step guide included in the package Product Highlights Clip-on installation — no permanent modification to your vehicle 2018-style facelift aesthetic for pre-facelift 2013–2017 models Illuminated push buttons for clear night-time operation Silver and black dual-tone finish matches OEM interior palette High-quality materials with a durable, scratch-resistant surface Weather-resistant and corrosion-resistant construction Protects underlying switch surrounds from daily wear Full four-door coverage in a single kit Compatible with both L405 Vogue and L494 Sport platforms No tools required — installs in minutes per door Compatibility Model Platform Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Vogue L405 2018–2021 Not Required Range Rover Sport L494 2018–2022 Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 minutes  |  🛠 Tools Required: None Begin with the driver's door. Ensure your windows are fully closed and the ignition is off before starting. Gently prise the existing window switch panel from the door card using your fingers — no tools needed. Note the orientation of the existing switches. Align the new 2018-style switch unit over the existing switch housing, ensuring the button positions correspond correctly to the original layout. Press the new switch panel firmly into place until you hear and feel the clips engage on all four corners. Test each button to confirm all window functions operate correctly before moving to the next door. Repeat for the front passenger door and both rear doors using the appropriately sized switch units from the set. Once all four are fitted, cycle the ignition and verify illumination on all switches at night or in low light. ⚠ Important: Verify your exact model year and platform (L405 or L494) before purchasing. Switch panel designs can vary slightly between production runs. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility for your VIN. Elevate Every Detail At Victorious Automotive, we source accessories that respect your Range Rover as much as you do. This switch upgrade is the kind of quiet, considered improvement that owners notice every single day — and it takes under half an hour to fit. Shop More L405 & L494 Upgrades Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and platform references (including L405, L494, Range Rover, and Range Rover Sport) are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling 2022 L460-Style Front Grille Upgrade for Range Rover Vogue L405 (2018–2021) Bring your pre-facelift L405 up to date with the bold, modern front-end language of the 2022 Range Rover L460 — available in Silver and Black finishes. Range Rover L405 2018–2021 L460 Grille Style Silver & Black Direct Fit Exterior Upgrade No Cutting Required Vogue Exterior Overview The Range Rover Vogue L405 remains one of the most commanding SUVs ever built — but the arrival of the fifth-generation L460 in 2022 introduced a sharper, more contemporary front-end aesthetic that many L405 owners have since admired from a distance. Now, you don't have to. This grille conversion brings the distinctive visual character of the 2022 L460 directly to your 2018–2021 L405, refreshing the face of your vehicle without the cost of a full model change. Designed specifically to integrate with the existing aperture of the L405 front bumper, this replacement grille requires no cutting, drilling, or structural modification. The mesh pattern, frame proportions, and overall surfacing are engineered to echo the L460's signature front-end treatment — giving your Range Rover a sharper, more modern presence on the road. Available in two refined finishes: classic Silver for those who prefer a light, premium contrast, and Gloss Black for a darker, more assertive look. At Victorious Automotive, every exterior upgrade we carry is selected with the discerning Range Rover owner in mind. This grille isn't simply a cosmetic novelty — it's a considered styling step that brings visual cohesion and contemporaneity to a platform that already has exceptional bones. Whether your L405 is a daily driver or a show-standard build, this conversion delivers an immediate and recognisable transformation. What's Included 🔲 L460-Style Front Grille One complete grille assembly in your chosen finish 🔩 Fitting Hardware Clips and fasteners required for installation 📋 Installation Guide Step-by-step fitting reference included 📦 Protective Packaging Securely packed to prevent transit damage Please Note: The Range Rover centre badge is not included. Your existing OEM badge can be transferred to the new grille during installation. Product Highlights L460 2022 grille design language faithfully replicated for the L405 platform Available in Silver and Gloss Black to suit your existing exterior colour scheme Direct-fit replacement — no cutting, drilling, or bumper modification required Precision-engineered to align with OEM mounting points and clip positions Lightweight yet rigid construction — built for long-term durability Designed to accommodate your existing OEM Range Rover centre badge Modern mesh pattern consistent with the fifth-generation L460 aesthetic Instantly updates the front-end profile of your pre-facelift L405 Compatible with both naturally aspirated and diesel L405 variants (2018–2021) Comes with all necessary fitting hardware included in the box Compatibility Vehicle Generation Year Range Fit Range Rover Vogue L405 (Facelift) 2018–2021 Direct Fit Range Rover Vogue L405 (Pre-Facelift) 2013–2017 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, flathead screwdriver Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work. Open the bonnet and carefully release the OEM grille retaining clips from behind the front bumper assembly using a trim removal tool. Gently pull the existing grille forward and away from the bumper aperture — take care not to stress the surrounding paintwork. If transferring your OEM Range Rover badge, remove it carefully from the original grille using a trim tool or heat gun set to low. Align the new L460-style grille with the bumper aperture, ensuring all mounting tabs correspond with the OEM clip positions. Press the grille firmly into place until all clips engage with an audible click — confirm a flush, rattle-free fitment on all sides. Reattach your OEM badge to the designated badge recess on the new grille, pressing firmly until seated. Close the bonnet and step back to inspect the fitment from distance — adjust as needed before driving. Important: This grille is designed specifically for the 2018–2021 L405 facelift generation only. Attempting to fit this to a pre-2018 L405 or any other Range Rover model may result in an incompatible fit. If you are unsure of your vehicle's generation or production date, please contact us before ordering: +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Range Rover's Front-End Today The 2022 L460 grille style is one of the most impactful single-piece exterior upgrades available for the L405. Clean, modern, and engineered to fit — shop the full Range Rover Vogue L405 exterior collection at Victorious Automotive. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Interior Upgrades Range Rover Vogue 2013–2017 Climate Control V2 Upgrade Screen (No CD Slot) Modernise your L405's centre console with a high-resolution touch screen that brings 2018-spec climate and seat comfort controls to pre-facelift Range Rover Vogues — in a clean, plug-and-play fitment. L405 Vogue 2013–2017 Plug & Play Touch Screen Climate Control Seat Comfort Controls No CD Slot V2 Upgrade Android Compatible Overview The Range Rover Vogue L405 arrived in 2013 as one of the most technologically advanced SUVs on the road, but time moves quickly in the luxury segment. Pre-facelift models built between 2013 and 2017 featured a climate control panel that — while functional — lacks the visual refinement and intuitive touch interaction that later revisions introduced. For owners who keep their L405 immaculately maintained, this mismatch between exterior presence and interior interface has always been a quiet frustration. The Climate Control V2 Upgrade Screen resolves that tension in a single fitment. Engineered to integrate directly with your existing HVAC, seat comfort, and ancillary systems, this high-resolution touch screen replaces the original climate panel entirely — adopting the same architectural language found in the 2018-onwards facelift models. The result is a console that looks factory-spec, feels entirely modern, and operates exactly as you'd expect from a vehicle of this calibre. Unlike generic aftermarket panels, this V2 screen has been developed specifically for the L405 platform. Every dial, button shortcut, and haptic interaction is mapped to match the original system's logic, meaning there is no relearning required and no compromise to the driving experience. If you want your pre-facelift Vogue to feel as current as the day it was designed to be, this is the upgrade that achieves it. What's Included 🖥️ Climate Control V2 Upgrade Screen 1 × high-resolution touch panel, pre-configured for L405 🔌 OEM-Match Wiring Harness Plug-and-play connector for direct fitment — no splicing required 🔩 Mounting Hardware All fixings needed to secure the screen in the OEM location 📄 Installation Guide Step-by-step printed instructions included in the box Product Highlights High-resolution touch screen with crisp, responsive display — replaces the original climate panel entirely Retains full dual-zone climate control functionality with intuitive rotary dial interface Seat comfort controls fully integrated — heated, ventilated, and massage settings all accessible Matches the visual design language of 2018-facelift L405 models for a cohesive, factory finish Plug-and-play installation using OEM connectors — no wiring modifications or coding required Compatible with existing Android head unit setups for a fully modernised interior Designed exclusively for the Range Rover Vogue L405 2013–2017 platform — precision fit guaranteed Clean no-CD-slot fascia delivers an uninterrupted, contemporary aesthetic to the centre console Retains all original system controls — nothing is lost, everything is improved Backed by Victorious Automotive's 30-day money-back guarantee and 4.9★ verified customer satisfaction Compatibility Vehicle Code Years Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue (Facelift) L405 2018–2021 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 Minutes  ·  Professional Install Recommended Ensure the vehicle is parked safely with the ignition off and the battery isolated before beginning any work on the centre console. Carefully remove the existing climate control panel from the dashboard using appropriate trim removal tools — take care not to damage the surrounding fascia or retention clips. Disconnect the OEM wiring harness from the back of the original unit by releasing the locking tab and pulling the connector free. Connect the included plug-and-play wiring harness to the V2 Upgrade Screen, then connect the opposing end to the vehicle's OEM connector — it will click securely into place. Seat the new screen into the dashboard aperture, ensuring all mounting points align correctly, then secure using the provided hardware. Reinstate the battery connection, power on the vehicle, and test all climate, seat comfort, and secondary functions to confirm full operation before refitting any trim panels. Refit all surrounding trim panels and conduct a final functional check across all touch inputs and dials. ⚠ Important: This screen replaces the CD player slot. If your vehicle's CD player is in active use, please consider this before purchasing. Professional installation is strongly recommended to avoid damage to the surrounding dashboard trim. Always disconnect the battery before beginning installation. Installation Videos Explore More for Your Range Rover Vogue L405 Browse the full Victorious Automotive collection for the Range Rover Vogue L405 — from interior upgrades to exterior refinements, every product is chosen for owners who demand the best from their vehicle. Shop Range Rover Vogue L405 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Front Grille Black & Silver Front Grille – Range Rover Vogue L405 2018–2022 Style Upgrade Refresh the face of your L405 Vogue with a bold black and silver grille that replicates the post-2018 factory aesthetic — no cutting, no drilling, no compromise. L405 Vogue 2018–2022 Style ABS Plastic Black & Silver Finish Direct Fit No Drilling Required 2013–2017 Upgrade Front Grille Overview The Range Rover Vogue L405 is one of the most commanding full-size SUVs ever produced — a vehicle that turns heads before it even moves. But if your L405 was built before 2018, its front grille may be showing its age next to the more refined, face-lifted examples that followed. The post-2018 grille treatment introduced a sharper contrast finish with a blacked-out surround and polished silver mesh inlay that instantly modernises the front fascia. This black and silver front grille is precision-engineered to replicate that updated 2018–2022 aesthetic, designed specifically for L405 Vogue models produced between 2013 and 2017. It slots directly into your existing grille aperture using the original mounting points — no modifications, no bodywork, and no specialist tools required. The result is a clean, factory-quality appearance transformation that takes an afternoon, not a workshop visit. Crafted from high-grade ABS plastic with a UV-resistant finish, this grille is built to withstand the elements without fading, cracking, or losing its finish. Whether you're refreshing a pre-facelift Vogue or simply want a more assertive front-end look, this is one of the most impactful single upgrades available for the L405 platform. What's Included 🔲 Front Grille Assembly Black surround with silver mesh inlay, 2018–2022 style 🔩 Mounting Hardware OEM-style clips and fasteners for secure fitment 📄 Installation Guide Step-by-step fitting reference included Product Highlights Replicates the updated 2018–2022 Range Rover Vogue L405 grille design Bold two-tone black surround and polished silver mesh finish High-grade ABS plastic construction for durability and rigidity UV-resistant coating prevents fading, chalking, and colour shift Direct-fit replacement — uses original factory mounting points No drilling, cutting, or bodywork modifications required Compatible with pre-facelift L405 Vogue models (2013–2017) Maintains full grille airflow — no impact on cooling or radiator access Lightweight construction adds no meaningful weight penalty Transforms the front fascia in a single, confident upgrade Compatibility Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–2022 Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2017–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner · Estimated Time: 45–90 Minutes · Tools Required: Trim removal tool, T20 Torx bit, flathead screwdriver Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the front end. Open the bonnet and locate the upper grille retaining clips and fasteners along the top edge of the grille surround. Using a trim removal tool, carefully release the factory clips across the top and sides of the existing grille assembly — work slowly to avoid cracking the surrounding bumper trim. Remove the original grille by pulling it forward and disengaging the lower tabs from the bumper aperture. Set it aside safely. Offer up the new black and silver grille to the aperture, aligning the upper mounting tabs with the factory positions along the top edge. Press the grille firmly into place from the centre outward, ensuring each clip and lower tab seats fully and audibly clicks into position. Reattach any Torx fasteners that were removed during disassembly and perform a final visual check around the perimeter for any gaps or misalignment. Close the bonnet and step back to inspect the finished result before driving the vehicle. ⚠ Important: Confirm your exact build year and grille aperture dimensions before ordering. Pre-2018 L405 models share the same aperture dimensions, but trim finisher clips may vary slightly between early and late pre-facelift builds. If in doubt, contact our team on +44 203 943 9919 before fitting. Upgrade Your L405 Vogue Today This is one of the cleanest, most cost-effective ways to bring a pre-facelift Range Rover Vogue up to the refined 2018-onward aesthetic — no paint, no bodywork, no hassle. Explore the full L405 Vogue collection for complementary upgrades. Shop All L405 Vogue Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes are referenced solely for fitment compatibility purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Front Grille All Black Front Grille Upgrade for Range Rover Vogue L405 — 2018–2022 Facelift Style Transform the face of your L405 Vogue instantly with a stealth all-black grille finished to 2018 facelift specification — a definitive visual statement with no cutting, no fabrication, and no compromise. L405 2013–2022 All Black Finish Direct Fit Front Grille Facelift Upgrade ABS Construction No Cutting Required Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — and the front grille is its defining feature. Whether you're driving a pre-facelift 2013–2017 model or a later variant, this grille upgrade brings your Vogue in line with the more aggressive, darkened aesthetic of the 2018 onwards specification, delivering a commanding presence that turns heads for all the right reasons. This all-black grille has been engineered to replace the standard factory unit with no modifications to your vehicle's bodywork or bumper. The blacked-out finish removes the chrome and replaces it with a uniform dark aesthetic that complements stealth builds, black pack specifications, and owners who simply want their Vogue to look sharper, more purposeful, and more modern. Unlike generic aftermarket parts, this grille is precision-shaped to the exact contours of the L405 front bumper aperture. The fit is clean, the lines align correctly, and the overall finish is consistent with the premium standard Range Rover owners expect. If you've been considering a facelift-style refresh without the cost of a full bumper conversion, this grille is the most impactful single change you can make. What's Included 🖤 All Black Front Grille 2018–2022 facelift style, L405 fitment 🔩 Fitting Hardware Clips and fixings for secure installation 📋 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights Precision-engineered fitment for L405 front bumper aperture Uniform all-black finish — no chrome, no contrast trim 2018 facelift grille style compatible with pre-facelift models High-quality ABS construction — lightweight and durable No cutting, drilling, or bodywork modification required Clips directly onto existing mounting points Consistent panel gaps for a factory-quality appearance Ideal for black pack, stealth, and SVO-inspired builds Compatible with standard front parking sensors Shipped worldwide via DHL, FedEx, UPS or TNT Compatibility Model Code Year Range Fit Range Rover Vogue L405 2013–2017 (Pre-Facelift) Direct Fit Range Rover Vogue L405 2018–2022 (Facelift) Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, flathead screwdriver Park the vehicle on a level surface and ensure the engine is off and fully cool before beginning work near the front fascia. Open the bonnet and locate the upper grille retaining clips along the top edge of the front bumper assembly. Gently release using a trim removal tool. Working from the top down, carefully unclip the factory grille from the bumper aperture. Take care not to apply excessive force to the surrounding paintwork or bumper trim. Disconnect any ambient lighting or chrome surround clips if applicable to your variant and set the original grille aside safely. Align the new all-black grille into the aperture, starting from the lower edge and pressing firmly at each clip point until all retaining clips engage with an audible click. Secure the upper clips and check that the panel gaps are even and consistent across the full width of the grille. Step back and inspect the fitment from distance. Make any minor adjustments before closing the bonnet. Important: If your L405 is fitted with an active grille shutter system or front-facing camera mounted within the grille surround, please confirm component clearance before installation. We recommend professional fitting if you are unsure about any sensor or camera routing near the front bumper aperture. Complete Your L405 Build Explore the full range of premium accessories for the Range Rover Vogue L405 at Victorious Automotive — trusted by over 12,300 Range Rover owners worldwide. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Front Centre Grille Hood Insert for Range Rover Vogue L405 (2014–2017) – Gloss Black Bumper Upgrade A precision-formed ABS grille insert that replaces the factory front bumper centre trim with a sharper, more aggressive aesthetic — engineered to fit your 2014–2017 Range Rover Vogue L405 without modification. Range Rover Vogue L405 2014–2017 ABS Construction Gloss Black Direct Replacement Front Bumper Hood Insert No Drilling Required Exterior Styling Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that rewards considered modifications with a look that genuinely distinguishes itself from the factory standard. The front fascia, in particular, is one area where subtle upgrades deliver outsized visual impact. The centre grille insert sits at the heart of that first impression. This Front Centre Grille Hood Insert is designed specifically for the 2014–2017 Range Rover Vogue L405 facelift generation. Formed from durable ABS thermoplastic and finished in a deep gloss black, it replaces the factory bumper centre surround with a cleaner, more assertive profile. The result is a more cohesive front-end appearance — particularly effective on vehicles already running black pack trim, darkened badges, or upgraded alloy wheels. The fitment is engineered as a direct replacement, meaning no cutting, drilling, or permanent modification to your vehicle. Installation is clean and reversible — making this an ideal first step in a broader exterior styling programme, or simply a standalone refresh for owners looking to modernise the Vogue's front end without straying from its inherent elegance. What's Included 🔲 Front Centre Grille Insert Gloss black ABS — qty 1, pre-formed to OEM profile 📄 Installation Guide Step-by-step fitting instructions included 🔩 Mounting Hardware Clips and fixings for secure, rattle-free attachment Product Highlights Designed exclusively for Range Rover Vogue L405 (2014–2017) — no universal fitment compromises Deep gloss black ABS finish complements black pack, dark chrome, and stealth styling packages Direct OEM-replacement fit — installs into existing mounting points without modification Lightweight yet rigid ABS thermoplastic construction withstands road vibration and weather exposure Enhances the front fascia with a more purposeful, contemporary aesthetic Fully reversible installation — original grille can be refitted at any time No specialist tools or workshop equipment required for fitting UV-stabilised finish resists fading and surface degradation over time Pairs naturally with gloss black badge overlays, window tint, and black alloy upgrades Clean, factory-level finish from the front — no visible fixings or gaps when installed correctly Compatibility Vehicle Code Year Range Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Vogue L405 2013 (pre-facelift) Verify Before Order Range Rover Vogue L405 2018–2021 (facelift) Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Park the vehicle on a flat surface with the engine off and fully cooled. Ensure you have adequate lighting and clear access to the front bumper. Carefully locate and remove the factory front bumper centre grille insert by releasing the OEM retaining clips — use a trim removal tool to avoid scratching surrounding surfaces. Fully remove the original insert and set aside. Clean the mounting area with a damp cloth and allow to dry before fitting the new grille. Align the new gloss black grille insert into the bumper aperture, ensuring all mounting tabs are correctly seated in their corresponding clip positions. Apply firm, even pressure across the grille face to engage all retaining clips until you hear or feel them click into place. Check for any gaps or flex along the perimeter. Step back and inspect the fitment from multiple angles under good light before considering the installation complete. No adhesive is required. ⚠ Please Note: Confirm your exact model year and bumper variant before purchasing. The 2013 pre-facelift L405 uses a slightly different front bumper profile that may not accept this insert without modification. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Vogue's Front End Thousands of Range Rover owners trust Victorious Automotive for exterior upgrades that look factory-correct and fit without compromise. Browse our full Range Rover Vogue L405 collection for complementary styling pieces — or call our specialists if you need guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment and compatibility purposes. All trademarks remain the property of their respective owners.

Victorious · Range Rover Vogue/Sport · Interior Tech Wireless Phone Charger for Range Rover Vogue & Sport (2013–2017) Premium wireless charging integrated seamlessly into your cubby—zero clutter, constant power, perfect fit. L405 / L494 2013–2017 Wireless Qi Charging Non-Slip Mat ACC Power Plug & Play Overview For Range Rover Vogue (L405) and Sport (L494) owners between 2013 and 2017, the interior tech landscape was genuinely ahead of its time. Yet even Land Rover couldn't predict the universal shift to wireless charging. This charger closes that gap, nestling perfectly into your vehicle's cubby space and transforming it into an intelligent power zone. Simply place any Qi-enabled device on the pad and charging begins instantly—no hunting for cables, no tangled mess on your centre console. The non-slip mat grips your phone securely through corners and motorway merges. Built to Range Rover standards of durability and finish, it integrates so naturally you'll wonder how you ever drove without it. Whether you're managing navigation, music streaming, or hands-free calling, a fully charged phone is no longer a luxury—it's essential. This charger keeps you powered from Knightsbridge to the Scottish Highlands. What's Included ⚡ Wireless Charger Pad Premium Qi-enabled charging surface with non-slip mat 🔌 ACC Power Cable Direct-wire connection to vehicle accessory circuit 📖 User Manual Step-by-step installation and operation guide ✓ Qualification Document Compatibility and warranty certification Product Highlights Qi-Standard Wireless Charging – Compatible with all modern Qi-enabled phones Precision Cubby Fit – Engineered for L405 and L494 centre console geometry Non-Slip Surface – Rubber mat prevents movement on motorway and off-road terrain ACC Power Integration – Wired to accessory circuit, powers down with ignition Zero Clutter – Eliminates cable sprawl and charging cable damage Intuitive Use – Place phone, begin charging—no buttons, no faffing Premium Materials – Aluminium housing, durable rubber mat, premium finish Quick Installation – Plug-and-play; no specialist tools required Universal Phone Support – Works with iPhone 8+, Samsung, Google Pixel, and all Qi devices Reliable Power Delivery – 5W charge output, optimised for in-vehicle use Compatibility Range Rover Model Year Range Status Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Sport (L494) 2013–2017 Direct Fit Range Rover Vogue (L460) 2022–2026 Not Compatible Range Rover Sport (L461) 2022–2026 Not Compatible Range Rover Velar 2018–2022 Not Compatible Range Rover Evoque All years Not Compatible Installation Notes Installation Difficulty: Easy | Time: 15–20 minutes Park your Range Rover on level ground with ignition off. Open the cubby compartment in the centre console and inspect the space. Locate the ACC (accessory) power point or trace the existing cubby wiring harness. Position the charger pad in the cubby, ensuring it sits flush and level. Connect the ACC power cable to the vehicle's accessory circuit (see manual for terminal location). Test charging by placing a Qi-enabled device on the pad; LED indicator should illuminate. Close the cubby carefully and verify charger alignment. Drive a short distance to confirm stable operation and secure mounting. Important: Ensure your phone supports Qi wireless charging. Some older or rugged phones may not be compatible. Do not force the charger into the cubby; it should seat naturally. If you're uncomfortable with ACC wiring, contact an authorised Land Rover technician. Ready to Upgrade Your Vogue or Sport? Transform your cubby into an intelligent charging hub. Say goodbye to cable clutter and hello to seamless, effortless power. Order now and enjoy premium wireless charging engineered for your Range Rover. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews ✓ 30-Day Money-Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All product names and vehicle designations are used for reference and compatibility purposes only. Please verify compatibility with your specific vehicle model before purchase.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Silver & Gold Door Window Switch Frame Trim for Range Rover Vogue L405 & Range Rover Sport L494 (2013–2021) Crystal-embellished door switch frame trims that bring Swarovski-style sparkle and bespoke character to your Range Rover's interior in under two minutes. Range Rover Vogue L405 Range Rover Sport L494 2013–2021 Silver & Gold Swarovski-Style Crystals Chrome Accents 4-Piece Set No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent two of the most respected luxury SUVs ever produced — cabins defined by clean lines, premium materials, and a sense of composed sophistication. For owners who want to take that interior aesthetic one step further, the door window switch surrounds are a subtle but immediately visible canvas for personalisation. These door window switch frame trims are precision-cut to sit flush over the existing switch panels on all four doors, replacing the factory-finish surround with a statement piece finished in your choice of Silver or Gold. Each trim is studded with Swarovski-style crystals and framed with chrome detailing — delivering a diamond-cut sparkle that catches the light beautifully without overwhelming the cabin's original character. The appeal here is in the detail. Whether you're stepping into your Vogue after a long day or chauffeuring guests in your Sport, these trims communicate care and individuality. They fit using pre-applied adhesive backing, meaning installation requires no tools, no drilling, and no specialist knowledge — just a clean surface and two minutes of your time. What's Included 💎 Front Left Door Trim Crystal & chrome switch frame surround 💎 Front Right Door Trim Crystal & chrome switch frame surround 💎 Rear Left Door Trim Crystal & chrome switch frame surround 💎 Rear Right Door Trim Crystal & chrome switch frame surround 🔧 Pre-Applied Adhesive 3M-style backing — no tools required 📋 Fitting Instructions Step-by-step guide included in packaging Product Highlights Precision-cut to match L405 Vogue and L494 Sport door switch panel geometry exactly Available in Silver and Gold finishes to complement both light and dark interior colourways Swarovski-style crystal embellishments for genuine luxury sparkle Chrome and diamond-cut detailing frames each trim for added visual depth Pre-applied adhesive backing means zero tools and zero damage to factory panels Full four-door coverage in a single set — front and rear doors included Slim profile sits flush to the door card surface without any unsightly gaps Durable construction resists daily contact, UV light, and interior temperature fluctuations Reversible upgrade — trims can be removed without leaving residue on factory panels Installation takes under two minutes per door — complete the full set in one go Compatibility Model Code Year Range Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 5–10 minutes (full set) Start with a clean, dry interior. Use an isopropyl alcohol wipe to degrease the existing door switch frame surround on each door — this ensures maximum adhesive bond. Unwrap each trim piece and identify which piece corresponds to each door (front left, front right, rear left, rear right). Test the fit dry before peeling the adhesive backing. Peel the protective film from the adhesive backing on the first trim piece. Align the trim carefully over the switch surround, starting from one edge and pressing down gradually to avoid air bubbles. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond fully. Repeat for all four doors. Allow 30 minutes for the adhesive to fully cure before operating the windows repeatedly. ⚠ Important: Please verify your vehicle's model code (L405 or L494) and model year before ordering. Switch panel geometry changed significantly with the 2022 model year refresh on both the Vogue (L460) and Sport (L461). This product is not compatible with 2022 and newer variants. Elevate Every Detail At Victorious Automotive, we believe the finest Range Rovers are defined by the details their owners choose. These door switch frame trims are a simple, reversible, and genuinely beautiful upgrade for any L405 or L494 interior. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Buying 2 or more items? Use code 22GET20 for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG; this product uses Swarovski-style crystals and is not affiliated with or endorsed by Swarovski AG.